Revert "json keys"

This reverts commit ae3f4ad919.

.ai/instructions.md

@@ -9,7 +9,7 @@ This document provides essential context for AI models interacting with this pro
 
 ## 2. Core Technologies & Stack
 
-*   **Languages:** Python (>=3.10), C++ (gnu++20)
+*   **Languages:** Python (>=3.11), C++ (gnu++20)
 *   **Frameworks & Runtimes:** PlatformIO, Arduino, ESP-IDF.
 *   **Build Systems:** PlatformIO is the primary build system. CMake is used as an alternative.
 *   **Configuration:** YAML.
@@ -38,7 +38,7 @@ This document provides essential context for AI models interacting with this pro
     5.  **Dashboard** (`esphome/dashboard/`): A web-based interface for device configuration, management, and OTA updates.
 
 *   **Platform Support:**
-    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (S2, S3, C3, etc.) and both IDF and Arduino frameworks.
+    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (Original, C2, C3, C5, C6, H2, P4, S2, S3) with ESP-IDF framework. Arduino framework supports only a subset of the variants (Original, C3, S2, S3).
     2.  **ESP8266** (`components/esp8266/`): Espressif ESP8266. Arduino framework only, with memory constraints.
     3.  **RP2040** (`components/rp2040/`): Raspberry Pi Pico/RP2040. Arduino framework with PIO (Programmable I/O) support.
     4.  **LibreTiny** (`components/libretiny/`): Realtek and Beken chips. Supports multiple chip families and auto-generated components.
@@ -60,7 +60,7 @@ This document provides essential context for AI models interacting with this pro
         ├── __init__.py          # Component configuration schema and code generation
         ├── [component].h        # C++ header file (if needed)
         ├── [component].cpp      # C++ implementation (if needed)
-        └── [platform]/         # Platform-specific implementations
+        └── [platform]/          # Platform-specific implementations
             ├── __init__.py      # Platform-specific configuration
             ├── [platform].h     # Platform C++ header
             └── [platform].cpp   # Platform C++ implementation
@@ -150,7 +150,8 @@ This document provides essential context for AI models interacting with this pro
 *   **Configuration Validation:**
     *   **Common Validators:** `cv.int_`, `cv.float_`, `cv.string`, `cv.boolean`, `cv.int_range(min=0, max=100)`, `cv.positive_int`, `cv.percentage`.
     *   **Complex Validation:** `cv.All(cv.string, cv.Length(min=1, max=50))`, `cv.Any(cv.int_, cv.string)`.
-    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `cv.only_with_arduino`.
+    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `esp32.only_on_variant(...)`, `cv.only_on_esp32`, `cv.only_on_esp8266`, `cv.only_on_rp2040`.
+    *   **Framework-Specific:** `cv.only_with_framework(...)`, `cv.only_with_arduino`, `cv.only_with_esp_idf`.
     *   **Schema Extensions:**
         ```python
         CONFIG_SCHEMA = cv.Schema({ ... })

.clang-tidy.hash

@@ -1 +1 @@
-6af8b429b94191fe8e239fcb3b73f7982d0266cb5b05ffbc81edaeac1bc8c273
+4368db58e8f884aff245996b1e8b644cc0796c0bb2fa706d5740d40b823d3ac9

.github/actions/restore-python/action.yml

@@ -17,7 +17,7 @@ runs:
   steps:
     - name: Set up Python ${{ inputs.python-version }}
       id: python
-      uses: actions/setup-python@v5.6.0
+      uses: actions/setup-python@v6.0.0
       with:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment

.github/workflows/auto-label-pr.yml

@@ -32,7 +32,7 @@ jobs:
           private-key: ${{ secrets.ESPHOME_GITHUB_APP_PRIVATE_KEY }}
 
       - name: Auto Label PR
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ steps.generate-token.outputs.token }}
           script: |
@@ -105,7 +105,9 @@ jobs:
 
             // Calculate data from PR files
             const changedFiles = prFiles.map(file => file.filename);
-            const totalChanges = prFiles.reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
+            const totalAdditions = prFiles.reduce((sum, file) => sum + (file.additions || 0), 0);
+            const totalDeletions = prFiles.reduce((sum, file) => sum + (file.deletions || 0), 0);
+            const totalChanges = totalAdditions + totalDeletions;
 
             console.log('Current labels:', currentLabels.join(', '));
             console.log('Changed files:', changedFiles.length);
@@ -231,16 +233,21 @@ jobs:
             // Strategy: PR size detection
             async function detectPRSize() {
               const labels = new Set();
-              const testChanges = prFiles
-                .filter(file => file.filename.startsWith('tests/'))
-                .reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
-
-              const nonTestChanges = totalChanges - testChanges;
 
               if (totalChanges <= SMALL_PR_THRESHOLD) {
                 labels.add('small-pr');
+                return labels;
               }
 
+              const testAdditions = prFiles
+                .filter(file => file.filename.startsWith('tests/'))
+                .reduce((sum, file) => sum + (file.additions || 0), 0);
+              const testDeletions = prFiles
+                .filter(file => file.filename.startsWith('tests/'))
+                .reduce((sum, file) => sum + (file.deletions || 0), 0);
+
+              const nonTestChanges = (totalAdditions - testAdditions) - (totalDeletions - testDeletions);
+
               // Don't add too-big if mega-pr label is already present
               if (nonTestChanges > TOO_BIG_THRESHOLD && !isMegaPR) {
                 labels.add('too-big');
@@ -375,7 +382,7 @@ jobs:
               const labels = new Set();
 
               // Check for missing tests
-              if ((allLabels.has('new-component') || allLabels.has('new-platform')) && !allLabels.has('has-tests')) {
+              if ((allLabels.has('new-component') || allLabels.has('new-platform') || allLabels.has('new-feature')) && !allLabels.has('has-tests')) {
                 labels.add('needs-tests');
               }
 
@@ -412,10 +419,13 @@ jobs:
 
               // Too big message
               if (finalLabels.includes('too-big')) {
-                const testChanges = prFiles
+                const testAdditions = prFiles
                   .filter(file => file.filename.startsWith('tests/'))
-                  .reduce((sum, file) => sum + (file.additions || 0) + (file.deletions || 0), 0);
-                const nonTestChanges = totalChanges - testChanges;
+                  .reduce((sum, file) => sum + (file.additions || 0), 0);
+                const testDeletions = prFiles
+                  .filter(file => file.filename.startsWith('tests/'))
+                  .reduce((sum, file) => sum + (file.deletions || 0), 0);
+                const nonTestChanges = (totalAdditions - testAdditions) - (totalDeletions - testDeletions);
 
                 const tooManyLabels = finalLabels.length > MAX_LABELS;
                 const tooManyChanges = nonTestChanges > TOO_BIG_THRESHOLD;

.github/workflows/ci-api-proto.yml

@@ -23,7 +23,7 @@ jobs:
       - name: Checkout
         uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -47,7 +47,7 @@ jobs:
           fi
       - if: failure()
         name: Review PR
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             await github.rest.pulls.createReview({
@@ -70,7 +70,7 @@ jobs:
             esphome/components/api/api_pb2_service.*
       - if: success()
         name: Dismiss review
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             let reviews = await github.rest.pulls.listReviews({

.github/workflows/ci-clang-tidy-hash.yml

@@ -23,7 +23,7 @@ jobs:
         uses: actions/checkout@v5.0.0
 
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -41,7 +41,7 @@ jobs:
 
       - if: failure()
         name: Request changes
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             await github.rest.pulls.createReview({
@@ -54,7 +54,7 @@ jobs:
 
       - if: success()
         name: Dismiss review
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             let reviews = await github.rest.pulls.listReviews({

.github/workflows/ci-docker.yml

@@ -45,7 +45,7 @@ jobs:
     steps:
       - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
       - name: Set up Docker Buildx

.github/workflows/ci.yml

@@ -42,7 +42,7 @@ jobs:
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_test.txt', '.pre-commit-config.yaml') }}" >> $GITHUB_OUTPUT
       - name: Set up Python ${{ env.DEFAULT_PYTHON }}
         id: python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
@@ -156,7 +156,7 @@ jobs:
           . venv/bin/activate
           pytest -vv --cov-report=xml --tb=native -n auto tests --ignore=tests/integration/
       - name: Upload coverage to Codecov
-        uses: codecov/codecov-action@v5.4.3
+        uses: codecov/codecov-action@v5.5.1
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
       - name: Save Python virtual environment cache
@@ -217,7 +217,7 @@ jobs:
         uses: actions/checkout@v5.0.0
       - name: Set up Python 3.13
         id: python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.13"
       - name: Restore Python virtual environment

.github/workflows/codeowner-review-request.yml

@@ -25,7 +25,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Request reviews from component codeowners
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             const owner = context.repo.owner;

.github/workflows/external-component-bot.yml

@@ -15,7 +15,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Add external component comment
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           script: |

.github/workflows/issue-codeowner-notify.yml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Notify codeowners for component issues
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           script: |
             const owner = context.repo.owner;

.github/workflows/needs-docs.yml

@@ -1,24 +0,0 @@
-name: Needs Docs
-
-on:
-  pull_request:
-    types: [labeled, unlabeled]
-
-jobs:
-  check:
-    name: Check
-    runs-on: ubuntu-latest
-    steps:
-      - name: Check for needs-docs label
-        uses: actions/github-script@v7.0.1
-        with:
-          script: |
-            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              issue_number: context.issue.number
-            });
-            const needsDocs = labels.find(label => label.name === 'needs-docs');
-            if (needsDocs) {
-              core.setFailed('Pull request needs docs');
-            }

.github/workflows/release.yml

@@ -62,7 +62,7 @@ jobs:
     steps:
       - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.x"
       - name: Build
@@ -70,7 +70,7 @@ jobs:
           pip3 install build
           python3 -m build
       - name: Publish
-        uses: pypa/gh-action-pypi-publish@v1.12.4
+        uses: pypa/gh-action-pypi-publish@v1.13.0
         with:
           skip-existing: true
 
@@ -94,7 +94,7 @@ jobs:
     steps:
       - uses: actions/checkout@v5.0.0
       - name: Set up Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: "3.11"
 
@@ -220,7 +220,7 @@ jobs:
       - deploy-manifest
     steps:
       - name: Trigger Workflow
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.DEPLOY_HA_ADDON_REPO_TOKEN }}
           script: |
@@ -246,7 +246,7 @@ jobs:
     environment: ${{ needs.init.outputs.deploy_env }}
     steps:
       - name: Trigger Workflow
-        uses: actions/github-script@v7.0.1
+        uses: actions/github-script@v8.0.0
         with:
           github-token: ${{ secrets.DEPLOY_ESPHOME_SCHEMA_REPO_TOKEN }}
           script: |

.github/workflows/stale.yml

@@ -17,7 +17,7 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v9.1.0
+      - uses: actions/stale@v10.0.0
         with:
           days-before-pr-stale: 90
           days-before-pr-close: 7
@@ -37,7 +37,7 @@ jobs:
   close-issues:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v9.1.0
+      - uses: actions/stale@v10.0.0
         with:
           days-before-pr-stale: -1
           days-before-pr-close: -1

.github/workflows/status-check-labels.yml

@@ -0,0 +1,30 @@
+name: Status check labels
+
+on:
+  pull_request:
+    types: [labeled, unlabeled]
+
+jobs:
+  check:
+    name: Check ${{ matrix.label }}
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        label:
+          - needs-docs
+          - merge-after-release
+    steps:
+      - name: Check for ${{ matrix.label }} label
+        uses: actions/github-script@v8.0.0
+        with:
+          script: |
+            const { data: labels } = await github.rest.issues.listLabelsOnIssue({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: context.issue.number
+            });
+            const hasLabel = labels.find(label => label.name === '${{ matrix.label }}');
+            if (hasLabel) {
+              core.setFailed('Pull request cannot be merged, it is labeled as ${{ matrix.label }}');
+            }

.github/workflows/sync-device-classes.yml

@@ -22,7 +22,7 @@ jobs:
           path: lib/home-assistant
 
       - name: Setup Python
-        uses: actions/setup-python@v5.6.0
+        uses: actions/setup-python@v6.0.0
         with:
           python-version: 3.13
 

.pre-commit-config.yaml

@@ -11,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.12.8
+    rev: v0.12.12
     hooks:
       # Run the linter.
       - id: ruff

CODEOWNERS

@@ -89,6 +89,7 @@ esphome/components/bp5758d/* @Cossid
 esphome/components/button/* @esphome/core
 esphome/components/bytebuffer/* @clydebarrow
 esphome/components/camera/* @DT-art1 @bdraco
+esphome/components/camera_encoder/* @DT-art1
 esphome/components/canbus/* @danielschramm @mvturnho
 esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @esphome/core

Doxyfile

@@ -48,7 +48,7 @@ PROJECT_NAME           = ESPHome
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 2025.8.0-dev
+PROJECT_NUMBER         = 2025.9.0-dev
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a

esphome/__main__.py

@@ -132,14 +132,17 @@ def choose_upload_log_host(
                 ]
                 resolved.append(choose_prompt(options, purpose=purpose))
             elif device == "OTA":
-                if (show_ota and "ota" in CORE.config) or (
-                    show_api and "api" in CORE.config
+                if CORE.address and (
+                    (show_ota and "ota" in CORE.config)
+                    or (show_api and "api" in CORE.config)
                 ):
                     resolved.append(CORE.address)
                 elif show_mqtt and has_mqtt_logging():
                     resolved.append("MQTT")
             else:
                 resolved.append(device)
+        if not resolved:
+            _LOGGER.error("All specified devices: %s could not be resolved.", defaults)
         return resolved
 
     # No devices specified, show interactive chooser
@@ -476,7 +479,7 @@ def show_logs(config: ConfigType, args: ArgsProtocol, devices: list[str]) -> int
         from esphome.components.api.client import run_logs
 
         return run_logs(config, addresses_to_use)
-    if get_port_type(port) == "MQTT" and "mqtt" in config:
+    if get_port_type(port) in ("NETWORK", "MQTT") and "mqtt" in config:
         from esphome import mqtt
 
         return mqtt.show_logs(

esphome/components/absolute_humidity/absolute_humidity.cpp

@@ -61,11 +61,10 @@ void AbsoluteHumidityComponent::loop() {
       ESP_LOGW(TAG, "No valid state from temperature sensor!");
     }
     if (no_humidity) {
-      ESP_LOGW(TAG, "No valid state from temperature sensor!");
+      ESP_LOGW(TAG, "No valid state from humidity sensor!");
     }
-    ESP_LOGW(TAG, "Unable to calculate absolute humidity.");
     this->publish_state(NAN);
-    this->status_set_warning();
+    this->status_set_warning("Unable to calculate absolute humidity.");
     return;
   }
 
@@ -87,9 +86,8 @@ void AbsoluteHumidityComponent::loop() {
       es = es_wobus(temperature_c);
       break;
     default:
-      ESP_LOGE(TAG, "Invalid saturation vapor pressure equation selection!");
       this->publish_state(NAN);
-      this->status_set_error();
+      this->status_set_error("Invalid saturation vapor pressure equation selection!");
       return;
   }
   ESP_LOGD(TAG, "Saturation vapor pressure %f kPa", es);

esphome/components/ags10/ags10.cpp

@@ -89,7 +89,7 @@ void AGS10Component::dump_config() {
 bool AGS10Component::new_i2c_address(uint8_t newaddress) {
   uint8_t rev_newaddress = ~newaddress;
   std::array<uint8_t, 5> data{newaddress, rev_newaddress, newaddress, rev_newaddress, 0};
-  data[4] = calc_crc8_(data, 4);
+  data[4] = crc8(data.data(), 4, 0xFF, 0x31, true);
   if (!this->write_bytes(REG_ADDRESS, data)) {
     this->error_code_ = COMMUNICATION_FAILED;
     this->status_set_warning();
@@ -109,7 +109,7 @@ bool AGS10Component::set_zero_point_with_current_resistance() { return this->set
 
 bool AGS10Component::set_zero_point_with(uint16_t value) {
   std::array<uint8_t, 5> data{0x00, 0x0C, (uint8_t) ((value >> 8) & 0xFF), (uint8_t) (value & 0xFF), 0};
-  data[4] = calc_crc8_(data, 4);
+  data[4] = crc8(data.data(), 4, 0xFF, 0x31, true);
   if (!this->write_bytes(REG_CALIBRATION, data)) {
     this->error_code_ = COMMUNICATION_FAILED;
     this->status_set_warning();
@@ -184,7 +184,7 @@ template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_che
   auto res = *data;
   auto crc_byte = res[len];
 
