Merge pull request #4992 from esphome/bump-2023.6.1

2023.6.1

.devcontainer/devcontainer.json

@@ -4,53 +4,61 @@
   "postCreateCommand": [
     "script/devcontainer-post-create"
   ],
+  "containerEnv": {
+    "DEVCONTAINER": "1"
+  },
   "runArgs": [
     "--privileged",
     "-e",
     "ESPHOME_DASHBOARD_USE_PING=1"
   ],
   "appPort": 6052,
-  "extensions": [
+  "customizations": {
-    // python
+    "vscode": {
-    "ms-python.python",
+      "extensions": [
-    "visualstudioexptteam.vscodeintellicode",
+        // python
-    // yaml
+        "ms-python.python",
-    "redhat.vscode-yaml",
+        "visualstudioexptteam.vscodeintellicode",
-    // cpp
+        // yaml
-    "ms-vscode.cpptools",
+        "redhat.vscode-yaml",
-    // editorconfig
+        // cpp
-    "editorconfig.editorconfig",
+        "ms-vscode.cpptools",
-  ],
+        // editorconfig
-  "settings": {
+        "editorconfig.editorconfig",
-    "python.languageServer": "Pylance",
+      ],
-    "python.pythonPath": "/usr/bin/python3",
+      "settings": {
-    "python.linting.pylintEnabled": true,
+        "python.languageServer": "Pylance",
-    "python.linting.enabled": true,
+        "python.pythonPath": "/usr/bin/python3",
-    "python.formatting.provider": "black",
+        "python.linting.pylintEnabled": true,
-    "editor.formatOnPaste": false,
+        "python.linting.enabled": true,
-    "editor.formatOnSave": true,
+        "python.formatting.provider": "black",
-    "editor.formatOnType": true,
+        "editor.formatOnPaste": false,
-    "files.trimTrailingWhitespace": true,
+        "editor.formatOnSave": true,
-    "terminal.integrated.defaultProfile.linux": "bash",
+        "editor.formatOnType": true,
-    "yaml.customTags": [
+        "files.trimTrailingWhitespace": true,
-      "!secret scalar",
+        "terminal.integrated.defaultProfile.linux": "bash",
-      "!lambda scalar",
+        "yaml.customTags": [
-      "!include_dir_named scalar",
+          "!secret scalar",
-      "!include_dir_list scalar",
+          "!lambda scalar",
-      "!include_dir_merge_list scalar",
+          "!extend scalar",
-      "!include_dir_merge_named scalar"
+          "!include_dir_named scalar",
-    ],
+          "!include_dir_list scalar",
-    "files.exclude": {
+          "!include_dir_merge_list scalar",
-      "**/.git": true,
+          "!include_dir_merge_named scalar"
-      "**/.DS_Store": true,
+        ],
-      "**/*.pyc": {
+        "files.exclude": {
-        "when": "$(basename).py"
+          "**/.git": true,
-      },
+          "**/.DS_Store": true,
-      "**/__pycache__": true
+          "**/*.pyc": {
-    },
+            "when": "$(basename).py"
-    "files.associations": {
+          },
-      "**/.vscode/*.json": "jsonc"
+          "**/__pycache__": true
-    },
+        },
-    "C_Cpp.clang_format_path": "/usr/bin/clang-format-11",
+        "files.associations": {
+          "**/.vscode/*.json": "jsonc"
+        },
+        "C_Cpp.clang_format_path": "/usr/bin/clang-format-13"
+      }
+    }
   }
 }

.gitattributes

@@ -1,2 +1,3 @@
 # Normalize line endings to LF in the repository
 * text eol=lf
+*.png binary

.github/workflows/ci-docker.yml

@@ -11,6 +11,7 @@ on:
       - ".github/workflows/**"
       - "requirements*.txt"
       - "platformio.ini"
+      - "script/platformio_install_deps.py"
 
   pull_request:
     paths:
@@ -18,11 +19,17 @@ on:
       - ".github/workflows/**"
       - "requirements*.txt"
       - "platformio.ini"
+      - "script/platformio_install_deps.py"
 
 permissions:
   contents: read
   packages: read
 
+concurrency:
+  # yamllint disable-line rule:line-length
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
+  cancel-in-progress: true
+
 jobs:
   check-docker:
     name: Build docker containers

.github/workflows/ci.yml

@@ -7,55 +7,271 @@ on:
     branches: [dev, beta, release]
 
   pull_request:
+  merge_group:
 
 permissions:
   contents: read
 
+env:
+  DEFAULT_PYTHON: "3.9"
+  PYUPGRADE_TARGET: "--py39-plus"
+  CLANG_FORMAT_VERSION: "13.0.1"
+
 concurrency:
   # yamllint disable-line rule:line-length
   group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
   cancel-in-progress: true
 
 jobs:
-  ci:
+  common:
-    name: ${{ matrix.name }}
+    name: Create common environment
     runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Set up Python ${{ env.DEFAULT_PYTHON }}
+        uses: actions/setup-python@v4.6.0
+        with:
+          python-version: ${{ env.DEFAULT_PYTHON }}
+      - name: Restore Python virtual environment
+        id: cache-venv
+        uses: actions/cache@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Create Python virtual environment
+        if: steps.cache-venv.outputs.cache-hit != 'true'
+        run: |
+          python -m venv venv
+          . venv/bin/activate
+          python --version
+          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
+          pip install -e .
+
+  yamllint:
+    name: yamllint
+    runs-on: ubuntu-latest
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Run yamllint
+        uses: frenck/action-yamllint@v1.4.1
+
+  black:
+    name: Check black
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Run black
+        run: |
+          . venv/bin/activate
+          black --verbose esphome tests
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  flake8:
+    name: Check flake8
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Run flake8
+        run: |
+          . venv/bin/activate
+          flake8 esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pylint:
+    name: Check pylint
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Run pylint
+        run: |
+          . venv/bin/activate
+          pylint -f parseable --persistent=n esphome
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  pyupgrade:
+    name: Check pyupgrade
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Run pyupgrade
+        run: |
+          . venv/bin/activate
+          pyupgrade ${{ env.PYUPGRADE_TARGET }} `find esphome -name "*.py" -type f`
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  ci-custom:
+    name: Run script/ci-custom
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/ci-custom.json"
+      - name: Run script/ci-custom
+        run: |
+          . venv/bin/activate
+          script/ci-custom.py
+          script/build_codeowners.py --check
+
+  pytest:
+    name: Run pytest
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Register matcher
+        run: echo "::add-matcher::.github/workflows/matchers/pytest.json"
+      - name: Run pytest
+        run: |
+          . venv/bin/activate
+          pytest -vv --tb=native tests
+
+  clang-format:
+    name: Check clang-format
+    runs-on: ubuntu-latest
+    needs:
+      - common
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Install clang-format
+        run: |
+          . venv/bin/activate
+          pip install clang-format==${{ env.CLANG_FORMAT_VERSION }}
+      - name: Run clang-format
+        run: |
+          . venv/bin/activate
+          script/clang-format -i
+          git diff-index --quiet HEAD --
+      - name: Suggested changes
+        run: script/ci-suggest-changes
+        if: always()
+
+  compile-tests:
+    name: Run YAML test ${{ matrix.file }}
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
     strategy:
       fail-fast: false
+      max-parallel: 2
+      matrix:
+        file: [1, 2, 3, 3.1, 4, 5, 6, 7, 8]
+    steps:
+      - name: Check out code from GitHub
+        uses: actions/checkout@v3.5.2
+      - name: Restore Python virtual environment
+        uses: actions/cache/restore@v3.3.1
+        with:
+          path: venv
+          # yamllint disable-line rule:line-length
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
+      - name: Cache platformio
+        uses: actions/cache@v3.3.1
+        with:
+          path: ~/.platformio
+          # yamllint disable-line rule:line-length
+          key: platformio-test${{ matrix.file }}-${{ hashFiles('platformio.ini') }}
+      - name: Run esphome compile tests/test${{ matrix.file }}.yaml
+        run: |
+          . venv/bin/activate
+          esphome compile tests/test${{ matrix.file }}.yaml
+
+  clang-tidy:
+    name: ${{ matrix.name }}
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
+    strategy:
+      fail-fast: false
+      max-parallel: 2
       matrix:
         include:
-          - id: ci-custom
-            name: Run script/ci-custom
-          - id: lint-python
-            name: Run script/lint-python
-          - id: test
-            file: tests/test1.yaml
-            name: Test tests/test1.yaml
-            pio_cache_key: test1
-          - id: test
-            file: tests/test2.yaml
-            name: Test tests/test2.yaml
-            pio_cache_key: test2
-          - id: test
-            file: tests/test3.yaml
-            name: Test tests/test3.yaml
-            pio_cache_key: test3
-          - id: test
-            file: tests/test4.yaml
-            name: Test tests/test4.yaml
-            pio_cache_key: test4
-          - id: test
-            file: tests/test5.yaml
-            name: Test tests/test5.yaml
-            pio_cache_key: test5
-          - id: test
-            file: tests/test6.yaml
-            name: Test tests/test6.yaml
-            pio_cache_key: test6
-          - id: pytest
-            name: Run pytest
-          - id: clang-format
-            name: Run script/clang-format
           - id: clang-tidy
             name: Run script/clang-tidy for ESP8266
             options: --environment esp8266-arduino-tidy --grep USE_ESP8266
@@ -80,106 +296,65 @@ jobs:
             name: Run script/clang-tidy for ESP32 IDF
             options: --environment esp32-idf-tidy --grep USE_ESP_IDF
             pio_cache_key: tidyesp32-idf
-          - id: yamllint
-            name: Run yamllint
 
     steps:
-      - uses: actions/checkout@v3
+      - name: Check out code from GitHub
-      - name: Set up Python
+        uses: actions/checkout@v3.5.2
-        uses: actions/setup-python@v4
+      - name: Restore Python virtual environment
-        id: python
+        uses: actions/cache/restore@v3.3.1
         with:
-          python-version: "3.9"
+          path: venv
-
-      - name: Cache virtualenv
-        uses: actions/cache@v3
-        with:
-          path: .venv
           # yamllint disable-line rule:line-length
-          key: venv-${{ steps.python.outputs.python-version }}-${{ hashFiles('requirements*.txt') }}
+          key: ${{ runner.os }}-${{ env.DEFAULT_PYTHON }}-venv-${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}
-          restore-keys: |
+        # Use per check platformio cache because checks use different parts
-            venv-${{ steps.python.outputs.python-version }}-
-
-      - name: Set up virtualenv
-        # yamllint disable rule:line-length
-        run: |
-          python -m venv .venv
-          source .venv/bin/activate
-          pip install -U pip
-          pip install -r requirements.txt -r requirements_optional.txt -r requirements_test.txt
-          pip install -e .
-          echo "$GITHUB_WORKSPACE/.venv/bin" >> $GITHUB_PATH
-          echo "VIRTUAL_ENV=$GITHUB_WORKSPACE/.venv" >> $GITHUB_ENV
-        # yamllint enable rule:line-length
-
-      # Use per check platformio cache because checks use different parts
       - name: Cache platformio
-        uses: actions/cache@v3
+        uses: actions/cache@v3.3.1
         with:
           path: ~/.platformio
           # yamllint disable-line rule:line-length
           key: platformio-${{ matrix.pio_cache_key }}-${{ hashFiles('platformio.ini') }}
-        if: matrix.id == 'test' || matrix.id == 'clang-tidy'
 
-      - name: Install clang tools
+      - name: Install clang-tidy
-        run: |
+        run: sudo apt-get install clang-tidy-11
-          sudo apt-get install \
-              clang-format-11 \
-              clang-tidy-11
-        if: matrix.id == 'clang-tidy' || matrix.id == 'clang-format'
 
       - name: Register problem matchers
         run: |
-          echo "::add-matcher::.github/workflows/matchers/ci-custom.json"
-          echo "::add-matcher::.github/workflows/matchers/lint-python.json"
-          echo "::add-matcher::.github/workflows/matchers/python.json"
-          echo "::add-matcher::.github/workflows/matchers/pytest.json"
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
           echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
-      - name: Lint Custom
-        run: |
-          script/ci-custom.py
-          script/build_codeowners.py --check
-        if: matrix.id == 'ci-custom'
-
-      - name: Lint Python
-        run: script/lint-python -a
-        if: matrix.id == 'lint-python'
-
-      - run: esphome compile ${{ matrix.file }}
-        if: matrix.id == 'test'
-        env:
-          # Also cache libdeps, store them in a ~/.platformio subfolder
-          PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
-
-      - name: Run pytest
-        run: |
-          pytest -vv --tb=native tests
-        if: matrix.id == 'pytest'
-
-      # Also run git-diff-index so that the step is marked as failed on
-      # formatting errors, since clang-format doesn't do anything but
-      # change files if -i is passed.
-      - name: Run clang-format
-        run: |
-          script/clang-format -i
-          git diff-index --quiet HEAD --
-        if: matrix.id == 'clang-format'
-
       - name: Run clang-tidy
         run: |
+          . venv/bin/activate
           script/clang-tidy --all-headers --fix ${{ matrix.options }}
-        if: matrix.id == 'clang-tidy'
         env:
           # Also cache libdeps, store them in a ~/.platformio subfolder
           PLATFORMIO_LIBDEPS_DIR: ~/.platformio/libdeps
 
-      - name: Run yamllint
-        if: matrix.id == 'yamllint'
-        uses: frenck/action-yamllint@v1.3.0
-
       - name: Suggested changes
         run: script/ci-suggest-changes
         # yamllint disable-line rule:line-length
-        if: always() && (matrix.id == 'clang-tidy' || matrix.id == 'clang-format' || matrix.id == 'lint-python')
+        if: always()
+
+  ci-status:
+    name: CI Status
+    runs-on: ubuntu-latest
+    needs:
+      - common
+      - black
+      - ci-custom
+      - clang-format
+      - flake8
+      - pylint
+      - pytest
+      - pyupgrade
+      - yamllint
+      - compile-tests
+      - clang-tidy
+    if: always()
+    steps:
+      - name: Success
+        if: ${{ !(contains(needs.*.result, 'failure')) }}
+        run: exit 0
+      - name: Failure
+        if: ${{ contains(needs.*.result, 'failure') }}
+        run: exit 1

.github/workflows/lock.yml

@@ -18,7 +18,7 @@ jobs:
   lock:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@v3
+      - uses: dessant/lock-threads@v4
         with:
           pr-inactive-days: "1"
           pr-lock-reason: ""

.github/workflows/release.yml

@@ -30,8 +30,12 @@ jobs:
             TAG=$(cat esphome/const.py | sed -n -E "s/^__version__\s+=\s+\"(.+)\"$/\1/p")
             today="$(date --utc '+%Y%m%d')"
             TAG="${TAG}${today}"
+            BRANCH=${GITHUB_REF#refs/heads/}
+            if [[ "$BRANCH" != "dev" ]]; then
+              TAG="${TAG}-${BRANCH}"
+            fi
           fi
-          echo "::set-output name=tag::${TAG}"
+          echo "tag=${TAG}" >> $GITHUB_OUTPUT
         # yamllint enable rule:line-length
 
   deploy-pypi:
@@ -45,9 +49,11 @@ jobs:
         with:
           python-version: "3.x"
       - name: Set up python environment
+        env:
+          ESPHOME_NO_VENV: 1
         run: |
           script/setup
-          pip install setuptools wheel twine
+          pip install twine
       - name: Build
         run: python setup.py sdist bdist_wheel
       - name: Upload
@@ -57,17 +63,30 @@ jobs:
         run: twine upload dist/*
 
   deploy-docker:
-    name: Build and publish docker containers
+    name: Build and publish ESPHome ${{ matrix.image.title}}
     if: github.repository == 'esphome/esphome'
     permissions:
       contents: read
       packages: write
     runs-on: ubuntu-latest
+    continue-on-error: ${{ matrix.image.title == 'lint' }}
     needs: [init]
     strategy:
+      fail-fast: false
       matrix:
-        arch: [amd64, armv7, aarch64]
+        image:
-        build_type: ["ha-addon", "docker", "lint"]
+          - title: "ha-addon"
+            suffix: "hassio"
+            target: "hassio"
+            baseimg: "hassio"
+          - title: "docker"
+            suffix: ""
+            target: "docker"
+            baseimg: "docker"
+          - title: "lint"
+            suffix: "lint"
+            target: "lint"
+            baseimg: "docker"
     steps:
       - uses: actions/checkout@v3
       - name: Set up Python
@@ -92,69 +111,47 @@ jobs:
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
+      - name: Generate short tags
+        id: tags
+        run: |
+          docker/generate_tags.py \
+            --tag "${{ needs.init.outputs.tag }}" \
+            --suffix "${{ matrix.image.suffix }}"
+
       - name: Build and push
-        run: |
+        uses: docker/build-push-action@v4
-          docker/build.py \
-            --tag "${{ needs.init.outputs.tag }}" \
-            --arch "${{ matrix.arch }}" \
-            --build-type "${{ matrix.build_type }}" \
-            build \
-            --push
-
-  deploy-docker-manifest:
-    if: github.repository == 'esphome/esphome'
-    permissions:
-      contents: read
-      packages: write
-    runs-on: ubuntu-latest
-    needs: [init, deploy-docker]
-    strategy:
-      matrix:
-        build_type: ["ha-addon", "docker", "lint"]
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set up Python
-        uses: actions/setup-python@v4
         with:
-          python-version: "3.9"
+          context: .
-      - name: Enable experimental manifest support
+          file: ./docker/Dockerfile
-        run: |
+          platforms: linux/amd64,linux/arm/v7,linux/arm64
-          mkdir -p ~/.docker
+          target: ${{ matrix.image.target }}
-          echo "{\"experimental\": \"enabled\"}" > ~/.docker/config.json
+          push: true
-
+          # yamllint disable rule:line-length
-      - name: Log in to docker hub
+          cache-from: type=registry,ref=ghcr.io/${{ steps.tags.outputs.image }}:cache-${{ steps.tags.outputs.channel }}
-        uses: docker/login-action@v2
+          cache-to: type=registry,ref=ghcr.io/${{ steps.tags.outputs.image }}:cache-${{ steps.tags.outputs.channel }},mode=max
-        with:
+          # yamllint enable rule:line-length
-          username: ${{ secrets.DOCKER_USER }}
+          tags: ${{ steps.tags.outputs.tags }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
+          build-args: |
-      - name: Log in to the GitHub container registry
+            BASEIMGTYPE=${{ matrix.image.baseimg }}
-        uses: docker/login-action@v2
+            BUILD_VERSION=${{ needs.init.outputs.tag }}
-        with:
-          registry: ghcr.io
-          username: ${{ github.actor }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Run manifest
-        run: |
-          docker/build.py \
-            --tag "${{ needs.init.outputs.tag }}" \
-            --build-type "${{ matrix.build_type }}" \
-            manifest
 
   deploy-ha-addon-repo:
     if: github.repository == 'esphome/esphome' && github.event_name == 'release'
     runs-on: ubuntu-latest
     needs: [deploy-docker]
     steps:
-      - env:
+      - name: Trigger Workflow
-          TOKEN: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
+        uses: actions/github-script@v6
-        # yamllint disable rule:line-length
+        with:
-        run: |
+          github-token: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
-          TAG="${GITHUB_REF#refs/tags/}"
+          script: |
-          curl \
+            github.rest.actions.createWorkflowDispatch({
-            -u ":$TOKEN" \
+              owner: "esphome",
-            -X POST \
+              repo: "home-assistant-addon",
-            -H "Accept: application/vnd.github.v3+json" \
+              workflow_id: "bump-version.yml",
-            https://api.github.com/repos/esphome/home-assistant-addon/actions/workflows/bump-version.yml/dispatches \
+              ref: "main",
-            -d "{\"ref\":\"main\",\"inputs\":{\"version\":\"$TAG\"}}"
+              inputs: {
-        # yamllint enable rule:line-length
+                version: "${{ github.event.release.tag_name }}",
+                content: ${{ toJSON(github.event.release.body) }}
+              }
+            })

.github/workflows/stale.yml

@@ -18,7 +18,7 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v6
+      - uses: actions/stale@v8
         with:
           days-before-pr-stale: 90
           days-before-pr-close: 7
@@ -26,7 +26,7 @@ jobs:
           days-before-issue-close: -1
           remove-stale-when-updated: true
           stale-pr-label: "stale"
-          exempt-pr-labels: "no-stale"
+          exempt-pr-labels: "not-stale"
           stale-pr-message: >
             There hasn't been any activity on this pull request recently. This
             pull request has been automatically marked as stale because of that
@@ -38,7 +38,7 @@ jobs:
   close-issues:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v6
+      - uses: actions/stale@v8
         with:
           days-before-pr-stale: -1
           days-before-pr-close: -1

.github/workflows/sync-device-classes.yml

@@ -0,0 +1,60 @@
+---
+name: Synchronise Device Classes from Home Assistant
+
+on:
+  workflow_dispatch:
+  schedule:
+    - cron: '45 6 * * *'
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  sync:
+    name: Sync Device Classes
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+
+      - name: Checkout Home Assistant
+        uses: actions/checkout@v3
+        with:
+          repository: home-assistant/core
+          path: lib/home-assistant
+
+      - name: Setup Python
+        uses: actions/setup-python@v4
+        with:
+          python-version: 3.11
+
+      - name: Install Home Assistant
+        run: |
+          python -m pip install --upgrade pip
+          pip install -e lib/home-assistant
+
+      - name: Sync
+        run: |
+          python ./script/sync-device_class.py
+
+      - name: Get PR template
+        id: pr-template-body
+        run: |
+          body=$(cat .github/PULL_REQUEST_TEMPLATE.md)
+          delimiter="$(openssl rand -hex 8)"
+          echo "body<<$delimiter" >> $GITHUB_OUTPUT
+          echo "$body" >> $GITHUB_OUTPUT
+          echo "$delimiter" >> $GITHUB_OUTPUT
+
+      - name: Commit changes
+        uses: peter-evans/create-pull-request@v5
+        with:
+          commit-message: "Synchronise Device Classes from Home Assistant"
+          committer: esphomebot <esphome@nabucasa.com>
+          author: esphomebot <esphome@nabucasa.com>
+          branch: sync/device-classes
+          delete-branch: true
+          title: "Synchronise Device Classes from Home Assistant"
+          body: ${{ steps.pr-template-body.outputs.body }}
+          token: ${{ secrets.DEVICE_CLASS_SYNC_TOKEN }}

