revert workarounds now that libretiny v1.12.1 is released

Co-authored-by: J. Nick Koston <nick@koston.org>

.clang-tidy.hash

@@ -1 +1 @@
-069fa9526c52f7c580a9ec17c7678d12f142221387e9b561c18f95394d4629a3
+0f2b9a65dce7c59289d3aeb40936360a62a7be937b585147b45bb1509eaafb36

esphome/components/bk72xx/boards.py

@@ -159,6 +159,10 @@ BK72XX_BOARD_PINS = {
         "A0": 23,
     },
     "cbu": {
+        "SPI0_CS": 15,
+        "SPI0_MISO": 17,
+        "SPI0_MOSI": 16,
+        "SPI0_SCK": 14,
         "WIRE1_SCL": 20,
         "WIRE1_SDA": 21,
         "WIRE2_SCL": 0,
@@ -227,6 +231,10 @@ BK72XX_BOARD_PINS = {
         "A0": 23,
     },
     "generic-bk7231t-qfn32-tuya": {
+        "SPI0_CS": 15,
+        "SPI0_MISO": 17,
+        "SPI0_MOSI": 16,
+        "SPI0_SCK": 14,
         "WIRE1_SCL": 20,
         "WIRE1_SDA": 21,
         "WIRE2_SCL": 0,
@@ -295,6 +303,10 @@ BK72XX_BOARD_PINS = {
         "A0": 23,
     },
     "generic-bk7231n-qfn32-tuya": {
+        "SPI0_CS": 15,
+        "SPI0_MISO": 17,
+        "SPI0_MOSI": 16,
+        "SPI0_SCK": 14,
         "WIRE1_SCL": 20,
         "WIRE1_SDA": 21,
         "WIRE2_SCL": 0,
@@ -485,8 +497,7 @@ BK72XX_BOARD_PINS = {
     },
     "cb3s": {
         "WIRE1_SCL": 20,
-        "WIRE1_SDA_0": 21,
-        "WIRE1_SDA_1": 21,
+        "WIRE1_SDA": 21,
         "SERIAL1_RX": 10,
         "SERIAL1_TX": 11,
         "SERIAL2_TX": 0,
@@ -647,6 +658,10 @@ BK72XX_BOARD_PINS = {
         "A0": 23,
     },
     "generic-bk7252": {
+        "SPI0_CS": 15,
+        "SPI0_MISO": 17,
+        "SPI0_MOSI": 16,
+        "SPI0_SCK": 14,
         "WIRE1_SCL": 20,
         "WIRE1_SDA": 21,
         "WIRE2_SCL": 0,
@@ -1096,6 +1111,10 @@ BK72XX_BOARD_PINS = {
         "A0": 23,
     },
     "cb3se": {
+        "SPI0_CS": 15,
+        "SPI0_MISO": 17,
+        "SPI0_MOSI": 16,
+        "SPI0_SCK": 14,
         "WIRE2_SCL": 0,
         "WIRE2_SDA": 1,
         "SERIAL1_RX": 10,

esphome/components/dsmr/__init__.py

@@ -66,7 +66,7 @@ async def to_code(config):
     cg.add_build_flag("-DDSMR_WATER_MBUS_ID=" + str(config[CONF_WATER_MBUS_ID]))
 
     # DSMR Parser
-    cg.add_library("esphome/dsmr_parser", "1.0.0")
+    cg.add_library("esphome/dsmr_parser", "1.1.0")
 
     # Crypto
     cg.add_library("polargoose/Crypto-no-arduino", "0.4.0")

esphome/components/dsmr/sensor.py

@@ -718,14 +718,6 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
-        cv.Optional("fw_core_version"): sensor.sensor_schema(
-            accuracy_decimals=3,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
-        cv.Optional("fw_module_version"): sensor.sensor_schema(
-            accuracy_decimals=3,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 

esphome/components/dsmr/text_sensor.py

@@ -26,7 +26,9 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional("sub_equipment_id"): text_sensor.text_sensor_schema(),
         cv.Optional("gas_delivered_text"): text_sensor.text_sensor_schema(),
         cv.Optional("fw_core_checksum"): text_sensor.text_sensor_schema(),
+        cv.Optional("fw_core_version"): text_sensor.text_sensor_schema(),
         cv.Optional("fw_module_checksum"): text_sensor.text_sensor_schema(),
+        cv.Optional("fw_module_version"): text_sensor.text_sensor_schema(),
         cv.Optional("telegram"): text_sensor.text_sensor_schema().extend(
             {cv.Optional(CONF_INTERNAL, default=True): cv.boolean}
         ),

esphome/components/epaper_spi/colorconv.h

@@ -0,0 +1,67 @@
+#pragma once
+
+#include <cstdint>
+#include <algorithm>
+#include "esphome/core/color.h"
+
+/* Utility for converting internal \a Color RGB representation to supported IC hardware color keys
+ *
+ * Focus in driver layer is on efficiency.
+ * For optimum output quality on RGB inputs consider offline color keying/dithering.
+ * Also see e.g. Image component.
+ */
+
+namespace esphome::epaper_spi {
+
+/** Delta for when to regard as gray */
+static constexpr uint8_t COLORCONV_GRAY_THRESHOLD = 50;
+
+/** Map RGB color to discrete BWYR hex 4 color key
+ *
+ * @tparam NATIVE_COLOR  Type of native hardware color values
+ * @param color     RGB color to convert from
+ * @param hw_black  Native value for black
+ * @param hw_white  Native value for white
+ * @param hw_yellow Native value for yellow
+ * @param hw_red    Native value for red
+ * @return          Converted native hardware color value
+ * @internal Constexpr. Does not depend on side effects ("pure").
+ */
+template<typename NATIVE_COLOR>
+constexpr NATIVE_COLOR color_to_bwyr(Color color, NATIVE_COLOR hw_black, NATIVE_COLOR hw_white, NATIVE_COLOR hw_yellow,
+                                     NATIVE_COLOR hw_red) {
+  // --- Step 1: Check for Grayscale (Black or White) ---
+  // We define "grayscale" as a color where the min and max components
+  // are close to each other.
+
+  const auto [min_rgb, max_rgb] = std::minmax({color.r, color.g, color.b});
+
+  if ((max_rgb - min_rgb) < COLORCONV_GRAY_THRESHOLD) {
+    // It's a shade of gray. Map to BLACK or WHITE.
+    // We split the luminance at the halfway point (382 = (255*3)/2)
+    if ((static_cast<int>(color.r) + color.g + color.b) > 382) {
+      return hw_white;
+    }
+    return hw_black;
+  }
+
+  // --- Step 2: Check for Primary/Secondary Colors ---
+  // If it's not gray, it's a color. We check which components are
+  // "on" (over 128) vs "off". This divides the RGB cube into 8 corners.
+  const bool r_on = (color.r > 128);
+  const bool g_on = (color.g > 128);
+  const bool b_on = (color.b > 128);
+
+  if (r_on) {
+    if (!b_on) {
+      return g_on ? hw_yellow : hw_red;
+    }
+
+    // At least red+blue high (but not gray) -> White
+    return hw_white;
+  } else {
+    return (b_on && g_on) ? hw_white : hw_black;
+  }
+}
+
+}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/epaper_spi_jd79660.cpp

