Merge remote-tracking branch 'upstream/ci_impact_analysis' into 20251001-thermostat-humidity-support

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

.coveragerc

@@ -1,4 +1,5 @@
 [run]
 omit =
     esphome/components/*
+    esphome/analyze_memory/*
     tests/integration/*

.github/workflows/ci.yml

@@ -175,6 +175,7 @@ jobs:
       changed-components-with-tests: ${{ steps.determine.outputs.changed-components-with-tests }}
       directly-changed-components-with-tests: ${{ steps.determine.outputs.directly-changed-components-with-tests }}
       component-test-count: ${{ steps.determine.outputs.component-test-count }}
+      memory_impact: ${{ steps.determine.outputs.memory-impact }}
     steps:
       - name: Check out code from GitHub
         uses: actions/checkout@08c6903cd8c0fde910a37f88322edcfb5dd907a8 # v5.0.0
@@ -204,6 +205,7 @@ jobs:
           echo "changed-components-with-tests=$(echo "$output" | jq -c '.changed_components_with_tests')" >> $GITHUB_OUTPUT
           echo "directly-changed-components-with-tests=$(echo "$output" | jq -c '.directly_changed_components_with_tests')" >> $GITHUB_OUTPUT
           echo "component-test-count=$(echo "$output" | jq -r '.component_test_count')" >> $GITHUB_OUTPUT
+          echo "memory-impact=$(echo "$output" | jq -c '.memory_impact')" >> $GITHUB_OUTPUT
 
   integration-tests:
     name: Run integration tests
@@ -521,6 +523,292 @@ jobs:
       - uses: pre-commit-ci/lite-action@5d6cc0eb514c891a40562a58a8e71576c5c7fb43 # v1.1.0
         if: always()
 
+  memory-impact-target-branch:
+    name: Build target branch for memory impact
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - determine-jobs
+    if: github.event_name == 'pull_request' && fromJSON(needs.determine-jobs.outputs.memory_impact).should_run == 'true'
+    outputs:
+      ram_usage: ${{ steps.extract.outputs.ram_usage }}
+      flash_usage: ${{ steps.extract.outputs.flash_usage }}
+      cache_hit: ${{ steps.cache-memory-analysis.outputs.cache-hit }}
+      skip: ${{ steps.check-script.outputs.skip }}
+    steps:
+      - name: Check out target branch
+        uses: actions/checkout@08c6903cd8c0fde910a37f88322edcfb5dd907a8 # v5.0.0
+        with:
+          ref: ${{ github.base_ref }}
+
+      # Check if memory impact extraction script exists on target branch
+      # If not, skip the analysis (this handles older branches that don't have the feature)
+      - name: Check for memory impact script
+        id: check-script
+        run: |
+          if [ -f "script/ci_memory_impact_extract.py" ]; then
+            echo "skip=false" >> $GITHUB_OUTPUT
+          else
+            echo "skip=true" >> $GITHUB_OUTPUT
+            echo "::warning::ci_memory_impact_extract.py not found on target branch, skipping memory impact analysis"
+          fi
+
+      # All remaining steps only run if script exists
+      - name: Generate cache key
+        id: cache-key
+        if: steps.check-script.outputs.skip != 'true'
+        run: |
+          # Get the commit SHA of the target branch
+          target_sha=$(git rev-parse HEAD)
+
+          # Hash the build infrastructure files (all files that affect build/analysis)
+          infra_hash=$(cat \
+            script/test_build_components.py \
+            script/ci_memory_impact_extract.py \
+            script/analyze_component_buses.py \
+            script/merge_component_configs.py \
+            script/ci_helpers.py \
+            .github/workflows/ci.yml \
+            | sha256sum | cut -d' ' -f1)
+
+          # Get platform and components from job inputs
+          platform="${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}"
+          components='${{ toJSON(fromJSON(needs.determine-jobs.outputs.memory_impact).components) }}'
+          components_hash=$(echo "$components" | sha256sum | cut -d' ' -f1)
+
+          # Combine into cache key
+          cache_key="memory-analysis-target-${target_sha}-${infra_hash}-${platform}-${components_hash}"
+          echo "cache-key=${cache_key}" >> $GITHUB_OUTPUT
+          echo "Cache key: ${cache_key}"
+
+      - name: Restore cached memory analysis
+        id: cache-memory-analysis
+        if: steps.check-script.outputs.skip != 'true'
+        uses: actions/cache/restore@0057852bfaa89a56745cba8c7296529d2fc39830 # v4.3.0
+        with:
+          path: memory-analysis-target.json
+          key: ${{ steps.cache-key.outputs.cache-key }}
+
+      - name: Cache status
+        if: steps.check-script.outputs.skip != 'true'
+        run: |
+          if [ "${{ steps.cache-memory-analysis.outputs.cache-hit }}" == "true" ]; then
+            echo "✓ Cache hit! Using cached memory analysis results."
+            echo "  Skipping build step to save time."
+          else
+            echo "✗ Cache miss. Will build and analyze memory usage."
+          fi
+
+      - name: Restore Python
+        if: steps.check-script.outputs.skip != 'true' && steps.cache-memory-analysis.outputs.cache-hit != 'true'
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+
+      - name: Cache platformio
+        if: steps.check-script.outputs.skip != 'true' && steps.cache-memory-analysis.outputs.cache-hit != 'true'
+        uses: actions/cache/restore@0057852bfaa89a56745cba8c7296529d2fc39830 # v4.3.0
+        with:
+          path: ~/.platformio
+          key: platformio-memory-${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}-${{ hashFiles('platformio.ini') }}
+
+      - name: Build, compile, and analyze memory
+        if: steps.check-script.outputs.skip != 'true' && steps.cache-memory-analysis.outputs.cache-hit != 'true'
+        id: build
+        run: |
+          . venv/bin/activate
+          components='${{ toJSON(fromJSON(needs.determine-jobs.outputs.memory_impact).components) }}'
+          platform="${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}"
+
+          echo "Building with test_build_components.py for $platform with components:"
+          echo "$components" | jq -r '.[]' | sed 's/^/  - /'
+
+          # Use test_build_components.py which handles grouping automatically
+          # Pass components as comma-separated list
+          component_list=$(echo "$components" | jq -r 'join(",")')
+
+          echo "Compiling with test_build_components.py..."
+
+          # Run build and extract memory with auto-detection of build directory for detailed analysis
+          # Use tee to show output in CI while also piping to extraction script
+          python script/test_build_components.py \
+            -e compile \
+            -c "$component_list" \
+            -t "$platform" 2>&1 | \
+            tee /dev/stderr | \
+            python script/ci_memory_impact_extract.py \
+              --output-env \
+              --output-json memory-analysis-target.json
+
+      - name: Save memory analysis to cache
+        if: steps.check-script.outputs.skip != 'true' && steps.cache-memory-analysis.outputs.cache-hit != 'true' && steps.build.outcome == 'success'
+        uses: actions/cache/save@0057852bfaa89a56745cba8c7296529d2fc39830 # v4.3.0
+        with:
+          path: memory-analysis-target.json
+          key: ${{ steps.cache-key.outputs.cache-key }}
+
+      - name: Extract memory usage for outputs
+        id: extract
+        if: steps.check-script.outputs.skip != 'true'
+        run: |
+          if [ -f memory-analysis-target.json ]; then
+            ram=$(jq -r '.ram_bytes' memory-analysis-target.json)
+            flash=$(jq -r '.flash_bytes' memory-analysis-target.json)
+            echo "ram_usage=${ram}" >> $GITHUB_OUTPUT
+            echo "flash_usage=${flash}" >> $GITHUB_OUTPUT
+            echo "RAM: ${ram} bytes, Flash: ${flash} bytes"
+          else
+            echo "Error: memory-analysis-target.json not found"
+            exit 1
+          fi
+
+      - name: Upload memory analysis JSON
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
+        with:
+          name: memory-analysis-target
+          path: memory-analysis-target.json
+          if-no-files-found: warn
+          retention-days: 1
+
+  memory-impact-pr-branch:
+    name: Build PR branch for memory impact
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - determine-jobs
+    if: github.event_name == 'pull_request' && fromJSON(needs.determine-jobs.outputs.memory_impact).should_run == 'true'
+    outputs:
+      ram_usage: ${{ steps.extract.outputs.ram_usage }}
+      flash_usage: ${{ steps.extract.outputs.flash_usage }}
+    steps:
+      - name: Check out PR branch
+        uses: actions/checkout@08c6903cd8c0fde910a37f88322edcfb5dd907a8 # v5.0.0
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Cache platformio
+        uses: actions/cache/restore@0057852bfaa89a56745cba8c7296529d2fc39830 # v4.3.0
+        with:
+          path: ~/.platformio
+          key: platformio-memory-${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}-${{ hashFiles('platformio.ini') }}
+      - name: Build, compile, and analyze memory
+        id: extract
+        run: |
+          . venv/bin/activate
+          components='${{ toJSON(fromJSON(needs.determine-jobs.outputs.memory_impact).components) }}'
+          platform="${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}"
+
+          echo "Building with test_build_components.py for $platform with components:"
+          echo "$components" | jq -r '.[]' | sed 's/^/  - /'
+
+          # Use test_build_components.py which handles grouping automatically
+          # Pass components as comma-separated list
+          component_list=$(echo "$components" | jq -r 'join(",")')
+
+          echo "Compiling with test_build_components.py..."
+
+          # Run build and extract memory with auto-detection of build directory for detailed analysis
+          # Use tee to show output in CI while also piping to extraction script
+          python script/test_build_components.py \
+            -e compile \
+            -c "$component_list" \
+            -t "$platform" 2>&1 | \
+            tee /dev/stderr | \
+            python script/ci_memory_impact_extract.py \
+              --output-env \
+              --output-json memory-analysis-pr.json
+      - name: Upload memory analysis JSON
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
+        with:
+          name: memory-analysis-pr
+          path: memory-analysis-pr.json
+          if-no-files-found: warn
+          retention-days: 1
+
+  memory-impact-comment:
+    name: Comment memory impact
+    runs-on: ubuntu-24.04
+    needs:
+      - common
+      - determine-jobs
+      - memory-impact-target-branch
+      - memory-impact-pr-branch
+    if: github.event_name == 'pull_request' && fromJSON(needs.determine-jobs.outputs.memory_impact).should_run == 'true' && needs.memory-impact-target-branch.outputs.skip != 'true'
+    permissions:
+      contents: read
+      pull-requests: write
+    steps:
+      - name: Check out code
+        uses: actions/checkout@08c6903cd8c0fde910a37f88322edcfb5dd907a8 # v5.0.0
+      - name: Restore Python
+        uses: ./.github/actions/restore-python
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+          cache-key: ${{ needs.common.outputs.cache-key }}
+      - name: Download target analysis JSON
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v4.3.0
+        with:
+          name: memory-analysis-target
+          path: ./memory-analysis
+        continue-on-error: true
+      - name: Download PR analysis JSON
+        uses: actions/download-artifact@d3f86a106a0bac45b974a628896c90dbdf5c8093 # v4.3.0
+        with:
+          name: memory-analysis-pr
+          path: ./memory-analysis
+        continue-on-error: true
+      - name: Post or update PR comment
+        env:
+          GH_TOKEN: ${{ github.token }}
+          COMPONENTS: ${{ toJSON(fromJSON(needs.determine-jobs.outputs.memory_impact).components) }}
+          PLATFORM: ${{ fromJSON(needs.determine-jobs.outputs.memory_impact).platform }}
+          TARGET_RAM: ${{ needs.memory-impact-target-branch.outputs.ram_usage }}
+          TARGET_FLASH: ${{ needs.memory-impact-target-branch.outputs.flash_usage }}
+          PR_RAM: ${{ needs.memory-impact-pr-branch.outputs.ram_usage }}
+          PR_FLASH: ${{ needs.memory-impact-pr-branch.outputs.flash_usage }}
+          TARGET_CACHE_HIT: ${{ needs.memory-impact-target-branch.outputs.cache_hit }}
+        run: |
+          . venv/bin/activate
+
+          # Check if analysis JSON files exist
+          target_json_arg=""
+          pr_json_arg=""
+
+          if [ -f ./memory-analysis/memory-analysis-target.json ]; then
+            echo "Found target analysis JSON"
+            target_json_arg="--target-json ./memory-analysis/memory-analysis-target.json"
+          else
+            echo "No target analysis JSON found"
+          fi
+
+          if [ -f ./memory-analysis/memory-analysis-pr.json ]; then
+            echo "Found PR analysis JSON"
+            pr_json_arg="--pr-json ./memory-analysis/memory-analysis-pr.json"
+          else
+            echo "No PR analysis JSON found"
+          fi
+
+          # Add cache flag if target was cached
+          cache_flag=""
+          if [ "$TARGET_CACHE_HIT" == "true" ]; then
+            cache_flag="--target-cache-hit"
+          fi
+
+          python script/ci_memory_impact_comment.py \
+            --pr-number "${{ github.event.pull_request.number }}" \
+            --components "$COMPONENTS" \
+            --platform "$PLATFORM" \
+            --target-ram "$TARGET_RAM" \
+            --target-flash "$TARGET_FLASH" \
+            --pr-ram "$PR_RAM" \
+            --pr-flash "$PR_FLASH" \
+            $target_json_arg \
+            $pr_json_arg \
+            $cache_flag
+
   ci-status:
     name: CI Status
     runs-on: ubuntu-24.04
@@ -535,6 +823,9 @@ jobs:
       - test-build-components-splitter
       - test-build-components-split
       - pre-commit-ci-lite
+      - memory-impact-target-branch
+      - memory-impact-pr-branch
+      - memory-impact-comment
     if: always()
     steps:
       - name: Success

esphome/__main__.py

@@ -466,7 +466,9 @@ def write_cpp_file() -> int:
 def compile_program(args: ArgsProtocol, config: ConfigType) -> int:
     from esphome import platformio_api
 
-    _LOGGER.info("Compiling app...")
+    # NOTE: "Build path:" format is parsed by script/ci_memory_impact_extract.py
+    # If you change this format, update the regex in that script as well
+    _LOGGER.info("Compiling app... Build path: %s", CORE.build_path)
     rc = platformio_api.run_compile(config, CORE.verbose)
     if rc != 0:
         return rc