.gitignore

@@ -128,3 +128,5 @@ tests/.esphome/
 
 sdkconfig.*
 !sdkconfig.defaults
+
+.tests/

.pre-commit-config.yaml

@@ -2,16 +2,16 @@
 # See https://pre-commit.com for more information
 # See https://pre-commit.com/hooks.html for more hooks
 repos:
-  - repo: https://github.com/ambv/black
+  - repo: https://github.com/psf/black
-    rev: 22.6.0
+    rev: 23.3.0
     hooks:
       - id: black
         args:
           - --safe
           - --quiet
         files: ^((esphome|script|tests)/.+)?[^/]+\.py$
-  - repo: https://gitlab.com/pycqa/flake8
+  - repo: https://github.com/PyCQA/flake8
-    rev: 4.0.1
+    rev: 6.0.0
     hooks:
       - id: flake8
         additional_dependencies:
@@ -27,7 +27,7 @@ repos:
           - --branch=release
           - --branch=beta
   - repo: https://github.com/asottile/pyupgrade
-    rev: v3.0.0
+    rev: v3.4.0
     hooks:
       - id: pyupgrade
         args: [--py39-plus]

.vscode/tasks.json

@@ -2,15 +2,24 @@
   "version": "2.0.0",
   "tasks": [
     {
-      "label": "run",
+      "label": "Run Dashboard",
       "type": "shell",
-      "command": "python3 -m esphome dashboard config/",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "-m",
+        "esphome",
+        "dashboard",
+        "config/"
+      ],
       "problemMatcher": []
     },
     {
       "label": "clang-tidy",
       "type": "shell",
-      "command": "./script/clang-tidy",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "./script/clang-tidy"
+      ],
       "problemMatcher": [
         {
           "owner": "clang-tidy",
@@ -27,6 +36,24 @@
           ]
         }
       ]
+    },
+    {
+      "label": "Generate proto files",
+      "type": "shell",
+      "command": "${command:python.interpreterPath}",
+      "args": [
+        "./script/api_protobuf/api_protobuf.py"
+      ],
+      "group": {
+        "kind": "build",
+        "isDefault": true
+      },
+      "presentation": {
+        "reveal": "never",
+        "close": true,
+        "panel": "new"
+      },
+      "problemMatcher": []
     }
   ]
 }

CODEOWNERS

@@ -11,19 +11,24 @@ esphome/*.py @esphome/core
 esphome/core/* @esphome/core
 
 # Integrations
+esphome/components/absolute_humidity/* @DAVe3283
 esphome/components/ac_dimmer/* @glmnet
 esphome/components/adc/* @esphome/core
 esphome/components/adc128s102/* @DeerMaximum
 esphome/components/addressable_light/* @justfalter
 esphome/components/airthings_ble/* @jeromelaban
+esphome/components/airthings_wave_base/* @jeromelaban @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
 esphome/components/airthings_wave_plus/* @jeromelaban
+esphome/components/alarm_control_panel/* @grahambrown11
 esphome/components/am43/* @buxtronix
 esphome/components/am43/cover/* @buxtronix
+esphome/components/am43/sensor/* @buxtronix
 esphome/components/analog_threshold/* @ianchi
 esphome/components/animation/* @syndlex
 esphome/components/anova/* @buxtronix
 esphome/components/api/* @OttoWinter
+esphome/components/as7341/* @mrgnr
 esphome/components/async_tcp/* @OttoWinter
 esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/b_parasite/* @rbaron
@@ -41,6 +46,8 @@ esphome/components/ble_client/* @buxtronix
 esphome/components/bluetooth_proxy/* @jesserockz
 esphome/components/bme680_bsec/* @trvrnrth
 esphome/components/bmp3xx/* @martgras
+esphome/components/bp1658cj/* @Cossid
+esphome/components/bp5758d/* @Cossid
 esphome/components/button/* @esphome/core
 esphome/components/canbus/* @danielschramm @mvturnho
 esphome/components/cap1188/* @MrEditor97
@@ -65,9 +72,11 @@ esphome/components/debug/* @OttoWinter
 esphome/components/delonghi/* @grob6000
 esphome/components/dfplayer/* @glmnet
 esphome/components/dht/* @OttoWinter
+esphome/components/display_menu_base/* @numo68
 esphome/components/dps310/* @kbx81
 esphome/components/ds1307/* @badbadc0ffee
 esphome/components/dsmr/* @glmnet @zuidwijk
+esphome/components/ee895/* @Stock-M
 esphome/components/ektf2232/* @jesserockz
 esphome/components/ens210/* @itn3rd77
 esphome/components/esp32/* @esphome/core
@@ -77,6 +86,7 @@ esphome/components/esp32_ble_server/* @jesserockz
 esphome/components/esp32_camera_web_server/* @ayufan
 esphome/components/esp32_can/* @Sympatron
 esphome/components/esp32_improv/* @jesserockz
+esphome/components/esp32_rmt_led_strip/* @jesserockz
 esphome/components/esp8266/* @esphome/core
 esphome/components/ethernet_info/* @gtjadsonsantos
 esphome/components/exposure_notifications/* @OttoWinter
@@ -86,38 +96,58 @@ esphome/components/factory_reset/* @anatoly-savchenkov
 esphome/components/fastled_base/* @OttoWinter
 esphome/components/feedback/* @ianchi
 esphome/components/fingerprint_grow/* @OnFreund @loongyh
+esphome/components/fs3000/* @kahrendt
 esphome/components/globals/* @esphome/core
+esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
 esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
 esphome/components/growatt_solar/* @leeuwte
+esphome/components/haier/* @Yarikx
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
 esphome/components/hbridge/light/* @DotNetDann
 esphome/components/heatpumpir/* @rob-deutsch
 esphome/components/hitachi_ac424/* @sourabhjaiswal
+esphome/components/hm3301/* @freekode
 esphome/components/homeassistant/* @OttoWinter
 esphome/components/honeywellabp/* @RubyBailey
+esphome/components/host/* @esphome/core
 esphome/components/hrxl_maxsonar_wr/* @netmikey
+esphome/components/hte501/* @Stock-M
 esphome/components/hydreon_rgxx/* @functionpointer
+esphome/components/hyt271/* @Philippe12
 esphome/components/i2c/* @esphome/core
 esphome/components/i2s_audio/* @jesserockz
+esphome/components/i2s_audio/media_player/* @jesserockz
+esphome/components/i2s_audio/microphone/* @jesserockz
+esphome/components/i2s_audio/speaker/* @jesserockz
+esphome/components/ili9xxx/* @nielsnl68
+esphome/components/improv_base/* @esphome/core
 esphome/components/improv_serial/* @esphome/core
 esphome/components/ina260/* @MrEditor97
 esphome/components/inkbird_ibsth1_mini/* @fkirill
 esphome/components/inkplate6/* @jesserockz
 esphome/components/integration/* @OttoWinter
+esphome/components/internal_temperature/* @Mat931
 esphome/components/interval/* @esphome/core
 esphome/components/json/* @OttoWinter
 esphome/components/kalman_combinator/* @Cat-Ion
+esphome/components/key_collector/* @ssieb
+esphome/components/key_provider/* @ssieb
+esphome/components/kuntze/* @ssieb
+esphome/components/lcd_menu/* @numo68
+esphome/components/ld2410/* @sebcaps
 esphome/components/ledc/* @OttoWinter
 esphome/components/light/* @esphome/core
 esphome/components/lilygo_t5_47/touchscreen/* @jesserockz
 esphome/components/lock/* @esphome/core
 esphome/components/logger/* @esphome/core
 esphome/components/ltr390/* @sjtrny
+esphome/components/matrix_keypad/* @ssieb
 esphome/components/max31865/* @DAVe3283
 esphome/components/max44009/* @berfenger
+esphome/components/max6956/* @looping40
 esphome/components/max7219digit/* @rspaargaren
 esphome/components/max9611/* @mckaymatthew
 esphome/components/mcp23008/* @jesserockz
@@ -136,10 +166,14 @@ esphome/components/mcp9808/* @k7hpn
 esphome/components/md5/* @esphome/core
 esphome/components/mdns/* @esphome/core
 esphome/components/media_player/* @jesserockz
+esphome/components/microphone/* @jesserockz
+esphome/components/mics_4514/* @jesserockz
 esphome/components/midea/* @dudanov
 esphome/components/midea_ir/* @dudanov
 esphome/components/mitsubishi/* @RubyBailey
 esphome/components/mlx90393/* @functionpointer
+esphome/components/mlx90614/* @jesserockz
+esphome/components/mmc5603/* @benhoff
 esphome/components/modbus_controller/* @martgras
 esphome/components/modbus_controller/binary_sensor/* @martgras
 esphome/components/modbus_controller/number/* @martgras
@@ -148,8 +182,9 @@ esphome/components/modbus_controller/select/* @martgras @stegm
 esphome/components/modbus_controller/sensor/* @martgras
 esphome/components/modbus_controller/switch/* @martgras
 esphome/components/modbus_controller/text_sensor/* @martgras
-esphome/components/mopeka_ble/* @spbrogan
+esphome/components/mopeka_ble/* @Fabian-Schmidt @spbrogan
 esphome/components/mopeka_pro_check/* @spbrogan
+esphome/components/mopeka_std_check/* @Fabian-Schmidt
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
 esphome/components/network/* @esphome/core
@@ -162,6 +197,9 @@ esphome/components/nfc/* @jesserockz
 esphome/components/number/* @esphome/core
 esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
+esphome/components/pca6416a/* @Mat931
+esphome/components/pca9554/* @hwstar
+esphome/components/pcf85063/* @brogon
 esphome/components/pid/* @OttoWinter
 esphome/components/pipsolar/* @andreashergert1984
 esphome/components/pm1006/* @habbie
@@ -185,6 +223,7 @@ esphome/components/restart/* @esphome/core
 esphome/components/rf_bridge/* @jesserockz
 esphome/components/rgbct/* @jesserockz
 esphome/components/rp2040/* @jesserockz
+esphome/components/rp2040_pio_led_strip/* @Papa-DMan
 esphome/components/rp2040_pwm/* @jesserockz
 esphome/components/rtttl/* @glmnet
 esphome/components/safe_mode/* @jsuanet @paulmonigatti
@@ -194,6 +233,7 @@ esphome/components/sdm_meter/* @jesserockz @polyfaces
 esphome/components/sdp3x/* @Azimath
 esphome/components/selec_meter/* @sourabhjaiswal
 esphome/components/select/* @esphome/core
+esphome/components/sen21231/* @shreyaskarnik
 esphome/components/sen5x/* @martgras
 esphome/components/sensirion_common/* @martgras
 esphome/components/sensor/* @esphome/core
@@ -202,12 +242,18 @@ esphome/components/sgp4x/* @SenexCrenshaw @martgras
 esphome/components/shelly_dimmer/* @edge90 @rnauber
 esphome/components/sht4x/* @sjtrny
 esphome/components/shutdown/* @esphome/core @jsuanet
+esphome/components/sigma_delta_output/* @Cat-Ion
 esphome/components/sim800l/* @glmnet
-esphome/components/sm2135/* @BoukeHaarsma23
+esphome/components/sm10bit_base/* @Cossid
+esphome/components/sm2135/* @BoukeHaarsma23 @dd32 @matika77
+esphome/components/sm2235/* @Cossid
+esphome/components/sm2335/* @Cossid
 esphome/components/sml/* @alengwenus
 esphome/components/smt100/* @piechade
+esphome/components/sn74hc165/* @jesserockz
 esphome/components/socket/* @esphome/core
 esphome/components/sonoff_d1/* @anatoly-savchenkov
+esphome/components/speaker/* @jesserockz
 esphome/components/spi/* @esphome/core
 esphome/components/sprinkler/* @kbx81
 esphome/components/sps30/* @martgras
@@ -231,14 +277,18 @@ esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
 esphome/components/tca9548a/* @andreashergert1984
 esphome/components/tcl112/* @glmnet
+esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
+esphome/components/template/alarm_control_panel/* @grahambrown11
 esphome/components/thermostat/* @kbx81
 esphome/components/time/* @OttoWinter
 esphome/components/tlc5947/* @rnauber
 esphome/components/tm1621/* @Philippe12
 esphome/components/tm1637/* @glmnet
 esphome/components/tm1638/* @skykingjwc
+esphome/components/tm1651/* @freekode
 esphome/components/tmp102/* @timsavage
+esphome/components/tmp1075/* @sybrenstuvel
 esphome/components/tmp117/* @Azimath
 esphome/components/tof10120/* @wstrzalka
 esphome/components/toshiba/* @kbx81
@@ -255,12 +305,16 @@ esphome/components/uart/* @esphome/core
 esphome/components/ufire_ec/* @pvizeli
 esphome/components/ufire_ise/* @pvizeli
 esphome/components/ultrasonic/* @OttoWinter
+esphome/components/vbus/* @ssieb
 esphome/components/version/* @esphome/core
+esphome/components/voice_assistant/* @jesserockz
 esphome/components/wake_on_lan/* @willwill2will54
 esphome/components/web_server_base/* @OttoWinter
 esphome/components/whirlpool/* @glmnet
 esphome/components/whynter/* @aeonsablaze
+esphome/components/wiegand/* @ssieb
 esphome/components/wl_134/* @hobbypunk90
+esphome/components/x9c/* @EtienneMD
 esphome/components/xiaomi_lywsd03mmc/* @ahpohl
 esphome/components/xiaomi_mhoc303/* @drug123
 esphome/components/xiaomi_mhoc401/* @vevsvevs

MANIFEST.in

@@ -1,8 +1,6 @@
 include LICENSE
 include README.md
 include requirements.txt
-include esphome/dashboard/templates/*.html
+recursive-include esphome *.cpp *.h *.tcc *.c
-recursive-include esphome/dashboard/static *.ico *.js *.css *.woff* LICENSE
-recursive-include esphome *.cpp *.h *.tcc
 recursive-include esphome *.py.script
 recursive-include esphome LICENSE.txt

docker/Dockerfile

@@ -6,17 +6,14 @@
 ARG BASEIMGTYPE=docker
 
 # https://github.com/hassio-addons/addon-debian-base/releases
-FROM ghcr.io/hassio-addons/debian-base/amd64:5.3.0 AS base-hassio-amd64
+FROM ghcr.io/hassio-addons/debian-base:6.2.3 AS base-hassio
-FROM ghcr.io/hassio-addons/debian-base/aarch64:5.3.0 AS base-hassio-arm64
-FROM ghcr.io/hassio-addons/debian-base/armv7:5.3.0 AS base-hassio-armv7
 # https://hub.docker.com/_/debian?tab=tags&page=1&name=bullseye
-FROM debian:bullseye-20220328-slim AS base-docker-amd64
+FROM debian:bullseye-20230208-slim AS base-docker
-FROM debian:bullseye-20220328-slim AS base-docker-arm64
-FROM debian:bullseye-20220328-slim AS base-docker-armv7
 
-# Use TARGETARCH/TARGETVARIANT defined by docker
+FROM base-${BASEIMGTYPE} AS base
-# https://docs.docker.com/engine/reference/builder/#automatic-platform-args-in-the-global-scope
+
-FROM base-${BASEIMGTYPE}-${TARGETARCH}${TARGETVARIANT} AS base
+ARG TARGETARCH
+ARG TARGETVARIANT
 
 RUN \
     apt-get update \
@@ -27,10 +24,13 @@ RUN \
         python3-setuptools=52.0.0-4 \
         python3-pil=8.1.2+dfsg-0.3+deb11u1 \
         python3-cryptography=3.3.2-1 \
+        python3-venv=3.9.2-3 \
         iputils-ping=3:20210202-1 \
-        git=1:2.30.2-1 \
+        git=1:2.30.2-1+deb11u2 \
-        curl=7.74.0-1.3+deb11u1 \
+        curl=7.74.0-1.3+deb11u7 \
-        openssh-client=1:8.4p1-5 \
+        openssh-client=1:8.4p1-5+deb11u1 \
+        libcairo2=1.16.0-5 \
+        python3-cffi=1.14.5-1 \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
@@ -42,11 +42,19 @@ ENV \
   # Store globally installed pio libs in /piolibs
   PLATFORMIO_GLOBALLIB_DIR=/piolibs
 
+# Support legacy binaries on Debian multiarch system. There is no "correct" way
+# to do this, other than using properly built toolchains...
+# See: https://unix.stackexchange.com/questions/553743/correct-way-to-add-lib-ld-linux-so-3-in-debian
+RUN \
+    if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        ln -s /lib/arm-linux-gnueabihf/ld-linux.so.3 /lib/ld-linux.so.3; \
+    fi
+
 RUN \
     # Ubuntu python3-pip is missing wheel
     pip3 install --no-cache-dir \
         wheel==0.37.1 \
-        platformio==6.1.4 \
+        platformio==6.1.7 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_platformio_interval 1000000 \
@@ -54,10 +62,10 @@ RUN \
 
 
 # First install requirements to leverage caching when requirements don't change
-COPY requirements.txt requirements_optional.txt docker/platformio_install_deps.py platformio.ini /
+COPY requirements.txt requirements_optional.txt script/platformio_install_deps.py platformio.ini /
 RUN \
     pip3 install --no-cache-dir -r /requirements.txt -r /requirements_optional.txt \
-    && /platformio_install_deps.py /platformio.ini
+    && /platformio_install_deps.py /platformio.ini --libraries
 
 
 # ======================= docker-type image =======================
@@ -94,7 +102,7 @@ RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
     && apt-get install -y --no-install-recommends \
-        nginx-light=1.18.0-6.1+deb11u2 \
+        nginx-light=1.18.0-6.1+deb11u3 \
     && rm -rf \
         /tmp/* \
         /var/{cache,log}/* \
@@ -130,11 +138,11 @@ RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
     && apt-get install -y --no-install-recommends \
-        clang-format-11=1:11.0.1-2 \
+        clang-format-13=1:13.0.1-6~deb11u1 \
         clang-tidy-11=1:11.0.1-2 \
         patch=2.7.6-7 \
         software-properties-common=0.96.20.2-2.1 \
-        nano=5.4-2+deb11u1 \
+        nano=5.4-2+deb11u2 \
         build-essential=12.9 \
         python3-dev=3.9.2-3 \
     && rm -rf \

docker/build.py

@@ -8,32 +8,49 @@ import re
 import sys
 
 
-CHANNEL_DEV = 'dev'
+CHANNEL_DEV = "dev"
-CHANNEL_BETA = 'beta'
+CHANNEL_BETA = "beta"
-CHANNEL_RELEASE = 'release'
+CHANNEL_RELEASE = "release"
 CHANNELS = [CHANNEL_DEV, CHANNEL_BETA, CHANNEL_RELEASE]
 
-ARCH_AMD64 = 'amd64'
+ARCH_AMD64 = "amd64"
-ARCH_ARMV7 = 'armv7'
+ARCH_ARMV7 = "armv7"
-ARCH_AARCH64 = 'aarch64'
+ARCH_AARCH64 = "aarch64"
 ARCHS = [ARCH_AMD64, ARCH_ARMV7, ARCH_AARCH64]
 
-TYPE_DOCKER = 'docker'
+TYPE_DOCKER = "docker"
-TYPE_HA_ADDON = 'ha-addon'
+TYPE_HA_ADDON = "ha-addon"
-TYPE_LINT = 'lint'
+TYPE_LINT = "lint"
 TYPES = [TYPE_DOCKER, TYPE_HA_ADDON, TYPE_LINT]
 
 
 parser = argparse.ArgumentParser()
-parser.add_argument("--tag", type=str, required=True, help="The main docker tag to push to. If a version number also adds latest and/or beta tag")
+parser.add_argument(
-parser.add_argument("--arch", choices=ARCHS, required=False, help="The architecture to build for")
+    "--tag",
-parser.add_argument("--build-type", choices=TYPES, required=True, help="The type of build to run")
+    type=str,
-parser.add_argument("--dry-run", action="store_true", help="Don't run any commands, just print them")
+    required=True,
-subparsers = parser.add_subparsers(help="Action to perform", dest="command", required=True)
+    help="The main docker tag to push to. If a version number also adds latest and/or beta tag",
+)
+parser.add_argument(
+    "--arch", choices=ARCHS, required=False, help="The architecture to build for"
+)
+parser.add_argument(
+    "--build-type", choices=TYPES, required=True, help="The type of build to run"
+)
+parser.add_argument(
+    "--dry-run", action="store_true", help="Don't run any commands, just print them"
+)
+subparsers = parser.add_subparsers(
+    help="Action to perform", dest="command", required=True
+)
 build_parser = subparsers.add_parser("build", help="Build the image")
 build_parser.add_argument("--push", help="Also push the images", action="store_true")
-build_parser.add_argument("--load", help="Load the docker image locally", action="store_true")
+build_parser.add_argument(
-manifest_parser = subparsers.add_parser("manifest", help="Create a manifest from already pushed images")
+    "--load", help="Load the docker image locally", action="store_true"
+)
+manifest_parser = subparsers.add_parser(
+    "manifest", help="Create a manifest from already pushed images"
+)
 
 
 @dataclass(frozen=True)
@@ -49,7 +66,7 @@ class DockerParams:
         prefix = {
             TYPE_DOCKER: "esphome/esphome",
             TYPE_HA_ADDON: "esphome/esphome-hassio",
-            TYPE_LINT: "esphome/esphome-lint"
+            TYPE_LINT: "esphome/esphome-lint",
         }[build_type]
         build_to = f"{prefix}-{arch}"
         baseimgtype = {
@@ -128,13 +145,21 @@ def main():
 