-  if (crc_byte != calc_crc8_(res, len)) {
+  if (crc_byte != crc8(res.data(), len, 0xFF, 0x31, true)) {
     this->error_code_ = CRC_CHECK_FAILED;
     ESP_LOGE(TAG, "Reading AGS10 version failed: crc error!");
     return optional<std::array<uint8_t, N>>();
@@ -192,20 +192,5 @@ template<size_t N> optional<std::array<uint8_t, N>> AGS10Component::read_and_che
 
   return data;
 }
-
-template<size_t N> uint8_t AGS10Component::calc_crc8_(std::array<uint8_t, N> dat, uint8_t num) {
-  uint8_t i, byte1, crc = 0xFF;
-  for (byte1 = 0; byte1 < num; byte1++) {
-    crc ^= (dat[byte1]);
-    for (i = 0; i < 8; i++) {
-      if (crc & 0x80) {
-        crc = (crc << 1) ^ 0x31;
-      } else {
-        crc = (crc << 1);
-      }
-    }
-  }
-  return crc;
-}
 }  // namespace ags10
 }  // namespace esphome

esphome/components/ags10/ags10.h

@@ -1,9 +1,9 @@
 #pragma once
 
+#include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/i2c/i2c.h"
 
 namespace esphome {
 namespace ags10 {
@@ -99,16 +99,6 @@ class AGS10Component : public PollingComponent, public i2c::I2CDevice {
    * Read, checks and returns data from the sensor.
    */
   template<size_t N> optional<std::array<uint8_t, N>> read_and_check_(uint8_t a_register);
-
-  /**
-   * Calculates CRC8 value.
-   *
-   * CRC8 calculation, initial value: 0xFF, polynomial: 0x31 (x8+ x5+ x4+1)
-   *
-   * @param[in] dat the data buffer
-   * @param num number of bytes in the buffer
-   */
-  template<size_t N> uint8_t calc_crc8_(std::array<uint8_t, N> dat, uint8_t num);
 };
 
 template<typename... Ts> class AGS10NewI2cAddressAction : public Action<Ts...>, public Parented<AGS10Component> {

esphome/components/airthings_ble/__init__.py

@@ -18,6 +18,6 @@ CONFIG_SCHEMA = cv.Schema(
 ).extend(esp32_ble_tracker.ESP_BLE_DEVICE_SCHEMA)
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
-    yield esp32_ble_tracker.register_ble_device(var, config)
+    await esp32_ble_tracker.register_ble_device(var, config)

esphome/components/alarm_control_panel/__init__.py

@@ -13,7 +13,7 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_WEB_SERVER,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -345,6 +345,6 @@ async def alarm_control_panel_is_armed_to_code(
     return cg.new_Pvariable(condition_id, template_arg, paren)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(alarm_control_panel_ns.using)

esphome/components/am2315c/am2315c.cpp

@@ -29,22 +29,6 @@ namespace am2315c {
 
 static const char *const TAG = "am2315c";
 
-uint8_t AM2315C::crc8_(uint8_t *data, uint8_t len) {
-  uint8_t crc = 0xFF;
-  while (len--) {
-    crc ^= *data++;
-    for (uint8_t i = 0; i < 8; i++) {
-      if (crc & 0x80) {
-        crc <<= 1;
-        crc ^= 0x31;
-      } else {
-        crc <<= 1;
-      }
-    }
-  }
-  return crc;
-}
-
 bool AM2315C::reset_register_(uint8_t reg) {
   //  code based on demo code sent by www.aosong.com
   //  no further documentation.
@@ -86,7 +70,7 @@ bool AM2315C::convert_(uint8_t *data, float &humidity, float &temperature) {
   humidity = raw * 9.5367431640625e-5;
   raw = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5];
   temperature = raw * 1.9073486328125e-4 - 50;
-  return this->crc8_(data, 6) == data[6];
+  return crc8(data, 6, 0xFF, 0x31, true) == data[6];
 }
 
 void AM2315C::setup() {

esphome/components/am2315c/am2315c.h

@@ -21,9 +21,9 @@
 // SOFTWARE.
 #pragma once
 
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
 #include "esphome/components/i2c/i2c.h"
+#include "esphome/components/sensor/sensor.h"
+#include "esphome/core/component.h"
 
 namespace esphome {
 namespace am2315c {
@@ -39,7 +39,6 @@ class AM2315C : public PollingComponent, public i2c::I2CDevice {
   void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }
 
  protected:
-  uint8_t crc8_(uint8_t *data, uint8_t len);
   bool convert_(uint8_t *data, float &humidity, float &temperature);
   bool reset_register_(uint8_t reg);
 

esphome/components/api/__init__.py

@@ -24,7 +24,7 @@ from esphome.const import (
     CONF_TRIGGER_ID,
     CONF_VARIABLES,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 DOMAIN = "api"
 DEPENDENCIES = ["network"]
@@ -134,7 +134,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(40.0)
+@coroutine_with_priority(CoroPriority.WEB)
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)
@@ -321,6 +321,7 @@ HOMEASSISTANT_TAG_SCANNED_ACTION_SCHEMA = cv.maybe_simple_value(
     HOMEASSISTANT_TAG_SCANNED_ACTION_SCHEMA,
 )
 async def homeassistant_tag_scanned_to_code(config, action_id, template_arg, args):
+    cg.add_define("USE_API_HOMEASSISTANT_SERVICES")
     serv = await cg.get_variable(config[CONF_ID])
     var = cg.new_Pvariable(action_id, template_arg, serv, True)
     cg.add(var.set_service("esphome.tag_scanned"))

esphome/components/api/api.proto

@@ -1712,6 +1712,7 @@ message BluetoothScannerStateResponse {
 
   BluetoothScannerState state = 1;
   BluetoothScannerMode mode = 2;
+  BluetoothScannerMode configured_mode = 3;
 }
 
 message BluetoothScannerSetModeRequest {

esphome/components/api/api_connection.cpp

@@ -289,16 +289,26 @@ uint16_t APIConnection::encode_message_to_buffer(ProtoMessage &msg, uint8_t mess
     return 0;  // Doesn't fit
   }
 
-  // Allocate buffer space - pass payload size, allocation functions add header/footer space
-  ProtoWriteBuffer buffer = is_single ? conn->allocate_single_message_buffer(calculated_size)
-                                      : conn->allocate_batch_message_buffer(calculated_size);
-
   // Get buffer size after allocation (which includes header padding)
   std::vector<uint8_t> &shared_buf = conn->parent_->get_shared_buffer_ref();
-  size_t size_before_encode = shared_buf.size();
+
+  if (is_single || conn->flags_.batch_first_message) {
+    // Single message or first batch message
+    conn->prepare_first_message_buffer(shared_buf, header_padding, total_calculated_size);
+    if (conn->flags_.batch_first_message) {
+      conn->flags_.batch_first_message = false;
+    }
+  } else {
+    // Batch message second or later
+    // Add padding for previous message footer + this message header
+    size_t current_size = shared_buf.size();
+    shared_buf.reserve(current_size + total_calculated_size);
+    shared_buf.resize(current_size + footer_size + header_padding);
+  }
 
   // Encode directly into buffer
-  msg.encode(buffer);
+  size_t size_before_encode = shared_buf.size();
+  msg.encode({&shared_buf});
 
   // Calculate actual encoded size (not including header that was already added)
   size_t actual_payload_size = shared_buf.size() - size_before_encode;
@@ -455,9 +465,7 @@ uint16_t APIConnection::try_send_light_state(EntityBase *entity, APIConnection *
   resp.cold_white = values.get_cold_white();
   resp.warm_white = values.get_warm_white();
   if (light->supports_effects()) {
-    // get_effect_name() returns temporary std::string - must store it
-    std::string effect_name = light->get_effect_name();
-    resp.set_effect(StringRef(effect_name));
+    resp.set_effect(light->get_effect_name_ref());
   }
   return fill_and_encode_entity_state(light, resp, LightStateResponse::MESSAGE_TYPE, conn, remaining_size, is_single);
 }
@@ -1415,9 +1423,7 @@ bool APIConnection::send_device_info_response(const DeviceInfoRequest &msg) {
   static constexpr auto ESPHOME_VERSION_REF = StringRef::from_lit(ESPHOME_VERSION);
   resp.set_esphome_version(ESPHOME_VERSION_REF);
 
-  // get_compilation_time() returns temporary std::string - must store it
-  std::string compilation_time = App.get_compilation_time();
-  resp.set_compilation_time(StringRef(compilation_time));
+  resp.set_compilation_time(App.get_compilation_time_ref());
 
   // Compile-time StringRef constants for manufacturers
 #if defined(USE_ESP8266) || defined(USE_ESP32)
@@ -1620,14 +1626,6 @@ bool APIConnection::schedule_batch_() {
   return true;
 }
 
-ProtoWriteBuffer APIConnection::allocate_single_message_buffer(uint16_t size) { return this->create_buffer(size); }
-
-ProtoWriteBuffer APIConnection::allocate_batch_message_buffer(uint16_t size) {
-  ProtoWriteBuffer result = this->prepare_message_buffer(size, this->flags_.batch_first_message);
-  this->flags_.batch_first_message = false;
-  return result;
-}
-
 void APIConnection::process_batch_() {
   // Ensure PacketInfo remains trivially destructible for our placement new approach
   static_assert(std::is_trivially_destructible<PacketInfo>::value,
@@ -1735,7 +1733,7 @@ void APIConnection::process_batch_() {
     }
     remaining_size -= payload_size;
     // Calculate where the next message's header padding will start
-    // Current buffer size + footer space (that prepare_message_buffer will add for this message)
+    // Current buffer size + footer space for this message
     current_offset = shared_buf.size() + footer_size;
   }
 

esphome/components/api/api_connection.h

@@ -44,7 +44,7 @@ static constexpr size_t MAX_PACKETS_PER_BATCH = 64;  // ESP32 has 8KB+ stack, HO
 static constexpr size_t MAX_PACKETS_PER_BATCH = 32;  // ESP8266/RP2040/etc have smaller stacks
 #endif
 
-class APIConnection : public APIServerConnection {
+class APIConnection final : public APIServerConnection {
  public:
   friend class APIServer;
   friend class ListEntitiesIterator;
@@ -252,44 +252,21 @@ class APIConnection : public APIServerConnection {
 
     // Get header padding size - used for both reserve and insert
     uint8_t header_padding = this->helper_->frame_header_padding();
-
     // Get shared buffer from parent server
     std::vector<uint8_t> &shared_buf = this->parent_->get_shared_buffer_ref();
+    this->prepare_first_message_buffer(shared_buf, header_padding,
+                                       reserve_size + header_padding + this->helper_->frame_footer_size());
+    return {&shared_buf};
+  }
+
+  void prepare_first_message_buffer(std::vector<uint8_t> &shared_buf, size_t header_padding, size_t total_size) {
     shared_buf.clear();
     // Reserve space for header padding + message + footer
     // - Header padding: space for protocol headers (7 bytes for Noise, 6 for Plaintext)
     // - Footer: space for MAC (16 bytes for Noise, 0 for Plaintext)
-    shared_buf.reserve(reserve_size + header_padding + this->helper_->frame_footer_size());
+    shared_buf.reserve(total_size);
     // Resize to add header padding so message encoding starts at the correct position
     shared_buf.resize(header_padding);
-    return {&shared_buf};
-  }
-
-  // Prepare buffer for next message in batch
-  ProtoWriteBuffer prepare_message_buffer(uint16_t message_size, bool is_first_message) {
-    // Get reference to shared buffer (it maintains state between batch messages)
-    std::vector<uint8_t> &shared_buf = this->parent_->get_shared_buffer_ref();
-
-    if (is_first_message) {
-      shared_buf.clear();
-    }
-
-    size_t current_size = shared_buf.size();
-
-    // Calculate padding to add:
-    // - First message: just header padding
-    // - Subsequent messages: footer for previous message + header padding for this message
-    size_t padding_to_add = is_first_message
-                                ? this->helper_->frame_header_padding()
-                                : this->helper_->frame_header_padding() + this->helper_->frame_footer_size();
-
-    // Reserve space for padding + message
-    shared_buf.reserve(current_size + padding_to_add + message_size);
-
-    // Resize to add the padding bytes
-    shared_buf.resize(current_size + padding_to_add);
-
-    return {&shared_buf};
   }
 
   bool try_to_clear_buffer(bool log_out_of_space);
@@ -297,10 +274,6 @@ class APIConnection : public APIServerConnection {
 
   std::string get_client_combined_info() const { return this->client_info_.get_combined_info(); }
 
-  // Buffer allocator methods for batch processing
-  ProtoWriteBuffer allocate_single_message_buffer(uint16_t size);
-  ProtoWriteBuffer allocate_batch_message_buffer(uint16_t size);
-
  protected:
   // Helper function to handle authentication completion
   void complete_authentication_();
@@ -328,9 +301,17 @@ class APIConnection : public APIServerConnection {
                                               APIConnection *conn, uint32_t remaining_size, bool is_single) {
     // Set common fields that are shared by all entity types
     msg.key = entity->get_object_id_hash();
-    // IMPORTANT: get_object_id() may return a temporary std::string
-    std::string object_id = entity->get_object_id();
-    msg.set_object_id(StringRef(object_id));
+    // Try to use static reference first to avoid allocation
+    StringRef static_ref = entity->get_object_id_ref_for_api_();
+    // Store dynamic string outside the if-else to maintain lifetime
+    std::string object_id;
+    if (!static_ref.empty()) {
+      msg.set_object_id(static_ref);
+    } else {
+      // Dynamic case - need to allocate
+      object_id = entity->get_object_id();
+      msg.set_object_id(StringRef(object_id));
+    }
 
     if (entity->has_own_name()) {
       msg.set_name(entity->get_name());

esphome/components/api/api_frame_helper.h

@@ -104,9 +104,9 @@ class APIFrameHelper {
   // The buffer contains all messages with appropriate padding before each
   virtual APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) = 0;
   // Get the frame header padding required by this protocol
-  virtual uint8_t frame_header_padding() = 0;
+  uint8_t frame_header_padding() const { return frame_header_padding_; }
   // Get the frame footer size required by this protocol
-  virtual uint8_t frame_footer_size() = 0;
+  uint8_t frame_footer_size() const { return frame_footer_size_; }
   // Check if socket has data ready to read
   bool is_socket_ready() const { return socket_ != nullptr && socket_->ready(); }
 

esphome/components/api/api_frame_helper_noise.h

@@ -7,7 +7,7 @@
 
 namespace esphome::api {
 
-class APINoiseFrameHelper : public APIFrameHelper {
+class APINoiseFrameHelper final : public APIFrameHelper {
  public:
   APINoiseFrameHelper(std::unique_ptr<socket::Socket> socket, std::shared_ptr<APINoiseContext> ctx,
                       const ClientInfo *client_info)
@@ -25,10 +25,6 @@ class APINoiseFrameHelper : public APIFrameHelper {
   APIError read_packet(ReadPacketBuffer *buffer) override;
   APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) override;
-  // Get the frame header padding required by this protocol
-  uint8_t frame_header_padding() override { return frame_header_padding_; }
-  // Get the frame footer size required by this protocol
-  uint8_t frame_footer_size() override { return frame_footer_size_; }
 
  protected:
   APIError state_action_();

esphome/components/api/api_frame_helper_plaintext.h

@@ -5,7 +5,7 @@
 
 namespace esphome::api {
 
-class APIPlaintextFrameHelper : public APIFrameHelper {
+class APIPlaintextFrameHelper final : public APIFrameHelper {
  public:
   APIPlaintextFrameHelper(std::unique_ptr<socket::Socket> socket, const ClientInfo *client_info)
       : APIFrameHelper(std::move(socket), client_info) {
@@ -22,9 +22,6 @@ class APIPlaintextFrameHelper : public APIFrameHelper {
   APIError read_packet(ReadPacketBuffer *buffer) override;
   APIError write_protobuf_packet(uint8_t type, ProtoWriteBuffer buffer) override;
   APIError write_protobuf_packets(ProtoWriteBuffer buffer, std::span<const PacketInfo> packets) override;
-  uint8_t frame_header_padding() override { return frame_header_padding_; }
-  // Get the frame footer size required by this protocol
-  uint8_t frame_footer_size() override { return frame_footer_size_; }
 
  protected:
   APIError try_read_frame_(std::vector<uint8_t> *frame);

esphome/components/api/api_pb2.cpp

@@ -2153,10 +2153,12 @@ void BluetoothDeviceClearCacheResponse::calculate_size(ProtoSize &size) const {
 void BluetoothScannerStateResponse::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_uint32(1, static_cast<uint32_t>(this->state));
   buffer.encode_uint32(2, static_cast<uint32_t>(this->mode));
+  buffer.encode_uint32(3, static_cast<uint32_t>(this->configured_mode));
 }
 void BluetoothScannerStateResponse::calculate_size(ProtoSize &size) const {
   size.add_uint32(1, static_cast<uint32_t>(this->state));
   size.add_uint32(1, static_cast<uint32_t>(this->mode));
+  size.add_uint32(1, static_cast<uint32_t>(this->configured_mode));
 }
 bool BluetoothScannerSetModeRequest::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {

esphome/components/api/api_pb2_dump.cpp

@@ -1135,7 +1135,7 @@ void ExecuteServiceArgument::dump_to(std::string &out) const {
   dump_field(out, "string_", this->string_);
   dump_field(out, "int_", this->int_);
   for (const auto it : this->bool_array) {
-    dump_field(out, "bool_array", it, 4);
+    dump_field(out, "bool_array", static_cast<bool>(it), 4);
   }
   for (const auto &it : this->int_array) {
     dump_field(out, "int_array", it, 4);
@@ -1704,6 +1704,7 @@ void BluetoothScannerStateResponse::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "BluetoothScannerStateResponse");
   dump_field(out, "state", static_cast<enums::BluetoothScannerState>(this->state));
   dump_field(out, "mode", static_cast<enums::BluetoothScannerMode>(this->mode));
+  dump_field(out, "configured_mode", static_cast<enums::BluetoothScannerMode>(this->configured_mode));
 }
 void BluetoothScannerSetModeRequest::dump_to(std::string &out) const {
   MessageDumpHelper helper(out, "BluetoothScannerSetModeRequest");

esphome/components/api/proto.cpp

@@ -8,74 +8,70 @@ namespace esphome::api {
 static const char *const TAG = "api.proto";
 
 void ProtoDecodableMessage::decode(const uint8_t *buffer, size_t length) {
-  uint32_t i = 0;
-  bool error = false;
-  while (i < length) {
+  const uint8_t *ptr = buffer;
+  const uint8_t *end = buffer + length;
+
+  while (ptr < end) {
     uint32_t consumed;
-    auto res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+
+    // Parse field header
+    auto res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
     if (!res.has_value()) {
-      ESP_LOGV(TAG, "Invalid field start at %" PRIu32, i);
-      break;
+      ESP_LOGV(TAG, "Invalid field start at offset %ld", (long) (ptr - buffer));
+      return;
     }
 