@@ -0,0 +1,227 @@
+#include "epaper_spi_jd79660.h"
+#include "colorconv.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome::epaper_spi {
+static constexpr const char *const TAG = "epaper_spi.jd79660";
+
+/** Pixel color as 2bpp. Must match IC LUT values. */
+enum JD79660Color : uint8_t {
+  BLACK = 0b00,
+  WHITE = 0b01,
+  YELLOW = 0b10,
+  RED = 0b11,
+};
+
+/** Map RGB color to JD79660 BWYR hex color keys */
+static JD79660Color HOT color_to_hex(Color color) {
+  return color_to_bwyr(color, JD79660Color::BLACK, JD79660Color::WHITE, JD79660Color::YELLOW, JD79660Color::RED);
+}
+
+void EPaperJD79660::fill(Color color) {
+  // If clipping is active, fall back to base implementation
+  if (this->get_clipping().is_set()) {
+    EPaperBase::fill(color);
+    return;
+  }
+
+  const auto pixel_color = color_to_hex(color);
+
+  // We store 4 pixels per byte
+  this->buffer_.fill(pixel_color | (pixel_color << 2) | (pixel_color << 4) | (pixel_color << 6));
+}
+
+void HOT EPaperJD79660::draw_pixel_at(int x, int y, Color color) {
+  if (!this->rotate_coordinates_(x, y))
+    return;
+  const auto pixel_bits = color_to_hex(color);
+  const uint32_t pixel_position = x + y * this->get_width_internal();
+  // We store 4 pixels per byte at LSB offsets 6, 4, 2, 0
+  const uint32_t byte_position = pixel_position / 4;
+  const uint32_t bit_offset = 6 - ((pixel_position % 4) * 2);
+  const auto original = this->buffer_[byte_position];
+
+  this->buffer_[byte_position] = (original & (~(0b11 << bit_offset))) |  // mask old 2bpp
+                                 (pixel_bits << bit_offset);             // add new 2bpp
+}
+
+bool EPaperJD79660::reset() {
+  // On entry state RESET set step, next state will be RESET_END
+  if (this->state_ == EPaperState::RESET) {
+    this->step_ = FSMState::RESET_STEP0_H;
+  }
+
+  switch (this->step_) {
+    case FSMState::RESET_STEP0_H:
+      // Step #0: Reset H for some settle time.
+
+      ESP_LOGVV(TAG, "reset #0");
+      this->reset_pin_->digital_write(true);
+
+      this->reset_duration_ = SLEEP_MS_RESET0;
+      this->step_ = FSMState::RESET_STEP1_L;
+      return false;  // another loop: step #1 below
+
+    case FSMState::RESET_STEP1_L:
+      // Step #1: Reset L pulse for slightly >1.5ms.
+      // This is actual reset trigger.
+
+      ESP_LOGVV(TAG, "reset #1");
+
+      // As commented on SLEEP_MS_RESET1: Reset pulse must happen within time window.
+      // So do not use FSM loop, and avoid other calls/logs during pulse below.
+      this->reset_pin_->digital_write(false);
+      delay(SLEEP_MS_RESET1);
+      this->reset_pin_->digital_write(true);
+
+      this->reset_duration_ = SLEEP_MS_RESET2;
+      this->step_ = FSMState::RESET_STEP2_IDLECHECK;
+      return false;  // another loop: step #2 below
+
+    case FSMState::RESET_STEP2_IDLECHECK:
+      // Step #2: Basically finished. Check sanity, and move FSM to INITIALISE state
+      ESP_LOGVV(TAG, "reset #2");
+
+      if (!this->is_idle_()) {
+        // Expectation: Idle after reset + settle time.
+        // Improperly connected/unexpected hardware?
+        // Error path reproducable e.g. with disconnected VDD/... pins
+        // (optimally while busy_pin configured with local pulldown).
+        // -> Mark failed to avoid followup problems.
+        this->mark_failed(LOG_STR("Busy after reset"));
+      }
+      break;  // End state loop below
+
+    default:
+      // Unexpected step = bug?
+      this->mark_failed();
+  }
+
+  this->step_ = FSMState::INIT_STEP0_REGULARINIT;  // reset for initialize state
+  return true;
+}
+
+bool EPaperJD79660::initialise(bool partial) {
+  switch (this->step_) {
+    case FSMState::INIT_STEP0_REGULARINIT:
+      // Step #0: Regular init sequence
+      ESP_LOGVV(TAG, "init #0");
+      if (!EPaperBase::initialise(partial)) {  // Call parent impl
+        return false;                          // If parent should request another loop, do so
+      }
+
+      // Fast init requested + supported?
+      if (partial && (this->fast_update_length_ > 0)) {
+        this->step_ = FSMState::INIT_STEP1_FASTINIT;
+        this->wait_for_idle_(true);  // Must wait for idle before fastinit sequence in next loop
+        return false;                // another loop: step #1 below
+      }
+
+      break;  // End state loop below
+
+    case FSMState::INIT_STEP1_FASTINIT:
+      // Step #1: Fast init sequence
+      ESP_LOGVV(TAG, "init #1");
+      this->write_fastinit_();
+      break;  // End state loop below
+
+    default:
+      // Unexpected step = bug?
+      this->mark_failed();
+  }
+
+  this->step_ = FSMState::NONE;
+  return true;  // Finished: State transition waits for idle
+}
+
+bool EPaperJD79660::transfer_buffer_chunks_() {
+  size_t buf_idx = 0;
+  uint8_t bytes_to_send[MAX_TRANSFER_SIZE];
+  const uint32_t start_time = App.get_loop_component_start_time();
+  const auto buffer_length = this->buffer_length_;
+  while (this->current_data_index_ != buffer_length) {
+    bytes_to_send[buf_idx++] = this->buffer_[this->current_data_index_++];
+
+    if (buf_idx == sizeof bytes_to_send) {
+      this->start_data_();
+      this->write_array(bytes_to_send, buf_idx);
+      this->disable();
+      ESP_LOGVV(TAG, "Wrote %zu bytes at %ums", buf_idx, (unsigned) millis());
+      buf_idx = 0;
+
+      if (millis() - start_time > MAX_TRANSFER_TIME) {
+        // Let the main loop run and come back next loop
+        return false;
+      }
+    }
+  }
+
+  // Finished the entire dataset
+  if (buf_idx != 0) {
+    this->start_data_();
+    this->write_array(bytes_to_send, buf_idx);
+    this->disable();
+    ESP_LOGVV(TAG, "Wrote %zu bytes at %ums", buf_idx, (unsigned) millis());
+  }
+  // Cleanup for next transfer
+  this->current_data_index_ = 0;
+
+  // Finished with all buffer chunks
+  return true;
+}
+
+void EPaperJD79660::write_fastinit_() {
+  // Undocumented register sequence in vendor register range.
+  // Related to Fast Init/Update.
+  // Should likely happen after regular init seq and power on, but before refresh.
+  // Might only work for some models with certain factory MTP.
+  // Please do not change without knowledge to avoid breakage.
+
+  this->send_init_sequence_(this->fast_update_, this->fast_update_length_);
+}
+
+bool EPaperJD79660::transfer_data() {
+  // For now always send full frame buffer in chunks.
+  // JD79660 might support partial window transfers. But sample code missing.
+  // And likely minimal impact, solely on SPI transfer time into RAM.
+
+  if (this->current_data_index_ == 0) {
+    this->command(CMD_TRANSFER);
+  }
+
+  return this->transfer_buffer_chunks_();
+}
+
+void EPaperJD79660::refresh_screen([[maybe_unused]] bool partial) {
+  ESP_LOGV(TAG, "Refresh");
+  this->cmd_data(CMD_REFRESH, {(uint8_t) 0x00});
+}
+
+void EPaperJD79660::power_off() {
+  ESP_LOGV(TAG, "Power off");
+  this->cmd_data(CMD_POWEROFF, {(uint8_t) 0x00});
+}
+
+void EPaperJD79660::deep_sleep() {
+  ESP_LOGV(TAG, "Deep sleep");
+  // "Deepsleep between update": Ensure EPD sleep to avoid early hardware wearout!
+  this->cmd_data(CMD_DEEPSLEEP, {(uint8_t) 0xA5});
+
+  // Notes:
+  // - VDD: Some boards (Waveshare) with "clever reset logic" would allow switching off
+  //   EPD VDD by pulling reset pin low for longer time.
+  //   However, a) not all boards have this, b) reliable sequence timing is difficult,
+  //   c) saving is not worth it after deepsleep command above.
+  //   If needed: Better option is to drive VDD via MOSFET with separate enable pin.
+  //
+  // - Possible safe shutdown:
+  //   EPaperBase::on_safe_shutdown() may also trigger deep_sleep() again.
+  //   Regularly, in IDLE state, this does not make sense for this "deepsleep between update" model,
+  //   but SPI sequence should simply be ignored by sleeping receiver.
+  //   But if triggering during lengthy update, this quick SPI sleep sequence may have benefit.
+  //   Optimally, EPDs should even be set all white for longer storage.
+  //   But full sequence (>15s) not possible w/o app logic.
+}
+
+}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/epaper_spi_jd79660.h

@@ -0,0 +1,145 @@
+#pragma once
+
+#include "epaper_spi.h"
+
+namespace esphome::epaper_spi {
+
+/**
+ * JD7966x IC driver implementation
+ *
+ * Currently tested with:
+ * - JD79660 (max res: 200x200)
+ *
+ * May also work for other JD7966x chipset family members with minimal adaptations.
+ *
+ * Capabilities:
+ * - HW frame buffer layout:
+ *   4 colors (gray0..3, commonly BWYR). Bytes consist of 4px/2bpp.
+ *   Width must be rounded to multiple of 4.
+ * - Fast init/update (shorter wave forms): Yes. Controlled by CONF_FULL_UPDATE_EVERY.
+ *   Needs undocumented fastinit sequence, based on likely vendor specific MTP content.
+ * - Partial transfer (transfer only changed window): No. Maybe possible by HW.
+ * - Partial refresh (refresh only changed window): No. Likely HW limit.
+ *
+ * @internal \c final saves few bytes by devirtualization. Remove \c final when subclassing.
+ */
+class EPaperJD79660 final : public EPaperBase {
+ public:
+  EPaperJD79660(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
+                size_t init_sequence_length, const uint8_t *fast_update, uint16_t fast_update_length)
+      : EPaperBase(name, width, height, init_sequence, init_sequence_length, DISPLAY_TYPE_COLOR),
+        fast_update_(fast_update),
+        fast_update_length_(fast_update_length) {
+    this->row_width_ = (width + 3) / 4;  // Fix base class calc (2bpp instead of 1bpp)
+    this->buffer_length_ = this->row_width_ * height;
+  }
+
+  void fill(Color color) override;
+
+ protected:
+  /** Draw colored pixel into frame buffer */
+  void draw_pixel_at(int x, int y, Color color) override;
+
+  /** Reset (multistep sequence)
+   * @pre this->reset_pin_ != nullptr // cv.Required check
+   * @post Should be idle on successful reset. Can mark failures.
+   */
+  bool reset() override;
+
+  /** Initialise (multistep sequence) */
+  bool initialise(bool partial) override;
+
+  /** Buffer transfer */
+  bool transfer_data() override;
+
+  /** Power on: Already part of init sequence (likely needed there before transferring buffers).
+   * So nothing to do in FSM state.
+   */
+  void power_on() override {}
+
+  /** Refresh screen
+   * @param partial Ignored: Needed earlier in \a ::initialize
+   * @pre Must be idle.
+   * @post Should return to idle later after processing.
+   */
+  void refresh_screen([[maybe_unused]] bool partial) override;
+
+  /** Power off
+   * @pre Must be idle.
+   * @post Should return to idle later after processing.
+   *       (latter will take long period like ~15-20s on actual refresh!)
+   */
+  void power_off() override;
+
+  /** Deepsleep: Must be used to avoid hardware wearout!
+   * @pre Must be idle.
+   * @post Will go busy, and not return idle till ::reset!
+   */
+  void deep_sleep() override;
+
+  /** Internal: Send fast init sequence via undocumented vendor registers
+   * @pre Must be directly after regular ::initialise sequence, before ::transfer_data
+   * @pre Must be idle.
+   * @post Should return to idle later after processing.
+   */
+  void write_fastinit_();
+
+  /** Internal: Send raw buffer in chunks
+   * \retval true Finished
+   * \retval false Loop time elapsed. Need to call again next loop.
+   */
+  bool transfer_buffer_chunks_();
+
+  /** @name IC commands @{ */
+  static constexpr uint8_t CMD_POWEROFF = 0x02;
+  static constexpr uint8_t CMD_DEEPSLEEP = 0x07;
+  static constexpr uint8_t CMD_TRANSFER = 0x10;
+  static constexpr uint8_t CMD_REFRESH = 0x12;
+  /** @} */
+
+  /** State machine constants for \a step_ */
+  enum class FSMState : uint8_t {
+    NONE = 0,  //!< Initial/default value: Unused
+
+    /* Reset state steps */
+    RESET_STEP0_H,
+    RESET_STEP1_L,
+    RESET_STEP2_IDLECHECK,
+
+    /* Init state steps */
+    INIT_STEP0_REGULARINIT,
+    INIT_STEP1_FASTINIT,
+  };
+
+  /** Wait time (millisec) for first reset phase: High
+   *
+   * Wait via FSM loop.
+   */
+  static constexpr uint16_t SLEEP_MS_RESET0 = 200;
+
+  /** Wait time (millisec) for second reset phase: Low
+   *
+   * Holding Reset Low too long may trigger "clever reset" logic
+   * of e.g. Waveshare Rev2 boards: VDD is shut down via MOSFET, and IC
+   * will not report idle anymore!
+   * FSM loop may spuriously increase delay, e.g. >16ms.
+   * Therefore, sync wait below, as allowed (code rule "delays > 10ms not permitted"),
+   * yet only slightly exceeding known IC min req of >1.5ms.
+   */
+  static constexpr uint16_t SLEEP_MS_RESET1 = 2;
+
+  /** Wait time (millisec) for third reset phase: High
+   *
+   * Wait via FSM loop.
+   */
+  static constexpr uint16_t SLEEP_MS_RESET2 = 200;
+
+  // properties initialised in the constructor
+  const uint8_t *const fast_update_{};
+  const uint16_t fast_update_length_{};
+
+  /** Counter for tracking substeps within FSM state */
+  FSMState step_{FSMState::NONE};
+};
+
+}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/models/jd79660.py

