Merge pull request #3714 from esphome/bump-2022.8.0b2

2022.8.0b2

.clang-tidy

@@ -2,12 +2,11 @@
 Checks: >-
   *,
   -abseil-*,
+  -altera-*,
   -android-*,
   -boost-*,
-  -bugprone-branch-clone,
   -bugprone-narrowing-conversions,
   -bugprone-signed-char-misuse,
-  -bugprone-too-small-loop-variable,
   -cert-dcl50-cpp,
   -cert-err58-cpp,
   -cert-oop57-cpp,
@@ -17,17 +16,15 @@ Checks: >-
   -clang-diagnostic-delete-abstract-non-virtual-dtor,
   -clang-diagnostic-delete-non-abstract-non-virtual-dtor,
   -clang-diagnostic-shadow-field,
-  -clang-diagnostic-sign-compare,
-  -clang-diagnostic-unused-variable,
   -clang-diagnostic-unused-const-variable,
+  -clang-diagnostic-unused-parameter,
+  -concurrency-*,
   -cppcoreguidelines-avoid-c-arrays,
-  -cppcoreguidelines-avoid-goto,
   -cppcoreguidelines-avoid-magic-numbers,
   -cppcoreguidelines-init-variables,
   -cppcoreguidelines-macro-usage,
   -cppcoreguidelines-narrowing-conversions,
   -cppcoreguidelines-non-private-member-variables-in-classes,
-  -cppcoreguidelines-owning-memory,
   -cppcoreguidelines-pro-bounds-array-to-pointer-decay,
   -cppcoreguidelines-pro-bounds-constant-array-index,
   -cppcoreguidelines-pro-bounds-pointer-arithmetic,
@@ -39,7 +36,6 @@ Checks: >-
   -cppcoreguidelines-pro-type-union-access,
   -cppcoreguidelines-pro-type-vararg,
   -cppcoreguidelines-special-member-functions,
-  -fuchsia-default-arguments,
   -fuchsia-multiple-inheritance,
   -fuchsia-overloaded-operator,
   -fuchsia-statically-constructed-objects,
@@ -49,6 +45,7 @@ Checks: >-
   -google-explicit-constructor,
   -google-readability-braces-around-statements,
   -google-readability-casting,
+  -google-readability-namespace-comments,
   -google-readability-todo,
   -google-runtime-references,
   -hicpp-*,
@@ -61,29 +58,26 @@ Checks: >-
   -misc-no-recursion,
   -misc-unused-parameters,
   -modernize-avoid-c-arrays,
+  -modernize-avoid-bind,
+  -modernize-concat-nested-namespaces,
   -modernize-return-braced-init-list,
   -modernize-use-auto,
   -modernize-use-default-member-init,
   -modernize-use-equals-default,
   -modernize-use-trailing-return-type,
+  -modernize-use-nodiscard,
   -mpi-*,
   -objc-*,
-  -readability-braces-around-statements,
-  -readability-const-return-type,
   -readability-convert-member-functions-to-static,
   -readability-else-after-return,
+  -readability-function-cognitive-complexity,
   -readability-implicit-bool-conversion,
   -readability-isolate-declaration,
   -readability-magic-numbers,
   -readability-make-member-function-const,
-  -readability-named-parameter,
-  -readability-qualified-auto,
-  -readability-redundant-access-specifiers,
-  -readability-redundant-member-init,
   -readability-redundant-string-init,
   -readability-uppercase-literal-suffix,
   -readability-use-anyofallof,
-  -warnings-as-errors
 WarningsAsErrors: '*'
 AnalyzeTemporaryDtors: false
 FormatStyle:     google
@@ -92,9 +86,11 @@ CheckOptions:
     value:           '1'
   - key:             google-readability-function-size.StatementThreshold
     value:           '800'
-  - key:             google-readability-namespace-comments.ShortNamespaceLines
+  - key:             google-runtime-int.TypeSuffix
+    value:           '_t'
+  - key:             llvm-namespace-comment.ShortNamespaceLines
     value:           '10'
-  - key:             google-readability-namespace-comments.SpacesBeforeComments
+  - key:             llvm-namespace-comment.SpacesBeforeComments
     value:           '2'
   - key:             modernize-loop-convert.MaxCopySize
     value:           '16'
@@ -108,6 +104,12 @@ CheckOptions:
     value:           llvm
   - key:             modernize-use-nullptr.NullMacros
     value:           'NULL'
+  - key:             modernize-make-unique.MakeSmartPtrFunction
+    value:           'make_unique'
+  - key:             modernize-make-unique.MakeSmartPtrFunctionHeader
+    value:           'esphome/core/helpers.h'
+  - key:             readability-braces-around-statements.ShortStatementLines
+    value:           2
   - key:             readability-identifier-naming.LocalVariableCase
     value:           'lower_case'
   - key:             readability-identifier-naming.ClassCase
@@ -121,15 +123,19 @@ CheckOptions:
   - key:             readability-identifier-naming.StaticConstantCase
     value:           'UPPER_CASE'
   - key:             readability-identifier-naming.StaticVariableCase
-    value:           'UPPER_CASE'
+    value:           'lower_case'
   - key:             readability-identifier-naming.GlobalConstantCase
     value:           'UPPER_CASE'
   - key:             readability-identifier-naming.ParameterCase
     value:           'lower_case'
-  - key:             readability-identifier-naming.PrivateMemberPrefix
-    value:           'NO_PRIVATE_MEMBERS_ALWAYS_USE_PROTECTED'
-  - key:             readability-identifier-naming.PrivateMethodPrefix
-    value:           'NO_PRIVATE_METHODS_ALWAYS_USE_PROTECTED'
+  - key:             readability-identifier-naming.PrivateMemberCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.PrivateMemberSuffix
+    value:           '_'
+  - key:             readability-identifier-naming.PrivateMethodCase
+    value:           'lower_case'
+  - key:             readability-identifier-naming.PrivateMethodSuffix
+    value:           '_'
   - key:             readability-identifier-naming.ClassMemberCase
     value:           'lower_case'
   - key:             readability-identifier-naming.ClassMemberCase
@@ -150,3 +156,5 @@ CheckOptions:
     value:           'lower_case'
   - key:             readability-identifier-naming.VirtualMethodSuffix
     value:           ''
+  - key:             readability-qualified-auto.AddConstToQualified
+    value:           0

.devcontainer/devcontainer.json

@@ -1,7 +1,6 @@
 {
   "name": "ESPHome Dev",
-  "context": "..",
-  "dockerFile": "../docker/Dockerfile.dev",
+  "image": "esphome/esphome-lint:dev",
   "postCreateCommand": [
     "script/devcontainer-post-create"
   ],

.gitattributes

@@ -0,0 +1,2 @@
+# Normalize line endings to LF in the repository
+* text eol=lf

.github/ISSUE_TEMPLATE/config.yml

@@ -9,4 +9,3 @@ contact_links:
   - name: Frequently Asked Question
     url: https://esphome.io/guides/faq.html
     about: Please view the FAQ for common questions and what to include in a bug report.
-    

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,4 +1,4 @@
-# What does this implement/fix? 
+# What does this implement/fix?
 
 Quick description and explanation of changes
 
@@ -16,6 +16,7 @@ Quick description and explanation of changes
 ## Test Environment
 
 - [ ] ESP32
+- [ ] ESP32 IDF
 - [ ] ESP8266
 
 ## Example entry for `config.yaml`:
@@ -34,6 +35,6 @@ Quick description and explanation of changes
 ## Checklist:
   - [ ] The code change is tested and works locally.
   - [ ] Tests have been added to verify that the new code works (under `tests/` folder).
-  
+
 If user exposed functionality or configuration variables are added/changed:
   - [ ] Documentation added/updated in [esphome-docs](https://github.com/esphome/esphome-docs).

.github/dependabot.yml

@@ -7,3 +7,8 @@ updates:
     ignore:
       # Hypotehsis is only used for testing and is updated quite often
       - dependency-name: hypothesis
+  - package-ecosystem: "github-actions"
+    directory: "/"
+    schedule:
+      interval: daily
+    open-pull-requests-limit: 10

.github/issue-close-app.yml

@@ -1,7 +0,0 @@
-comment: >-
-  https://github.com/esphome/esphome/issues/430
-issueConfigs:
-- content:
-  - "OTHERWISE THE ISSUE WILL BE CLOSED AUTOMATICALLY"
-
-caseInsensitive: false

.github/lock.yml

@@ -1,36 +0,0 @@
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 7
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels:
-  - keep-open
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: false
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: false
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo

.github/stale.yml

@@ -1,59 +0,0 @@
-# Configuration for probot-stale - https://github.com/probot/stale
-
-# Number of days of inactivity before an Issue or Pull Request becomes stale
-daysUntilStale: 60
-
-# Number of days of inactivity before an Issue or Pull Request with the stale label is closed.
-# Set to false to disable. If disabled, issues still need to be closed manually, but will remain marked as stale.
-daysUntilClose: 7
-
-# Only issues or pull requests with all of these labels are check if stale. Defaults to `[]` (disabled)
-onlyLabels: []
-
-# Issues or Pull Requests with these labels will never be considered stale. Set to `[]` to disable
-exemptLabels:
-  - not-stale
-
-# Set to true to ignore issues in a project (defaults to false)
-exemptProjects: false
-
-# Set to true to ignore issues in a milestone (defaults to false)
-exemptMilestones: true
-
-# Set to true to ignore issues with an assignee (defaults to false)
-exemptAssignees: false
-
-# Label to use when marking as stale
-staleLabel: stale
-
-# Comment to post when marking as stale. Set to `false` to disable
-markComment: >
-  This issue has been automatically marked as stale because it has not had
-  recent activity. It will be closed if no further activity occurs. Thank you
-  for your contributions.
-
-# Comment to post when removing the stale label.
-# unmarkComment: >
-#   Your comment here.
-
-# Comment to post when closing a stale Issue or Pull Request.
-# closeComment: >
-#   Your comment here.
-
-# Limit the number of actions per hour, from 1-30. Default is 30
-limitPerRun: 10
-
-# Limit to only `issues` or `pulls`
-only: pulls
-
-# Optionally, specify configuration settings that are specific to just 'issues' or 'pulls':
-# pulls:
-#   daysUntilStale: 30
-#   markComment: >
-#     This pull request has been automatically marked as stale because it has not had
-#     recent activity. It will be closed if no further activity occurs. Thank you
-#     for your contributions.
-
-# issues:
-#   exemptLabels:
-#     - confirmed

.github/workflows/ci-docker.yml

@@ -7,11 +7,19 @@ on:
     paths:
       - 'docker/**'
       - '.github/workflows/**'
+      - 'requirements*.txt'
+      - 'platformio.ini'
 
   pull_request:
     paths:
       - 'docker/**'
       - '.github/workflows/**'
+      - 'requirements*.txt'
+      - 'platformio.ini'
+
+permissions:
+  contents: read
+  packages: read
 
 jobs:
   check-docker:
@@ -22,11 +30,16 @@ jobs:
         arch: [amd64, armv7, aarch64]
         build_type: ["ha-addon", "docker", "lint"]
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Set up Python
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v4
       with:
         python-version: '3.9'
+    - name: Set up Docker Buildx
+      uses: docker/setup-buildx-action@v2
+    - name: Set up QEMU
+      uses: docker/setup-qemu-action@v2
+
     - name: Set TAG
       run: |
         echo "TAG=check" >> $GITHUB_ENV

.github/workflows/ci.yml

@@ -1,5 +1,3 @@
-# THESE JOBS ARE COPIED IN release.yml and release-dev.yml
-# PLEASE ALSO UPDATE THOSE FILES WHEN CHANGING LINES HERE
 name: CI
 
 on:
@@ -8,59 +6,15 @@ on:
 
   pull_request:
 
+permissions:
+  contents: read
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
 jobs:
-  ci-with-container:
-    name: ${{ matrix.name }}
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          - id: clang-format
-            name: Run script/clang-format
-          - id: clang-tidy
-            name: Run script/clang-tidy 1/4
-            split: 1
-          - id: clang-tidy
-            name: Run script/clang-tidy 2/4
-            split: 2
-          - id: clang-tidy
-            name: Run script/clang-tidy 3/4
-            split: 3
-          - id: clang-tidy
-            name: Run script/clang-tidy 4/4
-            split: 4
-
-    # cpp lint job runs with esphome-lint docker image so that clang-format-*
-    # doesn't have to be installed
-    container: ghcr.io/esphome/esphome-lint:1.1
-    steps:
-      - uses: actions/checkout@v2
-
-      - name: Register problem matchers
-        run: |
-          echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
-          echo "::add-matcher::.github/workflows/matchers/gcc.json"
-
-      # Also run git-diff-index so that the step is marked as failed on formatting errors,
-      # since clang-format doesn't do anything but change files if -i is passed.
-      - name: Run clang-format
-        run: |
-          script/clang-format -i
-          git diff-index --quiet HEAD --
-        if: ${{ matrix.id == 'clang-format' }}
-
-      - name: Run clang-tidy
-        run: script/clang-tidy --all-headers --fix --split-num 4 --split-at ${{ matrix.split }}
-        if: ${{ matrix.id == 'clang-tidy' }}
-
-      - name: Suggested changes
-        run: script/ci-suggest-changes
-        if: always()
-
   ci:
-    # Don't use the esphome-lint docker image because it may contain outdated requirements.
-    # This way, all dependencies are cached via the cache action.
     name: ${{ matrix.name }}
     runs-on: ubuntu-latest
     strategy:
@@ -74,48 +28,92 @@ jobs:
           - id: test
             file: tests/test1.yaml
             name: Test tests/test1.yaml
+            pio_cache_key: test1
           - id: test
             file: tests/test2.yaml
             name: Test tests/test2.yaml
+            pio_cache_key: test2
           - id: test
             file: tests/test3.yaml
             name: Test tests/test3.yaml
+            pio_cache_key: test3
           - id: test
             file: tests/test4.yaml
             name: Test tests/test4.yaml
+            pio_cache_key: test4
           - id: test
             file: tests/test5.yaml
             name: Test tests/test5.yaml
+            pio_cache_key: test5
           - id: pytest
             name: Run pytest
+          - id: clang-format
+            name: Run script/clang-format
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP8266
+            options: --environment esp8266-arduino-tidy --grep USE_ESP8266
+            pio_cache_key: tidyesp8266
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 1/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 1
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 2/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 2
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 3/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 3
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 Arduino 4/4
+            options: --environment esp32-arduino-tidy --split-num 4 --split-at 4
+            pio_cache_key: tidyesp32
+          - id: clang-tidy
+            name: Run script/clang-tidy for ESP32 IDF
+            options: --environment esp32-idf-tidy --grep USE_ESP_IDF
+            pio_cache_key: tidyesp32-idf
 
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Python
-        uses: actions/setup-python@v2
+        uses: actions/setup-python@v4
+        id: python
         with:
-          python-version: '3.7'
+          python-version: '3.8'
 
-      - name: Cache pip modules
-        uses: actions/cache@v1
+      - name: Cache virtualenv
+        uses: actions/cache@v3
         with:
-          path: ~/.cache/pip
-          key: esphome-pip-3.7-${{ hashFiles('setup.py') }}
+          path: .venv
+          key: venv-${{ steps.python.outputs.python-version }}-${{ hashFiles('requirements*.txt') }}
           restore-keys: |
-            esphome-pip-3.7-
+            venv-${{ steps.python.outputs.python-version }}-
 
-      # Use per test platformio cache because tests have different platform versions
-      - name: Cache ~/.platformio
-        uses: actions/cache@v1
+      - name: Set up virtualenv
+        run: |
+          python -m venv .venv
+          source .venv/bin/activate
+          pip install -U pip
+          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+          pip install -e .
+          echo "$GITHUB_WORKSPACE/.venv/bin" >> $GITHUB_PATH
+          echo "VIRTUAL_ENV=$GITHUB_WORKSPACE/.venv" >> $GITHUB_ENV
+
+      # Use per check platformio cache because checks use different parts
+      - name: Cache platformio
+        uses: actions/cache@v3
         with:
           path: ~/.platformio
-          key: test-home-platformio-${{ matrix.file }}-${{ hashFiles('esphome/core/config.py') }}
-          restore-keys: |
-            test-home-platformio-${{ matrix.file }}-
-        if: ${{ matrix.id == 'test' }}
+          key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
+        if: matrix.id == 'test' || matrix.id == 'clang-tidy'
 
-      - name: Set up python environment
-        run: script/setup
+      - name: Install clang tools
+        run: |
+          sudo apt-get install \
+              clang-format-11 \
+              clang-tidy-11
+        if: matrix.id == 'clang-tidy' || matrix.id == 'clang-format'
 
       - name: Register problem matchers
         run: |
@@ -124,20 +122,45 @@ jobs:
           echo "::add-matcher::.github/workflows/matchers/python.json"
           echo "::add-matcher::.github/workflows/matchers/pytest.json"
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
+          echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
       - name: Lint Custom
         run: |
           script/ci-custom.py
           script/build_codeowners.py --check
-        if: ${{ matrix.id == 'ci-custom' }}
+        if: matrix.id == 'ci-custom'
+
       - name: Lint Python
-        run: script/lint-python
-        if: ${{ matrix.id == 'lint-python' }}
+        run: script/lint-python -a
+        if: matrix.id == 'lint-python'
 
       - run: esphome compile ${{ matrix.file }}
-        if: ${{ matrix.id == 'test' }}
+        if: matrix.id == 'test'
+        env:
+          # Also cache libdeps, store them in a ~/.platformio subfolder
+          PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
 
       - name: Run pytest
         run: |
           pytest -vv --tb=native tests
-        if: ${{ matrix.id == 'pytest' }}
+        if: matrix.id == 'pytest'
+
+      # Also run git-diff-index so that the step is marked as failed on formatting errors,
+      # since clang-format doesn't do anything but change files if -i is passed.
+      - name: Run clang-format
+        run: |
+          script/clang-format -i
+          git diff-index --quiet HEAD --
+        if: matrix.id == 'clang-format'
+
+      - name: Run clang-tidy
+        run: |
+          script/clang-tidy --all-headers --fix ${{ matrix.options }}
+        if: matrix.id == 'clang-tidy'
+        env:
+          # Also cache libdeps, store them in a ~/.platformio subfolder
+          PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
+
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always() && (matrix.id == 'clang-tidy' || matrix.id == 'clang-format' || matrix.id == 'lint-python')

.github/workflows/docker-lint-build.yml

@@ -1,100 +0,0 @@
-name: Build and publish lint docker image
-
-# Only run when docker paths change
-on:
-  push:
-    branches: [dev]
-    paths:
-      - 'docker/Dockerfile.lint'
-      - 'requirements.txt'
-      - 'requirements_optional.txt'
-      - 'requirements_test.txt'
-      - 'platformio.ini'
-      - '.github/workflows/docker-lint-build.yml'
-
-jobs:
-  deploy-docker:
-    name: Build and publish docker containers
-    if: github.repository == 'esphome/esphome'
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        arch: [amd64, armv7, aarch64]
-        build_type: ["lint"]
-    steps:
-    - uses: actions/checkout@v2
-    - name: Set up Python
-      uses: actions/setup-python@v2
-      with:
-        python-version: '3.9'
-    - name: Set TAG
-      run: |
-        echo "TAG=1.1" >> $GITHUB_ENV
-
-    - name: Run build
-      run: |
-        docker/build.py \
-          --tag "${TAG}" \
-          --arch "${{ matrix.arch }}" \
-          --build-type "${{ matrix.build_type }}" \
-          build
-
-    - name: Log in to docker hub
-      uses: docker/login-action@v1
-      with:
-        username: ${{ secrets.DOCKER_USER }}
-        password: ${{ secrets.DOCKER_PASSWORD }}
-    - name: Log in to the GitHub container registry
-      uses: docker/login-action@v1
-      with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-    - name: Run push
-      run: |
-        docker/build.py \
-          --tag "${TAG}" \
-          --arch "${{ matrix.arch }}" \
-          --build-type "${{ matrix.build_type }}" \
-          push
-
-  deploy-docker-manifest:
-    if: github.repository == 'esphome/esphome'
-    runs-on: ubuntu-latest
-    needs: [deploy-docker]
-    strategy:
-      matrix:
-        build_type: ["lint"]
-    steps:
-    - uses: actions/checkout@v2
-    - name: Set up Python
-      uses: actions/setup-python@v2
-      with:
-        python-version: '3.9'
-    - name: Set TAG
-      run: |
-        echo "TAG=1.1" >> $GITHUB_ENV
-    - name: Enable experimental manifest support
-      run: |
-        mkdir -p ~/.docker
-        echo "{\"experimental\": \"enabled\"}" > ~/.docker/config.json
-
-    - name: Log in to docker hub
-      uses: docker/login-action@v1
-      with:
-        username: ${{ secrets.DOCKER_USER }}
-        password: ${{ secrets.DOCKER_PASSWORD }}
-    - name: Log in to the GitHub container registry
-      uses: docker/login-action@v1
-      with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-    - name: Run manifest
-      run: |
-        docker/build.py \
-          --tag "${TAG}" \
-          --build-type "${{ matrix.build_type }}" \
-          manifest

.github/workflows/lock.yml

@@ -0,0 +1,27 @@
+name: Lock
+
+on:
+  schedule:
+    - cron: '30 0 * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  lock:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: dessant/lock-threads@v3
+        with:
+          pr-inactive-days: "1"
+          pr-lock-reason: ""
+          exclude-any-pr-labels: keep-open
+
+          issue-inactive-days: "7"
+          issue-lock-reason: ""
+          exclude-any-issue-labels: keep-open

.github/workflows/matchers/ci-custom.json

@@ -4,7 +4,7 @@
             "owner": "ci-custom",
             "pattern": [
                 {
-                    "regexp": "^ERROR (.*):(\\d+):(\\d+) - (.*)$",
+                    "regexp": "^(.*):(\\d+):(\\d+):\\s+lint:\\s+(.*)$",
                     "file": 1,
                     "line": 2,
                     "column": 3,

.github/workflows/matchers/gcc.json

@@ -5,7 +5,7 @@
       "severity": "error",
       "pattern": [
         {
-          "regexp": "^(.*):(\\d+):(\\d+):\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
+          "regexp": "^src/(.*):(\\d+):(\\d+):\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$",
           "file": 1,
           "line": 2,
           "column": 3,

.github/workflows/matchers/lint-python.json

@@ -1,11 +1,22 @@
 {
   "problemMatcher": [
+    {
+      "owner": "black",
+      "severity": "error",
+      "pattern": [
+        {
+          "regexp": "^(.*): (Please format this file with the black formatter)",
+          "file": 1,
+          "message": 2
+        }
+      ]
+    },
     {
       "owner": "flake8",
       "severity": "error",
       "pattern": [
           {
-          "regexp": "^(.*):(\\d+) - ([EFCDNW]\\d{3}.*)$",
+          "regexp": "^(.*):(\\d+): ([EFCDNW]\\d{3}.*)$",
           "file": 1,
           "line": 2,
           "message": 3
@@ -17,7 +28,7 @@
       "severity": "error",
       "pattern": [
         {
-          "regexp": "^(.*):(\\d+) - (\\[[EFCRW]\\d{4}\\(.*\\),.*\\].*)$",
+          "regexp": "^(.*):(\\d+): (\\[[EFCRW]\\d{4}\\(.*\\),.*\\].*)$",
           "file": 1,
           "line": 2,
           "message": 3

.github/workflows/release.yml

@@ -7,6 +7,9 @@ on:
   schedule:
     - cron: "0 2 * * *"
 
+permissions:
+  contents: read
+
 jobs:
   init:
     name: Initialize build
@@ -14,7 +17,7 @@ jobs:
     outputs:
       tag: ${{ steps.tag.outputs.tag }}
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Get tag
         id: tag
         run: |
@@ -32,9 +35,9 @@ jobs:
     if: github.repository == 'esphome/esphome' && github.event_name == 'release'
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Set up Python
-        uses: actions/setup-python@v1
+        uses: actions/setup-python@v4
         with:
           python-version: '3.x'
       - name: Set up python environment
@@ -52,58 +55,62 @@ jobs:
   deploy-docker:
     name: Build and publish docker containers
     if: github.repository == 'esphome/esphome'
+    permissions:
+      contents: read
+      packages: write
     runs-on: ubuntu-latest
     needs: [init]
     strategy:
       matrix:
         arch: [amd64, armv7, aarch64]
-        build_type: ["ha-addon", "docker"]
+        build_type: ["ha-addon", "docker", "lint"]
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Set up Python
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v4
       with:
         python-version: '3.9'
 
-    - name: Run build
-      run: |
-        docker/build.py \
-          --tag "${{ needs.init.outputs.tag }}" \
-          --arch "${{ matrix.arch }}" \
-          --build-type "${{ matrix.build_type }}" \
-          build
+    - name: Set up Docker Buildx
+      uses: docker/setup-buildx-action@v2
+    - name: Set up QEMU
+      uses: docker/setup-qemu-action@v2
 
     - name: Log in to docker hub
-      uses: docker/login-action@v1
+      uses: docker/login-action@v2
       with:
         username: ${{ secrets.DOCKER_USER }}
         password: ${{ secrets.DOCKER_PASSWORD }}
     - name: Log in to the GitHub container registry
-      uses: docker/login-action@v1
+      uses: docker/login-action@v2
       with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
-    - name: Run push
+    - name: Build and push
       run: |
         docker/build.py \
           --tag "${{ needs.init.outputs.tag }}" \
           --arch "${{ matrix.arch }}" \
           --build-type "${{ matrix.build_type }}" \
-          push
+          build \
+          --push
 
   deploy-docker-manifest:
     if: github.repository == 'esphome/esphome'
+    permissions:
+      contents: read
+      packages: write
     runs-on: ubuntu-latest
     needs: [init, deploy-docker]
     strategy:
       matrix:
-        build_type: ["ha-addon", "docker"]
+        build_type: ["ha-addon", "docker", "lint"]
     steps:
-    - uses: actions/checkout@v2
+    - uses: actions/checkout@v3
     - name: Set up Python
-      uses: actions/setup-python@v2
+      uses: actions/setup-python@v4
       with:
         python-version: '3.9'
     - name: Enable experimental manifest support
@@ -112,12 +119,12 @@ jobs:
         echo "{\"experimental\": \"enabled\"}" > ~/.docker/config.json
 
     - name: Log in to docker hub
-      uses: docker/login-action@v1
+      uses: docker/login-action@v2
       with:
         username: ${{ secrets.DOCKER_USER }}
         password: ${{ secrets.DOCKER_PASSWORD }}
     - name: Log in to the GitHub container registry
-      uses: docker/login-action@v1
+      uses: docker/login-action@v2
       with:
           registry: ghcr.io
           username: ${{ github.actor }}
@@ -130,18 +137,18 @@ jobs:
           --build-type "${{ matrix.build_type }}" \
           manifest
 
-  deploy-hassio-repo:
+  deploy-ha-addon-repo:
     if: github.repository == 'esphome/esphome' && github.event_name == 'release'
     runs-on: ubuntu-latest
     needs: [deploy-docker]
     steps:
       - env:
-          TOKEN: ${{ secrets.DEPLOY_HASSIO_TOKEN }}
+          TOKEN: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
         run: |
           TAG="${GITHUB_REF#refs/tags/}"
           curl \
             -u ":$TOKEN" \
             -X POST \
             -H "Accept: application/vnd.github.v3+json" \
-            https://api.github.com/repos/esphome/hassio/actions/workflows/bump-version.yml/dispatches \
+            https://api.github.com/repos/esphome/home-assistant-addon/actions/workflows/bump-version.yml/dispatches \
             -d "{\"ref\":\"main\",\"inputs\":{\"version\":\"$TAG\"}}"

.github/workflows/stale.yml

@@ -0,0 +1,48 @@
+name: Stale
+
+on:
+  schedule:
+    - cron: '30 0 * * *'
+  workflow_dispatch:
+
+permissions:
+  issues: write
+  pull-requests: write
+
+concurrency:
+  group: lock
+
+jobs:
+  stale:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v5
+        with:
+          days-before-pr-stale: 90
+          days-before-pr-close: 7
+          days-before-issue-stale: -1
+          days-before-issue-close: -1
+          remove-stale-when-updated: true
+          stale-pr-label: "stale"
+          exempt-pr-labels: "no-stale"
+          stale-pr-message: >
+            There hasn't been any activity on this pull request recently. This
+            pull request has been automatically marked as stale because of that
+            and will be closed if no further activity occurs within 7 days.
+            Thank you for your contributions.
+
+  # Use stale to automatically close issues with a reference to the issue tracker
+  close-issues:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/stale@v5
+        with:
+          days-before-pr-stale: -1
+          days-before-pr-close: -1
+          days-before-issue-stale: 1
+          days-before-issue-close: 1
+          remove-stale-when-updated: true
+          stale-issue-label: "stale"
+          exempt-issue-labels: "not-stale"
+          stale-issue-message: >
+            https://github.com/esphome/esphome/issues/430

.gitignore

@@ -77,6 +77,7 @@ venv/
 ENV/
 env.bak/
 venv.bak/
+venv-*/
 
 # mypy
 .mypy_cache/
@@ -102,10 +103,7 @@ CMakeLists.txt
 .idea/**/dynamic.xml
 
 # CMake
-cmake-build-debug/
-cmake-build-livingroom8266/
-cmake-build-livingroom32/
-cmake-build-release/
+cmake-build-*/
 
 CMakeCache.txt
 CMakeFiles
@@ -127,3 +125,6 @@ tests/.esphome/
 /.temp-clang-tidy.cpp
 /.temp/
 .pio/
+
+sdkconfig.*
+!sdkconfig.defaults

.gitpod.yml

@@ -3,4 +3,4 @@ ports:
   onOpen: open-preview
 tasks:
 - before: pyenv local $(pyenv version | grep '^3\.' | cut -d ' ' -f 1) && script/setup
-  command: python -m esphome config dashboard
+  command: python -m esphome dashboard config

.pre-commit-config.yaml

@@ -2,7 +2,7 @@
 # See https://pre-commit.com/hooks.html for more hooks
 repos:
   - repo: https://github.com/ambv/black
-    rev: 20.8b1
+    rev: 22.6.0
     hooks:
     - id: black
       args:
@@ -10,7 +10,7 @@ repos:
         - --quiet
       files: ^((esphome|script|tests)/.+)?[^/]+\.py$
   - repo: https://gitlab.com/pycqa/flake8
-    rev: 3.8.4
+    rev: 4.0.1
     hooks:
       - id: flake8
         additional_dependencies:
@@ -25,3 +25,8 @@ repos:
           - --branch=dev
           - --branch=release
           - --branch=beta
+  - repo: https://github.com/asottile/pyupgrade
+    rev: v2.37.3
+    hooks:
+      - id: pyupgrade
+        args: [--py38-plus]

