Merge pull request #6863 from esphome/bump-2024.5.5

2024.5.5

esphome/__main__.py

@@ -346,7 +346,7 @@ def upload_program(config, args, host):
         not is_ip_address(CORE.address)  # pylint: disable=too-many-boolean-expressions
         and (get_port_type(host) == "MQTT" or config[CONF_MDNS][CONF_DISABLED])
         and CONF_MQTT in config
-        and (not args.device or args.device == "MQTT")
+        and (not args.device or args.device in ("MQTT", "OTA"))
     ):
         from esphome import mqtt
 

esphome/components/adc/__init__.py

@@ -18,11 +18,23 @@ from esphome.components.esp32.const import (
 
 CODEOWNERS = ["@esphome/core"]
 
+adc_ns = cg.esphome_ns.namespace("adc")
+
+
+"""
+From the below patch versions (and 5.2+) ADC_ATTEN_DB_11 is deprecated and replaced with ADC_ATTEN_DB_12.
+4.4.7
+5.0.5
+5.1.3
+5.2+
+"""
+
 ATTENUATION_MODES = {
     "0db": cg.global_ns.ADC_ATTEN_DB_0,
     "2.5db": cg.global_ns.ADC_ATTEN_DB_2_5,
     "6db": cg.global_ns.ADC_ATTEN_DB_6,
-    "11db": cg.global_ns.ADC_ATTEN_DB_11,
+    "11db": adc_ns.ADC_ATTEN_DB_12_COMPAT,
+    "12db": adc_ns.ADC_ATTEN_DB_12_COMPAT,
     "auto": "auto",
 }
 

esphome/components/adc/adc_sensor.cpp

@@ -62,7 +62,7 @@ extern "C"
   }
 
   // load characteristics for each attenuation
-  for (int32_t i = 0; i <= ADC_ATTEN_DB_11; i++) {
+  for (int32_t i = 0; i <= ADC_ATTEN_DB_12_COMPAT; i++) {
     auto adc_unit = channel1_ != ADC1_CHANNEL_MAX ? ADC_UNIT_1 : ADC_UNIT_2;
     auto cal_value = esp_adc_cal_characterize(adc_unit, (adc_atten_t) i, ADC_WIDTH_MAX_SOC_BITS,
                                               1100,  // default vref
@@ -118,8 +118,8 @@ void ADCSensor::dump_config() {
       case ADC_ATTEN_DB_6:
         ESP_LOGCONFIG(TAG, " Attenuation: 6db");
         break;
-      case ADC_ATTEN_DB_11:
-        ESP_LOGCONFIG(TAG, " Attenuation: 11db");
+      case ADC_ATTEN_DB_12_COMPAT:
+        ESP_LOGCONFIG(TAG, " Attenuation: 12db");
         break;
       default:  // This is to satisfy the unused ADC_ATTEN_MAX
         break;
@@ -183,12 +183,12 @@ float ADCSensor::sample() {
     return mv / 1000.0f;
   }
 
-  int raw11 = ADC_MAX, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
+  int raw12 = ADC_MAX, raw6 = ADC_MAX, raw2 = ADC_MAX, raw0 = ADC_MAX;
 
   if (channel1_ != ADC1_CHANNEL_MAX) {
-    adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_11);
-    raw11 = adc1_get_raw(channel1_);
-    if (raw11 < ADC_MAX) {
+    adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_12_COMPAT);
+    raw12 = adc1_get_raw(channel1_);
+    if (raw12 < ADC_MAX) {
       adc1_config_channel_atten(channel1_, ADC_ATTEN_DB_6);
       raw6 = adc1_get_raw(channel1_);
       if (raw6 < ADC_MAX) {
@@ -201,9 +201,9 @@ float ADCSensor::sample() {
       }
     }
   } else if (channel2_ != ADC2_CHANNEL_MAX) {
-    adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_11);
-    adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw11);
-    if (raw11 < ADC_MAX) {
+    adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_12_COMPAT);
+    adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw12);
+    if (raw12 < ADC_MAX) {
       adc2_config_channel_atten(channel2_, ADC_ATTEN_DB_6);
       adc2_get_raw(channel2_, ADC_WIDTH_MAX_SOC_BITS, &raw6);
       if (raw6 < ADC_MAX) {
@@ -217,25 +217,25 @@ float ADCSensor::sample() {
     }
   }
 