@@ -0,0 +1,86 @@
+import esphome.codegen as cg
+from esphome.components.mipi import flatten_sequence
+import esphome.config_validation as cv
+from esphome.const import CONF_BUSY_PIN, CONF_RESET_PIN
+from esphome.core import ID
+
+from ..display import CONF_INIT_SEQUENCE_ID
+from . import EpaperModel
+
+
+class JD79660(EpaperModel):
+    def __init__(self, name, class_name="EPaperJD79660", fast_update=None, **kwargs):
+        super().__init__(name, class_name, **kwargs)
+        self.fast_update = fast_update
+
+    def option(self, name, fallback=cv.UNDEFINED) -> cv.Optional | cv.Required:
+        # Validate required pins, as C++ code will assume existence
+        if name in (CONF_RESET_PIN, CONF_BUSY_PIN):
+            return cv.Required(name)
+
+        # Delegate to parent
+        return super().option(name, fallback)
+
+    def get_constructor_args(self, config) -> tuple:
+        # Resembles init_sequence handling for fast_update config
+        if self.fast_update is None:
+            fast_update = cg.nullptr, 0
+        else:
+            flat_fast_update = flatten_sequence(self.fast_update)
+            fast_update = (
+                cg.static_const_array(
+                    ID(
+                        config[CONF_INIT_SEQUENCE_ID].id + "_fast_update", type=cg.uint8
+                    ),
+                    flat_fast_update,
+                ),
+                len(flat_fast_update),
+            )
+        return (*fast_update,)
+
+
+jd79660 = JD79660(
+    "jd79660",
+    # Specified refresh times are ~20s (full) or ~15s (fast) due to BWRY.
+    # So disallow low update intervals (with safety margin), to avoid e.g. FSM update loops.
+    # Even less frequent intervals (min/h) highly recommended to optimize lifetime!
+    minimum_update_interval="30s",
+    # SPI rate: From spec comparisons, IC should allow SCL write cycles up to 10MHz rate.
+    # Existing code samples also prefer 10MHz. So justifies as default.
+    # Decrease value further in user config if needed (e.g. poor cabling).
+    data_rate="10MHz",
+    # No need to set optional reset_duration:
+    # Code requires multistep reset sequence with precise timings
+    # according to data sheet or samples.
+)
+
+# Waveshare 1.54-G
+#
+# Device may have specific factory provisioned MTP content to facilitate vendor register features like fast init.
+# Vendor specific init derived from vendor sample code
+# <https://github.com/waveshareteam/e-Paper/blob/master/E-paper_Separate_Program/1in54_e-Paper_G/ESP32/EPD_1in54g.cpp>
+# Compatible MIT license, see esphome/LICENSE file.
+#
+# fmt: off
+jd79660.extend(
+    "Waveshare-1.54in-G",
+    width=200,
+    height=200,
+
+    initsequence=(
+        (0x4D, 0x78,),
+        (0x00, 0x0F, 0x29,),
+        (0x06, 0x0d, 0x12, 0x30, 0x20, 0x19, 0x2a, 0x22,),
+        (0x50, 0x37,),
+        (0x61, 200 // 256, 200 % 256, 200 // 256, 200 % 256,),  # RES: 200x200 fixed
+        (0xE9, 0x01,),
+        (0x30, 0x08,),
+        # Power On (0x04): Must be early part of init seq = Disabled later!
+        (0x04,),
+    ),
+    fast_update=(
+        (0xE0, 0x02,),
+        (0xE6, 0x5D,),
+        (0xA5, 0x00,),
+    ),
+)

esphome/components/libretiny/__init__.py

@@ -193,14 +193,14 @@ def _notify_old_style(config):
 # The dev and latest branches will be at *least* this version, which is what matters.
 # Use GitHub releases directly to avoid PlatformIO moderation delays.
 ARDUINO_VERSIONS = {
-    "dev": (cv.Version(1, 11, 0), "https://github.com/libretiny-eu/libretiny.git"),
+    "dev": (cv.Version(1, 12, 1), "https://github.com/libretiny-eu/libretiny.git"),
     "latest": (
-        cv.Version(1, 11, 0),
-        "https://github.com/libretiny-eu/libretiny.git#v1.11.0",
+        cv.Version(1, 12, 1),
+        "https://github.com/libretiny-eu/libretiny.git#v1.12.1",
     ),
     "recommended": (
-        cv.Version(1, 11, 0),
-        "https://github.com/libretiny-eu/libretiny.git#v1.11.0",
+        cv.Version(1, 12, 1),
+        "https://github.com/libretiny-eu/libretiny.git#v1.12.1",
     ),
 }
 