esphome/analyze_memory/__init__.py

@@ -0,0 +1,502 @@
+"""Memory usage analyzer for ESPHome compiled binaries."""
+
+from collections import defaultdict
+from dataclasses import dataclass, field
+import logging
+from pathlib import Path
+import re
+import subprocess
+from typing import TYPE_CHECKING
+
+from .const import (
+    CORE_SUBCATEGORY_PATTERNS,
+    DEMANGLED_PATTERNS,
+    ESPHOME_COMPONENT_PATTERN,
+    SECTION_TO_ATTR,
+    SYMBOL_PATTERNS,
+)
+from .helpers import (
+    get_component_class_patterns,
+    get_esphome_components,
+    map_section_name,
+    parse_symbol_line,
+)
+
+if TYPE_CHECKING:
+    from esphome.platformio_api import IDEData
+
+_LOGGER = logging.getLogger(__name__)
+
+# GCC global constructor/destructor prefix annotations
+_GCC_PREFIX_ANNOTATIONS = {
+    "_GLOBAL__sub_I_": "global constructor for",
+    "_GLOBAL__sub_D_": "global destructor for",
+}
+
+# GCC optimization suffix pattern (e.g., $isra$0, $part$1, $constprop$2)
+_GCC_OPTIMIZATION_SUFFIX_PATTERN = re.compile(r"(\$(?:isra|part|constprop)\$\d+)")
+
+# C++ runtime patterns for categorization
+_CPP_RUNTIME_PATTERNS = frozenset(["vtable", "typeinfo", "thunk"])
+
+# libc printf/scanf family base names (used to detect variants like _printf_r, vfprintf, etc.)
+_LIBC_PRINTF_SCANF_FAMILY = frozenset(["printf", "fprintf", "sprintf", "scanf"])
+
+# Regex pattern for parsing readelf section headers
+# Format: [ #] name type addr off size
+_READELF_SECTION_PATTERN = re.compile(
+    r"\s*\[\s*\d+\]\s+([\.\w]+)\s+\w+\s+[\da-fA-F]+\s+[\da-fA-F]+\s+([\da-fA-F]+)"
+)
+
+# Component category prefixes
+_COMPONENT_PREFIX_ESPHOME = "[esphome]"
+_COMPONENT_PREFIX_EXTERNAL = "[external]"
+_COMPONENT_CORE = f"{_COMPONENT_PREFIX_ESPHOME}core"
+_COMPONENT_API = f"{_COMPONENT_PREFIX_ESPHOME}api"
+
+# C++ namespace prefixes
+_NAMESPACE_ESPHOME = "esphome::"
+_NAMESPACE_STD = "std::"
+
+# Type alias for symbol information: (symbol_name, size, component)
+SymbolInfoType = tuple[str, int, str]
+
+
+@dataclass
+class MemorySection:
+    """Represents a memory section with its symbols."""
+
+    name: str
+    symbols: list[SymbolInfoType] = field(default_factory=list)
+    total_size: int = 0
+
+
+@dataclass
+class ComponentMemory:
+    """Tracks memory usage for a component."""
+
+    name: str
+    text_size: int = 0  # Code in flash
+    rodata_size: int = 0  # Read-only data in flash
+    data_size: int = 0  # Initialized data (flash + ram)
+    bss_size: int = 0  # Uninitialized data (ram only)
+    symbol_count: int = 0
+
+    @property
+    def flash_total(self) -> int:
+        """Total flash usage (text + rodata + data)."""
+        return self.text_size + self.rodata_size + self.data_size
+
+    @property
+    def ram_total(self) -> int:
+        """Total RAM usage (data + bss)."""
+        return self.data_size + self.bss_size
+
+
+class MemoryAnalyzer:
+    """Analyzes memory usage from ELF files."""
+
+    def __init__(
+        self,
+        elf_path: str,
+        objdump_path: str | None = None,
+        readelf_path: str | None = None,
+        external_components: set[str] | None = None,
+        idedata: "IDEData | None" = None,
+    ) -> None:
+        """Initialize memory analyzer.
+
+        Args:
+            elf_path: Path to ELF file to analyze
+            objdump_path: Path to objdump binary (auto-detected from idedata if not provided)
+            readelf_path: Path to readelf binary (auto-detected from idedata if not provided)
+            external_components: Set of external component names
+            idedata: Optional PlatformIO IDEData object to auto-detect toolchain paths
+        """
+        self.elf_path = Path(elf_path)
+        if not self.elf_path.exists():
+            raise FileNotFoundError(f"ELF file not found: {elf_path}")
+
+        # Auto-detect toolchain paths from idedata if not provided
+        if idedata is not None and (objdump_path is None or readelf_path is None):
+            objdump_path = objdump_path or idedata.objdump_path
+            readelf_path = readelf_path or idedata.readelf_path
+            _LOGGER.debug("Using toolchain paths from PlatformIO idedata")
+
+        self.objdump_path = objdump_path or "objdump"
+        self.readelf_path = readelf_path or "readelf"
+        self.external_components = external_components or set()
+
+        self.sections: dict[str, MemorySection] = {}
+        self.components: dict[str, ComponentMemory] = defaultdict(
+            lambda: ComponentMemory("")
+        )
+        self._demangle_cache: dict[str, str] = {}
+        self._uncategorized_symbols: list[tuple[str, str, int]] = []
+        self._esphome_core_symbols: list[
+            tuple[str, str, int]
+        ] = []  # Track core symbols
+        self._component_symbols: dict[str, list[tuple[str, str, int]]] = defaultdict(
+            list
+        )  # Track symbols for all components
+
+    def analyze(self) -> dict[str, ComponentMemory]:
+        """Analyze the ELF file and return component memory usage."""
+        self._parse_sections()
+        self._parse_symbols()
+        self._categorize_symbols()
+        return dict(self.components)
+
+    def _parse_sections(self) -> None:
+        """Parse section headers from ELF file."""
+        result = subprocess.run(
+            [self.readelf_path, "-S", str(self.elf_path)],
+            capture_output=True,
+            text=True,
+            check=True,
+        )
+
+        # Parse section headers
+        for line in result.stdout.splitlines():
+            # Look for section entries
+            if not (match := _READELF_SECTION_PATTERN.match(line)):
+                continue
+
+            section_name = match.group(1)
+            size_hex = match.group(2)
+            size = int(size_hex, 16)
+
+            # Map to standard section name
+            mapped_section = map_section_name(section_name)
+            if not mapped_section:
+                continue
+
+            if mapped_section not in self.sections:
+                self.sections[mapped_section] = MemorySection(mapped_section)
+            self.sections[mapped_section].total_size += size
+
+    def _parse_symbols(self) -> None:
+        """Parse symbols from ELF file."""
+        result = subprocess.run(
+            [self.objdump_path, "-t", str(self.elf_path)],
+            capture_output=True,
+            text=True,
+            check=True,
+        )
+
+        # Track seen addresses to avoid duplicates
+        seen_addresses: set[str] = set()
+
+        for line in result.stdout.splitlines():
+            if not (symbol_info := parse_symbol_line(line)):
+                continue
+
+            section, name, size, address = symbol_info
+
+            # Skip duplicate symbols at the same address (e.g., C1/C2 constructors)
+            if address in seen_addresses or section not in self.sections:
+                continue
+
+            self.sections[section].symbols.append((name, size, ""))
+            seen_addresses.add(address)
+
+    def _categorize_symbols(self) -> None:
+        """Categorize symbols by component."""
+        # First, collect all unique symbol names for batch demangling
+        all_symbols = {
+            symbol_name
+            for section in self.sections.values()
+            for symbol_name, _, _ in section.symbols
+        }
+
+        # Batch demangle all symbols at once
+        self._batch_demangle_symbols(list(all_symbols))
+
+        # Now categorize with cached demangled names
+        for section_name, section in self.sections.items():
+            for symbol_name, size, _ in section.symbols:
+                component = self._identify_component(symbol_name)
+
+                if component not in self.components:
+                    self.components[component] = ComponentMemory(component)
+
+                comp_mem = self.components[component]
+                comp_mem.symbol_count += 1
+
+                # Update the appropriate size attribute based on section
+                if attr_name := SECTION_TO_ATTR.get(section_name):
+                    setattr(comp_mem, attr_name, getattr(comp_mem, attr_name) + size)
+
+                # Track uncategorized symbols
+                if component == "other" and size > 0:
+                    demangled = self._demangle_symbol(symbol_name)
+                    self._uncategorized_symbols.append((symbol_name, demangled, size))
+
+                # Track ESPHome core symbols for detailed analysis
+                if component == _COMPONENT_CORE and size > 0:
+                    demangled = self._demangle_symbol(symbol_name)
+                    self._esphome_core_symbols.append((symbol_name, demangled, size))
+
+                # Track all component symbols for detailed analysis
+                if size > 0:
+                    demangled = self._demangle_symbol(symbol_name)
+                    self._component_symbols[component].append(
+                        (symbol_name, demangled, size)
+                    )
+
+    def _identify_component(self, symbol_name: str) -> str:
+        """Identify which component a symbol belongs to."""
+        # Demangle C++ names if needed
+        demangled = self._demangle_symbol(symbol_name)
+
+        # Check for special component classes first (before namespace pattern)
+        # This handles cases like esphome::ESPHomeOTAComponent which should map to ota
+        if _NAMESPACE_ESPHOME in demangled:
+            # Check for special component classes that include component name in the class
+            # For example: esphome::ESPHomeOTAComponent -> ota component
+            for component_name in get_esphome_components():
+                patterns = get_component_class_patterns(component_name)
+                if any(pattern in demangled for pattern in patterns):
+                    return f"{_COMPONENT_PREFIX_ESPHOME}{component_name}"
+
+        # Check for ESPHome component namespaces
+        match = ESPHOME_COMPONENT_PATTERN.search(demangled)
+        if match:
+            component_name = match.group(1)
+            # Strip trailing underscore if present (e.g., switch_ -> switch)
+            component_name = component_name.rstrip("_")
+
+            # Check if this is an actual component in the components directory
+            if component_name in get_esphome_components():
+                return f"{_COMPONENT_PREFIX_ESPHOME}{component_name}"
+            # Check if this is a known external component from the config
+            if component_name in self.external_components:
+                return f"{_COMPONENT_PREFIX_EXTERNAL}{component_name}"
+            # Everything else in esphome:: namespace is core
+            return _COMPONENT_CORE
+
+        # Check for esphome core namespace (no component namespace)
+        if _NAMESPACE_ESPHOME in demangled:
+            # If no component match found, it's core
+            return _COMPONENT_CORE
+
+        # Check against symbol patterns
+        for component, patterns in SYMBOL_PATTERNS.items():
+            if any(pattern in symbol_name for pattern in patterns):
+                return component
+
+        # Check against demangled patterns
+        for component, patterns in DEMANGLED_PATTERNS.items():
+            if any(pattern in demangled for pattern in patterns):
+                return component
+
+        # Special cases that need more complex logic
+
+        # Check if spi_flash vs spi_driver
+        if "spi_" in symbol_name or "SPI" in symbol_name:
+            return "spi_flash" if "spi_flash" in symbol_name else "spi_driver"
+
+        # libc special printf variants
+        if (
+            symbol_name.startswith("_")
+            and symbol_name[1:].replace("_r", "").replace("v", "").replace("s", "")
+            in _LIBC_PRINTF_SCANF_FAMILY
+        ):
+            return "libc"
+
+        # Track uncategorized symbols for analysis
+        return "other"
+
+    def _batch_demangle_symbols(self, symbols: list[str]) -> None:
+        """Batch demangle C++ symbol names for efficiency."""
+        if not symbols:
+            return
+
+        # Try to find the appropriate c++filt for the platform
+        cppfilt_cmd = "c++filt"
+
+        _LOGGER.info("Demangling %d symbols", len(symbols))
+        _LOGGER.debug("objdump_path = %s", self.objdump_path)
+
+        # Check if we have a toolchain-specific c++filt
+        if self.objdump_path and self.objdump_path != "objdump":
+            # Replace objdump with c++filt in the path
+            potential_cppfilt = self.objdump_path.replace("objdump", "c++filt")
+            _LOGGER.info("Checking for toolchain c++filt at: %s", potential_cppfilt)
+            if Path(potential_cppfilt).exists():
+                cppfilt_cmd = potential_cppfilt
+                _LOGGER.info("✓ Using toolchain c++filt: %s", cppfilt_cmd)
+            else:
+                _LOGGER.info(
+                    "✗ Toolchain c++filt not found at %s, using system c++filt",
+                    potential_cppfilt,
+                )
+        else:
+            _LOGGER.info("✗ Using system c++filt (objdump_path=%s)", self.objdump_path)
+
+        # Strip GCC optimization suffixes and prefixes before demangling
+        # Suffixes like $isra$0, $part$0, $constprop$0 confuse c++filt
+        # Prefixes like _GLOBAL__sub_I_ need to be removed and tracked
+        symbols_stripped: list[str] = []
+        symbols_prefixes: list[str] = []  # Track removed prefixes
+        for symbol in symbols:
+            # Remove GCC optimization markers
+            stripped = _GCC_OPTIMIZATION_SUFFIX_PATTERN.sub("", symbol)
+
+            # Handle GCC global constructor/initializer prefixes
+            # _GLOBAL__sub_I_<mangled> -> extract <mangled> for demangling
+            prefix = ""
+            for gcc_prefix in _GCC_PREFIX_ANNOTATIONS:
+                if stripped.startswith(gcc_prefix):
+                    prefix = gcc_prefix
+                    stripped = stripped[len(prefix) :]
+                    break
+
+            symbols_stripped.append(stripped)
+            symbols_prefixes.append(prefix)
+
+        try:
+            # Send all symbols to c++filt at once
+            result = subprocess.run(
+                [cppfilt_cmd],
+                input="\n".join(symbols_stripped),
+                capture_output=True,
+                text=True,
+                check=False,
+            )
+        except (subprocess.SubprocessError, OSError, UnicodeDecodeError) as e:
+            # On error, cache originals
+            _LOGGER.warning("Failed to batch demangle symbols: %s", e)
+            for symbol in symbols:
+                self._demangle_cache[symbol] = symbol
+            return
+
+        if result.returncode != 0:
+            _LOGGER.warning(
+                "c++filt exited with code %d: %s",
+                result.returncode,
+                result.stderr[:200] if result.stderr else "(no error output)",
+            )
+            # Cache originals on failure
+            for symbol in symbols:
+                self._demangle_cache[symbol] = symbol
+            return
+
+        # Process demangled output
+        self._process_demangled_output(
+            symbols, symbols_stripped, symbols_prefixes, result.stdout, cppfilt_cmd
+        )
+
+    def _process_demangled_output(
+        self,
+        symbols: list[str],
+        symbols_stripped: list[str],
+        symbols_prefixes: list[str],
+        demangled_output: str,
+        cppfilt_cmd: str,
+    ) -> None:
+        """Process demangled symbol output and populate cache.
+
+        Args:
+            symbols: Original symbol names
+            symbols_stripped: Stripped symbol names sent to c++filt
+            symbols_prefixes: Removed prefixes to restore
+            demangled_output: Output from c++filt
+            cppfilt_cmd: Path to c++filt command (for logging)
+        """
+        demangled_lines = demangled_output.strip().split("\n")
+        failed_count = 0
+
+        for original, stripped, prefix, demangled in zip(
+            symbols, symbols_stripped, symbols_prefixes, demangled_lines
+        ):
+            # Add back any prefix that was removed
+            demangled = self._restore_symbol_prefix(prefix, stripped, demangled)
+
+            # If we stripped a suffix, add it back to the demangled name for clarity
+            if original != stripped and not prefix:
+                demangled = self._restore_symbol_suffix(original, demangled)
+
+            self._demangle_cache[original] = demangled
+
+            # Log symbols that failed to demangle (stayed the same as stripped version)
+            if stripped == demangled and stripped.startswith("_Z"):
+                failed_count += 1
+                if failed_count <= 5:  # Only log first 5 failures
+                    _LOGGER.warning("Failed to demangle: %s", original)
+
+        if failed_count == 0:
+            _LOGGER.info("Successfully demangled all %d symbols", len(symbols))
+            return
+
+        _LOGGER.warning(
+            "Failed to demangle %d/%d symbols using %s",
+            failed_count,
+            len(symbols),
+            cppfilt_cmd,
+        )
+
+    @staticmethod
+    def _restore_symbol_prefix(prefix: str, stripped: str, demangled: str) -> str:
+        """Restore prefix that was removed before demangling.
+
+        Args:
+            prefix: Prefix that was removed (e.g., "_GLOBAL__sub_I_")
+            stripped: Stripped symbol name
+            demangled: Demangled symbol name
+
+        Returns:
+            Demangled name with prefix restored/annotated
+        """
+        if not prefix:
+            return demangled
+
+        # Successfully demangled - add descriptive prefix
+        if demangled != stripped and (
+            annotation := _GCC_PREFIX_ANNOTATIONS.get(prefix)
+        ):
+            return f"[{annotation}: {demangled}]"
+
+        # Failed to demangle - restore original prefix
+        return prefix + demangled
+
+    @staticmethod
+    def _restore_symbol_suffix(original: str, demangled: str) -> str:
+        """Restore GCC optimization suffix that was removed before demangling.
+
+        Args:
+            original: Original symbol name with suffix
+            demangled: Demangled symbol name without suffix
+
+        Returns:
+            Demangled name with suffix annotation
+        """
+        if suffix_match := _GCC_OPTIMIZATION_SUFFIX_PATTERN.search(original):
+            return f"{demangled} [{suffix_match.group(1)}]"
+        return demangled
+
+    def _demangle_symbol(self, symbol: str) -> str:
+        """Get demangled C++ symbol name from cache."""
+        return self._demangle_cache.get(symbol, symbol)
+
+    def _categorize_esphome_core_symbol(self, demangled: str) -> str:
+        """Categorize ESPHome core symbols into subcategories."""
+        # Special patterns that need to be checked separately
+        if any(pattern in demangled for pattern in _CPP_RUNTIME_PATTERNS):
+            return "C++ Runtime (vtables/RTTI)"
+
+        if demangled.startswith(_NAMESPACE_STD):
+            return "C++ STL"
+
+        # Check against patterns from const.py
+        for category, patterns in CORE_SUBCATEGORY_PATTERNS.items():
+            if any(pattern in demangled for pattern in patterns):
+                return category
+
+        return "Other Core"
+
+
+if __name__ == "__main__":
+    from .cli import main
+
+    main()

esphome/analyze_memory/__main__.py

@@ -0,0 +1,6 @@
+"""Main entry point for running the memory analyzer as a module."""
+
+from .cli import main
+
+if __name__ == "__main__":
+    main()

esphome/analyze_memory/cli.py

@@ -0,0 +1,408 @@
+"""CLI interface for memory analysis with report generation."""
+
+from collections import defaultdict
+import sys
+
+from . import (
+    _COMPONENT_API,
+    _COMPONENT_CORE,
+    _COMPONENT_PREFIX_ESPHOME,
+    _COMPONENT_PREFIX_EXTERNAL,
+    MemoryAnalyzer,
+)
+
+
+class MemoryAnalyzerCLI(MemoryAnalyzer):
+    """Memory analyzer with CLI-specific report generation."""
+
+    # Column width constants
+    COL_COMPONENT: int = 29
+    COL_FLASH_TEXT: int = 14
+    COL_FLASH_DATA: int = 14
+    COL_RAM_DATA: int = 12
+    COL_RAM_BSS: int = 12
+    COL_TOTAL_FLASH: int = 15
+    COL_TOTAL_RAM: int = 12
+    COL_SEPARATOR: int = 3  # " | "
+
+    # Core analysis column widths
+    COL_CORE_SUBCATEGORY: int = 30
+    COL_CORE_SIZE: int = 12
+    COL_CORE_COUNT: int = 6
+    COL_CORE_PERCENT: int = 10
+
+    # Calculate table width once at class level
+    TABLE_WIDTH: int = (
+        COL_COMPONENT
+        + COL_SEPARATOR
+        + COL_FLASH_TEXT
+        + COL_SEPARATOR
+        + COL_FLASH_DATA
+        + COL_SEPARATOR
+        + COL_RAM_DATA
+        + COL_SEPARATOR
+        + COL_RAM_BSS
+        + COL_SEPARATOR
+        + COL_TOTAL_FLASH
+        + COL_SEPARATOR
+        + COL_TOTAL_RAM
+    )
+
+    @staticmethod
+    def _make_separator_line(*widths: int) -> str:
+        """Create a separator line with given column widths.
+
+        Args:
+            widths: Column widths to create separators for
+
+        Returns:
+            Separator line like "----+---------+-----"
+        """
+        return "-+-".join("-" * width for width in widths)
+
+    # Pre-computed separator lines
+    MAIN_TABLE_SEPARATOR: str = _make_separator_line(
+        COL_COMPONENT,
+        COL_FLASH_TEXT,
+        COL_FLASH_DATA,
+        COL_RAM_DATA,
+        COL_RAM_BSS,
+        COL_TOTAL_FLASH,
+        COL_TOTAL_RAM,
+    )
+
+    CORE_TABLE_SEPARATOR: str = _make_separator_line(
+        COL_CORE_SUBCATEGORY,
+        COL_CORE_SIZE,
+        COL_CORE_COUNT,
+        COL_CORE_PERCENT,
+    )
+
+    def generate_report(self, detailed: bool = False) -> str:
+        """Generate a formatted memory report."""
+        components = sorted(
+            self.components.items(), key=lambda x: x[1].flash_total, reverse=True
+        )
+
+        # Calculate totals
+        total_flash = sum(c.flash_total for _, c in components)
+        total_ram = sum(c.ram_total for _, c in components)
+
+        # Build report
+        lines: list[str] = []
+
+        lines.append("=" * self.TABLE_WIDTH)
+        lines.append("Component Memory Analysis".center(self.TABLE_WIDTH))
+        lines.append("=" * self.TABLE_WIDTH)
+        lines.append("")
+
+        # Main table - fixed column widths
+        lines.append(
+            f"{'Component':<{self.COL_COMPONENT}} | {'Flash (text)':>{self.COL_FLASH_TEXT}} | {'Flash (data)':>{self.COL_FLASH_DATA}} | {'RAM (data)':>{self.COL_RAM_DATA}} | {'RAM (bss)':>{self.COL_RAM_BSS}} | {'Total Flash':>{self.COL_TOTAL_FLASH}} | {'Total RAM':>{self.COL_TOTAL_RAM}}"
+        )
+        lines.append(self.MAIN_TABLE_SEPARATOR)
+
+        for name, mem in components:
+            if mem.flash_total > 0 or mem.ram_total > 0:
+                flash_rodata = mem.rodata_size + mem.data_size
+                lines.append(
+                    f"{name:<{self.COL_COMPONENT}} | {mem.text_size:>{self.COL_FLASH_TEXT - 2},} B | {flash_rodata:>{self.COL_FLASH_DATA - 2},} B | "
+                    f"{mem.data_size:>{self.COL_RAM_DATA - 2},} B | {mem.bss_size:>{self.COL_RAM_BSS - 2},} B | "
+                    f"{mem.flash_total:>{self.COL_TOTAL_FLASH - 2},} B | {mem.ram_total:>{self.COL_TOTAL_RAM - 2},} B"
+                )
+
+        lines.append(self.MAIN_TABLE_SEPARATOR)
+        lines.append(
+            f"{'TOTAL':<{self.COL_COMPONENT}} | {' ':>{self.COL_FLASH_TEXT}} | {' ':>{self.COL_FLASH_DATA}} | "
+            f"{' ':>{self.COL_RAM_DATA}} | {' ':>{self.COL_RAM_BSS}} | "
+            f"{total_flash:>{self.COL_TOTAL_FLASH - 2},} B | {total_ram:>{self.COL_TOTAL_RAM - 2},} B"
+        )
+
+        # Top consumers
+        lines.append("")
+        lines.append("Top Flash Consumers:")
+        for i, (name, mem) in enumerate(components[:25]):
+            if mem.flash_total > 0:
+                percentage = (
+                    (mem.flash_total / total_flash * 100) if total_flash > 0 else 0
+                )
+                lines.append(
+                    f"{i + 1}. {name} ({mem.flash_total:,} B) - {percentage:.1f}% of analyzed flash"
+                )
+
+        lines.append("")
+        lines.append("Top RAM Consumers:")
+        ram_components = sorted(components, key=lambda x: x[1].ram_total, reverse=True)
+        for i, (name, mem) in enumerate(ram_components[:25]):
+            if mem.ram_total > 0:
+                percentage = (mem.ram_total / total_ram * 100) if total_ram > 0 else 0
+                lines.append(
+                    f"{i + 1}. {name} ({mem.ram_total:,} B) - {percentage:.1f}% of analyzed RAM"
+                )
+
+        lines.append("")
+        lines.append(
+            "Note: This analysis covers symbols in the ELF file. Some runtime allocations may not be included."
+        )
+        lines.append("=" * self.TABLE_WIDTH)
+
+        # Add ESPHome core detailed analysis if there are core symbols
+        if self._esphome_core_symbols:
+            lines.append("")
+            lines.append("=" * self.TABLE_WIDTH)
+            lines.append(
+                f"{_COMPONENT_CORE} Detailed Analysis".center(self.TABLE_WIDTH)
+            )
+            lines.append("=" * self.TABLE_WIDTH)
+            lines.append("")
+
+            # Group core symbols by subcategory
+            core_subcategories: dict[str, list[tuple[str, str, int]]] = defaultdict(
+                list
+            )
+
+            for symbol, demangled, size in self._esphome_core_symbols:
+                # Categorize based on demangled name patterns
+                subcategory = self._categorize_esphome_core_symbol(demangled)
+                core_subcategories[subcategory].append((symbol, demangled, size))
+
+            # Sort subcategories by total size
+            sorted_subcategories = sorted(
+                [
+                    (name, symbols, sum(s[2] for s in symbols))
+                    for name, symbols in core_subcategories.items()
+                ],
+                key=lambda x: x[2],
+                reverse=True,
+            )
+
+            lines.append(
+                f"{'Subcategory':<{self.COL_CORE_SUBCATEGORY}} | {'Size':>{self.COL_CORE_SIZE}} | "
+                f"{'Count':>{self.COL_CORE_COUNT}} | {'% of Core':>{self.COL_CORE_PERCENT}}"
+            )
+            lines.append(self.CORE_TABLE_SEPARATOR)
+
+            core_total = sum(size for _, _, size in self._esphome_core_symbols)
+
+            for subcategory, symbols, total_size in sorted_subcategories:
+                percentage = (total_size / core_total * 100) if core_total > 0 else 0
+                lines.append(
+                    f"{subcategory:<{self.COL_CORE_SUBCATEGORY}} | {total_size:>{self.COL_CORE_SIZE - 2},} B | "
+                    f"{len(symbols):>{self.COL_CORE_COUNT}} | {percentage:>{self.COL_CORE_PERCENT - 1}.1f}%"
+                )
+
+            # Top 15 largest core symbols
+            lines.append("")
+            lines.append(f"Top 15 Largest {_COMPONENT_CORE} Symbols:")
+            sorted_core_symbols = sorted(
+                self._esphome_core_symbols, key=lambda x: x[2], reverse=True
+            )
+
+            for i, (symbol, demangled, size) in enumerate(sorted_core_symbols[:15]):
+                lines.append(f"{i + 1}. {demangled} ({size:,} B)")
+
+            lines.append("=" * self.TABLE_WIDTH)
+
+        # Add detailed analysis for top ESPHome and external components
+        esphome_components = [
+            (name, mem)
+            for name, mem in components
+            if name.startswith(_COMPONENT_PREFIX_ESPHOME) and name != _COMPONENT_CORE
+        ]
+        external_components = [
+            (name, mem)
+            for name, mem in components
+            if name.startswith(_COMPONENT_PREFIX_EXTERNAL)
+        ]
+
+        top_esphome_components = sorted(
+            esphome_components, key=lambda x: x[1].flash_total, reverse=True
+        )[:30]
+
+        # Include all external components (they're usually important)
+        top_external_components = sorted(
+            external_components, key=lambda x: x[1].flash_total, reverse=True
+        )
+
+        # Check if API component exists and ensure it's included
+        api_component = None
+        for name, mem in components:
+            if name == _COMPONENT_API:
+                api_component = (name, mem)
+                break
+
+        # Combine all components to analyze: top ESPHome + all external + API if not already included
+        components_to_analyze = list(top_esphome_components) + list(
+            top_external_components
+        )
+        if api_component and api_component not in components_to_analyze:
+            components_to_analyze.append(api_component)
+
+        if components_to_analyze:
+            for comp_name, comp_mem in components_to_analyze:
+                if not (comp_symbols := self._component_symbols.get(comp_name, [])):
+                    continue
+                lines.append("")
+                lines.append("=" * self.TABLE_WIDTH)
+                lines.append(f"{comp_name} Detailed Analysis".center(self.TABLE_WIDTH))
+                lines.append("=" * self.TABLE_WIDTH)
+                lines.append("")
+
+                # Sort symbols by size
+                sorted_symbols = sorted(comp_symbols, key=lambda x: x[2], reverse=True)
+
+                lines.append(f"Total symbols: {len(sorted_symbols)}")
+                lines.append(f"Total size: {comp_mem.flash_total:,} B")
+                lines.append("")
+
+                # Show all symbols > 100 bytes for better visibility
+                large_symbols = [
+                    (sym, dem, size) for sym, dem, size in sorted_symbols if size > 100
+                ]
+
+                lines.append(
+                    f"{comp_name} Symbols > 100 B ({len(large_symbols)} symbols):"
+                )
+                for i, (symbol, demangled, size) in enumerate(large_symbols):
+                    lines.append(f"{i + 1}. {demangled} ({size:,} B)")
+
+                lines.append("=" * self.TABLE_WIDTH)
+
+        return "\n".join(lines)
+
+    def dump_uncategorized_symbols(self, output_file: str | None = None) -> None:
+        """Dump uncategorized symbols for analysis."""
+        # Sort by size descending
+        sorted_symbols = sorted(
+            self._uncategorized_symbols, key=lambda x: x[2], reverse=True
+        )
+
+        lines = ["Uncategorized Symbols Analysis", "=" * 80]
+        lines.append(f"Total uncategorized symbols: {len(sorted_symbols)}")
+        lines.append(
+            f"Total uncategorized size: {sum(s[2] for s in sorted_symbols):,} bytes"
+        )
+        lines.append("")
+        lines.append(f"{'Size':>10} | {'Symbol':<60} | Demangled")
+        lines.append("-" * 10 + "-+-" + "-" * 60 + "-+-" + "-" * 40)
+
+        for symbol, demangled, size in sorted_symbols[:100]:  # Top 100
+            demangled_display = (
+                demangled[:100] if symbol != demangled else "[not demangled]"
+            )
+            lines.append(f"{size:>10,} | {symbol[:60]:<60} | {demangled_display}")
+
+        if len(sorted_symbols) > 100:
+            lines.append(f"\n... and {len(sorted_symbols) - 100} more symbols")
+
+        content = "\n".join(lines)
+
+        if output_file:
+            with open(output_file, "w", encoding="utf-8") as f:
+                f.write(content)
+        else:
+            print(content)
+
+
+def analyze_elf(
+    elf_path: str,
+    objdump_path: str | None = None,
+    readelf_path: str | None = None,
+    detailed: bool = False,
+    external_components: set[str] | None = None,
+) -> str:
+    """Analyze an ELF file and return a memory report."""
+    analyzer = MemoryAnalyzerCLI(
+        elf_path, objdump_path, readelf_path, external_components
+    )
+    analyzer.analyze()
+    return analyzer.generate_report(detailed)
+
+
+def main():
+    """CLI entrypoint for memory analysis."""
+    if len(sys.argv) < 2:
+        print("Usage: python -m esphome.analyze_memory <build_directory>")
+        print("\nAnalyze memory usage from an ESPHome build directory.")
+        print("The build directory should contain firmware.elf and idedata will be")
+        print("loaded from ~/.esphome/.internal/idedata/<device>.json")
+        print("\nExamples:")
+        print("  python -m esphome.analyze_memory ~/.esphome/build/my-device")
+        print("  python -m esphome.analyze_memory .esphome/build/my-device")
+        print("  python -m esphome.analyze_memory my-device  # Short form")
+        sys.exit(1)
+
+    build_dir = sys.argv[1]
+
+    # Load build directory
+    import json
+    from pathlib import Path
+
+    from esphome.platformio_api import IDEData
+
+    build_path = Path(build_dir)
+
+    # If no path separator in name, assume it's a device name
+    if "/" not in build_dir and not build_path.is_dir():
+        # Try current directory first
+        cwd_path = Path.cwd() / ".esphome" / "build" / build_dir
+        if cwd_path.is_dir():
+            build_path = cwd_path
+            print(f"Using build directory: {build_path}", file=sys.stderr)
+        else:
+            # Fall back to home directory
+            build_path = Path.home() / ".esphome" / "build" / build_dir
+            print(f"Using build directory: {build_path}", file=sys.stderr)
+
+    if not build_path.is_dir():
+        print(f"Error: {build_path} is not a directory", file=sys.stderr)
+        sys.exit(1)
+
+    # Find firmware.elf
+    elf_file = None
+    for elf_candidate in [
+        build_path / "firmware.elf",
+        build_path / ".pioenvs" / build_path.name / "firmware.elf",
+    ]:
+        if elf_candidate.exists():
+            elf_file = str(elf_candidate)
+            break
+
+    if not elf_file:
+        print(f"Error: firmware.elf not found in {build_dir}", file=sys.stderr)
+        sys.exit(1)
+
+    # Find idedata.json - check current directory first, then home
+    device_name = build_path.name
+    idedata_candidates = [
+        Path.cwd() / ".esphome" / "idedata" / f"{device_name}.json",
+        Path.home() / ".esphome" / "idedata" / f"{device_name}.json",
+    ]
+
+    idedata = None
+    for idedata_path in idedata_candidates:
+        if not idedata_path.exists():
+            continue
+        try:
+            with open(idedata_path, encoding="utf-8") as f:
+                raw_data = json.load(f)
+            idedata = IDEData(raw_data)
+            print(f"Loaded idedata from: {idedata_path}", file=sys.stderr)
+            break
+        except (json.JSONDecodeError, OSError) as e:
+            print(f"Warning: Failed to load idedata: {e}", file=sys.stderr)
+
+    if not idedata:
+        print(
+            f"Warning: idedata not found (searched {idedata_candidates[0]} and {idedata_candidates[1]})",
+            file=sys.stderr,
+        )
+
+    analyzer = MemoryAnalyzerCLI(elf_file, idedata=idedata)
+    analyzer.analyze()
+    report = analyzer.generate_report()
+    print(report)
+
+
+if __name__ == "__main__":
+    main()

