[uart] Convert parity_to_str to PROGMEM_STRING_TABLE

.clang-tidy.hash

@@ -1 +1 @@
-37ec8d5a343c8d0a485fd2118cbdabcbccd7b9bca197e4a392be75087974dced
+069fa9526c52f7c580a9ec17c7678d12f142221387e9b561c18f95394d4629a3

esphome/codegen.py

@@ -87,7 +87,6 @@ from esphome.cpp_types import (  # noqa: F401
     size_t,
     std_ns,
     std_shared_ptr,
-    std_span,
     std_string,
     std_string_ref,
     std_vector,

esphome/components/dsmr/__init__.py

@@ -66,7 +66,7 @@ async def to_code(config):
     cg.add_build_flag("-DDSMR_WATER_MBUS_ID=" + str(config[CONF_WATER_MBUS_ID]))
 
     # DSMR Parser
-    cg.add_library("esphome/dsmr_parser", "1.1.0")
+    cg.add_library("esphome/dsmr_parser", "1.0.0")
 
     # Crypto
     cg.add_library("polargoose/Crypto-no-arduino", "0.4.0")

esphome/components/dsmr/sensor.py

@@ -718,6 +718,14 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
+        cv.Optional("fw_core_version"): sensor.sensor_schema(
+            accuracy_decimals=3,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
+        cv.Optional("fw_module_version"): sensor.sensor_schema(
+            accuracy_decimals=3,
+            state_class=STATE_CLASS_MEASUREMENT,
+        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 

esphome/components/dsmr/text_sensor.py

@@ -26,9 +26,7 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional("sub_equipment_id"): text_sensor.text_sensor_schema(),
         cv.Optional("gas_delivered_text"): text_sensor.text_sensor_schema(),
         cv.Optional("fw_core_checksum"): text_sensor.text_sensor_schema(),
-        cv.Optional("fw_core_version"): text_sensor.text_sensor_schema(),
         cv.Optional("fw_module_checksum"): text_sensor.text_sensor_schema(),
-        cv.Optional("fw_module_version"): text_sensor.text_sensor_schema(),
         cv.Optional("telegram"): text_sensor.text_sensor_schema().extend(
             {cv.Optional(CONF_INTERNAL, default=True): cv.boolean}
         ),

esphome/components/epaper_spi/colorconv.h

@@ -1,67 +0,0 @@
-#pragma once
-
-#include <cstdint>
-#include <algorithm>
-#include "esphome/core/color.h"
-
-/* Utility for converting internal \a Color RGB representation to supported IC hardware color keys
- *
- * Focus in driver layer is on efficiency.
- * For optimum output quality on RGB inputs consider offline color keying/dithering.
- * Also see e.g. Image component.
- */
-
-namespace esphome::epaper_spi {
-
-/** Delta for when to regard as gray */
-static constexpr uint8_t COLORCONV_GRAY_THRESHOLD = 50;
-
-/** Map RGB color to discrete BWYR hex 4 color key
- *
- * @tparam NATIVE_COLOR  Type of native hardware color values
- * @param color     RGB color to convert from
- * @param hw_black  Native value for black
- * @param hw_white  Native value for white
- * @param hw_yellow Native value for yellow
- * @param hw_red    Native value for red
- * @return          Converted native hardware color value
- * @internal Constexpr. Does not depend on side effects ("pure").
- */
-template<typename NATIVE_COLOR>
-constexpr NATIVE_COLOR color_to_bwyr(Color color, NATIVE_COLOR hw_black, NATIVE_COLOR hw_white, NATIVE_COLOR hw_yellow,
-                                     NATIVE_COLOR hw_red) {
-  // --- Step 1: Check for Grayscale (Black or White) ---
-  // We define "grayscale" as a color where the min and max components
-  // are close to each other.
-
-  const auto [min_rgb, max_rgb] = std::minmax({color.r, color.g, color.b});
-
-  if ((max_rgb - min_rgb) < COLORCONV_GRAY_THRESHOLD) {
-    // It's a shade of gray. Map to BLACK or WHITE.
-    // We split the luminance at the halfway point (382 = (255*3)/2)
-    if ((static_cast<int>(color.r) + color.g + color.b) > 382) {
-      return hw_white;
-    }
-    return hw_black;
-  }
-
-  // --- Step 2: Check for Primary/Secondary Colors ---
-  // If it's not gray, it's a color. We check which components are
-  // "on" (over 128) vs "off". This divides the RGB cube into 8 corners.
-  const bool r_on = (color.r > 128);
-  const bool g_on = (color.g > 128);
-  const bool b_on = (color.b > 128);
-
-  if (r_on) {
-    if (!b_on) {
-      return g_on ? hw_yellow : hw_red;
-    }
-
-    // At least red+blue high (but not gray) -> White
-    return hw_white;
-  } else {
-    return (b_on && g_on) ? hw_white : hw_black;
-  }
-}
-
-}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/epaper_spi_jd79660.cpp

