Merge remote-tracking branch 'upstream/dev' into beta_premerge

Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>

esphome/components/bl0942/bl0942.cpp

@@ -46,16 +46,16 @@ static const uint32_t PKT_TIMEOUT_MS = 200;
 
 void BL0942::loop() {
   DataPacket buffer;
-  int avail = this->available();
+  size_t avail = this->available();
 
   if (!avail) {
     return;
   }
-  if (static_cast<size_t>(avail) < sizeof(buffer)) {
+  if (avail < sizeof(buffer)) {
     if (!this->rx_start_) {
       this->rx_start_ = millis();
     } else if (millis() > this->rx_start_ + PKT_TIMEOUT_MS) {
-      ESP_LOGW(TAG, "Junk on wire. Throwing away partial message (%d bytes)", avail);
+      ESP_LOGW(TAG, "Junk on wire. Throwing away partial message (%zu bytes)", avail);
       this->read_array((uint8_t *) &buffer, avail);
       this->rx_start_ = 0;
     }

esphome/components/mipi_dsi/models/waveshare.py

@@ -120,3 +120,101 @@ DriverChip(
         (0xB2, 0x10),
     ],
 )
+
+DriverChip(
+    "WAVESHARE-ESP32-P4-WIFI6-TOUCH-LCD-3.4C",
+    height=800,
+    width=800,
+    hsync_back_porch=20,
+    hsync_pulse_width=20,
+    hsync_front_porch=40,
+    vsync_back_porch=12,
+    vsync_pulse_width=4,
+    vsync_front_porch=24,
+    pclk_frequency="80MHz",
+    lane_bit_rate="1.5Gbps",
+    swap_xy=cv.UNDEFINED,
+    color_order="RGB",
+    initsequence=[
+        (0xE0, 0x00),  # select userpage
+        (0xE1, 0x93), (0xE2, 0x65), (0xE3, 0xF8),
+        (0x80, 0x01),  # Select number of lanes (2)
+        (0xE0, 0x01),  # select page 1
+        (0x00, 0x00), (0x01, 0x41), (0x03, 0x10), (0x04, 0x44), (0x17, 0x00), (0x18, 0xD0), (0x19, 0x00), (0x1A, 0x00),
+        (0x1B, 0xD0), (0x1C, 0x00), (0x24, 0xFE), (0x35, 0x26), (0x37, 0x09), (0x38, 0x04), (0x39, 0x08), (0x3A, 0x0A),
+        (0x3C, 0x78), (0x3D, 0xFF), (0x3E, 0xFF), (0x3F, 0xFF), (0x40, 0x00), (0x41, 0x64), (0x42, 0xC7), (0x43, 0x18),
+        (0x44, 0x0B), (0x45, 0x14), (0x55, 0x02), (0x57, 0x49), (0x59, 0x0A), (0x5A, 0x1B), (0x5B, 0x19), (0x5D, 0x7F),
+        (0x5E, 0x56), (0x5F, 0x43), (0x60, 0x37), (0x61, 0x33), (0x62, 0x25), (0x63, 0x2A), (0x64, 0x16), (0x65, 0x30),
+        (0x66, 0x2F), (0x67, 0x32), (0x68, 0x53), (0x69, 0x43), (0x6A, 0x4C), (0x6B, 0x40), (0x6C, 0x3D), (0x6D, 0x31),
+        (0x6E, 0x20), (0x6F, 0x0F), (0x70, 0x7F), (0x71, 0x56), (0x72, 0x43), (0x73, 0x37), (0x74, 0x33), (0x75, 0x25),
+        (0x76, 0x2A), (0x77, 0x16), (0x78, 0x30), (0x79, 0x2F), (0x7A, 0x32), (0x7B, 0x53), (0x7C, 0x43), (0x7D, 0x4C),
+        (0x7E, 0x40), (0x7F, 0x3D), (0x80, 0x31), (0x81, 0x20), (0x82, 0x0F),
+        (0xE0, 0x02),  # select page 2
+        (0x00, 0x5F), (0x01, 0x5F), (0x02, 0x5E), (0x03, 0x5E), (0x04, 0x50), (0x05, 0x48), (0x06, 0x48), (0x07, 0x4A),
+        (0x08, 0x4A), (0x09, 0x44), (0x0A, 0x44), (0x0B, 0x46), (0x0C, 0x46), (0x0D, 0x5F), (0x0E, 0x5F), (0x0F, 0x57),
+        (0x10, 0x57), (0x11, 0x77), (0x12, 0x77), (0x13, 0x40), (0x14, 0x42), (0x15, 0x5F), (0x16, 0x5F), (0x17, 0x5F),
+        (0x18, 0x5E), (0x19, 0x5E), (0x1A, 0x50), (0x1B, 0x49), (0x1C, 0x49), (0x1D, 0x4B), (0x1E, 0x4B), (0x1F, 0x45),
+        (0x20, 0x45), (0x21, 0x47), (0x22, 0x47), (0x23, 0x5F), (0x24, 0x5F), (0x25, 0x57), (0x26, 0x57), (0x27, 0x77),
+        (0x28, 0x77), (0x29, 0x41), (0x2A, 0x43), (0x2B, 0x5F), (0x2C, 0x1E), (0x2D, 0x1E), (0x2E, 0x1F), (0x2F, 0x1F),
+        (0x30, 0x10), (0x31, 0x07), (0x32, 0x07), (0x33, 0x05), (0x34, 0x05), (0x35, 0x0B), (0x36, 0x0B), (0x37, 0x09),
+        (0x38, 0x09), (0x39, 0x1F), (0x3A, 0x1F), (0x3B, 0x17), (0x3C, 0x17), (0x3D, 0x17), (0x3E, 0x17), (0x3F, 0x03),
+        (0x40, 0x01), (0x41, 0x1F), (0x42, 0x1E), (0x43, 0x1E), (0x44, 0x1F), (0x45, 0x1F), (0x46, 0x10), (0x47, 0x06),
+        (0x48, 0x06), (0x49, 0x04), (0x4A, 0x04), (0x4B, 0x0A), (0x4C, 0x0A), (0x4D, 0x08), (0x4E, 0x08), (0x4F, 0x1F),
+        (0x50, 0x1F), (0x51, 0x17), (0x52, 0x17), (0x53, 0x17), (0x54, 0x17), (0x55, 0x02), (0x56, 0x00), (0x57, 0x1F),
+        (0xE0, 0x02),  # select page 2
