[qspi_dbi] Rename from qspi_amoled, add features (#7594)

Co-authored-by: clydeps <U5yx99dok9>
2025-11-04 00:51:49 +00:00 · 2024-10-16 14:26:50 +11:00
parent 6a86d92781
commit 254522dd93
12 changed files with 385 additions and 207 deletions
--- a/2
+++ b/2
@@ -324,7 +324,7 @@ esphome/components/pvvx_mithermometer/* @pasiz
 esphome/components/pylontech/* @functionpointer
 esphome/components/qmp6988/* @andrewpc
 esphome/components/qr_code/* @wjtje
-esphome/components/qspi_amoled/* @clydebarrow
+esphome/components/qspi_dbi/* @clydebarrow
 esphome/components/qwiic_pir/* @kahrendt
 esphome/components/radon_eye_ble/* @jeffeb3
 esphome/components/radon_eye_rd200/* @jeffeb3
--- a/esphome/components/ili9xxx/display.py
+++ b/esphome/components/ili9xxx/display.py
@@ -10,6 +10,7 @@ from esphome.const import (
    CONF_DIMENSIONS,
    CONF_HEIGHT,
    CONF_ID,
+    CONF_INIT_SEQUENCE,
    CONF_INVERT_COLORS,
    CONF_LAMBDA,
    CONF_MIRROR_X,
@@ -89,7 +90,6 @@ CONF_LED_PIN = "led_pin"
 CONF_COLOR_PALETTE_IMAGES = "color_palette_images"
 CONF_INVERT_DISPLAY = "invert_display"
 CONF_PIXEL_MODE = "pixel_mode"
-CONF_INIT_SEQUENCE = "init_sequence"


 def cmd(c, *args):
--- a/esphome/components/qspi_amoled/display.py
+++ b/esphome/components/qspi_amoled/display.py
@@ -1,143 +1,3 @@
-import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
-from esphome.components import (
-    spi,
-    display,
-)
-from esphome.const import (
-    CONF_RESET_PIN,
-    CONF_ID,
-    CONF_DIMENSIONS,
-    CONF_WIDTH,
-    CONF_HEIGHT,
-    CONF_LAMBDA,
-    CONF_BRIGHTNESS,
-    CONF_ENABLE_PIN,
-    CONF_MODEL,
-    CONF_OFFSET_HEIGHT,
-    CONF_OFFSET_WIDTH,
-    CONF_INVERT_COLORS,
-    CONF_MIRROR_X,
-    CONF_MIRROR_Y,
-    CONF_SWAP_XY,
-    CONF_COLOR_ORDER,
-    CONF_TRANSFORM,
-)

