Merge pull request #10796 from esphome/bump-2025.9.1

2025.9.1

.ai/instructions.md

@@ -9,7 +9,7 @@ This document provides essential context for AI models interacting with this pro
 
 ## 2. Core Technologies & Stack
 
-*   **Languages:** Python (>=3.10), C++ (gnu++20)
+*   **Languages:** Python (>=3.11), C++ (gnu++20)
 *   **Frameworks & Runtimes:** PlatformIO, Arduino, ESP-IDF.
 *   **Build Systems:** PlatformIO is the primary build system. CMake is used as an alternative.
 *   **Configuration:** YAML.
@@ -38,7 +38,7 @@ This document provides essential context for AI models interacting with this pro
     5.  **Dashboard** (`esphome/dashboard/`): A web-based interface for device configuration, management, and OTA updates.
 
 *   **Platform Support:**
-    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (S2, S3, C3, etc.) and both IDF and Arduino frameworks.
+    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (Original, C2, C3, C5, C6, H2, P4, S2, S3) with ESP-IDF framework. Arduino framework supports only a subset of the variants (Original, C3, S2, S3).
     2.  **ESP8266** (`components/esp8266/`): Espressif ESP8266. Arduino framework only, with memory constraints.
     3.  **RP2040** (`components/rp2040/`): Raspberry Pi Pico/RP2040. Arduino framework with PIO (Programmable I/O) support.
     4.  **LibreTiny** (`components/libretiny/`): Realtek and Beken chips. Supports multiple chip families and auto-generated components.
@@ -60,7 +60,7 @@ This document provides essential context for AI models interacting with this pro
         ├── __init__.py          # Component configuration schema and code generation
         ├── [component].h        # C++ header file (if needed)
         ├── [component].cpp      # C++ implementation (if needed)
-        └── [platform]/         # Platform-specific implementations
+        └── [platform]/          # Platform-specific implementations
             ├── __init__.py      # Platform-specific configuration
             ├── [platform].h     # Platform C++ header
             └── [platform].cpp   # Platform C++ implementation
@@ -150,7 +150,8 @@ This document provides essential context for AI models interacting with this pro
 *   **Configuration Validation:**
     *   **Common Validators:** `cv.int_`, `cv.float_`, `cv.string`, `cv.boolean`, `cv.int_range(min=0, max=100)`, `cv.positive_int`, `cv.percentage`.
     *   **Complex Validation:** `cv.All(cv.string, cv.Length(min=1, max=50))`, `cv.Any(cv.int_, cv.string)`.
-    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `cv.only_with_arduino`.
+    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `esp32.only_on_variant(...)`, `cv.only_on_esp32`, `cv.only_on_esp8266`, `cv.only_on_rp2040`.
+    *   **Framework-Specific:** `cv.only_with_framework(...)`, `cv.only_with_arduino`, `cv.only_with_esp_idf`.
     *   **Schema Extensions:**
         ```python
         CONFIG_SCHEMA = cv.Schema({ ... })

.clang-tidy.hash

@@ -1 +1 @@
-6af8b429b94191fe8e239fcb3b73f7982d0266cb5b05ffbc81edaeac1bc8c273
+4368db58e8f884aff245996b1e8b644cc0796c0bb2fa706d5740d40b823d3ac9

.github/actions/restore-python/action.yml

@@ -17,12 +17,12 @@ runs:
   steps:
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v5.6.0
+      uses: actions/setup-python@v6.0.0
       with:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment
       id: cache-venv
-      uses: actions/cache/restore@v4.2.3
+      uses: actions/cache/restore@v4.2.4
       with:
         path: venv
         # yamllint disable-line rule:line-length

.github/workflows/auto-label-pr.yml

@@ -22,7 +22,7 @@ jobs:
     if: github.event.action != 'labeled' || github.event.sender.type != 'Bot'
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
 
       - name: Generate a token
         id: generate-token
@@ -32,7 +32,7 @@ jobs:
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
 
       - name: Auto Label PR
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ steps.generate-token.outputs.token }}
           script: |
@@ -105,7 +105,9 @@ jobs:
 
             // Calculate data from PR files
             const changedFiles = prFiles.map(file => file.filename);
-            const totalChanges = prFiles.reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
+            const totalAdditions = prFiles.reduce((sum, file) => sum + (file.additions || 0), 0);
+            const totalDeletions = prFiles.reduce((sum, file) => sum + (file.deletions || 0), 0);
+            const totalChanges = totalAdditions + totalDeletions;
 
             console.log('Current labels:', currentLabels.join(', '));
             console.log('Changed files:', changedFiles.length);
@@ -231,16 +233,21 @@ jobs:
             // Strategy: PR size detection
             async function detectPRSize() {
               const labels = new Set();
-              const testChanges = prFiles
-                .filter(file => file.filename.startsWith('tests/'))
-                .reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
-
-              const nonTestChanges = totalChanges - testChanges;
 
               if (totalChanges <= SMALL_PR_THRESHOLD) {
                 labels.add('small-pr');
+                return labels;
               }
 
+              const testAdditions = prFiles
+                .filter(file => file.filename.startsWith('tests/'))
+                .reduce((sum, file) => sum + (file.additions || 0), 0);
+              const testDeletions = prFiles
+                .filter(file => file.filename.startsWith('tests/'))
+                .reduce((sum, file) => sum + (file.deletions || 0), 0);
+
+              const nonTestChanges = (totalAdditions - testAdditions) - (totalDeletions - testDeletions);
+
               // Don't add too-big if mega-pr label is already present
               if (nonTestChanges > TOO_BIG_THRESHOLD && !isMegaPR) {
                 labels.add('too-big');
@@ -375,7 +382,7 @@ jobs:
               const labels = new Set();
 
               // Check for missing tests
-              if ((allLabels.has('new-component') || allLabels.has('new-platform')) && !allLabels.has('has-tests')) {
+              if ((allLabels.has('new-component') || allLabels.has('new-platform') || allLabels.has('new-feature')) && !allLabels.has('has-tests')) {
                 labels.add('needs-tests');
               }
 
@@ -412,10 +419,13 @@ jobs:
 
               // Too big message
               if (finalLabels.includes('too-big')) {
-                const testChanges = prFiles
+                const testAdditions = prFiles
                   .filter(file => file.filename.startsWith('tests/'))
-                  .reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
-                const nonTestChanges = totalChanges - testChanges;
+                  .reduce((sum, file) => sum + (file.additions || 0), 0);
+                const testDeletions = prFiles
+                  .filter(file => file.filename.startsWith('tests/'))
+                  .reduce((sum, file) => sum + (file.deletions || 0), 0);
+                const nonTestChanges = (totalAdditions - testAdditions) - (totalDeletions - testDeletions);
 
                 const tooManyLabels = finalLabels.length > MAX_LABELS;
                 const tooManyChanges = nonTestChanges > TOO_BIG_THRESHOLD;

.github/workflows/ci-api-proto.yml

@@ -21,9 +21,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -47,7 +47,7 @@ jobs:
           fi
       - if: failure()
         name: Review PR
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             await github.rest.pulls.createReview({
@@ -70,7 +70,7 @@ jobs:
             esphome/components/api/api_pb2_service.*
       - if: success()
         name: Dismiss review
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             let reviews = await github.rest.pulls.listReviews({

.github/workflows/ci-clang-tidy-hash.yml

@@ -20,10 +20,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
 
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -41,7 +41,7 @@ jobs:
 
       - if: failure()
         name: Request changes
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             await github.rest.pulls.createReview({
@@ -54,7 +54,7 @@ jobs:
 
       - if: success()
         name: Dismiss review
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             let reviews = await github.rest.pulls.listReviews({

.github/workflows/ci-docker.yml

@@ -43,9 +43,9 @@ jobs:
           - "docker"
           # - "lint"
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
       - name: Set up Docker Buildx

.github/workflows/ci.yml

@@ -36,18 +36,18 @@ jobs:
       cache-key: ${{ steps.cache-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Generate cache-key
         id: cache-key
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_test.txt', '.pre-commit-config.yaml') }}" >> $GITHUB_OUTPUT
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v4.2.3
+        uses: actions/cache@v4.2.4
         with:
           path: venv
           # yamllint disable-line rule:line-length
@@ -70,7 +70,7 @@ jobs:
     if: needs.determine-jobs.outputs.python-linters == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -91,7 +91,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -136,7 +136,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         id: restore-python
         uses: ./.github/actions/restore-python
@@ -156,12 +156,12 @@ jobs:
           . venv/bin/activate
           pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v5.4.3
+        uses: codecov/codecov-action@v5.5.1
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
       - name: Save Python virtual environment cache
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache/save@v4.2.3
+        uses: actions/cache/save@v4.2.4
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.restore-python.outputs.python-version }}-venv-${{ needs.common.outputs.cache-key }}
@@ -179,7 +179,7 @@ jobs:
       component-test-count: ${{ steps.determine.outputs.component-test-count }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
         with:
           # Fetch enough history to find the merge base
           fetch-depth: 2
@@ -214,15 +214,15 @@ jobs:
     if: needs.determine-jobs.outputs.integration-tests == 'true'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Set up Python 3.13
         id: python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.13"
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v4.2.3
+        uses: actions/cache@v4.2.4
         with:
           path: venv
           key: ${{ runner.os }}-${{ steps.python.outputs.python-version }}-venv-${{ needs.common.outputs.cache-key }}
@@ -287,7 +287,7 @@ jobs:
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
         with:
           # Need history for HEAD~1 to work for checking changed files
           fetch-depth: 2
@@ -300,14 +300,14 @@ jobs:
 
       - name: Cache platformio
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache@v4.2.3
+        uses: actions/cache@v4.2.4
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
 
       - name: Cache platformio
         if: github.ref != 'refs/heads/dev'
-        uses: actions/cache/restore@v4.2.3
+        uses: actions/cache/restore@v4.2.4
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
@@ -374,7 +374,7 @@ jobs:
           sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -400,7 +400,7 @@ jobs:
       matrix: ${{ steps.split.outputs.components }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Split components into 20 groups
         id: split
         run: |
@@ -430,7 +430,7 @@ jobs:
           sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -459,7 +459,7 @@ jobs:
     if: github.event_name == 'pull_request' && github.base_ref != 'beta' && github.base_ref != 'release'
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:

.github/workflows/codeowner-review-request.yml

@@ -25,7 +25,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Request reviews from component codeowners
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             const owner = context.repo.owner;

.github/workflows/codeql.yml

@@ -54,7 +54,7 @@ jobs:
             # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5.0.0
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL

.github/workflows/external-component-bot.yml

@@ -15,7 +15,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Add external component comment
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/issue-codeowner-notify.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Notify codeowners for component issues
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             const owner = context.repo.owner;

.github/workflows/needs-docs.yml

@@ -1,24 +0,0 @@
-name: Needs Docs
-
-on:
-  pull_request:
-    types: [labeled, unlabeled]
-
-jobs:
-  check:
-    name: Check
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check for needs-docs label
-        uses: actions/github-script@v7.0.1
-        with:
-          script: |
-            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-            const needsDocs = labels.find(label => label.name === 'needs-docs');
-            if (needsDocs) {
-              core.setFailed('Pull request needs docs');
-            }

.github/workflows/release.yml

@@ -20,7 +20,7 @@ jobs:
       branch_build: ${{ steps.tag.outputs.branch_build }}
       deploy_env: ${{ steps.tag.outputs.deploy_env }}
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v5.0.0
       - name: Get tag
         id: tag
         # yamllint disable rule:line-length
@@ -60,9 +60,9 @@ jobs:
       contents: read
       id-token: write
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.x"
       - name: Build
@@ -70,7 +70,7 @@ jobs:
           pip3 install build
           python3 -m build
       - name: Publish
-        uses: pypa/gh-action-pypi-publish@v1.12.4
+        uses: pypa/gh-action-pypi-publish@v1.13.0
         with:
           skip-existing: true
 
@@ -92,9 +92,9 @@ jobs:
             os: "ubuntu-24.04-arm"
 
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -168,10 +168,10 @@ jobs:
           - ghcr
           - dockerhub
     steps:
-      - uses: actions/checkout@v4.2.2
+      - uses: actions/checkout@v5.0.0
 
       - name: Download digests
-        uses: actions/download-artifact@v4.3.0
+        uses: actions/download-artifact@v5.0.0
         with:
           pattern: digests-*
           path: /tmp/digests
@@ -220,7 +220,7 @@ jobs:
       - deploy-manifest
     steps:
       - name: Trigger Workflow
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
           script: |
@@ -246,7 +246,7 @@ jobs:
     environment: ${{ needs.init.outputs.deploy_env }}
     steps:
       - name: Trigger Workflow
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.DEPLOY_ESPHOME_SCHEMA_REPO_TOKEN }}
           script: |

.github/workflows/stale.yml

@@ -17,7 +17,7 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v9.1.0
+      - uses: actions/stale@v10.0.0
         with:
           days-before-pr-stale: 90
           days-before-pr-close: 7
@@ -37,7 +37,7 @@ jobs:
   close-issues:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v9.1.0
+      - uses: actions/stale@v10.0.0
         with:
           days-before-pr-stale: -1
           days-before-pr-close: -1

.github/workflows/status-check-labels.yml

@@ -0,0 +1,30 @@
+name: Status check labels
+
+on:
+  pull_request:
+    types: [labeled, unlabeled]
+
+jobs:
+  check:
+    name: Check ${{ matrix.label }}
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        label:
+          - needs-docs
+          - merge-after-release
+    steps:
+      - name: Check for ${{ matrix.label }} label
+        uses: actions/github-script@v8.0.0
+        with:
+          script: |
+            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number
+            });
+            const hasLabel = labels.find(label => label.name === '${{ matrix.label }}');
+            if (hasLabel) {
+              core.setFailed('Pull request cannot be merged, it is labeled as ${{ matrix.label }}');
+            }

.github/workflows/sync-device-classes.yml

@@ -13,16 +13,16 @@ jobs:
     if: github.repository == 'esphome/esphome'
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
 
       - name: Checkout Home Assistant
-        uses: actions/checkout@v4.2.2
+        uses: actions/checkout@v5.0.0
         with:
           repository: home-assistant/core
           path: lib/home-assistant
 
       - name: Setup Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: 3.13
 

.pre-commit-config.yaml

@@ -11,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.12.7
+    rev: v0.12.12
     hooks:
       # Run the linter.
       - id: ruff

CODEOWNERS

@@ -66,7 +66,7 @@ esphome/components/binary_sensor/* @esphome/core
 esphome/components/bk72xx/* @kuba2k2
 esphome/components/bl0906/* @athom-tech @jesserockz @tarontop
 esphome/components/bl0939/* @ziceva
-esphome/components/bl0940/* @tobias-
+esphome/components/bl0940/* @dan-s-github @tobias-
 esphome/components/bl0942/* @dbuezas @dwmw2
 esphome/components/ble_client/* @buxtronix @clydebarrow
 esphome/components/bluetooth_proxy/* @bdraco @jesserockz
@@ -88,7 +88,8 @@ esphome/components/bp1658cj/* @Cossid
 esphome/components/bp5758d/* @Cossid
 esphome/components/button/* @esphome/core
 esphome/components/bytebuffer/* @clydebarrow
-esphome/components/camera/* @DT-art1 @bdraco
+esphome/components/camera/* @bdraco @DT-art1
+esphome/components/camera_encoder/* @DT-art1
 esphome/components/canbus/* @danielschramm @mvturnho
 esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @esphome/core
@@ -144,9 +145,9 @@ esphome/components/es8156/* @kbx81
 esphome/components/es8311/* @kahrendt @kroimon
 esphome/components/es8388/* @P4uLT
 esphome/components/esp32/* @esphome/core
-esphome/components/esp32_ble/* @Rapsssito @bdraco @jesserockz
+esphome/components/esp32_ble/* @bdraco @jesserockz @Rapsssito
 esphome/components/esp32_ble_client/* @bdraco @jesserockz
-esphome/components/esp32_ble_server/* @Rapsssito @clydebarrow @jesserockz
+esphome/components/esp32_ble_server/* @clydebarrow @jesserockz @Rapsssito
 esphome/components/esp32_ble_tracker/* @bdraco
 esphome/components/esp32_camera_web_server/* @ayufan
 esphome/components/esp32_can/* @Sympatron
@@ -166,7 +167,7 @@ esphome/components/ezo_pmp/* @carlos-sarmiento
 esphome/components/factory_reset/* @anatoly-savchenkov
 esphome/components/fastled_base/* @OttoWinter
 esphome/components/feedback/* @ianchi
-esphome/components/fingerprint_grow/* @OnFreund @alexborro @loongyh
+esphome/components/fingerprint_grow/* @alexborro @loongyh @OnFreund
 esphome/components/font/* @clydebarrow @esphome/core
 esphome/components/fs3000/* @kahrendt
 esphome/components/ft5x06/* @clydebarrow
@@ -202,7 +203,7 @@ esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
 esphome/components/hm3301/* @freekode
 esphome/components/hmac_md5/* @dwmw2
-esphome/components/homeassistant/* @OttoWinter @esphome/core
+esphome/components/homeassistant/* @esphome/core @OttoWinter
 esphome/components/homeassistant/number/* @landonr
 esphome/components/homeassistant/switch/* @Links2004
 esphome/components/honeywell_hih_i2c/* @Benichou34
@@ -227,13 +228,13 @@ esphome/components/iaqcore/* @yozik04
 esphome/components/ili9xxx/* @clydebarrow @nielsnl68
 esphome/components/improv_base/* @esphome/core
 esphome/components/improv_serial/* @esphome/core
-esphome/components/ina226/* @Sergio303 @latonita
+esphome/components/ina226/* @latonita @Sergio303
 esphome/components/ina260/* @mreditor97
 esphome/components/ina2xx_base/* @latonita
 esphome/components/ina2xx_i2c/* @latonita
 esphome/components/ina2xx_spi/* @latonita
 esphome/components/inkbird_ibsth1_mini/* @fkirill
-esphome/components/inkplate6/* @jesserockz
+esphome/components/inkplate/* @jesserockz @JosipKuci
 esphome/components/integration/* @OttoWinter
 esphome/components/internal_temperature/* @Mat931
 esphome/components/interval/* @esphome/core
@@ -246,6 +247,7 @@ esphome/components/kuntze/* @ssieb
 esphome/components/lc709203f/* @ilikecake
 esphome/components/lcd_menu/* @numo68
 esphome/components/ld2410/* @regevbr @sebcaps
+esphome/components/ld2412/* @Rihan9
 esphome/components/ld2420/* @descipher
 esphome/components/ld2450/* @hareeshmu
 esphome/components/ld24xx/* @kbx81
@@ -275,8 +277,8 @@ esphome/components/max7219digit/* @rspaargaren
 esphome/components/max9611/* @mckaymatthew
 esphome/components/mcp23008/* @jesserockz
 esphome/components/mcp23017/* @jesserockz
-esphome/components/mcp23s08/* @SenexCrenshaw @jesserockz
-esphome/components/mcp23s17/* @SenexCrenshaw @jesserockz
+esphome/components/mcp23s08/* @jesserockz @SenexCrenshaw
+esphome/components/mcp23s17/* @jesserockz @SenexCrenshaw
 esphome/components/mcp23x08_base/* @jesserockz
 esphome/components/mcp23x17_base/* @jesserockz
 esphome/components/mcp23xxx_base/* @jesserockz
@@ -297,6 +299,7 @@ esphome/components/mics_4514/* @jesserockz
 esphome/components/midea/* @dudanov
 esphome/components/midea_ir/* @dudanov
 esphome/components/mipi_dsi/* @clydebarrow
+esphome/components/mipi_rgb/* @clydebarrow
 esphome/components/mipi_spi/* @clydebarrow
 esphome/components/mitsubishi/* @RubyBailey
 esphome/components/mixer/speaker/* @kahrendt
@@ -340,7 +343,7 @@ esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/packet_transport/* @clydebarrow
 esphome/components/pca6416a/* @Mat931
-esphome/components/pca9554/* @clydebarrow @hwstar
+esphome/components/pca9554/* @bdraco @clydebarrow @hwstar
 esphome/components/pcf85063/* @brogon
 esphome/components/pcf8563/* @KoenBreeman
 esphome/components/pi4ioe5v6408/* @jesserockz
@@ -351,9 +354,9 @@ esphome/components/pm2005/* @andrewjswan
 esphome/components/pmsa003i/* @sjtrny
 esphome/components/pmsx003/* @ximex
 esphome/components/pmwcs3/* @SeByDocKy
-esphome/components/pn532/* @OttoWinter @jesserockz
-esphome/components/pn532_i2c/* @OttoWinter @jesserockz
-esphome/components/pn532_spi/* @OttoWinter @jesserockz
+esphome/components/pn532/* @jesserockz @OttoWinter
+esphome/components/pn532_i2c/* @jesserockz @OttoWinter
+esphome/components/pn532_spi/* @jesserockz @OttoWinter
 esphome/components/pn7150/* @jesserockz @kbx81
 esphome/components/pn7150_i2c/* @jesserockz @kbx81
 esphome/components/pn7160/* @jesserockz @kbx81
@@ -362,7 +365,7 @@ esphome/components/pn7160_spi/* @jesserockz @kbx81
 esphome/components/power_supply/* @esphome/core
 esphome/components/preferences/* @esphome/core
 esphome/components/psram/* @esphome/core
-esphome/components/pulse_meter/* @TrentHouliston @cstaahl @stevebaxter
+esphome/components/pulse_meter/* @cstaahl @stevebaxter @TrentHouliston
 esphome/components/pvvx_mithermometer/* @pasiz
 esphome/components/pylontech/* @functionpointer
 esphome/components/qmp6988/* @andrewpc
@@ -403,7 +406,7 @@ esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
 esphome/components/sfa30/* @ghsensdev
 esphome/components/sgp40/* @SenexCrenshaw
-esphome/components/sgp4x/* @SenexCrenshaw @martgras
+esphome/components/sgp4x/* @martgras @SenexCrenshaw
 esphome/components/shelly_dimmer/* @edge90 @rnauber
 esphome/components/sht3xd/* @mrtoy-me
 esphome/components/sht4x/* @sjtrny

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2025.8.0-dev
+PROJECT_NUMBER         = 2025.9.1
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

docker/build.py

@@ -90,7 +90,7 @@ def main():
     def run_command(*cmd, ignore_error: bool = False):
         print(f"$ {shlex.join(list(cmd))}")
         if not args.dry_run:
-            rc = subprocess.call(list(cmd))
+            rc = subprocess.call(list(cmd), close_fds=False)
             if rc != 0 and not ignore_error:
                 print("Command failed")
                 sys.exit(1)

esphome/__main__.py

@@ -15,9 +15,11 @@ import argcomplete
 
 from esphome import const, writer, yaml_util
 import esphome.codegen as cg
+from esphome.components.mqtt import CONF_DISCOVER_IP
 from esphome.config import iter_component_configs, read_config, strip_default_ids
 from esphome.const import (
     ALLOWED_NAME_CHARS,
+    CONF_API,
     CONF_BAUD_RATE,
     CONF_BROKER,
     CONF_DEASSERT_RTS_DTR,
@@ -43,6 +45,7 @@ from esphome.const import (
     SECRETS_FILES,
 )
 from esphome.core import CORE, EsphomeError, coroutine
+from esphome.enum import StrEnum
 from esphome.helpers import get_bool_env, indent, is_ip_address
 from esphome.log import AnsiFore, color, setup_log
 from esphome.types import ConfigType
@@ -106,13 +109,15 @@ def choose_prompt(options, purpose: str = None):
     return options[opt - 1][1]
 
 
+class Purpose(StrEnum):
+    UPLOADING = "uploading"
+    LOGGING = "logging"
+
+
 def choose_upload_log_host(
     default: list[str] | str | None,
     check_default: str | None,
-    show_ota: bool,
-    show_mqtt: bool,
-    show_api: bool,
-    purpose: str | None = None,
+    purpose: Purpose,
 ) -> list[str]:
     # Convert to list for uniform handling
     defaults = [default] if isinstance(default, str) else default or []
@@ -132,53 +137,145 @@ def choose_upload_log_host(
                 ]
                 resolved.append(choose_prompt(options, purpose=purpose))
             elif device == "OTA":
-                if (show_ota and "ota" in CORE.config) or (
-                    show_api and "api" in CORE.config
+                # ensure IP adresses are used first
+                if is_ip_address(CORE.address) and (
+                    (purpose == Purpose.LOGGING and has_api())
+                    or (purpose == Purpose.UPLOADING and has_ota())
                 ):
                     resolved.append(CORE.address)
-                elif show_mqtt and has_mqtt_logging():
-                    resolved.append("MQTT")
+
+                if purpose == Purpose.LOGGING:
+                    if has_api() and has_mqtt_ip_lookup():
+                        resolved.append("MQTTIP")
+
+                    if has_mqtt_logging():
+                        resolved.append("MQTT")
+
+                    if has_api() and has_non_ip_address():
+                        resolved.append(CORE.address)
+
+                elif purpose == Purpose.UPLOADING:
+                    if has_ota() and has_mqtt_ip_lookup():
+                        resolved.append("MQTTIP")
+
+                    if has_ota() and has_non_ip_address():
+                        resolved.append(CORE.address)
+
             else:
                 resolved.append(device)
+        if not resolved:
+            _LOGGER.error("All specified devices: %s could not be resolved.", defaults)
         return resolved
 
     # No devices specified, show interactive chooser
     options = [
         (f"{port.path} ({port.description})", port.path) for port in get_serial_ports()
     ]
-    if (show_ota and "ota" in CORE.config) or (show_api and "api" in CORE.config):
-        options.append((f"Over The Air ({CORE.address})", CORE.address))
-    if show_mqtt and has_mqtt_logging():
-        mqtt_config = CORE.config[CONF_MQTT]
-        options.append((f"MQTT ({mqtt_config[CONF_BROKER]})", "MQTT"))
+
+    if purpose == Purpose.LOGGING:
+        if has_mqtt_logging():
+            mqtt_config = CORE.config[CONF_MQTT]
+            options.append((f"MQTT ({mqtt_config[CONF_BROKER]})", "MQTT"))
+
+        if has_api():
+            if has_resolvable_address():
+                options.append((f"Over The Air ({CORE.address})", CORE.address))
+            if has_mqtt_ip_lookup():
+                options.append(("Over The Air (MQTT IP lookup)", "MQTTIP"))
+
+    elif purpose == Purpose.UPLOADING and has_ota():
+        if has_resolvable_address():
+            options.append((f"Over The Air ({CORE.address})", CORE.address))
+        if has_mqtt_ip_lookup():
+            options.append(("Over The Air (MQTT IP lookup)", "MQTTIP"))
 
     if check_default is not None and check_default in [opt[1] for opt in options]:
         return [check_default]
     return [choose_prompt(options, purpose=purpose)]
 
 
-def mqtt_logging_enabled(mqtt_config):
+def has_mqtt_logging() -> bool:
+    """Check if MQTT logging is available."""
+    if CONF_MQTT not in CORE.config:
+        return False
+
+    mqtt_config = CORE.config[CONF_MQTT]
+
+    # enabled by default
+    if CONF_LOG_TOPIC not in mqtt_config:
+        return True
+
     log_topic = mqtt_config[CONF_LOG_TOPIC]
     if log_topic is None:
         return False
+
     if CONF_TOPIC not in log_topic:
         return False
+
     return log_topic.get(CONF_LEVEL, None) != "NONE"
 
 
-def has_mqtt_logging() -> bool:
-    """Check if MQTT logging is available."""
-    return (mqtt_config := CORE.config.get(CONF_MQTT)) and mqtt_logging_enabled(
-        mqtt_config
-    )
+def has_mqtt() -> bool:
+    """Check if MQTT is available."""
+    return CONF_MQTT in CORE.config
+
+
+def has_api() -> bool:
+    """Check if API is available."""
+    return CONF_API in CORE.config
+
+
+def has_ota() -> bool:
+    """Check if OTA is available."""
+    return CONF_OTA in CORE.config
+
+
+def has_mqtt_ip_lookup() -> bool:
+    """Check if MQTT is available and IP lookup is supported."""
+    if CONF_MQTT not in CORE.config:
+        return False
+    # Default Enabled
+    if CONF_DISCOVER_IP not in CORE.config[CONF_MQTT]:
+        return True
+    return CORE.config[CONF_MQTT][CONF_DISCOVER_IP]
+
+
+def has_mdns() -> bool:
+    """Check if MDNS is available."""
+    return CONF_MDNS not in CORE.config or not CORE.config[CONF_MDNS][CONF_DISABLED]
+
+
+def has_non_ip_address() -> bool:
+    """Check if CORE.address is set and is not an IP address."""
+    return CORE.address is not None and not is_ip_address(CORE.address)
+
+
+def has_ip_address() -> bool:
+    """Check if CORE.address is a valid IP address."""
+    return CORE.address is not None and is_ip_address(CORE.address)
+
+
+def has_resolvable_address() -> bool:
+    """Check if CORE.address is resolvable (via mDNS or is an IP address)."""
+    return has_mdns() or has_ip_address()
+
+
+def mqtt_get_ip(config: ConfigType, username: str, password: str, client_id: str):
+    from esphome import mqtt
+
+    return mqtt.get_esphome_device_ip(config, username, password, client_id)
+
+
+_PORT_TO_PORT_TYPE = {
+    "MQTT": "MQTT",
+    "MQTTIP": "MQTTIP",
+}
 
 
 def get_port_type(port: str) -> str:
     if port.startswith("/") or port.startswith("COM"):
         return "SERIAL"
-    if port == "MQTT":
-        return "MQTT"
-    return "NETWORK"
+    return _PORT_TO_PORT_TYPE.get(port, "NETWORK")
 
 
 def run_miniterm(config: ConfigType, port: str, args) -> int:
@@ -223,7 +320,9 @@ def run_miniterm(config: ConfigType, port: str, args) -> int:
                         .replace(b"\n", b"")
                         .decode("utf8", "backslashreplace")
                     )
-                    time_str = datetime.now().time().strftime("[%H:%M:%S]")
+                    time_ = datetime.now()
+                    nanoseconds = time_.microsecond // 1000
+                    time_str = f"[{time_.hour:02}:{time_.minute:02}:{time_.second:02}.{nanoseconds:03}]"
                     safe_print(parser.parse_line(line, time_str))
 
                     backtrace_state = platformio_api.process_stacktrace(
@@ -393,27 +492,29 @@ def check_permissions(port: str):
             )
 
 
-def upload_program(config: ConfigType, args: ArgsProtocol, host: str) -> int | str:
+def upload_program(
+    config: ConfigType, args: ArgsProtocol, devices: list[str]
+) -> tuple[int, str | None]:
+    host = devices[0]
     try:
         module = importlib.import_module("esphome.components." + CORE.target_platform)
         if getattr(module, "upload_program")(config, args, host):
-            return 0
+            return 0, host
     except AttributeError:
         pass
 
     if get_port_type(host) == "SERIAL":
         check_permissions(host)
+
+        exit_code = 1
         if CORE.target_platform in (PLATFORM_ESP32, PLATFORM_ESP8266):
             file = getattr(args, "file", None)
-            return upload_using_esptool(config, host, file, args.upload_speed)
+            exit_code = upload_using_esptool(config, host, file, args.upload_speed)
+        elif CORE.target_platform == PLATFORM_RP2040 or CORE.is_libretiny:
+            exit_code = upload_using_platformio(config, host)
+        # else: Unknown target platform, exit_code remains 1
 
-        if CORE.target_platform in (PLATFORM_RP2040):
-            return upload_using_platformio(config, host)
-
-        if CORE.is_libretiny:
-            return upload_using_platformio(config, host)
-
-        return 1  # Unknown target platform
+        return exit_code, host if exit_code == 0 else None
 
     ota_conf = {}
     for ota_item in config.get(CONF_OTA, []):
@@ -430,31 +531,23 @@ def upload_program(config: ConfigType, args: ArgsProtocol, host: str) -> int | s
 
     remote_port = int(ota_conf[CONF_PORT])
     password = ota_conf.get(CONF_PASSWORD, "")
+    binary = args.file if getattr(args, "file", None) is not None else CORE.firmware_bin
 
-    # Check if we should use MQTT for address resolution
-    # This happens when no device was specified, or the current host is "MQTT"/"OTA"
-    devices: list[str] = args.device or []
-    if (
-        CONF_MQTT in config  # pylint: disable=too-many-boolean-expressions
-        and (not devices or host in ("MQTT", "OTA"))
-        and (
-            ((config[CONF_MDNS][CONF_DISABLED]) and not is_ip_address(CORE.address))
-            or get_port_type(host) == "MQTT"
-        )
-    ):
-        from esphome import mqtt
+    # MQTT address resolution
+    if get_port_type(host) in ("MQTT", "MQTTIP"):
+        devices = mqtt_get_ip(config, args.username, args.password, args.client_id)
 
-        host = mqtt.get_esphome_device_ip(
-            config, args.username, args.password, args.client_id
-        )
-
-    if getattr(args, "file", None) is not None:
-        return espota2.run_ota(host, remote_port, password, args.file)
-
-    return espota2.run_ota(host, remote_port, password, CORE.firmware_bin)
+    return espota2.run_ota(devices, remote_port, password, binary)
 
 
 def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int | None:
+    try:
+        module = importlib.import_module("esphome.components." + CORE.target_platform)
+        if getattr(module, "show_logs")(config, args, devices):
+            return 0
+    except AttributeError:
+        pass
+
     if "logger" not in config:
         raise EsphomeError("Logger is not configured!")
 
