cpustates can now handle the lack of a start marker in three ways:
- try: If the start marker is present only the correct section of the trace
will be used, if its not the whole trace will be used.
- error: An error will be raised if the start marker is missing
- ignore: The markers are ignored and the whole trace is always used.
If an exception is raised inside a generator it cannot be continued.
To get around this exceptions are now caught and later output via the
logger.
Also added logger setup when running cpustates as a standalone script
This allows the return value of a function to be cached so that
when it is called in the future the function does not need to
run.
Borrowed from: https://github.com/ARM-software/devlib
Before WA would raise a error message that wasn't very clear.
Now when cpustates tries to nudge cores and and error occurs it
will only show a warning (which promts users to check if the cpu is
hot plugged out) and keep going with the reset of the run without
causing errors in other WA extensions.
Previously the WA device name was used when searching for revent files.
Since most were `generic_android` this made it difficult to keep revent
files for multiple android devices. Now it the device model is used instead.
If a file with the device model is not found it will fall back to the WA
device name.
kick_off has been changed to behave the same as AndroidDevice.
Said changes caused kill all to fail on rooted devices. Killall will now
behave in the same way as kick_off, if specifically told to (or not to)
run as root it will. Otherwise it will run as root if the device is rooted
Servo is a debug board used for Chromium OS test and development. Among other uses, it allows
access to the built in power monitors (if present) of a Chrome OS device. More information on
Servo board can be found in the link bellow:
https://www.chromium.org/chromium-os/servo
based on: 03ede10739
and: 9a0dc55b55
These are now gathered via `getprop` rather than trying to parse the
build.prop file directly.
This fixes issues with build.prop files that have imports.
Blogbench is a portable filesystem benchmark that tries to reproduce the
load of a real-world busy file server.
Signed-off-by: Chase Qi <chase.qi@linaro.org>
The stock camera app as of Android M has changed. This commit updates
the ui automation to work with this new app. As part of this change
it was required to bump the API level of the ui automation to 18.
Also made the teardown of the capture workload close the app like the
record workload.
Added splitVersion and compareVersions functions allow versions strings
like "3.2.045" to be compared.
Also fixed the build script to now copy to the correct folder
Some characters would be interpreted by the shell thus breaking the
command. Adding quotes around the parameters solved this.
N.B Space still needs to be replaced.
stress-ng will stress test a computer system in various selectable ways.
It was designed to exercise various physical subsystems of a computer as
well as the various operating system kernel interfaces.
Signed-off-by: Chase Qi <chase.qi@linaro.org>
Previously the sensor name was just appeneded to the end of the
previous sensors name.
Now the hwmon name is added as a classifier of the metric.
If the hwmon sensor has a label, the metric will use this for its name,
if it does not then the sensors kind and ID will be used e.g. temp3
Due to the previous commits, this command no longer works properly.
It turns out there is an issue with using multiple levels of escaping.
It seems that bash handles the backslashes and single quotes separately
incorrectly processing our escaping. To get around this we are writing the
sqlite command to a shell script file and running that.
This seems to be the only case in WA at the moment that requires this,
if more show up/when WA moves to devlib it should use the devlib shutil
mechanism.
They way we were attempting to get return codes before always gave
us a return code of the previous echo, therefore always `0`.
This commit adds the newline into the last echo.
Previously, only reports that were generated were returned. With this
commit, there will be an entry for each active reporter in the returned
list. If a reporter did not produce a valid report, the entry will be
None.
This ensures consistent output, even if a run time issue causes a
reporter not to produce a report (e.g. if cpufreq events were not
enabled).
It is not possible to read frequencies from a core that has been hotplugged.
The code will now set the current and max frequencies of hotplugged cores
to None.
This still doesn't work for devices that have dynamic hotplug enabled
Commit 724f6e590e changed sysfile_getter
behavior to first tar up copied files and then gzip them. Tarball name
needs to be updated to not include '.gz' extension.
Previously Linaro U-Boot releases had a bug where they used \n\r
as the line ending. This has now been fixed which caused
issues with WA. WA now detects the U-Boot version and uses the
coresponding line ending.
The default boot args have been removed since these cause issues with
the latest Linaro builds, which boot correctly without any bootargs.
Also made a regex string a raw-string.
If uninstall fails, "pm clear" should be called to make sure that the
next time the app is launched it starts from a known state (which would
normally be ensured by the uninstall).
It's possible that there is already a version of an app on target that
differs form the version of the apk on the host. In such cases, WA will
usually try to uninstall the target version and install the host
version.
It's possible that the uninstall may fail. If that happens, it will be
reported as a warning but workload exectuion will proceed with the
target version. In this case, apk_version would have already been set to
that of the host apk. This change ensures that the APK version is
correctly set to the target version (the one that actually ran).
Fixed error in percentage when frequency is 'None'. Now default to 0 in these cases
cpu_utilisation is now a separate parameter in cpustate. Now generates a floating point number representing the utilisation based on the maximum frequency of the capture. No longer performs averaging of values, this can be done as a post-processing step
cpu utilisation now based on the max cpu freq per core, not max captured freq overall