-DEPENDENCIES = ["spi"]
-
-qspi_amoled_ns = cg.esphome_ns.namespace("qspi_amoled")
-QSPI_AMOLED = qspi_amoled_ns.class_(
-    "QspiAmoLed", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice
-)
-ColorOrder = display.display_ns.enum("ColorMode")
-Model = qspi_amoled_ns.enum("Model")
-
-MODELS = {"RM690B0": Model.RM690B0, "RM67162": Model.RM67162}
-
-COLOR_ORDERS = {
-    "RGB": ColorOrder.COLOR_ORDER_RGB,
-    "BGR": ColorOrder.COLOR_ORDER_BGR,
-}
-DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema
-
-
-def validate_dimension(value):
-    value = cv.positive_int(value)
-    if value % 2 != 0:
-        raise cv.Invalid("Width/height/offset must be divisible by 2")
-    return value
-
-
-CONFIG_SCHEMA = cv.All(
-    display.FULL_DISPLAY_SCHEMA.extend(
-        cv.Schema(
-            {
-                cv.GenerateID(): cv.declare_id(QSPI_AMOLED),
-                cv.Required(CONF_MODEL): cv.enum(MODELS, upper=True),
-                cv.Required(CONF_DIMENSIONS): cv.Any(
-                    cv.dimensions,
-                    cv.Schema(
-                        {
-                            cv.Required(CONF_WIDTH): validate_dimension,
-                            cv.Required(CONF_HEIGHT): validate_dimension,
-                            cv.Optional(
-                                CONF_OFFSET_HEIGHT, default=0
-                            ): validate_dimension,
-                            cv.Optional(
-                                CONF_OFFSET_WIDTH, default=0
-                            ): validate_dimension,
-                        }
-                    ),
-                ),
-                cv.Optional(CONF_TRANSFORM): cv.Schema(
-                    {
-                        cv.Optional(CONF_MIRROR_X, default=False): cv.boolean,
-                        cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean,
-                        cv.Optional(CONF_SWAP_XY, default=False): cv.boolean,
-                    }
-                ),
-                cv.Optional(CONF_COLOR_ORDER, default="RGB"): cv.enum(
-                    COLOR_ORDERS, upper=True
-                ),
-                cv.Optional(CONF_INVERT_COLORS, default=False): cv.boolean,
-                cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
-                cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema,
-                cv.Optional(CONF_BRIGHTNESS, default=0xD0): cv.int_range(
-                    0, 0xFF, min_included=True, max_included=True
-                ),
-            }
-        ).extend(
-            spi.spi_device_schema(
-                cs_pin_required=False,
-                default_mode="MODE0",
-                default_data_rate=10e6,
-                quad=True,
-            )
-        )
-    ),
-    cv.only_with_esp_idf,
-)
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await display.register_display(var, config)
-    await spi.register_spi_device(var, config)
-
-    cg.add(var.set_color_mode(config[CONF_COLOR_ORDER]))
-    cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS]))
-    cg.add(var.set_brightness(config[CONF_BRIGHTNESS]))
-    cg.add(var.set_model(config[CONF_MODEL]))
-    if enable_pin := config.get(CONF_ENABLE_PIN):
-        enable = await cg.gpio_pin_expression(enable_pin)
-        cg.add(var.set_enable_pin(enable))
-
-    if reset_pin := config.get(CONF_RESET_PIN):
-        reset = await cg.gpio_pin_expression(reset_pin)
-        cg.add(var.set_reset_pin(reset))
-
-    if transform := config.get(CONF_TRANSFORM):
-        cg.add(var.set_mirror_x(transform[CONF_MIRROR_X]))
-        cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y]))
-        cg.add(var.set_swap_xy(transform[CONF_SWAP_XY]))
-
-    if CONF_DIMENSIONS in config:
-        dimensions = config[CONF_DIMENSIONS]
-        if isinstance(dimensions, dict):
-            cg.add(var.set_dimensions(dimensions[CONF_WIDTH], dimensions[CONF_HEIGHT]))
-            cg.add(
-                var.set_offsets(
-                    dimensions[CONF_OFFSET_WIDTH], dimensions[CONF_OFFSET_HEIGHT]
-                )
-            )
-        else:
-            (width, height) = dimensions
-            cg.add(var.set_dimensions(width, height))
-
-    if lamb := config.get(CONF_LAMBDA):
-        lambda_ = await cg.process_lambda(
-            lamb, [(display.DisplayRef, "it")], return_type=cg.void