-  if (raw0 == -1 || raw2 == -1 || raw6 == -1 || raw11 == -1) {
+  if (raw0 == -1 || raw2 == -1 || raw6 == -1 || raw12 == -1) {
     return NAN;
   }
 
-  uint32_t mv11 = esp_adc_cal_raw_to_voltage(raw11, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_11]);
+  uint32_t mv12 = esp_adc_cal_raw_to_voltage(raw12, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_12_COMPAT]);
   uint32_t mv6 = esp_adc_cal_raw_to_voltage(raw6, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_6]);
   uint32_t mv2 = esp_adc_cal_raw_to_voltage(raw2, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_2_5]);
   uint32_t mv0 = esp_adc_cal_raw_to_voltage(raw0, &cal_characteristics_[(int32_t) ADC_ATTEN_DB_0]);
 
   // Contribution of each value, in range 0-2048 (12 bit ADC) or 0-4096 (13 bit ADC)
-  uint32_t c11 = std::min(raw11, ADC_HALF);
+  uint32_t c12 = std::min(raw12, ADC_HALF);
   uint32_t c6 = ADC_HALF - std::abs(raw6 - ADC_HALF);
   uint32_t c2 = ADC_HALF - std::abs(raw2 - ADC_HALF);
   uint32_t c0 = std::min(ADC_MAX - raw0, ADC_HALF);
   // max theoretical csum value is 4096*4 = 16384
-  uint32_t csum = c11 + c6 + c2 + c0;
+  uint32_t csum = c12 + c6 + c2 + c0;
 
   // each mv is max 3900; so max value is 3900*4096*4, fits in unsigned32
-  uint32_t mv_scaled = (mv11 * c11) + (mv6 * c6) + (mv2 * c2) + (mv0 * c0);
+  uint32_t mv_scaled = (mv12 * c12) + (mv6 * c6) + (mv2 * c2) + (mv0 * c0);
   return mv_scaled / (float) (csum * 1000U);
 }
 #endif  // USE_ESP32

esphome/components/adc/adc_sensor.h

@@ -1,19 +1,34 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/defines.h"
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/core/component.h"
+#include "esphome/core/defines.h"
+#include "esphome/core/hal.h"
 
 #ifdef USE_ESP32
-#include "driver/adc.h"
 #include <esp_adc_cal.h>
+#include "driver/adc.h"
 #endif
 
 namespace esphome {
 namespace adc {
 
+#ifdef USE_ESP32
+// clang-format off
+#if (ESP_IDF_VERSION_MAJOR == 4 && ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 7)) || \
+    (ESP_IDF_VERSION_MAJOR == 5 && \
+     ((ESP_IDF_VERSION_MINOR == 0 && ESP_IDF_VERSION_PATCH >= 5) || \
+      (ESP_IDF_VERSION_MINOR == 1 && ESP_IDF_VERSION_PATCH >= 3) || \
+      (ESP_IDF_VERSION_MINOR >= 2)) \
+    )
+// clang-format on
+static const adc_atten_t ADC_ATTEN_DB_12_COMPAT = ADC_ATTEN_DB_12;
+#else
+static const adc_atten_t ADC_ATTEN_DB_12_COMPAT = ADC_ATTEN_DB_11;
+#endif
+#endif  // USE_ESP32
+
 class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
  public:
 #ifdef USE_ESP32

esphome/components/adc/sensor.py

@@ -1,3 +1,5 @@
+import logging
+
 import esphome.codegen as cg
 import esphome.config_validation as cv
 import esphome.final_validate as fv
@@ -19,16 +21,29 @@ from . import (
     ATTENUATION_MODES,
     ESP32_VARIANT_ADC1_PIN_TO_CHANNEL,
     ESP32_VARIANT_ADC2_PIN_TO_CHANNEL,
+    adc_ns,
     validate_adc_pin,
 )
 
+_LOGGER = logging.getLogger(__name__)
+
 AUTO_LOAD = ["voltage_sampler"]
 
 
+_attenuation = cv.enum(ATTENUATION_MODES, lower=True)
+
+
 def validate_config(config):
     if config[CONF_RAW] and config.get(CONF_ATTENUATION, None) == "auto":
         raise cv.Invalid("Automatic attenuation cannot be used when raw output is set")
 