+        (0x58, 0x40), (0x59, 0x00), (0x5A, 0x00), (0x5B, 0x30), (0x5C, 0x01), (0x5D, 0x30), (0x5E, 0x01), (0x5F, 0x02),
+        (0x60, 0x30), (0x61, 0x03), (0x62, 0x04), (0x63, 0x04), (0x64, 0xA6), (0x65, 0x43), (0x66, 0x30), (0x67, 0x73),
+        (0x68, 0x05), (0x69, 0x04), (0x6A, 0x7F), (0x6B, 0x08), (0x6C, 0x00), (0x6D, 0x04), (0x6E, 0x04), (0x6F, 0x88),
+        (0x75, 0xD9), (0x76, 0x00), (0x77, 0x33), (0x78, 0x43),
+        (0xE0, 0x00),  # select userpage
+    ],
+)
+
+DriverChip(
+    "WAVESHARE-ESP32-P4-WIFI6-TOUCH-LCD-4C",
+    height=720,
+    width=720,
+    hsync_back_porch=20,
+    hsync_pulse_width=20,
+    hsync_front_porch=40,
+    vsync_back_porch=12,
+    vsync_pulse_width=4,
+    vsync_front_porch=24,
+    pclk_frequency="80MHz",
+    lane_bit_rate="1.5Gbps",
+    swap_xy=cv.UNDEFINED,
+    color_order="RGB",
+    initsequence=[
+        (0xE0, 0x00),  # select userpage
+        (0xE1, 0x93), (0xE2, 0x65), (0xE3, 0xF8),
+        (0x80, 0x01),  # Select number of lanes (2)
+        (0xE0, 0x01),  # select page 1
+        (0x00, 0x00), (0x01, 0x41), (0x03, 0x10), (0x04, 0x44), (0x17, 0x00), (0x18, 0xD0), (0x19, 0x00), (0x1A, 0x00),
+        (0x1B, 0xD0), (0x1C, 0x00), (0x24, 0xFE), (0x35, 0x26), (0x37, 0x09), (0x38, 0x04), (0x39, 0x08), (0x3A, 0x0A),
+        (0x3C, 0x78), (0x3D, 0xFF), (0x3E, 0xFF), (0x3F, 0xFF), (0x40, 0x04), (0x41, 0x64), (0x42, 0xC7), (0x43, 0x18),
+        (0x44, 0x0B), (0x45, 0x14), (0x55, 0x02), (0x57, 0x49), (0x59, 0x0A), (0x5A, 0x1B), (0x5B, 0x19), (0x5D, 0x7F),
+        (0x5E, 0x56), (0x5F, 0x43), (0x60, 0x37), (0x61, 0x33), (0x62, 0x25), (0x63, 0x2A), (0x64, 0x16), (0x65, 0x30),
+        (0x66, 0x2F), (0x67, 0x32), (0x68, 0x53), (0x69, 0x43), (0x6A, 0x4C), (0x6B, 0x40), (0x6C, 0x3D), (0x6D, 0x31),
+        (0x6E, 0x20), (0x6F, 0x0F), (0x70, 0x7F), (0x71, 0x56), (0x72, 0x43), (0x73, 0x37), (0x74, 0x33), (0x75, 0x25),
+        (0x76, 0x2A), (0x77, 0x16), (0x78, 0x30), (0x79, 0x2F), (0x7A, 0x32), (0x7B, 0x53), (0x7C, 0x43), (0x7D, 0x4C),
+        (0x7E, 0x40), (0x7F, 0x3D), (0x80, 0x31), (0x81, 0x20), (0x82, 0x0F),
+        (0xE0, 0x02),  # select page 2
+        (0x00, 0x5F), (0x01, 0x5F), (0x02, 0x5E), (0x03, 0x5E), (0x04, 0x50), (0x05, 0x48), (0x06, 0x48), (0x07, 0x4A),
+        (0x08, 0x4A), (0x09, 0x44), (0x0A, 0x44), (0x0B, 0x46), (0x0C, 0x46), (0x0D, 0x5F), (0x0E, 0x5F), (0x0F, 0x57),
+        (0x10, 0x57), (0x11, 0x77), (0x12, 0x77), (0x13, 0x40), (0x14, 0x42), (0x15, 0x5F), (0x16, 0x5F), (0x17, 0x5F),
+        (0x18, 0x5E), (0x19, 0x5E), (0x1A, 0x50), (0x1B, 0x49), (0x1C, 0x49), (0x1D, 0x4B), (0x1E, 0x4B), (0x1F, 0x45),
+        (0x20, 0x45), (0x21, 0x47), (0x22, 0x47), (0x23, 0x5F), (0x24, 0x5F), (0x25, 0x57), (0x26, 0x57), (0x27, 0x77),
+        (0x28, 0x77), (0x29, 0x41), (0x2A, 0x43), (0x2B, 0x5F), (0x2C, 0x1E), (0x2D, 0x1E), (0x2E, 0x1F), (0x2F, 0x1F),
+        (0x30, 0x10), (0x31, 0x07), (0x32, 0x07), (0x33, 0x05), (0x34, 0x05), (0x35, 0x0B), (0x36, 0x0B), (0x37, 0x09),
+        (0x38, 0x09), (0x39, 0x1F), (0x3A, 0x1F), (0x3B, 0x17), (0x3C, 0x17), (0x3D, 0x17), (0x3E, 0x17), (0x3F, 0x03),
+        (0x40, 0x01), (0x41, 0x1F), (0x42, 0x1E), (0x43, 0x1E), (0x44, 0x1F), (0x45, 0x1F), (0x46, 0x10), (0x47, 0x06),
+        (0x48, 0x06), (0x49, 0x04), (0x4A, 0x04), (0x4B, 0x0A), (0x4C, 0x0A), (0x4D, 0x08), (0x4E, 0x08), (0x4F, 0x1F),
+        (0x50, 0x1F), (0x51, 0x17), (0x52, 0x17), (0x53, 0x17), (0x54, 0x17), (0x55, 0x02), (0x56, 0x00), (0x57, 0x1F),
+        (0xE0, 0x02),  # select page 2
+        (0x58, 0x40), (0x59, 0x00), (0x5A, 0x00), (0x5B, 0x30), (0x5C, 0x01), (0x5D, 0x30), (0x5E, 0x01), (0x5F, 0x02),
+        (0x60, 0x30), (0x61, 0x03), (0x62, 0x04), (0x63, 0x04), (0x64, 0xA6), (0x65, 0x43), (0x66, 0x30), (0x67, 0x73),
+        (0x68, 0x05), (0x69, 0x04), (0x6A, 0x7F), (0x6B, 0x08), (0x6C, 0x00), (0x6D, 0x04), (0x6E, 0x04), (0x6F, 0x88),
+        (0x75, 0xD9), (0x76, 0x00), (0x77, 0x33), (0x78, 0x43),
+        (0xE0, 0x00),  # select userpage
+    ]
+)