         # 3. build
         cmd = [
-            "docker", "buildx", "build",
+            "docker",
-            "--build-arg", f"BASEIMGTYPE={params.baseimgtype}",
+            "buildx",
-            "--build-arg", f"BUILD_VERSION={args.tag}",
+            "build",
-            "--cache-from", f"type=registry,ref={cache_img}",
+            "--build-arg",
-            "--file", "docker/Dockerfile",
+            f"BASEIMGTYPE={params.baseimgtype}",
-            "--platform", params.platform,
+            "--build-arg",
-            "--target", params.target,
+            f"BUILD_VERSION={args.tag}",
+            "--cache-from",
+            f"type=registry,ref={cache_img}",
+            "--file",
+            "docker/Dockerfile",
+            "--platform",
+            params.platform,
+            "--target",
+            params.target,
         ]
         for img in imgs:
             cmd += ["--tag", img]
@@ -160,9 +185,7 @@ def main():
             run_command(*cmd)
         # 2. Push manifests
         for target in targets:
-            run_command(
+            run_command("docker", "manifest", "push", target)
-                "docker", "manifest", "push", target
-            )
 
 
 if __name__ == "__main__":

docker/generate_tags.py

@@ -0,0 +1,68 @@
+#!/usr/bin/env python3
+import re
+import os
+import argparse
+import json
+
+CHANNEL_DEV = "dev"
+CHANNEL_BETA = "beta"
+CHANNEL_RELEASE = "release"
+
+parser = argparse.ArgumentParser()
+parser.add_argument(
+    "--tag",
+    type=str,
+    required=True,
+    help="The main docker tag to push to. If a version number also adds latest and/or beta tag",
+)
+parser.add_argument(
+    "--suffix",
+    type=str,
+    required=True,
+    help="The suffix of the tag.",
+)
+
+
+def main():
+    args = parser.parse_args()
+
+    # detect channel from tag
+    match = re.match(r"^(\d+\.\d+)(?:\.\d+)?(b\d+)?$", args.tag)
+    major_minor_version = None
+    if match is None:
+        channel = CHANNEL_DEV
+    elif match.group(2) is None:
+        major_minor_version = match.group(1)
+        channel = CHANNEL_RELEASE
+    else:
+        channel = CHANNEL_BETA
+
+    tags_to_push = [args.tag]
+    if channel == CHANNEL_DEV:
+        tags_to_push.append("dev")
+    elif channel == CHANNEL_BETA:
+        tags_to_push.append("beta")
+    elif channel == CHANNEL_RELEASE:
+        # Additionally push to beta
+        tags_to_push.append("beta")
+        tags_to_push.append("latest")
+
+        if major_minor_version:
+            tags_to_push.append("stable")
+            tags_to_push.append(major_minor_version)
+
+    suffix = f"-{args.suffix}" if args.suffix else ""
+
+    with open(os.environ["GITHUB_OUTPUT"], "w") as f:
+        print(f"channel={channel}", file=f)
+        print(f"image=esphome/esphome{suffix}", file=f)
+        full_tags = []
+
+        for tag in tags_to_push:
+            full_tags += [f"ghcr.io/esphome/esphome{suffix}:{tag}"]
+            full_tags += [f"esphome/esphome{suffix}:{tag}"]
+        print(f"tags={','.join(full_tags)}", file=f)
+
+
+if __name__ == "__main__":
+    main()

docker/ha-addon-rootfs/etc/cont-init.d/10-requirements.sh

@@ -1,41 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# This files check if all user configuration requirements are met
-# ==============================================================================
-
-# Check SSL requirements, if enabled
-if bashio::config.true 'ssl'; then
-    if ! bashio::config.has_value 'certfile'; then
-        bashio::log.fatal 'SSL is enabled, but no certfile was specified.'
-        bashio::exit.nok
-    fi
-
-    if ! bashio::config.has_value 'keyfile'; then
-        bashio::log.fatal 'SSL is enabled, but no keyfile was specified'
-        bashio::exit.nok
-    fi
-
-
-    certfile="/ssl/$(bashio::config 'certfile')"
-    keyfile="/ssl/$(bashio::config 'keyfile')"
-
-    if ! bashio::fs.file_exists "${certfile}"; then
-        if ! bashio::fs.file_exists "${keyfile}"; then
-            # Both files are missing, let's print a friendlier error message
-            bashio::log.fatal 'You enabled encrypted connections using the "ssl": true option.'
-            bashio::log.fatal "However, the SSL files '${certfile}' and '${keyfile}'"
-            bashio::log.fatal "were not found. If you're using Hass.io on your local network and don't want"
-            bashio::log.fatal 'to encrypt connections to the ESPHome dashboard, you can manually disable'
-            bashio::log.fatal 'SSL by setting "ssl" to false."'
-            bashio::exit.nok
-        fi
-        bashio::log.fatal "The configured certfile '${certfile}' was not found."
-        bashio::exit.nok
-    fi
-
-    if ! bashio::fs.file_exists "/ssl/$(bashio::config 'keyfile')"; then
-        bashio::log.fatal "The configured keyfile '${keyfile}' was not found."
-        bashio::exit.nok
-    fi
-fi

docker/ha-addon-rootfs/etc/cont-init.d/20-nginx.sh

@@ -1,34 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Configures NGINX for use with ESPHome
-# ==============================================================================
-
-declare certfile
-declare keyfile
-declare direct_port
-declare ingress_interface
-declare ingress_port
-
-mkdir -p /var/log/nginx
-
-direct_port=$(bashio::addon.port 6052)
-if bashio::var.has_value "${direct_port}"; then
-    if bashio::config.true 'ssl'; then
-        certfile=$(bashio::config 'certfile')
-        keyfile=$(bashio::config 'keyfile')
-
-        mv /etc/nginx/servers/direct-ssl.disabled /etc/nginx/servers/direct.conf
-        sed -i "s/%%certfile%%/${certfile}/g" /etc/nginx/servers/direct.conf
-        sed -i "s/%%keyfile%%/${keyfile}/g" /etc/nginx/servers/direct.conf
-    else
-        mv /etc/nginx/servers/direct.disabled /etc/nginx/servers/direct.conf
-    fi
-
-    sed -i "s/%%port%%/${direct_port}/g" /etc/nginx/servers/direct.conf
-fi
-
-ingress_port=$(bashio::addon.ingress_port)
-ingress_interface=$(bashio::addon.ip_address)
-sed -i "s/%%port%%/${ingress_port}/g" /etc/nginx/servers/ingress.conf
-sed -i "s/%%interface%%/${ingress_interface}/g" /etc/nginx/servers/ingress.conf

docker/ha-addon-rootfs/etc/cont-init.d/30-dirs.sh

@@ -1,9 +0,0 @@
-#!/usr/bin/with-contenv bashio
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# This files creates all directories used by esphome
-# ==============================================================================
-
-pio_cache_base=/data/cache/platformio
-
-mkdir -p "${pio_cache_base}"

docker/ha-addon-rootfs/etc/nginx/includes/proxy_params.conf

@@ -1,9 +1,9 @@
-proxy_http_version 1.1;
+proxy_http_version          1.1;
-proxy_ignore_client_abort off;
+proxy_ignore_client_abort   off;
-proxy_read_timeout 86400s;
+proxy_read_timeout          86400s;
-proxy_redirect off;
+proxy_redirect              off;
-proxy_send_timeout 86400s;
+proxy_send_timeout          86400s;
-proxy_max_temp_file_size 0;
+proxy_max_temp_file_size    0;
 
 proxy_set_header Accept-Encoding "";
 proxy_set_header Connection $connection_upgrade;

docker/ha-addon-rootfs/etc/nginx/includes/server_params.conf

@@ -1,5 +1,7 @@
-root /dev/null;
+root            /dev/null;
-server_name $hostname;
+server_name     $hostname;
+
+client_max_body_size 512m;
 
 add_header X-Content-Type-Options nosniff;
 add_header X-XSS-Protection "1; mode=block";

docker/ha-addon-rootfs/etc/nginx/includes/ssl_params.conf

@@ -1,7 +1,6 @@
-ssl_protocols TLSv1.2;
+ssl_protocols TLSv1.2 TLSv1.3;
-ssl_prefer_server_ciphers on;
+ssl_prefer_server_ciphers off;
-ssl_ciphers ECDHE-RSA-AES256-GCM-SHA512:DHE-RSA-AES256-GCM-SHA512:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:DHE-RSA-AES256-SHA;
+ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384;
-ssl_ecdh_curve secp384r1;
 ssl_session_timeout  10m;
 ssl_session_cache shared:SSL:10m;
 ssl_session_tickets off;

docker/ha-addon-rootfs/etc/nginx/includes/upstream.conf

@@ -0,0 +1,3 @@
+upstream esphome {
+    server unix:/var/run/esphome.sock;
+}

docker/ha-addon-rootfs/etc/nginx/nginx.conf

@@ -2,7 +2,6 @@ daemon off;
 user root;
 pid /var/run/nginx.pid;
 worker_processes 1;
-# Hass.io addon log
 error_log /proc/1/fd/1 error;
 events {
     worker_connections 1024;
@@ -10,24 +9,22 @@ events {
 
 http {
     include /etc/nginx/includes/mime.types;
-    access_log stdout;
+
-    default_type application/octet-stream;
+    access_log              off;
-    gzip on;
+    default_type            application/octet-stream;
-    keepalive_timeout 65;
+    gzip                    on;
-    sendfile on;
+    keepalive_timeout       65;
-    server_tokens off;
+    sendfile                on;
+    server_tokens           off;
+
+    tcp_nodelay             on;
+    tcp_nopush              on;
 
     map $http_upgrade $connection_upgrade {
         default upgrade;
         ''      close;
     }
 
-    # Use Hass.io supervisor as resolver
+    include /etc/nginx/includes/upstream.conf;
-    resolver 172.30.32.2;
-
-    upstream esphome {
-        server unix:/var/run/esphome.sock;
-    }
-
     include /etc/nginx/servers/*.conf;
 }

docker/ha-addon-rootfs/etc/nginx/servers/.gitkeep

@@ -0,0 +1 @@
+Without requirements or design, programming is the art of adding bugs to an empty text file. (Louis Srygley)

docker/ha-addon-rootfs/etc/nginx/servers/direct.disabled

@@ -1,12 +0,0 @@
-server {
-    listen %%port%% default_server;
-
-    include /etc/nginx/includes/server_params.conf;
-    include /etc/nginx/includes/proxy_params.conf;
-    # Clear Hass.io Ingress header
-    proxy_set_header X-HA-Ingress "";
-
-    location / {
-        proxy_pass http://esphome;
-    }
-}

docker/ha-addon-rootfs/etc/nginx/templates/direct.gtpl

@@ -1,20 +1,26 @@
 server {
-    listen %%port%% default_server ssl http2;
+    {{ if not .ssl }}
+    listen 6052 default_server;
+    {{ else }}
+    listen 6052 default_server ssl http2;
+    {{ end }}
 
     include /etc/nginx/includes/server_params.conf;
     include /etc/nginx/includes/proxy_params.conf;
+
+    {{ if .ssl }}
     include /etc/nginx/includes/ssl_params.conf;
 
-    ssl on;
+    ssl_certificate /ssl/{{ .certfile }};
-    ssl_certificate /ssl/%%certfile%%;
+    ssl_certificate_key /ssl/{{ .keyfile }};
-    ssl_certificate_key /ssl/%%keyfile%%;
-
-    # Clear Hass.io Ingress header
-    proxy_set_header X-HA-Ingress "";
 
     # Redirect http requests to https on the same port.
     # https://rageagainstshell.com/2016/11/redirect-http-to-https-on-the-same-port-in-nginx/
     error_page 497 https://$http_host$request_uri;
+    {{ end }}
+
+    # Clear Home Assistant Ingress header
+    proxy_set_header X-HA-Ingress "";
 
     location / {
         proxy_pass http://esphome;

docker/ha-addon-rootfs/etc/nginx/templates/ingress.gtpl

@@ -1,14 +1,16 @@
 server {
-    listen %%interface%%:%%port%% default_server;
+    listen 127.0.0.1:{{ .port }} default_server;
+    listen {{ .interface }}:{{ .port }} default_server;
 
     include /etc/nginx/includes/server_params.conf;
     include /etc/nginx/includes/proxy_params.conf;
+
     # Set Home Assistant Ingress header
     proxy_set_header X-HA-Ingress "YES";
 
     location / {
-        # Only allow from Hass.io supervisor
         allow   172.30.32.2;
+        allow   127.0.0.1;
         deny    all;
 
         proxy_pass http://esphome;

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/run

@@ -0,0 +1,32 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Add-on: ESPHome
+# Sends discovery information to Home Assistant.
+# ==============================================================================
+declare config
+declare port
+
+# We only disable it when disabled explicitly
+if bashio::config.false 'home_assistant_dashboard_integration';
+then
+    bashio::log.info "Home Assistant discovery is disabled for this add-on."
+    bashio::exit.ok
+fi
+
+port=$(bashio::addon.ingress_port)
+
+# Wait for NGINX to become available
+bashio::net.wait_for "${port}" "127.0.0.1" 300
+
+config=$(\
+    bashio::var.json \
+        host "127.0.0.1" \
+        port "^${port}" \
+)
+
+if bashio::discovery "esphome" "${config}" > /dev/null; then
+    bashio::log.info "Successfully send discovery information to Home Assistant."
+else
+    bashio::log.error "Discovery message to Home Assistant failed!"
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/type

@@ -0,0 +1 @@
+oneshot

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/discovery/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/discovery/run

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/finish

@@ -0,0 +1,26 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Community Add-on: ESPHome
+# Take down the S6 supervision tree when ESPHome dashboard fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+
+bashio::log.info \
+  "Service ESPHome dashboard exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/run

@@ -1,10 +1,19 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Community Hass.io Add-ons: ESPHome
 # Runs the ESPHome dashboard
 # ==============================================================================
+readonly pio_cache_base=/data/cache/platformio
 
 export ESPHOME_IS_HA_ADDON=true
+export PLATFORMIO_GLOBALLIB_DIR=/piolibs
+
+# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+# setting `core_dir` would therefore prevent pio from accessing
+export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
 
 if bashio::config.true 'leave_front_door_open'; then
     export DISABLE_HA_AUTHENTICATION=true
@@ -22,14 +31,15 @@ if bashio::config.has_value 'relative_url'; then
     export ESPHOME_DASHBOARD_RELATIVE_URL=$(bashio::config 'relative_url')
 fi
 
-pio_cache_base=/data/cache/platformio
+if bashio::config.has_value 'default_compile_process_limit'; then
-# we can't set core_dir, because the settings file is stored in `core_dir/appstate.json`
+    export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=$(bashio::config 'default_compile_process_limit')
-# setting `core_dir` would therefore prevent pio from accessing
+else
-export PLATFORMIO_PLATFORMS_DIR="${pio_cache_base}/platforms"
+    if grep -q 'Raspberry Pi 3' /proc/cpuinfo; then
-export PLATFORMIO_PACKAGES_DIR="${pio_cache_base}/packages"
+        export ESPHOME_DEFAULT_COMPILE_PROCESS_LIMIT=1;
-export PLATFORMIO_CACHE_DIR="${pio_cache_base}/cache"
+    fi
+fi
 
-export PLATFORMIO_GLOBALLIB_DIR=/piolibs
+mkdir -p "${pio_cache_base}"
 
 bashio::log.info "Starting ESPHome dashboard..."
 exec esphome dashboard /config/esphome --socket /var/run/esphome.sock --ha-addon

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/esphome/type

@@ -0,0 +1 @@
+longrun

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/run

@@ -0,0 +1,27 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Configures NGINX for use with ESPHome
+# ==============================================================================
+mkdir -p /var/log/nginx
+
+# Generate Ingress configuration
+bashio::var.json \
+    interface "$(bashio::addon.ip_address)" \
+    port "^$(bashio::addon.ingress_port)" \
+    | tempio \
+        -template /etc/nginx/templates/ingress.gtpl \
+        -out /etc/nginx/servers/ingress.conf
+
+# Generate direct access configuration, if enabled.
+if bashio::var.has_value "$(bashio::addon.port 6052)"; then
+    bashio::config.require.ssl
+    bashio::var.json \
+        certfile "$(bashio::config 'certfile')" \
+        keyfile "$(bashio::config 'keyfile')" \
+        ssl "^$(bashio::config 'ssl')" \
+        | tempio \
+            -template /etc/nginx/templates/direct.gtpl \
+            -out /etc/nginx/servers/direct.conf
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/type

@@ -0,0 +1 @@
+oneshot

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/init-nginx/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-nginx/run

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/finish

@@ -0,0 +1,25 @@
+#!/command/with-contenv bashio
+# ==============================================================================
+# Community Hass.io Add-ons: ESPHome
+# Take down the S6 supervision tree when NGINX fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+
+bashio::log.info \
+  "Service NGINX exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -1,10 +1,11 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Community Hass.io Add-ons: ESPHome
 # Runs the NGINX proxy
 # ==============================================================================
 
-bashio::log.info "Waiting for dashboard to come up..."
+bashio::log.info "Waiting for ESPHome dashboard to come up..."
 
 while [[ ! -S /var/run/esphome.sock ]]; do
   sleep 0.5

docker/ha-addon-rootfs/etc/s6-overlay/s6-rc.d/nginx/type

@@ -0,0 +1 @@
+longrun

docker/ha-addon-rootfs/etc/services.d/esphome/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Take down the S6 supervision tree when ESPHome fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services

docker/ha-addon-rootfs/etc/services.d/nginx/finish

@@ -1,9 +0,0 @@
-#!/usr/bin/execlineb -S0
-# ==============================================================================
-# Community Hass.io Add-ons: ESPHome
-# Take down the S6 supervision tree when NGINX fails
-# ==============================================================================
-if -n { s6-test $# -ne 0 }
-if -n { s6-test ${1} -eq 256 }
-
-s6-svscanctl -t /var/run/s6/services

docker/platformio_install_deps.py

@@ -1,30 +0,0 @@
-#!/usr/bin/env python3
-# This script is used in the docker containers to preinstall
-# all platformio libraries in the global storage
-
-import configparser
-import subprocess
-import sys
-
-config = configparser.ConfigParser(inline_comment_prefixes=(';', ))
-config.read(sys.argv[1])
-
-libs = []
-# Extract from every lib_deps key in all sections
-for section in config.sections():
-    conf = config[section]
-    if "lib_deps" not in conf:
-        continue
-    for lib_dep in conf["lib_deps"].splitlines():
-        if not lib_dep:
-            # Empty line or comment
-            continue
-        if lib_dep.startswith("${"):
-            # Extending from another section
-            continue
-        if "@" not in lib_dep:
-            # No version pinned, this is an internal lib
-            continue
-        libs.append(lib_dep)
-
-subprocess.check_call(['platformio', 'lib', '-g', 'install', *libs])

esphome/__main__.py

@@ -18,6 +18,9 @@ from esphome.const import (
     CONF_LOGGER,
     CONF_NAME,
     CONF_OTA,
+    CONF_MQTT,
+    CONF_MDNS,
+    CONF_DISABLED,
     CONF_PASSWORD,
     CONF_PORT,
     CONF_ESPHOME,
@@ -42,7 +45,7 @@ from esphome.log import color, setup_log, Fore
 _LOGGER = logging.getLogger(__name__)
 
 
-def choose_prompt(options):
+def choose_prompt(options, purpose: str = None):
     if not options:
         raise EsphomeError(
             "Found no valid options for upload/logging, please make sure relevant "
@@ -53,7 +56,9 @@ def choose_prompt(options):
     if len(options) == 1:
         return options[0][1]
 
-    safe_print("Found multiple options, please choose one:")
+    safe_print(
+        f'Found multiple options{f" for {purpose}" if purpose else ""}, please choose one:'
+    )
     for i, (desc, _) in enumerate(options):
         safe_print(f"  [{i+1}] {desc}")
 
@@ -72,7 +77,9 @@ def choose_prompt(options):
     return options[opt - 1][1]
 
 
-def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api):
+def choose_upload_log_host(
+    default, check_default, show_ota, show_mqtt, show_api, purpose: str = None
+):
     options = []
     for port in get_serial_ports():
         options.append((f"{port.path} ({port.description})", port.path))
@@ -80,7 +87,7 @@ def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api
         options.append((f"Over The Air ({CORE.address})", CORE.address))
         if default == "OTA":
             return CORE.address
-    if show_mqtt and "mqtt" in CORE.config:
+    if show_mqtt and CONF_MQTT in CORE.config:
         options.append((f"MQTT ({CORE.config['mqtt'][CONF_BROKER]})", "MQTT"))
         if default == "OTA":
             return "MQTT"
@@ -88,7 +95,7 @@ def choose_upload_log_host(default, check_default, show_ota, show_mqtt, show_api
         return default
     if check_default is not None and check_default in [opt[1] for opt in options]:
         return check_default
-    return choose_prompt(options)
+    return choose_prompt(options, purpose=purpose)
 
 
 def get_port_type(port):
@@ -152,6 +159,8 @@ def run_miniterm(config, port):
         _LOGGER.error("Could not connect to serial port %s", port)
         return 1
 
+    return 0
+
 
 def wrap_to_code(name, comp):
     coro = coroutine(comp.to_code)
@@ -254,8 +263,7 @@ def upload_using_esptool(config, port):
         if os.environ.get("ESPHOME_USE_SUBPROCESS") is None:
             import esptool
 
-            # pylint: disable=protected-access
+            return run_external_command(esptool.main, *cmd)  # pylint: disable=no-member
-            return run_external_command(esptool._main, *cmd)
 
         return run_external_process(*cmd)
 
@@ -287,17 +295,30 @@ def upload_program(config, args, host):
 
         return 1  # Unknown target platform
 
-    from esphome import espota2
-
     if CONF_OTA not in config:
         raise EsphomeError(
             "Cannot upload Over the Air as the config does not include the ota: "
             "component"
         )
 
+    from esphome import espota2
+
     ota_conf = config[CONF_OTA]
     remote_port = ota_conf[CONF_PORT]
     password = ota_conf.get(CONF_PASSWORD, "")
+
+    if (
+        get_port_type(host) == "MQTT" or config[CONF_MDNS][CONF_DISABLED]
+    ) and CONF_MQTT in config:
+        from esphome import mqtt
+
+        host = mqtt.get_esphome_device_ip(
+            config, args.username, args.password, args.client_id
+        )
+
+    if getattr(args, "file", None) is not None:
+        return espota2.run_ota(host, remote_port, password, args.file)
+
     return espota2.run_ota(host, remote_port, password, CORE.firmware_bin)
 