CODEOWNERS

@@ -14,8 +14,12 @@ esphome/core/* @esphome/core
 esphome/components/ac_dimmer/* @glmnet
 esphome/components/adc/* @esphome/core
 esphome/components/addressable_light/* @justfalter
+esphome/components/airthings_ble/* @jeromelaban
+esphome/components/airthings_wave_mini/* @ncareau
+esphome/components/airthings_wave_plus/* @jeromelaban
 esphome/components/am43/* @buxtronix
 esphome/components/am43/cover/* @buxtronix
+esphome/components/analog_threshold/* @ianchi
 esphome/components/animation/* @syndlex
 esphome/components/anova/* @buxtronix
 esphome/components/api/* @OttoWinter
@@ -24,48 +28,87 @@ esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
+esphome/components/bedjet/* @jhansche
+esphome/components/bh1750/* @OttoWinter
 esphome/components/binary_sensor/* @esphome/core
+esphome/components/bl0939/* @ziceva
+esphome/components/bl0940/* @tobias-
 esphome/components/ble_client/* @buxtronix
 esphome/components/bme680_bsec/* @trvrnrth
+esphome/components/bmp3xx/* @martgras
+esphome/components/button/* @esphome/core
 esphome/components/canbus/* @danielschramm @mvturnho
+esphome/components/cap1188/* @MrEditor97
 esphome/components/captive_portal/* @OttoWinter
+esphome/components/ccs811/* @habbie
+esphome/components/cd74hc4067/* @asoehlke
 esphome/components/climate/* @esphome/core
 esphome/components/climate_ir/* @glmnet
 esphome/components/color_temperature/* @jesserockz
 esphome/components/coolix/* @glmnet
+esphome/components/copy/* @OttoWinter
 esphome/components/cover/* @esphome/core
 esphome/components/cs5460a/* @balrog-kun
+esphome/components/cse7761/* @berfenger
 esphome/components/ct_clamp/* @jesserockz
+esphome/components/current_based/* @djwmarcx
+esphome/components/dac7678/* @NickB1
+esphome/components/daly_bms/* @s1lvi0
+esphome/components/dashboard_import/* @esphome/core
 esphome/components/debug/* @OttoWinter
+esphome/components/delonghi/* @grob6000
 esphome/components/dfplayer/* @glmnet
 esphome/components/dht/* @OttoWinter
 esphome/components/ds1307/* @badbadc0ffee
 esphome/components/dsmr/* @glmnet @zuidwijk
+esphome/components/ektf2232/* @jesserockz
+esphome/components/ens210/* @itn3rd77
+esphome/components/esp32/* @esphome/core
 esphome/components/esp32_ble/* @jesserockz
 esphome/components/esp32_ble_server/* @jesserockz
+esphome/components/esp32_camera_web_server/* @ayufan
+esphome/components/esp32_can/* @Sympatron
 esphome/components/esp32_improv/* @jesserockz
+esphome/components/esp8266/* @esphome/core
 esphome/components/exposure_notifications/* @OttoWinter
 esphome/components/ezo/* @ssieb
 esphome/components/fastled_base/* @OttoWinter
+esphome/components/feedback/* @ianchi
 esphome/components/fingerprint_grow/* @OnFreund @loongyh
 esphome/components/globals/* @esphome/core
 esphome/components/gpio/* @esphome/core
 esphome/components/gps/* @coogle
+esphome/components/graph/* @synco
+esphome/components/growatt_solar/* @leeuwte
 esphome/components/havells_solar/* @sourabhjaiswal
+esphome/components/hbridge/fan/* @WeekendWarrior
+esphome/components/hbridge/light/* @DotNetDann
+esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
 esphome/components/homeassistant/* @OttoWinter
+esphome/components/honeywellabp/* @RubyBailey
 esphome/components/hrxl_maxsonar_wr/* @netmikey
+esphome/components/hydreon_rgxx/* @functionpointer
 esphome/components/i2c/* @esphome/core
-esphome/components/improv/* @jesserockz
+esphome/components/i2s_audio/* @jesserockz
+esphome/components/improv_serial/* @esphome/core
+esphome/components/ina260/* @MrEditor97
 esphome/components/inkbird_ibsth1_mini/* @fkirill
 esphome/components/inkplate6/* @jesserockz
 esphome/components/integration/* @OttoWinter
 esphome/components/interval/* @esphome/core
 esphome/components/json/* @OttoWinter
+esphome/components/kalman_combinator/* @Cat-Ion
 esphome/components/ledc/* @OttoWinter
 esphome/components/light/* @esphome/core
+esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
+esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
+esphome/components/ltr390/* @sjtrny
+esphome/components/max31865/* @DAVe3283
+esphome/components/max44009/* @berfenger
 esphome/components/max7219digit/* @rspaargaren
+esphome/components/max9611/* @mckaymatthew
 esphome/components/mcp23008/* @jesserockz
 esphome/components/mcp23017/* @jesserockz
 esphome/components/mcp23s08/* @SenexCrenshaw @jesserockz
@@ -74,10 +117,28 @@ esphome/components/mcp23x08_base/* @jesserockz
 esphome/components/mcp23x17_base/* @jesserockz
 esphome/components/mcp23xxx_base/* @jesserockz
 esphome/components/mcp2515/* @danielschramm @mvturnho
+esphome/components/mcp3204/* @rsumner
+esphome/components/mcp4728/* @berfenger
+esphome/components/mcp47a1/* @jesserockz
 esphome/components/mcp9808/* @k7hpn
-esphome/components/midea_ac/* @dudanov
-esphome/components/midea_dongle/* @dudanov
+esphome/components/md5/* @esphome/core
+esphome/components/mdns/* @esphome/core
+esphome/components/media_player/* @jesserockz
+esphome/components/midea/* @dudanov
+esphome/components/midea_ir/* @dudanov
 esphome/components/mitsubishi/* @RubyBailey
+esphome/components/mlx90393/* @functionpointer
+esphome/components/modbus_controller/* @martgras
+esphome/components/modbus_controller/binary_sensor/* @martgras
+esphome/components/modbus_controller/number/* @martgras
+esphome/components/modbus_controller/output/* @martgras
+esphome/components/modbus_controller/select/* @martgras @stegm
+esphome/components/modbus_controller/sensor/* @martgras
+esphome/components/modbus_controller/switch/* @martgras
+esphome/components/modbus_controller/text_sensor/* @martgras
+esphome/components/mopeka_ble/* @spbrogan
+esphome/components/mopeka_pro_check/* @spbrogan
+esphome/components/mpu6886/* @fabaff
 esphome/components/network/* @esphome/core
 esphome/components/nextion/* @senexcrenshaw
 esphome/components/nextion/binary_sensor/* @senexcrenshaw
@@ -90,13 +151,20 @@ esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
+esphome/components/pm1006/* @habbie
 esphome/components/pmsa003i/* @sjtrny
 esphome/components/pn532/* @OttoWinter @jesserockz
 esphome/components/pn532_i2c/* @OttoWinter @jesserockz
 esphome/components/pn532_spi/* @OttoWinter @jesserockz
 esphome/components/power_supply/* @esphome/core
-esphome/components/pulse_meter/* @stevebaxter
+esphome/components/preferences/* @esphome/core
+esphome/components/psram/* @esphome/core
+esphome/components/pulse_meter/* @cstaahl @stevebaxter
 esphome/components/pvvx_mithermometer/* @pasiz
+esphome/components/qmp6988/* @andrewpc
+esphome/components/qr_code/* @wjtje
+esphome/components/radon_eye_ble/* @jeffeb3
+esphome/components/radon_eye_rd200/* @jeffeb3
 esphome/components/rc522/* @glmnet
 esphome/components/rc522_i2c/* @glmnet
 esphome/components/rc522_spi/* @glmnet
@@ -104,18 +172,30 @@ esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/rtttl/* @glmnet
+esphome/components/safe_mode/* @jsuanet @paulmonigatti
+esphome/components/scd4x/* @martgras @sjtrny
 esphome/components/script/* @esphome/core
 esphome/components/sdm_meter/* @jesserockz @polyfaces
 esphome/components/sdp3x/* @Azimath
 esphome/components/selec_meter/* @sourabhjaiswal
 esphome/components/select/* @esphome/core
+esphome/components/sen5x/* @martgras
+esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
 esphome/components/sgp40/* @SenexCrenshaw
+esphome/components/sgp4x/* @SenexCrenshaw @martgras
+esphome/components/shelly_dimmer/* @edge90 @rnauber
 esphome/components/sht4x/* @sjtrny
-esphome/components/shutdown/* @esphome/core
+esphome/components/shutdown/* @esphome/core @jsuanet
 esphome/components/sim800l/* @glmnet
 esphome/components/sm2135/* @BoukeHaarsma23
+esphome/components/sml/* @alengwenus
+esphome/components/smt100/* @piechade
+esphome/components/socket/* @esphome/core
+esphome/components/sonoff_d1/* @anatoly-savchenkov
 esphome/components/spi/* @esphome/core
+esphome/components/sprinkler/* @kbx81
+esphome/components/sps30/* @martgras
 esphome/components/ssd1322_base/* @kbx81
 esphome/components/ssd1322_spi/* @kbx81
 esphome/components/ssd1325_base/* @kbx81
@@ -129,6 +209,7 @@ esphome/components/ssd1351_base/* @kbx81
 esphome/components/ssd1351_spi/* @kbx81
 esphome/components/st7735/* @SenexCrenshaw
 esphome/components/st7789v/* @kbx81
+esphome/components/st7920/* @marsjan155
 esphome/components/substitutions/* @esphome/core
 esphome/components/sun/* @OttoWinter
 esphome/components/switch/* @esphome/core
@@ -144,16 +225,24 @@ esphome/components/tmp102/* @timsavage
 esphome/components/tmp117/* @Azimath
 esphome/components/tof10120/* @wstrzalka
 esphome/components/toshiba/* @kbx81
+esphome/components/touchscreen/* @jesserockz
 esphome/components/tsl2591/* @wjcarpenter
 esphome/components/tuya/binary_sensor/* @jesserockz
 esphome/components/tuya/climate/* @jesserockz
+esphome/components/tuya/number/* @frankiboy1
+esphome/components/tuya/select/* @bearpawmaxim
 esphome/components/tuya/sensor/* @jesserockz
 esphome/components/tuya/switch/* @jesserockz
+esphome/components/tuya/text_sensor/* @dentra
 esphome/components/uart/* @esphome/core
 esphome/components/ultrasonic/* @OttoWinter
 esphome/components/version/* @esphome/core
+esphome/components/wake_on_lan/* @willwill2will54
 esphome/components/web_server_base/* @OttoWinter
 esphome/components/whirlpool/* @glmnet
+esphome/components/whynter/* @aeonsablaze
 esphome/components/xiaomi_lywsd03mmc/* @ahpohl
+esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs
+esphome/components/xiaomi_rtcgq02lm/* @jesserockz
 esphome/components/xpt2046/* @numo68

CONTRIBUTING.md

@@ -1,15 +1,11 @@
 # Contributing to ESPHome
 
-This python project is responsible for reading in YAML configuration files,
-converting them to C++ code. This code is then converted to a platformio project and compiled
-with [esphome-core](https://github.com/esphome/esphome-core), the C++ framework behind the project.
-
-For a detailed guide, please see https://esphome.io/guides/contributing.html#contributing-to-esphomeyaml
+For a detailed guide, please see https://esphome.io/guides/contributing.html#contributing-to-esphome
 
 Things to note when contributing:
 
  - Please test your changes :)
- - If a new feature is added or an existing user-facing feature is changed, you should also 
+ - If a new feature is added or an existing user-facing feature is changed, you should also
    update the [docs](https://github.com/esphome/esphome-docs). See [contributing to esphome-docs](https://esphome.io/guides/contributing.html#contributing-to-esphomedocs)
    for more information.
  - Please also update the tests in the `tests/` folder. You can do so by just adding a line in one of the YAML files

MANIFEST.in

@@ -4,4 +4,5 @@ include requirements.txt
 include esphome/dashboard/templates/*.html
 recursive-include esphome/dashboard/static *.ico *.js *.css *.woff* LICENSE
 recursive-include esphome *.cpp *.h *.tcc
+recursive-include esphome *.py.script
 recursive-include esphome LICENSE.txt

docker/Dockerfile

@@ -1,5 +1,57 @@
-ARG BUILD_FROM=esphome/esphome-base:latest
-FROM ${BUILD_FROM}
+# Build these with the build.py script
+# Example:
+#   python3 docker/build.py --tag dev --arch amd64 --build-type docker build
+
+# One of "docker", "hassio"
+ARG BASEIMGTYPE=docker
+
+# https://github.com/hassio-addons/addon-debian-base/releases
+FROM ghcr.io/hassio-addons/debian-base/amd64:5.3.0 AS base-hassio-amd64
+FROM ghcr.io/hassio-addons/debian-base/aarch64:5.3.0 AS base-hassio-arm64
+FROM ghcr.io/hassio-addons/debian-base/armv7:5.3.0 AS base-hassio-armv7
+# https://hub.docker.com/_/debian?tab=tags&page=1&name=bullseye
+FROM debian:bullseye-20220328-slim AS base-docker-amd64
+FROM debian:bullseye-20220328-slim AS base-docker-arm64
+FROM debian:bullseye-20220328-slim AS base-docker-armv7
+
+# Use TARGETARCH/TARGETVARIANT defined by docker
+# https://docs.docker.com/engine/reference/builder/#automatic-platform-args-in-the-global-scope
+FROM base-${BASEIMGTYPE}-${TARGETARCH}${TARGETVARIANT} AS base
+
+RUN \
+    apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        python3=3.9.2-3 \
+        python3-pip=20.3.4-4+deb11u1 \
+        python3-setuptools=52.0.0-4 \
+        python3-pil=8.1.2+dfsg-0.3+deb11u1 \
+        python3-cryptography=3.3.2-1 \
+        iputils-ping=3:20210202-1 \
+        git=1:2.30.2-1 \
+        curl=7.74.0-1.3+deb11u1 \
+        openssh-client=1:8.4p1-5 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
+
+ENV \
+  # Fix click python3 lang warning https://click.palletsprojects.com/en/7.x/python3/
+  LANG=C.UTF-8 LC_ALL=C.UTF-8 \
+  # Store globally installed pio libs in /piolibs
+  PLATFORMIO_GLOBALLIB_DIR=/piolibs
+
+RUN \
+    # Ubuntu python3-pip is missing wheel
+    pip3 install --no-cache-dir \
+        wheel==0.37.1 \
+        platformio==6.0.2 \
+    # Change some platformio settings
+    && platformio settings set enable_telemetry No \
+    && platformio settings set check_platformio_interval 1000000 \
+    && mkdir -p /piolibs
+
 
 # First install requirements to leverage caching when requirements don't change
 COPY requirements.txt requirements_optional.txt docker/platformio_install_deps.py platformio.ini /
@@ -7,9 +59,13 @@ RUN \
     pip3 install --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
     && /platformio_install_deps.py /platformio.ini
 
-# Then copy esphome and install
-COPY . .
-RUN pip3 install --no-cache-dir -e .
+
+# ======================= docker-type image =======================
+FROM base AS docker
+
+# Copy esphome and install
+COPY . /esphome
+RUN pip3 install --no-cache-dir --no-use-pep517 -e /esphome
 
 # Settings for dashboard
 ENV USERNAME="" PASSWORD=""
@@ -17,14 +73,77 @@ ENV USERNAME="" PASSWORD=""
 # Expose the dashboard to Docker
 EXPOSE 6052
 
-# Run healthcheck (heartbeat)
-HEALTHCHECK --interval=30s --timeout=30s \
-  CMD curl --fail http://localhost:6052 || exit 1
+COPY docker/docker_entrypoint.sh /entrypoint.sh
 
 # The directory the user should mount their configuration files to
+VOLUME /config
 WORKDIR /config
-# Set entrypoint to esphome so that the user doesn't have to type 'esphome'
+# Set entrypoint to esphome (via a script) so that the user doesn't have to type 'esphome'
 # in every docker command twice
-ENTRYPOINT ["esphome"]
+ENTRYPOINT ["/entrypoint.sh"]
 # When no arguments given, start the dashboard in the workdir
 CMD ["dashboard", "/config"]
+
+
+
+
+# ======================= hassio-type image =======================
+FROM base AS hassio
+
+RUN \
+    apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        nginx-light=1.18.0-6.1+deb11u2 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
+
+ARG BUILD_VERSION=dev
+
+# Copy root filesystem
+COPY docker/ha-addon-rootfs/ /
+
+# Copy esphome and install
+COPY . /esphome
+RUN pip3 install --no-cache-dir --no-use-pep517 -e /esphome
+
+# Labels
+LABEL \
+    io.hass.name="ESPHome" \
+    io.hass.description="Manage and program ESP8266/ESP32 microcontrollers through YAML configuration files" \
+    io.hass.type="addon" \
+    io.hass.version="${BUILD_VERSION}"
+    # io.hass.arch is inherited from addon-debian-base
+
+
+
+
+# ======================= lint-type image =======================
+FROM base AS lint
+
+ENV \
+  PLATFORMIO_CORE_DIR=/esphome/.temp/platformio
+
+RUN \
+    apt-get update \
+    # Use pinned versions so that we get updates with build caching
+    && apt-get install -y --no-install-recommends \
+        clang-format-11=1:11.0.1-2 \
+        clang-tidy-11=1:11.0.1-2 \
+        patch=2.7.6-7 \
+        software-properties-common=0.96.20.2-2.1 \
+        nano=5.4-2+deb11u1 \
+        build-essential=12.9 \
+        python3-dev=3.9.2-3 \
+    && rm -rf \
+        /tmp/* \
+        /var/{cache,log}/* \
+        /var/lib/apt/lists/*
+
+COPY requirements_test.txt /
+RUN pip3 install --no-cache-dir -r /requirements_test.txt
+
+VOLUME ["/esphome"]
+WORKDIR /esphome

docker/Dockerfile.dev

@@ -1 +0,0 @@
-FROM esphome/esphome-lint:1.1

docker/Dockerfile.hassio

@@ -1,25 +0,0 @@
-ARG BUILD_FROM=esphome/esphome-hassio-base:latest
-FROM ${BUILD_FROM}
-
-# First install requirements to leverage caching when requirements don't change
-COPY requirements.txt requirements_optional.txt docker/platformio_install_deps.py platformio.ini /
-RUN \
-    pip3 install --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
-    && /platformio_install_deps.py /platformio.ini
-
-# Copy root filesystem
-COPY docker/rootfs/ /
-
-# Then copy esphome and install
-COPY . /opt/esphome/
-RUN pip3 install --no-cache-dir -e /opt/esphome
-
-# Build arguments
-ARG BUILD_VERSION=dev
-
-# Labels
-LABEL \
-    io.hass.name="ESPHome" \
-    io.hass.description="Manage and program ESP8266/ESP32 microcontrollers through YAML configuration files" \
-    io.hass.type="addon" \
-    io.hass.version=${BUILD_VERSION}

docker/Dockerfile.lint

@@ -1,10 +0,0 @@
-ARG BUILD_FROM=esphome/esphome-lint-base:latest
-FROM ${BUILD_FROM}
-
-COPY requirements.txt requirements_optional.txt requirements_test.txt docker/platformio_install_deps.py  platformio.ini /
-RUN \
-    pip3 install --no-cache-dir -r /requirements.txt -r /requirements_optional.txt -r /requirements_test.txt \
-    && /platformio_install_deps.py /platformio.ini
-
-VOLUME ["/esphome"]
-WORKDIR /esphome

docker/build.py

@@ -2,7 +2,7 @@
 from dataclasses import dataclass
 import subprocess
 import argparse
-import platform
+from platform import machine
 import shlex
 import re
 import sys
@@ -24,9 +24,6 @@ TYPE_LINT = 'lint'
 TYPES = [TYPE_DOCKER, TYPE_HA_ADDON, TYPE_LINT]
 
 
-BASE_VERSION = "3.6.0"
-
-
 parser = argparse.ArgumentParser()
 parser.add_argument("--tag", type=str, required=True, help="The main docker tag to push to. If a version number also adds latest and/or beta tag")
 parser.add_argument("--arch", choices=ARCHS, required=False, help="The architecture to build for")
@@ -34,27 +31,18 @@ parser.add_argument("--build-type", choices=TYPES, required=True, help="The type
 parser.add_argument("--dry-run", action="store_true", help="Don't run any commands, just print them")
 subparsers = parser.add_subparsers(help="Action to perform", dest="command", required=True)
 build_parser = subparsers.add_parser("build", help="Build the image")
-push_parser = subparsers.add_parser("push", help="Tag the already built image and push it to docker hub")
+build_parser.add_argument("--push", help="Also push the images", action="store_true")
+build_parser.add_argument("--load", help="Load the docker image locally", action="store_true")
 manifest_parser = subparsers.add_parser("manifest", help="Create a manifest from already pushed images")
 
 
-
-# only lists some possibilities, doesn't have to be perfect
-# https://stackoverflow.com/a/45125525
-UNAME_TO_ARCH = {
-    "x86_64": ARCH_AMD64,
-    "aarch64": ARCH_AARCH64,
-    "aarch64_be": ARCH_AARCH64,
-    "arm": ARCH_ARMV7,
-}
-
-
 @dataclass(frozen=True)
 class DockerParams:
-    build_from: str
     build_to: str
     manifest_to: str
-    dockerfile: str
+    baseimgtype: str
+    platform: str
+    target: str
 
     @classmethod
     def for_type_arch(cls, build_type, arch):
@@ -63,18 +51,28 @@ class DockerParams:
             TYPE_HA_ADDON: "esphome/esphome-hassio",
             TYPE_LINT: "esphome/esphome-lint"
         }[build_type]
-        build_from = f"ghcr.io/{prefix}-base-{arch}:{BASE_VERSION}"
         build_to = f"{prefix}-{arch}"
-        dockerfile = {
-            TYPE_DOCKER: "docker/Dockerfile",
-            TYPE_HA_ADDON: "docker/Dockerfile.hassio",
-            TYPE_LINT: "docker/Dockerfile.lint",
+        baseimgtype = {
+            TYPE_DOCKER: "docker",
+            TYPE_HA_ADDON: "hassio",
+            TYPE_LINT: "docker",
+        }[build_type]
+        platform = {
+            ARCH_AMD64: "linux/amd64",
+            ARCH_ARMV7: "linux/arm/v7",
+            ARCH_AARCH64: "linux/arm64",
+        }[arch]
+        target = {
+            TYPE_DOCKER: "docker",
+            TYPE_HA_ADDON: "hassio",
+            TYPE_LINT: "lint",
         }[build_type]
         return cls(
-            build_from=build_from,
             build_to=build_to,
             manifest_to=prefix,
-            dockerfile=dockerfile
+            baseimgtype=baseimgtype,
+            platform=platform,
+            target=target,
         )
 
 
@@ -112,46 +110,33 @@ def main():
         # 1. pull cache image
         params = DockerParams.for_type_arch(args.build_type, args.arch)
         cache_tag = {
-            CHANNEL_DEV: "dev",
-            CHANNEL_BETA: "beta",
-            CHANNEL_RELEASE: "latest",
+            CHANNEL_DEV: "cache-dev",
+            CHANNEL_BETA: "cache-beta",
+            CHANNEL_RELEASE: "cache-latest",
         }[channel]
         cache_img = f"ghcr.io/{params.build_to}:{cache_tag}"
-        run_command("docker", "pull", cache_img, ignore_error=True)
 
-        # 2. register QEMU binfmt (if not host arch)
-        is_native = UNAME_TO_ARCH.get(platform.machine()) == args.arch
-        if not is_native:
-            run_command(
-                "docker", "run", "--rm", "--privileged", "multiarch/qemu-user-static:5.2.0-2",
-                "--reset", "-p", "yes"
-            )
-
-        # 3. build
-        run_command(
-            "docker", "build",
-            "--build-arg", f"BUILD_FROM={params.build_from}",
-            "--build-arg", f"BUILD_VERSION={args.tag}",
-            "--tag", f"{params.build_to}:{args.tag}",
-            "--cache-from", cache_img,
-            "--file", params.dockerfile,
-            "."
-        )
-    elif args.command == "push":
-        params = DockerParams.for_type_arch(args.build_type, args.arch)
         imgs = [f"{params.build_to}:{tag}" for tag in tags_to_push]
         imgs += [f"ghcr.io/{params.build_to}:{tag}" for tag in tags_to_push]
-        src = imgs[0]
-        # 1. tag images
-        for img in imgs[1:]:
-            run_command(
-                "docker", "tag", src, img
-            )
-        # 2. push images
+
+        # 3. build
+        cmd = [
+            "docker", "buildx", "build",
+            "--build-arg", f"BASEIMGTYPE={params.baseimgtype}",
+            "--build-arg", f"BUILD_VERSION={args.tag}",
+            "--cache-from", f"type=registry,ref={cache_img}",
+            "--file", "docker/Dockerfile",
+            "--platform", params.platform,
+            "--target", params.target,
+        ]
         for img in imgs:
-            run_command(
-                "docker", "push", img
-            )
+            cmd += ["--tag", img]
+        if args.push:
+            cmd += ["--push", "--cache-to", f"type=registry,ref={cache_img},mode=max"]
+        if args.load:
+            cmd += ["--load"]
+
+        run_command(*cmd, ".")
     elif args.command == "manifest":
         manifest = DockerParams.for_type_arch(args.build_type, ARCH_AMD64).manifest_to
 

docker/docker_entrypoint.sh

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+# If /cache is mounted, use that as PIO's coredir
+# otherwise use path in /config (so that PIO packages aren't downloaded on each compile)
+
+if [[ -d /cache ]]; then
+    pio_cache_base=/cache/platformio
+else
+    pio_cache_base=/config/.esphome/platformio
+fi
+
+if [[ ! -d "${pio_cache_base}" ]]; then
+    echo "Creating cache directory ${pio_cache_base}"
+    echo "You can change this behavior by mounting a directory to the container's /cache directory."
+    mkdir -p "${pio_cache_base}"
+fi
+
+# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+# setting `core_dir` would therefore prevent pio from accessing
+export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
+
+exec esphome "$@"

docker/ha-addon-rootfs/etc/cont-init.d/10-requirements.sh

@@ -7,12 +7,12 @@
 # Check SSL requirements, if enabled
 if bashio::config.true 'ssl'; then
     if ! bashio::config.has_value 'certfile'; then
-        bashio::fatal 'SSL is enabled, but no certfile was specified.'
+        bashio::log.fatal 'SSL is enabled, but no certfile was specified.'
         bashio::exit.nok
     fi
 
     if ! bashio::config.has_value 'keyfile'; then
-        bashio::fatal 'SSL is enabled, but no keyfile was specified'
+        bashio::log.fatal 'SSL is enabled, but no keyfile was specified'
         bashio::exit.nok
     fi
 

docker/ha-addon-rootfs/etc/cont-init.d/30-dirs.sh

@@ -0,0 +1,9 @@
+#!/usr/bin/with-contenv bashio
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# This files creates all directories used by esphome
+# ==============================================================================
+
+pio_cache_base=/data/cache/platformio
+
+mkdir -p "${pio_cache_base}"

docker/ha-addon-rootfs/etc/nginx/servers/direct-ssl.disabled

@@ -10,7 +10,7 @@ server {
     ssl_certificate_key /ssl/%%keyfile%%;
 
     # Clear Hass.io Ingress header
-    proxy_set_header X-Hassio-Ingress "";
+    proxy_set_header X-HA-Ingress "";
 
     # Redirect http requests to https on the same port.
     # https://rageagainstshell.com/2016/11/redirect-http-to-https-on-the-same-port-in-nginx/

docker/ha-addon-rootfs/etc/nginx/servers/direct.disabled

@@ -4,7 +4,7 @@ server {
     include /etc/nginx/includes/server_params.conf;
     include /etc/nginx/includes/proxy_params.conf;
     # Clear Hass.io Ingress header
-    proxy_set_header X-Hassio-Ingress "";
+    proxy_set_header X-HA-Ingress "";
 
     location / {
         proxy_pass http://esphome;

docker/ha-addon-rootfs/etc/nginx/servers/ingress.conf

@@ -3,8 +3,8 @@ server {
 
     include /etc/nginx/includes/server_params.conf;
     include /etc/nginx/includes/proxy_params.conf;
-    # Set Hass.io Ingress header
-    proxy_set_header X-Hassio-Ingress "YES";
+    # Set Home Assistant Ingress header
+    proxy_set_header X-HA-Ingress "YES";
 
     location / {
         # Only allow from Hass.io supervisor

docker/ha-addon-rootfs/etc/services.d/esphome/run

@@ -4,7 +4,7 @@
 # Runs the ESPHome dashboard
 # ==============================================================================
 
-export ESPHOME_IS_HASSIO=true
+export ESPHOME_IS_HA_ADDON=true
 
 if bashio::config.true 'leave_front_door_open'; then
     export DISABLE_HA_AUTHENTICATION=true
@@ -22,5 +22,14 @@ if bashio::config.has_value 'relative_url'; then
     export ESPHOME_DASHBOARD_RELATIVE_URL=$(bashio::config 'relative_url')
 fi
 
+pio_cache_base=/data/cache/platformio
+# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+# setting `core_dir` would therefore prevent pio from accessing
+export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
+
+export PLATFORMIO_GLOBALLIB_DIR=/piolibs
+
 bashio::log.info "Starting ESPHome dashboard..."
-exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --hassio
+exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --ha-addon

docker/platformio_install_deps.py

@@ -3,18 +3,28 @@
 # all platformio libraries in the global storage
 
 import configparser
-import re
 import subprocess
 import sys
 
-config = configparser.ConfigParser()
+config = configparser.ConfigParser(inline_comment_prefixes=(';', ))
 config.read(sys.argv[1])
+
 libs = []
-for line in config['common']['lib_deps'].splitlines():
-    # Format: '1655@1.0.2  ; TinyGPSPlus (has name conflict)' (includes comment)
-    m = re.search(r'([a-zA-Z0-9-_/]+@[0-9\.]+)', line)
-    if m is None:
+# Extract from every lib_deps key in all sections
+for section in config.sections():
+    conf = config[section]
+    if "lib_deps" not in conf:
         continue
-    libs.append(m.group(1))
+    for lib_dep in conf["lib_deps"].splitlines():
+        if not lib_dep:
+            # Empty line or comment
+            continue
+        if lib_dep.startswith("${"):
+            # Extending from another section
+            continue
+        if "@" not in lib_dep:
+            # No version pinned, this is an internal lib
+            continue
+        libs.append(lib_dep)
 
 subprocess.check_call(['platformio', 'lib', '-g', 'install', *libs])

esphome/__main__.py

@@ -2,6 +2,7 @@ import argparse
 import functools
 import logging
 import os
+import re
 import sys
 from datetime import datetime
 