+    if config.get(CONF_ATTENUATION) == "11db":
+        _LOGGER.warning(
+            "`attenuation: 11db` is deprecated, use `attenuation: 12db` instead"
+        )
+        # Alter value here so `config` command prints the recommended change
+        config[CONF_ATTENUATION] = _attenuation("12db")
+
     return config
 
 
@@ -47,7 +62,6 @@ def final_validate_config(config):
     return config
 
 
-adc_ns = cg.esphome_ns.namespace("adc")
 ADCSensor = adc_ns.class_(
     "ADCSensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
@@ -65,7 +79,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_PIN): validate_adc_pin,
             cv.Optional(CONF_RAW, default=False): cv.boolean,
             cv.SplitDefault(CONF_ATTENUATION, esp32="0db"): cv.All(
-                cv.only_on_esp32, cv.enum(ATTENUATION_MODES, lower=True)
+                cv.only_on_esp32, _attenuation
             ),
         }
     )

esphome/components/i2s_audio/speaker/i2s_audio_speaker.cpp

@@ -19,10 +19,27 @@ void I2SAudioSpeaker::setup() {
   ESP_LOGCONFIG(TAG, "Setting up I2S Audio Speaker...");
 
   this->buffer_queue_ = xQueueCreate(BUFFER_COUNT, sizeof(DataEvent));
+  if (this->buffer_queue_ == nullptr) {
+    ESP_LOGE(TAG, "Failed to create buffer queue");
+    this->mark_failed();
+    return;
+  }
+
   this->event_queue_ = xQueueCreate(BUFFER_COUNT, sizeof(TaskEvent));
+  if (this->event_queue_ == nullptr) {
+    ESP_LOGE(TAG, "Failed to create event queue");
+    this->mark_failed();
+    return;
+  }
 }
 
-void I2SAudioSpeaker::start() { this->state_ = speaker::STATE_STARTING; }
+void I2SAudioSpeaker::start() {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Cannot start audio, speaker failed to setup");
+    return;
+  }
+  this->state_ = speaker::STATE_STARTING;
+}
 void I2SAudioSpeaker::start_() {
   if (!this->parent_->try_lock()) {
     return;  // Waiting for another i2s component to return lock
@@ -141,6 +158,8 @@ void I2SAudioSpeaker::player_task(void *params) {
 }
 
 void I2SAudioSpeaker::stop() {
+  if (this->is_failed())
+    return;
   if (this->state_ == speaker::STATE_STOPPED)
     return;
   if (this->state_ == speaker::STATE_STARTING) {
@@ -200,6 +219,10 @@ void I2SAudioSpeaker::loop() {
 }
 
 size_t I2SAudioSpeaker::play(const uint8_t *data, size_t length) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Cannot play audio, speaker failed to setup");
+    return 0;
+  }
   if (this->state_ != speaker::STATE_RUNNING && this->state_ != speaker::STATE_STARTING) {
     this->start();
   }

esphome/components/improv_serial/improv_serial_component.cpp

@@ -109,6 +109,7 @@ void ImprovSerialComponent::write_data_(std::vector<uint8_t> &data) {
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32S3)
     case logger::UART_SELECTION_USB_SERIAL_JTAG:
       usb_serial_jtag_write_bytes((char *) data.data(), data.size(), 20 / portTICK_PERIOD_MS);
+      usb_serial_jtag_ll_txfifo_flush();  // fixes for issue in IDF 4.4.7
       break;
 #endif  // USE_ESP32_VARIANT_ESP32C3 || USE_ESP32_VARIANT_ESP32S3
     default:

esphome/components/improv_serial/improv_serial_component.h

@@ -17,6 +17,7 @@
 #if defined(USE_ESP32_VARIANT_ESP32C3) || defined(USE_ESP32_VARIANT_ESP32C6) || defined(USE_ESP32_VARIANT_ESP32S3) || \
     defined(USE_ESP32_VARIANT_ESP32H2)
 #include <driver/usb_serial_jtag.h>
+#include <hal/usb_serial_jtag_ll.h>
 #endif
 #if defined(USE_ESP32_VARIANT_ESP32S2) || defined(USE_ESP32_VARIANT_ESP32S3)
 #include <esp_private/usb_console.h>