-    uint32_t field_type = (res->as_uint32()) & 0b111;
-    uint32_t field_id = (res->as_uint32()) >> 3;
-    i += consumed;
+    uint32_t tag = res->as_uint32();
+    uint32_t field_type = tag & 0b111;
+    uint32_t field_id = tag >> 3;
+    ptr += consumed;
 
     switch (field_type) {
       case 0: {  // VarInt
-        res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+        res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
         if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid VarInt at %" PRIu32, i);
-          error = true;
-          break;
+          ESP_LOGV(TAG, "Invalid VarInt at offset %ld", (long) (ptr - buffer));
+          return;
         }
         if (!this->decode_varint(field_id, *res)) {
           ESP_LOGV(TAG, "Cannot decode VarInt field %" PRIu32 " with value %" PRIu32 "!", field_id, res->as_uint32());
         }
-        i += consumed;
+        ptr += consumed;
         break;
       }
       case 2: {  // Length-delimited
-        res = ProtoVarInt::parse(&buffer[i], length - i, &consumed);
+        res = ProtoVarInt::parse(ptr, end - ptr, &consumed);
         if (!res.has_value()) {
-          ESP_LOGV(TAG, "Invalid Length Delimited at %" PRIu32, i);
-          error = true;
-          break;
+          ESP_LOGV(TAG, "Invalid Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
         }
         uint32_t field_length = res->as_uint32();
-        i += consumed;
-        if (field_length > length - i) {
-          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at %" PRIu32, i);
-          error = true;
-          break;
+        ptr += consumed;
+        if (ptr + field_length > end) {
+          ESP_LOGV(TAG, "Out-of-bounds Length Delimited at offset %ld", (long) (ptr - buffer));
+          return;
         }
-        if (!this->decode_length(field_id, ProtoLengthDelimited(&buffer[i], field_length))) {
+        if (!this->decode_length(field_id, ProtoLengthDelimited(ptr, field_length))) {
           ESP_LOGV(TAG, "Cannot decode Length Delimited field %" PRIu32 "!", field_id);
         }
-        i += field_length;
+        ptr += field_length;
         break;
       }
       case 5: {  // 32-bit
-        if (length - i < 4) {
-          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at %" PRIu32, i);
-          error = true;
-          break;
+        if (ptr + 4 > end) {
+          ESP_LOGV(TAG, "Out-of-bounds Fixed32-bit at offset %ld", (long) (ptr - buffer));
+          return;
         }
-        uint32_t val = encode_uint32(buffer[i + 3], buffer[i + 2], buffer[i + 1], buffer[i]);
+        uint32_t val = encode_uint32(ptr[3], ptr[2], ptr[1], ptr[0]);
         if (!this->decode_32bit(field_id, Proto32Bit(val))) {
           ESP_LOGV(TAG, "Cannot decode 32-bit field %" PRIu32 " with value %" PRIu32 "!", field_id, val);
         }
-        i += 4;
+        ptr += 4;
         break;
       }
       default:
-        ESP_LOGV(TAG, "Invalid field type at %" PRIu32, i);
-        error = true;
-        break;
-    }
-    if (error) {
-      break;
+        ESP_LOGV(TAG, "Invalid field type %u at offset %ld", field_type, (long) (ptr - buffer));
+        return;
     }
   }
 }

esphome/components/async_tcp/__init__.py

@@ -8,7 +8,7 @@ from esphome.const import (
     PLATFORM_LN882X,
     PLATFORM_RTL87XX,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@esphome/core"]
 
@@ -27,7 +27,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(200.0)
+@coroutine_with_priority(CoroPriority.NETWORK_TRANSPORT)
 async def to_code(config):
     if CORE.is_esp32 or CORE.is_libretiny:
         # https://github.com/ESP32Async/AsyncTCP

esphome/components/atm90e32/atm90e32.cpp

@@ -382,20 +382,15 @@ float ATM90E32Component::get_setup_priority() const { return setup_priority::IO;
 // R/C registers can conly be cleared after the LastSPIData register is updated (register 78H)
 // Peakdetect period: 05H. Bit 15:8 are PeakDet_period in ms. 7:0 are Sag_period
 // Default is 143FH (20ms, 63ms)
-uint16_t ATM90E32Component::read16_transaction_(uint16_t a_register) {
+uint16_t ATM90E32Component::read16_(uint16_t a_register) {
+  this->enable();
+  delay_microseconds_safe(1);  // min delay between CS low and first SCK is 200ns - 1us is plenty
   uint8_t addrh = (1 << 7) | ((a_register >> 8) & 0x03);
   uint8_t addrl = (a_register & 0xFF);
   uint8_t data[4] = {addrh, addrl, 0x00, 0x00};
   this->transfer_array(data, 4);
   uint16_t output = encode_uint16(data[2], data[3]);
   ESP_LOGVV(TAG, "read16_ 0x%04" PRIX16 " output 0x%04" PRIX16, a_register, output);
-  return output;
-}
-
-uint16_t ATM90E32Component::read16_(uint16_t a_register) {
-  this->enable();
-  delay_microseconds_safe(1);  // min delay between CS low and first SCK is 200ns - 1us is plenty
-  uint16_t output = this->read16_transaction_(a_register);
   delay_microseconds_safe(1);  // allow the last clock to propagate before releasing CS
   this->disable();
   delay_microseconds_safe(1);  // meet minimum CS high time before next transaction
@@ -403,14 +398,8 @@ uint16_t ATM90E32Component::read16_(uint16_t a_register) {
 }
 
 int ATM90E32Component::read32_(uint16_t addr_h, uint16_t addr_l) {
-  this->enable();
-  delay_microseconds_safe(1);
-  const uint16_t val_h = this->read16_transaction_(addr_h);
-  delay_microseconds_safe(1);
-  const uint16_t val_l = this->read16_transaction_(addr_l);
-  delay_microseconds_safe(1);
-  this->disable();
-  delay_microseconds_safe(1);
+  const uint16_t val_h = this->read16_(addr_h);
+  const uint16_t val_l = this->read16_(addr_l);
   const int32_t val = (val_h << 16) | val_l;
 
   ESP_LOGVV(TAG,

esphome/components/atm90e32/atm90e32.h

@@ -140,7 +140,6 @@ class ATM90E32Component : public PollingComponent,
   number::Number *ref_currents_[3]{nullptr, nullptr, nullptr};
 #endif
   uint16_t read16_(uint16_t a_register);
-  uint16_t read16_transaction_(uint16_t a_register);
   int read32_(uint16_t addr_h, uint16_t addr_l);
   void write16_(uint16_t a_register, uint16_t val, bool validate = true);
   float get_local_phase_voltage_(uint8_t phase);

esphome/components/audio_adc/__init__.py

@@ -2,7 +2,7 @@ from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_MIC_GAIN
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@kbx81"]
 IS_PLATFORM_COMPONENT = True
@@ -35,7 +35,7 @@ async def audio_adc_set_mic_gain_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_define("USE_AUDIO_ADC")
     cg.add_global(audio_adc_ns.using)

esphome/components/audio_dac/__init__.py

@@ -3,7 +3,7 @@ from esphome.automation import maybe_simple_id
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_VOLUME
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 CODEOWNERS = ["@kbx81"]
 IS_PLATFORM_COMPONENT = True
@@ -51,7 +51,7 @@ async def audio_dac_set_volume_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_define("USE_AUDIO_DAC")
     cg.add_global(audio_dac_ns.using)

esphome/components/axs15231/touchscreen/axs15231_touchscreen.cpp

@@ -41,7 +41,7 @@ void AXS15231Touchscreen::update_touches() {
   i2c::ErrorCode err;
   uint8_t data[8]{};
 
-  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD), false);
+  err = this->write(AXS_READ_TOUCHPAD, sizeof(AXS_READ_TOUCHPAD));
   ERROR_CHECK(err);
   err = this->read(data, sizeof(data));
   ERROR_CHECK(err);

esphome/components/binary_sensor/__init__.py

@@ -59,7 +59,7 @@ from esphome.const import (
     DEVICE_CLASS_VIBRATION,
     DEVICE_CLASS_WINDOW,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 from esphome.util import Registry
@@ -652,7 +652,7 @@ async def binary_sensor_is_off_to_code(config, condition_id, template_arg, args)
     return cg.new_Pvariable(condition_id, template_arg, paren, False)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(binary_sensor_ns.using)
 

esphome/components/binary_sensor/binary_sensor.cpp

@@ -7,6 +7,19 @@ namespace binary_sensor {
 
 static const char *const TAG = "binary_sensor";
 
+// Function implementation of LOG_BINARY_SENSOR macro to reduce code size
+void log_binary_sensor(const char *tag, const char *prefix, const char *type, BinarySensor *obj) {
+  if (obj == nullptr) {
+    return;
+  }
+
+  ESP_LOGCONFIG(tag, "%s%s '%s'", prefix, type, obj->get_name().c_str());
+
+  if (!obj->get_device_class_ref().empty()) {
+    ESP_LOGCONFIG(tag, "%s  Device Class: '%s'", prefix, obj->get_device_class_ref().c_str());
+  }
+}
+
 void BinarySensor::publish_state(bool new_state) {
   if (this->filter_list_ == nullptr) {
     this->send_state_internal(new_state);

esphome/components/binary_sensor/binary_sensor.h

@@ -10,13 +10,10 @@ namespace esphome {
 
 namespace binary_sensor {
 
-#define LOG_BINARY_SENSOR(prefix, type, obj) \
-  if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_device_class().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Device Class: '%s'", prefix, (obj)->get_device_class().c_str()); \
-    } \
-  }
+class BinarySensor;
+void log_binary_sensor(const char *tag, const char *prefix, const char *type, BinarySensor *obj);
+
+#define LOG_BINARY_SENSOR(prefix, type, obj) log_binary_sensor(TAG, prefix, LOG_STR_LITERAL(type), obj)
 
 #define SUB_BINARY_SENSOR(name) \
  protected: \

esphome/components/ble_client/__init__.py

@@ -286,6 +286,7 @@ async def remove_bond_to_code(config, action_id, template_arg, args):
 async def to_code(config):
     # Register the loggers this component needs
     esp32_ble.register_bt_logger(BTLoggers.GATT, BTLoggers.SMP)
+    cg.add_define("USE_ESP32_BLE_UUID")
 
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/ble_client/output/__init__.py

@@ -27,7 +27,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-def to_code(config):
+async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     if len(config[CONF_SERVICE_UUID]) == len(esp32_ble_tracker.bt_uuid16_format):
         cg.add(
@@ -63,6 +63,6 @@ def to_code(config):
         )
         cg.add(var.set_char_uuid128(uuid128))
     cg.add(var.set_require_response(config[CONF_REQUIRE_RESPONSE]))
-    yield output.register_output(var, config)
-    yield ble_client.register_ble_node(var, config)
-    yield cg.register_component(var, config)
+    await output.register_output(var, config)
+    await ble_client.register_ble_node(var, config)
+    await cg.register_component(var, config)

esphome/components/bluetooth_proxy/__init__.py

@@ -80,7 +80,7 @@ CONFIG_SCHEMA = cv.All(
         cv.Schema(
             {
                 cv.GenerateID(): cv.declare_id(BluetoothProxy),
-                cv.Optional(CONF_ACTIVE, default=False): cv.boolean,
+                cv.Optional(CONF_ACTIVE, default=True): cv.boolean,
                 cv.SplitDefault(CONF_CACHE_SERVICES, esp32_idf=True): cv.All(
                     cv.only_with_esp_idf, cv.boolean
                 ),

esphome/components/bluetooth_proxy/bluetooth_connection.cpp

@@ -12,16 +12,30 @@ namespace esphome::bluetooth_proxy {
 
 static const char *const TAG = "bluetooth_proxy.connection";
 
+// This function is allocation-free and directly packs UUIDs into the output array
+// using precalculated constants for the Bluetooth base UUID
 static void fill_128bit_uuid_array(std::array<uint64_t, 2> &out, esp_bt_uuid_t uuid_source) {
-  esp_bt_uuid_t uuid = espbt::ESPBTUUID::from_uuid(uuid_source).as_128bit().get_uuid();
-  out[0] = ((uint64_t) uuid.uuid.uuid128[15] << 56) | ((uint64_t) uuid.uuid.uuid128[14] << 48) |
-           ((uint64_t) uuid.uuid.uuid128[13] << 40) | ((uint64_t) uuid.uuid.uuid128[12] << 32) |
-           ((uint64_t) uuid.uuid.uuid128[11] << 24) | ((uint64_t) uuid.uuid.uuid128[10] << 16) |
-           ((uint64_t) uuid.uuid.uuid128[9] << 8) | ((uint64_t) uuid.uuid.uuid128[8]);
-  out[1] = ((uint64_t) uuid.uuid.uuid128[7] << 56) | ((uint64_t) uuid.uuid.uuid128[6] << 48) |
-           ((uint64_t) uuid.uuid.uuid128[5] << 40) | ((uint64_t) uuid.uuid.uuid128[4] << 32) |
-           ((uint64_t) uuid.uuid.uuid128[3] << 24) | ((uint64_t) uuid.uuid.uuid128[2] << 16) |
-           ((uint64_t) uuid.uuid.uuid128[1] << 8) | ((uint64_t) uuid.uuid.uuid128[0]);
+  // Bluetooth base UUID: 00000000-0000-1000-8000-00805F9B34FB
+  // out[0] = bytes 8-15 (big-endian)
+  // - For 128-bit UUIDs: use bytes 8-15 as-is
+  // - For 16/32-bit UUIDs: insert into bytes 12-15, use 0x00001000 for bytes 8-11
+  out[0] = uuid_source.len == ESP_UUID_LEN_128
+               ? (((uint64_t) uuid_source.uuid.uuid128[15] << 56) | ((uint64_t) uuid_source.uuid.uuid128[14] << 48) |
+                  ((uint64_t) uuid_source.uuid.uuid128[13] << 40) | ((uint64_t) uuid_source.uuid.uuid128[12] << 32) |
+                  ((uint64_t) uuid_source.uuid.uuid128[11] << 24) | ((uint64_t) uuid_source.uuid.uuid128[10] << 16) |
+                  ((uint64_t) uuid_source.uuid.uuid128[9] << 8) | ((uint64_t) uuid_source.uuid.uuid128[8]))
+               : (((uint64_t) (uuid_source.len == ESP_UUID_LEN_16 ? uuid_source.uuid.uuid16 : uuid_source.uuid.uuid32)
+                   << 32) |
+                  0x00001000ULL);  // Base UUID bytes 8-11
+  // out[1] = bytes 0-7 (big-endian)
+  // - For 128-bit UUIDs: use bytes 0-7 as-is
+  // - For 16/32-bit UUIDs: use precalculated base UUID constant
+  out[1] = uuid_source.len == ESP_UUID_LEN_128
+               ? ((uint64_t) uuid_source.uuid.uuid128[7] << 56) | ((uint64_t) uuid_source.uuid.uuid128[6] << 48) |
+                     ((uint64_t) uuid_source.uuid.uuid128[5] << 40) | ((uint64_t) uuid_source.uuid.uuid128[4] << 32) |
+                     ((uint64_t) uuid_source.uuid.uuid128[3] << 24) | ((uint64_t) uuid_source.uuid.uuid128[2] << 16) |
+                     ((uint64_t) uuid_source.uuid.uuid128[1] << 8) | ((uint64_t) uuid_source.uuid.uuid128[0])
+               : 0x800000805F9B34FBULL;  // Base UUID bytes 0-7: 80-00-00-80-5F-9B-34-FB
 }
 
 // Helper to fill UUID in the appropriate format based on client support and UUID type
@@ -119,7 +133,7 @@ void BluetoothConnection::loop() {
 
   // Check if we should disable the loop
   // - For V3_WITH_CACHE: Services are never sent, disable after INIT state
-  // - For other connections: Disable only after service discovery is complete
+  // - For V3_WITHOUT_CACHE: Disable only after service discovery is complete
   //   (send_service_ == DONE_SENDING_SERVICES, which is only set after services are sent)
   if (this->state_ != espbt::ClientState::INIT && (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
                                                    this->send_service_ == DONE_SENDING_SERVICES)) {
@@ -146,10 +160,7 @@ void BluetoothConnection::send_service_for_discovery_() {
   if (this->send_service_ >= this->service_count_) {
     this->send_service_ = DONE_SENDING_SERVICES;
     this->proxy_->send_gatt_services_done(this->address_);
-    if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE ||
-        this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
-      this->release_services();
-    }
+    this->release_services();
     return;
   }
 