-        )
-        cg.add(var.set_writer(lambda_))
+CONFIG_SCHEMA = cv.invalid("The qspi_amoled component has been renamed to qspi_dbi")
--- a/esphome/components/qspi_amoled/init.py
+++ b/esphome/components/qspi_amoled/init.py
--- a/esphome/components/qspi_dbi/display.py
+++ b/esphome/components/qspi_dbi/display.py
@@ -0,0 +1,185 @@
+from esphome import pins
+import esphome.codegen as cg
+from esphome.components import display, spi
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_BRIGHTNESS,
+    CONF_COLOR_ORDER,
+    CONF_DIMENSIONS,
+    CONF_ENABLE_PIN,
+    CONF_HEIGHT,
+    CONF_ID,
+    CONF_INIT_SEQUENCE,
+    CONF_INVERT_COLORS,
+    CONF_LAMBDA,
+    CONF_MIRROR_X,
+    CONF_MIRROR_Y,
+    CONF_MODEL,
+    CONF_OFFSET_HEIGHT,
+    CONF_OFFSET_WIDTH,
+    CONF_RESET_PIN,
+    CONF_SWAP_XY,
+    CONF_TRANSFORM,
+    CONF_WIDTH,
+)
+from esphome.core import TimePeriod
+
+from .models import DriverChip
+
+DEPENDENCIES = ["spi"]
+
+qspi_dbi_ns = cg.esphome_ns.namespace("qspi_dbi")
+QSPI_DBI = qspi_dbi_ns.class_(
+    "QspiDbi", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice
+)
+ColorOrder = display.display_ns.enum("ColorMode")
+Model = qspi_dbi_ns.enum("Model")
+
+COLOR_ORDERS = {
+    "RGB": ColorOrder.COLOR_ORDER_RGB,
+    "BGR": ColorOrder.COLOR_ORDER_BGR,
+}
+DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema
+
+CONF_DRAW_FROM_ORIGIN = "draw_from_origin"
+DELAY_FLAG = 0xFF
+
+
+def validate_dimension(value):
+    value = cv.positive_int(value)
+    if value % 2 != 0:
+        raise cv.Invalid("Width/height/offset must be divisible by 2")
+    return value
+
+
+def map_sequence(value):
+    """
+    The format is a repeated sequence of [CMD, <data>] where <data> is s a sequence of bytes. The length is inferred
+    from the length of the sequence and should not be explicit.
+    A delay can be inserted by specifying "- delay N" where N is in ms
+    """
+    if isinstance(value, str) and value.lower().startswith("delay "):
+        value = value.lower()[6:]
+        delay = cv.All(
+            cv.positive_time_period_milliseconds,
+            cv.Range(TimePeriod(milliseconds=1), TimePeriod(milliseconds=255)),
+        )(value)
+        return [delay, DELAY_FLAG]
+    value = cv.Length(min=1, max=254)(value)
+    params = value[1:]
+    return [value[0], len(params)] + list(params)
+
+
+def _validate(config):
+    chip = DriverChip.chips[config[CONF_MODEL]]
+    if not chip.initsequence:
+        if CONF_INIT_SEQUENCE not in config:
+            raise cv.Invalid(f"{chip.name} model requires init_sequence")
+    return config
+
+
+CONFIG_SCHEMA = cv.All(
+    display.FULL_DISPLAY_SCHEMA.extend(
+        cv.Schema(
+            {
+                cv.GenerateID(): cv.declare_id(QSPI_DBI),
+                cv.Required(CONF_MODEL): cv.one_of(
+                    *DriverChip.chips.keys(), upper=True
+                ),
+                cv.Optional(CONF_INIT_SEQUENCE): cv.ensure_list(map_sequence),
+                cv.Required(CONF_DIMENSIONS): cv.Any(
+                    cv.dimensions,
+                    cv.Schema(
+                        {
+                            cv.Required(CONF_WIDTH): validate_dimension,
+                            cv.Required(CONF_HEIGHT): validate_dimension,
+                            cv.Optional(
+                                CONF_OFFSET_HEIGHT, default=0
+                            ): validate_dimension,
+                            cv.Optional(
+                                CONF_OFFSET_WIDTH, default=0
+                            ): validate_dimension,
+                        }
+                    ),
+                ),
+                cv.Optional(CONF_TRANSFORM): cv.Schema(
+                    {
+                        cv.Optional(CONF_MIRROR_X, default=False): cv.boolean,
+                        cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean,
+                        cv.Optional(CONF_SWAP_XY, default=False): cv.boolean,
+                    }
+                ),
+                cv.Optional(CONF_COLOR_ORDER, default="RGB"): cv.enum(
+                    COLOR_ORDERS, upper=True
+                ),
+                cv.Optional(CONF_INVERT_COLORS, default=False): cv.boolean,
+                cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
