Merge pull request #7788 from esphome/bump-2024.11.0b4

2024.11.0b4

.devcontainer/devcontainer.json

@@ -5,33 +5,59 @@
     "script/devcontainer-post-create"
   ],
   "containerEnv": {
-    "DEVCONTAINER": "1"
+    "DEVCONTAINER": "1",
+    "PIP_BREAK_SYSTEM_PACKAGES": "1",
+    "PIP_ROOT_USER_ACTION": "ignore"
   },
   "runArgs": [
     "--privileged",
     "-e",
     "ESPHOME_DASHBOARD_USE_PING=1"
+    // uncomment and edit the path in order to pass though local USB serial to the conatiner
+    // , "--device=/dev/ttyACM0"
   ],
   "appPort": 6052,
+  // if you are using avahi in the host device, uncomment these to allow the
+  // devcontainer to find devices via mdns
+  //"mounts": [
+  //  "type=bind,source=/dev/bus/usb,target=/dev/bus/usb",
+  //  "type=bind,source=/var/run/dbus,target=/var/run/dbus",
+  //  "type=bind,source=/var/run/avahi-daemon/socket,target=/var/run/avahi-daemon/socket"
+  //],
   "customizations": {
     "vscode": {
       "extensions": [
         // python
         "ms-python.python",
+        "ms-python.pylint",
+        "ms-python.flake8",
+        "ms-python.black-formatter",
         "visualstudioexptteam.vscodeintellicode",
         // yaml
         "redhat.vscode-yaml",
         // cpp
         "ms-vscode.cpptools",
         // editorconfig
-        "editorconfig.editorconfig",
+        "editorconfig.editorconfig"
       ],
       "settings": {
         "python.languageServer": "Pylance",
         "python.pythonPath": "/usr/bin/python3",
-        "python.linting.pylintEnabled": true,
-        "python.linting.enabled": true,
-        "python.formatting.provider": "black",
+        "pylint.args": [
+          "--rcfile=${workspaceFolder}/pyproject.toml"
+        ],
+        "flake8.args": [
+          "--config=${workspaceFolder}/.flake8"
+        ],
+        "black-formatter.args": [
+          "--config",
+          "${workspaceFolder}/pyproject.toml"
+        ],
+        "[python]": {
+          // VS will say "Value is not accepted" before building the devcontainer, but the warning
+          // should go away after build is completed.
+          "editor.defaultFormatter": "ms-python.black-formatter"
+        },
         "editor.formatOnPaste": false,
         "editor.formatOnSave": true,
         "editor.formatOnType": true,
@@ -41,6 +67,7 @@
           "!secret scalar",
           "!lambda scalar",
           "!extend scalar",
+          "!remove scalar",
           "!include_dir_named scalar",
           "!include_dir_list scalar",
           "!include_dir_merge_list scalar",

.dockerignore

@@ -75,6 +75,9 @@ target/
 # pyenv
 .python-version
 
+# asdf
+.tool-versions
+
 # celery beat schedule file
 celerybeat-schedule
 

.flake8

@@ -1,20 +1,3 @@
-[metadata]
-license      = MIT
-license_file = LICENSE
-platforms = any
-description  = Make creating custom firmwares for ESP32/ESP8266 super easy.
-long_description = file: README.md
-keywords     = home, automation
-classifier =
-    Environment :: Console
-    Intended Audience :: Developers
-    Intended Audience :: End Users/Desktop
-    License :: OSI Approved :: MIT License
-    Programming Language :: C++
-    Programming Language :: Python :: 3
-    Topic :: Home Automation
-Topic :: Home Automation
-
 [flake8]
 max-line-length = 120
 # Following 4 for black compatibility
@@ -38,25 +21,22 @@ max-line-length = 120
 # D401 First line should be in imperative mood
 
 ignore =
-    E501,
-    W503,
-    E203,
-    D202,
+  E501,
+  W503,
+  E203,
+  D202,
 
-    D100,
-    D101,
-    D102,
-    D103,
-    D104,
-    D105,
-    D107,
-    D200,
-    D205,
-    D209,
-    D400,
-    D401,
+  D100,
+  D101,
+  D102,
+  D103,
+  D104,
+  D105,
+  D107,
+  D200,
+  D205,
+  D209,
+  D400,
+  D401,
 
 exclude = api_pb2.py
-
-[bdist_wheel]
-universal = 1

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,11 +7,16 @@
 - [ ] Bugfix (non-breaking change which fixes an issue)
 - [ ] New feature (non-breaking change which adds functionality)
 - [ ] Breaking change (fix or feature that would cause existing functionality to not work as expected)
+- [ ] Code quality improvements to existing code or addition of tests
 - [ ] Other
 
-**Related issue or feature (if applicable):** fixes <link to issue>
+**Related issue or feature (if applicable):**
 
-**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here>
+- fixes <link to issue>
+
+**Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):**
+
+- esphome/esphome-docs#<esphome-docs PR number goes here>
 
 ## Test Environment
 
@@ -19,14 +24,10 @@
 - [ ] ESP32 IDF
 - [ ] ESP8266
 - [ ] RP2040
+- [ ] BK72xx
+- [ ] RTL87xx
 