esphome/components/ln882x/boards.py

@@ -154,28 +154,26 @@ LN882X_BOARD_PINS = {
         "A7": 21,
     },
     "wb02a": {
-        "WIRE0_SCL_0": 7,
-        "WIRE0_SCL_1": 5,
+        "WIRE0_SCL_0": 1,
+        "WIRE0_SCL_1": 2,
         "WIRE0_SCL_2": 3,
-        "WIRE0_SCL_3": 10,
-        "WIRE0_SCL_4": 2,
-        "WIRE0_SCL_5": 1,
-        "WIRE0_SCL_6": 4,
-        "WIRE0_SCL_7": 5,
-        "WIRE0_SCL_8": 9,
-        "WIRE0_SCL_9": 24,
-        "WIRE0_SCL_10": 25,
-        "WIRE0_SDA_0": 7,
-        "WIRE0_SDA_1": 5,
+        "WIRE0_SCL_3": 4,
+        "WIRE0_SCL_4": 5,
+        "WIRE0_SCL_5": 7,
+        "WIRE0_SCL_6": 9,
+        "WIRE0_SCL_7": 10,
+        "WIRE0_SCL_8": 24,
+        "WIRE0_SCL_9": 25,
+        "WIRE0_SDA_0": 1,
+        "WIRE0_SDA_1": 2,
         "WIRE0_SDA_2": 3,
-        "WIRE0_SDA_3": 10,
-        "WIRE0_SDA_4": 2,
-        "WIRE0_SDA_5": 1,
-        "WIRE0_SDA_6": 4,
-        "WIRE0_SDA_7": 5,
-        "WIRE0_SDA_8": 9,
-        "WIRE0_SDA_9": 24,
-        "WIRE0_SDA_10": 25,
+        "WIRE0_SDA_3": 4,
+        "WIRE0_SDA_4": 5,
+        "WIRE0_SDA_5": 7,
+        "WIRE0_SDA_6": 9,
+        "WIRE0_SDA_7": 10,
+        "WIRE0_SDA_8": 24,
+        "WIRE0_SDA_9": 25,
         "SERIAL0_RX": 3,
         "SERIAL0_TX": 2,
         "SERIAL1_RX": 24,
@@ -221,32 +219,32 @@ LN882X_BOARD_PINS = {
         "A1": 4,
     },
     "wl2s": {
-        "WIRE0_SCL_0": 7,
-        "WIRE0_SCL_1": 12,
-        "WIRE0_SCL_2": 3,
-        "WIRE0_SCL_3": 10,
-        "WIRE0_SCL_4": 2,
-        "WIRE0_SCL_5": 0,
-        "WIRE0_SCL_6": 19,
-        "WIRE0_SCL_7": 11,
-        "WIRE0_SCL_8": 9,
-        "WIRE0_SCL_9": 24,
-        "WIRE0_SCL_10": 25,
-        "WIRE0_SCL_11": 5,
-        "WIRE0_SCL_12": 1,
-        "WIRE0_SDA_0": 7,
-        "WIRE0_SDA_1": 12,
-        "WIRE0_SDA_2": 3,
-        "WIRE0_SDA_3": 10,
-        "WIRE0_SDA_4": 2,
-        "WIRE0_SDA_5": 0,
-        "WIRE0_SDA_6": 19,
-        "WIRE0_SDA_7": 11,
-        "WIRE0_SDA_8": 9,
-        "WIRE0_SDA_9": 24,
-        "WIRE0_SDA_10": 25,
-        "WIRE0_SDA_11": 5,
-        "WIRE0_SDA_12": 1,
+        "WIRE0_SCL_0": 0,
+        "WIRE0_SCL_1": 1,
+        "WIRE0_SCL_2": 2,
+        "WIRE0_SCL_3": 3,
+        "WIRE0_SCL_4": 5,
+        "WIRE0_SCL_5": 7,
+        "WIRE0_SCL_6": 9,
+        "WIRE0_SCL_7": 10,
+        "WIRE0_SCL_8": 11,
+        "WIRE0_SCL_9": 12,
+        "WIRE0_SCL_10": 19,
+        "WIRE0_SCL_11": 24,
+        "WIRE0_SCL_12": 25,
+        "WIRE0_SDA_0": 0,
+        "WIRE0_SDA_1": 1,
+        "WIRE0_SDA_2": 2,
+        "WIRE0_SDA_3": 3,
+        "WIRE0_SDA_4": 5,
+        "WIRE0_SDA_5": 7,
+        "WIRE0_SDA_6": 9,
+        "WIRE0_SDA_7": 10,
+        "WIRE0_SDA_8": 11,
+        "WIRE0_SDA_9": 12,
+        "WIRE0_SDA_10": 19,
+        "WIRE0_SDA_11": 24,
+        "WIRE0_SDA_12": 25,
         "SERIAL0_RX": 3,
         "SERIAL0_TX": 2,
         "SERIAL1_RX": 24,
@@ -301,24 +299,24 @@ LN882X_BOARD_PINS = {
         "A2": 1,
     },
     "ln-02": {
-        "WIRE0_SCL_0": 11,
-        "WIRE0_SCL_1": 19,
-        "WIRE0_SCL_2": 3,
-        "WIRE0_SCL_3": 24,
-        "WIRE0_SCL_4": 2,
-        "WIRE0_SCL_5": 25,
-        "WIRE0_SCL_6": 1,
-        "WIRE0_SCL_7": 0,
-        "WIRE0_SCL_8": 9,
-        "WIRE0_SDA_0": 11,
-        "WIRE0_SDA_1": 19,
-        "WIRE0_SDA_2": 3,
-        "WIRE0_SDA_3": 24,
-        "WIRE0_SDA_4": 2,
-        "WIRE0_SDA_5": 25,
-        "WIRE0_SDA_6": 1,
-        "WIRE0_SDA_7": 0,
-        "WIRE0_SDA_8": 9,
+        "WIRE0_SCL_0": 0,
+        "WIRE0_SCL_1": 1,
+        "WIRE0_SCL_2": 2,
+        "WIRE0_SCL_3": 3,
+        "WIRE0_SCL_4": 9,
+        "WIRE0_SCL_5": 11,
+        "WIRE0_SCL_6": 19,
+        "WIRE0_SCL_7": 24,
+        "WIRE0_SCL_8": 25,
+        "WIRE0_SDA_0": 0,
+        "WIRE0_SDA_1": 1,
+        "WIRE0_SDA_2": 2,
+        "WIRE0_SDA_3": 3,
+        "WIRE0_SDA_4": 9,
+        "WIRE0_SDA_5": 11,
+        "WIRE0_SDA_6": 19,
+        "WIRE0_SDA_7": 24,
+        "WIRE0_SDA_8": 25,
         "SERIAL0_RX": 3,
         "SERIAL0_TX": 2,
         "SERIAL1_RX": 24,

esphome/components/mqtt/mqtt_alarm_control_panel.cpp

@@ -13,31 +13,12 @@ static const char *const TAG = "mqtt.alarm_control_panel";
 
 using namespace esphome::alarm_control_panel;
 
+// Alarm state MQTT strings indexed by AlarmControlPanelState enum (0-9)
+PROGMEM_STRING_TABLE(AlarmMqttStateStrings, "disarmed", "armed_home", "armed_away", "armed_night", "armed_vacation",
+                     "armed_custom_bypass", "pending", "arming", "disarming", "triggered", "unknown");
+
 static ProgmemStr alarm_state_to_mqtt_str(AlarmControlPanelState state) {
-  switch (state) {
-    case ACP_STATE_DISARMED:
-      return ESPHOME_F("disarmed");
-    case ACP_STATE_ARMED_HOME:
-      return ESPHOME_F("armed_home");
-    case ACP_STATE_ARMED_AWAY:
-      return ESPHOME_F("armed_away");
-    case ACP_STATE_ARMED_NIGHT:
-      return ESPHOME_F("armed_night");
-    case ACP_STATE_ARMED_VACATION:
-      return ESPHOME_F("armed_vacation");
-    case ACP_STATE_ARMED_CUSTOM_BYPASS:
-      return ESPHOME_F("armed_custom_bypass");
-    case ACP_STATE_PENDING:
-      return ESPHOME_F("pending");
-    case ACP_STATE_ARMING:
-      return ESPHOME_F("arming");
-    case ACP_STATE_DISARMING:
-      return ESPHOME_F("disarming");
-    case ACP_STATE_TRIGGERED:
-      return ESPHOME_F("triggered");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return AlarmMqttStateStrings::get_progmem_str(static_cast<uint8_t>(state), AlarmMqttStateStrings::LAST_INDEX);
 }
 
 MQTTAlarmControlPanelComponent::MQTTAlarmControlPanelComponent(AlarmControlPanel *alarm_control_panel)

esphome/components/mqtt/mqtt_client.cpp

@@ -8,6 +8,7 @@
 #include "esphome/core/entity_base.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 #include "esphome/core/version.h"
 #ifdef USE_LOGGER
 #include "esphome/components/logger/logger.h"
@@ -27,6 +28,11 @@ namespace esphome::mqtt {
 
 static const char *const TAG = "mqtt";
 
+// Disconnect reason strings indexed by MQTTClientDisconnectReason enum (0-8)
+PROGMEM_STRING_TABLE(MQTTDisconnectReasonStrings, "TCP disconnected", "Unacceptable Protocol Version",
+                     "Identifier Rejected", "Server Unavailable", "Malformed Credentials", "Not Authorized",
+                     "Not Enough Space", "TLS Bad Fingerprint", "DNS Resolve Error", "Unknown");
+
 MQTTClientComponent::MQTTClientComponent() {
   global_mqtt_client = this;
   char mac_addr[MAC_ADDRESS_BUFFER_SIZE];
@@ -348,36 +354,8 @@ void MQTTClientComponent::loop() {
   mqtt_backend_.loop();
 
   if (this->disconnect_reason_.has_value()) {
-    const LogString *reason_s;
-    switch (*this->disconnect_reason_) {
-      case MQTTClientDisconnectReason::TCP_DISCONNECTED:
-        reason_s = LOG_STR("TCP disconnected");
-        break;
-      case MQTTClientDisconnectReason::MQTT_UNACCEPTABLE_PROTOCOL_VERSION:
-        reason_s = LOG_STR("Unacceptable Protocol Version");
-        break;
-      case MQTTClientDisconnectReason::MQTT_IDENTIFIER_REJECTED:
-        reason_s = LOG_STR("Identifier Rejected");
-        break;
-      case MQTTClientDisconnectReason::MQTT_SERVER_UNAVAILABLE:
-        reason_s = LOG_STR("Server Unavailable");
-        break;
-      case MQTTClientDisconnectReason::MQTT_MALFORMED_CREDENTIALS:
-        reason_s = LOG_STR("Malformed Credentials");
-        break;
-      case MQTTClientDisconnectReason::MQTT_NOT_AUTHORIZED:
-        reason_s = LOG_STR("Not Authorized");
-        break;
-      case MQTTClientDisconnectReason::ESP8266_NOT_ENOUGH_SPACE:
-        reason_s = LOG_STR("Not Enough Space");
-        break;
-      case MQTTClientDisconnectReason::TLS_BAD_FINGERPRINT:
-        reason_s = LOG_STR("TLS Bad Fingerprint");
-        break;
-      default:
-        reason_s = LOG_STR("Unknown");
-        break;
-    }
+    const LogString *reason_s = MQTTDisconnectReasonStrings::get_log_str(
+        static_cast<uint8_t>(*this->disconnect_reason_), MQTTDisconnectReasonStrings::LAST_INDEX);
     if (!network::is_connected()) {
       reason_s = LOG_STR("WiFi disconnected");
     }

esphome/components/mqtt/mqtt_climate.cpp

@@ -13,109 +13,44 @@ static const char *const TAG = "mqtt.climate";
 
 using namespace esphome::climate;
 
+// Climate mode MQTT strings indexed by ClimateMode enum (0-6): OFF, HEAT_COOL, COOL, HEAT, FAN_ONLY, DRY, AUTO
+PROGMEM_STRING_TABLE(ClimateMqttModeStrings, "off", "heat_cool", "cool", "heat", "fan_only", "dry", "auto", "unknown");
+
 static ProgmemStr climate_mode_to_mqtt_str(ClimateMode mode) {
-  switch (mode) {
-    case CLIMATE_MODE_OFF:
-      return ESPHOME_F("off");
-    case CLIMATE_MODE_HEAT_COOL:
-      return ESPHOME_F("heat_cool");
-    case CLIMATE_MODE_AUTO:
-      return ESPHOME_F("auto");
-    case CLIMATE_MODE_COOL:
-      return ESPHOME_F("cool");
-    case CLIMATE_MODE_HEAT:
-      return ESPHOME_F("heat");
-    case CLIMATE_MODE_FAN_ONLY:
-      return ESPHOME_F("fan_only");
-    case CLIMATE_MODE_DRY:
-      return ESPHOME_F("dry");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return ClimateMqttModeStrings::get_progmem_str(static_cast<uint8_t>(mode), ClimateMqttModeStrings::LAST_INDEX);
 }
 