@@ -463,20 +556,28 @@ def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int
     if get_port_type(port) == "SERIAL":
         check_permissions(port)
         return run_miniterm(config, port, args)
-    if get_port_type(port) == "NETWORK" and "api" in config:
-        addresses_to_use = devices
-        if config[CONF_MDNS][CONF_DISABLED] and CONF_MQTT in config:
-            from esphome import mqtt
 
-            mqtt_address = mqtt.get_esphome_device_ip(
+    port_type = get_port_type(port)
+
+    # Check if we should use API for logging
+    if has_api():
+        addresses_to_use: list[str] | None = None
+
+        if port_type == "NETWORK" and (has_mdns() or is_ip_address(port)):
+            addresses_to_use = devices
+        elif port_type in ("NETWORK", "MQTT", "MQTTIP") and has_mqtt_ip_lookup():
+            # Only use MQTT IP lookup if the first condition didn't match
+            # (for MQTT/MQTTIP types, or for NETWORK when mdns/ip check fails)
+            addresses_to_use = mqtt_get_ip(
                 config, args.username, args.password, args.client_id
-            )[0]
-            addresses_to_use = [mqtt_address]
+            )
 
-        from esphome.components.api.client import run_logs
+        if addresses_to_use is not None:
+            from esphome.components.api.client import run_logs
 
-        return run_logs(config, addresses_to_use)
-    if get_port_type(port) == "MQTT" and "mqtt" in config:
+            return run_logs(config, addresses_to_use)
+
+    if port_type in ("NETWORK", "MQTT") and has_mqtt_logging():
         from esphome import mqtt
 
         return mqtt.show_logs(
@@ -542,23 +643,14 @@ def command_upload(args: ArgsProtocol, config: ConfigType) -> int | None:
     devices = choose_upload_log_host(
         default=args.device,
         check_default=None,
-        show_ota=True,
-        show_mqtt=False,
-        show_api=False,
-        purpose="uploading",
+        purpose=Purpose.UPLOADING,
     )
 
-    # Try each device until one succeeds
-    exit_code = 1
-    for device in devices:
-        _LOGGER.info("Uploading to %s", device)
-        exit_code = upload_program(config, args, device)
-        if exit_code == 0:
-            _LOGGER.info("Successfully uploaded program.")
-            return 0
-        if len(devices) > 1:
-            _LOGGER.warning("Failed to upload to %s", device)
-
+    exit_code, _ = upload_program(config, args, devices)
+    if exit_code == 0:
+        _LOGGER.info("Successfully uploaded program.")
+    else:
+        _LOGGER.warning("Failed to upload to %s", devices)
     return exit_code
 
 
@@ -576,10 +668,7 @@ def command_logs(args: ArgsProtocol, config: ConfigType) -> int | None:
     devices = choose_upload_log_host(
         default=args.device,
         check_default=None,
-        show_ota=False,
-        show_mqtt=True,
-        show_api=True,
-        purpose="logging",
+        purpose=Purpose.LOGGING,
     )
     return show_logs(config, args, devices)
 
@@ -605,25 +694,14 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
     devices = choose_upload_log_host(
         default=args.device,
         check_default=None,
-        show_ota=True,
-        show_mqtt=False,
-        show_api=True,
-        purpose="uploading",
+        purpose=Purpose.UPLOADING,
     )
 
-    # Try each device for upload until one succeeds
-    successful_device: str | None = None
-    for device in devices:
-        _LOGGER.info("Uploading to %s", device)
-        exit_code = upload_program(config, args, device)
-        if exit_code == 0:
-            _LOGGER.info("Successfully uploaded program.")
-            successful_device = device
-            break
-        if len(devices) > 1:
-            _LOGGER.warning("Failed to upload to %s", device)
-
-    if successful_device is None:
+    exit_code, successful_device = upload_program(config, args, devices)
+    if exit_code == 0:
+        _LOGGER.info("Successfully uploaded program.")
+    else:
+        _LOGGER.warning("Failed to upload to %s", devices)
         return exit_code
 
     if args.no_logs:
@@ -633,10 +711,7 @@ def command_run(args: ArgsProtocol, config: ConfigType) -> int | None:
     devices = choose_upload_log_host(
         default=successful_device,
         check_default=successful_device,
-        show_ota=False,
-        show_mqtt=True,
-        show_api=True,
-        purpose="logging",
+        purpose=Purpose.LOGGING,
     )
     return show_logs(config, args, devices)
 

esphome/components/absolute_humidity/absolute_humidity.cpp

@@ -61,11 +61,10 @@ void AbsoluteHumidityComponent::loop() {
       ESP_LOGW(TAG, "No valid state from temperature sensor!");
     }
     if (no_humidity) {
-      ESP_LOGW(TAG, "No valid state from temperature sensor!");
+      ESP_LOGW(TAG, "No valid state from humidity sensor!");
     }
-    ESP_LOGW(TAG, "Unable to calculate absolute humidity.");
     this->publish_state(NAN);
-    this->status_set_warning();
+    this->status_set_warning(LOG_STR("Unable to calculate absolute humidity."));
     return;
   }
 
@@ -87,9 +86,8 @@ void AbsoluteHumidityComponent::loop() {
       es = es_wobus(temperature_c);
       break;
     default:
-      ESP_LOGE(TAG, "Invalid saturation vapor pressure equation selection!");
       this->publish_state(NAN);
-      this->status_set_error();
+      this->status_set_error("Invalid saturation vapor pressure equation selection!");
       return;
   }
   ESP_LOGD(TAG, "Saturation vapor pressure %f kPa", es);

esphome/components/absolute_humidity/sensor.py

@@ -5,7 +5,7 @@ from esphome.const import (
     CONF_EQUATION,
     CONF_HUMIDITY,
     CONF_TEMPERATURE,
-    ICON_WATER,
+    DEVICE_CLASS_ABSOLUTE_HUMIDITY,
     STATE_CLASS_MEASUREMENT,
     UNIT_GRAMS_PER_CUBIC_METER,
 )
@@ -27,8 +27,8 @@ EQUATION = {
 CONFIG_SCHEMA = (
     sensor.sensor_schema(
         unit_of_measurement=UNIT_GRAMS_PER_CUBIC_METER,
-        icon=ICON_WATER,
         accuracy_decimals=2,
+        device_class=DEVICE_CLASS_ABSOLUTE_HUMIDITY,
         state_class=STATE_CLASS_MEASUREMENT,
     )
     .extend(

esphome/components/adc/__init__.py

@@ -11,15 +11,8 @@ from esphome.components.esp32.const import (
     VARIANT_ESP32S2,
     VARIANT_ESP32S3,
 )
-from esphome.config_helpers import filter_source_files_from_platform
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_ANALOG,
-    CONF_INPUT,
-    CONF_NUMBER,
-    PLATFORM_ESP8266,
-    PlatformFramework,
-)
+from esphome.const import CONF_ANALOG, CONF_INPUT, CONF_NUMBER, PLATFORM_ESP8266
 from esphome.core import CORE
 
 CODEOWNERS = ["@esphome/core"]
@@ -273,21 +266,3 @@ def validate_adc_pin(value):
         )(value)
 
     raise NotImplementedError
-
-
-FILTER_SOURCE_FILES = filter_source_files_from_platform(
-    {
-        "adc_sensor_esp32.cpp": {
-            PlatformFramework.ESP32_ARDUINO,
-            PlatformFramework.ESP32_IDF,
-        },
-        "adc_sensor_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
-        "adc_sensor_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
-        "adc_sensor_libretiny.cpp": {
-            PlatformFramework.BK72XX_ARDUINO,
-            PlatformFramework.RTL87XX_ARDUINO,
-            PlatformFramework.LN882X_ARDUINO,
-        },
-        "adc_sensor_zephyr.cpp": {PlatformFramework.NRF52_ZEPHYR},
-    }
-)

esphome/components/adc/adc_sensor_esp32.cpp

@@ -241,6 +241,8 @@ float ADCSensor::sample_autorange_() {
     cali_config.bitwidth = ADC_BITWIDTH_DEFAULT;
 
     err = adc_cali_create_scheme_curve_fitting(&cali_config, &handle);
+    ESP_LOGVV(TAG, "Autorange atten=%d: Calibration handle creation %s (err=%d)", atten,
+              (err == ESP_OK) ? "SUCCESS" : "FAILED", err);
 #else
     adc_cali_line_fitting_config_t cali_config = {
       .unit_id = this->adc_unit_,
@@ -251,10 +253,14 @@ float ADCSensor::sample_autorange_() {
 #endif
     };
     err = adc_cali_create_scheme_line_fitting(&cali_config, &handle);
+    ESP_LOGVV(TAG, "Autorange atten=%d: Calibration handle creation %s (err=%d)", atten,
+              (err == ESP_OK) ? "SUCCESS" : "FAILED", err);
 #endif
 
     int raw;
     err = adc_oneshot_read(this->adc_handle_, this->channel_, &raw);
+    ESP_LOGVV(TAG, "Autorange atten=%d: Raw ADC read %s, value=%d (err=%d)", atten,
+              (err == ESP_OK) ? "SUCCESS" : "FAILED", raw, err);
 
     if (err != ESP_OK) {
       ESP_LOGW(TAG, "ADC read failed in autorange with error %d", err);
@@ -275,8 +281,10 @@ float ADCSensor::sample_autorange_() {
       err = adc_cali_raw_to_voltage(handle, raw, &voltage_mv);
       if (err == ESP_OK) {
         voltage = voltage_mv / 1000.0f;
+        ESP_LOGVV(TAG, "Autorange atten=%d: CALIBRATED - raw=%d -> %dmV -> %.6fV", atten, raw, voltage_mv, voltage);
       } else {
         voltage = raw * 3.3f / 4095.0f;
+        ESP_LOGVV(TAG, "Autorange atten=%d: UNCALIBRATED FALLBACK - raw=%d -> %.6fV (3.3V ref)", atten, raw, voltage);
       }
       // Clean up calibration handle
 #if USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32C5 || USE_ESP32_VARIANT_ESP32C6 || \
@@ -287,6 +295,7 @@ float ADCSensor::sample_autorange_() {
 #endif
     } else {
       voltage = raw * 3.3f / 4095.0f;
+      ESP_LOGVV(TAG, "Autorange atten=%d: NO CALIBRATION - raw=%d -> %.6fV (3.3V ref)", atten, raw, voltage);
     }
 
     return {raw, voltage};
@@ -324,18 +333,32 @@ float ADCSensor::sample_autorange_() {
   }
 
   const int adc_half = 2048;
-  uint32_t c12 = std::min(raw12, adc_half);
-  uint32_t c6 = adc_half - std::abs(raw6 - adc_half);
-  uint32_t c2 = adc_half - std::abs(raw2 - adc_half);
-  uint32_t c0 = std::min(4095 - raw0, adc_half);
-  uint32_t csum = c12 + c6 + c2 + c0;
+  const uint32_t c12 = std::min(raw12, adc_half);
+
+  const int32_t c6_signed = adc_half - std::abs(raw6 - adc_half);
+  const uint32_t c6 = (c6_signed > 0) ? c6_signed : 0;  // Clamp to prevent underflow
+
+  const int32_t c2_signed = adc_half - std::abs(raw2 - adc_half);
+  const uint32_t c2 = (c2_signed > 0) ? c2_signed : 0;  // Clamp to prevent underflow
+
+  const uint32_t c0 = std::min(4095 - raw0, adc_half);
+  const uint32_t csum = c12 + c6 + c2 + c0;
+
+  ESP_LOGVV(TAG, "Autorange summary:");
+  ESP_LOGVV(TAG, "  Raw readings: 12db=%d, 6db=%d, 2.5db=%d, 0db=%d", raw12, raw6, raw2, raw0);
+  ESP_LOGVV(TAG, "  Voltages: 12db=%.6f, 6db=%.6f, 2.5db=%.6f, 0db=%.6f", mv12, mv6, mv2, mv0);
+  ESP_LOGVV(TAG, "  Coefficients: c12=%u, c6=%u, c2=%u, c0=%u, sum=%u", c12, c6, c2, c0, csum);
 
   if (csum == 0) {
     ESP_LOGE(TAG, "Invalid weight sum in autorange calculation");
     return NAN;
   }
 
-  return (mv12 * c12 + mv6 * c6 + mv2 * c2 + mv0 * c0) / csum;
+  const float final_result = (mv12 * c12 + mv6 * c6 + mv2 * c2 + mv0 * c0) / csum;
+  ESP_LOGV(TAG, "Autorange final: (%.6f*%u + %.6f*%u + %.6f*%u + %.6f*%u)/%u = %.6fV", mv12, c12, mv6, c6, mv2, c2, mv0,
+           c0, csum, final_result);
+
+  return final_result;
 }
 
 }  // namespace adc

esphome/components/adc/sensor.py

@@ -9,6 +9,7 @@ from esphome.components.zephyr import (
     zephyr_add_prj_conf,
     zephyr_add_user,
 )
+from esphome.config_helpers import filter_source_files_from_platform
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_ATTENUATION,
@@ -20,6 +21,7 @@ from esphome.const import (
     PLATFORM_NRF52,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
+    PlatformFramework,
 )
 from esphome.core import CORE
 
@@ -174,3 +176,21 @@ async def to_code(config):
 }};
 """
         )
+
+
+FILTER_SOURCE_FILES = filter_source_files_from_platform(
+    {
+        "adc_sensor_esp32.cpp": {
+            PlatformFramework.ESP32_ARDUINO,
+            PlatformFramework.ESP32_IDF,
+        },
+        "adc_sensor_esp8266.cpp": {PlatformFramework.ESP8266_ARDUINO},
+        "adc_sensor_rp2040.cpp": {PlatformFramework.RP2040_ARDUINO},
+        "adc_sensor_libretiny.cpp": {
+            PlatformFramework.BK72XX_ARDUINO,
+            PlatformFramework.RTL87XX_ARDUINO,
+            PlatformFramework.LN882X_ARDUINO,
+        },
+        "adc_sensor_zephyr.cpp": {PlatformFramework.NRF52_ZEPHYR},
+    }
+)

esphome/components/ade7880/ade7880.cpp

@@ -113,7 +113,7 @@ void ADE7880::update() {
   if (this->channel_a_ != nullptr) {
     auto *chan = this->channel_a_;
     this->update_sensor_from_s24zp_register16_(chan->current, AIRMS, [](float val) { return val / 100000.0f; });
-    this->update_sensor_from_s24zp_register16_(chan->voltage, BVRMS, [](float val) { return val / 10000.0f; });
+    this->update_sensor_from_s24zp_register16_(chan->voltage, AVRMS, [](float val) { return val / 10000.0f; });
     this->update_sensor_from_s24zp_register16_(chan->active_power, AWATT, [](float val) { return val / 100.0f; });
     this->update_sensor_from_s24zp_register16_(chan->apparent_power, AVA, [](float val) { return val / 100.0f; });
     this->update_sensor_from_s16_register16_(chan->power_factor, APF,

esphome/components/ade7880/sensor.py

@@ -36,6 +36,7 @@ from esphome.const import (
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )
+from esphome.types import ConfigType
 
 DEPENDENCIES = ["i2c"]
 
@@ -51,6 +52,20 @@ CONF_POWER_GAIN = "power_gain"
 
 CONF_NEUTRAL = "neutral"
 
+# Tuple of power channel phases
+POWER_PHASES = (CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C)
+
+# Tuple of sensor types that can be configured for power channels
+POWER_SENSOR_TYPES = (
+    CONF_CURRENT,
+    CONF_VOLTAGE,
+    CONF_ACTIVE_POWER,
+    CONF_APPARENT_POWER,
+    CONF_POWER_FACTOR,
+    CONF_FORWARD_ACTIVE_ENERGY,
+    CONF_REVERSE_ACTIVE_ENERGY,
+)
+
 NEUTRAL_CHANNEL_SCHEMA = cv.Schema(
     {
         cv.GenerateID(): cv.declare_id(NeutralChannel),
@@ -150,7 +165,64 @@ POWER_CHANNEL_SCHEMA = cv.Schema(
     }
 )
 
-CONFIG_SCHEMA = (
+
+def prefix_sensor_name(
+    sensor_conf: ConfigType,
+    channel_name: str,
+    channel_config: ConfigType,
+    sensor_type: str,
+) -> None:
+    """Helper to prefix sensor name with channel name.
+
+    Args:
+        sensor_conf: The sensor configuration (dict or string)
+        channel_name: The channel name to prefix with
+        channel_config: The channel configuration to update
+        sensor_type: The sensor type key in the channel config
+    """
+    if isinstance(sensor_conf, dict) and CONF_NAME in sensor_conf:
+        sensor_name = sensor_conf[CONF_NAME]
+        if sensor_name and not sensor_name.startswith(channel_name):
+            sensor_conf[CONF_NAME] = f"{channel_name} {sensor_name}"
+    elif isinstance(sensor_conf, str):
+        # Simple value case - convert to dict with prefixed name
+        channel_config[sensor_type] = {CONF_NAME: f"{channel_name} {sensor_conf}"}
+
+
+def process_channel_sensors(
+    config: ConfigType, channel_key: str, sensor_types: tuple
+) -> None:
+    """Process sensors for a channel and prefix their names.
+
+    Args:
+        config: The main configuration
+        channel_key: The channel key (e.g., CONF_PHASE_A, CONF_NEUTRAL)
+        sensor_types: Tuple of sensor types to process for this channel
+    """
+    if not (channel_config := config.get(channel_key)) or not (
+        channel_name := channel_config.get(CONF_NAME)
+    ):
+        return
+
+    for sensor_type in sensor_types:
+        if sensor_conf := channel_config.get(sensor_type):
+            prefix_sensor_name(sensor_conf, channel_name, channel_config, sensor_type)
+
+
+def preprocess_channels(config: ConfigType) -> ConfigType:
+    """Preprocess channel configurations to add channel name prefix to sensor names."""
+    # Process power channels
+    for channel in POWER_PHASES:
+        process_channel_sensors(config, channel, POWER_SENSOR_TYPES)
+
+    # Process neutral channel
+    process_channel_sensors(config, CONF_NEUTRAL, (CONF_CURRENT,))
+
+    return config
+
+
+CONFIG_SCHEMA = cv.All(
+    preprocess_channels,
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(ADE7880),
@@ -167,7 +239,7 @@ CONFIG_SCHEMA = (
         }
     )
     .extend(cv.polling_component_schema("60s"))
-    .extend(i2c.i2c_device_schema(0x38))
+    .extend(i2c.i2c_device_schema(0x38)),
 )
 
 
@@ -188,15 +260,7 @@ async def neutral_channel(config):
 async def power_channel(config):
     var = cg.new_Pvariable(config[CONF_ID])
 
-    for sensor_type in [
-        CONF_CURRENT,
-        CONF_VOLTAGE,
-        CONF_ACTIVE_POWER,
-        CONF_APPARENT_POWER,
-        CONF_POWER_FACTOR,
-        CONF_FORWARD_ACTIVE_ENERGY,
-        CONF_REVERSE_ACTIVE_ENERGY,
-    ]:
+    for sensor_type in POWER_SENSOR_TYPES:
         if conf := config.get(sensor_type):
             sens = await sensor.new_sensor(conf)
             cg.add(getattr(var, f"set_{sensor_type}")(sens))
@@ -216,44 +280,6 @@ async def power_channel(config):
     return var
 
 
-def final_validate(config):
-    for channel in [CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C]:
-        if channel := config.get(channel):
-            channel_name = channel.get(CONF_NAME)
-
-            for sensor_type in [
-                CONF_CURRENT,
-                CONF_VOLTAGE,
-                CONF_ACTIVE_POWER,
-                CONF_APPARENT_POWER,
-                CONF_POWER_FACTOR,
-                CONF_FORWARD_ACTIVE_ENERGY,
-                CONF_REVERSE_ACTIVE_ENERGY,
-            ]:
-                if conf := channel.get(sensor_type):
-                    sensor_name = conf.get(CONF_NAME)
-                    if (
-                        sensor_name
-                        and channel_name
-                        and not sensor_name.startswith(channel_name)
-                    ):
-                        conf[CONF_NAME] = f"{channel_name} {sensor_name}"
-
-    if channel := config.get(CONF_NEUTRAL):
-        channel_name = channel.get(CONF_NAME)
-        if conf := channel.get(CONF_CURRENT):
-            sensor_name = conf.get(CONF_NAME)
-            if (
-                sensor_name
-                and channel_name
-                and not sensor_name.startswith(channel_name)
-            ):
-                conf[CONF_NAME] = f"{channel_name} {sensor_name}"
-
-
-FINAL_VALIDATE_SCHEMA = final_validate
-
-
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/ags10/ags10.cpp

@@ -89,7 +89,7 @@ void AGS10Component::dump_config() {
 bool AGS10Component::new_i2c_address(uint8_t newaddress) {
   uint8_t rev_newaddress = ~newaddress;
   std::array<uint8_t, 5> data{newaddress, rev_newaddress, newaddress, rev_newaddress, 0};
-  data[4] = calc_crc8_(data, 4);
+  data[4] = crc8(data.data(), 4, 0xFF, 0x31, true);
   if (!this->write_bytes(REG_ADDRESS, data)) {
     this->error_code_ = COMMUNICATION_FAILED;
     this->status_set_warning();
@@ -109,7 +109,7 @@ bool AGS10Component::set_zero_point_with_current_resistance() { return this->set
 
 bool AGS10Component::set_zero_point_with(uint16_t value) {
   std::array<uint8_t, 5> data{0x00, 0x0C, (uint8_t) ((value >> 8) & 0xFF), (uint8_t) (value & 0xFF), 0};
-  data[4] = calc_crc8_(data, 4);
+  data[4] = crc8(data.data(), 4, 0xFF, 0x31, true);
   if (!this->write_bytes(REG_CALIBRATION, data)) {
     this->error_code_ = COMMUNICATION_FAILED;
     this->status_set_warning();
@@ -184,7 +184,7 @@ template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_che
   auto res = *data;
   auto crc_byte = res[len];
 
-  if (crc_byte != calc_crc8_(res, len)) {
+  if (crc_byte != crc8(res.data(), len, 0xFF, 0x31, true)) {
     this->error_code_ = CRC_CHECK_FAILED;
     ESP_LOGE(TAG, "Reading AGS10 version failed: crc error!");
     return optional<std::array<uint8_t, N>>();
@@ -192,20 +192,5 @@ template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_che
 
   return data;
 }
-
-template<size_t N> uint8_t AGS10Component::calc_crc8_(std::array<uint8_t, N> dat, uint8_t num) {
-  uint8_t i, byte1, crc = 0xFF;
-  for (byte1 = 0; byte1 < num; byte1++) {
-    crc ^= (dat[byte1]);
-    for (i = 0; i < 8; i++) {
-      if (crc & 0x80) {
-        crc = (crc << 1) ^ 0x31;
-      } else {
-        crc = (crc << 1);
-      }
-    }
-  }
-  return crc;
-}
 }  // namespace ags10
 }  // namespace esphome

esphome/components/ags10/ags10.h

@@ -1,9 +1,9 @@
 #pragma once
 
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
 
 namespace esphome {
 namespace ags10 {
@@ -99,16 +99,6 @@ class AGS10Component : public PollingComponent, public i2c::I2CDevice {
    * Read, checks and returns data from the sensor.
    */
   template<size_t N> optional<std::array<uint8_t, N>> read_and_check_(uint8_t a_register);
-
-  /**
-   * Calculates CRC8 value.
-   *
-   * CRC8 calculation, initial value: 0xFF, polynomial: 0x31 (x8+ x5+ x4+1)
-   *
-   * @param[in] dat the data buffer
-   * @param num number of bytes in the buffer
-   */
-  template<size_t N> uint8_t calc_crc8_(std::array<uint8_t, N> dat, uint8_t num);
 };
 
 template<typename... Ts> class AGS10NewI2cAddressAction : public Action<Ts...>, public Parented<AGS10Component> {

esphome/components/aht10/aht10.cpp

@@ -96,7 +96,7 @@ void AHT10Component::read_data_() {
     ESP_LOGD(TAG, "Read attempt %d at %ums", this->read_count_, (unsigned) (millis() - this->start_time_));
   }
   if (this->read(data, 6) != i2c::ERROR_OK) {
-    this->status_set_warning("Read failed, will retry");
+    this->status_set_warning(LOG_STR("Read failed, will retry"));
     this->restart_read_();
     return;
   }
@@ -113,7 +113,7 @@ void AHT10Component::read_data_() {
     } else {
       ESP_LOGD(TAG, "Invalid humidity, retrying");
       if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
-        this->status_set_warning(ESP_LOG_MSG_COMM_FAIL);
+        this->status_set_warning(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
       }
       this->restart_read_();
       return;
@@ -144,7 +144,7 @@ void AHT10Component::update() {
     return;
   this->start_time_ = millis();
   if (this->write(AHT10_MEASURE_CMD, sizeof(AHT10_MEASURE_CMD)) != i2c::ERROR_OK) {
-    this->status_set_warning(ESP_LOG_MSG_COMM_FAIL);
+    this->status_set_warning(LOG_STR(ESP_LOG_MSG_COMM_FAIL));
     return;
   }
   this->restart_read_();

esphome/components/airthings_ble/__init__.py

@@ -18,6 +18,6 @@ CONFIG_SCHEMA = cv.Schema(
 ).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    yield esp32_ble_tracker.register_ble_device(var, config)
+    await esp32_ble_tracker.register_ble_device(var, config)

esphome/components/alarm_control_panel/__init__.py

@@ -13,7 +13,7 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_WEB_SERVER,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -345,6 +345,6 @@ async def alarm_control_panel_is_armed_to_code(
     return cg.new_Pvariable(condition_id, template_arg, paren)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(alarm_control_panel_ns.using)

esphome/components/am2315c/am2315c.cpp

@@ -29,22 +29,6 @@ namespace am2315c {
 
 static const char *const TAG = "am2315c";
 
-uint8_t AM2315C::crc8_(uint8_t *data, uint8_t len) {
-  uint8_t crc = 0xFF;
-  while (len--) {
-    crc ^= *data++;
-    for (uint8_t i = 0; i < 8; i++) {
-      if (crc & 0x80) {
-        crc <<= 1;
-        crc ^= 0x31;
-      } else {
-        crc <<= 1;
-      }
-    }
-  }
-  return crc;
-}
-
 bool AM2315C::reset_register_(uint8_t reg) {
   //  code based on demo code sent by www.aosong.com
   //  no further documentation.
@@ -86,7 +70,7 @@ bool AM2315C::convert_(uint8_t *data, float &humidity, float &temperature) {
   humidity = raw * 9.5367431640625e-5;
   raw = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5];
   temperature = raw * 1.9073486328125e-4 - 50;
-  return this->crc8_(data, 6) == data[6];
+  return crc8(data, 6, 0xFF, 0x31, true) == data[6];
 }
 
 void AM2315C::setup() {

esphome/components/am2315c/am2315c.h

@@ -21,9 +21,9 @@
 // SOFTWARE.
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
 
 namespace esphome {
 namespace am2315c {
@@ -39,7 +39,6 @@ class AM2315C : public PollingComponent, public i2c::I2CDevice {
   void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
 
  protected:
-  uint8_t crc8_(uint8_t *data, uint8_t len);
   bool convert_(uint8_t *data, float &humidity, float &temperature);
   bool reset_register_(uint8_t reg);
 

esphome/components/api/__init__.py

@@ -24,7 +24,7 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_VARIABLES,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 DOMAIN = "api"
 DEPENDENCIES = ["network"]
@@ -134,7 +134,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(40.0)
+@coroutine_with_priority(CoroPriority.WEB)
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
@@ -321,6 +321,7 @@ HOMEASSISTANT_TAG_SCANNED_ACTION_SCHEMA = cv.maybe_simple_value(
     HOMEASSISTANT_TAG_SCANNED_ACTION_SCHEMA,
 )
 async def homeassistant_tag_scanned_to_code(config, action_id, template_arg, args):
+    cg.add_define("USE_API_HOMEASSISTANT_SERVICES")
     serv = await cg.get_variable(config[CONF_ID])
     var = cg.new_Pvariable(action_id, template_arg, serv, True)
     cg.add(var.set_service("esphome.tag_scanned"))

esphome/components/api/api.proto

@@ -27,9 +27,6 @@ service APIConnection {
   rpc subscribe_logs (SubscribeLogsRequest) returns (void) {}
   rpc subscribe_homeassistant_services (SubscribeHomeassistantServicesRequest) returns (void) {}
   rpc subscribe_home_assistant_states (SubscribeHomeAssistantStatesRequest) returns (void) {}
-  rpc get_time (GetTimeRequest) returns (GetTimeResponse) {
-    option (needs_authentication) = false;
-  }
   rpc execute_service (ExecuteServiceRequest) returns (void) {}
   rpc noise_encryption_set_key (NoiseEncryptionSetKeyRequest) returns (NoiseEncryptionSetKeyResponse) {}
 
@@ -809,15 +806,16 @@ message HomeAssistantStateResponse {
 // ==================== IMPORT TIME ====================
 message GetTimeRequest {
   option (id) = 36;
-  option (source) = SOURCE_BOTH;
+  option (source) = SOURCE_SERVER;
 }
 
 message GetTimeResponse {
   option (id) = 37;
-  option (source) = SOURCE_BOTH;
+  option (source) = SOURCE_CLIENT;
   option (no_delay) = true;
 
   fixed32 epoch_seconds = 1;
+  string timezone = 2;
 }
 
 // ==================== USER-DEFINES SERVICES ====================
@@ -1438,11 +1436,11 @@ message BluetoothLERawAdvertisementsResponse {
   option (ifdef) = "USE_BLUETOOTH_PROXY";
   option (no_delay) = true;
 
-  repeated BluetoothLERawAdvertisement advertisements = 1;
+  repeated BluetoothLERawAdvertisement advertisements = 1 [(fixed_array_with_length_define) = "BLUETOOTH_PROXY_ADVERTISEMENT_BATCH_SIZE"];
 }
 
 enum BluetoothDeviceRequestType {
-  BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT = 0;
+  BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT = 0 [deprecated = true]; // V1 removed, use V3 variants
   BLUETOOTH_DEVICE_REQUEST_TYPE_DISCONNECT = 1;
   BLUETOOTH_DEVICE_REQUEST_TYPE_PAIR = 2;
   BLUETOOTH_DEVICE_REQUEST_TYPE_UNPAIR = 3;
@@ -1712,6 +1710,7 @@ message BluetoothScannerStateResponse {
 
   BluetoothScannerState state = 1;
   BluetoothScannerMode mode = 2;
+  BluetoothScannerMode configured_mode = 3;
 }
 
 message BluetoothScannerSetModeRequest {

esphome/components/api/api_connection.cpp

@@ -42,6 +42,8 @@ static constexpr uint8_t MAX_PING_RETRIES = 60;
 static constexpr uint16_t PING_RETRY_INTERVAL = 1000;
 static constexpr uint32_t KEEPALIVE_DISCONNECT_TIMEOUT = (KEEPALIVE_TIMEOUT_MS * 5) / 2;
 
+static constexpr auto ESPHOME_VERSION_REF = StringRef::from_lit(ESPHOME_VERSION);
+
 static const char *const TAG = "api.connection";
 #ifdef USE_CAMERA
 static const int CAMERA_STOP_STREAM = 5000;
@@ -112,7 +114,7 @@ void APIConnection::start() {
   APIError err = this->helper_->init();
   if (err != APIError::OK) {
     on_fatal_error();
-    this->log_warning_("Helper init failed", err);
+    this->log_warning_(LOG_STR("Helper init failed"), err);
     return;
   }
   this->client_info_.peername = helper_->getpeername();
@@ -159,7 +161,7 @@ void APIConnection::loop() {
         break;
       } else if (err != APIError::OK) {
         on_fatal_error();
-        this->log_warning_("Reading failed", err);
+        this->log_warning_(LOG_STR("Reading failed"), err);
         return;
       } else {
         this->last_traffic_ = now;
@@ -289,16 +291,26 @@ uint16_t APIConnection::encode_message_to_buffer(ProtoMessage &msg, uint8_t mess
     return 0;  // Doesn't fit
   }
 
-  // Allocate buffer space - pass payload size, allocation functions add header/footer space
-  ProtoWriteBuffer buffer = is_single ? conn->allocate_single_message_buffer(calculated_size)
-                                      : conn->allocate_batch_message_buffer(calculated_size);
-
   // Get buffer size after allocation (which includes header padding)
   std::vector<uint8_t> &shared_buf = conn->parent_->get_shared_buffer_ref();
-  size_t size_before_encode = shared_buf.size();
+
+  if (is_single || conn->flags_.batch_first_message) {
+    // Single message or first batch message
+    conn->prepare_first_message_buffer(shared_buf, header_padding, total_calculated_size);
+    if (conn->flags_.batch_first_message) {
+      conn->flags_.batch_first_message = false;
+    }
+  } else {
+    // Batch message second or later
+    // Add padding for previous message footer + this message header
+    size_t current_size = shared_buf.size();
+    shared_buf.reserve(current_size + total_calculated_size);
+    shared_buf.resize(current_size + footer_size + header_padding);
+  }
 
   // Encode directly into buffer
-  msg.encode(buffer);
+  size_t size_before_encode = shared_buf.size();
+  msg.encode({&shared_buf});
 
   // Calculate actual encoded size (not including header that was already added)
   size_t actual_payload_size = shared_buf.size() - size_before_encode;
@@ -455,9 +467,7 @@ uint16_t APIConnection::try_send_light_state(EntityBase *entity, APIConnection *
   resp.cold_white = values.get_cold_white();
   resp.warm_white = values.get_warm_white();
   if (light->supports_effects()) {
-    // get_effect_name() returns temporary std::string - must store it
-    std::string effect_name = light->get_effect_name();
-    resp.set_effect(StringRef(effect_name));
+    resp.set_effect(light->get_effect_name_ref());
   }
   return fill_and_encode_entity_state(light, resp, LightStateResponse::MESSAGE_TYPE, conn, remaining_size, is_single);
 }
@@ -1062,17 +1072,17 @@ void APIConnection::camera_image(const CameraImageRequest &msg) {
 
 #ifdef USE_HOMEASSISTANT_TIME
 void APIConnection::on_get_time_response(const GetTimeResponse &value) {
-  if (homeassistant::global_homeassistant_time != nullptr)
+  if (homeassistant::global_homeassistant_time != nullptr) {
     homeassistant::global_homeassistant_time->set_epoch_time(value.epoch_seconds);
+#ifdef USE_TIME_TIMEZONE
+    if (!value.timezone.empty() && value.timezone != homeassistant::global_homeassistant_time->get_timezone()) {
+      homeassistant::global_homeassistant_time->set_timezone(value.timezone);
+    }
+#endif
+  }
 }
 #endif
 
-bool APIConnection::send_get_time_response(const GetTimeRequest &msg) {
-  GetTimeResponse resp;
-  resp.epoch_seconds = ::time(nullptr);
-  return this->send_message(resp, GetTimeResponse::MESSAGE_TYPE);
-}
-
 #ifdef USE_BLUETOOTH_PROXY
 void APIConnection::subscribe_bluetooth_le_advertisements(const SubscribeBluetoothLEAdvertisementsRequest &msg) {
   bluetooth_proxy::global_bluetooth_proxy->subscribe_api_connection(this, msg.flags);
@@ -1362,9 +1372,8 @@ bool APIConnection::send_hello_response(const HelloRequest &msg) {
   HelloResponse resp;
   resp.api_version_major = 1;
   resp.api_version_minor = 12;
-  // Temporary string for concatenation - will be valid during send_message call
-  std::string server_info = App.get_name() + " (esphome v" ESPHOME_VERSION ")";
-  resp.set_server_info(StringRef(server_info));
+  // Send only the version string - the client only logs this for debugging and doesn't use it otherwise
+  resp.set_server_info(ESPHOME_VERSION_REF);
   resp.set_name(StringRef(App.get_name()));
 