esphome/components/mipi_rgb/display.py

@@ -11,7 +11,7 @@ from esphome.components.const import (
     CONF_DRAW_ROUNDING,
 )
 from esphome.components.display import CONF_SHOW_TEST_CARD
-from esphome.components.esp32 import VARIANT_ESP32S3, only_on_variant
+from esphome.components.esp32 import VARIANT_ESP32P4, VARIANT_ESP32S3, only_on_variant
 from esphome.components.mipi import (
     COLOR_ORDERS,
     CONF_DE_PIN,
@@ -225,7 +225,7 @@ def _config_schema(config):
     return cv.All(
         schema,
         cv.only_on_esp32,
-        only_on_variant(supported=[VARIANT_ESP32S3]),
+        only_on_variant(supported=[VARIANT_ESP32S3, VARIANT_ESP32P4]),
     )(config)
 
 

esphome/components/mipi_rgb/mipi_rgb.cpp

@@ -1,4 +1,4 @@
-#ifdef USE_ESP32_VARIANT_ESP32S3
+#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)
 #include "mipi_rgb.h"
 #include "esphome/core/gpio.h"
 #include "esphome/core/hal.h"
@@ -401,4 +401,4 @@ void MipiRgb::dump_config() {
 
 }  // namespace mipi_rgb
 }  // namespace esphome
-#endif  // USE_ESP32_VARIANT_ESP32S3
+#endif  // defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)

esphome/components/mipi_rgb/mipi_rgb.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#ifdef USE_ESP32_VARIANT_ESP32S3
+#if defined(USE_ESP32_VARIANT_ESP32S3) || defined(USE_ESP32_VARIANT_ESP32P4)
 #include "esphome/core/gpio.h"
 #include "esphome/components/display/display.h"
 #include "esp_lcd_panel_ops.h"
@@ -28,7 +28,7 @@ class MipiRgb : public display::Display {
   void setup() override;
   void loop() override;
   void update() override;
-  void fill(Color color);
+  void fill(Color color) override;
   void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
                       display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
   void write_to_display_(int x_start, int y_start, int w, int h, const uint8_t *ptr, int x_offset, int y_offset,
@@ -115,7 +115,7 @@ class MipiRgbSpi : public MipiRgb,
   void write_command_(uint8_t value);
   void write_data_(uint8_t value);
   void write_init_sequence_();
-  void dump_config();
+  void dump_config() override;
 