esphome/analyze_memory/const.py

@@ -0,0 +1,903 @@
+"""Constants for memory analysis symbol pattern matching."""
+
+import re
+
+# Pattern to extract ESPHome component namespaces dynamically
+ESPHOME_COMPONENT_PATTERN = re.compile(r"esphome::([a-zA-Z0-9_]+)::")
+
+# Section mapping for ELF file sections
+# Maps standard section names to their various platform-specific variants
+SECTION_MAPPING = {
+    ".text": frozenset([".text", ".iram"]),
+    ".rodata": frozenset([".rodata"]),
+    ".data": frozenset([".data", ".dram"]),
+    ".bss": frozenset([".bss"]),
+}
+
+# Section to ComponentMemory attribute mapping
+# Maps section names to the attribute name in ComponentMemory dataclass
+SECTION_TO_ATTR = {
+    ".text": "text_size",
+    ".rodata": "rodata_size",
+    ".data": "data_size",
+    ".bss": "bss_size",
+}
+
+# Component identification rules
+# Symbol patterns: patterns found in raw symbol names
+SYMBOL_PATTERNS = {
+    "freertos": [
+        "vTask",
+        "xTask",
+        "xQueue",
+        "pvPort",
+        "vPort",
+        "uxTask",
+        "pcTask",
+        "prvTimerTask",
+        "prvAddNewTaskToReadyList",
+        "pxReadyTasksLists",
+        "prvAddCurrentTaskToDelayedList",
+        "xEventGroupWaitBits",
+        "xRingbufferSendFromISR",
+        "prvSendItemDoneNoSplit",
+        "prvReceiveGeneric",
+        "prvSendAcquireGeneric",
+        "prvCopyItemAllowSplit",
+        "xEventGroup",
+        "xRingbuffer",
+        "prvSend",
+        "prvReceive",
+        "prvCopy",
+        "xPort",
+        "ulTaskGenericNotifyTake",
+        "prvIdleTask",
+        "prvInitialiseNewTask",
+        "prvIsYieldRequiredSMP",
+        "prvGetItemByteBuf",
+        "prvInitializeNewRingbuffer",
+        "prvAcquireItemNoSplit",
+        "prvNotifyQueueSetContainer",
+        "ucStaticTimerQueueStorage",
+        "eTaskGetState",
+        "main_task",
+        "do_system_init_fn",
+        "xSemaphoreCreateGenericWithCaps",
+        "vListInsert",
+        "uxListRemove",
+        "vRingbufferReturnItem",
+        "vRingbufferReturnItemFromISR",
+        "prvCheckItemFitsByteBuffer",
+        "prvGetCurMaxSizeAllowSplit",
+        "tick_hook",
+        "sys_sem_new",
+        "sys_arch_mbox_fetch",
+        "sys_arch_sem_wait",
+        "prvDeleteTCB",
+        "vQueueDeleteWithCaps",
+        "vRingbufferDeleteWithCaps",
+        "vSemaphoreDeleteWithCaps",
+        "prvCheckItemAvail",
+        "prvCheckTaskCanBeScheduledSMP",
+        "prvGetCurMaxSizeNoSplit",
+        "prvResetNextTaskUnblockTime",
+        "prvReturnItemByteBuf",
+        "vApplicationStackOverflowHook",
+        "vApplicationGetIdleTaskMemory",
+        "sys_init",
+        "sys_mbox_new",
+        "sys_arch_mbox_tryfetch",
+    ],
+    "xtensa": ["xt_", "_xt_", "xPortEnterCriticalTimeout"],
+    "heap": ["heap_", "multi_heap"],
+    "spi_flash": ["spi_flash"],
+    "rtc": ["rtc_", "rtcio_ll_"],
+    "gpio_driver": ["gpio_", "pins"],
+    "uart_driver": ["uart", "_uart", "UART"],
+    "timer": ["timer_", "esp_timer"],
+    "peripherals": ["periph_", "periman"],
+    "network_stack": [
+        "vj_compress",
+        "raw_sendto",
+        "raw_input",
+        "etharp_",
+        "icmp_input",
+        "socket_ipv6",
+        "ip_napt",
+        "socket_ipv4_multicast",
+        "socket_ipv6_multicast",
+        "netconn_",
+        "recv_raw",
+        "accept_function",
+        "netconn_recv_data",
+        "netconn_accept",
+        "netconn_write_vectors_partly",
+        "netconn_drain",
+        "raw_connect",
+        "raw_bind",
+        "icmp_send_response",
+        "sockets",
+        "icmp_dest_unreach",
+        "inet_chksum_pseudo",
+        "alloc_socket",
+        "done_socket",
+        "set_global_fd_sets",
+        "inet_chksum_pbuf",
+        "tryget_socket_unconn_locked",
+        "tryget_socket_unconn",
+        "cs_create_ctrl_sock",
+        "netbuf_alloc",
+    ],
+    "ipv6_stack": ["nd6_", "ip6_", "mld6_", "icmp6_", "icmp6_input"],
+    "wifi_stack": [
+        "ieee80211",
+        "hostap",
+        "sta_",
+        "ap_",
+        "scan_",
+        "wifi_",
+        "wpa_",
+        "wps_",
+        "esp_wifi",
+        "cnx_",
+        "wpa3_",
+        "sae_",
+        "wDev_",
+        "ic_",
+        "mac_",
+        "esf_buf",
+        "gWpaSm",
+        "sm_WPA",
+        "eapol_",
+        "owe_",
+        "wifiLowLevelInit",
+        "s_do_mapping",
+        "gScanStruct",
+        "ppSearchTxframe",
+        "ppMapWaitTxq",
+        "ppFillAMPDUBar",
+        "ppCheckTxConnTrafficIdle",
+        "ppCalTkipMic",
+    ],
+    "bluetooth": ["bt_", "ble_", "l2c_", "gatt_", "gap_", "hci_", "BT_init"],
+    "wifi_bt_coex": ["coex"],
+    "bluetooth_rom": ["r_ble", "r_lld", "r_llc", "r_llm"],
+    "bluedroid_bt": [
+        "bluedroid",
+        "btc_",
+        "bta_",
+        "btm_",
+        "btu_",
+        "BTM_",
+        "GATT",
+        "L2CA_",
+        "smp_",
+        "gatts_",
+        "attp_",
+        "l2cu_",
+        "l2cb",
+        "smp_cb",
+        "BTA_GATTC_",
+        "SMP_",
+        "BTU_",
+        "BTA_Dm",
+        "GAP_Ble",
+        "BT_tx_if",
+        "host_recv_pkt_cb",
+        "saved_local_oob_data",
+        "string_to_bdaddr",
+        "string_is_bdaddr",
+        "CalConnectParamTimeout",
+        "transmit_fragment",
+        "transmit_data",
+        "event_command_ready",
+        "read_command_complete_header",
+        "parse_read_local_extended_features_response",
+        "parse_read_local_version_info_response",
+        "should_request_high",
+        "btdm_wakeup_request",
+        "BTA_SetAttributeValue",
+        "BTA_EnableBluetooth",
+        "transmit_command_futured",
+        "transmit_command",
+        "get_waiting_command",
+        "make_command",
+        "transmit_downward",
+        "host_recv_adv_packet",
+        "copy_extra_byte_in_db",
+        "parse_read_local_supported_commands_response",
+    ],
+    "crypto_math": [
+        "ecp_",
+        "bignum_",
+        "mpi_",
+        "sswu",
+        "modp",
+        "dragonfly_",
+        "gcm_mult",
+        "__multiply",
+        "quorem",
+        "__mdiff",
+        "__lshift",
+        "__mprec_tens",
+        "ECC_",
+        "multiprecision_",
+        "mix_sub_columns",
+        "sbox",
+        "gfm2_sbox",
+        "gfm3_sbox",
+        "curve_p256",
+        "curve",
+        "p_256_init_curve",
+        "shift_sub_rows",
+        "rshift",
+    ],
+    "hw_crypto": ["esp_aes", "esp_sha", "esp_rsa", "esp_bignum", "esp_mpi"],
+    "libc": [
+        "printf",
+        "scanf",
+        "malloc",
+        "free",
+        "memcpy",
+        "memset",
+        "strcpy",
+        "strlen",
+        "_dtoa",
+        "_fopen",
+        "__sfvwrite_r",
+        "qsort",
+        "__sf",
+        "__sflush_r",
+        "__srefill_r",
+        "_impure_data",
+        "_reclaim_reent",
+        "_open_r",
+        "strncpy",
+        "_strtod_l",
+        "__gethex",
+        "__hexnan",
+        "_setenv_r",
+        "_tzset_unlocked_r",
+        "__tzcalc_limits",
+        "select",
+        "scalbnf",
+        "strtof",
+        "strtof_l",
+        "__d2b",
+        "__b2d",
+        "__s2b",
+        "_Balloc",
+        "__multadd",
+        "__lo0bits",
+        "__atexit0",
+        "__smakebuf_r",
+        "__swhatbuf_r",
+        "_sungetc_r",
+        "_close_r",
+        "_link_r",
+        "_unsetenv_r",
+        "_rename_r",
+        "__month_lengths",
+        "tzinfo",
+        "__ratio",
+        "__hi0bits",
+        "__ulp",
+        "__any_on",
+        "__copybits",
+        "L_shift",
+        "_fcntl_r",
+        "_lseek_r",
+        "_read_r",
+        "_write_r",
+        "_unlink_r",
+        "_fstat_r",
+        "access",
+        "fsync",
+        "tcsetattr",
+        "tcgetattr",
+        "tcflush",
+        "tcdrain",
+        "__ssrefill_r",
+        "_stat_r",
+        "__hexdig_fun",
+        "__mcmp",
+        "_fwalk_sglue",
+        "__fpclassifyf",
+        "_setlocale_r",
+        "_mbrtowc_r",
+        "fcntl",
+        "__match",
+        "_lock_close",
+        "__c$",
+        "__func__$",
+        "__FUNCTION__$",
+        "DAYS_IN_MONTH",
+        "_DAYS_BEFORE_MONTH",
+        "CSWTCH$",
+        "dst$",
+        "sulp",
+    ],
+    "string_ops": ["strcmp", "strncmp", "strchr", "strstr", "strtok", "strdup"],
+    "memory_alloc": ["malloc", "calloc", "realloc", "free", "_sbrk"],
+    "file_io": [
+        "fread",
+        "fwrite",
+        "fopen",
+        "fclose",
+        "fseek",
+        "ftell",
+        "fflush",
+        "s_fd_table",
+    ],
+    "string_formatting": [
+        "snprintf",
+        "vsnprintf",
+        "sprintf",
+        "vsprintf",
+        "sscanf",
+        "vsscanf",
+    ],
+    "cpp_anonymous": ["_GLOBAL__N_", "n$"],
+    "cpp_runtime": ["__cxx", "_ZN", "_ZL", "_ZSt", "__gxx_personality", "_Z16"],
+    "exception_handling": ["__cxa_", "_Unwind_", "__gcc_personality", "uw_frame_state"],
+    "static_init": ["_GLOBAL__sub_I_"],
+    "mdns_lib": ["mdns"],
+    "phy_radio": [
+        "phy_",
+        "rf_",
+        "chip_",
+        "register_chipv7",
+        "pbus_",
+        "bb_",
+        "fe_",
+        "rfcal_",
+        "ram_rfcal",
+        "tx_pwctrl",
+        "rx_chan",
+        "set_rx_gain",
+        "set_chan",
+        "agc_reg",
+        "ram_txiq",
+        "ram_txdc",
+        "ram_gen_rx_gain",
+        "rx_11b_opt",
+        "set_rx_sense",
+        "set_rx_gain_cal",
+        "set_chan_dig_gain",
+        "tx_pwctrl_init_cal",
+        "rfcal_txiq",
+        "set_tx_gain_table",
+        "correct_rfpll_offset",
+        "pll_correct_dcap",
+        "txiq_cal_init",
+        "pwdet_sar",
+        "pwdet_sar2_init",
+        "ram_iq_est_enable",
+        "ram_rfpll_set_freq",
+        "ant_wifirx_cfg",
+        "ant_btrx_cfg",
+        "force_txrxoff",
+        "force_txrx_off",
+        "tx_paon_set",
+        "opt_11b_resart",
+        "rfpll_1p2_opt",
+        "ram_dc_iq_est",
+        "ram_start_tx_tone",
+        "ram_en_pwdet",
+        "ram_cbw2040_cfg",
+        "rxdc_est_min",
+        "i2cmst_reg_init",
+        "temprature_sens_read",
+        "ram_restart_cal",
+        "ram_write_gain_mem",
+        "ram_wait_rfpll_cal_end",
+        "txcal_debuge_mode",
+        "ant_wifitx_cfg",
+        "reg_init_begin",
+    ],
+    "wifi_phy_pp": ["pp_", "ppT", "ppR", "ppP", "ppInstall", "ppCalTxAMPDULength"],
+    "wifi_lmac": ["lmac"],
+    "wifi_device": ["wdev", "wDev_"],
+    "power_mgmt": [
+        "pm_",
+        "sleep",
+        "rtc_sleep",
+        "light_sleep",
+        "deep_sleep",
+        "power_down",
+        "g_pm",
+    ],
+    "memory_mgmt": [
+        "mem_",
+        "memory_",
+        "tlsf_",
+        "memp_",
+        "pbuf_",
+        "pbuf_alloc",
+        "pbuf_copy_partial_pbuf",
+    ],
+    "hal_layer": ["hal_"],
+    "clock_mgmt": [
+        "clk_",
+        "clock_",
+        "rtc_clk",
+        "apb_",
+        "cpu_freq",
+        "setCpuFrequencyMhz",
+    ],
+    "cache_mgmt": ["cache"],
+    "flash_ops": ["flash", "image_load"],
+    "interrupt_handlers": [
+        "isr",
+        "interrupt",
+        "intr_",
+        "exc_",
+        "exception",
+        "port_IntStack",
+    ],
+    "wrapper_functions": ["_wrapper"],
+    "error_handling": ["panic", "abort", "assert", "error_", "fault"],
+    "authentication": ["auth"],
+    "ppp_protocol": ["ppp", "ipcp_", "lcp_", "chap_", "LcpEchoCheck"],
+    "dhcp": ["dhcp", "handle_dhcp"],
+    "ethernet_phy": [
+        "emac_",
+        "eth_phy_",
+        "phy_tlk110",
+        "phy_lan87",
+        "phy_ip101",
+        "phy_rtl",
+        "phy_dp83",
+        "phy_ksz",
+        "lan87xx_",
+        "rtl8201_",
+        "ip101_",
+        "ksz80xx_",
+        "jl1101_",
+        "dp83848_",
+        "eth_on_state_changed",
+    ],
+    "threading": ["pthread_", "thread_", "_task_"],
+    "pthread": ["pthread"],
+    "synchronization": ["mutex", "semaphore", "spinlock", "portMUX"],
+    "math_lib": [
+        "sin",
+        "cos",
+        "tan",
+        "sqrt",
+        "pow",
+        "exp",
+        "log",
+        "atan",
+        "asin",
+        "acos",
+        "floor",
+        "ceil",
+        "fabs",
+        "round",
+    ],
+    "random": ["rand", "random", "rng_", "prng"],
+    "time_lib": [
+        "time",
+        "clock",
+        "gettimeofday",
+        "settimeofday",
+        "localtime",
+        "gmtime",
+        "mktime",
+        "strftime",
+    ],
+    "console_io": ["console_", "uart_tx", "uart_rx", "puts", "putchar", "getchar"],
+    "rom_functions": ["r_", "rom_"],
+    "compiler_runtime": [
+        "__divdi3",
+        "__udivdi3",
+        "__moddi3",
+        "__muldi3",
+        "__ashldi3",
+        "__ashrdi3",
+        "__lshrdi3",
+        "__cmpdi2",
+        "__fixdfdi",
+        "__floatdidf",
+    ],
+    "libgcc": ["libgcc", "_divdi3", "_udivdi3"],
+    "boot_startup": ["boot", "start_cpu", "call_start", "startup", "bootloader"],
+    "bootloader": ["bootloader_", "esp_bootloader"],
+    "app_framework": ["app_", "initArduino", "setup", "loop", "Update"],
+    "weak_symbols": ["__weak_"],
+    "compiler_builtins": ["__builtin_"],
+    "vfs": ["vfs_", "VFS"],
+    "esp32_sdk": ["esp32_", "esp32c", "esp32s"],
+    "usb": ["usb_", "USB", "cdc_", "CDC"],
+    "i2c_driver": ["i2c_", "I2C"],
+    "i2s_driver": ["i2s_", "I2S"],
+    "spi_driver": ["spi_", "SPI"],
+    "adc_driver": ["adc_", "ADC"],
+    "dac_driver": ["dac_", "DAC"],
+    "touch_driver": ["touch_", "TOUCH"],
+    "pwm_driver": ["pwm_", "PWM", "ledc_", "LEDC"],
+    "rmt_driver": ["rmt_", "RMT"],
+    "pcnt_driver": ["pcnt_", "PCNT"],
+    "can_driver": ["can_", "CAN", "twai_", "TWAI"],
+    "sdmmc_driver": ["sdmmc_", "SDMMC", "sdcard", "sd_card"],
+    "temp_sensor": ["temp_sensor", "tsens_"],
+    "watchdog": ["wdt_", "WDT", "watchdog"],
+    "brownout": ["brownout", "bod_"],
+    "ulp": ["ulp_", "ULP"],
+    "psram": ["psram", "PSRAM", "spiram", "SPIRAM"],
+    "efuse": ["efuse", "EFUSE"],
+    "partition": ["partition", "esp_partition"],
+    "esp_event": ["esp_event", "event_loop", "event_callback"],
+    "esp_console": ["esp_console", "console_"],
+    "chip_specific": ["chip_", "esp_chip"],
+    "esp_system_utils": ["esp_system", "esp_hw", "esp_clk", "esp_sleep"],
+    "ipc": ["esp_ipc", "ipc_"],
+    "wifi_config": [
+        "g_cnxMgr",
+        "gChmCxt",
+        "g_ic",
+        "TxRxCxt",
+        "s_dp",
+        "s_ni",
+        "s_reg_dump",
+        "packet$",
+        "d_mult_table",
+        "K",
+        "fcstab",
+    ],
+    "smartconfig": ["sc_ack_send"],
+    "rc_calibration": ["rc_cal", "rcUpdate"],
+    "noise_floor": ["noise_check"],
+    "rf_calibration": [
+        "set_rx_sense",
+        "set_rx_gain_cal",
+        "set_chan_dig_gain",
+        "tx_pwctrl_init_cal",
+        "rfcal_txiq",
+        "set_tx_gain_table",
+        "correct_rfpll_offset",
+        "pll_correct_dcap",
+        "txiq_cal_init",
+        "pwdet_sar",
+        "rx_11b_opt",
+    ],
+    "wifi_crypto": [
+        "pk_use_ecparams",
+        "process_segments",
+        "ccmp_",
+        "rc4_",
+        "aria_",
+        "mgf_mask",
+        "dh_group",
+        "ccmp_aad_nonce",
+        "ccmp_encrypt",
+        "rc4_skip",
+        "aria_sb1",
+        "aria_sb2",
+        "aria_is1",
+        "aria_is2",
+        "aria_sl",
+        "aria_a",
+    ],
+    "radio_control": ["fsm_input", "fsm_sconfreq"],
+    "pbuf": [
+        "pbuf_",
+    ],
+    "event_group": ["xEventGroup"],
+    "ringbuffer": ["xRingbuffer", "prvSend", "prvReceive", "prvCopy"],
+    "provisioning": ["prov_", "prov_stop_and_notify"],
+    "scan": ["gScanStruct"],
+    "port": ["xPort"],
+    "elf_loader": [
+        "elf_add",
+        "elf_add_note",
+        "elf_add_segment",
+        "process_image",
+        "read_encoded",
+        "read_encoded_value",
+        "read_encoded_value_with_base",
+        "process_image_header",
+    ],
+    "socket_api": [
+        "sockets",
+        "netconn_",
+        "accept_function",
+        "recv_raw",
+        "socket_ipv4_multicast",
+        "socket_ipv6_multicast",
+    ],
+    "igmp": ["igmp_", "igmp_send", "igmp_input"],
+    "icmp6": ["icmp6_"],
+    "arp": ["arp_table"],
+    "ampdu": [
+        "ampdu_",
+        "rcAmpdu",
+        "trc_onAmpduOp",
+        "rcAmpduLowerRate",
+        "ampdu_dispatch_upto",
+    ],
+    "ieee802_11": ["ieee802_11_", "ieee802_11_parse_elems"],
+    "rate_control": ["rssi_margin", "rcGetSched", "get_rate_fcc_index"],
+    "nan": ["nan_dp_", "nan_dp_post_tx", "nan_dp_delete_peer"],
+    "channel_mgmt": ["chm_init", "chm_set_current_channel"],
+    "trace": ["trc_init", "trc_onAmpduOp"],
+    "country_code": ["country_info", "country_info_24ghz"],
+    "multicore": ["do_multicore_settings"],
+    "Update_lib": ["Update"],
+    "stdio": [
+        "__sf",
+        "__sflush_r",
+        "__srefill_r",
+        "_impure_data",
+        "_reclaim_reent",
+        "_open_r",
+    ],
+    "strncpy_ops": ["strncpy"],
+    "math_internal": ["__mdiff", "__lshift", "__mprec_tens", "quorem"],
+    "character_class": ["__chclass"],
+    "camellia": ["camellia_", "camellia_feistel"],
+    "crypto_tables": ["FSb", "FSb2", "FSb3", "FSb4"],
+    "event_buffer": ["g_eb_list_desc", "eb_space"],
+    "base_node": ["base_node_", "base_node_add_handler"],
+    "file_descriptor": ["s_fd_table"],
+    "tx_delay": ["tx_delay_cfg"],
+    "deinit": ["deinit_functions"],
+    "lcp_echo": ["LcpEchoCheck"],
+    "raw_api": ["raw_bind", "raw_connect"],
+    "checksum": ["process_checksum"],
+    "entry_management": ["add_entry"],
+    "esp_ota": ["esp_ota", "ota_", "read_otadata"],
+    "http_server": [
+        "httpd_",
+        "parse_url_char",
+        "cb_headers_complete",
+        "delete_entry",
+        "validate_structure",
+        "config_save",
+        "config_new",
+        "verify_url",
+        "cb_url",
+    ],
+    "misc_system": [
+        "alarm_cbs",
+        "start_up",
+        "tokens",
+        "unhex",
+        "osi_funcs_ro",
+        "enum_function",
+        "fragment_and_dispatch",
+        "alarm_set",
+        "osi_alarm_new",
+        "config_set_string",
+        "config_update_newest_section",
+        "config_remove_key",
+        "method_strings",
+        "interop_match",
+        "interop_database",
+        "__state_table",
+        "__action_table",
+        "s_stub_table",
+        "s_context",
+        "s_mmu_ctx",
+        "s_get_bus_mask",
+        "hli_queue_put",
+        "list_remove",
+        "list_delete",
+        "lock_acquire_generic",
+        "is_vect_desc_usable",
+        "io_mode_str",
+        "__c$20233",
+        "interface",
+        "read_id_core",
+        "subscribe_idle",
+        "unsubscribe_idle",
+        "s_clkout_handle",
+        "lock_release_generic",
+        "config_set_int",
+        "config_get_int",
+        "config_get_string",
+        "config_has_key",
+        "config_remove_section",
+        "osi_alarm_init",
+        "osi_alarm_deinit",
+        "fixed_queue_enqueue",
+        "fixed_queue_dequeue",
+        "fixed_queue_new",
+        "fixed_pkt_queue_enqueue",
+        "fixed_pkt_queue_new",
+        "list_append",
+        "list_prepend",
+        "list_insert_after",
+        "list_contains",
+        "list_get_node",
+        "hash_function_blob",
+        "cb_no_body",
+        "cb_on_body",
+        "profile_tab",
+        "get_arg",
+        "trim",
+        "buf$",
+        "process_appended_hash_and_sig$constprop$0",
+        "uuidType",
+        "allocate_svc_db_buf",
+        "_hostname_is_ours",
+        "s_hli_handlers",
+        "tick_cb",
+        "idle_cb",
+        "input",
+        "entry_find",
+        "section_find",
+        "find_bucket_entry_",
+        "config_has_section",
+        "hli_queue_create",
+        "hli_queue_get",
+        "hli_c_handler",
+        "future_ready",
+        "future_await",
+        "future_new",
+        "pkt_queue_enqueue",
+        "pkt_queue_dequeue",
+        "pkt_queue_cleanup",
+        "pkt_queue_create",
+        "pkt_queue_destroy",
+        "fixed_pkt_queue_dequeue",
+        "osi_alarm_cancel",
+        "osi_alarm_is_active",
+        "osi_sem_take",
+        "osi_event_create",
+        "osi_event_bind",
+        "alarm_cb_handler",
+        "list_foreach",
+        "list_back",
+        "list_front",
+        "list_clear",
+        "fixed_queue_try_peek_first",
+        "translate_path",
+        "get_idx",
+        "find_key",
+        "init",
+        "end",
+        "start",
+        "set_read_value",
+        "copy_address_list",
+        "copy_and_key",
+        "sdk_cfg_opts",
+        "leftshift_onebit",
+        "config_section_end",
+        "config_section_begin",
+        "find_entry_and_check_all_reset",
+        "image_validate",
+        "xPendingReadyList",
+        "vListInitialise",
+        "lock_init_generic",
+        "ant_bttx_cfg",
+        "ant_dft_cfg",
+        "cs_send_to_ctrl_sock",
+        "config_llc_util_funcs_reset",
+        "make_set_adv_report_flow_control",
+        "make_set_event_mask",
+        "raw_new",
+        "raw_remove",
+        "BTE_InitStack",
+        "parse_read_local_supported_features_response",
+        "__math_invalidf",
+        "tinytens",
+        "__mprec_tinytens",
+        "__mprec_bigtens",
+        "vRingbufferDelete",
+        "vRingbufferDeleteWithCaps",
+        "vRingbufferReturnItem",
+        "vRingbufferReturnItemFromISR",
+        "get_acl_data_size_ble",
+        "get_features_ble",
+        "get_features_classic",
+        "get_acl_packet_size_ble",
+        "get_acl_packet_size_classic",
+        "supports_extended_inquiry_response",
+        "supports_rssi_with_inquiry_results",
+        "supports_interlaced_inquiry_scan",
+        "supports_reading_remote_extended_features",
+    ],
+    "bluetooth_ll": [
+        "lld_pdu_",
+        "ld_acl_",
+        "lld_stop_ind_handler",
+        "lld_evt_winsize_change",
+        "config_lld_evt_funcs_reset",
+        "config_lld_funcs_reset",
+        "config_llm_funcs_reset",
+        "llm_set_long_adv_data",
+        "lld_retry_tx_prog",
+        "llc_link_sup_to_ind_handler",
+        "config_llc_funcs_reset",
+        "lld_evt_rxwin_compute",
+        "config_btdm_funcs_reset",
+        "config_ea_funcs_reset",
+        "llc_defalut_state_tab_reset",
+        "config_rwip_funcs_reset",
+        "ke_lmp_rx_flooding_detect",
+    ],
+}
+
+# Demangled patterns: patterns found in demangled C++ names
+DEMANGLED_PATTERNS = {
+    "gpio_driver": ["GPIO"],
+    "uart_driver": ["UART"],
+    "network_stack": [
+        "lwip",
+        "tcp",
+        "udp",
+        "ip4",
+        "ip6",
+        "dhcp",
+        "dns",
+        "netif",
+        "ethernet",
+        "ppp",
+        "slip",
+    ],
+    "wifi_stack": ["NetworkInterface"],
+    "nimble_bt": [
+        "nimble",
+        "NimBLE",
+        "ble_hs",
+        "ble_gap",
+        "ble_gatt",
+        "ble_att",
+        "ble_l2cap",
+        "ble_sm",
+    ],
+    "crypto": ["mbedtls", "crypto", "sha", "aes", "rsa", "ecc", "tls", "ssl"],
+    "cpp_stdlib": ["std::", "__gnu_cxx::", "__cxxabiv"],
+    "static_init": ["__static_initialization"],
+    "rtti": ["__type_info", "__class_type_info"],
+    "web_server_lib": ["AsyncWebServer", "AsyncWebHandler", "WebServer"],
+    "async_tcp": ["AsyncClient", "AsyncServer"],
+    "mdns_lib": ["mdns"],
+    "json_lib": [
+        "ArduinoJson",
+        "JsonDocument",
+        "JsonArray",
+        "JsonObject",
+        "deserialize",
+        "serialize",
+    ],
+    "http_lib": ["HTTP", "http_", "Request", "Response", "Uri", "WebSocket"],
+    "logging": ["log", "Log", "print", "Print", "diag_"],
+    "authentication": ["checkDigestAuthentication"],
+    "libgcc": ["libgcc"],
+    "esp_system": ["esp_", "ESP"],
+    "arduino": ["arduino"],
+    "nvs": ["nvs_", "_ZTVN3nvs", "nvs::"],
+    "filesystem": ["spiffs", "vfs"],
+    "libc": ["newlib"],
+}
+
+# Patterns for categorizing ESPHome core symbols into subcategories
+CORE_SUBCATEGORY_PATTERNS = {
+    "Component Framework": ["Component"],
+    "Application Core": ["Application"],
+    "Scheduler": ["Scheduler"],
+    "Component Iterator": ["ComponentIterator"],
+    "Helper Functions": ["Helpers", "helpers"],
+    "Preferences/Storage": ["Preferences", "ESPPreferences"],
+    "I/O Utilities": ["HighFrequencyLoopRequester"],
+    "String Utilities": ["str_"],
+    "Bit Utilities": ["reverse_bits"],
+    "Data Conversion": ["convert_"],
+    "Network Utilities": ["network", "IPAddress"],
+    "API Protocol": ["api::"],
+    "WiFi Manager": ["wifi::"],
+    "MQTT Client": ["mqtt::"],
+    "Logger": ["logger::"],
+    "OTA Updates": ["ota::"],
+    "Web Server": ["web_server::"],
+    "Time Management": ["time::"],
+    "Sensor Framework": ["sensor::"],
+    "Binary Sensor": ["binary_sensor::"],
+    "Switch Framework": ["switch_::"],
+    "Light Framework": ["light::"],
+    "Climate Framework": ["climate::"],
+    "Cover Framework": ["cover::"],
+}