+                cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema,
+                cv.Optional(CONF_BRIGHTNESS, default=0xD0): cv.int_range(
+                    0, 0xFF, min_included=True, max_included=True
+                ),
+                cv.Optional(CONF_DRAW_FROM_ORIGIN, default=False): cv.boolean,
+            }
+        ).extend(
+            spi.spi_device_schema(
+                cs_pin_required=False,
+                default_mode="MODE0",
+                default_data_rate=10e6,
+                quad=True,
+            )
+        )
+    ),
+    cv.only_with_esp_idf,
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await display.register_display(var, config)
+    await spi.register_spi_device(var, config)
+
+    chip = DriverChip.chips[config[CONF_MODEL]]
+    if chip.initsequence:
+        cg.add(var.add_init_sequence(chip.initsequence))
+    if init_sequences := config.get(CONF_INIT_SEQUENCE):
+        sequence = []
+        for seq in init_sequences:
+            sequence.extend(seq)
+        cg.add(var.add_init_sequence(sequence))
+
+    cg.add(var.set_color_mode(config[CONF_COLOR_ORDER]))
+    cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS]))
+    cg.add(var.set_brightness(config[CONF_BRIGHTNESS]))
+    cg.add(var.set_model(config[CONF_MODEL]))
+    cg.add(var.set_draw_from_origin(config[CONF_DRAW_FROM_ORIGIN]))
+    if enable_pin := config.get(CONF_ENABLE_PIN):
+        enable = await cg.gpio_pin_expression(enable_pin)
+        cg.add(var.set_enable_pin(enable))
+
+    if reset_pin := config.get(CONF_RESET_PIN):
+        reset = await cg.gpio_pin_expression(reset_pin)
+        cg.add(var.set_reset_pin(reset))
+
+    if transform := config.get(CONF_TRANSFORM):
+        cg.add(var.set_mirror_x(transform[CONF_MIRROR_X]))
+        cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y]))
+        cg.add(var.set_swap_xy(transform[CONF_SWAP_XY]))
+
+    if CONF_DIMENSIONS in config:
+        dimensions = config[CONF_DIMENSIONS]
+        if isinstance(dimensions, dict):
+            cg.add(var.set_dimensions(dimensions[CONF_WIDTH], dimensions[CONF_HEIGHT]))
+            cg.add(
+                var.set_offsets(
+                    dimensions[CONF_OFFSET_WIDTH], dimensions[CONF_OFFSET_HEIGHT]
+                )
+            )
+        else:
+            (width, height) = dimensions
+            cg.add(var.set_dimensions(width, height))
+
+    if lamb := config.get(CONF_LAMBDA):
+        lambda_ = await cg.process_lambda(
+            lamb, [(display.DisplayRef, "it")], return_type=cg.void
+        )
+        cg.add(var.set_writer(lambda_))
--- a/esphome/components/qspi_dbi/models.py
+++ b/esphome/components/qspi_dbi/models.py
@@ -0,0 +1,64 @@
+# Commands
+SW_RESET_CMD = 0x01
+SLEEP_OUT = 0x11
+INVERT_OFF = 0x20
+INVERT_ON = 0x21
+ALL_ON = 0x23
+WRAM = 0x24
+MIPI = 0x26
+DISPLAY_OFF = 0x28
+DISPLAY_ON = 0x29
+RASET = 0x2B
+CASET = 0x2A
+WDATA = 0x2C
+TEON = 0x35
+MADCTL_CMD = 0x36
+PIXFMT = 0x3A
+BRIGHTNESS = 0x51
+SWIRE1 = 0x5A
+SWIRE2 = 0x5B
+PAGESEL = 0xFE
+
+
+class DriverChip:
+    chips = {}
+
+    def __init__(self, name: str):
+        name = name.upper()
+        self.name = name
+        self.chips[name] = self
+        self.initsequence = []
+
+    def cmd(self, c, *args):
+        """
+        Add a command sequence to the init sequence
+        :param c: The command (8 bit)
+        :param args: zero or more arguments (8 bit values)
+        """
+        self.initsequence.extend([c, len(args)] + list(args))
+
+    def delay(self, ms):
+        self.initsequence.extend([ms, 0xFF])
+
+
+chip = DriverChip("RM67162")
+chip.cmd(PIXFMT, 0x55)
+chip.cmd(BRIGHTNESS, 0)
+
+chip = DriverChip("RM690B0")
+chip.cmd(PAGESEL, 0x20)
+chip.cmd(MIPI, 0x0A)
+chip.cmd(WRAM, 0x80)
+chip.cmd(SWIRE1, 0x51)
+chip.cmd(SWIRE2, 0x2E)
+chip.cmd(PAGESEL, 0x00)
+chip.cmd(0xC2, 0x00)
+chip.delay(10)
+chip.cmd(TEON, 0x00)
+
+chip = DriverChip("AXS15231")
+chip.cmd(0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5A, 0xA5)
+chip.cmd(0xC1, 0x33)
+chip.cmd(0xBB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00)
+
+DriverChip("Custom")
--- a/esphome/components/qspi_amoled/qspi_amoled.cpp
+++ b/esphome/components/qspi_amoled/qspi_amoled.cpp
@@ -1,12 +1,12 @@
 #ifdef USE_ESP_IDF
-#include "qspi_amoled.h"
+#include "qspi_dbi.h"
 #include "esphome/core/log.h"