@@ -364,10 +375,19 @@ bool BluetoothConnection::gattc_event_handler(esp_gattc_cb_event_t event, esp_ga
 
   switch (event) {
     case ESP_GATTC_DISCONNECT_EVT: {
-      this->reset_connection_(param->disconnect.reason);
+      // Don't reset connection yet - wait for CLOSE_EVT to ensure controller has freed resources
+      // This prevents race condition where we mark slot as free before controller cleanup is complete
+      ESP_LOGD(TAG, "[%d] [%s] Disconnect, reason=0x%02x", this->connection_index_, this->address_str_.c_str(),
+               param->disconnect.reason);
+      // Send disconnection notification but don't free the slot yet
+      this->proxy_->send_device_connection(this->address_, false, 0, param->disconnect.reason);
       break;
     }
     case ESP_GATTC_CLOSE_EVT: {
+      ESP_LOGD(TAG, "[%d] [%s] Close, reason=0x%02x, freeing slot", this->connection_index_, this->address_str_.c_str(),
+               param->close.reason);
+      // Now the GATT connection is fully closed and controller resources are freed
+      // Safe to mark the connection slot as available
       this->reset_connection_(param->close.reason);
       break;
     }

esphome/components/bluetooth_proxy/bluetooth_connection.h

@@ -8,7 +8,7 @@ namespace esphome::bluetooth_proxy {
 
 class BluetoothProxy;
 
-class BluetoothConnection : public esp32_ble_client::BLEClientBase {
+class BluetoothConnection final : public esp32_ble_client::BLEClientBase {
  public:
   void dump_config() override;
   void loop() override;

esphome/components/bluetooth_proxy/bluetooth_proxy.cpp

@@ -24,6 +24,9 @@ void BluetoothProxy::setup() {
   this->connections_free_response_.limit = BLUETOOTH_PROXY_MAX_CONNECTIONS;
   this->connections_free_response_.free = BLUETOOTH_PROXY_MAX_CONNECTIONS;
 
+  // Capture the configured scan mode from YAML before any API changes
+  this->configured_scan_active_ = this->parent_->get_scan_active();
+
   this->parent_->add_scanner_state_callback([this](esp32_ble_tracker::ScannerState state) {
     if (this->api_connection_ != nullptr) {
       this->send_bluetooth_scanner_state_(state);
@@ -36,6 +39,9 @@ void BluetoothProxy::send_bluetooth_scanner_state_(esp32_ble_tracker::ScannerSta
   resp.state = static_cast<api::enums::BluetoothScannerState>(state);
   resp.mode = this->parent_->get_scan_active() ? api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_ACTIVE
                                                : api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_PASSIVE;
+  resp.configured_mode = this->configured_scan_active_
+                             ? api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_ACTIVE
+                             : api::enums::BluetoothScannerMode::BLUETOOTH_SCANNER_MODE_PASSIVE;
   this->api_connection_->send_message(resp, api::BluetoothScannerStateResponse::MESSAGE_TYPE);
 }
 
@@ -183,6 +189,12 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
         this->send_device_connection(msg.address, false);
         return;
       }
+      if (!msg.has_address_type) {
+        ESP_LOGE(TAG, "[%d] [%s] Missing address type in connect request", connection->get_connection_index(),
+                 connection->address_str().c_str());
+        this->send_device_connection(msg.address, false);
+        return;
+      }
       if (connection->state() == espbt::ClientState::CONNECTED ||
           connection->state() == espbt::ClientState::ESTABLISHED) {
         this->log_connection_request_ignored_(connection, connection->state());
@@ -209,13 +221,9 @@ void BluetoothProxy::bluetooth_device_request(const api::BluetoothDeviceRequest
         connection->set_connection_type(espbt::ConnectionType::V3_WITHOUT_CACHE);
         this->log_connection_info_(connection, "v3 without cache");
       }
-      if (msg.has_address_type) {
-        uint64_to_bd_addr(msg.address, connection->remote_bda_);
-        connection->set_remote_addr_type(static_cast<esp_ble_addr_type_t>(msg.address_type));
-        connection->set_state(espbt::ClientState::DISCOVERED);
-      } else {
-        connection->set_state(espbt::ClientState::SEARCHING);
-      }
+      uint64_to_bd_addr(msg.address, connection->remote_bda_);
+      connection->set_remote_addr_type(static_cast<esp_ble_addr_type_t>(msg.address_type));
+      connection->set_state(espbt::ClientState::DISCOVERED);
       this->send_connections_free();
       break;
     }

esphome/components/bluetooth_proxy/bluetooth_proxy.h

@@ -50,7 +50,7 @@ enum BluetoothProxySubscriptionFlag : uint32_t {
   SUBSCRIPTION_RAW_ADVERTISEMENTS = 1 << 0,
 };
 
-class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Component {
+class BluetoothProxy final : public esp32_ble_tracker::ESPBTDeviceListener, public Component {
   friend class BluetoothConnection;  // Allow connection to update connections_free_response_
  public:
   BluetoothProxy();
@@ -161,7 +161,8 @@ class BluetoothProxy : public esp32_ble_tracker::ESPBTDeviceListener, public Com
   // Group 4: 1-byte types grouped together
   bool active_;
   uint8_t connection_count_{0};
-  // 2 bytes used, 2 bytes padding
+  bool configured_scan_active_{false};  // Configured scan mode from YAML
+  // 3 bytes used, 1 byte padding
 };
 
 extern BluetoothProxy *global_bluetooth_proxy;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

esphome/components/bme280_base/bme280_base.cpp

@@ -7,6 +7,8 @@
 #include <esphome/components/sensor/sensor.h>
 #include <esphome/core/component.h>
 
+#define BME280_ERROR_WRONG_CHIP_ID "Wrong chip ID"
+
 namespace esphome {
 namespace bme280_base {
 
@@ -98,18 +100,18 @@ void BME280Component::setup() {
 
   if (!this->read_byte(BME280_REGISTER_CHIPID, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   if (chip_id != 0x60) {
     this->error_code_ = WRONG_CHIP_ID;
-    this->mark_failed();
+    this->mark_failed(BME280_ERROR_WRONG_CHIP_ID);
     return;
   }
 
   // Send a soft reset.
   if (!this->write_byte(BME280_REGISTER_RESET, BME280_SOFT_RESET)) {
-    this->mark_failed();
+    this->mark_failed("Reset failed");
     return;
   }
   // Wait until the NVM data has finished loading.
@@ -118,14 +120,12 @@ void BME280Component::setup() {
   do {  // NOLINT
     delay(2);
     if (!this->read_byte(BME280_REGISTER_STATUS, &status)) {
-      ESP_LOGW(TAG, "Error reading status register.");
-      this->mark_failed();
+      this->mark_failed("Error reading status register");
       return;
     }
   } while ((status & BME280_STATUS_IM_UPDATE) && (--retry));
   if (status & BME280_STATUS_IM_UPDATE) {
-    ESP_LOGW(TAG, "Timeout loading NVM.");
-    this->mark_failed();
+    this->mark_failed("Timeout loading NVM");
     return;
   }
 
@@ -153,26 +153,26 @@ void BME280Component::setup() {
 
   uint8_t humid_control_val = 0;
   if (!this->read_byte(BME280_REGISTER_CONTROLHUMID, &humid_control_val)) {
-    this->mark_failed();
+    this->mark_failed("Read humidity control");
     return;
   }
   humid_control_val &= ~0b00000111;
   humid_control_val |= this->humidity_oversampling_ & 0b111;
   if (!this->write_byte(BME280_REGISTER_CONTROLHUMID, humid_control_val)) {
-    this->mark_failed();
+    this->mark_failed("Write humidity control");
     return;
   }
 
   uint8_t config_register = 0;
   if (!this->read_byte(BME280_REGISTER_CONFIG, &config_register)) {
-    this->mark_failed();
+    this->mark_failed("Read config");
     return;
   }
   config_register &= ~0b11111100;
   config_register |= 0b101 << 5;  // 1000 ms standby time
   config_register |= (this->iir_filter_ & 0b111) << 2;
   if (!this->write_byte(BME280_REGISTER_CONFIG, config_register)) {
-    this->mark_failed();
+    this->mark_failed("Write config");
     return;
   }
 }
@@ -183,7 +183,7 @@ void BME280Component::dump_config() {
       ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
-      ESP_LOGE(TAG, "BME280 has wrong chip ID! Is it a BME280?");
+      ESP_LOGE(TAG, BME280_ERROR_WRONG_CHIP_ID);
       break;
     case NONE:
     default:
@@ -223,21 +223,21 @@ void BME280Component::update() {
   this->set_timeout("data", uint32_t(ceilf(meas_time)), [this]() {
     uint8_t data[8];
     if (!this->read_bytes(BME280_REGISTER_MEASUREMENTS, data, 8)) {
-      ESP_LOGW(TAG, "Error reading registers.");
+      ESP_LOGW(TAG, "Error reading registers");
       this->status_set_warning();
       return;
     }
     int32_t t_fine = 0;
     float const temperature = this->read_temperature_(data, &t_fine);
     if (std::isnan(temperature)) {
-      ESP_LOGW(TAG, "Invalid temperature, cannot read pressure & humidity values.");
+      ESP_LOGW(TAG, "Invalid temperature");
       this->status_set_warning();
       return;
     }
     float const pressure = this->read_pressure_(data, t_fine);
     float const humidity = this->read_humidity_(data, t_fine);
 
-    ESP_LOGV(TAG, "Got temperature=%.1f°C pressure=%.1fhPa humidity=%.1f%%", temperature, pressure, humidity);
+    ESP_LOGV(TAG, "Temperature=%.1f°C Pressure=%.1fhPa Humidity=%.1f%%", temperature, pressure, humidity);
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(temperature);
     if (this->pressure_sensor_ != nullptr)

esphome/components/bmi160/bmi160.cpp

@@ -203,7 +203,7 @@ void BMI160Component::dump_config() {
 i2c::ErrorCode BMI160Component::read_le_int16_(uint8_t reg, int16_t *value, uint8_t len) {
   uint8_t raw_data[len * 2];
   // read using read_register because we have little-endian data, and read_bytes_16 will swap it
-  i2c::ErrorCode err = this->read_register(reg, raw_data, len * 2, true);
+  i2c::ErrorCode err = this->read_register(reg, raw_data, len * 2);
   if (err != i2c::ERROR_OK) {
     return err;
   }

esphome/components/bmp280_base/bmp280_base.cpp

@@ -2,6 +2,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/log.h"
 
+#define BMP280_ERROR_WRONG_CHIP_ID "Wrong chip ID"
+
 namespace esphome {
 namespace bmp280_base {
 
@@ -61,25 +63,25 @@ void BMP280Component::setup() {
 
   // Read the chip id twice, to work around a bug where the first read is 0.
   // https://community.st.com/t5/stm32-mcus-products/issue-with-reading-bmp280-chip-id-using-spi/td-p/691855
-  if (!this->read_byte(0xD0, &chip_id)) {
+  if (!this->bmp_read_byte(0xD0, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
-  if (!this->read_byte(0xD0, &chip_id)) {
+  if (!this->bmp_read_byte(0xD0, &chip_id)) {
     this->error_code_ = COMMUNICATION_FAILED;
-    this->mark_failed();
+    this->mark_failed(ESP_LOG_MSG_COMM_FAIL);
     return;
   }
   if (chip_id != 0x58) {
     this->error_code_ = WRONG_CHIP_ID;
-    this->mark_failed();
+    this->mark_failed(BMP280_ERROR_WRONG_CHIP_ID);
     return;
   }
 
   // Send a soft reset.
-  if (!this->write_byte(BMP280_REGISTER_RESET, BMP280_SOFT_RESET)) {
-    this->mark_failed();
+  if (!this->bmp_write_byte(BMP280_REGISTER_RESET, BMP280_SOFT_RESET)) {
+    this->mark_failed("Reset failed");
     return;
   }
   // Wait until the NVM data has finished loading.
@@ -87,15 +89,13 @@ void BMP280Component::setup() {
   uint8_t retry = 5;
   do {
     delay(2);
-    if (!this->read_byte(BMP280_REGISTER_STATUS, &status)) {
-      ESP_LOGW(TAG, "Error reading status register.");
-      this->mark_failed();
+    if (!this->bmp_read_byte(BMP280_REGISTER_STATUS, &status)) {
+      this->mark_failed("Error reading status register");
       return;
     }
   } while ((status & BMP280_STATUS_IM_UPDATE) && (--retry));
   if (status & BMP280_STATUS_IM_UPDATE) {
-    ESP_LOGW(TAG, "Timeout loading NVM.");
-    this->mark_failed();
+    this->mark_failed("Timeout loading NVM");
     return;
   }
 
@@ -115,15 +115,15 @@ void BMP280Component::setup() {
   this->calibration_.p9 = this->read_s16_le_(0x9E);
 
   uint8_t config_register = 0;
-  if (!this->read_byte(BMP280_REGISTER_CONFIG, &config_register)) {
-    this->mark_failed();
+  if (!this->bmp_read_byte(BMP280_REGISTER_CONFIG, &config_register)) {
+    this->mark_failed("Read config");
     return;
   }
   config_register &= ~0b11111100;
   config_register |= 0b000 << 5;  // 0.5 ms standby time
   config_register |= (this->iir_filter_ & 0b111) << 2;
-  if (!this->write_byte(BMP280_REGISTER_CONFIG, config_register)) {
-    this->mark_failed();
+  if (!this->bmp_write_byte(BMP280_REGISTER_CONFIG, config_register)) {
+    this->mark_failed("Write config");
     return;
   }
 }
@@ -134,7 +134,7 @@ void BMP280Component::dump_config() {
       ESP_LOGE(TAG, ESP_LOG_MSG_COMM_FAIL);
       break;
     case WRONG_CHIP_ID:
-      ESP_LOGE(TAG, "BMP280 has wrong chip ID! Is it a BME280?");
+      ESP_LOGE(TAG, BMP280_ERROR_WRONG_CHIP_ID);
       break;
     case NONE:
     default:
@@ -159,7 +159,7 @@ void BMP280Component::update() {
   meas_value |= (this->temperature_oversampling_ & 0b111) << 5;
   meas_value |= (this->pressure_oversampling_ & 0b111) << 2;
   meas_value |= 0b01;  // Forced mode
-  if (!this->write_byte(BMP280_REGISTER_CONTROL, meas_value)) {
+  if (!this->bmp_write_byte(BMP280_REGISTER_CONTROL, meas_value)) {
     this->status_set_warning();
     return;
   }
@@ -172,13 +172,13 @@ void BMP280Component::update() {
     int32_t t_fine = 0;
     float temperature = this->read_temperature_(&t_fine);
     if (std::isnan(temperature)) {
-      ESP_LOGW(TAG, "Invalid temperature, cannot read pressure values.");
+      ESP_LOGW(TAG, "Invalid temperature");
       this->status_set_warning();
       return;
     }
     float pressure = this->read_pressure_(t_fine);
 
-    ESP_LOGD(TAG, "Got temperature=%.1f°C pressure=%.1fhPa", temperature, pressure);
+    ESP_LOGV(TAG, "Temperature=%.1f°C Pressure=%.1fhPa", temperature, pressure);
     if (this->temperature_sensor_ != nullptr)
       this->temperature_sensor_->publish_state(temperature);
     if (this->pressure_sensor_ != nullptr)
@@ -188,9 +188,10 @@ void BMP280Component::update() {
 }
 
 float BMP280Component::read_temperature_(int32_t *t_fine) {
-  uint8_t data[3];
-  if (!this->read_bytes(BMP280_REGISTER_TEMPDATA, data, 3))
+  uint8_t data[3]{};
+  if (!this->bmp_read_bytes(BMP280_REGISTER_TEMPDATA, data, 3))
     return NAN;
+  ESP_LOGV(TAG, "Read temperature data, raw: %02X %02X %02X", data[0], data[1], data[2]);
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
   if (adc == 0x80000) {
@@ -212,7 +213,7 @@ float BMP280Component::read_temperature_(int32_t *t_fine) {
 
 float BMP280Component::read_pressure_(int32_t t_fine) {
   uint8_t data[3];
-  if (!this->read_bytes(BMP280_REGISTER_PRESSUREDATA, data, 3))
+  if (!this->bmp_read_bytes(BMP280_REGISTER_PRESSUREDATA, data, 3))
     return NAN;
   int32_t adc = ((data[0] & 0xFF) << 16) | ((data[1] & 0xFF) << 8) | (data[2] & 0xFF);
   adc >>= 4;
@@ -258,12 +259,12 @@ void BMP280Component::set_pressure_oversampling(BMP280Oversampling pressure_over
 void BMP280Component::set_iir_filter(BMP280IIRFilter iir_filter) { this->iir_filter_ = iir_filter; }
 uint8_t BMP280Component::read_u8_(uint8_t a_register) {
   uint8_t data = 0;
-  this->read_byte(a_register, &data);
+  this->bmp_read_byte(a_register, &data);
   return data;
 }
 uint16_t BMP280Component::read_u16_le_(uint8_t a_register) {
   uint16_t data = 0;
-  this->read_byte_16(a_register, &data);
+  this->bmp_read_byte_16(a_register, &data);
   return (data >> 8) | (data << 8);
 }
 int16_t BMP280Component::read_s16_le_(uint8_t a_register) { return this->read_u16_le_(a_register); }

esphome/components/bmp280_base/bmp280_base.h

@@ -67,12 +67,12 @@ class BMP280Component : public PollingComponent {
   float get_setup_priority() const override;
   void update() override;
 