esphome/analyze_memory/helpers.py

@@ -0,0 +1,121 @@
+"""Helper functions for memory analysis."""
+
+from functools import cache
+from pathlib import Path
+
+from .const import SECTION_MAPPING
+
+# Import namespace constant from parent module
+# Note: This would create a circular import if done at module level,
+# so we'll define it locally here as well
+_NAMESPACE_ESPHOME = "esphome::"
+
+
+# Get the list of actual ESPHome components by scanning the components directory
+@cache
+def get_esphome_components():
+    """Get set of actual ESPHome components from the components directory."""
+    # Find the components directory relative to this file
+    # Go up two levels from analyze_memory/helpers.py to esphome/
+    current_dir = Path(__file__).parent.parent
+    components_dir = current_dir / "components"
+
+    if not components_dir.exists() or not components_dir.is_dir():
+        return frozenset()
+
+    return frozenset(
+        item.name
+        for item in components_dir.iterdir()
+        if item.is_dir()
+        and not item.name.startswith(".")
+        and not item.name.startswith("__")
+    )
+
+
+@cache
+def get_component_class_patterns(component_name: str) -> list[str]:
+    """Generate component class name patterns for symbol matching.
+
+    Args:
+        component_name: The component name (e.g., "ota", "wifi", "api")
+
+    Returns:
+        List of pattern strings to match against demangled symbols
+    """
+    component_upper = component_name.upper()
+    component_camel = component_name.replace("_", "").title()
+    return [
+        f"{_NAMESPACE_ESPHOME}{component_upper}Component",  # e.g., esphome::OTAComponent
+        f"{_NAMESPACE_ESPHOME}ESPHome{component_upper}Component",  # e.g., esphome::ESPHomeOTAComponent
+        f"{_NAMESPACE_ESPHOME}{component_camel}Component",  # e.g., esphome::OtaComponent
+        f"{_NAMESPACE_ESPHOME}ESPHome{component_camel}Component",  # e.g., esphome::ESPHomeOtaComponent
+    ]
+
+
+def map_section_name(raw_section: str) -> str | None:
+    """Map raw section name to standard section.
+
+    Args:
+        raw_section: Raw section name from ELF file (e.g., ".iram0.text", ".rodata.str1.1")
+
+    Returns:
+        Standard section name (".text", ".rodata", ".data", ".bss") or None
+    """
+    for standard_section, patterns in SECTION_MAPPING.items():
+        if any(pattern in raw_section for pattern in patterns):
+            return standard_section
+    return None
+
+
+def parse_symbol_line(line: str) -> tuple[str, str, int, str] | None:
+    """Parse a single symbol line from objdump output.
+
+    Args:
+        line: Line from objdump -t output
+
+    Returns:
+        Tuple of (section, name, size, address) or None if not a valid symbol.
+        Format: address l/g w/d F/O section size name
+        Example: 40084870 l     F .iram0.text    00000000 _xt_user_exc
+    """
+    parts = line.split()
+    if len(parts) < 5:
+        return None
+
+    try:
+        # Validate and extract address
+        address = parts[0]
+        int(address, 16)
+    except ValueError:
+        return None
+
+    # Look for F (function) or O (object) flag
+    if "F" not in parts and "O" not in parts:
+        return None
+
+    # Find section, size, and name
+    for i, part in enumerate(parts):
+        if not part.startswith("."):
+            continue
+
+        section = map_section_name(part)
+        if not section:
+            break
+
+        # Need at least size field after section
+        if i + 1 >= len(parts):
+            break
+
+        try:
+            size = int(parts[i + 1], 16)
+        except ValueError:
+            break
+
+        # Need symbol name and non-zero size
+        if i + 2 >= len(parts) or size == 0:
+            break
+
+        name = " ".join(parts[i + 2 :])
+        return (section, name, size, address)
+
+    return None

esphome/components/thermostat/climate.py

@@ -71,9 +71,14 @@ from esphome.const import (
     CONF_VISUAL,
 )
 
-CONF_PRESET_CHANGE = "preset_change"
 CONF_DEFAULT_PRESET = "default_preset"
+CONF_HUMIDITY_CONTROL_DEHUMIDIFY_ACTION = "humidity_control_dehumidify_action"
+CONF_HUMIDITY_CONTROL_HUMIDIFY_ACTION = "humidity_control_humidify_action"
+CONF_HUMIDITY_CONTROL_OFF_ACTION = "humidity_control_off_action"
+CONF_HUMIDITY_HYSTERESIS = "humidity_hysteresis"
 CONF_ON_BOOT_RESTORE_FROM = "on_boot_restore_from"
+CONF_PRESET_CHANGE = "preset_change"
+CONF_TARGET_HUMIDITY_CHANGE_ACTION = "target_humidity_change_action"
 
 CODEOWNERS = ["@kbx81"]
 
@@ -241,6 +246,14 @@ def validate_thermostat(config):
             CONF_MAX_HEATING_RUN_TIME,
             CONF_SUPPLEMENTAL_HEATING_ACTION,
         ],
+        CONF_HUMIDITY_CONTROL_DEHUMIDIFY_ACTION: [
+            CONF_HUMIDITY_CONTROL_OFF_ACTION,
+            CONF_HUMIDITY_SENSOR,
+        ],
+        CONF_HUMIDITY_CONTROL_HUMIDIFY_ACTION: [
+            CONF_HUMIDITY_CONTROL_OFF_ACTION,
+            CONF_HUMIDITY_SENSOR,
+        ],
     }
     for config_trigger, req_triggers in requirements.items():
         for req_trigger in req_triggers:
@@ -338,7 +351,7 @@ def validate_thermostat(config):
     # Warn about using the removed CONF_DEFAULT_MODE and advise users
     if CONF_DEFAULT_MODE in config and config[CONF_DEFAULT_MODE] is not None:
         raise cv.Invalid(
-            f"{CONF_DEFAULT_MODE} is no longer valid. Please switch to using presets and specify a {CONF_DEFAULT_PRESET}."
+            f"{CONF_DEFAULT_MODE} is no longer valid. Please switch to using presets and specify a {CONF_DEFAULT_PRESET}"
         )
 
     default_mode = config[CONF_DEFAULT_MODE]
@@ -588,9 +601,24 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SWING_VERTICAL_ACTION): automation.validate_automation(
                 single=True
             ),
+            cv.Optional(
+                CONF_TARGET_HUMIDITY_CHANGE_ACTION
+            ): automation.validate_automation(single=True),
             cv.Optional(
                 CONF_TARGET_TEMPERATURE_CHANGE_ACTION
             ): automation.validate_automation(single=True),
+            cv.Exclusive(
+                CONF_HUMIDITY_CONTROL_DEHUMIDIFY_ACTION,
+                group_of_exclusion="humidity_control",
+            ): automation.validate_automation(single=True),
+            cv.Exclusive(
+                CONF_HUMIDITY_CONTROL_HUMIDIFY_ACTION,
+                group_of_exclusion="humidity_control",
+            ): automation.validate_automation(single=True),
+            cv.Optional(
+                CONF_HUMIDITY_CONTROL_OFF_ACTION
+            ): automation.validate_automation(single=True),
+            cv.Optional(CONF_HUMIDITY_HYSTERESIS, default=1.0): cv.percentage,
             cv.Optional(CONF_DEFAULT_MODE, default=None): cv.valid,
             cv.Optional(CONF_DEFAULT_PRESET): cv.templatable(cv.string),
             cv.Optional(CONF_DEFAULT_TARGET_TEMPERATURE_HIGH): cv.temperature,
@@ -882,12 +910,39 @@ async def to_code(config):
             config[CONF_SWING_VERTICAL_ACTION],
         )
         cg.add(var.set_supports_swing_mode_vertical(True))
+    if CONF_TARGET_HUMIDITY_CHANGE_ACTION in config:
+        await automation.build_automation(
+            var.get_humidity_change_trigger(),
+            [],
+            config[CONF_TARGET_HUMIDITY_CHANGE_ACTION],
+        )
     if CONF_TARGET_TEMPERATURE_CHANGE_ACTION in config:
         await automation.build_automation(
             var.get_temperature_change_trigger(),
             [],
             config[CONF_TARGET_TEMPERATURE_CHANGE_ACTION],
         )
+    if CONF_HUMIDITY_CONTROL_DEHUMIDIFY_ACTION in config:
+        cg.add(var.set_supports_dehumidification(True))
+        await automation.build_automation(
+            var.get_humidity_control_dehumidify_action_trigger(),
+            [],
+            config[CONF_HUMIDITY_CONTROL_DEHUMIDIFY_ACTION],
+        )
+    if CONF_HUMIDITY_CONTROL_HUMIDIFY_ACTION in config:
+        cg.add(var.set_supports_humidification(True))
+        await automation.build_automation(
+            var.get_humidity_control_humidify_action_trigger(),
+            [],
+            config[CONF_HUMIDITY_CONTROL_HUMIDIFY_ACTION],
+        )
+    if CONF_HUMIDITY_CONTROL_OFF_ACTION in config:
+        await automation.build_automation(
+            var.get_humidity_control_off_action_trigger(),
+            [],
+            config[CONF_HUMIDITY_CONTROL_OFF_ACTION],
+        )
+    cg.add(var.set_humidity_hysteresis(config[CONF_HUMIDITY_HYSTERESIS]))
 
     if CONF_PRESET in config:
         for preset_config in config[CONF_PRESET]:

esphome/components/thermostat/thermostat_climate.cpp

@@ -32,6 +32,7 @@ void ThermostatClimate::setup() {
   if (this->humidity_sensor_ != nullptr) {
     this->humidity_sensor_->add_on_state_callback([this](float state) {
       this->current_humidity = state;
+      this->switch_to_humidity_control_action_(this->compute_humidity_control_action_());
       this->publish_state();
     });
     this->current_humidity = this->humidity_sensor_->state;
@@ -84,6 +85,8 @@ void ThermostatClimate::refresh() {
   this->switch_to_supplemental_action_(this->compute_supplemental_action_());
   this->switch_to_fan_mode_(this->fan_mode.value(), false);
   this->switch_to_swing_mode_(this->swing_mode, false);
+  this->switch_to_humidity_control_action_(this->compute_humidity_control_action_());
+  this->check_humidity_change_trigger_();
   this->check_temperature_change_trigger_();
   this->publish_state();
 }
@@ -129,6 +132,11 @@ bool ThermostatClimate::hysteresis_valid() {
   return true;
 }
 
