sascha/workload-automation
1
0
Fork 0
mirror of https://github.com/ARM-software/workload-automation.git synced 2025-09-03 20:02:39 +01:00
Code Issues Releases Wiki Activity

Initial commit of open source Workload Automation.

Browse Source
This commit is contained in:
Sergei Trofimov
2015-03-10 13:09:31 +00:00
commit a747ec7e4c
412 changed files with 41401 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

322
wlauto/instrumentation/trace_cmd/__init__.py Normal file
View File

@@ -0,0 +1,322 @@
# Copyright 2013-2015 ARM Limited
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# pylint: disable=W0613,E1101
from __future__ import division
import os
import time
import subprocess
from collections import defaultdict
from wlauto import Instrument, Parameter, Executable
from wlauto.exceptions import InstrumentError, ConfigError
from wlauto.core import signal
from wlauto.utils.types import boolean
OUTPUT_TRACE_FILE = 'trace.dat'
OUTPUT_TEXT_FILE = '{}.txt'.format(os.path.splitext(OUTPUT_TRACE_FILE)[0])
TIMEOUT = 180
class TraceCmdInstrument(Instrument):
name = 'trace-cmd'
description = """
trace-cmd is an instrument which interacts with Ftrace Linux kernel internal
tracer
From trace-cmd man page:
trace-cmd command interacts with the Ftrace tracer that is built inside the
Linux kernel. It interfaces with the Ftrace specific files found in the
debugfs file system under the tracing directory.
trace-cmd reads a list of events it will trace, which can be specified in
the config file as follows ::
trace_events = ['irq*', 'power*']
If no event is specified in the config file, trace-cmd traces the following events:
- sched*
- irq*
- power*
- cpufreq_interactive*
The list of available events can be obtained by rooting and running the following
command line on the device ::
trace-cmd list
You may also specify ``trace_buffer_size`` setting which must be an integer that will
be used to set the ftrace buffer size. It will be interpreted as KB::
trace_cmd_buffer_size = 8000
The maximum buffer size varies from device to device, but there is a maximum and trying
to set buffer size beyound that will fail. If you plan on collecting a lot of trace over
long periods of time, the buffer size will not be enough and you will only get trace for
the last portion of your run. To deal with this you can set the ``trace_mode`` setting to
``'record'`` (the default is ``'start'``)::
trace_cmd_mode = 'record'
This will cause trace-cmd to trace into file(s) on disk, rather than the buffer, and so the
limit for the max size of the trace is set by the storage available on device. Bear in mind
that ``'record'`` mode *is* more instrusive than the default, so if you do not plan on
generating a lot of trace, it is best to use the default ``'start'`` mode.
.. note:: Mode names correspend to the underlying trace-cmd exectuable's command used to
implement them. You can find out more about what is happening in each case from
trace-cmd documentation: https://lwn.net/Articles/341902/.
This instrument comes with an Android trace-cmd binary that will be copied and used on the
device, however post-processing will be done on-host and you must have trace-cmd installed and
in your path. On Ubuntu systems, this may be done with::
sudo apt-get install trace-cmd
"""
parameters = [
Parameter('events', kind=list, default=['sched*', 'irq*', 'power*', 'cpufreq_interactive*'],
global_alias='trace_events',
description="""
Specifies the list of events to be traced. Each event in the list will be passed to
trace-cmd with -e parameter and must be in the format accepted by trace-cmd.
"""),
Parameter('mode', default='start', allowed_values=['start', 'record'],
global_alias='trace_mode',
description="""
Trace can be collected using either 'start' or 'record' trace-cmd
commands. In 'start' mode, trace will be collected into the ftrace buffer;
in 'record' mode, trace will be written into a file on the device's file
system. 'start' mode is (in theory) less intrusive than 'record' mode, however
it is limited by the size of the ftrace buffer (which is configurable --
see ``buffer_size`` -- but only up to a point) and that may overflow
for long-running workloads, which will result in dropped events.
"""),
Parameter('buffer_size', kind=int, default=None,
global_alias='trace_buffer_size',
description="""
Attempt to set ftrace buffer size to the specified value (in KB). Default buffer size
may need to be increased for long-running workloads, or if a large number
of events have been enabled. Note: there is a maximum size that the buffer can
be set, and that varies from device to device. Attempting to set buffer size higher
than this will fail. In that case, this instrument will set the size to the highest
possible value by going down from the specified size in ``buffer_size_step`` intervals.