@@ -9,15 +10,19 @@ from esphome import const, writer, yaml_util
 import esphome.codegen as cg
 from esphome.config import iter_components, read_config, strip_default_ids
 from esphome.const import (
+    ALLOWED_NAME_CHARS,
     CONF_BAUD_RATE,
     CONF_BROKER,
     CONF_DEASSERT_RTS_DTR,
     CONF_LOGGER,
+    CONF_NAME,
     CONF_OTA,
     CONF_PASSWORD,
     CONF_PORT,
     CONF_ESPHOME,
     CONF_PLATFORMIO_OPTIONS,
+    CONF_SUBSTITUTIONS,
+    SECRETS_FILES,
 )
 from esphome.core import CORE, EsphomeError, coroutine
 from esphome.helpers import indent
@@ -72,7 +77,7 @@ def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api
         if default == "OTA":
             return CORE.address
     if show_mqtt and "mqtt" in CORE.config:
-        options.append(("MQTT ({})".format(CORE.config["mqtt"][CONF_BROKER]), "MQTT"))
+        options.append((f"MQTT ({CORE.config['mqtt'][CONF_BROKER]})", "MQTT"))
         if default == "OTA":
             return "MQTT"
     if default is not None:
@@ -144,6 +149,8 @@ def wrap_to_code(name, comp):
         if comp.config_schema is not None:
             conf_str = yaml_util.dump(conf)
             conf_str = conf_str.replace("//", "")
+            # remove tailing \ to avoid multi-line comment warning
+            conf_str = conf_str.replace("\\\n", "\n")
             cg.add(cg.LineComment(indent(conf_str)))
         await coro(conf)
 
@@ -180,16 +187,37 @@ def compile_program(args, config):
     from esphome import platformio_api
 
     _LOGGER.info("Compiling app...")
-    return platformio_api.run_compile(config, CORE.verbose)
+    rc = platformio_api.run_compile(config, CORE.verbose)
+    if rc != 0:
+        return rc
+    idedata = platformio_api.get_idedata(config)
+    return 0 if idedata is not None else 1
 
 
 def upload_using_esptool(config, port):
-    path = CORE.firmware_bin
+    from esphome import platformio_api
+
     first_baudrate = config[CONF_ESPHOME][CONF_PLATFORMIO_OPTIONS].get(
         "upload_speed", 460800
     )
 
     def run_esptool(baud_rate):
+        idedata = platformio_api.get_idedata(config)
+
+        firmware_offset = "0x10000" if CORE.is_esp32 else "0x0"
+        flash_images = [
+            platformio_api.FlashImage(
+                path=idedata.firmware_bin_path, offset=firmware_offset
+            ),
+            *idedata.extra_flash_images,
+        ]
+
+        mcu = "esp8266"
+        if CORE.is_esp32:
+            from esphome.components.esp32 import get_esp32_variant
+
+            mcu = get_esp32_variant().lower()
+
         cmd = [
             "esptool.py",
             "--before",
@@ -198,14 +226,17 @@ def upload_using_esptool(config, port):
             "hard_reset",
             "--baud",
             str(baud_rate),
-            "--chip",
-            "esp8266",
             "--port",
             port,
+            "--chip",
+            mcu,
             "write_flash",
-            "0x0",
-            path,
+            "-z",
+            "--flash_size",
+            "detect",
         ]
+        for img in flash_images:
+            cmd += [img.offset, img.path]
 
         if os.environ.get("ESPHOME_USE_SUBPROCESS") is None:
             import esptool
@@ -229,11 +260,7 @@ def upload_using_esptool(config, port):
 def upload_program(config, args, host):
     # if upload is to a serial port use platformio, otherwise assume ota
     if get_port_type(host) == "SERIAL":
-        from esphome import platformio_api
-
-        if CORE.is_esp8266:
-            return upload_using_esptool(config, host)
-        return platformio_api.run_upload(config, CORE.verbose, host)
+        return upload_using_esptool(config, host)
 
     from esphome import espota2
 
@@ -245,7 +272,7 @@ def upload_program(config, args, host):
 
     ota_conf = config[CONF_OTA]
     remote_port = ota_conf[CONF_PORT]
-    password = ota_conf[CONF_PASSWORD]
+    password = ota_conf.get(CONF_PASSWORD, "")
     return espota2.run_ota(host, remote_port, password, CORE.firmware_bin)
 
 
@@ -256,7 +283,7 @@ def show_logs(config, args, port):
         run_miniterm(config, port)
         return 0
     if get_port_type(port) == "NETWORK" and "api" in config:
-        from esphome.api.client import run_logs
+        from esphome.components.api.client import run_logs
 
         return run_logs(config, port)
     if get_port_type(port) == "MQTT" and "mqtt" in config:
@@ -415,34 +442,141 @@ def command_update_all(args):
         click.echo(f"{half_line}{middle_text}{half_line}")
 
     for f in files:
-        print("Updating {}".format(color(Fore.CYAN, f)))
+        print(f"Updating {color(Fore.CYAN, f)}")
         print("-" * twidth)
         print()
         rc = run_external_process(
             "esphome", "--dashboard", "run", f, "--no-logs", "--device", "OTA"
         )
         if rc == 0:
-            print_bar("[{}] {}".format(color(Fore.BOLD_GREEN, "SUCCESS"), f))
+            print_bar(f"[{color(Fore.BOLD_GREEN, 'SUCCESS')}] {f}")
             success[f] = True
         else:
-            print_bar("[{}] {}".format(color(Fore.BOLD_RED, "ERROR"), f))
+            print_bar(f"[{color(Fore.BOLD_RED, 'ERROR')}] {f}")
             success[f] = False
 
         print()
         print()
         print()
 
-    print_bar("[{}]".format(color(Fore.BOLD_WHITE, "SUMMARY")))
+    print_bar(f"[{color(Fore.BOLD_WHITE, 'SUMMARY')}]")
     failed = 0
     for f in files:
         if success[f]:
-            print("  - {}: {}".format(f, color(Fore.GREEN, "SUCCESS")))
+            print(f"  - {f}: {color(Fore.GREEN, 'SUCCESS')}")
         else:
-            print("  - {}: {}".format(f, color(Fore.BOLD_RED, "FAILED")))
+            print(f"  - {f}: {color(Fore.BOLD_RED, 'FAILED')}")
             failed += 1
     return failed
 
 
+def command_idedata(args, config):
+    from esphome import platformio_api
+    import json
+
+    logging.disable(logging.INFO)
+    logging.disable(logging.WARNING)
+
+    idedata = platformio_api.get_idedata(config)
+    if idedata is None:
+        return 1
+
+    print(json.dumps(idedata.raw, indent=2) + "\n")
+    return 0
+
+
+def command_rename(args, config):
+    for c in args.name:
+        if c not in ALLOWED_NAME_CHARS:
+            print(
+                color(
+                    Fore.BOLD_RED,
+                    f"'{c}' is an invalid character for names. Valid characters are: "
+                    f"{ALLOWED_NAME_CHARS} (lowercase, no spaces)",
+                )
+            )
+            return 1
+    # Load existing yaml file
+    with open(CORE.config_path, mode="r+", encoding="utf-8") as raw_file:
+        raw_contents = raw_file.read()
+
+    yaml = yaml_util.load_yaml(CORE.config_path)
+    if CONF_ESPHOME not in yaml or CONF_NAME not in yaml[CONF_ESPHOME]:
+        print(
+            color(Fore.BOLD_RED, "Complex YAML files cannot be automatically renamed.")
+        )
+        return 1
+    old_name = yaml[CONF_ESPHOME][CONF_NAME]
+    match = re.match(r"^\$\{?([a-zA-Z0-9_]+)\}?$", old_name)
+    if match is None:
+        new_raw = re.sub(
+            rf"name:\s+[\"']?{old_name}[\"']?",
+            f'name: "{args.name}"',
+            raw_contents,
+        )
+    else:
+        old_name = yaml[CONF_SUBSTITUTIONS][match.group(1)]
+        if (
+            len(
+                re.findall(
+                    rf"^\s+{match.group(1)}:\s+[\"']?{old_name}[\"']?",
+                    raw_contents,
+                    flags=re.MULTILINE,
+                )
+            )
+            > 1
+        ):
+            print(color(Fore.BOLD_RED, "Too many matches in YAML to safely rename"))
+            return 1
+
+        new_raw = re.sub(
+            rf"^(\s+{match.group(1)}):\s+[\"']?{old_name}[\"']?",
+            f'\\1: "{args.name}"',
+            raw_contents,
+            flags=re.MULTILINE,
+        )
+
+    new_path = os.path.join(CORE.config_dir, args.name + ".yaml")
+    print(
+        f"Updating {color(Fore.CYAN, CORE.config_path)} to {color(Fore.CYAN, new_path)}"
+    )
+    print()
+
+    with open(new_path, mode="w", encoding="utf-8") as new_file:
+        new_file.write(new_raw)
+
+    rc = run_external_process("esphome", "config", new_path)
+    if rc != 0:
+        print(color(Fore.BOLD_RED, "Rename failed. Reverting changes."))
+        os.remove(new_path)
+        return 1
+
+    cli_args = [
+        "run",
+        new_path,
+        "--no-logs",
+        "--device",
+        CORE.address,
+    ]
+
+    if args.dashboard:
+        cli_args.insert(0, "--dashboard")
+
+    try:
+        rc = run_external_process("esphome", *cli_args)
+    except KeyboardInterrupt:
+        rc = 1
+    if rc != 0:
+        os.remove(new_path)
+        return 1
+
+    os.remove(CORE.config_path)
+
+    print(color(Fore.BOLD_GREEN, "SUCCESS"))
+    print()
+    return 0
+
+
 PRE_CONFIG_ACTIONS = {
     "wizard": command_wizard,
     "version": command_version,
@@ -460,6 +594,8 @@ POST_CONFIG_ACTIONS = {
     "clean-mqtt": command_clean_mqtt,
     "mqtt-fingerprint": command_mqtt_fingerprint,
     "clean": command_clean,
+    "idedata": command_idedata,
+    "rename": command_rename,
 }
 
 
@@ -483,75 +619,9 @@ def parse_args(argv):
         metavar=("key", "value"),
     )
 
-    # Keep backward compatibility with the old command line format of
-    # esphome <config> <command>.
-    #
-    # Unfortunately this can't be done by adding another configuration argument to the
-    # main config parser, as argparse is greedy when parsing arguments, so in regular
-    # usage it'll eat the command as the configuration argument and error out out
-    # because it can't parse the configuration as a command.
-    #
-    # Instead, construct an ad-hoc parser for the old format that doesn't actually
-    # process the arguments, but parses them enough to let us figure out if the old
-    # format is used. In that case, swap the command and configuration in the arguments
-    # and continue on with the normal parser (after raising a deprecation warning).
-    #
-    # Disable argparse's built-in help option and add it manually to prevent this
-    # parser from printing the help messagefor the old format when invoked with -h.
-    compat_parser = argparse.ArgumentParser(parents=[options_parser], add_help=False)
-    compat_parser.add_argument("-h", "--help")
-    compat_parser.add_argument("configuration", nargs="*")
-    compat_parser.add_argument(
-        "command",
-        choices=[
-            "config",
-            "compile",
-            "upload",
-            "logs",
-            "run",
-            "clean-mqtt",
-            "wizard",
-            "mqtt-fingerprint",
-            "version",
-            "clean",
-            "dashboard",
-            "vscode",
-            "update-all",
-        ],
-    )
-
-    # on Python 3.9+ we can simply set exit_on_error=False in the constructor
-    def _raise(x):
-        raise argparse.ArgumentError(None, x)
-
-    compat_parser.error = _raise
-
-    deprecated_argv_suggestion = None
-
-    if ["dashboard", "config"] == argv[1:3] or ["version"] == argv[1:2]:
-        # this is most likely meant in new-style arg format. do not try compat parsing
-        pass
-    else:
-        try:
-            result, unparsed = compat_parser.parse_known_args(argv[1:])
-            last_option = len(argv) - len(unparsed) - 1 - len(result.configuration)
-            unparsed = [
-                "--device" if arg in ("--upload-port", "--serial-port") else arg
-                for arg in unparsed
-            ]
-            argv = (
-                argv[0:last_option] + [result.command] + result.configuration + unparsed
-            )
-            deprecated_argv_suggestion = argv
-        except argparse.ArgumentError:
-            # This is not an old-style command line, so we don't have to do anything.
-            pass
-
-    # And continue on with regular parsing
     parser = argparse.ArgumentParser(
         description=f"ESPHome v{const.__version__}", parents=[options_parser]
     )
-    parser.set_defaults(deprecated_argv_suggestion=deprecated_argv_suggestion)
 
     mqtt_options = argparse.ArgumentParser(add_help=False)
     mqtt_options.add_argument("--topic", help="Manually set the MQTT topic.")
@@ -636,10 +706,7 @@ def parse_args(argv):
         "wizard",
         help="A helpful setup wizard that will guide you through setting up ESPHome.",
     )
-    parser_wizard.add_argument(
-        "configuration",
-        help="Your YAML configuration file.",
-    )
+    parser_wizard.add_argument("configuration", help="Your YAML configuration file.")
 
     parser_fingerprint = subparsers.add_parser(
         "mqtt-fingerprint", help="Get the SSL fingerprint from a MQTT broker."
@@ -661,8 +728,7 @@ def parse_args(argv):
         "dashboard", help="Create a simple web server for a dashboard."
     )
     parser_dashboard.add_argument(
-        "configuration",
-        help="Your YAML configuration file directory.",
+        "configuration", help="Your YAML configuration file directory."
     )
     parser_dashboard.add_argument(
         "--port",
@@ -670,6 +736,12 @@ def parse_args(argv):
         type=int,
         default=6052,
     )
+    parser_dashboard.add_argument(
+        "--address",
+        help="The address to bind to.",
+        type=str,
+        default="0.0.0.0",
+    )
     parser_dashboard.add_argument(
         "--username",
         help="The optional username to require for authentication.",
@@ -686,7 +758,7 @@ def parse_args(argv):
         "--open-ui", help="Open the dashboard UI in a browser.", action="store_true"
     )
     parser_dashboard.add_argument(
-        "--hassio", help=argparse.SUPPRESS, action="store_true"
+        "--ha-addon", help=argparse.SUPPRESS, action="store_true"
     )
     parser_dashboard.add_argument(
         "--socket", help="Make the dashboard serve under a unix socket", type=str
@@ -701,26 +773,121 @@ def parse_args(argv):
         "configuration", help="Your YAML configuration file directories.", nargs="+"
     )
 
-    return parser.parse_args(argv[1:])
+    parser_idedata = subparsers.add_parser("idedata")
+    parser_idedata.add_argument(
+        "configuration", help="Your YAML configuration file(s).", nargs=1
+    )
+
+    parser_rename = subparsers.add_parser(
+        "rename",
+        help="Rename a device in YAML, compile the binary and upload it.",
+    )
+    parser_rename.add_argument(
+        "configuration", help="Your YAML configuration file.", nargs=1
+    )
+    parser_rename.add_argument("name", help="The new name for the device.", type=str)
+
+    # Keep backward compatibility with the old command line format of
+    # esphome <config> <command>.
+    #
+    # Unfortunately this can't be done by adding another configuration argument to the
+    # main config parser, as argparse is greedy when parsing arguments, so in regular
+    # usage it'll eat the command as the configuration argument and error out out
+    # because it can't parse the configuration as a command.
+    #
+    # Instead, if parsing using the current format fails, construct an ad-hoc parser
+    # that doesn't actually process the arguments, but parses them enough to let us
+    # figure out if the old format is used. In that case, swap the command and
+    # configuration in the arguments and retry with the normal parser (and raise
+    # a deprecation warning).
+    arguments = argv[1:]
+
+    # On Python 3.9+ we can simply set exit_on_error=False in the constructor
+    def _raise(x):
+        raise argparse.ArgumentError(None, x)
+
+    # First, try new-style parsing, but don't exit in case of failure
+    try:
+        # duplicate parser so that we can use the original one to raise errors later on
+        current_parser = argparse.ArgumentParser(add_help=False, parents=[parser])
+        current_parser.set_defaults(deprecated_argv_suggestion=None)
+        current_parser.error = _raise
+        return current_parser.parse_args(arguments)
+    except argparse.ArgumentError:
+        pass
+
+    # Second, try compat parsing and rearrange the command-line if it succeeds
+    # Disable argparse's built-in help option and add it manually to prevent this
+    # parser from printing the help messagefor the old format when invoked with -h.
+    compat_parser = argparse.ArgumentParser(parents=[options_parser], add_help=False)
+    compat_parser.add_argument("-h", "--help", action="store_true")
+    compat_parser.add_argument("configuration", nargs="*")
+    compat_parser.add_argument(
+        "command",
+        choices=[
+            "config",
+            "compile",
+            "upload",
+            "logs",
+            "run",
+            "clean-mqtt",
+            "wizard",
+            "mqtt-fingerprint",
+            "version",
+            "clean",
+            "dashboard",
+            "vscode",
+            "update-all",
+        ],
+    )
+
+    try:
+        compat_parser.error = _raise
+        result, unparsed = compat_parser.parse_known_args(argv[1:])
+        last_option = len(arguments) - len(unparsed) - 1 - len(result.configuration)
+        unparsed = [
+            "--device" if arg in ("--upload-port", "--serial-port") else arg
+            for arg in unparsed
+        ]
+        arguments = (
+            arguments[0:last_option]
+            + [result.command]
+            + result.configuration
+            + unparsed
+        )
+        deprecated_argv_suggestion = arguments
+    except argparse.ArgumentError:
+        # old-style parsing failed, don't suggest any argument
+        deprecated_argv_suggestion = None
+
+    # Finally, run the new-style parser again with the possibly swapped arguments,
+    # and let it error out if the command is unparsable.
+    parser.set_defaults(deprecated_argv_suggestion=deprecated_argv_suggestion)
+    return parser.parse_args(arguments)
 
 
 def run_esphome(argv):
     args = parse_args(argv)
     CORE.dashboard = args.dashboard
 
-    setup_log(args.verbose, args.quiet)
+    setup_log(
+        args.verbose,
+        args.quiet,
+        # Show timestamp for dashboard access logs
+        args.command == "dashboard",
+    )
     if args.deprecated_argv_suggestion is not None and args.command != "vscode":
         _LOGGER.warning(
             "Calling ESPHome with the configuration before the command is deprecated "
             "and will be removed in the future. "
         )
         _LOGGER.warning("Please instead use:")
-        _LOGGER.warning("   esphome %s", " ".join(args.deprecated_argv_suggestion[1:]))
+        _LOGGER.warning("   esphome %s", " ".join(args.deprecated_argv_suggestion))
 
-    if sys.version_info < (3, 7, 0):
+    if sys.version_info < (3, 8, 0):
         _LOGGER.error(
-            "You're running ESPHome with Python <3.7. ESPHome is no longer compatible "
-            "with this Python version. Please reinstall ESPHome with Python 3.7+"
+            "You're running ESPHome with Python <3.8. ESPHome is no longer compatible "
+            "with this Python version. Please reinstall ESPHome with Python 3.8+"
         )
         return 1
 
@@ -732,12 +899,16 @@ def run_esphome(argv):
             return 1
 
     for conf_path in args.configuration:
+        if any(os.path.basename(conf_path) == x for x in SECRETS_FILES):
+            _LOGGER.warning("Skipping secrets file %s", conf_path)
+            continue
+
         CORE.config_path = conf_path
         CORE.dashboard = args.dashboard
 
         config = read_config(dict(args.substitution) if args.substitution else {})
         if config is None:
-            return 1
+            return 2
         CORE.config = config
 
         if args.command not in POST_CONFIG_ACTIONS:

esphome/api/client.py

@@ -1,518 +0,0 @@
-from datetime import datetime
-import functools
-import logging
-import socket
-import threading
-import time
-
-# pylint: disable=unused-import
-from typing import Optional  # noqa
-from google.protobuf import message  # noqa
-
-from esphome import const
-import esphome.api.api_pb2 as pb
-from esphome.const import CONF_PASSWORD, CONF_PORT
-from esphome.core import EsphomeError
-from esphome.helpers import resolve_ip_address, indent
-from esphome.log import color, Fore
-from esphome.util import safe_print
-
-_LOGGER = logging.getLogger(__name__)
-
-
-class APIConnectionError(EsphomeError):
-    pass
-
-
-MESSAGE_TYPE_TO_PROTO = {
-    1: pb.HelloRequest,
-    2: pb.HelloResponse,
-    3: pb.ConnectRequest,
-    4: pb.ConnectResponse,
-    5: pb.DisconnectRequest,
-    6: pb.DisconnectResponse,
-    7: pb.PingRequest,
-    8: pb.PingResponse,
-    9: pb.DeviceInfoRequest,
-    10: pb.DeviceInfoResponse,
-    11: pb.ListEntitiesRequest,
-    12: pb.ListEntitiesBinarySensorResponse,
-    13: pb.ListEntitiesCoverResponse,
-    14: pb.ListEntitiesFanResponse,
-    15: pb.ListEntitiesLightResponse,
-    16: pb.ListEntitiesSensorResponse,
-    17: pb.ListEntitiesSwitchResponse,
-    18: pb.ListEntitiesTextSensorResponse,
-    19: pb.ListEntitiesDoneResponse,
-    20: pb.SubscribeStatesRequest,
-    21: pb.BinarySensorStateResponse,
-    22: pb.CoverStateResponse,
-    23: pb.FanStateResponse,
-    24: pb.LightStateResponse,
-    25: pb.SensorStateResponse,
-    26: pb.SwitchStateResponse,
-    27: pb.TextSensorStateResponse,
-    28: pb.SubscribeLogsRequest,
-    29: pb.SubscribeLogsResponse,
-    30: pb.CoverCommandRequest,
-    31: pb.FanCommandRequest,
-    32: pb.LightCommandRequest,
-    33: pb.SwitchCommandRequest,
-    34: pb.SubscribeServiceCallsRequest,
-    35: pb.ServiceCallResponse,
-    36: pb.GetTimeRequest,
-    37: pb.GetTimeResponse,
-}
-
-
-def _varuint_to_bytes(value):
-    if value <= 0x7F:
-        return bytes([value])
-
-    ret = bytes()
-    while value:
-        temp = value & 0x7F
-        value >>= 7
-        if value:
-            ret += bytes([temp | 0x80])
-        else:
-            ret += bytes([temp])
-
-    return ret
-
-
-def _bytes_to_varuint(value):
-    result = 0
-    bitpos = 0
-    for val in value:
-        result |= (val & 0x7F) << bitpos
-        bitpos += 7
-        if (val & 0x80) == 0:
-            return result
-    return None
-
-
-# pylint: disable=too-many-instance-attributes,not-callable
-class APIClient(threading.Thread):
-    def __init__(self, address, port, password):
-        threading.Thread.__init__(self)
-        self._address = address  # type: str
-        self._port = port  # type: int
-        self._password = password  # type: Optional[str]
-        self._socket = None  # type: Optional[socket.socket]
-        self._socket_open_event = threading.Event()
-        self._socket_write_lock = threading.Lock()
-        self._connected = False
-        self._authenticated = False
-        self._message_handlers = []
-        self._keepalive = 5
-        self._ping_timer = None
-
-        self.on_disconnect = None
-        self.on_connect = None
-        self.on_login = None
-        self.auto_reconnect = False
-        self._running_event = threading.Event()
-        self._stop_event = threading.Event()
-
-    @property
-    def stopped(self):
-        return self._stop_event.is_set()
-
-    def _refresh_ping(self):
-        if self._ping_timer is not None:
-            self._ping_timer.cancel()
-            self._ping_timer = None
-
-        def func():
-            self._ping_timer = None
-
-            if self._connected:
-                try:
-                    self.ping()
-                except APIConnectionError as err:
-                    self._fatal_error(err)
-                else:
-                    self._refresh_ping()
-
-        self._ping_timer = threading.Timer(self._keepalive, func)
-        self._ping_timer.start()
-
-    def _cancel_ping(self):
-        if self._ping_timer is not None:
-            self._ping_timer.cancel()
-            self._ping_timer = None
-
-    def _close_socket(self):
-        self._cancel_ping()
-        if self._socket is not None:
-            self._socket.close()
-            self._socket = None
-        self._socket_open_event.clear()
-        self._connected = False
-        self._authenticated = False
-        self._message_handlers = []
-
-    def stop(self, force=False):
-        if self.stopped:
-            raise ValueError
-
-        if self._connected and not force:
-            try:
-                self.disconnect()
-            except APIConnectionError:
-                pass
-        self._close_socket()
-
-        self._stop_event.set()
-        if not force:
-            self.join()
-
-    def connect(self):
-        if not self._running_event.wait(0.1):
-            raise APIConnectionError("You need to call start() first!")
-
-        if self._connected:
-            self.disconnect(on_disconnect=False)
-
-        try:
-            ip = resolve_ip_address(self._address)
-        except EsphomeError as err:
-            _LOGGER.warning(
-                "Error resolving IP address of %s. Is it connected to WiFi?",
-                self._address,
-            )
-            _LOGGER.warning(
-                "(If this error persists, please set a static IP address: "
-                "https://esphome.io/components/wifi.html#manual-ips)"
-            )
-            raise APIConnectionError(err) from err
-
-        _LOGGER.info("Connecting to %s:%s (%s)", self._address, self._port, ip)
-        self._socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-        self._socket.settimeout(10.0)
-        self._socket.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
-        try:
-            self._socket.connect((ip, self._port))
-        except OSError as err:
-            err = APIConnectionError(f"Error connecting to {ip}: {err}")
-            self._fatal_error(err)
-            raise err
-        self._socket.settimeout(0.1)
-
-        self._socket_open_event.set()
-
-        hello = pb.HelloRequest()
-        hello.client_info = f"ESPHome v{const.__version__}"
-        try:
-            resp = self._send_message_await_response(hello, pb.HelloResponse)
-        except APIConnectionError as err:
-            self._fatal_error(err)
-            raise err
-        _LOGGER.debug(
-            "Successfully connected to %s ('%s' API=%s.%s)",
-            self._address,
-            resp.server_info,
-            resp.api_version_major,
-            resp.api_version_minor,
-        )
-        self._connected = True
-        self._refresh_ping()
-        if self.on_connect is not None:
-            self.on_connect()
-
-    def _check_connected(self):
-        if not self._connected:
-            err = APIConnectionError("Must be connected!")
-            self._fatal_error(err)
-            raise err
-
-    def login(self):
-        self._check_connected()
-        if self._authenticated:
-            raise APIConnectionError("Already logged in!")
-
-        connect = pb.ConnectRequest()
-        if self._password is not None:
-            connect.password = self._password
-        resp = self._send_message_await_response(connect, pb.ConnectResponse)
-        if resp.invalid_password:
-            raise APIConnectionError("Invalid password!")
-
-        self._authenticated = True
-        if self.on_login is not None:
-            self.on_login()
-
-    def _fatal_error(self, err):
-        was_connected = self._connected
-
-        self._close_socket()
-
-        if was_connected and self.on_disconnect is not None:
-            self.on_disconnect(err)
-
-    def _write(self, data):  # type: (bytes) -> None
-        if self._socket is None:
-            raise APIConnectionError("Socket closed")
-
-        # _LOGGER.debug("Write: %s", format_bytes(data))
-        with self._socket_write_lock:
-            try:
-                self._socket.sendall(data)
-            except OSError as err:
-                err = APIConnectionError(f"Error while writing data: {err}")
-                self._fatal_error(err)
-                raise err
-
-    def _send_message(self, msg):
-        # type: (message.Message) -> None
-        for message_type, klass in MESSAGE_TYPE_TO_PROTO.items():
-            if isinstance(msg, klass):
-                break
-        else:
-            raise ValueError
-
-        encoded = msg.SerializeToString()
-        _LOGGER.debug("Sending %s:\n%s", type(msg), indent(str(msg)))
-        req = bytes([0])
-        req += _varuint_to_bytes(len(encoded))
-        req += _varuint_to_bytes(message_type)
-        req += encoded
-        self._write(req)
-
-    def _send_message_await_response_complex(
-        self, send_msg, do_append, do_stop, timeout=5
-    ):
-        event = threading.Event()
-        responses = []
-
-        def on_message(resp):
-            if do_append(resp):
-                responses.append(resp)
-            if do_stop(resp):
-                event.set()
-
-        self._message_handlers.append(on_message)
-        self._send_message(send_msg)
-        ret = event.wait(timeout)
-        try:
-            self._message_handlers.remove(on_message)
-        except ValueError:
-            pass
-        if not ret:
-            raise APIConnectionError("Timeout while waiting for message response!")
-        return responses
-
-    def _send_message_await_response(self, send_msg, response_type, timeout=5):
-        def is_response(msg):
-            return isinstance(msg, response_type)
-
-        return self._send_message_await_response_complex(
-            send_msg, is_response, is_response, timeout
-        )[0]
-
-    def device_info(self):
-        self._check_connected()
-        return self._send_message_await_response(
-            pb.DeviceInfoRequest(), pb.DeviceInfoResponse
-        )
-
-    def ping(self):
-        self._check_connected()
-        return self._send_message_await_response(pb.PingRequest(), pb.PingResponse)
-
-    def disconnect(self, on_disconnect=True):
-        self._check_connected()
-
-        try:
-            self._send_message_await_response(
-                pb.DisconnectRequest(), pb.DisconnectResponse
-            )
-        except APIConnectionError:
-            pass
-        self._close_socket()
-
-        if self.on_disconnect is not None and on_disconnect:
-            self.on_disconnect(None)
-
-    def _check_authenticated(self):
-        if not self._authenticated:
-            raise APIConnectionError("Must login first!")
-
-    def subscribe_logs(self, on_log, log_level=7, dump_config=False):
-        self._check_authenticated()
-
-        def on_msg(msg):
-            if isinstance(msg, pb.SubscribeLogsResponse):
-                on_log(msg)
-
-        self._message_handlers.append(on_msg)
-        req = pb.SubscribeLogsRequest(dump_config=dump_config)
-        req.level = log_level
-        self._send_message(req)
-
-    def _recv(self, amount):
-        ret = bytes()
-        if amount == 0:
-            return ret
-
-        while len(ret) < amount:
-            if self.stopped:
-                raise APIConnectionError("Stopped!")
-            if not self._socket_open_event.is_set():
-                raise APIConnectionError("No socket!")
-            try:
-                val = self._socket.recv(amount - len(ret))
-            except AttributeError as err:
-                raise APIConnectionError("Socket was closed") from err
-            except socket.timeout:
-                continue
-            except OSError as err:
-                raise APIConnectionError(f"Error while receiving data: {err}") from err
-            ret += val
-        return ret
-
-    def _recv_varint(self):
-        raw = bytes()
-        while not raw or raw[-1] & 0x80:
-            raw += self._recv(1)
-        return _bytes_to_varuint(raw)
-
-    def _run_once(self):
-        if not self._socket_open_event.wait(0.1):
-            return
-
-        # Preamble
-        if self._recv(1)[0] != 0x00:
-            raise APIConnectionError("Invalid preamble")
-
-        length = self._recv_varint()
-        msg_type = self._recv_varint()
-
-        raw_msg = self._recv(length)
-        if msg_type not in MESSAGE_TYPE_TO_PROTO:
-            _LOGGER.debug("Skipping message type %s", msg_type)
-            return
-
-        msg = MESSAGE_TYPE_TO_PROTO[msg_type]()
-        msg.ParseFromString(raw_msg)
-        _LOGGER.debug("Got message: %s:\n%s", type(msg), indent(str(msg)))
-        for msg_handler in self._message_handlers[:]:
-            msg_handler(msg)
-        self._handle_internal_messages(msg)
-
-    def run(self):
-        self._running_event.set()
-        while not self.stopped:
-            try:
-                self._run_once()
-            except APIConnectionError as err:
-                if self.stopped:
-                    break
-                if self._connected:
-                    _LOGGER.error("Error while reading incoming messages: %s", err)
-                    self._fatal_error(err)
-        self._running_event.clear()
-
-    def _handle_internal_messages(self, msg):
-        if isinstance(msg, pb.DisconnectRequest):
-            self._send_message(pb.DisconnectResponse())
-            if self._socket is not None:
-                self._socket.close()
-                self._socket = None
-            self._connected = False
-            if self.on_disconnect is not None:
-                self.on_disconnect(None)
-        elif isinstance(msg, pb.PingRequest):
-            self._send_message(pb.PingResponse())
-        elif isinstance(msg, pb.GetTimeRequest):
-            resp = pb.GetTimeResponse()
-            resp.epoch_seconds = int(time.time())
-            self._send_message(resp)
-
-
-def run_logs(config, address):
-    conf = config["api"]
-    port = conf[CONF_PORT]
-    password = conf[CONF_PASSWORD]
-    _LOGGER.info("Starting log output from %s using esphome API", address)
-
-    cli = APIClient(address, port, password)
-    stopping = False
-    retry_timer = []
-
-    has_connects = []
-
-    def try_connect(err, tries=0):
-        if stopping:
-            return
-
-        if err:
-            _LOGGER.warning("Disconnected from API: %s", err)
-
-        while retry_timer:
-            retry_timer.pop(0).cancel()
-
-        error = None
-        try:
-            cli.connect()
-            cli.login()
-        except APIConnectionError as err2:  # noqa
-            error = err2
-
-        if error is None:
-            _LOGGER.info("Successfully connected to %s", address)
-            return
-
-        wait_time = int(min(1.5 ** min(tries, 100), 30))
-        if not has_connects:
-            _LOGGER.warning(
-                "Initial connection failed. The ESP might not be connected "
-                "to WiFi yet (%s). Re-Trying in %s seconds",
-                error,
-                wait_time,
-            )
-        else:
-            _LOGGER.warning(
-                "Couldn't connect to API (%s). Trying to reconnect in %s seconds",
-                error,
-                wait_time,
-            )
-        timer = threading.Timer(
-            wait_time, functools.partial(try_connect, None, tries + 1)
-        )
-        timer.start()
-        retry_timer.append(timer)
-
-    def on_log(msg):
-        time_ = datetime.now().time().strftime("[%H:%M:%S]")
-        text = msg.message
-        if msg.send_failed:
-            text = color(
-                Fore.WHITE,
-                "(Message skipped because it was too big to fit in "
-                "TCP buffer - This is only cosmetic)",
-            )
-        safe_print(time_ + text)
-
-    def on_login():
-        try:
-            cli.subscribe_logs(on_log, dump_config=not has_connects)
-            has_connects.append(True)
-        except APIConnectionError:
-            cli.disconnect()
-
-    cli.on_disconnect = try_connect
-    cli.on_login = on_login
-    cli.start()
-
-    try:
-        try_connect(None)
-        while True:
-            time.sleep(1)
-    except KeyboardInterrupt:
-        stopping = True
-        cli.stop(True)
-        while retry_timer:
-            retry_timer.pop(0).cancel()
-    return 0

