sascha/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-09-02 11:22:24 +01:00
Code Issues Releases Wiki Activity
Files
f12bcc621c5fdd5726965b7f104a780376e8b90e
esphome/esphome/components/esp32_ble_client/ble_client_base.cpp
J. Nick Koston f12bcc621c dry, review
2025-08-21 09:00:01 -05:00

662 lines
26 KiB
C++
Raw Blame History

#include "ble_client_base.h"
#include "esphome/core/helpers.h"
#include "esphome/core/log.h"
#ifdef USE_ESP32
#include <esp_gap_ble_api.h>
#include <esp_gatt_defs.h>
namespace esphome::esp32_ble_client {
static const char *const TAG = "esp32_ble_client";
// Intermediate connection parameters for standard operation
// ESP-IDF defaults (12.5-15ms) are too slow for stable connections through WiFi-based BLE proxies,
// causing disconnections. These medium parameters balance responsiveness with bandwidth usage.
static const uint16_t MEDIUM_MIN_CONN_INTERVAL = 0x07; // 7 * 1.25ms = 8.75ms
static const uint16_t MEDIUM_MAX_CONN_INTERVAL = 0x09; // 9 * 1.25ms = 11.25ms
// The timeout value was increased from 6s to 8s to address stability issues observed
// in certain BLE devices when operating through WiFi-based BLE proxies. The longer
// timeout reduces the likelihood of disconnections during periods of high latency.
static const uint16_t MEDIUM_CONN_TIMEOUT = 800; // 800 * 10ms = 8s
// Fastest connection parameters for devices with short discovery timeouts
static const uint16_t FAST_MIN_CONN_INTERVAL = 0x06; // 6 * 1.25ms = 7.5ms (BLE minimum)
static const uint16_t FAST_MAX_CONN_INTERVAL = 0x06; // 6 * 1.25ms = 7.5ms
static const uint16_t FAST_CONN_TIMEOUT = 1000; // 1000 * 10ms = 10s
static const esp_bt_uuid_t NOTIFY_DESC_UUID = {
.len = ESP_UUID_LEN_16,
.uuid =
{
.uuid16 = ESP_GATT_UUID_CHAR_CLIENT_CONFIG,
},
};
void BLEClientBase::setup() {
static uint8_t connection_index = 0;
this->connection_index_ = connection_index++;
}
void BLEClientBase::set_state(espbt::ClientState st) {
ESP_LOGV(TAG, "[%d] [%s] Set state %d", this->connection_index_, this->address_str_.c_str(), (int) st);
ESPBTClient::set_state(st);
if (st == espbt::ClientState::READY_TO_CONNECT) {
// Enable loop for state processing
this->enable_loop();
// Connect immediately instead of waiting for next loop
this->connect();
}
}
void BLEClientBase::loop() {
if (!esp32_ble::global_ble->is_active()) {
this->set_state(espbt::ClientState::INIT);
return;
}
if (this->state_ == espbt::ClientState::INIT) {
auto ret = esp_ble_gattc_app_register(this->app_id);
if (ret) {
ESP_LOGE(TAG, "gattc app register failed. app_id=%d code=%d", this->app_id, ret);
this->mark_failed();
}
this->set_state(espbt::ClientState::IDLE);
}
// If its idle, we can disable the loop as set_state
// will enable it again when we need to connect.