esphome/components/remote_receiver/__init__.py

@@ -63,7 +63,13 @@ def validate_tolerance(value):
     if "%" in str(value):
         type_ = TYPE_PERCENTAGE
     else:
-        type_ = TYPE_TIME
+        try:
+            cv.positive_time_period_microseconds(value)
+            type_ = TYPE_TIME
+        except cv.Invalid as exc:
+            raise cv.Invalid(
+                "Tolerance must be a percentage or time. Configurations made before 2024.5.0 treated the value as a percentage."
+            ) from exc
 
     return TOLERANCE_SCHEMA(
         {

esphome/components/valve/__init__.py

@@ -14,6 +14,9 @@ from esphome.const import (
     CONF_STATE,
     CONF_STOP,
     CONF_TRIGGER_ID,
+    DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_GAS,
+    DEVICE_CLASS_WATER,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -22,6 +25,12 @@ IS_PLATFORM_COMPONENT = True
 
 CODEOWNERS = ["@esphome/core"]
 
+DEVICE_CLASSES = [
+    DEVICE_CLASS_EMPTY,
+    DEVICE_CLASS_GAS,
+    DEVICE_CLASS_WATER,
+]
+
 valve_ns = cg.esphome_ns.namespace("valve")
 
 Valve = valve_ns.class_("Valve", cg.EntityBase)
@@ -65,6 +74,7 @@ VALVE_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMMAND_COMPONENT_SCHEMA).ex
     {
         cv.GenerateID(): cv.declare_id(Valve),
         cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTValveComponent),
+        cv.Optional(CONF_DEVICE_CLASS): cv.one_of(*DEVICE_CLASSES, lower=True),
         cv.Optional(CONF_POSITION_COMMAND_TOPIC): cv.All(
             cv.requires_component("mqtt"), cv.subscribe_topic
         ),

esphome/components/voice_assistant/voice_assistant.cpp

@@ -17,7 +17,7 @@ static const char *const TAG = "voice_assistant";
 
 static const size_t SAMPLE_RATE_HZ = 16000;
 static const size_t INPUT_BUFFER_SIZE = 32 * SAMPLE_RATE_HZ / 1000;  // 32ms * 16kHz / 1000ms
-static const size_t BUFFER_SIZE = 1024 * SAMPLE_RATE_HZ / 1000;
+static const size_t BUFFER_SIZE = 512 * SAMPLE_RATE_HZ / 1000;
 static const size_t SEND_BUFFER_SIZE = INPUT_BUFFER_SIZE * sizeof(int16_t);
 static const size_t RECEIVE_SIZE = 1024;
 static const size_t SPEAKER_BUFFER_SIZE = 16 * RECEIVE_SIZE;
@@ -71,6 +71,12 @@ void VoiceAssistant::setup() {
   ESP_LOGCONFIG(TAG, "Setting up Voice Assistant...");
 
   global_voice_assistant = this;
+}
+
+bool VoiceAssistant::allocate_buffers_() {
+  if (this->send_buffer_ != nullptr) {
+    return true;  // Already allocated
+  }
 
 #ifdef USE_SPEAKER
   if (this->speaker_ != nullptr) {
@@ -78,8 +84,7 @@ void VoiceAssistant::setup() {
     this->speaker_buffer_ = speaker_allocator.allocate(SPEAKER_BUFFER_SIZE);
     if (this->speaker_buffer_ == nullptr) {
       ESP_LOGW(TAG, "Could not allocate speaker buffer");
-      this->mark_failed();
-      return;
+      return false;
     }
   }
 #endif
@@ -88,8 +93,7 @@ void VoiceAssistant::setup() {
   this->input_buffer_ = allocator.allocate(INPUT_BUFFER_SIZE);
   if (this->input_buffer_ == nullptr) {
     ESP_LOGW(TAG, "Could not allocate input buffer");
-    this->mark_failed();
-    return;
+    return false;
   }
 
 #ifdef USE_ESP_ADF
@@ -99,17 +103,71 @@ void VoiceAssistant::setup() {
   this->ring_buffer_ = RingBuffer::create(BUFFER_SIZE * sizeof(int16_t));
   if (this->ring_buffer_ == nullptr) {
     ESP_LOGW(TAG, "Could not allocate ring buffer");
-    this->mark_failed();
-    return;
+    return false;
   }
 