esphome/automation.py

@@ -3,14 +3,16 @@ import esphome.config_validation as cv
 from esphome.const import (
     CONF_AUTOMATION_ID,
     CONF_CONDITION,
+    CONF_COUNT,
     CONF_ELSE,
     CONF_ID,
     CONF_THEN,
+    CONF_TIMEOUT,
     CONF_TRIGGER_ID,
     CONF_TYPE_ID,
     CONF_TIME,
 )
-from esphome.jsonschema import jschema_extractor
+from esphome.schema_extractors import SCHEMA_EXTRACT, schema_extractor
 from esphome.util import Registry
 
 
@@ -21,11 +23,10 @@ def maybe_simple_id(*validators):
 def maybe_conf(conf, *validators):
     validator = cv.All(*validators)
 
-    @jschema_extractor("maybe")
+    @schema_extractor("maybe")
     def validate(value):
-        # pylint: disable=comparison-with-callable
-        if value == jschema_extractor:
-            return validator
+        if value == SCHEMA_EXTRACT:
+            return (validator, conf)
 
         if isinstance(value, dict):
             return validator(value)
@@ -65,6 +66,7 @@ DelayAction = cg.esphome_ns.class_("DelayAction", Action, cg.Component)
 LambdaAction = cg.esphome_ns.class_("LambdaAction", Action)
 IfAction = cg.esphome_ns.class_("IfAction", Action)
 WhileAction = cg.esphome_ns.class_("WhileAction", Action)
+RepeatAction = cg.esphome_ns.class_("RepeatAction", Action)
 WaitUntilAction = cg.esphome_ns.class_("WaitUntilAction", Action, cg.Component)
 UpdateComponentAction = cg.esphome_ns.class_("UpdateComponentAction", Action)
 Automation = cg.esphome_ns.class_("Automation")
@@ -108,11 +110,9 @@ def validate_automation(extra_schema=None, extra_validators=None, single=False):
         # This should only happen with invalid configs, but let's have a nice error message.
         return [schema(value)]
 
-    @jschema_extractor("automation")
+    @schema_extractor("automation")
     def validator(value):
-        # hack to get the schema
-        # pylint: disable=comparison-with-callable
-        if value == jschema_extractor:
+        if value == SCHEMA_EXTRACT:
             return schema
 
         value = validator_(value)
@@ -240,21 +240,41 @@ async def while_action_to_code(config, action_id, template_arg, args):
     return var
 
 
-def validate_wait_until(value):
-    schema = cv.Schema(
+@register_action(
+    "repeat",
+    RepeatAction,
+    cv.Schema(
         {
-            cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+            cv.Required(CONF_COUNT): cv.templatable(cv.positive_not_null_int),
+            cv.Required(CONF_THEN): validate_action_list,
         }
-    )
-    if isinstance(value, dict) and CONF_CONDITION in value:
-        return schema(value)
-    return validate_wait_until({CONF_CONDITION: value})
+    ),
+)
+async def repeat_action_to_code(config, action_id, template_arg, args):
+    var = cg.new_Pvariable(action_id, template_arg)
+    count_template = await cg.templatable(config[CONF_COUNT], args, cg.uint32)
+    cg.add(var.set_count(count_template))
+    actions = await build_action_list(config[CONF_THEN], template_arg, args)
+    cg.add(var.add_then(actions))
+    return var
 
 
-@register_action("wait_until", WaitUntilAction, validate_wait_until)
+_validate_wait_until = cv.maybe_simple_value(
+    {
+        cv.Required(CONF_CONDITION): validate_potentially_and_condition,
+        cv.Optional(CONF_TIMEOUT): cv.templatable(cv.positive_time_period_milliseconds),
+    },
+    key=CONF_CONDITION,
+)
+
+
+@register_action("wait_until", WaitUntilAction, _validate_wait_until)
 async def wait_until_action_to_code(config, action_id, template_arg, args):
     conditions = await build_condition(config[CONF_CONDITION], template_arg, args)
     var = cg.new_Pvariable(action_id, template_arg, conditions)
+    if CONF_TIMEOUT in config:
+        template_ = await cg.templatable(config[CONF_TIMEOUT], args, cg.uint32)
+        cg.add(var.set_timeout_value(template_))
     await cg.register_component(var, {})
     return var
 

esphome/codegen.py

@@ -30,6 +30,7 @@ from esphome.cpp_generator import (  # noqa
     add_library,
     add_build_flag,
     add_define,
+    add_platformio_option,
     get_variable,
     get_variable_with_full_id,
     process_lambda,
@@ -62,11 +63,13 @@ from esphome.cpp_types import (  # noqa
     uint32,
     uint64,
     int32,
+    int64,
+    size_t,
     const_char_ptr,
     NAN,
     esphome_ns,
     App,
-    Nameable,
+    EntityBase,
     Component,
     ComponentPtr,
     PollingComponent,
@@ -74,8 +77,11 @@ from esphome.cpp_types import (  # noqa
     optional,
     arduino_json_ns,
     JsonObject,
-    JsonObjectRef,
-    JsonObjectConstRef,
+    JsonObjectConst,
     Controller,
     GPIOPin,
+    InternalGPIOPin,
+    gpio_Flags,
+    EntityCategory,
+    Parented,
 )

esphome/components/a4988/a4988.h

@@ -1,7 +1,7 @@
 #pragma once
 
 #include "esphome/core/component.h"
-#include "esphome/core/esphal.h"
+#include "esphome/core/hal.h"
 #include "esphome/components/stepper/stepper.h"
 
 namespace esphome {

esphome/components/ac_dimmer/ac_dimmer.cpp

@@ -1,10 +1,16 @@
+#ifdef USE_ARDUINO
+
 #include "ac_dimmer.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include <cmath>
 
-#ifdef ARDUINO_ARCH_ESP8266
+#ifdef USE_ESP8266
 #include <core_esp8266_waveform.h>
 #endif
+#ifdef USE_ESP32_FRAMEWORK_ARDUINO
+#include <esp32-hal-timer.h>
+#endif
 
 namespace esphome {
 namespace ac_dimmer {
@@ -17,12 +23,15 @@ static AcDimmerDataStore *all_dimmers[32];  // NOLINT(cppcoreguidelines-avoid-no
 /// Time in microseconds the gate should be held high
 /// 10µs should be long enough for most triacs
 /// For reference: BT136 datasheet says 2µs nominal (page 7)
-static const uint32_t GATE_ENABLE_TIME = 10;
+/// However other factors like gate driver propagation time
+/// are also considered and a really low value is not important
+/// See also: https://github.com/esphome/issues/issues/1632
+static const uint32_t GATE_ENABLE_TIME = 50;
 
 /// Function called from timer interrupt
 /// Input is current time in microseconds (micros())
 /// Returns when next "event" is expected in µs, or 0 if no such event known.
-uint32_t ICACHE_RAM_ATTR HOT AcDimmerDataStore::timer_intr(uint32_t now) {
+uint32_t IRAM_ATTR HOT AcDimmerDataStore::timer_intr(uint32_t now) {
   // If no ZC signal received yet.
   if (this->crossed_zero_at == 0)
     return 0;
@@ -34,19 +43,19 @@ uint32_t ICACHE_RAM_ATTR HOT AcDimmerDataStore::timer_intr(uint32_t now) {
 
   if (this->enable_time_us != 0 && time_since_zc >= this->enable_time_us) {
     this->enable_time_us = 0;
-    this->gate_pin->digital_write(true);
+    this->gate_pin.digital_write(true);
     // Prevent too short pulses
-    this->disable_time_us = max(this->disable_time_us, time_since_zc + GATE_ENABLE_TIME);
+    this->disable_time_us = std::max(this->disable_time_us, time_since_zc + GATE_ENABLE_TIME);
   }
   if (this->disable_time_us != 0 && time_since_zc >= this->disable_time_us) {
     this->disable_time_us = 0;
-    this->gate_pin->digital_write(false);
+    this->gate_pin.digital_write(false);
   }
 
-  if (time_since_zc < this->enable_time_us)
+  if (time_since_zc < this->enable_time_us) {
     // Next event is enable, return time until that event
     return this->enable_time_us - time_since_zc;
-  else if (time_since_zc < disable_time_us) {
+  } else if (time_since_zc < disable_time_us) {
     // Next event is disable, return time until that event
     return this->disable_time_us - time_since_zc;
   }
@@ -60,14 +69,15 @@ uint32_t ICACHE_RAM_ATTR HOT AcDimmerDataStore::timer_intr(uint32_t now) {
 }
 
 /// Run timer interrupt code and return in how many µs the next event is expected
-uint32_t ICACHE_RAM_ATTR HOT timer_interrupt() {
+uint32_t IRAM_ATTR HOT timer_interrupt() {
   // run at least with 1kHz
   uint32_t min_dt_us = 1000;
   uint32_t now = micros();
   for (auto *dimmer : all_dimmers) {
-    if (dimmer == nullptr)
+    if (dimmer == nullptr) {
       // no more dimmers
       break;
+    }
     uint32_t res = dimmer->timer_intr(now);
     if (res != 0 && res < min_dt_us)
       min_dt_us = res;
@@ -77,7 +87,7 @@ uint32_t ICACHE_RAM_ATTR HOT timer_interrupt() {
 }
 
 /// GPIO interrupt routine, called when ZC pin triggers
-void ICACHE_RAM_ATTR HOT AcDimmerDataStore::gpio_intr() {
+void IRAM_ATTR HOT AcDimmerDataStore::gpio_intr() {
   uint32_t prev_crossed = this->crossed_zero_at;
 
   // 50Hz mains frequency should give a half cycle of 10ms a 60Hz will give 8.33ms
@@ -94,7 +104,7 @@ void ICACHE_RAM_ATTR HOT AcDimmerDataStore::gpio_intr() {
 
   if (this->value == 65535) {
     // fully on, enable output immediately
-    this->gate_pin->digital_write(true);
+    this->gate_pin.digital_write(true);
   } else if (this->init_cycle) {
     // send a full cycle
     this->init_cycle = false;
@@ -102,29 +112,33 @@ void ICACHE_RAM_ATTR HOT AcDimmerDataStore::gpio_intr() {
     this->disable_time_us = cycle_time_us;
   } else if (this->value == 0) {
     // fully off, disable output immediately
-    this->gate_pin->digital_write(false);
+    this->gate_pin.digital_write(false);
   } else {
     if (this->method == DIM_METHOD_TRAILING) {
       this->enable_time_us = 1;  // cannot be 0
-      this->disable_time_us = max((uint32_t) 10, this->value * this->cycle_time_us / 65535);
+      this->disable_time_us = std::max((uint32_t) 10, this->value * this->cycle_time_us / 65535);
     } else {
       // calculate time until enable in µs: (1.0-value)*cycle_time, but with integer arithmetic
       // also take into account min_power
       auto min_us = this->cycle_time_us * this->min_power / 1000;
-      this->enable_time_us = max((uint32_t) 1, ((65535 - this->value) * (this->cycle_time_us - min_us)) / 65535);
+      // calculate required value to provide a true RMS voltage output
+      this->enable_time_us =
+          std::max((uint32_t) 1, (uint32_t)((65535 - (acos(1 - (2 * this->value / 65535.0)) / 3.14159 * 65535)) *
+                                            (this->cycle_time_us - min_us)) /
+                                     65535);
       if (this->method == DIM_METHOD_LEADING_PULSE) {
         // Minimum pulse time should be enough for the triac to trigger when it is close to the ZC zone
         // this is for brightness near 99%
-        this->disable_time_us = max(this->enable_time_us + GATE_ENABLE_TIME, (uint32_t) cycle_time_us / 10);
+        this->disable_time_us = std::max(this->enable_time_us + GATE_ENABLE_TIME, (uint32_t) cycle_time_us / 10);
       } else {
-        this->gate_pin->digital_write(false);
+        this->gate_pin.digital_write(false);
         this->disable_time_us = this->cycle_time_us;
       }
     }
   }
 }
 
-void ICACHE_RAM_ATTR HOT AcDimmerDataStore::s_gpio_intr(AcDimmerDataStore *store) {
+void IRAM_ATTR HOT AcDimmerDataStore::s_gpio_intr(AcDimmerDataStore *store) {
   // Attaching pin interrupts on the same pin will override the previous interrupt
   // However, the user expects that multiple dimmers sharing the same ZC pin will work.
   // We solve this in a bit of a hacky way: On each pin interrupt, we check all dimmers
@@ -138,11 +152,11 @@ void ICACHE_RAM_ATTR HOT AcDimmerDataStore::s_gpio_intr(AcDimmerDataStore *store
   }
 }
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 // ESP32 implementation, uses basically the same code but needs to wrap
 // timer_interrupt() function to auto-reschedule
-static hw_timer_t *dimmer_timer = nullptr;
-void ICACHE_RAM_ATTR HOT AcDimmerDataStore::s_timer_intr() { timer_interrupt(); }
+static hw_timer_t *dimmer_timer = nullptr;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)
+void IRAM_ATTR HOT AcDimmerDataStore::s_timer_intr() { timer_interrupt(); }
 #endif
 
 void AcDimmer::setup() {
@@ -171,15 +185,16 @@ void AcDimmer::setup() {
   if (setup_zero_cross_pin) {
     this->zero_cross_pin_->setup();
     this->store_.zero_cross_pin = this->zero_cross_pin_->to_isr();
-    this->zero_cross_pin_->attach_interrupt(&AcDimmerDataStore::s_gpio_intr, &this->store_, FALLING);
+    this->zero_cross_pin_->attach_interrupt(&AcDimmerDataStore::s_gpio_intr, &this->store_,
+                                            gpio::INTERRUPT_FALLING_EDGE);
   }
 
-#ifdef ARDUINO_ARCH_ESP8266
+#ifdef USE_ESP8266
   // Uses ESP8266 waveform (soft PWM) class
   // PWM and AcDimmer can even run at the same time this way
   setTimer1Callback(&timer_interrupt);
 #endif
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
   // 80 Divider -> 1 count=1µs
   dimmer_timer = timerBegin(0, 80, true);
   timerAttachInterrupt(dimmer_timer, &AcDimmerDataStore::s_timer_intr, true);
@@ -202,12 +217,13 @@ void AcDimmer::dump_config() {
   LOG_PIN("  Zero-Cross Pin: ", this->zero_cross_pin_);
   ESP_LOGCONFIG(TAG, "   Min Power: %.1f%%", this->store_.min_power / 10.0f);
   ESP_LOGCONFIG(TAG, "   Init with half cycle: %s", YESNO(this->init_with_half_cycle_));
-  if (method_ == DIM_METHOD_LEADING_PULSE)
+  if (method_ == DIM_METHOD_LEADING_PULSE) {
     ESP_LOGCONFIG(TAG, "   Method: leading pulse");
-  else if (method_ == DIM_METHOD_LEADING)
+  } else if (method_ == DIM_METHOD_LEADING) {
     ESP_LOGCONFIG(TAG, "   Method: leading");
-  else
+  } else {
     ESP_LOGCONFIG(TAG, "   Method: trailing");
+  }
 
   LOG_FLOAT_OUTPUT(this);
   ESP_LOGV(TAG, "  Estimated Frequency: %.3fHz", 1e6f / this->store_.cycle_time_us / 2);
@@ -215,3 +231,5 @@ void AcDimmer::dump_config() {
 
 }  // namespace ac_dimmer
 }  // namespace esphome
+
+#endif  // USE_ARDUINO

esphome/components/ac_dimmer/ac_dimmer.h

@@ -1,7 +1,9 @@
 #pragma once
 
+#ifdef USE_ARDUINO
+
 #include "esphome/core/component.h"
-#include "esphome/core/esphal.h"
+#include "esphome/core/hal.h"
 #include "esphome/components/output/float_output.h"
 
 namespace esphome {
@@ -11,11 +13,11 @@ enum DimMethod { DIM_METHOD_LEADING_PULSE = 0, DIM_METHOD_LEADING, DIM_METHOD_TR
 
 struct AcDimmerDataStore {
   /// Zero-cross pin
-  ISRInternalGPIOPin *zero_cross_pin;
+  ISRInternalGPIOPin zero_cross_pin;
   /// Zero-cross pin number - used to share ZC pin across multiple dimmers
   uint8_t zero_cross_pin_number;
   /// Output pin to write to
-  ISRInternalGPIOPin *gate_pin;
+  ISRInternalGPIOPin gate_pin;
   /// Value of the dimmer - 0 to 65535.
   uint16_t value;
   /// Minimum power for activation
@@ -37,7 +39,7 @@ struct AcDimmerDataStore {
 
   void gpio_intr();
   static void s_gpio_intr(AcDimmerDataStore *store);
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
   static void s_timer_intr();
 #endif
 };
@@ -47,16 +49,16 @@ class AcDimmer : public output::FloatOutput, public Component {
   void setup() override;
 
   void dump_config() override;
-  void set_gate_pin(GPIOPin *gate_pin) { gate_pin_ = gate_pin; }
-  void set_zero_cross_pin(GPIOPin *zero_cross_pin) { zero_cross_pin_ = zero_cross_pin; }
+  void set_gate_pin(InternalGPIOPin *gate_pin) { gate_pin_ = gate_pin; }
+  void set_zero_cross_pin(InternalGPIOPin *zero_cross_pin) { zero_cross_pin_ = zero_cross_pin; }
   void set_init_with_half_cycle(bool init_with_half_cycle) { init_with_half_cycle_ = init_with_half_cycle; }
   void set_method(DimMethod method) { method_ = method; }
 
  protected:
   void write_state(float state) override;
 
-  GPIOPin *gate_pin_;
-  GPIOPin *zero_cross_pin_;
+  InternalGPIOPin *gate_pin_;
+  InternalGPIOPin *zero_cross_pin_;
   AcDimmerDataStore store_;
   bool init_with_half_cycle_;
   DimMethod method_;
@@ -64,3 +66,5 @@ class AcDimmer : public output::FloatOutput, public Component {
 
 }  // namespace ac_dimmer
 }  // namespace esphome
+
+#endif  // USE_ARDUINO

esphome/components/ac_dimmer/output.py

@@ -19,17 +19,20 @@ DIM_METHODS = {
 CONF_GATE_PIN = "gate_pin"
 CONF_ZERO_CROSS_PIN = "zero_cross_pin"
 CONF_INIT_WITH_HALF_CYCLE = "init_with_half_cycle"
-CONFIG_SCHEMA = output.FLOAT_OUTPUT_SCHEMA.extend(
-    {
-        cv.Required(CONF_ID): cv.declare_id(AcDimmer),
-        cv.Required(CONF_GATE_PIN): pins.internal_gpio_output_pin_schema,
-        cv.Required(CONF_ZERO_CROSS_PIN): pins.internal_gpio_input_pin_schema,
-        cv.Optional(CONF_INIT_WITH_HALF_CYCLE, default=True): cv.boolean,
-        cv.Optional(CONF_METHOD, default="leading pulse"): cv.enum(
-            DIM_METHODS, upper=True, space="_"
-        ),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = cv.All(
+    output.FLOAT_OUTPUT_SCHEMA.extend(
+        {
+            cv.Required(CONF_ID): cv.declare_id(AcDimmer),
+            cv.Required(CONF_GATE_PIN): pins.internal_gpio_output_pin_schema,
+            cv.Required(CONF_ZERO_CROSS_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Optional(CONF_INIT_WITH_HALF_CYCLE, default=True): cv.boolean,
+            cv.Optional(CONF_METHOD, default="leading pulse"): cv.enum(
+                DIM_METHODS, upper=True, space="_"
+            ),
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    cv.only_with_arduino,
+)
 
 
 async def to_code(config):

esphome/components/adalight/adalight_light_effect.cpp

@@ -25,7 +25,7 @@ void AdalightLightEffect::stop() {
   AddressableLightEffect::stop();
 }
 
-int AdalightLightEffect::get_frame_size_(int led_count) const {
+unsigned int AdalightLightEffect::get_frame_size_(int led_count) const {
   // 3 bytes: Ada
   // 2 bytes: LED count
   // 1 byte: checksum
@@ -44,6 +44,7 @@ void AdalightLightEffect::blank_all_leds_(light::AddressableLight &it) {
   for (int led = it.size(); led-- > 0;) {
     it[led].set(Color::BLACK);
   }
+  it.schedule_show();
 }
 
 void AdalightLightEffect::apply(light::AddressableLight &it, const Color &current_color) {
@@ -133,6 +134,7 @@ AdalightLightEffect::Frame AdalightLightEffect::parse_frame_(light::AddressableL
     it[led].set(Color(led_data[0], led_data[1], led_data[2], white));
   }
 
+  it.schedule_show();
   return CONSUMED;
 }
 

esphome/components/adalight/adalight_light_effect.h

@@ -13,7 +13,6 @@ class AdalightLightEffect : public light::AddressableLightEffect, public uart::U
  public:
   AdalightLightEffect(const std::string &name);
 
- public:
   void start() override;
   void stop() override;
   void apply(light::AddressableLight &it, const Color &current_color) override;
@@ -25,12 +24,11 @@ class AdalightLightEffect : public light::AddressableLightEffect, public uart::U
     CONSUMED,
   };
 
-  int get_frame_size_(int led_count) const;
+  unsigned int get_frame_size_(int led_count) const;
   void reset_frame_(light::AddressableLight &it);
   void blank_all_leds_(light::AddressableLight &it);
   Frame parse_frame_(light::AddressableLight &it);
 
- protected:
   uint32_t last_ack_{0};
   uint32_t last_byte_{0};
   uint32_t last_reset_{0};

esphome/components/adc/adc_sensor.cpp

@@ -1,8 +1,14 @@
 #include "adc_sensor.h"
 #include "esphome/core/log.h"
+#include "esphome/core/helpers.h"
 
+#ifdef USE_ESP8266
 #ifdef USE_ADC_SENSOR_VCC
+#include <Esp.h>
 ADC_MODE(ADC_VCC)
+#else
+#include <Arduino.h>
+#endif
 #endif
 
 namespace esphome {
@@ -10,151 +16,166 @@ namespace adc {
 
 static const char *const TAG = "adc";
 
-#ifdef ARDUINO_ARCH_ESP32
-void ADCSensor::set_attenuation(adc_atten_t attenuation) { this->attenuation_ = attenuation; }
+// 13bit for S2, and 12bit for all other esp32 variants
+#ifdef USE_ESP32
+static const adc_bits_width_t ADC_WIDTH_MAX_SOC_BITS = static_cast<adc_bits_width_t>(ADC_WIDTH_MAX - 1);
 
-inline adc1_channel_t gpio_to_adc1(uint8_t pin) {
-#if CONFIG_IDF_TARGET_ESP32
-  switch (pin) {
-    case 36:
-      return ADC1_CHANNEL_0;
-    case 37:
-      return ADC1_CHANNEL_1;
-    case 38:
-      return ADC1_CHANNEL_2;
-    case 39:
-      return ADC1_CHANNEL_3;
-    case 32:
-      return ADC1_CHANNEL_4;
-    case 33:
-      return ADC1_CHANNEL_5;
-    case 34:
-      return ADC1_CHANNEL_6;
-    case 35:
-      return ADC1_CHANNEL_7;
-    default:
-      return ADC1_CHANNEL_MAX;
-  }
-#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H2
-  switch (pin) {
-    case 0:
-      return ADC1_CHANNEL_0;
-    case 1:
-      return ADC1_CHANNEL_1;
-    case 2:
-      return ADC1_CHANNEL_2;
-    case 3:
-      return ADC1_CHANNEL_3;
-    case 4:
-      return ADC1_CHANNEL_4;
-    default:
-      return ADC1_CHANNEL_MAX;
-  }
+#ifndef SOC_ADC_RTC_MAX_BITWIDTH
+#if USE_ESP32_VARIANT_ESP32S2
+static const int SOC_ADC_RTC_MAX_BITWIDTH = 13;
+#else
+static const int SOC_ADC_RTC_MAX_BITWIDTH = 12;
 #endif
-}
+#endif
+
+static const int ADC_MAX = (1 << SOC_ADC_RTC_MAX_BITWIDTH) - 1;    // 4095 (12 bit) or 8191 (13 bit)
+static const int ADC_HALF = (1 << SOC_ADC_RTC_MAX_BITWIDTH) >> 1;  // 2048 (12 bit) or 4096 (13 bit)
 #endif
 
 void ADCSensor::setup() {
   ESP_LOGCONFIG(TAG, "Setting up ADC '%s'...", this->get_name().c_str());
 #ifndef USE_ADC_SENSOR_VCC
-  GPIOPin(this->pin_, INPUT).setup();
+  pin_->setup();
 #endif
 
