Merge pull request #6607 from esphome/bump-2024.4.1

2024.4.1

esphome/components/ads1115/__init__.py

@@ -4,13 +4,14 @@ from esphome.components import i2c
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["i2c"]
-AUTO_LOAD = ["sensor", "voltage_sampler"]
 MULTI_CONF = True
 
 ads1115_ns = cg.esphome_ns.namespace("ads1115")
 ADS1115Component = ads1115_ns.class_("ADS1115Component", cg.Component, i2c.I2CDevice)
 
 CONF_CONTINUOUS_MODE = "continuous_mode"
+CONF_ADS1115_ID = "ads1115_id"
+
 CONFIG_SCHEMA = (
     cv.Schema(
         {

esphome/components/ads1115/ads1115.cpp

@@ -1,6 +1,6 @@
 #include "ads1115.h"
-#include "esphome/core/log.h"
 #include "esphome/core/hal.h"
+#include "esphome/core/log.h"
 
 namespace esphome {
 namespace ads1115 {
@@ -75,25 +75,19 @@ void ADS1115Component::dump_config() {
   if (this->is_failed()) {
     ESP_LOGE(TAG, "Communication with ADS1115 failed!");
   }
-
-  for (auto *sensor : this->sensors_) {
-    LOG_SENSOR("  ", "Sensor", sensor);
-    ESP_LOGCONFIG(TAG, "    Multiplexer: %u", sensor->get_multiplexer());
-    ESP_LOGCONFIG(TAG, "    Gain: %u", sensor->get_gain());
-    ESP_LOGCONFIG(TAG, "    Resolution: %u", sensor->get_resolution());
-  }
 }
-float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
+float ADS1115Component::request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain,
+                                            ADS1115Resolution resolution) {
   uint16_t config = this->prev_config_;
   // Multiplexer
   //        0bxBBBxxxxxxxxxxxx
   config &= 0b1000111111111111;
-  config |= (sensor->get_multiplexer() & 0b111) << 12;
+  config |= (multiplexer & 0b111) << 12;
 
   // Gain
   //        0bxxxxBBBxxxxxxxxx
   config &= 0b1111000111111111;
-  config |= (sensor->get_gain() & 0b111) << 9;
+  config |= (gain & 0b111) << 9;
 
   if (!this->continuous_mode_) {
     // Start conversion
@@ -132,7 +126,7 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
     return NAN;
   }
 
-  if (sensor->get_resolution() == ADS1015_12_BITS) {
+  if (resolution == ADS1015_12_BITS) {
     bool negative = (raw_conversion >> 15) == 1;
 
     // shift raw_conversion as it's only 12-bits, left justified
@@ -151,8 +145,8 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   auto signed_conversion = static_cast<int16_t>(raw_conversion);
 
   float millivolts;
-  float divider = (sensor->get_resolution() == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
-  switch (sensor->get_gain()) {
+  float divider = (resolution == ADS1115_16_BITS) ? 32768.0f : 2048.0f;
+  switch (gain) {
     case ADS1115_GAIN_6P144:
       millivolts = (signed_conversion * 6144) / divider;
       break;
@@ -179,14 +173,5 @@ float ADS1115Component::request_measurement(ADS1115Sensor *sensor) {
   return millivolts / 1e3f;
 }
 
-float ADS1115Sensor::sample() { return this->parent_->request_measurement(this); }
-void ADS1115Sensor::update() {
-  float v = this->parent_->request_measurement(this);
-  if (!std::isnan(v)) {
-    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
-    this->publish_state(v);
-  }
-}
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/ads1115.h

@@ -1,9 +1,7 @@
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
-#include "esphome/components/voltage_sampler/voltage_sampler.h"
+#include "esphome/core/component.h"
 
 #include <vector>
 
@@ -35,12 +33,8 @@ enum ADS1115Resolution {
   ADS1015_12_BITS = 12,
 };
 