else if (this->state_ == espbt::ClientState::IDLE) {
this->disable_loop();
}
}
float BLEClientBase::get_setup_priority() const { return setup_priority::AFTER_BLUETOOTH; }
void BLEClientBase::dump_config() {
ESP_LOGCONFIG(TAG,
" Address: %s\n"
" Auto-Connect: %s",
this->address_str().c_str(), TRUEFALSE(this->auto_connect_));
ESP_LOGCONFIG(TAG, " State: %s", espbt::client_state_to_string(this->state()));
if (this->status_ == ESP_GATT_NO_RESOURCES) {
ESP_LOGE(TAG, " Failed due to no resources. Try to reduce number of BLE clients in config.");
} else if (this->status_ != ESP_GATT_OK) {
ESP_LOGW(TAG, " Failed due to error code %d", this->status_);
}
}
#ifdef USE_ESP32_BLE_DEVICE
bool BLEClientBase::parse_device(const espbt::ESPBTDevice &device) {
if (!this->auto_connect_)
return false;
if (this->address_ == 0 || device.address_uint64() != this->address_)
return false;
if (this->state_ != espbt::ClientState::IDLE && this->state_ != espbt::ClientState::SEARCHING)
return false;
this->log_event_("Found device");
if (ESPHOME_LOG_LEVEL >= ESPHOME_LOG_LEVEL_DEBUG)
esp32_ble_tracker::global_esp32_ble_tracker->print_bt_device_info(device);
this->set_state(espbt::ClientState::DISCOVERED);
this->set_address(device.address_uint64());
this->remote_addr_type_ = device.get_address_type();
return true;
}
#endif
void BLEClientBase::connect() {
ESP_LOGI(TAG, "[%d] [%s] 0x%02x Connecting", this->connection_index_, this->address_str_.c_str(),
this->remote_addr_type_);
this->paired_ = false;
// Open the connection without setting connection parameters
// Parameters will be set after connection is established if needed
auto ret = esp_ble_gattc_open(this->gattc_if_, this->remote_bda_, this->remote_addr_type_, true);
if (ret) {
this->log_gattc_warning_("esp_ble_gattc_open", ret);
this->set_state(espbt::ClientState::IDLE);
} else {
this->set_state(espbt::ClientState::CONNECTING);
}
}
esp_err_t BLEClientBase::pair() { return esp_ble_set_encryption(this->remote_bda_, ESP_BLE_SEC_ENCRYPT); }
void BLEClientBase::disconnect() {
if (this->state_ == espbt::ClientState::IDLE || this->state_ == espbt::ClientState::DISCONNECTING) {
ESP_LOGI(TAG, "[%d] [%s] Disconnect requested, but already %s", this->connection_index_, this->address_str_.c_str(),
espbt::client_state_to_string(this->state_));
return;
}
if (this->state_ == espbt::ClientState::CONNECTING || this->conn_id_ == UNSET_CONN_ID) {
this->log_warning_("Disconnect before connected, disconnect scheduled.");
this->want_disconnect_ = true;
return;
}
this->unconditional_disconnect();
}
void BLEClientBase::unconditional_disconnect() {
// Disconnect without checking the state.
ESP_LOGI(TAG, "[%d] [%s] Disconnecting (conn_id: %d).", this->connection_index_, this->address_str_.c_str(),
this->conn_id_);
if (this->state_ == espbt::ClientState::DISCONNECTING) {
this->log_error_("Already disconnecting");
return;
}
if (this->conn_id_ == UNSET_CONN_ID) {
this->log_error_("conn id unset, cannot disconnect");
return;
}
auto err = esp_ble_gattc_close(this->gattc_if_, this->conn_id_);
if (err != ESP_OK) {
//
// This is a fatal error, but we can't do anything about it
// and it likely means the BLE stack is in a bad state.
//
// In the future we might consider App.reboot() here since
// the BLE stack is in an indeterminate state.