 #ifdef USE_API_PASSWORD
@@ -1411,13 +1420,9 @@ bool APIConnection::send_device_info_response(const DeviceInfoRequest &msg) {
   std::string mac_address = get_mac_address_pretty();
   resp.set_mac_address(StringRef(mac_address));
 
-  // Compile-time StringRef constants
-  static constexpr auto ESPHOME_VERSION_REF = StringRef::from_lit(ESPHOME_VERSION);
   resp.set_esphome_version(ESPHOME_VERSION_REF);
 
-  // get_compilation_time() returns temporary std::string - must store it
-  std::string compilation_time = App.get_compilation_time();
-  resp.set_compilation_time(StringRef(compilation_time));
+  resp.set_compilation_time(App.get_compilation_time_ref());
 
   // Compile-time StringRef constants for manufacturers
 #if defined(USE_ESP8266) || defined(USE_ESP32)
@@ -1559,7 +1564,7 @@ bool APIConnection::send_buffer(ProtoWriteBuffer buffer, uint8_t message_type) {
     return false;
   if (err != APIError::OK) {
     on_fatal_error();
-    this->log_warning_("Packet write failed", err);
+    this->log_warning_(LOG_STR("Packet write failed"), err);
     return false;
   }
   // Do not set last_traffic_ on send
@@ -1620,14 +1625,6 @@ bool APIConnection::schedule_batch_() {
   return true;
 }
 
-ProtoWriteBuffer APIConnection::allocate_single_message_buffer(uint16_t size) { return this->create_buffer(size); }
-
-ProtoWriteBuffer APIConnection::allocate_batch_message_buffer(uint16_t size) {
-  ProtoWriteBuffer result = this->prepare_message_buffer(size, this->flags_.batch_first_message);
-  this->flags_.batch_first_message = false;
-  return result;
-}
-
 void APIConnection::process_batch_() {
   // Ensure PacketInfo remains trivially destructible for our placement new approach
   static_assert(std::is_trivially_destructible<PacketInfo>::value,
@@ -1735,7 +1732,7 @@ void APIConnection::process_batch_() {
     }
     remaining_size -= payload_size;
     // Calculate where the next message's header padding will start
-    // Current buffer size + footer space (that prepare_message_buffer will add for this message)
+    // Current buffer size + footer space for this message
     current_offset = shared_buf.size() + footer_size;
   }
 
@@ -1754,7 +1751,7 @@ void APIConnection::process_batch_() {
                                                        std::span<const PacketInfo>(packet_info, packet_count));
   if (err != APIError::OK && err != APIError::WOULD_BLOCK) {
     on_fatal_error();
-    this->log_warning_("Batch write failed", err);
+    this->log_warning_(LOG_STR("Batch write failed"), err);
   }
 
 #ifdef HAS_PROTO_MESSAGE_DUMP
@@ -1832,11 +1829,14 @@ void APIConnection::process_state_subscriptions_() {
 }
 #endif  // USE_API_HOMEASSISTANT_STATES
 
-void APIConnection::log_warning_(const char *message, APIError err) {
-  ESP_LOGW(TAG, "%s: %s %s errno=%d", this->get_client_combined_info().c_str(), message, api_error_to_str(err), errno);
+void APIConnection::log_warning_(const LogString *message, APIError err) {
+  ESP_LOGW(TAG, "%s: %s %s errno=%d", this->get_client_combined_info().c_str(), LOG_STR_ARG(message),
+           LOG_STR_ARG(api_error_to_logstr(err)), errno);
 }
 
-void APIConnection::log_socket_operation_failed_(APIError err) { this->log_warning_("Socket operation failed", err); }
+void APIConnection::log_socket_operation_failed_(APIError err) {
+  this->log_warning_(LOG_STR("Socket operation failed"), err);
+}
 
 }  // namespace esphome::api
 #endif

esphome/components/api/api_connection.h

@@ -44,7 +44,7 @@ static constexpr size_t MAX_PACKETS_PER_BATCH = 64;  // ESP32 has 8KB+ stack, HO
 static constexpr size_t MAX_PACKETS_PER_BATCH = 32;  // ESP8266/RP2040/etc have smaller stacks
 #endif
 
-class APIConnection : public APIServerConnection {
+class APIConnection final : public APIServerConnection {
  public:
   friend class APIServer;
   friend class ListEntitiesIterator;
@@ -219,7 +219,6 @@ class APIConnection : public APIServerConnection {
 #ifdef USE_API_HOMEASSISTANT_STATES
   void subscribe_home_assistant_states(const SubscribeHomeAssistantStatesRequest &msg) override;
 #endif
-  bool send_get_time_response(const GetTimeRequest &msg) override;
 #ifdef USE_API_SERVICES
   void execute_service(const ExecuteServiceRequest &msg) override;
 #endif
@@ -252,44 +251,21 @@ class APIConnection : public APIServerConnection {
 
     // Get header padding size - used for both reserve and insert
     uint8_t header_padding = this->helper_->frame_header_padding();
-
     // Get shared buffer from parent server
     std::vector<uint8_t> &shared_buf = this->parent_->get_shared_buffer_ref();
+    this->prepare_first_message_buffer(shared_buf, header_padding,
+                                       reserve_size + header_padding + this->helper_->frame_footer_size());
+    return {&shared_buf};
+  }
+
+  void prepare_first_message_buffer(std::vector<uint8_t> &shared_buf, size_t header_padding, size_t total_size) {
     shared_buf.clear();
     // Reserve space for header padding + message + footer
     // - Header padding: space for protocol headers (7 bytes for Noise, 6 for Plaintext)
     // - Footer: space for MAC (16 bytes for Noise, 0 for Plaintext)
-    shared_buf.reserve(reserve_size + header_padding + this->helper_->frame_footer_size());
+    shared_buf.reserve(total_size);
     // Resize to add header padding so message encoding starts at the correct position
     shared_buf.resize(header_padding);
-    return {&shared_buf};
-  }
-
-  // Prepare buffer for next message in batch
-  ProtoWriteBuffer prepare_message_buffer(uint16_t message_size, bool is_first_message) {
-    // Get reference to shared buffer (it maintains state between batch messages)
-    std::vector<uint8_t> &shared_buf = this->parent_->get_shared_buffer_ref();
-
-    if (is_first_message) {
-      shared_buf.clear();
-    }
-
-    size_t current_size = shared_buf.size();
-
-    // Calculate padding to add:
-    // - First message: just header padding
-    // - Subsequent messages: footer for previous message + header padding for this message
-    size_t padding_to_add = is_first_message
-                                ? this->helper_->frame_header_padding()
-                                : this->helper_->frame_header_padding() + this->helper_->frame_footer_size();
-
-    // Reserve space for padding + message
-    shared_buf.reserve(current_size + padding_to_add + message_size);
-
-    // Resize to add the padding bytes
-    shared_buf.resize(current_size + padding_to_add);
-
-    return {&shared_buf};
   }
 
   bool try_to_clear_buffer(bool log_out_of_space);
@@ -297,10 +273,6 @@ class APIConnection : public APIServerConnection {
 
   std::string get_client_combined_info() const { return this->client_info_.get_combined_info(); }
 
-  // Buffer allocator methods for batch processing
-  ProtoWriteBuffer allocate_single_message_buffer(uint16_t size);
-  ProtoWriteBuffer allocate_batch_message_buffer(uint16_t size);
-
  protected:
   // Helper function to handle authentication completion
   void complete_authentication_();
@@ -328,9 +300,17 @@ class APIConnection : public APIServerConnection {
                                               APIConnection *conn, uint32_t remaining_size, bool is_single) {
     // Set common fields that are shared by all entity types
     msg.key = entity->get_object_id_hash();
-    // IMPORTANT: get_object_id() may return a temporary std::string
-    std::string object_id = entity->get_object_id();
-    msg.set_object_id(StringRef(object_id));
+    // Try to use static reference first to avoid allocation
+    StringRef static_ref = entity->get_object_id_ref_for_api_();
+    // Store dynamic string outside the if-else to maintain lifetime
+    std::string object_id;
+    if (!static_ref.empty()) {
+      msg.set_object_id(static_ref);
+    } else {
+      // Dynamic case - need to allocate
+      object_id = entity->get_object_id();
+      msg.set_object_id(StringRef(object_id));
+    }
 
     if (entity->has_own_name()) {
       msg.set_name(entity->get_name());
@@ -751,7 +731,7 @@ class APIConnection : public APIServerConnection {
   }
 
   // Helper function to log API errors with errno
-  void log_warning_(const char *message, APIError err);
+  void log_warning_(const LogString *message, APIError err);
   // Specific helper for duplicated error message
   void log_socket_operation_failed_(APIError err);
 };

esphome/components/api/api_frame_helper.cpp

@@ -23,59 +23,59 @@ static const char *const TAG = "api.frame_helper";
 #define LOG_PACKET_SENDING(data, len) ((void) 0)
 #endif
 
-const char *api_error_to_str(APIError err) {
+const LogString *api_error_to_logstr(APIError err) {
   // not using switch to ensure compiler doesn't try to build a big table out of it
   if (err == APIError::OK) {
-    return "OK";
+    return LOG_STR("OK");
   } else if (err == APIError::WOULD_BLOCK) {
-    return "WOULD_BLOCK";
+    return LOG_STR("WOULD_BLOCK");
   } else if (err == APIError::BAD_INDICATOR) {
-    return "BAD_INDICATOR";
+    return LOG_STR("BAD_INDICATOR");
   } else if (err == APIError::BAD_DATA_PACKET) {
-    return "BAD_DATA_PACKET";
+    return LOG_STR("BAD_DATA_PACKET");
   } else if (err == APIError::TCP_NODELAY_FAILED) {
-    return "TCP_NODELAY_FAILED";
+    return LOG_STR("TCP_NODELAY_FAILED");
   } else if (err == APIError::TCP_NONBLOCKING_FAILED) {
-    return "TCP_NONBLOCKING_FAILED";
+    return LOG_STR("TCP_NONBLOCKING_FAILED");
   } else if (err == APIError::CLOSE_FAILED) {
-    return "CLOSE_FAILED";
+    return LOG_STR("CLOSE_FAILED");
   } else if (err == APIError::SHUTDOWN_FAILED) {
-    return "SHUTDOWN_FAILED";
+    return LOG_STR("SHUTDOWN_FAILED");
   } else if (err == APIError::BAD_STATE) {
-    return "BAD_STATE";
+    return LOG_STR("BAD_STATE");
   } else if (err == APIError::BAD_ARG) {
-    return "BAD_ARG";
+    return LOG_STR("BAD_ARG");
   } else if (err == APIError::SOCKET_READ_FAILED) {
-    return "SOCKET_READ_FAILED";
+    return LOG_STR("SOCKET_READ_FAILED");
   } else if (err == APIError::SOCKET_WRITE_FAILED) {
-    return "SOCKET_WRITE_FAILED";
+    return LOG_STR("SOCKET_WRITE_FAILED");
   } else if (err == APIError::OUT_OF_MEMORY) {
-    return "OUT_OF_MEMORY";
+    return LOG_STR("OUT_OF_MEMORY");
   } else if (err == APIError::CONNECTION_CLOSED) {
-    return "CONNECTION_CLOSED";
+    return LOG_STR("CONNECTION_CLOSED");
   }
 #ifdef USE_API_NOISE
   else if (err == APIError::BAD_HANDSHAKE_PACKET_LEN) {
-    return "BAD_HANDSHAKE_PACKET_LEN";
+    return LOG_STR("BAD_HANDSHAKE_PACKET_LEN");
   } else if (err == APIError::HANDSHAKESTATE_READ_FAILED) {
-    return "HANDSHAKESTATE_READ_FAILED";
+    return LOG_STR("HANDSHAKESTATE_READ_FAILED");
   } else if (err == APIError::HANDSHAKESTATE_WRITE_FAILED) {
-    return "HANDSHAKESTATE_WRITE_FAILED";
+    return LOG_STR("HANDSHAKESTATE_WRITE_FAILED");
   } else if (err == APIError::HANDSHAKESTATE_BAD_STATE) {
-    return "HANDSHAKESTATE_BAD_STATE";
+    return LOG_STR("HANDSHAKESTATE_BAD_STATE");
   } else if (err == APIError::CIPHERSTATE_DECRYPT_FAILED) {
-    return "CIPHERSTATE_DECRYPT_FAILED";
+    return LOG_STR("CIPHERSTATE_DECRYPT_FAILED");
   } else if (err == APIError::CIPHERSTATE_ENCRYPT_FAILED) {
-    return "CIPHERSTATE_ENCRYPT_FAILED";
+    return LOG_STR("CIPHERSTATE_ENCRYPT_FAILED");
   } else if (err == APIError::HANDSHAKESTATE_SETUP_FAILED) {
-    return "HANDSHAKESTATE_SETUP_FAILED";
+    return LOG_STR("HANDSHAKESTATE_SETUP_FAILED");
   } else if (err == APIError::HANDSHAKESTATE_SPLIT_FAILED) {
-    return "HANDSHAKESTATE_SPLIT_FAILED";
+    return LOG_STR("HANDSHAKESTATE_SPLIT_FAILED");
   } else if (err == APIError::BAD_HANDSHAKE_ERROR_BYTE) {
-    return "BAD_HANDSHAKE_ERROR_BYTE";
+    return LOG_STR("BAD_HANDSHAKE_ERROR_BYTE");
   }
 #endif
-  return "UNKNOWN";
+  return LOG_STR("UNKNOWN");
 }
 
 // Default implementation for loop - handles sending buffered data
@@ -156,7 +156,9 @@ APIError APIFrameHelper::write_raw_(const struct iovec *iov, int iovcnt, uint16_
   }
 
   // Try to send directly if no buffered data
-  ssize_t sent = this->socket_->writev(iov, iovcnt);
+  // Optimize for single iovec case (common for plaintext API)
+  ssize_t sent =
+      (iovcnt == 1) ? this->socket_->write(iov[0].iov_base, iov[0].iov_len) : this->socket_->writev(iov, iovcnt);
 
   if (sent == -1) {
     APIError err = this->handle_socket_write_error_();

esphome/components/api/api_frame_helper.h

@@ -66,7 +66,7 @@ enum class APIError : uint16_t {
 #endif
 };
 
-const char *api_error_to_str(APIError err);
+const LogString *api_error_to_logstr(APIError err);
 
 class APIFrameHelper {
  public:
@@ -104,9 +104,9 @@ class APIFrameHelper {
   // The buffer contains all messages with appropriate padding before each
   virtual APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) = 0;
   // Get the frame header padding required by this protocol
-  virtual uint8_t frame_header_padding() = 0;
+  uint8_t frame_header_padding() const { return frame_header_padding_; }
   // Get the frame footer size required by this protocol
-  virtual uint8_t frame_footer_size() = 0;
+  uint8_t frame_footer_size() const { return frame_footer_size_; }
   // Check if socket has data ready to read
   bool is_socket_ready() const { return socket_ != nullptr && socket_->ready(); }
 

esphome/components/api/api_frame_helper_noise.cpp

@@ -10,10 +10,18 @@
 #include <cstring>
 #include <cinttypes>
 
+#ifdef USE_ESP8266
+#include <pgmspace.h>
+#endif
+
 namespace esphome::api {
 
 static const char *const TAG = "api.noise";
+#ifdef USE_ESP8266
+static const char PROLOGUE_INIT[] PROGMEM = "NoiseAPIInit";
+#else
 static const char *const PROLOGUE_INIT = "NoiseAPIInit";
+#endif
 static constexpr size_t PROLOGUE_INIT_LEN = 12;  // strlen("NoiseAPIInit")
 
 #define HELPER_LOG(msg, ...) ESP_LOGVV(TAG, "%s: " msg, this->client_info_->get_combined_info().c_str(), ##__VA_ARGS__)
@@ -27,42 +35,42 @@ static constexpr size_t PROLOGUE_INIT_LEN = 12;  // strlen("NoiseAPIInit")
 #endif
 
 /// Convert a noise error code to a readable error
-std::string noise_err_to_str(int err) {
+const LogString *noise_err_to_logstr(int err) {
   if (err == NOISE_ERROR_NO_MEMORY)
-    return "NO_MEMORY";
+    return LOG_STR("NO_MEMORY");
   if (err == NOISE_ERROR_UNKNOWN_ID)
-    return "UNKNOWN_ID";
+    return LOG_STR("UNKNOWN_ID");
   if (err == NOISE_ERROR_UNKNOWN_NAME)
-    return "UNKNOWN_NAME";
+    return LOG_STR("UNKNOWN_NAME");
   if (err == NOISE_ERROR_MAC_FAILURE)
-    return "MAC_FAILURE";
+    return LOG_STR("MAC_FAILURE");
   if (err == NOISE_ERROR_NOT_APPLICABLE)
-    return "NOT_APPLICABLE";
+    return LOG_STR("NOT_APPLICABLE");
   if (err == NOISE_ERROR_SYSTEM)
-    return "SYSTEM";
+    return LOG_STR("SYSTEM");
   if (err == NOISE_ERROR_REMOTE_KEY_REQUIRED)
-    return "REMOTE_KEY_REQUIRED";
+    return LOG_STR("REMOTE_KEY_REQUIRED");
   if (err == NOISE_ERROR_LOCAL_KEY_REQUIRED)
-    return "LOCAL_KEY_REQUIRED";
+    return LOG_STR("LOCAL_KEY_REQUIRED");
   if (err == NOISE_ERROR_PSK_REQUIRED)
-    return "PSK_REQUIRED";
+    return LOG_STR("PSK_REQUIRED");
   if (err == NOISE_ERROR_INVALID_LENGTH)
-    return "INVALID_LENGTH";
+    return LOG_STR("INVALID_LENGTH");
   if (err == NOISE_ERROR_INVALID_PARAM)
-    return "INVALID_PARAM";
+    return LOG_STR("INVALID_PARAM");
   if (err == NOISE_ERROR_INVALID_STATE)
-    return "INVALID_STATE";
+    return LOG_STR("INVALID_STATE");
   if (err == NOISE_ERROR_INVALID_NONCE)
-    return "INVALID_NONCE";
+    return LOG_STR("INVALID_NONCE");
   if (err == NOISE_ERROR_INVALID_PRIVATE_KEY)
-    return "INVALID_PRIVATE_KEY";
+    return LOG_STR("INVALID_PRIVATE_KEY");
   if (err == NOISE_ERROR_INVALID_PUBLIC_KEY)
-    return "INVALID_PUBLIC_KEY";
+    return LOG_STR("INVALID_PUBLIC_KEY");
   if (err == NOISE_ERROR_INVALID_FORMAT)
-    return "INVALID_FORMAT";
+    return LOG_STR("INVALID_FORMAT");
   if (err == NOISE_ERROR_INVALID_SIGNATURE)
-    return "INVALID_SIGNATURE";
-  return to_string(err);
+    return LOG_STR("INVALID_SIGNATURE");
+  return LOG_STR("UNKNOWN");
 }
 
 /// Initialize the frame helper, returns OK if successful.
@@ -75,7 +83,11 @@ APIError APINoiseFrameHelper::init() {
   // init prologue
   size_t old_size = prologue_.size();
   prologue_.resize(old_size + PROLOGUE_INIT_LEN);
+#ifdef USE_ESP8266
+  memcpy_P(prologue_.data() + old_size, PROLOGUE_INIT, PROLOGUE_INIT_LEN);
+#else
   std::memcpy(prologue_.data() + old_size, PROLOGUE_INIT, PROLOGUE_INIT_LEN);
+#endif
 
   state_ = State::CLIENT_HELLO;
   return APIError::OK;
@@ -83,18 +95,18 @@ APIError APINoiseFrameHelper::init() {
 // Helper for handling handshake frame errors
 APIError APINoiseFrameHelper::handle_handshake_frame_error_(APIError aerr) {
   if (aerr == APIError::BAD_INDICATOR) {
-    send_explicit_handshake_reject_("Bad indicator byte");
+    send_explicit_handshake_reject_(LOG_STR("Bad indicator byte"));
   } else if (aerr == APIError::BAD_HANDSHAKE_PACKET_LEN) {
-    send_explicit_handshake_reject_("Bad handshake packet len");
+    send_explicit_handshake_reject_(LOG_STR("Bad handshake packet len"));
   }
   return aerr;
 }
 
 // Helper for handling noise library errors
-APIError APINoiseFrameHelper::handle_noise_error_(int err, const char *func_name, APIError api_err) {
+APIError APINoiseFrameHelper::handle_noise_error_(int err, const LogString *func_name, APIError api_err) {
   if (err != 0) {
     state_ = State::FAILED;
-    HELPER_LOG("%s failed: %s", func_name, noise_err_to_str(err).c_str());
+    HELPER_LOG("%s failed: %s", LOG_STR_ARG(func_name), LOG_STR_ARG(noise_err_to_logstr(err)));
     return api_err;
   }
   return APIError::OK;
@@ -279,11 +291,11 @@ APIError APINoiseFrameHelper::state_action_() {
       }
 
       if (frame.empty()) {
-        send_explicit_handshake_reject_("Empty handshake message");
+        send_explicit_handshake_reject_(LOG_STR("Empty handshake message"));
         return APIError::BAD_HANDSHAKE_ERROR_BYTE;
       } else if (frame[0] != 0x00) {
         HELPER_LOG("Bad handshake error byte: %u", frame[0]);
-        send_explicit_handshake_reject_("Bad handshake error byte");
+        send_explicit_handshake_reject_(LOG_STR("Bad handshake error byte"));
         return APIError::BAD_HANDSHAKE_ERROR_BYTE;
       }
 
@@ -293,8 +305,10 @@ APIError APINoiseFrameHelper::state_action_() {
       err = noise_handshakestate_read_message(handshake_, &mbuf, nullptr);
       if (err != 0) {
         // Special handling for MAC failure
-        send_explicit_handshake_reject_(err == NOISE_ERROR_MAC_FAILURE ? "Handshake MAC failure" : "Handshake error");
-        return handle_noise_error_(err, "noise_handshakestate_read_message", APIError::HANDSHAKESTATE_READ_FAILED);
+        send_explicit_handshake_reject_(err == NOISE_ERROR_MAC_FAILURE ? LOG_STR("Handshake MAC failure")
+                                                                       : LOG_STR("Handshake error"));
+        return handle_noise_error_(err, LOG_STR("noise_handshakestate_read_message"),
+                                   APIError::HANDSHAKESTATE_READ_FAILED);
       }
 
       aerr = check_handshake_finished_();
@@ -307,8 +321,8 @@ APIError APINoiseFrameHelper::state_action_() {
       noise_buffer_set_output(mbuf, buffer + 1, sizeof(buffer) - 1);
 
       err = noise_handshakestate_write_message(handshake_, &mbuf, nullptr);
-      APIError aerr_write =
-          handle_noise_error_(err, "noise_handshakestate_write_message", APIError::HANDSHAKESTATE_WRITE_FAILED);
+      APIError aerr_write = handle_noise_error_(err, LOG_STR("noise_handshakestate_write_message"),
+                                                APIError::HANDSHAKESTATE_WRITE_FAILED);
       if (aerr_write != APIError::OK)
         return aerr_write;
       buffer[0] = 0x00;  // success
@@ -331,15 +345,31 @@ APIError APINoiseFrameHelper::state_action_() {
   }
   return APIError::OK;
 }
-void APINoiseFrameHelper::send_explicit_handshake_reject_(const std::string &reason) {
+void APINoiseFrameHelper::send_explicit_handshake_reject_(const LogString *reason) {
+#ifdef USE_STORE_LOG_STR_IN_FLASH
+  // On ESP8266 with flash strings, we need to use PROGMEM-aware functions
+  size_t reason_len = strlen_P(reinterpret_cast<PGM_P>(reason));
   std::vector<uint8_t> data;
-  data.resize(reason.length() + 1);
+  data.resize(reason_len + 1);
+  data[0] = 0x01;  // failure
+
+  // Copy error message from PROGMEM
+  if (reason_len > 0) {
+    memcpy_P(data.data() + 1, reinterpret_cast<PGM_P>(reason), reason_len);
+  }
+#else
+  // Normal memory access
+  const char *reason_str = LOG_STR_ARG(reason);
+  size_t reason_len = strlen(reason_str);
+  std::vector<uint8_t> data;
+  data.resize(reason_len + 1);
   data[0] = 0x01;  // failure
 
   // Copy error message in bulk
-  if (!reason.empty()) {
-    std::memcpy(data.data() + 1, reason.c_str(), reason.length());
+  if (reason_len > 0) {
+    std::memcpy(data.data() + 1, reason_str, reason_len);
   }
+#endif
 
   // temporarily remove failed state
   auto orig_state = state_;
@@ -368,7 +398,8 @@ APIError APINoiseFrameHelper::read_packet(ReadPacketBuffer *buffer) {
   noise_buffer_init(mbuf);
   noise_buffer_set_inout(mbuf, frame.data(), frame.size(), frame.size());
   err = noise_cipherstate_decrypt(recv_cipher_, &mbuf);
-  APIError decrypt_err = handle_noise_error_(err, "noise_cipherstate_decrypt", APIError::CIPHERSTATE_DECRYPT_FAILED);
+  APIError decrypt_err =
+      handle_noise_error_(err, LOG_STR("noise_cipherstate_decrypt"), APIError::CIPHERSTATE_DECRYPT_FAILED);
   if (decrypt_err != APIError::OK)
     return decrypt_err;
 
@@ -450,7 +481,8 @@ APIError APINoiseFrameHelper::write_protobuf_packets(ProtoWriteBuffer buffer, st
                            4 + packet.payload_size + frame_footer_size_);
 
     int err = noise_cipherstate_encrypt(send_cipher_, &mbuf);
-    APIError aerr = handle_noise_error_(err, "noise_cipherstate_encrypt", APIError::CIPHERSTATE_ENCRYPT_FAILED);
+    APIError aerr =
+        handle_noise_error_(err, LOG_STR("noise_cipherstate_encrypt"), APIError::CIPHERSTATE_ENCRYPT_FAILED);
     if (aerr != APIError::OK)
       return aerr;
 
@@ -504,25 +536,27 @@ APIError APINoiseFrameHelper::init_handshake_() {
   nid_.modifier_ids[0] = NOISE_MODIFIER_PSK0;
 
   err = noise_handshakestate_new_by_id(&handshake_, &nid_, NOISE_ROLE_RESPONDER);
-  APIError aerr = handle_noise_error_(err, "noise_handshakestate_new_by_id", APIError::HANDSHAKESTATE_SETUP_FAILED);
+  APIError aerr =
+      handle_noise_error_(err, LOG_STR("noise_handshakestate_new_by_id"), APIError::HANDSHAKESTATE_SETUP_FAILED);
   if (aerr != APIError::OK)
     return aerr;
 
   const auto &psk = ctx_->get_psk();
   err = noise_handshakestate_set_pre_shared_key(handshake_, psk.data(), psk.size());
-  aerr = handle_noise_error_(err, "noise_handshakestate_set_pre_shared_key", APIError::HANDSHAKESTATE_SETUP_FAILED);
+  aerr = handle_noise_error_(err, LOG_STR("noise_handshakestate_set_pre_shared_key"),
+                             APIError::HANDSHAKESTATE_SETUP_FAILED);
   if (aerr != APIError::OK)
     return aerr;
 
   err = noise_handshakestate_set_prologue(handshake_, prologue_.data(), prologue_.size());
-  aerr = handle_noise_error_(err, "noise_handshakestate_set_prologue", APIError::HANDSHAKESTATE_SETUP_FAILED);
+  aerr = handle_noise_error_(err, LOG_STR("noise_handshakestate_set_prologue"), APIError::HANDSHAKESTATE_SETUP_FAILED);
   if (aerr != APIError::OK)
     return aerr;
   // set_prologue copies it into handshakestate, so we can get rid of it now
   prologue_ = {};
 
   err = noise_handshakestate_start(handshake_);
-  aerr = handle_noise_error_(err, "noise_handshakestate_start", APIError::HANDSHAKESTATE_SETUP_FAILED);
+  aerr = handle_noise_error_(err, LOG_STR("noise_handshakestate_start"), APIError::HANDSHAKESTATE_SETUP_FAILED);
   if (aerr != APIError::OK)
     return aerr;
   return APIError::OK;
@@ -540,7 +574,8 @@ APIError APINoiseFrameHelper::check_handshake_finished_() {
     return APIError::HANDSHAKESTATE_BAD_STATE;
   }
   int err = noise_handshakestate_split(handshake_, &send_cipher_, &recv_cipher_);
-  APIError aerr = handle_noise_error_(err, "noise_handshakestate_split", APIError::HANDSHAKESTATE_SPLIT_FAILED);
+  APIError aerr =
+      handle_noise_error_(err, LOG_STR("noise_handshakestate_split"), APIError::HANDSHAKESTATE_SPLIT_FAILED);
   if (aerr != APIError::OK)
     return aerr;
 

esphome/components/api/api_frame_helper_noise.h

@@ -7,7 +7,7 @@
 
 namespace esphome::api {
 
-class APINoiseFrameHelper : public APIFrameHelper {
+class APINoiseFrameHelper final : public APIFrameHelper {
  public:
   APINoiseFrameHelper(std::unique_ptr<socket::Socket> socket, std::shared_ptr<APINoiseContext> ctx,
                       const ClientInfo *client_info)
@@ -25,10 +25,6 @@ class APINoiseFrameHelper : public APIFrameHelper {
   APIError read_packet(ReadPacketBuffer *buffer) override;
   APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) override;
-  // Get the frame header padding required by this protocol
-  uint8_t frame_header_padding() override { return frame_header_padding_; }
-  // Get the frame footer size required by this protocol
-  uint8_t frame_footer_size() override { return frame_footer_size_; }
 
  protected:
   APIError state_action_();
@@ -36,9 +32,9 @@ class APINoiseFrameHelper : public APIFrameHelper {
   APIError write_frame_(const uint8_t *data, uint16_t len);
   APIError init_handshake_();
   APIError check_handshake_finished_();
-  void send_explicit_handshake_reject_(const std::string &reason);
+  void send_explicit_handshake_reject_(const LogString *reason);
   APIError handle_handshake_frame_error_(APIError aerr);
-  APIError handle_noise_error_(int err, const char *func_name, APIError api_err);
+  APIError handle_noise_error_(int err, const LogString *func_name, APIError api_err);
 
   // Pointers first (4 bytes each)
   NoiseHandshakeState *handshake_{nullptr};

esphome/components/api/api_frame_helper_plaintext.cpp

@@ -10,6 +10,10 @@
 #include <cstring>
 #include <cinttypes>
 
+#ifdef USE_ESP8266
+#include <pgmspace.h>
+#endif
+
 namespace esphome::api {
 
 static const char *const TAG = "api.plaintext";
@@ -197,11 +201,20 @@ APIError APIPlaintextFrameHelper::read_packet(ReadPacketBuffer *buffer) {
       // We must send at least 3 bytes to be read, so we add
       // a message after the indicator byte to ensures its long
       // enough and can aid in debugging.
-      const char msg[] = "\x00"
-                         "Bad indicator byte";
+      static constexpr uint8_t INDICATOR_MSG_SIZE = 19;
+#ifdef USE_ESP8266
+      static const char MSG_PROGMEM[] PROGMEM = "\x00"
+                                                "Bad indicator byte";
+      char msg[INDICATOR_MSG_SIZE];
+      memcpy_P(msg, MSG_PROGMEM, INDICATOR_MSG_SIZE);
       iov[0].iov_base = (void *) msg;
-      iov[0].iov_len = 19;
-      this->write_raw_(iov, 1, 19);
+#else
+      static const char MSG[] = "\x00"
+                                "Bad indicator byte";
+      iov[0].iov_base = (void *) MSG;
+#endif
+      iov[0].iov_len = INDICATOR_MSG_SIZE;
+      this->write_raw_(iov, 1, INDICATOR_MSG_SIZE);
     }
     return aerr;
   }

esphome/components/api/api_frame_helper_plaintext.h

@@ -5,7 +5,7 @@
 
 namespace esphome::api {
 
-class APIPlaintextFrameHelper : public APIFrameHelper {
+class APIPlaintextFrameHelper final : public APIFrameHelper {
  public:
   APIPlaintextFrameHelper(std::unique_ptr<socket::Socket> socket, const ClientInfo *client_info)
       : APIFrameHelper(std::move(socket), client_info) {
@@ -22,9 +22,6 @@ class APIPlaintextFrameHelper : public APIFrameHelper {
   APIError read_packet(ReadPacketBuffer *buffer) override;
   APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) override;
-  uint8_t frame_header_padding() override { return frame_header_padding_; }
-  // Get the frame footer size required by this protocol
-  uint8_t frame_footer_size() override { return frame_footer_size_; }
 
  protected:
   APIError try_read_frame_(std::vector<uint8_t> *frame);

esphome/components/api/api_options.proto

@@ -30,6 +30,7 @@ extend google.protobuf.FieldOptions {
     optional bool no_zero_copy = 50008 [default=false];
     optional bool fixed_array_skip_zero = 50009 [default=false];
     optional string fixed_array_size_define = 50010;
+    optional string fixed_array_with_length_define = 50011;
 