 
@@ -307,6 +328,13 @@ def show_logs(config, args, port):
     if get_port_type(port) == "SERIAL":
         return run_miniterm(config, port)
     if get_port_type(port) == "NETWORK" and "api" in config:
+        if config[CONF_MDNS][CONF_DISABLED] and CONF_MQTT in config:
+            from esphome import mqtt
+
+            port = mqtt.get_esphome_device_ip(
+                config, args.username, args.password, args.client_id
+            )
+
         from esphome.components.api.client import run_logs
 
         return run_logs(config, port)
@@ -338,7 +366,7 @@ def command_config(args, config):
     _LOGGER.info("Configuration is valid!")
     if not CORE.verbose:
         config = strip_default_ids(config)
-    safe_print(yaml_util.dump(config))
+    safe_print(yaml_util.dump(config, args.show_secrets))
     return 0
 
 
@@ -371,6 +399,7 @@ def command_upload(args, config):
         show_ota=True,
         show_mqtt=False,
         show_api=False,
+        purpose="uploading",
     )
     exit_code = upload_program(config, args, port)
     if exit_code != 0:
@@ -379,6 +408,15 @@ def command_upload(args, config):
     return 0
 
 
+def command_discover(args, config):
+    if "mqtt" in config:
+        from esphome import mqtt
+
+        return mqtt.show_discover(config, args.username, args.password, args.client_id)
+
+    raise EsphomeError("No discover method configured (mqtt)")
+
+
 def command_logs(args, config):
     port = choose_upload_log_host(
         default=args.device,
@@ -386,6 +424,7 @@ def command_logs(args, config):
         show_ota=False,
         show_mqtt=True,
         show_api=True,
+        purpose="logging",
     )
     return show_logs(config, args, port)
 
@@ -404,6 +443,7 @@ def command_run(args, config):
         show_ota=True,
         show_mqtt=False,
         show_api=True,
+        purpose="uploading",
     )
     exit_code = upload_program(config, args, port)
     if exit_code != 0:
@@ -417,6 +457,7 @@ def command_run(args, config):
         show_ota=False,
         show_mqtt=True,
         show_api=True,
+        purpose="logging",
     )
     return show_logs(config, args, port)
 
@@ -620,6 +661,7 @@ POST_CONFIG_ACTIONS = {
     "clean": command_clean,
     "idedata": command_idedata,
     "rename": command_rename,
+    "discover": command_discover,
 }
 
 
@@ -664,6 +706,9 @@ def parse_args(argv):
     parser_config.add_argument(
         "configuration", help="Your YAML configuration file(s).", nargs="+"
     )
+    parser_config.add_argument(
+        "--show-secrets", help="Show secrets in output.", action="store_true"
+    )
 
     parser_compile = subparsers.add_parser(
         "compile", help="Read the configuration and compile a program."
@@ -687,6 +732,10 @@ def parse_args(argv):
         "--device",
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
+    parser_upload.add_argument(
+        "--file",
+        help="Manually specify the binary file to upload.",
+    )
 
     parser_logs = subparsers.add_parser(
         "logs",
@@ -701,6 +750,15 @@ def parse_args(argv):
         help="Manually specify the serial port/address to use, for example /dev/ttyUSB0.",
     )
 
+    parser_discover = subparsers.add_parser(
+        "discover",
+        help="Validate the configuration and show all discovered devices.",
+        parents=[mqtt_options],
+    )
+    parser_discover.add_argument(
+        "configuration", help="Your YAML configuration file.", nargs=1
+    )
+
     parser_run = subparsers.add_parser(
         "run",
         help="Validate the configuration, create a binary, upload it, and start logs.",
@@ -922,6 +980,8 @@ def run_esphome(argv):
             _LOGGER.error(e, exc_info=args.verbose)
             return 1
 
+    _LOGGER.info("ESPHome %s", const.__version__)
+
     for conf_path in args.configuration:
         if any(os.path.basename(conf_path) == x for x in SECRETS_FILES):
             _LOGGER.warning("Skipping secrets file %s", conf_path)

esphome/automation.py

@@ -254,7 +254,11 @@ async def repeat_action_to_code(config, action_id, template_arg, args):
     var = cg.new_Pvariable(action_id, template_arg)
     count_template = await cg.templatable(config[CONF_COUNT], args, cg.uint32)
     cg.add(var.set_count(count_template))
-    actions = await build_action_list(config[CONF_THEN], template_arg, args)
+    actions = await build_action_list(
+        config[CONF_THEN],
+        cg.TemplateArguments(cg.uint32, *template_arg.args),
+        [(cg.uint32, "iteration"), *args],
+    )
     cg.add(var.add_then(actions))
     return var
 

esphome/codegen.py

@@ -47,6 +47,7 @@ from esphome.cpp_helpers import (  # noqa
     build_registry_list,
     extract_registry_entry_config,
     register_parented,
+    past_safe_mode,
 )
 from esphome.cpp_types import (  # noqa
     global_ns,
@@ -63,6 +64,7 @@ from esphome.cpp_types import (  # noqa
     uint16,
     uint32,
     uint64,
+    int16,
     int32,
     int64,
     size_t,

esphome/components/a4988/a4988.cpp

@@ -46,6 +46,7 @@ void A4988::loop() {
     return;
 
   this->dir_pin_->digital_write(dir == 1);
+  delayMicroseconds(50);
   this->step_pin_->digital_write(true);
   delayMicroseconds(5);
   this->step_pin_->digital_write(false);

esphome/components/absolute_humidity/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@DAVe3283"]

esphome/components/absolute_humidity/absolute_humidity.cpp

@@ -0,0 +1,182 @@
+#include "esphome/core/log.h"
+#include "absolute_humidity.h"
+
+namespace esphome {
+namespace absolute_humidity {
+
+static const char *const TAG = "absolute_humidity.sensor";
+
+void AbsoluteHumidityComponent::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up absolute humidity '%s'...", this->get_name().c_str());
+
+  ESP_LOGD(TAG, "  Added callback for temperature '%s'", this->temperature_sensor_->get_name().c_str());
+  this->temperature_sensor_->add_on_state_callback([this](float state) { this->temperature_callback_(state); });
+  if (this->temperature_sensor_->has_state()) {
+    this->temperature_callback_(this->temperature_sensor_->get_state());
+  }
+
+  ESP_LOGD(TAG, "  Added callback for relative humidity '%s'", this->humidity_sensor_->get_name().c_str());
+  this->humidity_sensor_->add_on_state_callback([this](float state) { this->humidity_callback_(state); });
+  if (this->humidity_sensor_->has_state()) {
+    this->humidity_callback_(this->humidity_sensor_->get_state());
+  }
+}
+
+void AbsoluteHumidityComponent::dump_config() {
+  LOG_SENSOR("", "Absolute Humidity", this);
+
+  switch (this->equation_) {
+    case BUCK:
+      ESP_LOGCONFIG(TAG, "Saturation Vapor Pressure Equation: Buck");
+      break;
+    case TETENS:
+      ESP_LOGCONFIG(TAG, "Saturation Vapor Pressure Equation: Tetens");
+      break;
+    case WOBUS:
+      ESP_LOGCONFIG(TAG, "Saturation Vapor Pressure Equation: Wobus");
+      break;
+    default:
+      ESP_LOGE(TAG, "Invalid saturation vapor pressure equation selection!");
+      break;
+  }
+
+  ESP_LOGCONFIG(TAG, "Sources");
+  ESP_LOGCONFIG(TAG, "  Temperature: '%s'", this->temperature_sensor_->get_name().c_str());
+  ESP_LOGCONFIG(TAG, "  Relative Humidity: '%s'", this->humidity_sensor_->get_name().c_str());
+}
+
+float AbsoluteHumidityComponent::get_setup_priority() const { return setup_priority::DATA; }
+
+void AbsoluteHumidityComponent::loop() {
+  if (!this->next_update_) {
+    return;
+  }
+  this->next_update_ = false;
+
+  // Ensure we have source data
+  const bool no_temperature = std::isnan(this->temperature_);
+  const bool no_humidity = std::isnan(this->humidity_);
+  if (no_temperature || no_humidity) {
+    if (no_temperature) {
+      ESP_LOGW(TAG, "No valid state from temperature sensor!");
+    }
+    if (no_humidity) {
+      ESP_LOGW(TAG, "No valid state from temperature sensor!");
+    }
+    ESP_LOGW(TAG, "Unable to calculate absolute humidity.");
+    this->publish_state(NAN);
+    this->status_set_warning();
+    return;
+  }
+
+  // Convert to desired units
+  const float temperature_c = this->temperature_;
+  const float temperature_k = temperature_c + 273.15;
+  const float hr = this->humidity_ / 100;
+
+  // Calculate saturation vapor pressure
+  float es;
+  switch (this->equation_) {
+    case BUCK:
+      es = es_buck(temperature_c);
+      break;
+    case TETENS:
+      es = es_tetens(temperature_c);
+      break;
+    case WOBUS:
+      es = es_wobus(temperature_c);
+      break;
+    default:
+      ESP_LOGE(TAG, "Invalid saturation vapor pressure equation selection!");
+      this->publish_state(NAN);
+      this->status_set_error();
+      return;
+  }
+  ESP_LOGD(TAG, "Saturation vapor pressure %f kPa", es);
+
+  // Calculate absolute humidity
+  const float absolute_humidity = vapor_density(es, hr, temperature_k);
+
+  // Publish absolute humidity
+  ESP_LOGD(TAG, "Publishing absolute humidity %f g/m³", absolute_humidity);
+  this->status_clear_warning();
+  this->publish_state(absolute_humidity);
+}
+
+// Buck equation (https://en.wikipedia.org/wiki/Arden_Buck_equation)
+// More accurate than Tetens in normal meteorologic conditions
+float AbsoluteHumidityComponent::es_buck(float temperature_c) {
+  float a, b, c, d;
+  if (temperature_c >= 0) {
+    a = 0.61121;
+    b = 18.678;
+    c = 234.5;
+    d = 257.14;
+  } else {
+    a = 0.61115;
+    b = 18.678;
+    c = 233.7;
+    d = 279.82;
+  }
+  return a * expf((b - (temperature_c / c)) * (temperature_c / (d + temperature_c)));
+}
+
+// Tetens equation (https://en.wikipedia.org/wiki/Tetens_equation)
+float AbsoluteHumidityComponent::es_tetens(float temperature_c) {
+  float a, b;
+  if (temperature_c >= 0) {
+    a = 17.27;
+    b = 237.3;
+  } else {
+    a = 21.875;
+    b = 265.5;
+  }
+  return 0.61078 * expf((a * temperature_c) / (temperature_c + b));
+}
+
+// Wobus equation
+// https://wahiduddin.net/calc/density_altitude.htm
+// https://wahiduddin.net/calc/density_algorithms.htm
+// Calculate the saturation vapor pressure (kPa)
+float AbsoluteHumidityComponent::es_wobus(float t) {
+  // THIS FUNCTION RETURNS THE SATURATION VAPOR PRESSURE ESW (MILLIBARS)
+  // OVER LIQUID WATER GIVEN THE TEMPERATURE T (CELSIUS). THE POLYNOMIAL
+  // APPROXIMATION BELOW IS DUE TO HERMAN WOBUS, A MATHEMATICIAN WHO
+  // WORKED AT THE NAVY WEATHER RESEARCH FACILITY, NORFOLK, VIRGINIA,
+  // BUT WHO IS NOW RETIRED. THE COEFFICIENTS OF THE POLYNOMIAL WERE
+  // CHOSEN TO FIT THE VALUES IN TABLE 94 ON PP. 351-353 OF THE SMITH-
+  // SONIAN METEOROLOGICAL TABLES BY ROLAND LIST (6TH EDITION). THE
+  // APPROXIMATION IS VALID FOR -50 < T < 100C.
+  //
+  //     Baker, Schlatter  17-MAY-1982     Original version.
+
+  const float c0 = +0.99999683e00;
+  const float c1 = -0.90826951e-02;
+  const float c2 = +0.78736169e-04;
+  const float c3 = -0.61117958e-06;
+  const float c4 = +0.43884187e-08;
+  const float c5 = -0.29883885e-10;
+  const float c6 = +0.21874425e-12;
+  const float c7 = -0.17892321e-14;
+  const float c8 = +0.11112018e-16;
+  const float c9 = -0.30994571e-19;
+  const float p = c0 + t * (c1 + t * (c2 + t * (c3 + t * (c4 + t * (c5 + t * (c6 + t * (c7 + t * (c8 + t * (c9)))))))));
+  return 0.61078 / pow(p, 8);
+}
+
+// From https://www.environmentalbiophysics.org/chalk-talk-how-to-calculate-absolute-humidity/
+// H/T to https://esphome.io/cookbook/bme280_environment.html
+// H/T to https://carnotcycle.wordpress.com/2012/08/04/how-to-convert-relative-humidity-to-absolute-humidity/
+float AbsoluteHumidityComponent::vapor_density(float es, float hr, float ta) {
+  // es = saturated vapor pressure (kPa)
+  // hr = relative humidity [0-1]
+  // ta = absolute temperature (K)
+
+  const float ea = hr * es * 1000;   // vapor pressure of the air (Pa)
+  const float mw = 18.01528;         // molar mass of water (g⋅mol⁻¹)
+  const float r = 8.31446261815324;  // molar gas constant (J⋅K⁻¹)
+  return (ea * mw) / (r * ta);
+}
+
+}  // namespace absolute_humidity
+}  // namespace esphome

esphome/components/absolute_humidity/absolute_humidity.h

@@ -0,0 +1,76 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/components/sensor/sensor.h"
+
+namespace esphome {
+namespace absolute_humidity {
+
+/// Enum listing all implemented saturation vapor pressure equations.
+enum SaturationVaporPressureEquation {
+  BUCK,
+  TETENS,
+  WOBUS,
+};
+
+/// This class implements calculation of absolute humidity from temperature and relative humidity.
+class AbsoluteHumidityComponent : public sensor::Sensor, public Component {
+ public:
+  AbsoluteHumidityComponent() = default;
+
+  void set_temperature_sensor(sensor::Sensor *temperature_sensor) { this->temperature_sensor_ = temperature_sensor; }
+  void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
+  void set_equation(SaturationVaporPressureEquation equation) { this->equation_ = equation; }
+
+  void setup() override;
+  void dump_config() override;
+  float get_setup_priority() const override;
+  void loop() override;
+
+ protected:
+  void temperature_callback_(float state) {
+    this->next_update_ = true;
+    this->temperature_ = state;
+  }
+  void humidity_callback_(float state) {
+    this->next_update_ = true;
+    this->humidity_ = state;
+  }
+
+  /** Buck equation for saturation vapor pressure in kPa.
+   *
+   * @param temperature_c Air temperature in °C.
+   */
+  static float es_buck(float temperature_c);
+  /** Tetens equation for saturation vapor pressure in kPa.
+   *
+   * @param temperature_c Air temperature in °C.
+   */
+  static float es_tetens(float temperature_c);
+  /** Wobus equation for saturation vapor pressure in kPa.
+   *
+   * @param temperature_c Air temperature in °C.
+   */
+  static float es_wobus(float temperature_c);
+
+  /** Calculate vapor density (absolute humidity) in g/m³.
+   *
+   * @param es Saturation vapor pressure in kPa.
+   * @param hr Relative humidity 0 to 1.
+   * @param ta Absolute temperature in K.
+   * @param heater_duration The duration in ms that the heater should turn on for when measuring.
+   */
+  static float vapor_density(float es, float hr, float ta);
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+
+  bool next_update_{false};
+
+  float temperature_{NAN};
+  float humidity_{NAN};
+  SaturationVaporPressureEquation equation_;
+};
+
+}  // namespace absolute_humidity
+}  // namespace esphome

esphome/components/absolute_humidity/sensor.py

@@ -0,0 +1,56 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor
+from esphome.const import (
+    CONF_HUMIDITY,
+    CONF_TEMPERATURE,
+    STATE_CLASS_MEASUREMENT,
+    CONF_EQUATION,
+    ICON_WATER,
+    UNIT_GRAMS_PER_CUBIC_METER,
+)
+
+absolute_humidity_ns = cg.esphome_ns.namespace("absolute_humidity")
+AbsoluteHumidityComponent = absolute_humidity_ns.class_(
+    "AbsoluteHumidityComponent", sensor.Sensor, cg.Component
+)
+
+SaturationVaporPressureEquation = absolute_humidity_ns.enum(
+    "SaturationVaporPressureEquation"
+)
+EQUATION = {
+    "BUCK": SaturationVaporPressureEquation.BUCK,
+    "TETENS": SaturationVaporPressureEquation.TETENS,
+    "WOBUS": SaturationVaporPressureEquation.WOBUS,
+}
+
+CONFIG_SCHEMA = (
+    sensor.sensor_schema(
+        unit_of_measurement=UNIT_GRAMS_PER_CUBIC_METER,
+        icon=ICON_WATER,
+        accuracy_decimals=2,
+        state_class=STATE_CLASS_MEASUREMENT,
+    )
+    .extend(
+        {
+            cv.GenerateID(): cv.declare_id(AbsoluteHumidityComponent),
+            cv.Required(CONF_TEMPERATURE): cv.use_id(sensor.Sensor),
+            cv.Required(CONF_HUMIDITY): cv.use_id(sensor.Sensor),
+            cv.Optional(CONF_EQUATION, default="WOBUS"): cv.enum(EQUATION, upper=True),
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+)
+
+
+async def to_code(config):
+    var = await sensor.new_sensor(config)
+    await cg.register_component(var, config)
+
+    temperature_sensor = await cg.get_variable(config[CONF_TEMPERATURE])
+    cg.add(var.set_temperature_sensor(temperature_sensor))
+
+    humidity_sensor = await cg.get_variable(config[CONF_HUMIDITY])
+    cg.add(var.set_humidity_sensor(humidity_sensor))
+
+    cg.add(var.set_equation(config[CONF_EQUATION]))

esphome/components/adc/__init__.py

@@ -1 +1,118 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome import pins
+from esphome.const import CONF_INPUT
+
+from esphome.core import CORE
+from esphome.components.esp32 import get_esp32_variant
+from esphome.components.esp32.const import (
+    VARIANT_ESP32,
+    VARIANT_ESP32C3,
+    VARIANT_ESP32H2,
+    VARIANT_ESP32S2,
+    VARIANT_ESP32S3,
+)
+
 CODEOWNERS = ["@esphome/core"]
+
+ATTENUATION_MODES = {
+    "0db": cg.global_ns.ADC_ATTEN_DB_0,
+    "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
+    "6db": cg.global_ns.ADC_ATTEN_DB_6,
+    "11db": cg.global_ns.ADC_ATTEN_DB_11,
+    "auto": "auto",
+}
+
+adc1_channel_t = cg.global_ns.enum("adc1_channel_t")
+
+# From https://github.com/espressif/esp-idf/blob/master/components/driver/include/driver/adc_common.h
+# pin to adc1 channel mapping
+ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
+    VARIANT_ESP32: {
+        36: adc1_channel_t.ADC1_CHANNEL_0,
+        37: adc1_channel_t.ADC1_CHANNEL_1,
+        38: adc1_channel_t.ADC1_CHANNEL_2,
+        39: adc1_channel_t.ADC1_CHANNEL_3,
+        32: adc1_channel_t.ADC1_CHANNEL_4,
+        33: adc1_channel_t.ADC1_CHANNEL_5,
+        34: adc1_channel_t.ADC1_CHANNEL_6,
+        35: adc1_channel_t.ADC1_CHANNEL_7,
+    },
+    VARIANT_ESP32S2: {
+        1: adc1_channel_t.ADC1_CHANNEL_0,
+        2: adc1_channel_t.ADC1_CHANNEL_1,
+        3: adc1_channel_t.ADC1_CHANNEL_2,
+        4: adc1_channel_t.ADC1_CHANNEL_3,
+        5: adc1_channel_t.ADC1_CHANNEL_4,
+        6: adc1_channel_t.ADC1_CHANNEL_5,
+        7: adc1_channel_t.ADC1_CHANNEL_6,
+        8: adc1_channel_t.ADC1_CHANNEL_7,
+        9: adc1_channel_t.ADC1_CHANNEL_8,
+        10: adc1_channel_t.ADC1_CHANNEL_9,
+    },
+    VARIANT_ESP32S3: {
+        1: adc1_channel_t.ADC1_CHANNEL_0,
+        2: adc1_channel_t.ADC1_CHANNEL_1,
+        3: adc1_channel_t.ADC1_CHANNEL_2,
+        4: adc1_channel_t.ADC1_CHANNEL_3,
+        5: adc1_channel_t.ADC1_CHANNEL_4,
+        6: adc1_channel_t.ADC1_CHANNEL_5,
+        7: adc1_channel_t.ADC1_CHANNEL_6,
+        8: adc1_channel_t.ADC1_CHANNEL_7,
+        9: adc1_channel_t.ADC1_CHANNEL_8,
+        10: adc1_channel_t.ADC1_CHANNEL_9,
+    },
+    VARIANT_ESP32C3: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+    },
+    VARIANT_ESP32H2: {
+        0: adc1_channel_t.ADC1_CHANNEL_0,
+        1: adc1_channel_t.ADC1_CHANNEL_1,
+        2: adc1_channel_t.ADC1_CHANNEL_2,
+        3: adc1_channel_t.ADC1_CHANNEL_3,
+        4: adc1_channel_t.ADC1_CHANNEL_4,
+    },
+}
+
+
+def validate_adc_pin(value):
+    if str(value).upper() == "VCC":
+        return cv.only_on_esp8266("VCC")
+
+    if str(value).upper() == "TEMPERATURE":
+        return cv.only_on_rp2040("TEMPERATURE")
+
+    if CORE.is_esp32:
+        value = pins.internal_gpio_input_pin_number(value)
+        variant = get_esp32_variant()
+        if variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL:
+            raise cv.Invalid(f"This ESP32 variant ({variant}) is not supported")
+
+        if value not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]:
+            raise cv.Invalid(f"{variant} doesn't support ADC on this pin")
+        return pins.internal_gpio_input_pin_schema(value)
+
+    if CORE.is_esp8266:
+        from esphome.components.esp8266.gpio import CONF_ANALOG
+
+        value = pins.internal_gpio_pin_number({CONF_ANALOG: True, CONF_INPUT: True})(
+            value
+        )
+
+        if value != 17:  # A0
+            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC.")
+        return pins.gpio_pin_schema(
+            {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
+        )(value)
+
+    if CORE.is_rp2040:
+        value = pins.internal_gpio_input_pin_number(value)
+        if value not in (26, 27, 28, 29):
+            raise cv.Invalid("RP2040: Only pins 26, 27, 28 and 29 support ADC.")
+        return pins.internal_gpio_input_pin_schema(value)
+
+    raise NotImplementedError

esphome/components/adc/adc_sensor.cpp

@@ -11,6 +11,10 @@ ADC_MODE(ADC_VCC)
 #endif
 #endif
 
+#ifdef USE_RP2040
+#include <hardware/adc.h>
+#endif
+
 namespace esphome {
 namespace adc {
 