+bool ThermostatClimate::humidity_hysteresis_valid() {
+  return !std::isnan(this->humidity_hysteresis_) && this->humidity_hysteresis_ >= 0.0f &&
+         this->humidity_hysteresis_ < 100.0f;
+}
+
 bool ThermostatClimate::limit_setpoints_for_heat_cool() {
   return this->mode == climate::CLIMATE_MODE_HEAT_COOL ||
          (this->mode == climate::CLIMATE_MODE_AUTO && this->supports_heat_cool_);
@@ -189,6 +197,16 @@ void ThermostatClimate::validate_target_temperature_high() {
   }
 }
 
+void ThermostatClimate::validate_target_humidity() {
+  if (std::isnan(this->target_humidity)) {
+    this->target_humidity =
+        (this->get_traits().get_visual_max_humidity() - this->get_traits().get_visual_min_humidity()) / 2.0f;
+  } else {
+    this->target_humidity = clamp<float>(this->target_humidity, this->get_traits().get_visual_min_humidity(),
+                                         this->get_traits().get_visual_max_humidity());
+  }
+}
+
 void ThermostatClimate::control(const climate::ClimateCall &call) {
   bool target_temperature_high_changed = false;
 
@@ -235,6 +253,10 @@ void ThermostatClimate::control(const climate::ClimateCall &call) {
       this->validate_target_temperature();
     }
   }
+  if (call.get_target_humidity().has_value()) {
+    this->target_humidity = call.get_target_humidity().value();
+    this->validate_target_humidity();
+  }
   // make any changes happen
   this->refresh();
 }
@@ -250,6 +272,9 @@ climate::ClimateTraits ThermostatClimate::traits() {
   if (this->humidity_sensor_ != nullptr)
     traits.add_feature_flags(climate::CLIMATE_SUPPORTS_CURRENT_HUMIDITY);
 
+  if (this->supports_humidification_ || this->supports_dehumidification_)
+    traits.add_feature_flags(climate::CLIMATE_SUPPORTS_TARGET_HUMIDITY);
+
   if (this->supports_auto_)
     traits.add_supported_mode(climate::CLIMATE_MODE_AUTO);
   if (this->supports_heat_cool_)
@@ -423,6 +448,28 @@ climate::ClimateAction ThermostatClimate::compute_supplemental_action_() {
   return target_action;
 }
 
+HumidificationAction ThermostatClimate::compute_humidity_control_action_() {
+  auto target_action = THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF;
+  // if hysteresis value or current_humidity is not valid, we go to OFF
+  if (std::isnan(this->current_humidity) || !this->humidity_hysteresis_valid()) {
+    return THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF;
+  }
+
+  // ensure set point is valid before computing the action
+  this->validate_target_humidity();
+  // everything has been validated so we can now safely compute the action
+  if (this->dehumidification_required_() && this->humidification_required_()) {
+    // this is bad and should never happen, so just stop.
+    // target_action = THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF;
+  } else if (this->supports_dehumidification_ && this->dehumidification_required_()) {
+    target_action = THERMOSTAT_HUMIDITY_CONTROL_ACTION_DEHUMIDIFY;
+  } else if (this->supports_humidification_ && this->humidification_required_()) {
+    target_action = THERMOSTAT_HUMIDITY_CONTROL_ACTION_HUMIDIFY;
+  }
+
+  return target_action;
+}
+
 void ThermostatClimate::switch_to_action_(climate::ClimateAction action, bool publish_state) {
   // setup_complete_ helps us ensure an action is called immediately after boot
   if ((action == this->action) && this->setup_complete_) {
@@ -596,6 +643,44 @@ void ThermostatClimate::trigger_supplemental_action_() {
   }
 }
 
+void ThermostatClimate::switch_to_humidity_control_action_(HumidificationAction action) {
+  // setup_complete_ helps us ensure an action is called immediately after boot
+  if ((action == this->humidification_action_) && this->setup_complete_) {
+    // already in target mode
+    return;
+  }
+
+  Trigger<> *trig = this->humidity_control_off_action_trigger_;
+  switch (action) {
+    case THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF:
+      // trig = this->humidity_control_off_action_trigger_;
+      ESP_LOGVV(TAG, "Switching to HUMIDIFICATION_OFF action");
+      break;
+    case THERMOSTAT_HUMIDITY_CONTROL_ACTION_DEHUMIDIFY:
+      trig = this->humidity_control_dehumidify_action_trigger_;
+      ESP_LOGVV(TAG, "Switching to DEHUMIDIFY action");
+      break;
+    case THERMOSTAT_HUMIDITY_CONTROL_ACTION_HUMIDIFY:
+      trig = this->humidity_control_humidify_action_trigger_;
+      ESP_LOGVV(TAG, "Switching to HUMIDIFY action");
+      break;
+    case THERMOSTAT_HUMIDITY_CONTROL_ACTION_NONE:
+    default:
+      action = THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF;
+      // trig = this->humidity_control_off_action_trigger_;
+  }
+
+  if (this->prev_humidity_control_trigger_ != nullptr) {
+    this->prev_humidity_control_trigger_->stop_action();
+    this->prev_humidity_control_trigger_ = nullptr;
+  }
+  this->humidification_action_ = action;
+  this->prev_humidity_control_trigger_ = trig;
+  if (trig != nullptr) {
+    trig->trigger();
+  }
+}
+
 void ThermostatClimate::switch_to_fan_mode_(climate::ClimateFanMode fan_mode, bool publish_state) {
   // setup_complete_ helps us ensure an action is called immediately after boot
   if ((fan_mode == this->prev_fan_mode_) && this->setup_complete_) {
@@ -887,6 +972,20 @@ void ThermostatClimate::idle_on_timer_callback_() {
   this->switch_to_supplemental_action_(this->compute_supplemental_action_());
 }
 
+void ThermostatClimate::check_humidity_change_trigger_() {
+  if ((this->prev_target_humidity_ == this->target_humidity) && this->setup_complete_) {
+    return;  // nothing changed, no reason to trigger
+  } else {
+    // save the new temperature so we can check it again later; the trigger will fire below
+    this->prev_target_humidity_ = this->target_humidity;
+  }
+  // trigger the action
+  Trigger<> *trig = this->humidity_change_trigger_;
+  if (trig != nullptr) {
+    trig->trigger();
+  }
+}
+
 void ThermostatClimate::check_temperature_change_trigger_() {
   if (this->supports_two_points_) {
     // setup_complete_ helps us ensure an action is called immediately after boot
@@ -996,6 +1095,32 @@ bool ThermostatClimate::supplemental_heating_required_() {
           (this->supplemental_action_ == climate::CLIMATE_ACTION_HEATING));
 }
 
+bool ThermostatClimate::dehumidification_required_() {
+  if (this->current_humidity > this->target_humidity + this->humidity_hysteresis_) {
+    // if the current humidity exceeds the target + hysteresis, dehumidification is required
+    return true;
+  } else if (this->current_humidity < this->target_humidity - this->humidity_hysteresis_) {
+    // if the current humidity is less than the target - hysteresis, dehumidification should stop
+    return false;
+  }
+  // if we get here, the current humidity is between target + hysteresis and target - hysteresis,
+  //  so the action should not change
+  return this->humidification_action_ == THERMOSTAT_HUMIDITY_CONTROL_ACTION_DEHUMIDIFY;
+}
+
+bool ThermostatClimate::humidification_required_() {
+  if (this->current_humidity < this->target_humidity - this->humidity_hysteresis_) {
+    // if the current humidity is below the target - hysteresis, humidification is required
+    return true;
+  } else if (this->current_humidity > this->target_humidity + this->humidity_hysteresis_) {
+    // if the current humidity is above the target + hysteresis, humidification should stop
+    return false;
+  }
+  // if we get here, the current humidity is between target - hysteresis and target + hysteresis,
+  //  so the action should not change
+  return this->humidification_action_ == THERMOSTAT_HUMIDITY_CONTROL_ACTION_HUMIDIFY;
+}
+
 void ThermostatClimate::dump_preset_config_(const char *preset_name, const ThermostatClimateTargetTempConfig &config) {
   if (this->supports_heat_) {
     ESP_LOGCONFIG(TAG, "      Default Target Temperature Low: %.1f°C",
@@ -1152,8 +1277,12 @@ ThermostatClimate::ThermostatClimate()
       swing_mode_off_trigger_(new Trigger<>()),
       swing_mode_horizontal_trigger_(new Trigger<>()),
       swing_mode_vertical_trigger_(new Trigger<>()),
+      humidity_change_trigger_(new Trigger<>()),
       temperature_change_trigger_(new Trigger<>()),
-      preset_change_trigger_(new Trigger<>()) {}
+      preset_change_trigger_(new Trigger<>()),
+      humidity_control_dehumidify_action_trigger_(new Trigger<>()),
+      humidity_control_humidify_action_trigger_(new Trigger<>()),
+      humidity_control_off_action_trigger_(new Trigger<>()) {}
 
 void ThermostatClimate::set_default_preset(const std::string &custom_preset) {
   this->default_custom_preset_ = custom_preset;
@@ -1217,6 +1346,9 @@ void ThermostatClimate::set_sensor(sensor::Sensor *sensor) { this->sensor_ = sen
 void ThermostatClimate::set_humidity_sensor(sensor::Sensor *humidity_sensor) {
   this->humidity_sensor_ = humidity_sensor;
 }
+void ThermostatClimate::set_humidity_hysteresis(float humidity_hysteresis) {
+  this->humidity_hysteresis_ = std::clamp<float>(humidity_hysteresis, 0.0f, 100.0f);
+}
 void ThermostatClimate::set_use_startup_delay(bool use_startup_delay) { this->use_startup_delay_ = use_startup_delay; }
 void ThermostatClimate::set_supports_heat_cool(bool supports_heat_cool) {
   this->supports_heat_cool_ = supports_heat_cool;
@@ -1284,6 +1416,18 @@ void ThermostatClimate::set_supports_swing_mode_vertical(bool supports_swing_mod
 void ThermostatClimate::set_supports_two_points(bool supports_two_points) {
   this->supports_two_points_ = supports_two_points;
 }
+void ThermostatClimate::set_supports_dehumidification(bool supports_dehumidification) {
+  this->supports_dehumidification_ = supports_dehumidification;
+  if (supports_dehumidification) {
+    this->supports_humidification_ = false;
+  }
+}
+void ThermostatClimate::set_supports_humidification(bool supports_humidification) {
+  this->supports_humidification_ = supports_humidification;
+  if (supports_humidification) {
+    this->supports_dehumidification_ = false;
+  }
+}
 
 Trigger<> *ThermostatClimate::get_cool_action_trigger() const { return this->cool_action_trigger_; }
 Trigger<> *ThermostatClimate::get_supplemental_cool_action_trigger() const {
@@ -1317,8 +1461,18 @@ Trigger<> *ThermostatClimate::get_swing_mode_both_trigger() const { return this-
 Trigger<> *ThermostatClimate::get_swing_mode_off_trigger() const { return this->swing_mode_off_trigger_; }
 Trigger<> *ThermostatClimate::get_swing_mode_horizontal_trigger() const { return this->swing_mode_horizontal_trigger_; }
 Trigger<> *ThermostatClimate::get_swing_mode_vertical_trigger() const { return this->swing_mode_vertical_trigger_; }
+Trigger<> *ThermostatClimate::get_humidity_change_trigger() const { return this->humidity_change_trigger_; }
 Trigger<> *ThermostatClimate::get_temperature_change_trigger() const { return this->temperature_change_trigger_; }
 Trigger<> *ThermostatClimate::get_preset_change_trigger() const { return this->preset_change_trigger_; }
+Trigger<> *ThermostatClimate::get_humidity_control_dehumidify_action_trigger() const {
+  return this->humidity_control_dehumidify_action_trigger_;
+}
+Trigger<> *ThermostatClimate::get_humidity_control_humidify_action_trigger() const {
+  return this->humidity_control_humidify_action_trigger_;
+}
+Trigger<> *ThermostatClimate::get_humidity_control_off_action_trigger() const {
+  return this->humidity_control_off_action_trigger_;
+}
 
 void ThermostatClimate::dump_config() {
   LOG_CLIMATE("", "Thermostat", this);
@@ -1422,7 +1576,12 @@ void ThermostatClimate::dump_config() {
                 "    OFF: %s\n"
                 "    HORIZONTAL: %s\n"
                 "    VERTICAL: %s\n"
-                "  Supports TWO SET POINTS: %s",
+                "  Supports TWO SET POINTS: %s\n"
+                "  Supported Humidity Parameters:\n"
+                "    CURRENT: %s\n"
+                "    TARGET: %s\n"
+                "    DEHUMIDIFICATION: %s\n"
+                "    HUMIDIFICATION: %s",
                 YESNO(this->supports_fan_mode_on_), YESNO(this->supports_fan_mode_off_),
                 YESNO(this->supports_fan_mode_auto_), YESNO(this->supports_fan_mode_low_),
                 YESNO(this->supports_fan_mode_medium_), YESNO(this->supports_fan_mode_high_),
@@ -1430,7 +1589,10 @@ void ThermostatClimate::dump_config() {
                 YESNO(this->supports_fan_mode_diffuse_), YESNO(this->supports_fan_mode_quiet_),
                 YESNO(this->supports_swing_mode_both_), YESNO(this->supports_swing_mode_off_),
                 YESNO(this->supports_swing_mode_horizontal_), YESNO(this->supports_swing_mode_vertical_),
-                YESNO(this->supports_two_points_));
+                YESNO(this->supports_two_points_),
+                YESNO(this->get_traits().has_feature_flags(climate::CLIMATE_SUPPORTS_CURRENT_HUMIDITY)),
+                YESNO(this->supports_dehumidification_ || this->supports_humidification_),
+                YESNO(this->supports_dehumidification_), YESNO(this->supports_humidification_));
 
   if (!this->preset_config_.empty()) {
     ESP_LOGCONFIG(TAG, "  Supported PRESETS:");

esphome/components/thermostat/thermostat_climate.h

@@ -13,6 +13,13 @@
 namespace esphome {
 namespace thermostat {
 
+enum HumidificationAction : uint8_t {
+  THERMOSTAT_HUMIDITY_CONTROL_ACTION_OFF = 0,
+  THERMOSTAT_HUMIDITY_CONTROL_ACTION_DEHUMIDIFY = 1,
+  THERMOSTAT_HUMIDITY_CONTROL_ACTION_HUMIDIFY = 2,
+  THERMOSTAT_HUMIDITY_CONTROL_ACTION_NONE,
+};
+
 enum ThermostatClimateTimerIndex : uint8_t {
   THERMOSTAT_TIMER_COOLING_MAX_RUN_TIME = 0,
   THERMOSTAT_TIMER_COOLING_OFF = 1,
@@ -90,6 +97,7 @@ class ThermostatClimate : public climate::Climate, public Component {
   void set_idle_minimum_time_in_sec(uint32_t time);
   void set_sensor(sensor::Sensor *sensor);
   void set_humidity_sensor(sensor::Sensor *humidity_sensor);
+  void set_humidity_hysteresis(float humidity_hysteresis);
   void set_use_startup_delay(bool use_startup_delay);
   void set_supports_auto(bool supports_auto);
   void set_supports_heat_cool(bool supports_heat_cool);
@@ -115,6 +123,8 @@ class ThermostatClimate : public climate::Climate, public Component {
   void set_supports_swing_mode_horizontal(bool supports_swing_mode_horizontal);
   void set_supports_swing_mode_off(bool supports_swing_mode_off);
   void set_supports_swing_mode_vertical(bool supports_swing_mode_vertical);
+  void set_supports_dehumidification(bool supports_dehumidification);
+  void set_supports_humidification(bool supports_humidification);
   void set_supports_two_points(bool supports_two_points);
 
   void set_preset_config(climate::ClimatePreset preset, const ThermostatClimateTargetTempConfig &config);
@@ -148,8 +158,12 @@ class ThermostatClimate : public climate::Climate, public Component {
   Trigger<> *get_swing_mode_horizontal_trigger() const;
   Trigger<> *get_swing_mode_off_trigger() const;
   Trigger<> *get_swing_mode_vertical_trigger() const;
+  Trigger<> *get_humidity_change_trigger() const;
   Trigger<> *get_temperature_change_trigger() const;
   Trigger<> *get_preset_change_trigger() const;
+  Trigger<> *get_humidity_control_dehumidify_action_trigger() const;
+  Trigger<> *get_humidity_control_humidify_action_trigger() const;
+  Trigger<> *get_humidity_control_off_action_trigger() const;
   /// Get current hysteresis values
   float cool_deadband();
   float cool_overrun();
@@ -166,11 +180,13 @@ class ThermostatClimate : public climate::Climate, public Component {
   climate::ClimateFanMode locked_fan_mode();
   /// Set point and hysteresis validation
   bool hysteresis_valid();               // returns true if valid
+  bool humidity_hysteresis_valid();      // returns true if valid
   bool limit_setpoints_for_heat_cool();  // returns true if set points should be further limited within visual range
   void validate_target_temperature();
   void validate_target_temperatures(bool pin_target_temperature_high);
   void validate_target_temperature_low();
   void validate_target_temperature_high();
+  void validate_target_humidity();
 
  protected:
   /// Override control to change settings of the climate device.
@@ -192,11 +208,13 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// Re-compute the required action of this climate controller.
   climate::ClimateAction compute_action_(bool ignore_timers = false);
   climate::ClimateAction compute_supplemental_action_();
+  HumidificationAction compute_humidity_control_action_();
 
   /// Switch the climate device to the given climate action.
   void switch_to_action_(climate::ClimateAction action, bool publish_state = true);
   void switch_to_supplemental_action_(climate::ClimateAction action);
   void trigger_supplemental_action_();
+  void switch_to_humidity_control_action_(HumidificationAction action);
 
   /// Switch the climate device to the given climate fan mode.
   void switch_to_fan_mode_(climate::ClimateFanMode fan_mode, bool publish_state = true);
@@ -207,6 +225,9 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// Switch the climate device to the given climate swing mode.
   void switch_to_swing_mode_(climate::ClimateSwingMode swing_mode, bool publish_state = true);
 
+  /// Check if the humidity change trigger should be called.
+  void check_humidity_change_trigger_();
+
   /// Check if the temperature change trigger should be called.
   void check_temperature_change_trigger_();
 
@@ -243,6 +264,8 @@ class ThermostatClimate : public climate::Climate, public Component {
   bool heating_required_();
   bool supplemental_cooling_required_();
   bool supplemental_heating_required_();
+  bool dehumidification_required_();
+  bool humidification_required_();
 
   void dump_preset_config_(const char *preset_name, const ThermostatClimateTargetTempConfig &config);
 
@@ -259,6 +282,9 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// The current supplemental action
   climate::ClimateAction supplemental_action_{climate::CLIMATE_ACTION_OFF};
 
+  /// The current humidification action
+  HumidificationAction humidification_action_{THERMOSTAT_HUMIDITY_CONTROL_ACTION_NONE};
+
   /// Default standard preset to use on start up
   climate::ClimatePreset default_preset_{};
 
@@ -321,6 +347,12 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// A false value means that the controller has no such support.
   bool supports_two_points_{false};
 
+  /// Whether the controller supports dehumidification and/or humidification
+  ///
+  /// A false value means that the controller has no such support.
+  bool supports_dehumidification_{false};
+  bool supports_humidification_{false};
+
   /// Flags indicating if maximum allowable run time was exceeded
   bool cooling_max_runtime_exceeded_{false};
   bool heating_max_runtime_exceeded_{false};
@@ -331,9 +363,10 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// setup_complete_ blocks modifying/resetting the temps immediately after boot
   bool setup_complete_{false};
 
-  /// Store previously-known temperatures
+  /// Store previously-known humidity and temperatures
   ///
-  /// These are used to determine when the temperature change trigger/action needs to be called
+  /// These are used to determine when a temperature/humidity has changed
+  float prev_target_humidity_{NAN};
   float prev_target_temperature_{NAN};
   float prev_target_temperature_low_{NAN};
   float prev_target_temperature_high_{NAN};
@@ -347,6 +380,9 @@ class ThermostatClimate : public climate::Climate, public Component {
   float heating_deadband_{0};
   float heating_overrun_{0};
 
+  /// Hysteresis values used for computing humidification action
+  float humidity_hysteresis_{0};
+
   /// Maximum allowable temperature deltas before engaging supplemental cooling/heating actions
   float supplemental_cool_delta_{0};
   float supplemental_heat_delta_{0};
@@ -448,12 +484,24 @@ class ThermostatClimate : public climate::Climate, public Component {
   /// The trigger to call when the controller should switch the swing mode to "vertical".
   Trigger<> *swing_mode_vertical_trigger_{nullptr};
 
+  /// The trigger to call when the target humidity changes.
+  Trigger<> *humidity_change_trigger_{nullptr};
+
   /// The trigger to call when the target temperature(s) change(es).
   Trigger<> *temperature_change_trigger_{nullptr};
 
   /// The trigger to call when the preset mode changes
   Trigger<> *preset_change_trigger_{nullptr};
 
+  /// The trigger to call when dehumidification is required
+  Trigger<> *humidity_control_dehumidify_action_trigger_{nullptr};
+
+  /// The trigger to call when humidification is required
+  Trigger<> *humidity_control_humidify_action_trigger_{nullptr};
+
+  /// The trigger to call when (de)humidification should stop
+  Trigger<> *humidity_control_off_action_trigger_{nullptr};
+
   /// A reference to the trigger that was previously active.
   ///
   /// This is so that the previous trigger can be stopped before enabling a new one
@@ -462,6 +510,7 @@ class ThermostatClimate : public climate::Climate, public Component {
   Trigger<> *prev_fan_mode_trigger_{nullptr};
   Trigger<> *prev_mode_trigger_{nullptr};
   Trigger<> *prev_swing_mode_trigger_{nullptr};
+  Trigger<> *prev_humidity_control_trigger_{nullptr};
 