-#ifdef ARDUINO_ARCH_ESP32
-  adc1_config_channel_atten(gpio_to_adc1(pin_), attenuation_);
-  adc1_config_width(ADC_WIDTH_BIT_12);
-#if !CONFIG_IDF_TARGET_ESP32C3 && !CONFIG_IDF_TARGET_ESP32H2
-  adc_gpio_init(ADC_UNIT_1, (adc_channel_t) gpio_to_adc1(pin_));
-#endif
-#endif
+#ifdef USE_ESP32
+  adc1_config_width(ADC_WIDTH_MAX_SOC_BITS);
+  if (!autorange_) {
+    adc1_config_channel_atten(channel_, attenuation_);
+  }
+
+  // load characteristics for each attenuation
+  for (int i = 0; i < (int) ADC_ATTEN_MAX; i++) {
+    auto cal_value = esp_adc_cal_characterize(ADC_UNIT_1, (adc_atten_t) i, ADC_WIDTH_MAX_SOC_BITS,
+                                              1100,  // default vref
+                                              &cal_characteristics_[i]);
+    switch (cal_value) {
+      case ESP_ADC_CAL_VAL_EFUSE_VREF:
+        ESP_LOGV(TAG, "Using eFuse Vref for calibration");
+        break;
+      case ESP_ADC_CAL_VAL_EFUSE_TP:
+        ESP_LOGV(TAG, "Using two-point eFuse Vref for calibration");
+        break;
+      case ESP_ADC_CAL_VAL_DEFAULT_VREF:
+      default:
+        break;
+    }
+  }
+
+#endif  // USE_ESP32
 }
+
 void ADCSensor::dump_config() {
   LOG_SENSOR("", "ADC Sensor", this);
-#ifdef ARDUINO_ARCH_ESP8266
+#ifdef USE_ESP8266
 #ifdef USE_ADC_SENSOR_VCC
   ESP_LOGCONFIG(TAG, "  Pin: VCC");
 #else
-  ESP_LOGCONFIG(TAG, "  Pin: %u", this->pin_);
+  LOG_PIN("  Pin: ", pin_);
 #endif
-#endif
-#ifdef ARDUINO_ARCH_ESP32
-  ESP_LOGCONFIG(TAG, "  Pin: %u", this->pin_);
-  switch (this->attenuation_) {
-    case ADC_ATTEN_DB_0:
-      ESP_LOGCONFIG(TAG, " Attenuation: 0db (max 1.1V)");
-      break;
-    case ADC_ATTEN_DB_2_5:
-      ESP_LOGCONFIG(TAG, " Attenuation: 2.5db (max 1.5V)");
-      break;
-    case ADC_ATTEN_DB_6:
-      ESP_LOGCONFIG(TAG, " Attenuation: 6db (max 2.2V)");
-      break;
-    case ADC_ATTEN_DB_11:
-      ESP_LOGCONFIG(TAG, " Attenuation: 11db (max 3.9V)");
-      break;
-    default:  // This is to satisfy the unused ADC_ATTEN_MAX
-      break;
+#endif  // USE_ESP8266
+
+#ifdef USE_ESP32
+  LOG_PIN("  Pin: ", pin_);
+  if (autorange_) {
+    ESP_LOGCONFIG(TAG, " Attenuation: auto");
+  } else {
+    switch (this->attenuation_) {
+      case ADC_ATTEN_DB_0:
+        ESP_LOGCONFIG(TAG, " Attenuation: 0db");
+        break;
+      case ADC_ATTEN_DB_2_5:
+        ESP_LOGCONFIG(TAG, " Attenuation: 2.5db");
+        break;
+      case ADC_ATTEN_DB_6:
+        ESP_LOGCONFIG(TAG, " Attenuation: 6db");
+        break;
+      case ADC_ATTEN_DB_11:
+        ESP_LOGCONFIG(TAG, " Attenuation: 11db");
+        break;
+      default:  // This is to satisfy the unused ADC_ATTEN_MAX
+        break;
+    }
   }
-#endif
+#endif  // USE_ESP32
   LOG_UPDATE_INTERVAL(this);
 }
+
 float ADCSensor::get_setup_priority() const { return setup_priority::DATA; }
 void ADCSensor::update() {
   float value_v = this->sample();
-  ESP_LOGD(TAG, "'%s': Got voltage=%.2fV", this->get_name().c_str(), value_v);
+  ESP_LOGV(TAG, "'%s': Got voltage=%.4fV", this->get_name().c_str(), value_v);
   this->publish_state(value_v);
 }
+
+#ifdef USE_ESP8266
 float ADCSensor::sample() {
-#ifdef ARDUINO_ARCH_ESP32
-  int raw = adc1_get_raw(gpio_to_adc1(pin_));
-  float value_v = raw / 4095.0f;
-#if CONFIG_IDF_TARGET_ESP32
-  switch (this->attenuation_) {
-    case ADC_ATTEN_DB_0:
-      value_v *= 1.1;
-      break;
-    case ADC_ATTEN_DB_2_5:
-      value_v *= 1.5;
-      break;
-    case ADC_ATTEN_DB_6:
-      value_v *= 2.2;
-      break;
-    case ADC_ATTEN_DB_11:
-      value_v *= 3.9;
-      break;
-    default:  // This is to satisfy the unused ADC_ATTEN_MAX
-      break;
-  }
-#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H2
-  switch (this->attenuation_) {
-    case ADC_ATTEN_DB_0:
-      value_v *= 0.84;
-      break;
-    case ADC_ATTEN_DB_2_5:
-      value_v *= 1.13;
-      break;
-    case ADC_ATTEN_DB_6:
-      value_v *= 1.56;
-      break;
-    case ADC_ATTEN_DB_11:
-      value_v *= 3.0;
-      break;
-    default:  // This is to satisfy the unused ADC_ATTEN_MAX
-      break;
-  }
+#ifdef USE_ADC_SENSOR_VCC
+  int raw = ESP.getVcc();  // NOLINT(readability-static-accessed-through-instance)
+#else
+  int raw = analogRead(this->pin_->get_pin());  // NOLINT
 #endif
-  return value_v;
+  if (output_raw_) {
+    return raw;
+  }
+  return raw / 1024.0f;
+}
 #endif
 
-#ifdef ARDUINO_ARCH_ESP8266
-#ifdef USE_ADC_SENSOR_VCC
-  return ESP.getVcc() / 1024.0f;
-#else
-  return analogRead(this->pin_) / 1024.0f;  // NOLINT
-#endif
-#endif
+#ifdef USE_ESP32
+float ADCSensor::sample() {
+  if (!autorange_) {
+    int raw = adc1_get_raw(channel_);
+    if (raw == -1) {
+      return NAN;
+    }
+    if (output_raw_) {
+      return raw;
+    }
+    uint32_t mv = esp_adc_cal_raw_to_voltage(raw, &cal_characteristics_[(int) attenuation_]);
+    return mv / 1000.0f;
+  }
+
+  int raw11, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
+  adc1_config_channel_atten(channel_, ADC_ATTEN_DB_11);
+  raw11 = adc1_get_raw(channel_);
+  if (raw11 < ADC_MAX) {
+    adc1_config_channel_atten(channel_, ADC_ATTEN_DB_6);
+    raw6 = adc1_get_raw(channel_);
+    if (raw6 < ADC_MAX) {
+      adc1_config_channel_atten(channel_, ADC_ATTEN_DB_2_5);
+      raw2 = adc1_get_raw(channel_);
+      if (raw2 < ADC_MAX) {
+        adc1_config_channel_atten(channel_, ADC_ATTEN_DB_0);
+        raw0 = adc1_get_raw(channel_);
+      }
+    }
+  }
+
+  if (raw0 == -1 || raw2 == -1 || raw6 == -1 || raw11 == -1) {
+    return NAN;
+  }
+
+  uint32_t mv11 = esp_adc_cal_raw_to_voltage(raw11, &cal_characteristics_[(int) ADC_ATTEN_DB_11]);
+  uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &cal_characteristics_[(int) ADC_ATTEN_DB_6]);
+  uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &cal_characteristics_[(int) ADC_ATTEN_DB_2_5]);
+  uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &cal_characteristics_[(int) ADC_ATTEN_DB_0]);
+
+  // Contribution of each value, in range 0-2048 (12 bit ADC) or 0-4096 (13 bit ADC)
+  uint32_t c11 = std::min(raw11, ADC_HALF);
+  uint32_t c6 = ADC_HALF - std::abs(raw6 - ADC_HALF);
+  uint32_t c2 = ADC_HALF - std::abs(raw2 - ADC_HALF);
+  uint32_t c0 = std::min(ADC_MAX - raw0, ADC_HALF);
+  // max theoretical csum value is 4096*4 = 16384
+  uint32_t csum = c11 + c6 + c2 + c0;
+
+  // each mv is max 3900; so max value is 3900*4096*4, fits in unsigned32
+  uint32_t mv_scaled = (mv11 * c11) + (mv6 * c6) + (mv2 * c2) + (mv0 * c0);
+  return mv_scaled / (float) (csum * 1000U);
 }
-#ifdef ARDUINO_ARCH_ESP8266
+#endif  // USE_ESP32
+
+#ifdef USE_ESP8266
 std::string ADCSensor::unique_id() { return get_mac_address() + "-adc"; }
 #endif
 

esphome/components/adc/adc_sensor.h

@@ -1,13 +1,14 @@
 #pragma once
 
 #include "esphome/core/component.h"
-#include "esphome/core/esphal.h"
+#include "esphome/core/hal.h"
 #include "esphome/core/defines.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 #include "driver/adc.h"
+#include <esp_adc_cal.h>
 #endif
 
 namespace esphome {
@@ -15,9 +16,11 @@ namespace adc {
 
 class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
  public:
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
   /// Set the attenuation for this pin. Only available on the ESP32.
-  void set_attenuation(adc_atten_t attenuation);
+  void set_attenuation(adc_atten_t attenuation) { attenuation_ = attenuation; }
+  void set_channel(adc1_channel_t channel) { channel_ = channel; }
+  void set_autorange(bool autorange) { autorange_ = autorange; }
 #endif
 
   /// Update adc values.
@@ -27,18 +30,23 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   void dump_config() override;
   /// `HARDWARE_LATE` setup priority.
   float get_setup_priority() const override;
-  void set_pin(uint8_t pin) { this->pin_ = pin; }
+  void set_pin(InternalGPIOPin *pin) { this->pin_ = pin; }
+  void set_output_raw(bool output_raw) { output_raw_ = output_raw; }
   float sample() override;
 
-#ifdef ARDUINO_ARCH_ESP8266
+#ifdef USE_ESP8266
   std::string unique_id() override;
 #endif
 
  protected:
-  uint8_t pin_;
+  InternalGPIOPin *pin_;
+  bool output_raw_{false};
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
   adc_atten_t attenuation_{ADC_ATTEN_DB_0};
+  adc1_channel_t channel_{};
+  bool autorange_{false};
+  esp_adc_cal_characteristics_t cal_characteristics_[(int) ADC_ATTEN_MAX] = {};
 #endif
 };
 

esphome/components/adc/sensor.py

@@ -4,12 +4,24 @@ from esphome import pins
 from esphome.components import sensor, voltage_sampler
 from esphome.const import (
     CONF_ATTENUATION,
+    CONF_RAW,
     CONF_ID,
+    CONF_INPUT,
+    CONF_NUMBER,
     CONF_PIN,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
 )
+from esphome.core import CORE
+from esphome.components.esp32 import get_esp32_variant
+from esphome.components.esp32.const import (
+    VARIANT_ESP32,
+    VARIANT_ESP32C3,
+    VARIANT_ESP32H2,
+    VARIANT_ESP32S2,
+    VARIANT_ESP32S3,
+)
 
 
 AUTO_LOAD = ["voltage_sampler"]
@@ -19,14 +31,99 @@ ATTENUATION_MODES = {
     "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
     "6db": cg.global_ns.ADC_ATTEN_DB_6,
     "11db": cg.global_ns.ADC_ATTEN_DB_11,
+    "auto": "auto",
+}
+
+adc1_channel_t = cg.global_ns.enum("adc1_channel_t")
+
+# From https://github.com/espressif/esp-idf/blob/master/components/driver/include/driver/adc_common.h
+# pin to adc1 channel mapping
+ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
+    VARIANT_ESP32: {
+        36: adc1_channel_t.ADC1_CHANNEL_0,
+        37: adc1_channel_t.ADC1_CHANNEL_1,
+        38: adc1_channel_t.ADC1_CHANNEL_2,
+        39: adc1_channel_t.ADC1_CHANNEL_3,
+        32: adc1_channel_t.ADC1_CHANNEL_4,
+        33: adc1_channel_t.ADC1_CHANNEL_5,
+        34: adc1_channel_t.ADC1_CHANNEL_6,
+        35: adc1_channel_t.ADC1_CHANNEL_7,
+    },
+    VARIANT_ESP32S2: {
+        1: adc1_channel_t.ADC1_CHANNEL_0,
+        2: adc1_channel_t.ADC1_CHANNEL_1,
+        3: adc1_channel_t.ADC1_CHANNEL_2,
+        4: adc1_channel_t.ADC1_CHANNEL_3,
+        5: adc1_channel_t.ADC1_CHANNEL_4,
+        6: adc1_channel_t.ADC1_CHANNEL_5,
+        7: adc1_channel_t.ADC1_CHANNEL_6,
+        8: adc1_channel_t.ADC1_CHANNEL_7,
+        9: adc1_channel_t.ADC1_CHANNEL_8,
+        10: adc1_channel_t.ADC1_CHANNEL_9,
+    },
+    VARIANT_ESP32S3: {
+        1: adc1_channel_t.ADC1_CHANNEL_0,
+        2: adc1_channel_t.ADC1_CHANNEL_1,
+        3: adc1_channel_t.ADC1_CHANNEL_2,
+        4: adc1_channel_t.ADC1_CHANNEL_3,
+        5: adc1_channel_t.ADC1_CHANNEL_4,
+        6: adc1_channel_t.ADC1_CHANNEL_5,
+        7: adc1_channel_t.ADC1_CHANNEL_6,
+        8: adc1_channel_t.ADC1_CHANNEL_7,
+        9: adc1_channel_t.ADC1_CHANNEL_8,
+        10: adc1_channel_t.ADC1_CHANNEL_9,
+    },
+    VARIANT_ESP32C3: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+    },
+    VARIANT_ESP32H2: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+    },
 }
 
 
 def validate_adc_pin(value):
-    vcc = str(value).upper()
-    if vcc == "VCC":
-        return cv.only_on_esp8266(vcc)
-    return pins.analog_pin(value)
+    if str(value).upper() == "VCC":
+        return cv.only_on_esp8266("VCC")
+
+    if CORE.is_esp32:
+        value = pins.internal_gpio_input_pin_number(value)
+        variant = get_esp32_variant()
+        if variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL:
+            raise cv.Invalid(f"This ESP32 variant ({variant}) is not supported")
+
+        if value not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]:
+            raise cv.Invalid(f"{variant} doesn't support ADC on this pin")
+        return pins.internal_gpio_input_pin_schema(value)
+
+    if CORE.is_esp8266:
+        from esphome.components.esp8266.gpio import CONF_ANALOG
+
+        value = pins.internal_gpio_pin_number({CONF_ANALOG: True, CONF_INPUT: True})(
+            value
+        )
+
+        if value != 17:  # A0
+            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC.")
+        return pins.gpio_pin_schema(
+            {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
+        )(value)
+
+    raise NotImplementedError
+
+
+def validate_config(config):
+    if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
+        raise cv.Invalid("Automatic attenuation cannot be used when raw output is set.")
+    return config
 
 
 adc_ns = cg.esphome_ns.namespace("adc")
@@ -34,8 +131,9 @@ ADCSensor = adc_ns.class_(
     "ADCSensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
 
-CONFIG_SCHEMA = (
+CONFIG_SCHEMA = cv.All(
     sensor.sensor_schema(
+        ADCSensor,
         unit_of_measurement=UNIT_VOLT,
         accuracy_decimals=2,
         device_class=DEVICE_CLASS_VOLTAGE,
@@ -43,14 +141,15 @@ CONFIG_SCHEMA = (
     )
     .extend(
         {
-            cv.GenerateID(): cv.declare_id(ADCSensor),
             cv.Required(CONF_PIN): validate_adc_pin,
+            cv.Optional(CONF_RAW, default=False): cv.boolean,
             cv.SplitDefault(CONF_ATTENUATION, esp32="0db"): cv.All(
                 cv.only_on_esp32, cv.enum(ATTENUATION_MODES, lower=True)
             ),
         }
     )
-    .extend(cv.polling_component_schema("60s"))
+    .extend(cv.polling_component_schema("60s")),
+    validate_config,
 )
 
 
@@ -62,7 +161,20 @@ async def to_code(config):
     if config[CONF_PIN] == "VCC":
         cg.add_define("USE_ADC_SENSOR_VCC")
     else:
-        cg.add(var.set_pin(config[CONF_PIN]))
+        pin = await cg.gpio_pin_expression(config[CONF_PIN])
+        cg.add(var.set_pin(pin))
+
+    if CONF_RAW in config:
+        cg.add(var.set_output_raw(config[CONF_RAW]))
 
     if CONF_ATTENUATION in config:
-        cg.add(var.set_attenuation(config[CONF_ATTENUATION]))
+        if config[CONF_ATTENUATION] == "auto":
+            cg.add(var.set_autorange(cg.global_ns.true))
+        else:
+            cg.add(var.set_attenuation(config[CONF_ATTENUATION]))
+
+    if CORE.is_esp32:
+        variant = get_esp32_variant()
+        pin_num = config[CONF_PIN][CONF_NUMBER]
+        chan = ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant][pin_num]
+        cg.add(var.set_channel(chan))

esphome/components/addressable_light/addressable_light_display.h

@@ -40,6 +40,8 @@ class AddressableLightDisplay : public display::DisplayBuffer, public PollingCom
   void setup() override;
   void display();
 
+  display::DisplayType get_display_type() override { return display::DisplayType::DISPLAY_TYPE_COLOR; }
+
  protected:
   int get_width_internal() override;
   int get_height_internal() override;

esphome/components/ade7953/ade7953.cpp

@@ -8,9 +8,7 @@ static const char *const TAG = "ade7953";
 
 void ADE7953::dump_config() {
   ESP_LOGCONFIG(TAG, "ADE7953:");
-  if (this->has_irq_) {
-    ESP_LOGCONFIG(TAG, "  IRQ Pin: GPIO%u", this->irq_pin_number_);
-  }
+  LOG_PIN("  IRQ Pin: ", irq_pin_);
   LOG_I2C_DEVICE(this);
   LOG_UPDATE_INTERVAL(this);
   LOG_SENSOR("  ", "Voltage Sensor", this->voltage_sensor_);
@@ -20,27 +18,28 @@ void ADE7953::dump_config() {
   LOG_SENSOR("  ", "Active Power B Sensor", this->active_power_b_sensor_);
 }
 
-#define ADE_PUBLISH_(name, factor) \
-  if ((name) && this->name##_sensor_) { \
-    float value = *(name) / (factor); \
+#define ADE_PUBLISH_(name, val, factor) \
+  if (err == i2c::ERROR_OK && this->name##_sensor_) { \
+    float value = (val) / (factor); \
     this->name##_sensor_->publish_state(value); \
   }
-#define ADE_PUBLISH(name, factor) ADE_PUBLISH_(name, factor)
+#define ADE_PUBLISH(name, val, factor) ADE_PUBLISH_(name, val, factor)
 
 void ADE7953::update() {
   if (!this->is_setup_)
     return;
 
-  auto active_power_a = this->ade_read_<int32_t>(0x0312);
-  ADE_PUBLISH(active_power_a, 154.0f);
-  auto active_power_b = this->ade_read_<int32_t>(0x0313);
-  ADE_PUBLISH(active_power_b, 154.0f);
-  auto current_a = this->ade_read_<uint32_t>(0x031A);
-  ADE_PUBLISH(current_a, 100000.0f);
-  auto current_b = this->ade_read_<uint32_t>(0x031B);
-  ADE_PUBLISH(current_b, 100000.0f);
-  auto voltage = this->ade_read_<uint32_t>(0x031C);
-  ADE_PUBLISH(voltage, 26000.0f);
+  uint32_t val;
+  i2c::ErrorCode err = ade_read_32_(0x0312, &val);
+  ADE_PUBLISH(active_power_a, (int32_t) val, 154.0f);
+  err = ade_read_32_(0x0313, &val);
+  ADE_PUBLISH(active_power_b, (int32_t) val, 154.0f);
+  err = ade_read_32_(0x031A, &val);
+  ADE_PUBLISH(current_a, (uint32_t) val, 100000.0f);
+  err = ade_read_32_(0x031B, &val);
+  ADE_PUBLISH(current_b, (uint32_t) val, 100000.0f);
+  err = ade_read_32_(0x031C, &val);
+  ADE_PUBLISH(voltage, (uint32_t) val, 26000.0f);
 
   //    auto apparent_power_a = this->ade_read_<int32_t>(0x0310);
   //    auto apparent_power_b = this->ade_read_<int32_t>(0x0311);

esphome/components/ade7953/ade7953.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "esphome/core/component.h"
+#include "esphome/core/hal.h"
 #include "esphome/components/i2c/i2c.h"
 #include "esphome/components/sensor/sensor.h"
 
@@ -9,10 +10,7 @@ namespace ade7953 {
 
 class ADE7953 : public i2c::I2CDevice, public PollingComponent {
  public:
-  void set_irq_pin(uint8_t irq_pin) {
-    has_irq_ = true;
-    irq_pin_number_ = irq_pin;
-  }
+  void set_irq_pin(InternalGPIOPin *irq_pin) { irq_pin_ = irq_pin; }
   void set_voltage_sensor(sensor::Sensor *voltage_sensor) { voltage_sensor_ = voltage_sensor; }
   void set_current_a_sensor(sensor::Sensor *current_a_sensor) { current_a_sensor_ = current_a_sensor; }
   void set_current_b_sensor(sensor::Sensor *current_b_sensor) { current_b_sensor_ = current_b_sensor; }
@@ -24,15 +22,13 @@ class ADE7953 : public i2c::I2CDevice, public PollingComponent {
   }
 
   void setup() override {
-    if (this->has_irq_) {
-      auto pin = GPIOPin(this->irq_pin_number_, INPUT);
-      this->irq_pin_ = &pin;
+    if (this->irq_pin_ != nullptr) {
       this->irq_pin_->setup();
     }
     this->set_timeout(100, [this]() {
-      this->ade_write_<uint8_t>(0x0010, 0x04);
-      this->ade_write_<uint8_t>(0x00FE, 0xAD);
-      this->ade_write_<uint16_t>(0x0120, 0x0030);
+      this->ade_write_8_(0x0010, 0x04);
+      this->ade_write_8_(0x00FE, 0xAD);
+      this->ade_write_16_(0x0120, 0x0030);
       this->is_setup_ = true;
     });
   }
@@ -42,31 +38,51 @@ class ADE7953 : public i2c::I2CDevice, public PollingComponent {
   void update() override;
 
  protected:
-  template<typename T> bool ade_write_(uint16_t reg, T value) {
+  i2c::ErrorCode ade_write_8_(uint16_t reg, uint8_t value) {
     std::vector<uint8_t> data;
     data.push_back(reg >> 8);
     data.push_back(reg >> 0);
-    for (int i = sizeof(T) - 1; i >= 0; i--)
-      data.push_back(value >> (i * 8));
-    return this->write_bytes_raw(data);
+    data.push_back(value);
+    return write(data.data(), data.size());
   }
-  template<typename T> optional<T> ade_read_(uint16_t reg) {
-    uint8_t hi = reg >> 8;
-    uint8_t lo = reg >> 0;
-    if (!this->write_bytes_raw({hi, lo}))
-      return {};
-    auto ret = this->read_bytes_raw<sizeof(T)>();
-    if (!ret.has_value())
-      return {};
-    T result = 0;
-    for (int i = 0, j = sizeof(T) - 1; i < sizeof(T); i++, j--)
-      result |= T((*ret)[i]) << (j * 8);
-    return result;
+  i2c::ErrorCode ade_write_16_(uint16_t reg, uint16_t value) {
+    std::vector<uint8_t> data;
+    data.push_back(reg >> 8);
+    data.push_back(reg >> 0);
+    data.push_back(value >> 8);
+    data.push_back(value >> 0);
+    return write(data.data(), data.size());
+  }
+  i2c::ErrorCode ade_write_32_(uint16_t reg, uint32_t value) {
+    std::vector<uint8_t> data;
+    data.push_back(reg >> 8);
+    data.push_back(reg >> 0);
+    data.push_back(value >> 24);
+    data.push_back(value >> 16);
+    data.push_back(value >> 8);
+    data.push_back(value >> 0);
+    return write(data.data(), data.size());
+  }
+  i2c::ErrorCode ade_read_32_(uint16_t reg, uint32_t *value) {
+    uint8_t reg_data[2];
+    reg_data[0] = reg >> 8;
+    reg_data[1] = reg >> 0;
+    i2c::ErrorCode err = write(reg_data, 2);
+    if (err != i2c::ERROR_OK)
+      return err;
+    uint8_t recv[4];
+    err = read(recv, 4);
+    if (err != i2c::ERROR_OK)
+      return err;
+    *value = 0;
+    *value |= ((uint32_t) recv[0]) << 24;
+    *value |= ((uint32_t) recv[1]) << 16;
+    *value |= ((uint32_t) recv[2]) << 8;
+    *value |= ((uint32_t) recv[3]);
+    return i2c::ERROR_OK;
   }
 
-  bool has_irq_ = false;
-  uint8_t irq_pin_number_;
-  GPIOPin *irq_pin_{nullptr};
+  InternalGPIOPin *irq_pin_ = nullptr;
   bool is_setup_{false};
   sensor::Sensor *voltage_sensor_{nullptr};
   sensor::Sensor *current_a_sensor_{nullptr};

esphome/components/ade7953/sensor.py

@@ -29,7 +29,7 @@ CONFIG_SCHEMA = (
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(ADE7953),
-            cv.Optional(CONF_IRQ_PIN): pins.input_pin,
+            cv.Optional(CONF_IRQ_PIN): pins.internal_gpio_input_pin_schema,
             cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(
                 unit_of_measurement=UNIT_VOLT,
                 accuracy_decimals=1,
@@ -73,7 +73,8 @@ async def to_code(config):
     await i2c.register_i2c_device(var, config)
 
     if CONF_IRQ_PIN in config:
-        cg.add(var.set_irq_pin(config[CONF_IRQ_PIN]))
+        irq_pin = await cg.gpio_pin_expression(config[CONF_IRQ_PIN])
+        cg.add(var.set_irq_pin(irq_pin))
 
     for key in [
         CONF_VOLTAGE,

esphome/components/ads1115/ads1115.cpp

@@ -1,5 +1,6 @@
 #include "ads1115.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 
 namespace esphome {
 namespace ads1115 {
@@ -159,7 +160,7 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
 float ADS1115Sensor::sample() { return this->parent_->request_measurement(this); }
 void ADS1115Sensor::update() {
   float v = this->parent_->request_measurement(this);
-  if (!isnan(v)) {
+  if (!std::isnan(v)) {
     ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
     this->publish_state(v);
   }

esphome/components/ads1115/sensor.py

@@ -52,6 +52,7 @@ ADS1115Sensor = ads1115_ns.class_(
 CONF_ADS1115_ID = "ads1115_id"
 CONFIG_SCHEMA = (
     sensor.sensor_schema(
+        ADS1115Sensor,
         unit_of_measurement=UNIT_VOLT,
         accuracy_decimals=3,
         device_class=DEVICE_CLASS_VOLTAGE,
@@ -59,7 +60,6 @@ CONFIG_SCHEMA = (
     )
     .extend(
         {
-            cv.GenerateID(): cv.declare_id(ADS1115Sensor),
             cv.GenerateID(CONF_ADS1115_ID): cv.use_id(ADS1115Component),
             cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
             cv.Required(CONF_GAIN): validate_gain,

esphome/components/aht10/aht10.cpp

@@ -14,6 +14,7 @@
 
 #include "aht10.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 
 namespace esphome {
 namespace aht10 {
@@ -33,8 +34,19 @@ void AHT10Component::setup() {
     this->mark_failed();
     return;
   }
-  uint8_t data;
-  if (!this->read_byte(0, &data, AHT10_DEFAULT_DELAY)) {
+  uint8_t data = 0;
+  if (this->write(&data, 1) != i2c::ERROR_OK) {
+    ESP_LOGD(TAG, "Communication with AHT10 failed!");
+    this->mark_failed();
+    return;
+  }
+  delay(AHT10_DEFAULT_DELAY);
+  if (this->read(&data, 1) != i2c::ERROR_OK) {
+    ESP_LOGD(TAG, "Communication with AHT10 failed!");
+    this->mark_failed();
+    return;
+  }
+  if (this->read(&data, 1) != i2c::ERROR_OK) {
     ESP_LOGD(TAG, "Communication with AHT10 failed!");
     this->mark_failed();
     return;
@@ -55,15 +67,19 @@ void AHT10Component::update() {
     return;
   }
   uint8_t data[6];
-  uint8_t delay = AHT10_DEFAULT_DELAY;
+  uint8_t delay_ms = AHT10_DEFAULT_DELAY;
   if (this->humidity_sensor_ != nullptr)
-    delay = AHT10_HUMIDITY_DELAY;
+    delay_ms = AHT10_HUMIDITY_DELAY;
+  bool success = false;
   for (int i = 0; i < AHT10_ATTEMPTS; ++i) {
-    ESP_LOGVV(TAG, "Attempt %u at %6ld", i, millis());
-    delay_microseconds_accurate(4);
-    if (!this->read_bytes(0, data, 6, delay)) {
+    ESP_LOGVV(TAG, "Attempt %d at %6u", i, millis());
+    delay(delay_ms);
+    if (this->read(data, 6) != i2c::ERROR_OK) {
       ESP_LOGD(TAG, "Communication with AHT10 failed, waiting...");
-    } else if ((data[0] & 0x80) == 0x80) {  // Bit[7] = 0b1, device is busy
+      continue;
+    }
+
+    if ((data[0] & 0x80) == 0x80) {  // Bit[7] = 0b1, device is busy
       ESP_LOGD(TAG, "AHT10 is busy, waiting...");
     } else if (data[1] == 0x0 && data[2] == 0x0 && (data[3] >> 4) == 0x0) {
       // Unrealistic humidity (0x0)
@@ -80,11 +96,12 @@ void AHT10Component::update() {
       }
     } else {
       // data is valid, we can break the loop
-      ESP_LOGVV(TAG, "Answer at %6ld", millis());
+      ESP_LOGVV(TAG, "Answer at %6u", millis());
+      success = true;
       break;
     }
   }
-  if ((data[0] & 0x80) == 0x80) {
+  if (!success || (data[0] & 0x80) == 0x80) {
     ESP_LOGE(TAG, "Measurements reading timed-out!");
     this->status_set_warning();
     return;
@@ -93,19 +110,19 @@ void AHT10Component::update() {
   uint32_t raw_temperature = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5];
   uint32_t raw_humidity = ((data[1] << 16) | (data[2] << 8) | data[3]) >> 4;
 