     // container_pointer: Zero-copy optimization for repeated fields.
     //

esphome/components/api/api_pb2.cpp

@@ -901,6 +901,16 @@ bool HomeAssistantStateResponse::decode_length(uint32_t field_id, ProtoLengthDel
   return true;
 }
 #endif
+bool GetTimeResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
+  switch (field_id) {
+    case 2:
+      this->timezone = value.as_string();
+      break;
+    default:
+      return false;
+  }
+  return true;
+}
 bool GetTimeResponse::decode_32bit(uint32_t field_id, Proto32Bit value) {
   switch (field_id) {
     case 1:
@@ -911,8 +921,6 @@ bool GetTimeResponse::decode_32bit(uint32_t field_id, Proto32Bit value) {
   }
   return true;
 }
-void GetTimeResponse::encode(ProtoWriteBuffer buffer) const { buffer.encode_fixed32(1, this->epoch_seconds); }
-void GetTimeResponse::calculate_size(ProtoSize &size) const { size.add_fixed32(1, this->epoch_seconds); }
 #ifdef USE_API_SERVICES
 void ListEntitiesServicesArgument::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_string(1, this->name_ref_);
@@ -1843,12 +1851,14 @@ void BluetoothLERawAdvertisement::calculate_size(ProtoSize &size) const {
   size.add_length(1, this->data_len);
 }
 void BluetoothLERawAdvertisementsResponse::encode(ProtoWriteBuffer buffer) const {
-  for (auto &it : this->advertisements) {
-    buffer.encode_message(1, it, true);
+  for (uint16_t i = 0; i < this->advertisements_len; i++) {
+    buffer.encode_message(1, this->advertisements[i], true);
   }
 }
 void BluetoothLERawAdvertisementsResponse::calculate_size(ProtoSize &size) const {
-  size.add_repeated_message(1, this->advertisements);
+  for (uint16_t i = 0; i < this->advertisements_len; i++) {
+    size.add_message_object_force(1, this->advertisements[i]);
+  }
 }
 bool BluetoothDeviceRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
@@ -2151,10 +2161,12 @@ void BluetoothDeviceClearCacheResponse::calculate_size(ProtoSize &size) const {
 void BluetoothScannerStateResponse::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_uint32(1, static_cast<uint32_t>(this->state));
   buffer.encode_uint32(2, static_cast<uint32_t>(this->mode));
+  buffer.encode_uint32(3, static_cast<uint32_t>(this->configured_mode));
 }
 void BluetoothScannerStateResponse::calculate_size(ProtoSize &size) const {
   size.add_uint32(1, static_cast<uint32_t>(this->state));
   size.add_uint32(1, static_cast<uint32_t>(this->mode));
+  size.add_uint32(1, static_cast<uint32_t>(this->configured_mode));
 }
 bool BluetoothScannerSetModeRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {

esphome/components/api/api_pb2_dump.cpp

@@ -1110,7 +1110,11 @@ void HomeAssistantStateResponse::dump_to(std::string &out) const {
 }
 #endif
 void GetTimeRequest::dump_to(std::string &out) const { out.append("GetTimeRequest {}"); }
-void GetTimeResponse::dump_to(std::string &out) const { dump_field(out, "epoch_seconds", this->epoch_seconds); }
+void GetTimeResponse::dump_to(std::string &out) const {
+  MessageDumpHelper helper(out, "GetTimeResponse");
+  dump_field(out, "epoch_seconds", this->epoch_seconds);
+  dump_field(out, "timezone", this->timezone);
+}
 #ifdef USE_API_SERVICES
 void ListEntitiesServicesArgument::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "ListEntitiesServicesArgument");
@@ -1135,7 +1139,7 @@ void ExecuteServiceArgument::dump_to(std::string &out) const {
   dump_field(out, "string_", this->string_);
   dump_field(out, "int_", this->int_);
   for (const auto it : this->bool_array) {
-    dump_field(out, "bool_array", it, 4);
+    dump_field(out, "bool_array", static_cast<bool>(it), 4);
   }
   for (const auto &it : this->int_array) {
     dump_field(out, "int_array", it, 4);
@@ -1534,9 +1538,9 @@ void BluetoothLERawAdvertisement::dump_to(std::string &out) const {
 }
 void BluetoothLERawAdvertisementsResponse::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "BluetoothLERawAdvertisementsResponse");
-  for (const auto &it : this->advertisements) {
+  for (uint16_t i = 0; i < this->advertisements_len; i++) {
     out.append("  advertisements: ");
-    it.dump_to(out);
+    this->advertisements[i].dump_to(out);
     out.append("\n");
   }
 }
@@ -1704,6 +1708,7 @@ void BluetoothScannerStateResponse::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "BluetoothScannerStateResponse");
   dump_field(out, "state", static_cast<enums::BluetoothScannerState>(this->state));
   dump_field(out, "mode", static_cast<enums::BluetoothScannerMode>(this->mode));
+  dump_field(out, "configured_mode", static_cast<enums::BluetoothScannerMode>(this->configured_mode));
 }
 void BluetoothScannerSetModeRequest::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "BluetoothScannerSetModeRequest");

esphome/components/api/api_pb2_service.cpp

@@ -160,15 +160,6 @@ void APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type,
       break;
     }
 #endif
-    case GetTimeRequest::MESSAGE_TYPE: {
-      GetTimeRequest msg;
-      // Empty message: no decode needed
-#ifdef HAS_PROTO_MESSAGE_DUMP
-      ESP_LOGVV(TAG, "on_get_time_request: %s", msg.dump().c_str());
-#endif
-      this->on_get_time_request(msg);
-      break;
-    }
     case GetTimeResponse::MESSAGE_TYPE: {
       GetTimeResponse msg;
       msg.decode(msg_data, msg_size);
@@ -656,11 +647,6 @@ void APIServerConnection::on_subscribe_home_assistant_states_request(const Subsc
   }
 }
 #endif
-void APIServerConnection::on_get_time_request(const GetTimeRequest &msg) {
-  if (this->check_connection_setup_() && !this->send_get_time_response(msg)) {
-    this->on_fatal_error();
-  }
-}
 #ifdef USE_API_SERVICES
 void APIServerConnection::on_execute_service_request(const ExecuteServiceRequest &msg) {
   if (this->check_authenticated_()) {

esphome/components/api/api_pb2_service.h

@@ -71,7 +71,7 @@ class APIServerConnectionBase : public ProtoService {
 #ifdef USE_API_HOMEASSISTANT_STATES
   virtual void on_home_assistant_state_response(const HomeAssistantStateResponse &value){};
 #endif
-  virtual void on_get_time_request(const GetTimeRequest &value){};
+
   virtual void on_get_time_response(const GetTimeResponse &value){};
 
 #ifdef USE_API_SERVICES
@@ -226,7 +226,6 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_API_HOMEASSISTANT_STATES
   virtual void subscribe_home_assistant_states(const SubscribeHomeAssistantStatesRequest &msg) = 0;
 #endif
-  virtual bool send_get_time_response(const GetTimeRequest &msg) = 0;
 #ifdef USE_API_SERVICES
   virtual void execute_service(const ExecuteServiceRequest &msg) = 0;
 #endif
@@ -348,7 +347,6 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_API_HOMEASSISTANT_STATES
   void on_subscribe_home_assistant_states_request(const SubscribeHomeAssistantStatesRequest &msg) override;
 #endif
-  void on_get_time_request(const GetTimeRequest &msg) override;
 #ifdef USE_API_SERVICES
   void on_execute_service_request(const ExecuteServiceRequest &msg) override;
 #endif

esphome/components/api/client.py

@@ -62,9 +62,11 @@ async def async_run_logs(config: dict[str, Any], addresses: list[str]) -> None:
         time_ = datetime.now()
         message: bytes = msg.message
         text = message.decode("utf8", "backslashreplace")
-        for parsed_msg in parse_log_message(
-            text, f"[{time_.hour:02}:{time_.minute:02}:{time_.second:02}]"
-        ):
+        nanoseconds = time_.microsecond // 1000
+        timestamp = (
+            f"[{time_.hour:02}:{time_.minute:02}:{time_.second:02}.{nanoseconds:03}]"
+        )
+        for parsed_msg in parse_log_message(text, timestamp):
             print(parsed_msg.replace("\033", "\\033") if dashboard else parsed_msg)
 
     stop = await async_run(cli, on_log, name=name)

esphome/components/api/proto.cpp

@@ -8,74 +8,70 @@ namespace esphome::api {
 static const char *const TAG = "api.proto";
 
 void ProtoDecodableMessage::decode(const uint8_t *buffer, size_t length) {
-  uint32_t i = 0;
-  bool error = false;
-  while (i < length) {
+  const uint8_t *ptr = buffer;
+  const uint8_t *end = buffer + length;
+
+  while (ptr < end) {
     uint32_t consumed;
-    auto res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+
+    // Parse field header
+    auto res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
     if (!res.has_value()) {
-      ESP_LOGV(TAG, "Invalid field start at %" PRIu32, i);
-      break;
+      ESP_LOGV(TAG, "Invalid field start at offset %ld", (long) (ptr - buffer));
+      return;
     }
 
-    uint32_t field_type = (res->as_uint32()) & 0b111;
-    uint32_t field_id = (res->as_uint32()) >> 3;
-    i += consumed;
+    uint32_t tag = res->as_uint32();
+    uint32_t field_type = tag & 0b111;
+    uint32_t field_id = tag >> 3;
+    ptr += consumed;
 
     switch (field_type) {
       case 0: {  // VarInt
-        res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+        res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
         if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid VarInt at %" PRIu32, i);
-          error = true;
-          break;
+          ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
+          return;
         }
         if (!this->decode_varint(field_id, *res)) {
           ESP_LOGV(TAG, "Cannot decode VarInt field %" PRIu32 " with value %" PRIu32 "!", field_id, res->as_uint32());
         }
-        i += consumed;
+        ptr += consumed;
         break;
       }
       case 2: {  // Length-delimited
-        res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+        res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
         if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid Length Delimited at %" PRIu32, i);
-          error = true;
-          break;
+          ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
         }
         uint32_t field_length = res->as_uint32();
-        i += consumed;
-        if (field_length > length - i) {
-          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at %" PRIu32, i);
-          error = true;
-          break;
+        ptr += consumed;
+        if (ptr + field_length > end) {
+          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
         }
-        if (!this->decode_length(field_id, ProtoLengthDelimited(&buffer[i], field_length))) {
+        if (!this->decode_length(field_id, ProtoLengthDelimited(ptr, field_length))) {
           ESP_LOGV(TAG, "Cannot decode Length Delimited field %" PRIu32 "!", field_id);
         }
-        i += field_length;
+        ptr += field_length;
         break;
       }
       case 5: {  // 32-bit
-        if (length - i < 4) {
-          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at %" PRIu32, i);
-          error = true;
-          break;
+        if (ptr + 4 > end) {
+          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
+          return;
         }
-        uint32_t val = encode_uint32(buffer[i + 3], buffer[i + 2], buffer[i + 1], buffer[i]);
+        uint32_t val = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
         if (!this->decode_32bit(field_id, Proto32Bit(val))) {
           ESP_LOGV(TAG, "Cannot decode 32-bit field %" PRIu32 " with value %" PRIu32 "!", field_id, val);
         }
-        i += 4;
+        ptr += 4;
         break;
       }
       default:
-        ESP_LOGV(TAG, "Invalid field type at %" PRIu32, i);
-        error = true;
-        break;
-    }
-    if (error) {
-      break;
+        ESP_LOGV(TAG, "Invalid field type %u at offset %ld", field_type, (long) (ptr - buffer));
+        return;
     }
   }
 }

esphome/components/api/proto.h

@@ -15,6 +15,23 @@
 
 namespace esphome::api {
 
+// Helper functions for ZigZag encoding/decoding
+inline constexpr uint32_t encode_zigzag32(int32_t value) {
+  return (static_cast<uint32_t>(value) << 1) ^ (static_cast<uint32_t>(value >> 31));
+}
+
+inline constexpr uint64_t encode_zigzag64(int64_t value) {
+  return (static_cast<uint64_t>(value) << 1) ^ (static_cast<uint64_t>(value >> 63));
+}
+
+inline constexpr int32_t decode_zigzag32(uint32_t value) {
+  return (value & 1) ? static_cast<int32_t>(~(value >> 1)) : static_cast<int32_t>(value >> 1);
+}
+
+inline constexpr int64_t decode_zigzag64(uint64_t value) {
+  return (value & 1) ? static_cast<int64_t>(~(value >> 1)) : static_cast<int64_t>(value >> 1);
+}
+
 /*
  * StringRef Ownership Model for API Protocol Messages
  * ===================================================
@@ -87,33 +104,25 @@ class ProtoVarInt {
     return {};  // Incomplete or invalid varint
   }
 
-  uint16_t as_uint16() const { return this->value_; }
-  uint32_t as_uint32() const { return this->value_; }
-  uint64_t as_uint64() const { return this->value_; }
-  bool as_bool() const { return this->value_; }
-  int32_t as_int32() const {
+  constexpr uint16_t as_uint16() const { return this->value_; }
+  constexpr uint32_t as_uint32() const { return this->value_; }
+  constexpr uint64_t as_uint64() const { return this->value_; }
+  constexpr bool as_bool() const { return this->value_; }
+  constexpr int32_t as_int32() const {
     // Not ZigZag encoded
     return static_cast<int32_t>(this->as_int64());
   }
-  int64_t as_int64() const {
+  constexpr int64_t as_int64() const {
     // Not ZigZag encoded
     return static_cast<int64_t>(this->value_);
   }
-  int32_t as_sint32() const {
+  constexpr int32_t as_sint32() const {
     // with ZigZag encoding
-    if (this->value_ & 1) {
-      return static_cast<int32_t>(~(this->value_ >> 1));
-    } else {
-      return static_cast<int32_t>(this->value_ >> 1);
-    }
+    return decode_zigzag32(static_cast<uint32_t>(this->value_));
   }
-  int64_t as_sint64() const {
+  constexpr int64_t as_sint64() const {
     // with ZigZag encoding
-    if (this->value_ & 1) {
-      return static_cast<int64_t>(~(this->value_ >> 1));
-    } else {
-      return static_cast<int64_t>(this->value_ >> 1);
-    }
+    return decode_zigzag64(this->value_);
   }
   /**
    * Encode the varint value to a pre-allocated buffer without bounds checking.
@@ -309,22 +318,10 @@ class ProtoWriteBuffer {
     this->encode_uint64(field_id, static_cast<uint64_t>(value), force);
   }
   void encode_sint32(uint32_t field_id, int32_t value, bool force = false) {
-    uint32_t uvalue;
-    if (value < 0) {
-      uvalue = ~(value << 1);
-    } else {
-      uvalue = value << 1;
-    }
-    this->encode_uint32(field_id, uvalue, force);
+    this->encode_uint32(field_id, encode_zigzag32(value), force);
   }
   void encode_sint64(uint32_t field_id, int64_t value, bool force = false) {
-    uint64_t uvalue;
-    if (value < 0) {
-      uvalue = ~(value << 1);
-    } else {
-      uvalue = value << 1;
-    }
-    this->encode_uint64(field_id, uvalue, force);
+    this->encode_uint64(field_id, encode_zigzag64(value), force);
   }
   void encode_message(uint32_t field_id, const ProtoMessage &value, bool force = false);
   std::vector<uint8_t> *get_buffer() const { return buffer_; }
@@ -395,7 +392,7 @@ class ProtoSize {
    * @param value The uint32_t value to calculate size for
    * @return The number of bytes needed to encode the value
    */
-  static inline uint32_t varint(uint32_t value) {
+  static constexpr uint32_t varint(uint32_t value) {
     // Optimized varint size calculation using leading zeros
     // Each 7 bits requires one byte in the varint encoding
     if (value < 128)
@@ -419,7 +416,7 @@ class ProtoSize {
    * @param value The uint64_t value to calculate size for
    * @return The number of bytes needed to encode the value
    */
-  static inline uint32_t varint(uint64_t value) {
+  static constexpr uint32_t varint(uint64_t value) {
     // Handle common case of values fitting in uint32_t (vast majority of use cases)
     if (value <= UINT32_MAX) {
       return varint(static_cast<uint32_t>(value));
@@ -450,7 +447,7 @@ class ProtoSize {
    * @param value The int32_t value to calculate size for
    * @return The number of bytes needed to encode the value
    */
-  static inline uint32_t varint(int32_t value) {
+  static constexpr uint32_t varint(int32_t value) {
     // Negative values are sign-extended to 64 bits in protocol buffers,
     // which always results in a 10-byte varint for negative int32
     if (value < 0) {
@@ -466,7 +463,7 @@ class ProtoSize {
    * @param value The int64_t value to calculate size for
    * @return The number of bytes needed to encode the value
    */
-  static inline uint32_t varint(int64_t value) {
+  static constexpr uint32_t varint(int64_t value) {
     // For int64_t, we convert to uint64_t and calculate the size
     // This works because the bit pattern determines the encoding size,
     // and we've handled negative int32 values as a special case above
@@ -480,7 +477,7 @@ class ProtoSize {
    * @param type The wire type value (from the WireType enum in the protobuf spec)
    * @return The number of bytes needed to encode the field ID and wire type
    */
-  static inline uint32_t field(uint32_t field_id, uint32_t type) {
+  static constexpr uint32_t field(uint32_t field_id, uint32_t type) {
     uint32_t tag = (field_id << 3) | (type & 0b111);
     return varint(tag);
   }
@@ -607,9 +604,8 @@ class ProtoSize {
    */
   inline void add_sint32_force(uint32_t field_id_size, int32_t value) {
     // Always calculate size when force is true
-    // ZigZag encoding for sint32: (n << 1) ^ (n >> 31)
-    uint32_t zigzag = (static_cast<uint32_t>(value) << 1) ^ (static_cast<uint32_t>(value >> 31));
-    total_size_ += field_id_size + varint(zigzag);
+    // ZigZag encoding for sint32
+    total_size_ += field_id_size + varint(encode_zigzag32(value));
   }
 
   /**

esphome/components/as5600/__init__.py

@@ -7,6 +7,7 @@ from esphome.const import (
     CONF_DIRECTION,
     CONF_HYSTERESIS,
     CONF_ID,
+    CONF_POWER_MODE,
     CONF_RANGE,
 )
 
@@ -57,7 +58,6 @@ FAST_FILTER = {
 CONF_RAW_ANGLE = "raw_angle"
 CONF_RAW_POSITION = "raw_position"
 CONF_WATCHDOG = "watchdog"
-CONF_POWER_MODE = "power_mode"
 CONF_SLOW_FILTER = "slow_filter"
 CONF_FAST_FILTER = "fast_filter"
 CONF_START_POSITION = "start_position"

esphome/components/as5600/sensor/__init__.py

@@ -24,7 +24,6 @@ AS5600Sensor = as5600_ns.class_("AS5600Sensor", sensor.Sensor, cg.PollingCompone
 CONF_RAW_ANGLE = "raw_angle"
 CONF_RAW_POSITION = "raw_position"
 CONF_WATCHDOG = "watchdog"
-CONF_POWER_MODE = "power_mode"
 CONF_SLOW_FILTER = "slow_filter"
 CONF_FAST_FILTER = "fast_filter"
 CONF_PWM_FREQUENCY = "pwm_frequency"

esphome/components/async_tcp/__init__.py

@@ -8,7 +8,7 @@ from esphome.const import (
     PLATFORM_LN882X,
     PLATFORM_RTL87XX,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@esphome/core"]
 
@@ -27,7 +27,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(200.0)
+@coroutine_with_priority(CoroPriority.NETWORK_TRANSPORT)
 async def to_code(config):
     if CORE.is_esp32 or CORE.is_libretiny:
         # https://github.com/ESP32Async/AsyncTCP

esphome/components/atm90e26/sensor.py

@@ -16,6 +16,7 @@ from esphome.const import (
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_VOLTAGE,
     ICON_CURRENT_AC,
     ICON_LIGHTBULB,
@@ -78,6 +79,7 @@ CONFIG_SCHEMA = (
                 unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
                 icon=ICON_LIGHTBULB,
                 accuracy_decimals=2,
+                device_class=DEVICE_CLASS_REACTIVE_POWER,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
             cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(

esphome/components/atm90e32/atm90e32.cpp

@@ -110,6 +110,8 @@ void ATM90E32Component::update() {
 
 void ATM90E32Component::setup() {
   this->spi_setup();
+  this->cs_summary_ = this->cs_->dump_summary();
+  const char *cs = this->cs_summary_.c_str();
 
   uint16_t mmode0 = 0x87;  // 3P4W 50Hz
   uint16_t high_thresh = 0;
@@ -130,9 +132,9 @@ void ATM90E32Component::setup() {
     mmode0 |= 0 << 1;  // sets 1st bit to 0, phase b is not counted into the all-phase sum energy/power (P/Q/S)
   }
 
-  this->write16_(ATM90E32_REGISTER_SOFTRESET, 0x789A);    // Perform soft reset
-  delay(6);                                               // Wait for the minimum 5ms + 1ms
-  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);  // enable register config access
+  this->write16_(ATM90E32_REGISTER_SOFTRESET, 0x789A, false);  // Perform soft reset
+  delay(6);                                                    // Wait for the minimum 5ms + 1ms
+  this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x55AA);       // enable register config access
   if (!this->validate_spi_read_(0x55AA, "setup()")) {
     ESP_LOGW(TAG, "Could not initialize ATM90E32 IC, check SPI settings");
     this->mark_failed();
@@ -156,16 +158,17 @@ void ATM90E32Component::setup() {
 
   if (this->enable_offset_calibration_) {
     // Initialize flash storage for offset calibrations
-    uint32_t o_hash = fnv1_hash(std::string("_offset_calibration_") + this->cs_->dump_summary());
+    uint32_t o_hash = fnv1_hash(std::string("_offset_calibration_") + this->cs_summary_);
     this->offset_pref_ = global_preferences->make_preference<OffsetCalibration[3]>(o_hash, true);
     this->restore_offset_calibrations_();
 
     // Initialize flash storage for power offset calibrations
-    uint32_t po_hash = fnv1_hash(std::string("_power_offset_calibration_") + this->cs_->dump_summary());
+    uint32_t po_hash = fnv1_hash(std::string("_power_offset_calibration_") + this->cs_summary_);
     this->power_offset_pref_ = global_preferences->make_preference<PowerOffsetCalibration[3]>(po_hash, true);
     this->restore_power_offset_calibrations_();
   } else {
-    ESP_LOGI(TAG, "[CALIBRATION] Power & Voltage/Current offset calibration is disabled. Using config file values.");
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Power & Voltage/Current offset calibration is disabled. Using config file values.",
+             cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       this->write16_(this->voltage_offset_registers[phase],
                      static_cast<uint16_t>(this->offset_phase_[phase].voltage_offset_));
@@ -180,21 +183,18 @@ void ATM90E32Component::setup() {
 
   if (this->enable_gain_calibration_) {
     // Initialize flash storage for gain calibration
-    uint32_t g_hash = fnv1_hash(std::string("_gain_calibration_") + this->cs_->dump_summary());
+    uint32_t g_hash = fnv1_hash(std::string("_gain_calibration_") + this->cs_summary_);
     this->gain_calibration_pref_ = global_preferences->make_preference<GainCalibration[3]>(g_hash, true);
     this->restore_gain_calibrations_();
 
-    if (this->using_saved_calibrations_) {
-      ESP_LOGI(TAG, "[CALIBRATION] Successfully restored gain calibration from memory.");
-    } else {
+    if (!this->using_saved_calibrations_) {
       for (uint8_t phase = 0; phase < 3; ++phase) {
         this->write16_(voltage_gain_registers[phase], this->phase_[phase].voltage_gain_);
         this->write16_(current_gain_registers[phase], this->phase_[phase].ct_gain_);
       }
     }
   } else {
-    ESP_LOGI(TAG, "[CALIBRATION] Gain calibration is disabled. Using config file values.");
-
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Gain calibration is disabled. Using config file values.", cs);
     for (uint8_t phase = 0; phase < 3; ++phase) {
       this->write16_(voltage_gain_registers[phase], this->phase_[phase].voltage_gain_);
       this->write16_(current_gain_registers[phase], this->phase_[phase].ct_gain_);
@@ -213,6 +213,122 @@ void ATM90E32Component::setup() {
   this->write16_(ATM90E32_REGISTER_CFGREGACCEN, 0x0000);  // end configuration
 }
 
+void ATM90E32Component::log_calibration_status_() {
+  const char *cs = this->cs_summary_.c_str();
+
+  bool offset_mismatch = false;
+  bool power_mismatch = false;
+  bool gain_mismatch = false;
+
+  for (uint8_t phase = 0; phase < 3; ++phase) {
+    offset_mismatch |= this->offset_calibration_mismatch_[phase];
+    power_mismatch |= this->power_offset_calibration_mismatch_[phase];
+    gain_mismatch |= this->gain_calibration_mismatch_[phase];
+  }
+
+  if (offset_mismatch) {
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ===================== Offset mismatch: using flash values =====================", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] | Phase |   offset_voltage   |   offset_current   |", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] |       |  config  |  flash  |  config  |  flash  |", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    for (uint8_t phase = 0; phase < 3; ++phase) {
+      ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
+               this->config_offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].voltage_offset_,
+               this->config_offset_phase_[phase].current_offset_, this->offset_phase_[phase].current_offset_);
+    }
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ===============================================================================", cs);
+  }
+  if (power_mismatch) {
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ================= Power offset mismatch: using flash values =================", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] | Phase | offset_active_power|offset_reactive_power|", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] |       |  config  |  flash  |  config  |  flash  |", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    for (uint8_t phase = 0; phase < 3; ++phase) {
+      ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6d  | %6d  |  %6d  | %6d  |", cs, 'A' + phase,
+               this->config_power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].active_power_offset,
+               this->config_power_offset_phase_[phase].reactive_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
+    }
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ===============================================================================", cs);
+  }
+  if (gain_mismatch) {
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ====================== Gain mismatch: using flash values =====================", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] | Phase |    voltage_gain    |    current_gain    |", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] |       |  config  |  flash  |  config  |  flash  |", cs);
+    ESP_LOGW(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------------------",
+             cs);
+    for (uint8_t phase = 0; phase < 3; ++phase) {
+      ESP_LOGW(TAG, "[CALIBRATION][%s] |   %c   |  %6u  | %6u  |  %6u  | %6u  |", cs, 'A' + phase,
+               this->config_gain_phase_[phase].voltage_gain, this->gain_phase_[phase].voltage_gain,
+               this->config_gain_phase_[phase].current_gain, this->gain_phase_[phase].current_gain);
+    }
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] ===============================================================================", cs);
+  }
+  if (!this->enable_offset_calibration_) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Power & Voltage/Current offset calibration is disabled. Using config file values.",
+             cs);
+  } else if (this->restored_offset_calibration_ && !offset_mismatch) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ============== Restored offset calibration from memory ==============", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
+               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\\n", cs);
+  }
+
+  if (this->restored_power_offset_calibration_ && !power_mismatch) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ============ Restored power offset calibration from memory ============", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
+               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
+  }
+  if (!this->enable_gain_calibration_) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Gain calibration is disabled. Using config file values.", cs);
+  } else if (this->restored_gain_calibration_ && !gain_mismatch) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ============ Restoring saved gain calibrations to registers ============", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | voltage_gain | current_gain |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |    %6u    |    %6u    |", cs, 'A' + phase,
+               this->gain_phase_[phase].voltage_gain, this->gain_phase_[phase].current_gain);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\\n", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Gain calibration loaded and verified successfully.\n", cs);
+  }
+  this->calibration_message_printed_ = true;
+}
+
 void ATM90E32Component::dump_config() {
   ESP_LOGCONFIG("", "ATM90E32:");
   LOG_PIN("  CS Pin: ", this->cs_);
@@ -255,6 +371,10 @@ void ATM90E32Component::dump_config() {
   LOG_SENSOR("  ", "Peak Current C", this->phase_[PHASEC].peak_current_sensor_);
   LOG_SENSOR("  ", "Frequency", this->freq_sensor_);
   LOG_SENSOR("  ", "Chip Temp", this->chip_temperature_sensor_);
+  if (this->restored_offset_calibration_ || this->restored_power_offset_calibration_ ||
+      this->restored_gain_calibration_ || !this->enable_offset_calibration_ || !this->enable_gain_calibration_) {
+    this->log_calibration_status_();
+  }
 }
 
 float ATM90E32Component::get_setup_priority() const { return setup_priority::IO; }
@@ -263,19 +383,17 @@ float ATM90E32Component::get_setup_priority() const { return setup_priority::IO;
 // Peakdetect period: 05H. Bit 15:8 are PeakDet_period in ms. 7:0 are Sag_period
 // Default is 143FH (20ms, 63ms)
 uint16_t ATM90E32Component::read16_(uint16_t a_register) {
+  this->enable();
+  delay_microseconds_safe(1);  // min delay between CS low and first SCK is 200ns - 1us is plenty
   uint8_t addrh = (1 << 7) | ((a_register >> 8) & 0x03);
   uint8_t addrl = (a_register & 0xFF);
-  uint8_t data[2];
-  uint16_t output;
-  this->enable();
-  delay_microseconds_safe(1);  // min delay between CS low and first SCK is 200ns - 1ms is plenty
-  this->write_byte(addrh);
-  this->write_byte(addrl);
-  this->read_array(data, 2);
-  this->disable();
-
-  output = (uint16_t(data[0] & 0xFF) << 8) | (data[1] & 0xFF);
+  uint8_t data[4] = {addrh, addrl, 0x00, 0x00};
+  this->transfer_array(data, 4);
+  uint16_t output = encode_uint16(data[2], data[3]);
   ESP_LOGVV(TAG, "read16_ 0x%04" PRIX16 " output 0x%04" PRIX16, a_register, output);
+  delay_microseconds_safe(1);  // allow the last clock to propagate before releasing CS
+  this->disable();
+  delay_microseconds_safe(1);  // meet minimum CS high time before next transaction
   return output;
 }
 
@@ -292,13 +410,19 @@ int ATM90E32Component::read32_(uint16_t addr_h, uint16_t addr_l) {
   return val;
 }
 
-void ATM90E32Component::write16_(uint16_t a_register, uint16_t val) {
+void ATM90E32Component::write16_(uint16_t a_register, uint16_t val, bool validate) {
   ESP_LOGVV(TAG, "write16_ 0x%04" PRIX16 " val 0x%04" PRIX16, a_register, val);
+  uint8_t addrh = ((a_register >> 8) & 0x03);
+  uint8_t addrl = (a_register & 0xFF);
+  uint8_t data[4] = {addrh, addrl, uint8_t((val >> 8) & 0xFF), uint8_t(val & 0xFF)};
   this->enable();
-  this->write_byte16(a_register);
-  this->write_byte16(val);
+  delay_microseconds_safe(1);  // ensure CS setup time
+  this->write_array(data, 4);
+  delay_microseconds_safe(1);  // allow clock to settle before raising CS
   this->disable();
-  this->validate_spi_read_(val, "write16()");
+  delay_microseconds_safe(1);  // ensure minimum CS high time
+  if (validate)
+    this->validate_spi_read_(val, "write16()");
 }
 
 float ATM90E32Component::get_local_phase_voltage_(uint8_t phase) { return this->phase_[phase].voltage_; }
@@ -441,8 +565,10 @@ float ATM90E32Component::get_chip_temperature_() {
 }
 
 void ATM90E32Component::run_gain_calibrations() {
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_gain_calibration_) {
-    ESP_LOGW(TAG, "[CALIBRATION] Gain calibration is disabled! Enable it first with enable_gain_calibration: true");
+    ESP_LOGW(TAG, "[CALIBRATION][%s] Gain calibration is disabled! Enable it first with enable_gain_calibration: true",
+             cs);
     return;
   }
 
@@ -454,12 +580,14 @@ void ATM90E32Component::run_gain_calibrations() {
   float ref_currents[3] = {this->get_reference_current(0), this->get_reference_current(1),
                            this->get_reference_current(2)};
 
-  ESP_LOGI(TAG, "[CALIBRATION] ");
-  ESP_LOGI(TAG, "[CALIBRATION] ========================= Gain Calibration  =========================");
-  ESP_LOGI(TAG, "[CALIBRATION] ---------------------------------------------------------------------");
-  ESP_LOGI(TAG,
-           "[CALIBRATION] | Phase | V_meas (V) | I_meas (A) | V_ref | I_ref  | V_gain (old→new) | I_gain (old→new) |");
-  ESP_LOGI(TAG, "[CALIBRATION] ---------------------------------------------------------------------");
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ========================= Gain Calibration  =========================", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+  ESP_LOGI(
+      TAG,
+      "[CALIBRATION][%s] | Phase | V_meas (V) | I_meas (A) | V_ref | I_ref  | V_gain (old→new) | I_gain (old→new) |",
+      cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
 
   for (uint8_t phase = 0; phase < 3; phase++) {
     float measured_voltage = this->get_phase_voltage_avg_(phase);
@@ -476,22 +604,22 @@ void ATM90E32Component::run_gain_calibrations() {
 
     // Voltage calibration
     if (ref_voltage <= 0.0f) {
-      ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Skipping voltage calibration: reference voltage is 0.",
+      ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Skipping voltage calibration: reference voltage is 0.", cs,
                phase_labels[phase]);
     } else if (measured_voltage == 0.0f) {
-      ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Skipping voltage calibration: measured voltage is 0.",
+      ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Skipping voltage calibration: measured voltage is 0.", cs,
                phase_labels[phase]);
     } else {
       uint32_t new_voltage_gain = static_cast<uint16_t>((ref_voltage / measured_voltage) * current_voltage_gain);
       if (new_voltage_gain == 0) {
-        ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Voltage gain would be 0. Check reference and measured voltage.",
+        ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Voltage gain would be 0. Check reference and measured voltage.", cs,
                  phase_labels[phase]);
       } else {
         if (new_voltage_gain >= 65535) {
-          ESP_LOGW(
-              TAG,
-              "[CALIBRATION] Phase %s - Voltage gain exceeds 65535. You may need a higher output voltage transformer.",
-              phase_labels[phase]);
+          ESP_LOGW(TAG,
+                   "[CALIBRATION][%s] Phase %s - Voltage gain exceeds 65535. You may need a higher output voltage "
+                   "transformer.",
+                   cs, phase_labels[phase]);
           new_voltage_gain = 65535;
         }
         this->gain_phase_[phase].voltage_gain = static_cast<uint16_t>(new_voltage_gain);
@@ -501,20 +629,20 @@ void ATM90E32Component::run_gain_calibrations() {
 
     // Current calibration
     if (ref_current == 0.0f) {
-      ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Skipping current calibration: reference current is 0.",
+      ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Skipping current calibration: reference current is 0.", cs,
                phase_labels[phase]);
     } else if (measured_current == 0.0f) {
-      ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Skipping current calibration: measured current is 0.",
+      ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Skipping current calibration: measured current is 0.", cs,
                phase_labels[phase]);
     } else {
       uint32_t new_current_gain = static_cast<uint16_t>((ref_current / measured_current) * current_current_gain);
       if (new_current_gain == 0) {
-        ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Current gain would be 0. Check reference and measured current.",
+        ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Current gain would be 0. Check reference and measured current.", cs,
                  phase_labels[phase]);
       } else {
         if (new_current_gain >= 65535) {
-          ESP_LOGW(TAG, "[CALIBRATION] Phase %s - Current gain exceeds 65535. You may need to turn up pga gain.",
-                   phase_labels[phase]);
+          ESP_LOGW(TAG, "[CALIBRATION][%s] Phase %s - Current gain exceeds 65535. You may need to turn up pga gain.",
+                   cs, phase_labels[phase]);
           new_current_gain = 65535;
         }
         this->gain_phase_[phase].current_gain = static_cast<uint16_t>(new_current_gain);
@@ -523,13 +651,13 @@ void ATM90E32Component::run_gain_calibrations() {
     }
 