//
this->log_gattc_warning_("esp_ble_gattc_close", err);
}
if (this->state_ == espbt::ClientState::SEARCHING || this->state_ == espbt::ClientState::READY_TO_CONNECT ||
this->state_ == espbt::ClientState::DISCOVERED) {
this->set_address(0);
this->set_state(espbt::ClientState::IDLE);
} else {
this->set_state(espbt::ClientState::DISCONNECTING);
}
}
void BLEClientBase::release_services() {
#ifdef USE_ESP32_BLE_DEVICE
for (auto &svc : this->services_)
delete svc; // NOLINT(cppcoreguidelines-owning-memory)
this->services_.clear();
#endif
#ifndef CONFIG_BT_GATTC_CACHE_NVS_FLASH
esp_ble_gattc_cache_clean(this->remote_bda_);
#endif
}
void BLEClientBase::log_event_(const char *name) {
ESP_LOGD(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), name);
}
void BLEClientBase::log_gattc_event_(const char *name) {
ESP_LOGD(TAG, "[%d] [%s] ESP_GATTC_%s_EVT", this->connection_index_, this->address_str_.c_str(), name);
}
void BLEClientBase::log_gattc_warning_(const char *operation, esp_gatt_status_t status) {
ESP_LOGW(TAG, "[%d] [%s] %s error, status=%d", this->connection_index_, this->address_str_.c_str(), operation,
status);
}
void BLEClientBase::log_gattc_warning_(const char *operation, esp_err_t err) {
ESP_LOGW(TAG, "[%d] [%s] %s error, status=%d", this->connection_index_, this->address_str_.c_str(), operation, err);
}
void BLEClientBase::log_connection_params_(const char *param_type) {
ESP_LOGD(TAG, "[%d] [%s] %s conn params", this->connection_index_, this->address_str_.c_str(), param_type);
}
void BLEClientBase::log_error_(const char *message) {
ESP_LOGE(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
}
void BLEClientBase::log_error_(const char *message, int code) {
ESP_LOGE(TAG, "[%d] [%s] %s=%d", this->connection_index_, this->address_str_.c_str(), message, code);
}
void BLEClientBase::log_warning_(const char *message) {
ESP_LOGW(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
}
void BLEClientBase::set_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency, uint16_t timeout,
const char *param_type) {
esp_ble_conn_update_params_t conn_params = {{0}};
memcpy(conn_params.bda, this->remote_bda_, sizeof(esp_bd_addr_t));
conn_params.min_int = min_interval;
conn_params.max_int = max_interval;
conn_params.latency = latency;
conn_params.timeout = timeout;
this->log_connection_params_(param_type);
esp_err_t err = esp_ble_gap_update_conn_params(&conn_params);
if (err != ESP_OK) {
this->log_gattc_warning_("esp_ble_gap_update_conn_params", err);
}
}
void BLEClientBase::set_fast_conn_params_() {
// Switch to fast connection parameters for service discovery
// This improves discovery speed for devices with short timeouts
this->set_conn_params_(FAST_MIN_CONN_INTERVAL, FAST_MAX_CONN_INTERVAL, 0, FAST_CONN_TIMEOUT, "fast");
}
void BLEClientBase::set_medium_conn_params_() {
// Set medium connection parameters for balanced performance
// This balances performance with bandwidth usage for normal operation
this->set_conn_params_(MEDIUM_MIN_CONN_INTERVAL, MEDIUM_MAX_CONN_INTERVAL, 0, MEDIUM_CONN_TIMEOUT, "medium");
}
bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t esp_gattc_if,
esp_ble_gattc_cb_param_t *param) {
if (event == ESP_GATTC_REG_EVT && this->app_id != param->reg.app_id)
return false;
if (event != ESP_GATTC_REG_EVT && esp_gattc_if != ESP_GATT_IF_NONE && esp_gattc_if != this->gattc_if_)
return false;
ESP_LOGV(TAG, "[%d] [%s] gattc_event_handler: event=%d gattc_if=%d", this->connection_index_,
this->address_str_.c_str(), event, esp_gattc_if);
switch (event) {
case ESP_GATTC_REG_EVT: {
if (param->reg.status == ESP_GATT_OK) {
ESP_LOGV(TAG, "[%d] [%s] gattc registered app id %d", this->connection_index_, this->address_str_.c_str(),
this->app_id);
this->gattc_if_ = esp_gattc_if;
} else {
this->log_error_("gattc app registration failed status", param->reg.status);
this->status_ = param->reg.status;
this->mark_failed();
}
break;
}
case ESP_GATTC_OPEN_EVT: {
if (!this->check_addr(param->open.remote_bda))
return false;
this->log_gattc_event_("OPEN");
// conn_id was already set in ESP_GATTC_CONNECT_EVT
this->service_count_ = 0;
if (this->state_ != espbt::ClientState::CONNECTING) {
// This should not happen but lets log it in case it does
// because it means we have a bad assumption about how the
// ESP BT stack works.