-  virtual bool read_byte(uint8_t a_register, uint8_t *data) = 0;
-  virtual bool write_byte(uint8_t a_register, uint8_t data) = 0;
-  virtual bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) = 0;
-  virtual bool read_byte_16(uint8_t a_register, uint16_t *data) = 0;
-
  protected:
+  virtual bool bmp_read_byte(uint8_t a_register, uint8_t *data) = 0;
+  virtual bool bmp_write_byte(uint8_t a_register, uint8_t data) = 0;
+  virtual bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) = 0;
+  virtual bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) = 0;
+
   /// Read the temperature value and store the calculated ambient temperature in t_fine.
   float read_temperature_(int32_t *t_fine);
   /// Read the pressure value in hPa using the provided t_fine value.

esphome/components/bmp280_i2c/bmp280_i2c.cpp

@@ -5,19 +5,6 @@
 namespace esphome {
 namespace bmp280_i2c {
 
-bool BMP280I2CComponent::read_byte(uint8_t a_register, uint8_t *data) {
-  return I2CDevice::read_byte(a_register, data);
-};
-bool BMP280I2CComponent::write_byte(uint8_t a_register, uint8_t data) {
-  return I2CDevice::write_byte(a_register, data);
-};
-bool BMP280I2CComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
-  return I2CDevice::read_bytes(a_register, data, len);
-};
-bool BMP280I2CComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
-  return I2CDevice::read_byte_16(a_register, data);
-};
-
 void BMP280I2CComponent::dump_config() {
   LOG_I2C_DEVICE(this);
   BMP280Component::dump_config();

esphome/components/bmp280_i2c/bmp280_i2c.h

@@ -11,10 +11,12 @@ static const char *const TAG = "bmp280_i2c.sensor";
 /// This class implements support for the BMP280 Temperature+Pressure i2c sensor.
 class BMP280I2CComponent : public esphome::bmp280_base::BMP280Component, public i2c::I2CDevice {
  public:
-  bool read_byte(uint8_t a_register, uint8_t *data) override;
-  bool write_byte(uint8_t a_register, uint8_t data) override;
-  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
-  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+  bool bmp_read_byte(uint8_t a_register, uint8_t *data) override { return read_byte(a_register, data); }
+  bool bmp_write_byte(uint8_t a_register, uint8_t data) override { return write_byte(a_register, data); }
+  bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) override {
+    return read_bytes(a_register, data, len);
+  }
+  bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) override { return read_byte_16(a_register, data); }
   void dump_config() override;
 };
 

esphome/components/bmp280_spi/bmp280_spi.cpp

@@ -28,7 +28,7 @@ void BMP280SPIComponent::setup() {
 // 0x77 is transferred, for read access, the byte 0xF7 is transferred.
 // https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
 
-bool BMP280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
+bool BMP280SPIComponent::bmp_read_byte(uint8_t a_register, uint8_t *data) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   *data = this->transfer_byte(0);
@@ -36,7 +36,7 @@ bool BMP280SPIComponent::read_byte(uint8_t a_register, uint8_t *data) {
   return true;
 }
 
-bool BMP280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
+bool BMP280SPIComponent::bmp_write_byte(uint8_t a_register, uint8_t data) {
   this->enable();
   this->transfer_byte(clear_bit(a_register, 7));
   this->transfer_byte(data);
@@ -44,7 +44,7 @@ bool BMP280SPIComponent::write_byte(uint8_t a_register, uint8_t data) {
   return true;
 }
 
-bool BMP280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
+bool BMP280SPIComponent::bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   this->read_array(data, len);
@@ -52,7 +52,7 @@ bool BMP280SPIComponent::read_bytes(uint8_t a_register, uint8_t *data, size_t le
   return true;
 }
 
-bool BMP280SPIComponent::read_byte_16(uint8_t a_register, uint16_t *data) {
+bool BMP280SPIComponent::bmp_read_byte_16(uint8_t a_register, uint16_t *data) {
   this->enable();
   this->transfer_byte(set_bit(a_register, 7));
   ((uint8_t *) data)[1] = this->transfer_byte(0);

esphome/components/bmp280_spi/bmp280_spi.h

@@ -10,10 +10,10 @@ class BMP280SPIComponent : public esphome::bmp280_base::BMP280Component,
                            public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW,
                                                  spi::CLOCK_PHASE_LEADING, spi::DATA_RATE_200KHZ> {
   void setup() override;
-  bool read_byte(uint8_t a_register, uint8_t *data) override;
-  bool write_byte(uint8_t a_register, uint8_t data) override;
-  bool read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
-  bool read_byte_16(uint8_t a_register, uint16_t *data) override;
+  bool bmp_read_byte(uint8_t a_register, uint8_t *data) override;
+  bool bmp_write_byte(uint8_t a_register, uint8_t data) override;
+  bool bmp_read_bytes(uint8_t a_register, uint8_t *data, size_t len) override;
+  bool bmp_read_byte_16(uint8_t a_register, uint16_t *data) override;
 };
 
 }  // namespace bmp280_spi

esphome/components/button/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     DEVICE_CLASS_RESTART,
     DEVICE_CLASS_UPDATE,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -134,6 +134,6 @@ async def button_press_to_code(config, action_id, template_arg, args):
     return cg.new_Pvariable(action_id, template_arg, paren)
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(button_ns.using)

esphome/components/button/button.cpp

@@ -6,6 +6,19 @@ namespace button {
 
 static const char *const TAG = "button";
 
+// Function implementation of LOG_BUTTON macro to reduce code size
+void log_button(const char *tag, const char *prefix, const char *type, Button *obj) {
+  if (obj == nullptr) {
+    return;
+  }
+
+  ESP_LOGCONFIG(tag, "%s%s '%s'", prefix, type, obj->get_name().c_str());
+
+  if (!obj->get_icon_ref().empty()) {
+    ESP_LOGCONFIG(tag, "%s  Icon: '%s'", prefix, obj->get_icon_ref().c_str());
+  }
+}
+
 void Button::press() {
   ESP_LOGD(TAG, "'%s' Pressed.", this->get_name().c_str());
   this->press_action();

esphome/components/button/button.h

@@ -7,13 +7,10 @@
 namespace esphome {
 namespace button {
 
-#define LOG_BUTTON(prefix, type, obj) \
-  if ((obj) != nullptr) { \
-    ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_icon().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon().c_str()); \
-    } \
-  }
+class Button;
+void log_button(const char *tag, const char *prefix, const char *type, Button *obj);
+
+#define LOG_BUTTON(prefix, type, obj) log_button(TAG, prefix, LOG_STR_LITERAL(type), obj)
 
 #define SUB_BUTTON(name) \
  protected: \

esphome/components/camera/buffer.h

@@ -0,0 +1,18 @@
+#pragma once
+
+#include <cinttypes>
+#include <cstddef>
+
+namespace esphome::camera {
+
+/// Interface for a generic buffer that stores image data.
+class Buffer {
+ public:
+  /// Returns a pointer to the buffer's data.
+  virtual uint8_t *get_data_buffer() = 0;
+  /// Returns the length of the buffer in bytes.
+  virtual size_t get_data_length() = 0;
+  virtual ~Buffer() = default;
+};
+
+}  // namespace esphome::camera

esphome/components/camera/buffer_impl.cpp

@@ -0,0 +1,20 @@
+#include "buffer_impl.h"
+
+namespace esphome::camera {
+
+BufferImpl::BufferImpl(size_t size) {
+  this->data_ = this->allocator_.allocate(size);
+  this->size_ = size;
+}
+
+BufferImpl::BufferImpl(CameraImageSpec *spec) {
+  this->data_ = this->allocator_.allocate(spec->bytes_per_image());
+  this->size_ = spec->bytes_per_image();
+}
+
+BufferImpl::~BufferImpl() {
+  if (this->data_ != nullptr)
+    this->allocator_.deallocate(this->data_, this->size_);
+}
+
+}  // namespace esphome::camera

esphome/components/camera/buffer_impl.h

@@ -0,0 +1,26 @@
+#pragma once
+
+#include "buffer.h"
+#include "camera.h"
+
+namespace esphome::camera {
+
+/// Default implementation of Buffer Interface.
+/// Uses a RAMAllocator for memory reservation.
+class BufferImpl : public Buffer {
+ public:
+  explicit BufferImpl(size_t size);
+  explicit BufferImpl(CameraImageSpec *spec);
+  // -------- Buffer --------
+  uint8_t *get_data_buffer() override { return data_; }
+  size_t get_data_length() override { return size_; }
+  // ------------------------
+  ~BufferImpl() override;
+
+ protected:
+  RAMAllocator<uint8_t> allocator_;
+  size_t size_{};
+  uint8_t *data_{};
+};
+
+}  // namespace esphome::camera

esphome/components/camera/camera.h

@@ -15,6 +15,26 @@ namespace camera {
  */
 enum CameraRequester : uint8_t { IDLE, API_REQUESTER, WEB_REQUESTER };
 
+/// Enumeration of different pixel formats.
+enum PixelFormat : uint8_t {
+  PIXEL_FORMAT_GRAYSCALE = 0,  ///< 8-bit grayscale.
+  PIXEL_FORMAT_RGB565,         ///< 16-bit RGB (5-6-5).
+  PIXEL_FORMAT_BGR888,         ///< RGB pixel data in 8-bit format, stored as B, G, R (1 byte each).
+};
+
+/// Returns string name for a given PixelFormat.
+inline const char *to_string(PixelFormat format) {
+  switch (format) {
+    case PIXEL_FORMAT_GRAYSCALE:
+      return "PIXEL_FORMAT_GRAYSCALE";
+    case PIXEL_FORMAT_RGB565:
+      return "PIXEL_FORMAT_RGB565";
+    case PIXEL_FORMAT_BGR888:
+      return "PIXEL_FORMAT_BGR888";
+  }
+  return "PIXEL_FORMAT_UNKNOWN";
+}
+
 /** Abstract camera image base class.
  *  Encapsulates the JPEG encoded data and it is shared among
  *  all connected clients.
@@ -43,6 +63,29 @@ class CameraImageReader {
   virtual ~CameraImageReader() {}
 };
 
+/// Specification of a caputured camera image.
+/// This struct defines the format and size details for images captured
+/// or processed by a camera component.
+struct CameraImageSpec {
+  uint16_t width;
+  uint16_t height;
+  PixelFormat format;
+  size_t bytes_per_pixel() {
+    switch (format) {
+      case PIXEL_FORMAT_GRAYSCALE:
+        return 1;
+      case PIXEL_FORMAT_RGB565:
+        return 2;
+      case PIXEL_FORMAT_BGR888:
+        return 3;
+    }
+
+    return 1;
+  }
+  size_t bytes_per_row() { return bytes_per_pixel() * width; }
+  size_t bytes_per_image() { return bytes_per_pixel() * width * height; }
+};
+
 /** Abstract camera base class. Collaborates with API.
  *  1) API server starts and installs callback (add_image_callback)
  *     which is called by the camera when a new image is available.

esphome/components/camera/encoder.h

@@ -0,0 +1,69 @@
+#pragma once
+
+#include "buffer.h"
+#include "camera.h"
+
+namespace esphome::camera {
+
+/// Result codes from the encoder used to control camera pipeline flow.
+enum EncoderError : uint8_t {
+  ENCODER_ERROR_SUCCESS = 0,   ///< Encoding succeeded, continue pipeline normally.
+  ENCODER_ERROR_SKIP_FRAME,    ///< Skip current frame, try again on next frame.
+  ENCODER_ERROR_RETRY_FRAME,   ///< Retry current frame, after buffer growth or for incremental encoding.
+  ENCODER_ERROR_CONFIGURATION  ///< Fatal config error, shut down pipeline.
+};
+
+/// Converts EncoderError to string.
+inline const char *to_string(EncoderError error) {
+  switch (error) {
+    case ENCODER_ERROR_SUCCESS:
+      return "ENCODER_ERROR_SUCCESS";
+    case ENCODER_ERROR_SKIP_FRAME:
+      return "ENCODER_ERROR_SKIP_FRAME";
+    case ENCODER_ERROR_RETRY_FRAME:
+      return "ENCODER_ERROR_RETRY_FRAME";
+    case ENCODER_ERROR_CONFIGURATION:
+      return "ENCODER_ERROR_CONFIGURATION";
+  }
+  return "ENCODER_ERROR_INVALID";
+}
+
+/// Interface for an encoder buffer supporting resizing and variable-length data.
+class EncoderBuffer {
+ public:
+  ///  Sets logical buffer size, reallocates if needed.
+  ///  @param size Required size in bytes.
+  ///  @return true on success, false on allocation failure.
+  virtual bool set_buffer_size(size_t size) = 0;
+
+  /// Returns a pointer to the buffer data.
+  virtual uint8_t *get_data() const = 0;
+
+  /// Returns number of bytes currently used.
+  virtual size_t get_size() const = 0;
+
+  ///  Returns total allocated buffer size.
+  virtual size_t get_max_size() const = 0;
+
+  virtual ~EncoderBuffer() = default;
+};
+
+/// Interface for image encoders used in a camera pipeline.
+class Encoder {
+ public:
+  /// Encodes pixel data from a previous camera pipeline stage.
+  /// @param spec Specification of the input pixel data.
+  /// @param pixels Image pixels in RGB or grayscale format, as specified in @p spec.
+  /// @return EncoderError Indicating the result of the encoding operation.
+  virtual EncoderError encode_pixels(CameraImageSpec *spec, Buffer *pixels) = 0;
+
+  /// Returns the encoder's output buffer.
+  /// @return Pointer to an EncoderBuffer containing encoded data.
+  virtual EncoderBuffer *get_output_buffer() = 0;
+
+  ///  Prints the encoder's configuration to the log.
+  virtual void dump_config() = 0;
+  virtual ~Encoder() = default;
+};
+
+}  // namespace esphome::camera

esphome/components/camera_encoder/__init__.py

@@ -0,0 +1,62 @@
+import esphome.codegen as cg
+from esphome.components.esp32 import add_idf_component
+import esphome.config_validation as cv
+from esphome.const import CONF_BUFFER_SIZE, CONF_ID, CONF_TYPE
+from esphome.core import CORE
+from esphome.types import ConfigType
+
+CODEOWNERS = ["@DT-art1"]
+
+AUTO_LOAD = ["camera"]
+
+CONF_BUFFER_EXPAND_SIZE = "buffer_expand_size"
+CONF_ENCODER_BUFFER_ID = "encoder_buffer_id"
+CONF_QUALITY = "quality"
+
+ESP32_CAMERA_ENCODER = "esp32_camera"
+
+camera_ns = cg.esphome_ns.namespace("camera")
+camera_encoder_ns = cg.esphome_ns.namespace("camera_encoder")
+
+Encoder = camera_ns.class_("Encoder")
+EncoderBufferImpl = camera_encoder_ns.class_("EncoderBufferImpl")
+
+ESP32CameraJPEGEncoder = camera_encoder_ns.class_("ESP32CameraJPEGEncoder", Encoder)
+
+MAX_JPEG_BUFFER_SIZE_2MB = 2 * 1024 * 1024
+
+ESP32_CAMERA_ENCODER_SCHEMA = cv.Schema(
+    {
+        cv.GenerateID(): cv.declare_id(ESP32CameraJPEGEncoder),
+        cv.Optional(CONF_QUALITY, default=80): cv.int_range(1, 100),
+        cv.Optional(CONF_BUFFER_SIZE, default=4096): cv.int_range(
+            1024, MAX_JPEG_BUFFER_SIZE_2MB
+        ),
+        cv.Optional(CONF_BUFFER_EXPAND_SIZE, default=1024): cv.int_range(
+            0, MAX_JPEG_BUFFER_SIZE_2MB
+        ),
+        cv.GenerateID(CONF_ENCODER_BUFFER_ID): cv.declare_id(EncoderBufferImpl),
+    }
+)
+
+CONFIG_SCHEMA = cv.typed_schema(
+    {
+        ESP32_CAMERA_ENCODER: ESP32_CAMERA_ENCODER_SCHEMA,
+    },
+    default_type=ESP32_CAMERA_ENCODER,
+)
+
+
+async def to_code(config: ConfigType) -> None:
+    buffer = cg.new_Pvariable(config[CONF_ENCODER_BUFFER_ID])
+    cg.add(buffer.set_buffer_size(config[CONF_BUFFER_SIZE]))
+    if config[CONF_TYPE] == ESP32_CAMERA_ENCODER:
+        if CORE.using_esp_idf:
+            add_idf_component(name="espressif/esp32-camera", ref="2.1.0")
+        cg.add_build_flag("-DUSE_ESP32_CAMERA_JPEG_ENCODER")
+        var = cg.new_Pvariable(
+            config[CONF_ID],
+            config[CONF_QUALITY],
+            buffer,
+        )
+        cg.add(var.set_buffer_expand_size(config[CONF_BUFFER_EXPAND_SIZE]))