-  float temperature = ((200.0 * (float) raw_temperature) / 1048576.0) - 50.0;
+  float temperature = ((200.0f * (float) raw_temperature) / 1048576.0f) - 50.0f;
   float humidity;
   if (raw_humidity == 0) {  // unrealistic value
     humidity = NAN;
   } else {
-    humidity = (float) raw_humidity * 100.0 / 1048576.0;
+    humidity = (float) raw_humidity * 100.0f / 1048576.0f;
   }
 
   if (this->temperature_sensor_ != nullptr) {
     this->temperature_sensor_->publish_state(temperature);
   }
   if (this->humidity_sensor_ != nullptr) {
-    if (isnan(humidity))
+    if (std::isnan(humidity))
       ESP_LOGW(TAG, "Invalid humidity! Sensor reported 0%% Hum");
     this->humidity_sensor_->publish_state(humidity);
   }

esphome/components/airthings_ble/__init__.py

@@ -0,0 +1,23 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import esp32_ble_tracker
+from esphome.const import CONF_ID
+
+DEPENDENCIES = ["esp32_ble_tracker"]
+CODEOWNERS = ["@jeromelaban"]
+
+airthings_ble_ns = cg.esphome_ns.namespace("airthings_ble")
+AirthingsListener = airthings_ble_ns.class_(
+    "AirthingsListener", esp32_ble_tracker.ESPBTDeviceListener
+)
+
+CONFIG_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(AirthingsListener),
+    }
+).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
+
+
+def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    yield esp32_ble_tracker.register_ble_device(var, config)

esphome/components/airthings_ble/airthings_listener.cpp

@@ -0,0 +1,33 @@
+#include "airthings_listener.h"
+#include "esphome/core/log.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace airthings_ble {
+
+static const char *const TAG = "airthings_ble";
+
+bool AirthingsListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
+  for (auto &it : device.get_manufacturer_datas()) {
+    if (it.uuid == esp32_ble_tracker::ESPBTUUID::from_uint32(0x0334)) {
+      if (it.data.size() < 4)
+        continue;
+
+      uint32_t sn = it.data[0];
+      sn |= ((uint32_t) it.data[1] << 8);
+      sn |= ((uint32_t) it.data[2] << 16);
+      sn |= ((uint32_t) it.data[3] << 24);
+
+      ESP_LOGD(TAG, "Found AirThings device Serial:%u (MAC: %s)", sn, device.address_str().c_str());
+      return true;
+    }
+  }
+
+  return false;
+}
+
+}  // namespace airthings_ble
+}  // namespace esphome
+
+#endif

esphome/components/airthings_ble/airthings_listener.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#ifdef USE_ESP32
+
+#include "esphome/core/component.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+
+namespace esphome {
+namespace airthings_ble {
+
+class AirthingsListener : public esp32_ble_tracker::ESPBTDeviceListener {
+ public:
+  bool parse_device(const esp32_ble_tracker::ESPBTDevice &device) override;
+};
+
+}  // namespace airthings_ble
+}  // namespace esphome
+
+#endif

esphome/components/airthings_wave_mini/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@ncareau"]

esphome/components/airthings_wave_mini/airthings_wave_mini.cpp

@@ -0,0 +1,113 @@
+#include "airthings_wave_mini.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace airthings_wave_mini {
+
+static const char *const TAG = "airthings_wave_mini";
+
+void AirthingsWaveMini::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                                            esp_ble_gattc_cb_param_t *param) {
+  switch (event) {
+    case ESP_GATTC_OPEN_EVT: {
+      if (param->open.status == ESP_GATT_OK) {
+        ESP_LOGI(TAG, "Connected successfully!");
+      }
+      break;
+    }
+
+    case ESP_GATTC_DISCONNECT_EVT: {
+      ESP_LOGW(TAG, "Disconnected!");
+      break;
+    }
+
+    case ESP_GATTC_SEARCH_CMPL_EVT: {
+      this->handle_ = 0;
+      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
+      if (chr == nullptr) {
+        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
+                 sensors_data_characteristic_uuid_.to_string().c_str());
+        break;
+      }
+      this->handle_ = chr->handle;
+      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
+
+      request_read_values_();
+      break;
+    }
+
+    case ESP_GATTC_READ_CHAR_EVT: {
+      if (param->read.conn_id != this->parent()->conn_id)
+        break;
+      if (param->read.status != ESP_GATT_OK) {
+        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
+        break;
+      }
+      if (param->read.handle == this->handle_) {
+        read_sensors_(param->read.value, param->read.value_len);
+      }
+      break;
+    }
+
+    default:
+      break;
+  }
+}
+
+void AirthingsWaveMini::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
+  auto *value = (WaveMiniReadings *) raw_value;
+
+  if (sizeof(WaveMiniReadings) <= value_len) {
+    this->humidity_sensor_->publish_state(value->humidity / 100.0f);
+    this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+    this->temperature_sensor_->publish_state(value->temperature / 100.0f - 273.15f);
+    if (is_valid_voc_value_(value->voc)) {
+      this->tvoc_sensor_->publish_state(value->voc);
+    }
+
+    // This instance must not stay connected
+    // so other clients can connect to it (e.g. the
+    // mobile app).
+    parent()->set_enabled(false);
+  }
+}
+
+bool AirthingsWaveMini::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
+
+void AirthingsWaveMini::update() {
+  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
+    if (!parent()->enabled) {
+      ESP_LOGW(TAG, "Reconnecting to device");
+      parent()->set_enabled(true);
+      parent()->connect();
+    } else {
+      ESP_LOGW(TAG, "Connection in progress");
+    }
+  }
+}
+
+void AirthingsWaveMini::request_read_values_() {
+  auto status =
+      esp_ble_gattc_read_char(this->parent()->gattc_if, this->parent()->conn_id, this->handle_, ESP_GATT_AUTH_REQ_NONE);
+  if (status) {
+    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
+  }
+}
+
+void AirthingsWaveMini::dump_config() {
+  LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
+  LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
+  LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
+  LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
+}
+
+AirthingsWaveMini::AirthingsWaveMini()
+    : PollingComponent(10000),
+      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
+      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+
+}  // namespace airthings_wave_mini
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_mini/airthings_wave_mini.h

@@ -0,0 +1,65 @@
+#pragma once
+
+#ifdef USE_ESP32
+
+#include <esp_gattc_api.h>
+#include <algorithm>
+#include <iterator>
+#include "esphome/components/ble_client/ble_client.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace airthings_wave_mini {
+
+static const char *const SERVICE_UUID = "b42e3882-ade7-11e4-89d3-123b93f75cba";
+static const char *const CHARACTERISTIC_UUID = "b42e3b98-ade7-11e4-89d3-123b93f75cba";
+
+class AirthingsWaveMini : public PollingComponent, public ble_client::BLEClientNode {
+ public:
+  AirthingsWaveMini();
+
+  void dump_config() override;
+  void update() override;
+
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override;
+
+  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
+  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
+  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
+
+ protected:
+  bool is_valid_voc_value_(uint16_t voc);
+
+  void read_sensors_(uint8_t *value, uint16_t value_len);
+  void request_read_values_();
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+  sensor::Sensor *pressure_sensor_{nullptr};
+  sensor::Sensor *tvoc_sensor_{nullptr};
+
+  uint16_t handle_;
+  esp32_ble_tracker::ESPBTUUID service_uuid_;
+  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
+
+  struct WaveMiniReadings {
+    uint16_t unused01;
+    uint16_t temperature;
+    uint16_t pressure;
+    uint16_t humidity;
+    uint16_t voc;
+    uint16_t unused02;
+    uint32_t unused03;
+    uint32_t unused04;
+  };
+};
+
+}  // namespace airthings_wave_mini
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_mini/sensor.py

@@ -0,0 +1,82 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, ble_client
+
+from esphome.const import (
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_PRESSURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_PERCENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+    CONF_ID,
+    CONF_HUMIDITY,
+    CONF_TVOC,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    UNIT_PARTS_PER_BILLION,
+    ICON_RADIATOR,
+)
+
+DEPENDENCIES = ["ble_client"]
+
+airthings_wave_mini_ns = cg.esphome_ns.namespace("airthings_wave_mini")
+AirthingsWaveMini = airthings_wave_mini_ns.class_(
+    "AirthingsWaveMini", cg.PollingComponent, ble_client.BLEClientNode
+)
+
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AirthingsWaveMini),
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+                accuracy_decimals=2,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HECTOPASCAL,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_PRESSURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TVOC): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_BILLION,
+                icon=ICON_RADIATOR,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("5min"))
+    .extend(ble_client.BLE_CLIENT_SCHEMA),
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+
+    await ble_client.register_ble_node(var, config)
+
+    if CONF_HUMIDITY in config:
+        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_TEMPERATURE in config:
+        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_PRESSURE in config:
+        sens = await sensor.new_sensor(config[CONF_PRESSURE])
+        cg.add(var.set_pressure(sens))
+    if CONF_TVOC in config:
+        sens = await sensor.new_sensor(config[CONF_TVOC])
+        cg.add(var.set_tvoc(sens))

esphome/components/airthings_wave_plus/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@jeromelaban"]

esphome/components/airthings_wave_plus/airthings_wave_plus.cpp

@@ -0,0 +1,137 @@
+#include "airthings_wave_plus.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace airthings_wave_plus {
+
+static const char *const TAG = "airthings_wave_plus";
+
+void AirthingsWavePlus::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                                            esp_ble_gattc_cb_param_t *param) {
+  switch (event) {
+    case ESP_GATTC_OPEN_EVT: {
+      if (param->open.status == ESP_GATT_OK) {
+        ESP_LOGI(TAG, "Connected successfully!");
+      }
+      break;
+    }
+
+    case ESP_GATTC_DISCONNECT_EVT: {
+      ESP_LOGW(TAG, "Disconnected!");
+      break;
+    }
+
+    case ESP_GATTC_SEARCH_CMPL_EVT: {
+      this->handle_ = 0;
+      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
+      if (chr == nullptr) {
+        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
+                 sensors_data_characteristic_uuid_.to_string().c_str());
+        break;
+      }
+      this->handle_ = chr->handle;
+      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
+
+      request_read_values_();
+      break;
+    }
+
+    case ESP_GATTC_READ_CHAR_EVT: {
+      if (param->read.conn_id != this->parent()->conn_id)
+        break;
+      if (param->read.status != ESP_GATT_OK) {
+        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
+        break;
+      }
+      if (param->read.handle == this->handle_) {
+        read_sensors_(param->read.value, param->read.value_len);
+      }
+      break;
+    }
+
+    default:
+      break;
+  }
+}
+
+void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
+  auto *value = (WavePlusReadings *) raw_value;
+
+  if (sizeof(WavePlusReadings) <= value_len) {
+    ESP_LOGD(TAG, "version = %d", value->version);
+
+    if (value->version == 1) {
+      ESP_LOGD(TAG, "ambient light = %d", value->ambientLight);
+
+      this->humidity_sensor_->publish_state(value->humidity / 2.0f);
+      if (is_valid_radon_value_(value->radon)) {
+        this->radon_sensor_->publish_state(value->radon);
+      }
+      if (is_valid_radon_value_(value->radon_lt)) {
+        this->radon_long_term_sensor_->publish_state(value->radon_lt);
+      }
+      this->temperature_sensor_->publish_state(value->temperature / 100.0f);
+      this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+      if (is_valid_co2_value_(value->co2)) {
+        this->co2_sensor_->publish_state(value->co2);
+      }
+      if (is_valid_voc_value_(value->voc)) {
+        this->tvoc_sensor_->publish_state(value->voc);
+      }
+
+      // This instance must not stay connected
+      // so other clients can connect to it (e.g. the
+      // mobile app).
+      parent()->set_enabled(false);
+    } else {
+      ESP_LOGE(TAG, "Invalid payload version (%d != 1, newer version or not a Wave Plus?)", value->version);
+    }
+  }
+}
+
+bool AirthingsWavePlus::is_valid_radon_value_(uint16_t radon) { return 0 <= radon && radon <= 16383; }
+
+bool AirthingsWavePlus::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
+
+bool AirthingsWavePlus::is_valid_co2_value_(uint16_t co2) { return 0 <= co2 && co2 <= 16383; }
+
+void AirthingsWavePlus::update() {
+  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
+    if (!parent()->enabled) {
+      ESP_LOGW(TAG, "Reconnecting to device");
+      parent()->set_enabled(true);
+      parent()->connect();
+    } else {
+      ESP_LOGW(TAG, "Connection in progress");
+    }
+  }
+}
+
+void AirthingsWavePlus::request_read_values_() {
+  auto status =
+      esp_ble_gattc_read_char(this->parent()->gattc_if, this->parent()->conn_id, this->handle_, ESP_GATT_AUTH_REQ_NONE);
+  if (status) {
+    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
+  }
+}
+
+void AirthingsWavePlus::dump_config() {
+  LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
+  LOG_SENSOR("  ", "Radon", this->radon_sensor_);
+  LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
+  LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
+  LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
+  LOG_SENSOR("  ", "CO2", this->co2_sensor_);
+  LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
+}
+
+AirthingsWavePlus::AirthingsWavePlus()
+    : PollingComponent(10000),
+      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
+      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+
+}  // namespace airthings_wave_plus
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_plus/airthings_wave_plus.h

@@ -0,0 +1,75 @@
+#pragma once
+
+#ifdef USE_ESP32
+
+#include <esp_gattc_api.h>
+#include <algorithm>
+#include <iterator>
+#include "esphome/components/ble_client/ble_client.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace airthings_wave_plus {
+
+static const char *const SERVICE_UUID = "b42e1c08-ade7-11e4-89d3-123b93f75cba";
+static const char *const CHARACTERISTIC_UUID = "b42e2a68-ade7-11e4-89d3-123b93f75cba";
+
+class AirthingsWavePlus : public PollingComponent, public ble_client::BLEClientNode {
+ public:
+  AirthingsWavePlus();
+
+  void dump_config() override;
+  void update() override;
+
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override;
+
+  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
+  void set_radon(sensor::Sensor *radon) { radon_sensor_ = radon; }
+  void set_radon_long_term(sensor::Sensor *radon_long_term) { radon_long_term_sensor_ = radon_long_term; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
+  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
+  void set_co2(sensor::Sensor *co2) { co2_sensor_ = co2; }
+  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
+
+ protected:
+  bool is_valid_radon_value_(uint16_t radon);
+  bool is_valid_voc_value_(uint16_t voc);
+  bool is_valid_co2_value_(uint16_t co2);
+
+  void read_sensors_(uint8_t *value, uint16_t value_len);
+  void request_read_values_();
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *radon_sensor_{nullptr};
+  sensor::Sensor *radon_long_term_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+  sensor::Sensor *pressure_sensor_{nullptr};
+  sensor::Sensor *co2_sensor_{nullptr};
+  sensor::Sensor *tvoc_sensor_{nullptr};
+
+  uint16_t handle_;
+  esp32_ble_tracker::ESPBTUUID service_uuid_;
+  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
+
+  struct WavePlusReadings {
+    uint8_t version;
+    uint8_t humidity;
+    uint8_t ambientLight;
+    uint8_t unused01;
+    uint16_t radon;
+    uint16_t radon_lt;
+    uint16_t temperature;
+    uint16_t pressure;
+    uint16_t co2;
+    uint16_t voc;
+  };
+};
+
+}  // namespace airthings_wave_plus
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_plus/sensor.py

@@ -0,0 +1,116 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, ble_client
+
+from esphome.const import (
+    DEVICE_CLASS_CARBON_DIOXIDE,
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_PRESSURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_PERCENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+    ICON_RADIOACTIVE,
+    CONF_ID,
+    CONF_RADON,
+    CONF_RADON_LONG_TERM,
+    CONF_HUMIDITY,
+    CONF_TVOC,
+    CONF_CO2,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    UNIT_BECQUEREL_PER_CUBIC_METER,
+    UNIT_PARTS_PER_MILLION,
+    UNIT_PARTS_PER_BILLION,
+    ICON_RADIATOR,
+)
+
+DEPENDENCIES = ["ble_client"]
+
+airthings_wave_plus_ns = cg.esphome_ns.namespace("airthings_wave_plus")
+AirthingsWavePlus = airthings_wave_plus_ns.class_(
+    "AirthingsWavePlus", cg.PollingComponent, ble_client.BLEClientNode
+)
+
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+                accuracy_decimals=0,
+            ),
+            cv.Optional(CONF_RADON): sensor.sensor_schema(
+                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+                icon=ICON_RADIOACTIVE,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
+                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+                icon=ICON_RADIOACTIVE,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HECTOPASCAL,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_PRESSURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_CO2): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_MILLION,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_CARBON_DIOXIDE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TVOC): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_BILLION,
+                icon=ICON_RADIATOR,
+                accuracy_decimals=0,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("5min"))
+    .extend(ble_client.BLE_CLIENT_SCHEMA),
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+
+    await ble_client.register_ble_node(var, config)
+
+    if CONF_HUMIDITY in config:
+        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_RADON in config:
+        sens = await sensor.new_sensor(config[CONF_RADON])
+        cg.add(var.set_radon(sens))
+    if CONF_RADON_LONG_TERM in config:
+        sens = await sensor.new_sensor(config[CONF_RADON_LONG_TERM])
+        cg.add(var.set_radon_long_term(sens))
+    if CONF_TEMPERATURE in config:
+        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_PRESSURE in config:
+        sens = await sensor.new_sensor(config[CONF_PRESSURE])
+        cg.add(var.set_pressure(sens))
+    if CONF_CO2 in config:
+        sens = await sensor.new_sensor(config[CONF_CO2])
+        cg.add(var.set_co2(sens))
+    if CONF_TVOC in config:
+        sens = await sensor.new_sensor(config[CONF_TVOC])
+        cg.add(var.set_tvoc(sens))

esphome/components/am2320/am2320.cpp

@@ -5,6 +5,7 @@
 
 #include "am2320.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 
 namespace esphome {
 namespace am2320 {
@@ -18,12 +19,14 @@ uint16_t crc_16(uint8_t *ptr, uint8_t length) {
   //------------------------------
   while (length--) {
     crc ^= *ptr++;
-    for (i = 0; i < 8; i++)
+    for (i = 0; i < 8; i++) {
       if ((crc & 0x01) != 0) {
         crc >>= 1;
         crc ^= 0xA001;
-      } else
+      } else {
         crc >>= 1;
+      }
+    }
   }
   return crc;
 }
@@ -37,9 +40,9 @@ void AM2320Component::update() {
     return;
   }
 
-  float temperature = (((data[4] & 0x7F) << 8) + data[5]) / 10.0;
+  float temperature = (((data[4] & 0x7F) << 8) + data[5]) / 10.0f;
   temperature = (data[4] & 0x80) ? -temperature : temperature;
-  float humidity = ((data[2] << 8) + data[3]) / 10.0;
+  float humidity = ((data[2] << 8) + data[3]) / 10.0f;
 
   ESP_LOGD(TAG, "Got temperature=%.1f°C humidity=%.1f%%", temperature, humidity);
   if (this->temperature_sensor_ != nullptr)
@@ -77,7 +80,7 @@ bool AM2320Component::read_bytes_(uint8_t a_register, uint8_t *data, uint8_t len
 
   if (conversion > 0)
     delay(conversion);
-  return this->parent_->raw_receive(this->address_, data, len);
+  return this->read(data, len) == i2c::ERROR_OK;
 }
 
 bool AM2320Component::read_data_(uint8_t *data) {

esphome/components/am43/am43.cpp

@@ -1,12 +1,13 @@
 #include "am43.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 namespace esphome {
 namespace am43 {
 
-static const char *TAG = "am43";
+static const char *const TAG = "am43";
 
 void Am43::dump_config() {
   ESP_LOGCONFIG(TAG, "AM43");
@@ -15,8 +16,8 @@ void Am43::dump_config() {
 }
 
 void Am43::setup() {
-  this->encoder_ = new Am43Encoder();
-  this->decoder_ = new Am43Decoder();
+  this->encoder_ = make_unique<Am43Encoder>();
+  this->decoder_ = make_unique<Am43Decoder>();
   this->logged_in_ = false;
   this->last_battery_update_ = 0;
   this->current_sensor_ = 0;
@@ -30,7 +31,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
     }
     case ESP_GATTC_DISCONNECT_EVT: {
       this->logged_in_ = false;
-      this->node_state = espbt::ClientState::Idle;
+      this->node_state = espbt::ClientState::IDLE;
       if (this->battery_ != nullptr)
         this->battery_->publish_state(NAN);
       if (this->illuminance_ != nullptr)
@@ -38,7 +39,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
       break;
     }
     case ESP_GATTC_SEARCH_CMPL_EVT: {
-      auto chr = this->parent_->get_characteristic(AM43_SERVICE_UUID, AM43_CHARACTERISTIC_UUID);
+      auto *chr = this->parent_->get_characteristic(AM43_SERVICE_UUID, AM43_CHARACTERISTIC_UUID);
       if (chr == nullptr) {
         if (this->parent_->get_characteristic(AM43_TUYA_SERVICE_UUID, AM43_TUYA_CHARACTERISTIC_UUID) != nullptr) {
           ESP_LOGE(TAG, "[%s] Detected a Tuya AM43 which is not supported, sorry.",
@@ -53,7 +54,7 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
       break;
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
-      this->node_state = espbt::ClientState::Established;
+      this->node_state = espbt::ClientState::ESTABLISHED;
       this->update();
       break;
     }
@@ -74,13 +75,14 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
 
       if (this->current_sensor_ > 0) {
         if (this->illuminance_ != nullptr) {
-          auto packet = this->encoder_->get_light_level_request();
+          auto *packet = this->encoder_->get_light_level_request();
           auto status = esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_,
                                                  packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP,
                                                  ESP_GATT_AUTH_REQ_NONE);
-          if (status)
+          if (status) {
             ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(),
                      status);
+          }
         }
         this->current_sensor_ = 0;
       }
@@ -92,13 +94,13 @@ void Am43::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_i
 }
 
 void Am43::update() {
-  if (this->node_state != espbt::ClientState::Established) {
+  if (this->node_state != espbt::ClientState::ESTABLISHED) {
     ESP_LOGW(TAG, "[%s] Cannot poll, not connected", this->parent_->address_str().c_str());
     return;
   }
   if (this->current_sensor_ == 0) {
     if (this->battery_ != nullptr) {
-      auto packet = this->encoder_->get_battery_level_request();
+      auto *packet = this->encoder_->get_battery_level_request();
       auto status =
           esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
                                    packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);

esphome/components/am43/am43.h

@@ -6,7 +6,7 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/am43/am43_base.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 #include <esp_gattc_api.h>
 
@@ -28,8 +28,8 @@ class Am43 : public esphome::ble_client::BLEClientNode, public PollingComponent
 
  protected:
   uint16_t char_handle_;
-  Am43Encoder *encoder_;
-  Am43Decoder *decoder_;
+  std::unique_ptr<Am43Encoder> encoder_;
+  std::unique_ptr<Am43Decoder> decoder_;
   bool logged_in_;
   sensor::Sensor *battery_{nullptr};
   sensor::Sensor *illuminance_{nullptr};

esphome/components/am43/am43_base.cpp

@@ -1,4 +1,6 @@
 #include "am43_base.h"
+#include <cstring>
+#include <cstdio>
 
 namespace esphome {
 namespace am43 {

esphome/components/am43/cover/__init__.py

@@ -5,7 +5,7 @@ from esphome.const import CONF_ID, CONF_PIN
 
 CODEOWNERS = ["@buxtronix"]
 DEPENDENCIES = ["ble_client"]
-AUTO_LOAD = ["am43"]
+AUTO_LOAD = ["am43", "sensor"]
 
 CONF_INVERT_POSITION = "invert_position"
 

esphome/components/am43/cover/am43_cover.cpp

@@ -1,12 +1,12 @@
 #include "am43_cover.h"
 #include "esphome/core/log.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 namespace esphome {
 namespace am43 {
 
-static const char *TAG = "am43_cover";
+static const char *const TAG = "am43_cover";
 
 using namespace esphome::cover;
 
@@ -18,22 +18,23 @@ void Am43Component::dump_config() {
 
 void Am43Component::setup() {
   this->position = COVER_OPEN;
-  this->encoder_ = new Am43Encoder();
-  this->decoder_ = new Am43Decoder();
+  this->encoder_ = make_unique<Am43Encoder>();
+  this->decoder_ = make_unique<Am43Decoder>();
   this->logged_in_ = false;
 }
 
 void Am43Component::loop() {
-  if (this->node_state == espbt::ClientState::Established && !this->logged_in_) {
-    auto packet = this->encoder_->get_send_pin_request(this->pin_);
+  if (this->node_state == espbt::ClientState::ESTABLISHED && !this->logged_in_) {
+    auto *packet = this->encoder_->get_send_pin_request(this->pin_);
     auto status =
         esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
                                  packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
     ESP_LOGI(TAG, "[%s] Logging into AM43", this->get_name().c_str());
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] Error writing set_pin to device, error = %d", this->get_name().c_str(), status);
-    else
+    } else {
       this->logged_in_ = true;
+    }
   }
 }
 
@@ -46,12 +47,12 @@ CoverTraits Am43Component::get_traits() {
 }
 
 void Am43Component::control(const CoverCall &call) {
-  if (this->node_state != espbt::ClientState::Established) {
+  if (this->node_state != espbt::ClientState::ESTABLISHED) {
     ESP_LOGW(TAG, "[%s] Cannot send cover control, not connected", this->get_name().c_str());
     return;
   }
   if (call.get_stop()) {
-    auto packet = this->encoder_->get_stop_request();
+    auto *packet = this->encoder_->get_stop_request();
     auto status =
         esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
                                  packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
@@ -63,7 +64,7 @@ void Am43Component::control(const CoverCall &call) {
 
     if (this->invert_position_)
       pos = 1 - pos;
-    auto packet = this->encoder_->get_set_position_request(100 - (uint8_t)(pos * 100));
+    auto *packet = this->encoder_->get_set_position_request(100 - (uint8_t)(pos * 100));
     auto status =
         esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, packet->length,
                                  packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
@@ -80,7 +81,7 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       break;
     }
     case ESP_GATTC_SEARCH_CMPL_EVT: {
-      auto chr = this->parent_->get_characteristic(AM43_SERVICE_UUID, AM43_CHARACTERISTIC_UUID);
+      auto *chr = this->parent_->get_characteristic(AM43_SERVICE_UUID, AM43_CHARACTERISTIC_UUID);
       if (chr == nullptr) {
         if (this->parent_->get_characteristic(AM43_TUYA_SERVICE_UUID, AM43_TUYA_CHARACTERISTIC_UUID) != nullptr) {
           ESP_LOGE(TAG, "[%s] Detected a Tuya AM43 which is not supported, sorry.", this->get_name().c_str());
@@ -98,7 +99,7 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       break;
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
-      this->node_state = espbt::ClientState::Established;
+      this->node_state = espbt::ClientState::ESTABLISHED;
       break;
     }
     case ESP_GATTC_NOTIFY_EVT: {
@@ -120,7 +121,7 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       if (this->decoder_->has_pin_response()) {
         if (this->decoder_->pin_ok_) {
           ESP_LOGI(TAG, "[%s] AM43 pin accepted.", this->get_name().c_str());
-          auto packet = this->encoder_->get_position_request();
+          auto *packet = this->encoder_->get_position_request();
           auto status = esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_,
                                                  packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP,
                                                  ESP_GATT_AUTH_REQ_NONE);

esphome/components/am43/cover/am43_cover.h

@@ -6,7 +6,7 @@
 #include "esphome/components/cover/cover.h"
 #include "esphome/components/am43/am43_base.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 #include <esp_gattc_api.h>
 