 ## Example entry for `config.yaml`:
-<!--
-  Supplying a configuration snippet, makes it easier for a maintainer to test
-  your PR. Furthermore, for new integrations, it gives an impression of how
-  the configuration would look like.
-  Note: Remove this section if this PR does not have an example entry.
--->
 
 ```yaml
 # Example config.yaml

.github/actions/build-image/action.yaml

@@ -0,0 +1,97 @@
+name: Build Image
+inputs:
+  platform:
+    description: "Platform to build for"
+    required: true
+    example: "linux/amd64"
+  target:
+    description: "Target to build"
+    required: true
+    example: "docker"
+  baseimg:
+    description: "Base image type"
+    required: true
+    example: "docker"
+  suffix:
+    description: "Suffix to add to tags"
+    required: true
+  version:
+    description: "Version to build"
+    required: true
+    example: "2023.12.0"
+runs:
+  using: "composite"
+  steps:
+    - name: Generate short tags
+      id: tags
+      shell: bash
+      run: |
+        output=$(docker/generate_tags.py \
+          --tag "${{ inputs.version }}" \
+          --suffix "${{ inputs.suffix }}")
+        echo $output
+        for l in $output; do
+          echo $l >> $GITHUB_OUTPUT
+        done
+
+    # set cache-to only if dev branch
+    - id: cache-to
+      shell: bash
+      run: |-
+        if [[ "${{ github.ref }}" == "refs/heads/dev" ]]; then
+          echo "value=type=gha,mode=max" >> $GITHUB_OUTPUT
+        else
+          echo "value=" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Build and push to ghcr by digest
+      id: build-ghcr
+      uses: docker/build-push-action@v6.9.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
+      with:
+        context: .
+        file: ./docker/Dockerfile
+        platforms: ${{ inputs.platform }}
+        target: ${{ inputs.target }}
+        cache-from: type=gha
+        cache-to: ${{ steps.cache-to.outputs.value }}
+        build-args: |
+          BASEIMGTYPE=${{ inputs.baseimg }}
+          BUILD_VERSION=${{ inputs.version }}
+        outputs: |
+          type=image,name=ghcr.io/${{ steps.tags.outputs.image_name }},push-by-digest=true,name-canonical=true,push=true
+
+    - name: Export ghcr digests
+      shell: bash
+      run: |
+        mkdir -p /tmp/digests/${{ inputs.target }}/ghcr
+        digest="${{ steps.build-ghcr.outputs.digest }}"
+        touch "/tmp/digests/${{ inputs.target }}/ghcr/${digest#sha256:}"
+
+    - name: Build and push to dockerhub by digest
+      id: build-dockerhub
+      uses: docker/build-push-action@v6.9.0
+      env:
+        DOCKER_BUILD_SUMMARY: false
+        DOCKER_BUILD_RECORD_UPLOAD: false
+      with:
+        context: .
+        file: ./docker/Dockerfile
+        platforms: ${{ inputs.platform }}
+        target: ${{ inputs.target }}
+        cache-from: type=gha
+        cache-to: ${{ steps.cache-to.outputs.value }}
+        build-args: |
+          BASEIMGTYPE=${{ inputs.baseimg }}
+          BUILD_VERSION=${{ inputs.version }}
+        outputs: |
+          type=image,name=docker.io/${{ steps.tags.outputs.image_name }},push-by-digest=true,name-canonical=true,push=true
+
+    - name: Export dockerhub digests
+      shell: bash
+      run: |
+        mkdir -p /tmp/digests/${{ inputs.target }}/dockerhub
+        digest="${{ steps.build-dockerhub.outputs.digest }}"
+        touch "/tmp/digests/${{ inputs.target }}/dockerhub/${digest#sha256:}"

.github/actions/restore-python/action.yml

@@ -17,22 +17,31 @@ runs:
   steps:
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v4.6.0
+      uses: actions/setup-python@v5.3.0
       with:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment
       id: cache-venv
-      uses: actions/cache/restore@v3.3.1
+      uses: actions/cache/restore@v4.1.2
       with:
         path: venv
         # yamllint disable-line rule:line-length
         key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ inputs.cache-key }}
     - name: Create Python virtual environment
-      if: steps.cache-venv.outputs.cache-hit != 'true'
+      if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os != 'Windows'
       shell: bash
       run: |
         python -m venv venv
-        . venv/bin/activate
+        source venv/bin/activate
+        python --version
+        pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+        pip install -e .
+    - name: Create Python virtual environment
+      if: steps.cache-venv.outputs.cache-hit != 'true' && runner.os == 'Windows'
+      shell: bash
+      run: |
+        python -m venv venv
+        ./venv/Scripts/activate
         python --version
         pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
         pip install -e .

.github/dependabot.yml

@@ -13,3 +13,20 @@ updates:
     schedule:
       interval: daily
     open-pull-requests-limit: 10
+    groups:
+      docker-actions:
+        applies-to: version-updates
+        patterns:
+          - "docker/setup-qemu-action"
+          - "docker/login-action"
+          - "docker/setup-buildx-action"
+  - package-ecosystem: github-actions
+    directory: "/.github/actions/build-image"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10
+  - package-ecosystem: github-actions
+    directory: "/.github/actions/restore-python"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10

.github/workflows/ci-api-proto.yml

@@ -0,0 +1,80 @@
+name: API Proto CI
+
+on:
+  pull_request:
+    paths:
+      - "esphome/components/api/api.proto"
+      - "esphome/components/api/api_pb2.cpp"
+      - "esphome/components/api/api_pb2.h"
+      - "esphome/components/api/api_pb2_service.cpp"
+      - "esphome/components/api/api_pb2_service.h"
+      - "script/api_protobuf/api_protobuf.py"
+      - ".github/workflows/ci-api-proto.yml"
+
+permissions:
+  contents: read
+  pull-requests: write
+
+jobs:
+  check:
+    name: Check generated files
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.3.0
+        with:
+          python-version: "3.11"
+
+      - name: Install apt dependencies
+        run: |
+          sudo apt update
+          sudo apt-cache show protobuf-compiler
+          sudo apt install -y protobuf-compiler
+          protoc --version
+      - name: Install python dependencies
+        run: pip install aioesphomeapi -c requirements.txt -r requirements_dev.txt
+      - name: Generate files
+        run: script/api_protobuf/api_protobuf.py
+      - name: Check for changes
+        run: |
+          if ! git diff --quiet; then
+            echo "## Job Failed" | tee -a $GITHUB_STEP_SUMMARY
+            echo "You have altered the generated proto files but they do not match what is expected." | tee -a $GITHUB_STEP_SUMMARY
+            echo "Please run 'script/api_protobuf/api_protobuf.py' and commit the changes." | tee -a $GITHUB_STEP_SUMMARY
+            exit 1
+          fi
+      - if: failure()
+        name: Review PR
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            await github.rest.pulls.createReview({
+              pull_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              event: 'REQUEST_CHANGES',
+              body: 'You have altered the generated proto files but they do not match what is expected.\nPlease run "script/api_protobuf/api_protobuf.py" and commit the changes.'
+            })
+      - if: success()
+        name: Dismiss review
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            let reviews = await github.rest.pulls.listReviews({
+              pull_number: context.issue.number,
+              owner: context.repo.owner,
+              repo: context.repo.repo
+            });
+            for (let review of reviews.data) {
+              if (review.user.login === 'github-actions[bot]' && review.state === 'CHANGES_REQUESTED') {
+                await github.rest.pulls.dismissReview({
+                  pull_number: context.issue.number,
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  review_id: review.id,
+                  message: 'Files now match the expected proto files.'
+                });
+              }
+            }

.github/workflows/ci-docker.yml

@@ -2,13 +2,13 @@
 name: CI for docker images
 
 # Only run when docker paths change
-# yamllint disable-line rule:truthy
+
 on:
   push:
     branches: [dev, beta, release]
     paths:
       - "docker/**"
-      - ".github/workflows/**"
+      - ".github/workflows/ci-docker.yml"
       - "requirements*.txt"
       - "platformio.ini"
       - "script/platformio_install_deps.py"
@@ -16,7 +16,7 @@ on:
   pull_request:
     paths:
       - "docker/**"
-      - ".github/workflows/**"
+      - ".github/workflows/ci-docker.yml"
       - "requirements*.txt"
       - "platformio.ini"
       - "script/platformio_install_deps.py"
@@ -40,15 +40,15 @@ jobs:
         arch: [amd64, armv7, aarch64]
         build_type: ["ha-addon", "docker", "lint"]
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.9"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
+        uses: docker/setup-buildx-action@v3.7.1
       - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: docker/setup-qemu-action@v3.2.0
 
       - name: Set TAG
         run: |

.github/workflows/ci.yml

@@ -1,12 +1,18 @@
 ---
 name: CI
 
-# yamllint disable-line rule:truthy
 on:
   push:
     branches: [dev, beta, release]
 
   pull_request:
+    paths:
+      - "**"
+      - "!.github/workflows/*.yml"
+      - "!.github/actions/build-image/*"
+      - ".github/workflows/ci.yml"
+      - "!.yamllint"
+      - "!.github/dependabot.yml"
   merge_group:
 
 permissions:
@@ -15,7 +21,6 @@ permissions:
 env:
   DEFAULT_PYTHON: "3.9"
   PYUPGRADE_TARGET: "--py39-plus"
-  CLANG_FORMAT_VERSION: "13.0.1"
 
 concurrency:
   # yamllint disable-line rule:line-length
@@ -30,18 +35,18 @@ jobs:
       cache-key: ${{ steps.cache-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Generate cache-key
         id: cache-key
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v4.6.0
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v3.3.1
+        uses: actions/cache@v4.1.2
         with:
           path: venv
           # yamllint disable-line rule:line-length
@@ -55,15 +60,6 @@ jobs:
           pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
           pip install -e .
 
-  yamllint:
-    name: yamllint
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
-      - name: Run yamllint
-        uses: frenck/action-yamllint@v1.4.1
-
   black:
     name: Check black
     runs-on: ubuntu-latest
@@ -71,7 +67,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -92,7 +88,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -113,7 +109,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -134,7 +130,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -155,7 +151,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -171,23 +167,61 @@ jobs:
 
   pytest:
     name: Run pytest
-    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        python-version:
+          - "3.9"
+          - "3.10"
+          - "3.11"
+          - "3.12"
+        os:
+          - ubuntu-latest
+          - macOS-latest
+          - windows-latest
+        exclude:
+          # Minimize CI resource usage
+          # by only running the Python version
+          # version used for docker images on Windows and macOS
+          - python-version: "3.12"
+            os: windows-latest
+          - python-version: "3.10"
+            os: windows-latest
+          - python-version: "3.9"
+            os: windows-latest
+          - python-version: "3.12"
+            os: macOS-latest
+          - python-version: "3.10"
+            os: macOS-latest
+          - python-version: "3.9"
+            os: macOS-latest
+    runs-on: ${{ matrix.os }}
     needs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
+          python-version: ${{ matrix.python-version }}
           cache-key: ${{ needs.common.outputs.cache-key }}
       - name: Register matcher
         run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
       - name: Run pytest
+        if: matrix.os == 'windows-latest'
+        run: |
+          ./venv/Scripts/activate
+          pytest -vv --cov-report=xml --tb=native tests
+      - name: Run pytest
+        if: matrix.os == 'ubuntu-latest' || matrix.os == 'macOS-latest'
         run: |
           . venv/bin/activate
-          pytest -vv --tb=native tests
+          pytest -vv --cov-report=xml --tb=native tests
+      - name: Upload coverage to Codecov
+        uses: codecov/codecov-action@v4
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
 
   clang-format:
     name: Check clang-format
@@ -196,7 +230,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -205,7 +239,7 @@ jobs:
       - name: Install clang-format
         run: |
           . venv/bin/activate
-          pip install clang-format==${{ env.CLANG_FORMAT_VERSION }}
+          pip install clang-format -c requirements_dev.txt
       - name: Run clang-format
         run: |
           . venv/bin/activate
@@ -215,37 +249,6 @@ jobs:
         run: script/ci-suggest-changes
         if: always()
 
-  compile-tests:
-    name: Run YAML test ${{ matrix.file }}
-    runs-on: ubuntu-latest
-    needs:
-      - common
-      - black
-      - ci-custom
-      - clang-format
-      - flake8
-      - pylint
-      - pytest
-      - pyupgrade
-      - yamllint
-    strategy:
-      fail-fast: false
-      max-parallel: 2
-      matrix:
-        file: [1, 2, 3, 3.1, 4, 5, 6, 7, 8]
-    steps:
-      - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
-      - name: Restore Python
-        uses: ./.github/actions/restore-python
-        with:
-          python-version: ${{ env.DEFAULT_PYTHON }}
-          cache-key: ${{ needs.common.outputs.cache-key }}
-      - name: Run esphome compile tests/test${{ matrix.file }}.yaml
-        run: |
-          . venv/bin/activate
-          esphome compile tests/test${{ matrix.file }}.yaml
-
   clang-tidy:
     name: ${{ matrix.name }}
     runs-on: ubuntu-latest
@@ -258,7 +261,6 @@ jobs:
       - pylint
       - pytest
       - pyupgrade
-      - yamllint
     strategy:
       fail-fast: false
       max-parallel: 2
@@ -291,27 +293,44 @@ jobs:
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v3.5.2
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
           cache-key: ${{ needs.common.outputs.cache-key }}
+
       - name: Cache platformio
-        uses: actions/cache@v3.3.1
+        if: github.ref == 'refs/heads/dev'
+        uses: actions/cache@v4.1.2
         with:
           path: ~/.platformio
-          # yamllint disable-line rule:line-length
-          key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
+          key: platformio-${{ matrix.pio_cache_key }}
+
+      - name: Cache platformio
+        if: github.ref != 'refs/heads/dev'
+        uses: actions/cache/restore@v4.1.2
+        with:
+          path: ~/.platformio
+          key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
-        run: sudo apt-get install clang-tidy-14
+        run: |
+          sudo apt-get update
+          sudo apt-get install clang-tidy-14
 
       - name: Register problem matchers
         run: |
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
           echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
+      - name: Run 'pio run --list-targets -e esp32-idf-tidy'
+        if: matrix.name == 'Run script/clang-tidy for ESP32 IDF'
+        run: |
+          . venv/bin/activate
+          mkdir -p .temp
+          pio run --list-targets -e esp32-idf-tidy
+
       - name: Run clang-tidy
         run: |
           . venv/bin/activate
@@ -325,6 +344,143 @@ jobs:
         # yamllint disable-line rule:line-length
         if: always()
 
+  list-components:
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    if: github.event_name == 'pull_request'
+    outputs:
+      components: ${{ steps.list-components.outputs.components }}
+      count: ${{ steps.list-components.outputs.count }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+        with:
+          # Fetch enough history so `git merge-base refs/remotes/origin/dev HEAD` works.
+          fetch-depth: 500
+      - name: Get target branch
+        id: target-branch
+        run: |
+          echo "branch=${{ github.event.pull_request.base.ref }}" >> $GITHUB_OUTPUT
+      - name: Fetch ${{ steps.target-branch.outputs.branch }} branch
+        run: |
+          git -c protocol.version=2 fetch --no-tags --prune --no-recurse-submodules --depth=1 origin +refs/heads/${{ steps.target-branch.outputs.branch }}:refs/remotes/origin/${{ steps.target-branch.outputs.branch }}
+          git merge-base refs/remotes/origin/${{ steps.target-branch.outputs.branch }} HEAD
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Find changed components
+        id: list-components
+        run: |
+          . venv/bin/activate
+          components=$(script/list-components.py --changed --branch ${{ steps.target-branch.outputs.branch }})
+          output_components=$(echo "$components" | jq -R -s -c 'split("\n")[:-1] | map(select(length > 0))')
+          count=$(echo "$output_components" | jq length)
+
+          echo "components=$output_components" >> $GITHUB_OUTPUT
+          echo "count=$count" >> $GITHUB_OUTPUT
+
+          echo "$count Components:"
+          echo "$output_components" | jq
+
+  test-build-components:
+    name: Component test ${{ matrix.file }}
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - list-components
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) > 0 && fromJSON(needs.list-components.outputs.count) < 100
+    strategy:
+      fail-fast: false
+      max-parallel: 2
+      matrix:
+        file: ${{ fromJson(needs.list-components.outputs.components) }}
+    steps:
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
+
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: test_build_components -e config -c ${{ matrix.file }}
+        run: |
+          . venv/bin/activate
+          ./script/test_build_components -e config -c ${{ matrix.file }}
+      - name: test_build_components -e compile -c ${{ matrix.file }}
+        run: |
+          . venv/bin/activate
+          ./script/test_build_components -e compile -c ${{ matrix.file }}
+
+  test-build-components-splitter:
+    name: Split components for testing into 20 groups maximum
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - list-components
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) >= 100
+    outputs:
+      matrix: ${{ steps.split.outputs.components }}
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Split components into 20 groups
+        id: split
+        run: |
+          components=$(echo '${{ needs.list-components.outputs.components }}' | jq -c '.[]' | shuf | jq -s -c '[_nwise(20) | join(" ")]')
+          echo "components=$components" >> $GITHUB_OUTPUT
+
+  test-build-components-split:
+    name: Test split components
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - list-components
+      - test-build-components-splitter
+    if: github.event_name == 'pull_request' && fromJSON(needs.list-components.outputs.count) >= 100
+    strategy:
+      fail-fast: false
+      max-parallel: 4
+      matrix:
+        components: ${{ fromJson(needs.test-build-components-splitter.outputs.matrix) }}
+    steps:
+      - name: List components
+        run: echo ${{ matrix.components }}
+
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install libsdl2-dev
+
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Validate config
+        run: |
+          . venv/bin/activate
+          for component in ${{ matrix.components }}; do
+            ./script/test_build_components -e config -c $component
+          done
+      - name: Compile config
+        run: |
+          . venv/bin/activate
+          mkdir build_cache
+          export PLATFORMIO_BUILD_CACHE_DIR=$PWD/build_cache
+          for component in ${{ matrix.components }}; do
+            ./script/test_build_components -e compile -c $component
+          done
+
   ci-status:
     name: CI Status
     runs-on: ubuntu-latest
@@ -337,9 +493,11 @@ jobs:
       - pylint
       - pytest
       - pyupgrade
-      - yamllint
-      - compile-tests
       - clang-tidy
+      - list-components
+      - test-build-components
+      - test-build-components-splitter
+      - test-build-components-split
     if: always()
     steps:
       - name: Success
@@ -347,4 +505,8 @@ jobs:
         run: exit 0
       - name: Failure
         if: ${{ contains(needs.*.result, 'failure') }}
-        run: exit 1
+        env:
+          JSON_DOC: ${{ toJSON(needs) }}
+        run: |
+          echo $JSON_DOC | jq
+          exit 1

.github/workflows/codeql.yml

@@ -0,0 +1,91 @@
+# For most projects, this workflow file will not need changing; you simply need
+# to commit it to your repository.
+#
+# You may wish to alter this file to override the set of languages analyzed,
+# or to provide custom queries or build logic.
+#
+# ******** NOTE ********
+# We have attempted to detect the languages in your repository. Please check
+# the `language` matrix defined below to confirm you have the correct set of
+# supported CodeQL languages.
+#
+name: "CodeQL Advanced"
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: "30 18 * * 4"
+
+jobs:
+  analyze:
+    name: Analyze (${{ matrix.language }})
+    # Runner size impacts CodeQL analysis time. To learn more, please see:
+    #   - https://gh.io/recommended-hardware-resources-for-running-codeql
+    #   - https://gh.io/supported-runners-and-hardware-resources
+    #   - https://gh.io/using-larger-runners (GitHub.com only)
+    # Consider using larger runners or machines with greater resources for possible analysis time improvements.
+    runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
+    permissions:
+      # required for all workflows
+      security-events: write
+
+      # required to fetch internal or private CodeQL packs
+      packages: read
+
+      # only required for workflows in private repositories
+      actions: read
+      contents: read
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # - language: c-cpp
+          #   build-mode: autobuild
+          - language: python
+            build-mode: none
+            # CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
+            # Use `c-cpp` to analyze code written in C, C++ or both
+            # Use 'java-kotlin' to analyze code written in Java, Kotlin or both
+            # Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
+            # To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
+            # see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
+            # If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
+            # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      # Initializes the CodeQL tools for scanning.
+      - name: Initialize CodeQL
+        uses: github/codeql-action/init@v3
+        with:
+          languages: ${{ matrix.language }}
+          build-mode: ${{ matrix.build-mode }}
+          # If you wish to specify custom queries, you can do so here or in a config file.
+          # By default, queries listed here will override any specified in a config file.
+          # Prefix the list here with "+" to use these queries and those in the config file.
+
+          # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+          # queries: security-extended,security-and-quality
+
+      # If the analyze step fails for one of the languages you are analyzing with
+      # "We were unable to automatically build your code", modify the matrix above
+      # to set the build mode to "manual" for that language. Then modify this step
+      # to build your code.
+      # ℹ️ Command-line programs to run using the OS shell.
+      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+      - if: matrix.build-mode == 'manual'
+        shell: bash
+        run: |
+          echo 'If you are using a "manual" build mode for one or more of the' \
+            'languages you are analyzing, replace this with the commands to build' \
+            'your code, for example:'
+          echo '  make bootstrap'
+          echo '  make release'
+          exit 1
+
+      - name: Perform CodeQL Analysis
+        uses: github/codeql-action/analyze@v3
+        with:
+          category: "/language:${{matrix.language}}"

.github/workflows/lock.yml

@@ -1,7 +1,6 @@
 ---
 name: Lock
 
-# yamllint disable-line rule:truthy
 on:
   schedule:
     - cron: "30 0 * * *"
@@ -18,7 +17,7 @@ jobs:
   lock:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@v4
+      - uses: dessant/lock-threads@v5.0.1
         with:
           pr-inactive-days: "1"
           pr-lock-reason: ""

.github/workflows/needs-docs.yml

@@ -0,0 +1,24 @@
+name: Needs Docs
+
+on:
+  pull_request:
+    types: [labeled, unlabeled]
+
+jobs:
+  check:
+    name: Check
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check for needs-docs label
+        uses: actions/github-script@v7.0.1
+        with:
+          script: |
+            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number
+            });
+            const needsDocs = labels.find(label => label.name === 'needs-docs');
+            if (needsDocs) {
+              core.setFailed('Pull request needs docs');
+            }

.github/workflows/release.yml

@@ -1,7 +1,6 @@
 ---
 name: Publish Release
 
-# yamllint disable-line rule:truthy
 on:
   workflow_dispatch:
   release:
@@ -18,14 +17,16 @@ jobs:
     runs-on: ubuntu-latest
     outputs:
       tag: ${{ steps.tag.outputs.tag }}
+      branch_build: ${{ steps.tag.outputs.branch_build }}
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4.1.7
       - name: Get tag
         id: tag
         # yamllint disable rule:line-length
         run: |
-          if [[ "$GITHUB_EVENT_NAME" = "release" ]]; then
-            TAG="${GITHUB_REF#refs/tags/}"
+          if [[ "${{ github.event_name }}" = "release" ]]; then
+            TAG="${{ github.event.release.tag_name}}"
+            BRANCH_BUILD="false"
           else
             TAG=$(cat esphome/const.py | sed -n -E "s/^__version__\s+=\s+\"(.+)\"$/\1/p")
             today="$(date --utc '+%Y%m%d')"
@@ -33,79 +34,167 @@ jobs:
             BRANCH=${GITHUB_REF#refs/heads/}
             if [[ "$BRANCH" != "dev" ]]; then
               TAG="${TAG}-${BRANCH}"
+              BRANCH_BUILD="true"
+            else
+              BRANCH_BUILD="false"
             fi
           fi
           echo "tag=${TAG}" >> $GITHUB_OUTPUT
+          echo "branch_build=${BRANCH_BUILD}" >> $GITHUB_OUTPUT
         # yamllint enable rule:line-length
 
   deploy-pypi:
     name: Build and publish to PyPi
     if: github.repository == 'esphome/esphome' && github.event_name == 'release'
     runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      id-token: write
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4.1.7
       - name: Set up Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5.3.0
         with:
           python-version: "3.x"
       - name: Set up python environment
         env:
           ESPHOME_NO_VENV: 1
-        run: |
-          script/setup
-          pip install twine
+        run: script/setup
       - name: Build
-        run: python setup.py sdist bdist_wheel
-      - name: Upload
-        env:
-          TWINE_USERNAME: __token__
-          TWINE_PASSWORD: ${{ secrets.PYPI_TOKEN }}
-        run: twine upload dist/*
+        run: |-
+          pip3 install build
+          python3 -m build
+      - name: Publish
+        uses: pypa/gh-action-pypi-publish@v1.12.2
 
   deploy-docker:
-    name: Build and publish ESPHome ${{ matrix.image.title}}
+    name: Build ESPHome ${{ matrix.platform }}
     if: github.repository == 'esphome/esphome'
     permissions:
       contents: read
       packages: write
     runs-on: ubuntu-latest
-    continue-on-error: ${{ matrix.image.title == 'lint' }}
     needs: [init]
+    strategy:
+      fail-fast: false
+      matrix:
+        platform:
+          - linux/amd64
+          - linux/arm/v7
+          - linux/arm64
+    steps:
+      - uses: actions/checkout@v4.1.7
+      - name: Set up Python
+        uses: actions/setup-python@v5.3.0
+        with:
+          python-version: "3.9"
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3.7.1
+      - name: Set up QEMU
+        if: matrix.platform != 'linux/amd64'
+        uses: docker/setup-qemu-action@v3.2.0
+
+      - name: Log in to docker hub
+        uses: docker/login-action@v3.3.0
+        with:
+          username: ${{ secrets.DOCKER_USER }}
+          password: ${{ secrets.DOCKER_PASSWORD }}
+      - name: Log in to the GitHub container registry
+        uses: docker/login-action@v3.3.0
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build docker
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: docker
+          baseimg: docker
+          suffix: ""
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Build ha-addon
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: hassio
+          baseimg: hassio
+          suffix: "hassio"
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Build lint
+        uses: ./.github/actions/build-image
+        with:
+          platform: ${{ matrix.platform }}
+          target: lint
+          baseimg: docker
+          suffix: lint
+          version: ${{ needs.init.outputs.tag }}
+
+      - name: Sanitize platform name
+        id: sanitize
+        run: |
+          echo "${{ matrix.platform }}" | sed 's|/|-|g' > /tmp/platform
+          echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
+
+      - name: Upload digests
+        uses: actions/upload-artifact@v4.4.3
+        with:
+          name: digests-${{ steps.sanitize.outputs.name }}
+          path: /tmp/digests
+          retention-days: 1
+
+  deploy-manifest:
+    name: Publish ESPHome ${{ matrix.image.title }} to ${{ matrix.registry }}
+    runs-on: ubuntu-latest
+    needs:
+      - init
+      - deploy-docker
+    if: github.repository == 'esphome/esphome'
+    permissions:
+      contents: read
+      packages: write
     strategy:
       fail-fast: false
       matrix:
         image:
           - title: "ha-addon"
-            suffix: "hassio"
             target: "hassio"
-            baseimg: "hassio"
+            suffix: "hassio"
           - title: "docker"
-            suffix: ""
             target: "docker"
-            baseimg: "docker"
+            suffix: ""
           - title: "lint"
-            suffix: "lint"
             target: "lint"
-            baseimg: "docker"
+            suffix: "lint"
+        registry:
+          - ghcr
+          - dockerhub
     steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
+      - uses: actions/checkout@v4.1.7
+
+      - name: Download digests
+        uses: actions/download-artifact@v4.1.8
         with:
-          python-version: "3.9"
+          pattern: digests-*
+          path: /tmp/digests
+          merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v2
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v2
+        uses: docker/setup-buildx-action@v3.7.1
 
       - name: Log in to docker hub
-        uses: docker/login-action@v2
+        if: matrix.registry == 'dockerhub'
+        uses: docker/login-action@v3.3.0
         with:
           username: ${{ secrets.DOCKER_USER }}
           password: ${{ secrets.DOCKER_PASSWORD }}
       - name: Log in to the GitHub container registry
-        uses: docker/login-action@v2
+        if: matrix.registry == 'ghcr'
+        uses: docker/login-action@v3.3.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -114,44 +203,44 @@ jobs:
       - name: Generate short tags
         id: tags
         run: |
-          docker/generate_tags.py \
+          output=$(docker/generate_tags.py \
             --tag "${{ needs.init.outputs.tag }}" \
-            --suffix "${{ matrix.image.suffix }}"
+            --suffix "${{ matrix.image.suffix }}" \
+            --registry "${{ matrix.registry }}")
+          echo $output
+          for l in $output; do
+            echo $l >> $GITHUB_OUTPUT
+          done
 
-      - name: Build and push
-        uses: docker/build-push-action@v4
-        with:
-          context: .
-          file: ./docker/Dockerfile
-          platforms: linux/amd64,linux/arm/v7,linux/arm64
-          target: ${{ matrix.image.target }}
-          push: true
-          # yamllint disable rule:line-length
-          cache-from: type=registry,ref=ghcr.io/${{ steps.tags.outputs.image }}:cache-${{ steps.tags.outputs.channel }}
-          cache-to: type=registry,ref=ghcr.io/${{ steps.tags.outputs.image }}:cache-${{ steps.tags.outputs.channel }},mode=max
-          # yamllint enable rule:line-length
-          tags: ${{ steps.tags.outputs.tags }}
-          build-args: |
-            BASEIMGTYPE=${{ matrix.image.baseimg }}
-            BUILD_VERSION=${{ needs.init.outputs.tag }}
+      - name: Create manifest list and push
+        working-directory: /tmp/digests/${{ matrix.image.target }}/${{ matrix.registry }}
+        run: |
+          docker buildx imagetools create $(jq -Rcnr 'inputs | . / "," | map("-t " + .) | join(" ")' <<< "${{ steps.tags.outputs.tags}}") \
+            $(printf '${{ steps.tags.outputs.image }}@sha256:%s ' *)
 
   deploy-ha-addon-repo:
-    if: github.repository == 'esphome/esphome' && github.event_name == 'release'
+    if: github.repository == 'esphome/esphome' && needs.init.outputs.branch_build == 'false'
     runs-on: ubuntu-latest
-    needs: [deploy-docker]
+    needs:
+      - init
+      - deploy-manifest
     steps:
       - name: Trigger Workflow
-        uses: actions/github-script@v6
+        uses: actions/github-script@v7.0.1
         with:
           github-token: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
           script: |
+            let description = "ESPHome";
+            if (context.eventName == "release") {
+              description = ${{ toJSON(github.event.release.body) }};
+            }
             github.rest.actions.createWorkflowDispatch({
               owner: "esphome",
               repo: "home-assistant-addon",
               workflow_id: "bump-version.yml",
               ref: "main",
               inputs: {
-                version: "${{ github.event.release.tag_name }}",
-                content: ${{ toJSON(github.event.release.body) }}
+                version: "${{ needs.init.outputs.tag }}",
+                content: description
               }
             })

.github/workflows/stale.yml

@@ -1,7 +1,6 @@
 ---
 name: Stale
 
-# yamllint disable-line rule:truthy
 on:
   schedule:
     - cron: "30 0 * * *"
@@ -18,7 +17,7 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v8
+      - uses: actions/stale@v9.0.0
         with:
           days-before-pr-stale: 90
           days-before-pr-close: 7
@@ -38,7 +37,7 @@ jobs:
   close-issues:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v8
+      - uses: actions/stale@v9.0.0
         with:
           days-before-pr-stale: -1
           days-before-pr-close: -1

.github/workflows/sync-device-classes.yml

@@ -4,8 +4,7 @@ name: Synchronise Device Classes from Home Assistant
 on:
   workflow_dispatch:
   schedule:
-    - cron: '45 6 * * *'
-
+    - cron: "45 6 * * *"
 
 jobs:
   sync:
@@ -14,18 +13,18 @@ jobs:
     if: github.repository == 'esphome/esphome'
     steps:
       - name: Checkout
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4.1.7
 
       - name: Checkout Home Assistant
-        uses: actions/checkout@v3
+        uses: actions/checkout@v4.1.7
         with:
           repository: home-assistant/core
           path: lib/home-assistant
 
       - name: Setup Python
-        uses: actions/setup-python@v4
+        uses: actions/setup-python@v5.3.0
         with:
-          python-version: 3.11
+          python-version: 3.12
 
       - name: Install Home Assistant
         run: |
@@ -37,7 +36,7 @@ jobs:
           python ./script/sync-device_class.py
 
       - name: Commit changes
-        uses: peter-evans/create-pull-request@v5
+        uses: peter-evans/create-pull-request@v7.0.5
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>

.github/workflows/yaml-lint.yml

@@ -0,0 +1,25 @@
+---
+name: YAML lint
+
+on:
+  push:
+    branches: [dev, beta, release]
+    paths:
+      - "**.yaml"
+      - "**.yml"
+  pull_request:
+    paths:
+      - "**.yaml"
+      - "**.yml"
+
+jobs:
+  yamllint:
+    name: yamllint
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v4.1.7
+      - name: Run yamllint
+        uses: frenck/action-yamllint@v1.5.0
+        with:
+          strict: true

.gitignore

@@ -13,6 +13,12 @@ __pycache__/
 # Intellij Idea
 .idea
 
+# Eclipse
+.project
+.cproject
+.pydevproject
+.settings/
+
 # Vim
 *.swp
 
@@ -69,6 +75,9 @@ cov.xml
 # pyenv
 .python-version
 
+# asdf
+.tool-versions
+
 # Environments
 .env
 .venv
@@ -132,3 +141,5 @@ sdkconfig.*
 .tests/
 
 /components
+/managed_components
+

.pre-commit-config.yaml

@@ -2,8 +2,17 @@
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
 repos:
-  - repo: https://github.com/psf/black
-    rev: 23.7.0
+  - repo: https://github.com/astral-sh/ruff-pre-commit
+    # Ruff version.
+    rev: v0.5.4
+    hooks:
+      # Run the linter.
+      - id: ruff
+        args: [--fix]
+      # Run the formatter.
+      - id: ruff-format
+  - repo: https://github.com/psf/black-pre-commit-mirror
+    rev: 24.4.2
     hooks:
       - id: black
         args:
@@ -11,7 +20,7 @@ repos:
           - --quiet
         files: ^((esphome|script|tests)/.+)?[^/]+\.py$
   - repo: https://github.com/PyCQA/flake8
-    rev: 6.0.0
+    rev: 6.1.0
     hooks:
       - id: flake8
         additional_dependencies:
@@ -27,7 +36,23 @@ repos:
           - --branch=release
           - --branch=beta
   - repo: https://github.com/asottile/pyupgrade
-    rev: v3.10.1
+    rev: v3.15.2
     hooks:
       - id: pyupgrade
         args: [--py39-plus]
+  - repo: https://github.com/adrienverge/yamllint.git
+    rev: v1.35.1
+    hooks:
+      - id: yamllint
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: v13.0.1
+    hooks:
+      - id: clang-format
+        types_or: [c, c++]
+  - repo: local
+    hooks:
+      - id: pylint
+        name: pylint
+        entry: script/run-in-env.sh pylint
+        language: script
+        types: [python]

.yamllint

@@ -1,3 +1,19 @@
 ---
-ignore: |
-  venv/
+extends: default
+
+ignore-from-file: .gitignore
+
+rules:
+  document-start: disable
+  empty-lines:
+    level: error
+    max: 1
+    max-start: 0
+    max-end: 1
+  indentation:
+    level: error
+    spaces: 2
+    indent-sequences: true
+    check-multi-line-strings: false
+  line-length: disable
+  truthy: disable

CODEOWNERS

@@ -6,75 +6,116 @@
 # the integration's code owner is automatically notified.
 
 # Core Code
-setup.py @esphome/core
+pyproject.toml @esphome/core
 esphome/*.py @esphome/core
 esphome/core/* @esphome/core
 
 # Integrations
 esphome/components/a01nyub/* @MrSuicideParrot
+esphome/components/a02yyuw/* @TH-Braemer
 esphome/components/absolute_humidity/* @DAVe3283
 esphome/components/ac_dimmer/* @glmnet
 esphome/components/adc/* @esphome/core
 esphome/components/adc128s102/* @DeerMaximum
 esphome/components/addressable_light/* @justfalter
+esphome/components/ade7880/* @kpfleming
+esphome/components/ade7953/* @angelnu
+esphome/components/ade7953_i2c/* @angelnu
+esphome/components/ade7953_spi/* @angelnu
+esphome/components/ads1118/* @solomondg1
+esphome/components/ags10/* @mak-42
+esphome/components/aic3204/* @kbx81
 esphome/components/airthings_ble/* @jeromelaban
 esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
 esphome/components/airthings_wave_plus/* @jeromelaban
-esphome/components/alarm_control_panel/* @grahambrown11
+esphome/components/alarm_control_panel/* @grahambrown11 @hwstar
 esphome/components/alpha3/* @jan-hofmeier
+esphome/components/am2315c/* @swoboda1337
 esphome/components/am43/* @buxtronix
 esphome/components/am43/cover/* @buxtronix
 esphome/components/am43/sensor/* @buxtronix
 esphome/components/analog_threshold/* @ianchi
 esphome/components/animation/* @syndlex
 esphome/components/anova/* @buxtronix
+esphome/components/apds9306/* @aodrenah
 esphome/components/api/* @OttoWinter
+esphome/components/as5600/* @ammmze
+esphome/components/as5600/sensor/* @ammmze
 esphome/components/as7341/* @mrgnr
 esphome/components/async_tcp/* @OttoWinter
+esphome/components/at581x/* @X-Ryl669
 esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/atm90e26/* @danieltwagner
+esphome/components/atm90e32/* @circuitsetup @descipher
+esphome/components/audio/* @kahrendt
+esphome/components/audio_dac/* @kbx81
+esphome/components/axs15231/* @clydebarrow
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
 esphome/components/bedjet/* @jhansche
 esphome/components/bedjet/climate/* @jhansche
 esphome/components/bedjet/fan/* @jhansche
+esphome/components/bedjet/sensor/* @javawizard @jhansche
+esphome/components/beken_spi_led_strip/* @Mat931
 esphome/components/bh1750/* @OttoWinter
 esphome/components/binary_sensor/* @esphome/core
+esphome/components/bk72xx/* @kuba2k2
+esphome/components/bl0906/* @athom-tech @jesserockz @tarontop
 esphome/components/bl0939/* @ziceva
 esphome/components/bl0940/* @tobias-
-esphome/components/bl0942/* @dbuezas
-esphome/components/ble_client/* @buxtronix
+esphome/components/bl0942/* @dbuezas @dwmw2
+esphome/components/ble_client/* @buxtronix @clydebarrow
 esphome/components/bluetooth_proxy/* @jesserockz
+esphome/components/bme280_base/* @esphome/core
+esphome/components/bme280_spi/* @apbodrov
 esphome/components/bme680_bsec/* @trvrnrth
-esphome/components/bmp3xx/* @martgras
+esphome/components/bme68x_bsec2/* @kbx81 @neffs
+esphome/components/bme68x_bsec2_i2c/* @kbx81 @neffs
+esphome/components/bmi160/* @flaviut
+esphome/components/bmp280_base/* @ademuri
+esphome/components/bmp280_i2c/* @ademuri
+esphome/components/bmp280_spi/* @ademuri
+esphome/components/bmp3xx/* @latonita
+esphome/components/bmp3xx_base/* @latonita @martgras
+esphome/components/bmp3xx_i2c/* @latonita
+esphome/components/bmp3xx_spi/* @latonita
 esphome/components/bmp581/* @kahrendt
 esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
 esphome/components/button/* @esphome/core
+esphome/components/bytebuffer/* @clydebarrow
 esphome/components/canbus/* @danielschramm @mvturnho
-esphome/components/cap1188/* @MrEditor97
+esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @OttoWinter
 esphome/components/ccs811/* @habbie
 esphome/components/cd74hc4067/* @asoehlke
+esphome/components/ch422g/* @clydebarrow @jesterret
 esphome/components/climate/* @esphome/core
 esphome/components/climate_ir/* @glmnet
 esphome/components/color_temperature/* @jesserockz
+esphome/components/combination/* @Cat-Ion @kahrendt
 esphome/components/coolix/* @glmnet
 esphome/components/copy/* @OttoWinter
 esphome/components/cover/* @esphome/core
 esphome/components/cs5460a/* @balrog-kun
 esphome/components/cse7761/* @berfenger
+esphome/components/cst226/* @clydebarrow
+esphome/components/cst816/* @clydebarrow
 esphome/components/ct_clamp/* @jesserockz
 esphome/components/current_based/* @djwmarcx
 esphome/components/dac7678/* @NickB1
+esphome/components/daikin_arc/* @MagicBear
 esphome/components/daikin_brc/* @hagak
+esphome/components/dallas_temp/* @ssieb
 esphome/components/daly_bms/* @s1lvi0
 esphome/components/dashboard_import/* @esphome/core
+esphome/components/datetime/* @jesserockz @rfdarter
 esphome/components/debug/* @OttoWinter
 esphome/components/delonghi/* @grob6000
 esphome/components/dfplayer/* @glmnet
+esphome/components/dfrobot_sen0395/* @niklasweber
 esphome/components/dht/* @OttoWinter
 esphome/components/display_menu_base/* @numo68
 esphome/components/dps310/* @kbx81
@@ -82,76 +123,126 @@ esphome/components/ds1307/* @badbadc0ffee
 esphome/components/dsmr/* @glmnet @zuidwijk
 esphome/components/duty_time/* @dudanov
 esphome/components/ee895/* @Stock-M
-esphome/components/ektf2232/* @jesserockz
+esphome/components/ektf2232/touchscreen/* @jesserockz
+esphome/components/emc2101/* @ellull
+esphome/components/emmeti/* @E440QF
+esphome/components/ens160/* @latonita
+esphome/components/ens160_base/* @latonita @vincentscode
+esphome/components/ens160_i2c/* @latonita
+esphome/components/ens160_spi/* @latonita
 esphome/components/ens210/* @itn3rd77
+esphome/components/es8311/* @kahrendt @kroimon
 esphome/components/esp32/* @esphome/core
-esphome/components/esp32_ble/* @jesserockz
+esphome/components/esp32_ble/* @Rapsssito @jesserockz
 esphome/components/esp32_ble_client/* @jesserockz
-esphome/components/esp32_ble_server/* @jesserockz
+esphome/components/esp32_ble_server/* @Rapsssito @clydebarrow @jesserockz
 esphome/components/esp32_camera_web_server/* @ayufan
 esphome/components/esp32_can/* @Sympatron
 esphome/components/esp32_improv/* @jesserockz
+esphome/components/esp32_rmt/* @jesserockz
 esphome/components/esp32_rmt_led_strip/* @jesserockz
 esphome/components/esp8266/* @esphome/core
 esphome/components/ethernet_info/* @gtjadsonsantos
+esphome/components/event/* @nohat
 esphome/components/exposure_notifications/* @OttoWinter
 esphome/components/ezo/* @ssieb
 esphome/components/ezo_pmp/* @carlos-sarmiento
 esphome/components/factory_reset/* @anatoly-savchenkov
 esphome/components/fastled_base/* @OttoWinter
 esphome/components/feedback/* @ianchi
-esphome/components/fingerprint_grow/* @OnFreund @loongyh
+esphome/components/fingerprint_grow/* @OnFreund @alexborro @loongyh
+esphome/components/font/* @clydebarrow @esphome/core
 esphome/components/fs3000/* @kahrendt
+esphome/components/ft5x06/* @clydebarrow
+esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
+esphome/components/gdk101/* @Szewcson
 esphome/components/globals/* @esphome/core
+esphome/components/gp2y1010au0f/* @zry98
 esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
+esphome/components/gpio/one_wire/* @ssieb
 esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
+esphome/components/graphical_display_menu/* @MrMDavidson
+esphome/components/gree/* @orestismers
+esphome/components/grove_gas_mc_v2/* @YorkshireIoT
 esphome/components/grove_tb6612fng/* @max246
 esphome/components/growatt_solar/* @leeuwte
+esphome/components/gt911/* @clydebarrow @jesserockz
 esphome/components/haier/* @paveldn
+esphome/components/haier/binary_sensor/* @paveldn
+esphome/components/haier/button/* @paveldn
+esphome/components/haier/sensor/* @paveldn
+esphome/components/haier/switch/* @paveldn
+esphome/components/haier/text_sensor/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
 esphome/components/hbridge/light/* @DotNetDann
+esphome/components/he60r/* @clydebarrow
 esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
 esphome/components/hm3301/* @freekode
-esphome/components/homeassistant/* @OttoWinter
+esphome/components/hmac_md5/* @dwmw2
+esphome/components/homeassistant/* @OttoWinter @esphome/core
+esphome/components/homeassistant/number/* @landonr
+esphome/components/homeassistant/switch/* @Links2004
+esphome/components/honeywell_hih_i2c/* @Benichou34
 esphome/components/honeywellabp/* @RubyBailey
-esphome/components/host/* @esphome/core
+esphome/components/honeywellabp2_i2c/* @jpfaff
+esphome/components/host/* @clydebarrow @esphome/core
+esphome/components/host/time/* @clydebarrow
 esphome/components/hrxl_maxsonar_wr/* @netmikey
 esphome/components/hte501/* @Stock-M
+esphome/components/http_request/ota/* @oarcher
+esphome/components/http_request/update/* @jesserockz
+esphome/components/htu31d/* @betterengineering
 esphome/components/hydreon_rgxx/* @functionpointer
 esphome/components/hyt271/* @Philippe12
 esphome/components/i2c/* @esphome/core
+esphome/components/i2c_device/* @gabest11
 esphome/components/i2s_audio/* @jesserockz
 esphome/components/i2s_audio/media_player/* @jesserockz
 esphome/components/i2s_audio/microphone/* @jesserockz
-esphome/components/i2s_audio/speaker/* @jesserockz
-esphome/components/ili9xxx/* @nielsnl68
+esphome/components/i2s_audio/speaker/* @jesserockz @kahrendt
+esphome/components/iaqcore/* @yozik04
+esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
 esphome/components/improv_serial/* @esphome/core
-esphome/components/ina260/* @MrEditor97
+esphome/components/ina226/* @Sergio303 @latonita
+esphome/components/ina260/* @mreditor97
+esphome/components/ina2xx_base/* @latonita
+esphome/components/ina2xx_i2c/* @latonita
+esphome/components/ina2xx_spi/* @latonita
 esphome/components/inkbird_ibsth1_mini/* @fkirill
 esphome/components/inkplate6/* @jesserockz
 esphome/components/integration/* @OttoWinter
 esphome/components/internal_temperature/* @Mat931
 esphome/components/interval/* @esphome/core
+esphome/components/jsn_sr04t/* @Mafus1
 esphome/components/json/* @OttoWinter
-esphome/components/kalman_combinator/* @Cat-Ion
+esphome/components/kamstrup_kmp/* @cfeenstra1024
 esphome/components/key_collector/* @ssieb
 esphome/components/key_provider/* @ssieb
 esphome/components/kuntze/* @ssieb
 esphome/components/lcd_menu/* @numo68
-esphome/components/ld2410/* @sebcaps
+esphome/components/ld2410/* @regevbr @sebcaps
+esphome/components/ld2420/* @descipher
 esphome/components/ledc/* @OttoWinter
+esphome/components/libretiny/* @kuba2k2
+esphome/components/libretiny_pwm/* @kuba2k2
 esphome/components/light/* @esphome/core
+esphome/components/lightwaverf/* @max246
 esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
 esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
-esphome/components/ltr390/* @sjtrny
+esphome/components/ltr390/* @latonita @sjtrny
+esphome/components/ltr501/* @latonita
+esphome/components/ltr_als_ps/* @latonita
+esphome/components/lvgl/* @clydebarrow
+esphome/components/m5stack_8angle/* @rnauber
 esphome/components/matrix_keypad/* @ssieb
+esphome/components/max17043/* @blacknell
 esphome/components/max31865/* @DAVe3283
 esphome/components/max44009/* @berfenger
 esphome/components/max6956/* @looping40
@@ -168,11 +259,13 @@ esphome/components/mcp2515/* @danielschramm @mvturnho
 esphome/components/mcp3204/* @rsumner
 esphome/components/mcp4728/* @berfenger
 esphome/components/mcp47a1/* @jesserockz
-esphome/components/mcp9600/* @MrEditor97
+esphome/components/mcp9600/* @mreditor97
 esphome/components/mcp9808/* @k7hpn
 esphome/components/md5/* @esphome/core
 esphome/components/mdns/* @esphome/core
 esphome/components/media_player/* @jesserockz
+esphome/components/micro_wake_word/* @jesserockz @kahrendt
+esphome/components/micronova/* @jorre05
 esphome/components/microphone/* @jesserockz
 esphome/components/mics_4514/* @jesserockz
 esphome/components/midea/* @dudanov
@@ -181,6 +274,7 @@ esphome/components/mitsubishi/* @RubyBailey
 esphome/components/mlx90393/* @functionpointer
 esphome/components/mlx90614/* @jesserockz
 esphome/components/mmc5603/* @benhoff
+esphome/components/mmc5983/* @agoode
 esphome/components/modbus_controller/* @martgras
 esphome/components/modbus_controller/binary_sensor/* @martgras
 esphome/components/modbus_controller/number/* @martgras
@@ -194,60 +288,84 @@ esphome/components/mopeka_pro_check/* @spbrogan
 esphome/components/mopeka_std_check/* @Fabian-Schmidt
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
+esphome/components/ms8607/* @e28eta
+esphome/components/nau7802/* @cujomalainey
 esphome/components/network/* @esphome/core
-esphome/components/nextion/* @senexcrenshaw
+esphome/components/nextion/* @edwardtfn @senexcrenshaw
 esphome/components/nextion/binary_sensor/* @senexcrenshaw
 esphome/components/nextion/sensor/* @senexcrenshaw
 esphome/components/nextion/switch/* @senexcrenshaw
 esphome/components/nextion/text_sensor/* @senexcrenshaw
-esphome/components/nfc/* @jesserockz
+esphome/components/nfc/* @jesserockz @kbx81
+esphome/components/noblex/* @AGalfra
+esphome/components/npi19/* @bakerkj
 esphome/components/number/* @esphome/core
+esphome/components/one_wire/* @ssieb
+esphome/components/online_image/* @guillempages
+esphome/components/opentherm/* @olegtarasov
 esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/pca6416a/* @Mat931
-esphome/components/pca9554/* @hwstar
+esphome/components/pca9554/* @clydebarrow @hwstar
 esphome/components/pcf85063/* @brogon
 esphome/components/pcf8563/* @KoenBreeman
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
 esphome/components/pm1006/* @habbie
 esphome/components/pmsa003i/* @sjtrny
+esphome/components/pmwcs3/* @SeByDocKy
 esphome/components/pn532/* @OttoWinter @jesserockz
 esphome/components/pn532_i2c/* @OttoWinter @jesserockz
 esphome/components/pn532_spi/* @OttoWinter @jesserockz
+esphome/components/pn7150/* @jesserockz @kbx81
+esphome/components/pn7150_i2c/* @jesserockz @kbx81
+esphome/components/pn7160/* @jesserockz @kbx81
+esphome/components/pn7160_i2c/* @jesserockz @kbx81
+esphome/components/pn7160_spi/* @jesserockz @kbx81
 esphome/components/power_supply/* @esphome/core
 esphome/components/preferences/* @esphome/core
 esphome/components/psram/* @esphome/core
-esphome/components/pulse_meter/* @cstaahl @stevebaxter
+esphome/components/pulse_meter/* @TrentHouliston @cstaahl @stevebaxter
 esphome/components/pvvx_mithermometer/* @pasiz
+esphome/components/pylontech/* @functionpointer
 esphome/components/qmp6988/* @andrewpc
 esphome/components/qr_code/* @wjtje
+esphome/components/qspi_dbi/* @clydebarrow
+esphome/components/qwiic_pir/* @kahrendt
 esphome/components/radon_eye_ble/* @jeffeb3
 esphome/components/radon_eye_rd200/* @jeffeb3
 esphome/components/rc522/* @glmnet
 esphome/components/rc522_i2c/* @glmnet
 esphome/components/rc522_spi/* @glmnet
+esphome/components/resistance_sampler/* @jesserockz
 esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/rp2040/* @jesserockz
 esphome/components/rp2040_pio_led_strip/* @Papa-DMan
 esphome/components/rp2040_pwm/* @jesserockz
+esphome/components/rpi_dpi_rgb/* @clydebarrow
+esphome/components/rtl87xx/* @kuba2k2
 esphome/components/rtttl/* @glmnet
-esphome/components/safe_mode/* @jsuanet @paulmonigatti
+esphome/components/safe_mode/* @jsuanet @kbx81 @paulmonigatti
 esphome/components/scd4x/* @martgras @sjtrny
 esphome/components/script/* @esphome/core
+esphome/components/sdl/* @clydebarrow
 esphome/components/sdm_meter/* @jesserockz @polyfaces
 esphome/components/sdp3x/* @Azimath
+esphome/components/seeed_mr24hpc1/* @limengdu
 esphome/components/selec_meter/* @sourabhjaiswal
 esphome/components/select/* @esphome/core
+esphome/components/sen0321/* @notjj
 esphome/components/sen21231/* @shreyaskarnik
 esphome/components/sen5x/* @martgras
 esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
+esphome/components/sfa30/* @ghsensdev
 esphome/components/sgp40/* @SenexCrenshaw
 esphome/components/sgp4x/* @SenexCrenshaw @martgras
 esphome/components/shelly_dimmer/* @edge90 @rnauber
+esphome/components/sht3xd/* @mrtoy-me
 esphome/components/sht4x/* @sjtrny
 esphome/components/shutdown/* @esphome/core @jsuanet
 esphome/components/sigma_delta_output/* @Cat-Ion
@@ -261,8 +379,10 @@ esphome/components/smt100/* @piechade
 esphome/components/sn74hc165/* @jesserockz
 esphome/components/socket/* @esphome/core
 esphome/components/sonoff_d1/* @anatoly-savchenkov
-esphome/components/speaker/* @jesserockz
-esphome/components/spi/* @esphome/core
+esphome/components/speaker/* @jesserockz @kahrendt
+esphome/components/spi/* @clydebarrow @esphome/core
+esphome/components/spi_device/* @clydebarrow
+esphome/components/spi_led_strip/* @clydebarrow
 esphome/components/sprinkler/* @kbx81
 esphome/components/sps30/* @martgras
 esphome/components/ssd1322_base/* @kbx81
@@ -276,21 +396,35 @@ esphome/components/ssd1331_base/* @kbx81
 esphome/components/ssd1331_spi/* @kbx81
 esphome/components/ssd1351_base/* @kbx81
 esphome/components/ssd1351_spi/* @kbx81
+esphome/components/st7567_base/* @latonita
+esphome/components/st7567_i2c/* @latonita
+esphome/components/st7567_spi/* @latonita
+esphome/components/st7701s/* @clydebarrow
 esphome/components/st7735/* @SenexCrenshaw
 esphome/components/st7789v/* @kbx81
 esphome/components/st7920/* @marsjan155
+esphome/components/statsd/* @Links2004
 esphome/components/substitutions/* @esphome/core
 esphome/components/sun/* @OttoWinter
+esphome/components/sun_gtil2/* @Mat931
 esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
+esphome/components/tc74/* @sethgirvan
 esphome/components/tca9548a/* @andreashergert1984
+esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
-esphome/components/template/alarm_control_panel/* @grahambrown11
+esphome/components/tem3200/* @bakerkj
+esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
+esphome/components/template/datetime/* @rfdarter
+esphome/components/template/event/* @nohat
+esphome/components/template/fan/* @ssieb
+esphome/components/text/* @mauritskorse
 esphome/components/thermostat/* @kbx81
 esphome/components/time/* @OttoWinter
 esphome/components/tlc5947/* @rnauber
+esphome/components/tlc5971/* @IJIJI
 esphome/components/tm1621/* @Philippe12
 esphome/components/tm1637/* @glmnet
 esphome/components/tm1638/* @skykingjwc
@@ -300,7 +434,7 @@ esphome/components/tmp1075/* @sybrenstuvel
 esphome/components/tmp117/* @Azimath
 esphome/components/tof10120/* @wstrzalka
 esphome/components/toshiba/* @kbx81
-esphome/components/touchscreen/* @jesserockz
+esphome/components/touchscreen/* @jesserockz @nielsnl68
 esphome/components/tsl2591/* @wjcarpenter
 esphome/components/tt21100/* @kroimon
 esphome/components/tuya/binary_sensor/* @jesserockz
@@ -311,24 +445,49 @@ esphome/components/tuya/sensor/* @jesserockz
 esphome/components/tuya/switch/* @jesserockz
 esphome/components/tuya/text_sensor/* @dentra
 esphome/components/uart/* @esphome/core
+esphome/components/uart/button/* @ssieb
+esphome/components/udp/* @clydebarrow
 esphome/components/ufire_ec/* @pvizeli
 esphome/components/ufire_ise/* @pvizeli
 esphome/components/ultrasonic/* @OttoWinter
+esphome/components/update/* @jesserockz
+esphome/components/uponor_smatrix/* @kroimon
+esphome/components/valve/* @esphome/core
 esphome/components/vbus/* @ssieb
+esphome/components/veml3235/* @kbx81
+esphome/components/veml7700/* @latonita
 esphome/components/version/* @esphome/core
 esphome/components/voice_assistant/* @jesserockz
-esphome/components/wake_on_lan/* @willwill2will54
+esphome/components/wake_on_lan/* @clydebarrow @willwill2will54
+esphome/components/watchdog/* @oarcher
+esphome/components/waveshare_epaper/* @clydebarrow
 esphome/components/web_server_base/* @OttoWinter
 esphome/components/web_server_idf/* @dentra
+esphome/components/weikai/* @DrCoolZic
+esphome/components/weikai_i2c/* @DrCoolZic
+esphome/components/weikai_spi/* @DrCoolZic
 esphome/components/whirlpool/* @glmnet
 esphome/components/whynter/* @aeonsablaze
 esphome/components/wiegand/* @ssieb
+esphome/components/wireguard/* @droscy @lhoracek @thomas0bernard
+esphome/components/wk2132_i2c/* @DrCoolZic
+esphome/components/wk2132_spi/* @DrCoolZic
+esphome/components/wk2168_i2c/* @DrCoolZic
+esphome/components/wk2168_spi/* @DrCoolZic
+esphome/components/wk2204_i2c/* @DrCoolZic
+esphome/components/wk2204_spi/* @DrCoolZic
+esphome/components/wk2212_i2c/* @DrCoolZic
+esphome/components/wk2212_spi/* @DrCoolZic
 esphome/components/wl_134/* @hobbypunk90
 esphome/components/x9c/* @EtienneMD
+esphome/components/xgzp68xx/* @gcormier
+esphome/components/xiaomi_hhccjcy10/* @fariouche
+esphome/components/xiaomi_lywsd02mmc/* @juanluss31
 esphome/components/xiaomi_lywsd03mmc/* @ahpohl
 esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs
 esphome/components/xiaomi_rtcgq02lm/* @jesserockz
 esphome/components/xl9535/* @mreditor97
-esphome/components/xpt2046/* @nielsnl68 @numo68
+esphome/components/xpt2046/touchscreen/* @nielsnl68 @numo68
+esphome/components/zhlt01/* @cfeenstra1024
 esphome/components/zio_ultrasonic/* @kahrendt

CONTRIBUTING.md

@@ -10,5 +10,3 @@ Things to note when contributing:
    for more information.
  - Please also update the tests in the `tests/` folder. You can do so by just adding a line in one of the YAML files
    which checks if your new feature compiles correctly.
- - Sometimes I will let pull requests linger because I'm not 100% sure about them. Please feel free to ping
-   me after some time.

README.md

@@ -7,3 +7,5 @@
 For issues, please go to [the issue tracker](https://github.com/esphome/issues/issues).
 
 For feature requests, please see [feature requests](https://github.com/esphome/feature-requests/issues).
+
+[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

docker/Dockerfile

@@ -5,39 +5,42 @@
 # One of "docker", "hassio"
 ARG BASEIMGTYPE=docker
 
+
 # https://github.com/hassio-addons/addon-debian-base/releases
-FROM ghcr.io/hassio-addons/debian-base:6.2.3 AS base-hassio
-# https://hub.docker.com/_/debian?tab=tags&page=1&name=bullseye
-FROM debian:bullseye-20230208-slim AS base-docker
+FROM ghcr.io/hassio-addons/debian-base:7.2.0 AS base-hassio
+# https://hub.docker.com/_/debian?tab=tags&page=1&name=bookworm
+FROM debian:12.2-slim AS base-docker
 
 FROM base-${BASEIMGTYPE} AS base
 
+
 ARG TARGETARCH
 ARG TARGETVARIANT
 
+
+# Note that --break-system-packages is used below because
+# https://peps.python.org/pep-0668/ added a safety check that prevents
+# installing packages with the same name as a system package. This is
+# not a problem for us because we are not concerned about overwriting
+# system packages because we are running in an isolated container.
+
 RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
     && apt-get install -y --no-install-recommends \
-        python3=3.9.2-3 \
-        python3-pip=20.3.4-4+deb11u1 \
-        python3-setuptools=52.0.0-4 \
-        python3-cryptography=3.3.2-1 \
-        python3-venv=3.9.2-3 \
-        iputils-ping=3:20210202-1 \
-        git=1:2.30.2-1+deb11u2 \
-        curl=7.74.0-1.3+deb11u7 \
-        openssh-client=1:8.4p1-5+deb11u1 \
-        python3-cffi=1.14.5-1; \
-    if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
-        apt-get install -y --no-install-recommends \
-          build-essential=12.9 \
-          python3-dev=3.9.2-3 \
-          zlib1g-dev=1:1.2.11.dfsg-2+deb11u2 \
-          libjpeg-dev=1:2.0.6-4 \
-          libcairo2=1.16.0-5; \
-    fi; \
-    rm -rf \
+        python3-pip=23.0.1+dfsg-1 \
+        python3-setuptools=66.1.1-1 \
+        python3-venv=3.11.2-1+b1 \
+        python3-wheel=0.38.4-2 \
+        iputils-ping=3:20221126-1+deb12u1 \
+        git=1:2.39.5-0+deb12u1 \
+        curl=7.88.1-10+deb12u8 \
+        openssh-client=1:9.2p1-2+deb12u3 \
+        python3-cffi=1.15.1-5 \
+        libcairo2=1.16.0-7 \
+        libmagic1=1:5.44-3 \
+        patch=2.7.6-7 \
+    && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
         /var/lib/apt/lists/*
@@ -53,14 +56,18 @@ ENV \
 # See: https://unix.stackexchange.com/questions/553743/correct-way-to-add-lib-ld-linux-so-3-in-debian
 RUN \
     if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
-        ln -s /lib/arm-linux-gnueabihf/ld-linux.so.3 /lib/ld-linux.so.3; \
+        ln -s /lib/arm-linux-gnueabihf/ld-linux-armhf.so.3 /lib/ld-linux.so.3; \
     fi
 
 RUN \
     # Ubuntu python3-pip is missing wheel
-    pip3 install --no-cache-dir \
-        wheel==0.37.1 \
-        platformio==6.1.7 \
+    if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple"; \
+    fi; \
+    pip3 install \
+    --break-system-packages --no-cache-dir \
+    # Keep platformio version in sync with requirements.txt
+    platformio==6.1.16 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_platformio_interval 1000000 \
@@ -68,10 +75,57 @@ RUN \
 
 
 # First install requirements to leverage caching when requirements don't change
-COPY requirements.txt requirements_optional.txt script/platformio_install_deps.py platformio.ini /
-RUN \
-    pip3 install --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
-    && /platformio_install_deps.py /platformio.ini --libraries
+# tmpfs is for https://github.com/rust-lang/cargo/issues/8719
+
+COPY requirements.txt requirements_optional.txt /
+RUN --mount=type=tmpfs,target=/root/.cargo <<END-OF-RUN
+# Fail on any non-zero status
+set -e
+
+if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    curl -L https://www.piwheels.org/cp311/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl -o /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    pip3 install --break-system-packages --no-cache-dir /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    rm /tmp/cryptography-43.0.0-cp37-abi3-linux_armv7l.whl
+    export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple";
+fi
+
+# install build tools in case wheels are not available
+BUILD_DEPS="
+    build-essential=12.9
+    python3-dev=3.11.2-1+b1
+    zlib1g-dev=1:1.2.13.dfsg-1
+    libjpeg-dev=1:2.1.5-2
+    libfreetype-dev=2.12.1+dfsg-5+deb12u3
+    libssl-dev=3.0.15-1~deb12u1
+    libffi-dev=3.4.4-1
+    libopenjp2-7=2.5.0-2
+    libtiff6=4.5.0-6+deb12u1
+    cargo=0.66.0+ds1-1
+    pkg-config=1.8.1-1
+"
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ] || [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    apt-get update
+    apt-get install -y --no-install-recommends $BUILD_DEPS
+fi
+
+CARGO_REGISTRIES_CRATES_IO_PROTOCOL=sparse CARGO_HOME=/root/.cargo
+pip3 install --break-system-packages --no-cache-dir -r /requirements.txt -r /requirements_optional.txt
+
+if [ "$TARGETARCH$TARGETVARIANT" = "arm64" ] || [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]
+then
+    apt-get remove -y --purge --auto-remove $BUILD_DEPS
+    rm -rf /tmp/* /var/{cache,log}/* /var/lib/apt/lists/*
+fi
+END-OF-RUN
+
+
+COPY script/platformio_install_deps.py platformio.ini /
+RUN /platformio_install_deps.py /platformio.ini --libraries
+
+# Avoid unsafe git error when container user and file config volume permissions don't match
+RUN git config --system --add safe.directory '*'
 
 
 # ======================= docker-type image =======================
@@ -79,7 +133,11 @@ FROM base AS docker
 
 # Copy esphome and install
 COPY . /esphome
-RUN pip3 install --no-cache-dir --no-use-pep517 -e /esphome
+RUN if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple"; \
+  fi; \
+  pip3 install \
+  --break-system-packages --no-cache-dir -e /esphome
 
 # Settings for dashboard
 ENV USERNAME="" PASSWORD=""
@@ -87,6 +145,10 @@ ENV USERNAME="" PASSWORD=""
 # Expose the dashboard to Docker
 EXPOSE 6052
 
+# Run healthcheck (heartbeat)
+HEALTHCHECK --interval=30s --timeout=30s \
+  CMD curl --fail http://localhost:6052/version -A "HealthCheck" || exit 1
+
 COPY docker/docker_entrypoint.sh /entrypoint.sh
 
 # The directory the user should mount their configuration files to
@@ -108,7 +170,7 @@ RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
     && apt-get install -y --no-install-recommends \
-        nginx-light=1.18.0-6.1+deb11u3 \
+        nginx-light=1.22.1-9 \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
@@ -121,7 +183,11 @@ COPY docker/ha-addon-rootfs/ /
 
 # Copy esphome and install
 COPY . /esphome
-RUN pip3 install --no-cache-dir --no-use-pep517 -e /esphome
+RUN if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple"; \
+  fi; \
+  pip3 install \
+  --break-system-packages --no-cache-dir -e /esphome
 
 # Labels
 LABEL \
@@ -144,20 +210,24 @@ RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
     && apt-get install -y --no-install-recommends \
-        clang-format-13=1:13.0.1-6~deb11u1 \
-        clang-tidy-11=1:11.0.1-2 \
+        clang-format-13=1:13.0.1-11+b2 \
+        clang-tidy-14=1:14.0.6-12 \
         patch=2.7.6-7 \
-        software-properties-common=0.96.20.2-2.1 \
-        nano=5.4-2+deb11u2 \
+        software-properties-common=0.99.30-4.1~deb12u1 \
+        nano=7.2-1+deb12u1 \
         build-essential=12.9 \
-        python3-dev=3.9.2-3 \
+        python3-dev=3.11.2-1+b1 \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
         /var/lib/apt/lists/*
 
 COPY requirements_test.txt /
-RUN pip3 install --no-cache-dir -r /requirements_test.txt
+RUN if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        export PIP_EXTRA_INDEX_URL="https://www.piwheels.org/simple"; \
+  fi; \
+  pip3 install \
+  --break-system-packages --no-cache-dir -r /requirements_test.txt
 
 VOLUME ["/esphome"]
 WORKDIR /esphome

docker/docker_entrypoint.sh

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!/usr/bin/env bash
 
 # If /cache is mounted, use that as PIO's coredir
 # otherwise use path in /config (so that PIO packages aren't downloaded on each compile)
@@ -21,4 +21,10 @@ export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
 export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
 export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
 
+# If /build is mounted, use that as the build path
+# otherwise use path in /config (so that builds aren't lost on container restart)
+if [[ -d /build ]]; then
+    export ESPHOME_BUILD_PATH=/build
+fi
+
 exec esphome "$@"

docker/generate_tags.py

@@ -1,13 +1,14 @@
 #!/usr/bin/env python3
 import re
-import os
 import argparse
-import json
 
 CHANNEL_DEV = "dev"
 CHANNEL_BETA = "beta"
 CHANNEL_RELEASE = "release"
 
+GHCR = "ghcr"
+DOCKERHUB = "dockerhub"
+
 parser = argparse.ArgumentParser()
 parser.add_argument(
     "--tag",
@@ -21,21 +22,31 @@ parser.add_argument(
     required=True,
     help="The suffix of the tag.",
 )
+parser.add_argument(
+    "--registry",
+    type=str,
+    choices=[GHCR, DOCKERHUB],
+    required=False,
+    action="append",
+    help="The registry to build tags for.",
+)
 
 
 def main():
     args = parser.parse_args()
 
     # detect channel from tag
-    match = re.match(r"^(\d+\.\d+)(?:\.\d+)?(b\d+)?$", args.tag)
+    match = re.match(r"^(\d+\.\d+)(?:\.\d+)(?:(b\d+)|(-dev\d+))?$", args.tag)
     major_minor_version = None
-    if match is None:
+    if match is None:  # eg 2023.12.0-dev20231109-testbranch
+        channel = None  # Ran with custom tag for a branch etc
+    elif match.group(3) is not None:  # eg 2023.12.0-dev20231109
         channel = CHANNEL_DEV
-    elif match.group(2) is None:
+    elif match.group(2) is not None:  # eg 2023.12.0b1
+        channel = CHANNEL_BETA
+    else:  # eg 2023.12.0
         major_minor_version = match.group(1)
         channel = CHANNEL_RELEASE
-    else:
-        channel = CHANNEL_BETA
 
     tags_to_push = [args.tag]
     if channel == CHANNEL_DEV:
@@ -53,15 +64,28 @@ def main():
 
     suffix = f"-{args.suffix}" if args.suffix else ""
 
-    with open(os.environ["GITHUB_OUTPUT"], "w") as f:
-        print(f"channel={channel}", file=f)
-        print(f"image=esphome/esphome{suffix}", file=f)
-        full_tags = []
+    image_name = f"esphome/esphome{suffix}"
 
-        for tag in tags_to_push:
-            full_tags += [f"ghcr.io/esphome/esphome{suffix}:{tag}"]
-            full_tags += [f"esphome/esphome{suffix}:{tag}"]
-        print(f"tags={','.join(full_tags)}", file=f)
+    print(f"channel={channel}")
+
+    if args.registry is None:
+        args.registry = [GHCR, DOCKERHUB]
+    elif len(args.registry) == 1:
+        if GHCR in args.registry:
+            print(f"image=ghcr.io/{image_name}")
+        if DOCKERHUB in args.registry:
+            print(f"image=docker.io/{image_name}")
+
+    print(f"image_name={image_name}")
+
+    full_tags = []
+
+    for tag in tags_to_push:
+        if GHCR in args.registry:
+            full_tags += [f"ghcr.io/{image_name}:{tag}"]
+        if DOCKERHUB in args.registry:
+            full_tags += [f"docker.io/{image_name}:{tag}"]
+    print(f"tags={','.join(full_tags)}")
 
 
 if __name__ == "__main__":

docker/ha-addon-rootfs/etc/cont-init.d/30-esphome-fork.sh

@@ -0,0 +1,47 @@
+#!/usr/bin/with-contenv bashio
+# ==============================================================================
+# This file installs the user ESPHome fork if specified.
+# The fork must be up to date with the latest ESPHome dev branch
+# and have no conflicts.
+# This config option only exists in the ESPHome Dev add-on.
+# ==============================================================================
+
+declare esphome_fork
+
+if bashio::config.has_value 'esphome_fork'; then
+  esphome_fork=$(bashio::config 'esphome_fork')
+  # format: [username][/repository]:ref
+  if [[ "$esphome_fork" =~ ^(([^/]+)(/([^:]+))?:)?([^:/]+)$ ]]; then
+    username="${BASH_REMATCH[2]:-esphome}"
+    repository="${BASH_REMATCH[4]:-esphome}"
+    ref="${BASH_REMATCH[5]}"
+  else
+    bashio::exit.nok "Invalid esphome_fork format: $esphome_fork"
+  fi
+  full_url="https://github.com/${username}/${repository}/archive/${ref}.tar.gz"
+  bashio::log.info "Checking forked ESPHome"
+  dev_version=$(python3 -c "from esphome.const import __version__; print(__version__)")
+  bashio::log.info "Downloading ESPHome from fork '${esphome_fork}' (${full_url})..."
+  curl -L -o /tmp/esphome.tar.gz "${full_url}" -qq ||
+    bashio::exit.nok "Failed downloading ESPHome fork."
+  bashio::log.info "Installing ESPHome from fork '${esphome_fork}' (${full_url})..."
+  rm -rf /esphome || bashio::exit.nok "Failed to remove ESPHome."
+  mkdir /esphome
+  tar -zxf /tmp/esphome.tar.gz -C /esphome --strip-components=1 ||
+    bashio::exit.nok "Failed installing ESPHome from fork."
+  pip install -U -e /esphome || bashio::exit.nok "Failed installing ESPHome from fork."
+  rm -f /tmp/esphome.tar.gz
+  fork_version=$(python3 -c "from esphome.const import __version__; print(__version__)")
+
+  if [[ "$fork_version" != "$dev_version" ]]; then
+    bashio::log.error "############################"
+    bashio::log.error "Uninstalled fork as version does not match"
+    bashio::log.error "Update (or ask the author to update) the branch"
+    bashio::log.error "This is important as the dev addon and the dev ESPHome"
+    bashio::log.error "branch can have changes that are not compatible with old forks"
+    bashio::log.error "and get reported as bugs which we cannot solve easily."
+    bashio::log.error "############################"
+    bashio::exit.nok
+  fi
+  bashio::log.info "Installed ESPHome from fork '${esphome_fork}' (${full_url})..."
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/run

@@ -35,11 +35,23 @@ if bashio::config.has_value 'default_compile_process_limit'; then
     export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=$(bashio::config 'default_compile_process_limit')
 else
     if grep -q 'Raspberry Pi 3' /proc/cpuinfo; then
-        export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=1;
+        export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=1
     fi
 fi
 
 mkdir -p "${pio_cache_base}"
 
+mkdir -p /config/esphome
+
+if bashio::fs.directory_exists '/config/esphome/.esphome'; then
+    bashio::log.info "Migrating old .esphome directory..."
+    if bashio::fs.file_exists '/config/esphome/.esphome/esphome.json'; then
+        mv /config/esphome/.esphome/esphome.json /data/esphome.json
+    fi
+    mkdir -p "/data/storage"
+    mv /config/esphome/.esphome/*.json /data/storage/ || true
+    rm -rf /config/esphome/.esphome
+fi
+
 bashio::log.info "Starting ESPHome dashboard..."
 exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --ha-addon

esphome/__main__.py

@@ -1,46 +1,55 @@
+# PYTHON_ARGCOMPLETE_OK
 import argparse
+from datetime import datetime
 import functools
 import logging
 import os
 import re
 import sys
 import time
-from datetime import datetime
+
+import argcomplete
 
 from esphome import const, writer, yaml_util
 import esphome.codegen as cg
-from esphome.config import iter_components, read_config, strip_default_ids
+from esphome.config import iter_component_configs, read_config, strip_default_ids
 from esphome.const import (
     ALLOWED_NAME_CHARS,
     CONF_BAUD_RATE,
     CONF_BROKER,
     CONF_DEASSERT_RTS_DTR,
+    CONF_DISABLED,
+    CONF_ESPHOME,
+    CONF_LEVEL,
+    CONF_LOG_TOPIC,
     CONF_LOGGER,
+    CONF_MDNS,
+    CONF_MQTT,
     CONF_NAME,
     CONF_OTA,
-    CONF_MQTT,
-    CONF_MDNS,
-    CONF_DISABLED,
     CONF_PASSWORD,
-    CONF_PORT,
-    CONF_ESPHOME,
+    CONF_PLATFORM,
     CONF_PLATFORMIO_OPTIONS,
+    CONF_PORT,
     CONF_SUBSTITUTIONS,
+    CONF_TOPIC,
+    PLATFORM_BK72XX,
     PLATFORM_ESP32,
     PLATFORM_ESP8266,
     PLATFORM_RP2040,
+    PLATFORM_RTL87XX,
     SECRETS_FILES,
 )
 from esphome.core import CORE, EsphomeError, coroutine
-from esphome.helpers import indent, is_ip_address
+from esphome.helpers import get_bool_env, indent, is_ip_address
+from esphome.log import Fore, color, setup_log
 from esphome.util import (
+    get_serial_ports,
+    list_yaml_files,
     run_external_command,
     run_external_process,
     safe_print,
-    list_yaml_files,
-    get_serial_ports,
 )
-from esphome.log import color, setup_log, Fore
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -60,7 +69,7 @@ def choose_prompt(options, purpose: str = None):
         f'Found multiple options{f" for {purpose}" if purpose else ""}, please choose one:'
     )
     for i, (desc, _) in enumerate(options):
-        safe_print(f"  [{i+1}] {desc}")
+        safe_print(f"  [{i + 1}] {desc}")
 
     while True:
         opt = input("(number): ")
@@ -83,12 +92,18 @@ def choose_upload_log_host(
     options = []
     for port in get_serial_ports():
         options.append((f"{port.path} ({port.description})", port.path))
+    if default == "SERIAL":
+        return choose_prompt(options, purpose=purpose)
     if (show_ota and "ota" in CORE.config) or (show_api and "api" in CORE.config):
         options.append((f"Over The Air ({CORE.address})", CORE.address))
         if default == "OTA":
             return CORE.address
-    if show_mqtt and CONF_MQTT in CORE.config:
-        options.append((f"MQTT ({CORE.config['mqtt'][CONF_BROKER]})", "MQTT"))
+    if (
+        show_mqtt
+        and (mqtt_config := CORE.config.get(CONF_MQTT))
+        and mqtt_logging_enabled(mqtt_config)
+    ):
+        options.append((f"MQTT ({mqtt_config[CONF_BROKER]})", "MQTT"))
         if default == "OTA":
             return "MQTT"
     if default is not None:
@@ -98,6 +113,17 @@ def choose_upload_log_host(
     return choose_prompt(options, purpose=purpose)
 
 
+def mqtt_logging_enabled(mqtt_config):
+    log_topic = mqtt_config[CONF_LOG_TOPIC]
+    if log_topic is None:
+        return False
+    if CONF_TOPIC not in log_topic:
+        return False
+    if log_topic.get(CONF_LEVEL, None) == "NONE":
+        return False
+    return True
+
+
 def get_port_type(port):
     if port.startswith("/") or port.startswith("COM"):
         return "SERIAL"
@@ -108,6 +134,7 @@ def get_port_type(port):
 
 def run_miniterm(config, port):
     import serial
+
     from esphome import platformio_api
 
     if CONF_LOGGER not in config:
@@ -189,7 +216,7 @@ def write_cpp(config):
 def generate_cpp_contents(config):
     _LOGGER.info("Generating C++ source...")
 
-    for name, component, conf in iter_components(CORE.config):
+    for name, component, conf in iter_component_configs(CORE.config):
         if component.to_code is not None:
             coro = wrap_to_code(name, component)
             CORE.add_job(coro, conf)
@@ -216,14 +243,16 @@ def compile_program(args, config):
     return 0 if idedata is not None else 1
 
 
-def upload_using_esptool(config, port):
+def upload_using_esptool(config, port, file):
     from esphome import platformio_api
 
     first_baudrate = config[CONF_ESPHOME][CONF_PLATFORMIO_OPTIONS].get(