@@ -1,227 +0,0 @@
-#include "epaper_spi_jd79660.h"
-#include "colorconv.h"
-
-#include "esphome/core/log.h"
-
-namespace esphome::epaper_spi {
-static constexpr const char *const TAG = "epaper_spi.jd79660";
-
-/** Pixel color as 2bpp. Must match IC LUT values. */
-enum JD79660Color : uint8_t {
-  BLACK = 0b00,
-  WHITE = 0b01,
-  YELLOW = 0b10,
-  RED = 0b11,
-};
-
-/** Map RGB color to JD79660 BWYR hex color keys */
-static JD79660Color HOT color_to_hex(Color color) {
-  return color_to_bwyr(color, JD79660Color::BLACK, JD79660Color::WHITE, JD79660Color::YELLOW, JD79660Color::RED);
-}
-
-void EPaperJD79660::fill(Color color) {
-  // If clipping is active, fall back to base implementation
-  if (this->get_clipping().is_set()) {
-    EPaperBase::fill(color);
-    return;
-  }
-
-  const auto pixel_color = color_to_hex(color);
-
-  // We store 4 pixels per byte
-  this->buffer_.fill(pixel_color | (pixel_color << 2) | (pixel_color << 4) | (pixel_color << 6));
-}
-
-void HOT EPaperJD79660::draw_pixel_at(int x, int y, Color color) {
-  if (!this->rotate_coordinates_(x, y))
-    return;
-  const auto pixel_bits = color_to_hex(color);
-  const uint32_t pixel_position = x + y * this->get_width_internal();
-  // We store 4 pixels per byte at LSB offsets 6, 4, 2, 0
-  const uint32_t byte_position = pixel_position / 4;
-  const uint32_t bit_offset = 6 - ((pixel_position % 4) * 2);
-  const auto original = this->buffer_[byte_position];
-
-  this->buffer_[byte_position] = (original & (~(0b11 << bit_offset))) |  // mask old 2bpp
-                                 (pixel_bits << bit_offset);             // add new 2bpp
-}
-
-bool EPaperJD79660::reset() {
-  // On entry state RESET set step, next state will be RESET_END
-  if (this->state_ == EPaperState::RESET) {
-    this->step_ = FSMState::RESET_STEP0_H;
-  }
-
-  switch (this->step_) {
-    case FSMState::RESET_STEP0_H:
-      // Step #0: Reset H for some settle time.
-
-      ESP_LOGVV(TAG, "reset #0");
-      this->reset_pin_->digital_write(true);
-
-      this->reset_duration_ = SLEEP_MS_RESET0;
-      this->step_ = FSMState::RESET_STEP1_L;
-      return false;  // another loop: step #1 below
-
-    case FSMState::RESET_STEP1_L:
-      // Step #1: Reset L pulse for slightly >1.5ms.
-      // This is actual reset trigger.
-
-      ESP_LOGVV(TAG, "reset #1");
-
-      // As commented on SLEEP_MS_RESET1: Reset pulse must happen within time window.
-      // So do not use FSM loop, and avoid other calls/logs during pulse below.
-      this->reset_pin_->digital_write(false);
-      delay(SLEEP_MS_RESET1);
-      this->reset_pin_->digital_write(true);
-
-      this->reset_duration_ = SLEEP_MS_RESET2;
-      this->step_ = FSMState::RESET_STEP2_IDLECHECK;
-      return false;  // another loop: step #2 below
-
-    case FSMState::RESET_STEP2_IDLECHECK:
-      // Step #2: Basically finished. Check sanity, and move FSM to INITIALISE state
-      ESP_LOGVV(TAG, "reset #2");
-
-      if (!this->is_idle_()) {
-        // Expectation: Idle after reset + settle time.
-        // Improperly connected/unexpected hardware?
-        // Error path reproducable e.g. with disconnected VDD/... pins
-        // (optimally while busy_pin configured with local pulldown).
-        // -> Mark failed to avoid followup problems.
-        this->mark_failed(LOG_STR("Busy after reset"));
-      }
-      break;  // End state loop below
-
-    default:
-      // Unexpected step = bug?
-      this->mark_failed();
-  }
-
-  this->step_ = FSMState::INIT_STEP0_REGULARINIT;  // reset for initialize state
-  return true;
-}
-
-bool EPaperJD79660::initialise(bool partial) {
-  switch (this->step_) {
-    case FSMState::INIT_STEP0_REGULARINIT:
-      // Step #0: Regular init sequence
-      ESP_LOGVV(TAG, "init #0");
-      if (!EPaperBase::initialise(partial)) {  // Call parent impl
-        return false;                          // If parent should request another loop, do so
-      }
-
-      // Fast init requested + supported?
-      if (partial && (this->fast_update_length_ > 0)) {
-        this->step_ = FSMState::INIT_STEP1_FASTINIT;
-        this->wait_for_idle_(true);  // Must wait for idle before fastinit sequence in next loop
-        return false;                // another loop: step #1 below
-      }
-
-      break;  // End state loop below
-
-    case FSMState::INIT_STEP1_FASTINIT:
-      // Step #1: Fast init sequence
-      ESP_LOGVV(TAG, "init #1");
-      this->write_fastinit_();
-      break;  // End state loop below
-
-    default:
-      // Unexpected step = bug?
-      this->mark_failed();
-  }
-
-  this->step_ = FSMState::NONE;
-  return true;  // Finished: State transition waits for idle
-}
-
-bool EPaperJD79660::transfer_buffer_chunks_() {
-  size_t buf_idx = 0;
-  uint8_t bytes_to_send[MAX_TRANSFER_SIZE];
-  const uint32_t start_time = App.get_loop_component_start_time();
-  const auto buffer_length = this->buffer_length_;
-  while (this->current_data_index_ != buffer_length) {
-    bytes_to_send[buf_idx++] = this->buffer_[this->current_data_index_++];
-
-    if (buf_idx == sizeof bytes_to_send) {
-      this->start_data_();
-      this->write_array(bytes_to_send, buf_idx);
-      this->disable();
-      ESP_LOGVV(TAG, "Wrote %zu bytes at %ums", buf_idx, (unsigned) millis());
-      buf_idx = 0;
-
-      if (millis() - start_time > MAX_TRANSFER_TIME) {
-        // Let the main loop run and come back next loop
-        return false;
-      }
-    }
-  }
-
-  // Finished the entire dataset
-  if (buf_idx != 0) {
-    this->start_data_();
-    this->write_array(bytes_to_send, buf_idx);
-    this->disable();
-    ESP_LOGVV(TAG, "Wrote %zu bytes at %ums", buf_idx, (unsigned) millis());
-  }
-  // Cleanup for next transfer
-  this->current_data_index_ = 0;
-
-  // Finished with all buffer chunks
-  return true;
-}
-
-void EPaperJD79660::write_fastinit_() {
-  // Undocumented register sequence in vendor register range.
-  // Related to Fast Init/Update.
-  // Should likely happen after regular init seq and power on, but before refresh.
-  // Might only work for some models with certain factory MTP.
-  // Please do not change without knowledge to avoid breakage.
-
-  this->send_init_sequence_(this->fast_update_, this->fast_update_length_);
-}
-
-bool EPaperJD79660::transfer_data() {
-  // For now always send full frame buffer in chunks.
-  // JD79660 might support partial window transfers. But sample code missing.
-  // And likely minimal impact, solely on SPI transfer time into RAM.
-
-  if (this->current_data_index_ == 0) {
-    this->command(CMD_TRANSFER);
-  }
-
-  return this->transfer_buffer_chunks_();
-}
-
-void EPaperJD79660::refresh_screen([[maybe_unused]] bool partial) {
-  ESP_LOGV(TAG, "Refresh");
-  this->cmd_data(CMD_REFRESH, {(uint8_t) 0x00});
-}
-
-void EPaperJD79660::power_off() {
-  ESP_LOGV(TAG, "Power off");
-  this->cmd_data(CMD_POWEROFF, {(uint8_t) 0x00});
-}
-
-void EPaperJD79660::deep_sleep() {
-  ESP_LOGV(TAG, "Deep sleep");
-  // "Deepsleep between update": Ensure EPD sleep to avoid early hardware wearout!
-  this->cmd_data(CMD_DEEPSLEEP, {(uint8_t) 0xA5});
-
-  // Notes:
-  // - VDD: Some boards (Waveshare) with "clever reset logic" would allow switching off
-  //   EPD VDD by pulling reset pin low for longer time.
-  //   However, a) not all boards have this, b) reliable sequence timing is difficult,
-  //   c) saving is not worth it after deepsleep command above.
-  //   If needed: Better option is to drive VDD via MOSFET with separate enable pin.
-  //
-  // - Possible safe shutdown:
-  //   EPaperBase::on_safe_shutdown() may also trigger deep_sleep() again.
-  //   Regularly, in IDLE state, this does not make sense for this "deepsleep between update" model,
-  //   but SPI sequence should simply be ignored by sleeping receiver.
-  //   But if triggering during lengthy update, this quick SPI sleep sequence may have benefit.
-  //   Optimally, EPDs should even be set all white for longer storage.
-  //   But full sequence (>15s) not possible w/o app logic.
-}
-
-}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/epaper_spi_jd79660.h