@@ -32,9 +36,13 @@ static const int ADC_MAX = (1 << SOC_ADC_RTC_MAX_BITWIDTH) - 1;    // 4095 (12 b
 static const int ADC_HALF = (1 << SOC_ADC_RTC_MAX_BITWIDTH) >> 1;  // 2048 (12 bit) or 4096 (13 bit)
 #endif
 
-void ADCSensor::setup() {
+#ifdef USE_RP2040
+extern "C"
+#endif
+    void
+    ADCSensor::setup() {
   ESP_LOGCONFIG(TAG, "Setting up ADC '%s'...", this->get_name().c_str());
-#ifndef USE_ADC_SENSOR_VCC
+#if !defined(USE_ADC_SENSOR_VCC) && !defined(USE_RP2040)
   pin_->setup();
 #endif
 
@@ -63,6 +71,16 @@ void ADCSensor::setup() {
   }
 
 #endif  // USE_ESP32
+
+#ifdef USE_RP2040
+  static bool initialized = false;
+  if (!initialized) {
+    adc_init();
+    initialized = true;
+  }
+#endif
+
+  ESP_LOGCONFIG(TAG, "ADC '%s' setup finished!", this->get_name().c_str());
 }
 
 void ADCSensor::dump_config() {
@@ -98,6 +116,13 @@ void ADCSensor::dump_config() {
     }
   }
 #endif  // USE_ESP32
+#ifdef USE_RP2040
+  if (this->is_temperature_) {
+    ESP_LOGCONFIG(TAG, "  Pin: Temperature");
+  } else {
+    LOG_PIN("  Pin: ", pin_);
+  }
+#endif
   LOG_UPDATE_INTERVAL(this);
 }
 
@@ -175,6 +200,29 @@ float ADCSensor::sample() {
 }
 #endif  // USE_ESP32
 
+#ifdef USE_RP2040
+float ADCSensor::sample() {
+  if (this->is_temperature_) {
+    adc_set_temp_sensor_enabled(true);
+    delay(1);
+    adc_select_input(4);
+  } else {
+    uint8_t pin = this->pin_->get_pin();
+    adc_gpio_init(pin);
+    adc_select_input(pin - 26);
+  }
+
+  int raw = adc_read();
+  if (this->is_temperature_) {
+    adc_set_temp_sensor_enabled(false);
+  }
+  if (output_raw_) {
+    return raw;
+  }
+  return raw * 3.3f / 4096.0f;
+}
+#endif
+
 #ifdef USE_ESP8266
 std::string ADCSensor::unique_id() { return get_mac_address() + "-adc"; }
 #endif

esphome/components/adc/adc_sensor.h

@@ -38,10 +38,18 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   std::string unique_id() override;
 #endif
 
+#ifdef USE_RP2040
+  void set_is_temperature() { is_temperature_ = true; }
+#endif
+
  protected:
   InternalGPIOPin *pin_;
   bool output_raw_{false};
 
+#ifdef USE_RP2040
+  bool is_temperature_{false};
+#endif
+
 #ifdef USE_ESP32
   adc_atten_t attenuation_{ADC_ATTEN_DB_0};
   adc1_channel_t channel_{};

esphome/components/adc/sensor.py

@@ -1,124 +1,27 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import pins
 from esphome.components import sensor, voltage_sampler
+from esphome.components.esp32 import get_esp32_variant
 from esphome.const import (
     CONF_ATTENUATION,
-    CONF_RAW,
     CONF_ID,
-    CONF_INPUT,
     CONF_NUMBER,
     CONF_PIN,
+    CONF_RAW,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
 )
 from esphome.core import CORE
-from esphome.components.esp32 import get_esp32_variant
+
-from esphome.components.esp32.const import (
+from . import (
-    VARIANT_ESP32,
+    ATTENUATION_MODES,
-    VARIANT_ESP32C3,
+    ESP32_VARIANT_ADC1_PIN_TO_CHANNEL,
-    VARIANT_ESP32H2,
+    validate_adc_pin,
-    VARIANT_ESP32S2,
-    VARIANT_ESP32S3,
 )
 
-
 AUTO_LOAD = ["voltage_sampler"]
 
-ATTENUATION_MODES = {
-    "0db": cg.global_ns.ADC_ATTEN_DB_0,
-    "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
-    "6db": cg.global_ns.ADC_ATTEN_DB_6,
-    "11db": cg.global_ns.ADC_ATTEN_DB_11,
-    "auto": "auto",
-}
-
-adc1_channel_t = cg.global_ns.enum("adc1_channel_t")
-
-# From https://github.com/espressif/esp-idf/blob/master/components/driver/include/driver/adc_common.h
-# pin to adc1 channel mapping
-ESP32_VARIANT_ADC1_PIN_TO_CHANNEL = {
-    VARIANT_ESP32: {
-        36: adc1_channel_t.ADC1_CHANNEL_0,
-        37: adc1_channel_t.ADC1_CHANNEL_1,
-        38: adc1_channel_t.ADC1_CHANNEL_2,
-        39: adc1_channel_t.ADC1_CHANNEL_3,
-        32: adc1_channel_t.ADC1_CHANNEL_4,
-        33: adc1_channel_t.ADC1_CHANNEL_5,
-        34: adc1_channel_t.ADC1_CHANNEL_6,
-        35: adc1_channel_t.ADC1_CHANNEL_7,
-    },
-    VARIANT_ESP32S2: {
-        1: adc1_channel_t.ADC1_CHANNEL_0,
-        2: adc1_channel_t.ADC1_CHANNEL_1,
-        3: adc1_channel_t.ADC1_CHANNEL_2,
-        4: adc1_channel_t.ADC1_CHANNEL_3,
-        5: adc1_channel_t.ADC1_CHANNEL_4,
-        6: adc1_channel_t.ADC1_CHANNEL_5,
-        7: adc1_channel_t.ADC1_CHANNEL_6,
-        8: adc1_channel_t.ADC1_CHANNEL_7,
-        9: adc1_channel_t.ADC1_CHANNEL_8,
-        10: adc1_channel_t.ADC1_CHANNEL_9,
-    },
-    VARIANT_ESP32S3: {
-        1: adc1_channel_t.ADC1_CHANNEL_0,
-        2: adc1_channel_t.ADC1_CHANNEL_1,
-        3: adc1_channel_t.ADC1_CHANNEL_2,
-        4: adc1_channel_t.ADC1_CHANNEL_3,
-        5: adc1_channel_t.ADC1_CHANNEL_4,
-        6: adc1_channel_t.ADC1_CHANNEL_5,
-        7: adc1_channel_t.ADC1_CHANNEL_6,
-        8: adc1_channel_t.ADC1_CHANNEL_7,
-        9: adc1_channel_t.ADC1_CHANNEL_8,
-        10: adc1_channel_t.ADC1_CHANNEL_9,
-    },
-    VARIANT_ESP32C3: {
-        0: adc1_channel_t.ADC1_CHANNEL_0,
-        1: adc1_channel_t.ADC1_CHANNEL_1,
-        2: adc1_channel_t.ADC1_CHANNEL_2,
-        3: adc1_channel_t.ADC1_CHANNEL_3,
-        4: adc1_channel_t.ADC1_CHANNEL_4,
-    },
-    VARIANT_ESP32H2: {
-        0: adc1_channel_t.ADC1_CHANNEL_0,
-        1: adc1_channel_t.ADC1_CHANNEL_1,
-        2: adc1_channel_t.ADC1_CHANNEL_2,
-        3: adc1_channel_t.ADC1_CHANNEL_3,
-        4: adc1_channel_t.ADC1_CHANNEL_4,
-    },
-}
-
-
-def validate_adc_pin(value):
-    if str(value).upper() == "VCC":
-        return cv.only_on_esp8266("VCC")
-
-    if CORE.is_esp32:
-        value = pins.internal_gpio_input_pin_number(value)
-        variant = get_esp32_variant()
-        if variant not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL:
-            raise cv.Invalid(f"This ESP32 variant ({variant}) is not supported")
-
-        if value not in ESP32_VARIANT_ADC1_PIN_TO_CHANNEL[variant]:
-            raise cv.Invalid(f"{variant} doesn't support ADC on this pin")
-        return pins.internal_gpio_input_pin_schema(value)
-
-    if CORE.is_esp8266:
-        from esphome.components.esp8266.gpio import CONF_ANALOG
-
-        value = pins.internal_gpio_pin_number({CONF_ANALOG: True, CONF_INPUT: True})(
-            value
-        )
-
-        if value != 17:  # A0
-            raise cv.Invalid("ESP8266: Only pin A0 (GPIO17) supports ADC.")
-        return pins.gpio_pin_schema(
-            {CONF_ANALOG: True, CONF_INPUT: True}, internal=True
-        )(value)
-
-    raise NotImplementedError
-
 
 def validate_config(config):
     if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
@@ -160,6 +63,8 @@ async def to_code(config):
 
     if config[CONF_PIN] == "VCC":
         cg.add_define("USE_ADC_SENSOR_VCC")
+    elif config[CONF_PIN] == "TEMPERATURE":
+        cg.add(var.set_is_temperature())
     else:
         pin = await cg.gpio_pin_expression(config[CONF_PIN])
         cg.add(var.set_pin(pin))

esphome/components/adc128s102/sensor/__init__.py

@@ -16,13 +16,16 @@ ADC128S102Sensor = adc128s102_ns.class_(
 )
 CONF_ADC128S102_ID = "adc128s102_id"
 
-CONFIG_SCHEMA = sensor.SENSOR_SCHEMA.extend(
+CONFIG_SCHEMA = (
-    {
+    sensor.sensor_schema(ADC128S102Sensor)
-        cv.GenerateID(): cv.declare_id(ADC128S102Sensor),
+    .extend(
-        cv.GenerateID(CONF_ADC128S102_ID): cv.use_id(ADC128S102),
+        {
-        cv.Required(CONF_CHANNEL): cv.int_range(min=0, max=7),
+            cv.GenerateID(CONF_ADC128S102_ID): cv.use_id(ADC128S102),
-    }
+            cv.Required(CONF_CHANNEL): cv.int_range(min=0, max=7),
-).extend(cv.polling_component_schema("60s"))
+        }
+    )
+    .extend(cv.polling_component_schema("60s"))
+)
 
 
 async def to_code(config):

esphome/components/addressable_light/addressable_light_display.h

@@ -5,6 +5,8 @@
 #include "esphome/components/display/display_buffer.h"
 #include "esphome/components/light/addressable_light.h"
 
+#include <vector>
+
 namespace esphome {
 namespace addressable_light {
 

esphome/components/ade7953/ade7953.h

@@ -5,6 +5,8 @@
 #include "esphome/components/i2c/i2c.h"
 #include "esphome/components/sensor/sensor.h"
 
+#include <vector>
+
 namespace esphome {
 namespace ade7953 {
 

esphome/components/ads1115/ads1115.cpp

@@ -9,7 +9,7 @@ static const char *const TAG = "ads1115";
 static const uint8_t ADS1115_REGISTER_CONVERSION = 0x00;
 static const uint8_t ADS1115_REGISTER_CONFIG = 0x01;
 
-static const uint8_t ADS1115_DATA_RATE_860_SPS = 0b111;
+static const uint8_t ADS1115_DATA_RATE_860_SPS = 0b111;  // 3300_SPS for ADS1015
 
 void ADS1115Component::setup() {
   ESP_LOGCONFIG(TAG, "Setting up ADS1115...");
@@ -18,6 +18,9 @@ void ADS1115Component::setup() {
     this->mark_failed();
     return;
   }
+
+  ESP_LOGCONFIG(TAG, "Configuring ADS1115...");
+
   uint16_t config = 0;
   // Clear single-shot bit
   //        0b0xxxxxxxxxxxxxxx
@@ -77,6 +80,7 @@ void ADS1115Component::dump_config() {
     LOG_SENSOR("  ", "Sensor", sensor);
     ESP_LOGCONFIG(TAG, "    Multiplexer: %u", sensor->get_multiplexer());
     ESP_LOGCONFIG(TAG, "    Gain: %u", sensor->get_gain());
+    ESP_LOGCONFIG(TAG, "    Resolution: %u", sensor->get_resolution());
   }
 }
 float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
@@ -127,27 +131,45 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
     this->status_set_warning();
     return NAN;
   }
+
+  if (sensor->get_resolution() == ADS1015_12_BITS) {
+    bool negative = (raw_conversion >> 15) == 1;
+
+    // shift raw_conversion as it's only 12-bits, left justified
+    raw_conversion = raw_conversion >> (16 - ADS1015_12_BITS);
+
+    // check if number was negative in order to keep the sign
+    if (negative) {
+      // the number was negative
+      // 1) set the negative bit back
+      raw_conversion |= 0x8000;
+      // 2) reset the former (shifted) negative bit
+      raw_conversion &= 0xF7FF;
+    }
+  }
+
   auto signed_conversion = static_cast<int16_t>(raw_conversion);
 
   float millivolts;
+  float divider = (sensor->get_resolution() == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
   switch (sensor->get_gain()) {
     case ADS1115_GAIN_6P144:
-      millivolts = signed_conversion * 0.187500f;
+      millivolts = (signed_conversion * 6144) / divider;
       break;
     case ADS1115_GAIN_4P096:
-      millivolts = signed_conversion * 0.125000f;
+      millivolts = (signed_conversion * 4096) / divider;
       break;
     case ADS1115_GAIN_2P048:
-      millivolts = signed_conversion * 0.062500f;
+      millivolts = (signed_conversion * 2048) / divider;
       break;
     case ADS1115_GAIN_1P024:
-      millivolts = signed_conversion * 0.031250f;
+      millivolts = (signed_conversion * 1024) / divider;
       break;
     case ADS1115_GAIN_0P512:
-      millivolts = signed_conversion * 0.015625f;
+      millivolts = (signed_conversion * 512) / divider;
       break;
     case ADS1115_GAIN_0P256:
-      millivolts = signed_conversion * 0.007813f;
+      millivolts = (signed_conversion * 256) / divider;
       break;
     default:
       millivolts = NAN;

esphome/components/ads1115/ads1115.h

@@ -5,6 +5,8 @@
 #include "esphome/components/i2c/i2c.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
 
+#include <vector>
+
 namespace esphome {
 namespace ads1115 {
 
@@ -28,6 +30,11 @@ enum ADS1115Gain {
   ADS1115_GAIN_0P256 = 0b101,
 };
 
+enum ADS1115Resolution {
+  ADS1115_16_BITS = 16,
+  ADS1015_12_BITS = 12,
+};
+
 class ADS1115Sensor;
 
 class ADS1115Component : public Component, public i2c::I2CDevice {
@@ -56,15 +63,17 @@ class ADS1115Sensor : public sensor::Sensor, public PollingComponent, public vol
   void update() override;
   void set_multiplexer(ADS1115Multiplexer multiplexer) { multiplexer_ = multiplexer; }
   void set_gain(ADS1115Gain gain) { gain_ = gain; }
-
+  void set_resolution(ADS1115Resolution resolution) { resolution_ = resolution; }
   float sample() override;
   uint8_t get_multiplexer() const { return multiplexer_; }
   uint8_t get_gain() const { return gain_; }
+  uint8_t get_resolution() const { return resolution_; }
 
  protected:
   ADS1115Component *parent_;
   ADS1115Multiplexer multiplexer_;
   ADS1115Gain gain_;
+  ADS1115Resolution resolution_;
 };
 
 }  // namespace ads1115

esphome/components/ads1115/sensor.py

@@ -4,6 +4,7 @@ from esphome.components import sensor, voltage_sampler
 from esphome.const import (
     CONF_GAIN,
     CONF_MULTIPLEXER,
+    CONF_RESOLUTION,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     UNIT_VOLT,
@@ -35,6 +36,12 @@ GAIN = {
     "0.256": ADS1115Gain.ADS1115_GAIN_0P256,
 }
 
+ADS1115Resolution = ads1115_ns.enum("ADS1115Resolution")
+RESOLUTION = {
+    "16_BITS": ADS1115Resolution.ADS1115_16_BITS,
+    "12_BITS": ADS1115Resolution.ADS1015_12_BITS,
+}
+
 
 def validate_gain(value):
     if isinstance(value, float):
@@ -63,6 +70,9 @@ CONFIG_SCHEMA = (
             cv.GenerateID(CONF_ADS1115_ID): cv.use_id(ADS1115Component),
             cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
             cv.Required(CONF_GAIN): validate_gain,
+            cv.Optional(CONF_RESOLUTION, default="16_BITS"): cv.enum(
+                RESOLUTION, upper=True, space="_"
+            ),
         }
     )
     .extend(cv.polling_component_schema("60s"))
@@ -77,5 +87,6 @@ async def to_code(config):
 
     cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
     cg.add(var.set_gain(config[CONF_GAIN]))
+    cg.add(var.set_resolution(config[CONF_RESOLUTION]))
 
     cg.add(paren.register_sensor(var))

esphome/components/aht10/aht10.cpp

@@ -122,8 +122,9 @@ void AHT10Component::update() {
     this->temperature_sensor_->publish_state(temperature);
   }
   if (this->humidity_sensor_ != nullptr) {
-    if (std::isnan(humidity))
+    if (std::isnan(humidity)) {
       ESP_LOGW(TAG, "Invalid humidity! Sensor reported 0%% Hum");
+    }
     this->humidity_sensor_->publish_state(humidity);
   }
   this->status_clear_warning();

esphome/components/airthings_wave_base/__init__.py

@@ -0,0 +1,83 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import sensor, ble_client
+
+from esphome.const import (
+    DEVICE_CLASS_HUMIDITY,
+    DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_PRESSURE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_PERCENT,
+    UNIT_CELSIUS,
+    UNIT_HECTOPASCAL,
+    CONF_HUMIDITY,
+    CONF_TVOC,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+    UNIT_PARTS_PER_BILLION,
+    ICON_RADIATOR,
+)
+
+CODEOWNERS = ["@ncareau", "@jeromelaban"]
+
+DEPENDENCIES = ["ble_client"]
+
+airthings_wave_base_ns = cg.esphome_ns.namespace("airthings_wave_base")
+AirthingsWaveBase = airthings_wave_base_ns.class_(
+    "AirthingsWaveBase", cg.PollingComponent, ble_client.BLEClientNode
+)
+
+
+BASE_SCHEMA = (
+    sensor.SENSOR_SCHEMA.extend(
+        {
+            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PERCENT,
+                device_class=DEVICE_CLASS_HUMIDITY,
+                state_class=STATE_CLASS_MEASUREMENT,
+                accuracy_decimals=0,
+            ),
+            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_CELSIUS,
+                accuracy_decimals=2,
+                device_class=DEVICE_CLASS_TEMPERATURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
+                unit_of_measurement=UNIT_HECTOPASCAL,
+                accuracy_decimals=1,
+                device_class=DEVICE_CLASS_PRESSURE,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+            cv.Optional(CONF_TVOC): sensor.sensor_schema(
+                unit_of_measurement=UNIT_PARTS_PER_BILLION,
+                icon=ICON_RADIATOR,
+                accuracy_decimals=0,
+                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS_PARTS,
+                state_class=STATE_CLASS_MEASUREMENT,
+            ),
+        }
+    )
+    .extend(cv.polling_component_schema("5min"))
+    .extend(ble_client.BLE_CLIENT_SCHEMA)
+)
+
+
+async def wave_base_to_code(var, config):
+    await cg.register_component(var, config)
+
+    await ble_client.register_ble_node(var, config)
+
+    if CONF_HUMIDITY in config:
+        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
+        cg.add(var.set_humidity(sens))
+    if CONF_TEMPERATURE in config:
+        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
+        cg.add(var.set_temperature(sens))
+    if CONF_PRESSURE in config:
+        sens = await sensor.new_sensor(config[CONF_PRESSURE])
+        cg.add(var.set_pressure(sens))
+    if CONF_TVOC in config:
+        sens = await sensor.new_sensor(config[CONF_TVOC])
+        cg.add(var.set_tvoc(sens))

esphome/components/airthings_wave_base/airthings_wave_base.cpp

@@ -0,0 +1,83 @@
+#include "airthings_wave_base.h"
+
+#ifdef USE_ESP32
+
+namespace esphome {
+namespace airthings_wave_base {
+
+static const char *const TAG = "airthings_wave_base";
+
+void AirthingsWaveBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                                            esp_ble_gattc_cb_param_t *param) {
+  switch (event) {
+    case ESP_GATTC_OPEN_EVT: {
+      if (param->open.status == ESP_GATT_OK) {
+        ESP_LOGI(TAG, "Connected successfully!");
+      }
+      break;
+    }
+
+    case ESP_GATTC_DISCONNECT_EVT: {
+      ESP_LOGW(TAG, "Disconnected!");
+      break;
+    }
+
+    case ESP_GATTC_SEARCH_CMPL_EVT: {
+      this->handle_ = 0;
+      auto *chr = this->parent()->get_characteristic(this->service_uuid_, this->sensors_data_characteristic_uuid_);
+      if (chr == nullptr) {
+        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", this->service_uuid_.to_string().c_str(),
+                 this->sensors_data_characteristic_uuid_.to_string().c_str());
+        break;
+      }
+      this->handle_ = chr->handle;
+      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
+
+      this->request_read_values_();
+      break;
+    }
+
+    case ESP_GATTC_READ_CHAR_EVT: {
+      if (param->read.conn_id != this->parent()->get_conn_id())
+        break;
+      if (param->read.status != ESP_GATT_OK) {
+        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
+        break;
+      }
+      if (param->read.handle == this->handle_) {
+        this->read_sensors(param->read.value, param->read.value_len);
+      }
+      break;
+    }
+
+    default:
+      break;
+  }
+}
+
+bool AirthingsWaveBase::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
+
+void AirthingsWaveBase::update() {
+  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
+    if (!this->parent()->enabled) {
+      ESP_LOGW(TAG, "Reconnecting to device");
+      this->parent()->set_enabled(true);
+      this->parent()->connect();
+    } else {
+      ESP_LOGW(TAG, "Connection in progress");
+    }
+  }
+}
+
+void AirthingsWaveBase::request_read_values_() {
+  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
+                                        ESP_GATT_AUTH_REQ_NONE);
+  if (status) {
+    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
+  }
+}
+
+}  // namespace airthings_wave_base
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_base/airthings_wave_base.h