         "upload_speed", 460800
     )
 
-    def run_esptool(baud_rate):
+    if file is not None:
+        flash_images = [platformio_api.FlashImage(path=file, offset="0x0")]
+    else:
         idedata = platformio_api.get_idedata(config)
 
         firmware_offset = "0x10000" if CORE.is_esp32 else "0x0"
@@ -234,12 +263,13 @@ def upload_using_esptool(config, port):
             *idedata.extra_flash_images,
         ]
 
-        mcu = "esp8266"
-        if CORE.is_esp32:
-            from esphome.components.esp32 import get_esp32_variant
+    mcu = "esp8266"
+    if CORE.is_esp32:
+        from esphome.components.esp32 import get_esp32_variant
 
-            mcu = get_esp32_variant().lower()
+        mcu = get_esp32_variant().lower()
 
+    def run_esptool(baud_rate):
         cmd = [
             "esptool.py",
             "--before",
@@ -278,39 +308,69 @@ def upload_using_esptool(config, port):
     return run_esptool(115200)
 
 
+def upload_using_platformio(config, port):
+    from esphome import platformio_api
+
+    upload_args = ["-t", "upload", "-t", "nobuild"]
+    if port is not None:
+        upload_args += ["--upload-port", port]
+    return platformio_api.run_platformio_cli_run(config, CORE.verbose, *upload_args)
+
+
+def check_permissions(port):
+    if os.name == "posix" and get_port_type(port) == "SERIAL":
+        # Check if we can open selected serial port
+        if not os.access(port, os.F_OK):
+            raise EsphomeError(
+                "The selected serial port does not exist. To resolve this issue, "
+                "check that the device is connected to this computer with a USB cable and that "
+                "the USB cable can be used for data and is not a power-only cable."
+            )
+        if not (os.access(port, os.R_OK | os.W_OK)):
+            raise EsphomeError(
+                "You do not have read or write permission on the selected serial port. "
+                "To resolve this issue, you can add your user to the dialout group "
+                f"by running the following command: sudo usermod -a -G dialout {os.getlogin()}. "
+                "You will need to log out & back in or reboot to activate the new group access."
+            )
+
+
 def upload_program(config, args, host):
     if get_port_type(host) == "SERIAL":
+        check_permissions(host)
         if CORE.target_platform in (PLATFORM_ESP32, PLATFORM_ESP8266):
-            return upload_using_esptool(config, host)
+            file = getattr(args, "file", None)
+            return upload_using_esptool(config, host, file)
 
         if CORE.target_platform in (PLATFORM_RP2040):
-            from esphome import platformio_api
+            return upload_using_platformio(config, args.device)
 
-            upload_args = ["-t", "upload"]
-            if args.device is not None:
-                upload_args += ["--upload-port", args.device]
-            return platformio_api.run_platformio_cli_run(
-                config, CORE.verbose, *upload_args
-            )
+        if CORE.target_platform in (PLATFORM_BK72XX, PLATFORM_RTL87XX):
+            return upload_using_platformio(config, host)
 
         return 1  # Unknown target platform
 
-    if CONF_OTA not in config:
+    ota_conf = {}
+    for ota_item in config.get(CONF_OTA, []):
+        if ota_item[CONF_PLATFORM] == CONF_ESPHOME:
+            ota_conf = ota_item
+            break
+
+    if not ota_conf:
         raise EsphomeError(
-            "Cannot upload Over the Air as the config does not include the ota: "
-            "component"
+            f"Cannot upload Over the Air as the {CONF_OTA} configuration is not present or does not include {CONF_PLATFORM}: {CONF_ESPHOME}"
         )
 
     from esphome import espota2
 
-    ota_conf = config[CONF_OTA]
     remote_port = ota_conf[CONF_PORT]
     password = ota_conf.get(CONF_PASSWORD, "")
 
     if (
-        not is_ip_address(CORE.address)
+        not is_ip_address(CORE.address)  # pylint: disable=too-many-boolean-expressions
         and (get_port_type(host) == "MQTT" or config[CONF_MDNS][CONF_DISABLED])
         and CONF_MQTT in config
+        and (not args.device or args.device in ("MQTT", "OTA"))
     ):
         from esphome import mqtt
 
@@ -328,6 +388,7 @@ def show_logs(config, args, port):
     if "logger" not in config:
         raise EsphomeError("Logger is not configured!")
     if get_port_type(port) == "SERIAL":
+        check_permissions(port)
         return run_miniterm(config, port)
     if get_port_type(port) == "NETWORK" and "api" in config:
         if config[CONF_MDNS][CONF_DISABLED] and CONF_MQTT in config:
@@ -335,7 +396,7 @@ def show_logs(config, args, port):
 
             port = mqtt.get_esphome_device_ip(
                 config, args.username, args.password, args.client_id
-            )
+            )[0]
 
         from esphome.components.api.client import run_logs
 
@@ -371,9 +432,10 @@ def command_config(args, config):
     # add the console decoration so the front-end can hide the secrets
     if not args.show_secrets:
         output = re.sub(
-            r"(password|key|psk|ssid)\:\s(.*)", r"\1: \\033[5m\2\\033[6m", output
+            r"(password|key|psk|ssid)\: (.+)", r"\1: \\033[5m\2\\033[6m", output
         )
-    safe_print(output)
+    if not CORE.quiet:
+        safe_print(output)
     _LOGGER.info("Configuration is valid!")
     return 0
 
@@ -445,6 +507,15 @@ def command_run(args, config):
     if exit_code != 0:
         return exit_code
     _LOGGER.info("Successfully compiled program.")
+    if CORE.is_host:
+        from esphome.platformio_api import get_idedata
+
+        idedata = get_idedata(config)
+        if idedata is None:
+            return 1
+        program_path = idedata.raw["prog_path"]
+        return run_external_process(program_path)
+
     port = choose_upload_log_host(
         default=args.device,
         check_default=None,
@@ -498,7 +569,7 @@ def command_clean(args, config):
 def command_dashboard(args):
     from esphome.dashboard import dashboard
 
-    return dashboard.start_web_server(args)
+    return dashboard.start_dashboard(args)
 
 
 def command_update_all(args):
@@ -544,9 +615,10 @@ def command_update_all(args):
 
 
 def command_idedata(args, config):
-    from esphome import platformio_api
     import json
 
+    from esphome import platformio_api
+
     logging.disable(logging.INFO)
     logging.disable(logging.WARNING)
 
@@ -643,7 +715,8 @@ def command_rename(args, config):
         os.remove(new_path)
         return 1
 
-    os.remove(CORE.config_path)
+    if CORE.config_path != new_path:
+        os.remove(CORE.config_path)
 
     print(color(Fore.BOLD_GREEN, "SUCCESS"))
     print()
@@ -676,7 +749,11 @@ POST_CONFIG_ACTIONS = {
 def parse_args(argv):
     options_parser = argparse.ArgumentParser(add_help=False)
     options_parser.add_argument(
-        "-v", "--verbose", help="Enable verbose ESPHome logs.", action="store_true"
+        "-v",
+        "--verbose",
+        help="Enable verbose ESPHome logs.",
+        action="store_true",
+        default=get_bool_env("ESPHOME_VERBOSE"),
     )
     options_parser.add_argument(
         "-q", "--quiet", help="Disable all ESPHome logs.", action="store_true"
@@ -694,7 +771,14 @@ def parse_args(argv):
     )
 
     parser = argparse.ArgumentParser(
-        description=f"ESPHome v{const.__version__}", parents=[options_parser]
+        description=f"ESPHome {const.__version__}", parents=[options_parser]
+    )
+
+    parser.add_argument(
+        "--version",
+        action="version",
+        version=f"Version: {const.__version__}",
+        help="Print the ESPHome version and exit.",
     )
 
     mqtt_options = argparse.ArgumentParser(add_help=False)
@@ -731,7 +815,9 @@ def parse_args(argv):
     )
 
     parser_upload = subparsers.add_parser(
-        "upload", help="Validate the configuration and upload the latest binary."
+        "upload",
+        help="Validate the configuration and upload the latest binary.",
+        parents=[mqtt_options],
     )
     parser_upload.add_argument(
         "configuration", help="Your YAML configuration file(s).", nargs="+"
@@ -748,6 +834,7 @@ def parse_args(argv):
     parser_logs = subparsers.add_parser(
         "logs",
         help="Validate the configuration and show all logs.",
+        aliases=["log"],
         parents=[mqtt_options],
     )
     parser_logs.add_argument(
@@ -892,67 +979,7 @@ def parse_args(argv):
     # a deprecation warning).
     arguments = argv[1:]
 
-    # On Python 3.9+ we can simply set exit_on_error=False in the constructor
-    def _raise(x):
-        raise argparse.ArgumentError(None, x)
-
-    # First, try new-style parsing, but don't exit in case of failure
-    try:
-        # duplicate parser so that we can use the original one to raise errors later on
-        current_parser = argparse.ArgumentParser(add_help=False, parents=[parser])
-        current_parser.set_defaults(deprecated_argv_suggestion=None)
-        current_parser.error = _raise
-        return current_parser.parse_args(arguments)
-    except argparse.ArgumentError:
-        pass
-
-    # Second, try compat parsing and rearrange the command-line if it succeeds
-    # Disable argparse's built-in help option and add it manually to prevent this
-    # parser from printing the help messagefor the old format when invoked with -h.
-    compat_parser = argparse.ArgumentParser(parents=[options_parser], add_help=False)
-    compat_parser.add_argument("-h", "--help", action="store_true")
-    compat_parser.add_argument("configuration", nargs="*")
-    compat_parser.add_argument(
-        "command",
-        choices=[
-            "config",
-            "compile",
-            "upload",
-            "logs",
-            "run",
-            "clean-mqtt",
-            "wizard",
-            "mqtt-fingerprint",
-            "version",
-            "clean",
-            "dashboard",
-            "vscode",
-            "update-all",
-        ],
-    )
-
-    try:
-        compat_parser.error = _raise
-        result, unparsed = compat_parser.parse_known_args(argv[1:])
-        last_option = len(arguments) - len(unparsed) - 1 - len(result.configuration)
-        unparsed = [
-            "--device" if arg in ("--upload-port", "--serial-port") else arg
-            for arg in unparsed
-        ]
-        arguments = (
-            arguments[0:last_option]
-            + [result.command]
-            + result.configuration
-            + unparsed
-        )
-        deprecated_argv_suggestion = arguments
-    except argparse.ArgumentError:
-        # old-style parsing failed, don't suggest any argument
-        deprecated_argv_suggestion = None
-
-    # Finally, run the new-style parser again with the possibly swapped arguments,
-    # and let it error out if the command is unparsable.
-    parser.set_defaults(deprecated_argv_suggestion=deprecated_argv_suggestion)
+    argcomplete.autocomplete(parser)
     return parser.parse_args(arguments)
 
 
@@ -966,20 +993,6 @@ def run_esphome(argv):
         # Show timestamp for dashboard access logs
         args.command == "dashboard",
     )
-    if args.deprecated_argv_suggestion is not None and args.command != "vscode":
-        _LOGGER.warning(
-            "Calling ESPHome with the configuration before the command is deprecated "
-            "and will be removed in the future. "
-        )
-        _LOGGER.warning("Please instead use:")
-        _LOGGER.warning("   esphome %s", " ".join(args.deprecated_argv_suggestion))
-
-    if sys.version_info < (3, 8, 0):
-        _LOGGER.error(
-            "You're running ESPHome with Python <3.8. ESPHome is no longer compatible "
-            "with this Python version. Please reinstall ESPHome with Python 3.8+"
-        )
-        return 1
 
     if args.command in PRE_CONFIG_ACTIONS:
         try:

esphome/automation.py

@@ -1,26 +1,39 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_ALL,
+    CONF_ANY,
     CONF_AUTOMATION_ID,
     CONF_CONDITION,
     CONF_COUNT,
     CONF_ELSE,
     CONF_ID,
     CONF_THEN,
+    CONF_TIME,
     CONF_TIMEOUT,
     CONF_TRIGGER_ID,
     CONF_TYPE_ID,
-    CONF_TIME,
+    CONF_UPDATE_INTERVAL,
 )
 from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
 from esphome.util import Registry
 
 
 def maybe_simple_id(*validators):
+    """Allow a raw ID to be specified in place of a config block.
+    If the value that's being validated is a dictionary, it's passed as-is to the specified validators. Otherwise, it's
+    wrapped in a dict that looks like ``{"id": <value>}``, and that dict is then handed off to the specified validators.
+    """
     return maybe_conf(CONF_ID, *validators)
 
 
 def maybe_conf(conf, *validators):
+    """Allow a raw value to be specified in place of a config block.
+    If the value that's being validated is a dictionary, it's passed as-is to the specified validators. Otherwise, it's
+    wrapped in a dict that looks like ``{<conf>: <value>}``, and that dict is then handed off to the specified
+    validators.
+    (This is a general case of ``maybe_simple_id`` that allows the wrapping key to be something other than ``id``.)
+    """
     validator = cv.All(*validators)
 
     @schema_extractor("maybe")
@@ -62,6 +75,13 @@ def validate_potentially_and_condition(value):
     return validate_condition(value)
 
 
+def validate_potentially_or_condition(value):
+    if isinstance(value, list):
+        with cv.remove_prepend_path(["or"]):
+            return validate_condition({"or": value})
+    return validate_condition(value)
+
+
 DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component)
 LambdaAction = cg.esphome_ns.class_("LambdaAction", Action)
 IfAction = cg.esphome_ns.class_("IfAction", Action)
@@ -69,6 +89,8 @@ WhileAction = cg.esphome_ns.class_("WhileAction", Action)
 RepeatAction = cg.esphome_ns.class_("RepeatAction", Action)
 WaitUntilAction = cg.esphome_ns.class_("WaitUntilAction", Action, cg.Component)
 UpdateComponentAction = cg.esphome_ns.class_("UpdateComponentAction", Action)
+SuspendComponentAction = cg.esphome_ns.class_("SuspendComponentAction", Action)
+ResumeComponentAction = cg.esphome_ns.class_("ResumeComponentAction", Action)
 Automation = cg.esphome_ns.class_("Automation")
 
 LambdaCondition = cg.esphome_ns.class_("LambdaCondition", Condition)
@@ -138,6 +160,7 @@ AUTOMATION_SCHEMA = cv.Schema(
 AndCondition = cg.esphome_ns.class_("AndCondition", Condition)
 OrCondition = cg.esphome_ns.class_("OrCondition", Condition)
 NotCondition = cg.esphome_ns.class_("NotCondition", Condition)
+XorCondition = cg.esphome_ns.class_("XorCondition", Condition)
 
 
 @register_condition("and", AndCondition, validate_condition_list)
@@ -152,12 +175,30 @@ async def or_condition_to_code(config, condition_id, template_arg, args):
     return cg.new_Pvariable(condition_id, template_arg, conditions)
 
 
+@register_condition("all", AndCondition, validate_condition_list)
+async def all_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
+@register_condition("any", OrCondition, validate_condition_list)
+async def any_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
 @register_condition("not", NotCondition, validate_potentially_and_condition)
 async def not_condition_to_code(config, condition_id, template_arg, args):
     condition = await build_condition(config, template_arg, args)
     return cg.new_Pvariable(condition_id, template_arg, condition)
 
 
+@register_condition("xor", XorCondition, validate_condition_list)
+async def xor_condition_to_code(config, condition_id, template_arg, args):
+    conditions = await build_condition_list(config, template_arg, args)
+    return cg.new_Pvariable(condition_id, template_arg, conditions)
+
+
 @register_condition("lambda", LambdaCondition, cv.returning_lambda)
 async def lambda_condition_to_code(config, condition_id, template_arg, args):
     lambda_ = await cg.process_lambda(config, args, return_type=bool)
@@ -203,15 +244,21 @@ async def delay_action_to_code(config, action_id, template_arg, args):
     IfAction,
     cv.All(
         {
-            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+            cv.Exclusive(
+                CONF_CONDITION, CONF_CONDITION
+            ): validate_potentially_and_condition,
+            cv.Exclusive(CONF_ANY, CONF_CONDITION): validate_potentially_or_condition,
+            cv.Exclusive(CONF_ALL, CONF_CONDITION): validate_potentially_and_condition,
             cv.Optional(CONF_THEN): validate_action_list,
             cv.Optional(CONF_ELSE): validate_action_list,
         },
         cv.has_at_least_one_key(CONF_THEN, CONF_ELSE),
+        cv.has_at_least_one_key(CONF_CONDITION, CONF_ANY, CONF_ALL),
     ),
 )
 async def if_action_to_code(config, action_id, template_arg, args):
-    conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
+    cond_conf = next(el for el in config if el in (CONF_ANY, CONF_ALL, CONF_CONDITION))
+    conditions = await build_condition(config[cond_conf], template_arg, args)
     var = cg.new_Pvariable(action_id, template_arg, conditions)
     if CONF_THEN in config:
         actions = await build_action_list(config[CONF_THEN], template_arg, args)
@@ -303,6 +350,41 @@ async def component_update_action_to_code(config, action_id, template_arg, args)
     return cg.new_Pvariable(action_id, template_arg, comp)
 
 
+@register_action(
+    "component.suspend",
+    SuspendComponentAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
+        }
+    ),
+)
+async def component_suspend_action_to_code(config, action_id, template_arg, args):
+    comp = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, comp)
+
+
+@register_action(
+    "component.resume",
+    ResumeComponentAction,
+    maybe_simple_id(
+        {
+            cv.Required(CONF_ID): cv.use_id(cg.PollingComponent),
+            cv.Optional(CONF_UPDATE_INTERVAL): cv.templatable(
+                cv.positive_time_period_milliseconds
+            ),
+        }
+    ),
+)
+async def component_resume_action_to_code(config, action_id, template_arg, args):
+    comp = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, comp)
+    if CONF_UPDATE_INTERVAL in config:
+        template_ = await cg.templatable(config[CONF_UPDATE_INTERVAL], args, int)
+        cg.add(var.set_update_interval(template_))
+    return var
+
+
 async def build_action(full_config, template_arg, args):
     registry_entry, config = cg.extract_registry_entry_config(
         ACTION_REGISTRY, full_config

esphome/codegen.py

@@ -8,83 +8,86 @@
 # want to break suddenly due to a rename (this file will get backports for features).
 
 # pylint: disable=unused-import
-from esphome.cpp_generator import (  # noqa
+from esphome.cpp_generator import (  # noqa: F401
+    ArrayInitializer,
     Expression,
+    LineComment,
+    MockObj,
+    MockObjClass,
+    Pvariable,
     RawExpression,
     RawStatement,
-    TemplateArguments,
-    StructInitializer,
-    ArrayInitializer,
-    safe_exp,
     Statement,
-    LineComment,
-    progmem_array,
-    static_const_array,
-    statement,
-    variable,
-    with_local_variable,
-    new_variable,
-    Pvariable,
-    new_Pvariable,
+    StructInitializer,
+    TemplateArguments,
     add,
-    add_global,
-    add_library,
     add_build_flag,
     add_define,
+    add_global,
+    add_library,
     add_platformio_option,
     get_variable,
     get_variable_with_full_id,
-    process_lambda,
     is_template,
+    new_Pvariable,
+    new_variable,
+    process_lambda,
+    progmem_array,
+    safe_exp,
+    statement,
+    static_const_array,
     templatable,
-    MockObj,
-    MockObjClass,
+    variable,
+    with_local_variable,
 )
-from esphome.cpp_helpers import (  # noqa
-    gpio_pin_expression,
-    register_component,
+from esphome.cpp_helpers import (  # noqa: F401
     build_registry_entry,
     build_registry_list,
     extract_registry_entry_config,
-    register_parented,
+    gpio_pin_expression,
     past_safe_mode,
+    register_component,
+    register_parented,
 )
-from esphome.cpp_types import (  # noqa
-    global_ns,
-    void,
-    nullptr,
-    float_,
-    double,
+from esphome.cpp_types import (  # noqa: F401
+    NAN,
+    App,
+    Application,
+    Component,
+    ComponentPtr,
+    Controller,
+    EntityBase,
+    EntityCategory,
+    ESPTime,
+    GPIOPin,
+    InternalGPIOPin,
+    JsonObject,
+    JsonObjectConst,
+    Parented,
+    PollingComponent,
+    arduino_json_ns,
     bool_,
+    const_char_ptr,
+    double,
+    esphome_ns,
+    float_,
+    global_ns,
+    gpio_Flags,
+    int16,
+    int32,
+    int64,
     int_,
+    nullptr,
+    optional,
+    size_t,
     std_ns,
+    std_shared_ptr,
     std_string,
+    std_string_ref,
     std_vector,
     uint8,
     uint16,
     uint32,
     uint64,
-    int16,
-    int32,
-    int64,
-    size_t,
-    const_char_ptr,
-    NAN,
-    esphome_ns,
-    App,
-    EntityBase,
-    Component,
-    ComponentPtr,
-    PollingComponent,
-    Application,
-    optional,
-    arduino_json_ns,
-    JsonObject,
-    JsonObjectConst,
-    Controller,
-    GPIOPin,
-    InternalGPIOPin,
-    gpio_Flags,
-    EntityCategory,
-    Parented,
+    void,
 )

esphome/components/a01nyub/a01nyub.cpp

@@ -8,50 +8,37 @@ namespace esphome {
 namespace a01nyub {
 
 static const char *const TAG = "a01nyub.sensor";
-static const uint8_t MAX_DATA_LENGTH_BYTES = 4;
 
 void A01nyubComponent::loop() {
   uint8_t data;
   while (this->available() > 0) {
-    if (this->read_byte(&data)) {
-      buffer_.push_back(data);
+    this->read_byte(&data);
+    if (this->buffer_.empty() && (data != 0xff))
+      continue;
+    buffer_.push_back(data);
+    if (this->buffer_.size() == 4)
       this->check_buffer_();
-    }
   }
 }
 
 void A01nyubComponent::check_buffer_() {
-  if (this->buffer_.size() >= MAX_DATA_LENGTH_BYTES) {
-    size_t i;
-    for (i = 0; i < this->buffer_.size(); i++) {
-      // Look for the first packet
-      if (this->buffer_[i] == 0xFF) {
-        if (i + 1 + 3 < this->buffer_.size()) {  // Packet is not complete
-          return;                                // Wait for completion
-        }
-
-        uint8_t checksum = (this->buffer_[i] + this->buffer_[i + 1] + this->buffer_[i + 2]) & 0xFF;
-        if (this->buffer_[i + 3] == checksum) {
-          float distance = (this->buffer_[i + 1] << 8) + this->buffer_[i + 2];
-          if (distance > 280) {
-            float meters = distance / 1000.0;
-            ESP_LOGV(TAG, "Distance from sensor: %f mm, %f m", distance, meters);
-            this->publish_state(meters);
-          } else {
-            ESP_LOGW(TAG, "Invalid data read from sensor: %s", format_hex_pretty(this->buffer_).c_str());
-          }
-        }
-        break;
-      }
+  uint8_t checksum = this->buffer_[0] + this->buffer_[1] + this->buffer_[2];
+  if (this->buffer_[3] == checksum) {
+    float distance = (this->buffer_[1] << 8) + this->buffer_[2];
+    if (distance > 280) {
+      float meters = distance / 1000.0;
+      ESP_LOGV(TAG, "Distance from sensor: %f mm, %f m", distance, meters);
+      this->publish_state(meters);
+    } else {
+      ESP_LOGW(TAG, "Invalid data read from sensor: %s", format_hex_pretty(this->buffer_).c_str());
     }
-    this->buffer_.clear();
+  } else {
+    ESP_LOGW(TAG, "checksum failed: %02x != %02x", checksum, this->buffer_[3]);
   }
+  this->buffer_.clear();
 }
 
-void A01nyubComponent::dump_config() {
-  ESP_LOGCONFIG(TAG, "A01nyub Sensor:");
-  LOG_SENSOR("  ", "Distance", this);
-}
+void A01nyubComponent::dump_config() { LOG_SENSOR("", "A01nyub Sensor", this); }
 
 }  // namespace a01nyub
 }  // namespace esphome

esphome/components/a02yyuw/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@TH-Braemer"]

esphome/components/a02yyuw/a02yyuw.cpp

@@ -0,0 +1,43 @@
+// Datasheet https://wiki.dfrobot.com/_A02YYUW_Waterproof_Ultrasonic_Sensor_SKU_SEN0311
+
+#include "a02yyuw.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace a02yyuw {
+
+static const char *const TAG = "a02yyuw.sensor";
+
+void A02yyuwComponent::loop() {
+  uint8_t data;
+  while (this->available() > 0) {
+    this->read_byte(&data);
+    if (this->buffer_.empty() && (data != 0xff))
+      continue;
+    buffer_.push_back(data);
+    if (this->buffer_.size() == 4)
+      this->check_buffer_();
+  }
+}
+
+void A02yyuwComponent::check_buffer_() {
+  uint8_t checksum = this->buffer_[0] + this->buffer_[1] + this->buffer_[2];
+  if (this->buffer_[3] == checksum) {
+    float distance = (this->buffer_[1] << 8) + this->buffer_[2];
+    if (distance > 30) {
+      ESP_LOGV(TAG, "Distance from sensor: %f mm", distance);
+      this->publish_state(distance);
+    } else {
+      ESP_LOGW(TAG, "Invalid data read from sensor: %s", format_hex_pretty(this->buffer_).c_str());
+    }
+  } else {
+    ESP_LOGW(TAG, "checksum failed: %02x != %02x", checksum, this->buffer_[3]);
+  }
+  this->buffer_.clear();
+}
+
+void A02yyuwComponent::dump_config() { LOG_SENSOR("", "A02yyuw Sensor", this); }
+
+}  // namespace a02yyuw
+}  // namespace esphome

esphome/components/a02yyuw/a02yyuw.h

@@ -0,0 +1,27 @@
+#pragma once
+
+#include <vector>
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/uart/uart.h"
+
+namespace esphome {
+namespace a02yyuw {
+
+class A02yyuwComponent : public sensor::Sensor, public Component, public uart::UARTDevice {
+ public:
+  // Nothing really public.
+
+  // ========== INTERNAL METHODS ==========
+  void loop() override;
+  void dump_config() override;
+
+ protected:
+  void check_buffer_();
+
+  std::vector<uint8_t> buffer_;
+};
+
+}  // namespace a02yyuw
+}  // namespace esphome

esphome/components/a02yyuw/sensor.py

@@ -0,0 +1,41 @@
+import esphome.codegen as cg
+from esphome.components import sensor, uart
+from esphome.const import (
+    STATE_CLASS_MEASUREMENT,
+    ICON_ARROW_EXPAND_VERTICAL,
+    DEVICE_CLASS_DISTANCE,
+    UNIT_MILLIMETER,
+)
+
+CODEOWNERS = ["@TH-Braemer"]
+DEPENDENCIES = ["uart"]
+
+a02yyuw_ns = cg.esphome_ns.namespace("a02yyuw")
+A02yyuwComponent = a02yyuw_ns.class_(
+    "A02yyuwComponent", sensor.Sensor, cg.Component, uart.UARTDevice
+)
+
+CONFIG_SCHEMA = sensor.sensor_schema(
+    A02yyuwComponent,
+    unit_of_measurement=UNIT_MILLIMETER,
+    icon=ICON_ARROW_EXPAND_VERTICAL,
+    accuracy_decimals=0,
+    state_class=STATE_CLASS_MEASUREMENT,
+    device_class=DEVICE_CLASS_DISTANCE,
+).extend(uart.UART_DEVICE_SCHEMA)
+
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    "a02yyuw",
+    baud_rate=9600,
+    require_tx=False,
+    require_rx=True,
+    data_bits=8,
+    parity=None,
+    stop_bits=1,
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+    await uart.register_uart_device(var, config)

esphome/components/adc/__init__.py

@@ -1,13 +1,16 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome import pins
-from esphome.const import CONF_INPUT
+from esphome.const import CONF_ANALOG, CONF_INPUT, CONF_NUMBER
 
 from esphome.core import CORE
 from esphome.components.esp32 import get_esp32_variant
+from esphome.const import PLATFORM_ESP8266
 from esphome.components.esp32.const import (
     VARIANT_ESP32,
+    VARIANT_ESP32C2,
     VARIANT_ESP32C3,
+    VARIANT_ESP32C6,
     VARIANT_ESP32H2,
     VARIANT_ESP32S2,
     VARIANT_ESP32S3,
@@ -15,11 +18,23 @@ from esphome.components.esp32.const import (
 
 CODEOWNERS = ["@esphome/core"]
 
+adc_ns = cg.esphome_ns.namespace("adc")
+
+
+"""
+From the below patch versions (and 5.2+) ADC_ATTEN_DB_11 is deprecated and replaced with ADC_ATTEN_DB_12.
+4.4.7
+5.0.5
+5.1.3
+5.2+
+"""
+
 ATTENUATION_MODES = {
     "0db": cg.global_ns.ADC_ATTEN_DB_0,
     "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
     "6db": cg.global_ns.ADC_ATTEN_DB_6,
-    "11db": cg.global_ns.ADC_ATTEN_DB_11,
+    "11db": adc_ns.ADC_ATTEN_DB_12_COMPAT,
+    "12db": adc_ns.ADC_ATTEN_DB_12_COMPAT,
     "auto": "auto",
 }
 
@@ -70,6 +85,22 @@ ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
         3: adc1_channel_t.ADC1_CHANNEL_3,
         4: adc1_channel_t.ADC1_CHANNEL_4,
     },
+    VARIANT_ESP32C2: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+    },
+    VARIANT_ESP32C6: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+        5: adc1_channel_t.ADC1_CHANNEL_5,
+        6: adc1_channel_t.ADC1_CHANNEL_6,
+    },
     VARIANT_ESP32H2: {
         0: adc1_channel_t.ADC1_CHANNEL_0,
         1: adc1_channel_t.ADC1_CHANNEL_1,
@@ -120,18 +151,24 @@ ESP32_VARIANT_ADC2_PIN_TO_CHANNEL = {
     VARIANT_ESP32C3: {
         5: adc2_channel_t.ADC2_CHANNEL_0,
     },
+    VARIANT_ESP32C2: {},
+    VARIANT_ESP32C6: {},
+    VARIANT_ESP32H2: {},
 }
 
 
 def validate_adc_pin(value):
     if str(value).upper() == "VCC":
-        return cv.only_on_esp8266("VCC")
+        if CORE.is_rp2040:
+            return pins.internal_gpio_input_pin_schema(29)
+        return cv.only_on([PLATFORM_ESP8266])("VCC")
 
     if str(value).upper() == "TEMPERATURE":
         return cv.only_on_rp2040("TEMPERATURE")
 
     if CORE.is_esp32:
-        value = pins.internal_gpio_input_pin_number(value)
+        conf = pins.internal_gpio_input_pin_schema(value)
+        value = conf[CONF_NUMBER]
         variant = get_esp32_variant()
         if (
             variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL
@@ -145,25 +182,27 @@ def validate_adc_pin(value):
         ):
             raise cv.Invalid(f"{variant} doesn't support ADC on this pin")
 
-        return pins.internal_gpio_input_pin_schema(value)
+        return conf
 
     if CORE.is_esp8266:
-        from esphome.components.esp8266.gpio import CONF_ANALOG
+        conf = pins.gpio_pin_schema(
+            {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
+        )(value)
 
-        value = pins.internal_gpio_pin_number({CONF_ANALOG: True, CONF_INPUT: True})(
-            value
-        )
-
-        if value != 17:  # A0
+        if conf[CONF_NUMBER] != 17:  # A0
             raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC")
+        return conf
+
+    if CORE.is_rp2040:
+        conf = pins.internal_gpio_input_pin_schema(value)
+        number = conf[CONF_NUMBER]
+        if number not in (26, 27, 28, 29):
+            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC")
+        return conf
+
+    if CORE.is_libretiny:
         return pins.gpio_pin_schema(
             {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
         )(value)
 
-    if CORE.is_rp2040:
-        value = pins.internal_gpio_input_pin_number(value)
-        if value not in (26, 27, 28, 29):
-            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC")
-        return pins.internal_gpio_input_pin_schema(value)
-
     raise NotImplementedError

esphome/components/adc/adc_sensor.cpp

@@ -1,6 +1,6 @@
 #include "adc_sensor.h"
-#include "esphome/core/log.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
 
 #ifdef USE_ESP8266
 #ifdef USE_ADC_SENSOR_VCC
@@ -12,6 +12,9 @@ ADC_MODE(ADC_VCC)
 #endif
 
 #ifdef USE_RP2040
+#ifdef CYW43_USES_VSYS_PIN
+#include "pico/cyw43_arch.h"
+#endif
 #include <hardware/adc.h>
 #endif
 
@@ -43,27 +46,27 @@ extern "C"
     ADCSensor::setup() {
   ESP_LOGCONFIG(TAG, "Setting up ADC '%s'...", this->get_name().c_str());
 #if !defined(USE_ADC_SENSOR_VCC) && !defined(USE_RP2040)
-  pin_->setup();
+  this->pin_->setup();
 #endif
 
 #ifdef USE_ESP32
-  if (channel1_ != ADC1_CHANNEL_MAX) {
+  if (this->channel1_ != ADC1_CHANNEL_MAX) {
     adc1_config_width(ADC_WIDTH_MAX_SOC_BITS);
-    if (!autorange_) {
-      adc1_config_channel_atten(channel1_, attenuation_);
+    if (!this->autorange_) {
+      adc1_config_channel_atten(this->channel1_, this->attenuation_);
     }
-  } else if (channel2_ != ADC2_CHANNEL_MAX) {
-    if (!autorange_) {
-      adc2_config_channel_atten(channel2_, attenuation_);
+  } else if (this->channel2_ != ADC2_CHANNEL_MAX) {
+    if (!this->autorange_) {
+      adc2_config_channel_atten(this->channel2_, this->attenuation_);
     }
   }
 
   // load characteristics for each attenuation
-  for (int32_t i = 0; i <= ADC_ATTEN_DB_11; i++) {
-    auto adc_unit = channel1_ != ADC1_CHANNEL_MAX ? ADC_UNIT_1 : ADC_UNIT_2;
+  for (int32_t i = 0; i <= ADC_ATTEN_DB_12_COMPAT; i++) {
+    auto adc_unit = this->channel1_ != ADC1_CHANNEL_MAX ? ADC_UNIT_1 : ADC_UNIT_2;
     auto cal_value = esp_adc_cal_characterize(adc_unit, (adc_atten_t) i, ADC_WIDTH_MAX_SOC_BITS,
                                               1100,  // default vref
-                                              &cal_characteristics_[i]);
+                                              &this->cal_characteristics_[i]);
     switch (cal_value) {
       case ESP_ADC_CAL_VAL_EFUSE_VREF:
         ESP_LOGV(TAG, "Using eFuse Vref for calibration");
@@ -92,44 +95,50 @@ extern "C"
 
 void ADCSensor::dump_config() {
   LOG_SENSOR("", "ADC Sensor", this);
-#ifdef USE_ESP8266
+#if defined(USE_ESP8266) || defined(USE_LIBRETINY)
 #ifdef USE_ADC_SENSOR_VCC
   ESP_LOGCONFIG(TAG, "  Pin: VCC");
 #else
-  LOG_PIN("  Pin: ", pin_);
+  LOG_PIN("  Pin: ", this->pin_);
 #endif
-#endif  // USE_ESP8266
+#endif  // USE_ESP8266 || USE_LIBRETINY
 
 #ifdef USE_ESP32
-  LOG_PIN("  Pin: ", pin_);
-  if (autorange_) {
-    ESP_LOGCONFIG(TAG, " Attenuation: auto");
+  LOG_PIN("  Pin: ", this->pin_);
+  if (this->autorange_) {
+    ESP_LOGCONFIG(TAG, "  Attenuation: auto");
   } else {
     switch (this->attenuation_) {
       case ADC_ATTEN_DB_0:
-        ESP_LOGCONFIG(TAG, " Attenuation: 0db");
+        ESP_LOGCONFIG(TAG, "  Attenuation: 0db");
         break;
       case ADC_ATTEN_DB_2_5:
-        ESP_LOGCONFIG(TAG, " Attenuation: 2.5db");
+        ESP_LOGCONFIG(TAG, "  Attenuation: 2.5db");
         break;
       case ADC_ATTEN_DB_6:
-        ESP_LOGCONFIG(TAG, " Attenuation: 6db");
+        ESP_LOGCONFIG(TAG, "  Attenuation: 6db");
         break;
-      case ADC_ATTEN_DB_11:
-        ESP_LOGCONFIG(TAG, " Attenuation: 11db");
+      case ADC_ATTEN_DB_12_COMPAT:
+        ESP_LOGCONFIG(TAG, "  Attenuation: 12db");
         break;
       default:  // This is to satisfy the unused ADC_ATTEN_MAX
         break;
     }
   }
 #endif  // USE_ESP32
+
 #ifdef USE_RP2040
   if (this->is_temperature_) {
     ESP_LOGCONFIG(TAG, "  Pin: Temperature");
   } else {
-    LOG_PIN("  Pin: ", pin_);
+#ifdef USE_ADC_SENSOR_VCC
+    ESP_LOGCONFIG(TAG, "  Pin: VCC");
+#else
+    LOG_PIN("  Pin: ", this->pin_);
+#endif  // USE_ADC_SENSOR_VCC
   }
-#endif
+#endif  // USE_RP2040
+  ESP_LOGCONFIG(TAG, "  Samples: %i", this->sample_count_);
   LOG_UPDATE_INTERVAL(this);
 }
 
@@ -140,14 +149,24 @@ void ADCSensor::update() {
   this->publish_state(value_v);
 }
 
+void ADCSensor::set_sample_count(uint8_t sample_count) {
+  if (sample_count != 0) {
+    this->sample_count_ = sample_count;
+  }
+}
+
 #ifdef USE_ESP8266
 float ADCSensor::sample() {
+  uint32_t raw = 0;
+  for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
 #ifdef USE_ADC_SENSOR_VCC
-  int32_t raw = ESP.getVcc();  // NOLINT(readability-static-accessed-through-instance)
+    raw += ESP.getVcc();  // NOLINT(readability-static-accessed-through-instance)
 #else
-  int32_t raw = analogRead(this->pin_->get_pin());  // NOLINT
+    raw += analogRead(this->pin_->get_pin());  // NOLINT
 #endif
-  if (output_raw_) {
+  }
+  raw = (raw + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+  if (this->output_raw_) {
     return raw;
   }
   return raw / 1024.0f;
@@ -156,77 +175,81 @@ float ADCSensor::sample() {
 
 #ifdef USE_ESP32
 float ADCSensor::sample() {
-  if (!autorange_) {
-    int raw = -1;
-    if (channel1_ != ADC1_CHANNEL_MAX) {
-      raw = adc1_get_raw(channel1_);
-    } else if (channel2_ != ADC2_CHANNEL_MAX) {
-      adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw);
+  if (!this->autorange_) {
+    uint32_t sum = 0;
+    for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
+      int raw = -1;
+      if (this->channel1_ != ADC1_CHANNEL_MAX) {
+        raw = adc1_get_raw(this->channel1_);
+      } else if (this->channel2_ != ADC2_CHANNEL_MAX) {
+        adc2_get_raw(this->channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw);
+      }
+      if (raw == -1) {
+        return NAN;
+      }
+      sum += raw;
     }
-
-    if (raw == -1) {
-      return NAN;
+    sum = (sum + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+    if (this->output_raw_) {
+      return sum;
     }
-    if (output_raw_) {
-      return raw;
-    }
-    uint32_t mv = esp_adc_cal_raw_to_voltage(raw, &cal_characteristics_[(int32_t) attenuation_]);
+    uint32_t mv = esp_adc_cal_raw_to_voltage(sum, &this->cal_characteristics_[(int32_t) this->attenuation_]);
     return mv / 1000.0f;
   }
 
-  int raw11 = ADC_MAX, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
+  int raw12 = ADC_MAX, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
 
-  if (channel1_ != ADC1_CHANNEL_MAX) {
-    adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_11);
-    raw11 = adc1_get_raw(channel1_);
-    if (raw11 < ADC_MAX) {
-      adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_6);
-      raw6 = adc1_get_raw(channel1_);
+  if (this->channel1_ != ADC1_CHANNEL_MAX) {
+    adc1_config_channel_atten(this->channel1_, ADC_ATTEN_DB_12_COMPAT);
+    raw12 = adc1_get_raw(this->channel1_);
+    if (raw12 < ADC_MAX) {
+      adc1_config_channel_atten(this->channel1_, ADC_ATTEN_DB_6);
+      raw6 = adc1_get_raw(this->channel1_);
       if (raw6 < ADC_MAX) {
-        adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_2_5);
-        raw2 = adc1_get_raw(channel1_);
+        adc1_config_channel_atten(this->channel1_, ADC_ATTEN_DB_2_5);
+        raw2 = adc1_get_raw(this->channel1_);
         if (raw2 < ADC_MAX) {
-          adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_0);
-          raw0 = adc1_get_raw(channel1_);
+          adc1_config_channel_atten(this->channel1_, ADC_ATTEN_DB_0);
+          raw0 = adc1_get_raw(this->channel1_);
         }
       }
     }
-  } else if (channel2_ != ADC2_CHANNEL_MAX) {
-    adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_11);
-    adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw11);
-    if (raw11 < ADC_MAX) {
-      adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_6);
-      adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw6);
+  } else if (this->channel2_ != ADC2_CHANNEL_MAX) {
+    adc2_config_channel_atten(this->channel2_, ADC_ATTEN_DB_12_COMPAT);
+    adc2_get_raw(this->channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw12);
+    if (raw12 < ADC_MAX) {
+      adc2_config_channel_atten(this->channel2_, ADC_ATTEN_DB_6);
+      adc2_get_raw(this->channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw6);
       if (raw6 < ADC_MAX) {
-        adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_2_5);
-        adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw2);
+        adc2_config_channel_atten(this->channel2_, ADC_ATTEN_DB_2_5);
+        adc2_get_raw(this->channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw2);
         if (raw2 < ADC_MAX) {
-          adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_0);
-          adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw0);
+          adc2_config_channel_atten(this->channel2_, ADC_ATTEN_DB_0);
+          adc2_get_raw(this->channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw0);
         }
       }
     }
   }
 
-  if (raw0 == -1 || raw2 == -1 || raw6 == -1 || raw11 == -1) {
+  if (raw0 == -1 || raw2 == -1 || raw6 == -1 || raw12 == -1) {
     return NAN;
   }
 
-  uint32_t mv11 = esp_adc_cal_raw_to_voltage(raw11, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_11]);