-class ADS1115Sensor;
-
 class ADS1115Component : public Component, public i2c::I2CDevice {
  public:
-  void register_sensor(ADS1115Sensor *obj) { this->sensors_.push_back(obj); }
-  /// Set up the internal sensor array.
   void setup() override;
   void dump_config() override;
   /// HARDWARE_LATE setup priority
@@ -48,33 +42,12 @@ class ADS1115Component : public Component, public i2c::I2CDevice {
   void set_continuous_mode(bool continuous_mode) { continuous_mode_ = continuous_mode; }
 
   /// Helper method to request a measurement from a sensor.
-  float request_measurement(ADS1115Sensor *sensor);
+  float request_measurement(ADS1115Multiplexer multiplexer, ADS1115Gain gain, ADS1115Resolution resolution);
 
  protected:
-  std::vector<ADS1115Sensor *> sensors_;
   uint16_t prev_config_{0};
   bool continuous_mode_;
 };
 
-/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
-class ADS1115Sensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
- public:
-  ADS1115Sensor(ADS1115Component *parent) : parent_(parent) {}
-  void update() override;
-  void set_multiplexer(ADS1115Multiplexer multiplexer) { multiplexer_ = multiplexer; }
-  void set_gain(ADS1115Gain gain) { gain_ = gain; }
-  void set_resolution(ADS1115Resolution resolution) { resolution_ = resolution; }
-  float sample() override;
-  uint8_t get_multiplexer() const { return multiplexer_; }
-  uint8_t get_gain() const { return gain_; }
-  uint8_t get_resolution() const { return resolution_; }
-
- protected:
-  ADS1115Component *parent_;
-  ADS1115Multiplexer multiplexer_;
-  ADS1115Gain gain_;
-  ADS1115Resolution resolution_;
-};
-
 }  // namespace ads1115
 }  // namespace esphome

esphome/components/ads1115/sensor/__init__.py

@@ -10,8 +10,9 @@ from esphome.const import (
     UNIT_VOLT,
     CONF_ID,
 )
-from . import ads1115_ns, ADS1115Component
+from .. import ads1115_ns, ADS1115Component, CONF_ADS1115_ID
 
+AUTO_LOAD = ["voltage_sampler"]
 DEPENDENCIES = ["ads1115"]
 
 ADS1115Multiplexer = ads1115_ns.enum("ADS1115Multiplexer")
@@ -43,20 +44,10 @@ RESOLUTION = {
 }
 
 
-def validate_gain(value):
-    if isinstance(value, float):
-        value = f"{value:0.03f}"
-    elif not isinstance(value, str):
-        raise cv.Invalid(f'invalid gain "{value}"')
-
-    return cv.enum(GAIN)(value)
-
-
 ADS1115Sensor = ads1115_ns.class_(
     "ADS1115Sensor", sensor.Sensor, cg.PollingComponent, voltage_sampler.VoltageSampler
 )
 
-CONF_ADS1115_ID = "ads1115_id"
 CONFIG_SCHEMA = (
     sensor.sensor_schema(
         ADS1115Sensor,
@@ -69,7 +60,7 @@ CONFIG_SCHEMA = (
         {
             cv.GenerateID(CONF_ADS1115_ID): cv.use_id(ADS1115Component),
             cv.Required(CONF_MULTIPLEXER): cv.enum(MUX, upper=True, space="_"),
-            cv.Required(CONF_GAIN): validate_gain,
+            cv.Required(CONF_GAIN): cv.enum(GAIN, string=True),
             cv.Optional(CONF_RESOLUTION, default="16_BITS"): cv.enum(
                 RESOLUTION, upper=True, space="_"
             ),
@@ -80,13 +71,11 @@ CONFIG_SCHEMA = (
 