this->log_error_("ESP_GATTC_OPEN_EVT wrong state status", param->open.status);
}
if (param->open.status != ESP_GATT_OK && param->open.status != ESP_GATT_ALREADY_OPEN) {
this->log_gattc_warning_("Connection open", param->open.status);
this->set_state(espbt::ClientState::IDLE);
break;
}
if (this->want_disconnect_) {
// Disconnect was requested after connecting started,
// but before the connection was established. Now that we have
// this->conn_id_ set, we can disconnect it.
this->unconditional_disconnect();
this->conn_id_ = UNSET_CONN_ID;
break;
}
// MTU negotiation already started in ESP_GATTC_CONNECT_EVT
this->set_state(espbt::ClientState::CONNECTED);
ESP_LOGI(TAG, "[%d] [%s] Connection open", this->connection_index_, this->address_str_.c_str());
if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
// Cached connections use medium connection parameters
this->set_medium_conn_params_();
// only set our state, subclients might have more stuff to do yet.
this->state_ = espbt::ClientState::ESTABLISHED;
break;
}
// For V3_WITHOUT_CACHE, switch to fast params for service discovery
// Service discovery period is critical - we typically have only 10s to complete
// discovery before the device disconnects us. Fast connection parameters are
// essential to finish service resolution in time and avoid retry loops.
else if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
this->set_fast_conn_params_();
}
this->log_event_("Searching for services");
esp_ble_gattc_search_service(esp_gattc_if, param->cfg_mtu.conn_id, nullptr);
break;
}
case ESP_GATTC_CONNECT_EVT: {
if (!this->check_addr(param->connect.remote_bda))
return false;
this->log_gattc_event_("CONNECT");
this->conn_id_ = param->connect.conn_id;
// Start MTU negotiation immediately as recommended by ESP-IDF examples
// (gatt_client, ble_throughput) which call esp_ble_gattc_send_mtu_req in
// ESP_GATTC_CONNECT_EVT instead of waiting for ESP_GATTC_OPEN_EVT.
// This saves ~3ms in the connection process.
auto ret = esp_ble_gattc_send_mtu_req(this->gattc_if_, param->connect.conn_id);
if (ret) {
this->log_gattc_warning_("esp_ble_gattc_send_mtu_req", ret);
}
break;
}
case ESP_GATTC_DISCONNECT_EVT: {
if (!this->check_addr(param->disconnect.remote_bda))
return false;
// Check if we were disconnected while waiting for service discovery
if (param->disconnect.reason == ESP_GATT_CONN_TERMINATE_PEER_USER &&
this->state_ == espbt::ClientState::CONNECTED) {
this->log_warning_("Remote closed during discovery");
} else {
ESP_LOGD(TAG, "[%d] [%s] ESP_GATTC_DISCONNECT_EVT, reason 0x%02x", this->connection_index_,
this->address_str_.c_str(), param->disconnect.reason);
}
this->release_services();
this->set_state(espbt::ClientState::IDLE);
break;
}
case ESP_GATTC_CFG_MTU_EVT: {
if (this->conn_id_ != param->cfg_mtu.conn_id)
return false;
if (param->cfg_mtu.status != ESP_GATT_OK) {
ESP_LOGW(TAG, "[%d] [%s] cfg_mtu failed, mtu %d, status %d", this->connection_index_,
this->address_str_.c_str(), param->cfg_mtu.mtu, param->cfg_mtu.status);
// No state change required here - disconnect event will follow if needed.