"""),
Parameter('buffer_size_step', kind=int, default=1000,
global_alias='trace_buffer_size_step',
description="""
Defines the decremental step used if the specified ``buffer_size`` could not be set.
This will be subtracted form the buffer size until set succeeds or size is reduced to
1MB.
"""),
Parameter('buffer_size_file', default='/d/tracing/buffer_size_kb',
description="""
Path to the debugs file that may be used to set ftrace buffer size. This should need
to be modified for the vast majority devices.
"""),
Parameter('report', kind=boolean, default=True,
description="""
Specifies whether host-side reporting should be performed once the binary trace has been
pulled form the device.
.. note:: This requires the latest version of trace-cmd to be installed on the host (the
one in your distribution's repos may be too old).
"""),
Parameter('no_install', kind=boolean, default=False,
description="""
Do not install the bundled trace-cmd and use the one on the device instead. If there is
not already a trace-cmd on the device, an error is raised.
"""),
]
def __init__(self, device, **kwargs):
super(TraceCmdInstrument, self).__init__(device, **kwargs)
self.trace_cmd = None
self.event_string = _build_trace_events(self.events)
self.output_file = os.path.join(self.device.working_directory, OUTPUT_TRACE_FILE)
self.temp_trace_file = self.device.path.join(self.device.working_directory, OUTPUT_TRACE_FILE)
def on_run_init(self, context):
if not self.device.is_rooted:
raise InstrumentError('trace-cmd instrument cannot be used on an unrooted device.')
if not self.no_install:
host_file = context.resolver.get(Executable(self, self.device.abi, 'trace-cmd'))
self.trace_cmd = self.device.install_executable(host_file)
else:
if not self.device.is_installed('trace-cmd'):
raise ConfigError('No trace-cmd found on device and no_install=True is specified.')
self.trace_cmd = 'trace-cmd'
# Register ourselves as absolute last event before and
# first after so we can mark the trace at the right time
signal.connect(self.insert_start_mark, signal.BEFORE_WORKLOAD_EXECUTION, priority=11)
signal.connect(self.insert_end_mark, signal.AFTER_WORKLOAD_EXECUTION, priority=11)
def setup(self, context):
if self.mode == 'start':
if self.buffer_size:
self._set_buffer_size()
self.device.execute('{} reset'.format(self.trace_cmd), as_root=True, timeout=180)
elif self.mode == 'record':
pass
else:
raise ValueError('Bad mode: {}'.format(self.mode)) # should never get here
def start(self, context):
self.start_time = time.time() # pylint: disable=attribute-defined-outside-init
if self.mode == 'start':
self.device.execute('{} start {}'.format(self.trace_cmd, self.event_string), as_root=True)
elif self.mode == 'record':
self.device.kick_off('{} record -o {} {}'.format(self.trace_cmd, self.output_file, self.event_string))
else:
raise ValueError('Bad mode: {}'.format(self.mode)) # should never get here
def stop(self, context):
self.stop_time = time.time() # pylint: disable=attribute-defined-outside-init
if self.mode == 'start':
self.device.execute('{} stop'.format(self.trace_cmd), timeout=60, as_root=True)
elif self.mode == 'record':
# There will be a trace-cmd worker process per CPU core plus a main
# control trace-cmd process. Interrupting the control process will
# trigger the generation of the single binary trace file.
trace_cmds = self.device.ps(name=self.trace_cmd)
if not trace_cmds:
raise InstrumentError('Could not find running trace-cmd on device.')
# The workers will have their PPID set to the PID of control.
parent_map = defaultdict(list)
for entry in trace_cmds:
parent_map[entry.ppid].append(entry.pid)
controls = [v[0] for _, v in parent_map.iteritems()
if len(v) == 1 and v[0] in parent_map]
if len(controls) > 1:
self.logger.warning('More than one trace-cmd instance found; stopping all of them.')
for c in controls:
self.device.kill(c, signal='INT', as_root=True)
else:
raise ValueError('Bad mode: {}'.format(self.mode)) # should never get here
def update_result(self, context): # NOQA pylint: disable=R0912
if self.mode == 'start':
self.device.execute('{} extract -o {}'.format(self.trace_cmd, self.output_file),
timeout=TIMEOUT, as_root=True)
elif self.mode == 'record':
self.logger.debug('Waiting for trace.dat to be generated.')