@@ -0,0 +1,50 @@
+#pragma once
+
+#ifdef USE_ESP32
+
+#include <esp_gattc_api.h>
+#include <algorithm>
+#include <iterator>
+#include "esphome/components/ble_client/ble_client.h"
+#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace airthings_wave_base {
+
+class AirthingsWaveBase : public PollingComponent, public ble_client::BLEClientNode {
+ public:
+  AirthingsWaveBase() = default;
+
+  void update() override;
+
+  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+                           esp_ble_gattc_cb_param_t *param) override;
+
+  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
+  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
+  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
+  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
+
+ protected:
+  bool is_valid_voc_value_(uint16_t voc);
+
+  virtual void read_sensors(uint8_t *value, uint16_t value_len) = 0;
+  void request_read_values_();
+
+  sensor::Sensor *temperature_sensor_{nullptr};
+  sensor::Sensor *humidity_sensor_{nullptr};
+  sensor::Sensor *pressure_sensor_{nullptr};
+  sensor::Sensor *tvoc_sensor_{nullptr};
+
+  uint16_t handle_;
+  esp32_ble_tracker::ESPBTUUID service_uuid_;
+  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
+};
+
+}  // namespace airthings_wave_base
+}  // namespace esphome
+
+#endif  // USE_ESP32

esphome/components/airthings_wave_mini/airthings_wave_mini.cpp

@@ -7,105 +7,47 @@ namespace airthings_wave_mini {
 
 static const char *const TAG = "airthings_wave_mini";
 
-void AirthingsWaveMini::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+void AirthingsWaveMini::read_sensors(uint8_t *raw_value, uint16_t value_len) {
-                                            esp_ble_gattc_cb_param_t *param) {
-  switch (event) {
-    case ESP_GATTC_OPEN_EVT: {
-      if (param->open.status == ESP_GATT_OK) {
-        ESP_LOGI(TAG, "Connected successfully!");
-      }
-      break;
-    }
-
-    case ESP_GATTC_DISCONNECT_EVT: {
-      ESP_LOGW(TAG, "Disconnected!");
-      break;
-    }
-
-    case ESP_GATTC_SEARCH_CMPL_EVT: {
-      this->handle_ = 0;
-      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
-      if (chr == nullptr) {
-        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
-                 sensors_data_characteristic_uuid_.to_string().c_str());
-        break;
-      }
-      this->handle_ = chr->handle;
-      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
-
-      request_read_values_();
-      break;
-    }
-
-    case ESP_GATTC_READ_CHAR_EVT: {
-      if (param->read.conn_id != this->parent()->get_conn_id())
-        break;
-      if (param->read.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
-        break;
-      }
-      if (param->read.handle == this->handle_) {
-        read_sensors_(param->read.value, param->read.value_len);
-      }
-      break;
-    }
-
-    default:
-      break;
-  }
-}
-
-void AirthingsWaveMini::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
   auto *value = (WaveMiniReadings *) raw_value;
 
   if (sizeof(WaveMiniReadings) <= value_len) {
-    this->humidity_sensor_->publish_state(value->humidity / 100.0f);
+    if (this->humidity_sensor_ != nullptr) {
-    this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+      this->humidity_sensor_->publish_state(value->humidity / 100.0f);
-    this->temperature_sensor_->publish_state(value->temperature / 100.0f - 273.15f);
+    }
-    if (is_valid_voc_value_(value->voc)) {
+
+    if (this->pressure_sensor_ != nullptr) {
+      this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+    }
+
+    if (this->temperature_sensor_ != nullptr) {
+      this->temperature_sensor_->publish_state(value->temperature / 100.0f - 273.15f);
+    }
+
+    if ((this->tvoc_sensor_ != nullptr) && this->is_valid_voc_value_(value->voc)) {
       this->tvoc_sensor_->publish_state(value->voc);
     }
 
     // This instance must not stay connected
     // so other clients can connect to it (e.g. the
     // mobile app).
-    parent()->set_enabled(false);
+    this->parent()->set_enabled(false);
-  }
-}
-
-bool AirthingsWaveMini::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
-
-void AirthingsWaveMini::update() {
-  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
-    if (!parent()->enabled) {
-      ESP_LOGW(TAG, "Reconnecting to device");
-      parent()->set_enabled(true);
-      parent()->connect();
-    } else {
-      ESP_LOGW(TAG, "Connection in progress");
-    }
-  }
-}
-
-void AirthingsWaveMini::request_read_values_() {
-  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
-                                        ESP_GATT_AUTH_REQ_NONE);
-  if (status) {
-    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
   }
 }
 
 void AirthingsWaveMini::dump_config() {
+  // these really don't belong here, but there doesn't seem to be a
+  // practical way to have the base class use LOG_SENSOR and include
+  // the TAG from this component
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
   LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
 }
 
-AirthingsWaveMini::AirthingsWaveMini()
+AirthingsWaveMini::AirthingsWaveMini() {
-    : PollingComponent(10000),
+  this->service_uuid_ = esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID);
-      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
+  this->sensors_data_characteristic_uuid_ = esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID);
-      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+}
 
 }  // namespace airthings_wave_mini
 }  // namespace esphome

esphome/components/airthings_wave_mini/airthings_wave_mini.h

@@ -2,14 +2,7 @@
 
 #ifdef USE_ESP32
 
-#include <esp_gattc_api.h>
+#include "esphome/components/airthings_wave_base/airthings_wave_base.h"
-#include <algorithm>
-#include <iterator>
-#include "esphome/components/ble_client/ble_client.h"
-#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
 
 namespace esphome {
 namespace airthings_wave_mini {
@@ -17,35 +10,14 @@ namespace airthings_wave_mini {
 static const char *const SERVICE_UUID = "b42e3882-ade7-11e4-89d3-123b93f75cba";
 static const char *const CHARACTERISTIC_UUID = "b42e3b98-ade7-11e4-89d3-123b93f75cba";
 
-class AirthingsWaveMini : public PollingComponent, public ble_client::BLEClientNode {
+class AirthingsWaveMini : public airthings_wave_base::AirthingsWaveBase {
  public:
   AirthingsWaveMini();
 
   void dump_config() override;
-  void update() override;
-
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                           esp_ble_gattc_cb_param_t *param) override;
-
-  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
-  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
-  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
-  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
 
  protected:
-  bool is_valid_voc_value_(uint16_t voc);
+  void read_sensors(uint8_t *value, uint16_t value_len) override;
-
-  void read_sensors_(uint8_t *value, uint16_t value_len);
-  void request_read_values_();
-
-  sensor::Sensor *temperature_sensor_{nullptr};
-  sensor::Sensor *humidity_sensor_{nullptr};
-  sensor::Sensor *pressure_sensor_{nullptr};
-  sensor::Sensor *tvoc_sensor_{nullptr};
-
-  uint16_t handle_;
-  esp32_ble_tracker::ESPBTUUID service_uuid_;
-  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
 
   struct WaveMiniReadings {
     uint16_t unused01;

esphome/components/airthings_wave_mini/sensor.py

@@ -1,82 +1,28 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
+from esphome.components import airthings_wave_base
 
 from esphome.const import (
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_PRESSURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_PERCENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
     CONF_ID,
-    CONF_HUMIDITY,
-    CONF_TVOC,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
-    UNIT_PARTS_PER_BILLION,
-    ICON_RADIATOR,
 )
 
-DEPENDENCIES = ["ble_client"]
+DEPENDENCIES = airthings_wave_base.DEPENDENCIES
+
+AUTO_LOAD = ["airthings_wave_base"]
 
 airthings_wave_mini_ns = cg.esphome_ns.namespace("airthings_wave_mini")
 AirthingsWaveMini = airthings_wave_mini_ns.class_(
-    "AirthingsWaveMini", cg.PollingComponent, ble_client.BLEClientNode
+    "AirthingsWaveMini", airthings_wave_base.AirthingsWaveBase
 )
 
 
-CONFIG_SCHEMA = cv.All(
+CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
-    cv.Schema(
+    {
-        {
+        cv.GenerateID(): cv.declare_id(AirthingsWaveMini),
-            cv.GenerateID(): cv.declare_id(AirthingsWaveMini),
+    }
-            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PERCENT,
-                device_class=DEVICE_CLASS_HUMIDITY,
-                state_class=STATE_CLASS_MEASUREMENT,
-                accuracy_decimals=2,
-            ),
-            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_CELSIUS,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_TEMPERATURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_HECTOPASCAL,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_PRESSURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_TVOC): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_BILLION,
-                icon=ICON_RADIATOR,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("5min"))
-    .extend(ble_client.BLE_CLIENT_SCHEMA),
 )
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
+    await airthings_wave_base.wave_base_to_code(var, config)
-
-    await ble_client.register_ble_node(var, config)
-
-    if CONF_HUMIDITY in config:
-        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
-        cg.add(var.set_humidity(sens))
-    if CONF_TEMPERATURE in config:
-        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
-        cg.add(var.set_temperature(sens))
-    if CONF_PRESSURE in config:
-        sens = await sensor.new_sensor(config[CONF_PRESSURE])
-        cg.add(var.set_pressure(sens))
-    if CONF_TVOC in config:
-        sens = await sensor.new_sensor(config[CONF_TVOC])
-        cg.add(var.set_tvoc(sens))

esphome/components/airthings_wave_plus/airthings_wave_plus.cpp

@@ -7,55 +7,7 @@ namespace airthings_wave_plus {
 
 static const char *const TAG = "airthings_wave_plus";
 
-void AirthingsWavePlus::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
+void AirthingsWavePlus::read_sensors(uint8_t *raw_value, uint16_t value_len) {
-                                            esp_ble_gattc_cb_param_t *param) {
-  switch (event) {
-    case ESP_GATTC_OPEN_EVT: {
-      if (param->open.status == ESP_GATT_OK) {
-        ESP_LOGI(TAG, "Connected successfully!");
-      }
-      break;
-    }
-
-    case ESP_GATTC_DISCONNECT_EVT: {
-      ESP_LOGW(TAG, "Disconnected!");
-      break;
-    }
-
-    case ESP_GATTC_SEARCH_CMPL_EVT: {
-      this->handle_ = 0;
-      auto *chr = this->parent()->get_characteristic(service_uuid_, sensors_data_characteristic_uuid_);
-      if (chr == nullptr) {
-        ESP_LOGW(TAG, "No sensor characteristic found at service %s char %s", service_uuid_.to_string().c_str(),
-                 sensors_data_characteristic_uuid_.to_string().c_str());
-        break;
-      }
-      this->handle_ = chr->handle;
-      this->node_state = esp32_ble_tracker::ClientState::ESTABLISHED;
-
-      request_read_values_();
-      break;
-    }
-
-    case ESP_GATTC_READ_CHAR_EVT: {
-      if (param->read.conn_id != this->parent()->get_conn_id())
-        break;
-      if (param->read.status != ESP_GATT_OK) {
-        ESP_LOGW(TAG, "Error reading char at handle %d, status=%d", param->read.handle, param->read.status);
-        break;
-      }
-      if (param->read.handle == this->handle_) {
-        read_sensors_(param->read.value, param->read.value_len);
-      }
-      break;
-    }
-
-    default:
-      break;
-  }
-}
-
-void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
   auto *value = (WavePlusReadings *) raw_value;
 
   if (sizeof(WavePlusReadings) <= value_len) {
@@ -64,26 +16,38 @@ void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
     if (value->version == 1) {
       ESP_LOGD(TAG, "ambient light = %d", value->ambientLight);
 
-      this->humidity_sensor_->publish_state(value->humidity / 2.0f);
+      if (this->humidity_sensor_ != nullptr) {
-      if (is_valid_radon_value_(value->radon)) {
+        this->humidity_sensor_->publish_state(value->humidity / 2.0f);
+      }
+
+      if ((this->radon_sensor_ != nullptr) && this->is_valid_radon_value_(value->radon)) {
         this->radon_sensor_->publish_state(value->radon);
       }
-      if (is_valid_radon_value_(value->radon_lt)) {
+
+      if ((this->radon_long_term_sensor_ != nullptr) && this->is_valid_radon_value_(value->radon_lt)) {
         this->radon_long_term_sensor_->publish_state(value->radon_lt);
       }
-      this->temperature_sensor_->publish_state(value->temperature / 100.0f);
+
-      this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+      if (this->temperature_sensor_ != nullptr) {
-      if (is_valid_co2_value_(value->co2)) {
+        this->temperature_sensor_->publish_state(value->temperature / 100.0f);
+      }
+
+      if (this->pressure_sensor_ != nullptr) {
+        this->pressure_sensor_->publish_state(value->pressure / 50.0f);
+      }
+
+      if ((this->co2_sensor_ != nullptr) && this->is_valid_co2_value_(value->co2)) {
         this->co2_sensor_->publish_state(value->co2);
       }
-      if (is_valid_voc_value_(value->voc)) {
+
+      if ((this->tvoc_sensor_ != nullptr) && this->is_valid_voc_value_(value->voc)) {
         this->tvoc_sensor_->publish_state(value->voc);
       }
 
       // This instance must not stay connected
       // so other clients can connect to it (e.g. the
       // mobile app).
-      parent()->set_enabled(false);
+      this->parent()->set_enabled(false);
     } else {
       ESP_LOGE(TAG, "Invalid payload version (%d != 1, newer version or not a Wave Plus?)", value->version);
     }
@@ -92,44 +56,26 @@ void AirthingsWavePlus::read_sensors_(uint8_t *raw_value, uint16_t value_len) {
 
 bool AirthingsWavePlus::is_valid_radon_value_(uint16_t radon) { return 0 <= radon && radon <= 16383; }
 
-bool AirthingsWavePlus::is_valid_voc_value_(uint16_t voc) { return 0 <= voc && voc <= 16383; }
-
 bool AirthingsWavePlus::is_valid_co2_value_(uint16_t co2) { return 0 <= co2 && co2 <= 16383; }
 
-void AirthingsWavePlus::update() {
-  if (this->node_state != esp32_ble_tracker::ClientState::ESTABLISHED) {
-    if (!parent()->enabled) {
-      ESP_LOGW(TAG, "Reconnecting to device");
-      parent()->set_enabled(true);
-      parent()->connect();
-    } else {
-      ESP_LOGW(TAG, "Connection in progress");
-    }
-  }
-}
-
-void AirthingsWavePlus::request_read_values_() {
-  auto status = esp_ble_gattc_read_char(this->parent()->get_gattc_if(), this->parent()->get_conn_id(), this->handle_,
-                                        ESP_GATT_AUTH_REQ_NONE);
-  if (status) {
-    ESP_LOGW(TAG, "Error sending read request for sensor, status=%d", status);
-  }
-}
-
 void AirthingsWavePlus::dump_config() {
+  // these really don't belong here, but there doesn't seem to be a
+  // practical way to have the base class use LOG_SENSOR and include
+  // the TAG from this component
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
-  LOG_SENSOR("  ", "Radon", this->radon_sensor_);
-  LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
-  LOG_SENSOR("  ", "CO2", this->co2_sensor_);
   LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_);
+
+  LOG_SENSOR("  ", "Radon", this->radon_sensor_);
+  LOG_SENSOR("  ", "Radon Long Term", this->radon_long_term_sensor_);
+  LOG_SENSOR("  ", "CO2", this->co2_sensor_);
 }
 
-AirthingsWavePlus::AirthingsWavePlus()
+AirthingsWavePlus::AirthingsWavePlus() {
-    : PollingComponent(10000),
+  this->service_uuid_ = esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID);
-      service_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(SERVICE_UUID)),
+  this->sensors_data_characteristic_uuid_ = esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID);
-      sensors_data_characteristic_uuid_(esp32_ble_tracker::ESPBTUUID::from_raw(CHARACTERISTIC_UUID)) {}
+}
 
 }  // namespace airthings_wave_plus
 }  // namespace esphome

esphome/components/airthings_wave_plus/airthings_wave_plus.h

@@ -2,14 +2,7 @@
 
 #ifdef USE_ESP32
 
-#include <esp_gattc_api.h>
+#include "esphome/components/airthings_wave_base/airthings_wave_base.h"
-#include <algorithm>
-#include <iterator>
-#include "esphome/components/ble_client/ble_client.h"
-#include "esphome/components/esp32_ble_tracker/esp32_ble_tracker.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/core/component.h"
-#include "esphome/core/log.h"
 
 namespace esphome {
 namespace airthings_wave_plus {
@@ -17,43 +10,25 @@ namespace airthings_wave_plus {
 static const char *const SERVICE_UUID = "b42e1c08-ade7-11e4-89d3-123b93f75cba";
 static const char *const CHARACTERISTIC_UUID = "b42e2a68-ade7-11e4-89d3-123b93f75cba";
 
-class AirthingsWavePlus : public PollingComponent, public ble_client::BLEClientNode {
+class AirthingsWavePlus : public airthings_wave_base::AirthingsWaveBase {
  public:
   AirthingsWavePlus();
 
   void dump_config() override;
-  void update() override;
 
-  void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
-                           esp_ble_gattc_cb_param_t *param) override;
-
-  void set_temperature(sensor::Sensor *temperature) { temperature_sensor_ = temperature; }
   void set_radon(sensor::Sensor *radon) { radon_sensor_ = radon; }
   void set_radon_long_term(sensor::Sensor *radon_long_term) { radon_long_term_sensor_ = radon_long_term; }
-  void set_humidity(sensor::Sensor *humidity) { humidity_sensor_ = humidity; }
-  void set_pressure(sensor::Sensor *pressure) { pressure_sensor_ = pressure; }
   void set_co2(sensor::Sensor *co2) { co2_sensor_ = co2; }
-  void set_tvoc(sensor::Sensor *tvoc) { tvoc_sensor_ = tvoc; }
 
  protected:
   bool is_valid_radon_value_(uint16_t radon);
-  bool is_valid_voc_value_(uint16_t voc);
   bool is_valid_co2_value_(uint16_t co2);
 
-  void read_sensors_(uint8_t *value, uint16_t value_len);
+  void read_sensors(uint8_t *value, uint16_t value_len) override;
-  void request_read_values_();
 
-  sensor::Sensor *temperature_sensor_{nullptr};
   sensor::Sensor *radon_sensor_{nullptr};
   sensor::Sensor *radon_long_term_sensor_{nullptr};
-  sensor::Sensor *humidity_sensor_{nullptr};
-  sensor::Sensor *pressure_sensor_{nullptr};
   sensor::Sensor *co2_sensor_{nullptr};
-  sensor::Sensor *tvoc_sensor_{nullptr};
-
-  uint16_t handle_;
-  esp32_ble_tracker::ESPBTUUID service_uuid_;
-  esp32_ble_tracker::ESPBTUUID sensors_data_characteristic_uuid_;
 
   struct WavePlusReadings {
     uint8_t version;

esphome/components/airthings_wave_plus/sensor.py

@@ -1,116 +1,64 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
+from esphome.components import sensor, airthings_wave_base
 
 from esphome.const import (
     DEVICE_CLASS_CARBON_DIOXIDE,
-    DEVICE_CLASS_HUMIDITY,
-    DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_PRESSURE,
     STATE_CLASS_MEASUREMENT,
-    UNIT_PERCENT,
-    UNIT_CELSIUS,
-    UNIT_HECTOPASCAL,
     ICON_RADIOACTIVE,
     CONF_ID,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
-    CONF_HUMIDITY,
-    CONF_TVOC,
     CONF_CO2,
-    CONF_PRESSURE,
-    CONF_TEMPERATURE,
     UNIT_BECQUEREL_PER_CUBIC_METER,
     UNIT_PARTS_PER_MILLION,
-    UNIT_PARTS_PER_BILLION,
-    ICON_RADIATOR,
 )
 
-DEPENDENCIES = ["ble_client"]
+DEPENDENCIES = airthings_wave_base.DEPENDENCIES
+
+AUTO_LOAD = ["airthings_wave_base"]
 
 airthings_wave_plus_ns = cg.esphome_ns.namespace("airthings_wave_plus")
 AirthingsWavePlus = airthings_wave_plus_ns.class_(
-    "AirthingsWavePlus", cg.PollingComponent, ble_client.BLEClientNode
+    "AirthingsWavePlus", airthings_wave_base.AirthingsWaveBase
 )
 
 
-CONFIG_SCHEMA = cv.All(
+CONFIG_SCHEMA = airthings_wave_base.BASE_SCHEMA.extend(
-    cv.Schema(
+    {
-        {
+        cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
-            cv.GenerateID(): cv.declare_id(AirthingsWavePlus),
+        cv.Optional(CONF_RADON): sensor.sensor_schema(
-            cv.Optional(CONF_HUMIDITY): sensor.sensor_schema(
+            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-                unit_of_measurement=UNIT_PERCENT,
+            icon=ICON_RADIOACTIVE,
-                device_class=DEVICE_CLASS_HUMIDITY,
+            accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
+            state_class=STATE_CLASS_MEASUREMENT,
-                accuracy_decimals=0,
+        ),
-            ),
+        cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
-            cv.Optional(CONF_RADON): sensor.sensor_schema(
+            unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
-                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+            icon=ICON_RADIOACTIVE,
-                icon=ICON_RADIOACTIVE,
+            accuracy_decimals=0,
-                accuracy_decimals=0,
+            state_class=STATE_CLASS_MEASUREMENT,
-                state_class=STATE_CLASS_MEASUREMENT,
+        ),
-            ),
+        cv.Optional(CONF_CO2): sensor.sensor_schema(
-            cv.Optional(CONF_RADON_LONG_TERM): sensor.sensor_schema(
+            unit_of_measurement=UNIT_PARTS_PER_MILLION,
-                unit_of_measurement=UNIT_BECQUEREL_PER_CUBIC_METER,
+            accuracy_decimals=0,
-                icon=ICON_RADIOACTIVE,
+            device_class=DEVICE_CLASS_CARBON_DIOXIDE,
-                accuracy_decimals=0,
+            state_class=STATE_CLASS_MEASUREMENT,
-                state_class=STATE_CLASS_MEASUREMENT,
+        ),
-            ),
+    }
-            cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_CELSIUS,
-                accuracy_decimals=2,
-                device_class=DEVICE_CLASS_TEMPERATURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_PRESSURE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_HECTOPASCAL,
-                accuracy_decimals=1,
-                device_class=DEVICE_CLASS_PRESSURE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_CO2): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_MILLION,
-                accuracy_decimals=0,
-                device_class=DEVICE_CLASS_CARBON_DIOXIDE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_TVOC): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_BILLION,
-                icon=ICON_RADIATOR,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("5min"))
-    .extend(ble_client.BLE_CLIENT_SCHEMA),
 )
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
+    await airthings_wave_base.wave_base_to_code(var, config)
 