+// Climate action MQTT strings indexed by ClimateAction enum (0,2-6): OFF, (gap), COOLING, HEATING, IDLE, DRYING, FAN
+PROGMEM_STRING_TABLE(ClimateMqttActionStrings, "off", "unknown", "cooling", "heating", "idle", "drying", "fan",
+                     "unknown");
+
 static ProgmemStr climate_action_to_mqtt_str(ClimateAction action) {
-  switch (action) {
-    case CLIMATE_ACTION_OFF:
-      return ESPHOME_F("off");
-    case CLIMATE_ACTION_COOLING:
-      return ESPHOME_F("cooling");
-    case CLIMATE_ACTION_HEATING:
-      return ESPHOME_F("heating");
-    case CLIMATE_ACTION_IDLE:
-      return ESPHOME_F("idle");
-    case CLIMATE_ACTION_DRYING:
-      return ESPHOME_F("drying");
-    case CLIMATE_ACTION_FAN:
-      return ESPHOME_F("fan");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return ClimateMqttActionStrings::get_progmem_str(static_cast<uint8_t>(action), ClimateMqttActionStrings::LAST_INDEX);
 }
 
+// Climate fan mode MQTT strings indexed by ClimateFanMode enum (0-9)
+PROGMEM_STRING_TABLE(ClimateMqttFanModeStrings, "on", "off", "auto", "low", "medium", "high", "middle", "focus",
+                     "diffuse", "quiet", "unknown");
+
 static ProgmemStr climate_fan_mode_to_mqtt_str(ClimateFanMode fan_mode) {
-  switch (fan_mode) {
-    case CLIMATE_FAN_ON:
-      return ESPHOME_F("on");
-    case CLIMATE_FAN_OFF:
-      return ESPHOME_F("off");
-    case CLIMATE_FAN_AUTO:
-      return ESPHOME_F("auto");
-    case CLIMATE_FAN_LOW:
-      return ESPHOME_F("low");
-    case CLIMATE_FAN_MEDIUM:
-      return ESPHOME_F("medium");
-    case CLIMATE_FAN_HIGH:
-      return ESPHOME_F("high");
-    case CLIMATE_FAN_MIDDLE:
-      return ESPHOME_F("middle");
-    case CLIMATE_FAN_FOCUS:
-      return ESPHOME_F("focus");
-    case CLIMATE_FAN_DIFFUSE:
-      return ESPHOME_F("diffuse");
-    case CLIMATE_FAN_QUIET:
-      return ESPHOME_F("quiet");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return ClimateMqttFanModeStrings::get_progmem_str(static_cast<uint8_t>(fan_mode),
+                                                    ClimateMqttFanModeStrings::LAST_INDEX);
 }
 
+// Climate swing mode MQTT strings indexed by ClimateSwingMode enum (0-3): OFF, BOTH, VERTICAL, HORIZONTAL
+PROGMEM_STRING_TABLE(ClimateMqttSwingModeStrings, "off", "both", "vertical", "horizontal", "unknown");
+
 static ProgmemStr climate_swing_mode_to_mqtt_str(ClimateSwingMode swing_mode) {
-  switch (swing_mode) {
-    case CLIMATE_SWING_OFF:
-      return ESPHOME_F("off");
-    case CLIMATE_SWING_BOTH:
-      return ESPHOME_F("both");
-    case CLIMATE_SWING_VERTICAL:
-      return ESPHOME_F("vertical");
-    case CLIMATE_SWING_HORIZONTAL:
-      return ESPHOME_F("horizontal");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return ClimateMqttSwingModeStrings::get_progmem_str(static_cast<uint8_t>(swing_mode),
+                                                      ClimateMqttSwingModeStrings::LAST_INDEX);
 }
 
+// Climate preset MQTT strings indexed by ClimatePreset enum (0-7)
+PROGMEM_STRING_TABLE(ClimateMqttPresetStrings, "none", "home", "away", "boost", "comfort", "eco", "sleep", "activity",
+                     "unknown");
+
 static ProgmemStr climate_preset_to_mqtt_str(ClimatePreset preset) {
-  switch (preset) {
-    case CLIMATE_PRESET_NONE:
-      return ESPHOME_F("none");
-    case CLIMATE_PRESET_HOME:
-      return ESPHOME_F("home");
-    case CLIMATE_PRESET_ECO:
-      return ESPHOME_F("eco");
-    case CLIMATE_PRESET_AWAY:
-      return ESPHOME_F("away");
-    case CLIMATE_PRESET_BOOST:
-      return ESPHOME_F("boost");
-    case CLIMATE_PRESET_COMFORT:
-      return ESPHOME_F("comfort");
-    case CLIMATE_PRESET_SLEEP:
-      return ESPHOME_F("sleep");
-    case CLIMATE_PRESET_ACTIVITY:
-      return ESPHOME_F("activity");
-    default:
-      return ESPHOME_F("unknown");
-  }
+  return ClimateMqttPresetStrings::get_progmem_str(static_cast<uint8_t>(preset), ClimateMqttPresetStrings::LAST_INDEX);
 }
 
 void MQTTClimateComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {

esphome/components/mqtt/mqtt_component.cpp

@@ -14,6 +14,9 @@ namespace esphome::mqtt {
 
 static const char *const TAG = "mqtt.component";
 
+// Entity category MQTT strings indexed by EntityCategory enum: NONE(0) is skipped, CONFIG(1), DIAGNOSTIC(2)
+PROGMEM_STRING_TABLE(EntityCategoryMqttStrings, "", "config", "diagnostic");
+
 // Helper functions for building topic strings on stack
 inline char *append_str(char *p, const char *s, size_t len) {
   memcpy(p, s, len);
@@ -213,13 +216,9 @@ bool MQTTComponent::send_discovery_() {
         // NOLINTEND(clang-analyzer-cplusplus.NewDeleteLeaks)
 
         const auto entity_category = this->get_entity()->get_entity_category();
-        switch (entity_category) {
-          case ENTITY_CATEGORY_NONE:
-            break;
-          case ENTITY_CATEGORY_CONFIG:
-          case ENTITY_CATEGORY_DIAGNOSTIC:
-            root[MQTT_ENTITY_CATEGORY] = entity_category == ENTITY_CATEGORY_CONFIG ? "config" : "diagnostic";
-            break;
+        if (entity_category != ENTITY_CATEGORY_NONE) {
+          root[MQTT_ENTITY_CATEGORY] = EntityCategoryMqttStrings::get_progmem_str(
+              static_cast<uint8_t>(entity_category), static_cast<uint8_t>(ENTITY_CATEGORY_CONFIG));
         }
 
         if (config.state_topic) {

esphome/components/mqtt/mqtt_number.cpp

@@ -1,5 +1,6 @@
 #include "mqtt_number.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 
 #include "mqtt_const.h"
 
@@ -12,6 +13,9 @@ static const char *const TAG = "mqtt.number";
 
 using namespace esphome::number;
 
+// Number mode MQTT strings indexed by NumberMode enum: AUTO(0) is skipped, BOX(1), SLIDER(2)
+PROGMEM_STRING_TABLE(NumberMqttModeStrings, "", "box", "slider");
+
 MQTTNumberComponent::MQTTNumberComponent(Number *number) : number_(number) {}
 
 void MQTTNumberComponent::setup() {
@@ -48,15 +52,10 @@ void MQTTNumberComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryCon
   if (!unit_of_measurement.empty()) {
     root[MQTT_UNIT_OF_MEASUREMENT] = unit_of_measurement;
   }
-  switch (this->number_->traits.get_mode()) {
-    case NUMBER_MODE_AUTO:
-      break;
-    case NUMBER_MODE_BOX:
-      root[MQTT_MODE] = "box";
-      break;
-    case NUMBER_MODE_SLIDER:
-      root[MQTT_MODE] = "slider";
-      break;
+  const auto mode = this->number_->traits.get_mode();
+  if (mode != NUMBER_MODE_AUTO) {
+    root[MQTT_MODE] =
+        NumberMqttModeStrings::get_progmem_str(static_cast<uint8_t>(mode), static_cast<uint8_t>(NUMBER_MODE_BOX));
   }
   const auto device_class = this->number_->traits.get_device_class_ref();
   if (!device_class.empty()) {

esphome/components/mqtt/mqtt_text.cpp

@@ -1,5 +1,6 @@
 #include "mqtt_text.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 
 #include "mqtt_const.h"
 
@@ -12,6 +13,9 @@ static const char *const TAG = "mqtt.text";
 
 using namespace esphome::text;
 