 namespace esphome {
-namespace qspi_amoled {
+namespace qspi_dbi {

-void QspiAmoLed::setup() {
-  esph_log_config(TAG, "Setting up QSPI_AMOLED");
+void QspiDbi::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up QSPI_DBI");
  this->spi_setup();
  if (this->enable_pin_ != nullptr) {
    this->enable_pin_->setup();
@@ -22,13 +22,17 @@ void QspiAmoLed::setup() {
  }
  this->set_timeout(120, [this] { this->write_command_(SLEEP_OUT); });
  this->set_timeout(240, [this] { this->write_init_sequence_(); });
+  if (this->draw_from_origin_)
+    check_buffer_();
 }

-void QspiAmoLed::update() {
+void QspiDbi::update() {
  if (!this->setup_complete_) {
    return;
  }
  this->do_update_();
+  if (this->buffer_ == nullptr || this->x_low_ > this->x_high_ || this->y_low_ > this->y_high_)
+    return;
  // Start addresses and widths/heights must be divisible by 2 (CASET/RASET restriction in datasheet)
  if (this->x_low_ % 2 == 1) {
    this->x_low_--;
@@ -42,10 +46,15 @@ void QspiAmoLed::update() {
  if (this->y_high_ % 2 == 0) {
    this->y_high_++;
  }
+  if (this->draw_from_origin_) {
+    this->x_low_ = 0;
+    this->y_low_ = 0;
+    this->x_high_ = this->width_ - 1;
+  }
  int w = this->x_high_ - this->x_low_ + 1;
  int h = this->y_high_ - this->y_low_ + 1;
-  this->draw_pixels_at(this->x_low_, this->y_low_, w, h, this->buffer_, this->color_mode_, display::COLOR_BITNESS_565,
-                       true, this->x_low_, this->y_low_, this->get_width_internal() - w - this->x_low_);
+  this->write_to_display_(this->x_low_, this->y_low_, w, h, this->buffer_, this->x_low_, this->y_low_,
+                          this->width_ - w - this->x_low_);
  // invalidate watermarks
  this->x_low_ = this->width_;
  this->y_low_ = this->height_;
@@ -53,21 +62,19 @@ void QspiAmoLed::update() {
  this->y_high_ = 0;
 }

-void QspiAmoLed::draw_absolute_pixel_internal(int x, int y, Color color) {
+void QspiDbi::draw_absolute_pixel_internal(int x, int y, Color color) {
  if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0) {
    return;
  }
-  if (this->buffer_ == nullptr)
-    this->init_internal_(this->width_ * this->height_ * 2);
  if (this->is_failed())
    return;
+  check_buffer_();
  uint32_t pos = (y * this->width_) + x;
-  uint16_t new_color;
  bool updated = false;
  pos = pos * 2;
-  new_color = display::ColorUtil::color_to_565(color, display::ColorOrder::COLOR_ORDER_RGB);
-  if (this->buffer_[pos] != (uint8_t) (new_color >> 8)) {
-    this->buffer_[pos] = (uint8_t) (new_color >> 8);
+  uint16_t new_color = display::ColorUtil::color_to_565(color, display::ColorOrder::COLOR_ORDER_RGB);
+  if (this->buffer_[pos] != static_cast<uint8_t>(new_color >> 8)) {
+    this->buffer_[pos] = static_cast<uint8_t>(new_color >> 8);
    updated = true;
  }
  pos = pos + 1;
@@ -90,7 +97,7 @@ void QspiAmoLed::draw_absolute_pixel_internal(int x, int y, Color color) {
  }
 }

-void QspiAmoLed::reset_params_(bool ready) {
+void QspiDbi::reset_params_(bool ready) {
  if (!ready && !this->is_ready())
    return;
  this->write_command_(this->invert_colors_ ? INVERT_ON : INVERT_OFF);
@@ -102,55 +109,64 @@ void QspiAmoLed::reset_params_(bool ready) {
    mad |= MADCTL_MX;
  if (this->mirror_y_)
    mad |= MADCTL_MY;
-  this->write_command_(MADCTL_CMD, &mad, 1);
-  this->write_command_(BRIGHTNESS, &this->brightness_, 1);
+  this->write_command_(MADCTL_CMD, mad);
+  this->write_command_(BRIGHTNESS, this->brightness_);
+  this->write_command_(NORON);
+  this->write_command_(DISPLAY_ON);
 }