     // Final row output
-    ESP_LOGI(TAG, "[CALIBRATION] |   %c   |  %9.2f |  %9.4f | %5.2f | %6.4f |  %5u → %-5u  |  %5u → %-5u  |",
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |  %9.2f |  %9.4f | %5.2f | %6.4f |  %5u → %-5u  |  %5u → %-5u  |", cs,
              'A' + phase, measured_voltage, measured_current, ref_voltage, ref_current, current_voltage_gain,
              did_voltage ? this->gain_phase_[phase].voltage_gain : current_voltage_gain, current_current_gain,
              did_current ? this->gain_phase_[phase].current_gain : current_current_gain);
   }
 
-  ESP_LOGI(TAG, "[CALIBRATION] =====================================================================\n");
+  ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
   this->save_gain_calibration_to_memory_();
   this->write_gains_to_registers_();
@@ -537,54 +665,108 @@ void ATM90E32Component::run_gain_calibrations() {
 }
 
 void ATM90E32Component::save_gain_calibration_to_memory_() {
+  const char *cs = this->cs_summary_.c_str();
   bool success = this->gain_calibration_pref_.save(&this->gain_phase_);
+  global_preferences->sync();
   if (success) {
     this->using_saved_calibrations_ = true;
-    ESP_LOGI(TAG, "[CALIBRATION] Gain calibration saved to memory.");
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Gain calibration saved to memory.", cs);
   } else {
     this->using_saved_calibrations_ = false;
-    ESP_LOGE(TAG, "[CALIBRATION] Failed to save gain calibration to memory!");
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save gain calibration to memory!", cs);
+  }
+}
+
+void ATM90E32Component::save_offset_calibration_to_memory_() {
+  const char *cs = this->cs_summary_.c_str();
+  bool success = this->offset_pref_.save(&this->offset_phase_);
+  global_preferences->sync();
+  if (success) {
+    this->using_saved_calibrations_ = true;
+    this->restored_offset_calibration_ = true;
+    for (bool &phase : this->offset_calibration_mismatch_)
+      phase = false;
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Offset calibration saved to memory.", cs);
+  } else {
+    this->using_saved_calibrations_ = false;
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save offset calibration to memory!", cs);
+  }
+}
+
+void ATM90E32Component::save_power_offset_calibration_to_memory_() {
+  const char *cs = this->cs_summary_.c_str();
+  bool success = this->power_offset_pref_.save(&this->power_offset_phase_);
+  global_preferences->sync();
+  if (success) {
+    this->using_saved_calibrations_ = true;
+    this->restored_power_offset_calibration_ = true;
+    for (bool &phase : this->power_offset_calibration_mismatch_)
+      phase = false;
+    ESP_LOGI(TAG, "[CALIBRATION][%s] Power offset calibration saved to memory.", cs);
+  } else {
+    this->using_saved_calibrations_ = false;
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to save power offset calibration to memory!", cs);
   }
 }
 
 void ATM90E32Component::run_offset_calibrations() {
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_offset_calibration_) {
-    ESP_LOGW(TAG, "[CALIBRATION] Offset calibration is disabled! Enable it first with enable_offset_calibration: true");
+    ESP_LOGW(TAG,
+             "[CALIBRATION][%s] Offset calibration is disabled! Enable it first with enable_offset_calibration: true",
+             cs);
     return;
   }
 
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ======================== Offset Calibration ========================", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ------------------------------------------------------------------", cs);
+
   for (uint8_t phase = 0; phase < 3; phase++) {
     int16_t voltage_offset = calibrate_offset(phase, true);
     int16_t current_offset = calibrate_offset(phase, false);
 
     this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
 
-    ESP_LOGI(TAG, "[CALIBRATION] Phase %c - offset_voltage: %d, offset_current: %d", 'A' + phase, voltage_offset,
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
              current_offset);
   }
 
-  this->offset_pref_.save(&this->offset_phase_);  // Save to flash
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ==================================================================\n", cs);
+
+  this->save_offset_calibration_to_memory_();
 }
 
 void ATM90E32Component::run_power_offset_calibrations() {
+  const char *cs = this->cs_summary_.c_str();
   if (!this->enable_offset_calibration_) {
     ESP_LOGW(
         TAG,
-        "[CALIBRATION] Offset power calibration is disabled! Enable it first with enable_offset_calibration: true");
+        "[CALIBRATION][%s] Offset power calibration is disabled! Enable it first with enable_offset_calibration: true",
+        cs);
     return;
   }
 
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ===================== Power Offset Calibration =====================", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+
   for (uint8_t phase = 0; phase < 3; ++phase) {
     int16_t active_offset = calibrate_power_offset(phase, false);
     int16_t reactive_offset = calibrate_power_offset(phase, true);
 
     this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
 
-    ESP_LOGI(TAG, "[CALIBRATION] Phase %c - offset_active_power: %d, offset_reactive_power: %d", 'A' + phase,
-             active_offset, reactive_offset);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
+             reactive_offset);
   }
+  ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
 
-  this->power_offset_pref_.save(&this->power_offset_phase_);  // Save to flash
+  this->save_power_offset_calibration_to_memory_();
 }
 
 void ATM90E32Component::write_gains_to_registers_() {
@@ -631,102 +813,276 @@ void ATM90E32Component::write_power_offsets_to_registers_(uint8_t phase, int16_t
 }
 
 void ATM90E32Component::restore_gain_calibrations_() {
-  if (this->gain_calibration_pref_.load(&this->gain_phase_)) {
-    ESP_LOGI(TAG, "[CALIBRATION] Restoring saved gain calibrations to registers:");
-
-    for (uint8_t phase = 0; phase < 3; phase++) {
-      uint16_t v_gain = this->gain_phase_[phase].voltage_gain;
-      uint16_t i_gain = this->gain_phase_[phase].current_gain;
-      ESP_LOGI(TAG, "[CALIBRATION]   Phase %c - Voltage Gain: %u, Current Gain: %u", 'A' + phase, v_gain, i_gain);
-    }
-
-    this->write_gains_to_registers_();
-
-    if (this->verify_gain_writes_()) {
-      this->using_saved_calibrations_ = true;
-      ESP_LOGI(TAG, "[CALIBRATION] Gain calibration loaded and verified successfully.");
-    } else {
-      this->using_saved_calibrations_ = false;
-      ESP_LOGE(TAG, "[CALIBRATION] Gain verification failed! Calibration may not be applied correctly.");
-    }
-  } else {
-    this->using_saved_calibrations_ = false;
-    ESP_LOGW(TAG, "[CALIBRATION] No stored gain calibrations found. Using config file values.");
+  const char *cs = this->cs_summary_.c_str();
+  for (uint8_t i = 0; i < 3; ++i) {
+    this->config_gain_phase_[i].voltage_gain = this->phase_[i].voltage_gain_;
+    this->config_gain_phase_[i].current_gain = this->phase_[i].ct_gain_;
+    this->gain_phase_[i] = this->config_gain_phase_[i];
   }
+
+  if (this->gain_calibration_pref_.load(&this->gain_phase_)) {
+    bool all_zero = true;
+    bool same_as_config = true;
+    for (uint8_t phase = 0; phase < 3; ++phase) {
+      const auto &cfg = this->config_gain_phase_[phase];
+      const auto &saved = this->gain_phase_[phase];
+      if (saved.voltage_gain != 0 || saved.current_gain != 0)
+        all_zero = false;
+      if (saved.voltage_gain != cfg.voltage_gain || saved.current_gain != cfg.current_gain)
+        same_as_config = false;
+    }
+
+    if (!all_zero && !same_as_config) {
+      for (uint8_t phase = 0; phase < 3; ++phase) {
+        bool mismatch = false;
+        if (this->has_config_voltage_gain_[phase] &&
+            this->gain_phase_[phase].voltage_gain != this->config_gain_phase_[phase].voltage_gain)
+          mismatch = true;
+        if (this->has_config_current_gain_[phase] &&
+            this->gain_phase_[phase].current_gain != this->config_gain_phase_[phase].current_gain)
+          mismatch = true;
+        if (mismatch)
+          this->gain_calibration_mismatch_[phase] = true;
+      }
+
+      this->write_gains_to_registers_();
+
+      if (this->verify_gain_writes_()) {
+        this->using_saved_calibrations_ = true;
+        this->restored_gain_calibration_ = true;
+        return;
+      }
+
+      this->using_saved_calibrations_ = false;
+      ESP_LOGE(TAG, "[CALIBRATION][%s] Gain verification failed! Calibration may not be applied correctly.", cs);
+    }
+  }
+
+  this->using_saved_calibrations_ = false;
+  for (uint8_t i = 0; i < 3; ++i)
+    this->gain_phase_[i] = this->config_gain_phase_[i];
+  this->write_gains_to_registers_();
+
+  ESP_LOGW(TAG, "[CALIBRATION][%s] No stored gain calibrations found. Using config file values.", cs);
 }
 
 void ATM90E32Component::restore_offset_calibrations_() {
-  if (this->offset_pref_.load(&this->offset_phase_)) {
-    ESP_LOGI(TAG, "[CALIBRATION] Successfully restored offset calibration from memory.");
+  const char *cs = this->cs_summary_.c_str();
+  for (uint8_t i = 0; i < 3; ++i)
+    this->config_offset_phase_[i] = this->offset_phase_[i];
 
+  bool have_data = this->offset_pref_.load(&this->offset_phase_);
+  bool all_zero = true;
+  if (have_data) {
+    for (auto &phase : this->offset_phase_) {
+      if (phase.voltage_offset_ != 0 || phase.current_offset_ != 0) {
+        all_zero = false;
+        break;
+      }
+    }
+  }
+
+  if (have_data && !all_zero) {
+    this->restored_offset_calibration_ = true;
     for (uint8_t phase = 0; phase < 3; phase++) {
       auto &offset = this->offset_phase_[phase];
-      write_offsets_to_registers_(phase, offset.voltage_offset_, offset.current_offset_);
-      ESP_LOGI(TAG, "[CALIBRATION] Phase %c - offset_voltage:: %d, offset_current: %d", 'A' + phase,
-               offset.voltage_offset_, offset.current_offset_);
+      bool mismatch = false;
+      if (this->has_config_voltage_offset_[phase] &&
+          offset.voltage_offset_ != this->config_offset_phase_[phase].voltage_offset_)
+        mismatch = true;
+      if (this->has_config_current_offset_[phase] &&
+          offset.current_offset_ != this->config_offset_phase_[phase].current_offset_)
+        mismatch = true;
+      if (mismatch)
+        this->offset_calibration_mismatch_[phase] = true;
     }
   } else {
-    ESP_LOGW(TAG, "[CALIBRATION] No stored offset calibrations found. Using default values.");
+    for (uint8_t phase = 0; phase < 3; phase++)
+      this->offset_phase_[phase] = this->config_offset_phase_[phase];
+    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored offset calibrations found. Using default values.", cs);
+  }
+
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    write_offsets_to_registers_(phase, this->offset_phase_[phase].voltage_offset_,
+                                this->offset_phase_[phase].current_offset_);
   }
 }
 
 void ATM90E32Component::restore_power_offset_calibrations_() {
-  if (this->power_offset_pref_.load(&this->power_offset_phase_)) {
-    ESP_LOGI(TAG, "[CALIBRATION] Successfully restored power offset calibration from memory.");
+  const char *cs = this->cs_summary_.c_str();
+  for (uint8_t i = 0; i < 3; ++i)
+    this->config_power_offset_phase_[i] = this->power_offset_phase_[i];
 
+  bool have_data = this->power_offset_pref_.load(&this->power_offset_phase_);
+  bool all_zero = true;
+  if (have_data) {
+    for (auto &phase : this->power_offset_phase_) {
+      if (phase.active_power_offset != 0 || phase.reactive_power_offset != 0) {
+        all_zero = false;
+        break;
+      }
+    }
+  }
+
+  if (have_data && !all_zero) {
+    this->restored_power_offset_calibration_ = true;
     for (uint8_t phase = 0; phase < 3; ++phase) {
       auto &offset = this->power_offset_phase_[phase];
-      write_power_offsets_to_registers_(phase, offset.active_power_offset, offset.reactive_power_offset);
-      ESP_LOGI(TAG, "[CALIBRATION] Phase %c - offset_active_power: %d, offset_reactive_power: %d", 'A' + phase,
-               offset.active_power_offset, offset.reactive_power_offset);
+      bool mismatch = false;
+      if (this->has_config_active_power_offset_[phase] &&
+          offset.active_power_offset != this->config_power_offset_phase_[phase].active_power_offset)
+        mismatch = true;
+      if (this->has_config_reactive_power_offset_[phase] &&
+          offset.reactive_power_offset != this->config_power_offset_phase_[phase].reactive_power_offset)
+        mismatch = true;
+      if (mismatch)
+        this->power_offset_calibration_mismatch_[phase] = true;
     }
   } else {
-    ESP_LOGW(TAG, "[CALIBRATION] No stored power offsets found. Using default values.");
+    for (uint8_t phase = 0; phase < 3; ++phase)
+      this->power_offset_phase_[phase] = this->config_power_offset_phase_[phase];
+    ESP_LOGW(TAG, "[CALIBRATION][%s] No stored power offsets found. Using default values.", cs);
+  }
+
+  for (uint8_t phase = 0; phase < 3; ++phase) {
+    write_power_offsets_to_registers_(phase, this->power_offset_phase_[phase].active_power_offset,
+                                      this->power_offset_phase_[phase].reactive_power_offset);
   }
 }
 
 void ATM90E32Component::clear_gain_calibrations() {
-  ESP_LOGI(TAG, "[CALIBRATION] Clearing stored gain calibrations and restoring config-defined values");
-
-  for (int phase = 0; phase < 3; phase++) {
-    gain_phase_[phase].voltage_gain = this->phase_[phase].voltage_gain_;
-    gain_phase_[phase].current_gain = this->phase_[phase].ct_gain_;
+  const char *cs = this->cs_summary_.c_str();
+  if (!this->using_saved_calibrations_) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] No stored gain calibrations to clear. Current values:", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ----------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | voltage_gain | current_gain |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ----------------------------------------------------------", cs);
+    for (int phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |    %6u    |    %6u    |", cs, 'A' + phase,
+               this->gain_phase_[phase].voltage_gain, this->gain_phase_[phase].current_gain);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ==========================================================\n", cs);
+    return;
   }
 
-  bool success = this->gain_calibration_pref_.save(&this->gain_phase_);
-  this->using_saved_calibrations_ = false;
+  ESP_LOGI(TAG, "[CALIBRATION][%s] Clearing stored gain calibrations and restoring config-defined values", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ----------------------------------------------------------", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | voltage_gain | current_gain |", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ----------------------------------------------------------", cs);
 
-  if (success) {
-    ESP_LOGI(TAG, "[CALIBRATION] Gain calibrations cleared. Config values restored:");
-    for (int phase = 0; phase < 3; phase++) {
-      ESP_LOGI(TAG, "[CALIBRATION]   Phase %c - Voltage Gain: %u, Current Gain: %u", 'A' + phase,
-               gain_phase_[phase].voltage_gain, gain_phase_[phase].current_gain);
-    }
-  } else {
-    ESP_LOGE(TAG, "[CALIBRATION] Failed to clear gain calibrations!");
+  for (int phase = 0; phase < 3; phase++) {
+    uint16_t voltage_gain = this->phase_[phase].voltage_gain_;
+    uint16_t current_gain = this->phase_[phase].ct_gain_;
+
+    this->config_gain_phase_[phase].voltage_gain = voltage_gain;
+    this->config_gain_phase_[phase].current_gain = current_gain;
+    this->gain_phase_[phase].voltage_gain = voltage_gain;
+    this->gain_phase_[phase].current_gain = current_gain;
+
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |    %6u    |    %6u    |", cs, 'A' + phase, voltage_gain, current_gain);
+  }
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ==========================================================\n", cs);
+
+  GainCalibration zero_gains[3]{{0, 0}, {0, 0}, {0, 0}};
+  bool success = this->gain_calibration_pref_.save(&zero_gains);
+  global_preferences->sync();
+
+  this->using_saved_calibrations_ = false;
+  this->restored_gain_calibration_ = false;
+  for (bool &phase : this->gain_calibration_mismatch_)
+    phase = false;
+
+  if (!success) {
+    ESP_LOGE(TAG, "[CALIBRATION][%s] Failed to clear gain calibrations!", cs);
   }
 
   this->write_gains_to_registers_();  // Apply them to the chip immediately
 }
 
 void ATM90E32Component::clear_offset_calibrations() {
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    this->write_offsets_to_registers_(phase, 0, 0);
+  const char *cs = this->cs_summary_.c_str();
+  if (!this->restored_offset_calibration_) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] No stored offset calibrations to clear. Current values:", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase,
+               this->offset_phase_[phase].voltage_offset_, this->offset_phase_[phase].current_offset_);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\n", cs);
+    return;
   }
 
-  this->offset_pref_.save(&this->offset_phase_);  // Save cleared values to flash memory
+  ESP_LOGI(TAG, "[CALIBRATION][%s] Clearing stored offset calibrations and restoring config-defined values", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_voltage | offset_current |", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] --------------------------------------------------------------", cs);
 
-  ESP_LOGI(TAG, "[CALIBRATION] Offsets cleared.");
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    int16_t voltage_offset =
+        this->has_config_voltage_offset_[phase] ? this->config_offset_phase_[phase].voltage_offset_ : 0;
+    int16_t current_offset =
+        this->has_config_current_offset_[phase] ? this->config_offset_phase_[phase].current_offset_ : 0;
+    this->write_offsets_to_registers_(phase, voltage_offset, current_offset);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |     %6d      |     %6d      |", cs, 'A' + phase, voltage_offset,
+             current_offset);
+  }
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ==============================================================\n", cs);
+
+  OffsetCalibration zero_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
+  this->offset_pref_.save(&zero_offsets);  // Clear stored values in flash
+  global_preferences->sync();
+
+  this->restored_offset_calibration_ = false;
+  for (bool &phase : this->offset_calibration_mismatch_)
+    phase = false;
+
+  ESP_LOGI(TAG, "[CALIBRATION][%s] Offsets cleared.", cs);
 }
 
 void ATM90E32Component::clear_power_offset_calibrations() {
-  for (uint8_t phase = 0; phase < 3; phase++) {
-    this->write_power_offsets_to_registers_(phase, 0, 0);
+  const char *cs = this->cs_summary_.c_str();
+  if (!this->restored_power_offset_calibration_) {
+    ESP_LOGI(TAG, "[CALIBRATION][%s] No stored power offsets to clear. Current values:", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+    for (uint8_t phase = 0; phase < 3; phase++) {
+      ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase,
+               this->power_offset_phase_[phase].active_power_offset,
+               this->power_offset_phase_[phase].reactive_power_offset);
+    }
+    ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
+    return;
   }
 
-  this->power_offset_pref_.save(&this->power_offset_phase_);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] Clearing stored power offsets and restoring config-defined values", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] | Phase | offset_active_power | offset_reactive_power |", cs);
+  ESP_LOGI(TAG, "[CALIBRATION][%s] ---------------------------------------------------------------------", cs);
 
-  ESP_LOGI(TAG, "[CALIBRATION] Power offsets cleared.");
+  for (uint8_t phase = 0; phase < 3; phase++) {
+    int16_t active_offset =
+        this->has_config_active_power_offset_[phase] ? this->config_power_offset_phase_[phase].active_power_offset : 0;
+    int16_t reactive_offset = this->has_config_reactive_power_offset_[phase]
+                                  ? this->config_power_offset_phase_[phase].reactive_power_offset
+                                  : 0;
+    this->write_power_offsets_to_registers_(phase, active_offset, reactive_offset);
+    ESP_LOGI(TAG, "[CALIBRATION][%s] |   %c   |       %6d        |        %6d        |", cs, 'A' + phase, active_offset,
+             reactive_offset);
+  }
+  ESP_LOGI(TAG, "[CALIBRATION][%s] =====================================================================\n", cs);
+
+  PowerOffsetCalibration zero_power_offsets[3]{{0, 0}, {0, 0}, {0, 0}};
+  this->power_offset_pref_.save(&zero_power_offsets);
+  global_preferences->sync();
+
+  this->restored_power_offset_calibration_ = false;
+  for (bool &phase : this->power_offset_calibration_mismatch_)
+    phase = false;
+
+  ESP_LOGI(TAG, "[CALIBRATION][%s] Power offsets cleared.", cs);
 }
 
 int16_t ATM90E32Component::calibrate_offset(uint8_t phase, bool voltage) {
@@ -747,20 +1103,21 @@ int16_t ATM90E32Component::calibrate_offset(uint8_t phase, bool voltage) {
 
 int16_t ATM90E32Component::calibrate_power_offset(uint8_t phase, bool reactive) {
   const uint8_t num_reads = 5;
-  uint64_t total_value = 0;
+  int64_t total_value = 0;
 
   for (uint8_t i = 0; i < num_reads; ++i) {
-    uint32_t reading = reactive ? this->read32_(ATM90E32_REGISTER_QMEAN + phase, ATM90E32_REGISTER_QMEANLSB + phase)
-                                : this->read32_(ATM90E32_REGISTER_PMEAN + phase, ATM90E32_REGISTER_PMEANLSB + phase);
+    int32_t reading = reactive ? this->read32_(ATM90E32_REGISTER_QMEAN + phase, ATM90E32_REGISTER_QMEANLSB + phase)
+                               : this->read32_(ATM90E32_REGISTER_PMEAN + phase, ATM90E32_REGISTER_PMEANLSB + phase);
     total_value += reading;
   }
 
-  const uint32_t average_value = total_value / num_reads;
-  const uint32_t power_offset = ~average_value + 1;
+  int32_t average_value = total_value / num_reads;
+  int32_t power_offset = -average_value;
   return static_cast<int16_t>(power_offset);  // Takes the lower 16 bits
 }
 
 bool ATM90E32Component::verify_gain_writes_() {
+  const char *cs = this->cs_summary_.c_str();
   bool success = true;
   for (uint8_t phase = 0; phase < 3; phase++) {
     uint16_t read_voltage = this->read16_(voltage_gain_registers[phase]);
@@ -768,7 +1125,7 @@ bool ATM90E32Component::verify_gain_writes_() {
 
     if (read_voltage != this->gain_phase_[phase].voltage_gain ||
         read_current != this->gain_phase_[phase].current_gain) {
-      ESP_LOGE(TAG, "[CALIBRATION] Mismatch detected for Phase %s!", phase_labels[phase]);
+      ESP_LOGE(TAG, "[CALIBRATION][%s] Mismatch detected for Phase %s!", cs, phase_labels[phase]);
       success = false;
     }
   }
@@ -791,16 +1148,16 @@ void ATM90E32Component::check_phase_status() {
       status += "Phase Loss; ";
 
     auto *sensor = this->phase_status_text_sensor_[phase];
-    const char *phase_name = sensor ? sensor->get_name().c_str() : "Unknown Phase";
+    if (sensor == nullptr)
+      continue;
+
     if (!status.empty()) {
       status.pop_back();  // remove space
       status.pop_back();  // remove semicolon
-      ESP_LOGW(TAG, "%s: %s", phase_name, status.c_str());
-      if (sensor != nullptr)
-        sensor->publish_state(status);
+      ESP_LOGW(TAG, "%s: %s", sensor->get_name().c_str(), status.c_str());
+      sensor->publish_state(status);
     } else {
-      if (sensor != nullptr)
-        sensor->publish_state("Okay");
+      sensor->publish_state("Okay");
     }
   }
 }
@@ -817,9 +1174,12 @@ void ATM90E32Component::check_freq_status() {
   } else {
     freq_status = "Normal";
   }
-  ESP_LOGW(TAG, "Frequency status: %s", freq_status.c_str());
-
   if (this->freq_status_text_sensor_ != nullptr) {
+    if (freq_status == "Normal") {
+      ESP_LOGD(TAG, "Frequency status: %s", freq_status.c_str());
+    } else {
+      ESP_LOGW(TAG, "Frequency status: %s", freq_status.c_str());
+    }
     this->freq_status_text_sensor_->publish_state(freq_status);
   }
 }

esphome/components/atm90e32/atm90e32.h

@@ -61,15 +61,29 @@ class ATM90E32Component : public PollingComponent,
     this->phase_[phase].harmonic_active_power_sensor_ = obj;
   }
   void set_peak_current_sensor(int phase, sensor::Sensor *obj) { this->phase_[phase].peak_current_sensor_ = obj; }
-  void set_volt_gain(int phase, uint16_t gain) { this->phase_[phase].voltage_gain_ = gain; }
-  void set_ct_gain(int phase, uint16_t gain) { this->phase_[phase].ct_gain_ = gain; }
-  void set_voltage_offset(uint8_t phase, int16_t offset) { this->offset_phase_[phase].voltage_offset_ = offset; }
-  void set_current_offset(uint8_t phase, int16_t offset) { this->offset_phase_[phase].current_offset_ = offset; }
+  void set_volt_gain(int phase, uint16_t gain) {
+    this->phase_[phase].voltage_gain_ = gain;
+    this->has_config_voltage_gain_[phase] = true;
+  }
+  void set_ct_gain(int phase, uint16_t gain) {
+    this->phase_[phase].ct_gain_ = gain;
+    this->has_config_current_gain_[phase] = true;
+  }
+  void set_voltage_offset(uint8_t phase, int16_t offset) {
+    this->offset_phase_[phase].voltage_offset_ = offset;
+    this->has_config_voltage_offset_[phase] = true;
+  }
+  void set_current_offset(uint8_t phase, int16_t offset) {
+    this->offset_phase_[phase].current_offset_ = offset;
+    this->has_config_current_offset_[phase] = true;
+  }
   void set_active_power_offset(uint8_t phase, int16_t offset) {
     this->power_offset_phase_[phase].active_power_offset = offset;
+    this->has_config_active_power_offset_[phase] = true;
   }
   void set_reactive_power_offset(uint8_t phase, int16_t offset) {
     this->power_offset_phase_[phase].reactive_power_offset = offset;
+    this->has_config_reactive_power_offset_[phase] = true;
   }
   void set_freq_sensor(sensor::Sensor *freq_sensor) { freq_sensor_ = freq_sensor; }
   void set_peak_current_signed(bool flag) { peak_current_signed_ = flag; }
@@ -127,7 +141,7 @@ class ATM90E32Component : public PollingComponent,
 #endif
   uint16_t read16_(uint16_t a_register);
   int read32_(uint16_t addr_h, uint16_t addr_l);
-  void write16_(uint16_t a_register, uint16_t val);
+  void write16_(uint16_t a_register, uint16_t val, bool validate = true);
   float get_local_phase_voltage_(uint8_t phase);
   float get_local_phase_current_(uint8_t phase);
   float get_local_phase_active_power_(uint8_t phase);
@@ -159,12 +173,15 @@ class ATM90E32Component : public PollingComponent,
   void restore_offset_calibrations_();
   void restore_power_offset_calibrations_();
   void restore_gain_calibrations_();
+  void save_offset_calibration_to_memory_();
   void save_gain_calibration_to_memory_();
+  void save_power_offset_calibration_to_memory_();
   void write_offsets_to_registers_(uint8_t phase, int16_t voltage_offset, int16_t current_offset);
   void write_power_offsets_to_registers_(uint8_t phase, int16_t p_offset, int16_t q_offset);
   void write_gains_to_registers_();
   bool verify_gain_writes_();
   bool validate_spi_read_(uint16_t expected, const char *context = nullptr);
+  void log_calibration_status_();
 
   struct ATM90E32Phase {
     uint16_t voltage_gain_{0};
@@ -204,19 +221,33 @@ class ATM90E32Component : public PollingComponent,
     int16_t current_offset_{0};
   } offset_phase_[3];
 
+  OffsetCalibration config_offset_phase_[3];
+
   struct PowerOffsetCalibration {
     int16_t active_power_offset{0};
     int16_t reactive_power_offset{0};
   } power_offset_phase_[3];
 
+  PowerOffsetCalibration config_power_offset_phase_[3];
+
   struct GainCalibration {
     uint16_t voltage_gain{1};
     uint16_t current_gain{1};
   } gain_phase_[3];
 
+  GainCalibration config_gain_phase_[3];
+
+  bool has_config_voltage_offset_[3]{false, false, false};
+  bool has_config_current_offset_[3]{false, false, false};
+  bool has_config_active_power_offset_[3]{false, false, false};
+  bool has_config_reactive_power_offset_[3]{false, false, false};
+  bool has_config_voltage_gain_[3]{false, false, false};
+  bool has_config_current_gain_[3]{false, false, false};
+
   ESPPreferenceObject offset_pref_;
   ESPPreferenceObject power_offset_pref_;
   ESPPreferenceObject gain_calibration_pref_;
+  std::string cs_summary_;
 
   sensor::Sensor *freq_sensor_{nullptr};
 #ifdef USE_TEXT_SENSOR
@@ -231,6 +262,13 @@ class ATM90E32Component : public PollingComponent,
   bool peak_current_signed_{false};
   bool enable_offset_calibration_{false};
   bool enable_gain_calibration_{false};
+  bool restored_offset_calibration_{false};
+  bool restored_power_offset_calibration_{false};
+  bool restored_gain_calibration_{false};
+  bool calibration_message_printed_{false};
+  bool offset_calibration_mismatch_[3]{false, false, false};
+  bool power_offset_calibration_mismatch_[3]{false, false, false};
+  bool gain_calibration_mismatch_[3]{false, false, false};
 };
 
 }  // namespace atm90e32

esphome/components/atm90e32/sensor.py

@@ -17,10 +17,12 @@ from esphome.const import (
     CONF_REACTIVE_POWER,
     CONF_REVERSE_ACTIVE_ENERGY,
     CONF_VOLTAGE,
+    DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_TEMPERATURE,
     DEVICE_CLASS_VOLTAGE,
     ENTITY_CATEGORY_DIAGNOSTIC,
@@ -100,13 +102,13 @@ ATM90E32_PHASE_SCHEMA = cv.Schema(
             unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
             icon=ICON_LIGHTBULB,
             accuracy_decimals=2,
-            device_class=DEVICE_CLASS_POWER,
+            device_class=DEVICE_CLASS_REACTIVE_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
         cv.Optional(CONF_APPARENT_POWER): sensor.sensor_schema(
             unit_of_measurement=UNIT_VOLT_AMPS,
             accuracy_decimals=2,
-            device_class=DEVICE_CLASS_POWER,
+            device_class=DEVICE_CLASS_APPARENT_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
         cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(

esphome/components/audio_adc/__init__.py

@@ -2,7 +2,7 @@ from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_MIC_GAIN
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@kbx81"]
 IS_PLATFORM_COMPONENT = True
@@ -35,7 +35,7 @@ async def audio_adc_set_mic_gain_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_define("USE_AUDIO_ADC")
     cg.add_global(audio_adc_ns.using)

esphome/components/audio_dac/__init__.py

@@ -3,7 +3,7 @@ from esphome.automation import maybe_simple_id
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_VOLUME
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@kbx81"]
 IS_PLATFORM_COMPONENT = True
@@ -51,7 +51,7 @@ async def audio_dac_set_volume_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_define("USE_AUDIO_DAC")
     cg.add_global(audio_dac_ns.using)

esphome/components/axs15231/touchscreen/axs15231_touchscreen.cpp

@@ -12,7 +12,7 @@ constexpr static const uint8_t AXS_READ_TOUCHPAD[11] = {0xb5, 0xab, 0xa5, 0x5a,
 
 #define ERROR_CHECK(err) \
   if ((err) != i2c::ERROR_OK) { \
-    this->status_set_warning("Failed to communicate"); \
+    this->status_set_warning(LOG_STR("Failed to communicate")); \
     return; \
   }
 
@@ -41,7 +41,7 @@ void AXS15231Touchscreen::update_touches() {
   i2c::ErrorCode err;
   uint8_t data[8]{};
 
-  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD), false);
+  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD));
   ERROR_CHECK(err);
   err = this->read(data, sizeof(data));
   ERROR_CHECK(err);

esphome/components/bedjet/bedjet_hub.cpp

@@ -493,7 +493,7 @@ void BedJetHub::dump_config() {
                 "  ble_client.app_id: %d\n"
                 "  ble_client.conn_id: %d",
                 this->get_name().c_str(), this->parent()->app_id, this->parent()->get_conn_id());
-  LOG_UPDATE_INTERVAL(this)
+  LOG_UPDATE_INTERVAL(this);
   ESP_LOGCONFIG(TAG, "  Child components (%d):", this->children_.size());
   for (auto *child : this->children_) {
     ESP_LOGCONFIG(TAG, "    - %s", child->describe().c_str());

esphome/components/binary_sensor/__init__.py

@@ -59,7 +59,7 @@ from esphome.const import (
     DEVICE_CLASS_VIBRATION,
     DEVICE_CLASS_WINDOW,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 from esphome.util import Registry
@@ -652,7 +652,7 @@ async def binary_sensor_is_off_to_code(config, condition_id, template_arg, args)
     return cg.new_Pvariable(condition_id, template_arg, paren, False)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(binary_sensor_ns.using)
 

esphome/components/binary_sensor/binary_sensor.cpp

@@ -7,6 +7,19 @@ namespace binary_sensor {
 
 static const char *const TAG = "binary_sensor";
 
+// Function implementation of LOG_BINARY_SENSOR macro to reduce code size
+void log_binary_sensor(const char *tag, const char *prefix, const char *type, BinarySensor *obj) {
+  if (obj == nullptr) {
+    return;
+  }
+
+  ESP_LOGCONFIG(tag, "%s%s '%s'", prefix, type, obj->get_name().c_str());
+
+  if (!obj->get_device_class_ref().empty()) {
+    ESP_LOGCONFIG(tag, "%s  Device Class: '%s'", prefix, obj->get_device_class_ref().c_str());
+  }
+}
+
 void BinarySensor::publish_state(bool new_state) {
   if (this->filter_list_ == nullptr) {
     this->send_state_internal(new_state);

esphome/components/binary_sensor/binary_sensor.h

@@ -10,13 +10,10 @@ namespace esphome {
 
 namespace binary_sensor {
 
-#define LOG_BINARY_SENSOR(prefix, type, obj) \
-  if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_device_class().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Device Class: '%s'", prefix, (obj)->get_device_class().c_str()); \
-    } \
-  }
+class BinarySensor;
+void log_binary_sensor(const char *tag, const char *prefix, const char *type, BinarySensor *obj);
+
+#define LOG_BINARY_SENSOR(prefix, type, obj) log_binary_sensor(TAG, prefix, LOG_STR_LITERAL(type), obj)
 