esphome/components/camera_encoder/encoder_buffer_impl.cpp

@@ -0,0 +1,23 @@
+#include "encoder_buffer_impl.h"
+
+namespace esphome::camera_encoder {
+
+bool EncoderBufferImpl::set_buffer_size(size_t size) {
+  if (size > this->capacity_) {
+    uint8_t *p = this->allocator_.reallocate(this->data_, size);
+    if (p == nullptr)
+      return false;
+
+    this->data_ = p;
+    this->capacity_ = size;
+  }
+  this->size_ = size;
+  return true;
+}
+
+EncoderBufferImpl::~EncoderBufferImpl() {
+  if (this->data_ != nullptr)
+    this->allocator_.deallocate(this->data_, this->capacity_);
+}
+
+}  // namespace esphome::camera_encoder

esphome/components/camera_encoder/encoder_buffer_impl.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#include "esphome/components/camera/encoder.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome::camera_encoder {
+
+class EncoderBufferImpl : public camera::EncoderBuffer {
+ public:
+  // --- EncoderBuffer  ---
+  bool set_buffer_size(size_t size) override;
+  uint8_t *get_data() const override { return this->data_; }
+  size_t get_size() const override { return this->size_; }
+  size_t get_max_size() const override { return this->capacity_; }
+  // ----------------------
+  ~EncoderBufferImpl() override;
+
+ protected:
+  RAMAllocator<uint8_t> allocator_;
+  size_t capacity_{};
+  size_t size_{};
+  uint8_t *data_{};
+};
+
+}  // namespace esphome::camera_encoder

esphome/components/camera_encoder/esp32_camera_jpeg_encoder.cpp

@@ -0,0 +1,82 @@
+#ifdef USE_ESP32_CAMERA_JPEG_ENCODER
+
+#include "esp32_camera_jpeg_encoder.h"
+
+namespace esphome::camera_encoder {
+
+static const char *const TAG = "camera_encoder";
+
+ESP32CameraJPEGEncoder::ESP32CameraJPEGEncoder(uint8_t quality, camera::EncoderBuffer *output) {
+  this->quality_ = quality;
+  this->output_ = output;
+}
+
+camera::EncoderError ESP32CameraJPEGEncoder::encode_pixels(camera::CameraImageSpec *spec, camera::Buffer *pixels) {
+  this->bytes_written_ = 0;
+  this->out_of_output_memory_ = false;
+  bool success = fmt2jpg_cb(pixels->get_data_buffer(), pixels->get_data_length(), spec->width, spec->height,
+                            to_internal_(spec->format), this->quality_, callback_, this);
+
+  if (!success)
+    return camera::ENCODER_ERROR_CONFIGURATION;
+
+  if (this->out_of_output_memory_) {
+    if (this->buffer_expand_size_ <= 0)
+      return camera::ENCODER_ERROR_SKIP_FRAME;
+
+    size_t current_size = this->output_->get_max_size();
+    size_t new_size = this->output_->get_max_size() + this->buffer_expand_size_;
+    if (!this->output_->set_buffer_size(new_size)) {
+      ESP_LOGE(TAG, "Failed to expand output buffer.");
+      this->buffer_expand_size_ = 0;
+      return camera::ENCODER_ERROR_SKIP_FRAME;
+    }
+
+    ESP_LOGD(TAG, "Output buffer expanded (%u -> %u).", current_size, this->output_->get_max_size());
+    return camera::ENCODER_ERROR_RETRY_FRAME;
+  }
+
+  this->output_->set_buffer_size(this->bytes_written_);
+  return camera::ENCODER_ERROR_SUCCESS;
+}
+
+void ESP32CameraJPEGEncoder::dump_config() {
+  ESP_LOGCONFIG(TAG,
+                "ESP32 Camera JPEG Encoder:\n"
+                "  Size: %zu\n"
+                "  Quality: %d\n"
+                "  Expand: %d\n",
+                this->output_->get_max_size(), this->quality_, this->buffer_expand_size_);
+}
+
+size_t ESP32CameraJPEGEncoder::callback_(void *arg, size_t index, const void *data, size_t len) {
+  ESP32CameraJPEGEncoder *that = reinterpret_cast<ESP32CameraJPEGEncoder *>(arg);
+  uint8_t *buffer = that->output_->get_data();
+  size_t buffer_length = that->output_->get_max_size();
+  if (index + len > buffer_length) {
+    that->out_of_output_memory_ = true;
+    return 0;
+  }
+
+  std::memcpy(&buffer[index], data, len);
+  that->bytes_written_ += len;
+  return len;
+}
+
+pixformat_t ESP32CameraJPEGEncoder::to_internal_(camera::PixelFormat format) {
+  switch (format) {
+    case camera::PIXEL_FORMAT_GRAYSCALE:
+      return PIXFORMAT_GRAYSCALE;
+    case camera::PIXEL_FORMAT_RGB565:
+      return PIXFORMAT_RGB565;
+    // Internal representation for RGB is in byte order: B, G, R
+    case camera::PIXEL_FORMAT_BGR888:
+      return PIXFORMAT_RGB888;
+  }
+
+  return PIXFORMAT_GRAYSCALE;
+}
+
+}  // namespace esphome::camera_encoder
+
+#endif

esphome/components/camera_encoder/esp32_camera_jpeg_encoder.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#ifdef USE_ESP32_CAMERA_JPEG_ENCODER
+
+#include <esp_camera.h>
+
+#include "esphome/components/camera/encoder.h"
+
+namespace esphome::camera_encoder {
+
+/// Encoder that uses the software-based JPEG implementation from Espressif's esp32-camera component.
+class ESP32CameraJPEGEncoder : public camera::Encoder {
+ public:
+  /// Constructs a ESP32CameraJPEGEncoder instance.
+  /// @param quality Sets the quality of the encoded image (1-100).
+  /// @param output Pointer to preallocated output buffer.
+  ESP32CameraJPEGEncoder(uint8_t quality, camera::EncoderBuffer *output);
+  /// Sets the number of bytes to expand the output buffer on underflow during encoding.
+  /// @param buffer_expand_size Number of bytes to expand the buffer.
+  void set_buffer_expand_size(size_t buffer_expand_size) { this->buffer_expand_size_ = buffer_expand_size; }
+  // -------- Encoder --------
+  camera::EncoderError encode_pixels(camera::CameraImageSpec *spec, camera::Buffer *pixels) override;
+  camera::EncoderBuffer *get_output_buffer() override { return output_; }
+  void dump_config() override;
+  // -------------------------
+ protected:
+  static size_t callback_(void *arg, size_t index, const void *data, size_t len);
+  pixformat_t to_internal_(camera::PixelFormat format);
+
+  camera::EncoderBuffer *output_{};
+  size_t buffer_expand_size_{};
+  size_t bytes_written_{};
+  uint8_t quality_{};
+  bool out_of_output_memory_{};
+};
+
+}  // namespace esphome::camera_encoder
+
+#endif

esphome/components/captive_portal/__init__.py

@@ -10,7 +10,7 @@ from esphome.const import (
     PLATFORM_LN882X,
     PLATFORM_RTL87XX,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 
 AUTO_LOAD = ["web_server_base", "ota.web_server"]
 DEPENDENCIES = ["wifi"]
@@ -40,7 +40,7 @@ CONFIG_SCHEMA = cv.All(
 )
 
 
-@coroutine_with_priority(64.0)
+@coroutine_with_priority(CoroPriority.COMMUNICATION)
 async def to_code(config):
     paren = await cg.get_variable(config[CONF_WEB_SERVER_BASE_ID])
 

esphome/components/ccs811/ccs811.cpp

@@ -153,8 +153,8 @@ void CCS811Component::dump_config() {
   ESP_LOGCONFIG(TAG, "CCS811");
   LOG_I2C_DEVICE(this)
   LOG_UPDATE_INTERVAL(this)
-  LOG_SENSOR("  ", "CO2 Sensor", this->co2_)
-  LOG_SENSOR("  ", "TVOC Sensor", this->tvoc_)
+  LOG_SENSOR("  ", "CO2 Sensor", this->co2_);
+  LOG_SENSOR("  ", "TVOC Sensor", this->tvoc_);
   LOG_TEXT_SENSOR("  ", "Firmware Version Sensor", this->version_)
   if (this->baseline_) {
     ESP_LOGCONFIG(TAG, "  Baseline: %04X", *this->baseline_);

esphome/components/ch422g/ch422g.cpp

@@ -91,7 +91,7 @@ bool CH422GComponent::read_inputs_() {
 
 // Write a register. Can't use the standard write_byte() method because there is no single pre-configured i2c address.
 bool CH422GComponent::write_reg_(uint8_t reg, uint8_t value) {
-  auto err = this->bus_->write(reg, &value, 1);
+  auto err = this->bus_->write_readv(reg, &value, 1, nullptr, 0);
   if (err != i2c::ERROR_OK) {
     this->status_set_warning(str_sprintf("write failed for register 0x%X, error %d", reg, err).c_str());
     return false;
@@ -102,7 +102,7 @@ bool CH422GComponent::write_reg_(uint8_t reg, uint8_t value) {
 
 uint8_t CH422GComponent::read_reg_(uint8_t reg) {
   uint8_t value;
-  auto err = this->bus_->read(reg, &value, 1);
+  auto err = this->bus_->write_readv(reg, nullptr, 0, &value, 1);
   if (err != i2c::ERROR_OK) {
     this->status_set_warning(str_sprintf("read failed for register 0x%X, error %d", reg, err).c_str());
     return 0;

esphome/components/climate/__init__.py

@@ -47,7 +47,7 @@ from esphome.const import (
     CONF_VISUAL,
     CONF_WEB_SERVER,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -517,6 +517,6 @@ async def climate_control_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(climate_ns.using)

esphome/components/climate/climate.cpp

@@ -327,7 +327,7 @@ void Climate::add_on_control_callback(std::function<void(ClimateCall &)> &&callb
 static const uint32_t RESTORE_STATE_VERSION = 0x848EA6ADUL;
 
 optional<ClimateDeviceRestoreState> Climate::restore_state_() {
-  this->rtc_ = global_preferences->make_preference<ClimateDeviceRestoreState>(this->get_object_id_hash() ^
+  this->rtc_ = global_preferences->make_preference<ClimateDeviceRestoreState>(this->get_preference_hash() ^
                                                                               RESTORE_STATE_VERSION);
   ClimateDeviceRestoreState recovered{};
   if (!this->rtc_.load(&recovered))

esphome/components/cover/__init__.py

@@ -32,7 +32,7 @@ from esphome.const import (
     DEVICE_CLASS_SHUTTER,
     DEVICE_CLASS_WINDOW,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -228,9 +228,9 @@ async def cover_stop_to_code(config, action_id, template_arg, args):
 
 
 @automation.register_action("cover.toggle", ToggleAction, COVER_ACTION_SCHEMA)
-def cover_toggle_to_code(config, action_id, template_arg, args):
-    paren = yield cg.get_variable(config[CONF_ID])
-    yield cg.new_Pvariable(action_id, template_arg, paren)
+async def cover_toggle_to_code(config, action_id, template_arg, args):
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 COVER_CONTROL_ACTION_SCHEMA = cv.Schema(
@@ -263,6 +263,6 @@ async def cover_control_to_code(config, action_id, template_arg, args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(cover_ns.using)

esphome/components/cover/cover.cpp

@@ -194,7 +194,7 @@ void Cover::publish_state(bool save) {
   }
 }
 optional<CoverRestoreState> Cover::restore_state_() {
-  this->rtc_ = global_preferences->make_preference<CoverRestoreState>(this->get_object_id_hash());
+  this->rtc_ = global_preferences->make_preference<CoverRestoreState>(this->get_preference_hash());
   CoverRestoreState recovered{};
   if (!this->rtc_.load(&recovered))
     return {};

esphome/components/cover/cover.h

@@ -19,8 +19,8 @@ const extern float COVER_CLOSED;
     if (traits_.get_is_assumed_state()) { \
       ESP_LOGCONFIG(TAG, "%s  Assumed State: YES", prefix); \
     } \
-    if (!(obj)->get_device_class().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Device Class: '%s'", prefix, (obj)->get_device_class().c_str()); \
+    if (!(obj)->get_device_class_ref().empty()) { \
+      ESP_LOGCONFIG(TAG, "%s  Device Class: '%s'", prefix, (obj)->get_device_class_ref().c_str()); \
     } \
   }
 

esphome/components/datetime/__init__.py

@@ -21,7 +21,7 @@ from esphome.const import (
     CONF_WEB_SERVER,
     CONF_YEAR,
 )
-from esphome.core import CORE, coroutine_with_priority
+from esphome.core import CORE, CoroPriority, coroutine_with_priority
 from esphome.core.entity_helpers import entity_duplicate_validator, setup_entity
 from esphome.cpp_generator import MockObjClass
 
@@ -172,7 +172,7 @@ async def new_datetime(config, *args):
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(datetime_ns.using)
 

esphome/components/datetime/date_entity.h

@@ -16,8 +16,8 @@ namespace datetime {
 #define LOG_DATETIME_DATE(prefix, type, obj) \
   if ((obj) != nullptr) { \
     ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_icon().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon().c_str()); \
+    if (!(obj)->get_icon_ref().empty()) { \
+      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon_ref().c_str()); \
     } \
   }
 

esphome/components/datetime/datetime_entity.h

@@ -16,8 +16,8 @@ namespace datetime {
 #define LOG_DATETIME_DATETIME(prefix, type, obj) \
   if ((obj) != nullptr) { \
     ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_icon().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon().c_str()); \
+    if (!(obj)->get_icon_ref().empty()) { \
+      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon_ref().c_str()); \
     } \
   }
 

esphome/components/datetime/time_entity.h

@@ -16,8 +16,8 @@ namespace datetime {
 #define LOG_DATETIME_TIME(prefix, type, obj) \
   if ((obj) != nullptr) { \
     ESP_LOGCONFIG(TAG, "%s%s '%s'", prefix, LOG_STR_LITERAL(type), (obj)->get_name().c_str()); \
-    if (!(obj)->get_icon().empty()) { \
-      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon().c_str()); \
+    if (!(obj)->get_icon_ref().empty()) { \
+      ESP_LOGCONFIG(TAG, "%s  Icon: '%s'", prefix, (obj)->get_icon_ref().c_str()); \
     } \
   }
 

esphome/components/deep_sleep/deep_sleep_esp32.cpp

@@ -1,4 +1,5 @@
 #ifdef USE_ESP32
+#include "soc/soc_caps.h"
 #include "driver/gpio.h"
 #include "deep_sleep_component.h"
 #include "esphome/core/log.h"
@@ -83,7 +84,11 @@ void DeepSleepComponent::deep_sleep_() {
     }
     gpio_sleep_set_direction(gpio_pin, GPIO_MODE_INPUT);
     gpio_hold_en(gpio_pin);
+#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
+    // Some ESP32 variants support holding a single GPIO during deep sleep without this function
+    // For those variants, gpio_hold_en() is sufficient to hold the pin state during deep sleep
     gpio_deep_sleep_hold_en();
+#endif
     bool level = !this->wakeup_pin_->is_inverted();
     if (this->wakeup_pin_mode_ == WAKEUP_PIN_MODE_INVERT_WAKEUP && this->wakeup_pin_->digital_read()) {
       level = !level;
@@ -120,7 +125,11 @@ void DeepSleepComponent::deep_sleep_() {
     }
     gpio_sleep_set_direction(gpio_pin, GPIO_MODE_INPUT);
     gpio_hold_en(gpio_pin);
+#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
+    // Some ESP32 variants support holding a single GPIO during deep sleep without this function
+    // For those variants, gpio_hold_en() is sufficient to hold the pin state during deep sleep
     gpio_deep_sleep_hold_en();
+#endif
     bool level = !this->wakeup_pin_->is_inverted();
     if (this->wakeup_pin_mode_ == WAKEUP_PIN_MODE_INVERT_WAKEUP && this->wakeup_pin_->digital_read()) {
       level = !level;

esphome/components/display/__init__.py

@@ -15,7 +15,7 @@ from esphome.const import (
     CONF_UPDATE_INTERVAL,
     SCHEDULER_DONT_RUN,
 )
-from esphome.core import coroutine_with_priority
+from esphome.core import CoroPriority, coroutine_with_priority
 
 IS_PLATFORM_COMPONENT = True
 
@@ -176,7 +176,7 @@ async def display_page_show_to_code(config, action_id, template_arg, args):
     DisplayPageShowNextAction,
     maybe_simple_id(
         {
-            cv.Required(CONF_ID): cv.templatable(cv.use_id(Display)),
+            cv.GenerateID(CONF_ID): cv.templatable(cv.use_id(Display)),
         }
     ),
 )
@@ -190,7 +190,7 @@ async def display_page_show_next_to_code(config, action_id, template_arg, args):
     DisplayPageShowPrevAction,
     maybe_simple_id(
         {
-            cv.Required(CONF_ID): cv.templatable(cv.use_id(Display)),
+            cv.GenerateID(CONF_ID): cv.templatable(cv.use_id(Display)),
         }
     ),
 )
@@ -218,7 +218,7 @@ async def display_is_displaying_page_to_code(config, condition_id, template_arg,
     return var
 