   ExternalRAMAllocator<uint8_t> send_allocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
   this->send_buffer_ = send_allocator.allocate(SEND_BUFFER_SIZE);
   if (send_buffer_ == nullptr) {
     ESP_LOGW(TAG, "Could not allocate send buffer");
-    this->mark_failed();
-    return;
+    return false;
   }
+
+  return true;
+}
+
+void VoiceAssistant::clear_buffers_() {
+  if (this->send_buffer_ != nullptr) {
+    memset(this->send_buffer_, 0, SEND_BUFFER_SIZE);
+  }
+
+  if (this->input_buffer_ != nullptr) {
+    memset(this->input_buffer_, 0, INPUT_BUFFER_SIZE * sizeof(int16_t));
+  }
+
+  if (this->ring_buffer_ != nullptr) {
+    this->ring_buffer_->reset();
+  }
+
+#ifdef USE_SPEAKER
+  if (this->speaker_buffer_ != nullptr) {
+    memset(this->speaker_buffer_, 0, SPEAKER_BUFFER_SIZE);
+
+    this->speaker_buffer_size_ = 0;
+    this->speaker_buffer_index_ = 0;
+    this->speaker_bytes_received_ = 0;
+  }
+#endif
+}
+
+void VoiceAssistant::deallocate_buffers_() {
+  ExternalRAMAllocator<uint8_t> send_deallocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
+  send_deallocator.deallocate(this->send_buffer_, SEND_BUFFER_SIZE);
+  this->send_buffer_ = nullptr;
+
+  if (this->ring_buffer_ != nullptr) {
+    this->ring_buffer_.reset();
+    this->ring_buffer_ = nullptr;
+  }
+
+#ifdef USE_ESP_ADF
+  if (this->vad_instance_ != nullptr) {
+    vad_destroy(this->vad_instance_);
+    this->vad_instance_ = nullptr;
+  }
+#endif
+
+  ExternalRAMAllocator<int16_t> input_deallocator(ExternalRAMAllocator<int16_t>::ALLOW_FAILURE);
+  input_deallocator.deallocate(this->input_buffer_, INPUT_BUFFER_SIZE);
+  this->input_buffer_ = nullptr;
+
+#ifdef USE_SPEAKER
+  if (this->speaker_buffer_ != nullptr) {
+    ExternalRAMAllocator<uint8_t> speaker_deallocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
+    speaker_deallocator.deallocate(this->speaker_buffer_, SPEAKER_BUFFER_SIZE);
+    this->speaker_buffer_ = nullptr;
+  }
+#endif
 }
 
 int VoiceAssistant::read_microphone_() {
@@ -138,14 +196,13 @@ void VoiceAssistant::loop() {
     }
     this->continuous_ = false;
     this->signal_stop_();
+    this->clear_buffers_();
     return;
   }
   switch (this->state_) {
     case State::IDLE: {
       if (this->continuous_ && this->desired_state_ == State::IDLE) {
         this->idle_trigger_->trigger();
-
-        this->ring_buffer_->reset();
 #ifdef USE_ESP_ADF
         if (this->use_wake_word_) {
           this->set_state_(State::START_MICROPHONE, State::WAIT_FOR_VAD);
@@ -161,8 +218,15 @@ void VoiceAssistant::loop() {
     }
     case State::START_MICROPHONE: {
       ESP_LOGD(TAG, "Starting Microphone");
-      memset(this->send_buffer_, 0, SEND_BUFFER_SIZE);
-      memset(this->input_buffer_, 0, INPUT_BUFFER_SIZE * sizeof(int16_t));
+      if (!this->allocate_buffers_()) {
+        this->status_set_error("Failed to allocate buffers");
+        return;
+      }
+      if (this->status_has_error()) {
+        this->status_clear_error();
+      }
+      this->clear_buffers_();
+
       this->mic_->start();
       this->high_freq_.start();
       this->set_state_(State::STARTING_MICROPHONE);
@@ -343,10 +407,9 @@ void VoiceAssistant::loop() {
         this->speaker_->stop();
         this->cancel_timeout("speaker-timeout");
         this->cancel_timeout("playing");
-        this->speaker_buffer_size_ = 0;
-        this->speaker_buffer_index_ = 0;
-        this->speaker_bytes_received_ = 0;
-        memset(this->speaker_buffer_, 0, SPEAKER_BUFFER_SIZE);
+
+        this->clear_buffers_();
+
         this->wait_for_stream_end_ = false;
         this->stream_ended_ = false;
 