 #define SUB_BINARY_SENSOR(name) \
  protected: \

esphome/components/bl0940/__init__.py

@@ -1 +1,6 @@
-CODEOWNERS = ["@tobias-"]
+import esphome.codegen as cg
+
+CODEOWNERS = ["@tobias-", "@dan-s-github"]
+
+CONF_BL0940_ID = "bl0940_id"
+bl0940_ns = cg.esphome_ns.namespace("bl0940")

esphome/components/bl0940/bl0940.cpp

@@ -7,28 +7,26 @@ namespace bl0940 {
 
 static const char *const TAG = "bl0940";
 
-static const uint8_t BL0940_READ_COMMAND = 0x50;  // 0x58 according to documentation
 static const uint8_t BL0940_FULL_PACKET = 0xAA;
-static const uint8_t BL0940_PACKET_HEADER = 0x55;  // 0x58 according to documentation
+static const uint8_t BL0940_PACKET_HEADER = 0x55;  // 0x58 according to en doc but 0x55 in cn doc
 
-static const uint8_t BL0940_WRITE_COMMAND = 0xA0;  // 0xA8 according to documentation
 static const uint8_t BL0940_REG_I_FAST_RMS_CTRL = 0x10;
 static const uint8_t BL0940_REG_MODE = 0x18;
 static const uint8_t BL0940_REG_SOFT_RESET = 0x19;
 static const uint8_t BL0940_REG_USR_WRPROT = 0x1A;
 static const uint8_t BL0940_REG_TPS_CTRL = 0x1B;
 
-const uint8_t BL0940_INIT[5][6] = {
+static const uint8_t BL0940_INIT[5][5] = {
     // Reset to default
-    {BL0940_WRITE_COMMAND, BL0940_REG_SOFT_RESET, 0x5A, 0x5A, 0x5A, 0x38},
+    {BL0940_REG_SOFT_RESET, 0x5A, 0x5A, 0x5A, 0x38},
     // Enable User Operation Write
-    {BL0940_WRITE_COMMAND, BL0940_REG_USR_WRPROT, 0x55, 0x00, 0x00, 0xF0},
+    {BL0940_REG_USR_WRPROT, 0x55, 0x00, 0x00, 0xF0},
     // 0x0100 = CF_UNABLE energy pulse, AC_FREQ_SEL 50Hz, RMS_UPDATE_SEL 800mS
-    {BL0940_WRITE_COMMAND, BL0940_REG_MODE, 0x00, 0x10, 0x00, 0x37},
+    {BL0940_REG_MODE, 0x00, 0x10, 0x00, 0x37},
     // 0x47FF = Over-current and leakage alarm on, Automatic temperature measurement, Interval 100mS
-    {BL0940_WRITE_COMMAND, BL0940_REG_TPS_CTRL, 0xFF, 0x47, 0x00, 0xFE},
+    {BL0940_REG_TPS_CTRL, 0xFF, 0x47, 0x00, 0xFE},
     // 0x181C = Half cycle, Fast RMS threshold 6172
-    {BL0940_WRITE_COMMAND, BL0940_REG_I_FAST_RMS_CTRL, 0x1C, 0x18, 0x00, 0x1B}};
+    {BL0940_REG_I_FAST_RMS_CTRL, 0x1C, 0x18, 0x00, 0x1B}};
 
 void BL0940::loop() {
   DataPacket buffer;
@@ -36,8 +34,8 @@ void BL0940::loop() {
     return;
   }
   if (read_array((uint8_t *) &buffer, sizeof(buffer))) {
-    if (validate_checksum(&buffer)) {
-      received_package_(&buffer);
+    if (this->validate_checksum_(&buffer)) {
+      this->received_package_(&buffer);
     }
   } else {
     ESP_LOGW(TAG, "Junk on wire. Throwing away partial message");
@@ -46,35 +44,151 @@ void BL0940::loop() {
   }
 }
 
-bool BL0940::validate_checksum(const DataPacket *data) {
-  uint8_t checksum = BL0940_READ_COMMAND;
+bool BL0940::validate_checksum_(DataPacket *data) {
+  uint8_t checksum = this->read_command_;
   // Whole package but checksum
-  for (uint32_t i = 0; i < sizeof(data->raw) - 1; i++) {
-    checksum += data->raw[i];
+  uint8_t *raw = (uint8_t *) data;
+  for (uint32_t i = 0; i < sizeof(*data) - 1; i++) {
+    checksum += raw[i];
   }
   checksum ^= 0xFF;
   if (checksum != data->checksum) {
-    ESP_LOGW(TAG, "BL0940 invalid checksum! 0x%02X != 0x%02X", checksum, data->checksum);
+    ESP_LOGW(TAG, "Invalid checksum! 0x%02X != 0x%02X", checksum, data->checksum);
   }
   return checksum == data->checksum;
 }
 
 void BL0940::update() {
   this->flush();
-  this->write_byte(BL0940_READ_COMMAND);
+  this->write_byte(this->read_command_);
   this->write_byte(BL0940_FULL_PACKET);
 }
 
 void BL0940::setup() {
+#ifdef USE_NUMBER
+  // add calibration callbacks
+  if (this->voltage_calibration_number_ != nullptr) {
+    this->voltage_calibration_number_->add_on_state_callback(
+        [this](float state) { this->voltage_calibration_callback_(state); });
+    if (this->voltage_calibration_number_->has_state()) {
+      this->voltage_calibration_callback_(this->voltage_calibration_number_->state);
+    }
+  }
+
+  if (this->current_calibration_number_ != nullptr) {
+    this->current_calibration_number_->add_on_state_callback(
+        [this](float state) { this->current_calibration_callback_(state); });
+    if (this->current_calibration_number_->has_state()) {
+      this->current_calibration_callback_(this->current_calibration_number_->state);
+    }
+  }
+
+  if (this->power_calibration_number_ != nullptr) {
+    this->power_calibration_number_->add_on_state_callback(
+        [this](float state) { this->power_calibration_callback_(state); });
+    if (this->power_calibration_number_->has_state()) {
+      this->power_calibration_callback_(this->power_calibration_number_->state);
+    }
+  }
+
+  if (this->energy_calibration_number_ != nullptr) {
+    this->energy_calibration_number_->add_on_state_callback(
+        [this](float state) { this->energy_calibration_callback_(state); });
+    if (this->energy_calibration_number_->has_state()) {
+      this->energy_calibration_callback_(this->energy_calibration_number_->state);
+    }
+  }
+#endif
+
+  // calculate calibrated reference values
+  this->voltage_reference_cal_ = this->voltage_reference_ / this->voltage_cal_;
+  this->current_reference_cal_ = this->current_reference_ / this->current_cal_;
+  this->power_reference_cal_ = this->power_reference_ / this->power_cal_;
+  this->energy_reference_cal_ = this->energy_reference_ / this->energy_cal_;
+
   for (auto *i : BL0940_INIT) {
-    this->write_array(i, 6);
+    this->write_byte(this->write_command_), this->write_array(i, 5);
     delay(1);
   }
   this->flush();
 }
 
-float BL0940::update_temp_(sensor::Sensor *sensor, ube16_t temperature) const {
-  auto tb = (float) (temperature.h << 8 | temperature.l);
+float BL0940::calculate_power_reference_() {
+  // calculate power reference based on voltage and current reference
+  return this->voltage_reference_cal_ * this->current_reference_cal_ * 4046 / 324004 / 79931;
+}
+
+float BL0940::calculate_energy_reference_() {
+  // formula: 3600000 * 4046 * RL * R1 * 1000 / (1638.4 * 256) / Vref² / (R1 + R2)
+  // or:  power_reference_ * 3600000 / (1638.4 * 256)
+  return this->power_reference_cal_ * 3600000 / (1638.4 * 256);
+}
+
+float BL0940::calculate_calibration_value_(float state) { return (100 + state) / 100; }
+
+void BL0940::reset_calibration() {
+#ifdef USE_NUMBER
+  if (this->current_calibration_number_ != nullptr && this->current_cal_ != 1) {
+    this->current_calibration_number_->make_call().set_value(0).perform();
+  }
+  if (this->voltage_calibration_number_ != nullptr && this->voltage_cal_ != 1) {
+    this->voltage_calibration_number_->make_call().set_value(0).perform();
+  }
+  if (this->power_calibration_number_ != nullptr && this->power_cal_ != 1) {
+    this->power_calibration_number_->make_call().set_value(0).perform();
+  }
+  if (this->energy_calibration_number_ != nullptr && this->energy_cal_ != 1) {
+    this->energy_calibration_number_->make_call().set_value(0).perform();
+  }
+#endif
+  ESP_LOGD(TAG, "external calibration values restored to initial state");
+}
+
+void BL0940::current_calibration_callback_(float state) {
+  this->current_cal_ = this->calculate_calibration_value_(state);
+  ESP_LOGV(TAG, "update current calibration state: %f", this->current_cal_);
+  this->recalibrate_();
+}
+void BL0940::voltage_calibration_callback_(float state) {
+  this->voltage_cal_ = this->calculate_calibration_value_(state);
+  ESP_LOGV(TAG, "update voltage calibration state: %f", this->voltage_cal_);
+  this->recalibrate_();
+}
+void BL0940::power_calibration_callback_(float state) {
+  this->power_cal_ = this->calculate_calibration_value_(state);
+  ESP_LOGV(TAG, "update power calibration state: %f", this->power_cal_);
+  this->recalibrate_();
+}
+void BL0940::energy_calibration_callback_(float state) {
+  this->energy_cal_ = this->calculate_calibration_value_(state);
+  ESP_LOGV(TAG, "update energy calibration state: %f", this->energy_cal_);
+  this->recalibrate_();
+}
+
+void BL0940::recalibrate_() {
+  ESP_LOGV(TAG, "Recalibrating reference values");
+  this->voltage_reference_cal_ = this->voltage_reference_ / this->voltage_cal_;
+  this->current_reference_cal_ = this->current_reference_ / this->current_cal_;
+
+  if (this->voltage_cal_ != 1 || this->current_cal_ != 1) {
+    this->power_reference_ = this->calculate_power_reference_();
+  }
+  this->power_reference_cal_ = this->power_reference_ / this->power_cal_;
+
+  if (this->voltage_cal_ != 1 || this->current_cal_ != 1 || this->power_cal_ != 1) {
+    this->energy_reference_ = this->calculate_energy_reference_();
+  }
+  this->energy_reference_cal_ = this->energy_reference_ / this->energy_cal_;
+
+  ESP_LOGD(TAG,
+           "Recalibrated reference values:\n"
+           "Voltage: %f\n, Current: %f\n, Power: %f\n, Energy: %f\n",
+           this->voltage_reference_cal_, this->current_reference_cal_, this->power_reference_cal_,
+           this->energy_reference_cal_);
+}
+
+float BL0940::update_temp_(sensor::Sensor *sensor, uint16_le_t temperature) const {
+  auto tb = (float) temperature;
   float converted_temp = ((float) 170 / 448) * (tb / 2 - 32) - 45;
   if (sensor != nullptr) {
     if (sensor->has_state() && std::abs(converted_temp - sensor->get_state()) > max_temperature_diff_) {
@@ -87,33 +201,40 @@ float BL0940::update_temp_(sensor::Sensor *sensor, ube16_t temperature) const {
   return converted_temp;
 }
 
-void BL0940::received_package_(const DataPacket *data) const {
+void BL0940::received_package_(DataPacket *data) {
   // Bad header
   if (data->frame_header != BL0940_PACKET_HEADER) {
     ESP_LOGI(TAG, "Invalid data. Header mismatch: %d", data->frame_header);
     return;
   }
 
-  float v_rms = (float) to_uint32_t(data->v_rms) / voltage_reference_;
-  float i_rms = (float) to_uint32_t(data->i_rms) / current_reference_;
-  float watt = (float) to_int32_t(data->watt) / power_reference_;
-  uint32_t cf_cnt = to_uint32_t(data->cf_cnt);
-  float total_energy_consumption = (float) cf_cnt / energy_reference_;
+  // cf_cnt is only 24 bits, so track overflows
+  uint32_t cf_cnt = (uint24_t) data->cf_cnt;
+  cf_cnt |= this->prev_cf_cnt_ & 0xff000000;
+  if (cf_cnt < this->prev_cf_cnt_) {
+    cf_cnt += 0x1000000;
+  }
+  this->prev_cf_cnt_ = cf_cnt;
 
-  float tps1 = update_temp_(internal_temperature_sensor_, data->tps1);
-  float tps2 = update_temp_(external_temperature_sensor_, data->tps2);
+  float v_rms = (uint24_t) data->v_rms / this->voltage_reference_cal_;
+  float i_rms = (uint24_t) data->i_rms / this->current_reference_cal_;
+  float watt = (int24_t) data->watt / this->power_reference_cal_;
+  float total_energy_consumption = cf_cnt / this->energy_reference_cal_;
 
-  if (voltage_sensor_ != nullptr) {
-    voltage_sensor_->publish_state(v_rms);
+  float tps1 = update_temp_(this->internal_temperature_sensor_, data->tps1);
+  float tps2 = update_temp_(this->external_temperature_sensor_, data->tps2);
+
+  if (this->voltage_sensor_ != nullptr) {
+    this->voltage_sensor_->publish_state(v_rms);
   }
-  if (current_sensor_ != nullptr) {
-    current_sensor_->publish_state(i_rms);
+  if (this->current_sensor_ != nullptr) {
+    this->current_sensor_->publish_state(i_rms);
   }
-  if (power_sensor_ != nullptr) {
-    power_sensor_->publish_state(watt);
+  if (this->power_sensor_ != nullptr) {
+    this->power_sensor_->publish_state(watt);
   }
-  if (energy_sensor_ != nullptr) {
-    energy_sensor_->publish_state(total_energy_consumption);
+  if (this->energy_sensor_ != nullptr) {
+    this->energy_sensor_->publish_state(total_energy_consumption);
   }
 
   ESP_LOGV(TAG, "BL0940: U %fV, I %fA, P %fW, Cnt %" PRId32 ", ∫P %fkWh, T1 %f°C, T2 %f°C", v_rms, i_rms, watt, cf_cnt,
@@ -121,7 +242,27 @@ void BL0940::received_package_(const DataPacket *data) const {
 }
 
 void BL0940::dump_config() {  // NOLINT(readability-function-cognitive-complexity)
-  ESP_LOGCONFIG(TAG, "BL0940:");
+  ESP_LOGCONFIG(TAG,
+                "BL0940:\n"
+                "  LEGACY MODE: %s\n"
+                "  READ  CMD: 0x%02X\n"
+                "  WRITE CMD: 0x%02X\n"
+                "  ------------------\n"
+                "  Current reference: %f\n"
+                "  Energy reference: %f\n"
+                "  Power reference: %f\n"
+                "  Voltage reference: %f\n",
+                TRUEFALSE(this->legacy_mode_enabled_), this->read_command_, this->write_command_,
+                this->current_reference_, this->energy_reference_, this->power_reference_, this->voltage_reference_);
+#ifdef USE_NUMBER
+  ESP_LOGCONFIG(TAG,
+                "BL0940:\n"
+                "  Current calibration: %f\n"
+                "  Energy calibration: %f\n"
+                "  Power calibration: %f\n"
+                "  Voltage calibration: %f\n",
+                this->current_cal_, this->energy_cal_, this->power_cal_, this->voltage_cal_);
+#endif
   LOG_SENSOR("", "Voltage", this->voltage_sensor_);
   LOG_SENSOR("", "Current", this->current_sensor_);
   LOG_SENSOR("", "Power", this->power_sensor_);
@@ -130,9 +271,5 @@ void BL0940::dump_config() {  // NOLINT(readability-function-cognitive-complexit
   LOG_SENSOR("", "External temperature", this->external_temperature_sensor_);
 }
 
-uint32_t BL0940::to_uint32_t(ube24_t input) { return input.h << 16 | input.m << 8 | input.l; }
-
-int32_t BL0940::to_int32_t(sbe24_t input) { return input.h << 16 | input.m << 8 | input.l; }
-
 }  // namespace bl0940
 }  // namespace esphome

esphome/components/bl0940/bl0940.h

@@ -1,66 +1,48 @@
 #pragma once
 
 #include "esphome/core/component.h"
-#include "esphome/components/uart/uart.h"
+#include "esphome/core/datatypes.h"
+#include "esphome/core/defines.h"
+#ifdef USE_BUTTON
+#include "esphome/components/button/button.h"
+#endif
+#ifdef USE_NUMBER
+#include "esphome/components/number/number.h"
+#endif
 #include "esphome/components/sensor/sensor.h"
+#include "esphome/components/uart/uart.h"
 
 namespace esphome {
 namespace bl0940 {
 
-static const float BL0940_PREF = 1430;
-static const float BL0940_UREF = 33000;
-static const float BL0940_IREF = 275000;  // 2750 from tasmota. Seems to generate values 100 times too high
-
-// Measured to 297J  per click according to power consumption of 5 minutes
-// Converted to kWh (3.6MJ per kwH). Used to be 256 * 1638.4
-static const float BL0940_EREF = 3.6e6 / 297;
-
-struct ube24_t {  // NOLINT(readability-identifier-naming,altera-struct-pack-align)
-  uint8_t l;
-  uint8_t m;
-  uint8_t h;
-} __attribute__((packed));
-
-struct ube16_t {  // NOLINT(readability-identifier-naming,altera-struct-pack-align)
-  uint8_t l;
-  uint8_t h;
-} __attribute__((packed));
-
-struct sbe24_t {  // NOLINT(readability-identifier-naming,altera-struct-pack-align)
-  uint8_t l;
-  uint8_t m;
-  int8_t h;
-} __attribute__((packed));
-
 // Caveat: All these values are big endian (low - middle - high)
-
-union DataPacket {  // NOLINT(altera-struct-pack-align)
-  uint8_t raw[35];
-  struct {
-    uint8_t frame_header;  // value of 0x58 according to docs. 0x55 according to Tasmota real world tests. Reality wins.
-    ube24_t i_fast_rms;    // 0x00
-    ube24_t i_rms;         // 0x04
-    ube24_t RESERVED0;     // reserved
-    ube24_t v_rms;         // 0x06
-    ube24_t RESERVED1;     // reserved
-    sbe24_t watt;          // 0x08
-    ube24_t RESERVED2;     // reserved
-    ube24_t cf_cnt;        // 0x0A
-    ube24_t RESERVED3;     // reserved
-    ube16_t tps1;          // 0x0c
-    uint8_t RESERVED4;     // value of 0x00
-    ube16_t tps2;          // 0x0c
-    uint8_t RESERVED5;     // value of 0x00
-    uint8_t checksum;      // checksum
-  };
+struct DataPacket {
+  uint8_t frame_header;    // Packet header (0x58 in EN docs, 0x55 in CN docs and Tasmota tests)
+  uint24_le_t i_fast_rms;  // Fast RMS current
+  uint24_le_t i_rms;       // RMS current
+  uint24_t RESERVED0;      // Reserved
+  uint24_le_t v_rms;       // RMS voltage
+  uint24_t RESERVED1;      // Reserved
+  int24_le_t watt;         // Active power (can be negative for bidirectional measurement)
+  uint24_t RESERVED2;      // Reserved
+  uint24_le_t cf_cnt;      // Energy pulse count
+  uint24_t RESERVED3;      // Reserved
+  uint16_le_t tps1;        // Internal temperature sensor 1
+  uint8_t RESERVED4;       // Reserved (should be 0x00)
+  uint16_le_t tps2;        // Internal temperature sensor 2
+  uint8_t RESERVED5;       // Reserved (should be 0x00)
+  uint8_t checksum;        // Packet checksum
 } __attribute__((packed));
 
 class BL0940 : public PollingComponent, public uart::UARTDevice {
  public:
+  // Sensor setters
   void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
   void set_current_sensor(sensor::Sensor *current_sensor) { current_sensor_ = current_sensor; }
   void set_power_sensor(sensor::Sensor *power_sensor) { power_sensor_ = power_sensor; }
   void set_energy_sensor(sensor::Sensor *energy_sensor) { energy_sensor_ = energy_sensor; }
+
+  // Temperature sensor setters
   void set_internal_temperature_sensor(sensor::Sensor *internal_temperature_sensor) {
     internal_temperature_sensor_ = internal_temperature_sensor;
   }
@@ -68,42 +50,105 @@ class BL0940 : public PollingComponent, public uart::UARTDevice {
     external_temperature_sensor_ = external_temperature_sensor;
   }
 
-  void loop() override;
+  // Configuration setters
+  void set_legacy_mode(bool enable) { this->legacy_mode_enabled_ = enable; }
+  void set_read_command(uint8_t read_command) { this->read_command_ = read_command; }
+  void set_write_command(uint8_t write_command) { this->write_command_ = write_command; }
 
+  // Reference value setters (used for calibration and conversion)
+  void set_current_reference(float current_ref) { this->current_reference_ = current_ref; }
+  void set_energy_reference(float energy_ref) { this->energy_reference_ = energy_ref; }
+  void set_power_reference(float power_ref) { this->power_reference_ = power_ref; }
+  void set_voltage_reference(float voltage_ref) { this->voltage_reference_ = voltage_ref; }
+
+#ifdef USE_NUMBER
+  // Calibration number setters (for Home Assistant number entities)
+  void set_current_calibration_number(number::Number *num) { this->current_calibration_number_ = num; }
+  void set_voltage_calibration_number(number::Number *num) { this->voltage_calibration_number_ = num; }
+  void set_power_calibration_number(number::Number *num) { this->power_calibration_number_ = num; }
+  void set_energy_calibration_number(number::Number *num) { this->energy_calibration_number_ = num; }
+#endif
+
+#ifdef USE_BUTTON
+  // Resets all calibration values to defaults (can be triggered by a button)
+  void reset_calibration();
+#endif
+
+  // Core component methods
+  void loop() override;
   void update() override;
   void setup() override;
   void dump_config() override;
 
  protected:
-  sensor::Sensor *voltage_sensor_{nullptr};
-  sensor::Sensor *current_sensor_{nullptr};
-  // NB This may be negative as the circuits is seemingly able to measure
-  // power in both directions
-  sensor::Sensor *power_sensor_{nullptr};
-  sensor::Sensor *energy_sensor_{nullptr};
-  sensor::Sensor *internal_temperature_sensor_{nullptr};
-  sensor::Sensor *external_temperature_sensor_{nullptr};
+  // --- Sensor pointers ---
+  sensor::Sensor *voltage_sensor_{nullptr};               // Voltage sensor
+  sensor::Sensor *current_sensor_{nullptr};               // Current sensor
+  sensor::Sensor *power_sensor_{nullptr};                 // Power sensor (can be negative for bidirectional)
+  sensor::Sensor *energy_sensor_{nullptr};                // Energy sensor
+  sensor::Sensor *internal_temperature_sensor_{nullptr};  // Internal temperature sensor
+  sensor::Sensor *external_temperature_sensor_{nullptr};  // External temperature sensor
 
-  // Max difference between two measurements of the temperature. Used to avoid noise.
-  float max_temperature_diff_{0};
-  // Divide by this to turn into Watt
-  float power_reference_ = BL0940_PREF;
-  // Divide by this to turn into Volt
-  float voltage_reference_ = BL0940_UREF;
-  // Divide by this to turn into Ampere
-  float current_reference_ = BL0940_IREF;
-  // Divide by this to turn into kWh
-  float energy_reference_ = BL0940_EREF;
+#ifdef USE_NUMBER
+  // --- Calibration number entities (for dynamic calibration via HA UI) ---
+  number::Number *voltage_calibration_number_{nullptr};
+  number::Number *current_calibration_number_{nullptr};
+  number::Number *power_calibration_number_{nullptr};
+  number::Number *energy_calibration_number_{nullptr};
+#endif
 
-  float update_temp_(sensor::Sensor *sensor, ube16_t packed_temperature) const;
+  // --- Internal state ---
+  uint32_t prev_cf_cnt_ = 0;       // Previous energy pulse count (for energy calculation)
+  float max_temperature_diff_{0};  // Max allowed temperature difference between two measurements (noise filter)
 
-  static uint32_t to_uint32_t(ube24_t input);
+  // --- Reference values for conversion ---
+  float power_reference_;        // Divider for raw power to get Watts
+  float power_reference_cal_;    // Calibrated power reference
+  float voltage_reference_;      // Divider for raw voltage to get Volts
+  float voltage_reference_cal_;  // Calibrated voltage reference
+  float current_reference_;      // Divider for raw current to get Amperes
+  float current_reference_cal_;  // Calibrated current reference
+  float energy_reference_;       // Divider for raw energy to get kWh
+  float energy_reference_cal_;   // Calibrated energy reference
 
-  static int32_t to_int32_t(sbe24_t input);
+  // --- Home Assistant calibration values (multipliers, default 1) ---
+  float current_cal_{1};
+  float voltage_cal_{1};
+  float power_cal_{1};
+  float energy_cal_{1};
 
-  static bool validate_checksum(const DataPacket *data);
+  // --- Protocol commands ---
+  uint8_t read_command_;
+  uint8_t write_command_;
 
-  void received_package_(const DataPacket *data) const;
+  // --- Mode flags ---
+  bool legacy_mode_enabled_ = true;
+
+  // --- Methods ---
+  // Converts packed temperature value to float and updates the sensor
+  float update_temp_(sensor::Sensor *sensor, uint16_le_t packed_temperature) const;
+
+  // Validates the checksum of a received data packet
+  bool validate_checksum_(DataPacket *data);
+
+  // Handles a received data packet
+  void received_package_(DataPacket *data);
+
+  // Calculates reference values for calibration and conversion
+  float calculate_energy_reference_();
+  float calculate_power_reference_();
+  float calculate_calibration_value_(float state);
+
+  // Calibration update callbacks (used with number entities)
+  void current_calibration_callback_(float state);
+  void voltage_calibration_callback_(float state);
+  void power_calibration_callback_(float state);
+  void energy_calibration_callback_(float state);
+  void reset_calibration_callback_();
+
+  // Recalculates all reference values after calibration changes
+  void recalibrate_();
 };
+
 }  // namespace bl0940
 }  // namespace esphome

esphome/components/bl0940/button/__init__.py

@@ -0,0 +1,27 @@
+import esphome.codegen as cg
+from esphome.components import button
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_RESTART
+
+from .. import CONF_BL0940_ID, bl0940_ns
+from ..sensor import BL0940
+
+CalibrationResetButton = bl0940_ns.class_(
+    "CalibrationResetButton", button.Button, cg.Component
+)
+
+CONFIG_SCHEMA = cv.All(
+    button.button_schema(
+        CalibrationResetButton,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+        icon=ICON_RESTART,
+    )
+    .extend({cv.GenerateID(CONF_BL0940_ID): cv.use_id(BL0940)})
+    .extend(cv.COMPONENT_SCHEMA)
+)
+
+
+async def to_code(config):
+    var = await button.new_button(config)
+    await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_BL0940_ID])

esphome/components/bl0940/button/calibration_reset_button.cpp

@@ -0,0 +1,20 @@
+#include "calibration_reset_button.h"
+#include "../bl0940.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+#include "esphome/core/application.h"
+
+namespace esphome {
+namespace bl0940 {
+
+static const char *const TAG = "bl0940.button.calibration_reset";
+
+void CalibrationResetButton::dump_config() { LOG_BUTTON("", "Calibration Reset Button", this); }
+
+void CalibrationResetButton::press_action() {
+  ESP_LOGI(TAG, "Resetting calibration defaults...");
+  this->parent_->reset_calibration();
+}
+
+}  // namespace bl0940
+}  // namespace esphome

esphome/components/bl0940/button/calibration_reset_button.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/button/button.h"
+
+namespace esphome {
+namespace bl0940 {
+
+class BL0940;  // Forward declaration of BL0940 class
+
+class CalibrationResetButton : public button::Button, public Component, public Parented<BL0940> {
+ public:
+  void dump_config() override;
+
+  void press_action() override;
+};
+
+}  // namespace bl0940
+}  // namespace esphome

esphome/components/bl0940/number/__init__.py

@@ -0,0 +1,94 @@
+import esphome.codegen as cg
+from esphome.components import number
+import esphome.config_validation as cv
+from esphome.const import (
+    CONF_MAX_VALUE,
+    CONF_MIN_VALUE,
+    CONF_MODE,
+    CONF_RESTORE_VALUE,
+    CONF_STEP,
+    ENTITY_CATEGORY_CONFIG,
+    UNIT_PERCENT,
+)
+
+from .. import CONF_BL0940_ID, bl0940_ns
+from ..sensor import BL0940
+
+# Define calibration types
+CONF_CURRENT_CALIBRATION = "current_calibration"
+CONF_VOLTAGE_CALIBRATION = "voltage_calibration"
+CONF_POWER_CALIBRATION = "power_calibration"
+CONF_ENERGY_CALIBRATION = "energy_calibration"
+
+BL0940Number = bl0940_ns.class_("BL0940Number")
+
+CalibrationNumber = bl0940_ns.class_(
+    "CalibrationNumber", number.Number, cg.PollingComponent
+)
+
+
+def validate_min_max(config):
+    if config[CONF_MAX_VALUE] <= config[CONF_MIN_VALUE]:
+        raise cv.Invalid("max_value must be greater than min_value")
+    return config
+
+
+CALIBRATION_SCHEMA = cv.All(
+    number.number_schema(
+        CalibrationNumber,
+        entity_category=ENTITY_CATEGORY_CONFIG,
+        unit_of_measurement=UNIT_PERCENT,
+    )
+    .extend(
+        {
+            cv.Optional(CONF_MODE, default="BOX"): cv.enum(number.NUMBER_MODES),
+            cv.Optional(CONF_MAX_VALUE, default=10): cv.All(
+                cv.float_, cv.Range(max=50)
+            ),
+            cv.Optional(CONF_MIN_VALUE, default=-10): cv.All(
+                cv.float_, cv.Range(min=-50)
+            ),
+            cv.Optional(CONF_STEP, default=0.1): cv.positive_float,
+            cv.Optional(CONF_RESTORE_VALUE): cv.boolean,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA),
+    validate_min_max,
+)
+
+# Configuration schema for BL0940 numbers
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(BL0940Number),
+        cv.GenerateID(CONF_BL0940_ID): cv.use_id(BL0940),
+        cv.Optional(CONF_CURRENT_CALIBRATION): CALIBRATION_SCHEMA,
+        cv.Optional(CONF_VOLTAGE_CALIBRATION): CALIBRATION_SCHEMA,
+        cv.Optional(CONF_POWER_CALIBRATION): CALIBRATION_SCHEMA,
+        cv.Optional(CONF_ENERGY_CALIBRATION): CALIBRATION_SCHEMA,
+    }
+)
+
+
+async def to_code(config):
+    # Get the BL0940 component instance
+    bl0940 = await cg.get_variable(config[CONF_BL0940_ID])
+
+    # Process all calibration types
+    for cal_type, setter_method in [
+        (CONF_CURRENT_CALIBRATION, "set_current_calibration_number"),
+        (CONF_VOLTAGE_CALIBRATION, "set_voltage_calibration_number"),
+        (CONF_POWER_CALIBRATION, "set_power_calibration_number"),
+        (CONF_ENERGY_CALIBRATION, "set_energy_calibration_number"),
+    ]:
+        if conf := config.get(cal_type):
+            var = await number.new_number(
+                conf,
+                min_value=conf.get(CONF_MIN_VALUE),
+                max_value=conf.get(CONF_MAX_VALUE),
+                step=conf.get(CONF_STEP),
+            )
+            await cg.register_component(var, conf)
+
+            if restore_value := config.get(CONF_RESTORE_VALUE):
+                cg.add(var.set_restore_value(restore_value))
+            cg.add(getattr(bl0940, setter_method)(var))

esphome/components/bl0940/number/calibration_number.cpp

@@ -0,0 +1,29 @@
+#include "calibration_number.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace bl0940 {
+
+static const char *const TAG = "bl0940.number";
+
+void CalibrationNumber::setup() {
+  float value = 0.0f;
+  if (this->restore_value_) {
+    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    if (!this->pref_.load(&value)) {
+      value = 0.0f;
+    }
+  }
+  this->publish_state(value);
+}
+
+void CalibrationNumber::control(float value) {
+  this->publish_state(value);
+  if (this->restore_value_)
+    this->pref_.save(&value);
+}
+
+void CalibrationNumber::dump_config() { LOG_NUMBER("", "Calibration Number", this); }
+
+}  // namespace bl0940
+}  // namespace esphome

esphome/components/bl0940/number/calibration_number.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "esphome/components/number/number.h"
+#include "esphome/core/component.h"
+#include "esphome/core/preferences.h"
+
+namespace esphome {
+namespace bl0940 {
+
+class CalibrationNumber : public number::Number, public Component {
+ public:
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override { return setup_priority::HARDWARE; }
+
+  void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
+
+ protected:
+  void control(float value) override;
+  bool restore_value_{true};
+
+  ESPPreferenceObject pref_;
+};
+
+}  // namespace bl0940
+}  // namespace esphome

esphome/components/bl0940/sensor.py

@@ -8,6 +8,7 @@ from esphome.const import (
     CONF_ID,
     CONF_INTERNAL_TEMPERATURE,
     CONF_POWER,
+    CONF_REFERENCE_VOLTAGE,
     CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
@@ -23,12 +24,133 @@ from esphome.const import (
     UNIT_WATT,
 )
 
+from . import bl0940_ns
+
 DEPENDENCIES = ["uart"]
 
-
-bl0940_ns = cg.esphome_ns.namespace("bl0940")
 BL0940 = bl0940_ns.class_("BL0940", cg.PollingComponent, uart.UARTDevice)
 
+CONF_LEGACY_MODE = "legacy_mode"
+
+CONF_READ_COMMAND = "read_command"
+CONF_WRITE_COMMAND = "write_command"
+
+CONF_RESISTOR_SHUNT = "resistor_shunt"
+CONF_RESISTOR_ONE = "resistor_one"
+CONF_RESISTOR_TWO = "resistor_two"
+
+CONF_CURRENT_REFERENCE = "current_reference"
+CONF_ENERGY_REFERENCE = "energy_reference"
+CONF_POWER_REFERENCE = "power_reference"
+CONF_VOLTAGE_REFERENCE = "voltage_reference"
+
+DEFAULT_BL0940_READ_COMMAND = 0x58
+DEFAULT_BL0940_WRITE_COMMAND = 0xA1
+
+# Values according to BL0940 application note:
+# https://www.belling.com.cn/media/file_object/bel_product/BL0940/guide/BL0940_APPNote_TSSOP14_V1.04_EN.pdf
+DEFAULT_BL0940_VREF = 1.218  # Vref = 1.218
+DEFAULT_BL0940_RL = 1  # RL = 1 mΩ
+DEFAULT_BL0940_R1 = 0.51  # R1 = 0.51 kΩ
+DEFAULT_BL0940_R2 = 1950  # R2 = 5 x 390 kΩ -> 1950 kΩ
+
+# ----------------------------------------------------
+# values from initial implementation
+DEFAULT_BL0940_LEGACY_READ_COMMAND = 0x50
+DEFAULT_BL0940_LEGACY_WRITE_COMMAND = 0xA0
+
+DEFAULT_BL0940_LEGACY_UREF = 33000
+DEFAULT_BL0940_LEGACY_IREF = 275000
+DEFAULT_BL0940_LEGACY_PREF = 1430
+# Measured to 297J  per click according to power consumption of 5 minutes
+# Converted to kWh (3.6MJ per kwH). Used to be 256 * 1638.4
+DEFAULT_BL0940_LEGACY_EREF = 3.6e6 / 297
+# ----------------------------------------------------
+
+
+# methods to calculate voltage and current reference values
+def calculate_voltage_reference(vref, r_one, r_two):
+    # formula: 79931 / Vref * (R1 * 1000) / (R1 + R2)
+    return 79931 / vref * (r_one * 1000) / (r_one + r_two)
+
+
+def calculate_current_reference(vref, r_shunt):
+    # formula: 324004 * RL / Vref
+    return 324004 * r_shunt / vref
+
+
+def calculate_power_reference(voltage_reference, current_reference):
+    # calculate power reference based on voltage and current reference
+    return voltage_reference * current_reference * 4046 / 324004 / 79931
+
+
+def calculate_energy_reference(power_reference):
+    # formula: power_reference * 3600000 / (1638.4 * 256)
+    return power_reference * 3600000 / (1638.4 * 256)
+
+
+def validate_legacy_mode(config):
+    # Only allow schematic calibration options if legacy_mode is False
+    if config.get(CONF_LEGACY_MODE, True):
+        forbidden = [
+            CONF_REFERENCE_VOLTAGE,
+            CONF_RESISTOR_SHUNT,
+            CONF_RESISTOR_ONE,
+            CONF_RESISTOR_TWO,
+        ]
+        for key in forbidden:
+            if key in config:
+                raise cv.Invalid(
+                    f"Option '{key}' is only allowed when legacy_mode: false"
+                )
+    return config
+
+
+def set_command_defaults(config):
+    # Set defaults for read_command and write_command based on legacy_mode
+    legacy = config.get(CONF_LEGACY_MODE, True)
+    if legacy:
+        config.setdefault(CONF_READ_COMMAND, DEFAULT_BL0940_LEGACY_READ_COMMAND)
+        config.setdefault(CONF_WRITE_COMMAND, DEFAULT_BL0940_LEGACY_WRITE_COMMAND)
+    else:
+        config.setdefault(CONF_READ_COMMAND, DEFAULT_BL0940_READ_COMMAND)
+        config.setdefault(CONF_WRITE_COMMAND, DEFAULT_BL0940_WRITE_COMMAND)
+    return config
+
+
+def set_reference_values(config):
+    # Set default reference values based on legacy_mode
+    if config.get(CONF_LEGACY_MODE, True):
+        config.setdefault(CONF_VOLTAGE_REFERENCE, DEFAULT_BL0940_LEGACY_UREF)
+        config.setdefault(CONF_CURRENT_REFERENCE, DEFAULT_BL0940_LEGACY_IREF)
+        config.setdefault(CONF_POWER_REFERENCE, DEFAULT_BL0940_LEGACY_PREF)
+        config.setdefault(CONF_ENERGY_REFERENCE, DEFAULT_BL0940_LEGACY_PREF)
+    else:
+        vref = config.get(CONF_VOLTAGE_REFERENCE, DEFAULT_BL0940_VREF)
+        r_one = config.get(CONF_RESISTOR_ONE, DEFAULT_BL0940_R1)
+        r_two = config.get(CONF_RESISTOR_TWO, DEFAULT_BL0940_R2)
+        r_shunt = config.get(CONF_RESISTOR_SHUNT, DEFAULT_BL0940_RL)
+
+        config.setdefault(
+            CONF_VOLTAGE_REFERENCE, calculate_voltage_reference(vref, r_one, r_two)
+        )
+        config.setdefault(
+            CONF_CURRENT_REFERENCE, calculate_current_reference(vref, r_shunt)
+        )
+        config.setdefault(
+            CONF_POWER_REFERENCE,
+            calculate_power_reference(
+                config.get(CONF_VOLTAGE_REFERENCE), config.get(CONF_CURRENT_REFERENCE)
+            ),
+        )
+        config.setdefault(
+            CONF_ENERGY_REFERENCE,
+            calculate_energy_reference(config.get(CONF_POWER_REFERENCE)),
+        )
+
+    return config
+
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {
@@ -69,10 +191,24 @@ CONFIG_SCHEMA = (
                 device_class=DEVICE_CLASS_TEMPERATURE,
                 state_class=STATE_CLASS_MEASUREMENT,
             ),
+            cv.Optional(CONF_LEGACY_MODE, default=True): cv.boolean,
+            cv.Optional(CONF_READ_COMMAND): cv.hex_uint8_t,
+            cv.Optional(CONF_WRITE_COMMAND): cv.hex_uint8_t,
+            cv.Optional(CONF_REFERENCE_VOLTAGE): cv.float_,
+            cv.Optional(CONF_RESISTOR_SHUNT): cv.float_,
+            cv.Optional(CONF_RESISTOR_ONE): cv.float_,
+            cv.Optional(CONF_RESISTOR_TWO): cv.float_,
+            cv.Optional(CONF_CURRENT_REFERENCE): cv.float_,
+            cv.Optional(CONF_ENERGY_REFERENCE): cv.float_,
+            cv.Optional(CONF_POWER_REFERENCE): cv.float_,
+            cv.Optional(CONF_VOLTAGE_REFERENCE): cv.float_,
         }
     )
     .extend(cv.polling_component_schema("60s"))
     .extend(uart.UART_DEVICE_SCHEMA)
+    .add_extra(validate_legacy_mode)
+    .add_extra(set_command_defaults)
+    .add_extra(set_reference_values)
 )
 
 
@@ -99,3 +235,16 @@ async def to_code(config):
     if external_temperature_config := config.get(CONF_EXTERNAL_TEMPERATURE):
         sens = await sensor.new_sensor(external_temperature_config)
         cg.add(var.set_external_temperature_sensor(sens))
+
+    # enable legacy mode
+    cg.add(var.set_legacy_mode(config.get(CONF_LEGACY_MODE)))
+
+    # Set bl0940 commands after validator has determined which defaults to use if not set
+    cg.add(var.set_read_command(config.get(CONF_READ_COMMAND)))
+    cg.add(var.set_write_command(config.get(CONF_WRITE_COMMAND)))
+
+    # Set reference values after validator has set the values either from defaults or calculated
+    cg.add(var.set_current_reference(config.get(CONF_CURRENT_REFERENCE)))
+    cg.add(var.set_voltage_reference(config.get(CONF_VOLTAGE_REFERENCE)))
+    cg.add(var.set_power_reference(config.get(CONF_POWER_REFERENCE)))
+    cg.add(var.set_energy_reference(config.get(CONF_ENERGY_REFERENCE)))

esphome/components/bl0942/bl0942.cpp

@@ -149,7 +149,7 @@ void BL0942::setup() {
   this->write_reg_(BL0942_REG_USR_WRPROT, 0);
 
   if (this->read_reg_(BL0942_REG_MODE) != mode)
-    this->status_set_warning("BL0942 setup failed!");
+    this->status_set_warning(LOG_STR("BL0942 setup failed!"));
 
   this->flush();
 }

esphome/components/ble_client/__init__.py

@@ -286,6 +286,7 @@ async def remove_bond_to_code(config, action_id, template_arg, args):
 async def to_code(config):
     # Register the loggers this component needs
     esp32_ble.register_bt_logger(BTLoggers.GATT, BTLoggers.SMP)
+    cg.add_define("USE_ESP32_BLE_UUID")
 
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/ble_client/output/__init__.py

@@ -27,7 +27,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     if len(config[CONF_SERVICE_UUID]) == len(esp32_ble_tracker.bt_uuid16_format):
         cg.add(
@@ -63,6 +63,6 @@ def to_code(config):
         )
         cg.add(var.set_char_uuid128(uuid128))
     cg.add(var.set_require_response(config[CONF_REQUIRE_RESPONSE]))
-    yield output.register_output(var, config)
-    yield ble_client.register_ble_node(var, config)
-    yield cg.register_component(var, config)
+    await output.register_output(var, config)
+    await ble_client.register_ble_node(var, config)
+    await cg.register_component(var, config)

esphome/components/bluetooth_proxy/__init__.py

@@ -80,7 +80,7 @@ CONFIG_SCHEMA = cv.All(
         cv.Schema(
             {
                 cv.GenerateID(): cv.declare_id(BluetoothProxy),
-                cv.Optional(CONF_ACTIVE, default=False): cv.boolean,
+                cv.Optional(CONF_ACTIVE, default=True): cv.boolean,
                 cv.SplitDefault(CONF_CACHE_SERVICES, esp32_idf=True): cv.All(
                     cv.only_with_esp_idf, cv.boolean
                 ),
@@ -118,6 +118,12 @@ async def to_code(config):
     connection_count = len(config.get(CONF_CONNECTIONS, []))
     cg.add_define("BLUETOOTH_PROXY_MAX_CONNECTIONS", connection_count)
 
+    # Define batch size for BLE advertisements
+    # Each advertisement is up to 80 bytes when packaged (including protocol overhead)
+    # 16 advertisements × 80 bytes (worst case) = 1280 bytes out of ~1320 bytes usable payload
+    # This achieves ~97% WiFi MTU utilization while staying under the limit
+    cg.add_define("BLUETOOTH_PROXY_ADVERTISEMENT_BATCH_SIZE", 16)
+
     for connection_conf in config.get(CONF_CONNECTIONS, []):
         connection_var = cg.new_Pvariable(connection_conf[CONF_ID])
         await cg.register_component(connection_var, connection_conf)

esphome/components/bluetooth_proxy/bluetooth_connection.cpp

@@ -12,16 +12,30 @@ namespace esphome::bluetooth_proxy {
 
 static const char *const TAG = "bluetooth_proxy.connection";
 
+// This function is allocation-free and directly packs UUIDs into the output array
+// using precalculated constants for the Bluetooth base UUID
 static void fill_128bit_uuid_array(std::array<uint64_t, 2> &out, esp_bt_uuid_t uuid_source) {
-  esp_bt_uuid_t uuid = espbt::ESPBTUUID::from_uuid(uuid_source).as_128bit().get_uuid();
-  out[0] = ((uint64_t) uuid.uuid.uuid128[15] << 56) | ((uint64_t) uuid.uuid.uuid128[14] << 48) |
-           ((uint64_t) uuid.uuid.uuid128[13] << 40) | ((uint64_t) uuid.uuid.uuid128[12] << 32) |
-           ((uint64_t) uuid.uuid.uuid128[11] << 24) | ((uint64_t) uuid.uuid.uuid128[10] << 16) |
-           ((uint64_t) uuid.uuid.uuid128[9] << 8) | ((uint64_t) uuid.uuid.uuid128[8]);
-  out[1] = ((uint64_t) uuid.uuid.uuid128[7] << 56) | ((uint64_t) uuid.uuid.uuid128[6] << 48) |
-           ((uint64_t) uuid.uuid.uuid128[5] << 40) | ((uint64_t) uuid.uuid.uuid128[4] << 32) |
-           ((uint64_t) uuid.uuid.uuid128[3] << 24) | ((uint64_t) uuid.uuid.uuid128[2] << 16) |
-           ((uint64_t) uuid.uuid.uuid128[1] << 8) | ((uint64_t) uuid.uuid.uuid128[0]);
+  // Bluetooth base UUID: 00000000-0000-1000-8000-00805F9B34FB
+  // out[0] = bytes 8-15 (big-endian)
+  // - For 128-bit UUIDs: use bytes 8-15 as-is
+  // - For 16/32-bit UUIDs: insert into bytes 12-15, use 0x00001000 for bytes 8-11
+  out[0] = uuid_source.len == ESP_UUID_LEN_128
+               ? (((uint64_t) uuid_source.uuid.uuid128[15] << 56) | ((uint64_t) uuid_source.uuid.uuid128[14] << 48) |
+                  ((uint64_t) uuid_source.uuid.uuid128[13] << 40) | ((uint64_t) uuid_source.uuid.uuid128[12] << 32) |
+                  ((uint64_t) uuid_source.uuid.uuid128[11] << 24) | ((uint64_t) uuid_source.uuid.uuid128[10] << 16) |
+                  ((uint64_t) uuid_source.uuid.uuid128[9] << 8) | ((uint64_t) uuid_source.uuid.uuid128[8]))
+               : (((uint64_t) (uuid_source.len == ESP_UUID_LEN_16 ? uuid_source.uuid.uuid16 : uuid_source.uuid.uuid32)
+                   << 32) |
+                  0x00001000ULL);  // Base UUID bytes 8-11
+  // out[1] = bytes 0-7 (big-endian)
+  // - For 128-bit UUIDs: use bytes 0-7 as-is
+  // - For 16/32-bit UUIDs: use precalculated base UUID constant
+  out[1] = uuid_source.len == ESP_UUID_LEN_128
+               ? ((uint64_t) uuid_source.uuid.uuid128[7] << 56) | ((uint64_t) uuid_source.uuid.uuid128[6] << 48) |
+                     ((uint64_t) uuid_source.uuid.uuid128[5] << 40) | ((uint64_t) uuid_source.uuid.uuid128[4] << 32) |
+                     ((uint64_t) uuid_source.uuid.uuid128[3] << 24) | ((uint64_t) uuid_source.uuid.uuid128[2] << 16) |
+                     ((uint64_t) uuid_source.uuid.uuid128[1] << 8) | ((uint64_t) uuid_source.uuid.uuid128[0])
+               : 0x800000805F9B34FBULL;  // Base UUID bytes 0-7: 80-00-00-80-5F-9B-34-FB
 }
 
 // Helper to fill UUID in the appropriate format based on client support and UUID type
@@ -80,9 +94,11 @@ void BluetoothConnection::dump_config() {
 
 void BluetoothConnection::update_allocated_slot_(uint64_t find_value, uint64_t set_value) {
   auto &allocated = this->proxy_->connections_free_response_.allocated;
-  auto *it = std::find(allocated.begin(), allocated.end(), find_value);
-  if (it != allocated.end()) {
-    *it = set_value;
+  for (auto &slot : allocated) {
+    if (slot == find_value) {
+      slot = set_value;
+      return;
+    }
   }
 }
 
@@ -105,13 +121,24 @@ void BluetoothConnection::set_address(uint64_t address) {
 void BluetoothConnection::loop() {
   BLEClientBase::loop();
 
-  // Early return if no active connection or not in service discovery phase
-  if (this->address_ == 0 || this->send_service_ < 0 || this->send_service_ > this->service_count_) {
+  // Early return if no active connection
+  if (this->address_ == 0) {
     return;
   }
 
-  // Handle service discovery
-  this->send_service_for_discovery_();
+  // Handle service discovery if in valid range
+  if (this->send_service_ >= 0 && this->send_service_ <= this->service_count_) {
+    this->send_service_for_discovery_();
+  }
+
+  // Check if we should disable the loop
+  // - For V3_WITH_CACHE: Services are never sent, disable after INIT state
+  // - For V3_WITHOUT_CACHE: Disable only after service discovery is complete
+  //   (send_service_ == DONE_SENDING_SERVICES, which is only set after services are sent)
+  if (this->state_ != espbt::ClientState::INIT && (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
+                                                   this->send_service_ == DONE_SENDING_SERVICES)) {
+    this->disable_loop();
+  }
 }
 
 void BluetoothConnection::reset_connection_(esp_err_t reason) {
@@ -125,7 +152,7 @@ void BluetoothConnection::reset_connection_(esp_err_t reason) {
   // to detect incomplete service discovery rather than relying on us to
   // tell them about a partial list.
   this->set_address(0);
-  this->send_service_ = DONE_SENDING_SERVICES;
+  this->send_service_ = INIT_SENDING_SERVICES;
   this->proxy_->send_connections_free();
 }
 
@@ -133,10 +160,7 @@ void BluetoothConnection::send_service_for_discovery_() {
   if (this->send_service_ >= this->service_count_) {
     this->send_service_ = DONE_SENDING_SERVICES;
     this->proxy_->send_gatt_services_done(this->address_);
-    if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
-        this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
-      this->release_services();
-    }
+    this->release_services();
     return;
   }
 
@@ -185,8 +209,7 @@ void BluetoothConnection::send_service_for_discovery_() {
                                      service_result.start_handle, service_result.end_handle, 0, &total_char_count);
 
     if (char_count_status != ESP_GATT_OK) {
-      ESP_LOGE(TAG, "[%d] [%s] Error getting characteristic count, status=%d", this->connection_index_,
-               this->address_str().c_str(), char_count_status);
+      this->log_connection_error_("esp_ble_gattc_get_attr_count", char_count_status);
       this->send_service_ = DONE_SENDING_SERVICES;
       return;
     }
@@ -220,8 +243,7 @@ void BluetoothConnection::send_service_for_discovery_() {
           break;
         }
         if (char_status != ESP_GATT_OK) {
-          ESP_LOGE(TAG, "[%d] [%s] esp_ble_gattc_get_all_char error, status=%d", this->connection_index_,
-                   this->address_str().c_str(), char_status);
+          this->log_connection_error_("esp_ble_gattc_get_all_char", char_status);
           this->send_service_ = DONE_SENDING_SERVICES;
           return;
         }
@@ -244,8 +266,7 @@ void BluetoothConnection::send_service_for_discovery_() {
             this->gattc_if_, this->conn_id_, ESP_GATT_DB_DESCRIPTOR, 0, 0, char_result.char_handle, &total_desc_count);
 
         if (desc_count_status != ESP_GATT_OK) {
-          ESP_LOGE(TAG, "[%d] [%s] Error getting descriptor count for char handle %d, status=%d",
-                   this->connection_index_, this->address_str().c_str(), char_result.char_handle, desc_count_status);
+          this->log_connection_error_("esp_ble_gattc_get_attr_count", desc_count_status);
           this->send_service_ = DONE_SENDING_SERVICES;
           return;
         }
@@ -266,8 +287,7 @@ void BluetoothConnection::send_service_for_discovery_() {
             break;
           }
           if (desc_status != ESP_GATT_OK) {
-            ESP_LOGE(TAG, "[%d] [%s] esp_ble_gattc_get_all_descr error, status=%d", this->connection_index_,
-                     this->address_str().c_str(), desc_status);
+            this->log_connection_error_("esp_ble_gattc_get_all_descr", desc_status);
             this->send_service_ = DONE_SENDING_SERVICES;
             return;
           }
@@ -321,6 +341,33 @@ void BluetoothConnection::send_service_for_discovery_() {
   api_conn->send_message(resp, api::BluetoothGATTGetServicesResponse::MESSAGE_TYPE);
 }
 
+void BluetoothConnection::log_connection_error_(const char *operation, esp_gatt_status_t status) {
+  ESP_LOGE(TAG, "[%d] [%s] %s error, status=%d", this->connection_index_, this->address_str().c_str(), operation,
+           status);
+}
+
+void BluetoothConnection::log_connection_warning_(const char *operation, esp_err_t err) {
+  ESP_LOGW(TAG, "[%d] [%s] %s failed, err=%d", this->connection_index_, this->address_str().c_str(), operation, err);
+}
+
+void BluetoothConnection::log_gatt_not_connected_(const char *action, const char *type) {
+  ESP_LOGW(TAG, "[%d] [%s] Cannot %s GATT %s, not connected.", this->connection_index_, this->address_str().c_str(),
+           action, type);
+}
+
+void BluetoothConnection::log_gatt_operation_error_(const char *operation, uint16_t handle, esp_gatt_status_t status) {
+  ESP_LOGW(TAG, "[%d] [%s] Error %s for handle 0x%2X, status=%d", this->connection_index_, this->address_str().c_str(),
+           operation, handle, status);
+}
+
+esp_err_t BluetoothConnection::check_and_log_error_(const char *operation, esp_err_t err) {
+  if (err != ESP_OK) {
+    this->log_connection_warning_(operation, err);
+    return err;
+  }
+  return ESP_OK;
+}
+
 bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
                                               esp_ble_gattc_cb_param_t *param) {
   if (!BLEClientBase::gattc_event_handler(event, gattc_if, param))
@@ -328,10 +375,19 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
 
   switch (event) {
     case ESP_GATTC_DISCONNECT_EVT: {
-      this->reset_connection_(param->disconnect.reason);
+      // Don't reset connection yet - wait for CLOSE_EVT to ensure controller has freed resources
+      // This prevents race condition where we mark slot as free before controller cleanup is complete
+      ESP_LOGD(TAG, "[%d] [%s] Disconnect, reason=0x%02x", this->connection_index_, this->address_str_.c_str(),
+               param->disconnect.reason);
+      // Send disconnection notification but don't free the slot yet
+      this->proxy_->send_device_connection(this->address_, false, 0, param->disconnect.reason);
       break;
     }
     case ESP_GATTC_CLOSE_EVT: {
+      ESP_LOGD(TAG, "[%d] [%s] Close, reason=0x%02x, freeing slot", this->connection_index_, this->address_str_.c_str(),
+               param->close.reason);
+      // Now the GATT connection is fully closed and controller resources are freed
+      // Safe to mark the connection slot as available
       this->reset_connection_(param->close.reason);
       break;
     }
@@ -361,8 +417,7 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
     case ESP_GATTC_READ_DESCR_EVT:
     case ESP_GATTC_READ_CHAR_EVT: {
       if (param->read.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "[%d] [%s] Error reading char/descriptor at handle 0x%2X, status=%d", this->connection_index_,
-                 this->address_str_.c_str(), param->read.handle, param->read.status);
+        this->log_gatt_operation_error_("reading char/descriptor", param->read.handle, param->read.status);
         this->proxy_->send_gatt_error(this->address_, param->read.handle, param->read.status);
         break;
       }
@@ -376,8 +431,7 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
     case ESP_GATTC_WRITE_CHAR_EVT:
     case ESP_GATTC_WRITE_DESCR_EVT: {
       if (param->write.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "[%d] [%s] Error writing char/descriptor at handle 0x%2X, status=%d", this->connection_index_,
-                 this->address_str_.c_str(), param->write.handle, param->write.status);
+        this->log_gatt_operation_error_("writing char/descriptor", param->write.handle, param->write.status);
         this->proxy_->send_gatt_error(this->address_, param->write.handle, param->write.status);
         break;
       }
@@ -389,9 +443,8 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
     }
     case ESP_GATTC_UNREG_FOR_NOTIFY_EVT: {
       if (param->unreg_for_notify.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "[%d] [%s] Error unregistering notifications for handle 0x%2X, status=%d",
-                 this->connection_index_, this->address_str_.c_str(), param->unreg_for_notify.handle,
-                 param->unreg_for_notify.status);
+        this->log_gatt_operation_error_("unregistering notifications", param->unreg_for_notify.handle,
+                                        param->unreg_for_notify.status);
         this->proxy_->send_gatt_error(this->address_, param->unreg_for_notify.handle, param->unreg_for_notify.status);
         break;
       }
@@ -403,8 +456,8 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
       if (param->reg_for_notify.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "[%d] [%s] Error registering notifications for handle 0x%2X, status=%d", this->connection_index_,
-                 this->address_str_.c_str(), param->reg_for_notify.handle, param->reg_for_notify.status);
+        this->log_gatt_operation_error_("registering notifications", param->reg_for_notify.handle,
+                                        param->reg_for_notify.status);
         this->proxy_->send_gatt_error(this->address_, param->reg_for_notify.handle, param->reg_for_notify.status);
         break;
       }
@@ -450,8 +503,7 @@ void BluetoothConnection::gap_event_handler(esp_gap_ble_cb_event_t event, esp_bl
 
 esp_err_t BluetoothConnection::read_characteristic(uint16_t handle) {
   if (!this->connected()) {
-    ESP_LOGW(TAG, "[%d] [%s] Cannot read GATT characteristic, not connected.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_gatt_not_connected_("read", "characteristic");
     return ESP_GATT_NOT_CONNECTED;
   }
 
@@ -459,18 +511,12 @@ esp_err_t BluetoothConnection::read_characteristic(uint16_t handle) {
            handle);
 
   esp_err_t err = esp_ble_gattc_read_char(this->gattc_if_, this->conn_id_, handle, ESP_GATT_AUTH_REQ_NONE);
-  if (err != ERR_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_read_char error, err=%d", this->connection_index_,
-             this->address_str_.c_str(), err);
-    return err;
-  }
-  return ESP_OK;
+  return this->check_and_log_error_("esp_ble_gattc_read_char", err);
 }
 
 esp_err_t BluetoothConnection::write_characteristic(uint16_t handle, const std::string &data, bool response) {
   if (!this->connected()) {
-    ESP_LOGW(TAG, "[%d] [%s] Cannot write GATT characteristic, not connected.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_gatt_not_connected_("write", "characteristic");
     return ESP_GATT_NOT_CONNECTED;
   }
   ESP_LOGV(TAG, "[%d] [%s] Writing GATT characteristic handle %d", this->connection_index_, this->address_str_.c_str(),
@@ -479,36 +525,24 @@ esp_err_t BluetoothConnection::write_characteristic(uint16_t handle, const std::
   esp_err_t err =
       esp_ble_gattc_write_char(this->gattc_if_, this->conn_id_, handle, data.size(), (uint8_t *) data.data(),
                                response ? ESP_GATT_WRITE_TYPE_RSP : ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-  if (err != ERR_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_write_char error, err=%d", this->connection_index_,
-             this->address_str_.c_str(), err);
-    return err;
-  }
-  return ESP_OK;
+  return this->check_and_log_error_("esp_ble_gattc_write_char", err);
 }
 
 esp_err_t BluetoothConnection::read_descriptor(uint16_t handle) {
   if (!this->connected()) {
-    ESP_LOGW(TAG, "[%d] [%s] Cannot read GATT descriptor, not connected.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_gatt_not_connected_("read", "descriptor");
     return ESP_GATT_NOT_CONNECTED;
   }
   ESP_LOGV(TAG, "[%d] [%s] Reading GATT descriptor handle %d", this->connection_index_, this->address_str_.c_str(),
            handle);
 
   esp_err_t err = esp_ble_gattc_read_char_descr(this->gattc_if_, this->conn_id_, handle, ESP_GATT_AUTH_REQ_NONE);
-  if (err != ERR_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_read_char_descr error, err=%d", this->connection_index_,
-             this->address_str_.c_str(), err);
-    return err;
-  }
-  return ESP_OK;
+  return this->check_and_log_error_("esp_ble_gattc_read_char_descr", err);
 }
 
 esp_err_t BluetoothConnection::write_descriptor(uint16_t handle, const std::string &data, bool response) {
   if (!this->connected()) {
-    ESP_LOGW(TAG, "[%d] [%s] Cannot write GATT descriptor, not connected.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_gatt_not_connected_("write", "descriptor");
     return ESP_GATT_NOT_CONNECTED;
   }
   ESP_LOGV(TAG, "[%d] [%s] Writing GATT descriptor handle %d", this->connection_index_, this->address_str_.c_str(),
@@ -517,18 +551,12 @@ esp_err_t BluetoothConnection::write_descriptor(uint16_t handle, const std::stri
   esp_err_t err = esp_ble_gattc_write_char_descr(
       this->gattc_if_, this->conn_id_, handle, data.size(), (uint8_t *) data.data(),
       response ? ESP_GATT_WRITE_TYPE_RSP : ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-  if (err != ERR_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_write_char_descr error, err=%d", this->connection_index_,
-             this->address_str_.c_str(), err);
-    return err;
-  }
-  return ESP_OK;
+  return this->check_and_log_error_("esp_ble_gattc_write_char_descr", err);
 }
 
 esp_err_t BluetoothConnection::notify_characteristic(uint16_t handle, bool enable) {
   if (!this->connected()) {
-    ESP_LOGW(TAG, "[%d] [%s] Cannot notify GATT characteristic, not connected.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_gatt_not_connected_("notify", "characteristic");
     return ESP_GATT_NOT_CONNECTED;
   }
 
@@ -536,22 +564,13 @@ esp_err_t BluetoothConnection::notify_characteristic(uint16_t handle, bool enabl
     ESP_LOGV(TAG, "[%d] [%s] Registering for GATT characteristic notifications handle %d", this->connection_index_,
              this->address_str_.c_str(), handle);
     esp_err_t err = esp_ble_gattc_register_for_notify(this->gattc_if_, this->remote_bda_, handle);
-    if (err != ESP_OK) {
-      ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_register_for_notify failed, err=%d", this->connection_index_,
-               this->address_str_.c_str(), err);
-      return err;
-    }
-  } else {
-    ESP_LOGV(TAG, "[%d] [%s] Unregistering for GATT characteristic notifications handle %d", this->connection_index_,
-             this->address_str_.c_str(), handle);
-    esp_err_t err = esp_ble_gattc_unregister_for_notify(this->gattc_if_, this->remote_bda_, handle);
-    if (err != ESP_OK) {
-      ESP_LOGW(TAG, "[%d] [%s] esp_ble_gattc_unregister_for_notify failed, err=%d", this->connection_index_,
-               this->address_str_.c_str(), err);
-      return err;
-    }
+    return this->check_and_log_error_("esp_ble_gattc_register_for_notify", err);
   }
-  return ESP_OK;
+
+  ESP_LOGV(TAG, "[%d] [%s] Unregistering for GATT characteristic notifications handle %d", this->connection_index_,
+           this->address_str_.c_str(), handle);
+  esp_err_t err = esp_ble_gattc_unregister_for_notify(this->gattc_if_, this->remote_bda_, handle);
+  return this->check_and_log_error_("esp_ble_gattc_unregister_for_notify", err);
 }
 
 esp32_ble_tracker::AdvertisementParserType BluetoothConnection::get_advertisement_parser_type() {

esphome/components/bluetooth_proxy/bluetooth_connection.h

@@ -8,7 +8,7 @@ namespace esphome::bluetooth_proxy {
 
 class BluetoothProxy;
 
-class BluetoothConnection : public esp32_ble_client::BLEClientBase {
+class BluetoothConnection final : public esp32_ble_client::BLEClientBase {
  public:
   void dump_config() override;
   void loop() override;
@@ -33,13 +33,18 @@ class BluetoothConnection : public esp32_ble_client::BLEClientBase {
   void send_service_for_discovery_();
   void reset_connection_(esp_err_t reason);
   void update_allocated_slot_(uint64_t find_value, uint64_t set_value);
+  void log_connection_error_(const char *operation, esp_gatt_status_t status);
+  void log_connection_warning_(const char *operation, esp_err_t err);
+  void log_gatt_not_connected_(const char *action, const char *type);
+  void log_gatt_operation_error_(const char *operation, uint16_t handle, esp_gatt_status_t status);
+  esp_err_t check_and_log_error_(const char *operation, esp_err_t err);
 
   // Memory optimized layout for 32-bit systems
   // Group 1: Pointers (4 bytes each, naturally aligned)
   BluetoothProxy *proxy_;
 
   // Group 2: 2-byte types
-  int16_t send_service_{-2};  // Needs to handle negative values and service count
+  int16_t send_service_{-3};  // -3 = INIT_SENDING_SERVICES, -2 = DONE_SENDING_SERVICES, >=0 = service index
 
   // Group 3: 1-byte types
   bool seen_mtu_or_services_{false};

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -11,12 +11,8 @@ namespace esphome::bluetooth_proxy {
 
 static const char *const TAG = "bluetooth_proxy";
 
-// Batch size for BLE advertisements to maximize WiFi efficiency
-// Each advertisement is up to 80 bytes when packaged (including protocol overhead)
-// Most advertisements are 20-30 bytes, allowing even more to fit per packet
-// 16 advertisements × 80 bytes (worst case) = 1280 bytes out of ~1320 bytes usable payload
-// This achieves ~97% WiFi MTU utilization while staying under the limit
-static constexpr size_t FLUSH_BATCH_SIZE = 16;
+// BLUETOOTH_PROXY_ADVERTISEMENT_BATCH_SIZE is defined during code generation
+// It sets the batch size for BLE advertisements to maximize WiFi efficiency
 
 // Verify BLE advertisement data array size matches the BLE specification (31 bytes adv + 31 bytes scan response)
 static_assert(sizeof(((api::BluetoothLERawAdvertisement *) nullptr)->data) == 62,
@@ -25,19 +21,12 @@ static_assert(sizeof(((api::BluetoothLERawAdvertisement *) nullptr)->data) == 62
 BluetoothProxy::BluetoothProxy() { global_bluetooth_proxy = this; }
 
 void BluetoothProxy::setup() {
-  // Pre-allocate response object
-  this->response_ = std::make_unique<api::BluetoothLERawAdvertisementsResponse>();
-
-  // Reserve capacity but start with size 0
-  // Reserve 50% since we'll grow naturally and flush at FLUSH_BATCH_SIZE
-  this->response_->advertisements.reserve(FLUSH_BATCH_SIZE / 2);
-
-  // Don't pre-allocate pool - let it grow only if needed in busy environments
-  // Many devices in quiet areas will never need the overflow pool
-
   this->connections_free_response_.limit = BLUETOOTH_PROXY_MAX_CONNECTIONS;
   this->connections_free_response_.free = BLUETOOTH_PROXY_MAX_CONNECTIONS;
 
+  // Capture the configured scan mode from YAML before any API changes
+  this->configured_scan_active_ = this->parent_->get_scan_active();
+
   this->parent_->add_scanner_state_callback([this](esp32_ble_tracker::ScannerState state) {
     if (this->api_connection_ != nullptr) {
       this->send_bluetooth_scanner_state_(state);
@@ -50,9 +39,32 @@ void BluetoothProxy::send_bluetooth_scanner_state_(esp32_ble_tracker::ScannerSta
   resp.state = static_cast<api::enums::BluetoothScannerState>(state);
   resp.mode = this->parent_->get_scan_active() ? api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_ACTIVE
                                                : api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_PASSIVE;
+  resp.configured_mode = this->configured_scan_active_
+                             ? api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_ACTIVE
+                             : api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_PASSIVE;
   this->api_connection_->send_message(resp, api::BluetoothScannerStateResponse::MESSAGE_TYPE);
 }
 