   /// Default custom preset to use on start up
   std::string default_custom_preset_{};

esphome/platformio_api.py

@@ -374,3 +374,23 @@ class IDEData:
             return f"{self.cc_path[:-7]}addr2line.exe"
 
         return f"{self.cc_path[:-3]}addr2line"
+
+    @property
+    def objdump_path(self) -> str:
+        # replace gcc at end with objdump
+        path = self.cc_path
+        return (
+            f"{path[:-7]}objdump.exe"
+            if path.endswith(".exe")
+            else f"{path[:-3]}objdump"
+        )
+
+    @property
+    def readelf_path(self) -> str:
+        # replace gcc at end with readelf
+        path = self.cc_path
+        return (
+            f"{path[:-7]}readelf.exe"
+            if path.endswith(".exe")
+            else f"{path[:-3]}readelf"
+        )

script/analyze_component_buses.py

@@ -34,6 +34,8 @@ from typing import Any
 # Add esphome to path
 sys.path.insert(0, str(Path(__file__).parent.parent))
 
+from helpers import BASE_BUS_COMPONENTS
+
 from esphome import yaml_util
 from esphome.config_helpers import Extend, Remove
 
@@ -67,18 +69,6 @@ NO_BUSES_SIGNATURE = "no_buses"
 # Isolated components have unique signatures and cannot be merged with others
 ISOLATED_SIGNATURE_PREFIX = "isolated_"
 
-# Base bus components - these ARE the bus implementations and should not
-# be flagged as needing migration since they are the platform/base components
-BASE_BUS_COMPONENTS = {
-    "i2c",
-    "spi",
-    "uart",
-    "modbus",
-    "canbus",
-    "remote_transmitter",
-    "remote_receiver",
-}
-
 # Components that must be tested in isolation (not grouped or batched with others)
 # These have known build issues that prevent grouping
 # NOTE: This should be kept in sync with both test_build_components and split_components_for_ci.py

script/ci_helpers.py

@@ -0,0 +1,23 @@
+"""Common helper functions for CI scripts."""
+
+from __future__ import annotations
+
+import os
+
+
+def write_github_output(outputs: dict[str, str | int]) -> None:
+    """Write multiple outputs to GITHUB_OUTPUT or stdout.
+
+    When running in GitHub Actions, writes to the GITHUB_OUTPUT file.
+    When running locally, writes to stdout for debugging.
+
+    Args:
+        outputs: Dictionary of key-value pairs to write
+    """
+    github_output = os.environ.get("GITHUB_OUTPUT")
+    if github_output:
+        with open(github_output, "a", encoding="utf-8") as f:
+            f.writelines(f"{key}={value}\n" for key, value in outputs.items())
+    else:
+        for key, value in outputs.items():
+            print(f"{key}={value}")

script/ci_memory_impact_comment.py

@@ -0,0 +1,570 @@
+#!/usr/bin/env python3
+"""Post or update a PR comment with memory impact analysis results.
+
+This script creates or updates a GitHub PR comment with memory usage changes.
+It uses the GitHub CLI (gh) to manage comments and maintains a single comment
+that gets updated on subsequent runs.
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+from pathlib import Path
+import subprocess
+import sys
+
+from jinja2 import Environment, FileSystemLoader
+
+# Add esphome to path for analyze_memory import
+sys.path.insert(0, str(Path(__file__).parent.parent))
+
+# pylint: disable=wrong-import-position
+
+# Comment marker to identify our memory impact comments
+COMMENT_MARKER = "<!-- esphome-memory-impact-analysis -->"
+
+# Thresholds for emoji significance indicators (percentage)
+OVERALL_CHANGE_THRESHOLD = 1.0  # Overall RAM/Flash changes
+COMPONENT_CHANGE_THRESHOLD = 3.0  # Component breakdown changes
+
+# Display limits for tables
+MAX_COMPONENT_BREAKDOWN_ROWS = 20  # Maximum components to show in breakdown table
+MAX_CHANGED_SYMBOLS_ROWS = 30  # Maximum changed symbols to show
+MAX_NEW_SYMBOLS_ROWS = 15  # Maximum new symbols to show
+MAX_REMOVED_SYMBOLS_ROWS = 15  # Maximum removed symbols to show
+
+# Symbol display formatting
+SYMBOL_DISPLAY_MAX_LENGTH = 100  # Max length before using <details> tag
+SYMBOL_DISPLAY_TRUNCATE_LENGTH = 97  # Length to truncate in summary
+
+# Component change noise threshold
+COMPONENT_CHANGE_NOISE_THRESHOLD = 2  # Ignore component changes ≤ this many bytes
+
+# Template directory
+TEMPLATE_DIR = Path(__file__).parent / "templates"
+
+
+def load_analysis_json(json_path: str) -> dict | None:
+    """Load memory analysis results from JSON file.
+
+    Args:
+        json_path: Path to analysis JSON file
+
+    Returns:
+        Dictionary with analysis results or None if file doesn't exist/can't be loaded
+    """
+    json_file = Path(json_path)
+    if not json_file.exists():
+        print(f"Analysis JSON not found: {json_path}", file=sys.stderr)
+        return None
+
+    try:
+        with open(json_file, encoding="utf-8") as f:
+            return json.load(f)
+    except (json.JSONDecodeError, OSError) as e:
+        print(f"Failed to load analysis JSON: {e}", file=sys.stderr)
+        return None
+
+
+def format_bytes(bytes_value: int) -> str:
+    """Format bytes value with comma separators.
+
+    Args:
+        bytes_value: Number of bytes
+
+    Returns:
+        Formatted string with comma separators (e.g., "1,234 bytes")
+    """
+    return f"{bytes_value:,} bytes"
+
+
+def format_change(before: int, after: int, threshold: float | None = None) -> str:
+    """Format memory change with delta and percentage.
+
+    Args:
+        before: Memory usage before change (in bytes)
+        after: Memory usage after change (in bytes)
+        threshold: Optional percentage threshold for "significant" change.
+                   If provided, adds supplemental emoji (🎉/🚨/🔸/✅) to chart icons.
+                   If None, only shows chart icons (📈/📉/➡️).
+
+    Returns:
+        Formatted string with delta and percentage
+    """
+    delta = after - before
+    percentage = 0.0 if before == 0 else (delta / before) * 100
+
+    # Always use chart icons to show direction
+    if delta > 0:
+        delta_str = f"+{delta:,} bytes"
+        trend_icon = "📈"
+        # Add supplemental emoji based on threshold if provided
+        if threshold is not None:
+            significance = "🚨" if abs(percentage) > threshold else "🔸"
+            emoji = f"{trend_icon} {significance}"
+        else:
+            emoji = trend_icon
+    elif delta < 0:
+        delta_str = f"{delta:,} bytes"
+        trend_icon = "📉"
+        # Add supplemental emoji based on threshold if provided
+        if threshold is not None:
+            significance = "🎉" if abs(percentage) > threshold else "✅"
+            emoji = f"{trend_icon} {significance}"
+        else:
+            emoji = trend_icon
+    else:
+        delta_str = "+0 bytes"
+        emoji = "➡️"
+
+    # Format percentage with sign
+    if percentage > 0:
+        pct_str = f"+{percentage:.2f}%"
+    elif percentage < 0:
+        pct_str = f"{percentage:.2f}%"
+    else:
+        pct_str = "0.00%"
+
+    return f"{emoji} {delta_str} ({pct_str})"
+
+
+def prepare_symbol_changes_data(
+    target_symbols: dict | None, pr_symbols: dict | None
+) -> dict | None:
+    """Prepare symbol changes data for template rendering.
+
+    Args:
+        target_symbols: Symbol name to size mapping for target branch
+        pr_symbols: Symbol name to size mapping for PR branch
+
+    Returns:
+        Dictionary with changed, new, and removed symbols, or None if no changes
+    """
+    if not target_symbols or not pr_symbols:
+        return None
+
+    # Find all symbols that exist in both branches or only in one
+    all_symbols = set(target_symbols.keys()) | set(pr_symbols.keys())
+
+    # Track changes
+    changed_symbols: list[
+        tuple[str, int, int, int]
+    ] = []  # (symbol, target_size, pr_size, delta)
+    new_symbols: list[tuple[str, int]] = []  # (symbol, size)
+    removed_symbols: list[tuple[str, int]] = []  # (symbol, size)
+
+    for symbol in all_symbols:
+        target_size = target_symbols.get(symbol, 0)
+        pr_size = pr_symbols.get(symbol, 0)
+
+        if target_size == 0 and pr_size > 0:
+            # New symbol
+            new_symbols.append((symbol, pr_size))
+        elif target_size > 0 and pr_size == 0:
+            # Removed symbol
+            removed_symbols.append((symbol, target_size))
+        elif target_size != pr_size:
+            # Changed symbol
+            delta = pr_size - target_size
+            changed_symbols.append((symbol, target_size, pr_size, delta))
+
+    if not changed_symbols and not new_symbols and not removed_symbols:
+        return None
+
+    # Sort by size/delta
+    changed_symbols.sort(key=lambda x: abs(x[3]), reverse=True)
+    new_symbols.sort(key=lambda x: x[1], reverse=True)
+    removed_symbols.sort(key=lambda x: x[1], reverse=True)
+
+    return {
+        "changed_symbols": changed_symbols,
+        "new_symbols": new_symbols,
+        "removed_symbols": removed_symbols,
+    }
+
+
+def prepare_component_breakdown_data(
+    target_analysis: dict | None, pr_analysis: dict | None
+) -> list[tuple[str, int, int, int]] | None:
+    """Prepare component breakdown data for template rendering.
+
+    Args:
+        target_analysis: Component memory breakdown for target branch
+        pr_analysis: Component memory breakdown for PR branch
+
+    Returns:
+        List of tuples (component, target_flash, pr_flash, delta), or None if no changes
+    """
+    if not target_analysis or not pr_analysis:
+        return None
+
+    # Combine all components from both analyses
+    all_components = set(target_analysis.keys()) | set(pr_analysis.keys())
+
+    # Filter to components that have changed (ignoring noise)
+    changed_components: list[
+        tuple[str, int, int, int]
+    ] = []  # (comp, target_flash, pr_flash, delta)
+    for comp in all_components:
+        target_mem = target_analysis.get(comp, {})
+        pr_mem = pr_analysis.get(comp, {})
+
+        target_flash = target_mem.get("flash_total", 0)
+        pr_flash = pr_mem.get("flash_total", 0)
+
+        # Only include if component has meaningful change (above noise threshold)
+        delta = pr_flash - target_flash
+        if abs(delta) > COMPONENT_CHANGE_NOISE_THRESHOLD:
+            changed_components.append((comp, target_flash, pr_flash, delta))
+
+    if not changed_components:
+        return None
+
+    # Sort by absolute delta (largest changes first)
+    changed_components.sort(key=lambda x: abs(x[3]), reverse=True)
+
+    return changed_components
+
+
+def create_comment_body(
+    components: list[str],
+    platform: str,
+    target_ram: int,
+    target_flash: int,
+    pr_ram: int,
+    pr_flash: int,
+    target_analysis: dict | None = None,
+    pr_analysis: dict | None = None,
+    target_symbols: dict | None = None,
+    pr_symbols: dict | None = None,
+    target_cache_hit: bool = False,
+) -> str:
+    """Create the comment body with memory impact analysis using Jinja2 templates.
+
+    Args:
+        components: List of component names (merged config)
+        platform: Platform name
+        target_ram: RAM usage in target branch
+        target_flash: Flash usage in target branch
+        pr_ram: RAM usage in PR branch
+        pr_flash: Flash usage in PR branch
+        target_analysis: Optional component breakdown for target branch
+        pr_analysis: Optional component breakdown for PR branch
+        target_symbols: Optional symbol map for target branch
+        pr_symbols: Optional symbol map for PR branch
+        target_cache_hit: Whether target branch analysis was loaded from cache
+
+    Returns:
+        Formatted comment body
+    """
+    # Set up Jinja2 environment
+    env = Environment(
+        loader=FileSystemLoader(TEMPLATE_DIR),
+        trim_blocks=True,
+        lstrip_blocks=True,
+    )
+
+    # Register custom filters
+    env.filters["format_bytes"] = format_bytes
+    env.filters["format_change"] = format_change
+
+    # Prepare template context
+    context = {
+        "comment_marker": COMMENT_MARKER,
+        "platform": platform,
+        "target_ram": format_bytes(target_ram),
+        "pr_ram": format_bytes(pr_ram),
+        "target_flash": format_bytes(target_flash),
+        "pr_flash": format_bytes(pr_flash),
+        "ram_change": format_change(
+            target_ram, pr_ram, threshold=OVERALL_CHANGE_THRESHOLD
+        ),
+        "flash_change": format_change(
+            target_flash, pr_flash, threshold=OVERALL_CHANGE_THRESHOLD
+        ),
+        "target_cache_hit": target_cache_hit,
+        "component_change_threshold": COMPONENT_CHANGE_THRESHOLD,
+    }
+
+    # Format components list
+    if len(components) == 1:
+        context["components_str"] = f"`{components[0]}`"
+        context["config_note"] = "a representative test configuration"
+    else:
+        context["components_str"] = ", ".join(f"`{c}`" for c in sorted(components))
+        context["config_note"] = (
+            f"a merged configuration with {len(components)} components"
+        )
+
+    # Prepare component breakdown if available
+    component_breakdown = ""
+    if target_analysis and pr_analysis:
+        changed_components = prepare_component_breakdown_data(
+            target_analysis, pr_analysis
+        )
+        if changed_components:
+            template = env.get_template("ci_memory_impact_component_breakdown.j2")
+            component_breakdown = template.render(
+                changed_components=changed_components,
+                format_bytes=format_bytes,
+                format_change=format_change,
+                component_change_threshold=COMPONENT_CHANGE_THRESHOLD,
+                max_rows=MAX_COMPONENT_BREAKDOWN_ROWS,
+            )
+
+    # Prepare symbol changes if available
+    symbol_changes = ""
+    if target_symbols and pr_symbols:
+        symbol_data = prepare_symbol_changes_data(target_symbols, pr_symbols)
+        if symbol_data:
+            template = env.get_template("ci_memory_impact_symbol_changes.j2")
+            symbol_changes = template.render(
+                **symbol_data,
+                format_bytes=format_bytes,
+                format_change=format_change,
+                max_changed_rows=MAX_CHANGED_SYMBOLS_ROWS,
+                max_new_rows=MAX_NEW_SYMBOLS_ROWS,
+                max_removed_rows=MAX_REMOVED_SYMBOLS_ROWS,
+                symbol_max_length=SYMBOL_DISPLAY_MAX_LENGTH,
+                symbol_truncate_length=SYMBOL_DISPLAY_TRUNCATE_LENGTH,
+            )
+
+    if not target_analysis or not pr_analysis:
+        print("No ELF files provided, skipping detailed analysis", file=sys.stderr)
+
+    context["component_breakdown"] = component_breakdown
+    context["symbol_changes"] = symbol_changes
+
+    # Render main template
+    template = env.get_template("ci_memory_impact_comment_template.j2")
+    return template.render(**context)
+
+
+def find_existing_comment(pr_number: str) -> str | None:
+    """Find existing memory impact comment on the PR.
+
+    Args:
+        pr_number: PR number
+
+    Returns:
+        Comment numeric ID if found, None otherwise
+
+    Raises:
+        subprocess.CalledProcessError: If gh command fails
+    """
+    print(f"DEBUG: Looking for existing comment on PR #{pr_number}", file=sys.stderr)
+
+    # Use gh api to get comments directly - this returns the numeric id field
+    result = subprocess.run(
+        [
+            "gh",
+            "api",
+            f"/repos/{{owner}}/{{repo}}/issues/{pr_number}/comments",
+            "--jq",
+            ".[] | {id, body}",
+        ],
+        capture_output=True,
+        text=True,
+        check=True,
+    )
+
+    print(
+        f"DEBUG: gh api comments output (first 500 chars):\n{result.stdout[:500]}",
+        file=sys.stderr,
+    )
+
+    # Parse comments and look for our marker
+    comment_count = 0
+    for line in result.stdout.strip().split("\n"):
+        if not line:
+            continue
+
+        try:
+            comment = json.loads(line)
+            comment_count += 1
+            comment_id = comment.get("id")
+            print(
+                f"DEBUG: Checking comment {comment_count}: id={comment_id}",
+                file=sys.stderr,
+            )
+
+            body = comment.get("body", "")
+            if COMMENT_MARKER in body:
+                print(
+                    f"DEBUG: Found existing comment with id={comment_id}",
+                    file=sys.stderr,
+                )
+                # Return the numeric id
+                return str(comment_id)
+            print("DEBUG: Comment does not contain marker", file=sys.stderr)
+        except json.JSONDecodeError as e:
+            print(f"DEBUG: JSON decode error: {e}", file=sys.stderr)
+            continue
+
+    print(
+        f"DEBUG: No existing comment found (checked {comment_count} comments)",
+        file=sys.stderr,
+    )
+    return None
+
+
+def update_existing_comment(comment_id: str, comment_body: str) -> None:
+    """Update an existing comment.
+
+    Args:
+        comment_id: Comment ID to update
+        comment_body: New comment body text
+
+    Raises:
+        subprocess.CalledProcessError: If gh command fails
+    """
+    print(f"DEBUG: Updating existing comment {comment_id}", file=sys.stderr)
+    result = subprocess.run(
+        [
+            "gh",
+            "api",
+            f"/repos/{{owner}}/{{repo}}/issues/comments/{comment_id}",
+            "-X",
+            "PATCH",
+            "-f",
+            f"body={comment_body}",
+        ],
+        check=True,
+        capture_output=True,
+        text=True,
+    )
+    print(f"DEBUG: Update response: {result.stdout}", file=sys.stderr)
+
+
+def create_new_comment(pr_number: str, comment_body: str) -> None:
+    """Create a new PR comment.
+
+    Args:
+        pr_number: PR number
+        comment_body: Comment body text
+
+    Raises:
+        subprocess.CalledProcessError: If gh command fails
+    """
+    print(f"DEBUG: Posting new comment on PR #{pr_number}", file=sys.stderr)
+    result = subprocess.run(
+        ["gh", "pr", "comment", pr_number, "--body", comment_body],
+        check=True,
+        capture_output=True,
+        text=True,
+    )
+    print(f"DEBUG: Post response: {result.stdout}", file=sys.stderr)
+
+
+def post_or_update_comment(pr_number: str, comment_body: str) -> None:
+    """Post a new comment or update existing one.
+
+    Args:
+        pr_number: PR number
+        comment_body: Comment body text
+
+    Raises:
+        subprocess.CalledProcessError: If gh command fails
+    """
+    # Look for existing comment
+    existing_comment_id = find_existing_comment(pr_number)
+
+    if existing_comment_id and existing_comment_id != "None":
+        update_existing_comment(existing_comment_id, comment_body)
+    else:
+        create_new_comment(pr_number, comment_body)
+
+    print("Comment posted/updated successfully", file=sys.stderr)
+
+
+def main() -> int:
+    """Main entry point."""
+    parser = argparse.ArgumentParser(
+        description="Post or update PR comment with memory impact analysis"
+    )
+    parser.add_argument("--pr-number", required=True, help="PR number")
+    parser.add_argument(
+        "--components",
+        required=True,
+        help='JSON array of component names (e.g., \'["api", "wifi"]\')',
+    )
+    parser.add_argument("--platform", required=True, help="Platform name")
+    parser.add_argument(
+        "--target-ram", type=int, required=True, help="Target branch RAM usage"
+    )
+    parser.add_argument(
+        "--target-flash", type=int, required=True, help="Target branch flash usage"
+    )
+    parser.add_argument("--pr-ram", type=int, required=True, help="PR branch RAM usage")
+    parser.add_argument(
+        "--pr-flash", type=int, required=True, help="PR branch flash usage"
+    )
+    parser.add_argument(
+        "--target-json",
+        help="Optional path to target branch analysis JSON (for detailed analysis)",
+    )
+    parser.add_argument(
+        "--pr-json",
+        help="Optional path to PR branch analysis JSON (for detailed analysis)",
+    )
+    parser.add_argument(
+        "--target-cache-hit",
+        action="store_true",
+        help="Indicates that target branch analysis was loaded from cache",
+    )
+
+    args = parser.parse_args()
+
+    # Parse components from JSON
+    try:
+        components = json.loads(args.components)
+        if not isinstance(components, list):
+            print("Error: --components must be a JSON array", file=sys.stderr)
+            sys.exit(1)
+    except json.JSONDecodeError as e:
+        print(f"Error parsing --components JSON: {e}", file=sys.stderr)
+        sys.exit(1)
+
+    # Load analysis JSON files
+    target_analysis = None
+    pr_analysis = None
+    target_symbols = None
+    pr_symbols = None
+
+    if args.target_json:
+        target_data = load_analysis_json(args.target_json)
+        if target_data and target_data.get("detailed_analysis"):
+            target_analysis = target_data["detailed_analysis"].get("components")
+            target_symbols = target_data["detailed_analysis"].get("symbols")
+
+    if args.pr_json:
+        pr_data = load_analysis_json(args.pr_json)
+        if pr_data and pr_data.get("detailed_analysis"):
+            pr_analysis = pr_data["detailed_analysis"].get("components")
+            pr_symbols = pr_data["detailed_analysis"].get("symbols")
+
+    # Create comment body
+    # Note: Memory totals (RAM/Flash) are summed across all builds if multiple were run.
+    comment_body = create_comment_body(
+        components=components,
+        platform=args.platform,
+        target_ram=args.target_ram,
+        target_flash=args.target_flash,
+        pr_ram=args.pr_ram,
+        pr_flash=args.pr_flash,
+        target_analysis=target_analysis,
+        pr_analysis=pr_analysis,
+        target_symbols=target_symbols,
+        pr_symbols=pr_symbols,
+        target_cache_hit=args.target_cache_hit,
+    )
+
+    # Post or update comment
+    post_or_update_comment(args.pr_number, comment_body)
+
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