@@ -507,7 +570,6 @@ void VoiceAssistant::request_start(bool continuous, bool silence_detection) {
   if (this->state_ == State::IDLE) {
     this->continuous_ = continuous;
     this->silence_detection_ = silence_detection;
-    this->ring_buffer_->reset();
 #ifdef USE_ESP_ADF
     if (this->use_wake_word_) {
       this->set_state_(State::START_MICROPHONE, State::WAIT_FOR_VAD);

esphome/components/voice_assistant/voice_assistant.h

@@ -151,6 +151,10 @@ class VoiceAssistant : public Component {
   void set_wake_word(const std::string &wake_word) { this->wake_word_ = wake_word; }
 
  protected:
+  bool allocate_buffers_();
+  void clear_buffers_();
+  void deallocate_buffers_();
+
   int read_microphone_();
   void set_state_(State state);
   void set_state_(State state, State desired_state);

esphome/components/web_server_base/__init__.py

@@ -37,4 +37,4 @@ async def to_code(config):
             cg.add_library("FS", None)
             cg.add_library("Update", None)
         # https://github.com/esphome/ESPAsyncWebServer/blob/master/library.json
-        cg.add_library("esphome/ESPAsyncWebServer-esphome", "3.2.0")
+        cg.add_library("esphome/ESPAsyncWebServer-esphome", "3.2.2")

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.5.0b5"
+__version__ = "2024.5.5"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/core/helpers.cpp

@@ -433,6 +433,10 @@ int8_t step_to_accuracy_decimals(float step) {
   return str.length() - dot_pos - 1;
 }
 
+static const std::string BASE64_CHARS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+                                        "abcdefghijklmnopqrstuvwxyz"
+                                        "0123456789+/";
+
 static inline bool is_base64(char c) { return (isalnum(c) || (c == '+') || (c == '/')); }
 
 std::string base64_encode(const std::vector<uint8_t> &buf) { return base64_encode(buf.data(), buf.size()); }

esphome/core/helpers.h

@@ -435,10 +435,6 @@ std::string value_accuracy_to_string(float value, int8_t accuracy_decimals);
 /// Derive accuracy in decimals from an increment step.
 int8_t step_to_accuracy_decimals(float step);
 
-static const std::string BASE64_CHARS = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-                                        "abcdefghijklmnopqrstuvwxyz"
-                                        "0123456789+/";
-
 std::string base64_encode(const uint8_t *buf, size_t buf_len);
 std::string base64_encode(const std::vector<uint8_t> &buf);
 

esphome/dashboard/entries.py

@@ -103,7 +103,7 @@ class DashboardEntries:
 
     def all(self) -> list[DashboardEntry]:
         """Return all entries."""
-        return asyncio.run_coroutine_threadsafe(self._async_all, self._loop).result()
+        return asyncio.run_coroutine_threadsafe(self._async_all(), self._loop).result()
 
     def async_all(self) -> list[DashboardEntry]:
         """Return all entries."""

platformio.ini

@@ -58,7 +58,7 @@ lib_deps =
     SPI                                                   ; spi (Arduino built-in)
     Wire                                                  ; i2c (Arduino built-int)
     heman/AsyncMqttClient-esphome@1.0.0                   ; mqtt
-    esphome/ESPAsyncWebServer-esphome@3.2.0               ; web_server_base
+    esphome/ESPAsyncWebServer-esphome@3.2.2               ; web_server_base
     fastled/FastLED@3.3.2                                 ; fastled_base
     mikalhart/TinyGPSPlus@1.0.2                           ; gps
     freekode/TM1651@1.0.1                                 ; tm1651

tests/components/remote_receiver/esp32-common.yaml

@@ -3,6 +3,7 @@ remote_receiver:
   pin: ${pin}
   rmt_channel: ${rmt_channel}
   dump: all
+  tolerance: 25%
   on_abbwelcome:
     then:
       - logger.log: