sascha/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-09-16 18:22:22 +01:00
Code Issues Releases Wiki Activity

[ethernet] Fix permanent component failure from undocumented ESP_FAIL in IPv6 setup (#10708)

Browse Source
This commit is contained in:
J. Nick Koston
2025-09-14 16:45:22 -05:00
committed by Jesse Hills
parent 5b5e5c213c
commit 646f4e66be
2 changed files with 47 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
esphome/components/ethernet/ethernet_component.cpp
View File

@@ -300,6 +300,7 @@ void EthernetComponent::loop() {
this->state_ = EthernetComponentState::CONNECTING;
this->start_connect_();
} else {
this->finish_connect_();
// When connected and stable, disable the loop to save CPU cycles
this->disable_loop();
}
@@ -486,10 +487,35 @@ void EthernetComponent::got_ip6_event_handler(void *arg, esp_event_base_t event_
}
#endif /* USE_NETWORK_IPV6 */
void EthernetComponent::finish_connect_() {
#if USE_NETWORK_IPV6
// Retry IPv6 link-local setup if it failed during initial connect
// This handles the case where min_ipv6_addr_count is NOT set (or is 0),
// allowing us to reach CONNECTED state with just IPv4.
// If IPv6 setup failed in start_connect_() because the interface wasn't ready:
// - Bootup timing issues (#10281)
// - Cable unplugged/network interruption (#10705)
// We can now retry since we're in CONNECTED state and the interface is definitely up.
if (!this->ipv6_setup_done_) {
esp_err_t err = esp_netif_create_ip6_linklocal(this->eth_netif_);
if (err == ESP_OK) {
ESP_LOGD(TAG, "IPv6 link-local address created (retry succeeded)");
}
// Always set the flag to prevent continuous retries
// If IPv6 setup fails here with the interface up and stable, it's
// likely a persistent issue (IPv6 disabled at router, hardware
// limitation, etc.) that won't be resolved by further retries.
// The device continues to work with IPv4.
this->ipv6_setup_done_ = true;
}
#endif /* USE_NETWORK_IPV6 */
}
void EthernetComponent::start_connect_() {
global_eth_component->got_ipv4_address_ = false;
#if USE_NETWORK_IPV6
global_eth_component->ipv6_count_ = 0;
this->ipv6_setup_done_ = false;
#endif /* USE_NETWORK_IPV6 */
this->connect_begin_ = millis();
this->status_set_warning(LOG_STR("waiting for IP configuration"));
@@ -545,9 +571,27 @@ void EthernetComponent::start_connect_() {
}
}
#if USE_NETWORK_IPV6
// Attempt to create IPv6 link-local address
// We MUST attempt this here, not just in finish_connect_(), because with
// min_ipv6_addr_count set, the component won't reach CONNECTED state without IPv6.
// However, this may fail with ESP_FAIL if the interface is not up yet:
// - At bootup when link isn't ready (#10281)
// - After disconnection/cable unplugged (#10705)
// We'll retry in finish_connect_() if it fails here.
err = esp_netif_create_ip6_linklocal(this->eth_netif_);
if (err != ESP_OK) {
ESPHL_ERROR_CHECK(err, "Enable IPv6 link local failed");
if (err == ESP_ERR_ESP_NETIF_INVALID_PARAMS) {
// This is a programming error, not a transient failure
ESPHL_ERROR_CHECK(err, "esp_netif_create_ip6_linklocal invalid parameters");
} else {
// ESP_FAIL means the interface isn't up yet
// This is expected and non-fatal, happens in multiple scenarios:
// - During reconnection after network interruptions (#10705)
// - At bootup when the link isn't ready yet (#10281)
// We'll retry once we reach CONNECTED state and the interface is up
ESP_LOGW(TAG, "esp_netif_create_ip6_linklocal failed: %s", esp_err_to_name(err));
// Don't mark component as failed - this is a transient error
}
}
#endif /* USE_NETWORK_IPV6 */

2
esphome/components/ethernet/ethernet_component.h
View File

@@ -102,6 +102,7 @@ class EthernetComponent : public Component {
#endif /* LWIP_IPV6 */
void start_connect_();
void finish_connect_();
void dump_connect_params_();
/// @brief Set `RMII Reference Clock Select` bit for KSZ8081.
void ksz8081_set_clock_reference_(esp_eth_mac_t *mac);
@@ -144,6 +145,7 @@ class EthernetComponent : public Component {
bool got_ipv4_address_{false};
#if LWIP_IPV6
uint8_t ipv6_count_{0};
bool ipv6_setup_done_{false};
#endif /* LWIP_IPV6 */
// Pointers at the end (naturally aligned)