-void QspiAmoLed::write_init_sequence_() {
-  if (this->model_ == RM690B0) {
-    this->write_command_(PAGESEL, 0x20);
-    this->write_command_(MIPI, 0x0A);
-    this->write_command_(WRAM, 0x80);
-    this->write_command_(SWIRE1, 0x51);
-    this->write_command_(SWIRE2, 0x2E);
-    this->write_command_(PAGESEL, 0x00);
-    this->write_command_(0xC2, 0x00);
-    delay(10);
-    this->write_command_(TEON, 0x00);
+void QspiDbi::write_init_sequence_() {
+  for (const auto &seq : this->init_sequences_) {
+    this->write_sequence_(seq);
  }
-  this->write_command_(PIXFMT, 0x55);
-  this->write_command_(BRIGHTNESS, 0);
-  this->write_command_(DISPLAY_ON);
  this->reset_params_(true);
  this->setup_complete_ = true;
-  esph_log_config(TAG, "QSPI_AMOLED setup complete");
+  ESP_LOGCONFIG(TAG, "QSPI_DBI setup complete");
 }

-void QspiAmoLed::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
+void QspiDbi::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
+  ESP_LOGVV(TAG, "Set addr %d/%d, %d/%d", x1, y1, x2, y2);
  uint8_t buf[4];
  x1 += this->offset_x_;
  x2 += this->offset_x_;
  y1 += this->offset_y_;
  y2 += this->offset_y_;
-  put16_be(buf, x1);
-  put16_be(buf + 2, x2);
-  this->write_command_(CASET, buf, sizeof buf);
  put16_be(buf, y1);
  put16_be(buf + 2, y2);
  this->write_command_(RASET, buf, sizeof buf);
+  put16_be(buf, x1);
+  put16_be(buf + 2, x2);
+  this->write_command_(CASET, buf, sizeof buf);
 }

-void QspiAmoLed::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
-                                display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) {
+void QspiDbi::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
+                             display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) {
  if (!this->setup_complete_ || this->is_failed())
    return;
  if (w <= 0 || h <= 0)
    return;
  if (bitness != display::COLOR_BITNESS_565 || order != this->color_mode_ ||
      big_endian != (this->bit_order_ == spi::BIT_ORDER_MSB_FIRST)) {
-    return display::Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset,
-                                            x_pad);
+    return Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset, x_pad);
+  } else if (this->draw_from_origin_) {
+    auto stride = x_offset + w + x_pad;
+    for (int y = 0; y != h; y++) {
+      memcpy(this->buffer_ + ((y + y_start) * this->width_ + x_start) * 2,
+             ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2);
+    }
+    ptr = this->buffer_;
+    w = this->width_;
+    h += y_start;
+    x_start = 0;
+    y_start = 0;
+    x_offset = 0;
+    y_offset = 0;
  }
+  this->write_to_display_(x_start, y_start, w, h, ptr, x_offset, y_offset, x_pad);
+}
+
+void QspiDbi::write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset,
+                                int x_pad) {
  this->set_addr_window_(x_start, y_start, x_start + w - 1, y_start + h - 1);
  this->enable();
  // x_ and y_offset are offsets into the source buffer, unrelated to our own offsets into the display.
@@ -158,17 +174,50 @@ void QspiAmoLed::draw_pixels_at(int x_start, int y_start, int w, int h, const ui
    // we could deal here with a non-zero y_offset, but if x_offset is zero, y_offset probably will be so don't bother
    this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, ptr, w * h * 2, 4);
  } else {
-    this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, nullptr, 0, 4);
    auto stride = x_offset + w + x_pad;
+    uint16_t cmd = 0x2C00;
    for (int y = 0; y != h; y++) {
-      this->write_cmd_addr_data(0, 0, 0, 0, ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2, 4);
+      this->write_cmd_addr_data(8, 0x32, 24, cmd, ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2, 4);
+      cmd = 0x3C00;
    }
  }
  this->disable();
 }
+void QspiDbi::write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) {
+  ESP_LOGV(TAG, "Command %02X, length %d, bytes %s", cmd, len, format_hex_pretty(bytes, len).c_str());
+  this->enable();
+  this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len);
+  this->disable();
+}