script/ci_memory_impact_extract.py

@@ -0,0 +1,281 @@
+#!/usr/bin/env python3
+"""Extract memory usage statistics from ESPHome build output.
+
+This script parses the PlatformIO build output to extract RAM and flash
+usage statistics for a compiled component. It's used by the CI workflow to
+compare memory usage between branches.
+
+The script reads compile output from stdin and looks for the standard
+PlatformIO output format:
+    RAM:   [====      ]  36.1% (used 29548 bytes from 81920 bytes)
+    Flash: [===       ]  34.0% (used 348511 bytes from 1023984 bytes)
+
+Optionally performs detailed memory analysis if a build directory is provided.
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+from pathlib import Path
+import re
+import sys
+
+# Add esphome to path
+sys.path.insert(0, str(Path(__file__).parent.parent))
+
+# pylint: disable=wrong-import-position
+from esphome.analyze_memory import MemoryAnalyzer
+from esphome.platformio_api import IDEData
+from script.ci_helpers import write_github_output
+
+# Regex patterns for extracting memory usage from PlatformIO output
+_RAM_PATTERN = re.compile(r"RAM:\s+\[.*?\]\s+\d+\.\d+%\s+\(used\s+(\d+)\s+bytes")
+_FLASH_PATTERN = re.compile(r"Flash:\s+\[.*?\]\s+\d+\.\d+%\s+\(used\s+(\d+)\s+bytes")
+_BUILD_PATH_PATTERN = re.compile(r"Build path: (.+)")
+
+
+def extract_from_compile_output(
+    output_text: str,
+) -> tuple[int | None, int | None, str | None]:
+    """Extract memory usage and build directory from PlatformIO compile output.
+
+    Supports multiple builds (for component groups or isolated components).
+    When test_build_components.py creates multiple builds, this sums the
+    memory usage across all builds.
+
+    Looks for lines like:
+        RAM:   [====      ]  36.1% (used 29548 bytes from 81920 bytes)
+        Flash: [===       ]  34.0% (used 348511 bytes from 1023984 bytes)
+
+    Also extracts build directory from lines like:
+        INFO Compiling app... Build path: /path/to/build
+
+    Args:
+        output_text: Compile output text (may contain multiple builds)
+
+    Returns:
+        Tuple of (total_ram_bytes, total_flash_bytes, build_dir) or (None, None, None) if not found
+    """
+    # Find all RAM and Flash matches (may be multiple builds)
+    ram_matches = _RAM_PATTERN.findall(output_text)
+    flash_matches = _FLASH_PATTERN.findall(output_text)
+
+    if not ram_matches or not flash_matches:
+        return None, None, None
+
+    # Sum all builds (handles multiple component groups)
+    total_ram = sum(int(match) for match in ram_matches)
+    total_flash = sum(int(match) for match in flash_matches)
+
+    # Extract build directory from ESPHome's explicit build path output
+    # Look for: INFO Compiling app... Build path: /path/to/build
+    # Note: Multiple builds reuse the same build path (each overwrites the previous)
+    build_dir = None
+    if match := _BUILD_PATH_PATTERN.search(output_text):
+        build_dir = match.group(1).strip()
+
+    return total_ram, total_flash, build_dir
+
+
+def run_detailed_analysis(build_dir: str) -> dict | None:
+    """Run detailed memory analysis on build directory.
+
+    Args:
+        build_dir: Path to ESPHome build directory
+
+    Returns:
+        Dictionary with analysis results or None if analysis fails
+    """
+    build_path = Path(build_dir)
+    if not build_path.exists():
+        print(f"Build directory not found: {build_dir}", file=sys.stderr)
+        return None
+
+    # Find firmware.elf
+    elf_path = None
+    for elf_candidate in [
+        build_path / "firmware.elf",
+        build_path / ".pioenvs" / build_path.name / "firmware.elf",
+    ]:
+        if elf_candidate.exists():
+            elf_path = str(elf_candidate)
+            break
+
+    if not elf_path:
+        print(f"firmware.elf not found in {build_dir}", file=sys.stderr)
+        return None
+
+    # Find idedata.json - check multiple locations
+    device_name = build_path.name
+    idedata_candidates = [
+        # In .pioenvs for test builds
+        build_path / ".pioenvs" / device_name / "idedata.json",
+        # In .esphome/idedata for regular builds
+        Path.home() / ".esphome" / "idedata" / f"{device_name}.json",
+        # Check parent directories for .esphome/idedata (for test_build_components)
+        build_path.parent.parent.parent / "idedata" / f"{device_name}.json",
+    ]
+
+    idedata = None
+    for idedata_path in idedata_candidates:
+        if not idedata_path.exists():
+            continue
+        try:
+            with open(idedata_path, encoding="utf-8") as f:
+                raw_data = json.load(f)
+            idedata = IDEData(raw_data)
+            print(f"Loaded idedata from: {idedata_path}", file=sys.stderr)
+            break
+        except (json.JSONDecodeError, OSError) as e:
+            print(
+                f"Warning: Failed to load idedata from {idedata_path}: {e}",
+                file=sys.stderr,
+            )
+
+    analyzer = MemoryAnalyzer(elf_path, idedata=idedata)
+    components = analyzer.analyze()
+
+    # Convert to JSON-serializable format
+    result = {
+        "components": {
+            name: {
+                "text": mem.text_size,
+                "rodata": mem.rodata_size,
+                "data": mem.data_size,
+                "bss": mem.bss_size,
+                "flash_total": mem.flash_total,
+                "ram_total": mem.ram_total,
+                "symbol_count": mem.symbol_count,
+            }
+            for name, mem in components.items()
+        },
+        "symbols": {},
+    }
+
+    # Build symbol map
+    for section in analyzer.sections.values():
+        for symbol_name, size, _ in section.symbols:
+            if size > 0:
+                demangled = analyzer._demangle_symbol(symbol_name)
+                result["symbols"][demangled] = size
+
+    return result
+
+
+def main() -> int:
+    """Main entry point."""
+    parser = argparse.ArgumentParser(
+        description="Extract memory usage from ESPHome build output"
+    )
+    parser.add_argument(
+        "--output-env",
+        action="store_true",
+        help="Output to GITHUB_OUTPUT environment file",
+    )
+    parser.add_argument(
+        "--build-dir",
+        help="Optional build directory for detailed memory analysis (overrides auto-detection)",
+    )
+    parser.add_argument(
+        "--output-json",
+        help="Optional path to save detailed analysis JSON",
+    )
+    parser.add_argument(
+        "--output-build-dir",
+        help="Optional path to write the detected build directory",
+    )
+
+    args = parser.parse_args()
+
+    # Read compile output from stdin
+    compile_output = sys.stdin.read()
+
+    # Extract memory usage and build directory
+    ram_bytes, flash_bytes, detected_build_dir = extract_from_compile_output(
+        compile_output
+    )
+
+    if ram_bytes is None or flash_bytes is None:
+        print("Failed to extract memory usage from compile output", file=sys.stderr)
+        print("Expected lines like:", file=sys.stderr)
+        print(
+            "  RAM:   [====      ]  36.1% (used 29548 bytes from 81920 bytes)",
+            file=sys.stderr,
+        )
+        print(
+            "  Flash: [===       ]  34.0% (used 348511 bytes from 1023984 bytes)",
+            file=sys.stderr,
+        )
+        return 1
+
+    # Count how many builds were found
+    num_builds = len(_RAM_PATTERN.findall(compile_output))
+
+    if num_builds > 1:
+        print(
+            f"Found {num_builds} builds - summing memory usage across all builds",
+            file=sys.stderr,
+        )
+        print(
+            "WARNING: Detailed analysis will only cover the last build",
+            file=sys.stderr,
+        )
+
+    print(f"Total RAM: {ram_bytes} bytes", file=sys.stderr)
+    print(f"Total Flash: {flash_bytes} bytes", file=sys.stderr)
+
+    # Determine which build directory to use (explicit arg overrides auto-detection)
+    build_dir = args.build_dir or detected_build_dir
+
+    if detected_build_dir:
+        print(f"Detected build directory: {detected_build_dir}", file=sys.stderr)
+        if num_builds > 1:
+            print(
+                f"  (using last of {num_builds} builds for detailed analysis)",
+                file=sys.stderr,
+            )
+
+    # Write build directory to file if requested
+    if args.output_build_dir and build_dir:
+        build_dir_path = Path(args.output_build_dir)
+        build_dir_path.parent.mkdir(parents=True, exist_ok=True)
+        build_dir_path.write_text(build_dir)
+        print(f"Wrote build directory to {args.output_build_dir}", file=sys.stderr)
+
+    # Run detailed analysis if build directory available
+    detailed_analysis = None
+    if build_dir:
+        print(f"Running detailed analysis on {build_dir}", file=sys.stderr)
+        detailed_analysis = run_detailed_analysis(build_dir)
+
+    # Save JSON output if requested
+    if args.output_json:
+        output_data = {
+            "ram_bytes": ram_bytes,
+            "flash_bytes": flash_bytes,
+            "detailed_analysis": detailed_analysis,
+        }
+
+        output_path = Path(args.output_json)
+        output_path.parent.mkdir(parents=True, exist_ok=True)
+        with open(output_path, "w", encoding="utf-8") as f:
+            json.dump(output_data, f, indent=2)
+        print(f"Saved analysis to {args.output_json}", file=sys.stderr)
+
+    if args.output_env:
+        # Output to GitHub Actions
+        write_github_output(
+            {
+                "ram_usage": ram_bytes,
+                "flash_usage": flash_bytes,
+            }
+        )
+    else:
+        print(f"{ram_bytes},{flash_bytes}")
+
+    return 0
+
+
+if __name__ == "__main__":
+    sys.exit(main())

script/determine-jobs.py

@@ -10,7 +10,13 @@ what files have changed. It outputs JSON with the following structure:
   "clang_format": true/false,
   "python_linters": true/false,
   "changed_components": ["component1", "component2", ...],
-  "component_test_count": 5
+  "component_test_count": 5,
+  "memory_impact": {
+    "should_run": "true/false",
+    "components": ["component1", "component2", ...],
+    "platform": "esp32-idf",
+    "use_merged_config": "true"
+  }
 }
 
 The CI workflow uses this information to:
@@ -20,6 +26,7 @@ The CI workflow uses this information to:
 - Skip or run Python linters (ruff, flake8, pylint, pyupgrade)
 - Determine which components to test individually
 - Decide how to split component tests (if there are many)
+- Run memory impact analysis whenever there are changed components (merged config), and also for core-only changes
 
 Usage:
   python script/determine-jobs.py [-b BRANCH]
@@ -31,6 +38,8 @@ Options:
 from __future__ import annotations
 
 import argparse
+from collections import Counter
+from enum import StrEnum
 from functools import cache
 import json
 import os
@@ -40,16 +49,47 @@ import sys
 from typing import Any
 
 from helpers import (
+    BASE_BUS_COMPONENTS,
     CPP_FILE_EXTENSIONS,
-    ESPHOME_COMPONENTS_PATH,
     PYTHON_FILE_EXTENSIONS,
     changed_files,
     get_all_dependencies,
+    get_component_from_path,
+    get_component_test_files,
     get_components_from_integration_fixtures,
+    parse_test_filename,
     root_path,
 )
 
 
+class Platform(StrEnum):
+    """Platform identifiers for memory impact analysis."""
+
+    ESP8266_ARD = "esp8266-ard"
+    ESP32_IDF = "esp32-idf"
+    ESP32_C3_IDF = "esp32-c3-idf"
+    ESP32_C6_IDF = "esp32-c6-idf"
+    ESP32_S2_IDF = "esp32-s2-idf"
+    ESP32_S3_IDF = "esp32-s3-idf"
+
+
+# Memory impact analysis constants
+MEMORY_IMPACT_FALLBACK_COMPONENT = "api"  # Representative component for core changes
+MEMORY_IMPACT_FALLBACK_PLATFORM = Platform.ESP32_IDF  # Most representative platform
+
+# Platform preference order for memory impact analysis
+# Prefer newer platforms first as they represent the future of ESPHome
+# ESP8266 is most constrained but many new features don't support it
+MEMORY_IMPACT_PLATFORM_PREFERENCE = [
+    Platform.ESP32_C6_IDF,  # ESP32-C6 IDF (newest, supports Thread/Zigbee)
+    Platform.ESP8266_ARD,  # ESP8266 Arduino (most memory constrained - best for impact analysis)
+    Platform.ESP32_IDF,  # ESP32 IDF platform (primary ESP32 platform, most representative)
+    Platform.ESP32_C3_IDF,  # ESP32-C3 IDF
+    Platform.ESP32_S2_IDF,  # ESP32-S2 IDF
+    Platform.ESP32_S3_IDF,  # ESP32-S3 IDF
+]
+
+
 def should_run_integration_tests(branch: str | None = None) -> bool:
     """Determine if integration tests should run based on changed files.
 
@@ -105,12 +145,9 @@ def should_run_integration_tests(branch: str | None = None) -> bool:
 
     # Check if any required components changed
     for file in files:
-        if file.startswith(ESPHOME_COMPONENTS_PATH):
-            parts = file.split("/")
-            if len(parts) >= 3:
-                component = parts[2]
-                if component in all_required_components:
-                    return True
+        component = get_component_from_path(file)
+        if component and component in all_required_components:
+            return True
 
     return False
 
@@ -224,10 +261,136 @@ def _component_has_tests(component: str) -> bool:
     Returns:
         True if the component has test YAML files
     """
-    tests_dir = Path(root_path) / "tests" / "components" / component
-    if not tests_dir.exists():
-        return False
-    return any(tests_dir.glob("test.*.yaml"))
+    return bool(get_component_test_files(component))
+
+
+def detect_memory_impact_config(
+    branch: str | None = None,
+) -> dict[str, Any]:
+    """Determine memory impact analysis configuration.
+
+    Always runs memory impact analysis when there are changed components,
+    building a merged configuration with all changed components (like
+    test_build_components.py does) to get comprehensive memory analysis.
+
+    Args:
+        branch: Branch to compare against
+
+    Returns:
+        Dictionary with memory impact analysis parameters:
+        - should_run: "true" or "false"
+        - components: list of component names to analyze
+        - platform: platform name for the merged build
+        - use_merged_config: "true" (always use merged config)
+    """
+
+    # Get actually changed files (not dependencies)
+    files = changed_files(branch)
+
+    # Find all changed components (excluding core and base bus components)
+    changed_component_set: set[str] = set()
+    has_core_changes = False
+
+    for file in files:
+        component = get_component_from_path(file)
+        if component:
+            # Skip base bus components as they're used across many builds
+            if component not in BASE_BUS_COMPONENTS:
+                changed_component_set.add(component)
+        elif file.startswith("esphome/"):
+            # Core ESPHome files changed (not component-specific)
+            has_core_changes = True
+
+    # If no components changed but core changed, test representative component
+    force_fallback_platform = False
+    if not changed_component_set and has_core_changes:
+        print(
+            f"Memory impact: No components changed, but core files changed. "
+            f"Testing {MEMORY_IMPACT_FALLBACK_COMPONENT} component on {MEMORY_IMPACT_FALLBACK_PLATFORM}.",
+            file=sys.stderr,
+        )
+        changed_component_set.add(MEMORY_IMPACT_FALLBACK_COMPONENT)
+        force_fallback_platform = True  # Use fallback platform (most representative)
+    elif not changed_component_set:
+        # No components and no core changes
+        return {"should_run": "false"}
+
+    # Find components that have tests and collect their supported platforms
+    components_with_tests: list[str] = []
+    component_platforms_map: dict[
+        str, set[Platform]
+    ] = {}  # Track which platforms each component supports
+
+    for component in sorted(changed_component_set):
+        # Look for test files on preferred platforms
+        test_files = get_component_test_files(component)
+        if not test_files:
+            continue
+
+        # Check if component has tests for any preferred platform
+        available_platforms = [
+            platform
+            for test_file in test_files
+            if (platform := parse_test_filename(test_file)[1]) != "all"
+            and platform in MEMORY_IMPACT_PLATFORM_PREFERENCE
+        ]
+
+        if not available_platforms:
+            continue
+
+        component_platforms_map[component] = set(available_platforms)
+        components_with_tests.append(component)
+
+    # If no components have tests, don't run memory impact
+    if not components_with_tests:
+        return {"should_run": "false"}
+
+    # Find common platforms supported by ALL components
+    # This ensures we can build all components together in a merged config
+    common_platforms = set(MEMORY_IMPACT_PLATFORM_PREFERENCE)
+    for component, platforms in component_platforms_map.items():
+        common_platforms &= platforms
+
+    # Select the most preferred platform from the common set
+    # Exception: for core changes, use fallback platform (most representative of codebase)
+    if force_fallback_platform:
+        platform = MEMORY_IMPACT_FALLBACK_PLATFORM
+    elif common_platforms:
+        # Pick the most preferred platform that all components support
+        platform = min(common_platforms, key=MEMORY_IMPACT_PLATFORM_PREFERENCE.index)
+    else:
+        # No common platform - pick the most commonly supported platform
+        # This allows testing components individually even if they can't be merged
+        # Count how many components support each platform
+        platform_counts = Counter(
+            p for platforms in component_platforms_map.values() for p in platforms
+        )
+        # Pick the platform supported by most components, preferring earlier in MEMORY_IMPACT_PLATFORM_PREFERENCE
+        platform = max(
+            platform_counts.keys(),
+            key=lambda p: (
+                platform_counts[p],
+                -MEMORY_IMPACT_PLATFORM_PREFERENCE.index(p),
+            ),
+        )
+
+    # Debug output
+    print("Memory impact analysis:", file=sys.stderr)
+    print(f"  Changed components: {sorted(changed_component_set)}", file=sys.stderr)
+    print(f"  Components with tests: {components_with_tests}", file=sys.stderr)
+    print(
+        f"  Component platforms: {dict(sorted(component_platforms_map.items()))}",
+        file=sys.stderr,
+    )
+    print(f"  Common platforms: {sorted(common_platforms)}", file=sys.stderr)
+    print(f"  Selected platform: {platform}", file=sys.stderr)
+
+    return {
+        "should_run": "true",
+        "components": components_with_tests,
+        "platform": platform,
+        "use_merged_config": "true",
+    }
 
 
 def main() -> None:
@@ -279,6 +442,9 @@ def main() -> None:
         if component not in directly_changed_components
     ]
 
+    # Detect components for memory impact analysis (merged config)
+    memory_impact = detect_memory_impact_config(args.branch)
+
     # Build output
     output: dict[str, Any] = {
         "integration_tests": run_integration,
@@ -292,6 +458,7 @@ def main() -> None:
         "component_test_count": len(changed_components_with_tests),
         "directly_changed_count": len(directly_changed_with_tests),
         "dependency_only_count": len(dependency_only_components),
+        "memory_impact": memory_impact,
     }
 
     # Output as JSON

script/helpers.py

@@ -29,6 +29,18 @@ YAML_FILE_EXTENSIONS = (".yaml", ".yml")
 # Component path prefix
 ESPHOME_COMPONENTS_PATH = "esphome/components/"
 
+# Base bus components - these ARE the bus implementations and should not
+# be flagged as needing migration since they are the platform/base components
+BASE_BUS_COMPONENTS = {
+    "i2c",
+    "spi",
+    "uart",
+    "modbus",
+    "canbus",
+    "remote_transmitter",
+    "remote_receiver",
+}
+
 
 def parse_list_components_output(output: str) -> list[str]:
     """Parse the output from list-components.py script.
@@ -46,6 +58,65 @@ def parse_list_components_output(output: str) -> list[str]:
     return [c.strip() for c in output.strip().split("\n") if c.strip()]
 
 
+def parse_test_filename(test_file: Path) -> tuple[str, str]:
+    """Parse test filename to extract test name and platform.
+
+    Test files follow the naming pattern: test.<platform>.yaml or test-<variant>.<platform>.yaml
+
+    Args:
+        test_file: Path to test file
+
+    Returns:
+        Tuple of (test_name, platform)
+    """
+    parts = test_file.stem.split(".")
+    if len(parts) == 2:
+        return parts[0], parts[1]  # test, platform
+    return parts[0], "all"
+
+
+def get_component_from_path(file_path: str) -> str | None:
+    """Extract component name from a file path.
+
+    Args:
+        file_path: Path to a file (e.g., "esphome/components/wifi/wifi.cpp")
+
+    Returns:
+        Component name if path is in components directory, None otherwise
+    """
+    if not file_path.startswith(ESPHOME_COMPONENTS_PATH):
+        return None
+    parts = file_path.split("/")
+    if len(parts) >= 3:
+        return parts[2]
+    return None
+
+
+def get_component_test_files(
+    component: str, *, all_variants: bool = False
+) -> list[Path]:
+    """Get test files for a component.
+
+    Args:
+        component: Component name (e.g., "wifi")
+        all_variants: If True, returns all test files including variants (test-*.yaml).
+                     If False, returns only base test files (test.*.yaml).
+                     Default is False.
+
+    Returns:
+        List of test file paths for the component, or empty list if none exist
+    """
+    tests_dir = Path(root_path) / "tests" / "components" / component
+    if not tests_dir.exists():
+        return []
+
+    if all_variants:
+        # Match both test.*.yaml and test-*.yaml patterns
+        return list(tests_dir.glob("test[.-]*.yaml"))
+    # Match only test.*.yaml (base tests)
+    return list(tests_dir.glob("test.*.yaml"))
+
+
 def styled(color: str | tuple[str, ...], msg: str, reset: bool = True) -> str:
     prefix = "".join(color) if isinstance(color, tuple) else color
     suffix = colorama.Style.RESET_ALL if reset else ""
@@ -314,11 +385,9 @@ def _filter_changed_ci(files: list[str]) -> list[str]:
     # because changes in one file can affect other files in the same component.
     filtered_files = []
     for f in files:
-        if f.startswith(ESPHOME_COMPONENTS_PATH):
-            # Check if file belongs to any of the changed components
-            parts = f.split("/")
-            if len(parts) >= 3 and parts[2] in component_set:
-                filtered_files.append(f)
+        component = get_component_from_path(f)
+        if component and component in component_set:
+            filtered_files.append(f)
 
     return filtered_files
 

script/list-components.py

@@ -4,7 +4,7 @@ from collections.abc import Callable
 from pathlib import Path
 import sys
 
-from helpers import changed_files, git_ls_files
+from helpers import changed_files, get_component_from_path, git_ls_files
 
 from esphome.const import (
     KEY_CORE,
@@ -30,11 +30,9 @@ def get_all_component_files() -> list[str]:
 def extract_component_names_array_from_files_array(files):
     components = []
     for file in files:
-        file_parts = file.split("/")
-        if len(file_parts) >= 4:
-            component_name = file_parts[2]
-            if component_name not in components:
-                components.append(component_name)
+        component_name = get_component_from_path(file)
+        if component_name and component_name not in components:
+            components.append(component_name)
     return components
 