@@ -32,8 +32,8 @@ class Am43Component : public cover::Cover, public esphome::ble_client::BLEClient
   uint16_t char_handle_;
   uint16_t pin_;
   bool invert_position_;
-  Am43Encoder *encoder_;
-  Am43Decoder *decoder_;
+  std::unique_ptr<Am43Encoder> encoder_;
+  std::unique_ptr<Am43Decoder> decoder_;
   bool logged_in_;
 
   float position_;

esphome/components/am43/sensor.py

@@ -4,7 +4,8 @@ from esphome.components import sensor, ble_client
 from esphome.const import (
     CONF_ID,
     CONF_BATTERY_LEVEL,
-    ICON_BATTERY,
+    DEVICE_CLASS_BATTERY,
+    ENTITY_CATEGORY_DIAGNOSTIC,
     CONF_ILLUMINANCE,
     ICON_BRIGHTNESS_5,
     UNIT_PERCENT,
@@ -20,10 +21,15 @@ CONFIG_SCHEMA = (
         {
             cv.GenerateID(): cv.declare_id(Am43),
             cv.Optional(CONF_BATTERY_LEVEL): sensor.sensor_schema(
-                UNIT_PERCENT, ICON_BATTERY, 0
+                unit_of_measurement=UNIT_PERCENT,
+                device_class=DEVICE_CLASS_BATTERY,
+                accuracy_decimals=0,
+                entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
             ),
             cv.Optional(CONF_ILLUMINANCE): sensor.sensor_schema(
-                UNIT_PERCENT, ICON_BRIGHTNESS_5, 0
+                unit_of_measurement=UNIT_PERCENT,
+                icon=ICON_BRIGHTNESS_5,
+                accuracy_decimals=0,
             ),
         }
     )

esphome/components/analog_threshold/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@ianchi"]

esphome/components/analog_threshold/analog_threshold_binary_sensor.cpp

@@ -0,0 +1,40 @@
+#include "analog_threshold_binary_sensor.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace analog_threshold {
+
+static const char *const TAG = "analog_threshold.binary_sensor";
+
+void AnalogThresholdBinarySensor::setup() {
+  float sensor_value = this->sensor_->get_state();
+
+  // TRUE state is defined to be when sensor is >= threshold
+  // so when undefined sensor value initialize to FALSE
+  if (std::isnan(sensor_value)) {
+    this->publish_initial_state(false);
+  } else {
+    this->publish_initial_state(sensor_value >= (this->lower_threshold_ + this->upper_threshold_) / 2.0f);
+  }
+}
+
+void AnalogThresholdBinarySensor::set_sensor(sensor::Sensor *analog_sensor) {
+  this->sensor_ = analog_sensor;
+
+  this->sensor_->add_on_state_callback([this](float sensor_value) {
+    // if there is an invalid sensor reading, ignore the change and keep the current state
+    if (!std::isnan(sensor_value)) {
+      this->publish_state(sensor_value >= (this->state ? this->lower_threshold_ : this->upper_threshold_));
+    }
+  });
+}
+
+void AnalogThresholdBinarySensor::dump_config() {
+  LOG_BINARY_SENSOR("", "Analog Threshold Binary Sensor", this);
+  LOG_SENSOR("  ", "Sensor", this->sensor_);
+  ESP_LOGCONFIG(TAG, "  Upper threshold: %.11f", this->upper_threshold_);
+  ESP_LOGCONFIG(TAG, "  Lower threshold: %.11f", this->lower_threshold_);
+}
+
+}  // namespace analog_threshold
+}  // namespace esphome

esphome/components/analog_threshold/analog_threshold_binary_sensor.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/binary_sensor/binary_sensor.h"
+#include "esphome/components/sensor/sensor.h"
+
+namespace esphome {
+namespace analog_threshold {
+
+class AnalogThresholdBinarySensor : public Component, public binary_sensor::BinarySensor {
+ public:
+  void dump_config() override;
+  void setup() override;
+
+  float get_setup_priority() const override { return setup_priority::DATA; }
+
+  void set_sensor(sensor::Sensor *analog_sensor);
+  void set_upper_threshold(float threshold) { this->upper_threshold_ = threshold; }
+  void set_lower_threshold(float threshold) { this->lower_threshold_ = threshold; }
+
+ protected:
+  sensor::Sensor *sensor_{nullptr};
+
+  float upper_threshold_;
+  float lower_threshold_;
+};
+
+}  // namespace analog_threshold
+}  // namespace esphome

esphome/components/analog_threshold/binary_sensor.py

@@ -0,0 +1,44 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import binary_sensor, sensor
+from esphome.const import (
+    CONF_SENSOR_ID,
+    CONF_THRESHOLD,
+)
+
+analog_threshold_ns = cg.esphome_ns.namespace("analog_threshold")
+
+AnalogThresholdBinarySensor = analog_threshold_ns.class_(
+    "AnalogThresholdBinarySensor", binary_sensor.BinarySensor, cg.Component
+)
+
+CONF_UPPER = "upper"
+CONF_LOWER = "lower"
+
+CONFIG_SCHEMA = binary_sensor.BINARY_SENSOR_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(AnalogThresholdBinarySensor),
+        cv.Required(CONF_SENSOR_ID): cv.use_id(sensor.Sensor),
+        cv.Required(CONF_THRESHOLD): cv.Any(
+            cv.float_,
+            cv.Schema(
+                {cv.Required(CONF_UPPER): cv.float_, cv.Required(CONF_LOWER): cv.float_}
+            ),
+        ),
+    }
+).extend(cv.COMPONENT_SCHEMA)
+
+
+async def to_code(config):
+    var = await binary_sensor.new_binary_sensor(config)
+    await cg.register_component(var, config)
+
+    sens = await cg.get_variable(config[CONF_SENSOR_ID])
+    cg.add(var.set_sensor(sens))
+
+    if isinstance(config[CONF_THRESHOLD], float):
+        cg.add(var.set_upper_threshold(config[CONF_THRESHOLD]))
+        cg.add(var.set_lower_threshold(config[CONF_THRESHOLD]))
+    else:
+        cg.add(var.set_upper_threshold(config[CONF_THRESHOLD][CONF_UPPER]))
+        cg.add(var.set_lower_threshold(config[CONF_THRESHOLD][CONF_LOWER]))

esphome/components/animation/__init__.py

@@ -5,7 +5,7 @@ from esphome.components import display, font
 import esphome.components.image as espImage
 import esphome.config_validation as cv
 import esphome.codegen as cg
-from esphome.const import CONF_FILE, CONF_ID, CONF_TYPE, CONF_RESIZE
+from esphome.const import CONF_FILE, CONF_ID, CONF_RAW_DATA_ID, CONF_RESIZE, CONF_TYPE
 from esphome.core import CORE, HexInt
 
 _LOGGER = logging.getLogger(__name__)
@@ -15,8 +15,6 @@ MULTI_CONF = True
 
 Animation_ = display.display_ns.class_("Animation")
 
-CONF_RAW_DATA_ID = "raw_data_id"
-
 ANIMATION_SCHEMA = cv.Schema(
     {
         cv.Required(CONF_ID): cv.declare_id(Animation_),
@@ -46,8 +44,9 @@ async def to_code(config):
     width, height = image.size
     frames = image.n_frames
     if CONF_RESIZE in config:
-        image.thumbnail(config[CONF_RESIZE])
-        width, height = image.size
+        new_width_max, new_height_max = config[CONF_RESIZE]
+        ratio = min(new_width_max / width, new_height_max / height)
+        width, height = int(width * ratio), int(height * ratio)
     else:
         if width > 500 or height > 500:
             _LOGGER.warning(
@@ -61,7 +60,13 @@ async def to_code(config):
         for frameIndex in range(frames):
             image.seek(frameIndex)
             frame = image.convert("L", dither=Image.NONE)
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
             pixels = list(frame.getdata())
+            if len(pixels) != height * width:
+                raise core.EsphomeError(
+                    f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
+                )
             for pix in pixels:
                 data[pos] = pix
                 pos += 1
@@ -71,8 +76,16 @@ async def to_code(config):
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
+            if CONF_RESIZE in config:
+                image.thumbnail(config[CONF_RESIZE])
             frame = image.convert("RGB")
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
             pixels = list(frame.getdata())
+            if len(pixels) != height * width:
+                raise core.EsphomeError(
+                    f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
+                )
             for pix in pixels:
                 data[pos] = pix[0]
                 pos += 1
@@ -81,12 +94,37 @@ async def to_code(config):
                 data[pos] = pix[2]
                 pos += 1
 
+    elif config[CONF_TYPE] == "RGB565":
+        data = [0 for _ in range(height * width * 2 * frames)]
+        pos = 0
+        for frameIndex in range(frames):
+            image.seek(frameIndex)
+            frame = image.convert("RGB")
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
+            pixels = list(frame.getdata())
+            if len(pixels) != height * width:
+                raise core.EsphomeError(
+                    f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
+                )
+            for pix in pixels:
+                R = pix[0] >> 3
+                G = pix[1] >> 2
+                B = pix[2] >> 3
+                rgb = (R << 11) | (G << 5) | B
+                data[pos] = rgb >> 8
+                pos += 1
+                data[pos] = rgb & 255
+                pos += 1
+
     elif config[CONF_TYPE] == "BINARY":
         width8 = ((width + 7) // 8) * 8
         data = [0 for _ in range((height * width8 // 8) * frames)]
         for frameIndex in range(frames):
             image.seek(frameIndex)
             frame = image.convert("1", dither=Image.NONE)
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
             for y in range(height):
                 for x in range(width):
                     if frame.getpixel((x, y)):

esphome/components/anova/anova.cpp

@@ -1,19 +1,19 @@
 #include "anova.h"
 #include "esphome/core/log.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 namespace esphome {
 namespace anova {
 
-static const char *TAG = "anova";
+static const char *const TAG = "anova";
 
 using namespace esphome::climate;
 
 void Anova::dump_config() { LOG_CLIMATE("", "Anova BLE Cooker", this); }
 
 void Anova::setup() {
-  this->codec_ = new AnovaCodec();
+  this->codec_ = make_unique<AnovaCodec>();
   this->current_request_ = 0;
 }
 
@@ -40,7 +40,7 @@ void Anova::control(const ClimateCall &call) {
       ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
   }
   if (call.get_target_temperature().has_value()) {
-    auto pkt = this->codec_->get_set_target_temp_request(*call.get_target_temperature());
+    auto *pkt = this->codec_->get_set_target_temp_request(*call.get_target_temperature());
     auto status = esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_,
                                            pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
     if (status)
@@ -57,7 +57,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
       break;
     }
     case ESP_GATTC_SEARCH_CMPL_EVT: {
-      auto chr = this->parent_->get_characteristic(ANOVA_SERVICE_UUID, ANOVA_CHARACTERISTIC_UUID);
+      auto *chr = this->parent_->get_characteristic(ANOVA_SERVICE_UUID, ANOVA_CHARACTERISTIC_UUID);
       if (chr == nullptr) {
         ESP_LOGW(TAG, "[%s] No control service found at device, not an Anova..?", this->get_name().c_str());
         ESP_LOGW(TAG, "[%s] Note, this component does not currently support Anova Nano.", this->get_name().c_str());
@@ -72,7 +72,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
       break;
     }
     case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
-      this->node_state = espbt::ClientState::Established;
+      this->node_state = espbt::ClientState::ESTABLISHED;
       this->current_request_ = 0;
       this->update();
       break;
@@ -92,7 +92,7 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
       }
       if (this->codec_->has_unit()) {
         this->fahrenheit_ = (this->codec_->unit_ == 'f');
-        ESP_LOGD(TAG, "Anova units is %s", this->fahrenheit_ ? "fahrenheit" : "celcius");
+        ESP_LOGD(TAG, "Anova units is %s", this->fahrenheit_ ? "fahrenheit" : "celsius");
         this->current_request_++;
       }
       this->publish_state();
@@ -114,9 +114,10 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
           auto status =
               esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_, pkt->length,
                                        pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-          if (status)
+          if (status) {
             ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(),
                      status);
+          }
         }
       }
       break;
@@ -129,13 +130,13 @@ void Anova::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_
 void Anova::set_unit_of_measurement(const char *unit) { this->fahrenheit_ = !strncmp(unit, "f", 1); }
 
 void Anova::update() {
-  if (this->node_state != espbt::ClientState::Established)
+  if (this->node_state != espbt::ClientState::ESTABLISHED)
     return;
 
   if (this->current_request_ < 2) {
-    auto pkt = this->codec_->get_read_device_status_request();
+    auto *pkt = this->codec_->get_read_device_status_request();
     if (this->current_request_ == 0)
-      auto pkt = this->codec_->get_set_unit_request(this->fahrenheit_ ? 'f' : 'c');
+      this->codec_->get_set_unit_request(this->fahrenheit_ ? 'f' : 'c');
     auto status = esp_ble_gattc_write_char(this->parent_->gattc_if, this->parent_->conn_id, this->char_handle_,
                                            pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
     if (status)

esphome/components/anova/anova.h

@@ -6,7 +6,7 @@
 #include "esphome/components/climate/climate.h"
 #include "anova_base.h"
 
-#ifdef ARDUINO_ARCH_ESP32
+#ifdef USE_ESP32
 
 #include <esp_gattc_api.h>
 
@@ -27,19 +27,19 @@ class Anova : public climate::Climate, public esphome::ble_client::BLEClientNode
                            esp_ble_gattc_cb_param_t *param) override;
   void dump_config() override;
   float get_setup_priority() const override { return setup_priority::DATA; }
-  climate::ClimateTraits traits() {
+  climate::ClimateTraits traits() override {
     auto traits = climate::ClimateTraits();
     traits.set_supports_current_temperature(true);
-    traits.set_supports_heat_mode(true);
+    traits.set_supported_modes({climate::CLIMATE_MODE_OFF, climate::ClimateMode::CLIMATE_MODE_HEAT});
     traits.set_visual_min_temperature(25.0);
     traits.set_visual_max_temperature(100.0);
     traits.set_visual_temperature_step(0.1);
     return traits;
   }
-  void set_unit_of_measurement(const char *);
+  void set_unit_of_measurement(const char *unit);
 
  protected:
-  AnovaCodec *codec_;
+  std::unique_ptr<AnovaCodec> codec_;
   void control(const climate::ClimateCall &call) override;
   uint16_t char_handle_;
   uint8_t current_request_;

esphome/components/anova/anova_base.cpp

@@ -1,4 +1,6 @@
 #include "anova_base.h"
+#include <cstdio>
+#include <cstring>
 
 namespace esphome {
 namespace anova {
@@ -71,51 +73,46 @@ AnovaPacket *AnovaCodec::get_stop_request() {
 }
 
 void AnovaCodec::decode(const uint8_t *data, uint16_t length) {
-  memset(this->buf_, 0, 32);
-  strncpy(this->buf_, (char *) data, length);
+  char buf[32];
+  memset(buf, 0, sizeof(buf));
+  strncpy(buf, (char *) data, std::min<uint16_t>(length, sizeof(buf) - 1));
   this->has_target_temp_ = this->has_current_temp_ = this->has_unit_ = this->has_running_ = false;
   switch (this->current_query_) {
     case READ_DEVICE_STATUS: {
-      if (!strncmp(this->buf_, "stopped", 7)) {
+      if (!strncmp(buf, "stopped", 7)) {
         this->has_running_ = true;
         this->running_ = false;
       }
-      if (!strncmp(this->buf_, "running", 7)) {
+      if (!strncmp(buf, "running", 7)) {
         this->has_running_ = true;
         this->running_ = true;
       }
       break;
     }
     case START: {
-      if (!strncmp(this->buf_, "start", 5)) {
+      if (!strncmp(buf, "start", 5)) {
         this->has_running_ = true;
         this->running_ = true;
       }
       break;
     }
     case STOP: {
-      if (!strncmp(this->buf_, "stop", 4)) {
+      if (!strncmp(buf, "stop", 4)) {
         this->has_running_ = true;
         this->running_ = false;
       }
       break;
     }
-    case READ_TARGET_TEMPERATURE: {
-      this->target_temp_ = strtof(this->buf_, nullptr);
-      if (this->fahrenheit_)
-        this->target_temp_ = ftoc(this->target_temp_);
-      this->has_target_temp_ = true;
-      break;
-    }
+    case READ_TARGET_TEMPERATURE:
     case SET_TARGET_TEMPERATURE: {
-      this->target_temp_ = strtof(this->buf_, nullptr);
+      this->target_temp_ = parse_number<float>(str_until(buf, '\r')).value_or(0.0f);
       if (this->fahrenheit_)
         this->target_temp_ = ftoc(this->target_temp_);
       this->has_target_temp_ = true;
       break;
     }
     case READ_CURRENT_TEMPERATURE: {
-      this->current_temp_ = strtof(this->buf_, nullptr);
+      this->current_temp_ = parse_number<float>(str_until(buf, '\r')).value_or(0.0f);
       if (this->fahrenheit_)
         this->current_temp_ = ftoc(this->current_temp_);
       this->has_current_temp_ = true;
@@ -123,8 +120,8 @@ void AnovaCodec::decode(const uint8_t *data, uint16_t length) {
     }
     case SET_UNIT:
     case READ_UNIT: {
-      this->unit_ = this->buf_[0];
-      this->fahrenheit_ = this->buf_[0] == 'f';
+      this->unit_ = buf[0];
+      this->fahrenheit_ = buf[0] == 'f';
       this->has_unit_ = true;
       break;
     }

esphome/components/anova/anova_base.h

@@ -70,7 +70,6 @@ class AnovaCodec {
   bool has_current_temp_;
   bool has_unit_;
   bool has_running_;
-  char buf_[32];
   bool fahrenheit_;
 
   CurrentQuery current_query_;

esphome/components/apds9960/apds9960.cpp

@@ -1,5 +1,6 @@
 #include "apds9960.h"
 #include "esphome/core/log.h"
+#include "esphome/core/hal.h"
 
 namespace esphome {
 namespace apds9960 {
@@ -224,9 +225,10 @@ void APDS9960::read_gesture_data_() {
 
   uint8_t fifo_level;
   APDS9960_WARNING_CHECK(this->read_byte(0xAE, &fifo_level), "Reading FIFO level failed.");
-  if (fifo_level == 0)
+  if (fifo_level == 0) {
     // no data to process
     return;
+  }
 
   APDS9960_WARNING_CHECK(fifo_level <= 32, "FIFO level has invalid value.")
 

esphome/components/apds9960/binary_sensor.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import CONF_DIRECTION, CONF_DEVICE_CLASS, DEVICE_CLASS_MOVING
+from esphome.const import CONF_DIRECTION, DEVICE_CLASS_MOVING
 from . import APDS9960, CONF_APDS9960_ID
 
 DEPENDENCIES = ["apds9960"]
@@ -13,13 +13,12 @@ DIRECTIONS = {
     "RIGHT": "set_right_direction",
 }
 
-CONFIG_SCHEMA = binary_sensor.BINARY_SENSOR_SCHEMA.extend(
+CONFIG_SCHEMA = binary_sensor.binary_sensor_schema(
+    device_class=DEVICE_CLASS_MOVING
+).extend(
     {
-        cv.Required(CONF_DIRECTION): cv.one_of(*DIRECTIONS, upper=True),
         cv.GenerateID(CONF_APDS9960_ID): cv.use_id(APDS9960),
-        cv.Optional(
-            CONF_DEVICE_CLASS, default=DEVICE_CLASS_MOVING
-        ): binary_sensor.device_class,
+        cv.Required(CONF_DIRECTION): cv.one_of(*DIRECTIONS, upper=True),
     }
 )
 

esphome/components/api/__init__.py

@@ -1,3 +1,5 @@
+import base64
+
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome import automation
@@ -6,6 +8,7 @@ from esphome.const import (
     CONF_DATA,
     CONF_DATA_TEMPLATE,
     CONF_ID,
+    CONF_KEY,
     CONF_PASSWORD,
     CONF_PORT,
     CONF_REBOOT_TIMEOUT,
@@ -19,7 +22,7 @@ from esphome.const import (
 from esphome.core import coroutine_with_priority
 
 DEPENDENCIES = ["network"]
-AUTO_LOAD = ["async_tcp"]
+AUTO_LOAD = ["socket"]
 CODEOWNERS = ["@OttoWinter"]
 
 api_ns = cg.esphome_ns.namespace("api")
@@ -41,6 +44,22 @@ SERVICE_ARG_NATIVE_TYPES = {
     "float[]": cg.std_vector.template(float),
     "string[]": cg.std_vector.template(cg.std_string),
 }
+CONF_ENCRYPTION = "encryption"
+
+
+def validate_encryption_key(value):
+    value = cv.string_strict(value)
+    try:
+        decoded = base64.b64decode(value, validate=True)
+    except ValueError as err:
+        raise cv.Invalid("Invalid key format, please check it's using base64") from err
+
+    if len(decoded) != 32:
+        raise cv.Invalid("Encryption key must be base64 and 32 bytes long")
+
+    # Return original data for roundtrip conversion
+    return value
+
 
 CONFIG_SCHEMA = cv.Schema(
     {
@@ -63,6 +82,11 @@ CONFIG_SCHEMA = cv.Schema(
                 ),
             }
         ),
+        cv.Optional(CONF_ENCRYPTION): cv.Schema(
+            {
+                cv.Required(CONF_KEY): validate_encryption_key,
+            }
+        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 
@@ -92,6 +116,15 @@ async def to_code(config):
         cg.add(var.register_user_service(trigger))
         await automation.build_automation(trigger, func_args, conf)
 
+    if CONF_ENCRYPTION in config:
+        conf = config[CONF_ENCRYPTION]
+        decoded = base64.b64decode(conf[CONF_KEY])
+        cg.add(var.set_noise_psk(list(decoded)))
+        cg.add_define("USE_API_NOISE")
+        cg.add_library("esphome/noise-c", "0.1.4")
+    else:
+        cg.add_define("USE_API_PLAINTEXT")
+
     cg.add_define("USE_API")
     cg.add_global(api_ns.using)
 

esphome/components/api/api.proto

@@ -40,6 +40,9 @@ service APIConnection {
   rpc climate_command (ClimateCommandRequest) returns (void) {}
   rpc number_command (NumberCommandRequest) returns (void) {}
   rpc select_command (SelectCommandRequest) returns (void) {}
+  rpc button_command (ButtonCommandRequest) returns (void) {}
+  rpc lock_command (LockCommandRequest) returns (void) {}
+  rpc media_player_command (MediaPlayerCommandRequest) returns (void) {}
 }
 
 
@@ -94,6 +97,9 @@ message HelloResponse {
   // and only exists for debugging/logging purposes.
   // For example "ESPHome v1.10.0 on ESP8266"
   string server_info = 3;
+
+  // The name of the server (App.get_name())
+  string name = 4;
 }
 
 // Message sent at the beginning of each connection to authenticate the client
@@ -182,6 +188,8 @@ message DeviceInfoResponse {
   // The esphome project details if set
   string project_name = 8;
   string project_version = 9;
+
+  uint32 webserver_port = 10;
 }
 
 message ListEntitiesRequest {
@@ -201,6 +209,14 @@ message SubscribeStatesRequest {
   // Empty
 }
 
+// ==================== COMMON =====================
+
+enum EntityCategory {
+  ENTITY_CATEGORY_NONE = 0;
+  ENTITY_CATEGORY_CONFIG = 1;
+  ENTITY_CATEGORY_DIAGNOSTIC = 2;
+}
+
 // ==================== BINARY SENSOR ====================
 message ListEntitiesBinarySensorResponse {
   option (id) = 12;
@@ -215,6 +231,8 @@ message ListEntitiesBinarySensorResponse {
   string device_class = 5;
   bool is_status_binary_sensor = 6;
   bool disabled_by_default = 7;
+  string icon = 8;
+  EntityCategory entity_category = 9;
 }
 message BinarySensorStateResponse {
   option (id) = 21;
@@ -245,6 +263,8 @@ message ListEntitiesCoverResponse {
   bool supports_tilt = 7;
   string device_class = 8;
   bool disabled_by_default = 9;
+  string icon = 10;
+  EntityCategory entity_category = 11;
 }
 
 enum LegacyCoverState {
@@ -313,6 +333,8 @@ message ListEntitiesFanResponse {
   bool supports_direction = 7;
   int32 supported_speed_count = 8;
   bool disabled_by_default = 9;
+  string icon = 10;
+  EntityCategory entity_category = 11;
 }
 enum FanSpeed {
   FAN_SPEED_LOW = 0;
@@ -388,6 +410,8 @@ message ListEntitiesLightResponse {
   float max_mireds = 10;
   repeated string effects = 11;
   bool disabled_by_default = 13;
+  string icon = 14;
+  EntityCategory entity_category = 15;
 }
 message LightStateResponse {
   option (id) = 24;
@@ -449,6 +473,7 @@ enum SensorStateClass {
   STATE_CLASS_NONE = 0;
   STATE_CLASS_MEASUREMENT = 1;
   STATE_CLASS_TOTAL_INCREASING = 2;
+  STATE_CLASS_TOTAL = 3;
 }
 
 enum SensorLastResetType {
@@ -473,8 +498,10 @@ message ListEntitiesSensorResponse {
   bool force_update = 8;
   string device_class = 9;
   SensorStateClass state_class = 10;
-  SensorLastResetType last_reset_type = 11;
+  // Last reset type removed in 2021.9.0
+  SensorLastResetType legacy_last_reset_type = 11;
   bool disabled_by_default = 12;
+  EntityCategory entity_category = 13;
 }
 message SensorStateResponse {
   option (id) = 25;
@@ -503,6 +530,8 @@ message ListEntitiesSwitchResponse {
   string icon = 5;
   bool assumed_state = 6;
   bool disabled_by_default = 7;
+  EntityCategory entity_category = 8;
+  string device_class = 9;
 }
 message SwitchStateResponse {
   option (id) = 26;
@@ -536,6 +565,7 @@ message ListEntitiesTextSensorResponse {
 
   string icon = 5;
   bool disabled_by_default = 6;
+  EntityCategory entity_category = 7;
 }
 message TextSensorStateResponse {
   option (id) = 27;
@@ -696,6 +726,8 @@ message ListEntitiesCameraResponse {
   string name = 3;
   string unique_id = 4;
   bool disabled_by_default = 5;
+  string icon = 6;
+  EntityCategory entity_category = 7;
 }
 
 message CameraImageResponse {
@@ -789,6 +821,8 @@ message ListEntitiesClimateResponse {
   repeated ClimatePreset supported_presets = 16;
   repeated string supported_custom_presets = 17;
   bool disabled_by_default = 18;
+  string icon = 19;
+  EntityCategory entity_category = 20;
 }
 message ClimateStateResponse {
   option (id) = 47;
@@ -842,6 +876,11 @@ message ClimateCommandRequest {
 }
 
 // ==================== NUMBER ====================
+enum NumberMode {
+  NUMBER_MODE_AUTO = 0;
+  NUMBER_MODE_BOX = 1;
+  NUMBER_MODE_SLIDER = 2;
+}
 message ListEntitiesNumberResponse {
   option (id) = 49;
   option (source) = SOURCE_SERVER;
@@ -857,6 +896,9 @@ message ListEntitiesNumberResponse {
   float max_value = 7;
   float step = 8;
   bool disabled_by_default = 9;
+  EntityCategory entity_category = 10;
+  string unit_of_measurement = 11;
+  NumberMode mode = 12;
 }
 message NumberStateResponse {
   option (id) = 50;
@@ -894,6 +936,7 @@ message ListEntitiesSelectResponse {
   string icon = 5;
   repeated string options = 6;
   bool disabled_by_default = 7;
+  EntityCategory entity_category = 8;
 }
 message SelectStateResponse {
   option (id) = 53;
@@ -916,3 +959,143 @@ message SelectCommandRequest {
   fixed32 key = 1;
   string state = 2;
 }
+
+
+// ==================== LOCK ====================
+enum LockState {
+  LOCK_STATE_NONE = 0;
+  LOCK_STATE_LOCKED = 1;
+  LOCK_STATE_UNLOCKED = 2;
+  LOCK_STATE_JAMMED = 3;
+  LOCK_STATE_LOCKING = 4;
+  LOCK_STATE_UNLOCKING = 5;
+}
+enum LockCommand  {
+  LOCK_UNLOCK = 0;
+  LOCK_LOCK = 1;
+  LOCK_OPEN = 2;
+}
+message ListEntitiesLockResponse {
+  option (id) = 58;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_LOCK";
+
+  string object_id = 1;
+  fixed32 key = 2;
+  string name = 3;
+  string unique_id = 4;
+
+  string icon = 5;
+  bool disabled_by_default = 6;
+  EntityCategory entity_category = 7;
+  bool assumed_state = 8;
+
+  bool supports_open = 9;
+  bool requires_code = 10;
+
+  // Not yet implemented:
+  string code_format = 11;
+}
+message LockStateResponse {
+  option (id) = 59;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_LOCK";
+  option (no_delay) = true;
+  fixed32 key = 1;
+  LockState state = 2;
+}
+message LockCommandRequest {
+  option (id) = 60;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_LOCK";
+  option (no_delay) = true;
+  fixed32 key = 1;
+  LockCommand command = 2;
+
+  // Not yet implemented:
+  bool has_code = 3;
+  string code = 4;
+}
+
+// ==================== BUTTON ====================
+message ListEntitiesButtonResponse {
+  option (id) = 61;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_BUTTON";
+
+  string object_id = 1;
+  fixed32 key = 2;
+  string name = 3;
+  string unique_id = 4;
+
+  string icon = 5;
+  bool disabled_by_default = 6;
+  EntityCategory entity_category = 7;
+  string device_class = 8;
+}
+message ButtonCommandRequest {
+  option (id) = 62;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_BUTTON";
+  option (no_delay) = true;
+
+  fixed32 key = 1;
+}
+
+// ==================== MEDIA PLAYER ====================
+enum MediaPlayerState {
+  MEDIA_PLAYER_STATE_NONE = 0;
+  MEDIA_PLAYER_STATE_IDLE = 1;
+  MEDIA_PLAYER_STATE_PLAYING = 2;
+  MEDIA_PLAYER_STATE_PAUSED = 3;
+}
+enum MediaPlayerCommand {
+  MEDIA_PLAYER_COMMAND_PLAY = 0;
+  MEDIA_PLAYER_COMMAND_PAUSE = 1;
+  MEDIA_PLAYER_COMMAND_STOP = 2;
+  MEDIA_PLAYER_COMMAND_MUTE = 3;
+  MEDIA_PLAYER_COMMAND_UNMUTE = 4;
+}
+message ListEntitiesMediaPlayerResponse {
+  option (id) = 63;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_MEDIA_PLAYER";
+
+  string object_id = 1;
+  fixed32 key = 2;
+  string name = 3;
+  string unique_id = 4;
+
+  string icon = 5;
+  bool disabled_by_default = 6;
+  EntityCategory entity_category = 7;
+
+  bool supports_pause = 8;
+}
+message MediaPlayerStateResponse {
+  option (id) = 64;
+  option (source) = SOURCE_SERVER;
+  option (ifdef) = "USE_MEDIA_PLAYER";
+  option (no_delay) = true;
+  fixed32 key = 1;
+  MediaPlayerState state = 2;
+  float volume = 3;
+  bool muted = 4;
+}
+message MediaPlayerCommandRequest {
+  option (id) = 65;
+  option (source) = SOURCE_CLIENT;
+  option (ifdef) = "USE_MEDIA_PLAYER";
+  option (no_delay) = true;
+
+  fixed32 key = 1;
+
+  bool has_command = 2;
+  MediaPlayerCommand command = 3;
+
+  bool has_volume = 4;
+  float volume = 5;
+
+  bool has_media_url = 6;
+  string media_url = 7;
+}

esphome/components/api/api_connection.cpp

@@ -1,7 +1,10 @@
 #include "api_connection.h"
+#include "esphome/core/entity_base.h"
 #include "esphome/core/log.h"
-#include "esphome/core/util.h"
+#include "esphome/components/network/util.h"
 #include "esphome/core/version.h"
+#include "esphome/core/hal.h"
+#include <cerrno>
 
 #ifdef USE_DEEP_SLEEP
 #include "esphome/components/deep_sleep/deep_sleep_component.h"
@@ -9,152 +12,154 @@
 #ifdef USE_HOMEASSISTANT_TIME
 #include "esphome/components/homeassistant/time/homeassistant_time.h"
 #endif
-#ifdef USE_FAN
-#include "esphome/components/fan/fan_helpers.h"
-#endif
 
 namespace esphome {
 namespace api {
 
 static const char *const TAG = "api.connection";
+static const int ESP32_CAMERA_STOP_STREAM = 5000;
 