 
 async def to_code(config):
-    paren = await cg.get_variable(config[CONF_ADS1115_ID])
-    var = cg.new_Pvariable(config[CONF_ID], paren)
+    var = cg.new_Pvariable(config[CONF_ID])
     await sensor.register_sensor(var, config)
     await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ADS1115_ID])
 
     cg.add(var.set_multiplexer(config[CONF_MULTIPLEXER]))
     cg.add(var.set_gain(config[CONF_GAIN]))
     cg.add(var.set_resolution(config[CONF_RESOLUTION]))
-
-    cg.add(paren.register_sensor(var))

esphome/components/ads1115/sensor/ads1115_sensor.cpp

@@ -0,0 +1,30 @@
+#include "ads1115_sensor.h"
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace ads1115 {
+
+static const char *const TAG = "ads1115.sensor";
+
+float ADS1115Sensor::sample() {
+  return this->parent_->request_measurement(this->multiplexer_, this->gain_, this->resolution_);
+}
+
+void ADS1115Sensor::update() {
+  float v = this->sample();
+  if (!std::isnan(v)) {
+    ESP_LOGD(TAG, "'%s': Got Voltage=%fV", this->get_name().c_str(), v);
+    this->publish_state(v);
+  }
+}
+
+void ADS1115Sensor::dump_config() {
+  LOG_SENSOR("  ", "ADS1115 Sensor", this);
+  ESP_LOGCONFIG(TAG, "    Multiplexer: %u", this->multiplexer_);
+  ESP_LOGCONFIG(TAG, "    Gain: %u", this->gain_);
+  ESP_LOGCONFIG(TAG, "    Resolution: %u", this->resolution_);
+}
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/ads1115/sensor/ads1115_sensor.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/components/voltage_sampler/voltage_sampler.h"
+
+#include "../ads1115.h"
+
+namespace esphome {
+namespace ads1115 {
+
+/// Internal holder class that is in instance of Sensor so that the hub can create individual sensors.
+class ADS1115Sensor : public sensor::Sensor,
+                      public PollingComponent,
+                      public voltage_sampler::VoltageSampler,
+                      public Parented<ADS1115Component> {
+ public:
+  void update() override;
+  void set_multiplexer(ADS1115Multiplexer multiplexer) { this->multiplexer_ = multiplexer; }
+  void set_gain(ADS1115Gain gain) { this->gain_ = gain; }
+  void set_resolution(ADS1115Resolution resolution) { this->resolution_ = resolution; }
+  float sample() override;
+
+  void dump_config() override;
+
+ protected:
+  ADS1115Multiplexer multiplexer_;
+  ADS1115Gain gain_;
+  ADS1115Resolution resolution_;
+};
+
+}  // namespace ads1115
+}  // namespace esphome

esphome/components/esp32/__init__.py

@@ -316,17 +316,26 @@ def _parse_platform_version(value):
 
 
 def _detect_variant(value):
-    if CONF_VARIANT not in value:
-        board = value[CONF_BOARD]
-        if board not in BOARDS:
+    board = value[CONF_BOARD]
+    if board in BOARDS:
+        variant = BOARDS[board][KEY_VARIANT]
+        if CONF_VARIANT in value and variant != value[CONF_VARIANT]:
             raise cv.Invalid(
-                "This board is unknown, please set the variant manually",
+                f"Option '{CONF_VARIANT}' does not match selected board.",
+                path=[CONF_VARIANT],
+            )
+        value = value.copy()
+        value[CONF_VARIANT] = variant
+    else:
+        if CONF_VARIANT not in value:
+            raise cv.Invalid(
+                "This board is unknown, if you are sure you want to compile with this board selection, "
+                f"override with option '{CONF_VARIANT}'",
                 path=[CONF_BOARD],
             )
-
-        value = value.copy()
-        value[CONF_VARIANT] = BOARDS[board][KEY_VARIANT]
-
+        _LOGGER.warning(
+            "This board is unknown. Make sure the chosen chip component is correct.",
+        )
     return value
 