-  uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_6]);
-  uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_2_5]);
-  uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_0]);
+  uint32_t mv12 = esp_adc_cal_raw_to_voltage(raw12, &this->cal_characteristics_[(int32_t) ADC_ATTEN_DB_12_COMPAT]);
+  uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &this->cal_characteristics_[(int32_t) ADC_ATTEN_DB_6]);
+  uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &this->cal_characteristics_[(int32_t) ADC_ATTEN_DB_2_5]);
+  uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &this->cal_characteristics_[(int32_t) ADC_ATTEN_DB_0]);
 
   // Contribution of each value, in range 0-2048 (12 bit ADC) or 0-4096 (13 bit ADC)
-  uint32_t c11 = std::min(raw11, ADC_HALF);
+  uint32_t c12 = std::min(raw12, ADC_HALF);
   uint32_t c6 = ADC_HALF - std::abs(raw6 - ADC_HALF);
   uint32_t c2 = ADC_HALF - std::abs(raw2 - ADC_HALF);
   uint32_t c0 = std::min(ADC_MAX - raw0, ADC_HALF);
   // max theoretical csum value is 4096*4 = 16384
-  uint32_t csum = c11 + c6 + c2 + c0;
+  uint32_t csum = c12 + c6 + c2 + c0;
 
   // each mv is max 3900; so max value is 3900*4096*4, fits in unsigned32
-  uint32_t mv_scaled = (mv11 * c11) + (mv6 * c6) + (mv2 * c2) + (mv0 * c0);
+  uint32_t mv_scaled = (mv12 * c12) + (mv6 * c6) + (mv2 * c2) + (mv0 * c0);
   return mv_scaled / (float) (csum * 1000U);
 }
 #endif  // USE_ESP32
@@ -237,23 +260,70 @@ float ADCSensor::sample() {
     adc_set_temp_sensor_enabled(true);
     delay(1);
     adc_select_input(4);
+    uint32_t raw = 0;
+    for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
+      raw += adc_read();
+    }
+    raw = (raw + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+    adc_set_temp_sensor_enabled(false);
+    if (this->output_raw_) {
+      return raw;
+    }
+    return raw * 3.3f / 4096.0f;
   } else {
     uint8_t pin = this->pin_->get_pin();
+#ifdef CYW43_USES_VSYS_PIN
+    if (pin == PICO_VSYS_PIN) {
+      // Measuring VSYS on Raspberry Pico W needs to be wrapped with
+      // `cyw43_thread_enter()`/`cyw43_thread_exit()` as discussed in
+      // https://github.com/raspberrypi/pico-sdk/issues/1222, since Wifi chip and
+      // VSYS ADC both share GPIO29
+      cyw43_thread_enter();
+    }
+#endif  // CYW43_USES_VSYS_PIN
+
     adc_gpio_init(pin);
     adc_select_input(pin - 26);
-  }
 
-  int32_t raw = adc_read();
-  if (this->is_temperature_) {
-    adc_set_temp_sensor_enabled(false);
+    uint32_t raw = 0;
+    for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
+      raw += adc_read();
+    }
+    raw = (raw + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+
+#ifdef CYW43_USES_VSYS_PIN
+    if (pin == PICO_VSYS_PIN) {
+      cyw43_thread_exit();
+    }
+#endif  // CYW43_USES_VSYS_PIN
+
+    if (this->output_raw_) {
+      return raw;
+    }
+    float coeff = pin == PICO_VSYS_PIN ? 3.0 : 1.0;
+    return raw * 3.3f / 4096.0f * coeff;
   }
-  if (output_raw_) {
-    return raw;
-  }
-  return raw * 3.3f / 4096.0f;
 }
 #endif
 
+#ifdef USE_LIBRETINY
+float ADCSensor::sample() {
+  uint32_t raw = 0;
+  if (this->output_raw_) {
+    for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
+      raw += analogRead(this->pin_->get_pin());  // NOLINT
+    }
+    raw = (raw + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+    return raw;
+  }
+  for (uint8_t sample = 0; sample < this->sample_count_; sample++) {
+    raw += analogReadVoltage(this->pin_->get_pin());  // NOLINT
+  }
+  raw = (raw + (this->sample_count_ >> 1)) / this->sample_count_;  // NOLINT(clang-analyzer-core.DivideZero)
+  return raw / 1000.0f;
+}
+#endif  // USE_LIBRETINY
+
 #ifdef USE_ESP8266
 std::string ADCSensor::unique_id() { return get_mac_address() + "-adc"; }
 #endif

esphome/components/adc/adc_sensor.h

@@ -1,33 +1,48 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/defines.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
 
 #ifdef USE_ESP32
-#include "driver/adc.h"
 #include <esp_adc_cal.h>
+#include "driver/adc.h"
 #endif
 
 namespace esphome {
 namespace adc {
 
+#ifdef USE_ESP32
+// clang-format off
+#if (ESP_IDF_VERSION_MAJOR == 4 && ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 7)) || \
+    (ESP_IDF_VERSION_MAJOR == 5 && \
+     ((ESP_IDF_VERSION_MINOR == 0 && ESP_IDF_VERSION_PATCH >= 5) || \
+      (ESP_IDF_VERSION_MINOR == 1 && ESP_IDF_VERSION_PATCH >= 3) || \
+      (ESP_IDF_VERSION_MINOR >= 2)) \
+    )
+// clang-format on
+static const adc_atten_t ADC_ATTEN_DB_12_COMPAT = ADC_ATTEN_DB_12;
+#else
+static const adc_atten_t ADC_ATTEN_DB_12_COMPAT = ADC_ATTEN_DB_11;
+#endif
+#endif  // USE_ESP32
+
 class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
  public:
 #ifdef USE_ESP32
   /// Set the attenuation for this pin. Only available on the ESP32.
-  void set_attenuation(adc_atten_t attenuation) { attenuation_ = attenuation; }
+  void set_attenuation(adc_atten_t attenuation) { this->attenuation_ = attenuation; }
   void set_channel1(adc1_channel_t channel) {
-    channel1_ = channel;
-    channel2_ = ADC2_CHANNEL_MAX;
+    this->channel1_ = channel;
+    this->channel2_ = ADC2_CHANNEL_MAX;
   }
   void set_channel2(adc2_channel_t channel) {
-    channel2_ = channel;
-    channel1_ = ADC1_CHANNEL_MAX;
+    this->channel2_ = channel;
+    this->channel1_ = ADC1_CHANNEL_MAX;
   }
-  void set_autorange(bool autorange) { autorange_ = autorange; }
+  void set_autorange(bool autorange) { this->autorange_ = autorange; }
 #endif
 
   /// Update ADC values
@@ -38,7 +53,8 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   /// `HARDWARE_LATE` setup priority
   float get_setup_priority() const override;
   void set_pin(InternalGPIOPin *pin) { this->pin_ = pin; }
-  void set_output_raw(bool output_raw) { output_raw_ = output_raw; }
+  void set_output_raw(bool output_raw) { this->output_raw_ = output_raw; }
+  void set_sample_count(uint8_t sample_count);
   float sample() override;
 
 #ifdef USE_ESP8266
@@ -46,12 +62,13 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
 #endif
 
 #ifdef USE_RP2040
-  void set_is_temperature() { is_temperature_ = true; }
+  void set_is_temperature() { this->is_temperature_ = true; }
 #endif
 
  protected:
   InternalGPIOPin *pin_;
   bool output_raw_{false};
+  uint8_t sample_count_{1};
 
 #ifdef USE_RP2040
   bool is_temperature_{false};
@@ -62,8 +79,12 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   adc1_channel_t channel1_{ADC1_CHANNEL_MAX};
   adc2_channel_t channel2_{ADC2_CHANNEL_MAX};
   bool autorange_{false};
+#if ESP_IDF_VERSION_MAJOR >= 5
+  esp_adc_cal_characteristics_t cal_characteristics_[SOC_ADC_ATTEN_NUM] = {};
+#else
   esp_adc_cal_characteristics_t cal_characteristics_[ADC_ATTEN_MAX] = {};
 #endif
+#endif
 };
 
 }  // namespace adc

esphome/components/adc/sensor.py

@@ -1,3 +1,5 @@
+import logging
+
 import esphome.codegen as cg
 import esphome.config_validation as cv
 import esphome.final_validate as fv
@@ -19,16 +21,35 @@ from . import (
     ATTENUATION_MODES,
     ESP32_VARIANT_ADC1_PIN_TO_CHANNEL,
     ESP32_VARIANT_ADC2_PIN_TO_CHANNEL,
+    adc_ns,
     validate_adc_pin,
 )
 
+_LOGGER = logging.getLogger(__name__)
+
 AUTO_LOAD = ["voltage_sampler"]
 
+CONF_SAMPLES = "samples"
+
+
+_attenuation = cv.enum(ATTENUATION_MODES, lower=True)
+
 
 def validate_config(config):
     if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
         raise cv.Invalid("Automatic attenuation cannot be used when raw output is set")
 
+    if config.get(CONF_ATTENUATION, None) == "auto" and config.get(CONF_SAMPLES, 1) > 1:
+        raise cv.Invalid(
+            "Automatic attenuation cannot be used when multisampling is set"
+        )
+    if config.get(CONF_ATTENUATION) == "11db":
+        _LOGGER.warning(
+            "`attenuation: 11db` is deprecated, use `attenuation: 12db` instead"
+        )
+        # Alter value here so `config` command prints the recommended change
+        config[CONF_ATTENUATION] = _attenuation("12db")
+
     return config
 
 
@@ -47,7 +68,6 @@ def final_validate_config(config):
     return config
 
 
-adc_ns = cg.esphome_ns.namespace("adc")
 ADCSensor = adc_ns.class_(
     "ADCSensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
@@ -65,8 +85,9 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_PIN): validate_adc_pin,
             cv.Optional(CONF_RAW, default=False): cv.boolean,
             cv.SplitDefault(CONF_ATTENUATION, esp32="0db"): cv.All(
-                cv.only_on_esp32, cv.enum(ATTENUATION_MODES, lower=True)
+                cv.only_on_esp32, _attenuation
             ),
+            cv.Optional(CONF_SAMPLES, default=1): cv.int_range(min=1, max=255),
         }
     )
     .extend(cv.polling_component_schema("60s")),
@@ -90,6 +111,7 @@ async def to_code(config):
         cg.add(var.set_pin(pin))
 
     cg.add(var.set_output_raw(config[CONF_RAW]))
+    cg.add(var.set_sample_count(config[CONF_SAMPLES]))
 
     if attenuation := config.get(CONF_ATTENUATION):
         if attenuation == "auto":

esphome/components/addressable_light/addressable_light_display.h

@@ -10,7 +10,7 @@
 namespace esphome {
 namespace addressable_light {
 
-class AddressableLightDisplay : public display::DisplayBuffer, public PollingComponent {
+class AddressableLightDisplay : public display::DisplayBuffer {
  public:
   light::AddressableLight *get_light() const { return this->light_; }
 

esphome/components/addressable_light/display.py

@@ -45,7 +45,6 @@ async def to_code(config):
     cg.add(var.set_height(config[CONF_HEIGHT]))
     cg.add(var.set_light(wrapped_light))
 
-    await cg.register_component(var, config)
     await display.register_display(var, config)
 
     if pixel_mapper := config.get(CONF_PIXEL_MAPPER):

esphome/components/ade7880/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@kpfleming"]

esphome/components/ade7880/ade7880.cpp

@@ -0,0 +1,304 @@
+// This component was developed using knowledge gathered by a number
+// of people who reverse-engineered the Shelly 3EM:
+//
+// @AndreKR on GitHub
+// Axel (@Axel830 on GitHub)
+// Marko (@goodkiller on GitHub)
+// Michaël Piron (@michaelpiron on GitHub)
+// Theo Arends (@arendst on GitHub)
+
+#include "ade7880.h"
+#include "ade7880_registers.h"
+#include "esphome/core/log.h"
+
+#include <cinttypes>
+
+namespace esphome {
+namespace ade7880 {
+
+static const char *const TAG = "ade7880";
+
+void IRAM_ATTR ADE7880Store::gpio_intr(ADE7880Store *arg) { arg->reset_done = true; }
+
+void ADE7880::setup() {
+  if (this->irq0_pin_ != nullptr) {
+    this->irq0_pin_->setup();
+  }
+  this->irq1_pin_->setup();
+  if (this->reset_pin_ != nullptr) {
+    this->reset_pin_->setup();
+  }
+  this->store_.irq1_pin = this->irq1_pin_->to_isr();
+  this->irq1_pin_->attach_interrupt(ADE7880Store::gpio_intr, &this->store_, gpio::INTERRUPT_FALLING_EDGE);
+
+  // if IRQ1 is already asserted, the cause must be determined
+  if (this->irq1_pin_->digital_read() == 0) {
+    ESP_LOGD(TAG, "IRQ1 found asserted during setup()");
+    auto status1 = read_u32_register16_(STATUS1);
+    if ((status1 & ~STATUS1_RSTDONE) != 0) {
+      // not safe to proceed, must initiate reset
+      ESP_LOGD(TAG, "IRQ1 asserted for !RSTDONE, resetting device");
+      this->reset_device_();
+      return;
+    }
+    if ((status1 & STATUS1_RSTDONE) == STATUS1_RSTDONE) {
+      // safe to proceed, device has just completed reset cycle
+      ESP_LOGD(TAG, "Acknowledging RSTDONE");
+      this->write_u32_register16_(STATUS0, 0xFFFF);
+      this->write_u32_register16_(STATUS1, 0xFFFF);
+      this->init_device_();
+      return;
+    }
+  }
+
+  this->reset_device_();
+}
+
+void ADE7880::loop() {
+  // check for completion of a reset cycle
+  if (!this->store_.reset_done) {
+    return;
+  }
+
+  ESP_LOGD(TAG, "Acknowledging RSTDONE");
+  this->write_u32_register16_(STATUS0, 0xFFFF);
+  this->write_u32_register16_(STATUS1, 0xFFFF);
+  this->init_device_();
+  this->store_.reset_done = false;
+  this->store_.reset_pending = false;
+}
+
+template<typename F>
+void ADE7880::update_sensor_from_s24zp_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
+  if (sensor == nullptr) {
+    return;
+  }
+
+  float val = this->read_s24zp_register16_(a_register);
+  sensor->publish_state(f(val));
+}
+
+template<typename F>
+void ADE7880::update_sensor_from_s16_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
+  if (sensor == nullptr) {
+    return;
+  }
+
+  float val = this->read_s16_register16_(a_register);
+  sensor->publish_state(f(val));
+}
+
+template<typename F>
+void ADE7880::update_sensor_from_s32_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f) {
+  if (sensor == nullptr) {
+    return;
+  }
+
+  float val = this->read_s32_register16_(a_register);
+  sensor->publish_state(f(val));
+}
+
+void ADE7880::update() {
+  if (this->store_.reset_pending) {
+    return;
+  }
+
+  auto start = millis();
+
+  if (this->channel_n_ != nullptr) {
+    auto *chan = this->channel_n_;
+    this->update_sensor_from_s24zp_register16_(chan->current, NIRMS, [](float val) { return val / 100000.0f; });
+  }
+
+  if (this->channel_a_ != nullptr) {
+    auto *chan = this->channel_a_;
+    this->update_sensor_from_s24zp_register16_(chan->current, AIRMS, [](float val) { return val / 100000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->voltage, BVRMS, [](float val) { return val / 10000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->active_power, AWATT, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->apparent_power, AVA, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s16_register16_(chan->power_factor, APF,
+                                             [](float val) { return std::abs(val / -327.68f); });
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, AFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, AFWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
+  }
+
+  if (this->channel_b_ != nullptr) {
+    auto *chan = this->channel_b_;
+    this->update_sensor_from_s24zp_register16_(chan->current, BIRMS, [](float val) { return val / 100000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->voltage, BVRMS, [](float val) { return val / 10000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->active_power, BWATT, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->apparent_power, BVA, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s16_register16_(chan->power_factor, BPF,
+                                             [](float val) { return std::abs(val / -327.68f); });
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, BFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, BFWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
+  }
+
+  if (this->channel_c_ != nullptr) {
+    auto *chan = this->channel_c_;
+    this->update_sensor_from_s24zp_register16_(chan->current, CIRMS, [](float val) { return val / 100000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->voltage, CVRMS, [](float val) { return val / 10000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->active_power, CWATT, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->apparent_power, CVA, [](float val) { return val / 100.0f; });
+    this->update_sensor_from_s16_register16_(chan->power_factor, CPF,
+                                             [](float val) { return std::abs(val / -327.68f); });
+    this->update_sensor_from_s32_register16_(chan->forward_active_energy, CFWATTHR, [&chan](float val) {
+      return chan->forward_active_energy_total += val / 14400.0f;
+    });
+    this->update_sensor_from_s32_register16_(chan->reverse_active_energy, CFWATTHR, [&chan](float val) {
+      return chan->reverse_active_energy_total += val / 14400.0f;
+    });
+  }
+
+  ESP_LOGD(TAG, "update took %" PRIu32 " ms", millis() - start);
+}
+
+void ADE7880::dump_config() {
+  ESP_LOGCONFIG(TAG, "ADE7880:");
+  LOG_PIN("  IRQ0  Pin: ", this->irq0_pin_);
+  LOG_PIN("  IRQ1  Pin: ", this->irq1_pin_);
+  LOG_PIN("  RESET Pin: ", this->reset_pin_);
+  ESP_LOGCONFIG(TAG, "  Frequency: %.0f Hz", this->frequency_);
+
+  if (this->channel_a_ != nullptr) {
+    ESP_LOGCONFIG(TAG, "  Phase A:");
+    LOG_SENSOR("    ", "Current", this->channel_a_->current);
+    LOG_SENSOR("    ", "Voltage", this->channel_a_->voltage);
+    LOG_SENSOR("    ", "Active Power", this->channel_a_->active_power);
+    LOG_SENSOR("    ", "Apparent Power", this->channel_a_->apparent_power);
+    LOG_SENSOR("    ", "Power Factor", this->channel_a_->power_factor);
+    LOG_SENSOR("    ", "Forward Active Energy", this->channel_a_->forward_active_energy);
+    LOG_SENSOR("    ", "Reverse Active Energy", this->channel_a_->reverse_active_energy);
+    ESP_LOGCONFIG(TAG, "    Calibration:");
+    ESP_LOGCONFIG(TAG, "     Current: %" PRId32, this->channel_a_->current_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Voltage: %" PRId32, this->channel_a_->voltage_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Power: %" PRId32, this->channel_a_->power_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Phase Angle: %u", this->channel_a_->phase_angle_calibration);
+  }
+
+  if (this->channel_b_ != nullptr) {
+    ESP_LOGCONFIG(TAG, "  Phase B:");
+    LOG_SENSOR("    ", "Current", this->channel_b_->current);
+    LOG_SENSOR("    ", "Voltage", this->channel_b_->voltage);
+    LOG_SENSOR("    ", "Active Power", this->channel_b_->active_power);
+    LOG_SENSOR("    ", "Apparent Power", this->channel_b_->apparent_power);
+    LOG_SENSOR("    ", "Power Factor", this->channel_b_->power_factor);
+    LOG_SENSOR("    ", "Forward Active Energy", this->channel_b_->forward_active_energy);
+    LOG_SENSOR("    ", "Reverse Active Energy", this->channel_b_->reverse_active_energy);
+    ESP_LOGCONFIG(TAG, "    Calibration:");
+    ESP_LOGCONFIG(TAG, "     Current: %" PRId32, this->channel_b_->current_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Voltage: %" PRId32, this->channel_b_->voltage_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Power: %" PRId32, this->channel_b_->power_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Phase Angle: %u", this->channel_b_->phase_angle_calibration);
+  }
+
+  if (this->channel_c_ != nullptr) {
+    ESP_LOGCONFIG(TAG, "  Phase C:");
+    LOG_SENSOR("    ", "Current", this->channel_c_->current);
+    LOG_SENSOR("    ", "Voltage", this->channel_c_->voltage);
+    LOG_SENSOR("    ", "Active Power", this->channel_c_->active_power);
+    LOG_SENSOR("    ", "Apparent Power", this->channel_c_->apparent_power);
+    LOG_SENSOR("    ", "Power Factor", this->channel_c_->power_factor);
+    LOG_SENSOR("    ", "Forward Active Energy", this->channel_c_->forward_active_energy);
+    LOG_SENSOR("    ", "Reverse Active Energy", this->channel_c_->reverse_active_energy);
+    ESP_LOGCONFIG(TAG, "    Calibration:");
+    ESP_LOGCONFIG(TAG, "     Current: %" PRId32, this->channel_c_->current_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Voltage: %" PRId32, this->channel_c_->voltage_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Power: %" PRId32, this->channel_c_->power_gain_calibration);
+    ESP_LOGCONFIG(TAG, "     Phase Angle: %u", this->channel_c_->phase_angle_calibration);
+  }
+
+  if (this->channel_n_ != nullptr) {
+    ESP_LOGCONFIG(TAG, "  Neutral:");
+    LOG_SENSOR("    ", "Current", this->channel_n_->current);
+    ESP_LOGCONFIG(TAG, "    Calibration:");
+    ESP_LOGCONFIG(TAG, "     Current: %" PRId32, this->channel_n_->current_gain_calibration);
+  }
+
+  LOG_I2C_DEVICE(this);
+  LOG_UPDATE_INTERVAL(this);
+}
+
+void ADE7880::calibrate_s10zp_reading_(uint16_t a_register, int16_t calibration) {
+  if (calibration == 0) {
+    return;
+  }
+
+  this->write_s10zp_register16_(a_register, calibration);
+}
+
+void ADE7880::calibrate_s24zpse_reading_(uint16_t a_register, int32_t calibration) {
+  if (calibration == 0) {
+    return;
+  }
+
+  this->write_s24zpse_register16_(a_register, calibration);
+}
+
+void ADE7880::init_device_() {
+  this->write_u8_register16_(CONFIG2, CONFIG2_I2C_LOCK);
+
+  this->write_u16_register16_(GAIN, 0);
+
+  if (this->frequency_ > 55) {
+    this->write_u16_register16_(COMPMODE, COMPMODE_DEFAULT | COMPMODE_SELFREQ);
+  }
+
+  if (this->channel_n_ != nullptr) {
+    this->calibrate_s24zpse_reading_(NIGAIN, this->channel_n_->current_gain_calibration);
+  }
+
+  if (this->channel_a_ != nullptr) {
+    this->calibrate_s24zpse_reading_(AIGAIN, this->channel_a_->current_gain_calibration);
+    this->calibrate_s24zpse_reading_(AVGAIN, this->channel_a_->voltage_gain_calibration);
+    this->calibrate_s24zpse_reading_(APGAIN, this->channel_a_->power_gain_calibration);
+    this->calibrate_s10zp_reading_(APHCAL, this->channel_a_->phase_angle_calibration);
+  }
+
+  if (this->channel_b_ != nullptr) {
+    this->calibrate_s24zpse_reading_(BIGAIN, this->channel_b_->current_gain_calibration);
+    this->calibrate_s24zpse_reading_(BVGAIN, this->channel_b_->voltage_gain_calibration);
+    this->calibrate_s24zpse_reading_(BPGAIN, this->channel_b_->power_gain_calibration);
+    this->calibrate_s10zp_reading_(BPHCAL, this->channel_b_->phase_angle_calibration);
+  }
+
+  if (this->channel_c_ != nullptr) {
+    this->calibrate_s24zpse_reading_(CIGAIN, this->channel_c_->current_gain_calibration);
+    this->calibrate_s24zpse_reading_(CVGAIN, this->channel_c_->voltage_gain_calibration);
+    this->calibrate_s24zpse_reading_(CPGAIN, this->channel_c_->power_gain_calibration);
+    this->calibrate_s10zp_reading_(CPHCAL, this->channel_c_->phase_angle_calibration);
+  }
+
+  // write three default values to data memory RAM to flush the I2C write queue
+  this->write_s32_register16_(VLEVEL, 0);
+  this->write_s32_register16_(VLEVEL, 0);
+  this->write_s32_register16_(VLEVEL, 0);
+
+  this->write_u8_register16_(DSPWP_SEL, DSPWP_SEL_SET);
+  this->write_u8_register16_(DSPWP_SET, DSPWP_SET_RO);
+  this->write_u16_register16_(RUN, RUN_ENABLE);
+}
+
+void ADE7880::reset_device_() {
+  if (this->reset_pin_ != nullptr) {
+    ESP_LOGD(TAG, "Reset device using RESET pin");
+    this->reset_pin_->digital_write(false);
+    delay(1);
+    this->reset_pin_->digital_write(true);
+  } else {
+    ESP_LOGD(TAG, "Reset device using SWRST command");
+    this->write_u16_register16_(CONFIG, CONFIG_SWRST);
+  }
+  this->store_.reset_pending = true;
+}
+
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880.h

@@ -0,0 +1,131 @@
+#pragma once
+
+// This component was developed using knowledge gathered by a number
+// of people who reverse-engineered the Shelly 3EM:
+//
+// @AndreKR on GitHub
+// Axel (@Axel830 on GitHub)
+// Marko (@goodkiller on GitHub)
+// Michaël Piron (@michaelpiron on GitHub)
+// Theo Arends (@arendst on GitHub)
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
+
+#include "ade7880_registers.h"
+
+namespace esphome {
+namespace ade7880 {
+
+struct NeutralChannel {
+  void set_current(sensor::Sensor *sens) { this->current = sens; }
+
+  void set_current_gain_calibration(int32_t val) { this->current_gain_calibration = val; }
+
+  sensor::Sensor *current{nullptr};
+  int32_t current_gain_calibration{0};
+};
+
+struct PowerChannel {
+  void set_current(sensor::Sensor *sens) { this->current = sens; }
+  void set_voltage(sensor::Sensor *sens) { this->voltage = sens; }
+  void set_active_power(sensor::Sensor *sens) { this->active_power = sens; }
+  void set_apparent_power(sensor::Sensor *sens) { this->apparent_power = sens; }
+  void set_power_factor(sensor::Sensor *sens) { this->power_factor = sens; }
+  void set_forward_active_energy(sensor::Sensor *sens) { this->forward_active_energy = sens; }
+  void set_reverse_active_energy(sensor::Sensor *sens) { this->reverse_active_energy = sens; }
+
+  void set_current_gain_calibration(int32_t val) { this->current_gain_calibration = val; }
+  void set_voltage_gain_calibration(int32_t val) { this->voltage_gain_calibration = val; }
+  void set_power_gain_calibration(int32_t val) { this->power_gain_calibration = val; }
+  void set_phase_angle_calibration(int32_t val) { this->phase_angle_calibration = val; }
+
+  sensor::Sensor *current{nullptr};
+  sensor::Sensor *voltage{nullptr};
+  sensor::Sensor *active_power{nullptr};
+  sensor::Sensor *apparent_power{nullptr};
+  sensor::Sensor *power_factor{nullptr};
+  sensor::Sensor *forward_active_energy{nullptr};
+  sensor::Sensor *reverse_active_energy{nullptr};
+  int32_t current_gain_calibration{0};
+  int32_t voltage_gain_calibration{0};
+  int32_t power_gain_calibration{0};
+  uint16_t phase_angle_calibration{0};
+  float forward_active_energy_total{0};
+  float reverse_active_energy_total{0};
+};
+
+// Store data in a class that doesn't use multiple-inheritance (no vtables in flash!)
+struct ADE7880Store {
+  volatile bool reset_done{false};
+  bool reset_pending{false};
+  ISRInternalGPIOPin irq1_pin;
+
+  static void gpio_intr(ADE7880Store *arg);
+};
+
+class ADE7880 : public i2c::I2CDevice, public PollingComponent {
+ public:
+  void set_irq0_pin(InternalGPIOPin *pin) { this->irq0_pin_ = pin; }
+  void set_irq1_pin(InternalGPIOPin *pin) { this->irq1_pin_ = pin; }
+  void set_reset_pin(InternalGPIOPin *pin) { this->reset_pin_ = pin; }
+  void set_frequency(float frequency) { this->frequency_ = frequency; }
+  void set_channel_n(NeutralChannel *channel) { this->channel_n_ = channel; }
+  void set_channel_a(PowerChannel *channel) { this->channel_a_ = channel; }
+  void set_channel_b(PowerChannel *channel) { this->channel_b_ = channel; }
+  void set_channel_c(PowerChannel *channel) { this->channel_c_ = channel; }
+
+  void setup() override;
+
+  void loop() override;
+
+  void update() override;
+
+  void dump_config() override;
+
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+ protected:
+  ADE7880Store store_{};
+  InternalGPIOPin *irq0_pin_{nullptr};
+  InternalGPIOPin *irq1_pin_{nullptr};
+  InternalGPIOPin *reset_pin_{nullptr};
+  float frequency_;
+  NeutralChannel *channel_n_{nullptr};
+  PowerChannel *channel_a_{nullptr};
+  PowerChannel *channel_b_{nullptr};
+  PowerChannel *channel_c_{nullptr};
+
+  void calibrate_s10zp_reading_(uint16_t a_register, int16_t calibration);
+  void calibrate_s24zpse_reading_(uint16_t a_register, int32_t calibration);
+
+  void init_device_();
+
+  // each of these functions allow the caller to pass in a lambda (or any other callable)
+  // which modifies the value read from the register before it is passed to the sensor
+  // the callable will be passed a 'float' value and is expected to return a 'float'
+  template<typename F> void update_sensor_from_s24zp_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
+  template<typename F> void update_sensor_from_s16_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
+  template<typename F> void update_sensor_from_s32_register16_(sensor::Sensor *sensor, uint16_t a_register, F &&f);
+
+  void reset_device_();
+
+  uint8_t read_u8_register16_(uint16_t a_register);
+  int16_t read_s16_register16_(uint16_t a_register);
+  uint16_t read_u16_register16_(uint16_t a_register);
+  int32_t read_s24zp_register16_(uint16_t a_register);
+  int32_t read_s32_register16_(uint16_t a_register);
+  uint32_t read_u32_register16_(uint16_t a_register);
+
+  void write_u8_register16_(uint16_t a_register, uint8_t value);
+  void write_s10zp_register16_(uint16_t a_register, int16_t value);
+  void write_u16_register16_(uint16_t a_register, uint16_t value);
+  void write_s24zpse_register16_(uint16_t a_register, int32_t value);
+  void write_s32_register16_(uint16_t a_register, int32_t value);
+  void write_u32_register16_(uint16_t a_register, uint32_t value);
+};
+
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880_i2c.cpp

@@ -0,0 +1,101 @@
+// This component was developed using knowledge gathered by a number
+// of people who reverse-engineered the Shelly 3EM:
+//
+// @AndreKR on GitHub
+// Axel (@Axel830 on GitHub)
+// Marko (@goodkiller on GitHub)
+// Michaël Piron (@michaelpiron on GitHub)
+// Theo Arends (@arendst on GitHub)
+
+#include "ade7880.h"
+
+namespace esphome {
+namespace ade7880 {
+
+// adapted from https://stackoverflow.com/a/55912127/1886371
+template<size_t Bits, typename T> inline T sign_extend(const T &v) noexcept {
+  using S = struct { signed Val : Bits; };
+  return reinterpret_cast<const S *>(&v)->Val;
+}
+
+// Register types
+// unsigned 8-bit (uint8_t)
+// signed 10-bit - 16-bit ZP on wire (int16_t, needs sign extension)
+// unsigned 16-bit (uint16_t)
+// unsigned 20-bit - 32-bit ZP on wire (uint32_t)
+// signed 24-bit - 32-bit ZPSE on wire (int32_t, needs sign extension)
+// signed 24-bit - 32-bit ZP on wire (int32_t, needs sign extension)
+// signed 24-bit - 32-bit SE on wire (int32_t)
+// signed 28-bit - 32-bit ZP on wire (int32_t, needs sign extension)
+// unsigned 32-bit (uint32_t)
+// signed 32-bit (int32_t)
+
+uint8_t ADE7880::read_u8_register16_(uint16_t a_register) {
+  uint8_t in;
+  this->read_register16(a_register, &in, sizeof(in));
+  return in;
+}
+
+int16_t ADE7880::read_s16_register16_(uint16_t a_register) {
+  int16_t in;
+  this->read_register16(a_register, reinterpret_cast<uint8_t *>(&in), sizeof(in));
+  return convert_big_endian(in);
+}
+
+uint16_t ADE7880::read_u16_register16_(uint16_t a_register) {
+  uint16_t in;
+  this->read_register16(a_register, reinterpret_cast<uint8_t *>(&in), sizeof(in));
+  return convert_big_endian(in);
+}
+
+int32_t ADE7880::read_s24zp_register16_(uint16_t a_register) {
+  // s24zp means 24 bit signed value in the lower 24 bits of a 32-bit register
+  int32_t in;
+  this->read_register16(a_register, reinterpret_cast<uint8_t *>(&in), sizeof(in));
+  return sign_extend<24>(convert_big_endian(in));
+}
+
+int32_t ADE7880::read_s32_register16_(uint16_t a_register) {
+  int32_t in;
+  this->read_register16(a_register, reinterpret_cast<uint8_t *>(&in), sizeof(in));
+  return convert_big_endian(in);
+}
+
+uint32_t ADE7880::read_u32_register16_(uint16_t a_register) {
+  uint32_t in;
+  this->read_register16(a_register, reinterpret_cast<uint8_t *>(&in), sizeof(in));
+  return convert_big_endian(in);
+}
+
+void ADE7880::write_u8_register16_(uint16_t a_register, uint8_t value) {
+  this->write_register16(a_register, &value, sizeof(value));
+}
+
+void ADE7880::write_s10zp_register16_(uint16_t a_register, int16_t value) {
+  int16_t out = convert_big_endian(value & 0x03FF);
+  this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
+}
+
+void ADE7880::write_u16_register16_(uint16_t a_register, uint16_t value) {
+  uint16_t out = convert_big_endian(value);
+  this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
+}
+
+void ADE7880::write_s24zpse_register16_(uint16_t a_register, int32_t value) {
+  // s24zpse means a 24-bit signed value, sign-extended to 28 bits, in the lower 28 bits of a 32-bit register
+  int32_t out = convert_big_endian(value & 0x0FFFFFFF);
+  this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
+}
+
+void ADE7880::write_s32_register16_(uint16_t a_register, int32_t value) {
+  int32_t out = convert_big_endian(value);
+  this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
+}
+
+void ADE7880::write_u32_register16_(uint16_t a_register, uint32_t value) {
+  uint32_t out = convert_big_endian(value);
+  this->write_register16(a_register, reinterpret_cast<uint8_t *>(&out), sizeof(out));
+}
+
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/ade7880_registers.h

@@ -0,0 +1,243 @@
+#pragma once
+
+// This file is a modified version of the one created by Michaël Piron (@michaelpiron on GitHub)
+
+// Source: https://www.analog.com/media/en/technical-documentation/application-notes/AN-1127.pdf
+
+namespace esphome {
+namespace ade7880 {
+
+// DSP Data Memory RAM registers
+constexpr uint16_t AIGAIN = 0x4380;
+constexpr uint16_t AVGAIN = 0x4381;
+constexpr uint16_t BIGAIN = 0x4382;
+constexpr uint16_t BVGAIN = 0x4383;
+constexpr uint16_t CIGAIN = 0x4384;
+constexpr uint16_t CVGAIN = 0x4385;
+constexpr uint16_t NIGAIN = 0x4386;
+
+constexpr uint16_t DICOEFF = 0x4388;
+
+constexpr uint16_t APGAIN = 0x4389;
+constexpr uint16_t AWATTOS = 0x438A;
+constexpr uint16_t BPGAIN = 0x438B;
+constexpr uint16_t BWATTOS = 0x438C;
+constexpr uint16_t CPGAIN = 0x438D;
+constexpr uint16_t CWATTOS = 0x438E;
+constexpr uint16_t AIRMSOS = 0x438F;
+constexpr uint16_t AVRMSOS = 0x4390;
+constexpr uint16_t BIRMSOS = 0x4391;
+constexpr uint16_t BVRMSOS = 0x4392;
+constexpr uint16_t CIRMSOS = 0x4393;
+constexpr uint16_t CVRMSOS = 0x4394;
+constexpr uint16_t NIRMSOS = 0x4395;
+constexpr uint16_t HPGAIN = 0x4398;
+constexpr uint16_t ISUMLVL = 0x4399;
+
+constexpr uint16_t VLEVEL = 0x439F;
+
+constexpr uint16_t AFWATTOS = 0x43A2;
+constexpr uint16_t BFWATTOS = 0x43A3;
+constexpr uint16_t CFWATTOS = 0x43A4;
+
+constexpr uint16_t AFVAROS = 0x43A5;
+constexpr uint16_t BFVAROS = 0x43A6;
+constexpr uint16_t CFVAROS = 0x43A7;
+
+constexpr uint16_t AFIRMSOS = 0x43A8;
+constexpr uint16_t BFIRMSOS = 0x43A9;
+constexpr uint16_t CFIRMSOS = 0x43AA;
+
+constexpr uint16_t AFVRMSOS = 0x43AB;
+constexpr uint16_t BFVRMSOS = 0x43AC;
+constexpr uint16_t CFVRMSOS = 0x43AD;
+
+constexpr uint16_t HXWATTOS = 0x43AE;
+constexpr uint16_t HYWATTOS = 0x43AF;
+constexpr uint16_t HZWATTOS = 0x43B0;
+constexpr uint16_t HXVAROS = 0x43B1;
+constexpr uint16_t HYVAROS = 0x43B2;
+constexpr uint16_t HZVAROS = 0x43B3;
+
+constexpr uint16_t HXIRMSOS = 0x43B4;
+constexpr uint16_t HYIRMSOS = 0x43B5;
+constexpr uint16_t HZIRMSOS = 0x43B6;
+constexpr uint16_t HXVRMSOS = 0x43B7;
+constexpr uint16_t HYVRMSOS = 0x43B8;
+constexpr uint16_t HZVRMSOS = 0x43B9;
+
+constexpr uint16_t AIRMS = 0x43C0;
+constexpr uint16_t AVRMS = 0x43C1;
+constexpr uint16_t BIRMS = 0x43C2;
+constexpr uint16_t BVRMS = 0x43C3;
+constexpr uint16_t CIRMS = 0x43C4;
+constexpr uint16_t CVRMS = 0x43C5;
+constexpr uint16_t NIRMS = 0x43C6;
+
+constexpr uint16_t ISUM = 0x43C7;
+
+// Internal DSP Memory RAM registers
+constexpr uint16_t RUN = 0xE228;
+
+constexpr uint16_t AWATTHR = 0xE400;
+constexpr uint16_t BWATTHR = 0xE401;
+constexpr uint16_t CWATTHR = 0xE402;
+constexpr uint16_t AFWATTHR = 0xE403;
+constexpr uint16_t BFWATTHR = 0xE404;
+constexpr uint16_t CFWATTHR = 0xE405;
+constexpr uint16_t AFVARHR = 0xE409;
+constexpr uint16_t BFVARHR = 0xE40A;
+constexpr uint16_t CFVARHR = 0xE40B;
+
+constexpr uint16_t AVAHR = 0xE40C;
+constexpr uint16_t BVAHR = 0xE40D;
+constexpr uint16_t CVAHR = 0xE40E;
+
+constexpr uint16_t IPEAK = 0xE500;
+constexpr uint16_t VPEAK = 0xE501;
+
+constexpr uint16_t STATUS0 = 0xE502;
+constexpr uint16_t STATUS1 = 0xE503;
+
+constexpr uint16_t AIMAV = 0xE504;
+constexpr uint16_t BIMAV = 0xE505;
+constexpr uint16_t CIMAV = 0xE506;
+
+constexpr uint16_t OILVL = 0xE507;
+constexpr uint16_t OVLVL = 0xE508;
+constexpr uint16_t SAGLVL = 0xE509;
+constexpr uint16_t MASK0 = 0xE50A;
+constexpr uint16_t MASK1 = 0xE50B;
+
+constexpr uint16_t IAWV = 0xE50C;
+constexpr uint16_t IBWV = 0xE50D;
+constexpr uint16_t ICWV = 0xE50E;
+constexpr uint16_t INWV = 0xE50F;
+constexpr uint16_t VAWV = 0xE510;
+constexpr uint16_t VBWV = 0xE511;
+constexpr uint16_t VCWV = 0xE512;
+
+constexpr uint16_t AWATT = 0xE513;
+constexpr uint16_t BWATT = 0xE514;
+constexpr uint16_t CWATT = 0xE515;
+
+constexpr uint16_t AFVAR = 0xE516;
+constexpr uint16_t BFVAR = 0xE517;
+constexpr uint16_t CFVAR = 0xE518;
+
+constexpr uint16_t AVA = 0xE519;
+constexpr uint16_t BVA = 0xE51A;
+constexpr uint16_t CVA = 0xE51B;
+
+constexpr uint16_t CHECKSUM = 0xE51F;
+constexpr uint16_t VNOM = 0xE520;
+constexpr uint16_t LAST_RWDATA_24BIT = 0xE5FF;
+constexpr uint16_t PHSTATUS = 0xE600;
+constexpr uint16_t ANGLE0 = 0xE601;
+constexpr uint16_t ANGLE1 = 0xE602;
+constexpr uint16_t ANGLE2 = 0xE603;
+constexpr uint16_t PHNOLOAD = 0xE608;
+constexpr uint16_t LINECYC = 0xE60C;
+constexpr uint16_t ZXTOUT = 0xE60D;
+constexpr uint16_t COMPMODE = 0xE60E;
+constexpr uint16_t GAIN = 0xE60F;
+constexpr uint16_t CFMODE = 0xE610;
+constexpr uint16_t CF1DEN = 0xE611;
+constexpr uint16_t CF2DEN = 0xE612;
+constexpr uint16_t CF3DEN = 0xE613;
+constexpr uint16_t APHCAL = 0xE614;
+constexpr uint16_t BPHCAL = 0xE615;
+constexpr uint16_t CPHCAL = 0xE616;
+constexpr uint16_t PHSIGN = 0xE617;
+constexpr uint16_t CONFIG = 0xE618;
+constexpr uint16_t MMODE = 0xE700;
+constexpr uint16_t ACCMODE = 0xE701;
+constexpr uint16_t LCYCMODE = 0xE702;
+constexpr uint16_t PEAKCYC = 0xE703;
+constexpr uint16_t SAGCYC = 0xE704;
+constexpr uint16_t CFCYC = 0xE705;
+constexpr uint16_t HSDC_CFG = 0xE706;
+constexpr uint16_t VERSION = 0xE707;
+constexpr uint16_t DSPWP_SET = 0xE7E3;
+constexpr uint16_t LAST_RWDATA_8BIT = 0xE7FD;
+constexpr uint16_t DSPWP_SEL = 0xE7FE;
+constexpr uint16_t FVRMS = 0xE880;
+constexpr uint16_t FIRMS = 0xE881;
+constexpr uint16_t FWATT = 0xE882;
+constexpr uint16_t FVAR = 0xE883;
+constexpr uint16_t FVA = 0xE884;
+constexpr uint16_t FPF = 0xE885;
+constexpr uint16_t VTHDN = 0xE886;
+constexpr uint16_t ITHDN = 0xE887;
+constexpr uint16_t HXVRMS = 0xE888;
+constexpr uint16_t HXIRMS = 0xE889;
+constexpr uint16_t HXWATT = 0xE88A;
+constexpr uint16_t HXVAR = 0xE88B;
+constexpr uint16_t HXVA = 0xE88C;
+constexpr uint16_t HXPF = 0xE88D;
+constexpr uint16_t HXVHD = 0xE88E;
+constexpr uint16_t HXIHD = 0xE88F;
+constexpr uint16_t HYVRMS = 0xE890;
+constexpr uint16_t HYIRMS = 0xE891;
+constexpr uint16_t HYWATT = 0xE892;
+constexpr uint16_t HYVAR = 0xE893;
+constexpr uint16_t HYVA = 0xE894;
+constexpr uint16_t HYPF = 0xE895;
+constexpr uint16_t HYVHD = 0xE896;
+constexpr uint16_t HYIHD = 0xE897;
+constexpr uint16_t HZVRMS = 0xE898;
+constexpr uint16_t HZIRMS = 0xE899;
+constexpr uint16_t HZWATT = 0xE89A;
+constexpr uint16_t HZVAR = 0xE89B;
+constexpr uint16_t HZVA = 0xE89C;
+constexpr uint16_t HZPF = 0xE89D;
+constexpr uint16_t HZVHD = 0xE89E;
+constexpr uint16_t HZIHD = 0xE89F;
+constexpr uint16_t HCONFIG = 0xE900;
+constexpr uint16_t APF = 0xE902;
+constexpr uint16_t BPF = 0xE903;
+constexpr uint16_t CPF = 0xE904;
+constexpr uint16_t APERIOD = 0xE905;
+constexpr uint16_t BPERIOD = 0xE906;
+constexpr uint16_t CPERIOD = 0xE907;
+constexpr uint16_t APNOLOAD = 0xE908;
+constexpr uint16_t VARNOLOAD = 0xE909;
+constexpr uint16_t VANOLOAD = 0xE90A;
+constexpr uint16_t LAST_ADD = 0xE9FE;
+constexpr uint16_t LAST_RWDATA_16BIT = 0xE9FF;
+constexpr uint16_t CONFIG3 = 0xEA00;
+constexpr uint16_t LAST_OP = 0xEA01;
+constexpr uint16_t WTHR = 0xEA02;
+constexpr uint16_t VARTHR = 0xEA03;
+constexpr uint16_t VATHR = 0xEA04;
+
+constexpr uint16_t HX_REG = 0xEA08;
+constexpr uint16_t HY_REG = 0xEA09;
+constexpr uint16_t HZ_REG = 0xEA0A;
+constexpr uint16_t LPOILVL = 0xEC00;
+constexpr uint16_t CONFIG2 = 0xEC01;
+
+// STATUS1 Register Bits
+constexpr uint32_t STATUS1_RSTDONE = (1 << 15);
+
+// CONFIG Register Bits
+constexpr uint16_t CONFIG_SWRST = (1 << 7);
+
+// CONFIG2 Register Bits
+constexpr uint8_t CONFIG2_I2C_LOCK = (1 << 1);
+
+// COMPMODE Register Bits
+constexpr uint16_t COMPMODE_DEFAULT = 0x01FF;
+constexpr uint16_t COMPMODE_SELFREQ = (1 << 14);
+
+// RUN Register Bits
+constexpr uint16_t RUN_ENABLE = (1 << 0);
+
+// DSPWP_SET Register Bits
+constexpr uint8_t DSPWP_SET_RO = (1 << 7);
+
+// DSPWP_SEL Register Bits
+constexpr uint8_t DSPWP_SEL_SET = 0xAD;
+
+}  // namespace ade7880
+}  // namespace esphome

esphome/components/ade7880/sensor.py

@@ -0,0 +1,290 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, i2c
+from esphome import pins
+from esphome.const import (
+    CONF_ACTIVE_POWER,
+    CONF_APPARENT_POWER,
+    CONF_CALIBRATION,
+    CONF_CURRENT,
+    CONF_FORWARD_ACTIVE_ENERGY,
+    CONF_FREQUENCY,
+    CONF_ID,
+    CONF_NAME,
+    CONF_PHASE_A,
+    CONF_PHASE_ANGLE,
+    CONF_PHASE_B,
+    CONF_PHASE_C,
+    CONF_POWER_FACTOR,
+    CONF_RESET_PIN,