 

script/split_components_for_ci.py

@@ -28,6 +28,7 @@ from script.analyze_component_buses import (
     create_grouping_signature,
     merge_compatible_bus_groups,
 )
+from script.helpers import get_component_test_files
 
 # Weighting for batch creation
 # Isolated components can't be grouped/merged, so they count as 10x
@@ -45,17 +46,12 @@ def has_test_files(component_name: str, tests_dir: Path) -> bool:
 
     Args:
         component_name: Name of the component
-        tests_dir: Path to tests/components directory
+        tests_dir: Path to tests/components directory (unused, kept for compatibility)
 
     Returns:
         True if the component has test.*.yaml files
     """
-    component_dir = tests_dir / component_name
-    if not component_dir.exists() or not component_dir.is_dir():
-        return False
-
-    # Check for test.*.yaml files
-    return any(component_dir.glob("test.*.yaml"))
+    return bool(get_component_test_files(component_name))
 
 
 def create_intelligent_batches(

script/templates/ci_memory_impact_comment_template.j2

@@ -0,0 +1,27 @@
+{{ comment_marker }}
+## Memory Impact Analysis
+
+**Components:** {{ components_str }}
+**Platform:** `{{ platform }}`
+
+| Metric | Target Branch | This PR | Change |
+|--------|--------------|---------|--------|
+| **RAM** | {{ target_ram }} | {{ pr_ram }} | {{ ram_change }} |
+| **Flash** | {{ target_flash }} | {{ pr_flash }} | {{ flash_change }} |
+{% if component_breakdown %}
+{{ component_breakdown }}
+{% endif %}
+{% if symbol_changes %}
+{{ symbol_changes }}
+{% endif %}
+{%- if target_cache_hit %}
+
+> ⚡ Target branch analysis was loaded from cache (build skipped for faster CI).
+{%- endif %}
+
+---
+> **Note:** This analysis measures **static RAM and Flash usage** only (compile-time allocation).
+> **Dynamic memory (heap)** cannot be measured automatically.
+> **⚠️ You must test this PR on a real device** to measure free heap and ensure no runtime memory issues.
+
+*This analysis runs automatically when components change. Memory usage is measured from {{ config_note }}.*

script/templates/ci_memory_impact_component_breakdown.j2

@@ -0,0 +1,15 @@
+
+<details open>
+<summary>📊 Component Memory Breakdown</summary>
+
+| Component | Target Flash | PR Flash | Change |
+|-----------|--------------|----------|--------|
+{% for comp, target_flash, pr_flash, delta in changed_components[:max_rows] -%}
+{% set threshold = component_change_threshold if comp.startswith("[esphome]") else none -%}
+| `{{ comp }}` | {{ target_flash|format_bytes }} | {{ pr_flash|format_bytes }} | {{ format_change(target_flash, pr_flash, threshold=threshold) }} |
+{% endfor -%}
+{% if changed_components|length > max_rows -%}
+| ... | ... | ... | *({{ changed_components|length - max_rows }} more components not shown)* |
+{% endif -%}
+
+</details>

script/templates/ci_memory_impact_macros.j2

@@ -0,0 +1,8 @@
+{#- Macro for formatting symbol names in tables -#}
+{%- macro format_symbol(symbol, max_length, truncate_length) -%}
+{%- if symbol|length <= max_length -%}
+`{{ symbol }}`
+{%- else -%}
+<details><summary><code>{{ symbol[:truncate_length] }}...</code></summary><code>{{ symbol }}</code></details>
+{%- endif -%}
+{%- endmacro -%}

script/templates/ci_memory_impact_symbol_changes.j2

@@ -0,0 +1,51 @@
+{%- from 'ci_memory_impact_macros.j2' import format_symbol -%}
+
+<details>
+<summary>🔍 Symbol-Level Changes (click to expand)</summary>
+
+{% if changed_symbols %}
+
+### Changed Symbols
+
+| Symbol | Target Size | PR Size | Change |
+|--------|-------------|---------|--------|
+{% for symbol, target_size, pr_size, delta in changed_symbols[:max_changed_rows] -%}
+| {{ format_symbol(symbol, symbol_max_length, symbol_truncate_length) }} | {{ target_size|format_bytes }} | {{ pr_size|format_bytes }} | {{ format_change(target_size, pr_size) }} |
+{% endfor -%}
+{% if changed_symbols|length > max_changed_rows -%}
+| ... | ... | ... | *({{ changed_symbols|length - max_changed_rows }} more changed symbols not shown)* |
+{% endif -%}
+
+{% endif %}
+{% if new_symbols %}
+
+### New Symbols (top {{ max_new_rows }})
+
+| Symbol | Size |
+|--------|------|
+{% for symbol, size in new_symbols[:max_new_rows] -%}
+| {{ format_symbol(symbol, symbol_max_length, symbol_truncate_length) }} | {{ size|format_bytes }} |
+{% endfor -%}
+{% if new_symbols|length > max_new_rows -%}
+{% set total_new_size = new_symbols|sum(attribute=1) -%}
+| *{{ new_symbols|length - max_new_rows }} more new symbols...* | *Total: {{ total_new_size|format_bytes }}* |
+{% endif -%}
+
+{% endif %}
+{% if removed_symbols %}
+
+### Removed Symbols (top {{ max_removed_rows }})
+
+| Symbol | Size |
+|--------|------|
+{% for symbol, size in removed_symbols[:max_removed_rows] -%}
+| {{ format_symbol(symbol, symbol_max_length, symbol_truncate_length) }} | {{ size|format_bytes }} |
+{% endfor -%}
+{% if removed_symbols|length > max_removed_rows -%}
+{% set total_removed_size = removed_symbols|sum(attribute=1) -%}
+| *{{ removed_symbols|length - max_removed_rows }} more removed symbols...* | *Total: {{ total_removed_size|format_bytes }}* |
+{% endif -%}
+
+{% endif %}
+
+</details>

script/test_build_components.py

@@ -39,6 +39,7 @@ from script.analyze_component_buses import (
     merge_compatible_bus_groups,
     uses_local_file_references,
 )
+from script.helpers import get_component_test_files
 from script.merge_component_configs import merge_component_configs
 
 
@@ -82,13 +83,14 @@ def show_disk_space_if_ci(esphome_command: str) -> None:
 
 
 def find_component_tests(
-    components_dir: Path, component_pattern: str = "*"
+    components_dir: Path, component_pattern: str = "*", base_only: bool = False
 ) -> dict[str, list[Path]]:
     """Find all component test files.
 
     Args:
         components_dir: Path to tests/components directory
         component_pattern: Glob pattern for component names
+        base_only: If True, only find base test files (test.*.yaml), not variant files (test-*.yaml)
 
     Returns:
         Dictionary mapping component name to list of test files
@@ -99,9 +101,10 @@ def find_component_tests(
         if not comp_dir.is_dir():
             continue
 
-        # Find test files matching test.*.yaml or test-*.yaml patterns
-        for test_file in comp_dir.glob("test[.-]*.yaml"):
-            component_tests[comp_dir.name].append(test_file)
+        # Get test files using helper function
+        test_files = get_component_test_files(comp_dir.name, all_variants=not base_only)
+        if test_files:
+            component_tests[comp_dir.name] = test_files
 
     return dict(component_tests)
 
@@ -931,6 +934,7 @@ def test_components(
     continue_on_fail: bool,
     enable_grouping: bool = True,
     isolated_components: set[str] | None = None,
+    base_only: bool = False,
 ) -> int:
     """Test components with optional intelligent grouping.
 
@@ -944,6 +948,7 @@ def test_components(
             These are tested WITHOUT --testing-mode to enable full validation
             (pin conflicts, etc). This is used in CI for directly changed components
             to catch issues that would be missed with --testing-mode.
+        base_only: If True, only test base test files (test.*.yaml), not variant files (test-*.yaml)
 
     Returns:
         Exit code (0 for success, 1 for failure)
@@ -961,7 +966,7 @@ def test_components(
     # Find all component tests
     all_tests = {}
     for pattern in component_patterns:
-        all_tests.update(find_component_tests(tests_dir, pattern))
+        all_tests.update(find_component_tests(tests_dir, pattern, base_only))
 
     if not all_tests:
         print(f"No components found matching: {component_patterns}")
@@ -1122,6 +1127,11 @@ def main() -> int:
         "These are tested WITHOUT --testing-mode to enable full validation. "
         "Used in CI for directly changed components to catch pin conflicts and other issues.",
     )
+    parser.add_argument(
+        "--base-only",
+        action="store_true",
+        help="Only test base test files (test.*.yaml), not variant files (test-*.yaml)",
+    )
 
     args = parser.parse_args()
 
@@ -1140,6 +1150,7 @@ def main() -> int:
         continue_on_fail=args.continue_on_fail,
         enable_grouping=not args.no_grouping,
         isolated_components=isolated_components,
+        base_only=args.base_only,
     )
 
 

tests/components/thermostat/common.yaml

@@ -69,6 +69,11 @@ climate:
       - logger.log: swing_vertical_action
     swing_both_action:
       - logger.log: swing_both_action
+    humidity_control_humidify_action:
+      - logger.log: humidity_control_humidify_action
+    humidity_control_off_action:
+      - logger.log: humidity_control_off_action
+    humidity_hysteresis: 1.0
     startup_delay: true
     supplemental_cooling_delta: 2.0
     cool_deadband: 0.5

tests/script/test_determine_jobs.py

@@ -17,6 +17,9 @@ script_dir = os.path.abspath(
 )
 sys.path.insert(0, script_dir)
 
+# Import helpers module for patching
+import helpers  # noqa: E402
+
 spec = importlib.util.spec_from_file_location(
     "determine_jobs", os.path.join(script_dir, "determine-jobs.py")
 )
@@ -59,15 +62,29 @@ def mock_subprocess_run() -> Generator[Mock, None, None]:
         yield mock
 
 
+@pytest.fixture
+def mock_changed_files() -> Generator[Mock, None, None]:
+    """Mock changed_files for memory impact detection."""
+    with patch.object(determine_jobs, "changed_files") as mock:
+        # Default to empty list
+        mock.return_value = []
+        yield mock
+
+
 def test_main_all_tests_should_run(
     mock_should_run_integration_tests: Mock,
     mock_should_run_clang_tidy: Mock,
     mock_should_run_clang_format: Mock,
     mock_should_run_python_linters: Mock,
     mock_subprocess_run: Mock,
+    mock_changed_files: Mock,
     capsys: pytest.CaptureFixture[str],
+    monkeypatch: pytest.MonkeyPatch,
 ) -> None:
     """Test when all tests should run."""
+    # Ensure we're not in GITHUB_ACTIONS mode for this test
+    monkeypatch.delenv("GITHUB_ACTIONS", raising=False)
+
     mock_should_run_integration_tests.return_value = True
     mock_should_run_clang_tidy.return_value = True
     mock_should_run_clang_format.return_value = True
@@ -100,6 +117,9 @@ def test_main_all_tests_should_run(
     assert output["component_test_count"] == len(
         output["changed_components_with_tests"]
     )
+    # memory_impact should be present
+    assert "memory_impact" in output
+    assert output["memory_impact"]["should_run"] == "false"  # No files changed
 
 
 def test_main_no_tests_should_run(
@@ -108,9 +128,14 @@ def test_main_no_tests_should_run(
     mock_should_run_clang_format: Mock,
     mock_should_run_python_linters: Mock,
     mock_subprocess_run: Mock,
+    mock_changed_files: Mock,
     capsys: pytest.CaptureFixture[str],
+    monkeypatch: pytest.MonkeyPatch,
 ) -> None:
     """Test when no tests should run."""
+    # Ensure we're not in GITHUB_ACTIONS mode for this test
+    monkeypatch.delenv("GITHUB_ACTIONS", raising=False)
+
     mock_should_run_integration_tests.return_value = False
     mock_should_run_clang_tidy.return_value = False
     mock_should_run_clang_format.return_value = False
@@ -136,6 +161,9 @@ def test_main_no_tests_should_run(
     assert output["changed_components"] == []
     assert output["changed_components_with_tests"] == []
     assert output["component_test_count"] == 0
+    # memory_impact should be present
+    assert "memory_impact" in output
+    assert output["memory_impact"]["should_run"] == "false"
 
 
 def test_main_list_components_fails(
@@ -169,9 +197,14 @@ def test_main_with_branch_argument(
     mock_should_run_clang_format: Mock,
     mock_should_run_python_linters: Mock,
     mock_subprocess_run: Mock,
+    mock_changed_files: Mock,
     capsys: pytest.CaptureFixture[str],
+    monkeypatch: pytest.MonkeyPatch,
 ) -> None:
     """Test with branch argument."""
+    # Ensure we're not in GITHUB_ACTIONS mode for this test
+    monkeypatch.delenv("GITHUB_ACTIONS", raising=False)
+
     mock_should_run_integration_tests.return_value = False
     mock_should_run_clang_tidy.return_value = True
     mock_should_run_clang_format.return_value = False
@@ -216,6 +249,9 @@ def test_main_with_branch_argument(
     assert output["component_test_count"] == len(
         output["changed_components_with_tests"]
     )
+    # memory_impact should be present
+    assert "memory_impact" in output
+    assert output["memory_impact"]["should_run"] == "false"
 
 
 def test_should_run_integration_tests(
@@ -403,10 +439,15 @@ def test_main_filters_components_without_tests(
     mock_should_run_clang_format: Mock,
     mock_should_run_python_linters: Mock,
     mock_subprocess_run: Mock,
+    mock_changed_files: Mock,
     capsys: pytest.CaptureFixture[str],
     tmp_path: Path,
+    monkeypatch: pytest.MonkeyPatch,
 ) -> None:
     """Test that components without test files are filtered out."""
+    # Ensure we're not in GITHUB_ACTIONS mode for this test
+    monkeypatch.delenv("GITHUB_ACTIONS", raising=False)
+
     mock_should_run_integration_tests.return_value = False
     mock_should_run_clang_tidy.return_value = False
     mock_should_run_clang_format.return_value = False
@@ -440,9 +481,10 @@ def test_main_filters_components_without_tests(
     airthings_dir = tests_dir / "airthings_ble"
     airthings_dir.mkdir(parents=True)
 
-    # Mock root_path to use tmp_path
+    # Mock root_path to use tmp_path (need to patch both determine_jobs and helpers)
     with (
         patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
         patch("sys.argv", ["determine-jobs.py"]),
     ):
         # Clear the cache since we're mocking root_path
@@ -459,3 +501,188 @@ def test_main_filters_components_without_tests(
     assert set(output["changed_components_with_tests"]) == {"wifi", "sensor"}
     # component_test_count should be based on components with tests
     assert output["component_test_count"] == 2
+    # memory_impact should be present
+    assert "memory_impact" in output
+    assert output["memory_impact"]["should_run"] == "false"
+
+
+# Tests for detect_memory_impact_config function
+
+
+def test_detect_memory_impact_config_with_common_platform(tmp_path: Path) -> None:
+    """Test memory impact detection when components share a common platform."""
+    # Create test directory structure
+    tests_dir = tmp_path / "tests" / "components"
+
+    # wifi component with esp32-idf test
+    wifi_dir = tests_dir / "wifi"
+    wifi_dir.mkdir(parents=True)
+    (wifi_dir / "test.esp32-idf.yaml").write_text("test: wifi")
+
+    # api component with esp32-idf test
+    api_dir = tests_dir / "api"
+    api_dir.mkdir(parents=True)
+    (api_dir / "test.esp32-idf.yaml").write_text("test: api")
+
+    # Mock changed_files to return wifi and api component changes
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = [
+            "esphome/components/wifi/wifi.cpp",
+            "esphome/components/api/api.cpp",
+        ]
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    assert result["should_run"] == "true"
+    assert set(result["components"]) == {"wifi", "api"}
+    assert result["platform"] == "esp32-idf"  # Common platform
+    assert result["use_merged_config"] == "true"
+
+
+def test_detect_memory_impact_config_core_only_changes(tmp_path: Path) -> None:
+    """Test memory impact detection with core-only changes (no component changes)."""
+    # Create test directory structure with fallback component
+    tests_dir = tmp_path / "tests" / "components"
+
+    # api component (fallback component) with esp32-idf test
+    api_dir = tests_dir / "api"
+    api_dir.mkdir(parents=True)
+    (api_dir / "test.esp32-idf.yaml").write_text("test: api")
+
+    # Mock changed_files to return only core files (no component files)
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = [
+            "esphome/core/application.cpp",
+            "esphome/core/component.h",
+        ]
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    assert result["should_run"] == "true"
+    assert result["components"] == ["api"]  # Fallback component
+    assert result["platform"] == "esp32-idf"  # Fallback platform
+    assert result["use_merged_config"] == "true"
+
+
+def test_detect_memory_impact_config_no_common_platform(tmp_path: Path) -> None:
+    """Test memory impact detection when components have no common platform."""
+    # Create test directory structure
+    tests_dir = tmp_path / "tests" / "components"
+
+    # wifi component only has esp32-idf test
+    wifi_dir = tests_dir / "wifi"
+    wifi_dir.mkdir(parents=True)
+    (wifi_dir / "test.esp32-idf.yaml").write_text("test: wifi")
+
+    # logger component only has esp8266-ard test
+    logger_dir = tests_dir / "logger"
+    logger_dir.mkdir(parents=True)
+    (logger_dir / "test.esp8266-ard.yaml").write_text("test: logger")
+
+    # Mock changed_files to return both components
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = [
+            "esphome/components/wifi/wifi.cpp",
+            "esphome/components/logger/logger.cpp",
+        ]
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    # Should pick the most frequently supported platform
+    assert result["should_run"] == "true"
+    assert set(result["components"]) == {"wifi", "logger"}
+    # When no common platform, picks most commonly supported
+    # esp8266-ard is preferred over esp32-idf in the preference list
+    assert result["platform"] in ["esp32-idf", "esp8266-ard"]
+    assert result["use_merged_config"] == "true"
+
+
+def test_detect_memory_impact_config_no_changes(tmp_path: Path) -> None:
+    """Test memory impact detection when no files changed."""
+    # Mock changed_files to return empty list
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = []
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    assert result["should_run"] == "false"
+
+
+def test_detect_memory_impact_config_no_components_with_tests(tmp_path: Path) -> None:
+    """Test memory impact detection when changed components have no tests."""
+    # Create test directory structure
+    tests_dir = tmp_path / "tests" / "components"
+
+    # Create component directory but no test files
+    custom_component_dir = tests_dir / "my_custom_component"
+    custom_component_dir.mkdir(parents=True)
+
+    # Mock changed_files to return component without tests
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = [
+            "esphome/components/my_custom_component/component.cpp",
+        ]
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    assert result["should_run"] == "false"
+
+
+def test_detect_memory_impact_config_skips_base_bus_components(tmp_path: Path) -> None:
+    """Test that base bus components (i2c, spi, uart) are skipped."""
+    # Create test directory structure
+    tests_dir = tmp_path / "tests" / "components"
+
+    # i2c component (should be skipped as it's a base bus component)
+    i2c_dir = tests_dir / "i2c"
+    i2c_dir.mkdir(parents=True)
+    (i2c_dir / "test.esp32-idf.yaml").write_text("test: i2c")
+
+    # wifi component (should not be skipped)
+    wifi_dir = tests_dir / "wifi"
+    wifi_dir.mkdir(parents=True)
+    (wifi_dir / "test.esp32-idf.yaml").write_text("test: wifi")
+
+    # Mock changed_files to return both i2c and wifi
+    with (
+        patch.object(determine_jobs, "root_path", str(tmp_path)),
+        patch.object(helpers, "root_path", str(tmp_path)),
+        patch.object(determine_jobs, "changed_files") as mock_changed_files,
+    ):
+        mock_changed_files.return_value = [
+            "esphome/components/i2c/i2c.cpp",
+            "esphome/components/wifi/wifi.cpp",
+        ]
+        determine_jobs._component_has_tests.cache_clear()
+
+        result = determine_jobs.detect_memory_impact_config()
+
+    # Should only include wifi, not i2c
+    assert result["should_run"] == "true"
+    assert result["components"] == ["wifi"]
+    assert "i2c" not in result["components"]

tests/unit_tests/test_platformio_api.py

@@ -387,6 +387,42 @@ def test_idedata_addr2line_path_unix(setup_core: Path) -> None:
     assert result == "/usr/bin/addr2line"
 
 
+def test_idedata_objdump_path_windows(setup_core: Path) -> None:
+    """Test IDEData.objdump_path on Windows."""
+    raw_data = {"prog_path": "/path/to/firmware.elf", "cc_path": "C:\\tools\\gcc.exe"}
+    idedata = platformio_api.IDEData(raw_data)
+
+    result = idedata.objdump_path
+    assert result == "C:\\tools\\objdump.exe"
+
+
+def test_idedata_objdump_path_unix(setup_core: Path) -> None:
+    """Test IDEData.objdump_path on Unix."""
+    raw_data = {"prog_path": "/path/to/firmware.elf", "cc_path": "/usr/bin/gcc"}
+    idedata = platformio_api.IDEData(raw_data)
+
+    result = idedata.objdump_path
+    assert result == "/usr/bin/objdump"
+
+
+def test_idedata_readelf_path_windows(setup_core: Path) -> None:
+    """Test IDEData.readelf_path on Windows."""
+    raw_data = {"prog_path": "/path/to/firmware.elf", "cc_path": "C:\\tools\\gcc.exe"}
+    idedata = platformio_api.IDEData(raw_data)
+
+    result = idedata.readelf_path
+    assert result == "C:\\tools\\readelf.exe"
+
+
+def test_idedata_readelf_path_unix(setup_core: Path) -> None:
+    """Test IDEData.readelf_path on Unix."""
+    raw_data = {"prog_path": "/path/to/firmware.elf", "cc_path": "/usr/bin/gcc"}
+    idedata = platformio_api.IDEData(raw_data)
+
+    result = idedata.readelf_path
+    assert result == "/usr/bin/readelf"
+
+
 def test_patch_structhash(setup_core: Path) -> None:
     """Test patch_structhash monkey patches platformio functions."""
     # Create simple namespace objects to act as modules