 
-@coroutine_with_priority(100.0)
+@coroutine_with_priority(CoroPriority.CORE)
 async def to_code(config):
     cg.add_global(display_ns.using)
     cg.add_define("USE_DISPLAY")

esphome/components/duty_time/duty_time_sensor.cpp

@@ -41,7 +41,7 @@ void DutyTimeSensor::setup() {
   uint32_t seconds = 0;
 
   if (this->restore_) {
-    this->pref_ = global_preferences->make_preference<uint32_t>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<uint32_t>(this->get_preference_hash());
     this->pref_.load(&seconds);
   }
 

esphome/components/ee895/ee895.cpp

@@ -83,7 +83,7 @@ void EE895Component::write_command_(uint16_t addr, uint16_t reg_cnt) {
   crc16 = calc_crc16_(address, 6);
   address[5] = crc16 & 0xFF;
   address[6] = (crc16 >> 8) & 0xFF;
-  this->write(address, 7, true);
+  this->write(address, 7);
 }
 
 float EE895Component::read_float_() {

esphome/components/esp32/__init__.py

@@ -40,6 +40,7 @@ from esphome.cpp_generator import RawExpression
 import esphome.final_validate as fv
 from esphome.helpers import copy_file_if_changed, mkdir_p, write_file_if_changed
 from esphome.types import ConfigType
+from esphome.writer import clean_cmake_cache
 
 from .boards import BOARDS, STANDARD_BOARDS
 from .const import (  # noqa
@@ -824,8 +825,9 @@ async def to_code(config):
     cg.set_cpp_standard("gnu++20")
     cg.add_build_flag("-DUSE_ESP32")
     cg.add_define("ESPHOME_BOARD", config[CONF_BOARD])
-    cg.add_build_flag(f"-DUSE_ESP32_VARIANT_{config[CONF_VARIANT]}")
-    cg.add_define("ESPHOME_VARIANT", VARIANT_FRIENDLY[config[CONF_VARIANT]])
+    variant = config[CONF_VARIANT]
+    cg.add_build_flag(f"-DUSE_ESP32_VARIANT_{variant}")
+    cg.add_define("ESPHOME_VARIANT", VARIANT_FRIENDLY[variant])
     cg.add_define(ThreadModel.MULTI_ATOMICS)
 
     cg.add_platformio_option("lib_ldf_mode", "off")
@@ -839,6 +841,9 @@ async def to_code(config):
     if conf[CONF_ADVANCED][CONF_IGNORE_EFUSE_CUSTOM_MAC]:
         cg.add_define("USE_ESP32_IGNORE_EFUSE_CUSTOM_MAC")
 
+    for clean_var in ("IDF_PATH", "IDF_TOOLS_PATH"):
+        os.environ.pop(clean_var, None)
+
     add_extra_script(
         "post",
         "post_build.py",
@@ -854,11 +859,7 @@ async def to_code(config):
 
         cg.add_platformio_option("platform_packages", [conf[CONF_SOURCE]])
 
-        # platformio/toolchain-esp32ulp does not support linux_aarch64 yet and has not been updated for over 2 years
-        # This is espressif's own published version which is more up to date.
-        cg.add_platformio_option(
-            "platform_packages", ["espressif/toolchain-esp32ulp@2.35.0-20220830"]
-        )
+        add_idf_sdkconfig_option(f"CONFIG_IDF_TARGET_{variant}", True)
         add_idf_sdkconfig_option(
             f"CONFIG_ESPTOOLPY_FLASHSIZE_{config[CONF_FLASH_SIZE]}", True
         )
@@ -1077,7 +1078,11 @@ def _write_idf_component_yml():
         contents = yaml_util.dump({"dependencies": dependencies})
     else:
         contents = ""
-    write_file_if_changed(yml_path, contents)
+    if write_file_if_changed(yml_path, contents):
+        dependencies_lock = CORE.relative_build_path("dependencies.lock")
+        if os.path.isfile(dependencies_lock):
+            os.remove(dependencies_lock)
+        clean_cmake_cache()
 
 
 # Called by writer.py

esphome/components/esp32/preferences.cpp

@@ -8,6 +8,7 @@
 #include <cinttypes>
 #include <vector>
 #include <string>
+#include <memory>
 
 namespace esphome {
 namespace esp32 {
@@ -156,20 +157,23 @@ class ESP32Preferences : public ESPPreferences {
     return failed == 0;
   }
   bool is_changed(const uint32_t nvs_handle, const NVSData &to_save) {
-    NVSData stored_data{};
     size_t actual_len;
     esp_err_t err = nvs_get_blob(nvs_handle, to_save.key.c_str(), nullptr, &actual_len);
     if (err != 0) {
       ESP_LOGV(TAG, "nvs_get_blob('%s'): %s - the key might not be set yet", to_save.key.c_str(), esp_err_to_name(err));
       return true;
     }
-    stored_data.data.resize(actual_len);
-    err = nvs_get_blob(nvs_handle, to_save.key.c_str(), stored_data.data.data(), &actual_len);
+    // Check size first before allocating memory
+    if (actual_len != to_save.data.size()) {
+      return true;
+    }
+    auto stored_data = std::make_unique<uint8_t[]>(actual_len);
+    err = nvs_get_blob(nvs_handle, to_save.key.c_str(), stored_data.get(), &actual_len);
     if (err != 0) {
       ESP_LOGV(TAG, "nvs_get_blob('%s') failed: %s", to_save.key.c_str(), esp_err_to_name(err));
       return true;
     }
-    return to_save.data != stored_data.data;
+    return memcmp(to_save.data.data(), stored_data.get(), to_save.data.size()) != 0;
   }
 
   bool reset() override {

esphome/components/esp32_ble/__init__.py

@@ -5,9 +5,14 @@ from esphome import automation
 import esphome.codegen as cg
 from esphome.components.esp32 import add_idf_sdkconfig_option, const, get_esp32_variant
 import esphome.config_validation as cv
-from esphome.const import CONF_ENABLE_ON_BOOT, CONF_ESPHOME, CONF_ID, CONF_NAME
+from esphome.const import (
+    CONF_ENABLE_ON_BOOT,
+    CONF_ESPHOME,
+    CONF_ID,
+    CONF_NAME,
+    CONF_NAME_ADD_MAC_SUFFIX,
+)
 from esphome.core import CORE, TimePeriod
-from esphome.core.config import CONF_NAME_ADD_MAC_SUFFIX
 import esphome.final_validate as fv
 
 DEPENDENCIES = ["esp32"]
@@ -280,6 +285,10 @@ async def to_code(config):
             add_idf_sdkconfig_option(
                 "CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT", timeout_seconds
             )
+            # Increase GATT client connection retry count for problematic devices
+            # Default in ESP-IDF is 3, we increase to 10 for better reliability with
+            # low-power/timing-sensitive devices
+            add_idf_sdkconfig_option("CONFIG_BT_GATTC_CONNECT_RETRY_COUNT", 10)
 
         # Set the maximum number of notification registrations
         # This controls how many BLE characteristics can have notifications enabled
@@ -294,6 +303,7 @@ async def to_code(config):
 
     if config[CONF_ADVERTISING]:
         cg.add_define("USE_ESP32_BLE_ADVERTISING")
+        cg.add_define("USE_ESP32_BLE_UUID")
 
 
 @automation.register_condition("ble.enabled", BLEEnabledCondition, cv.Schema({}))

esphome/components/esp32_ble/ble.cpp

@@ -306,7 +306,7 @@ void ESP32BLE::loop() {
       case BLEEvent::GATTS: {
         esp_gatts_cb_event_t event = ble_event->event_.gatts.gatts_event;
         esp_gatt_if_t gatts_if = ble_event->event_.gatts.gatts_if;
-        esp_ble_gatts_cb_param_t *param = ble_event->event_.gatts.gatts_param;
+        esp_ble_gatts_cb_param_t *param = &ble_event->event_.gatts.gatts_param;
         ESP_LOGV(TAG, "gatts_event [esp_gatt_if: %d] - %d", gatts_if, event);
         for (auto *gatts_handler : this->gatts_event_handlers_) {
           gatts_handler->gatts_event_handler(event, gatts_if, param);
@@ -316,7 +316,7 @@ void ESP32BLE::loop() {
       case BLEEvent::GATTC: {
         esp_gattc_cb_event_t event = ble_event->event_.gattc.gattc_event;
         esp_gatt_if_t gattc_if = ble_event->event_.gattc.gattc_if;
-        esp_ble_gattc_cb_param_t *param = ble_event->event_.gattc.gattc_param;
+        esp_ble_gattc_cb_param_t *param = &ble_event->event_.gattc.gattc_param;
         ESP_LOGV(TAG, "gattc_event [esp_gatt_if: %d] - %d", gattc_if, event);
         for (auto *gattc_handler : this->gattc_event_handlers_) {
           gattc_handler->gattc_event_handler(event, gattc_if, param);

esphome/components/esp32_ble/ble_event.h

@@ -3,8 +3,7 @@
 #ifdef USE_ESP32
 
 #include <cstddef>  // for offsetof
-#include <vector>
-
+#include <cstring>  // for memcpy
 #include <esp_gap_ble_api.h>
 #include <esp_gattc_api.h>
 #include <esp_gatts_api.h>
@@ -62,10 +61,24 @@ static_assert(offsetof(esp_ble_gap_cb_param_t, read_rssi_cmpl.rssi) == sizeof(es
 static_assert(offsetof(esp_ble_gap_cb_param_t, read_rssi_cmpl.remote_addr) == sizeof(esp_bt_status_t) + sizeof(int8_t),
               "remote_addr must follow rssi in read_rssi_cmpl");
 
+// Param struct sizes on ESP32
+static constexpr size_t GATTC_PARAM_SIZE = 28;
+static constexpr size_t GATTS_PARAM_SIZE = 32;
+
+// Maximum size for inline storage of data
+// GATTC: 80 - 28 (param) - 8 (other fields) = 44 bytes for data
+// GATTS: 80 - 32 (param) - 8 (other fields) = 40 bytes for data
+static constexpr size_t GATTC_INLINE_DATA_SIZE = 44;
+static constexpr size_t GATTS_INLINE_DATA_SIZE = 40;
+
+// Verify param struct sizes
+static_assert(sizeof(esp_ble_gattc_cb_param_t) == GATTC_PARAM_SIZE, "GATTC param size unexpected");
+static_assert(sizeof(esp_ble_gatts_cb_param_t) == GATTS_PARAM_SIZE, "GATTS param size unexpected");
+
 // Received GAP, GATTC and GATTS events are only queued, and get processed in the main loop().
 // This class stores each event with minimal memory usage.
-// GAP events (99% of traffic) don't have the vector overhead.
-// GATTC/GATTS events use heap allocation for their param and data.
+// GAP events (99% of traffic) don't have the heap allocation overhead.
+// GATTC/GATTS events use heap allocation for their param and inline storage for small data.
 //
 // Event flow:
 // 1. ESP-IDF BLE stack calls our static handlers in the BLE task context
@@ -112,21 +125,21 @@ class BLEEvent {
     this->init_gap_data_(e, p);
   }
 
-  // Constructor for GATTC events - uses heap allocation
-  // IMPORTANT: The heap allocation is REQUIRED and must not be removed as an optimization.
-  // The param pointer from ESP-IDF is only valid during the callback execution.
-  // Since BLE events are processed asynchronously in the main loop, we must create
-  // our own copy to ensure the data remains valid until the event is processed.
+  // Constructor for GATTC events - param stored inline, data may use heap
+  // IMPORTANT: We MUST copy the param struct because the pointer from ESP-IDF
+  // is only valid during the callback execution. Since BLE events are processed
+  // asynchronously in the main loop, we store our own copy inline to ensure
+  // the data remains valid until the event is processed.
   BLEEvent(esp_gattc_cb_event_t e, esp_gatt_if_t i, esp_ble_gattc_cb_param_t *p) {
     this->type_ = GATTC;
     this->init_gattc_data_(e, i, p);
   }
 
-  // Constructor for GATTS events - uses heap allocation
-  // IMPORTANT: The heap allocation is REQUIRED and must not be removed as an optimization.
-  // The param pointer from ESP-IDF is only valid during the callback execution.
-  // Since BLE events are processed asynchronously in the main loop, we must create
-  // our own copy to ensure the data remains valid until the event is processed.
+  // Constructor for GATTS events - param stored inline, data may use heap
+  // IMPORTANT: We MUST copy the param struct because the pointer from ESP-IDF
+  // is only valid during the callback execution. Since BLE events are processed
+  // asynchronously in the main loop, we store our own copy inline to ensure
+  // the data remains valid until the event is processed.
   BLEEvent(esp_gatts_cb_event_t e, esp_gatt_if_t i, esp_ble_gatts_cb_param_t *p) {
     this->type_ = GATTS;
     this->init_gatts_data_(e, i, p);
@@ -136,25 +149,32 @@ class BLEEvent {
   ~BLEEvent() { this->release(); }
 
   // Default constructor for pre-allocation in pool
-  BLEEvent() : type_(GAP) {}
+  BLEEvent() : event_{}, type_(GAP) {}
 
   // Invoked on return to EventPool - clean up any heap-allocated data
   void release() {
-    if (this->type_ == GAP) {
-      return;
-    }
-    if (this->type_ == GATTC) {
-      delete this->event_.gattc.gattc_param;
-      delete this->event_.gattc.data;
-      this->event_.gattc.gattc_param = nullptr;
-      this->event_.gattc.data = nullptr;
-      return;
-    }
-    if (this->type_ == GATTS) {
-      delete this->event_.gatts.gatts_param;
-      delete this->event_.gatts.data;
-      this->event_.gatts.gatts_param = nullptr;
-      this->event_.gatts.data = nullptr;
+    switch (this->type_) {
+      case GAP:
+        // GAP events don't have heap allocations
+        break;
+      case GATTC:
+        // Param is now stored inline, only delete heap data if it was heap-allocated
+        if (!this->event_.gattc.is_inline && this->event_.gattc.data.heap_data != nullptr) {
+          delete[] this->event_.gattc.data.heap_data;
+        }
+        // Clear critical fields to prevent issues if type changes
+        this->event_.gattc.is_inline = false;
+        this->event_.gattc.data.heap_data = nullptr;
+        break;
+      case GATTS:
+        // Param is now stored inline, only delete heap data if it was heap-allocated
+        if (!this->event_.gatts.is_inline && this->event_.gatts.data.heap_data != nullptr) {
+          delete[] this->event_.gatts.data.heap_data;
+        }
+        // Clear critical fields to prevent issues if type changes
+        this->event_.gatts.is_inline = false;
+        this->event_.gatts.data.heap_data = nullptr;
+        break;
     }
   }
 
@@ -206,20 +226,30 @@ class BLEEvent {
 
     // NOLINTNEXTLINE(readability-identifier-naming)
     struct gattc_event {
-      esp_gattc_cb_event_t gattc_event;
-      esp_gatt_if_t gattc_if;
-      esp_ble_gattc_cb_param_t *gattc_param;  // Heap-allocated
-      std::vector<uint8_t> *data;             // Heap-allocated
-    } gattc;                                  // 16 bytes (pointers only)
+      esp_ble_gattc_cb_param_t gattc_param;  // Stored inline (28 bytes)
+      esp_gattc_cb_event_t gattc_event;      // 4 bytes
+      union {
+        uint8_t *heap_data;                           // 4 bytes when heap-allocated
+        uint8_t inline_data[GATTC_INLINE_DATA_SIZE];  // 44 bytes when stored inline
+      } data;                                         // 44 bytes total
+      uint16_t data_len;                              // 2 bytes
+      esp_gatt_if_t gattc_if;                         // 1 byte
+      bool is_inline;                                 // 1 byte - true when data is stored inline
+    } gattc;                                          // Total: 80 bytes
 
     // NOLINTNEXTLINE(readability-identifier-naming)
     struct gatts_event {
-      esp_gatts_cb_event_t gatts_event;
-      esp_gatt_if_t gatts_if;
-      esp_ble_gatts_cb_param_t *gatts_param;  // Heap-allocated
-      std::vector<uint8_t> *data;             // Heap-allocated
-    } gatts;                                  // 16 bytes (pointers only)
-  } event_;                                   // 80 bytes
+      esp_ble_gatts_cb_param_t gatts_param;  // Stored inline (32 bytes)
+      esp_gatts_cb_event_t gatts_event;      // 4 bytes
+      union {
+        uint8_t *heap_data;                           // 4 bytes when heap-allocated
+        uint8_t inline_data[GATTS_INLINE_DATA_SIZE];  // 40 bytes when stored inline
+      } data;                                         // 40 bytes total
+      uint16_t data_len;                              // 2 bytes
+      esp_gatt_if_t gatts_if;                         // 1 byte
+      bool is_inline;                                 // 1 byte - true when data is stored inline
+    } gatts;                                          // Total: 80 bytes
+  } event_;                                           // 80 bytes
 
   ble_event_t type_;
 