while self.device.ps(name=self.trace_cmd):
time.sleep(2)
else:
raise ValueError('Bad mode: {}'.format(self.mode)) # should never get here
# The size of trace.dat will depend on how long trace-cmd was running.
# Therefore timout for the pull command must also be adjusted
# accordingly.
pull_timeout = (self.stop_time - self.start_time)
self.device.pull_file(self.output_file, context.output_directory, timeout=pull_timeout)
context.add_iteration_artifact('bintrace', OUTPUT_TRACE_FILE, kind='data',
description='trace-cmd generated ftrace dump.')
local_trace_file = os.path.join(context.output_directory, OUTPUT_TRACE_FILE)
local_txt_trace_file = os.path.join(context.output_directory, OUTPUT_TEXT_FILE)
if self.report:
# To get the output of trace.dat, trace-cmd must be installed
# This is done host-side because the generated file is very large
if not os.path.isfile(local_trace_file):
self.logger.warning('Not generating trace.txt, as trace.bin does not exist.')
try:
command = 'trace-cmd report {} > {}'.format(local_trace_file, local_txt_trace_file)
self.logger.debug(command)
process = subprocess.Popen(command, stderr=subprocess.PIPE, shell=True)
_, error = process.communicate()
if process.returncode:
raise InstrumentError('trace-cmd returned non-zero exit code {}'.format(process.returncode))
if error:
# logged at debug level, as trace-cmd always outputs some
# errors that seem benign.
self.logger.debug(error)
if os.path.isfile(local_txt_trace_file):
context.add_iteration_artifact('txttrace', OUTPUT_TEXT_FILE, kind='export',
description='trace-cmd generated ftrace dump.')
self.logger.debug('Verifying traces.')
with open(local_txt_trace_file) as fh:
for line in fh:
if 'EVENTS DROPPED' in line:
self.logger.warning('Dropped events detected.')
break
else:
self.logger.debug('Trace verified.')
else:
self.logger.warning('Could not generate trace.txt.')
except OSError:
raise InstrumentError('Could not find trace-cmd. Please make sure it is installed and is in PATH.')
def teardown(self, context):
self.device.delete_file(os.path.join(self.device.working_directory, OUTPUT_TRACE_FILE))
def on_run_end(self, context):
pass
def validate(self):
if self.report and os.system('which trace-cmd > /dev/null'):
raise InstrumentError('trace-cmd is not in PATH; is it installed?')
if self.buffer_size:
if self.mode == 'record':
self.logger.debug('trace_buffer_size specified with record mode; it will be ignored.')
else:
try:
int(self.buffer_size)
except ValueError:
raise ConfigError('trace_buffer_size must be an int.')
def insert_start_mark(self, context):
# trace marker appears in ftrace as an ftrace/print event with TRACE_MARKER_START in info field
self.device.set_sysfile_value("/sys/kernel/debug/tracing/trace_marker", "TRACE_MARKER_START", verify=False)
def insert_end_mark(self, context):
# trace marker appears in ftrace as an ftrace/print event with TRACE_MARKER_STOP in info field
self.device.set_sysfile_value("/sys/kernel/debug/tracing/trace_marker", "TRACE_MARKER_STOP", verify=False)
def _set_buffer_size(self):
target_buffer_size = self.buffer_size
attempt_buffer_size = target_buffer_size
buffer_size = 0
floor = 1000 if target_buffer_size > 1000 else target_buffer_size
while attempt_buffer_size >= floor:
self.device.set_sysfile_value(self.buffer_size_file, attempt_buffer_size, verify=False)
buffer_size = self.device.get_sysfile_value(self.buffer_size_file, kind=int)
if buffer_size == attempt_buffer_size:
break
else:
attempt_buffer_size -= self.buffer_size_step
if buffer_size == target_buffer_size:
return
while attempt_buffer_size < target_buffer_size:
attempt_buffer_size += self.buffer_size_step
self.device.set_sysfile_value(self.buffer_size_file, attempt_buffer_size, verify=False)
buffer_size = self.device.get_sysfile_value(self.buffer_size_file, kind=int)
if attempt_buffer_size != buffer_size:
self.logger.warning('Failed to set trace buffer size to {}, value set was {}'.format(target_buffer_size, buffer_size))
break
def _build_trace_events(events):
event_string = ' '.join(['-e {}'.format(e) for e in events])
return event_string