[nrf52,watchdog] do not disable watchog if it is not nesesery (#11686)

esphome/components/debug/__init__.py

@@ -59,6 +59,7 @@ async def to_code(config):
         zephyr_add_prj_conf("SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL", True)
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
+    cg.add_define("USE_DEBUG")
 
 
 FILTER_SOURCE_FILES = filter_source_files_from_platform(

esphome/components/sx126x/__init__.py

@@ -189,7 +189,7 @@ CONFIG_SCHEMA = (
             cv.GenerateID(): cv.declare_id(SX126x),
             cv.Optional(CONF_BANDWIDTH, default="125_0kHz"): cv.enum(BW),
             cv.Optional(CONF_BITRATE, default=4800): cv.int_range(min=600, max=300000),
-            cv.Required(CONF_BUSY_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Required(CONF_BUSY_PIN): pins.gpio_input_pin_schema,
             cv.Optional(CONF_CODING_RATE, default="CR_4_5"): cv.enum(CODING_RATE),
             cv.Optional(CONF_CRC_ENABLE, default=False): cv.boolean,
             cv.Optional(CONF_CRC_INVERTED, default=True): cv.boolean,
@@ -201,7 +201,7 @@ CONFIG_SCHEMA = (
                 cv.hex_int, cv.Range(min=0, max=0xFFFF)
             ),
             cv.Optional(CONF_DEVIATION, default=5000): cv.int_range(min=0, max=100000),
-            cv.Required(CONF_DIO1_PIN): pins.internal_gpio_input_pin_schema,
+            cv.Required(CONF_DIO1_PIN): pins.gpio_input_pin_schema,
             cv.Required(CONF_FREQUENCY): cv.int_range(min=137000000, max=1020000000),
             cv.Required(CONF_HW_VERSION): cv.one_of(
                 "sx1261", "sx1262", "sx1268", "llcc68", lower=True
@@ -213,7 +213,7 @@ CONFIG_SCHEMA = (
             cv.Optional(CONF_PAYLOAD_LENGTH, default=0): cv.int_range(min=0, max=256),
             cv.Optional(CONF_PREAMBLE_DETECT, default=2): cv.int_range(min=0, max=4),
             cv.Optional(CONF_PREAMBLE_SIZE, default=8): cv.int_range(min=1, max=65535),
-            cv.Required(CONF_RST_PIN): pins.internal_gpio_output_pin_schema,
+            cv.Required(CONF_RST_PIN): pins.gpio_output_pin_schema,
             cv.Optional(CONF_RX_START, default=True): cv.boolean,
             cv.Required(CONF_RF_SWITCH): cv.boolean,
             cv.Optional(CONF_SHAPING, default="NONE"): cv.enum(SHAPING),

esphome/components/sx126x/sx126x.h

@@ -64,7 +64,7 @@ class SX126x : public Component,
   void dump_config() override;
   void set_bandwidth(SX126xBw bandwidth) { this->bandwidth_ = bandwidth; }
   void set_bitrate(uint32_t bitrate) { this->bitrate_ = bitrate; }
-  void set_busy_pin(InternalGPIOPin *busy_pin) { this->busy_pin_ = busy_pin; }
+  void set_busy_pin(GPIOPin *busy_pin) { this->busy_pin_ = busy_pin; }
   void set_coding_rate(uint8_t coding_rate) { this->coding_rate_ = coding_rate; }
   void set_crc_enable(bool crc_enable) { this->crc_enable_ = crc_enable; }
   void set_crc_inverted(bool crc_inverted) { this->crc_inverted_ = crc_inverted; }
@@ -72,7 +72,7 @@ class SX126x : public Component,
   void set_crc_polynomial(uint16_t crc_polynomial) { this->crc_polynomial_ = crc_polynomial; }
   void set_crc_initial(uint16_t crc_initial) { this->crc_initial_ = crc_initial; }
   void set_deviation(uint32_t deviation) { this->deviation_ = deviation; }
-  void set_dio1_pin(InternalGPIOPin *dio1_pin) { this->dio1_pin_ = dio1_pin; }
+  void set_dio1_pin(GPIOPin *dio1_pin) { this->dio1_pin_ = dio1_pin; }
   void set_frequency(uint32_t frequency) { this->frequency_ = frequency; }
   void set_hw_version(const std::string &hw_version) { this->hw_version_ = hw_version; }
   void set_mode_rx();
@@ -85,7 +85,7 @@ class SX126x : public Component,
   void set_payload_length(uint8_t payload_length) { this->payload_length_ = payload_length; }
   void set_preamble_detect(uint16_t preamble_detect) { this->preamble_detect_ = preamble_detect; }
   void set_preamble_size(uint16_t preamble_size) { this->preamble_size_ = preamble_size; }
-  void set_rst_pin(InternalGPIOPin *rst_pin) { this->rst_pin_ = rst_pin; }
+  void set_rst_pin(GPIOPin *rst_pin) { this->rst_pin_ = rst_pin; }
   void set_rx_start(bool rx_start) { this->rx_start_ = rx_start; }
   void set_rf_switch(bool rf_switch) { this->rf_switch_ = rf_switch; }
   void set_shaping(uint8_t shaping) { this->shaping_ = shaping; }
@@ -115,9 +115,9 @@ class SX126x : public Component,
   std::vector<SX126xListener *> listeners_;
   std::vector<uint8_t> packet_;
   std::vector<uint8_t> sync_value_;
-  InternalGPIOPin *busy_pin_{nullptr};
-  InternalGPIOPin *dio1_pin_{nullptr};
-  InternalGPIOPin *rst_pin_{nullptr};
+  GPIOPin *busy_pin_{nullptr};
+  GPIOPin *dio1_pin_{nullptr};
+  GPIOPin *rst_pin_{nullptr};
   std::string hw_version_;
   char version_[16];
   SX126xBw bandwidth_{SX126X_BW_125000};

esphome/components/zephyr/core.cpp

@@ -6,6 +6,7 @@
 #include <zephyr/random/random.h>
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
+#include "esphome/core/defines.h"
 
 namespace esphome {
 
@@ -25,7 +26,14 @@ void arch_init() {
     wdt_config.window.max = 2000;
     wdt_channel_id = wdt_install_timeout(WDT, &wdt_config);
     if (wdt_channel_id >= 0) {
-      wdt_setup(WDT, WDT_OPT_PAUSE_HALTED_BY_DBG | WDT_OPT_PAUSE_IN_SLEEP);
+      uint8_t options = 0;
+#ifdef USE_DEBUG
+      options |= WDT_OPT_PAUSE_HALTED_BY_DBG;
+#endif
+#ifdef USE_DEEP_SLEEP
+      options |= WDT_OPT_PAUSE_IN_SLEEP;
+#endif
+      wdt_setup(WDT, options);
     }
   }
 }

esphome/core/defines.h

@@ -34,6 +34,7 @@
 #define USE_DATETIME_DATE
 #define USE_DATETIME_DATETIME
 #define USE_DATETIME_TIME
+#define USE_DEBUG
 #define USE_DEEP_SLEEP
 #define USE_DEVICES
 #define USE_DISPLAY

tests/components/api/common-base.yaml

@@ -178,6 +178,14 @@ api:
               - logger.log: "Skipped loops"
         - logger.log: "After combined test"
 
+event:
+  - platform: template
+    name: Test Event
+    id: test_event
+    event_types:
+      - single_click
+      - double_click
+
 globals:
   - id: api_continuation_test_counter
     type: int