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -364,7 +364,11 @@ void ESP32BLETracker::gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_ga
 }
 
 void ESP32BLETracker::gap_scan_set_param_complete_(const esp_ble_gap_cb_param_t::ble_scan_param_cmpl_evt_param &param) {
-  this->scan_set_param_failed_ = param.status;
+  if (param.status == ESP_BT_STATUS_DONE) {
+    this->scan_set_param_failed_ = ESP_BT_STATUS_SUCCESS;
+  } else {
+    this->scan_set_param_failed_ = param.status;
+  }
 }
 
 void ESP32BLETracker::gap_scan_start_complete_(const esp_ble_gap_cb_param_t::ble_scan_start_cmpl_evt_param &param) {

esphome/components/ft63x6/ft63x6.cpp

@@ -32,7 +32,7 @@ void FT63X6Touchscreen::setup() {
   if (this->interrupt_pin_ != nullptr) {
     this->interrupt_pin_->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
     this->interrupt_pin_->setup();
-    this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
+    this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_ANY_EDGE);
   }
 
   if (this->reset_pin_ != nullptr) {
@@ -78,13 +78,12 @@ void FT63X6Touchscreen::update_touches() {
   uint16_t touch_id, x, y;
 
   uint8_t touches = this->read_touch_number_();
+  ESP_LOGV(TAG, "Touches found: %d", touches);
   if ((touches == 0x00) || (touches == 0xff)) {
     // ESP_LOGD(TAG, "No touches detected");
     return;
   }
 
-  ESP_LOGV(TAG, "Touches found: %d", touches);
-
   for (auto point = 0; point < touches; point++) {
     if (((this->read_touch_event_(point)) & 0x01) == 0) {  // checking event flag bit 6 if it is null
       touch_id = this->read_touch_id_(point);              // id1 = 0 or 1

esphome/components/internal_temperature/internal_temperature.cpp

@@ -55,11 +55,13 @@ void InternalTemperatureSensor::update() {
   uint32_t raw, result;
   result = temp_single_get_current_temperature(&raw);
   success = (result == 0);
-#ifdef USE_LIBRETINY_VARIANT_BK7231T
+#if defined(USE_LIBRETINY_VARIANT_BK7231N)
+  temperature = raw * -0.38f + 156.0f;
+#elif defined(USE_LIBRETINY_VARIANT_BK7231T)
   temperature = raw * 0.04f;
-#else
+#else   // USE_LIBRETINY_VARIANT
   temperature = raw * 0.128f;
-#endif  // USE_LIBRETINY_VARIANT_BK7231T
+#endif  // USE_LIBRETINY_VARIANT
 #endif  // USE_BK72XX
   if (success && std::isfinite(temperature)) {
     this->publish_state(temperature);

esphome/components/libretiny/__init__.py

@@ -1,6 +1,10 @@
 import json
 import logging
-from os.path import dirname, isfile, join
+from os.path import (
+    dirname,
+    isfile,
+    join,
+)
 