-APIConnection::APIConnection(AsyncClient *client, APIServer *parent)
-    : client_(client), parent_(parent), initial_state_iterator_(parent, this), list_entities_iterator_(parent, this) {
-  this->client_->onError([](void *s, AsyncClient *c, int8_t error) { ((APIConnection *) s)->on_error_(error); }, this);
-  this->client_->onDisconnect([](void *s, AsyncClient *c) { ((APIConnection *) s)->on_disconnect_(); }, this);
-  this->client_->onTimeout([](void *s, AsyncClient *c, uint32_t time) { ((APIConnection *) s)->on_timeout_(time); },
-                           this);
-  this->client_->onData([](void *s, AsyncClient *c, void *buf,
-                           size_t len) { ((APIConnection *) s)->on_data_(reinterpret_cast<uint8_t *>(buf), len); },
-                        this);
+APIConnection::APIConnection(std::unique_ptr<socket::Socket> sock, APIServer *parent)
+    : parent_(parent), initial_state_iterator_(this), list_entities_iterator_(this) {
+  this->proto_write_buffer_.reserve(64);
 
-  this->send_buffer_.reserve(64);
-  this->recv_buffer_.reserve(32);
-  this->client_info_ = this->client_->remoteIP().toString().c_str();
+#if defined(USE_API_PLAINTEXT)
+  helper_ = std::unique_ptr<APIFrameHelper>{new APIPlaintextFrameHelper(std::move(sock))};
+#elif defined(USE_API_NOISE)
+  helper_ = std::unique_ptr<APIFrameHelper>{new APINoiseFrameHelper(std::move(sock), parent->get_noise_ctx())};
+#else
+#error "No frame helper defined"
+#endif
+}
+void APIConnection::start() {
   this->last_traffic_ = millis();
-}
-APIConnection::~APIConnection() { delete this->client_; }
-void APIConnection::on_error_(int8_t error) { this->remove_ = true; }
-void APIConnection::on_disconnect_() { this->remove_ = true; }
-void APIConnection::on_timeout_(uint32_t time) { this->on_fatal_error(); }
-void APIConnection::on_data_(uint8_t *buf, size_t len) {
-  if (len == 0 || buf == nullptr)
+
+  APIError err = helper_->init();
+  if (err != APIError::OK) {
+    on_fatal_error();
+    ESP_LOGW(TAG, "%s: Helper init failed: %s errno=%d", client_info_.c_str(), api_error_to_str(err), errno);
     return;
-  this->recv_buffer_.insert(this->recv_buffer_.end(), buf, buf + len);
-}
-void APIConnection::parse_recv_buffer_() {
-  if (this->recv_buffer_.empty() || this->remove_)
-    return;
-
-  while (!this->recv_buffer_.empty()) {
-    if (this->recv_buffer_[0] != 0x00) {
-      ESP_LOGW(TAG, "Invalid preamble from %s", this->client_info_.c_str());
-      this->on_fatal_error();
-      return;
-    }
-    uint32_t i = 1;
-    const uint32_t size = this->recv_buffer_.size();
-    uint32_t consumed;
-    auto msg_size_varint = ProtoVarInt::parse(&this->recv_buffer_[i], size - i, &consumed);
-    if (!msg_size_varint.has_value())
-      // not enough data there yet
-      return;
-    i += consumed;
-    uint32_t msg_size = msg_size_varint->as_uint32();
-
-    auto msg_type_varint = ProtoVarInt::parse(&this->recv_buffer_[i], size - i, &consumed);
-    if (!msg_type_varint.has_value())
-      // not enough data there yet
-      return;
-    i += consumed;
-    uint32_t msg_type = msg_type_varint->as_uint32();
-
-    if (size - i < msg_size)
-      // message body not fully received
-      return;
-
-    uint8_t *msg = &this->recv_buffer_[i];
-    this->read_message(msg_size, msg_type, msg);
-    if (this->remove_)
-      return;
-    // pop front
-    uint32_t total = i + msg_size;
-    this->recv_buffer_.erase(this->recv_buffer_.begin(), this->recv_buffer_.begin() + total);
-    this->last_traffic_ = millis();
   }
-}
-
-void APIConnection::disconnect_client() {
-  this->client_->close();
-  this->remove_ = true;
+  client_info_ = helper_->getpeername();
+  helper_->set_log_info(client_info_);
 }
 
 void APIConnection::loop() {
   if (this->remove_)
     return;
 
-  if (this->next_close_) {
-    this->disconnect_client();
-    return;
-  }
-
-  if (!network_is_connected()) {
+  if (!network::is_connected()) {
     // when network is disconnected force disconnect immediately
     // don't wait for timeout
     this->on_fatal_error();
+    ESP_LOGW(TAG, "%s: Network unavailable, disconnecting", client_info_.c_str());
     return;
   }
-  if (this->client_->disconnected()) {
-    // failsafe for disconnect logic
-    this->on_disconnect_();
+  if (this->next_close_) {
+    // requested a disconnect
+    this->helper_->close();
+    this->remove_ = true;
     return;
   }
-  this->parse_recv_buffer_();
+
+  APIError err = helper_->loop();
+  if (err != APIError::OK) {
+    on_fatal_error();
+    ESP_LOGW(TAG, "%s: Socket operation failed: %s errno=%d", client_info_.c_str(), api_error_to_str(err), errno);
+    return;
+  }
+  ReadPacketBuffer buffer;
+  err = helper_->read_packet(&buffer);
+  if (err == APIError::WOULD_BLOCK) {
+    // pass
+  } else if (err != APIError::OK) {
+    on_fatal_error();
+    if (err == APIError::SOCKET_READ_FAILED && errno == ECONNRESET) {
+      ESP_LOGW(TAG, "%s: Connection reset", client_info_.c_str());
+    } else if (err == APIError::CONNECTION_CLOSED) {
+      ESP_LOGW(TAG, "%s: Connection closed", client_info_.c_str());
+    } else {
+      ESP_LOGW(TAG, "%s: Reading failed: %s errno=%d", client_info_.c_str(), api_error_to_str(err), errno);
+    }
+    return;
+  } else {
+    this->last_traffic_ = millis();
+    // read a packet
+    this->read_message(buffer.data_len, buffer.type, &buffer.container[buffer.data_offset]);
+    if (this->remove_)
+      return;
+  }
 
   this->list_entities_iterator_.advance();
   this->initial_state_iterator_.advance();
 
   const uint32_t keepalive = 60000;
+  const uint32_t now = millis();
   if (this->sent_ping_) {
     // Disconnect if not responded within 2.5*keepalive
-    if (millis() - this->last_traffic_ > (keepalive * 5) / 2) {
-      ESP_LOGW(TAG, "'%s' didn't respond to ping request in time. Disconnecting...", this->client_info_.c_str());
-      this->disconnect_client();
+    if (now - this->last_traffic_ > (keepalive * 5) / 2) {
+      on_fatal_error();
+      ESP_LOGW(TAG, "%s didn't respond to ping request in time. Disconnecting...", this->client_info_.c_str());
     }
-  } else if (millis() - this->last_traffic_ > keepalive) {
+  } else if (now - this->last_traffic_ > keepalive) {
+    ESP_LOGVV(TAG, "Sending keepalive PING...");
     this->sent_ping_ = true;
     this->send_ping_request(PingRequest());
   }
 
 #ifdef USE_ESP32_CAMERA
-  if (this->image_reader_.available()) {
-    uint32_t space = this->client_->space();
-    // reserve 15 bytes for metadata, and at least 64 bytes of data
-    if (space >= 15 + 64) {
-      uint32_t to_send = std::min(space - 15, this->image_reader_.available());
-      auto buffer = this->create_buffer();
-      // fixed32 key = 1;
-      buffer.encode_fixed32(1, esp32_camera::global_esp32_camera->get_object_id_hash());
-      // bytes data = 2;
-      buffer.encode_bytes(2, this->image_reader_.peek_data_buffer(), to_send);
-      // bool done = 3;
-      bool done = this->image_reader_.available() == to_send;
-      buffer.encode_bool(3, done);
-      bool success = this->send_buffer(buffer, 44);
+  if (this->image_reader_.available() && this->helper_->can_write_without_blocking()) {
+    uint32_t to_send = std::min((size_t) 1024, this->image_reader_.available());
+    auto buffer = this->create_buffer();
+    // fixed32 key = 1;
+    buffer.encode_fixed32(1, esp32_camera::global_esp32_camera->get_object_id_hash());
+    // bytes data = 2;
+    buffer.encode_bytes(2, this->image_reader_.peek_data_buffer(), to_send);
+    // bool done = 3;
+    bool done = this->image_reader_.available() == to_send;
+    buffer.encode_bool(3, done);
+    bool success = this->send_buffer(buffer, 44);
 
-      if (success) {
-        this->image_reader_.consume_data(to_send);
-      }
-      if (success && done) {
-        this->image_reader_.return_image();
-      }
+    if (success) {
+      this->image_reader_.consume_data(to_send);
+    }
+    if (success && done) {
+      this->image_reader_.return_image();
     }
   }
 #endif
+
+  if (state_subs_at_ != -1) {
+    const auto &subs = this->parent_->get_state_subs();
+    if (state_subs_at_ >= (int) subs.size()) {
+      state_subs_at_ = -1;
+    } else {
+      auto &it = subs[state_subs_at_];
+      SubscribeHomeAssistantStateResponse resp;
+      resp.entity_id = it.entity_id;
+      resp.attribute = it.attribute.value();
+      if (this->send_subscribe_home_assistant_state_response(resp)) {
+        state_subs_at_++;
+      }
+    }
+  }
 }
 
-std::string get_default_unique_id(const std::string &component_type, Nameable *nameable) {
-  return App.get_name() + component_type + nameable->get_object_id();
+std::string get_default_unique_id(const std::string &component_type, EntityBase *entity) {
+  return App.get_name() + component_type + entity->get_object_id();
+}
+
+DisconnectResponse APIConnection::disconnect(const DisconnectRequest &msg) {
+  // remote initiated disconnect_client
+  // don't close yet, we still need to send the disconnect response
+  // close will happen on next loop
+  ESP_LOGD(TAG, "%s requested disconnected", client_info_.c_str());
+  this->next_close_ = true;
+  DisconnectResponse resp;
+  return resp;
+}
+void APIConnection::on_disconnect_response(const DisconnectResponse &value) {
+  // pass
 }
 
 #ifdef USE_BINARY_SENSOR
@@ -177,6 +182,8 @@ bool APIConnection::send_binary_sensor_info(binary_sensor::BinarySensor *binary_
   msg.device_class = binary_sensor->get_device_class();
   msg.is_status_binary_sensor = binary_sensor->is_status_binary_sensor();
   msg.disabled_by_default = binary_sensor->is_disabled_by_default();
+  msg.icon = binary_sensor->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(binary_sensor->get_entity_category());
   return this->send_list_entities_binary_sensor_response(msg);
 }
 #endif
@@ -209,6 +216,8 @@ bool APIConnection::send_cover_info(cover::Cover *cover) {
   msg.supports_tilt = traits.get_supports_tilt();
   msg.device_class = cover->get_device_class();
   msg.disabled_by_default = cover->is_disabled_by_default();
+  msg.icon = cover->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(cover->get_entity_category());
   return this->send_list_entities_cover_response(msg);
 }
 void APIConnection::cover_command(const CoverCommandRequest &msg) {
@@ -241,7 +250,7 @@ void APIConnection::cover_command(const CoverCommandRequest &msg) {
 #endif
 
 #ifdef USE_FAN
-bool APIConnection::send_fan_state(fan::FanState *fan) {
+bool APIConnection::send_fan_state(fan::Fan *fan) {
   if (!this->state_subscription_)
     return false;
 
@@ -253,13 +262,12 @@ bool APIConnection::send_fan_state(fan::FanState *fan) {
     resp.oscillating = fan->oscillating;
   if (traits.supports_speed()) {
     resp.speed_level = fan->speed;
-    resp.speed = static_cast<enums::FanSpeed>(fan::speed_level_to_enum(fan->speed, traits.supported_speed_count()));
   }
   if (traits.supports_direction())
     resp.direction = static_cast<enums::FanDirection>(fan->direction);
   return this->send_fan_state_response(resp);
 }
-bool APIConnection::send_fan_info(fan::FanState *fan) {
+bool APIConnection::send_fan_info(fan::Fan *fan) {
   auto traits = fan->get_traits();
   ListEntitiesFanResponse msg;
   msg.key = fan->get_object_id_hash();
@@ -271,15 +279,15 @@ bool APIConnection::send_fan_info(fan::FanState *fan) {
   msg.supports_direction = traits.supports_direction();
   msg.supported_speed_count = traits.supported_speed_count();
   msg.disabled_by_default = fan->is_disabled_by_default();
+  msg.icon = fan->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(fan->get_entity_category());
   return this->send_list_entities_fan_response(msg);
 }
 void APIConnection::fan_command(const FanCommandRequest &msg) {
-  fan::FanState *fan = App.get_fan_by_key(msg.key);
+  fan::Fan *fan = App.get_fan_by_key(msg.key);
   if (fan == nullptr)
     return;
 
-  auto traits = fan->get_traits();
-
   auto call = fan->make_call();
   if (msg.has_state)
     call.set_state(msg.state);
@@ -288,8 +296,6 @@ void APIConnection::fan_command(const FanCommandRequest &msg) {
   if (msg.has_speed_level) {
     // Prefer level
     call.set_speed(msg.speed_level);
-  } else if (msg.has_speed) {
-    call.set_speed(fan::speed_enum_to_level(static_cast<fan::FanSpeed>(msg.speed), traits.supported_speed_count()));
   }
   if (msg.has_direction)
     call.set_direction(static_cast<fan::FanDirection>(msg.direction));
@@ -332,6 +338,8 @@ bool APIConnection::send_light_info(light::LightState *light) {
   msg.unique_id = get_default_unique_id("light", light);
 
   msg.disabled_by_default = light->is_disabled_by_default();
+  msg.icon = light->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(light->get_entity_category());
 
   for (auto mode : traits.get_supported_color_modes())
     msg.supported_color_modes.push_back(static_cast<enums::ColorMode>(mode));
@@ -416,10 +424,9 @@ bool APIConnection::send_sensor_info(sensor::Sensor *sensor) {
   msg.accuracy_decimals = sensor->get_accuracy_decimals();
   msg.force_update = sensor->get_force_update();
   msg.device_class = sensor->get_device_class();
-  msg.state_class = static_cast<enums::SensorStateClass>(sensor->state_class);
-  msg.last_reset_type = static_cast<enums::SensorLastResetType>(sensor->last_reset_type);
+  msg.state_class = static_cast<enums::SensorStateClass>(sensor->get_state_class());
   msg.disabled_by_default = sensor->is_disabled_by_default();
-
+  msg.entity_category = static_cast<enums::EntityCategory>(sensor->get_entity_category());
   return this->send_list_entities_sensor_response(msg);
 }
 #endif
@@ -443,6 +450,8 @@ bool APIConnection::send_switch_info(switch_::Switch *a_switch) {
   msg.icon = a_switch->get_icon();
   msg.assumed_state = a_switch->assumed_state();
   msg.disabled_by_default = a_switch->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(a_switch->get_entity_category());
+  msg.device_class = a_switch->get_device_class();
   return this->send_list_entities_switch_response(msg);
 }
 void APIConnection::switch_command(const SwitchCommandRequest &msg) {
@@ -450,10 +459,11 @@ void APIConnection::switch_command(const SwitchCommandRequest &msg) {
   if (a_switch == nullptr)
     return;
 
-  if (msg.state)
+  if (msg.state) {
     a_switch->turn_on();
-  else
+  } else {
     a_switch->turn_off();
+  }
 }
 #endif
 
@@ -478,6 +488,7 @@ bool APIConnection::send_text_sensor_info(text_sensor::TextSensor *text_sensor)
     msg.unique_id = get_default_unique_id("text_sensor", text_sensor);
   msg.icon = text_sensor->get_icon();
   msg.disabled_by_default = text_sensor->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(text_sensor->get_entity_category());
   return this->send_list_entities_text_sensor_response(msg);
 }
 #endif
@@ -523,6 +534,8 @@ bool APIConnection::send_climate_info(climate::Climate *climate) {
   msg.unique_id = get_default_unique_id("climate", climate);
 
   msg.disabled_by_default = climate->is_disabled_by_default();
+  msg.icon = climate->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(climate->get_entity_category());
 
   msg.supports_current_temperature = traits.get_supports_current_temperature();
   msg.supports_two_point_target_temperature = traits.get_supports_two_point_target_temperature();
@@ -595,8 +608,11 @@ bool APIConnection::send_number_info(number::Number *number) {
   msg.object_id = number->get_object_id();
   msg.name = number->get_name();
   msg.unique_id = get_default_unique_id("number", number);
-  msg.icon = number->traits.get_icon();
+  msg.icon = number->get_icon();
   msg.disabled_by_default = number->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(number->get_entity_category());
+  msg.unit_of_measurement = number->traits.get_unit_of_measurement();
+  msg.mode = static_cast<enums::NumberMode>(number->traits.get_mode());
 
   msg.min_value = number->traits.get_min_value();
   msg.max_value = number->traits.get_max_value();
@@ -632,8 +648,9 @@ bool APIConnection::send_select_info(select::Select *select) {
   msg.object_id = select->get_object_id();
   msg.name = select->get_name();
   msg.unique_id = get_default_unique_id("select", select);
-  msg.icon = select->traits.get_icon();
+  msg.icon = select->get_icon();
   msg.disabled_by_default = select->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(select->get_entity_category());
 
   for (const auto &option : select->traits.get_options())
     msg.options.push_back(option);
@@ -651,13 +668,126 @@ void APIConnection::select_command(const SelectCommandRequest &msg) {
 }
 #endif
 
+#ifdef USE_BUTTON
+bool APIConnection::send_button_info(button::Button *button) {
+  ListEntitiesButtonResponse msg;
+  msg.key = button->get_object_id_hash();
+  msg.object_id = button->get_object_id();
+  msg.name = button->get_name();
+  msg.unique_id = get_default_unique_id("button", button);
+  msg.icon = button->get_icon();
+  msg.disabled_by_default = button->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(button->get_entity_category());
+  msg.device_class = button->get_device_class();
+  return this->send_list_entities_button_response(msg);
+}
+void APIConnection::button_command(const ButtonCommandRequest &msg) {
+  button::Button *button = App.get_button_by_key(msg.key);
+  if (button == nullptr)
+    return;
+
+  button->press();
+}
+#endif
+
+#ifdef USE_LOCK
+bool APIConnection::send_lock_state(lock::Lock *a_lock, lock::LockState state) {
+  if (!this->state_subscription_)
+    return false;
+
+  LockStateResponse resp{};
+  resp.key = a_lock->get_object_id_hash();
+  resp.state = static_cast<enums::LockState>(state);
+  return this->send_lock_state_response(resp);
+}
+bool APIConnection::send_lock_info(lock::Lock *a_lock) {
+  ListEntitiesLockResponse msg;
+  msg.key = a_lock->get_object_id_hash();
+  msg.object_id = a_lock->get_object_id();
+  msg.name = a_lock->get_name();
+  msg.unique_id = get_default_unique_id("lock", a_lock);
+  msg.icon = a_lock->get_icon();
+  msg.assumed_state = a_lock->traits.get_assumed_state();
+  msg.disabled_by_default = a_lock->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(a_lock->get_entity_category());
+  msg.supports_open = a_lock->traits.get_supports_open();
+  msg.requires_code = a_lock->traits.get_requires_code();
+  return this->send_list_entities_lock_response(msg);
+}
+void APIConnection::lock_command(const LockCommandRequest &msg) {
+  lock::Lock *a_lock = App.get_lock_by_key(msg.key);
+  if (a_lock == nullptr)
+    return;
+
+  switch (msg.command) {
+    case enums::LOCK_UNLOCK:
+      a_lock->unlock();
+      break;
+    case enums::LOCK_LOCK:
+      a_lock->lock();
+      break;
+    case enums::LOCK_OPEN:
+      a_lock->open();
+      break;
+  }
+}
+#endif
+
+#ifdef USE_MEDIA_PLAYER
+bool APIConnection::send_media_player_state(media_player::MediaPlayer *media_player) {
+  if (!this->state_subscription_)
+    return false;
+
+  MediaPlayerStateResponse resp{};
+  resp.key = media_player->get_object_id_hash();
+  resp.state = static_cast<enums::MediaPlayerState>(media_player->state);
+  resp.volume = media_player->volume;
+  resp.muted = media_player->is_muted();
+  return this->send_media_player_state_response(resp);
+}
+bool APIConnection::send_media_player_info(media_player::MediaPlayer *media_player) {
+  ListEntitiesMediaPlayerResponse msg;
+  msg.key = media_player->get_object_id_hash();
+  msg.object_id = media_player->get_object_id();
+  msg.name = media_player->get_name();
+  msg.unique_id = get_default_unique_id("media_player", media_player);
+  msg.icon = media_player->get_icon();
+  msg.disabled_by_default = media_player->is_disabled_by_default();
+  msg.entity_category = static_cast<enums::EntityCategory>(media_player->get_entity_category());
+
+  auto traits = media_player->get_traits();
+  msg.supports_pause = traits.get_supports_pause();
+
+  return this->send_list_entities_media_player_response(msg);
+}
+void APIConnection::media_player_command(const MediaPlayerCommandRequest &msg) {
+  media_player::MediaPlayer *media_player = App.get_media_player_by_key(msg.key);
+  if (media_player == nullptr)
+    return;
+
+  auto call = media_player->make_call();
+  if (msg.has_command) {
+    call.set_command(static_cast<media_player::MediaPlayerCommand>(msg.command));
+  }
+  if (msg.has_volume) {
+    call.set_volume(msg.volume);
+  }
+  if (msg.has_media_url) {
+    call.set_media_url(msg.media_url);
+  }
+  call.perform();
+}
+#endif
+
 #ifdef USE_ESP32_CAMERA
 void APIConnection::send_camera_state(std::shared_ptr<esp32_camera::CameraImage> image) {
   if (!this->state_subscription_)
     return;
   if (this->image_reader_.available())
     return;
-  this->image_reader_.set_image(image);
+  if (image->was_requested_by(esphome::esp32_camera::API_REQUESTER) ||
+      image->was_requested_by(esphome::esp32_camera::IDLE))
+    this->image_reader_.set_image(std::move(image));
 }
 bool APIConnection::send_camera_info(esp32_camera::ESP32Camera *camera) {
   ListEntitiesCameraResponse msg;
@@ -666,6 +796,8 @@ bool APIConnection::send_camera_info(esp32_camera::ESP32Camera *camera) {
   msg.name = camera->get_name();
   msg.unique_id = get_default_unique_id("camera", camera);
   msg.disabled_by_default = camera->is_disabled_by_default();
+  msg.icon = camera->get_icon();
+  msg.entity_category = static_cast<enums::EntityCategory>(camera->get_entity_category());
   return this->send_list_entities_camera_response(msg);
 }
 void APIConnection::camera_image(const CameraImageRequest &msg) {
@@ -673,9 +805,14 @@ void APIConnection::camera_image(const CameraImageRequest &msg) {
     return;
 
   if (msg.single)
-    esp32_camera::global_esp32_camera->request_image();
-  if (msg.stream)
-    esp32_camera::global_esp32_camera->request_stream();
+    esp32_camera::global_esp32_camera->request_image(esphome::esp32_camera::API_REQUESTER);
+  if (msg.stream) {
+    esp32_camera::global_esp32_camera->start_stream(esphome::esp32_camera::API_REQUESTER);
+
+    App.scheduler.set_timeout(this->parent_, "api_esp32_camera_stop_stream", ESP32_CAMERA_STOP_STREAM, []() {
+      esp32_camera::global_esp32_camera->stop_stream(esphome::esp32_camera::API_REQUESTER);
+    });
+  }
 }
 #endif
 
@@ -697,26 +834,20 @@ bool APIConnection::send_log_message(int level, const char *tag, const char *lin
   // string message = 3;
   buffer.encode_string(3, line, strlen(line));
   // SubscribeLogsResponse - 29
-  bool success = this->send_buffer(buffer, 29);
-  if (!success) {
-    buffer = this->create_buffer();
-    // bool send_failed = 4;
-    buffer.encode_bool(4, true);
-    return this->send_buffer(buffer, 29);
-  } else {
-    return true;
-  }
+  return this->send_buffer(buffer, 29);
 }
 
 HelloResponse APIConnection::hello(const HelloRequest &msg) {
-  this->client_info_ = msg.client_info + " (" + this->client_->remoteIP().toString().c_str();
-  this->client_info_ += ")";
+  this->client_info_ = msg.client_info + " (" + this->helper_->getpeername() + ")";
+  this->helper_->set_log_info(client_info_);
   ESP_LOGV(TAG, "Hello from client: '%s'", this->client_info_.c_str());
 
   HelloResponse resp;
   resp.api_version_major = 1;
   resp.api_version_minor = 6;
   resp.server_info = App.get_name() + " (esphome v" ESPHOME_VERSION ")";
+  resp.name = App.get_name();
+
   this->connection_state_ = ConnectionState::CONNECTED;
   return resp;
 }
@@ -727,7 +858,7 @@ ConnectResponse APIConnection::connect(const ConnectRequest &msg) {
   // bool invalid_password = 1;
   resp.invalid_password = !correct;
   if (correct) {
-    ESP_LOGD(TAG, "Client '%s' connected successfully!", this->client_info_.c_str());
+    ESP_LOGD(TAG, "%s: Connected successfully", this->client_info_.c_str());
     this->connection_state_ = ConnectionState::AUTHENTICATED;
 
 #ifdef USE_HOMEASSISTANT_TIME
@@ -745,23 +876,25 @@ DeviceInfoResponse APIConnection::device_info(const DeviceInfoRequest &msg) {
   resp.mac_address = get_mac_address_pretty();
   resp.esphome_version = ESPHOME_VERSION;
   resp.compilation_time = App.get_compilation_time();
-#ifdef ARDUINO_BOARD
-  resp.model = ARDUINO_BOARD;
-#endif
+  resp.model = ESPHOME_BOARD;
 #ifdef USE_DEEP_SLEEP
   resp.has_deep_sleep = deep_sleep::global_has_deep_sleep;
 #endif
 #ifdef ESPHOME_PROJECT_NAME
   resp.project_name = ESPHOME_PROJECT_NAME;
   resp.project_version = ESPHOME_PROJECT_VERSION;
+#endif
+#ifdef USE_WEBSERVER
+  resp.webserver_port = USE_WEBSERVER_PORT;
 #endif
   return resp;
 }
 void APIConnection::on_home_assistant_state_response(const HomeAssistantStateResponse &msg) {
-  for (auto &it : this->parent_->get_state_subs())
+  for (auto &it : this->parent_->get_state_subs()) {
     if (it.entity_id == msg.entity_id && it.attribute.value() == msg.attribute) {
       it.callback(msg.state);
     }
+  }
 }
 void APIConnection::execute_service(const ExecuteServiceRequest &msg) {
   bool found = false;
@@ -775,30 +908,20 @@ void APIConnection::execute_service(const ExecuteServiceRequest &msg) {
   }
 }
 void APIConnection::subscribe_home_assistant_states(const SubscribeHomeAssistantStatesRequest &msg) {
-  for (auto &it : this->parent_->get_state_subs()) {
-    SubscribeHomeAssistantStateResponse resp;
-    resp.entity_id = it.entity_id;
-    resp.attribute = it.attribute.value();
-    if (!this->send_subscribe_home_assistant_state_response(resp)) {
-      this->on_fatal_error();
-      return;
-    }
-  }
+  state_subs_at_ = 0;
 }
 bool APIConnection::send_buffer(ProtoWriteBuffer buffer, uint32_t message_type) {
   if (this->remove_)
     return false;
-
-  std::vector<uint8_t> header;
-  header.push_back(0x00);
-  ProtoVarInt(buffer.get_buffer()->size()).encode(header);
-  ProtoVarInt(message_type).encode(header);
-
-  size_t needed_space = buffer.get_buffer()->size() + header.size();
-
-  if (needed_space > this->client_->space()) {
+  if (!this->helper_->can_write_without_blocking()) {
     delay(0);
-    if (needed_space > this->client_->space()) {
+    APIError err = helper_->loop();
+    if (err != APIError::OK) {
+      on_fatal_error();
+      ESP_LOGW(TAG, "%s: Socket operation failed: %s errno=%d", client_info_.c_str(), api_error_to_str(err), errno);
+      return false;
+    }
+    if (!this->helper_->can_write_without_blocking()) {
       // SubscribeLogsResponse
       if (message_type != 29) {
         ESP_LOGV(TAG, "Cannot send message because of TCP buffer space");
@@ -808,24 +931,31 @@ bool APIConnection::send_buffer(ProtoWriteBuffer buffer, uint32_t message_type)
     }
   }
 
-  this->client_->add(reinterpret_cast<char *>(header.data()), header.size(),
-                     ASYNC_WRITE_FLAG_COPY | ASYNC_WRITE_FLAG_MORE);
-  this->client_->add(reinterpret_cast<char *>(buffer.get_buffer()->data()), buffer.get_buffer()->size(),
-                     ASYNC_WRITE_FLAG_COPY);
-  bool ret = this->client_->send();
-  return ret;
+  APIError err = this->helper_->write_packet(message_type, buffer.get_buffer()->data(), buffer.get_buffer()->size());
+  if (err == APIError::WOULD_BLOCK)
+    return false;
+  if (err != APIError::OK) {
+    on_fatal_error();
+    if (err == APIError::SOCKET_WRITE_FAILED && errno == ECONNRESET) {
+      ESP_LOGW(TAG, "%s: Connection reset", client_info_.c_str());
+    } else {
+      ESP_LOGW(TAG, "%s: Packet write failed %s errno=%d", client_info_.c_str(), api_error_to_str(err), errno);
+    }
+    return false;
+  }
+  // Do not set last_traffic_ on send
+  return true;
 }
 void APIConnection::on_unauthenticated_access() {
-  ESP_LOGD(TAG, "'%s' tried to access without authentication.", this->client_info_.c_str());
   this->on_fatal_error();
+  ESP_LOGD(TAG, "%s: tried to access without authentication.", this->client_info_.c_str());
 }
 void APIConnection::on_no_setup_connection() {
-  ESP_LOGD(TAG, "'%s' tried to access without full connection.", this->client_info_.c_str());
   this->on_fatal_error();
+  ESP_LOGD(TAG, "%s: tried to access without full connection.", this->client_info_.c_str());
 }
 void APIConnection::on_fatal_error() {
-  ESP_LOGV(TAG, "Error: Disconnecting %s", this->client_info_.c_str());
-  this->client_->close();
+  this->helper_->close();
   this->remove_ = true;
 }