-void QspiAmoLed::dump_config() {
-  ESP_LOGCONFIG("", "QSPI AMOLED");
+void QspiDbi::write_sequence_(const std::vector<uint8_t> &vec) {
+  size_t index = 0;
+  while (index != vec.size()) {
+    if (vec.size() - index < 2) {
+      ESP_LOGE(TAG, "Malformed init sequence");
+      return;
+    }
+    uint8_t cmd = vec[index++];
+    uint8_t x = vec[index++];
+    if (x == DELAY_FLAG) {
+      ESP_LOGV(TAG, "Delay %dms", cmd);
+      delay(cmd);
+    } else {
+      uint8_t num_args = x & 0x7F;
+      if (vec.size() - index < num_args) {
+        ESP_LOGE(TAG, "Malformed init sequence");
+        return;
+      }
+      const auto *ptr = vec.data() + index;
+      this->write_command_(cmd, ptr, num_args);
+      index += num_args;
+    }
+  }
+}
+
+void QspiDbi::dump_config() {
+  ESP_LOGCONFIG("", "QSPI_DBI Display");
+  ESP_LOGCONFIG("", "Model: %s", this->model_);
  ESP_LOGCONFIG(TAG, "  Height: %u", this->height_);
  ESP_LOGCONFIG(TAG, "  Width: %u", this->width_);
  LOG_PIN("  CS Pin: ", this->cs_);
@@ -176,6 +225,6 @@ void QspiAmoLed::dump_config() {
  ESP_LOGCONFIG(TAG, "  SPI Data rate: %dMHz", (unsigned) (this->data_rate_ / 1000000));
 }

-}  // namespace qspi_amoled
+}  // namespace qspi_dbi
 }  // namespace esphome
 #endif
--- a/esphome/components/qspi_amoled/qspi_amoled.h
+++ b/esphome/components/qspi_amoled/qspi_amoled.h
@@ -14,11 +14,12 @@
 #include "esp_lcd_panel_rgb.h"

 namespace esphome {
-namespace qspi_amoled {
+namespace qspi_dbi {

-constexpr static const char *const TAG = "display.qspi_amoled";
+constexpr static const char *const TAG = "display.qspi_dbi";
 static const uint8_t SW_RESET_CMD = 0x01;
 static const uint8_t SLEEP_OUT = 0x11;
+static const uint8_t NORON = 0x13;
 static const uint8_t INVERT_OFF = 0x20;
 static const uint8_t INVERT_ON = 0x21;
 static const uint8_t ALL_ON = 0x23;
@@ -42,6 +43,7 @@ static const uint8_t MADCTL_MV = 0x20;   ///< Bit 5 Reverse Mode
 static const uint8_t MADCTL_RGB = 0x00;  ///< Bit 3 Red-Green-Blue pixel order
 static const uint8_t MADCTL_BGR = 0x08;  ///< Bit 3 Blue-Green-Red pixel order

+static const uint8_t DELAY_FLAG = 0xFF;
 // store a 16 bit value in a buffer, big endian.
 static inline void put16_be(uint8_t *buf, uint16_t value) {
  buf[0] = value >> 8;
@@ -49,15 +51,16 @@ static inline void put16_be(uint8_t *buf, uint16_t value) {
 }

 enum Model {
+  CUSTOM,
  RM690B0,
  RM67162,
 };

-class QspiAmoLed : public display::DisplayBuffer,
-                   public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
-                                         spi::DATA_RATE_1MHZ> {
+class QspiDbi : public display::DisplayBuffer,
+                public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
+                                      spi::DATA_RATE_1MHZ> {
 public:
-  void set_model(Model model) { this->model_ = model; }
+  void set_model(const char *model) { this->model_ = model; }
  void update() override;
  void setup() override;
  display::ColorOrder get_color_mode() { return this->color_mode_; }
@@ -93,17 +96,27 @@ class QspiAmoLed : public display::DisplayBuffer,
    this->offset_x_ = offset_x;
    this->offset_y_ = offset_y;
  }
+
+  void set_draw_from_origin(bool draw_from_origin) { this->draw_from_origin_ = draw_from_origin; }
  display::DisplayType get_display_type() override { return display::DisplayType::DISPLAY_TYPE_COLOR; }
  void dump_config() override;

  int get_width_internal() override { return this->width_; }
  int get_height_internal() override { return this->height_; }
  bool can_proceed() override { return this->setup_complete_; }
+  void add_init_sequence(const std::vector<uint8_t> &sequence) { this->init_sequences_.push_back(sequence); }