+    CONF_REVERSE_ACTIVE_ENERGY,
+    CONF_VOLTAGE,
+    CONF_VOLTAGE_GAIN,
+    DEVICE_CLASS_APPARENT_POWER,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_VOLTAGE,
+    STATE_CLASS_MEASUREMENT,
+    STATE_CLASS_TOTAL_INCREASING,
+    UNIT_AMPERE,
+    UNIT_PERCENT,
+    UNIT_VOLT,
+    UNIT_VOLT_AMPS,
+    UNIT_VOLT_AMPS_REACTIVE_HOURS,
+    UNIT_WATT,
+    UNIT_WATT_HOURS,
+)
+
+DEPENDENCIES = ["i2c"]
+
+ade7880_ns = cg.esphome_ns.namespace("ade7880")
+ADE7880 = ade7880_ns.class_("ADE7880", cg.PollingComponent, i2c.I2CDevice)
+NeutralChannel = ade7880_ns.struct("NeutralChannel")
+PowerChannel = ade7880_ns.struct("PowerChannel")
+
+CONF_CURRENT_GAIN = "current_gain"
+CONF_IRQ0_PIN = "irq0_pin"
+CONF_IRQ1_PIN = "irq1_pin"
+CONF_POWER_GAIN = "power_gain"
+
+CONF_NEUTRAL = "neutral"
+
+NEUTRAL_CHANNEL_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(NeutralChannel),
+        cv.Optional(CONF_NAME): cv.string_strict,
+        cv.Required(CONF_CURRENT): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_AMPERE,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_CURRENT,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Required(CONF_CALIBRATION): cv.Schema(
+            {
+                cv.Required(CONF_CURRENT_GAIN): cv.int_,
+            },
+        ),
+    }
+)
+
+POWER_CHANNEL_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(PowerChannel),
+        cv.Optional(CONF_NAME): cv.string_strict,
+        cv.Optional(CONF_VOLTAGE): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_VOLTAGE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_CURRENT): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_AMPERE,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_CURRENT,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_ACTIVE_POWER): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_POWER,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_APPARENT_POWER): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT_AMPS,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_APPARENT_POWER,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_POWER_FACTOR): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_POWER_FACTOR,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_FORWARD_ACTIVE_ENERGY): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_WATT_HOURS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_ENERGY,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Optional(CONF_REVERSE_ACTIVE_ENERGY): cv.maybe_simple_value(
+            sensor.sensor_schema(
+                unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE_HOURS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_ENERGY,
+                state_class=STATE_CLASS_TOTAL_INCREASING,
+            ),
+            key=CONF_NAME,
+        ),
+        cv.Required(CONF_CALIBRATION): cv.Schema(
+            {
+                cv.Required(CONF_CURRENT_GAIN): cv.int_,
+                cv.Required(CONF_VOLTAGE_GAIN): cv.int_,
+                cv.Required(CONF_POWER_GAIN): cv.int_,
+                cv.Required(CONF_PHASE_ANGLE): cv.int_,
+            },
+        ),
+    }
+)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ADE7880),
+            cv.Optional(CONF_FREQUENCY, default="50Hz"): cv.All(
+                cv.frequency, cv.Range(min=45.0, max=66.0)
+            ),
+            cv.Optional(CONF_IRQ0_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Required(CONF_IRQ1_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Optional(CONF_RESET_PIN): pins.internal_gpio_output_pin_schema,
+            cv.Optional(CONF_PHASE_A): POWER_CHANNEL_SCHEMA,
+            cv.Optional(CONF_PHASE_B): POWER_CHANNEL_SCHEMA,
+            cv.Optional(CONF_PHASE_C): POWER_CHANNEL_SCHEMA,
+            cv.Optional(CONF_NEUTRAL): NEUTRAL_CHANNEL_SCHEMA,
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x38))
+)
+
+
+async def neutral_channel(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+
+    current = config[CONF_CURRENT]
+    sens = await sensor.new_sensor(current)
+    cg.add(var.set_current(sens))
+
+    cg.add(
+        var.set_current_gain_calibration(config[CONF_CALIBRATION][CONF_CURRENT_GAIN])
+    )
+
+    return var
+
+
+async def power_channel(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+
+    for sensor_type in [
+        CONF_CURRENT,
+        CONF_VOLTAGE,
+        CONF_ACTIVE_POWER,
+        CONF_APPARENT_POWER,
+        CONF_POWER_FACTOR,
+        CONF_FORWARD_ACTIVE_ENERGY,
+        CONF_REVERSE_ACTIVE_ENERGY,
+    ]:
+        if conf := config.get(sensor_type):
+            sens = await sensor.new_sensor(conf)
+            cg.add(getattr(var, f"set_{sensor_type}")(sens))
+
+    for calib_type in [
+        CONF_CURRENT_GAIN,
+        CONF_VOLTAGE_GAIN,
+        CONF_POWER_GAIN,
+        CONF_PHASE_ANGLE,
+    ]:
+        cg.add(
+            getattr(var, f"set_{calib_type}_calibration")(
+                config[CONF_CALIBRATION][calib_type]
+            )
+        )
+
+    return var
+
+
+def final_validate(config):
+    for channel in [CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C]:
+        if channel := config.get(channel):
+            channel_name = channel.get(CONF_NAME)
+
+            for sensor_type in [
+                CONF_CURRENT,
+                CONF_VOLTAGE,
+                CONF_ACTIVE_POWER,
+                CONF_APPARENT_POWER,
+                CONF_POWER_FACTOR,
+                CONF_FORWARD_ACTIVE_ENERGY,
+                CONF_REVERSE_ACTIVE_ENERGY,
+            ]:
+                if conf := channel.get(sensor_type):
+                    sensor_name = conf.get(CONF_NAME)
+                    if (
+                        sensor_name
+                        and channel_name
+                        and not sensor_name.startswith(channel_name)
+                    ):
+                        conf[CONF_NAME] = f"{channel_name} {sensor_name}"
+
+    if channel := config.get(CONF_NEUTRAL):
+        channel_name = channel.get(CONF_NAME)
+        if conf := channel.get(CONF_CURRENT):
+            sensor_name = conf.get(CONF_NAME)
+            if (
+                sensor_name
+                and channel_name
+                and not sensor_name.startswith(channel_name)
+            ):
+                conf[CONF_NAME] = f"{channel_name} {sensor_name}"
+
+
+FINAL_VALIDATE_SCHEMA = final_validate
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    if irq0_pin := config.get(CONF_IRQ0_PIN):
+        pin = await cg.gpio_pin_expression(irq0_pin)
+        cg.add(var.set_irq0_pin(pin))
+
+    pin = await cg.gpio_pin_expression(config[CONF_IRQ1_PIN])
+    cg.add(var.set_irq1_pin(pin))
+
+    if reset_pin := config.get(CONF_RESET_PIN):
+        pin = await cg.gpio_pin_expression(reset_pin)
+        cg.add(var.set_reset_pin(pin))
+
+    if frequency := config.get(CONF_FREQUENCY):
+        cg.add(var.set_frequency(frequency))
+
+    if channel := config.get(CONF_PHASE_A):
+        chan = await power_channel(channel)
+        cg.add(var.set_channel_a(chan))
+
+    if channel := config.get(CONF_PHASE_B):
+        chan = await power_channel(channel)
+        cg.add(var.set_channel_b(chan))
+
+    if channel := config.get(CONF_PHASE_C):
+        chan = await power_channel(channel)
+        cg.add(var.set_channel_c(chan))
+
+    if channel := config.get(CONF_NEUTRAL):
+        chan = await neutral_channel(channel)
+        cg.add(var.set_channel_n(chan))

esphome/components/ade7953/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@angelnu"]

esphome/components/ade7953/ade7953.cpp

@@ -1,53 +0,0 @@
-#include "ade7953.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace ade7953 {
-
-static const char *const TAG = "ade7953";
-
-void ADE7953::dump_config() {
-  ESP_LOGCONFIG(TAG, "ADE7953:");
-  LOG_PIN("  IRQ Pin: ", irq_pin_);
-  LOG_I2C_DEVICE(this);
-  LOG_UPDATE_INTERVAL(this);
-  LOG_SENSOR("  ", "Voltage Sensor", this->voltage_sensor_);
-  LOG_SENSOR("  ", "Current A Sensor", this->current_a_sensor_);
-  LOG_SENSOR("  ", "Current B Sensor", this->current_b_sensor_);
-  LOG_SENSOR("  ", "Active Power A Sensor", this->active_power_a_sensor_);
-  LOG_SENSOR("  ", "Active Power B Sensor", this->active_power_b_sensor_);
-}
-
-#define ADE_PUBLISH_(name, val, factor) \
-  if (err == i2c::ERROR_OK && this->name##_sensor_) { \
-    float value = (val) / (factor); \
-    this->name##_sensor_->publish_state(value); \
-  }
-#define ADE_PUBLISH(name, val, factor) ADE_PUBLISH_(name, val, factor)
-
-void ADE7953::update() {
-  if (!this->is_setup_)
-    return;
-
-  uint32_t val;
-  i2c::ErrorCode err = ade_read_32_(0x0312, &val);
-  ADE_PUBLISH(active_power_a, (int32_t) val, 154.0f);
-  err = ade_read_32_(0x0313, &val);
-  ADE_PUBLISH(active_power_b, (int32_t) val, 154.0f);
-  err = ade_read_32_(0x031A, &val);
-  ADE_PUBLISH(current_a, (uint32_t) val, 100000.0f);
-  err = ade_read_32_(0x031B, &val);
-  ADE_PUBLISH(current_b, (uint32_t) val, 100000.0f);
-  err = ade_read_32_(0x031C, &val);
-  ADE_PUBLISH(voltage, (uint32_t) val, 26000.0f);
-
-  //    auto apparent_power_a = this->ade_read_<int32_t>(0x0310);
-  //    auto apparent_power_b = this->ade_read_<int32_t>(0x0311);
-  //    auto reactive_power_a = this->ade_read_<int32_t>(0x0314);
-  //    auto reactive_power_b = this->ade_read_<int32_t>(0x0315);
-  //    auto power_factor_a = this->ade_read_<int16_t>(0x010A);
-  //    auto power_factor_b = this->ade_read_<int16_t>(0x010B);
-}
-
-}  // namespace ade7953
-}  // namespace esphome

esphome/components/ade7953/ade7953.h

@@ -1,97 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/core/hal.h"
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/components/sensor/sensor.h"
-
-#include <vector>
-
-namespace esphome {
-namespace ade7953 {
-
-class ADE7953 : public i2c::I2CDevice, public PollingComponent {
- public:
-  void set_irq_pin(InternalGPIOPin *irq_pin) { irq_pin_ = irq_pin; }
-  void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
-  void set_current_a_sensor(sensor::Sensor *current_a_sensor) { current_a_sensor_ = current_a_sensor; }
-  void set_current_b_sensor(sensor::Sensor *current_b_sensor) { current_b_sensor_ = current_b_sensor; }
-  void set_active_power_a_sensor(sensor::Sensor *active_power_a_sensor) {
-    active_power_a_sensor_ = active_power_a_sensor;
-  }
-  void set_active_power_b_sensor(sensor::Sensor *active_power_b_sensor) {
-    active_power_b_sensor_ = active_power_b_sensor;
-  }
-
-  void setup() override {
-    if (this->irq_pin_ != nullptr) {
-      this->irq_pin_->setup();
-    }
-    this->set_timeout(100, [this]() {
-      this->ade_write_8_(0x0010, 0x04);
-      this->ade_write_8_(0x00FE, 0xAD);
-      this->ade_write_16_(0x0120, 0x0030);
-      this->is_setup_ = true;
-    });
-  }
-
-  void dump_config() override;
-
-  void update() override;
-
- protected:
-  i2c::ErrorCode ade_write_8_(uint16_t reg, uint8_t value) {
-    std::vector<uint8_t> data;
-    data.push_back(reg >> 8);
-    data.push_back(reg >> 0);
-    data.push_back(value);
-    return write(data.data(), data.size());
-  }
-  i2c::ErrorCode ade_write_16_(uint16_t reg, uint16_t value) {
-    std::vector<uint8_t> data;
-    data.push_back(reg >> 8);
-    data.push_back(reg >> 0);
-    data.push_back(value >> 8);
-    data.push_back(value >> 0);
-    return write(data.data(), data.size());
-  }
-  i2c::ErrorCode ade_write_32_(uint16_t reg, uint32_t value) {
-    std::vector<uint8_t> data;
-    data.push_back(reg >> 8);
-    data.push_back(reg >> 0);
-    data.push_back(value >> 24);
-    data.push_back(value >> 16);
-    data.push_back(value >> 8);
-    data.push_back(value >> 0);
-    return write(data.data(), data.size());
-  }
-  i2c::ErrorCode ade_read_32_(uint16_t reg, uint32_t *value) {
-    uint8_t reg_data[2];
-    reg_data[0] = reg >> 8;
-    reg_data[1] = reg >> 0;
-    i2c::ErrorCode err = write(reg_data, 2);
-    if (err != i2c::ERROR_OK)
-      return err;
-    uint8_t recv[4];
-    err = read(recv, 4);
-    if (err != i2c::ERROR_OK)
-      return err;
-    *value = 0;
-    *value |= ((uint32_t) recv[0]) << 24;
-    *value |= ((uint32_t) recv[1]) << 16;
-    *value |= ((uint32_t) recv[2]) << 8;
-    *value |= ((uint32_t) recv[3]);
-    return i2c::ERROR_OK;
-  }
-
-  InternalGPIOPin *irq_pin_{nullptr};
-  bool is_setup_{false};
-  sensor::Sensor *voltage_sensor_{nullptr};
-  sensor::Sensor *current_a_sensor_{nullptr};
-  sensor::Sensor *current_b_sensor_{nullptr};
-  sensor::Sensor *active_power_a_sensor_{nullptr};
-  sensor::Sensor *active_power_b_sensor_{nullptr};
-};
-
-}  // namespace ade7953
-}  // namespace esphome

esphome/components/ade7953/sensor.py

@@ -1,90 +1,5 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor, i2c
-from esphome import pins
-from esphome.const import (
-    CONF_ID,
-    CONF_VOLTAGE,
-    DEVICE_CLASS_CURRENT,
-    DEVICE_CLASS_POWER,
-    DEVICE_CLASS_VOLTAGE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_VOLT,
-    UNIT_AMPERE,
-    UNIT_WATT,
+
+CONFIG_SCHEMA = cv.invalid(
+    "The ade7953 sensor component has been renamed to ade7953_i2c."
 )
-
-DEPENDENCIES = ["i2c"]
-
-ade7953_ns = cg.esphome_ns.namespace("ade7953")
-ADE7953 = ade7953_ns.class_("ADE7953", cg.PollingComponent, i2c.I2CDevice)
-
-CONF_IRQ_PIN = "irq_pin"
-CONF_CURRENT_A = "current_a"
-CONF_CURRENT_B = "current_b"
-CONF_ACTIVE_POWER_A = "active_power_a"
-CONF_ACTIVE_POWER_B = "active_power_b"
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(ADE7953),
-            cv.Optional(CONF_IRQ_PIN): pins.internal_gpio_input_pin_schema,
-            cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_VOLT,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_VOLTAGE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_CURRENT_A): sensor.sensor_schema(
-                unit_of_measurement=UNIT_AMPERE,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_CURRENT,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_CURRENT_B): sensor.sensor_schema(
-                unit_of_measurement=UNIT_AMPERE,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_CURRENT,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_ACTIVE_POWER_A): sensor.sensor_schema(
-                unit_of_measurement=UNIT_WATT,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_POWER,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_ACTIVE_POWER_B): sensor.sensor_schema(
-                unit_of_measurement=UNIT_WATT,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_POWER,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("60s"))
-    .extend(i2c.i2c_device_schema(0x38))
-)
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-    if irq_pin_config := config.get(CONF_IRQ_PIN):
-        irq_pin = await cg.gpio_pin_expression(irq_pin_config)
-        cg.add(var.set_irq_pin(irq_pin))
-
-    for key in [
-        CONF_VOLTAGE,
-        CONF_CURRENT_A,
-        CONF_CURRENT_B,
-        CONF_ACTIVE_POWER_A,
-        CONF_ACTIVE_POWER_B,
-    ]:
-        if key not in config:
-            continue
-        conf = config[key]
-        sens = await sensor.new_sensor(conf)
-        cg.add(getattr(var, f"set_{key}_sensor")(sens))

esphome/components/ade7953_base/__init__.py

@@ -0,0 +1,201 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome import pins
+from esphome.const import (
+    CONF_IRQ_PIN,
+    CONF_VOLTAGE,
+    CONF_FREQUENCY,
+    CONF_VOLTAGE_GAIN,
+    DEVICE_CLASS_CURRENT,
+    DEVICE_CLASS_APPARENT_POWER,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_REACTIVE_POWER,
+    DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_VOLTAGE,
+    DEVICE_CLASS_FREQUENCY,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_VOLT,
+    UNIT_HERTZ,
+    UNIT_AMPERE,
+    UNIT_VOLT_AMPS,
+    UNIT_WATT,
+    UNIT_VOLT_AMPS_REACTIVE,
+    UNIT_PERCENT,
+)
+
+CONF_CURRENT_A = "current_a"
+CONF_CURRENT_B = "current_b"
+CONF_ACTIVE_POWER_A = "active_power_a"
+CONF_ACTIVE_POWER_B = "active_power_b"
+CONF_APPARENT_POWER_A = "apparent_power_a"
+CONF_APPARENT_POWER_B = "apparent_power_b"
+CONF_REACTIVE_POWER_A = "reactive_power_a"
+CONF_REACTIVE_POWER_B = "reactive_power_b"
+CONF_POWER_FACTOR_A = "power_factor_a"
+CONF_POWER_FACTOR_B = "power_factor_b"
+CONF_VOLTAGE_PGA_GAIN = "voltage_pga_gain"
+CONF_CURRENT_PGA_GAIN_A = "current_pga_gain_a"
+CONF_CURRENT_PGA_GAIN_B = "current_pga_gain_b"
+CONF_CURRENT_GAIN_A = "current_gain_a"
+CONF_CURRENT_GAIN_B = "current_gain_b"
+CONF_ACTIVE_POWER_GAIN_A = "active_power_gain_a"
+CONF_ACTIVE_POWER_GAIN_B = "active_power_gain_b"
+CONF_USE_ACCUMULATED_ENERGY_REGISTERS = "use_accumulated_energy_registers"
+PGA_GAINS = {
+    "1x": 0b000,
+    "2x": 0b001,
+    "4x": 0b010,
+    "8x": 0b011,
+    "16x": 0b100,
+    "22x": 0b101,
+}
+
+ade7953_base_ns = cg.esphome_ns.namespace("ade7953_base")
+ADE7953 = ade7953_base_ns.class_("ADE7953", cg.PollingComponent)
+
+ADE7953_CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.Optional(CONF_IRQ_PIN): pins.internal_gpio_input_pin_schema,
+        cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_VOLTAGE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_FREQUENCY): sensor.sensor_schema(
+            unit_of_measurement=UNIT_HERTZ,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_FREQUENCY,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_CURRENT_A): sensor.sensor_schema(
+            unit_of_measurement=UNIT_AMPERE,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_CURRENT,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_CURRENT_B): sensor.sensor_schema(
+            unit_of_measurement=UNIT_AMPERE,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_CURRENT,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_ACTIVE_POWER_A): sensor.sensor_schema(
+            unit_of_measurement=UNIT_WATT,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_ACTIVE_POWER_B): sensor.sensor_schema(
+            unit_of_measurement=UNIT_WATT,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_APPARENT_POWER_A): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_APPARENT_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_APPARENT_POWER_B): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_APPARENT_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_REACTIVE_POWER_A): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_REACTIVE_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_REACTIVE_POWER_B): sensor.sensor_schema(
+            unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
+            accuracy_decimals=1,
+            device_class=DEVICE_CLASS_REACTIVE_POWER,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_POWER_FACTOR_A): sensor.sensor_schema(
+            unit_of_measurement=UNIT_PERCENT,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_POWER_FACTOR,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(CONF_POWER_FACTOR_B): sensor.sensor_schema(
+            unit_of_measurement=UNIT_PERCENT,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_POWER_FACTOR,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional(
+            CONF_VOLTAGE_PGA_GAIN,
+            default="1x",
+        ): cv.one_of(*PGA_GAINS, lower=True),
+        cv.Optional(
+            CONF_CURRENT_PGA_GAIN_A,
+            default="1x",
+        ): cv.one_of(*PGA_GAINS, lower=True),
+        cv.Optional(
+            CONF_CURRENT_PGA_GAIN_B,
+            default="1x",
+        ): cv.one_of(*PGA_GAINS, lower=True),
+        cv.Optional(CONF_VOLTAGE_GAIN, default=0x400000): cv.hex_int_range(
+            min=0x100000, max=0x800000
+        ),
+        cv.Optional(CONF_CURRENT_GAIN_A, default=0x400000): cv.hex_int_range(
+            min=0x100000, max=0x800000
+        ),
+        cv.Optional(CONF_CURRENT_GAIN_B, default=0x400000): cv.hex_int_range(
+            min=0x100000, max=0x800000
+        ),
+        cv.Optional(CONF_ACTIVE_POWER_GAIN_A, default=0x400000): cv.hex_int_range(
+            min=0x100000, max=0x800000
+        ),
+        cv.Optional(CONF_ACTIVE_POWER_GAIN_B, default=0x400000): cv.hex_int_range(
+            min=0x100000, max=0x800000
+        ),
+        cv.Optional(CONF_USE_ACCUMULATED_ENERGY_REGISTERS, default=False): cv.boolean,
+    }
+).extend(cv.polling_component_schema("60s"))
+
+
+async def register_ade7953(var, config):
+    await cg.register_component(var, config)
+
+    if irq_pin_config := config.get(CONF_IRQ_PIN):
+        irq_pin = await cg.gpio_pin_expression(irq_pin_config)
+        cg.add(var.set_irq_pin(irq_pin))
+
+    cg.add(var.set_pga_v(PGA_GAINS[config.get(CONF_VOLTAGE_PGA_GAIN)]))
+    cg.add(var.set_pga_ia(PGA_GAINS[config.get(CONF_CURRENT_PGA_GAIN_A)]))
+    cg.add(var.set_pga_ib(PGA_GAINS[config.get(CONF_CURRENT_PGA_GAIN_B)]))
+    cg.add(var.set_vgain(config.get(CONF_VOLTAGE_GAIN)))
+    cg.add(var.set_aigain(config.get(CONF_CURRENT_GAIN_A)))
+    cg.add(var.set_bigain(config.get(CONF_CURRENT_GAIN_B)))
+    cg.add(var.set_awgain(config.get(CONF_ACTIVE_POWER_GAIN_A)))
+    cg.add(var.set_bwgain(config.get(CONF_ACTIVE_POWER_GAIN_B)))
+    cg.add(
+        var.set_use_acc_energy_regs(config.get(CONF_USE_ACCUMULATED_ENERGY_REGISTERS))
+    )
+
+    for key in [
+        CONF_VOLTAGE,
+        CONF_FREQUENCY,
+        CONF_CURRENT_A,
+        CONF_CURRENT_B,
+        CONF_POWER_FACTOR_A,
+        CONF_POWER_FACTOR_B,
+        CONF_APPARENT_POWER_A,
+        CONF_APPARENT_POWER_B,
+        CONF_ACTIVE_POWER_A,
+        CONF_ACTIVE_POWER_B,
+        CONF_REACTIVE_POWER_A,
+        CONF_REACTIVE_POWER_B,
+    ]:
+        if key not in config:
+            continue
+        conf = config[key]
+        sens = await sensor.new_sensor(conf)
+        cg.add(getattr(var, f"set_{key}_sensor")(sens))

esphome/components/ade7953_base/ade7953_base.cpp

@@ -0,0 +1,150 @@
+#include "ade7953_base.h"
+#include "esphome/core/log.h"
+
+#include <cinttypes>
+
+namespace esphome {
+namespace ade7953_base {
+
+static const char *const TAG = "ade7953";
+
+static const float ADE_POWER_FACTOR = 154.0f;
+static const float ADE_WATTSEC_POWER_FACTOR = ADE_POWER_FACTOR * ADE_POWER_FACTOR / 3600;
+
+void ADE7953::setup() {
+  if (this->irq_pin_ != nullptr) {
+    this->irq_pin_->setup();
+  }
+
+  // The chip might take up to 100ms to initialise
+  this->set_timeout(100, [this]() {
+    // this->ade_write_8(0x0010, 0x04);
+    this->ade_write_8(0x00FE, 0xAD);
+    this->ade_write_16(0x0120, 0x0030);
+    // Set gains
+    this->ade_write_8(PGA_V_8, pga_v_);
+    this->ade_write_8(PGA_IA_8, pga_ia_);
+    this->ade_write_8(PGA_IB_8, pga_ib_);
+    this->ade_write_32(AVGAIN_32, vgain_);
+    this->ade_write_32(AIGAIN_32, aigain_);
+    this->ade_write_32(BIGAIN_32, bigain_);
+    this->ade_write_32(AWGAIN_32, awgain_);
+    this->ade_write_32(BWGAIN_32, bwgain_);
+    // Read back gains for debugging
+    this->ade_read_8(PGA_V_8, &pga_v_);
+    this->ade_read_8(PGA_IA_8, &pga_ia_);
+    this->ade_read_8(PGA_IB_8, &pga_ib_);
+    this->ade_read_32(AVGAIN_32, &vgain_);
+    this->ade_read_32(AIGAIN_32, &aigain_);
+    this->ade_read_32(BIGAIN_32, &bigain_);
+    this->ade_read_32(AWGAIN_32, &awgain_);
+    this->ade_read_32(BWGAIN_32, &bwgain_);
+    this->last_update_ = millis();
+    this->is_setup_ = true;
+  });
+}
+
+void ADE7953::dump_config() {
+  LOG_PIN("  IRQ Pin: ", irq_pin_);
+  LOG_UPDATE_INTERVAL(this);
+  LOG_SENSOR("  ", "Voltage Sensor", this->voltage_sensor_);
+  LOG_SENSOR("  ", "Current A Sensor", this->current_a_sensor_);
+  LOG_SENSOR("  ", "Current B Sensor", this->current_b_sensor_);
+  LOG_SENSOR("  ", "Power Factor A Sensor", this->power_factor_a_sensor_);
+  LOG_SENSOR("  ", "Power Factor B Sensor", this->power_factor_b_sensor_);
+  LOG_SENSOR("  ", "Apparent Power A Sensor", this->apparent_power_a_sensor_);
+  LOG_SENSOR("  ", "Apparent Power B Sensor", this->apparent_power_b_sensor_);
+  LOG_SENSOR("  ", "Active Power A Sensor", this->active_power_a_sensor_);
+  LOG_SENSOR("  ", "Active Power B Sensor", this->active_power_b_sensor_);
+  LOG_SENSOR("  ", "Rective Power A Sensor", this->reactive_power_a_sensor_);
+  LOG_SENSOR("  ", "Reactive Power B Sensor", this->reactive_power_b_sensor_);
+  ESP_LOGCONFIG(TAG, "  USE_ACC_ENERGY_REGS: %d", this->use_acc_energy_regs_);
+  ESP_LOGCONFIG(TAG, "  PGA_V_8: 0x%X", pga_v_);
+  ESP_LOGCONFIG(TAG, "  PGA_IA_8: 0x%X", pga_ia_);
+  ESP_LOGCONFIG(TAG, "  PGA_IB_8: 0x%X", pga_ib_);
+  ESP_LOGCONFIG(TAG, "  VGAIN_32: 0x%08jX", (uintmax_t) vgain_);
+  ESP_LOGCONFIG(TAG, "  AIGAIN_32: 0x%08jX", (uintmax_t) aigain_);
+  ESP_LOGCONFIG(TAG, "  BIGAIN_32: 0x%08jX", (uintmax_t) bigain_);
+  ESP_LOGCONFIG(TAG, "  AWGAIN_32: 0x%08jX", (uintmax_t) awgain_);
+  ESP_LOGCONFIG(TAG, "  BWGAIN_32: 0x%08jX", (uintmax_t) bwgain_);
+}
+
+#define ADE_PUBLISH_(name, val, factor) \
+  if (err == 0 && this->name##_sensor_) { \
+    float value = (val) / (factor); \
+    this->name##_sensor_->publish_state(value); \
+  }
+#define ADE_PUBLISH(name, val, factor) ADE_PUBLISH_(name, val, factor)
+
+void ADE7953::update() {
+  if (!this->is_setup_)
+    return;
+
+  bool err;
+
+  uint32_t interrupts_a = 0;
+  uint32_t interrupts_b = 0;
+  if (this->irq_pin_ != nullptr) {
+    // Read and reset interrupts
+    this->ade_read_32(0x032E, &interrupts_a);
+    this->ade_read_32(0x0331, &interrupts_b);
+  }
+
+  uint32_t val;
+  uint16_t val_16;
+  uint16_t reg;
+
+  // Power factor
+  err = this->ade_read_16(0x010A, &val_16);
+  ADE_PUBLISH(power_factor_a, (int16_t) val_16, (0x7FFF / 100.0f));
+  err = this->ade_read_16(0x010B, &val_16);
+  ADE_PUBLISH(power_factor_b, (int16_t) val_16, (0x7FFF / 100.0f));
+
+  float pf = ADE_POWER_FACTOR;
+  if (this->use_acc_energy_regs_) {
+    const uint32_t now = millis();
+    const auto diff = now - this->last_update_;
+    this->last_update_ = now;
+    // prevent DIV/0
+    pf = ADE_WATTSEC_POWER_FACTOR * (diff < 10 ? 10 : diff) / 1000;
+    ESP_LOGVV(TAG, "ADE7953::update() diff=%" PRIu32 " pf=%f", diff, pf);
+  }
+
+  // Apparent power
+  reg = this->use_acc_energy_regs_ ? 0x0322 : 0x0310;
+  err = this->ade_read_32(reg, &val);
+  ADE_PUBLISH(apparent_power_a, (int32_t) val, pf);
+  err = this->ade_read_32(reg + 1, &val);
+  ADE_PUBLISH(apparent_power_b, (int32_t) val, pf);
+
+  // Active power
+  reg = this->use_acc_energy_regs_ ? 0x031E : 0x0312;
+  err = this->ade_read_32(reg, &val);
+  ADE_PUBLISH(active_power_a, (int32_t) val, pf);
+  err = this->ade_read_32(reg + 1, &val);
+  ADE_PUBLISH(active_power_b, (int32_t) val, pf);
+
+  // Reactive power
+  reg = this->use_acc_energy_regs_ ? 0x0320 : 0x0314;
+  err = this->ade_read_32(reg, &val);
+  ADE_PUBLISH(reactive_power_a, (int32_t) val, pf);
+  err = this->ade_read_32(reg + 1, &val);
+  ADE_PUBLISH(reactive_power_b, (int32_t) val, pf);
+
+  // Current
+  err = this->ade_read_32(0x031A, &val);
+  ADE_PUBLISH(current_a, (uint32_t) val, 100000.0f);
+  err = this->ade_read_32(0x031B, &val);
+  ADE_PUBLISH(current_b, (uint32_t) val, 100000.0f);
+
+  // Voltage
+  err = this->ade_read_32(0x031C, &val);
+  ADE_PUBLISH(voltage, (uint32_t) val, 26000.0f);
+
+  // Frequency
+  err = this->ade_read_16(0x010E, &val_16);
+  ADE_PUBLISH(frequency, 223750.0f, 1 + val_16);
+}
+
+}  // namespace ade7953_base
+}  // namespace esphome

esphome/components/ade7953_base/ade7953_base.h

@@ -0,0 +1,125 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/sensor/sensor.h"
+
+#include <vector>
+
+namespace esphome {
+namespace ade7953_base {
+
+static const uint8_t PGA_V_8 =
+    0x007;  // PGA_V,  (R/W) Default: 0x00, Unsigned, Voltage channel gain configuration (Bits[2:0])
+static const uint8_t PGA_IA_8 =
+    0x008;  // PGA_IA, (R/W) Default: 0x00, Unsigned, Current Channel A gain configuration (Bits[2:0])
+static const uint8_t PGA_IB_8 =
+    0x009;  // PGA_IB, (R/W) Default: 0x00, Unsigned, Current Channel B gain configuration (Bits[2:0])
+
+static const uint32_t AIGAIN_32 =
+    0x380;  // AIGAIN, (R/W)   Default: 0x400000, Unsigned,Current channel gain (Current Channel A)(32 bit)
+static const uint32_t AVGAIN_32 = 0x381;  // AVGAIN, (R/W)   Default: 0x400000, Unsigned,Voltage channel gain(32 bit)
+static const uint32_t AWGAIN_32 =
+    0x382;  // AWGAIN, (R/W)   Default: 0x400000, Unsigned,Active power gain (Current Channel A)(32 bit)
+static const uint32_t AVARGAIN_32 =
+    0x383;  // AVARGAIN, (R/W) Default: 0x400000, Unsigned, Reactive power gain (Current Channel A)(32 bit)
+static const uint32_t AVAGAIN_32 =
+    0x384;  // AVAGAIN, (R/W)  Default: 0x400000, Unsigned,Apparent power gain (Current Channel A)(32 bit)
+
+static const uint32_t BIGAIN_32 =
+    0x38C;  // BIGAIN, (R/W)   Default: 0x400000, Unsigned,Current channel gain (Current Channel B)(32 bit)
+static const uint32_t BVGAIN_32 = 0x38D;  // BVGAIN, (R/W)   Default: 0x400000, Unsigned,Voltage channel gain(32 bit)
+static const uint32_t BWGAIN_32 =
+    0x38E;  // BWGAIN, (R/W)   Default: 0x400000, Unsigned,Active power gain (Current Channel B)(32 bit)
+static const uint32_t BVARGAIN_32 =
+    0x38F;  // BVARGAIN, (R/W) Default: 0x400000, Unsigned, Reactive power gain (Current Channel B)(32 bit)
+static const uint32_t BVAGAIN_32 =
+    0x390;  // BVAGAIN, (R/W)  Default: 0x400000, Unsigned,Apparent power gain (Current Channel B)(32 bit)
+
+class ADE7953 : public PollingComponent, public sensor::Sensor {
+ public:
+  void set_irq_pin(InternalGPIOPin *irq_pin) { irq_pin_ = irq_pin; }
+
+  // Set PGA input gains: 0 1x, 1 2x, 0b10 4x
+  void set_pga_v(uint8_t pga_v) { pga_v_ = pga_v; }
+  void set_pga_ia(uint8_t pga_ia) { pga_ia_ = pga_ia; }
+  void set_pga_ib(uint8_t pga_ib) { pga_ib_ = pga_ib; }
+
+  // Set input gains
+  void set_vgain(uint32_t vgain) { vgain_ = vgain; }
+  void set_aigain(uint32_t aigain) { aigain_ = aigain; }
+  void set_bigain(uint32_t bigain) { bigain_ = bigain; }
+  void set_awgain(uint32_t awgain) { awgain_ = awgain; }
+  void set_bwgain(uint32_t bwgain) { bwgain_ = bwgain; }
+
+  void set_use_acc_energy_regs(bool use_acc_energy_regs) { use_acc_energy_regs_ = use_acc_energy_regs; }
+
+  void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
+  void set_frequency_sensor(sensor::Sensor *frequency_sensor) { frequency_sensor_ = frequency_sensor; }
+
+  void set_power_factor_a_sensor(sensor::Sensor *power_factor_a) { power_factor_a_sensor_ = power_factor_a; }
+  void set_power_factor_b_sensor(sensor::Sensor *power_factor_b) { power_factor_b_sensor_ = power_factor_b; }
+
+  void set_current_a_sensor(sensor::Sensor *current_a_sensor) { current_a_sensor_ = current_a_sensor; }
+  void set_current_b_sensor(sensor::Sensor *current_b_sensor) { current_b_sensor_ = current_b_sensor; }
+
+  void set_apparent_power_a_sensor(sensor::Sensor *apparent_power_a) { apparent_power_a_sensor_ = apparent_power_a; }
+  void set_apparent_power_b_sensor(sensor::Sensor *apparent_power_b) { apparent_power_b_sensor_ = apparent_power_b; }
+
+  void set_active_power_a_sensor(sensor::Sensor *active_power_a_sensor) {
+    active_power_a_sensor_ = active_power_a_sensor;
+  }
+  void set_active_power_b_sensor(sensor::Sensor *active_power_b_sensor) {
+    active_power_b_sensor_ = active_power_b_sensor;
+  }
+
+  void set_reactive_power_a_sensor(sensor::Sensor *reactive_power_a) { reactive_power_a_sensor_ = reactive_power_a; }
+  void set_reactive_power_b_sensor(sensor::Sensor *reactive_power_b) { reactive_power_b_sensor_ = reactive_power_b; }
+
+  void setup() override;
+
+  void dump_config() override;
+
+  void update() override;
+
+ protected:
+  InternalGPIOPin *irq_pin_{nullptr};
+  bool is_setup_{false};
+  sensor::Sensor *voltage_sensor_{nullptr};
+  sensor::Sensor *frequency_sensor_{nullptr};
+  sensor::Sensor *current_a_sensor_{nullptr};
+  sensor::Sensor *current_b_sensor_{nullptr};
+  sensor::Sensor *apparent_power_a_sensor_{nullptr};
+  sensor::Sensor *apparent_power_b_sensor_{nullptr};
+  sensor::Sensor *active_power_a_sensor_{nullptr};
+  sensor::Sensor *active_power_b_sensor_{nullptr};
+  sensor::Sensor *reactive_power_a_sensor_{nullptr};
+  sensor::Sensor *reactive_power_b_sensor_{nullptr};
+  sensor::Sensor *power_factor_a_sensor_{nullptr};
+  sensor::Sensor *power_factor_b_sensor_{nullptr};
+  uint8_t pga_v_;
+  uint8_t pga_ia_;
+  uint8_t pga_ib_;
+  uint32_t vgain_;
+  uint32_t aigain_;
+  uint32_t bigain_;
+  uint32_t awgain_;
+  uint32_t bwgain_;
+  bool use_acc_energy_regs_{false};
+  uint32_t last_update_;
+
+  virtual bool ade_write_8(uint16_t reg, uint8_t value) = 0;
+
+  virtual bool ade_write_16(uint16_t reg, uint16_t value) = 0;
+
+  virtual bool ade_write_32(uint16_t reg, uint32_t value) = 0;
+
+  virtual bool ade_read_8(uint16_t reg, uint8_t *value) = 0;
+
+  virtual bool ade_read_16(uint16_t reg, uint16_t *value) = 0;
+
+  virtual bool ade_read_32(uint16_t reg, uint32_t *value) = 0;
+};
+
+}  // namespace ade7953_base
+}  // namespace esphome

esphome/components/ade7953_i2c/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@angelnu"]

esphome/components/ade7953_i2c/ade7953_i2c.cpp

@@ -0,0 +1,80 @@
+#include "ade7953_i2c.h"
+#include "esphome/core/log.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace ade7953_i2c {
+
+static const char *const TAG = "ade7953";
+
+void AdE7953I2c::dump_config() {
+  ESP_LOGCONFIG(TAG, "ADE7953_i2c:");
+  LOG_I2C_DEVICE(this);
+  ade7953_base::ADE7953::dump_config();
+}
+bool AdE7953I2c::ade_write_8(uint16_t reg, uint8_t value) {
+  uint8_t data[3];
+  data[0] = reg >> 8;
+  data[1] = reg >> 0;
+  data[2] = value;
+  return this->write(data, 3) != i2c::ERROR_OK;
+}
+bool AdE7953I2c::ade_write_16(uint16_t reg, uint16_t value) {
+  uint8_t data[4];
+  data[0] = reg >> 8;
+  data[1] = reg >> 0;
+  data[2] = value >> 8;
+  data[3] = value >> 0;
+  return this->write(data, 4) != i2c::ERROR_OK;
+}
+bool AdE7953I2c::ade_write_32(uint16_t reg, uint32_t value) {
+  uint8_t data[6];
+  data[0] = reg >> 8;
+  data[1] = reg >> 0;
+  data[2] = value >> 24;
+  data[3] = value >> 16;
+  data[4] = value >> 8;
+  data[5] = value >> 0;
+  return this->write(data, 6) != i2c::ERROR_OK;
+}
+bool AdE7953I2c::ade_read_8(uint16_t reg, uint8_t *value) {
+  uint8_t reg_data[2];
+  reg_data[0] = reg >> 8;
+  reg_data[1] = reg >> 0;
+  i2c::ErrorCode err = this->write(reg_data, 2);
+  if (err != i2c::ERROR_OK)
+    return true;
+  err = this->read(value, 1);
+  return (err != i2c::ERROR_OK);
+}
+bool AdE7953I2c::ade_read_16(uint16_t reg, uint16_t *value) {
+  uint8_t reg_data[2];
+  reg_data[0] = reg >> 8;
+  reg_data[1] = reg >> 0;
+  i2c::ErrorCode err = this->write(reg_data, 2);
+  if (err != i2c::ERROR_OK)
+    return true;
+  uint8_t recv[2];
+  err = this->read(recv, 2);
+  if (err != i2c::ERROR_OK)
+    return true;
+  *value = encode_uint16(recv[0], recv[1]);
+  return false;
+}
+bool AdE7953I2c::ade_read_32(uint16_t reg, uint32_t *value) {
+  uint8_t reg_data[2];
+  reg_data[0] = reg >> 8;
+  reg_data[1] = reg >> 0;
+  i2c::ErrorCode err = this->write(reg_data, 2);
+  if (err != i2c::ERROR_OK)
+    return true;
+  uint8_t recv[4];
+  err = this->read(recv, 4);
+  if (err != i2c::ERROR_OK)
+    return true;
+  *value = encode_uint32(recv[0], recv[1], recv[2], recv[3]);
+  return false;
+}
+
+}  // namespace ade7953_i2c
+}  // namespace esphome

esphome/components/ade7953_i2c/ade7953_i2c.h

@@ -0,0 +1,28 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/ade7953_base/ade7953_base.h"
+
+#include <vector>
+
+namespace esphome {
+namespace ade7953_i2c {
+
+class AdE7953I2c : public ade7953_base::ADE7953, public i2c::I2CDevice {
+ public:
+  void dump_config() override;
+
+ protected:
+  bool ade_write_8(uint16_t reg, uint8_t value) override;
+  bool ade_write_16(uint16_t reg, uint16_t value) override;
+  bool ade_write_32(uint16_t reg, uint32_t value) override;
+  bool ade_read_8(uint16_t reg, uint8_t *value) override;
+  bool ade_read_16(uint16_t reg, uint16_t *value) override;
+  bool ade_read_32(uint16_t reg, uint32_t *value) override;
+};
+
+}  // namespace ade7953_i2c
+}  // namespace esphome

esphome/components/ade7953_i2c/sensor.py

@@ -0,0 +1,27 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import i2c, ade7953_base
+from esphome.const import CONF_ID
+
+
+DEPENDENCIES = ["i2c"]
+AUTO_LOAD = ["ade7953_base"]
+
+ade7953_ns = cg.esphome_ns.namespace("ade7953_i2c")
+ADE7953 = ade7953_ns.class_("AdE7953I2c", ade7953_base.ADE7953, i2c.I2CDevice)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ADE7953),
+        }
+    )
+    .extend(ade7953_base.ADE7953_CONFIG_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x38))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await i2c.register_i2c_device(var, config)
+    await ade7953_base.register_ade7953(var, config)

esphome/components/ade7953_spi/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@angelnu"]

esphome/components/ade7953_spi/ade7953_spi.cpp

@@ -0,0 +1,81 @@
+#include "ade7953_spi.h"
+#include "esphome/core/log.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace ade7953_spi {
+
+static const char *const TAG = "ade7953";
+
+void AdE7953Spi::setup() {
+  this->spi_setup();
+  ade7953_base::ADE7953::setup();
+}
+
+void AdE7953Spi::dump_config() {
+  ESP_LOGCONFIG(TAG, "ADE7953_spi:");
+  LOG_PIN("  CS Pin: ", this->cs_);
+  ade7953_base::ADE7953::dump_config();
+}
+
+bool AdE7953Spi::ade_write_8(uint16_t reg, uint8_t value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0);
+  this->transfer_byte(value);
+  this->disable();
+  return false;
+}
+
+bool AdE7953Spi::ade_write_16(uint16_t reg, uint16_t value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0);
+  this->write_byte16(value);
+  this->disable();
+  return false;
+}
+
+bool AdE7953Spi::ade_write_32(uint16_t reg, uint32_t value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0);
+  this->write_byte16(value >> 16);
+  this->write_byte16(value & 0xFFFF);
+  this->disable();
+  return false;
+}
+
+bool AdE7953Spi::ade_read_8(uint16_t reg, uint8_t *value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0x80);
+  *value = this->read_byte();
+  this->disable();
+  return false;
+}
+
+bool AdE7953Spi::ade_read_16(uint16_t reg, uint16_t *value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0x80);
+  uint8_t recv[2];
+  this->read_array(recv, 2);
+  *value = encode_uint16(recv[0], recv[1]);
+  this->disable();
+  return false;
+}
+
+bool AdE7953Spi::ade_read_32(uint16_t reg, uint32_t *value) {
+  this->enable();
+  this->write_byte16(reg);
+  this->transfer_byte(0x80);
+  uint8_t recv[4];
+  this->read_array(recv, 4);
+  *value = encode_uint32(recv[0], recv[1], recv[2], recv[3]);
+  this->disable();
+  return false;
+}
+
+}  // namespace ade7953_spi
+}  // namespace esphome

esphome/components/ade7953_spi/ade7953_spi.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+#include "esphome/components/spi/spi.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/ade7953_base/ade7953_base.h"
+
+#include <vector>
+
+namespace esphome {
+namespace ade7953_spi {
+
+class AdE7953Spi : public ade7953_base::ADE7953,
+                   public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_HIGH, spi::CLOCK_PHASE_LEADING,
+                                         spi::DATA_RATE_1MHZ> {
+ public:
+  void setup() override;
+
+  void dump_config() override;
+
+ protected:
+  bool ade_write_8(uint16_t reg, uint8_t value) override;
+  bool ade_write_16(uint16_t reg, uint16_t value) override;
+  bool ade_write_32(uint16_t reg, uint32_t value) override;
+  bool ade_read_8(uint16_t reg, uint8_t *value) override;
+  bool ade_read_16(uint16_t reg, uint16_t *value) override;
+  bool ade_read_32(uint16_t reg, uint32_t *value) override;
+};
+
+}  // namespace ade7953_spi
+}  // namespace esphome

esphome/components/ade7953_spi/sensor.py