+void BluetoothProxy::log_connection_request_ignored_(BluetoothConnection *connection, espbt::ClientState state) {
+  ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, state: %s", connection->get_connection_index(),
+           connection->address_str().c_str(), espbt::client_state_to_string(state));
+}
+
+void BluetoothProxy::log_connection_info_(BluetoothConnection *connection, const char *message) {
+  ESP_LOGI(TAG, "[%d] [%s] Connecting %s", connection->get_connection_index(), connection->address_str().c_str(),
+           message);
+}
+
+void BluetoothProxy::log_not_connected_gatt_(const char *action, const char *type) {
+  ESP_LOGW(TAG, "Cannot %s GATT %s, not connected", action, type);
+}
+
+void BluetoothProxy::handle_gatt_not_connected_(uint64_t address, uint16_t handle, const char *action,
+                                                const char *type) {
+  this->log_not_connected_gatt_(action, type);
+  this->send_gatt_error(address, handle, ESP_GATT_NOT_CONNECTED);
+}
+
 #ifdef USE_ESP32_BLE_DEVICE
 bool BluetoothProxy::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
   // This method should never be called since bluetooth_proxy always uses raw advertisements
@@ -65,39 +77,27 @@ bool BluetoothProxy::parse_devices(const esp32_ble::BLEScanResult *scan_results,
   if (!api::global_api_server->is_connected() || this->api_connection_ == nullptr)
     return false;
 
-  auto &advertisements = this->response_->advertisements;
+  auto &advertisements = this->response_.advertisements;
 
   for (size_t i = 0; i < count; i++) {
     auto &result = scan_results[i];
     uint8_t length = result.adv_data_len + result.scan_rsp_len;
 
-    // Check if we need to expand the vector
-    if (this->advertisement_count_ >= advertisements.size()) {
-      if (this->advertisement_pool_.empty()) {
-        // No room in pool, need to allocate
-        advertisements.emplace_back();
-      } else {
-        // Pull from pool
-        advertisements.push_back(std::move(this->advertisement_pool_.back()));
-        this->advertisement_pool_.pop_back();
-      }
-    }
-
     // Fill in the data directly at current position
-    auto &adv = advertisements[this->advertisement_count_];
+    auto &adv = advertisements[this->response_.advertisements_len];
     adv.address = esp32_ble::ble_addr_to_uint64(result.bda);
     adv.rssi = result.rssi;
     adv.address_type = result.ble_addr_type;
     adv.data_len = length;
     std::memcpy(adv.data, result.ble_adv, length);
 
-    this->advertisement_count_++;
+    this->response_.advertisements_len++;
 
     ESP_LOGV(TAG, "Queuing raw packet from %02X:%02X:%02X:%02X:%02X:%02X, length %d. RSSI: %d dB", result.bda[0],
              result.bda[1], result.bda[2], result.bda[3], result.bda[4], result.bda[5], length, result.rssi);
 
-    // Flush if we have reached FLUSH_BATCH_SIZE
-    if (this->advertisement_count_ >= FLUSH_BATCH_SIZE) {
+    // Flush if we have reached BLUETOOTH_PROXY_ADVERTISEMENT_BATCH_SIZE
+    if (this->response_.advertisements_len >= BLUETOOTH_PROXY_ADVERTISEMENT_BATCH_SIZE) {
       this->flush_pending_advertisements();
     }
   }
@@ -106,32 +106,22 @@ bool BluetoothProxy::parse_devices(const esp32_ble::BLEScanResult *scan_results,
 }
 
 void BluetoothProxy::flush_pending_advertisements() {
-  if (this->advertisement_count_ == 0 || !api::global_api_server->is_connected() || this->api_connection_ == nullptr)
+  if (this->response_.advertisements_len == 0 || !api::global_api_server->is_connected() ||
+      this->api_connection_ == nullptr)
     return;
 
-  auto &advertisements = this->response_->advertisements;
-
-  // Return any items beyond advertisement_count_ to the pool
-  if (advertisements.size() > this->advertisement_count_) {
-    // Move unused items back to pool
-    this->advertisement_pool_.insert(this->advertisement_pool_.end(),
-                                     std::make_move_iterator(advertisements.begin() + this->advertisement_count_),
-                                     std::make_move_iterator(advertisements.end()));
-
-    // Resize to actual count
-    advertisements.resize(this->advertisement_count_);
-  }
-
   // Send the message
-  this->api_connection_->send_message(*this->response_, api::BluetoothLERawAdvertisementsResponse::MESSAGE_TYPE);
+  this->api_connection_->send_message(this->response_, api::BluetoothLERawAdvertisementsResponse::MESSAGE_TYPE);
 
-  // Reset count - existing items will be overwritten in next batch
-  this->advertisement_count_ = 0;
+  ESP_LOGV(TAG, "Sent batch of %u BLE advertisements", this->response_.advertisements_len);
+
+  // Reset the length for the next batch
+  this->response_.advertisements_len = 0;
 }
 
 void BluetoothProxy::dump_config() {
-  ESP_LOGCONFIG(TAG, "Bluetooth Proxy:");
   ESP_LOGCONFIG(TAG,
+                "Bluetooth Proxy:\n"
                 "  Active: %s\n"
                 "  Connections: %d",
                 YESNO(this->active_), this->connection_count_);
@@ -175,7 +165,7 @@ BluetoothConnection *BluetoothProxy::get_connection_(uint64_t address, bool rese
   for (uint8_t i = 0; i < this->connection_count_; i++) {
     auto *connection = this->connections_[i];
     if (connection->get_address() == 0) {
-      connection->send_service_ = DONE_SENDING_SERVICES;
+      connection->send_service_ = INIT_SENDING_SERVICES;
       connection->set_address(address);
       // All connections must start at INIT
       // We only set the state if we allocate the connection
@@ -192,33 +182,25 @@ BluetoothConnection *BluetoothProxy::get_connection_(uint64_t address, bool rese
 void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest &msg) {
   switch (msg.request_type) {
     case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITH_CACHE:
-    case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITHOUT_CACHE:
-    case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT: {
+    case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITHOUT_CACHE: {
       auto *connection = this->get_connection_(msg.address, true);
       if (connection == nullptr) {
         ESP_LOGW(TAG, "No free connections available");
         this->send_device_connection(msg.address, false);
         return;
       }
+      if (!msg.has_address_type) {
+        ESP_LOGE(TAG, "[%d] [%s] Missing address type in connect request", connection->get_connection_index(),
+                 connection->address_str().c_str());
+        this->send_device_connection(msg.address, false);
+        return;
+      }
       if (connection->state() == espbt::ClientState::CONNECTED ||
           connection->state() == espbt::ClientState::ESTABLISHED) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection already established", connection->get_connection_index(),
-                 connection->address_str().c_str());
+        this->log_connection_request_ignored_(connection, connection->state());
         this->send_device_connection(msg.address, true);
         this->send_connections_free();
         return;
-      } else if (connection->state() == espbt::ClientState::SEARCHING) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, already searching for device",
-                 connection->get_connection_index(), connection->address_str().c_str());
-        return;
-      } else if (connection->state() == espbt::ClientState::DISCOVERED) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, device already discovered",
-                 connection->get_connection_index(), connection->address_str().c_str());
-        return;
-      } else if (connection->state() == espbt::ClientState::READY_TO_CONNECT) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, waiting in line to connect",
-                 connection->get_connection_index(), connection->address_str().c_str());
-        return;
       } else if (connection->state() == espbt::ClientState::CONNECTING) {
         if (connection->disconnect_pending()) {
           ESP_LOGW(TAG, "[%d] [%s] Connection request while pending disconnect, cancelling pending disconnect",
@@ -226,37 +208,22 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
           connection->cancel_pending_disconnect();
           return;
         }
-        ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, already connecting", connection->get_connection_index(),
-                 connection->address_str().c_str());
-        return;
-      } else if (connection->state() == espbt::ClientState::DISCONNECTING) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection request ignored, device is disconnecting",
-                 connection->get_connection_index(), connection->address_str().c_str());
+        this->log_connection_request_ignored_(connection, connection->state());
         return;
       } else if (connection->state() != espbt::ClientState::INIT) {
-        ESP_LOGW(TAG, "[%d] [%s] Connection already in progress", connection->get_connection_index(),
-                 connection->address_str().c_str());
+        this->log_connection_request_ignored_(connection, connection->state());
         return;
       }
       if (msg.request_type == api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITH_CACHE) {
         connection->set_connection_type(espbt::ConnectionType::V3_WITH_CACHE);
-        ESP_LOGI(TAG, "[%d] [%s] Connecting v3 with cache", connection->get_connection_index(),
-                 connection->address_str().c_str());
-      } else if (msg.request_type == api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITHOUT_CACHE) {
+        this->log_connection_info_(connection, "v3 with cache");
+      } else {  // BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT_V3_WITHOUT_CACHE
         connection->set_connection_type(espbt::ConnectionType::V3_WITHOUT_CACHE);
-        ESP_LOGI(TAG, "[%d] [%s] Connecting v3 without cache", connection->get_connection_index(),
-                 connection->address_str().c_str());
-      } else {
-        connection->set_connection_type(espbt::ConnectionType::V1);
-        ESP_LOGI(TAG, "[%d] [%s] Connecting v1", connection->get_connection_index(), connection->address_str().c_str());
-      }
-      if (msg.has_address_type) {
-        uint64_to_bd_addr(msg.address, connection->remote_bda_);
-        connection->set_remote_addr_type(static_cast<esp_ble_addr_type_t>(msg.address_type));
-        connection->set_state(espbt::ClientState::DISCOVERED);
-      } else {
-        connection->set_state(espbt::ClientState::SEARCHING);
+        this->log_connection_info_(connection, "v3 without cache");
       }
+      uint64_to_bd_addr(msg.address, connection->remote_bda_);
+      connection->set_remote_addr_type(static_cast<esp_ble_addr_type_t>(msg.address_type));
+      connection->set_state(espbt::ClientState::DISCOVERED);
       this->send_connections_free();
       break;
     }
@@ -310,14 +277,18 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
 
       break;
     }
+    case api::enums::BLUETOOTH_DEVICE_REQUEST_TYPE_CONNECT: {
+      ESP_LOGE(TAG, "V1 connections removed");
+      this->send_device_connection(msg.address, false);
+      break;
+    }
   }
 }
 
 void BluetoothProxy::bluetooth_gatt_read(const api::BluetoothGATTReadRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
-    ESP_LOGW(TAG, "Cannot read GATT characteristic, not connected");
-    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, msg.handle, "read", "characteristic");
     return;
   }
 
@@ -330,8 +301,7 @@ void BluetoothProxy::bluetooth_gatt_read(const api::BluetoothGATTReadRequest &ms
 void BluetoothProxy::bluetooth_gatt_write(const api::BluetoothGATTWriteRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
-    ESP_LOGW(TAG, "Cannot write GATT characteristic, not connected");
-    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, msg.handle, "write", "characteristic");
     return;
   }
 
@@ -344,8 +314,7 @@ void BluetoothProxy::bluetooth_gatt_write(const api::BluetoothGATTWriteRequest &
 void BluetoothProxy::bluetooth_gatt_read_descriptor(const api::BluetoothGATTReadDescriptorRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
-    ESP_LOGW(TAG, "Cannot read GATT descriptor, not connected");
-    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, msg.handle, "read", "descriptor");
     return;
   }
 
@@ -358,8 +327,7 @@ void BluetoothProxy::bluetooth_gatt_read_descriptor(const api::BluetoothGATTRead
 void BluetoothProxy::bluetooth_gatt_write_descriptor(const api::BluetoothGATTWriteDescriptorRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
-    ESP_LOGW(TAG, "Cannot write GATT descriptor, not connected");
-    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, msg.handle, "write", "descriptor");
     return;
   }
 
@@ -372,8 +340,7 @@ void BluetoothProxy::bluetooth_gatt_write_descriptor(const api::BluetoothGATTWri
 void BluetoothProxy::bluetooth_gatt_send_services(const api::BluetoothGATTGetServicesRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr || !connection->connected()) {
-    ESP_LOGW(TAG, "Cannot get GATT services, not connected");
-    this->send_gatt_error(msg.address, 0, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, 0, "get", "services");
     return;
   }
   if (!connection->service_count_) {
@@ -381,16 +348,14 @@ void BluetoothProxy::bluetooth_gatt_send_services(const api::BluetoothGATTGetSer
     this->send_gatt_services_done(msg.address);
     return;
   }
-  if (connection->send_service_ ==
-      DONE_SENDING_SERVICES)  // Only start sending services if we're not already sending them
+  if (connection->send_service_ == INIT_SENDING_SERVICES)  // Start sending services if not started yet
     connection->send_service_ = 0;
 }
 
 void BluetoothProxy::bluetooth_gatt_notify(const api::BluetoothGATTNotifyRequest &msg) {
   auto *connection = this->get_connection_(msg.address, false);
   if (connection == nullptr) {
-    ESP_LOGW(TAG, "Cannot notify GATT characteristic, not connected");
-    this->send_gatt_error(msg.address, msg.handle, ESP_GATT_NOT_CONNECTED);
+    this->handle_gatt_not_connected_(msg.address, msg.handle, "notify", "characteristic");
     return;
   }
 

esphome/components/bluetooth_proxy/bluetooth_proxy.h

@@ -23,6 +23,7 @@ namespace esphome::bluetooth_proxy {
 
 static const esp_err_t ESP_GATT_NOT_CONNECTED = -1;
 static const int DONE_SENDING_SERVICES = -2;
+static const int INIT_SENDING_SERVICES = -3;
 
 using namespace esp32_ble_client;
 
@@ -49,7 +50,7 @@ enum BluetoothProxySubscriptionFlag : uint32_t {
   SUBSCRIPTION_RAW_ADVERTISEMENTS = 1 << 0,
 };
 
-class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Component {
+class BluetoothProxy final : public esp32_ble_tracker::ESPBTDeviceListener, public Component {
   friend class BluetoothConnection;  // Allow connection to update connections_free_response_
  public:
   BluetoothProxy();
@@ -129,13 +130,19 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
 
   std::string get_bluetooth_mac_address_pretty() {
     const uint8_t *mac = esp_bt_dev_get_address();
-    return str_snprintf("%02X:%02X:%02X:%02X:%02X:%02X", 17, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+    char buf[18];
+    format_mac_addr_upper(mac, buf);
+    return std::string(buf);
   }
 
  protected:
   void send_bluetooth_scanner_state_(esp32_ble_tracker::ScannerState state);
 
   BluetoothConnection *get_connection_(uint64_t address, bool reserve);
+  void log_connection_request_ignored_(BluetoothConnection *connection, espbt::ClientState state);
+  void log_connection_info_(BluetoothConnection *connection, const char *message);
+  void log_not_connected_gatt_(const char *action, const char *type);
+  void handle_gatt_not_connected_(uint64_t address, uint16_t handle, const char *action, const char *type);
 
   // Memory optimized layout for 32-bit systems
   // Group 1: Pointers (4 bytes each, naturally aligned)
@@ -145,8 +152,7 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
   std::array<BluetoothConnection *, BLUETOOTH_PROXY_MAX_CONNECTIONS> connections_{};
 
   // BLE advertisement batching
-  std::vector<api::BluetoothLERawAdvertisement> advertisement_pool_;
-  std::unique_ptr<api::BluetoothLERawAdvertisementsResponse> response_;
+  api::BluetoothLERawAdvertisementsResponse response_;
 
   // Group 3: 4-byte types
   uint32_t last_advertisement_flush_time_{0};
@@ -156,8 +162,8 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
 
   // Group 4: 1-byte types grouped together
   bool active_;
-  uint8_t advertisement_count_{0};
   uint8_t connection_count_{0};
+  bool configured_scan_active_{false};  // Configured scan mode from YAML
   // 3 bytes used, 1 byte padding
 };
 

esphome/components/bme280_base/bme280_base.cpp

@@ -7,6 +7,8 @@
 #include <esphome/components/sensor/sensor.h>
 #include <esphome/core/component.h>
 
+#define BME280_ERROR_WRONG_CHIP_ID "Wrong chip ID"
+
 namespace esphome {
 namespace bme280_base {
 
@@ -98,18 +100,18 @@ void BME280Component::setup() {
 
   if (!this->read_byte(BME280_REGISTER_CHIPID, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   if (chip_id != 0x60) {
     this->error_code_ = WRONG_CHIP_ID;
-    this->mark_failed();
+    this->mark_failed(BME280_ERROR_WRONG_CHIP_ID);
     return;
   }
 
   // Send a soft reset.
   if (!this->write_byte(BME280_REGISTER_RESET, BME280_SOFT_RESET)) {
-    this->mark_failed();
+    this->mark_failed("Reset failed");
     return;
   }
   // Wait until the NVM data has finished loading.
@@ -118,14 +120,12 @@ void BME280Component::setup() {
   do {  // NOLINT
     delay(2);
     if (!this->read_byte(BME280_REGISTER_STATUS, &status)) {
-      ESP_LOGW(TAG, "Error reading status register.");
-      this->mark_failed();
+      this->mark_failed("Error reading status register");
       return;
     }
   } while ((status & BME280_STATUS_IM_UPDATE) && (--retry));
   if (status & BME280_STATUS_IM_UPDATE) {
-    ESP_LOGW(TAG, "Timeout loading NVM.");
-    this->mark_failed();
+    this->mark_failed("Timeout loading NVM");
     return;
   }
 
@@ -153,26 +153,26 @@ void BME280Component::setup() {
 
   uint8_t humid_control_val = 0;
   if (!this->read_byte(BME280_REGISTER_CONTROLHUMID, &humid_control_val)) {
-    this->mark_failed();
+    this->mark_failed("Read humidity control");
     return;
   }
   humid_control_val &= ~0b00000111;
   humid_control_val |= this->humidity_oversampling_ & 0b111;
   if (!this->write_byte(BME280_REGISTER_CONTROLHUMID, humid_control_val)) {
-    this->mark_failed();
+    this->mark_failed("Write humidity control");
     return;
   }
 
   uint8_t config_register = 0;
   if (!this->read_byte(BME280_REGISTER_CONFIG, &config_register)) {
-    this->mark_failed();
+    this->mark_failed("Read config");
     return;
   }
   config_register &= ~0b11111100;
   config_register |= 0b101 << 5;  // 1000 ms standby time
   config_register |= (this->iir_filter_ & 0b111) << 2;
   if (!this->write_byte(BME280_REGISTER_CONFIG, config_register)) {
-    this->mark_failed();
+    this->mark_failed("Write config");
     return;
   }
 }
@@ -183,7 +183,7 @@ void BME280Component::dump_config() {
       ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
-      ESP_LOGE(TAG, "BME280 has wrong chip ID! Is it a BME280?");
+      ESP_LOGE(TAG, BME280_ERROR_WRONG_CHIP_ID);
       break;
     case NONE:
     default:
@@ -223,21 +223,21 @@ void BME280Component::update() {
   this->set_timeout("data", uint32_t(ceilf(meas_time)), [this]() {
     uint8_t data[8];
     if (!this->read_bytes(BME280_REGISTER_MEASUREMENTS, data, 8)) {
-      ESP_LOGW(TAG, "Error reading registers.");
+      ESP_LOGW(TAG, "Error reading registers");
       this->status_set_warning();
       return;
     }
     int32_t t_fine = 0;
     float const temperature = this->read_temperature_(data, &t_fine);
     if (std::isnan(temperature)) {
-      ESP_LOGW(TAG, "Invalid temperature, cannot read pressure & humidity values.");
+      ESP_LOGW(TAG, "Invalid temperature");
       this->status_set_warning();
       return;
     }
     float const pressure = this->read_pressure_(data, t_fine);
     float const humidity = this->read_humidity_(data, t_fine);
 
-    ESP_LOGV(TAG, "Got temperature=%.1f°C pressure=%.1fhPa humidity=%.1f%%", temperature, pressure, humidity);
+    ESP_LOGV(TAG, "Temperature=%.1f°C Pressure=%.1fhPa Humidity=%.1f%%", temperature, pressure, humidity);
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(temperature);
     if (this->pressure_sensor_ != nullptr)

esphome/components/bme680/bme680.cpp

@@ -28,7 +28,7 @@ const float BME680_GAS_LOOKUP_TABLE_1[16] PROGMEM = {0.0, 0.0, 0.0,  0.0,  0.0,
 const float BME680_GAS_LOOKUP_TABLE_2[16] PROGMEM = {0.0,  0.0, 0.0, 0.0, 0.1, 0.7, 0.0, -0.8,
                                                      -0.1, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
 
-static const char *oversampling_to_str(BME680Oversampling oversampling) {
+[[maybe_unused]] static const char *oversampling_to_str(BME680Oversampling oversampling) {
   switch (oversampling) {
     case BME680_OVERSAMPLING_NONE:
       return "None";
@@ -47,7 +47,7 @@ static const char *oversampling_to_str(BME680Oversampling oversampling) {
   }
 }
 
-static const char *iir_filter_to_str(BME680IIRFilter filter) {
+[[maybe_unused]] static const char *iir_filter_to_str(BME680IIRFilter filter) {
   switch (filter) {
     case BME680_IIR_FILTER_OFF:
       return "OFF";

esphome/components/bmi160/bmi160.cpp

@@ -203,7 +203,7 @@ void BMI160Component::dump_config() {
 i2c::ErrorCode BMI160Component::read_le_int16_(uint8_t reg, int16_t *value, uint8_t len) {
   uint8_t raw_data[len * 2];
   // read using read_register because we have little-endian data, and read_bytes_16 will swap it
-  i2c::ErrorCode err = this->read_register(reg, raw_data, len * 2, true);
+  i2c::ErrorCode err = this->read_register(reg, raw_data, len * 2);
   if (err != i2c::ERROR_OK) {
     return err;
   }

esphome/components/bmp280_base/bmp280_base.cpp

@@ -2,6 +2,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/log.h"
 
+#define BMP280_ERROR_WRONG_CHIP_ID "Wrong chip ID"
+
 namespace esphome {
 namespace bmp280_base {
 
@@ -61,25 +63,25 @@ void BMP280Component::setup() {
 
   // Read the chip id twice, to work around a bug where the first read is 0.
   // https://community.st.com/t5/stm32-mcus-products/issue-with-reading-bmp280-chip-id-using-spi/td-p/691855
-  if (!this->read_byte(0xD0, &chip_id)) {
+  if (!this->bmp_read_byte(0xD0, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
-  if (!this->read_byte(0xD0, &chip_id)) {
+  if (!this->bmp_read_byte(0xD0, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   if (chip_id != 0x58) {
     this->error_code_ = WRONG_CHIP_ID;
-    this->mark_failed();
+    this->mark_failed(BMP280_ERROR_WRONG_CHIP_ID);
     return;
   }
 
   // Send a soft reset.
-  if (!this->write_byte(BMP280_REGISTER_RESET, BMP280_SOFT_RESET)) {
-    this->mark_failed();
+  if (!this->bmp_write_byte(BMP280_REGISTER_RESET, BMP280_SOFT_RESET)) {
+    this->mark_failed("Reset failed");
     return;
   }
   // Wait until the NVM data has finished loading.
@@ -87,15 +89,13 @@ void BMP280Component::setup() {
   uint8_t retry = 5;
   do {
     delay(2);
-    if (!this->read_byte(BMP280_REGISTER_STATUS, &status)) {
-      ESP_LOGW(TAG, "Error reading status register.");
-      this->mark_failed();
+    if (!this->bmp_read_byte(BMP280_REGISTER_STATUS, &status)) {
+      this->mark_failed("Error reading status register");
       return;
     }
   } while ((status & BMP280_STATUS_IM_UPDATE) && (--retry));
   if (status & BMP280_STATUS_IM_UPDATE) {
-    ESP_LOGW(TAG, "Timeout loading NVM.");
-    this->mark_failed();
+    this->mark_failed("Timeout loading NVM");
     return;
   }
 
@@ -115,15 +115,15 @@ void BMP280Component::setup() {
   this->calibration_.p9 = this->read_s16_le_(0x9E);
 
   uint8_t config_register = 0;
-  if (!this->read_byte(BMP280_REGISTER_CONFIG, &config_register)) {
-    this->mark_failed();
+  if (!this->bmp_read_byte(BMP280_REGISTER_CONFIG, &config_register)) {
+    this->mark_failed("Read config");
     return;
   }
   config_register &= ~0b11111100;
   config_register |= 0b000 << 5;  // 0.5 ms standby time
   config_register |= (this->iir_filter_ & 0b111) << 2;
-  if (!this->write_byte(BMP280_REGISTER_CONFIG, config_register)) {
-    this->mark_failed();
+  if (!this->bmp_write_byte(BMP280_REGISTER_CONFIG, config_register)) {
+    this->mark_failed("Write config");
     return;
   }
 }
@@ -134,7 +134,7 @@ void BMP280Component::dump_config() {
       ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
-      ESP_LOGE(TAG, "BMP280 has wrong chip ID! Is it a BME280?");
+      ESP_LOGE(TAG, BMP280_ERROR_WRONG_CHIP_ID);
       break;
     case NONE:
     default:
@@ -159,7 +159,7 @@ void BMP280Component::update() {
   meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
   meas_value |= (this->pressure_oversampling_ & 0b111) << 2;
   meas_value |= 0b01;  // Forced mode
-  if (!this->write_byte(BMP280_REGISTER_CONTROL, meas_value)) {
+  if (!this->bmp_write_byte(BMP280_REGISTER_CONTROL, meas_value)) {
     this->status_set_warning();
     return;
   }
@@ -172,13 +172,13 @@ void BMP280Component::update() {
     int32_t t_fine = 0;
     float temperature = this->read_temperature_(&t_fine);
     if (std::isnan(temperature)) {
-      ESP_LOGW(TAG, "Invalid temperature, cannot read pressure values.");
+      ESP_LOGW(TAG, "Invalid temperature");
       this->status_set_warning();
       return;
     }
     float pressure = this->read_pressure_(t_fine);
 
-    ESP_LOGD(TAG, "Got temperature=%.1f°C pressure=%.1fhPa", temperature, pressure);
+    ESP_LOGV(TAG, "Temperature=%.1f°C Pressure=%.1fhPa", temperature, pressure);
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(temperature);
     if (this->pressure_sensor_ != nullptr)
@@ -188,9 +188,10 @@ void BMP280Component::update() {
 }
 
 float BMP280Component::read_temperature_(int32_t *t_fine) {
-  uint8_t data[3];
-  if (!this->read_bytes(BMP280_REGISTER_TEMPDATA, data, 3))
+  uint8_t data[3]{};
+  if (!this->bmp_read_bytes(BMP280_REGISTER_TEMPDATA, data, 3))
     return NAN;
+  ESP_LOGV(TAG, "Read temperature data, raw: %02X %02X %02X", data[0], data[1], data[2]);
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
   if (adc == 0x80000) {
@@ -212,7 +213,7 @@ float BMP280Component::read_temperature_(int32_t *t_fine) {
 
 float BMP280Component::read_pressure_(int32_t t_fine) {
   uint8_t data[3];
-  if (!this->read_bytes(BMP280_REGISTER_PRESSUREDATA, data, 3))
+  if (!this->bmp_read_bytes(BMP280_REGISTER_PRESSUREDATA, data, 3))
     return NAN;
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
@@ -258,12 +259,12 @@ void BMP280Component::set_pressure_oversampling(BMP280Oversampling pressure_over
 void BMP280Component::set_iir_filter(BMP280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 uint8_t BMP280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
-  this->read_byte(a_register, &data);
+  this->bmp_read_byte(a_register, &data);
   return data;
 }
 uint16_t BMP280Component::read_u16_le_(uint8_t a_register) {
   uint16_t data = 0;
-  this->read_byte_16(a_register, &data);
+  this->bmp_read_byte_16(a_register, &data);
   return (data >> 8) | (data << 8);
 }
 int16_t BMP280Component::read_s16_le_(uint8_t a_register) { return this->read_u16_le_(a_register); }

esphome/components/bmp280_base/bmp280_base.h

@@ -67,12 +67,12 @@ class BMP280Component : public PollingComponent {
   float get_setup_priority() const override;
   void update() override;
 
-  virtual bool read_byte(uint8_t a_register, uint8_t *data) = 0;
-  virtual bool write_byte(uint8_t a_register, uint8_t data) = 0;
-  virtual bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) = 0;
-  virtual bool read_byte_16(uint8_t a_register, uint16_t *data) = 0;
-
  protected:
+  virtual bool bmp_read_byte(uint8_t a_register, uint8_t *data) = 0;
+  virtual bool bmp_write_byte(uint8_t a_register, uint8_t data) = 0;
+  virtual bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) = 0;
+  virtual bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) = 0;
+
   /// Read the temperature value and store the calculated ambient temperature in t_fine.
   float read_temperature_(int32_t *t_fine);
   /// Read the pressure value in hPa using the provided t_fine value.

esphome/components/bmp280_i2c/bmp280_i2c.cpp

@@ -5,19 +5,6 @@
 namespace esphome {
 namespace bmp280_i2c {
 
-bool BMP280I2CComponent::read_byte(uint8_t a_register, uint8_t *data) {
-  return I2CDevice::read_byte(a_register, data);
-};
-bool BMP280I2CComponent::write_byte(uint8_t a_register, uint8_t data) {
-  return I2CDevice::write_byte(a_register, data);
-};
-bool BMP280I2CComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
-  return I2CDevice::read_bytes(a_register, data, len);
-};
-bool BMP280I2CComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
-  return I2CDevice::read_byte_16(a_register, data);
-};
-
 void BMP280I2CComponent::dump_config() {
   LOG_I2C_DEVICE(this);
   BMP280Component::dump_config();

esphome/components/bmp280_i2c/bmp280_i2c.h

@@ -11,10 +11,12 @@ static const char *const TAG = "bmp280_i2c.sensor";
 /// This class implements support for the BMP280 Temperature+Pressure i2c sensor.
 class BMP280I2CComponent : public esphome::bmp280_base::BMP280Component, public i2c::I2CDevice {
  public:
-  bool read_byte(uint8_t a_register, uint8_t *data) override;
-  bool write_byte(uint8_t a_register, uint8_t data) override;
-  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
-  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+  bool bmp_read_byte(uint8_t a_register, uint8_t *data) override { return read_byte(a_register, data); }
+  bool bmp_write_byte(uint8_t a_register, uint8_t data) override { return write_byte(a_register, data); }
+  bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) override {
+    return read_bytes(a_register, data, len);
+  }
+  bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) override { return read_byte_16(a_register, data); }
   void dump_config() override;
 };
 

esphome/components/bmp280_spi/bmp280_spi.cpp

@@ -28,7 +28,7 @@ void BMP280SPIComponent::setup() {
 // 0x77 is transferred, for read access, the byte 0xF7 is transferred.
 // https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
 
-bool BMP280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
+bool BMP280SPIComponent::bmp_read_byte(uint8_t a_register, uint8_t *data) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   *data = this->transfer_byte(0);
@@ -36,7 +36,7 @@ bool BMP280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
   return true;
 }
 
-bool BMP280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
+bool BMP280SPIComponent::bmp_write_byte(uint8_t a_register, uint8_t data) {
   this->enable();
   this->transfer_byte(clear_bit(a_register, 7));
   this->transfer_byte(data);
@@ -44,7 +44,7 @@ bool BMP280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
   return true;
 }
 
-bool BMP280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
+bool BMP280SPIComponent::bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   this->read_array(data, len);
@@ -52,7 +52,7 @@ bool BMP280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t le
   return true;
 }
 
-bool BMP280SPIComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
+bool BMP280SPIComponent::bmp_read_byte_16(uint8_t a_register, uint16_t *data) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   ((uint8_t *) data)[1] = this->transfer_byte(0);

esphome/components/bmp280_spi/bmp280_spi.h

@@ -10,10 +10,10 @@ class BMP280SPIComponent : public esphome::bmp280_base::BMP280Component,
                            public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
                                                  spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_200KHZ> {
   void setup() override;
-  bool read_byte(uint8_t a_register, uint8_t *data) override;
-  bool write_byte(uint8_t a_register, uint8_t data) override;
-  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
-  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+  bool bmp_read_byte(uint8_t a_register, uint8_t *data) override;
+  bool bmp_write_byte(uint8_t a_register, uint8_t data) override;
+  bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
+  bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) override;
 };
 
 }  // namespace bmp280_spi

esphome/components/button/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     DEVICE_CLASS_RESTART,
     DEVICE_CLASS_UPDATE,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -134,6 +134,6 @@ async def button_press_to_code(config, action_id, template_arg, args):
     return cg.new_Pvariable(action_id, template_arg, paren)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(button_ns.using)

esphome/components/button/button.cpp

@@ -6,6 +6,19 @@ namespace button {
 
 static const char *const TAG = "button";
 
+// Function implementation of LOG_BUTTON macro to reduce code size
+void log_button(const char *tag, const char *prefix, const char *type, Button *obj) {
+  if (obj == nullptr) {
+    return;
+  }
+
+  ESP_LOGCONFIG(tag, "%s%s '%s'", prefix, type, obj->get_name().c_str());
+
+  if (!obj->get_icon_ref().empty()) {
+    ESP_LOGCONFIG(tag, "%s  Icon: '%s'", prefix, obj->get_icon_ref().c_str());
+  }
+}
+
 void Button::press() {
   ESP_LOGD(TAG, "'%s' Pressed.", this->get_name().c_str());
   this->press_action();

esphome/components/button/button.h

@@ -7,13 +7,10 @@
 namespace esphome {
 namespace button {
 
-#define LOG_BUTTON(prefix, type, obj) \
-  if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_icon().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon().c_str()); \
-    } \
-  }
+class Button;
+void log_button(const char *tag, const char *prefix, const char *type, Button *obj);
+
+#define LOG_BUTTON(prefix, type, obj) log_button(TAG, prefix, LOG_STR_LITERAL(type), obj)
 
 #define SUB_BUTTON(name) \
  protected: \

esphome/components/camera/buffer.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include <cinttypes>
+#include <cstddef>
+
+namespace esphome::camera {
+
+/// Interface for a generic buffer that stores image data.
+class Buffer {
+ public:
+  /// Returns a pointer to the buffer's data.
+  virtual uint8_t *get_data_buffer() = 0;
+  /// Returns the length of the buffer in bytes.
+  virtual size_t get_data_length() = 0;
+  virtual ~Buffer() = default;
+};
+
+}  // namespace esphome::camera