break;
}
ESP_LOGD(TAG, "[%d] [%s] cfg_mtu status %d, mtu %d", this->connection_index_, this->address_str_.c_str(),
param->cfg_mtu.status, param->cfg_mtu.mtu);
this->mtu_ = param->cfg_mtu.mtu;
break;
}
case ESP_GATTC_CLOSE_EVT: {
if (this->conn_id_ != param->close.conn_id)
return false;
this->log_gattc_event_("CLOSE");
this->release_services();
this->set_state(espbt::ClientState::IDLE);
this->conn_id_ = UNSET_CONN_ID;
break;
}
case ESP_GATTC_SEARCH_RES_EVT: {
if (this->conn_id_ != param->search_res.conn_id)
return false;
this->service_count_++;
if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
// V3 clients don't need services initialized since
// as they use the ESP APIs to get services.
break;
}
#ifdef USE_ESP32_BLE_DEVICE
BLEService *ble_service = new BLEService(); // NOLINT(cppcoreguidelines-owning-memory)
ble_service->uuid = espbt::ESPBTUUID::from_uuid(param->search_res.srvc_id.uuid);
ble_service->start_handle = param->search_res.start_handle;
ble_service->end_handle = param->search_res.end_handle;
ble_service->client = this;
this->services_.push_back(ble_service);
#endif
break;
}
case ESP_GATTC_SEARCH_CMPL_EVT: {
if (this->conn_id_ != param->search_cmpl.conn_id)
return false;
this->log_gattc_event_("SEARCH_CMPL");
// For V3_WITHOUT_CACHE, switch back to medium connection parameters after service discovery
// This balances performance with bandwidth usage after the critical discovery phase
if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
this->set_medium_conn_params_();
} else if (this->connection_type_ != espbt::ConnectionType::V3_WITH_CACHE) {
#ifdef USE_ESP32_BLE_DEVICE
for (auto &svc : this->services_) {
ESP_LOGV(TAG, "[%d] [%s] Service UUID: %s", this->connection_index_, this->address_str_.c_str(),
svc->uuid.to_string().c_str());
ESP_LOGV(TAG, "[%d] [%s] start_handle: 0x%x end_handle: 0x%x", this->connection_index_,
this->address_str_.c_str(), svc->start_handle, svc->end_handle);
}
#endif
}
ESP_LOGI(TAG, "[%d] [%s] Service discovery complete", this->connection_index_, this->address_str_.c_str());
this->state_ = espbt::ClientState::ESTABLISHED;
break;
}
case ESP_GATTC_READ_DESCR_EVT: {
if (this->conn_id_ != param->write.conn_id)
return false;
this->log_gattc_event_("READ_DESCR");
break;
}
case ESP_GATTC_WRITE_DESCR_EVT: {
if (this->conn_id_ != param->write.conn_id)
return false;
this->log_gattc_event_("WRITE_DESCR");
break;
}
case ESP_GATTC_WRITE_CHAR_EVT: {
if (this->conn_id_ != param->write.conn_id)
return false;
this->log_gattc_event_("WRITE_CHAR");
break;
}
case ESP_GATTC_READ_CHAR_EVT: {
if (this->conn_id_ != param->read.conn_id)
return false;
this->log_gattc_event_("READ_CHAR");
break;
}
case ESP_GATTC_NOTIFY_EVT: {
if (this->conn_id_ != param->notify.conn_id)
return false;
this->log_gattc_event_("NOTIFY");
break;
}
case ESP_GATTC_REG_FOR_NOTIFY_EVT: {
this->log_gattc_event_("REG_FOR_NOTIFY");
if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
// Client is responsible for flipping the descriptor value
// when using the cache
break;
}
esp_gattc_descr_elem_t desc_result;
uint16_t count = 1;
esp_gatt_status_t descr_status = esp_ble_gattc_get_descr_by_char_handle(
this->gattc_if_, this->conn_id_, param->reg_for_notify.handle, NOTIFY_DESC_UUID, &desc_result, &count);
if (descr_status != ESP_GATT_OK) {
this->log_gattc_warning_("esp_ble_gattc_get_descr_by_char_handle", descr_status);
break;
}
esp_gattc_char_elem_t char_result;
esp_gatt_status_t char_status =
esp_ble_gattc_get_all_char(this->gattc_if_, this->conn_id_, param->reg_for_notify.handle,
param->reg_for_notify.handle, &char_result, &count, 0);
if (char_status != ESP_GATT_OK) {
this->log_gattc_warning_("esp_ble_gattc_get_all_char", char_status);
break;
}
/*
1 = notify
2 = indicate
*/
uint16_t notify_en = char_result.properties & ESP_GATT_CHAR_PROP_BIT_NOTIFY ? 1 : 2;
esp_err_t status =
esp_ble_gattc_write_char_descr(this->gattc_if_, this->conn_id_, desc_result.handle, sizeof(notify_en),
(uint8_t *) &notify_en, ESP_GATT_WRITE_TYPE_RSP, ESP_GATT_AUTH_REQ_NONE);
ESP_LOGD(TAG, "Wrote notify descriptor %d, properties=%d", notify_en, char_result.properties);
if (status) {
this->log_gattc_warning_("esp_ble_gattc_write_char_descr", status);
}
break;
}
default:
// ideally would check all other events for matching conn_id
ESP_LOGD(TAG, "[%d] [%s] Event %d", this->connection_index_, this->address_str_.c_str(), event);
break;
}
return true;
}
// clients can't call defer() directly since it's protected.