 import esphome.codegen as cg
 import esphome.config_validation as cv
@@ -55,15 +59,25 @@ def _detect_variant(value):
     component: LibreTinyComponent = CORE.data[KEY_LIBRETINY][KEY_COMPONENT_DATA]
     board = value[CONF_BOARD]
     # read board-default family if not specified
-    if CONF_FAMILY not in value:
-        if board not in component.boards:
+    if board not in component.boards:
+        if CONF_FAMILY not in value:
             raise cv.Invalid(
-                "This board is unknown, please set the family manually. "
-                "Also, make sure the chosen chip component is correct.",
+                "This board is unknown, if you are sure you want to compile with this board selection, "
+                f"override with option '{CONF_FAMILY}'",
                 path=[CONF_BOARD],
             )
+        _LOGGER.warning(
+            "This board is unknown. Make sure the chosen chip component is correct.",
+        )
+    else:
+        family = component.boards[board][KEY_FAMILY]
+        if CONF_FAMILY in value and family != value[CONF_FAMILY]:
+            raise cv.Invalid(
+                f"Option '{CONF_FAMILY}' does not match selected board.",
+                path=[CONF_FAMILY],
+            )
         value = value.copy()
-        value[CONF_FAMILY] = component.boards[board][KEY_FAMILY]
+        value[CONF_FAMILY] = family
     # read component name matching this family
     value[CONF_COMPONENT_ID] = FAMILY_COMPONENT[value[CONF_FAMILY]]
     # make sure the chosen component matches the family
@@ -72,11 +86,6 @@ def _detect_variant(value):
             f"The chosen family doesn't belong to '{component.name}' component. The correct component is '{value[CONF_COMPONENT_ID]}'",
             path=[CONF_FAMILY],
         )
-    # warn anyway if the board wasn't found
-    if board not in component.boards:
-        _LOGGER.warning(
-            "This board is unknown. Make sure the chosen chip component is correct.",
-        )
     return value
 
 

esphome/components/sensor/filter.cpp

@@ -359,11 +359,15 @@ OrFilter::OrFilter(std::vector<Filter *> filters) : filters_(std::move(filters))
 OrFilter::PhiNode::PhiNode(OrFilter *or_parent) : or_parent_(or_parent) {}
 
 optional<float> OrFilter::PhiNode::new_value(float value) {
-  this->or_parent_->output(value);
+  if (!this->or_parent_->has_value_) {
+    this->or_parent_->output(value);
+    this->or_parent_->has_value_ = true;
+  }
 
   return {};
 }
 optional<float> OrFilter::new_value(float value) {
+  this->has_value_ = false;
   for (Filter *filter : this->filters_)
     filter->input(value);
 

esphome/components/sensor/filter.h

@@ -388,6 +388,7 @@ class OrFilter : public Filter {
   };
 
   std::vector<Filter *> filters_;
+  bool has_value_{false};
   PhiNode phi_;
 };
 

esphome/components/tuya/climate/__init__.py

@@ -208,7 +208,7 @@ async def to_code(config):
         cg.add(var.set_switch_id(switch_datapoint))
 
     if active_state_config := config.get(CONF_ACTIVE_STATE):
-        cg.add(var.set_active_state_id(CONF_DATAPOINT))
+        cg.add(var.set_active_state_id(active_state_config.get(CONF_DATAPOINT)))
         if (heating_value := active_state_config.get(CONF_HEATING_VALUE)) is not None:
             cg.add(var.set_active_state_heating_value(heating_value))
         if (cooling_value := active_state_config.get(CONF_COOLING_VALUE)) is not None:
@@ -219,14 +219,10 @@ async def to_code(config):
             cg.add(var.set_active_state_fanonly_value(fanonly_value))
     else:
         if heating_state_pin_config := config.get(CONF_HEATING_STATE_PIN):
-            heating_state_pin = await cg.gpio_pin_expression(
-                config(heating_state_pin_config)
-            )
+            heating_state_pin = await cg.gpio_pin_expression(heating_state_pin_config)
             cg.add(var.set_heating_state_pin(heating_state_pin))
         if cooling_state_pin_config := config.get(CONF_COOLING_STATE_PIN):
-            cooling_state_pin = await cg.gpio_pin_expression(
-                config(cooling_state_pin_config)
-            )
+            cooling_state_pin = await cg.gpio_pin_expression(cooling_state_pin_config)
             cg.add(var.set_cooling_state_pin(cooling_state_pin))
 
     if target_temperature_datapoint := config.get(CONF_TARGET_TEMPERATURE_DATAPOINT):
@@ -254,11 +250,11 @@ async def to_code(config):
 