+// Text mode MQTT strings indexed by TextMode enum (0-1): TEXT, PASSWORD
+PROGMEM_STRING_TABLE(TextMqttModeStrings, "text", "password");
+
 MQTTTextComponent::MQTTTextComponent(Text *text) : text_(text) {}
 
 void MQTTTextComponent::setup() {
@@ -34,14 +38,8 @@ const EntityBase *MQTTTextComponent::get_entity() const { return this->text_; }
 
 void MQTTTextComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {
   // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks) false positive with ArduinoJson
-  switch (this->text_->traits.get_mode()) {
-    case TEXT_MODE_TEXT:
-      root[MQTT_MODE] = "text";
-      break;
-    case TEXT_MODE_PASSWORD:
-      root[MQTT_MODE] = "password";
-      break;
-  }
+  root[MQTT_MODE] = TextMqttModeStrings::get_progmem_str(static_cast<uint8_t>(this->text_->traits.get_mode()),
+                                                         static_cast<uint8_t>(TEXT_MODE_TEXT));
 
   config.command_topic = true;
 }

esphome/components/rtl87xx/boards.py

@@ -71,6 +71,10 @@ RTL87XX_BOARDS = {
         "name": "WR3L Wi-Fi Module",
         "family": FAMILY_RTL8710B,
     },
+    "wbru": {
+        "name": "WBRU Wi-Fi Module",
+        "family": FAMILY_RTL8720C,
+    },
     "wr2le": {
         "name": "WR2LE Wi-Fi Module",
         "family": FAMILY_RTL8710B,
@@ -83,6 +87,14 @@ RTL87XX_BOARDS = {
         "name": "T103_V1.0",
         "family": FAMILY_RTL8710B,
     },
+    "cr3l": {
+        "name": "CR3L Wi-Fi Module",
+        "family": FAMILY_RTL8720C,
+    },
+    "generic-rtl8720cm-4mb-1712k": {
+        "name": "Generic - RTL8720CM (4M/1712k)",
+        "family": FAMILY_RTL8720C,
+    },
     "generic-rtl8720cf-2mb-896k": {
         "name": "Generic - RTL8720CF (2M/896k)",
         "family": FAMILY_RTL8720C,
@@ -103,6 +115,10 @@ RTL87XX_BOARDS = {
         "name": "WR2L Wi-Fi Module",
         "family": FAMILY_RTL8710B,
     },
+    "wbr1": {
+        "name": "WBR1 Wi-Fi Module",
+        "family": FAMILY_RTL8720C,
+    },
     "wr1": {
         "name": "WR1 Wi-Fi Module",
         "family": FAMILY_RTL8710B,
@@ -119,10 +135,10 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
-        "WIRE0_SDA_0": 30,
-        "WIRE0_SDA_1": 19,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
+        "WIRE0_SDA_0": 19,
+        "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
         "WIRE1_SDA": 23,
         "SERIAL0_CTS": 19,
@@ -230,10 +246,10 @@ RTL87XX_BOARD_PINS = {
         "A1": 41,
     },
     "wbr3": {
-        "WIRE0_SCL_0": 11,
-        "WIRE0_SCL_1": 2,
-        "WIRE0_SCL_2": 19,
-        "WIRE0_SCL_3": 15,
+        "WIRE0_SCL_0": 2,
+        "WIRE0_SCL_1": 11,
+        "WIRE0_SCL_2": 15,
+        "WIRE0_SCL_3": 19,
         "WIRE0_SDA_0": 3,
         "WIRE0_SDA_1": 12,
         "WIRE0_SDA_2": 16,
@@ -242,10 +258,10 @@ RTL87XX_BOARD_PINS = {
         "SERIAL0_TX_0": 11,
         "SERIAL0_TX_1": 14,
         "SERIAL1_CTS": 4,
-        "SERIAL1_RX_0": 2,
-        "SERIAL1_RX_1": 0,
-        "SERIAL1_TX_0": 3,
-        "SERIAL1_TX_1": 1,
+        "SERIAL1_RX_0": 0,
+        "SERIAL1_RX_1": 2,
+        "SERIAL1_TX_0": 1,
+        "SERIAL1_TX_1": 3,
         "SERIAL2_CTS": 19,
         "SERIAL2_RX": 15,
         "SERIAL2_TX": 16,
@@ -296,6 +312,12 @@ RTL87XX_BOARD_PINS = {
     },
     "generic-rtl8710bn-2mb-468k": {
         "SPI0_CS": 19,
+        "SPI0_FCS": 6,
+        "SPI0_FD0": 9,
+        "SPI0_FD1": 7,
+        "SPI0_FD2": 8,
+        "SPI0_FD3": 11,
+        "SPI0_FSCK": 10,
         "SPI0_MISO": 22,
         "SPI0_MOSI": 23,
         "SPI0_SCK": 18,
@@ -396,10 +418,10 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
-        "WIRE0_SDA_0": 30,
-        "WIRE0_SDA_1": 19,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
+        "WIRE0_SDA_0": 19,
+        "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
         "WIRE1_SDA": 23,
         "SERIAL0_CTS": 19,
@@ -463,10 +485,10 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
-        "WIRE0_SDA_0": 30,
-        "WIRE0_SDA_1": 19,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
+        "WIRE0_SDA_0": 19,
+        "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
         "WIRE1_SDA": 23,
         "SERIAL0_CTS": 19,
@@ -714,6 +736,12 @@ RTL87XX_BOARD_PINS = {
     },
     "generic-rtl8710bn-2mb-788k": {
         "SPI0_CS": 19,
+        "SPI0_FCS": 6,
+        "SPI0_FD0": 9,
+        "SPI0_FD1": 7,
+        "SPI0_FD2": 8,
+        "SPI0_FD3": 11,
+        "SPI0_FSCK": 10,
         "SPI0_MISO": 22,
         "SPI0_MOSI": 23,
         "SPI0_SCK": 18,
@@ -807,6 +835,12 @@ RTL87XX_BOARD_PINS = {
     },
     "generic-rtl8710bx-4mb-980k": {
         "SPI0_CS": 19,
+        "SPI0_FCS": 6,
+        "SPI0_FD0": 9,
+        "SPI0_FD1": 7,
+        "SPI0_FD2": 8,
+        "SPI0_FD3": 11,
+        "SPI0_FSCK": 10,
         "SPI0_MISO": 22,
         "SPI0_MOSI": 23,
         "SPI0_SCK": 18,
@@ -957,8 +991,8 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
         "WIRE0_SDA_0": 19,
         "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
@@ -1088,6 +1122,99 @@ RTL87XX_BOARD_PINS = {
         "A0": 19,
         "A1": 41,
     },
+    "wbru": {
+        "SPI0_CS_0": 2,
+        "SPI0_CS_1": 7,
+        "SPI0_CS_2": 15,
+        "SPI0_MISO_0": 10,
+        "SPI0_MISO_1": 20,
+        "SPI0_MOSI_0": 4,
+        "SPI0_MOSI_1": 9,
+        "SPI0_MOSI_2": 19,
+        "SPI0_SCK_0": 3,
+        "SPI0_SCK_1": 8,
+        "SPI0_SCK_2": 16,
+        "WIRE0_SCL_0": 2,
+        "WIRE0_SCL_1": 11,
+        "WIRE0_SCL_2": 15,
+        "WIRE0_SCL_3": 19,
+        "WIRE0_SDA_0": 3,
+        "WIRE0_SDA_1": 12,
+        "WIRE0_SDA_2": 16,
+        "WIRE0_SDA_3": 20,
+        "SERIAL0_CTS": 10,
+        "SERIAL0_RTS": 9,
+        "SERIAL0_RX_0": 12,
+        "SERIAL0_RX_1": 13,
+        "SERIAL0_TX_0": 11,
+        "SERIAL0_TX_1": 14,
+        "SERIAL1_CTS": 4,
+        "SERIAL1_RX_0": 0,
+        "SERIAL1_RX_1": 2,
+        "SERIAL1_TX": 3,
+        "SERIAL2_CTS": 19,
+        "SERIAL2_RTS": 20,
+        "SERIAL2_RX": 15,
+        "SERIAL2_TX": 16,
+        "CS0": 7,
+        "CTS0": 10,
+        "CTS1": 4,
+        "CTS2": 19,
+        "MOSI0": 19,
+        "PA00": 0,
+        "PA0": 0,
+        "PA02": 2,
+        "PA2": 2,
+        "PA03": 3,
+        "PA3": 3,
+        "PA04": 4,
+        "PA4": 4,
+        "PA07": 7,
+        "PA7": 7,
+        "PA08": 8,
+        "PA8": 8,
+        "PA09": 9,
+        "PA9": 9,
+        "PA10": 10,
+        "PA11": 11,
+        "PA12": 12,
+        "PA13": 13,
+        "PA14": 14,
+        "PA15": 15,
+        "PA16": 16,
+        "PA17": 17,
+        "PA18": 18,
+        "PA19": 19,
+        "PA20": 20,
+        "PWM0": 0,
+        "PWM1": 12,
+        "PWM5": 17,
+        "PWM6": 18,
+        "RTS0": 9,
+        "RTS2": 20,
+        "RX2": 15,
+        "SCK0": 16,
+        "TX1": 3,
+        "TX2": 16,
+        "D0": 8,
+        "D1": 9,
+        "D2": 2,
+        "D3": 3,
+        "D4": 4,
+        "D5": 15,