void BLEClientBase::run_later(std::function<void()> &&f) { // NOLINT
this->defer(std::move(f));
}
void BLEClientBase::gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) {
switch (event) {
// This event is sent by the server when it requests security
case ESP_GAP_BLE_SEC_REQ_EVT:
if (!this->check_addr(param->ble_security.auth_cmpl.bd_addr))
return;
ESP_LOGV(TAG, "[%d] [%s] ESP_GAP_BLE_SEC_REQ_EVT %x", this->connection_index_, this->address_str_.c_str(), event);
esp_ble_gap_security_rsp(param->ble_security.ble_req.bd_addr, true);
break;
// This event is sent once authentication has completed
case ESP_GAP_BLE_AUTH_CMPL_EVT:
if (!this->check_addr(param->ble_security.auth_cmpl.bd_addr))
return;
esp_bd_addr_t bd_addr;
memcpy(bd_addr, param->ble_security.auth_cmpl.bd_addr, sizeof(esp_bd_addr_t));
ESP_LOGI(TAG, "[%d] [%s] auth complete addr: %s", this->connection_index_, this->address_str_.c_str(),
format_hex(bd_addr, 6).c_str());
if (!param->ble_security.auth_cmpl.success) {
this->log_error_("auth fail reason", param->ble_security.auth_cmpl.fail_reason);
} else {
this->paired_ = true;
ESP_LOGD(TAG, "[%d] [%s] auth success type = %d mode = %d", this->connection_index_, this->address_str_.c_str(),
param->ble_security.auth_cmpl.addr_type, param->ble_security.auth_cmpl.auth_mode);
}
break;
// There are other events we'll want to implement at some point to support things like pass key
// https://github.com/espressif/esp-idf/blob/cba69dd088344ed9d26739f04736ae7a37541b3a/examples/bluetooth/bluedroid/ble/gatt_security_client/tutorial/Gatt_Security_Client_Example_Walkthrough.md
default:
break;
}
}
// Parse GATT values into a float for a sensor.
// Ref: https://www.bluetooth.com/specifications/assigned-numbers/format-types/
float BLEClientBase::parse_char_value(uint8_t *value, uint16_t length) {
// A length of one means a single octet value.
if (length == 0)
return 0;
if (length == 1)
return (float) ((uint8_t) value[0]);
switch (value[0]) {
case 0x1: // boolean.
case 0x2: // 2bit.
case 0x3: // nibble.
case 0x4: // uint8.
return (float) ((uint8_t) value[1]);
case 0x5: // uint12.
case 0x6: // uint16.
if (length > 2) {
return (float) encode_uint16(value[1], value[2]);
}
[[fallthrough]];
case 0x7: // uint24.
if (length > 3) {
return (float) encode_uint24(value[1], value[2], value[3]);
}
[[fallthrough]];
case 0x8: // uint32.