   GPIOPin *dc_pin_{nullptr};
   std::vector<uint8_t> init_sequence_;

esphome/components/tormatic/tormatic_cover.cpp

@@ -251,7 +251,7 @@ void Tormatic::stop_at_target_() {
 // Read a GateStatus from the unit. The unit only sends messages in response to
 // status requests or commands, so a message needs to be sent first.
 optional<GateStatus> Tormatic::read_gate_status_() {
-  if (this->available() < static_cast<int>(sizeof(MessageHeader))) {
+  if (this->available() < sizeof(MessageHeader)) {
     return {};
   }
 

esphome/components/uart/uart.h

@@ -43,7 +43,7 @@ class UARTDevice {
     return res;
   }
 
-  int available() { return this->parent_->available(); }
+  size_t available() { return this->parent_->available(); }
 
   void flush() { this->parent_->flush(); }
 

esphome/components/uart/uart_component.cpp

@@ -5,13 +5,13 @@ namespace esphome::uart {
 static const char *const TAG = "uart";
 
 bool UARTComponent::check_read_timeout_(size_t len) {
-  if (this->available() >= int(len))
+  if (this->available() >= len)
     return true;
 
   uint32_t start_time = millis();
-  while (this->available() < int(len)) {
+  while (this->available() < len) {
     if (millis() - start_time > 100) {
-      ESP_LOGE(TAG, "Reading from UART timed out at byte %u!", this->available());
+      ESP_LOGE(TAG, "Reading from UART timed out at byte %zu!", this->available());
       return false;
     }
     yield();

esphome/components/uart/uart_component.h

@@ -69,7 +69,7 @@ class UARTComponent {
 
   // Pure virtual method to return the number of bytes available for reading.
   // @return Number of available bytes.
-  virtual int available() = 0;
+  virtual size_t available() = 0;
 
   // Pure virtual method to block until all bytes have been written to the UART bus.
   virtual void flush() = 0;

esphome/components/uart/uart_component_esp8266.cpp

@@ -206,7 +206,7 @@ bool ESP8266UartComponent::read_array(uint8_t *data, size_t len) {
 #endif
   return true;
 }
-int ESP8266UartComponent::available() {
+size_t ESP8266UartComponent::available() {
   if (this->hw_serial_ != nullptr) {
     return this->hw_serial_->available();
   } else {
@@ -329,11 +329,14 @@ uint8_t ESP8266SoftwareSerial::peek_byte() {
 void ESP8266SoftwareSerial::flush() {
   // Flush is a NO-OP with software serial, all bytes are written immediately.
 }
-int ESP8266SoftwareSerial::available() {
-  int avail = int(this->rx_in_pos_) - int(this->rx_out_pos_);
-  if (avail < 0)
-    return avail + this->rx_buffer_size_;
-  return avail;
+size_t ESP8266SoftwareSerial::available() {
+  // Read volatile rx_in_pos_ once to avoid TOCTOU race with ISR.
+  // When in >= out, data is contiguous: [out..in).
+  // When in < out, data wraps: [out..buf_size) + [0..in).
+  size_t in = this->rx_in_pos_;
+  if (in >= this->rx_out_pos_)
+    return in - this->rx_out_pos_;
+  return this->rx_buffer_size_ - this->rx_out_pos_ + in;
 }
 
 }  // namespace esphome::uart

esphome/components/uart/uart_component_esp8266.h

@@ -23,7 +23,7 @@ class ESP8266SoftwareSerial {
 
   void write_byte(uint8_t data);
 
-  int available();
+  size_t available();
 
  protected:
   static void gpio_intr(ESP8266SoftwareSerial *arg);
@@ -57,7 +57,7 @@ class ESP8266UartComponent : public UARTComponent, public Component {
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
 
-  int available() override;
+  size_t available() override;
   void flush() override;
 
   uint32_t get_config();

esphome/components/uart/uart_component_esp_idf.cpp

@@ -338,7 +338,7 @@ bool IDFUARTComponent::read_array(uint8_t *data, size_t len) {
   return read_len == (int32_t) length_to_read;
 }
 
-int IDFUARTComponent::available() {
+size_t IDFUARTComponent::available() {
   size_t available = 0;
   esp_err_t err;
 

esphome/components/uart/uart_component_esp_idf.h

@@ -22,7 +22,7 @@ class IDFUARTComponent : public UARTComponent, public Component {
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
 
-  int available() override;
+  size_t available() override;
   void flush() override;
 
   uint8_t get_hw_serial_number() { return this->uart_num_; }

esphome/components/uart/uart_component_host.cpp

@@ -265,7 +265,7 @@ bool HostUartComponent::read_array(uint8_t *data, size_t len) {
   return true;
 }
 
-int HostUartComponent::available() {
+size_t HostUartComponent::available() {
   if (this->file_descriptor_ == -1) {
     return 0;
   }
@@ -275,9 +275,10 @@ int HostUartComponent::available() {
     this->update_error_(strerror(errno));
     return 0;
   }
+  size_t result = available;
   if (this->has_peek_)
-    available++;
-  return available;
+    result++;
+  return result;
 };
 
 void HostUartComponent::flush() {

esphome/components/uart/uart_component_host.h

@@ -17,7 +17,7 @@ class HostUartComponent : public UARTComponent, public Component {
   void write_array(const uint8_t *data, size_t len) override;
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
-  int available() override;
+  size_t available() override;
   void flush() override;
   void set_name(std::string port_name) { port_name_ = port_name; };
 

esphome/components/uart/uart_component_libretiny.cpp

@@ -169,7 +169,7 @@ bool LibreTinyUARTComponent::read_array(uint8_t *data, size_t len) {
   return true;
 }
 
-int LibreTinyUARTComponent::available() { return this->serial_->available(); }
+size_t LibreTinyUARTComponent::available() { return this->serial_->available(); }
 void LibreTinyUARTComponent::flush() {
   ESP_LOGVV(TAG, "    Flushing");
   this->serial_->flush();

esphome/components/uart/uart_component_libretiny.h

@@ -21,7 +21,7 @@ class LibreTinyUARTComponent : public UARTComponent, public Component {
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
 
-  int available() override;
+  size_t available() override;
   void flush() override;
 
   uint16_t get_config();

esphome/components/uart/uart_component_rp2040.cpp

@@ -186,7 +186,7 @@ bool RP2040UartComponent::read_array(uint8_t *data, size_t len) {
 #endif
   return true;
 }
-int RP2040UartComponent::available() { return this->serial_->available(); }
+size_t RP2040UartComponent::available() { return this->serial_->available(); }
 void RP2040UartComponent::flush() {
   ESP_LOGVV(TAG, "    Flushing");
   this->serial_->flush();

esphome/components/uart/uart_component_rp2040.h

@@ -24,7 +24,7 @@ class RP2040UartComponent : public UARTComponent, public Component {
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
 
-  int available() override;
+  size_t available() override;
   void flush() override;
 
   uint16_t get_config();

esphome/components/usb_cdc_acm/usb_cdc_acm.h

@@ -81,7 +81,7 @@ class USBCDCACMInstance : public uart::UARTComponent, public Parented<USBCDCACMC
   void write_array(const uint8_t *data, size_t len) override;
   bool peek_byte(uint8_t *data) override;
   bool read_array(uint8_t *data, size_t len) override;
-  int available() override;
+  size_t available() override;
   void flush() override;
 
  protected:

esphome/components/usb_cdc_acm/usb_cdc_acm_esp32.cpp

@@ -318,12 +318,12 @@ bool USBCDCACMInstance::read_array(uint8_t *data, size_t len) {
   return bytes_read == original_len;
 }
 
-int USBCDCACMInstance::available() {
+size_t USBCDCACMInstance::available() {
   UBaseType_t waiting = 0;
   if (this->usb_rx_ringbuf_ != nullptr) {
     vRingbufferGetInfo(this->usb_rx_ringbuf_, nullptr, nullptr, nullptr, nullptr, &waiting);
   }
-  return static_cast<int>(waiting) + (this->has_peek_ ? 1 : 0);
+  return waiting + (this->has_peek_ ? 1 : 0);
 }
 
 void USBCDCACMInstance::flush() {

esphome/components/usb_uart/usb_uart.h

@@ -97,7 +97,7 @@ class USBUartChannel : public uart::UARTComponent, public Parented<USBUartCompon
   bool peek_byte(uint8_t *data) override;
   ;
   bool read_array(uint8_t *data, size_t len) override;
-  int available() override { return static_cast<int>(this->input_buffer_.get_available()); }
+  size_t available() override { return this->input_buffer_.get_available(); }
   void flush() override {}
   void check_logger_conflict() override {}
   void set_parity(UARTParityOptions parity) { this->parity_ = parity; }

esphome/components/voice_assistant/__init__.py

@@ -371,7 +371,12 @@ async def to_code(config):
     if on_timer_tick := config.get(CONF_ON_TIMER_TICK):
         await automation.build_automation(
             var.get_timer_tick_trigger(),
-            [(cg.std_vector.template(Timer), "timers")],
+            [
+                (
+                    cg.std_vector.template(Timer).operator("const").operator("ref"),
+                    "timers",
+                )
+            ],
             on_timer_tick,
         )
         has_timers = True

esphome/components/voice_assistant/voice_assistant.cpp

@@ -859,35 +859,43 @@ void VoiceAssistant::on_audio(const api::VoiceAssistantAudio &msg) {
 }
 
 void VoiceAssistant::on_timer_event(const api::VoiceAssistantTimerEventResponse &msg) {
-  Timer timer = {
-      .id = msg.timer_id,
-      .name = msg.name,
-      .total_seconds = msg.total_seconds,
-      .seconds_left = msg.seconds_left,
-      .is_active = msg.is_active,
-  };
-  this->timers_[timer.id] = timer;
+  // Find existing timer or add a new one
+  auto it = this->timers_.begin();
+  for (; it != this->timers_.end(); ++it) {
+    if (it->id == msg.timer_id)
+      break;
+  }
+  if (it == this->timers_.end()) {
+    this->timers_.push_back({});
+    it = this->timers_.end() - 1;
+  }
+  it->id = msg.timer_id;
+  it->name = msg.name;
+  it->total_seconds = msg.total_seconds;
+  it->seconds_left = msg.seconds_left;
+  it->is_active = msg.is_active;
+
   char timer_buf[Timer::TO_STR_BUFFER_SIZE];
   ESP_LOGD(TAG,
            "Timer Event\n"
            "  Type: %" PRId32 "\n"
            "  %s",
-           msg.event_type, timer.to_str(timer_buf));
+           msg.event_type, it->to_str(timer_buf));
 
   switch (msg.event_type) {
     case api::enums::VOICE_ASSISTANT_TIMER_STARTED:
-      this->timer_started_trigger_.trigger(timer);
+      this->timer_started_trigger_.trigger(*it);
       break;
     case api::enums::VOICE_ASSISTANT_TIMER_UPDATED:
-      this->timer_updated_trigger_.trigger(timer);
+      this->timer_updated_trigger_.trigger(*it);
       break;
     case api::enums::VOICE_ASSISTANT_TIMER_CANCELLED:
-      this->timer_cancelled_trigger_.trigger(timer);
-      this->timers_.erase(timer.id);
+      this->timer_cancelled_trigger_.trigger(*it);
+      this->timers_.erase(it);
       break;
     case api::enums::VOICE_ASSISTANT_TIMER_FINISHED:
-      this->timer_finished_trigger_.trigger(timer);
-      this->timers_.erase(timer.id);
+      this->timer_finished_trigger_.trigger(*it);
+      this->timers_.erase(it);
       break;
   }
 
@@ -901,16 +909,12 @@ void VoiceAssistant::on_timer_event(const api::VoiceAssistantTimerEventResponse
 }
 
 void VoiceAssistant::timer_tick_() {
-  std::vector<Timer> res;
-  res.reserve(this->timers_.size());
-  for (auto &pair : this->timers_) {
-    auto &timer = pair.second;
+  for (auto &timer : this->timers_) {
     if (timer.is_active && timer.seconds_left > 0) {
       timer.seconds_left--;
     }
-    res.push_back(timer);
   }
-  this->timer_tick_trigger_.trigger(res);
+  this->timer_tick_trigger_.trigger(this->timers_);
 }
 
 void VoiceAssistant::on_announce(const api::VoiceAssistantAnnounceRequest &msg) {

esphome/components/voice_assistant/voice_assistant.h

@@ -24,7 +24,6 @@
 #include "esphome/components/socket/socket.h"
 
 #include <span>
-#include <unordered_map>
 #include <vector>
 
 namespace esphome {
@@ -226,9 +225,9 @@ class VoiceAssistant : public Component {
   Trigger<Timer> *get_timer_updated_trigger() { return &this->timer_updated_trigger_; }
   Trigger<Timer> *get_timer_cancelled_trigger() { return &this->timer_cancelled_trigger_; }
   Trigger<Timer> *get_timer_finished_trigger() { return &this->timer_finished_trigger_; }
-  Trigger<std::vector<Timer>> *get_timer_tick_trigger() { return &this->timer_tick_trigger_; }
+  Trigger<const std::vector<Timer> &> *get_timer_tick_trigger() { return &this->timer_tick_trigger_; }
   void set_has_timers(bool has_timers) { this->has_timers_ = has_timers; }
-  const std::unordered_map<std::string, Timer> &get_timers() const { return this->timers_; }
+  const std::vector<Timer> &get_timers() const { return this->timers_; }
 
  protected:
   bool allocate_buffers_();
@@ -267,13 +266,13 @@ class VoiceAssistant : public Component {
 
   api::APIConnection *api_client_{nullptr};
 
-  std::unordered_map<std::string, Timer> timers_;
+  std::vector<Timer> timers_;
   void timer_tick_();
   Trigger<Timer> timer_started_trigger_;
   Trigger<Timer> timer_finished_trigger_;
   Trigger<Timer> timer_updated_trigger_;
   Trigger<Timer> timer_cancelled_trigger_;
-  Trigger<std::vector<Timer>> timer_tick_trigger_;
+  Trigger<const std::vector<Timer> &> timer_tick_trigger_;
   bool has_timers_{false};
   bool timer_tick_running_{false};
 

esphome/components/water_heater/water_heater.h

@@ -90,9 +90,22 @@ class WaterHeaterCall {
   float get_target_temperature_low() const { return this->target_temperature_low_; }
   float get_target_temperature_high() const { return this->target_temperature_high_; }
   /// Get state flags value
+  ESPDEPRECATED("get_state() is deprecated, use get_away() and get_on() instead. (Removed in 2026.8.0)", "2026.2.0")
   uint32_t get_state() const { return this->state_; }
-  /// Get mask of state flags that are being changed
-  uint32_t get_state_mask() const { return this->state_mask_; }
+
+  optional<bool> get_away() const {
+    if (this->state_mask_ & WATER_HEATER_STATE_AWAY) {
+      return (this->state_ & WATER_HEATER_STATE_AWAY) != 0;
+    }
+    return {};
+  }
+
+  optional<bool> get_on() const {
+    if (this->state_mask_ & WATER_HEATER_STATE_ON) {
+      return (this->state_ & WATER_HEATER_STATE_ON) != 0;
+    }
+    return {};
+  }
 
  protected:
   void validate_();

esphome/components/weikai/weikai.cpp

@@ -401,7 +401,7 @@ bool WeikaiChannel::peek_byte(uint8_t *buffer) {
   return this->receive_buffer_.peek(*buffer);
 }
 
-int WeikaiChannel::available() {
+size_t WeikaiChannel::available() {
   size_t available = this->receive_buffer_.count();
   if (!available)
     available = xfer_fifo_to_buffer_();

esphome/components/weikai/weikai.h

@@ -374,7 +374,7 @@ class WeikaiChannel : public uart::UARTComponent {
 
   /// @brief Returns the number of bytes in the receive buffer
   /// @return the number of bytes available in the receiver fifo
-  int available() override;
+  size_t available() override;
 
   /// @brief Flush the output fifo.
   /// @details If we refer to Serial.flush() in Arduino it says: ** Waits for the transmission of outgoing serial data

esphome/components/zigbee/zigbee_zephyr.cpp

@@ -3,6 +3,7 @@
 #include "esphome/core/log.h"
 #include <zephyr/settings/settings.h>
 #include <zephyr/storage/flash_map.h>
+#include "esphome/core/hal.h"
 
 extern "C" {
 #include <zboss_api.h>
@@ -223,6 +224,7 @@ void ZigbeeComponent::dump_config() {
                 get_wipe_on_boot(), YESNO(zb_zdo_joined()), zb_get_current_channel(), zb_get_current_page(),
                 zb_get_sleep_threshold(), role(), ieee_addr_buf, zb_get_short_address(), extended_pan_id_buf,
                 zb_get_pan_id());
+  dump_reporting_();
 }
 
 static void send_attribute_report(zb_bufid_t bufid, zb_uint16_t cmd_id) {
@@ -244,6 +246,33 @@ void ZigbeeComponent::factory_reset() {
   ZB_SCHEDULE_APP_CALLBACK(zb_bdb_reset_via_local_action, 0);
 }
 
+void ZigbeeComponent::dump_reporting_() {
+#ifdef ESPHOME_LOG_HAS_VERBOSE
+  auto now = millis();
+  bool first = true;
+  for (zb_uint8_t j = 0; j < ZCL_CTX().device_ctx->ep_count; j++) {
+    if (ZCL_CTX().device_ctx->ep_desc_list[j]->reporting_info) {
+      zb_zcl_reporting_info_t *rep_info = ZCL_CTX().device_ctx->ep_desc_list[j]->reporting_info;
+      for (zb_uint8_t i = 0; i < ZCL_CTX().device_ctx->ep_desc_list[j]->rep_info_count; i++) {
+        if (!first) {
+          ESP_LOGV(TAG, "");
+        }
+        first = false;
+        ESP_LOGV(TAG, "Endpoint: %d, cluster_id %d, attr_id %d, flags %d, report in %ums", rep_info->ep,
+                 rep_info->cluster_id, rep_info->attr_id, rep_info->flags,
+                 ZB_ZCL_GET_REPORTING_FLAG(rep_info, ZB_ZCL_REPORT_TIMER_STARTED)
+                     ? ZB_TIME_BEACON_INTERVAL_TO_MSEC(rep_info->run_time) - now
+                     : 0);
+        ESP_LOGV(TAG, "Min_interval %ds, max_interval %ds, def_min_interval %ds, def_max_interval %ds",
+                 rep_info->u.send_info.min_interval, rep_info->u.send_info.max_interval,
+                 rep_info->u.send_info.def_min_interval, rep_info->u.send_info.def_max_interval);
+        rep_info++;
+      }
+    }
+  }
+#endif
+}
+
 }  // namespace esphome::zigbee
 
 extern "C" void zboss_signal_handler(zb_uint8_t param) {

esphome/components/zigbee/zigbee_zephyr.h

@@ -87,6 +87,7 @@ class ZigbeeComponent : public Component {
 #ifdef USE_ZIGBEE_WIPE_ON_BOOT
   void erase_flash_(int area);
 #endif
+  void dump_reporting_();
   std::array<std::function<void(zb_bufid_t bufid)>, ZIGBEE_ENDPOINTS_COUNT> callbacks_{};
   CallbackManager<void()> join_cb_;
   Trigger<> join_trigger_;

pyproject.toml

@@ -1,5 +1,5 @@
 [build-system]
-requires = ["setuptools==80.10.2", "wheel>=0.43,<0.47"]
+requires = ["setuptools==82.0.0", "wheel>=0.43,<0.47"]
 build-backend = "setuptools.build_meta"
 
 [project]

tests/components/mipi_rgb/common.yaml

@@ -0,0 +1,52 @@
+display:
+  - platform: mipi_rgb
+    spi_id: spi_bus
+    model: ZX2D10GE01R-V4848
+    update_interval: 1s
+    color_order: BGR
+    draw_rounding: 2
+    pixel_mode: 18bit
+    invert_colors: false
+    use_axis_flips: true
+    pclk_frequency: 15000000.0
+    pclk_inverted: true
+    byte_order: big_endian
+    hsync_pulse_width: 10
+    hsync_back_porch: 10
+    hsync_front_porch: 10
+    vsync_pulse_width: 2
+    vsync_back_porch: 12
+    vsync_front_porch: 14
+    data_pins:
+      red:
+        - number: 10
+        - number: 16
+        - number: 9
+        - number: 15
+        - number: 46
+      green:
+        - number: 8
+        - number: 13
+        - number: 18
+        - number: 12
+        - number: 11
+        - number: 17
+      blue:
+        - number: 47
+        - number: 1
+        - number: 0
+        - number: 42
+        - number: 14
+    de_pin:
+      number: 39
+    pclk_pin:
+      number: 45
+    hsync_pin:
+      number: 38
+    vsync_pin:
+      number: 48
+    data_rate: 1000000.0
+    spi_mode: MODE0
+    cs_pin:
+      number: 21
+    show_test_card: true

tests/components/mipi_rgb/test.esp32-p4-idf.yaml

@@ -0,0 +1,6 @@
+packages:
+  spi: !include ../../test_build_components/common/spi/esp32-p4-idf.yaml
+
+psram:
+
+<<: !include common.yaml

tests/components/mipi_rgb/test.esp32-s3-idf.yaml

@@ -4,58 +4,4 @@ packages:
 psram:
   mode: octal
 
-display:
-  - platform: mipi_rgb
-    spi_id: spi_bus
-    model: ZX2D10GE01R-V4848
-    update_interval: 1s
-    color_order: BGR
-    draw_rounding: 2
-    pixel_mode: 18bit
-    invert_colors: false
-    use_axis_flips: true
-    pclk_frequency: 15000000.0
-    pclk_inverted: true
-    byte_order: big_endian
-    hsync_pulse_width: 10
-    hsync_back_porch: 10
-    hsync_front_porch: 10
-    vsync_pulse_width: 2
-    vsync_back_porch: 12
-    vsync_front_porch: 14
-    data_pins:
-      red:
-        - number: 10
-        - number: 16
-        - number: 9
-        - number: 15
-        - number: 46
-          ignore_strapping_warning: true
-      green:
-        - number: 8
-        - number: 13
-        - number: 18
-        - number: 12
-        - number: 11
-        - number: 17
-      blue:
-        - number: 47
-        - number: 1
-        - number: 0
-          ignore_strapping_warning: true
-        - number: 42
-        - number: 14
-    de_pin:
-      number: 39
-    pclk_pin:
-      number: 45
-      ignore_strapping_warning: true
-    hsync_pin:
-      number: 38
-    vsync_pin:
-      number: 48
-    data_rate: 1000000.0
-    spi_mode: MODE0
-    cs_pin:
-      number: 21
-    show_test_card: true
+<<: !include common.yaml

tests/components/uart/common.h

@@ -29,7 +29,7 @@ class MockUARTComponent : public UARTComponent {
 
   MOCK_METHOD(bool, read_array, (uint8_t * data, size_t len), (override));
   MOCK_METHOD(bool, peek_byte, (uint8_t * data), (override));
-  MOCK_METHOD(int, available, (), (override));
+  MOCK_METHOD(size_t, available, (), (override));
   MOCK_METHOD(void, flush, (), (override));
   MOCK_METHOD(void, check_logger_conflict, (), (override));
 };

tests/components/voice_assistant/common-idf.yaml

@@ -68,3 +68,24 @@ voice_assistant:
     - logger.log:
         format: "Voice assistant error - code %s, message: %s"
         args: [code.c_str(), message.c_str()]
+  on_timer_started:
+    - logger.log:
+        format: "Timer started: %s"
+        args: [timer.id.c_str()]
+  on_timer_updated:
+    - logger.log:
+        format: "Timer updated: %s"
+        args: [timer.id.c_str()]
+  on_timer_cancelled:
+    - logger.log:
+        format: "Timer cancelled: %s"
+        args: [timer.id.c_str()]
+  on_timer_finished:
+    - logger.log:
+        format: "Timer finished: %s"
+        args: [timer.id.c_str()]
+  on_timer_tick:
+    - lambda: |-
+        for (auto &timer : timers) {
+          ESP_LOGD("timer", "Timer %s: %" PRIu32 "s left", timer.name.c_str(), timer.seconds_left);
+        }

tests/components/voice_assistant/common.yaml

@@ -58,3 +58,24 @@ voice_assistant:
     - logger.log:
         format: "Voice assistant error - code %s, message: %s"
         args: [code.c_str(), message.c_str()]
+  on_timer_started:
+    - logger.log:
+        format: "Timer started: %s"
+        args: [timer.id.c_str()]
+  on_timer_updated:
+    - logger.log:
+        format: "Timer updated: %s"
+        args: [timer.id.c_str()]
+  on_timer_cancelled:
+    - logger.log:
+        format: "Timer cancelled: %s"
+        args: [timer.id.c_str()]
+  on_timer_finished:
+    - logger.log:
+        format: "Timer finished: %s"
+        args: [timer.id.c_str()]
+  on_timer_tick:
+    - lambda: |-
+        for (auto &timer : timers) {
+          ESP_LOGD("timer", "Timer %s: %" PRIu32 "s left", timer.name.c_str(), timer.seconds_left);
+        }

tests/test_build_components/common/spi/esp32-p4-idf.yaml

@@ -0,0 +1,12 @@
+# Common SPI configuration for ESP32-P4 IDF tests
+
+substitutions:
+  clk_pin: GPIO36
+  mosi_pin: GPIO32
+  miso_pin: GPIO33
+
+spi:
+  - id: spi_bus
+    clk_pin: ${clk_pin}
+    mosi_pin: ${mosi_pin}
+    miso_pin: ${miso_pin}