     if preset_config := config.get(CONF_PRESET, {}):
         if eco_config := preset_config.get(CONF_ECO, {}):
-            cg.add(var.set_eco_id(CONF_DATAPOINT))
+            cg.add(var.set_eco_id(eco_config.get(CONF_DATAPOINT)))
             if eco_temperature := eco_config.get(CONF_TEMPERATURE):
                 cg.add(var.set_eco_temperature(eco_temperature))
-        if CONF_SLEEP in preset_config:
-            cg.add(var.set_sleep_id(CONF_DATAPOINT))
+        if sleep_config := preset_config.get(CONF_SLEEP, {}):
+            cg.add(var.set_sleep_id(sleep_config.get(CONF_DATAPOINT)))
 
     if swing_mode_config := config.get(CONF_SWING_MODE):
         if swing_vertical_datapoint := swing_mode_config.get(CONF_VERTICAL_DATAPOINT):
@@ -268,7 +264,7 @@ async def to_code(config):
         ):
             cg.add(var.set_swing_horizontal_id(swing_horizontal_datapoint))
     if fan_mode_config := config.get(CONF_FAN_MODE):
-        cg.add(var.set_fan_speed_id(CONF_DATAPOINT))
+        cg.add(var.set_fan_speed_id(fan_mode_config.get(CONF_DATAPOINT)))
         if (fan_auto_value := fan_mode_config.get(CONF_AUTO_VALUE)) is not None:
             cg.add(var.set_fan_speed_auto_value(fan_auto_value))
         if (fan_low_value := fan_mode_config.get(CONF_LOW_VALUE)) is not None:

esphome/components/voice_assistant/voice_assistant.cpp

@@ -729,6 +729,7 @@ void VoiceAssistant::on_event(const api::VoiceAssistantEventResponse &msg) {
 }
 
 void VoiceAssistant::on_audio(const api::VoiceAssistantAudio &msg) {
+#ifdef USE_SPEAKER  // We should never get to this function if there is no speaker anyway
   if (this->speaker_buffer_index_ + msg.data.length() < SPEAKER_BUFFER_SIZE) {
     memcpy(this->speaker_buffer_ + this->speaker_buffer_index_, msg.data.data(), msg.data.length());
     this->speaker_buffer_index_ += msg.data.length();
@@ -737,6 +738,7 @@ void VoiceAssistant::on_audio(const api::VoiceAssistantAudio &msg) {
   } else {
     ESP_LOGE(TAG, "Cannot receive audio, buffer is full");
   }
+#endif
 }
 
 VoiceAssistant *global_voice_assistant = nullptr;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

esphome/components/wifi/wifi_component.cpp

@@ -128,7 +128,7 @@ void WiFiComponent::loop() {
       case WIFI_COMPONENT_STATE_COOLDOWN: {
         this->status_set_warning();
         if (millis() - this->action_started_ > 5000) {
-          if (this->fast_connect_) {
+          if (this->fast_connect_ || this->retry_hidden_) {
             this->start_connecting(this->sta_[0], false);
           } else {
             this->start_scanning();
@@ -591,6 +591,9 @@ void WiFiComponent::check_connecting_finished() {
       return;
     }
 
+    // We won't retry hidden networks unless a reconnect fails more than three times again
+    this->retry_hidden_ = false;
+
     ESP_LOGI(TAG, "WiFi Connected!");
     this->print_connect_params_();
 
@@ -668,10 +671,11 @@ void WiFiComponent::retry_connect() {
       this->wifi_mode_(false, {});
       delay(100);  // NOLINT
       this->num_retried_ = 0;
+      this->retry_hidden_ = false;
     } else {
       // Try hidden networks after 3 failed retries
       ESP_LOGD(TAG, "Retrying with hidden networks...");
-      this->fast_connect_ = true;
+      this->retry_hidden_ = true;
       this->num_retried_++;
     }
   } else {

esphome/components/wifi/wifi_component.h

@@ -371,6 +371,7 @@ class WiFiComponent : public Component {
   std::vector<WiFiSTAPriority> sta_priorities_;
   WiFiAP selected_ap_;
   bool fast_connect_{false};
+  bool retry_hidden_{false};
 
   bool has_ap_{false};
   WiFiAP ap_;