@@ -1,145 +0,0 @@
-#pragma once
-
-#include "epaper_spi.h"
-
-namespace esphome::epaper_spi {
-
-/**
- * JD7966x IC driver implementation
- *
- * Currently tested with:
- * - JD79660 (max res: 200x200)
- *
- * May also work for other JD7966x chipset family members with minimal adaptations.
- *
- * Capabilities:
- * - HW frame buffer layout:
- *   4 colors (gray0..3, commonly BWYR). Bytes consist of 4px/2bpp.
- *   Width must be rounded to multiple of 4.
- * - Fast init/update (shorter wave forms): Yes. Controlled by CONF_FULL_UPDATE_EVERY.
- *   Needs undocumented fastinit sequence, based on likely vendor specific MTP content.
- * - Partial transfer (transfer only changed window): No. Maybe possible by HW.
- * - Partial refresh (refresh only changed window): No. Likely HW limit.
- *
- * @internal \c final saves few bytes by devirtualization. Remove \c final when subclassing.
- */
-class EPaperJD79660 final : public EPaperBase {
- public:
-  EPaperJD79660(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
-                size_t init_sequence_length, const uint8_t *fast_update, uint16_t fast_update_length)
-      : EPaperBase(name, width, height, init_sequence, init_sequence_length, DISPLAY_TYPE_COLOR),
-        fast_update_(fast_update),
-        fast_update_length_(fast_update_length) {
-    this->row_width_ = (width + 3) / 4;  // Fix base class calc (2bpp instead of 1bpp)
-    this->buffer_length_ = this->row_width_ * height;
-  }
-
-  void fill(Color color) override;
-
- protected:
-  /** Draw colored pixel into frame buffer */
-  void draw_pixel_at(int x, int y, Color color) override;
-
-  /** Reset (multistep sequence)
-   * @pre this->reset_pin_ != nullptr // cv.Required check
-   * @post Should be idle on successful reset. Can mark failures.
-   */
-  bool reset() override;
-
-  /** Initialise (multistep sequence) */
-  bool initialise(bool partial) override;
-
-  /** Buffer transfer */
-  bool transfer_data() override;
-
-  /** Power on: Already part of init sequence (likely needed there before transferring buffers).
-   * So nothing to do in FSM state.
-   */
-  void power_on() override {}
-
-  /** Refresh screen
-   * @param partial Ignored: Needed earlier in \a ::initialize
-   * @pre Must be idle.
-   * @post Should return to idle later after processing.
-   */
-  void refresh_screen([[maybe_unused]] bool partial) override;
-
-  /** Power off
-   * @pre Must be idle.
-   * @post Should return to idle later after processing.
-   *       (latter will take long period like ~15-20s on actual refresh!)
-   */
-  void power_off() override;
-
-  /** Deepsleep: Must be used to avoid hardware wearout!
-   * @pre Must be idle.
-   * @post Will go busy, and not return idle till ::reset!
-   */
-  void deep_sleep() override;
-
-  /** Internal: Send fast init sequence via undocumented vendor registers
-   * @pre Must be directly after regular ::initialise sequence, before ::transfer_data
-   * @pre Must be idle.
-   * @post Should return to idle later after processing.
-   */
-  void write_fastinit_();
-
-  /** Internal: Send raw buffer in chunks
-   * \retval true Finished
-   * \retval false Loop time elapsed. Need to call again next loop.
-   */
-  bool transfer_buffer_chunks_();
-
-  /** @name IC commands @{ */
-  static constexpr uint8_t CMD_POWEROFF = 0x02;
-  static constexpr uint8_t CMD_DEEPSLEEP = 0x07;
-  static constexpr uint8_t CMD_TRANSFER = 0x10;
-  static constexpr uint8_t CMD_REFRESH = 0x12;
-  /** @} */
-
-  /** State machine constants for \a step_ */
-  enum class FSMState : uint8_t {
-    NONE = 0,  //!< Initial/default value: Unused
-
-    /* Reset state steps */
-    RESET_STEP0_H,
-    RESET_STEP1_L,
-    RESET_STEP2_IDLECHECK,
-
-    /* Init state steps */
-    INIT_STEP0_REGULARINIT,
-    INIT_STEP1_FASTINIT,
-  };
-
-  /** Wait time (millisec) for first reset phase: High
-   *
-   * Wait via FSM loop.
-   */
-  static constexpr uint16_t SLEEP_MS_RESET0 = 200;
-
-  /** Wait time (millisec) for second reset phase: Low
-   *
-   * Holding Reset Low too long may trigger "clever reset" logic
-   * of e.g. Waveshare Rev2 boards: VDD is shut down via MOSFET, and IC
-   * will not report idle anymore!
-   * FSM loop may spuriously increase delay, e.g. >16ms.
-   * Therefore, sync wait below, as allowed (code rule "delays > 10ms not permitted"),
-   * yet only slightly exceeding known IC min req of >1.5ms.
-   */
-  static constexpr uint16_t SLEEP_MS_RESET1 = 2;
-
-  /** Wait time (millisec) for third reset phase: High
-   *
-   * Wait via FSM loop.
-   */
-  static constexpr uint16_t SLEEP_MS_RESET2 = 200;
-
-  // properties initialised in the constructor
-  const uint8_t *const fast_update_{};
-  const uint16_t fast_update_length_{};
-
-  /** Counter for tracking substeps within FSM state */
-  FSMState step_{FSMState::NONE};
-};
-
-}  // namespace esphome::epaper_spi

esphome/components/epaper_spi/epaper_spi_spectra_e6.h

@@ -4,7 +4,7 @@
 
 namespace esphome::epaper_spi {
 
-class EPaperSpectraE6 final : public EPaperBase {
+class EPaperSpectraE6 : public EPaperBase {
  public:
   EPaperSpectraE6(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
                   size_t init_sequence_length)

esphome/components/epaper_spi/epaper_waveshare.h

@@ -6,7 +6,7 @@ namespace esphome::epaper_spi {
 /**
  * An epaper display that needs LUTs to be sent to it.
  */
-class EpaperWaveshare final : public EPaperMono {
+class EpaperWaveshare : public EPaperMono {
  public:
   EpaperWaveshare(const char *name, uint16_t width, uint16_t height, const uint8_t *init_sequence,
                   size_t init_sequence_length, const uint8_t *lut, size_t lut_length, const uint8_t *partial_lut,

esphome/components/epaper_spi/models/jd79660.py

@@ -1,86 +0,0 @@
-import esphome.codegen as cg
-from esphome.components.mipi import flatten_sequence
-import esphome.config_validation as cv
-from esphome.const import CONF_BUSY_PIN, CONF_RESET_PIN
-from esphome.core import ID
-
-from ..display import CONF_INIT_SEQUENCE_ID
-from . import EpaperModel
-
-
-class JD79660(EpaperModel):
-    def __init__(self, name, class_name="EPaperJD79660", fast_update=None, **kwargs):
-        super().__init__(name, class_name, **kwargs)
-        self.fast_update = fast_update
-
-    def option(self, name, fallback=cv.UNDEFINED) -> cv.Optional | cv.Required:
-        # Validate required pins, as C++ code will assume existence
-        if name in (CONF_RESET_PIN, CONF_BUSY_PIN):
-            return cv.Required(name)
-
-        # Delegate to parent
-        return super().option(name, fallback)
-
-    def get_constructor_args(self, config) -> tuple:
-        # Resembles init_sequence handling for fast_update config
-        if self.fast_update is None:
-            fast_update = cg.nullptr, 0
-        else:
-            flat_fast_update = flatten_sequence(self.fast_update)
-            fast_update = (
-                cg.static_const_array(
-                    ID(
-                        config[CONF_INIT_SEQUENCE_ID].id + "_fast_update", type=cg.uint8
-                    ),
-                    flat_fast_update,
-                ),
-                len(flat_fast_update),
-            )
-        return (*fast_update,)
-
-
-jd79660 = JD79660(
-    "jd79660",
-    # Specified refresh times are ~20s (full) or ~15s (fast) due to BWRY.
-    # So disallow low update intervals (with safety margin), to avoid e.g. FSM update loops.
-    # Even less frequent intervals (min/h) highly recommended to optimize lifetime!
-    minimum_update_interval="30s",
-    # SPI rate: From spec comparisons, IC should allow SCL write cycles up to 10MHz rate.
-    # Existing code samples also prefer 10MHz. So justifies as default.
-    # Decrease value further in user config if needed (e.g. poor cabling).
-    data_rate="10MHz",
-    # No need to set optional reset_duration:
-    # Code requires multistep reset sequence with precise timings
-    # according to data sheet or samples.
-)
-
-# Waveshare 1.54-G
-#
-# Device may have specific factory provisioned MTP content to facilitate vendor register features like fast init.
-# Vendor specific init derived from vendor sample code
-# <https://github.com/waveshareteam/e-Paper/blob/master/E-paper_Separate_Program/1in54_e-Paper_G/ESP32/EPD_1in54g.cpp>
-# Compatible MIT license, see esphome/LICENSE file.
-#
-# fmt: off
-jd79660.extend(
-    "Waveshare-1.54in-G",
-    width=200,
-    height=200,
-
-    initsequence=(
-        (0x4D, 0x78,),
-        (0x00, 0x0F, 0x29,),
-        (0x06, 0x0d, 0x12, 0x30, 0x20, 0x19, 0x2a, 0x22,),
-        (0x50, 0x37,),
-        (0x61, 200 // 256, 200 % 256, 200 // 256, 200 % 256,),  # RES: 200x200 fixed
-        (0xE9, 0x01,),
-        (0x30, 0x08,),
-        # Power On (0x04): Must be early part of init seq = Disabled later!
-        (0x04,),
-    ),
-    fast_update=(
-        (0xE0, 0x02,),
-        (0xE6, 0x5D,),
-        (0xA5, 0x00,),
-    ),
-)

esphome/components/logger/logger_zephyr.cpp

@@ -68,7 +68,7 @@ void HOT Logger::write_msg_(const char *msg, uint16_t len) {
 #ifdef CONFIG_PRINTK
   // Requires the debug component and an active SWD connection.
   // It is used for pyocd rtt -t nrf52840
-  printk("%.*s", static_cast<int>(len), msg);
+  k_str_out(const_cast<char *>(msg), len);
 #endif
   if (this->uart_dev_ == nullptr) {
     return;

esphome/components/lvgl/schemas.py

@@ -436,7 +436,6 @@ def container_schema(widget_type: WidgetType, extras=None):
     schema = schema.extend(widget_type.schema)
 
     def validator(value):
-        value = value or {}
         return append_layout_schema(schema, value)(value)
 
     return validator

esphome/components/mqtt/mqtt_alarm_control_panel.cpp

@@ -13,12 +13,31 @@ static const char *const TAG = "mqtt.alarm_control_panel";
 
 using namespace esphome::alarm_control_panel;
 
-// Alarm state MQTT strings indexed by AlarmControlPanelState enum (0-9)
-PROGMEM_STRING_TABLE(AlarmMqttStateStrings, "disarmed", "armed_home", "armed_away", "armed_night", "armed_vacation",
-                     "armed_custom_bypass", "pending", "arming", "disarming", "triggered", "unknown");
-
 static ProgmemStr alarm_state_to_mqtt_str(AlarmControlPanelState state) {
-  return AlarmMqttStateStrings::get_progmem_str(static_cast<uint8_t>(state), AlarmMqttStateStrings::LAST_INDEX);
+  switch (state) {
+    case ACP_STATE_DISARMED:
+      return ESPHOME_F("disarmed");
+    case ACP_STATE_ARMED_HOME:
+      return ESPHOME_F("armed_home");
+    case ACP_STATE_ARMED_AWAY:
+      return ESPHOME_F("armed_away");
+    case ACP_STATE_ARMED_NIGHT:
+      return ESPHOME_F("armed_night");
+    case ACP_STATE_ARMED_VACATION:
+      return ESPHOME_F("armed_vacation");
+    case ACP_STATE_ARMED_CUSTOM_BYPASS:
+      return ESPHOME_F("armed_custom_bypass");
+    case ACP_STATE_PENDING:
+      return ESPHOME_F("pending");
+    case ACP_STATE_ARMING:
+      return ESPHOME_F("arming");
+    case ACP_STATE_DISARMING:
+      return ESPHOME_F("disarming");
+    case ACP_STATE_TRIGGERED:
+      return ESPHOME_F("triggered");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
 MQTTAlarmControlPanelComponent::MQTTAlarmControlPanelComponent(AlarmControlPanel *alarm_control_panel)

esphome/components/mqtt/mqtt_client.cpp

@@ -8,7 +8,6 @@
 #include "esphome/core/entity_base.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
-#include "esphome/core/progmem.h"
 #include "esphome/core/version.h"
 #ifdef USE_LOGGER
 #include "esphome/components/logger/logger.h"
@@ -28,11 +27,6 @@ namespace esphome::mqtt {
 
 static const char *const TAG = "mqtt";
 
-// Disconnect reason strings indexed by MQTTClientDisconnectReason enum (0-8)
-PROGMEM_STRING_TABLE(MQTTDisconnectReasonStrings, "TCP disconnected", "Unacceptable Protocol Version",
-                     "Identifier Rejected", "Server Unavailable", "Malformed Credentials", "Not Authorized",
-                     "Not Enough Space", "TLS Bad Fingerprint", "DNS Resolve Error", "Unknown");
-
 MQTTClientComponent::MQTTClientComponent() {
   global_mqtt_client = this;
   char mac_addr[MAC_ADDRESS_BUFFER_SIZE];
@@ -354,8 +348,36 @@ void MQTTClientComponent::loop() {
   mqtt_backend_.loop();
 
   if (this->disconnect_reason_.has_value()) {
-    const LogString *reason_s = MQTTDisconnectReasonStrings::get_log_str(
-        static_cast<uint8_t>(*this->disconnect_reason_), MQTTDisconnectReasonStrings::LAST_INDEX);
+    const LogString *reason_s;
+    switch (*this->disconnect_reason_) {
+      case MQTTClientDisconnectReason::TCP_DISCONNECTED:
+        reason_s = LOG_STR("TCP disconnected");
+        break;
+      case MQTTClientDisconnectReason::MQTT_UNACCEPTABLE_PROTOCOL_VERSION:
+        reason_s = LOG_STR("Unacceptable Protocol Version");
+        break;
+      case MQTTClientDisconnectReason::MQTT_IDENTIFIER_REJECTED:
+        reason_s = LOG_STR("Identifier Rejected");
+        break;
+      case MQTTClientDisconnectReason::MQTT_SERVER_UNAVAILABLE:
+        reason_s = LOG_STR("Server Unavailable");
+        break;
+      case MQTTClientDisconnectReason::MQTT_MALFORMED_CREDENTIALS:
+        reason_s = LOG_STR("Malformed Credentials");
+        break;
+      case MQTTClientDisconnectReason::MQTT_NOT_AUTHORIZED:
+        reason_s = LOG_STR("Not Authorized");
+        break;
+      case MQTTClientDisconnectReason::ESP8266_NOT_ENOUGH_SPACE:
+        reason_s = LOG_STR("Not Enough Space");
+        break;
+      case MQTTClientDisconnectReason::TLS_BAD_FINGERPRINT:
+        reason_s = LOG_STR("TLS Bad Fingerprint");
+        break;
+      default:
+        reason_s = LOG_STR("Unknown");
+        break;
+    }
     if (!network::is_connected()) {
       reason_s = LOG_STR("WiFi disconnected");
     }

esphome/components/mqtt/mqtt_climate.cpp

@@ -13,44 +13,109 @@ static const char *const TAG = "mqtt.climate";
 
 using namespace esphome::climate;
 
-// Climate mode MQTT strings indexed by ClimateMode enum (0-6): OFF, HEAT_COOL, COOL, HEAT, FAN_ONLY, DRY, AUTO
-PROGMEM_STRING_TABLE(ClimateMqttModeStrings, "off", "heat_cool", "cool", "heat", "fan_only", "dry", "auto", "unknown");
-
 static ProgmemStr climate_mode_to_mqtt_str(ClimateMode mode) {
-  return ClimateMqttModeStrings::get_progmem_str(static_cast<uint8_t>(mode), ClimateMqttModeStrings::LAST_INDEX);
+  switch (mode) {
+    case CLIMATE_MODE_OFF:
+      return ESPHOME_F("off");
+    case CLIMATE_MODE_HEAT_COOL:
+      return ESPHOME_F("heat_cool");
+    case CLIMATE_MODE_AUTO:
+      return ESPHOME_F("auto");
+    case CLIMATE_MODE_COOL:
+      return ESPHOME_F("cool");
+    case CLIMATE_MODE_HEAT:
+      return ESPHOME_F("heat");
+    case CLIMATE_MODE_FAN_ONLY:
+      return ESPHOME_F("fan_only");
+    case CLIMATE_MODE_DRY:
+      return ESPHOME_F("dry");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
-// Climate action MQTT strings indexed by ClimateAction enum (0,2-6): OFF, (gap), COOLING, HEATING, IDLE, DRYING, FAN
-PROGMEM_STRING_TABLE(ClimateMqttActionStrings, "off", "unknown", "cooling", "heating", "idle", "drying", "fan",
-                     "unknown");
-
 static ProgmemStr climate_action_to_mqtt_str(ClimateAction action) {
-  return ClimateMqttActionStrings::get_progmem_str(static_cast<uint8_t>(action), ClimateMqttActionStrings::LAST_INDEX);
+  switch (action) {
+    case CLIMATE_ACTION_OFF:
+      return ESPHOME_F("off");
+    case CLIMATE_ACTION_COOLING:
+      return ESPHOME_F("cooling");
+    case CLIMATE_ACTION_HEATING:
+      return ESPHOME_F("heating");
+    case CLIMATE_ACTION_IDLE:
+      return ESPHOME_F("idle");
+    case CLIMATE_ACTION_DRYING:
+      return ESPHOME_F("drying");
+    case CLIMATE_ACTION_FAN:
+      return ESPHOME_F("fan");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
-// Climate fan mode MQTT strings indexed by ClimateFanMode enum (0-9)
-PROGMEM_STRING_TABLE(ClimateMqttFanModeStrings, "on", "off", "auto", "low", "medium", "high", "middle", "focus",
-                     "diffuse", "quiet", "unknown");
-
 static ProgmemStr climate_fan_mode_to_mqtt_str(ClimateFanMode fan_mode) {
-  return ClimateMqttFanModeStrings::get_progmem_str(static_cast<uint8_t>(fan_mode),
-                                                    ClimateMqttFanModeStrings::LAST_INDEX);
+  switch (fan_mode) {
+    case CLIMATE_FAN_ON:
+      return ESPHOME_F("on");
+    case CLIMATE_FAN_OFF:
+      return ESPHOME_F("off");
+    case CLIMATE_FAN_AUTO:
+      return ESPHOME_F("auto");
+    case CLIMATE_FAN_LOW:
+      return ESPHOME_F("low");
+    case CLIMATE_FAN_MEDIUM:
+      return ESPHOME_F("medium");
+    case CLIMATE_FAN_HIGH:
+      return ESPHOME_F("high");
+    case CLIMATE_FAN_MIDDLE:
+      return ESPHOME_F("middle");
+    case CLIMATE_FAN_FOCUS:
+      return ESPHOME_F("focus");
+    case CLIMATE_FAN_DIFFUSE:
+      return ESPHOME_F("diffuse");
+    case CLIMATE_FAN_QUIET:
+      return ESPHOME_F("quiet");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
-// Climate swing mode MQTT strings indexed by ClimateSwingMode enum (0-3): OFF, BOTH, VERTICAL, HORIZONTAL
-PROGMEM_STRING_TABLE(ClimateMqttSwingModeStrings, "off", "both", "vertical", "horizontal", "unknown");
-
 static ProgmemStr climate_swing_mode_to_mqtt_str(ClimateSwingMode swing_mode) {
-  return ClimateMqttSwingModeStrings::get_progmem_str(static_cast<uint8_t>(swing_mode),
-                                                      ClimateMqttSwingModeStrings::LAST_INDEX);
+  switch (swing_mode) {
+    case CLIMATE_SWING_OFF:
+      return ESPHOME_F("off");
+    case CLIMATE_SWING_BOTH:
+      return ESPHOME_F("both");
+    case CLIMATE_SWING_VERTICAL:
+      return ESPHOME_F("vertical");
+    case CLIMATE_SWING_HORIZONTAL:
+      return ESPHOME_F("horizontal");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
-// Climate preset MQTT strings indexed by ClimatePreset enum (0-7)
-PROGMEM_STRING_TABLE(ClimateMqttPresetStrings, "none", "home", "away", "boost", "comfort", "eco", "sleep", "activity",
-                     "unknown");
-
 static ProgmemStr climate_preset_to_mqtt_str(ClimatePreset preset) {
-  return ClimateMqttPresetStrings::get_progmem_str(static_cast<uint8_t>(preset), ClimateMqttPresetStrings::LAST_INDEX);
+  switch (preset) {
+    case CLIMATE_PRESET_NONE:
+      return ESPHOME_F("none");
+    case CLIMATE_PRESET_HOME:
+      return ESPHOME_F("home");
+    case CLIMATE_PRESET_ECO:
+      return ESPHOME_F("eco");
+    case CLIMATE_PRESET_AWAY:
+      return ESPHOME_F("away");
+    case CLIMATE_PRESET_BOOST:
+      return ESPHOME_F("boost");
+    case CLIMATE_PRESET_COMFORT:
+      return ESPHOME_F("comfort");
+    case CLIMATE_PRESET_SLEEP:
+      return ESPHOME_F("sleep");
+    case CLIMATE_PRESET_ACTIVITY:
+      return ESPHOME_F("activity");
+    default:
+      return ESPHOME_F("unknown");
+  }
 }
 
 void MQTTClimateComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {

esphome/components/mqtt/mqtt_component.cpp

@@ -14,9 +14,6 @@ namespace esphome::mqtt {
 
 static const char *const TAG = "mqtt.component";
 
-// Entity category MQTT strings indexed by EntityCategory enum: NONE(0) is skipped, CONFIG(1), DIAGNOSTIC(2)
-PROGMEM_STRING_TABLE(EntityCategoryMqttStrings, "", "config", "diagnostic");
-
 // Helper functions for building topic strings on stack
 inline char *append_str(char *p, const char *s, size_t len) {
   memcpy(p, s, len);
@@ -216,9 +213,13 @@ bool MQTTComponent::send_discovery_() {
         // NOLINTEND(clang-analyzer-cplusplus.NewDeleteLeaks)
 
         const auto entity_category = this->get_entity()->get_entity_category();
-        if (entity_category != ENTITY_CATEGORY_NONE) {
-          root[MQTT_ENTITY_CATEGORY] = EntityCategoryMqttStrings::get_progmem_str(
-              static_cast<uint8_t>(entity_category), static_cast<uint8_t>(ENTITY_CATEGORY_CONFIG));
+        switch (entity_category) {
+          case ENTITY_CATEGORY_NONE:
+            break;
+          case ENTITY_CATEGORY_CONFIG:
+          case ENTITY_CATEGORY_DIAGNOSTIC:
+            root[MQTT_ENTITY_CATEGORY] = entity_category == ENTITY_CATEGORY_CONFIG ? "config" : "diagnostic";
+            break;
         }
 
         if (config.state_topic) {

esphome/components/mqtt/mqtt_number.cpp

@@ -1,6 +1,5 @@
 #include "mqtt_number.h"
 #include "esphome/core/log.h"
-#include "esphome/core/progmem.h"
 
 #include "mqtt_const.h"
 
@@ -13,9 +12,6 @@ static const char *const TAG = "mqtt.number";
 
 using namespace esphome::number;
 
-// Number mode MQTT strings indexed by NumberMode enum: AUTO(0) is skipped, BOX(1), SLIDER(2)
-PROGMEM_STRING_TABLE(NumberMqttModeStrings, "", "box", "slider");
-
 MQTTNumberComponent::MQTTNumberComponent(Number *number) : number_(number) {}
 
 void MQTTNumberComponent::setup() {
@@ -52,10 +48,15 @@ void MQTTNumberComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryCon
   if (!unit_of_measurement.empty()) {
     root[MQTT_UNIT_OF_MEASUREMENT] = unit_of_measurement;
   }
-  const auto mode = this->number_->traits.get_mode();
-  if (mode != NUMBER_MODE_AUTO) {
-    root[MQTT_MODE] =
-        NumberMqttModeStrings::get_progmem_str(static_cast<uint8_t>(mode), static_cast<uint8_t>(NUMBER_MODE_BOX));
+  switch (this->number_->traits.get_mode()) {
+    case NUMBER_MODE_AUTO:
+      break;
+    case NUMBER_MODE_BOX:
+      root[MQTT_MODE] = "box";
+      break;
+    case NUMBER_MODE_SLIDER:
+      root[MQTT_MODE] = "slider";
+      break;
   }
   const auto device_class = this->number_->traits.get_device_class_ref();
   if (!device_class.empty()) {

esphome/components/mqtt/mqtt_text.cpp

@@ -1,6 +1,5 @@
 #include "mqtt_text.h"
 #include "esphome/core/log.h"
-#include "esphome/core/progmem.h"
 
 #include "mqtt_const.h"
 
@@ -13,9 +12,6 @@ static const char *const TAG = "mqtt.text";
 
 using namespace esphome::text;
 
-// Text mode MQTT strings indexed by TextMode enum (0-1): TEXT, PASSWORD
-PROGMEM_STRING_TABLE(TextMqttModeStrings, "text", "password");
-
 MQTTTextComponent::MQTTTextComponent(Text *text) : text_(text) {}
 
 void MQTTTextComponent::setup() {
@@ -38,8 +34,14 @@ const EntityBase *MQTTTextComponent::get_entity() const { return this->text_; }
 
 void MQTTTextComponent::send_discovery(JsonObject root, mqtt::SendDiscoveryConfig &config) {
   // NOLINTNEXTLINE(clang-analyzer-cplusplus.NewDeleteLeaks) false positive with ArduinoJson
-  root[MQTT_MODE] = TextMqttModeStrings::get_progmem_str(static_cast<uint8_t>(this->text_->traits.get_mode()),
-                                                         static_cast<uint8_t>(TEXT_MODE_TEXT));
+  switch (this->text_->traits.get_mode()) {
+    case TEXT_MODE_TEXT:
+      root[MQTT_MODE] = "text";
+      break;
+    case TEXT_MODE_PASSWORD:
+      root[MQTT_MODE] = "password";
+      break;
+  }
 
   config.command_topic = true;
 }

esphome/components/packet_transport/packet_transport.cpp

@@ -396,9 +396,9 @@ static bool process_rolling_code(Provider &provider, PacketDecoder &decoder) {
 /**
  * Process a received packet
  */
-void PacketTransport::process_(std::span<const uint8_t> data) {
+void PacketTransport::process_(const std::vector<uint8_t> &data) {
   auto ping_key_seen = !this->ping_pong_enable_;
-  PacketDecoder decoder(data.data(), data.size());
+  PacketDecoder decoder((data.data()), data.size());
   char namebuf[256]{};
   uint8_t byte;
   FuData rdata{};

esphome/components/packet_transport/packet_transport.h

@@ -9,9 +9,8 @@
 #include "esphome/components/binary_sensor/binary_sensor.h"
 #endif
 
-#include <map>
-#include <span>
 #include <vector>
+#include <map>
 
 /**
  * Providing packet encoding functions for exchanging data with a remote host.
@@ -114,7 +113,7 @@ class PacketTransport : public PollingComponent {
   virtual bool should_send() { return true; }
 
   // to be called by child classes when a data packet is received.
-  void process_(std::span<const uint8_t> data);
+  void process_(const std::vector<uint8_t> &data);
   void send_data_(bool all);
   void flush_();
   void add_data_(uint8_t key, const char *id, float data);

esphome/components/template/alarm_control_panel/template_alarm_control_panel.cpp

@@ -5,7 +5,6 @@
 #include "esphome/core/application.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
-#include "esphome/core/progmem.h"
 
 namespace esphome::template_ {
 
@@ -29,11 +28,18 @@ void TemplateAlarmControlPanel::add_sensor(binary_sensor::BinarySensor *sensor,
   this->sensor_data_.push_back(sd);
 };
 
-// Alarm sensor type strings indexed by AlarmSensorType enum (0-3): DELAYED, INSTANT, DELAYED_FOLLOWER, INSTANT_ALWAYS
-PROGMEM_STRING_TABLE(AlarmSensorTypeStrings, "delayed", "instant", "delayed_follower", "instant_always");
-
 static const LogString *sensor_type_to_string(AlarmSensorType type) {
-  return AlarmSensorTypeStrings::get_log_str(static_cast<uint8_t>(type), 0);
+  switch (type) {
+    case ALARM_SENSOR_TYPE_INSTANT:
+      return LOG_STR("instant");
+    case ALARM_SENSOR_TYPE_DELAYED_FOLLOWER:
+      return LOG_STR("delayed_follower");
+    case ALARM_SENSOR_TYPE_INSTANT_ALWAYS:
+      return LOG_STR("instant_always");
+    case ALARM_SENSOR_TYPE_DELAYED:
+    default:
+      return LOG_STR("delayed");
+  }
 }
 #endif
 

esphome/components/template/alarm_control_panel/template_alarm_control_panel.h

@@ -26,7 +26,7 @@ enum BinarySensorFlags : uint16_t {
   BINARY_SENSOR_MODE_BYPASS_AUTO = 1 << 4,
 };
 
-enum AlarmSensorType : uint8_t {
+enum AlarmSensorType : uint16_t {
   ALARM_SENSOR_TYPE_DELAYED = 0,
   ALARM_SENSOR_TYPE_INSTANT,
   ALARM_SENSOR_TYPE_DELAYED_FOLLOWER,

esphome/components/template/water_heater/__init__.py

@@ -46,7 +46,6 @@ CONFIG_SCHEMA = (
                 RESTORE_MODES, upper=True
             ),
             cv.Optional(CONF_CURRENT_TEMPERATURE): cv.returning_lambda,
-            cv.Optional(CONF_TARGET_TEMPERATURE): cv.returning_lambda,
             cv.Optional(CONF_MODE): cv.returning_lambda,
             cv.Optional(CONF_SUPPORTED_MODES): cv.ensure_list(
                 water_heater.validate_water_heater_mode
@@ -79,14 +78,6 @@ async def to_code(config: ConfigType) -> None:
         )
         cg.add(var.set_current_temperature_lambda(template_))
 
-    if CONF_TARGET_TEMPERATURE in config:
-        template_ = await cg.process_lambda(
-            config[CONF_TARGET_TEMPERATURE],
-            [],
-            return_type=cg.optional.template(cg.float_),
-        )
-        cg.add(var.set_target_temperature_lambda(template_))
-
     if CONF_MODE in config:
         template_ = await cg.process_lambda(
             config[CONF_MODE],

esphome/components/template/water_heater/template_water_heater.cpp

@@ -16,8 +16,7 @@ void TemplateWaterHeater::setup() {
       restore->perform();
     }
   }
-  if (!this->current_temperature_f_.has_value() && !this->target_temperature_f_.has_value() &&
-      !this->mode_f_.has_value())
+  if (!this->current_temperature_f_.has_value() && !this->mode_f_.has_value())
     this->disable_loop();
 }
 
@@ -29,9 +28,6 @@ water_heater::WaterHeaterTraits TemplateWaterHeater::traits() {
   }
 
   traits.set_supports_current_temperature(true);
-  if (this->target_temperature_f_.has_value()) {
-    traits.add_feature_flags(water_heater::WATER_HEATER_SUPPORTS_TARGET_TEMPERATURE);
-  }
   return traits;
 }
 
@@ -46,14 +42,6 @@ void TemplateWaterHeater::loop() {
     }
   }
 
-  auto target_temp = this->target_temperature_f_.call();
-  if (target_temp.has_value()) {
-    if (*target_temp != this->target_temperature_) {
-      this->target_temperature_ = *target_temp;
-      changed = true;
-    }
-  }
-
   auto new_mode = this->mode_f_.call();
   if (new_mode.has_value()) {
     if (*new_mode != this->mode_) {

esphome/components/template/water_heater/template_water_heater.h

@@ -20,9 +20,6 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
   template<typename F> void set_current_temperature_lambda(F &&f) {
     this->current_temperature_f_.set(std::forward<F>(f));
   }
-  template<typename F> void set_target_temperature_lambda(F &&f) {
-    this->target_temperature_f_.set(std::forward<F>(f));
-  }
   template<typename F> void set_mode_lambda(F &&f) { this->mode_f_.set(std::forward<F>(f)); }
 
   void set_optimistic(bool optimistic) { this->optimistic_ = optimistic; }
@@ -47,7 +44,6 @@ class TemplateWaterHeater : public Component, public water_heater::WaterHeater {
   // Ordered to minimize padding on 32-bit: 4-byte members first, then smaller
   Trigger<> set_trigger_;
   TemplateLambda<float> current_temperature_f_;
-  TemplateLambda<float> target_temperature_f_;
   TemplateLambda<water_heater::WaterHeaterMode> mode_f_;
   TemplateWaterHeaterRestoreMode restore_mode_{WATER_HEATER_NO_RESTORE};
   water_heater::WaterHeaterModeMask supported_modes_;

esphome/components/uart/uart.cpp

@@ -3,12 +3,16 @@
 #include "esphome/core/defines.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/log.h"
+#include "esphome/core/progmem.h"
 #include <cinttypes>
 
 namespace esphome::uart {
 
 static const char *const TAG = "uart";
 
+// UART parity strings indexed by UARTParityOptions enum (0-2): NONE, EVEN, ODD
+PROGMEM_STRING_TABLE(UARTParityStrings, "NONE", "EVEN", "ODD", "UNKNOWN");
+
 void UARTDevice::check_uart_settings(uint32_t baud_rate, uint8_t stop_bits, UARTParityOptions parity,
                                      uint8_t data_bits) {
   if (this->parent_->get_baud_rate() != baud_rate) {
@@ -30,16 +34,7 @@ void UARTDevice::check_uart_settings(uint32_t baud_rate, uint8_t stop_bits, UART
 }
 
 const LogString *parity_to_str(UARTParityOptions parity) {
-  switch (parity) {
-    case UART_CONFIG_PARITY_NONE:
-      return LOG_STR("NONE");
-    case UART_CONFIG_PARITY_EVEN:
-      return LOG_STR("EVEN");
-    case UART_CONFIG_PARITY_ODD:
-      return LOG_STR("ODD");
-    default:
-      return LOG_STR("UNKNOWN");
-  }
+  return UARTParityStrings::get_log_str(static_cast<uint8_t>(parity), UARTParityStrings::LAST_INDEX);
 }
 
 }  // namespace esphome::uart

esphome/components/udp/__init__.py

@@ -13,7 +13,7 @@ from esphome.components.packet_transport import (
 import esphome.config_validation as cv
 from esphome.const import CONF_DATA, CONF_ID, CONF_PORT, CONF_TRIGGER_ID
 from esphome.core import ID
-from esphome.cpp_generator import MockObj
+from esphome.cpp_generator import literal
 
 CODEOWNERS = ["@clydebarrow"]
 DEPENDENCIES = ["network"]
@@ -23,12 +23,8 @@ MULTI_CONF = True
 udp_ns = cg.esphome_ns.namespace("udp")
 UDPComponent = udp_ns.class_("UDPComponent", cg.Component)
 UDPWriteAction = udp_ns.class_("UDPWriteAction", automation.Action)
-trigger_argname = "data"
-# Listener callback type (non-owning span from UDP component)
-listener_args = cg.std_span.template(cg.uint8.operator("const"))
-listener_argtype = [(listener_args, trigger_argname)]
-# Automation/trigger type (owned vector, safe for deferred actions like delay)
 trigger_args = cg.std_vector.template(cg.uint8)
+trigger_argname = "data"
 trigger_argtype = [(trigger_args, trigger_argname)]
 
 CONF_ADDRESSES = "addresses"
@@ -122,13 +118,7 @@ async def to_code(config):
             trigger_id, trigger_argtype, on_receive
         )
         trigger_lambda = await cg.process_lambda(
-            trigger.trigger(
-                cg.std_vector.template(cg.uint8)(
-                    MockObj(trigger_argname).begin(),
-                    MockObj(trigger_argname).end(),
-                )
-            ),
-            listener_argtype,
+            trigger.trigger(literal(trigger_argname)), trigger_argtype
         )
         cg.add(var.add_listener(trigger_lambda))
         cg.add(var.set_should_listen())

esphome/components/udp/packet_transport/udp_transport.cpp

@@ -12,7 +12,7 @@ bool UDPTransport::should_send() { return network::is_connected(); }
 void UDPTransport::setup() {
   PacketTransport::setup();
   if (!this->providers_.empty() || this->is_encrypted_()) {
-    this->parent_->add_listener([this](std::span<const uint8_t> data) { this->process_(data); });
+    this->parent_->add_listener([this](std::vector<uint8_t> &buf) { this->process_(buf); });
   }
 }
 

esphome/components/udp/udp_component.cpp

@@ -103,8 +103,8 @@ void UDPComponent::setup() {
 }
 
 void UDPComponent::loop() {
+  auto buf = std::vector<uint8_t>(MAX_PACKET_SIZE);
   if (this->should_listen_) {
-    std::array<uint8_t, MAX_PACKET_SIZE> buf;
     for (;;) {
 #if defined(USE_SOCKET_IMPL_BSD_SOCKETS) || defined(USE_SOCKET_IMPL_LWIP_SOCKETS)
       auto len = this->listen_socket_->read(buf.data(), buf.size());
@@ -116,9 +116,9 @@ void UDPComponent::loop() {
 #endif
       if (len <= 0)
         break;
-      size_t packet_len = static_cast<size_t>(len);
-      ESP_LOGV(TAG, "Received packet of length %zu", packet_len);
-      this->packet_listeners_.call(std::span<const uint8_t>(buf.data(), packet_len));
+      buf.resize(len);
+      ESP_LOGV(TAG, "Received packet of length %zu", len);
+      this->packet_listeners_.call(buf);
     }
   }
 }

esphome/components/udp/udp_component.h

@@ -10,9 +10,7 @@
 #ifdef USE_SOCKET_IMPL_LWIP_TCP
 #include <WiFiUdp.h>
 #endif
-#include <array>
 #include <initializer_list>
-#include <span>
 #include <vector>
 
 namespace esphome::udp {
@@ -28,7 +26,7 @@ class UDPComponent : public Component {
   void set_broadcast_port(uint16_t port) { this->broadcast_port_ = port; }
   void set_should_broadcast() { this->should_broadcast_ = true; }
   void set_should_listen() { this->should_listen_ = true; }
-  void add_listener(std::function<void(std::span<const uint8_t>)> &&listener) {
+  void add_listener(std::function<void(std::vector<uint8_t> &)> &&listener) {
     this->packet_listeners_.add(std::move(listener));
   }
   void setup() override;
@@ -43,7 +41,7 @@ class UDPComponent : public Component {
   uint16_t broadcast_port_{};
   bool should_broadcast_{};
   bool should_listen_{};
-  CallbackManager<void(std::span<const uint8_t>)> packet_listeners_{};
+  CallbackManager<void(std::vector<uint8_t> &)> packet_listeners_{};
 
 #if defined(USE_SOCKET_IMPL_BSD_SOCKETS) || defined(USE_SOCKET_IMPL_LWIP_SOCKETS)
   std::unique_ptr<socket::Socket> broadcast_socket_ = nullptr;

esphome/cpp_types.py

@@ -12,7 +12,6 @@ std_shared_ptr = std_ns.class_("shared_ptr")
 std_string = std_ns.class_("string")
 std_string_ref = std_ns.namespace("string &")
 std_vector = std_ns.class_("vector")
-std_span = std_ns.class_("span")
 uint8 = global_ns.namespace("uint8_t")
 uint16 = global_ns.namespace("uint16_t")
 uint32 = global_ns.namespace("uint32_t")

esphome/dashboard/web_server.py

@@ -317,7 +317,6 @@ class EsphomeCommandWebSocket(CheckOriginMixin, tornado.websocket.WebSocketHandl
             # Check if the proc was not forcibly closed
             _LOGGER.info("Process exited with return code %s", returncode)
             self.write_message({"event": "exit", "code": returncode})
-            self.close()
 
     def on_close(self) -> None:
         # Check if proc exists (if 'start' has been run)

platformio.ini

@@ -37,7 +37,7 @@ lib_deps_base =
     wjtje/qr-code-generator-library@1.7.0  ; qr_code
     functionpointer/arduino-MLX90393@1.0.2 ; mlx90393
     pavlodn/HaierProtocol@0.9.31           ; haier
-    esphome/dsmr_parser@1.1.0              ; dsmr
+    esphome/dsmr_parser@1.0.0              ; dsmr
     polargoose/Crypto-no-arduino@0.4.0     ; dsmr
     https://github.com/esphome/TinyGPSPlus.git#v1.1.0     ; gps
 ; This is using the repository until a new release is published to PlatformIO

requirements.txt

@@ -23,7 +23,6 @@ resvg-py==0.2.6
 freetype-py==2.5.1
 jinja2==3.1.6
 bleak==2.1.1
-requests==2.32.5
 
 # esp-idf >= 5.0 requires this
 pyparsing >= 3.0

tests/components/epaper_spi/test.esp32-s3-idf.yaml

@@ -25,22 +25,6 @@ display:
     lambda: |-
       it.circle(64, 64, 50, Color::BLACK);
 
-  - platform: epaper_spi
-    spi_id: spi_bus
-    model: waveshare-1.54in-G
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO5
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO17
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO16
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO4
-
   - platform: epaper_spi
     spi_id: spi_bus
     model: waveshare-2.13in-v3

tests/components/lvgl/test.host.yaml

@@ -20,8 +20,6 @@ lvgl:
   - id: lvgl_0
     default_font: space16
     displays: sdl0
-    top_layer:
-
   - id: lvgl_1
     displays: sdl1
     on_idle:

tests/components/template/common-base.yaml

@@ -412,7 +412,6 @@ water_heater:
     name: "Template Water Heater"
     optimistic: true
     current_temperature: !lambda "return 42.0f;"
-    target_temperature: !lambda "return 60.0f;"
     mode: !lambda "return water_heater::WATER_HEATER_MODE_ECO;"
     supported_modes:
       - "OFF"

tests/dashboard/test_web_server.py

@@ -29,7 +29,7 @@ from esphome.dashboard.entries import (
     bool_to_entry_state,
 )
 from esphome.dashboard.models import build_importable_device_dict
-from esphome.dashboard.web_server import DashboardSubscriber, EsphomeCommandWebSocket
+from esphome.dashboard.web_server import DashboardSubscriber
 from esphome.zeroconf import DiscoveredImport
 
 from .common import get_fixture_path
@@ -1654,25 +1654,3 @@ async def test_websocket_check_origin_multiple_trusted_domains(
             assert data["event"] == "initial_state"
         finally:
             ws.close()
-
-
-def test_proc_on_exit_calls_close() -> None:
-    """Test _proc_on_exit sends exit event and closes the WebSocket."""
-    handler = Mock(spec=EsphomeCommandWebSocket)
-    handler._is_closed = False
-
-    EsphomeCommandWebSocket._proc_on_exit(handler, 0)
-
-    handler.write_message.assert_called_once_with({"event": "exit", "code": 0})
-    handler.close.assert_called_once()
-
-
-def test_proc_on_exit_skips_when_already_closed() -> None:
-    """Test _proc_on_exit does nothing when WebSocket is already closed."""
-    handler = Mock(spec=EsphomeCommandWebSocket)
-    handler._is_closed = True
-
-    EsphomeCommandWebSocket._proc_on_exit(handler, 0)
-
-    handler.write_message.assert_not_called()
-    handler.close.assert_not_called()

tests/integration/fixtures/water_heater_template.yaml

@@ -10,7 +10,6 @@ water_heater:
     name: Test Boiler
     optimistic: true
     current_temperature: !lambda "return 45.0f;"
-    target_temperature: !lambda "return 60.0f;"
     # Note: No mode lambda - we want optimistic mode changes to stick
     # A mode lambda would override mode changes in loop()
     supported_modes:

tests/integration/test_udp.py

@@ -93,34 +93,23 @@ async def udp_listener(port: int = 0) -> AsyncGenerator[tuple[int, UDPReceiver]]
         sock.close()
 
 
-def _get_free_udp_port() -> int:
-    """Get a free UDP port by binding to port 0 and releasing."""
-    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-    sock.bind(("127.0.0.1", 0))
-    port = sock.getsockname()[1]
-    sock.close()
-    return port
-
-
 @pytest.mark.asyncio
 async def test_udp_send_receive(
     yaml_config: str,
     run_compiled: RunCompiledFunction,
     api_client_connected: APIClientConnectedFactory,
 ) -> None:
-    """Test UDP component can send and receive messages."""
+    """Test UDP component can send messages with multiple addresses configured."""
+    # Track log lines to verify dump_config output
     log_lines: list[str] = []
-    receive_event = asyncio.Event()
 
     def on_log_line(line: str) -> None:
         log_lines.append(line)
-        if "Received UDP:" in line:
-            receive_event.set()
 
-    async with udp_listener() as (broadcast_port, receiver):
-        listen_port = _get_free_udp_port()
-        config = yaml_config.replace("UDP_LISTEN_PORT_PLACEHOLDER", str(listen_port))
-        config = config.replace("UDP_BROADCAST_PORT_PLACEHOLDER", str(broadcast_port))
+    async with udp_listener() as (udp_port, receiver):
+        # Replace placeholders in the config
+        config = yaml_config.replace("UDP_LISTEN_PORT_PLACEHOLDER", str(udp_port + 1))
+        config = config.replace("UDP_BROADCAST_PORT_PLACEHOLDER", str(udp_port))
 
         async with (
             run_compiled(config, line_callback=on_log_line),
@@ -180,19 +169,3 @@ async def test_udp_send_receive(
             assert "Address: 127.0.0.2" in log_text, (
                 f"Address 127.0.0.2 not found in dump_config. Log: {log_text[-2000:]}"
             )
-
-            # Test receiving a UDP packet (exercises on_receive with std::span)
-            test_payload = b"TEST_RECEIVE_UDP"
-            send_sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-            try:
-                send_sock.sendto(test_payload, ("127.0.0.1", listen_port))
-            finally:
-                send_sock.close()
-
-            try:
-                await asyncio.wait_for(receive_event.wait(), timeout=5.0)
-            except TimeoutError:
-                pytest.fail(
-                    f"on_receive did not fire. Expected 'Received UDP:' in logs. "
-                    f"Last log lines: {log_lines[-20:]}"
-                )

tests/integration/test_water_heater_template.py

@@ -85,9 +85,6 @@ async def test_water_heater_template(
         assert initial_state.current_temperature == 45.0, (
             f"Expected current temp 45.0, got {initial_state.current_temperature}"
         )
-        assert initial_state.target_temperature == 60.0, (
-            f"Expected target temp 60.0, got {initial_state.target_temperature}"
-        )
 
         # Test changing to GAS mode
         client.water_heater_command(test_water_heater.key, mode=WaterHeaterMode.GAS)