+        "D6": 16,
+        "D7": 11,
+        "D8": 12,
+        "D9": 17,
+        "D10": 18,
+        "D11": 19,
+        "D12": 14,
+        "D13": 13,
+        "D14": 20,
+        "D15": 0,
+        "D16": 10,
+        "D17": 7,
+    },
     "wr2le": {
         "MISO0": 22,
         "MISO1": 22,
@@ -1116,21 +1243,21 @@ RTL87XX_BOARD_PINS = {
         "SPI0_MISO": 20,
         "SPI0_MOSI_0": 4,
         "SPI0_MOSI_1": 19,
-        "SPI0_SCK_0": 16,
-        "SPI0_SCK_1": 3,
+        "SPI0_SCK_0": 3,
+        "SPI0_SCK_1": 16,
         "WIRE0_SCL_0": 2,
         "WIRE0_SCL_1": 15,
         "WIRE0_SCL_2": 19,
-        "WIRE0_SDA_0": 20,
+        "WIRE0_SDA_0": 3,
         "WIRE0_SDA_1": 16,
-        "WIRE0_SDA_2": 3,
+        "WIRE0_SDA_2": 20,
         "SERIAL0_RX": 13,
         "SERIAL0_TX": 14,
         "SERIAL1_CTS": 4,
-        "SERIAL1_RX_0": 2,
-        "SERIAL1_RX_1": 0,
-        "SERIAL1_TX_0": 3,
-        "SERIAL1_TX_1": 1,
+        "SERIAL1_RX_0": 0,
+        "SERIAL1_RX_1": 2,
+        "SERIAL1_TX_0": 1,
+        "SERIAL1_TX_1": 3,
         "SERIAL2_CTS": 19,
         "SERIAL2_RTS": 20,
         "SERIAL2_RX": 15,
@@ -1251,6 +1378,168 @@ RTL87XX_BOARD_PINS = {
         "A0": 19,
         "A1": 41,
     },
+    "cr3l": {
+        "SPI0_CS_0": 2,
+        "SPI0_CS_1": 15,
+        "SPI0_MISO": 20,
+        "SPI0_MOSI_0": 4,
+        "SPI0_MOSI_1": 19,
+        "SPI0_SCK_0": 3,
+        "SPI0_SCK_1": 16,
+        "WIRE0_SCL_0": 2,
+        "WIRE0_SCL_1": 15,
+        "WIRE0_SCL_2": 19,
+        "WIRE0_SDA_0": 3,
+        "WIRE0_SDA_1": 16,
+        "WIRE0_SDA_2": 20,
+        "SERIAL0_RX": 13,
+        "SERIAL0_TX": 14,
+        "SERIAL1_CTS": 4,
+        "SERIAL1_RX": 2,
+        "SERIAL1_TX": 3,
+        "SERIAL2_CTS": 19,
+        "SERIAL2_RTS": 20,
+        "SERIAL2_RX": 15,
+        "SERIAL2_TX": 16,
+        "CTS1": 4,
+        "CTS2": 19,
+        "MISO0": 20,
+        "PA02": 2,
+        "PA2": 2,
+        "PA03": 3,
+        "PA3": 3,
+        "PA04": 4,
+        "PA4": 4,
+        "PA13": 13,
+        "PA14": 14,
+        "PA15": 15,
+        "PA16": 16,
+        "PA17": 17,
+        "PA18": 18,
+        "PA19": 19,
+        "PA20": 20,
+        "PWM0": 20,
+        "PWM5": 17,
+        "PWM6": 18,
+        "RTS2": 20,
+        "RX0": 13,
+        "RX1": 2,
+        "RX2": 15,
+        "SCL0": 19,
+        "SDA0": 16,
+        "TX0": 14,
+        "TX1": 3,
+        "TX2": 16,
+        "D0": 20,
+        "D1": 2,
+        "D2": 3,
+        "D3": 4,
+        "D4": 15,
+        "D5": 16,
+        "D6": 17,
+        "D7": 18,
+        "D8": 19,
+        "D9": 13,
+        "D10": 14,
+    },
+    "generic-rtl8720cm-4mb-1712k": {
+        "SPI0_CS_0": 2,
+        "SPI0_CS_1": 7,
+        "SPI0_CS_2": 15,
+        "SPI0_MISO_0": 10,
+        "SPI0_MISO_1": 20,
+        "SPI0_MOSI_0": 4,
+        "SPI0_MOSI_1": 9,
+        "SPI0_MOSI_2": 19,
+        "SPI0_SCK_0": 3,
+        "SPI0_SCK_1": 8,
+        "SPI0_SCK_2": 16,
+        "WIRE0_SCL_0": 2,
+        "WIRE0_SCL_1": 11,
+        "WIRE0_SCL_2": 15,
+        "WIRE0_SCL_3": 19,
+        "WIRE0_SDA_0": 3,
+        "WIRE0_SDA_1": 12,
+        "WIRE0_SDA_2": 16,
+        "WIRE0_SDA_3": 20,
+        "SERIAL0_CTS": 10,
+        "SERIAL0_RTS": 9,
+        "SERIAL0_RX_0": 12,
+        "SERIAL0_RX_1": 13,
+        "SERIAL0_TX_0": 11,
+        "SERIAL0_TX_1": 14,
+        "SERIAL1_CTS": 4,
+        "SERIAL1_RX_0": 0,
+        "SERIAL1_RX_1": 2,
+        "SERIAL1_TX_0": 1,
+        "SERIAL1_TX_1": 3,
+        "SERIAL2_CTS": 19,
+        "SERIAL2_RTS": 20,
+        "SERIAL2_RX": 15,
+        "SERIAL2_TX": 16,
+        "CS0": 15,
+        "CTS0": 10,
+        "CTS1": 4,
+        "CTS2": 19,
+        "MOSI0": 19,
+        "PA00": 0,
+        "PA0": 0,
+        "PA01": 1,
+        "PA1": 1,
+        "PA02": 2,
+        "PA2": 2,
+        "PA03": 3,
+        "PA3": 3,
+        "PA04": 4,
+        "PA4": 4,
+        "PA07": 7,
+        "PA7": 7,
+        "PA08": 8,
+        "PA8": 8,
+        "PA09": 9,
+        "PA9": 9,
+        "PA10": 10,
+        "PA11": 11,
+        "PA12": 12,
+        "PA13": 13,
+        "PA14": 14,
+        "PA15": 15,
+        "PA16": 16,
+        "PA17": 17,
+        "PA18": 18,
+        "PA19": 19,
+        "PA20": 20,
+        "PA23": 23,
+        "PWM0": 20,
+        "PWM5": 17,
+        "PWM6": 18,
+        "PWM7": 23,
+        "RTS0": 9,
+        "RTS2": 20,
+        "RX2": 15,
+        "SCK0": 16,
+        "TX2": 16,
+        "D0": 0,
+        "D1": 1,
+        "D2": 2,
+        "D3": 3,
+        "D4": 4,
+        "D5": 7,
+        "D6": 8,
+        "D7": 9,
+        "D8": 10,
+        "D9": 11,
+        "D10": 12,
+        "D11": 13,
+        "D12": 14,
+        "D13": 15,
+        "D14": 16,
+        "D15": 17,
+        "D16": 18,
+        "D17": 19,
+        "D18": 20,
+        "D19": 23,
+    },
     "generic-rtl8720cf-2mb-896k": {
         "SPI0_CS_0": 2,
         "SPI0_CS_1": 7,
@@ -1456,8 +1745,8 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
         "WIRE0_SDA_0": 19,
         "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
@@ -1585,6 +1874,65 @@ RTL87XX_BOARD_PINS = {
         "D4": 12,
         "A0": 19,
     },
+    "wbr1": {
+        "WIRE0_SCL_0": 2,
+        "WIRE0_SCL_1": 11,
+        "WIRE0_SCL_2": 15,
+        "WIRE0_SDA_0": 3,
+        "WIRE0_SDA_1": 12,
+        "WIRE0_SDA_2": 16,
+        "SERIAL0_RX_0": 12,
+        "SERIAL0_RX_1": 13,
+        "SERIAL0_TX_0": 11,
+        "SERIAL0_TX_1": 14,
+        "SERIAL1_CTS": 4,
+        "SERIAL1_RX_0": 0,
+        "SERIAL1_RX_1": 2,
+        "SERIAL1_TX_0": 1,
+        "SERIAL1_TX_1": 3,
+        "SERIAL2_RX": 15,
+        "SERIAL2_TX": 16,
+        "CTS1": 4,
+        "MOSI0": 4,
+        "PA00": 0,
+        "PA0": 0,
+        "PA01": 1,
+        "PA1": 1,
+        "PA02": 2,
+        "PA2": 2,
+        "PA03": 3,
+        "PA3": 3,
+        "PA04": 4,
+        "PA4": 4,
+        "PA11": 11,
+        "PA12": 12,
+        "PA13": 13,
+        "PA14": 14,
+        "PA15": 15,
+        "PA16": 16,
+        "PA17": 17,
+        "PA18": 18,
+        "PWM5": 17,
+        "PWM6": 18,
+        "PWM7": 13,
+        "RX2": 15,
+        "SCL0": 15,
+        "SDA0": 12,
+        "TX2": 16,
+        "D0": 14,
+        "D1": 13,
+        "D2": 2,
+        "D3": 3,
+        "D4": 16,
+        "D5": 4,
+        "D6": 11,
+        "D7": 15,
+        "D8": 12,
+        "D9": 17,
+        "D10": 18,
+        "D11": 0,
+        "D12": 1,
+    },
     "wr1": {
         "SPI0_CS": 19,
         "SPI0_MISO": 22,
@@ -1594,10 +1942,10 @@ RTL87XX_BOARD_PINS = {
         "SPI1_MISO": 22,
         "SPI1_MOSI": 23,
         "SPI1_SCK": 18,
-        "WIRE0_SCL_0": 29,
-        "WIRE0_SCL_1": 22,
-        "WIRE0_SDA_0": 30,
-        "WIRE0_SDA_1": 19,
+        "WIRE0_SCL_0": 22,
+        "WIRE0_SCL_1": 29,
+        "WIRE0_SDA_0": 19,
+        "WIRE0_SDA_1": 30,
         "WIRE1_SCL": 18,
         "WIRE1_SDA": 23,
         "SERIAL0_CTS": 19,

esphome/components/template/alarm_control_panel/template_alarm_control_panel.cpp

@@ -5,6 +5,7 @@
 #include "esphome/core/application.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 
 namespace esphome::template_ {
 
@@ -28,18 +29,11 @@ void TemplateAlarmControlPanel::add_sensor(binary_sensor::BinarySensor *sensor,
   this->sensor_data_.push_back(sd);
 };
 
+// Alarm sensor type strings indexed by AlarmSensorType enum (0-3): DELAYED, INSTANT, DELAYED_FOLLOWER, INSTANT_ALWAYS
+PROGMEM_STRING_TABLE(AlarmSensorTypeStrings, "delayed", "instant", "delayed_follower", "instant_always");
+
 static const LogString *sensor_type_to_string(AlarmSensorType type) {
-  switch (type) {
-    case ALARM_SENSOR_TYPE_INSTANT:
-      return LOG_STR("instant");
-    case ALARM_SENSOR_TYPE_DELAYED_FOLLOWER:
-      return LOG_STR("delayed_follower");
-    case ALARM_SENSOR_TYPE_INSTANT_ALWAYS:
-      return LOG_STR("instant_always");
-    case ALARM_SENSOR_TYPE_DELAYED:
-    default:
-      return LOG_STR("delayed");
-  }
+  return AlarmSensorTypeStrings::get_log_str(static_cast<uint8_t>(type), 0);
 }
 #endif
 

esphome/components/template/alarm_control_panel/template_alarm_control_panel.h

@@ -26,7 +26,7 @@ enum BinarySensorFlags : uint16_t {
   BINARY_SENSOR_MODE_BYPASS_AUTO = 1 << 4,
 };
 
-enum AlarmSensorType : uint16_t {
+enum AlarmSensorType : uint8_t {
   ALARM_SENSOR_TYPE_DELAYED = 0,
   ALARM_SENSOR_TYPE_INSTANT,
   ALARM_SENSOR_TYPE_DELAYED_FOLLOWER,

esphome/components/template/water_heater/__init__.py

@@ -46,6 +46,7 @@ CONFIG_SCHEMA = (
                 RESTORE_MODES, upper=True
             ),
             cv.Optional(CONF_CURRENT_TEMPERATURE): cv.returning_lambda,
+            cv.Optional(CONF_TARGET_TEMPERATURE): cv.returning_lambda,
             cv.Optional(CONF_MODE): cv.returning_lambda,
             cv.Optional(CONF_SUPPORTED_MODES): cv.ensure_list(
                 water_heater.validate_water_heater_mode
@@ -78,6 +79,14 @@ async def to_code(config: ConfigType) -> None:
         )
         cg.add(var.set_current_temperature_lambda(template_))
 
+    if CONF_TARGET_TEMPERATURE in config:
+        template_ = await cg.process_lambda(
+            config[CONF_TARGET_TEMPERATURE],
+            [],
+            return_type=cg.optional.template(cg.float_),
+        )
+        cg.add(var.set_target_temperature_lambda(template_))
+
     if CONF_MODE in config:
         template_ = await cg.process_lambda(
             config[CONF_MODE],

esphome/components/template/water_heater/template_water_heater.cpp

@@ -16,7 +16,8 @@ void TemplateWaterHeater::setup() {
       restore->perform();
     }
   }
-  if (!this->current_temperature_f_.has_value() && !this->mode_f_.has_value())
+  if (!this->current_temperature_f_.has_value() && !this->target_temperature_f_.has_value() &&
+      !this->mode_f_.has_value())
     this->disable_loop();
 }
 
@@ -28,6 +29,9 @@ water_heater::WaterHeaterTraits TemplateWaterHeater::traits() {
   }
 
   traits.set_supports_current_temperature(true);
+  if (this->target_temperature_f_.has_value()) {
+    traits.add_feature_flags(water_heater::WATER_HEATER_SUPPORTS_TARGET_TEMPERATURE);
+  }
   return traits;
 }
 
@@ -42,6 +46,14 @@ void TemplateWaterHeater::loop() {
     }
   }
 
+  auto target_temp = this->target_temperature_f_.call();
+  if (target_temp.has_value()) {
+    if (*target_temp != this->target_temperature_) {
+      this->target_temperature_ = *target_temp;
+      changed = true;
+    }
+  }
+
   auto new_mode = this->mode_f_.call();
   if (new_mode.has_value()) {
     if (*new_mode != this->mode_) {

esphome/components/template/water_heater/template_water_heater.h

@@ -20,6 +20,9 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
   template<typename F> void set_current_temperature_lambda(F &&f) {
     this->current_temperature_f_.set(std::forward<F>(f));
   }
+  template<typename F> void set_target_temperature_lambda(F &&f) {
+    this->target_temperature_f_.set(std::forward<F>(f));
+  }
   template<typename F> void set_mode_lambda(F &&f) { this->mode_f_.set(std::forward<F>(f)); }
 
   void set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
@@ -44,6 +47,7 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
   // Ordered to minimize padding on 32-bit: 4-byte members first, then smaller
   Trigger<> set_trigger_;
   TemplateLambda<float> current_temperature_f_;
+  TemplateLambda<float> target_temperature_f_;
   TemplateLambda<water_heater::WaterHeaterMode> mode_f_;
   TemplateWaterHeaterRestoreMode restore_mode_{WATER_HEATER_NO_RESTORE};
   water_heater::WaterHeaterModeMask supported_modes_;

esphome/dashboard/web_server.py

@@ -317,6 +317,7 @@ class EsphomeCommandWebSocket(CheckOriginMixin, tornado.websocket.WebSocketHandl
             # Check if the proc was not forcibly closed
             _LOGGER.info("Process exited with return code %s", returncode)
             self.write_message({"event": "exit", "code": returncode})
+            self.close()
 
     def on_close(self) -> None:
         # Check if proc exists (if 'start' has been run)

platformio.ini

@@ -37,7 +37,7 @@ lib_deps_base =
     wjtje/qr-code-generator-library@1.7.0  ; qr_code
     functionpointer/arduino-MLX90393@1.0.2 ; mlx90393
     pavlodn/HaierProtocol@0.9.31           ; haier
-    esphome/dsmr_parser@1.0.0              ; dsmr
+    esphome/dsmr_parser@1.1.0              ; dsmr
     polargoose/Crypto-no-arduino@0.4.0     ; dsmr
     https://github.com/esphome/TinyGPSPlus.git#v1.1.0     ; gps
 ; This is using the repository until a new release is published to PlatformIO
@@ -213,7 +213,7 @@ build_unflags =
 ; This are common settings for the LibreTiny (all variants) using Arduino.
 [common:libretiny-arduino]
 extends = common:arduino
-platform = https://github.com/libretiny-eu/libretiny.git#v1.11.0
+platform = https://github.com/libretiny-eu/libretiny.git#v1.12.1
 framework = arduino
 lib_compat_mode = soft
 lib_deps =

requirements.txt

@@ -23,6 +23,7 @@ resvg-py==0.2.6
 freetype-py==2.5.1
 jinja2==3.1.6
 bleak==2.1.1
+requests==2.32.5
 
 # esp-idf >= 5.0 requires this
 pyparsing >= 3.0

tests/components/epaper_spi/test.esp32-s3-idf.yaml

@@ -25,6 +25,22 @@ display:
     lambda: |-
       it.circle(64, 64, 50, Color::BLACK);
 
+  - platform: epaper_spi
+    spi_id: spi_bus
+    model: waveshare-1.54in-G
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO5
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO17
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO16
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO4
+
   - platform: epaper_spi
     spi_id: spi_bus
     model: waveshare-2.13in-v3

tests/components/template/common-base.yaml

@@ -412,6 +412,7 @@ water_heater:
     name: "Template Water Heater"
     optimistic: true
     current_temperature: !lambda "return 42.0f;"
+    target_temperature: !lambda "return 60.0f;"
     mode: !lambda "return water_heater::WATER_HEATER_MODE_ECO;"
     supported_modes:
       - "OFF"

tests/dashboard/test_web_server.py

@@ -29,7 +29,7 @@ from esphome.dashboard.entries import (
     bool_to_entry_state,
 )
 from esphome.dashboard.models import build_importable_device_dict
-from esphome.dashboard.web_server import DashboardSubscriber
+from esphome.dashboard.web_server import DashboardSubscriber, EsphomeCommandWebSocket
 from esphome.zeroconf import DiscoveredImport
 
 from .common import get_fixture_path
@@ -1654,3 +1654,25 @@ async def test_websocket_check_origin_multiple_trusted_domains(
             assert data["event"] == "initial_state"
         finally:
             ws.close()
+
+
+def test_proc_on_exit_calls_close() -> None:
+    """Test _proc_on_exit sends exit event and closes the WebSocket."""
+    handler = Mock(spec=EsphomeCommandWebSocket)
+    handler._is_closed = False
+
+    EsphomeCommandWebSocket._proc_on_exit(handler, 0)
+
+    handler.write_message.assert_called_once_with({"event": "exit", "code": 0})
+    handler.close.assert_called_once()
+
+
+def test_proc_on_exit_skips_when_already_closed() -> None:
+    """Test _proc_on_exit does nothing when WebSocket is already closed."""
+    handler = Mock(spec=EsphomeCommandWebSocket)
+    handler._is_closed = True
+
+    EsphomeCommandWebSocket._proc_on_exit(handler, 0)
+
+    handler.write_message.assert_not_called()
+    handler.close.assert_not_called()

tests/integration/fixtures/water_heater_template.yaml

@@ -10,6 +10,7 @@ water_heater:
     name: Test Boiler
     optimistic: true
     current_temperature: !lambda "return 45.0f;"
+    target_temperature: !lambda "return 60.0f;"
     # Note: No mode lambda - we want optimistic mode changes to stick
     # A mode lambda would override mode changes in loop()
     supported_modes:

tests/integration/test_water_heater_template.py

@@ -85,6 +85,9 @@ async def test_water_heater_template(
         assert initial_state.current_temperature == 45.0, (
             f"Expected current temp 45.0, got {initial_state.current_temperature}"
         )
+        assert initial_state.target_temperature == 60.0, (
+            f"Expected target temp 60.0, got {initial_state.target_temperature}"
+        )
 
         # Test changing to GAS mode
         client.water_heater_command(test_water_heater.key, mode=WaterHeaterMode.GAS)