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.4.0b1"
+__version__ = "2024.4.1"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/core/base_automation.h

@@ -134,7 +134,7 @@ class ProjectUpdateTrigger : public Trigger<std::string>, public Component {
     uint32_t hash = fnv1_hash(ESPHOME_PROJECT_NAME);
     ESPPreferenceObject pref = global_preferences->make_preference<char[30]>(hash, true);
     char previous_version[30];
-    char current_version[30] = ESPHOME_PROJECT_VERSION;
+    char current_version[30] = ESPHOME_PROJECT_VERSION_30;
     if (pref.load(&previous_version)) {
       int cmp = strcmp(previous_version, current_version);
       if (cmp < 0) {

esphome/core/config.py

@@ -394,6 +394,7 @@ async def to_code(config):
     if project_conf := config.get(CONF_PROJECT):
         cg.add_define("ESPHOME_PROJECT_NAME", project_conf[CONF_NAME])
         cg.add_define("ESPHOME_PROJECT_VERSION", project_conf[CONF_VERSION])
+        cg.add_define("ESPHOME_PROJECT_VERSION_30", project_conf[CONF_VERSION][:30])
         for conf in project_conf.get(CONF_ON_UPDATE, []):
             trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID])
             await cg.register_component(trigger, conf)

esphome/core/defines.h

@@ -11,6 +11,7 @@
 #define ESPHOME_BOARD "dummy_board"
 #define ESPHOME_PROJECT_NAME "dummy project"
 #define ESPHOME_PROJECT_VERSION "v2"
+#define ESPHOME_PROJECT_VERSION_30 "v2"
 #define ESPHOME_VARIANT "ESP32"
 
 // Feature flags

esphome/mqtt.py

@@ -10,6 +10,7 @@ import paho.mqtt.client as mqtt
 
 from esphome.const import (
     CONF_BROKER,
+    CONF_CERTIFICATE_AUTHORITY,
     CONF_DISCOVERY_PREFIX,
     CONF_ESPHOME,
     CONF_LOG_TOPIC,
@@ -99,7 +100,9 @@ def prepare(
     elif username:
         client.username_pw_set(username, password)
 
-    if config[CONF_MQTT].get(CONF_SSL_FINGERPRINTS):
+    if config[CONF_MQTT].get(CONF_SSL_FINGERPRINTS) or config[CONF_MQTT].get(
+        CONF_CERTIFICATE_AUTHORITY
+    ):
         if sys.version_info >= (2, 7, 13):
             tls_version = ssl.PROTOCOL_TLS  # pylint: disable=no-member
         else:

requirements.txt

@@ -12,7 +12,7 @@ pyserial==3.5
 platformio==6.1.13  # When updating platformio, also update Dockerfile
 esptool==4.7.0
 click==8.1.7
-esphome-dashboard==20240319.0
+esphome-dashboard==20240412.0
 aioesphomeapi==23.2.0
 zeroconf==0.131.0
 python-magic==0.4.27

tests/components/internal_temperature/test.bk72xx.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/internal_temperature/test.esp32-c3-idf.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/internal_temperature/test.esp32-c3.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/internal_temperature/test.esp32-idf.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/internal_temperature/test.esp32.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/internal_temperature/test.rp2040.yaml

@@ -0,0 +1,3 @@
+sensor:
+  - platform: internal_temperature
+    name: "Internal Temperature"

tests/components/remote_transmitter/common-buttons.yaml

@@ -176,3 +176,11 @@ button:
             0x00,
             0x05,
           ]
+  - platform: template
+    name: Dooya
+    on_press:
+      remote_transmitter.transmit_dooya:
+        id: 0x123456
+        channel: 1
+        button: 1
+        check: 1