-    await ble_client.register_ble_node(var, config)
-
-    if CONF_HUMIDITY in config:
-        sens = await sensor.new_sensor(config[CONF_HUMIDITY])
-        cg.add(var.set_humidity(sens))
     if CONF_RADON in config:
         sens = await sensor.new_sensor(config[CONF_RADON])
         cg.add(var.set_radon(sens))
     if CONF_RADON_LONG_TERM in config:
         sens = await sensor.new_sensor(config[CONF_RADON_LONG_TERM])
         cg.add(var.set_radon_long_term(sens))
-    if CONF_TEMPERATURE in config:
-        sens = await sensor.new_sensor(config[CONF_TEMPERATURE])
-        cg.add(var.set_temperature(sens))
-    if CONF_PRESSURE in config:
-        sens = await sensor.new_sensor(config[CONF_PRESSURE])
-        cg.add(var.set_pressure(sens))
     if CONF_CO2 in config:
         sens = await sensor.new_sensor(config[CONF_CO2])
         cg.add(var.set_co2(sens))
-    if CONF_TVOC in config:
-        sens = await sensor.new_sensor(config[CONF_TVOC])
-        cg.add(var.set_tvoc(sens))

esphome/components/alarm_control_panel/__init__.py

@@ -0,0 +1,165 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome import automation
+from esphome.automation import maybe_simple_id
+from esphome.core import CORE, coroutine_with_priority
+from esphome.const import (
+    CONF_ID,
+    CONF_ON_STATE,
+    CONF_TRIGGER_ID,
+    CONF_CODE,
+)
+from esphome.cpp_helpers import setup_entity
+
+CODEOWNERS = ["@grahambrown11"]
+IS_PLATFORM_COMPONENT = True
+
+CONF_ON_TRIGGERED = "on_triggered"
+CONF_ON_CLEARED = "on_cleared"
+
+alarm_control_panel_ns = cg.esphome_ns.namespace("alarm_control_panel")
+AlarmControlPanel = alarm_control_panel_ns.class_("AlarmControlPanel", cg.EntityBase)
+
+StateTrigger = alarm_control_panel_ns.class_(
+    "StateTrigger", automation.Trigger.template()
+)
+TriggeredTrigger = alarm_control_panel_ns.class_(
+    "TriggeredTrigger", automation.Trigger.template()
+)
+ClearedTrigger = alarm_control_panel_ns.class_(
+    "ClearedTrigger", automation.Trigger.template()
+)
+ArmAwayAction = alarm_control_panel_ns.class_("ArmAwayAction", automation.Action)
+ArmHomeAction = alarm_control_panel_ns.class_("ArmHomeAction", automation.Action)
+DisarmAction = alarm_control_panel_ns.class_("DisarmAction", automation.Action)
+PendingAction = alarm_control_panel_ns.class_("PendingAction", automation.Action)
+TriggeredAction = alarm_control_panel_ns.class_("TriggeredAction", automation.Action)
+AlarmControlPanelCondition = alarm_control_panel_ns.class_(
+    "AlarmControlPanelCondition", automation.Condition
+)
+
+ALARM_CONTROL_PANEL_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
+    {
+        cv.GenerateID(): cv.declare_id(AlarmControlPanel),
+        cv.Optional(CONF_ON_STATE): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(StateTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_TRIGGERED): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(TriggeredTrigger),
+            }
+        ),
+        cv.Optional(CONF_ON_CLEARED): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ClearedTrigger),
+            }
+        ),
+    }
+)
+
+ALARM_CONTROL_PANEL_ACTION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AlarmControlPanel),
+        cv.Optional(CONF_CODE): cv.templatable(cv.string),
+    }
+)
+
+ALARM_CONTROL_PANEL_CONDITION_SCHEMA = maybe_simple_id(
+    {
+        cv.GenerateID(): cv.use_id(AlarmControlPanel),
+    }
+)
+
+
+async def setup_alarm_control_panel_core_(var, config):
+    await setup_entity(var, config)
+    for conf in config.get(CONF_ON_STATE, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_TRIGGERED, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+    for conf in config.get(CONF_ON_CLEARED, []):
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+        await automation.build_automation(trigger, [], conf)
+
+
+async def register_alarm_control_panel(var, config):
+    if not CORE.has_id(config[CONF_ID]):
+        var = cg.Pvariable(config[CONF_ID], var)
+    cg.add(cg.App.register_alarm_control_panel(var))
+    await setup_alarm_control_panel_core_(var, config)
+
+
+@automation.register_action(
+    "alarm_control_panel.arm_away", ArmAwayAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_arm_away_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.arm_home", ArmHomeAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_arm_home_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.disarm", DisarmAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_disarm_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    if CONF_CODE in config:
+        templatable_ = await cg.templatable(config[CONF_CODE], args, cg.std_string)
+        cg.add(var.set_code(templatable_))
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.pending", PendingAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_pending_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
+@automation.register_action(
+    "alarm_control_panel.triggered", TriggeredAction, ALARM_CONTROL_PANEL_ACTION_SCHEMA
+)
+async def alarm_action_trigger_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    var = cg.new_Pvariable(action_id, template_arg, paren)
+    return var
+
+
+@automation.register_condition(
+    "alarm_control_panel.is_armed",
+    AlarmControlPanelCondition,
+    ALARM_CONTROL_PANEL_CONDITION_SCHEMA,
+)
+async def alarm_control_panel_is_armed_to_code(
+    config, condition_id, template_arg, args
+):
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(condition_id, template_arg, paren)
+
+
+@coroutine_with_priority(100.0)
+async def to_code(config):
+    cg.add_global(alarm_control_panel_ns.using)
+    cg.add_define("USE_ALARM_CONTROL_PANEL")

esphome/components/alarm_control_panel/alarm_control_panel.cpp

@@ -0,0 +1,111 @@
+#include <utility>
+
+#include "alarm_control_panel.h"
+
+#include "esphome/core/application.h"
+#include "esphome/core/helpers.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+static const char *const TAG = "alarm_control_panel";
+
+AlarmControlPanelCall AlarmControlPanel::make_call() { return AlarmControlPanelCall(this); }
+
+bool AlarmControlPanel::is_state_armed(AlarmControlPanelState state) {
+  switch (state) {
+    case ACP_STATE_ARMED_AWAY:
+    case ACP_STATE_ARMED_HOME:
+    case ACP_STATE_ARMED_NIGHT:
+    case ACP_STATE_ARMED_VACATION:
+    case ACP_STATE_ARMED_CUSTOM_BYPASS:
+      return true;
+    default:
+      return false;
+  }
+};
+
+void AlarmControlPanel::publish_state(AlarmControlPanelState state) {
+  this->last_update_ = millis();
+  if (state != this->current_state_) {
+    auto prev_state = this->current_state_;
+    ESP_LOGD(TAG, "Set state to: %s, previous: %s", LOG_STR_ARG(alarm_control_panel_state_to_string(state)),
+             LOG_STR_ARG(alarm_control_panel_state_to_string(prev_state)));
+    this->current_state_ = state;
+    this->state_callback_.call();
+    if (state == ACP_STATE_TRIGGERED) {
+      this->triggered_callback_.call();
+    }
+    if (prev_state == ACP_STATE_TRIGGERED) {
+      this->cleared_callback_.call();
+    }
+    if (state == this->desired_state_) {
+      // only store when in the desired state
+      this->pref_.save(&state);
+    }
+  }
+}
+
+void AlarmControlPanel::add_on_state_callback(std::function<void()> &&callback) {
+  this->state_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::add_on_triggered_callback(std::function<void()> &&callback) {
+  this->triggered_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::add_on_cleared_callback(std::function<void()> &&callback) {
+  this->cleared_callback_.add(std::move(callback));
+}
+
+void AlarmControlPanel::arm_away(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_away();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_home(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_home();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_night(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_night();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_vacation(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_vacation();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::arm_custom_bypass(optional<std::string> code) {
+  auto call = this->make_call();
+  call.arm_custom_bypass();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+void AlarmControlPanel::disarm(optional<std::string> code) {
+  auto call = this->make_call();
+  call.disarm();
+  if (code.has_value())
+    call.set_code(code.value());
+  call.perform();
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel.h

@@ -0,0 +1,136 @@
+#pragma once
+
+#include <map>
+
+#include "alarm_control_panel_call.h"
+#include "alarm_control_panel_state.h"
+
+#include "esphome/core/automation.h"
+#include "esphome/core/entity_base.h"
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+enum AlarmControlPanelFeature : uint8_t {
+  // Matches Home Assistant values
+  ACP_FEAT_ARM_HOME = 1 << 0,
+  ACP_FEAT_ARM_AWAY = 1 << 1,
+  ACP_FEAT_ARM_NIGHT = 1 << 2,
+  ACP_FEAT_TRIGGER = 1 << 3,
+  ACP_FEAT_ARM_CUSTOM_BYPASS = 1 << 4,
+  ACP_FEAT_ARM_VACATION = 1 << 5,
+};
+
+class AlarmControlPanel : public EntityBase {
+ public:
+  /** Make a AlarmControlPanelCall
+   *
+   */
+  AlarmControlPanelCall make_call();
+
+  /** Set the state of the alarm_control_panel.
+   *
+   * @param state The AlarmControlPanelState.
+   */
+  void publish_state(AlarmControlPanelState state);
+
+  /** Add a callback for when the state of the alarm_control_panel changes
+   *
+   * @param callback The callback function
+   */
+  void add_on_state_callback(std::function<void()> &&callback);
+
+  /** Add a callback for when the state of the alarm_control_panel chanes to triggered
+   *
+   * @param callback The callback function
+   */
+  void add_on_triggered_callback(std::function<void()> &&callback);
+
+  /** Add a callback for when the state of the alarm_control_panel clears from triggered
+   *
+   * @param callback The callback function
+   */
+  void add_on_cleared_callback(std::function<void()> &&callback);
+
+  /** A numeric representation of the supported features as per HomeAssistant
+   *
+   */
+  virtual uint32_t get_supported_features() const = 0;
+
+  /** Returns if the alarm_control_panel has a code
+   *
+   */
+  virtual bool get_requires_code() const = 0;
+
+  /** Returns if the alarm_control_panel requires a code to arm
+   *
+   */
+  virtual bool get_requires_code_to_arm() const = 0;
+
+  /** arm the alarm in away mode
+   *
+   * @param code The code
+   */
+  void arm_away(optional<std::string> code = nullopt);
+
+  /** arm the alarm in home mode
+   *
+   * @param code The code
+   */
+  void arm_home(optional<std::string> code = nullopt);
+
+  /** arm the alarm in night mode
+   *
+   * @param code The code
+   */
+  void arm_night(optional<std::string> code = nullopt);
+
+  /** arm the alarm in vacation mode
+   *
+   * @param code The code
+   */
+  void arm_vacation(optional<std::string> code = nullopt);
+
+  /** arm the alarm in custom bypass mode
+   *
+   * @param code The code
+   */
+  void arm_custom_bypass(optional<std::string> code = nullopt);
+
+  /** disarm the alarm
+   *
+   * @param code The code
+   */
+  void disarm(optional<std::string> code = nullopt);
+
+  /** Get the state
+   *
+   */
+  AlarmControlPanelState get_state() const { return this->current_state_; }
+
+  // is the state one of the armed states
+  bool is_state_armed(AlarmControlPanelState state);
+
+ protected:
+  friend AlarmControlPanelCall;
+  // in order to store last panel state in flash
+  ESPPreferenceObject pref_;
+  // current state
+  AlarmControlPanelState current_state_;
+  // the desired (or previous) state
+  AlarmControlPanelState desired_state_;
+  // last time the state was updated
+  uint32_t last_update_;
+  // the call control function
+  virtual void control(const AlarmControlPanelCall &call) = 0;
+  // state callback
+  CallbackManager<void()> state_callback_{};
+  // trigger callback
+  CallbackManager<void()> triggered_callback_{};
+  // clear callback
+  CallbackManager<void()> cleared_callback_{};
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_call.cpp

@@ -0,0 +1,99 @@
+#include "alarm_control_panel_call.h"
+
+#include "alarm_control_panel.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+static const char *const TAG = "alarm_control_panel";
+
+AlarmControlPanelCall::AlarmControlPanelCall(AlarmControlPanel *parent) : parent_(parent) {}
+
+AlarmControlPanelCall &AlarmControlPanelCall::set_code(const std::string &code) {
+  this->code_ = code;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_away() {
+  this->state_ = ACP_STATE_ARMED_AWAY;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_home() {
+  this->state_ = ACP_STATE_ARMED_HOME;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_night() {
+  this->state_ = ACP_STATE_ARMED_NIGHT;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_vacation() {
+  this->state_ = ACP_STATE_ARMED_VACATION;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::arm_custom_bypass() {
+  this->state_ = ACP_STATE_ARMED_CUSTOM_BYPASS;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::disarm() {
+  this->state_ = ACP_STATE_DISARMED;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::pending() {
+  this->state_ = ACP_STATE_PENDING;
+  return *this;
+}
+
+AlarmControlPanelCall &AlarmControlPanelCall::triggered() {
+  this->state_ = ACP_STATE_TRIGGERED;
+  return *this;
+}
+
+const optional<AlarmControlPanelState> &AlarmControlPanelCall::get_state() const { return this->state_; }
+const optional<std::string> &AlarmControlPanelCall::get_code() const { return this->code_; }
+
+void AlarmControlPanelCall::validate_() {
+  if (this->state_.has_value()) {
+    auto state = *this->state_;
+    if (this->parent_->is_state_armed(state) && this->parent_->get_state() != ACP_STATE_DISARMED) {
+      ESP_LOGW(TAG, "Cannot arm when not disarmed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_PENDING && this->parent_->get_state() == ACP_STATE_DISARMED) {
+      ESP_LOGW(TAG, "Cannot trip alarm when disarmed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_DISARMED &&
+        !(this->parent_->is_state_armed(this->parent_->get_state()) ||
+          this->parent_->get_state() == ACP_STATE_PENDING || this->parent_->get_state() == ACP_STATE_ARMING ||
+          this->parent_->get_state() == ACP_STATE_TRIGGERED)) {
+      ESP_LOGW(TAG, "Cannot disarm when not armed");
+      this->state_.reset();
+      return;
+    }
+    if (state == ACP_STATE_ARMED_HOME && (this->parent_->get_supported_features() & ACP_FEAT_ARM_HOME) == 0) {
+      ESP_LOGW(TAG, "Cannot arm home when not supported");
+      this->state_.reset();
+      return;
+    }
+  }
+}
+
+void AlarmControlPanelCall::perform() {
+  this->validate_();
+  if (this->state_) {
+    this->parent_->control(*this);
+  }
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_call.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include <string>
+
+#include "alarm_control_panel_state.h"
+
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+class AlarmControlPanel;
+
+class AlarmControlPanelCall {
+ public:
+  AlarmControlPanelCall(AlarmControlPanel *parent);
+
+  AlarmControlPanelCall &set_code(const std::string &code);
+  AlarmControlPanelCall &arm_away();
+  AlarmControlPanelCall &arm_home();
+  AlarmControlPanelCall &arm_night();
+  AlarmControlPanelCall &arm_vacation();
+  AlarmControlPanelCall &arm_custom_bypass();
+  AlarmControlPanelCall &disarm();
+  AlarmControlPanelCall &pending();
+  AlarmControlPanelCall &triggered();
+
+  void perform();
+  const optional<AlarmControlPanelState> &get_state() const;
+  const optional<std::string> &get_code() const;
+
+ protected:
+  AlarmControlPanel *parent_;
+  optional<std::string> code_{};
+  optional<AlarmControlPanelState> state_{};
+  void validate_();
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_state.cpp

@@ -0,0 +1,34 @@
+#include "alarm_control_panel_state.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+const LogString *alarm_control_panel_state_to_string(AlarmControlPanelState state) {
+  switch (state) {
+    case ACP_STATE_DISARMED:
+      return LOG_STR("DISARMED");
+    case ACP_STATE_ARMED_HOME:
+      return LOG_STR("ARMED_HOME");
+    case ACP_STATE_ARMED_AWAY:
+      return LOG_STR("ARMED_AWAY");
+    case ACP_STATE_ARMED_NIGHT:
+      return LOG_STR("NIGHT");
+    case ACP_STATE_ARMED_VACATION:
+      return LOG_STR("ARMED_VACATION");
+    case ACP_STATE_ARMED_CUSTOM_BYPASS:
+      return LOG_STR("ARMED_CUSTOM_BYPASS");
+    case ACP_STATE_PENDING:
+      return LOG_STR("PENDING");
+    case ACP_STATE_ARMING:
+      return LOG_STR("ARMING");
+    case ACP_STATE_DISARMING:
+      return LOG_STR("DISARMING");
+    case ACP_STATE_TRIGGERED:
+      return LOG_STR("TRIGGERED");
+    default:
+      return LOG_STR("UNKNOWN");
+  }
+}
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/alarm_control_panel_state.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include <cstdint>
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+enum AlarmControlPanelState : uint8_t {
+  ACP_STATE_DISARMED = 0,
+  ACP_STATE_ARMED_HOME = 1,
+  ACP_STATE_ARMED_AWAY = 2,
+  ACP_STATE_ARMED_NIGHT = 3,
+  ACP_STATE_ARMED_VACATION = 4,
+  ACP_STATE_ARMED_CUSTOM_BYPASS = 5,
+  ACP_STATE_PENDING = 6,
+  ACP_STATE_ARMING = 7,
+  ACP_STATE_DISARMING = 8,
+  ACP_STATE_TRIGGERED = 9
+};
+
+/** Returns a string representation of the state.
+ *
+ * @param state The AlarmControlPanelState.
+ */
+const LogString *alarm_control_panel_state_to_string(AlarmControlPanelState state);
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/alarm_control_panel/automation.h

@@ -0,0 +1,115 @@
+
+#pragma once
+#include "esphome/core/automation.h"
+#include "alarm_control_panel.h"
+
+namespace esphome {
+namespace alarm_control_panel {
+
+class StateTrigger : public Trigger<> {
+ public:
+  explicit StateTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_state_callback([this]() { this->trigger(); });
+  }
+};
+
+class TriggeredTrigger : public Trigger<> {
+ public:
+  explicit TriggeredTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_triggered_callback([this]() { this->trigger(); });
+  }
+};
+
+class ClearedTrigger : public Trigger<> {
+ public:
+  explicit ClearedTrigger(AlarmControlPanel *alarm_control_panel) {
+    alarm_control_panel->add_on_cleared_callback([this]() { this->trigger(); });
+  }
+};
+
+template<typename... Ts> class ArmAwayAction : public Action<Ts...> {
+ public:
+  explicit ArmAwayAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override {
+    auto call = this->alarm_control_panel_->make_call();
+    auto code = this->code_.optional_value(x...);
+    if (code.has_value()) {
+      call.set_code(code.value());
+    }
+    call.arm_away();
+    call.perform();
+  }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class ArmHomeAction : public Action<Ts...> {
+ public:
+  explicit ArmHomeAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override {
+    auto call = this->alarm_control_panel_->make_call();
+    auto code = this->code_.optional_value(x...);
+    if (code.has_value()) {
+      call.set_code(code.value());
+    }
+    call.arm_home();
+    call.perform();
+  }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class DisarmAction : public Action<Ts...> {
+ public:
+  explicit DisarmAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  TEMPLATABLE_VALUE(std::string, code)
+
+  void play(Ts... x) override { this->alarm_control_panel_->disarm(this->code_.optional_value(x...)); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class PendingAction : public Action<Ts...> {
+ public:
+  explicit PendingAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  void play(Ts... x) override { this->alarm_control_panel_->make_call().pending().perform(); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class TriggeredAction : public Action<Ts...> {
+ public:
+  explicit TriggeredAction(AlarmControlPanel *alarm_control_panel) : alarm_control_panel_(alarm_control_panel) {}
+
+  void play(Ts... x) override { this->alarm_control_panel_->make_call().triggered().perform(); }
+
+ protected:
+  AlarmControlPanel *alarm_control_panel_;
+};
+
+template<typename... Ts> class AlarmControlPanelCondition : public Condition<Ts...> {
+ public:
+  AlarmControlPanelCondition(AlarmControlPanel *parent) : parent_(parent) {}
+  bool check(Ts... x) override {
+    return this->parent_->is_state_armed(this->parent_->get_state()) ||
+           this->parent_->get_state() == ACP_STATE_PENDING || this->parent_->get_state() == ACP_STATE_TRIGGERED;
+  }
+
+ protected:
+  AlarmControlPanel *parent_;
+};
+
+}  // namespace alarm_control_panel
+}  // namespace esphome

esphome/components/am43/__init__.py

@@ -0,0 +1 @@
+CODEOWNERS = ["@buxtronix"]

esphome/components/am43/cover/__init__.py

@@ -5,7 +5,7 @@ from esphome.const import CONF_ID, CONF_PIN
 
 CODEOWNERS = ["@buxtronix"]
 DEPENDENCIES = ["ble_client"]
-AUTO_LOAD = ["am43", "sensor"]
+AUTO_LOAD = ["am43"]
 
 CONF_INVERT_POSITION = "invert_position"
 
@@ -27,10 +27,10 @@ CONFIG_SCHEMA = (
 )
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     cg.add(var.set_pin(config[CONF_PIN]))
     cg.add(var.set_invert_position(config[CONF_INVERT_POSITION]))
-    yield cg.register_component(var, config)
+    await cg.register_component(var, config)
-    yield cover.register_cover(var, config)
+    await cover.register_cover(var, config)
-    yield ble_client.register_ble_node(var, config)
+    await ble_client.register_ble_node(var, config)

esphome/components/am43/cover/am43_cover.cpp

@@ -40,6 +40,7 @@ void Am43Component::loop() {
 
 CoverTraits Am43Component::get_traits() {
   auto traits = CoverTraits();
+  traits.set_supports_stop(true);
   traits.set_supports_position(true);
   traits.set_supports_tilt(false);
   traits.set_is_assumed_state(false);
@@ -56,20 +57,22 @@ void Am43Component::control(const CoverCall &call) {
     auto status =
         esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                  packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] Error writing stop command to device, error = %d", this->get_name().c_str(), status);
+    }
   }
   if (call.get_position().has_value()) {
     auto pos = *call.get_position();
 
     if (this->invert_position_)
       pos = 1 - pos;
-    auto *packet = this->encoder_->get_set_position_request(100 - (uint8_t)(pos * 100));
+    auto *packet = this->encoder_->get_set_position_request(100 - (uint8_t) (pos * 100));
     auto status =
         esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                  packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] Error writing set_position command to device, error = %d", this->get_name().c_str(), status);
+    }
   }
 }
 
@@ -126,18 +129,21 @@ void Am43Component::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
           auto status = esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(),
                                                  this->char_handle_, packet->length, packet->data,
                                                  ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-          if (status)
+          if (status) {
             ESP_LOGW(TAG, "[%s] Error writing set_position to device, error = %d", this->get_name().c_str(), status);
+          }
         } else {
           ESP_LOGW(TAG, "[%s] AM43 pin rejected!", this->get_name().c_str());
         }
       }
 
-      if (this->decoder_->has_set_position_response() && !this->decoder_->set_position_ok_)
+      if (this->decoder_->has_set_position_response() && !this->decoder_->set_position_ok_) {
         ESP_LOGW(TAG, "[%s] Got nack after sending set_position. Bad pin?", this->get_name().c_str());
+      }
 
-      if (this->decoder_->has_set_state_response() && !this->decoder_->set_state_ok_)
+      if (this->decoder_->has_set_state_response() && !this->decoder_->set_state_ok_) {
         ESP_LOGW(TAG, "[%s] Got nack after sending set_state. Bad pin?", this->get_name().c_str());
+      }
       break;
     }
     default:

esphome/components/am43/sensor/__init__.py

@@ -11,6 +11,7 @@ from esphome.const import (
     UNIT_PERCENT,
 )
 
+AUTO_LOAD = ["am43"]
 CODEOWNERS = ["@buxtronix"]
 
 am43_ns = cg.esphome_ns.namespace("am43")
@@ -38,15 +39,15 @@ CONFIG_SCHEMA = (
 )
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    yield cg.register_component(var, config)
+    await cg.register_component(var, config)
-    yield ble_client.register_ble_node(var, config)
+    await ble_client.register_ble_node(var, config)
 
     if CONF_BATTERY_LEVEL in config:
-        sens = yield sensor.new_sensor(config[CONF_BATTERY_LEVEL])
+        sens = await sensor.new_sensor(config[CONF_BATTERY_LEVEL])
         cg.add(var.set_battery(sens))
 
     if CONF_ILLUMINANCE in config:
-        sens = yield sensor.new_sensor(config[CONF_ILLUMINANCE])
+        sens = await sensor.new_sensor(config[CONF_ILLUMINANCE])
         cg.add(var.set_illuminance(sens))

esphome/components/am43/sensor/am43_sensor.cpp

@@ -1,6 +1,6 @@
-#include "am43.h"
+#include "am43_sensor.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/log.h"
 
 #ifdef USE_ESP32
 
@@ -104,8 +104,9 @@ void Am43::update() {
       auto status =
           esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                    packet->length, packet->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-      if (status)
+      if (status) {
         ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
+      }
     }
     this->current_sensor_++;
   }

esphome/components/analog_threshold/binary_sensor.py

@@ -15,18 +15,24 @@ AnalogThresholdBinarySensor = analog_threshold_ns.class_(
 CONF_UPPER = "upper"
 CONF_LOWER = "lower"
 
-CONFIG_SCHEMA = binary_sensor.BINARY_SENSOR_SCHEMA.extend(
+CONFIG_SCHEMA = (
-    {
+    binary_sensor.binary_sensor_schema(AnalogThresholdBinarySensor)
-        cv.GenerateID(): cv.declare_id(AnalogThresholdBinarySensor),
+    .extend(
-        cv.Required(CONF_SENSOR_ID): cv.use_id(sensor.Sensor),
+        {
-        cv.Required(CONF_THRESHOLD): cv.Any(
+            cv.Required(CONF_SENSOR_ID): cv.use_id(sensor.Sensor),
-            cv.float_,
+            cv.Required(CONF_THRESHOLD): cv.Any(
-            cv.Schema(
+                cv.float_,
-                {cv.Required(CONF_UPPER): cv.float_, cv.Required(CONF_LOWER): cv.float_}
+                cv.Schema(
+                    {
+                        cv.Required(CONF_UPPER): cv.float_,
+                        cv.Required(CONF_LOWER): cv.float_,
+                    }
+                ),
             ),
-        ),
+        }
-    }
+    )
-).extend(cv.COMPONENT_SCHEMA)
+    .extend(cv.COMPONENT_SCHEMA)
+)
 
 
 async def to_code(config):

esphome/components/animation/__init__.py

@@ -3,9 +3,17 @@ import logging
 from esphome import core
 from esphome.components import display, font
 import esphome.components.image as espImage
+from esphome.components.image import CONF_USE_TRANSPARENCY
 import esphome.config_validation as cv
 import esphome.codegen as cg
-from esphome.const import CONF_FILE, CONF_ID, CONF_RAW_DATA_ID, CONF_RESIZE, CONF_TYPE
+from esphome.const import (
+    CONF_FILE,
+    CONF_ID,
+    CONF_RAW_DATA_ID,
+    CONF_REPEAT,
+    CONF_RESIZE,
+    CONF_TYPE,
+)
 from esphome.core import CORE, HexInt
 
 _LOGGER = logging.getLogger(__name__)
@@ -13,18 +21,55 @@ _LOGGER = logging.getLogger(__name__)
 DEPENDENCIES = ["display"]
 MULTI_CONF = True
 
+CONF_LOOP = "loop"
+CONF_START_FRAME = "start_frame"
+CONF_END_FRAME = "end_frame"
+
 Animation_ = display.display_ns.class_("Animation", espImage.Image_)
 
+
+def validate_cross_dependencies(config):
+    """
+    Validate fields whose possible values depend on other fields.
+    For example, validate that explicitly transparent image types
+    have "use_transparency" set to True.
+    Also set the default value for those kind of dependent fields.
+    """
+    image_type = config[CONF_TYPE]
+    is_transparent_type = image_type in ["TRANSPARENT_BINARY", "RGBA"]
+    # If the use_transparency option was not specified, set the default depending on the image type
+    if CONF_USE_TRANSPARENCY not in config:
+        config[CONF_USE_TRANSPARENCY] = is_transparent_type
+
+    if is_transparent_type and not config[CONF_USE_TRANSPARENCY]:
+        raise cv.Invalid(f"Image type {image_type} must always be transparent.")
+
+    return config
+
+
 ANIMATION_SCHEMA = cv.Schema(
-    {
+    cv.All(
-        cv.Required(CONF_ID): cv.declare_id(Animation_),
+        {
-        cv.Required(CONF_FILE): cv.file_,
+            cv.Required(CONF_ID): cv.declare_id(Animation_),
-        cv.Optional(CONF_RESIZE): cv.dimensions,
+            cv.Required(CONF_FILE): cv.file_,
-        cv.Optional(CONF_TYPE, default="BINARY"): cv.enum(
+            cv.Optional(CONF_RESIZE): cv.dimensions,
-            espImage.IMAGE_TYPE, upper=True
+            cv.Optional(CONF_TYPE, default="BINARY"): cv.enum(
-        ),
+                espImage.IMAGE_TYPE, upper=True
-        cv.GenerateID(CONF_RAW_DATA_ID): cv.declare_id(cg.uint8),
+            ),
-    }
+            # Not setting default here on purpose; the default depends on the image type,
+            # and thus will be set in the "validate_cross_dependencies" validator.
+            cv.Optional(CONF_USE_TRANSPARENCY): cv.boolean,
+            cv.Optional(CONF_LOOP): cv.All(
+                {
+                    cv.Optional(CONF_START_FRAME, default=0): cv.positive_int,
+                    cv.Optional(CONF_END_FRAME): cv.positive_int,
+                    cv.Optional(CONF_REPEAT): cv.positive_int,
+                }
+            ),
+            cv.GenerateID(CONF_RAW_DATA_ID): cv.declare_id(cg.uint8),
+        },
+        validate_cross_dependencies,
+    )
 )
 
 CONFIG_SCHEMA = cv.All(font.validate_pillow_installed, ANIMATION_SCHEMA)
@@ -50,16 +95,19 @@ async def to_code(config):
     else:
         if width > 500 or height > 500:
             _LOGGER.warning(
-                "The image you requested is very big. Please consider using"
+                'The image "%s" you requested is very big. Please consider'
-                " the resize parameter."
+                " using the resize parameter.",
+                path,
             )
 
+    transparent = config[CONF_USE_TRANSPARENCY]
+
     if config[CONF_TYPE] == "GRAYSCALE":
         data = [0 for _ in range(height * width * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            frame = image.convert("L", dither=Image.NONE)
+            frame = image.convert("LA", dither=Image.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -67,18 +115,22 @@ async def to_code(config):
                 raise core.EsphomeError(
                     f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
                 )
-            for pix in pixels:
+            for pix, a in pixels:
+                if transparent:
+                    if pix == 1:
+                        pix = 0
+                    if a < 0x80:
+                        pix = 1
+
                 data[pos] = pix
                 pos += 1
 
-    elif config[CONF_TYPE] == "RGB24":
+    elif config[CONF_TYPE] == "RGBA":
-        data = [0 for _ in range(height * width * 3 * frames)]
+        data = [0 for _ in range(height * width * 4 * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            if CONF_RESIZE in config:
+            frame = image.convert("RGBA")
-                image.thumbnail(config[CONF_RESIZE])
-            frame = image.convert("RGB")
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -93,13 +145,15 @@ async def to_code(config):
                 pos += 1
                 data[pos] = pix[2]
                 pos += 1
+                data[pos] = pix[3]
+                pos += 1
 
-    elif config[CONF_TYPE] == "RGB565":
+    elif config[CONF_TYPE] == "RGB24":
-        data = [0 for _ in range(height * width * 2 * frames)]
+        data = [0 for _ in range(height * width * 3 * frames)]
         pos = 0
         for frameIndex in range(frames):
             image.seek(frameIndex)
-            frame = image.convert("RGB")
+            frame = image.convert("RGBA")
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
             pixels = list(frame.getdata())
@@ -107,34 +161,82 @@ async def to_code(config):
                 raise core.EsphomeError(
                     f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
                 )
-            for pix in pixels:
+            for r, g, b, a in pixels:
-                R = pix[0] >> 3
+                if transparent:
-                G = pix[1] >> 2
+                    if r == 0 and g == 0 and b == 1:
-                B = pix[2] >> 3
+                        b = 0
-                rgb = (R << 11) | (G << 5) | B
+                    if a < 0x80:
-                data[pos] = rgb >> 8
+                        r = 0
+                        g = 0
+                        b = 1
+
+                data[pos] = r
                 pos += 1
-                data[pos] = rgb & 255
+                data[pos] = g
+                pos += 1
+                data[pos] = b
                 pos += 1
 
-    elif config[CONF_TYPE] == "BINARY":
+    elif config[CONF_TYPE] in ["RGB565", "TRANSPARENT_IMAGE"]:
+        data = [0 for _ in range(height * width * 2 * frames)]
+        pos = 0
+        for frameIndex in range(frames):
+            image.seek(frameIndex)
+            frame = image.convert("RGBA")
+            if CONF_RESIZE in config:
+                frame = frame.resize([width, height])
+            pixels = list(frame.getdata())
+            if len(pixels) != height * width:
+                raise core.EsphomeError(
+                    f"Unexpected number of pixels in {path} frame {frameIndex}: ({len(pixels)} != {height*width})"
+                )
+            for r, g, b, a in pixels:
+                R = r >> 3
+                G = g >> 2
+                B = b >> 3
+                rgb = (R << 11) | (G << 5) | B
+
+                if transparent:
+                    if rgb == 0x0020:
+                        rgb = 0
+                    if a < 0x80:
+                        rgb = 0x0020
+
+                data[pos] = rgb >> 8
+                pos += 1
+                data[pos] = rgb & 0xFF
+                pos += 1
+
+    elif config[CONF_TYPE] in ["BINARY", "TRANSPARENT_BINARY"]:
         width8 = ((width + 7) // 8) * 8
         data = [0 for _ in range((height * width8 // 8) * frames)]
         for frameIndex in range(frames):
             image.seek(frameIndex)
+            if transparent:
+                alpha = image.split()[-1]
+                has_alpha = alpha.getextrema()[0] < 0xFF
             frame = image.convert("1", dither=Image.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])
-            for y in range(height):
+                if transparent:
-                for x in range(width):
+                    alpha = alpha.resize([width, height])
-                    if frame.getpixel((x, y)):
+            for x, y in [(i, j) for i in range(width) for j in range(height)]:
+                if transparent and has_alpha:
+                    if not alpha.getpixel((x, y)):
                         continue
-                    pos = x + y * width8 + (height * width8 * frameIndex)
+                elif frame.getpixel((x, y)):
-                    data[pos // 8] |= 0x80 >> (pos % 8)
+                    continue
+
+                pos = x + y * width8 + (height * width8 * frameIndex)
+                data[pos // 8] |= 0x80 >> (pos % 8)
+    else:
+        raise core.EsphomeError(
+            f"Animation f{config[CONF_ID]} has not supported type {config[CONF_TYPE]}."
+        )
 
     rhs = [HexInt(x) for x in data]
     prog_arr = cg.progmem_array(config[CONF_RAW_DATA_ID], rhs)
-    cg.new_Pvariable(
+    var = cg.new_Pvariable(
         config[CONF_ID],
         prog_arr,
         width,
@@ -142,3 +244,9 @@ async def to_code(config):
         frames,
         espImage.IMAGE_TYPE[config[CONF_TYPE]],
     )
+    cg.add(var.set_transparency(transparent))
+    if CONF_LOOP in config:
+        start = config[CONF_LOOP][CONF_START_FRAME]
+        end = config[CONF_LOOP].get(CONF_END_FRAME, frames)
+        count = config[CONF_LOOP].get(CONF_REPEAT, -1)
+        cg.add(var.set_loop(start, end, count))

esphome/components/anova/anova.cpp

@@ -37,16 +37,18 @@ void Anova::control(const ClimateCall &call) {
     auto status =
         esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                  pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
+    }
   }
   if (call.get_target_temperature().has_value()) {
     auto *pkt = this->codec_->get_set_target_temp_request(*call.get_target_temperature());
     auto status =
         esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                  pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
+    }
   }
 }
 
@@ -143,8 +145,9 @@ void Anova::update() {
     auto status =
         esp_ble_gattc_write_char(this->parent_->get_gattc_if(), this->parent_->get_conn_id(), this->char_handle_,
                                  pkt->length, pkt->data, ESP_GATT_WRITE_TYPE_NO_RSP, ESP_GATT_AUTH_REQ_NONE);
-    if (status)
+    if (status) {
       ESP_LOGW(TAG, "[%s] esp_ble_gattc_write_char failed, status=%d", this->parent_->address_str().c_str(), status);
+    }
     this->current_request_++;
   }
 }

esphome/components/apds9960/__init__.py

@@ -4,7 +4,6 @@ from esphome.components import i2c
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "binary_sensor"]
 MULTI_CONF = True
 
 CONF_APDS9960_ID = "apds9960_id"

esphome/components/apds9960/apds9960.cpp

@@ -23,7 +23,7 @@ void APDS9960::setup() {
     return;
   }
 
-  if (id != 0xAB && id != 0x9C) {  // APDS9960 all should have one of these IDs
+  if (id != 0xAB && id != 0x9C && id != 0xA8) {  // APDS9960 all should have one of these IDs
     this->error_code_ = WRONG_ID;
     this->mark_failed();
     return;
@@ -116,8 +116,12 @@ void APDS9960::setup() {
   APDS9960_WRITE_BYTE(0x80, val);
 }
 bool APDS9960::is_color_enabled_() const {
-  return this->red_channel_ != nullptr || this->green_channel_ != nullptr || this->blue_channel_ != nullptr ||
+#ifdef USE_SENSOR
-         this->clear_channel_ != nullptr;
+  return this->red_sensor_ != nullptr || this->green_sensor_ != nullptr || this->blue_sensor_ != nullptr ||
+         this->clear_sensor_ != nullptr;
+#else
+  return false;
+#endif
 }
 
 void APDS9960::dump_config() {
@@ -125,6 +129,15 @@ void APDS9960::dump_config() {
   LOG_I2C_DEVICE(this);
 
   LOG_UPDATE_INTERVAL(this);
+
+#ifdef USE_SENSOR
+  LOG_SENSOR("  ", "Red channel", this->red_sensor_);
+  LOG_SENSOR("  ", "Green channel", this->green_sensor_);
+  LOG_SENSOR("  ", "Blue channel", this->blue_sensor_);
+  LOG_SENSOR("  ", "Clear channel", this->clear_sensor_);
+  LOG_SENSOR("  ", "Proximity", this->proximity_sensor_);
+#endif
+
   if (this->is_failed()) {
     switch (this->error_code_) {
       case COMMUNICATION_FAILED:
@@ -181,17 +194,22 @@ void APDS9960::read_color_data_(uint8_t status) {
   float blue_perc = (uint_blue / float(UINT16_MAX)) * 100.0f;
 
   ESP_LOGD(TAG, "Got clear=%.1f%% red=%.1f%% green=%.1f%% blue=%.1f%%", clear_perc, red_perc, green_perc, blue_perc);
-  if (this->clear_channel_ != nullptr)
+#ifdef USE_SENSOR
-    this->clear_channel_->publish_state(clear_perc);
+  if (this->clear_sensor_ != nullptr)
-  if (this->red_channel_ != nullptr)
+    this->clear_sensor_->publish_state(clear_perc);
-    this->red_channel_->publish_state(red_perc);
+  if (this->red_sensor_ != nullptr)
-  if (this->green_channel_ != nullptr)
+    this->red_sensor_->publish_state(red_perc);
-    this->green_channel_->publish_state(green_perc);
+  if (this->green_sensor_ != nullptr)
-  if (this->blue_channel_ != nullptr)
+    this->green_sensor_->publish_state(green_perc);
-    this->blue_channel_->publish_state(blue_perc);
+  if (this->blue_sensor_ != nullptr)
+    this->blue_sensor_->publish_state(blue_perc);
+#endif
 }
 void APDS9960::read_proximity_data_(uint8_t status) {
-  if (this->proximity_ == nullptr)
+#ifndef USE_SENSOR
+  return;
+#else
+  if (this->proximity_sensor_ == nullptr)
     return;
 
   if ((status & 0b10) == 0x00) {
@@ -204,7 +222,8 @@ void APDS9960::read_proximity_data_(uint8_t status) {
 
   float prox_perc = (prox / float(UINT8_MAX)) * 100.0f;
   ESP_LOGD(TAG, "Got proximity=%.1f%%", prox_perc);
-  this->proximity_->publish_state(prox_perc);
+  this->proximity_sensor_->publish_state(prox_perc);
+#endif
 }
 void APDS9960::read_gesture_data_() {
   if (!this->is_gesture_enabled_())
@@ -256,28 +275,29 @@ void APDS9960::read_gesture_data_() {
   }
 }
 void APDS9960::report_gesture_(int gesture) {
+#ifdef USE_BINARY_SENSOR
   binary_sensor::BinarySensor *bin;
   switch (gesture) {
     case 1:
-      bin = this->up_direction_;
+      bin = this->up_direction_binary_sensor_;
       this->gesture_up_started_ = false;
       this->gesture_down_started_ = false;
       ESP_LOGD(TAG, "Got gesture UP");
       break;
     case 2:
-      bin = this->down_direction_;
+      bin = this->down_direction_binary_sensor_;
       this->gesture_up_started_ = false;
       this->gesture_down_started_ = false;
       ESP_LOGD(TAG, "Got gesture DOWN");
       break;
     case 3:
-      bin = this->left_direction_;
+      bin = this->left_direction_binary_sensor_;
       this->gesture_left_started_ = false;
       this->gesture_right_started_ = false;
       ESP_LOGD(TAG, "Got gesture LEFT");
       break;
     case 4:
-      bin = this->right_direction_;
+      bin = this->right_direction_binary_sensor_;
       this->gesture_left_started_ = false;
       this->gesture_right_started_ = false;
       ESP_LOGD(TAG, "Got gesture RIGHT");
@@ -290,6 +310,7 @@ void APDS9960::report_gesture_(int gesture) {
     bin->publish_state(true);
     bin->publish_state(false);
   }
+#endif
 }
 void APDS9960::process_dataset_(int up, int down, int left, int right) {
   /* Algorithm: (see Figure 11 in datasheet)
@@ -365,10 +386,22 @@ void APDS9960::process_dataset_(int up, int down, int left, int right) {
   }
 }
 float APDS9960::get_setup_priority() const { return setup_priority::DATA; }
-bool APDS9960::is_proximity_enabled_() const { return this->proximity_ != nullptr || this->is_gesture_enabled_(); }
+bool APDS9960::is_proximity_enabled_() const {
+  return
+#ifdef USE_SENSOR
+      this->proximity_sensor_ != nullptr
+#else
+      false
+#endif
+      || this->is_gesture_enabled_();
+}
 bool APDS9960::is_gesture_enabled_() const {
-  return this->up_direction_ != nullptr || this->left_direction_ != nullptr || this->down_direction_ != nullptr ||
+#ifdef USE_BINARY_SENSOR
-         this->right_direction_ != nullptr;
+  return this->up_direction_binary_sensor_ != nullptr || this->left_direction_binary_sensor_ != nullptr ||
+         this->down_direction_binary_sensor_ != nullptr || this->right_direction_binary_sensor_ != nullptr;
+#else
+  return false;
+#endif
 }
 
 }  // namespace apds9960