@@ -0,0 +1,27 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import spi, ade7953_base
+from esphome.const import CONF_ID
+
+
+DEPENDENCIES = ["spi"]
+AUTO_LOAD = ["ade7953_base"]
+
+ade7953_ns = cg.esphome_ns.namespace("ade7953_spi")
+ADE7953 = ade7953_ns.class_("AdE7953Spi", ade7953_base.ADE7953, spi.SPIDevice)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ADE7953),
+        }
+    )
+    .extend(ade7953_base.ADE7953_CONFIG_SCHEMA)
+    .extend(spi.spi_device_schema())
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await spi.register_spi_device(var, config)
+    await ade7953_base.register_ade7953(var, config)

esphome/components/ads1115/__init__.py

@@ -4,13 +4,14 @@ from esphome.components import i2c
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "voltage_sampler"]
 MULTI_CONF = True
 
 ads1115_ns = cg.esphome_ns.namespace("ads1115")
 ADS1115Component = ads1115_ns.class_("ADS1115Component", cg.Component, i2c.I2CDevice)
 
 CONF_CONTINUOUS_MODE = "continuous_mode"
+CONF_ADS1115_ID = "ads1115_id"
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {

esphome/components/ads1115/ads1115.cpp

@@ -1,6 +1,6 @@
 #include "ads1115.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace ads1115 {
@@ -75,25 +75,19 @@ void ADS1115Component::dump_config() {
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Communication with ADS1115 failed!");
   }
-
-  for (auto *sensor : this->sensors_) {
-    LOG_SENSOR("  ", "Sensor", sensor);
-    ESP_LOGCONFIG(TAG, "    Multiplexer: %u", sensor->get_multiplexer());
-    ESP_LOGCONFIG(TAG, "    Gain: %u", sensor->get_gain());
-    ESP_LOGCONFIG(TAG, "    Resolution: %u", sensor->get_resolution());
-  }
 }
-float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
+float ADS1115Component::request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain,
+                                            ADS1115Resolution resolution) {
   uint16_t config = this->prev_config_;
   // Multiplexer
   //        0bxBBBxxxxxxxxxxxx
   config &= 0b1000111111111111;
-  config |= (sensor->get_multiplexer() & 0b111) << 12;
+  config |= (multiplexer & 0b111) << 12;
 
   // Gain
   //        0bxxxxBBBxxxxxxxxx
   config &= 0b1111000111111111;
-  config |= (sensor->get_gain() & 0b111) << 9;
+  config |= (gain & 0b111) << 9;
 
   if (!this->continuous_mode_) {
     // Start conversion
@@ -132,7 +126,7 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
     return NAN;
   }
 
-  if (sensor->get_resolution() == ADS1015_12_BITS) {
+  if (resolution == ADS1015_12_BITS) {
     bool negative = (raw_conversion >> 15) == 1;
 
     // shift raw_conversion as it's only 12-bits, left justified
@@ -151,8 +145,8 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   auto signed_conversion = static_cast<int16_t>(raw_conversion);
 
   float millivolts;
-  float divider = (sensor->get_resolution() == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
-  switch (sensor->get_gain()) {
+  float divider = (resolution == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
+  switch (gain) {
     case ADS1115_GAIN_6P144:
       millivolts = (signed_conversion * 6144) / divider;
       break;
@@ -179,14 +173,5 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   return millivolts / 1e3f;
 }
 
-float ADS1115Sensor::sample() { return this->parent_->request_measurement(this); }
-void ADS1115Sensor::update() {
-  float v = this->parent_->request_measurement(this);
-  if (!std::isnan(v)) {
-    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
-    this->publish_state(v);
-  }
-}
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/ads1115.h

@@ -1,9 +1,7 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
-#include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/core/component.h"
 
 #include <vector>
 
@@ -35,12 +33,8 @@ enum ADS1115Resolution {
   ADS1015_12_BITS = 12,
 };
 
-class ADS1115Sensor;
-
 class ADS1115Component : public Component, public i2c::I2CDevice {
  public:
-  void register_sensor(ADS1115Sensor *obj) { this->sensors_.push_back(obj); }
-  /// Set up the internal sensor array.
   void setup() override;
   void dump_config() override;
   /// HARDWARE_LATE setup priority
@@ -48,33 +42,12 @@ class ADS1115Component : public Component, public i2c::I2CDevice {
   void set_continuous_mode(bool continuous_mode) { continuous_mode_ = continuous_mode; }
 
   /// Helper method to request a measurement from a sensor.
-  float request_measurement(ADS1115Sensor *sensor);
+  float request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain, ADS1115Resolution resolution);
 
  protected:
-  std::vector<ADS1115Sensor *> sensors_;
   uint16_t prev_config_{0};
   bool continuous_mode_;
 };
 
-/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
-class ADS1115Sensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
- public:
-  ADS1115Sensor(ADS1115Component *parent) : parent_(parent) {}
-  void update() override;
-  void set_multiplexer(ADS1115Multiplexer multiplexer) { multiplexer_ = multiplexer; }
-  void set_gain(ADS1115Gain gain) { gain_ = gain; }
-  void set_resolution(ADS1115Resolution resolution) { resolution_ = resolution; }
-  float sample() override;
-  uint8_t get_multiplexer() const { return multiplexer_; }
-  uint8_t get_gain() const { return gain_; }
-  uint8_t get_resolution() const { return resolution_; }
-
- protected:
-  ADS1115Component *parent_;
-  ADS1115Multiplexer multiplexer_;
-  ADS1115Gain gain_;
-  ADS1115Resolution resolution_;
-};
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/sensor/__init__.py

@@ -10,8 +10,9 @@ from esphome.const import (
     UNIT_VOLT,
     CONF_ID,
 )
-from . import ads1115_ns, ADS1115Component
+from .. import ads1115_ns, ADS1115Component, CONF_ADS1115_ID
 
+AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["ads1115"]
 
 ADS1115Multiplexer = ads1115_ns.enum("ADS1115Multiplexer")
@@ -43,20 +44,10 @@ RESOLUTION = {
 }
 
 
-def validate_gain(value):
-    if isinstance(value, float):
-        value = f"{value:0.03f}"
-    elif not isinstance(value, str):
-        raise cv.Invalid(f'invalid gain "{value}"')
-
-    return cv.enum(GAIN)(value)
-
-
 ADS1115Sensor = ads1115_ns.class_(
     "ADS1115Sensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
 
-CONF_ADS1115_ID = "ads1115_id"
 CONFIG_SCHEMA = (
     sensor.sensor_schema(
         ADS1115Sensor,
@@ -69,7 +60,7 @@ CONFIG_SCHEMA = (
         {
             cv.GenerateID(CONF_ADS1115_ID): cv.use_id(ADS1115Component),
             cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
-            cv.Required(CONF_GAIN): validate_gain,
+            cv.Required(CONF_GAIN): cv.enum(GAIN, string=True),
             cv.Optional(CONF_RESOLUTION, default="16_BITS"): cv.enum(
                 RESOLUTION, upper=True, space="_"
             ),
@@ -80,13 +71,11 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    paren = await cg.get_variable(config[CONF_ADS1115_ID])
-    var = cg.new_Pvariable(config[CONF_ID], paren)
+    var = cg.new_Pvariable(config[CONF_ID])
     await sensor.register_sensor(var, config)
     await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ADS1115_ID])
 
     cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
     cg.add(var.set_gain(config[CONF_GAIN]))
     cg.add(var.set_resolution(config[CONF_RESOLUTION]))
-
-    cg.add(paren.register_sensor(var))

esphome/components/ads1115/sensor/ads1115_sensor.cpp

@@ -0,0 +1,30 @@
+#include "ads1115_sensor.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ads1115 {
+
+static const char *const TAG = "ads1115.sensor";
+
+float ADS1115Sensor::sample() {
+  return this->parent_->request_measurement(this->multiplexer_, this->gain_, this->resolution_);
+}
+
+void ADS1115Sensor::update() {
+  float v = this->sample();
+  if (!std::isnan(v)) {
+    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
+    this->publish_state(v);
+  }
+}
+
+void ADS1115Sensor::dump_config() {
+  LOG_SENSOR("  ", "ADS1115 Sensor", this);
+  ESP_LOGCONFIG(TAG, "    Multiplexer: %u", this->multiplexer_);
+  ESP_LOGCONFIG(TAG, "    Gain: %u", this->gain_);
+  ESP_LOGCONFIG(TAG, "    Resolution: %u", this->resolution_);
+}
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/sensor/ads1115_sensor.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/voltage_sampler/voltage_sampler.h"
+
+#include "../ads1115.h"
+
+namespace esphome {
+namespace ads1115 {
+
+/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
+class ADS1115Sensor : public sensor::Sensor,
+                      public PollingComponent,
+                      public voltage_sampler::VoltageSampler,
+                      public Parented<ADS1115Component> {
+ public:
+  void update() override;
+  void set_multiplexer(ADS1115Multiplexer multiplexer) { this->multiplexer_ = multiplexer; }
+  void set_gain(ADS1115Gain gain) { this->gain_ = gain; }
+  void set_resolution(ADS1115Resolution resolution) { this->resolution_ = resolution; }
+  float sample() override;
+
+  void dump_config() override;
+
+ protected:
+  ADS1115Multiplexer multiplexer_;
+  ADS1115Gain gain_;
+  ADS1115Resolution resolution_;
+};
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1118/__init__.py

@@ -0,0 +1,25 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import spi
+from esphome.const import CONF_ID
+
+CODEOWNERS = ["@solomondg1"]
+DEPENDENCIES = ["spi"]
+MULTI_CONF = True
+
+CONF_ADS1118_ID = "ads1118_id"
+
+ads1118_ns = cg.esphome_ns.namespace("ads1118")
+ADS1118 = ads1118_ns.class_("ADS1118", cg.Component, spi.SPIDevice)
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(ADS1118),
+    }
+).extend(spi.spi_device_schema(cs_pin_required=True))
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await spi.register_spi_device(var, config)

esphome/components/ads1118/ads1118.cpp

@@ -0,0 +1,126 @@
+#include "ads1118.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ads1118 {
+
+static const char *const TAG = "ads1118";
+static const uint8_t ADS1118_DATA_RATE_860_SPS = 0b111;
+
+void ADS1118::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up ads1118");
+  this->spi_setup();
+
+  this->config_ = 0;
+  // Setup multiplexer
+  //        0bx000xxxxxxxxxxxx
+  this->config_ |= ADS1118_MULTIPLEXER_P0_NG << 12;
+
+  // Setup Gain
+  //        0bxxxx000xxxxxxxxx
+  this->config_ |= ADS1118_GAIN_6P144 << 9;
+
+  // Set singleshot mode
+  //        0bxxxxxxx1xxxxxxxx
+  this->config_ |= 0b0000000100000000;
+
+  // Set data rate - 860 samples per second (we're in singleshot mode)
+  //        0bxxxxxxxx100xxxxx
+  this->config_ |= ADS1118_DATA_RATE_860_SPS << 5;
+
+  // Set temperature sensor mode - ADC
+  //        0bxxxxxxxxxxx0xxxx
+  this->config_ |= 0b0000000000000000;
+
+  // Set DOUT pull up - enable
+  //        0bxxxxxxxxxxxx0xxx
+  this->config_ |= 0b0000000000001000;
+
+  // NOP - must be 01
+  //        0bxxxxxxxxxxxxx01x
+  this->config_ |= 0b0000000000000010;
+
+  // Not used - can be 0 or 1, lets be positive
+  //        0bxxxxxxxxxxxxxxx1
+  this->config_ |= 0b0000000000000001;
+}
+
+void ADS1118::dump_config() {
+  ESP_LOGCONFIG(TAG, "ADS1118:");
+  LOG_PIN("  CS Pin:", this->cs_);
+}
+
+float ADS1118::request_measurement(ADS1118Multiplexer multiplexer, ADS1118Gain gain, bool temperature_mode) {
+  uint16_t temp_config = this->config_;
+  // Multiplexer
+  //        0bxBBBxxxxxxxxxxxx
+  temp_config &= 0b1000111111111111;
+  temp_config |= (multiplexer & 0b111) << 12;
+
+  // Gain
+  //        0bxxxxBBBxxxxxxxxx
+  temp_config &= 0b1111000111111111;
+  temp_config |= (gain & 0b111) << 9;
+
+  if (temperature_mode) {
+    // Set temperature sensor mode
+    //        0bxxxxxxxxxxx1xxxx
+    temp_config |= 0b0000000000010000;
+  } else {
+    // Set ADC mode
+    //        0bxxxxxxxxxxx0xxxx
+    temp_config &= 0b1111111111101111;
+  }
+
+  // Start conversion
+  temp_config |= 0b1000000000000000;
+
+  this->enable();
+  this->write_byte16(temp_config);
+  this->disable();
+
+  // about 1.2 ms with 860 samples per second
+  delay(2);
+
+  this->enable();
+  uint8_t adc_first_byte = this->read_byte();
+  uint8_t adc_second_byte = this->read_byte();
+  this->disable();
+  uint16_t raw_conversion = encode_uint16(adc_first_byte, adc_second_byte);
+
+  auto signed_conversion = static_cast<int16_t>(raw_conversion);
+
+  if (temperature_mode) {
+    return (signed_conversion >> 2) * 0.03125f;
+  } else {
+    float millivolts;
+    float divider = 32768.0f;
+    switch (gain) {
+      case ADS1118_GAIN_6P144:
+        millivolts = (signed_conversion * 6144) / divider;
+        break;
+      case ADS1118_GAIN_4P096:
+        millivolts = (signed_conversion * 4096) / divider;
+        break;
+      case ADS1118_GAIN_2P048:
+        millivolts = (signed_conversion * 2048) / divider;
+        break;
+      case ADS1118_GAIN_1P024:
+        millivolts = (signed_conversion * 1024) / divider;
+        break;
+      case ADS1118_GAIN_0P512:
+        millivolts = (signed_conversion * 512) / divider;
+        break;
+      case ADS1118_GAIN_0P256:
+        millivolts = (signed_conversion * 256) / divider;
+        break;
+      default:
+        millivolts = NAN;
+    }
+
+    return millivolts / 1e3f;
+  }
+}
+
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/ads1118.h

@@ -0,0 +1,46 @@
+#pragma once
+
+#include "esphome/components/spi/spi.h"
+#include "esphome/core/component.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace ads1118 {
+
+enum ADS1118Multiplexer {
+  ADS1118_MULTIPLEXER_P0_N1 = 0b000,
+  ADS1118_MULTIPLEXER_P0_N3 = 0b001,
+  ADS1118_MULTIPLEXER_P1_N3 = 0b010,
+  ADS1118_MULTIPLEXER_P2_N3 = 0b011,
+  ADS1118_MULTIPLEXER_P0_NG = 0b100,
+  ADS1118_MULTIPLEXER_P1_NG = 0b101,
+  ADS1118_MULTIPLEXER_P2_NG = 0b110,
+  ADS1118_MULTIPLEXER_P3_NG = 0b111,
+};
+
+enum ADS1118Gain {
+  ADS1118_GAIN_6P144 = 0b000,
+  ADS1118_GAIN_4P096 = 0b001,
+  ADS1118_GAIN_2P048 = 0b010,
+  ADS1118_GAIN_1P024 = 0b011,
+  ADS1118_GAIN_0P512 = 0b100,
+  ADS1118_GAIN_0P256 = 0b101,
+};
+
+class ADS1118 : public Component,
+                public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_TRAILING,
+                                      spi::DATA_RATE_1MHZ> {
+ public:
+  ADS1118() = default;
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+  /// Helper method to request a measurement from a sensor.
+  float request_measurement(ADS1118Multiplexer multiplexer, ADS1118Gain gain, bool temperature_mode);
+
+ protected:
+  uint16_t config_{0};
+};
+
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/sensor/__init__.py

@@ -0,0 +1,97 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, voltage_sampler
+from esphome.const import (
+    CONF_GAIN,
+    CONF_MULTIPLEXER,
+    DEVICE_CLASS_VOLTAGE,
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_VOLT,
+    CONF_TYPE,
+)
+from .. import ads1118_ns, ADS1118, CONF_ADS1118_ID
+
+AUTO_LOAD = ["voltage_sampler"]
+DEPENDENCIES = ["ads1118"]
+
+ADS1118Multiplexer = ads1118_ns.enum("ADS1118Multiplexer")
+MUX = {
+    "A0_A1": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P0_N1,
+    "A0_A3": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P0_N3,
+    "A1_A3": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P1_N3,
+    "A2_A3": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P2_N3,
+    "A0_GND": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P0_NG,
+    "A1_GND": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P1_NG,
+    "A2_GND": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P2_NG,
+    "A3_GND": ADS1118Multiplexer.ADS1118_MULTIPLEXER_P3_NG,
+}
+
+ADS1118Gain = ads1118_ns.enum("ADS1118Gain")
+GAIN = {
+    "6.144": ADS1118Gain.ADS1118_GAIN_6P144,
+    "4.096": ADS1118Gain.ADS1118_GAIN_4P096,
+    "2.048": ADS1118Gain.ADS1118_GAIN_2P048,
+    "1.024": ADS1118Gain.ADS1118_GAIN_1P024,
+    "0.512": ADS1118Gain.ADS1118_GAIN_0P512,
+    "0.256": ADS1118Gain.ADS1118_GAIN_0P256,
+}
+
+
+ADS1118Sensor = ads1118_ns.class_(
+    "ADS1118Sensor",
+    cg.PollingComponent,
+    sensor.Sensor,
+    voltage_sampler.VoltageSampler,
+    cg.Parented.template(ADS1118),
+)
+
+TYPE_ADC = "adc"
+TYPE_TEMPERATURE = "temperature"
+
+CONFIG_SCHEMA = cv.typed_schema(
+    {
+        TYPE_ADC: sensor.sensor_schema(
+            ADS1118Sensor,
+            unit_of_measurement=UNIT_VOLT,
+            accuracy_decimals=3,
+            device_class=DEVICE_CLASS_VOLTAGE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        )
+        .extend(
+            {
+                cv.GenerateID(CONF_ADS1118_ID): cv.use_id(ADS1118),
+                cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
+                cv.Required(CONF_GAIN): cv.enum(GAIN, string=True),
+            }
+        )
+        .extend(cv.polling_component_schema("60s")),
+        TYPE_TEMPERATURE: sensor.sensor_schema(
+            ADS1118Sensor,
+            unit_of_measurement=UNIT_CELSIUS,
+            accuracy_decimals=2,
+            device_class=DEVICE_CLASS_TEMPERATURE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        )
+        .extend(
+            {
+                cv.GenerateID(CONF_ADS1118_ID): cv.use_id(ADS1118),
+            }
+        )
+        .extend(cv.polling_component_schema("60s")),
+    },
+    default_type=TYPE_ADC,
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ADS1118_ID])
+
+    if config[CONF_TYPE] == TYPE_ADC:
+        cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
+        cg.add(var.set_gain(config[CONF_GAIN]))
+    if config[CONF_TYPE] == TYPE_TEMPERATURE:
+        cg.add(var.set_temperature_mode(True))

esphome/components/ads1118/sensor/ads1118_sensor.cpp

@@ -0,0 +1,29 @@
+#include "ads1118_sensor.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ads1118 {
+
+static const char *const TAG = "ads1118.sensor";
+
+void ADS1118Sensor::dump_config() {
+  LOG_SENSOR("  ", "ADS1118 Sensor", this);
+  ESP_LOGCONFIG(TAG, "    Multiplexer: %u", this->multiplexer_);
+  ESP_LOGCONFIG(TAG, "    Gain: %u", this->gain_);
+}
+
+float ADS1118Sensor::sample() {
+  return this->parent_->request_measurement(this->multiplexer_, this->gain_, this->temperature_mode_);
+}
+
+void ADS1118Sensor::update() {
+  float v = this->sample();
+  if (!std::isnan(v)) {
+    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
+    this->publish_state(v);
+  }
+}
+
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ads1118/sensor/ads1118_sensor.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/voltage_sampler/voltage_sampler.h"
+
+#include "../ads1118.h"
+
+namespace esphome {
+namespace ads1118 {
+
+class ADS1118Sensor : public PollingComponent,
+                      public sensor::Sensor,
+                      public voltage_sampler::VoltageSampler,
+                      public Parented<ADS1118> {
+ public:
+  void update() override;
+
+  void set_multiplexer(ADS1118Multiplexer multiplexer) { this->multiplexer_ = multiplexer; }
+  void set_gain(ADS1118Gain gain) { this->gain_ = gain; }
+  void set_temperature_mode(bool temp) { this->temperature_mode_ = temp; }
+
+  float sample() override;
+
+  void dump_config() override;
+
+ protected:
+  ADS1118Multiplexer multiplexer_{ADS1118_MULTIPLEXER_P0_NG};
+  ADS1118Gain gain_{ADS1118_GAIN_6P144};
+  bool temperature_mode_;
+};
+
+}  // namespace ads1118
+}  // namespace esphome

esphome/components/ags10/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@mak-42"]

esphome/components/ags10/ags10.cpp

@@ -0,0 +1,214 @@
+#include "ags10.h"
+
+#include <cinttypes>
+
+namespace esphome {
+namespace ags10 {
+static const char *const TAG = "ags10";
+
+// Data acquisition.
+static const uint8_t REG_TVOC = 0x00;
+// Zero-point calibration.
+static const uint8_t REG_CALIBRATION = 0x01;
+// Read version.
+static const uint8_t REG_VERSION = 0x11;
+// Read current resistance.
+static const uint8_t REG_RESISTANCE = 0x20;
+// Modify target address.
+static const uint8_t REG_ADDRESS = 0x21;
+
+// Zero-point calibration with current resistance.
+static const uint16_t ZP_CURRENT = 0x0000;
+// Zero-point reset.
+static const uint16_t ZP_DEFAULT = 0xFFFF;
+
+void AGS10Component::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up ags10...");
+
+  auto version = this->read_version_();
+  if (version) {
+    ESP_LOGD(TAG, "AGS10 Sensor Version: 0x%02X", *version);
+    if (this->version_ != nullptr) {
+      this->version_->publish_state(*version);
+    }
+  } else {
+    ESP_LOGE(TAG, "AGS10 Sensor Version: unknown");
+  }
+
+  auto resistance = this->read_resistance_();
+  if (resistance) {
+    ESP_LOGD(TAG, "AGS10 Sensor Resistance: 0x%08" PRIX32, *resistance);
+    if (this->resistance_ != nullptr) {
+      this->resistance_->publish_state(*resistance);
+    }
+  } else {
+    ESP_LOGE(TAG, "AGS10 Sensor Resistance: unknown");
+  }
+
+  ESP_LOGD(TAG, "Sensor initialized");
+}
+
+void AGS10Component::update() {
+  auto tvoc = this->read_tvoc_();
+  if (tvoc) {
+    this->tvoc_->publish_state(*tvoc);
+    this->status_clear_warning();
+  } else {
+    this->status_set_warning();
+  }
+}
+
+void AGS10Component::dump_config() {
+  ESP_LOGCONFIG(TAG, "AGS10:");
+  LOG_I2C_DEVICE(this);
+  switch (this->error_code_) {
+    case NONE:
+      break;
+    case COMMUNICATION_FAILED:
+      ESP_LOGE(TAG, "Communication with AGS10 failed!");
+      break;
+    case CRC_CHECK_FAILED:
+      ESP_LOGE(TAG, "The crc check failed");
+      break;
+    case ILLEGAL_STATUS:
+      ESP_LOGE(TAG, "AGS10 is not ready to return TVOC data or sensor in pre-heat stage.");
+      break;
+    case UNSUPPORTED_UNITS:
+      ESP_LOGE(TAG, "AGS10 returns TVOC data in unsupported units.");
+      break;
+    default:
+      ESP_LOGE(TAG, "Unknown error: %d", this->error_code_);
+      break;
+  }
+  LOG_UPDATE_INTERVAL(this);
+  LOG_SENSOR("  ", "TVOC Sensor", this->tvoc_);
+  LOG_SENSOR("  ", "Firmware Version Sensor", this->version_);
+  LOG_SENSOR("  ", "Resistance Sensor", this->resistance_);
+}
+
+/**
+ * Sets new I2C address of AGS10.
+ */
+bool AGS10Component::new_i2c_address(uint8_t newaddress) {
+  uint8_t rev_newaddress = ~newaddress;
+  std::array<uint8_t, 5> data{newaddress, rev_newaddress, newaddress, rev_newaddress, 0};
+  data[4] = calc_crc8_(data, 4);
+  if (!this->write_bytes(REG_ADDRESS, data)) {
+    this->error_code_ = COMMUNICATION_FAILED;
+    this->status_set_warning();
+    ESP_LOGE(TAG, "couldn't write the new I2C address 0x%02X", newaddress);
+    return false;
+  }
+  this->set_i2c_address(newaddress);
+  ESP_LOGW(TAG, "changed I2C address to 0x%02X", newaddress);
+  this->error_code_ = NONE;
+  this->status_clear_warning();
+  return true;
+}
+
+bool AGS10Component::set_zero_point_with_factory_defaults() { return this->set_zero_point_with(ZP_DEFAULT); }
+
+bool AGS10Component::set_zero_point_with_current_resistance() { return this->set_zero_point_with(ZP_CURRENT); }
+
+bool AGS10Component::set_zero_point_with(uint16_t value) {
+  std::array<uint8_t, 5> data{0x00, 0x0C, (uint8_t) ((value >> 8) & 0xFF), (uint8_t) (value & 0xFF), 0};
+  data[4] = calc_crc8_(data, 4);
+  if (!this->write_bytes(REG_CALIBRATION, data)) {
+    this->error_code_ = COMMUNICATION_FAILED;
+    this->status_set_warning();
+    ESP_LOGE(TAG, "unable to set zero-point calibration with 0x%02X", value);
+    return false;
+  }
+  if (value == ZP_CURRENT) {
+    ESP_LOGI(TAG, "zero-point calibration has been set with current resistance");
+  } else if (value == ZP_DEFAULT) {
+    ESP_LOGI(TAG, "zero-point calibration has been reset to the factory defaults");
+  } else {
+    ESP_LOGI(TAG, "zero-point calibration has been set with 0x%02X", value);
+  }
+  this->error_code_ = NONE;
+  this->status_clear_warning();
+  return true;
+}
+
+optional<uint32_t> AGS10Component::read_tvoc_() {
+  auto data = this->read_and_check_<5>(REG_TVOC);
+  if (!data) {
+    return nullopt;
+  }
+
+  auto res = *data;
+  auto status_byte = res[0];
+
+  int units = status_byte & 0x0e;
+  int status_bit = status_byte & 0x01;
+
+  if (status_bit != 0) {
+    this->error_code_ = ILLEGAL_STATUS;
+    ESP_LOGW(TAG, "Reading AGS10 data failed: illegal status (not ready or sensor in pre-heat stage)!");
+    return nullopt;
+  }
+
+  if (units != 0) {
+    this->error_code_ = UNSUPPORTED_UNITS;
+    ESP_LOGE(TAG, "Reading AGS10 data failed: unsupported units (%d)!", units);
+    return nullopt;
+  }
+
+  return encode_uint24(res[1], res[2], res[3]);
+}
+
+optional<uint8_t> AGS10Component::read_version_() {
+  auto data = this->read_and_check_<5>(REG_VERSION);
+  if (data) {
+    auto res = *data;
+    return res[3];
+  }
+  return nullopt;
+}
+
+optional<uint32_t> AGS10Component::read_resistance_() {
+  auto data = this->read_and_check_<5>(REG_RESISTANCE);
+  if (data) {
+    auto res = *data;
+    return encode_uint32(res[0], res[1], res[2], res[3]);
+  }
+  return nullopt;
+}
+
+template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_check_(uint8_t a_register) {
+  auto data = this->read_bytes<N>(a_register);
+  if (!data.has_value()) {
+    this->error_code_ = COMMUNICATION_FAILED;
+    ESP_LOGE(TAG, "Reading AGS10 version failed!");
+    return optional<std::array<uint8_t, N>>();
+  }
+  auto len = N - 1;
+  auto res = *data;
+  auto crc_byte = res[len];
+
+  if (crc_byte != calc_crc8_(res, len)) {
+    this->error_code_ = CRC_CHECK_FAILED;
+    ESP_LOGE(TAG, "Reading AGS10 version failed: crc error!");
+    return optional<std::array<uint8_t, N>>();
+  }
+
+  return data;
+}
+
+template<size_t N> uint8_t AGS10Component::calc_crc8_(std::array<uint8_t, N> dat, uint8_t num) {
+  uint8_t i, byte1, crc = 0xFF;
+  for (byte1 = 0; byte1 < num; byte1++) {
+    crc ^= (dat[byte1]);
+    for (i = 0; i < 8; i++) {
+      if (crc & 0x80) {
+        crc = (crc << 1) ^ 0x31;
+      } else {
+        crc = (crc << 1);
+      }
+    }
+  }
+  return crc;
+}
+}  // namespace ags10
+}  // namespace esphome

esphome/components/ags10/ags10.h

@@ -0,0 +1,152 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace ags10 {
+
+class AGS10Component : public PollingComponent, public i2c::I2CDevice {
+ public:
+  /**
+   * Sets TVOC sensor.
+   */
+  void set_tvoc(sensor::Sensor *tvoc) { this->tvoc_ = tvoc; }
+
+  /**
+   * Sets version info sensor.
+   */
+  void set_version(sensor::Sensor *version) { this->version_ = version; }
+
+  /**
+   * Sets resistance info sensor.
+   */
+  void set_resistance(sensor::Sensor *resistance) { this->resistance_ = resistance; }
+
+  void setup() override;
+
+  void update() override;
+
+  void dump_config() override;
+
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+  /**
+   * Modifies target address of AGS10.
+   *
+   * New address is saved and takes effect immediately even after power-off.
+   */
+  bool new_i2c_address(uint8_t newaddress);
+
+  /**
+   * Sets zero-point with factory defaults.
+   */
+  bool set_zero_point_with_factory_defaults();
+
+  /**
+   * Sets zero-point with current sensor resistance.
+   */
+  bool set_zero_point_with_current_resistance();
+
+  /**
+   * Sets zero-point with the value.
+   */
+  bool set_zero_point_with(uint16_t value);
+
+ protected:
+  /**
+   *  TVOC.
+   */
+  sensor::Sensor *tvoc_{nullptr};
+
+  /**
+   * Firmvare version.
+   */
+  sensor::Sensor *version_{nullptr};
+
+  /**
+   * Resistance.
+   */
+  sensor::Sensor *resistance_{nullptr};
+
+  /**
+   *  Last operation error code.
+   */
+  enum ErrorCode {
+    NONE = 0,
+    COMMUNICATION_FAILED,
+    CRC_CHECK_FAILED,
+    ILLEGAL_STATUS,
+    UNSUPPORTED_UNITS,
+  } error_code_{NONE};
+
+  /**
+   *  Reads and returns value of TVOC.
+   */
+  optional<uint32_t> read_tvoc_();
+
+  /**
+   *  Reads and returns a firmware version of AGS10.
+   */
+  optional<uint8_t> read_version_();
+
+  /**
+   * Reads and returns the resistance of AGS10.
+   */
+  optional<uint32_t> read_resistance_();
+
+  /**
+   * Read, checks and returns data from the sensor.
+   */
+  template<size_t N> optional<std::array<uint8_t, N>> read_and_check_(uint8_t a_register);
+
+  /**
+   * Calculates CRC8 value.
+   *
+   * CRC8 calculation, initial value: 0xFF, polynomial: 0x31 (x8+ x5+ x4+1)
+   *
+   * @param[in] dat the data buffer
+   * @param num number of bytes in the buffer
+   */
+  template<size_t N> uint8_t calc_crc8_(std::array<uint8_t, N> dat, uint8_t num);
+};
+
+template<typename... Ts> class AGS10NewI2cAddressAction : public Action<Ts...>, public Parented<AGS10Component> {
+ public:
+  TEMPLATABLE_VALUE(uint8_t, new_address)
+
+  void play(Ts... x) override { this->parent_->new_i2c_address(this->new_address_.value(x...)); }
+};
+
+enum AGS10SetZeroPointActionMode {
+  // Zero-point reset.
+  FACTORY_DEFAULT,
+  // Zero-point calibration with current resistance.
+  CURRENT_VALUE,
+  // Zero-point calibration with custom resistance.
+  CUSTOM_VALUE,
+};
+
+template<typename... Ts> class AGS10SetZeroPointAction : public Action<Ts...>, public Parented<AGS10Component> {
+ public:
+  TEMPLATABLE_VALUE(uint16_t, value)
+  TEMPLATABLE_VALUE(AGS10SetZeroPointActionMode, mode)
+
+  void play(Ts... x) override {
+    switch (this->mode_.value(x...)) {
+      case FACTORY_DEFAULT:
+        this->parent_->set_zero_point_with_factory_defaults();
+        break;
+      case CURRENT_VALUE:
+        this->parent_->set_zero_point_with_current_resistance();
+        break;
+      case CUSTOM_VALUE:
+        this->parent_->set_zero_point_with(this->value_.value(x...));
+        break;
+    }
+  }
+};
+}  // namespace ags10
+}  // namespace esphome

esphome/components/ags10/sensor.py

@@ -0,0 +1,132 @@
+import esphome.codegen as cg
+from esphome import automation
+import esphome.config_validation as cv
+from esphome.components import i2c, sensor
+from esphome.const import (
+    CONF_ID,
+    ICON_RADIATOR,
+    ICON_RESTART,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+    ENTITY_CATEGORY_DIAGNOSTIC,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_OHM,
+    UNIT_PARTS_PER_BILLION,
+    CONF_ADDRESS,
+    CONF_TVOC,
+    CONF_VERSION,
+    CONF_MODE,
+    CONF_VALUE,
+)
+
+CONF_RESISTANCE = "resistance"
+
+DEPENDENCIES = ["i2c"]
+
+ags10_ns = cg.esphome_ns.namespace("ags10")
+AGS10Component = ags10_ns.class_("AGS10Component", cg.PollingComponent, i2c.I2CDevice)
+
+# Actions
+AGS10NewI2cAddressAction = ags10_ns.class_(
+    "AGS10NewI2cAddressAction", automation.Action
+)
+AGS10SetZeroPointAction = ags10_ns.class_("AGS10SetZeroPointAction", automation.Action)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AGS10Component),
+            cv.Optional(CONF_TVOC): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_BILLION,
+                icon=ICON_RADIATOR,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_VERSION): sensor.sensor_schema(
+                icon=ICON_RESTART,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+            cv.Optional(CONF_RESISTANCE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_OHM,
+                icon=ICON_RESTART,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x1A))
+)
+
+FINAL_VALIDATE_SCHEMA = i2c.final_validate_device_schema("ags10", max_frequency="15khz")
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    sens = await sensor.new_sensor(config[CONF_TVOC])
+    cg.add(var.set_tvoc(sens))
+
+    if version_config := config.get(CONF_VERSION):
+        sens = await sensor.new_sensor(version_config)
+        cg.add(var.set_version(sens))
+
+    if resistance_config := config.get(CONF_RESISTANCE):
+        sens = await sensor.new_sensor(resistance_config)
+        cg.add(var.set_resistance(sens))
+
+
+AGS10_NEW_I2C_ADDRESS_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AGS10Component),
+        cv.Required(CONF_ADDRESS): cv.templatable(cv.i2c_address),
+    },
+    key=CONF_ADDRESS,
+)
+
+
+@automation.register_action(
+    "ags10.new_i2c_address",
+    AGS10NewI2cAddressAction,
+    AGS10_NEW_I2C_ADDRESS_SCHEMA,
+)
+async def ags10newi2caddress_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    address = await cg.templatable(config[CONF_ADDRESS], args, int)
+    cg.add(var.set_new_address(address))
+    return var
+
+
+AGS10SetZeroPointActionMode = ags10_ns.enum("AGS10SetZeroPointActionMode")
+AGS10_SET_ZERO_POINT_ACTION_MODE = {
+    "FACTORY_DEFAULT": AGS10SetZeroPointActionMode.FACTORY_DEFAULT,
+    "CURRENT_VALUE": AGS10SetZeroPointActionMode.CURRENT_VALUE,
+    "CUSTOM_VALUE": AGS10SetZeroPointActionMode.CUSTOM_VALUE,
+}
+
+AGS10_SET_ZERO_POINT_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.use_id(AGS10Component),
+        cv.Required(CONF_MODE): cv.enum(AGS10_SET_ZERO_POINT_ACTION_MODE, upper=True),
+        cv.Optional(CONF_VALUE, default=0xFFFF): cv.templatable(cv.uint16_t),
+    },
+)
+
+
+@automation.register_action(
+    "ags10.set_zero_point",
+    AGS10SetZeroPointAction,
+    AGS10_SET_ZERO_POINT_SCHEMA,
+)
+async def ags10setzeropoint_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    await cg.register_parented(var, config[CONF_ID])
+    mode = await cg.templatable(config.get(CONF_MODE), args, enumerate)
+    cg.add(var.set_mode(mode))
+    value = await cg.templatable(config[CONF_VALUE], args, int)
+    cg.add(var.set_value(value))
+    return var

esphome/components/aht10/aht10.cpp

@@ -20,114 +20,140 @@ namespace esphome {
 namespace aht10 {
 
 static const char *const TAG = "aht10";
-static const uint8_t AHT10_CALIBRATE_CMD[] = {0xE1};
+static const uint8_t AHT10_INITIALIZE_CMD[] = {0xE1, 0x08, 0x00};
+static const uint8_t AHT20_INITIALIZE_CMD[] = {0xBE, 0x08, 0x00};
 static const uint8_t AHT10_MEASURE_CMD[] = {0xAC, 0x33, 0x00};
-static const uint8_t AHT10_DEFAULT_DELAY = 5;    // ms, for calibration and temperature measurement
-static const uint8_t AHT10_HUMIDITY_DELAY = 30;  // ms
-static const uint8_t AHT10_ATTEMPTS = 3;         // safety margin, normally 3 attempts are enough: 3*30=90ms
+static const uint8_t AHT10_SOFTRESET_CMD[] = {0xBA};
+
+static const uint8_t AHT10_DEFAULT_DELAY = 5;     // ms, for initialization and temperature measurement
+static const uint8_t AHT10_READ_DELAY = 80;       // ms, time to wait for conversion result
+static const uint8_t AHT10_SOFTRESET_DELAY = 30;  // ms
+
+static const uint8_t AHT10_ATTEMPTS = 3;  // safety margin, normally 3 attempts are enough: 3*30=90ms
+static const uint8_t AHT10_INIT_ATTEMPTS = 10;
+
+static const uint8_t AHT10_STATUS_BUSY = 0x80;
 
 void AHT10Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up AHT10...");
+  if (this->write(AHT10_SOFTRESET_CMD, sizeof(AHT10_SOFTRESET_CMD)) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Reset AHT10 failed!");
+  }
+  delay(AHT10_SOFTRESET_DELAY);
 
-  if (!this->write_bytes(0, AHT10_CALIBRATE_CMD, sizeof(AHT10_CALIBRATE_CMD))) {
+  i2c::ErrorCode error_code = i2c::ERROR_INVALID_ARGUMENT;
+  switch (this->variant_) {
+    case AHT10Variant::AHT20:
+      ESP_LOGCONFIG(TAG, "Setting up AHT20");
+      error_code = this->write(AHT20_INITIALIZE_CMD, sizeof(AHT20_INITIALIZE_CMD));
+      break;
+    case AHT10Variant::AHT10:
+      ESP_LOGCONFIG(TAG, "Setting up AHT10");
+      error_code = this->write(AHT10_INITIALIZE_CMD, sizeof(AHT10_INITIALIZE_CMD));
+      break;
+  }
+  if (error_code != i2c::ERROR_OK) {
     ESP_LOGE(TAG, "Communication with AHT10 failed!");
     this->mark_failed();
     return;
   }
-  uint8_t data = 0;
-  if (this->write(&data, 1) != i2c::ERROR_OK) {
-    ESP_LOGD(TAG, "Communication with AHT10 failed!");
-    this->mark_failed();
-    return;
-  }
-  delay(AHT10_DEFAULT_DELAY);
-  if (this->read(&data, 1) != i2c::ERROR_OK) {
-    ESP_LOGD(TAG, "Communication with AHT10 failed!");
-    this->mark_failed();
-    return;
-  }
-  if (this->read(&data, 1) != i2c::ERROR_OK) {
-    ESP_LOGD(TAG, "Communication with AHT10 failed!");
-    this->mark_failed();
-    return;
+  uint8_t data = AHT10_STATUS_BUSY;
+  int cal_attempts = 0;
+  while (data & AHT10_STATUS_BUSY) {
+    delay(AHT10_DEFAULT_DELAY);
+    if (this->read(&data, 1) != i2c::ERROR_OK) {
+      ESP_LOGE(TAG, "Communication with AHT10 failed!");
+      this->mark_failed();
+      return;
+    }
+    ++cal_attempts;
+    if (cal_attempts > AHT10_INIT_ATTEMPTS) {
+      ESP_LOGE(TAG, "AHT10 initialization timed out!");
+      this->mark_failed();
+      return;
+    }
   }
   if ((data & 0x68) != 0x08) {  // Bit[6:5] = 0b00, NORMAL mode and Bit[3] = 0b1, CALIBRATED
-    ESP_LOGE(TAG, "AHT10 calibration failed!");
+    ESP_LOGE(TAG, "AHT10 initialization failed!");
     this->mark_failed();
     return;
   }
 
-  ESP_LOGV(TAG, "AHT10 calibrated");
+  ESP_LOGV(TAG, "AHT10 initialization");
 }
 
-void AHT10Component::update() {
-  if (!this->write_bytes(0, AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD))) {
-    ESP_LOGE(TAG, "Communication with AHT10 failed!");
-    this->status_set_warning();
+void AHT10Component::restart_read_() {
+  if (this->read_count_ == AHT10_ATTEMPTS) {
+    this->read_count_ = 0;
+    this->status_set_error("Measurements reading timed-out!");
     return;
   }
+  this->read_count_++;
+  this->set_timeout(AHT10_READ_DELAY, [this]() { this->read_data_(); });
+}
+
+void AHT10Component::read_data_() {
   uint8_t data[6];
-  uint8_t delay_ms = AHT10_DEFAULT_DELAY;
-  if (this->humidity_sensor_ != nullptr)
-    delay_ms = AHT10_HUMIDITY_DELAY;
-  bool success = false;
-  for (int i = 0; i < AHT10_ATTEMPTS; ++i) {
-    ESP_LOGVV(TAG, "Attempt %d at %6u", i, millis());
-    delay(delay_ms);
-    if (this->read(data, 6) != i2c::ERROR_OK) {
-      ESP_LOGD(TAG, "Communication with AHT10 failed, waiting...");
-      continue;
-    }
-
-    if ((data[0] & 0x80) == 0x80) {  // Bit[7] = 0b1, device is busy
-      ESP_LOGD(TAG, "AHT10 is busy, waiting...");
-    } else if (data[1] == 0x0 && data[2] == 0x0 && (data[3] >> 4) == 0x0) {
-      // Unrealistic humidity (0x0)
-      if (this->humidity_sensor_ == nullptr) {
-        ESP_LOGVV(TAG, "ATH10 Unrealistic humidity (0x0), but humidity is not required");
-        break;
-      } else {
-        ESP_LOGD(TAG, "ATH10 Unrealistic humidity (0x0), retrying...");
-        if (!this->write_bytes(0, AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD))) {
-          ESP_LOGE(TAG, "Communication with AHT10 failed!");
-          this->status_set_warning();
-          return;
-        }
-      }
-    } else {
-      // data is valid, we can break the loop
-      ESP_LOGVV(TAG, "Answer at %6u", millis());
-      success = true;
-      break;
-    }
+  if (this->read_count_ > 1) {
+    ESP_LOGD(TAG, "Read attempt %d at %ums", this->read_count_, (unsigned) (millis() - this->start_time_));
   }
-  if (!success || (data[0] & 0x80) == 0x80) {
-    ESP_LOGE(TAG, "Measurements reading timed-out!");
-    this->status_set_warning();
+  if (this->read(data, 6) != i2c::ERROR_OK) {
+    this->status_set_warning("AHT10 read failed, retrying soon");
+    this->restart_read_();
     return;
   }
 
+  if ((data[0] & 0x80) == 0x80) {  // Bit[7] = 0b1, device is busy
+    ESP_LOGD(TAG, "AHT10 is busy, waiting...");
+    this->restart_read_();
+    return;
+  }
+  if (data[1] == 0x0 && data[2] == 0x0 && (data[3] >> 4) == 0x0) {
+    // Unrealistic humidity (0x0)
+    if (this->humidity_sensor_ == nullptr) {
+      ESP_LOGV(TAG, "ATH10 Unrealistic humidity (0x0), but humidity is not required");
+    } else {
+      ESP_LOGD(TAG, "ATH10 Unrealistic humidity (0x0), retrying...");
+      if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
+        this->status_set_warning("Communication with AHT10 failed!");
+      }
+      this->restart_read_();
+      return;
+    }
+  }
+  if (this->read_count_ > 1) {
+    ESP_LOGD(TAG, "Success at %ums", (unsigned) (millis() - this->start_time_));
+  }
   uint32_t raw_temperature = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5];
