esphome/esphome/components/pid/pid_climate.cpp

#include "pid_climate.h"
#include "esphome/core/log.h"

namespace esphome {
namespace pid {

static const char *const TAG = "pid.climate";

void PIDClimate::setup() {
  this->sensor_->add_on_state_callback([this](float state) {
    // only publish if state/current temperature has changed in two digits of precision
    this->do_publish_ = roundf(state * 100) != roundf(this->current_temperature * 100);
    this->current_temperature = state;
    this->update_pid_();
  });
  this->current_temperature = this->sensor_->state;
  // restore set points
  auto restore = this->restore_state_();
  if (restore.has_value()) {
    restore->to_call(this).perform();
  } else {
    // restore from defaults, change_away handles those for us
    if (supports_heat_() && supports_cool_()) {
      this->mode = climate::CLIMATE_MODE_HEAT_COOL;
    } else if (supports_cool_()) {
      this->mode = climate::CLIMATE_MODE_COOL;
    } else if (supports_heat_()) {
      this->mode = climate::CLIMATE_MODE_HEAT;
    }
    this->target_temperature = this->default_target_temperature_;
  }
}
void PIDClimate::control(const climate::ClimateCall &call) {
  if (call.get_mode().has_value())
    this->mode = *call.get_mode();
  if (call.get_target_temperature().has_value())
    this->target_temperature = *call.get_target_temperature();

  // If switching to off mode, set output immediately
  if (this->mode == climate::CLIMATE_MODE_OFF)
    this->write_output_(0.0f);

  this->publish_state();
}
climate::ClimateTraits PIDClimate::traits() {
  auto traits = climate::ClimateTraits();
  traits.set_supports_current_temperature(true);
  traits.set_supports_two_point_target_temperature(false);

  traits.set_supported_modes({climate::CLIMATE_MODE_OFF});
  if (supports_cool_())
    traits.add_supported_mode(climate::CLIMATE_MODE_COOL);
  if (supports_heat_())
    traits.add_supported_mode(climate::CLIMATE_MODE_HEAT);
  if (supports_heat_() && supports_cool_())
    traits.add_supported_mode(climate::CLIMATE_MODE_HEAT_COOL);

  traits.set_supports_action(true);
  return traits;
}
void PIDClimate::dump_config() {
  LOG_CLIMATE("", "PID Climate", this);
  ESP_LOGCONFIG(TAG, "  Control Parameters:");
  ESP_LOGCONFIG(TAG, "    kp: %.5f, ki: %.5f, kd: %.5f", controller_.kp, controller_.ki, controller_.kd);

  if (this->autotuner_ != nullptr) {
    this->autotuner_->dump_config();
  }
}
void PIDClimate::write_output_(float value) {
  this->output_value_ = value;

  // first ensure outputs are off (both outputs not active at the same time)
  if (this->supports_cool_() && value >= 0)
    this->cool_output_->set_level(0.0f);
  if (this->supports_heat_() && value <= 0)
    this->heat_output_->set_level(0.0f);

  // value < 0 means cool, > 0 means heat
  if (this->supports_cool_() && value < 0)
    this->cool_output_->set_level(std::min(1.0f, -value));
  if (this->supports_heat_() && value > 0)
    this->heat_output_->set_level(std::min(1.0f, value));

  // Update action variable for user feedback what's happening
  climate::ClimateAction new_action;
  if (this->supports_cool_() && value < 0) {
    new_action = climate::CLIMATE_ACTION_COOLING;
  } else if (this->supports_heat_() && value > 0) {
    new_action = climate::CLIMATE_ACTION_HEATING;
  } else if (this->mode == climate::CLIMATE_MODE_OFF) {
    new_action = climate::CLIMATE_ACTION_OFF;
  } else {
    new_action = climate::CLIMATE_ACTION_IDLE;
  }

  if (new_action != this->action) {
    this->action = new_action;
    this->do_publish_ = true;
  }
  this->pid_computed_callback_.call();
}
void PIDClimate::update_pid_() {
  float value;
  if (std::isnan(this->current_temperature) || std::isnan(this->target_temperature)) {
    // if any control parameters are nan, turn off all outputs
    value = 0.0;
  } else {
    // Update PID controller irrespective of current mode, to not mess up D/I terms
    // In non-auto mode, we just discard the output value
    value = this->controller_.update(this->target_temperature, this->current_temperature);

    // Check autotuner
    if (this->autotuner_ != nullptr && !this->autotuner_->is_finished()) {
      auto res = this->autotuner_->update(this->target_temperature, this->current_temperature);
      if (res.result_params.has_value()) {
        this->controller_.kp = res.result_params->kp;
        this->controller_.ki = res.result_params->ki;
        this->controller_.kd = res.result_params->kd;
        // keep autotuner instance so that subsequent dump_configs will print the long result message.
      } else {
        value = res.output;
        if (mode != climate::CLIMATE_MODE_HEAT_COOL) {
          ESP_LOGW(TAG, "For PID autotuner you need to set AUTO (also called heat/cool) mode!");
        }
      }
    }
  }

  if (this->mode == climate::CLIMATE_MODE_OFF) {
    this->write_output_(0.0);
  } else {
    this->write_output_(value);
  }

  if (this->do_publish_)
    this->publish_state();
}
void PIDClimate::start_autotune(std::unique_ptr<PIDAutotuner> &&autotune) {
  this->autotuner_ = std::move(autotune);
  float min_value = this->supports_cool_() ? -1.0f : 0.0f;
  float max_value = this->supports_heat_() ? 1.0f : 0.0f;
  this->autotuner_->config(min_value, max_value);
  this->set_interval("autotune-progress", 10000, [this]() {
    if (this->autotuner_ != nullptr && !this->autotuner_->is_finished())
      this->autotuner_->dump_config();
  });
}

void PIDClimate::reset_integral_term() { this->controller_.reset_accumulated_integral(); }

}  // namespace pid
}  // namespace esphome