if (length > 4) {
return (float) encode_uint32(value[1], value[2], value[3], value[4]);
}
[[fallthrough]];
case 0xC: // int8.
return (float) ((int8_t) value[1]);
case 0xD: // int12.
case 0xE: // int16.
if (length > 2) {
return (float) ((int16_t) (value[1] << 8) + (int16_t) value[2]);
}
[[fallthrough]];
case 0xF: // int24.
if (length > 3) {
return (float) ((int32_t) (value[1] << 16) + (int32_t) (value[2] << 8) + (int32_t) (value[3]));
}
[[fallthrough]];
case 0x10: // int32.
if (length > 4) {
return (float) ((int32_t) (value[1] << 24) + (int32_t) (value[2] << 16) + (int32_t) (value[3] << 8) +
(int32_t) (value[4]));
}
}
ESP_LOGW(TAG, "[%d] [%s] Cannot parse characteristic value of type 0x%x length %d", this->connection_index_,
this->address_str_.c_str(), value[0], length);
return NAN;
}
#ifdef USE_ESP32_BLE_DEVICE
BLEService *BLEClientBase::get_service(espbt::ESPBTUUID uuid) {
for (auto *svc : this->services_) {
if (svc->uuid == uuid)
return svc;
}
return nullptr;
}
BLEService *BLEClientBase::get_service(uint16_t uuid) { return this->get_service(espbt::ESPBTUUID::from_uint16(uuid)); }
BLECharacteristic *BLEClientBase::get_characteristic(espbt::ESPBTUUID service, espbt::ESPBTUUID chr) {
auto *svc = this->get_service(service);
if (svc == nullptr)
return nullptr;
return svc->get_characteristic(chr);
}
BLECharacteristic *BLEClientBase::get_characteristic(uint16_t service, uint16_t chr) {
return this->get_characteristic(espbt::ESPBTUUID::from_uint16(service), espbt::ESPBTUUID::from_uint16(chr));
}
BLECharacteristic *BLEClientBase::get_characteristic(uint16_t handle) {
for (auto *svc : this->services_) {
if (!svc->parsed)
svc->parse_characteristics();
for (auto *chr : svc->characteristics) {
if (chr->handle == handle)
return chr;
}
}
return nullptr;
}
BLEDescriptor *BLEClientBase::get_config_descriptor(uint16_t handle) {
auto *chr = this->get_characteristic(handle);
if (chr != nullptr) {
if (!chr->parsed)
chr->parse_descriptors();
for (auto &desc : chr->descriptors) {
if (desc->uuid.get_uuid().uuid.uuid16 == ESP_GATT_UUID_CHAR_CLIENT_CONFIG)
return desc;
}
}
return nullptr;
}
BLEDescriptor *BLEClientBase::get_descriptor(espbt::ESPBTUUID service, espbt::ESPBTUUID chr, espbt::ESPBTUUID descr) {
auto *svc = this->get_service(service);
if (svc == nullptr)
return nullptr;
auto *ch = svc->get_characteristic(chr);
if (ch == nullptr)
return nullptr;
return ch->get_descriptor(descr);
}
BLEDescriptor *BLEClientBase::get_descriptor(uint16_t service, uint16_t chr, uint16_t descr) {
return this->get_descriptor(espbt::ESPBTUUID::from_uint16(service), espbt::ESPBTUUID::from_uint16(chr),
espbt::ESPBTUUID::from_uint16(descr));
}
BLEDescriptor *BLEClientBase::get_descriptor(uint16_t handle) {
for (auto *svc : this->services_) {
if (!svc->parsed)
svc->parse_characteristics();
for (auto *chr : svc->characteristics) {
if (!chr->parsed)
chr->parse_descriptors();
for (auto *desc : chr->descriptors) {
if (desc->handle == handle)
return desc;
}
}
}
return nullptr;
}
#endif // USE_ESP32_BLE_DEVICE
} // namespace esphome::esp32_ble_client
#endif // USE_ESP32
Reference in New Issue View Git Blame Copy Permalink