   uint32_t raw_humidity = ((data[1] << 16) | (data[2] << 8) | data[3]) >> 4;
 
-  float temperature = ((200.0f * (float) raw_temperature) / 1048576.0f) - 50.0f;
-  float humidity;
-  if (raw_humidity == 0) {  // unrealistic value
-    humidity = NAN;
-  } else {
-    humidity = (float) raw_humidity * 100.0f / 1048576.0f;
-  }
-
   if (this->temperature_sensor_ != nullptr) {
+    float temperature = ((200.0f * (float) raw_temperature) / 1048576.0f) - 50.0f;
     this->temperature_sensor_->publish_state(temperature);
   }
   if (this->humidity_sensor_ != nullptr) {
+    float humidity;
+    if (raw_humidity == 0) {  // unrealistic value
+      humidity = NAN;
+    } else {
+      humidity = (float) raw_humidity * 100.0f / 1048576.0f;
+    }
     if (std::isnan(humidity)) {
       ESP_LOGW(TAG, "Invalid humidity! Sensor reported 0%% Hum");
     }
     this->humidity_sensor_->publish_state(humidity);
   }
   this->status_clear_warning();
+  this->read_count_ = 0;
+}
+void AHT10Component::update() {
+  if (this->read_count_ != 0)
+    return;
+  this->start_time_ = millis();
+  if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
+    this->status_set_warning("Communication with AHT10 failed!");
+    return;
+  }
+  this->restart_read_();
 }
 
 float AHT10Component::get_setup_priority() const { return setup_priority::DATA; }

esphome/components/aht10/aht10.h

@@ -1,5 +1,7 @@
 #pragma once
 
+#include <utility>
+
 #include "esphome/core/component.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
@@ -7,12 +9,15 @@
 namespace esphome {
 namespace aht10 {
 
+enum AHT10Variant { AHT10, AHT20 };
+
 class AHT10Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void update() override;
   void dump_config() override;
   float get_setup_priority() const override;
+  void set_variant(AHT10Variant variant) { this->variant_ = variant; }
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
   void set_humidity_sensor(sensor::Sensor *humidity_sensor) { humidity_sensor_ = humidity_sensor; }
@@ -20,6 +25,11 @@ class AHT10Component : public PollingComponent, public i2c::I2CDevice {
  protected:
   sensor::Sensor *temperature_sensor_{nullptr};
   sensor::Sensor *humidity_sensor_{nullptr};
+  AHT10Variant variant_{};
+  unsigned read_count_{};
+  void read_data_();
+  void restart_read_();
+  uint32_t start_time_{};
 };
 
 }  // namespace aht10

esphome/components/aht10/sensor.py

@@ -10,6 +10,7 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_PERCENT,
+    CONF_VARIANT,
 )
 
 DEPENDENCIES = ["i2c"]
@@ -17,6 +18,12 @@ DEPENDENCIES = ["i2c"]
 aht10_ns = cg.esphome_ns.namespace("aht10")
 AHT10Component = aht10_ns.class_("AHT10Component", cg.PollingComponent, i2c.I2CDevice)
 
+AHT10Variant = aht10_ns.enum("AHT10Variant")
+AHT10_VARIANTS = {
+    "AHT10": AHT10Variant.AHT10,
+    "AHT20": AHT10Variant.AHT20,
+}
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {
@@ -33,6 +40,9 @@ CONFIG_SCHEMA = (
                 device_class=DEVICE_CLASS_HUMIDITY,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
+            cv.Optional(CONF_VARIANT, default="AHT10"): cv.enum(
+                AHT10_VARIANTS, upper=True
+            ),
         }
     )
     .extend(cv.polling_component_schema("60s"))
@@ -44,6 +54,7 @@ async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
     await i2c.register_i2c_device(var, config)
+    cg.add(var.set_variant(config[CONF_VARIANT]))
 
     if temperature := config.get(CONF_TEMPERATURE):
         sens = await sensor.new_sensor(temperature)

esphome/components/aic3204/aic3204.cpp

@@ -0,0 +1,173 @@
+#include "aic3204.h"
+
+#include "esphome/core/defines.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace aic3204 {
+
+static const char *const TAG = "aic3204";
+
+#define ERROR_CHECK(err, msg) \
+  if (!(err)) { \
+    ESP_LOGE(TAG, msg); \
+    this->mark_failed(); \
+    return; \
+  }
+
+void AIC3204::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AIC3204...");
+
+  // Set register page to 0
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set page 0 failed");
+  // Initiate SW reset (PLL is powered off as part of reset)
+  ERROR_CHECK(this->write_byte(AIC3204_SW_RST, 0x01), "Software reset failed");
+  // *** Program clock settings ***
+  // Default is CODEC_CLKIN is from MCLK pin. Don't need to change this.
+  // MDAC*NDAC*FOSR*48Khz = mClk (24.576 MHz when the XMOS is expecting 48kHz audio)
+  // (See page 51 of https://www.ti.com/lit/ml/slaa557/slaa557.pdf)
+  // We do need MDAC*DOSR/32 >= the resource compute level for the processing block
+  // So here 2*128/32 = 8, which is equal to processing block 1 's resource compute
+  // See page 5 of https://www.ti.com/lit/an/slaa404c/slaa404c.pdf for the workflow
+  // for determining these settings.
+
+  // Power up NDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_NDAC, 0x82), "Set NDAC failed");
+  // Power up MDAC and set to 2
+  ERROR_CHECK(this->write_byte(AIC3204_MDAC, 0x82), "Set MDAC failed");
+  // Program DOSR = 128
+  ERROR_CHECK(this->write_byte(AIC3204_DOSR, 0x80), "Set DOSR failed");
+  // Set Audio Interface Config: I2S, 32 bits, DOUT always driving
+  ERROR_CHECK(this->write_byte(AIC3204_CODEC_IF, 0x30), "Set CODEC_IF failed");
+  // For I2S Firmware only, set SCLK/MFP3 pin as Audio Data In
+  ERROR_CHECK(this->write_byte(AIC3204_SCLK_MFP3, 0x02), "Set SCLK/MFP3 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_4, 0x01), "Set AUDIO_IF_4 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_5, 0x01), "Set AUDIO_IF_5 failed");
+  // Program the DAC processing block to be used - PRB_P1
+  ERROR_CHECK(this->write_byte(AIC3204_DAC_SIG_PROC, 0x01), "Set DAC_SIG_PROC failed");
+
+  // *** Select Page 1 ***
+  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x01), "Set page 1 failed");
+  // Enable the internal AVDD_LDO:
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x09), "Set LDO_CTRL failed");
+  // *** Program Analog Blocks ***
+  // Disable Internal Crude AVdd in presence of external AVdd supply or before powering up internal AVdd LDO
+  ERROR_CHECK(this->write_byte(AIC3204_PWR_CFG, 0x08), "Set PWR_CFG failed");
+  // Enable Master Analog Power Control
+  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x01), "Set LDO_CTRL failed");
+  // Page 125: Common mode control register, set d6 to 1 to make the full chip common mode = 0.75 v
+  // We are using the internal AVdd regulator with a nominal output of 1.72 V (see LDO_CTRL_REGISTER on page 123)
+  // Page 86 says to only set the common mode voltage to 0.9 v if AVdd >= 1.8... but it isn't on our hardware
+  // We also adjust the HPL and HPR gains to -2dB gian later in this config flow compensate (see page 47)
+  // (All pages refer to the TLV320AIC3204 Application Reference Guide)
+  ERROR_CHECK(this->write_byte(AIC3204_CM_CTRL, 0x40), "Set CM_CTRL failed");
+  // *** Set PowerTune Modes ***
+  // Set the Left & Right DAC PowerTune mode to PTM_P3/4. Use Class-AB driver.
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG1, 0x00), "Set PLAY_CFG1 failed");
+  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG2, 0x00), "Set PLAY_CFG2 failed");
+  // Set the REF charging time to 40ms
+  ERROR_CHECK(this->write_byte(AIC3204_REF_STARTUP, 0x01), "Set REF_STARTUP failed");
+  // HP soft stepping settings for optimal pop performance at power up
+  // Rpop used is 6k with N = 6 and soft step = 20usec. This should work with 47uF coupling
+  // capacitor. Can try N=5,6 or 7 time constants as well. Trade-off delay vs “pop” sound.
+  ERROR_CHECK(this->write_byte(AIC3204_HP_START, 0x25), "Set HP_START failed");
+  // Route Left DAC to HPL
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_ROUTE, 0x08), "Set HPL_ROUTE failed");
+  // Route Right DAC to HPR
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_ROUTE, 0x08), "Set HPR_ROUTE failed");
+  // Route Left DAC to LOL
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_ROUTE, 0x08), "Set LOL_ROUTE failed");
+  // Route Right DAC to LOR
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_ROUTE, 0x08), "Set LOR_ROUTE failed");
+
+  // Unmute HPL and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPL_GAIN, 0x3e), "Set HPL_GAIN failed");
+  // Unmute HPR and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
+  ERROR_CHECK(this->write_byte(AIC3204_HPR_GAIN, 0x3e), "Set HPR_GAIN failed");
+  // Unmute LOL and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOL_DRV_GAIN, 0x00), "Set LOL_DRV_GAIN failed");
+  // Unmute LOR and set gain to 0dB
+  ERROR_CHECK(this->write_byte(AIC3204_LOR_DRV_GAIN, 0x00), "Set LOR_DRV_GAIN failed");
+
+  // Power up HPL and HPR, LOL and LOR drivers
+  ERROR_CHECK(this->write_byte(AIC3204_OP_PWR_CTRL, 0x3C), "Set OP_PWR_CTRL failed");
+
+  // Wait for 2.5 sec for soft stepping to take effect before attempting power-up
+  this->set_timeout(2500, [this]() {
+    // *** Power Up DAC ***
+    // Select Page 0
+    ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set PAGE_CTRL failed");
+    // Power up the Left and Right DAC Channels. Route Left data to Left DAC and Right data to Right DAC.
+    // DAC Vol control soft step 1 step per DAC word clock.
+    ERROR_CHECK(this->write_byte(AIC3204_DAC_CH_SET1, 0xd4), "Set DAC_CH_SET1 failed");
+    // Set left and right DAC digital volume control
+    ERROR_CHECK(this->write_volume_(), "Set volume failed");
+    // Unmute left and right channels
+    ERROR_CHECK(this->write_mute_(), "Set mute failed");
+  });
+}
+
+void AIC3204::dump_config() {
+  ESP_LOGCONFIG(TAG, "AIC3204:");
+  LOG_I2C_DEVICE(this);
+
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with AIC3204 failed");
+  }
+}
+
+bool AIC3204::set_mute_off() {
+  this->is_muted_ = false;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_mute_on() {
+  this->is_muted_ = true;
+  return this->write_mute_();
+}
+
+bool AIC3204::set_auto_mute_mode(uint8_t auto_mute_mode) {
+  this->auto_mute_mode_ = auto_mute_mode & 0x07;
+  ESP_LOGVV(TAG, "Setting auto_mute_mode to 0x%.2x", this->auto_mute_mode_);
+  return this->write_mute_();
+}
+
+bool AIC3204::set_volume(float volume) {
+  this->volume_ = clamp<float>(volume, 0.0, 1.0);
+  return this->write_volume_();
+}
+
+bool AIC3204::is_muted() { return this->is_muted_; }
+
+float AIC3204::volume() { return this->volume_; }
+
+bool AIC3204::write_mute_() {
+  uint8_t mute_mode_byte = this->auto_mute_mode_ << 4;  // auto-mute control is bits 4-6
+  mute_mode_byte |= this->is_muted_ ? 0x0c : 0x00;      // mute bits are 2-3
+  if (!this->write_byte(AIC3204_PAGE_CTRL, 0x00) || !this->write_byte(AIC3204_DAC_CH_SET2, mute_mode_byte)) {
+    ESP_LOGE(TAG, "Writing mute modes failed");
+    return false;
+  }
+  return true;
+}
+
+bool AIC3204::write_volume_() {
+  const int8_t dvc_min_byte = -127;
+  const int8_t dvc_max_byte = 48;
+
+  int8_t volume_byte = dvc_min_byte + (this->volume_ * (dvc_max_byte - dvc_min_byte));
+  volume_byte = clamp<int8_t>(volume_byte, dvc_min_byte, dvc_max_byte);
+
+  ESP_LOGVV(TAG, "Setting volume to 0x%.2x", volume_byte & 0xFF);
+
+  if ((!this->write_byte(AIC3204_PAGE_CTRL, 0x00)) || (!this->write_byte(AIC3204_DACL_VOL_D, volume_byte)) ||
+      (!this->write_byte(AIC3204_DACR_VOL_D, volume_byte))) {
+    ESP_LOGE(TAG, "Writing volume failed");
+    return false;
+  }
+  return true;
+}
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/aic3204.h

@@ -0,0 +1,88 @@
+#pragma once
+
+#include "esphome/components/audio_dac/audio_dac.h"
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
+
+namespace esphome {
+namespace aic3204 {
+
+// TLV320AIC3204 Register Addresses
+// Page 0
+static const uint8_t AIC3204_PAGE_CTRL = 0x00;     // Register 0  - Page Control
+static const uint8_t AIC3204_SW_RST = 0x01;        // Register 1  - Software Reset
+static const uint8_t AIC3204_CLK_PLL1 = 0x04;      // Register 4  - Clock Setting Register 1, Multiplexers
+static const uint8_t AIC3204_CLK_PLL2 = 0x05;      // Register 5  - Clock Setting Register 2, P and R values
+static const uint8_t AIC3204_CLK_PLL3 = 0x06;      // Register 6  - Clock Setting Register 3, J values
+static const uint8_t AIC3204_NDAC = 0x0B;          // Register 11 - NDAC Divider Value
+static const uint8_t AIC3204_MDAC = 0x0C;          // Register 12 - MDAC Divider Value
+static const uint8_t AIC3204_DOSR = 0x0E;          // Register 14 - DOSR Divider Value (LS Byte)
+static const uint8_t AIC3204_NADC = 0x12;          // Register 18 - NADC Divider Value
+static const uint8_t AIC3204_MADC = 0x13;          // Register 19 - MADC Divider Value
+static const uint8_t AIC3204_AOSR = 0x14;          // Register 20 - AOSR Divider Value
+static const uint8_t AIC3204_CODEC_IF = 0x1B;      // Register 27 - CODEC Interface Control
+static const uint8_t AIC3204_AUDIO_IF_4 = 0x1F;    // Register 31 - Audio Interface Setting Register 4
+static const uint8_t AIC3204_AUDIO_IF_5 = 0x20;    // Register 32 - Audio Interface Setting Register 5
+static const uint8_t AIC3204_SCLK_MFP3 = 0x38;     // Register 56 - SCLK/MFP3 Function Control
+static const uint8_t AIC3204_DAC_SIG_PROC = 0x3C;  // Register 60 - DAC Sig Processing Block Control
+static const uint8_t AIC3204_ADC_SIG_PROC = 0x3D;  // Register 61 - ADC Sig Processing Block Control
+static const uint8_t AIC3204_DAC_CH_SET1 = 0x3F;   // Register 63 - DAC Channel Setup 1
+static const uint8_t AIC3204_DAC_CH_SET2 = 0x40;   // Register 64 - DAC Channel Setup 2
+static const uint8_t AIC3204_DACL_VOL_D = 0x41;    // Register 65 - DAC Left Digital Vol Control
+static const uint8_t AIC3204_DACR_VOL_D = 0x42;    // Register 66 - DAC Right Digital Vol Control
+static const uint8_t AIC3204_DRC_ENABLE = 0x44;
+static const uint8_t AIC3204_ADC_CH_SET = 0x51;    // Register 81 - ADC Channel Setup
+static const uint8_t AIC3204_ADC_FGA_MUTE = 0x52;  // Register 82 - ADC Fine Gain Adjust/Mute
+
+// Page 1
+static const uint8_t AIC3204_PWR_CFG = 0x01;       // Register 1  - Power Config
+static const uint8_t AIC3204_LDO_CTRL = 0x02;      // Register 2  - LDO Control
+static const uint8_t AIC3204_PLAY_CFG1 = 0x03;     // Register 3  - Playback Config 1
+static const uint8_t AIC3204_PLAY_CFG2 = 0x04;     // Register 4  - Playback Config 2
+static const uint8_t AIC3204_OP_PWR_CTRL = 0x09;   // Register 9  - Output Driver Power Control
+static const uint8_t AIC3204_CM_CTRL = 0x0A;       // Register 10 - Common Mode Control
+static const uint8_t AIC3204_HPL_ROUTE = 0x0C;     // Register 12 - HPL Routing Select
+static const uint8_t AIC3204_HPR_ROUTE = 0x0D;     // Register 13 - HPR Routing Select
+static const uint8_t AIC3204_LOL_ROUTE = 0x0E;     // Register 14 - LOL Routing Selection
+static const uint8_t AIC3204_LOR_ROUTE = 0x0F;     // Register 15 - LOR Routing Selection
+static const uint8_t AIC3204_HPL_GAIN = 0x10;      // Register 16 - HPL Driver Gain
+static const uint8_t AIC3204_HPR_GAIN = 0x11;      // Register 17 - HPR Driver Gain
+static const uint8_t AIC3204_LOL_DRV_GAIN = 0x12;  // Register 18 - LOL Driver Gain Setting
+static const uint8_t AIC3204_LOR_DRV_GAIN = 0x13;  // Register 19 - LOR Driver Gain Setting
+static const uint8_t AIC3204_HP_START = 0x14;      // Register 20 - Headphone Driver Startup
+static const uint8_t AIC3204_LPGA_P_ROUTE = 0x34;  // Register 52 - Left PGA Positive Input Route
+static const uint8_t AIC3204_LPGA_N_ROUTE = 0x36;  // Register 54 - Left PGA Negative Input Route
+static const uint8_t AIC3204_RPGA_P_ROUTE = 0x37;  // Register 55 - Right PGA Positive Input Route
+static const uint8_t AIC3204_RPGA_N_ROUTE = 0x39;  // Register 57 - Right PGA Negative Input Route
+static const uint8_t AIC3204_LPGA_VOL = 0x3B;      // Register 59 - Left PGA Volume
+static const uint8_t AIC3204_RPGA_VOL = 0x3C;      // Register 60 - Right PGA Volume
+static const uint8_t AIC3204_ADC_PTM = 0x3D;       // Register 61 - ADC Power Tune Config
+static const uint8_t AIC3204_AN_IN_CHRG = 0x47;    // Register 71 - Analog Input Quick Charging Config
+static const uint8_t AIC3204_REF_STARTUP = 0x7B;   // Register 123 - Reference Power Up Config
+
+class AIC3204 : public audio_dac::AudioDac, public Component, public i2c::I2CDevice {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+  bool set_mute_off() override;
+  bool set_mute_on() override;
+  bool set_auto_mute_mode(uint8_t auto_mute_mode);
+  bool set_volume(float volume) override;
+
+  bool is_muted() override;
+  float volume() override;
+
+ protected:
+  bool write_mute_();
+  bool write_volume_();
+
+  uint8_t auto_mute_mode_{0};
+  float volume_{0};
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/aic3204/audio_dac.py

@@ -0,0 +1,52 @@
+from esphome import automation
+import esphome.codegen as cg
+from esphome.components import i2c
+from esphome.components.audio_dac import AudioDac
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_MODE
+
+CODEOWNERS = ["@kbx81"]
+DEPENDENCIES = ["i2c"]
+
+aic3204_ns = cg.esphome_ns.namespace("aic3204")
+AIC3204 = aic3204_ns.class_("AIC3204", AudioDac, cg.Component, i2c.I2CDevice)
+
+SetAutoMuteAction = aic3204_ns.class_("SetAutoMuteAction", automation.Action)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AIC3204),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x18))
+)
+
+
+SET_AUTO_MUTE_ACTION_SCHEMA = cv.maybe_simple_value(
+    {
+        cv.GenerateID(): cv.use_id(AIC3204),
+        cv.Required(CONF_MODE): cv.templatable(cv.int_range(max=7, min=0)),
+    },
+    key=CONF_MODE,
+)
+
+
+@automation.register_action(
+    "aic3204.set_auto_mute_mode", SetAutoMuteAction, SET_AUTO_MUTE_ACTION_SCHEMA
+)
+async def aic3204_set_volume_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+
+    template_ = await cg.templatable(config.get(CONF_MODE), args, int)
+    cg.add(var.set_auto_mute_mode(template_))
+
+    return var
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)

esphome/components/aic3204/automation.h

@@ -0,0 +1,23 @@
+#pragma once
+
+#include "esphome/core/automation.h"
+#include "esphome/core/component.h"
+#include "aic3204.h"
+
+namespace esphome {
+namespace aic3204 {
+
+template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
+ public:
+  explicit SetAutoMuteAction(AIC3204 *aic3204) : aic3204_(aic3204) {}
+
+  TEMPLATABLE_VALUE(uint8_t, auto_mute_mode)
+
+  void play(Ts... x) override { this->aic3204_->set_auto_mute_mode(this->auto_mute_mode_.value(x...)); }
+
+ protected:
+  AIC3204 *aic3204_;
+};
+
+}  // namespace aic3204
+}  // namespace esphome

esphome/components/airthings_wave_plus/airthings_wave_plus.cpp

@@ -14,8 +14,6 @@ void AirthingsWavePlus::read_sensors(uint8_t *raw_value, uint16_t value_len) {
     ESP_LOGD(TAG, "version = %d", value->version);
 
     if (value->version == 1) {
-      ESP_LOGD(TAG, "ambient light = %d", value->ambientLight);
-
       if (this->humidity_sensor_ != nullptr) {
         this->humidity_sensor_->publish_state(value->humidity / 2.0f);
       }
@@ -43,6 +41,10 @@ void AirthingsWavePlus::read_sensors(uint8_t *raw_value, uint16_t value_len) {
       if ((this->tvoc_sensor_ != nullptr) && this->is_valid_voc_value_(value->voc)) {
         this->tvoc_sensor_->publish_state(value->voc);
       }
+
+      if (this->illuminance_sensor_ != nullptr) {
+        this->illuminance_sensor_->publish_state(value->ambientLight);
+      }
     } else {
       ESP_LOGE(TAG, "Invalid payload version (%d != 1, newer version or not a Wave Plus?)", value->version);
     }
@@ -68,6 +70,7 @@ void AirthingsWavePlus::dump_config() {
   LOG_SENSOR("  ", "Radon", this->radon_sensor_);
   LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
   LOG_SENSOR("  ", "CO2", this->co2_sensor_);
+  LOG_SENSOR("  ", "Illuminance", this->illuminance_sensor_);
 }
 
 AirthingsWavePlus::AirthingsWavePlus() {

esphome/components/airthings_wave_plus/airthings_wave_plus.h

@@ -22,6 +22,7 @@ class AirthingsWavePlus : public airthings_wave_base::AirthingsWaveBase {
   void set_radon(sensor::Sensor *radon) { radon_sensor_ = radon; }
   void set_radon_long_term(sensor::Sensor *radon_long_term) { radon_long_term_sensor_ = radon_long_term; }
   void set_co2(sensor::Sensor *co2) { co2_sensor_ = co2; }
+  void set_illuminance(sensor::Sensor *illuminance) { illuminance_sensor_ = illuminance; }
 
  protected:
   bool is_valid_radon_value_(uint16_t radon);
@@ -32,6 +33,7 @@ class AirthingsWavePlus : public airthings_wave_base::AirthingsWaveBase {
   sensor::Sensor *radon_sensor_{nullptr};
   sensor::Sensor *radon_long_term_sensor_{nullptr};
   sensor::Sensor *co2_sensor_{nullptr};
+  sensor::Sensor *illuminance_sensor_{nullptr};
 
   struct WavePlusReadings {
     uint8_t version;

esphome/components/airthings_wave_plus/sensor.py

@@ -12,6 +12,9 @@ from esphome.const import (
     CONF_CO2,
     UNIT_BECQUEREL_PER_CUBIC_METER,
     UNIT_PARTS_PER_MILLION,
+    CONF_ILLUMINANCE,
+    UNIT_LUX,
+    DEVICE_CLASS_ILLUMINANCE,
 )
 
 DEPENDENCIES = airthings_wave_base.DEPENDENCIES
@@ -45,6 +48,12 @@ CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
             device_class=DEVICE_CLASS_CARBON_DIOXIDE,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
+        cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(
+            unit_of_measurement=UNIT_LUX,
+            accuracy_decimals=0,
+            device_class=DEVICE_CLASS_ILLUMINANCE,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
     }
 )
 
@@ -62,3 +71,6 @@ async def to_code(config):
     if config_co2 := config.get(CONF_CO2):
         sens = await sensor.new_sensor(config_co2)
         cg.add(var.set_co2(sens))
+    if config_illuminance := config.get(CONF_ILLUMINANCE):
+        sens = await sensor.new_sensor(config_illuminance)
+        cg.add(var.set_illuminance(sens))

esphome/components/alarm_control_panel/__init__.py

@@ -1,17 +1,20 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.core import CORE, coroutine_with_priority
+import esphome.codegen as cg
+from esphome.components import mqtt, web_server
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_CODE,
     CONF_ID,
+    CONF_MQTT_ID,
     CONF_ON_STATE,
     CONF_TRIGGER_ID,
-    CONF_CODE,
+    CONF_WEB_SERVER,
 )
+from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
 
-CODEOWNERS = ["@grahambrown11"]
+CODEOWNERS = ["@grahambrown11", "@hwstar"]
 IS_PLATFORM_COMPONENT = True
 
 CONF_ON_TRIGGERED = "on_triggered"
@@ -22,6 +25,8 @@ CONF_ON_ARMED_HOME = "on_armed_home"
 CONF_ON_ARMED_NIGHT = "on_armed_night"
 CONF_ON_ARMED_AWAY = "on_armed_away"
 CONF_ON_DISARMED = "on_disarmed"
+CONF_ON_CHIME = "on_chime"
+CONF_ON_READY = "on_ready"
 
 alarm_control_panel_ns = cg.esphome_ns.namespace("alarm_control_panel")
 AlarmControlPanel = alarm_control_panel_ns.class_("AlarmControlPanel", cg.EntityBase)
@@ -53,65 +58,92 @@ ArmedAwayTrigger = alarm_control_panel_ns.class_(
 DisarmedTrigger = alarm_control_panel_ns.class_(
     "DisarmedTrigger", automation.Trigger.template()
 )
+ChimeTrigger = alarm_control_panel_ns.class_(
+    "ChimeTrigger", automation.Trigger.template()
+)
+ReadyTrigger = alarm_control_panel_ns.class_(
+    "ReadyTrigger", automation.Trigger.template()
+)
+
 ArmAwayAction = alarm_control_panel_ns.class_("ArmAwayAction", automation.Action)
 ArmHomeAction = alarm_control_panel_ns.class_("ArmHomeAction", automation.Action)
 ArmNightAction = alarm_control_panel_ns.class_("ArmNightAction", automation.Action)
 DisarmAction = alarm_control_panel_ns.class_("DisarmAction", automation.Action)
 PendingAction = alarm_control_panel_ns.class_("PendingAction", automation.Action)
 TriggeredAction = alarm_control_panel_ns.class_("TriggeredAction", automation.Action)
+ChimeAction = alarm_control_panel_ns.class_("ChimeAction", automation.Action)
+ReadyAction = alarm_control_panel_ns.class_("ReadyAction", automation.Action)
+
 AlarmControlPanelCondition = alarm_control_panel_ns.class_(
     "AlarmControlPanelCondition", automation.Condition
 )
 
-ALARM_CONTROL_PANEL_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
-    {
-        cv.GenerateID(): cv.declare_id(AlarmControlPanel),
-        cv.Optional(CONF_ON_STATE): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(StateTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_TRIGGERED): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(TriggeredTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_ARMING): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmingTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_PENDING): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PendingTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_ARMED_HOME): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedHomeTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_ARMED_NIGHT): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedNightTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_ARMED_AWAY): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedAwayTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_DISARMED): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DisarmedTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_CLEARED): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClearedTrigger),
-            }
-        ),
-    }
+ALARM_CONTROL_PANEL_SCHEMA = (
+    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
+    .extend(cv.MQTT_COMMAND_COMPONENT_SCHEMA)
+    .extend(
+        {
+            cv.GenerateID(): cv.declare_id(AlarmControlPanel),
+            cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(
+                mqtt.MQTTAlarmControlPanelComponent
+            ),
+            cv.Optional(CONF_ON_STATE): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(StateTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_TRIGGERED): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(TriggeredTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_ARMING): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmingTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_PENDING): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(PendingTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_ARMED_HOME): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedHomeTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_ARMED_NIGHT): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedNightTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_ARMED_AWAY): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ArmedAwayTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_DISARMED): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DisarmedTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_CLEARED): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClearedTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_CHIME): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ChimeTrigger),
+                }
+            ),
+            cv.Optional(CONF_ON_READY): automation.validate_automation(
+                {
+                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ReadyTrigger),
+                }
+            ),
+        }
+    )
 )
 
 ALARM_CONTROL_PANEL_ACTION_SCHEMA = maybe_simple_id(
@@ -157,6 +189,17 @@ async def setup_alarm_control_panel_core_(var, config):
     for conf in config.get(CONF_ON_CLEARED, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_CHIME, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_READY, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    if web_server_config := config.get(CONF_WEB_SERVER):
+        await web_server.add_entity_config(var, web_server_config)
+    if mqtt_id := config.get(CONF_MQTT_ID):
+        mqtt_ = cg.new_Pvariable(mqtt_id, var)
+        await mqtt.register_mqtt_component(mqtt_, config)
 
 
 async def register_alarm_control_panel(var, config):
@@ -232,6 +275,29 @@ async def alarm_action_trigger_to_code(config, action_id, template_arg, args):
     return var
 
 
+@automation.register_action(
+    "alarm_control_panel.chime", ChimeAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_chime_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.ready", ReadyAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+@automation.register_condition(
+    "alarm_control_panel.ready",
+    AlarmControlPanelCondition,
+    ALARM_CONTROL_PANEL_CONDITION_SCHEMA,
+)
+async def alarm_action_ready_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
 @automation.register_condition(
     "alarm_control_panel.is_armed",
     AlarmControlPanelCondition,

esphome/components/alarm_control_panel/alarm_control_panel.cpp

@@ -96,6 +96,14 @@ void AlarmControlPanel::add_on_cleared_callback(std::function<void()> &&callback
   this->cleared_callback_.add(std::move(callback));
 }
 
+void AlarmControlPanel::add_on_chime_callback(std::function<void()> &&callback) {
+  this->chime_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::add_on_ready_callback(std::function<void()> &&callback) {
+  this->ready_callback_.add(std::move(callback));
+}
+
 void AlarmControlPanel::arm_away(optional<std::string> code) {
   auto call = this->make_call();
   call.arm_away();

esphome/components/alarm_control_panel/alarm_control_panel.h

@@ -89,6 +89,18 @@ class AlarmControlPanel : public EntityBase {
    */
   void add_on_cleared_callback(std::function<void()> &&callback);
 
+  /** Add a callback for when a chime zone goes from closed to open
+   *
+   * @param callback The callback function
+   */
+  void add_on_chime_callback(std::function<void()> &&callback);
+
+  /** Add a callback for when a ready state changes
+   *
+   * @param callback The callback function
+   */
+  void add_on_ready_callback(std::function<void()> &&callback);
+
   /** A numeric representation of the supported features as per HomeAssistant
    *
    */
@@ -178,6 +190,10 @@ class AlarmControlPanel : public EntityBase {
   CallbackManager<void()> disarmed_callback_{};
   // clear callback
   CallbackManager<void()> cleared_callback_{};
+  // chime callback
+  CallbackManager<void()> chime_callback_{};
+  // ready callback
+  CallbackManager<void()> ready_callback_{};
 };
 
 }  // namespace alarm_control_panel

esphome/components/alarm_control_panel/automation.h

@@ -69,6 +69,20 @@ class ClearedTrigger : public Trigger<> {
   }
 };
 
+class ChimeTrigger : public Trigger<> {
+ public:
+  explicit ChimeTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_chime_callback([this]() { this->trigger(); });
+  }
+};
+
+class ReadyTrigger : public Trigger<> {
+ public:
+  explicit ReadyTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_ready_callback([this]() { this->trigger(); });
+  }
+};
+
 template<typename... Ts> class ArmAwayAction : public Action<Ts...> {
  public:
   explicit ArmAwayAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}

esphome/components/alpha3/alpha3.cpp

@@ -97,9 +97,11 @@ void Alpha3::handle_geni_response_(const uint8_t *response, uint16_t length) {
 void Alpha3::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
   switch (event) {
     case ESP_GATTC_OPEN_EVT: {
-      this->response_offset_ = 0;
-      this->response_length_ = 0;
-      ESP_LOGI(TAG, "[%s] connection open", this->parent_->address_str().c_str());
+      if (param->open.status == ESP_GATT_OK) {
+        this->response_offset_ = 0;
+        this->response_length_ = 0;
+        ESP_LOGI(TAG, "[%s] connection open", this->parent_->address_str().c_str());
+      }
       break;
     }
     case ESP_GATTC_CONNECT_EVT: {

esphome/components/am2315c/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@swoboda1337"]

esphome/components/am2315c/am2315c.cpp

@@ -0,0 +1,200 @@
+// MIT License
+//
+// Copyright (c) 2023-2024 Rob Tillaart
+//
+// Permission is hereby granted, free of charge, to any person obtaining a copy
+// of this software and associated documentation files (the "Software"), to deal
+// in the Software without restriction, including without limitation the rights
+// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+// copies of the Software, and to permit persons to whom the Software is
+// furnished to do so, subject to the following conditions:
+//
+// The above copyright notice and this permission notice shall be included in all
+// copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+// SOFTWARE.
+#include "am2315c.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace am2315c {
+
+static const char *const TAG = "am2315c";
+
+uint8_t AM2315C::crc8_(uint8_t *data, uint8_t len) {
+  uint8_t crc = 0xFF;
+  while (len--) {
+    crc ^= *data++;
+    for (uint8_t i = 0; i < 8; i++) {
+      if (crc & 0x80) {
+        crc <<= 1;
+        crc ^= 0x31;
+      } else {
+        crc <<= 1;
+      }
+    }
+  }
+  return crc;
+}
+
+bool AM2315C::reset_register_(uint8_t reg) {
+  //  code based on demo code sent by www.aosong.com
+  //  no further documentation.
+  //  0x1B returned 18, 0, 4
+  //  0x1C returned 18, 65, 0
+  //  0x1E returned 18, 8, 0
+  //    18 seems to be status register
+  //    other values unknown.
+  uint8_t data[3];
+  data[0] = reg;
+  data[1] = 0;
+  data[2] = 0;
+  ESP_LOGD(TAG, "Reset register: 0x%02x", reg);
+  if (this->write(data, 3) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Write failed!");
+    this->mark_failed();
+    return false;
+  }
+  delay(5);
+  if (this->read(data, 3) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Read failed!");
+    this->mark_failed();
+    return false;
+  }
+  delay(10);
+  data[0] = 0xB0 | reg;
+  if (this->write(data, 3) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Write failed!");
+    this->mark_failed();
+    return false;
+  }
+  delay(5);
+  return true;
+}
+
+bool AM2315C::convert_(uint8_t *data, float &humidity, float &temperature) {
+  uint32_t raw;
+  raw = (data[1] << 12) | (data[2] << 4) | (data[3] >> 4);
+  humidity = raw * 9.5367431640625e-5;
+  raw = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5];
+  temperature = raw * 1.9073486328125e-4 - 50;
+  return this->crc8_(data, 6) == data[6];
+}
+
+void AM2315C::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up AM2315C...");
+
+  // get status
+  uint8_t status = 0;
+  if (this->read(&status, 1) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Read failed!");
+    this->mark_failed();
+    return;
+  }
+
+  // reset registers if required, according to the datasheet
+  // this can be required after power on, although this was
+  // never required during testing
+  if ((status & 0x18) != 0x18) {
+    ESP_LOGD(TAG, "Resetting AM2315C registers");
+    if (!this->reset_register_(0x1B)) {
+      this->mark_failed();
+      return;
+    }
+    if (!this->reset_register_(0x1C)) {
+      this->mark_failed();
+      return;
+    }
+    if (!this->reset_register_(0x1E)) {
+      this->mark_failed();
+      return;
+    }
+  }
+}
+
+void AM2315C::update() {
+  // request measurement
+  uint8_t data[3];
+  data[0] = 0xAC;
+  data[1] = 0x33;
+  data[2] = 0x00;
+  if (this->write(data, 3) != i2c::ERROR_OK) {
+    ESP_LOGE(TAG, "Write failed!");
+    this->mark_failed();
+    return;
+  }
+
+  // wait for hw to complete measurement
+  set_timeout(160, [this]() {
+    // check status
+    uint8_t status = 0;
+    if (this->read(&status, 1) != i2c::ERROR_OK) {
+      ESP_LOGE(TAG, "Read failed!");
+      this->mark_failed();
+      return;
+    }
+    if ((status & 0x80) == 0x80) {
+      ESP_LOGE(TAG, "HW still busy!");
+      this->mark_failed();
+      return;
+    }
+
+    // read
+    uint8_t data[7];
+    if (this->read(data, 7) != i2c::ERROR_OK) {
+      ESP_LOGE(TAG, "Read failed!");
+      this->mark_failed();
+      return;
+    }
+
+    // check for all zeros
+    bool zeros = true;
+    for (uint8_t i : data) {
+      zeros = zeros && (i == 0);
+    }
+    if (zeros) {
+      ESP_LOGW(TAG, "Data all zeros!");
+      this->status_set_warning();
+      return;
+    }
+
+    // convert
+    float temperature = 0.0;
+    float humidity = 0.0;
+    if (this->convert_(data, humidity, temperature)) {
+      if (this->temperature_sensor_ != nullptr) {
+        this->temperature_sensor_->publish_state(temperature);
+      }
+      if (this->humidity_sensor_ != nullptr) {
+        this->humidity_sensor_->publish_state(humidity);
+      }
+      this->status_clear_warning();
+    } else {
+      ESP_LOGW(TAG, "CRC failed!");
+      this->status_set_warning();
+    }
+  });
+}
+
+void AM2315C::dump_config() {
+  ESP_LOGCONFIG(TAG, "AM2315C:");
+  LOG_I2C_DEVICE(this);
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Communication with AM2315C failed!");
+  }
+  LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
+  LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
+}
+
+float AM2315C::get_setup_priority() const { return setup_priority::DATA; }
+
+}  // namespace am2315c
+}  // namespace esphome

esphome/components/am2315c/am2315c.h

@@ -0,0 +1,51 @@
+// MIT License
+//
+// Copyright (c) 2023-2024 Rob Tillaart
+//
+// Permission is hereby granted, free of charge, to any person obtaining a copy
+// of this software and associated documentation files (the "Software"), to deal
+// in the Software without restriction, including without limitation the rights
+// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+// copies of the Software, and to permit persons to whom the Software is
+// furnished to do so, subject to the following conditions:
+//
+// The above copyright notice and this permission notice shall be included in all
+// copies or substantial portions of the Software.
+//
+// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+// SOFTWARE.
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/i2c/i2c.h"
+
+namespace esphome {
+namespace am2315c {
+
+class AM2315C : public PollingComponent, public i2c::I2CDevice {
+ public:
+  void dump_config() override;
+  void update() override;
+  void setup() override;
+  float get_setup_priority() const override;
+
+  void set_temperature_sensor(sensor::Sensor *temperature_sensor) { this->temperature_sensor_ = temperature_sensor; }
+  void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
+
+ protected:
+  uint8_t crc8_(uint8_t *data, uint8_t len);
+  bool convert_(uint8_t *data, float &humidity, float &temperature);
+  bool reset_register_(uint8_t reg);
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+};
+
+}  // namespace am2315c
+}  // namespace esphome

esphome/components/am2315c/sensor.py

@@ -0,0 +1,54 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import i2c, sensor
+from esphome.const import (
+    CONF_HUMIDITY,
+    CONF_ID,
+    CONF_TEMPERATURE,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_PERCENT,
+)
+
+DEPENDENCIES = ["i2c"]
+
+am2315c_ns = cg.esphome_ns.namespace("am2315c")
+AM2315C = am2315c_ns.class_("AM2315C", cg.PollingComponent, i2c.I2CDevice)
+
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AM2315C),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+    .extend(i2c.i2c_device_schema(0x38))
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await i2c.register_i2c_device(var, config)
+
+    if temperature_config := config.get(CONF_TEMPERATURE):
+        sens = await sensor.new_sensor(temperature_config)
+        cg.add(var.set_temperature_sensor(sens))
+
+    if humidity_config := config.get(CONF_HUMIDITY):
+        sens = await sensor.new_sensor(humidity_config)
+        cg.add(var.set_humidity_sensor(sens))

esphome/components/am43/sensor/am43_sensor.cpp

@@ -26,7 +26,9 @@ void Am43::setup() {
 void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if, esp_ble_gattc_cb_param_t *param) {
   switch (event) {
     case ESP_GATTC_OPEN_EVT: {
-      this->logged_in_ = false;
+      if (param->open.status == ESP_GATT_OK) {
+        this->logged_in_ = false;
+      }
       break;
     }
     case ESP_GATTC_DISCONNECT_EVT: {