 protected:
+  void check_buffer_() {
+    if (this->buffer_ == nullptr)
+      this->init_internal_(this->width_ * this->height_ * 2);
+  }
+  void write_sequence_(const std::vector<uint8_t> &vec);
  void draw_absolute_pixel_internal(int x, int y, Color color) override;
  void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
                      display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
+  void write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset,
+                         int x_pad);
  /**
   * the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the
   * sample code.)
@@ -122,11 +135,7 @@ class QspiAmoLed : public display::DisplayBuffer,
   * @param bytes
   * @param len
   */
-  void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) {
-    this->enable();
-    this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len);
-    this->disable();
-  }
+  void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len);

  void write_command_(uint8_t cmd, uint8_t data) { this->write_command_(cmd, &data, 1); }
  void write_command_(uint8_t cmd) { this->write_command_(cmd, &cmd, 0); }
@@ -136,8 +145,8 @@ class QspiAmoLed : public display::DisplayBuffer,

  GPIOPin *reset_pin_{nullptr};
  GPIOPin *enable_pin_{nullptr};
-  uint16_t x_low_{0};
-  uint16_t y_low_{0};
+  uint16_t x_low_{1};
+  uint16_t y_low_{1};
  uint16_t x_high_{0};
  uint16_t y_high_{0};
  bool setup_complete_{};
@@ -151,12 +160,14 @@ class QspiAmoLed : public display::DisplayBuffer,
  bool swap_xy_{};
  bool mirror_x_{};
  bool mirror_y_{};
+  bool draw_from_origin_{false};
  uint8_t brightness_{0xD0};
-  Model model_{RM690B0};
+  const char *model_{"Unknown"};
+  std::vector<std::vector<uint8_t>> init_sequences_{};

  esp_lcd_panel_handle_t handle_{};
 };

-}  // namespace qspi_amoled
+}  // namespace qspi_dbi
 }  // namespace esphome
 #endif
--- a/esphome/components/st7701s/display.py
+++ b/esphome/components/st7701s/display.py
@@ -18,6 +18,7 @@ from esphome.const import (
    CONF_HSYNC_PIN,
    CONF_ID,
    CONF_IGNORE_STRAPPING_WARNING,
+    CONF_INIT_SEQUENCE,
    CONF_INVERT_COLORS,
    CONF_LAMBDA,
    CONF_MIRROR_X,
@@ -35,7 +36,6 @@ from esphome.core import TimePeriod

 from .init_sequences import ST7701S_INITS, cmd

-CONF_INIT_SEQUENCE = "init_sequence"
 CONF_DE_PIN = "de_pin"
 CONF_PCLK_PIN = "pclk_pin"

--- a/esphome/const.py
+++ b/esphome/const.py
@@ -398,6 +398,7 @@ CONF_INCLUDES = "includes"
 CONF_INDEX = "index"
 CONF_INDOOR = "indoor"
 CONF_INFRARED = "infrared"
+CONF_INIT_SEQUENCE = "init_sequence"
 CONF_INITIAL_MODE = "initial_mode"
 CONF_INITIAL_OPTION = "initial_option"
 CONF_INITIAL_STATE = "initial_state"
--- a/tests/components/qspi_amoled/common.yaml
+++ b/tests/components/qspi_amoled/common.yaml
@@ -5,7 +5,7 @@ spi:
  data_pins: [14, 10, 16, 12]

 display:
-  - platform: qspi_amoled
+  - platform: qspi_dbi
    model: RM690B0
    data_rate: 80MHz
    spi_mode: mode0
@@ -20,9 +20,10 @@ display:
    reset_pin: 13
    enable_pin: 9

-  - platform: qspi_amoled
-    model: RM67162
+  - platform: qspi_dbi
+    model: CUSTOM
    id: main_lcd
+    draw_from_origin: true
    dimensions:
      height: 240
      width: 536
@@ -34,3 +35,10 @@ display:
    cs_pin: 6
    reset_pin: 17
    enable_pin: 38
+    init_sequence:
+      - [0x3A, 0x66]
+      - [0x11]
+      - delay 120ms
+      - [0x29]
+      - delay 20ms
+
--- a/tests/components/qspi_amoled/test.esp32-s3-idf.yaml
+++ b/tests/components/qspi_amoled/test.esp32-s3-idf.yaml