@@ -233,6 +263,29 @@ class BLEEvent {
   const esp_ble_sec_t &security() const { return event_.gap.security; }
 
  private:
+  // Helper to copy data with inline storage optimization
+  template<typename EventStruct, size_t InlineSize>
+  void copy_data_with_inline_storage_(EventStruct &event, const uint8_t *src_data, uint16_t len,
+                                      uint8_t **param_value_ptr) {
+    event.data_len = len;
+    if (len > 0) {
+      if (len <= InlineSize) {
+        event.is_inline = true;
+        memcpy(event.data.inline_data, src_data, len);
+        *param_value_ptr = event.data.inline_data;
+      } else {
+        event.is_inline = false;
+        event.data.heap_data = new uint8_t[len];
+        memcpy(event.data.heap_data, src_data, len);
+        *param_value_ptr = event.data.heap_data;
+      }
+    } else {
+      event.is_inline = false;
+      event.data.heap_data = nullptr;
+      *param_value_ptr = nullptr;
+    }
+  }
+
   // Initialize GAP event data
   void init_gap_data_(esp_gap_ble_cb_event_t e, esp_ble_gap_cb_param_t *p) {
     this->event_.gap.gap_event = e;
@@ -317,35 +370,38 @@ class BLEEvent {
     this->event_.gattc.gattc_if = i;
 
     if (p == nullptr) {
-      this->event_.gattc.gattc_param = nullptr;
-      this->event_.gattc.data = nullptr;
+      // Zero out the param struct when null
+      memset(&this->event_.gattc.gattc_param, 0, sizeof(this->event_.gattc.gattc_param));
+      this->event_.gattc.is_inline = false;
+      this->event_.gattc.data.heap_data = nullptr;
+      this->event_.gattc.data_len = 0;
       return;  // Invalid event, but we can't log in header file
     }
 
-    // Heap-allocate param and data
-    // Heap allocation is used because GATTC/GATTS events are rare (<1% of events)
-    // while GAP events (99%) are stored inline to minimize memory usage
-    // IMPORTANT: This heap allocation provides clear ownership semantics:
-    // - The BLEEvent owns the allocated memory for its lifetime
-    // - The data remains valid from the BLE callback context until processed in the main loop
-    // - Without this copy, we'd have use-after-free bugs as ESP-IDF reuses the callback memory
-    this->event_.gattc.gattc_param = new esp_ble_gattc_cb_param_t(*p);
+    // Copy param struct inline (no heap allocation!)
+    // GATTC/GATTS events are rare (<1% of events) but we can still store them inline
+    // along with small data payloads, eliminating all heap allocations for typical BLE operations
+    // CRITICAL: This copy is REQUIRED for memory safety - the ESP-IDF param pointer
+    // is only valid during the callback and will be reused/freed after we return
+    this->event_.gattc.gattc_param = *p;
 
     // Copy data for events that need it
     // The param struct contains pointers (e.g., notify.value) that point to temporary buffers.
     // We must copy this data to ensure it remains valid when the event is processed later.
     switch (e) {
       case ESP_GATTC_NOTIFY_EVT:
-        this->event_.gattc.data = new std::vector<uint8_t>(p->notify.value, p->notify.value + p->notify.value_len);
-        this->event_.gattc.gattc_param->notify.value = this->event_.gattc.data->data();
+        copy_data_with_inline_storage_<decltype(this->event_.gattc), GATTC_INLINE_DATA_SIZE>(
+            this->event_.gattc, p->notify.value, p->notify.value_len, &this->event_.gattc.gattc_param.notify.value);
         break;
       case ESP_GATTC_READ_CHAR_EVT:
       case ESP_GATTC_READ_DESCR_EVT:
-        this->event_.gattc.data = new std::vector<uint8_t>(p->read.value, p->read.value + p->read.value_len);
-        this->event_.gattc.gattc_param->read.value = this->event_.gattc.data->data();
+        copy_data_with_inline_storage_<decltype(this->event_.gattc), GATTC_INLINE_DATA_SIZE>(
+            this->event_.gattc, p->read.value, p->read.value_len, &this->event_.gattc.gattc_param.read.value);
         break;
       default:
-        this->event_.gattc.data = nullptr;
+        this->event_.gattc.is_inline = false;
+        this->event_.gattc.data.heap_data = nullptr;
+        this->event_.gattc.data_len = 0;
         break;
     }
   }
@@ -356,30 +412,33 @@ class BLEEvent {
     this->event_.gatts.gatts_if = i;
 
     if (p == nullptr) {
-      this->event_.gatts.gatts_param = nullptr;
-      this->event_.gatts.data = nullptr;
+      // Zero out the param struct when null
+      memset(&this->event_.gatts.gatts_param, 0, sizeof(this->event_.gatts.gatts_param));
+      this->event_.gatts.is_inline = false;
+      this->event_.gatts.data.heap_data = nullptr;
+      this->event_.gatts.data_len = 0;
       return;  // Invalid event, but we can't log in header file
     }
 
-    // Heap-allocate param and data
-    // Heap allocation is used because GATTC/GATTS events are rare (<1% of events)
-    // while GAP events (99%) are stored inline to minimize memory usage
-    // IMPORTANT: This heap allocation provides clear ownership semantics:
-    // - The BLEEvent owns the allocated memory for its lifetime
-    // - The data remains valid from the BLE callback context until processed in the main loop
-    // - Without this copy, we'd have use-after-free bugs as ESP-IDF reuses the callback memory
-    this->event_.gatts.gatts_param = new esp_ble_gatts_cb_param_t(*p);
+    // Copy param struct inline (no heap allocation!)
+    // GATTC/GATTS events are rare (<1% of events) but we can still store them inline
+    // along with small data payloads, eliminating all heap allocations for typical BLE operations
+    // CRITICAL: This copy is REQUIRED for memory safety - the ESP-IDF param pointer
+    // is only valid during the callback and will be reused/freed after we return
+    this->event_.gatts.gatts_param = *p;
 
     // Copy data for events that need it
     // The param struct contains pointers (e.g., write.value) that point to temporary buffers.
     // We must copy this data to ensure it remains valid when the event is processed later.
     switch (e) {
       case ESP_GATTS_WRITE_EVT:
-        this->event_.gatts.data = new std::vector<uint8_t>(p->write.value, p->write.value + p->write.len);
-        this->event_.gatts.gatts_param->write.value = this->event_.gatts.data->data();
+        copy_data_with_inline_storage_<decltype(this->event_.gatts), GATTS_INLINE_DATA_SIZE>(
+            this->event_.gatts, p->write.value, p->write.len, &this->event_.gatts.gatts_param.write.value);
         break;
       default:
-        this->event_.gatts.data = nullptr;
+        this->event_.gatts.is_inline = false;
+        this->event_.gatts.data.heap_data = nullptr;
+        this->event_.gatts.data_len = 0;
         break;
     }
   }
@@ -389,6 +448,15 @@ class BLEEvent {
 // The gap member in the union should be 80 bytes (including the gap_event enum)
 static_assert(sizeof(decltype(((BLEEvent *) nullptr)->event_.gap)) <= 80, "gap_event struct has grown beyond 80 bytes");
 
+// Verify GATTC and GATTS structs don't exceed GAP struct size
+// This ensures the union size is determined by GAP (the most common event type)
+static_assert(sizeof(decltype(((BLEEvent *) nullptr)->event_.gattc)) <=
+                  sizeof(decltype(((BLEEvent *) nullptr)->event_.gap)),
+              "gattc_event struct exceeds gap_event size - union size would increase");
+static_assert(sizeof(decltype(((BLEEvent *) nullptr)->event_.gatts)) <=
+                  sizeof(decltype(((BLEEvent *) nullptr)->event_.gap)),
+              "gatts_event struct exceeds gap_event size - union size would increase");
+
 // Verify esp_ble_sec_t fits within our union
 static_assert(sizeof(esp_ble_sec_t) <= 73, "esp_ble_sec_t is larger than BLEScanResult");
 

esphome/components/esp32_ble/ble_uuid.cpp

@@ -1,6 +1,7 @@
 #include "ble_uuid.h"
 
 #ifdef USE_ESP32
+#ifdef USE_ESP32_BLE_UUID
 
 #include <cstring>
 #include <cstdio>
@@ -190,4 +191,5 @@ std::string ESPBTUUID::to_string() const {
 
 }  // namespace esphome::esp32_ble
 
-#endif
+#endif  // USE_ESP32_BLE_UUID
+#endif  // USE_ESP32

esphome/components/esp32_ble/ble_uuid.h

@@ -1,9 +1,11 @@
 #pragma once
 
+#include "esphome/core/defines.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
 
 #ifdef USE_ESP32
+#ifdef USE_ESP32_BLE_UUID
 
 #include <string>
 #include <esp_bt_defs.h>
@@ -42,4 +44,5 @@ class ESPBTUUID {
 
 }  // namespace esphome::esp32_ble
 
-#endif
+#endif  // USE_ESP32_BLE_UUID
+#endif  // USE_ESP32

esphome/components/esp32_ble_beacon/__init__.py

@@ -65,6 +65,8 @@ FINAL_VALIDATE_SCHEMA = esp32_ble.validate_variant
 
 
 async def to_code(config):
+    cg.add_define("USE_ESP32_BLE_UUID")
+
     uuid = config[CONF_UUID].hex
     uuid_arr = [
         cg.RawExpression(f"0x{uuid[i : i + 2]}") for i in range(0, len(uuid), 2)

esphome/components/esp32_ble_client/ble_client_base.cpp

@@ -7,6 +7,7 @@
 
 #include <esp_gap_ble_api.h>
 #include <esp_gatt_defs.h>
+#include <esp_gattc_api.h>
 
 namespace esphome::esp32_ble_client {
 
@@ -92,7 +93,7 @@ bool BLEClientBase::parse_device(const espbt::ESPBTDevice &device) {
     return false;
   if (this->address_ == 0 || device.address_uint64() != this->address_)
     return false;
-  if (this->state_ != espbt::ClientState::IDLE && this->state_ != espbt::ClientState::SEARCHING)
+  if (this->state_ != espbt::ClientState::IDLE)
     return false;
 
   this->log_event_("Found device");
@@ -111,43 +112,19 @@ void BLEClientBase::connect() {
            this->remote_addr_type_);
   this->paired_ = false;
 
-  // Set preferred connection parameters before connecting
-  // Use FAST for all V3 connections (better latency and reliability)
-  // Use MEDIUM for V1/legacy connections (balanced performance)
-  uint16_t min_interval, max_interval, timeout;
-  const char *param_type;
-
-  if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE ||
-      this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-    min_interval = FAST_MIN_CONN_INTERVAL;
-    max_interval = FAST_MAX_CONN_INTERVAL;
-    timeout = FAST_CONN_TIMEOUT;
-    param_type = "fast";
-  } else {
-    min_interval = MEDIUM_MIN_CONN_INTERVAL;
-    max_interval = MEDIUM_MAX_CONN_INTERVAL;
-    timeout = MEDIUM_CONN_TIMEOUT;
-    param_type = "medium";
+  // Determine connection parameters based on connection type
+  if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
+    // V3 without cache needs fast params for service discovery
+    this->set_conn_params_(FAST_MIN_CONN_INTERVAL, FAST_MAX_CONN_INTERVAL, 0, FAST_CONN_TIMEOUT, "fast");
+  } else if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
+    // V3 with cache can use medium params
+    this->set_conn_params_(MEDIUM_MIN_CONN_INTERVAL, MEDIUM_MAX_CONN_INTERVAL, 0, MEDIUM_CONN_TIMEOUT, "medium");
   }
+  // For V1/Legacy, don't set params - use ESP-IDF defaults
 
-  auto param_ret = esp_ble_gap_set_prefer_conn_params(this->remote_bda_, min_interval, max_interval,
-                                                      0,  // latency: 0
-                                                      timeout);
-  if (param_ret != ESP_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gap_set_prefer_conn_params failed: %d", this->connection_index_,
-             this->address_str_.c_str(), param_ret);
-  } else {
-    this->log_connection_params_(param_type);
-  }
-
-  // Now open the connection
+  // Open the connection
   auto ret = esp_ble_gattc_open(this->gattc_if_, this->remote_bda_, this->remote_addr_type_, true);
-  if (ret) {
-    this->log_gattc_warning_("esp_ble_gattc_open", ret);
-    this->set_state(espbt::ClientState::IDLE);
-  } else {
-    this->set_state(espbt::ClientState::CONNECTING);
-  }
+  this->handle_connection_result_(ret);
 }
 
 esp_err_t BLEClientBase::pair() { return esp_ble_set_encryption(this->remote_bda_, ESP_BLE_SEC_ENCRYPT); }
@@ -159,7 +136,7 @@ void BLEClientBase::disconnect() {
     return;
   }
   if (this->state_ == espbt::ClientState::CONNECTING || this->conn_id_ == UNSET_CONN_ID) {
-    ESP_LOGW(TAG, "[%d] [%s] Disconnecting before connected, disconnect scheduled.", this->connection_index_,
+    ESP_LOGD(TAG, "[%d] [%s] Disconnect before connected, disconnect scheduled", this->connection_index_,
              this->address_str_.c_str());
     this->want_disconnect_ = true;
     return;
@@ -172,13 +149,11 @@ void BLEClientBase::unconditional_disconnect() {
   ESP_LOGI(TAG, "[%d] [%s] Disconnecting (conn_id: %d).", this->connection_index_, this->address_str_.c_str(),
            this->conn_id_);
   if (this->state_ == espbt::ClientState::DISCONNECTING) {
-    ESP_LOGE(TAG, "[%d] [%s] Tried to disconnect while already disconnecting.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_error_("Already disconnecting");
     return;
   }
   if (this->conn_id_ == UNSET_CONN_ID) {
-    ESP_LOGE(TAG, "[%d] [%s] No connection ID set, cannot disconnect.", this->connection_index_,
-             this->address_str_.c_str());
+    this->log_error_("conn id unset, cannot disconnect");
     return;
   }
   auto err = esp_ble_gattc_close(this->gattc_if_, this->conn_id_);
@@ -193,8 +168,7 @@ void BLEClientBase::unconditional_disconnect() {
     this->log_gattc_warning_("esp_ble_gattc_close", err);
   }
 
-  if (this->state_ == espbt::ClientState::SEARCHING || this->state_ == espbt::ClientState::READY_TO_CONNECT ||
-      this->state_ == espbt::ClientState::DISCOVERED) {
+  if (this->state_ == espbt::ClientState::READY_TO_CONNECT || this->state_ == espbt::ClientState::DISCOVERED) {
     this->set_address(0);
     this->set_state(espbt::ClientState::IDLE);
   } else {
@@ -234,17 +208,51 @@ void BLEClientBase::log_connection_params_(const char *param_type) {
   ESP_LOGD(TAG, "[%d] [%s] %s conn params", this->connection_index_, this->address_str_.c_str(), param_type);
 }
 
-void BLEClientBase::restore_medium_conn_params_() {
-  // Restore to medium connection parameters after initial connection phase
-  // This balances performance with bandwidth usage for normal operation
+void BLEClientBase::handle_connection_result_(esp_err_t ret) {
+  if (ret) {
+    this->log_gattc_warning_("esp_ble_gattc_open", ret);
+    this->set_state(espbt::ClientState::IDLE);
+  } else {
+    this->set_state(espbt::ClientState::CONNECTING);
+  }
+}
+
+void BLEClientBase::log_error_(const char *message) {
+  ESP_LOGE(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
+}
+
+void BLEClientBase::log_error_(const char *message, int code) {
+  ESP_LOGE(TAG, "[%d] [%s] %s=%d", this->connection_index_, this->address_str_.c_str(), message, code);
+}
+
+void BLEClientBase::log_warning_(const char *message) {
+  ESP_LOGW(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
+}
+
+void BLEClientBase::update_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency,
+                                        uint16_t timeout, const char *param_type) {
   esp_ble_conn_update_params_t conn_params = {{0}};
   memcpy(conn_params.bda, this->remote_bda_, sizeof(esp_bd_addr_t));
-  conn_params.min_int = MEDIUM_MIN_CONN_INTERVAL;
-  conn_params.max_int = MEDIUM_MAX_CONN_INTERVAL;
-  conn_params.latency = 0;
-  conn_params.timeout = MEDIUM_CONN_TIMEOUT;
-  this->log_connection_params_("medium");
-  esp_ble_gap_update_conn_params(&conn_params);
+  conn_params.min_int = min_interval;
+  conn_params.max_int = max_interval;
+  conn_params.latency = latency;
+  conn_params.timeout = timeout;
+  this->log_connection_params_(param_type);
+  esp_err_t err = esp_ble_gap_update_conn_params(&conn_params);
+  if (err != ESP_OK) {
+    this->log_gattc_warning_("esp_ble_gap_update_conn_params", err);
+  }
+}
+
+void BLEClientBase::set_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency, uint16_t timeout,
+                                     const char *param_type) {
+  // Set preferred connection parameters before connecting
+  // These will be used when establishing the connection
+  this->log_connection_params_(param_type);
+  esp_err_t err = esp_ble_gap_set_prefer_conn_params(this->remote_bda_, min_interval, max_interval, latency, timeout);
+  if (err != ESP_OK) {
+    this->log_gattc_warning_("esp_ble_gap_set_prefer_conn_params", err);
+  }
 }
 
 bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t esp_gattc_if,
@@ -264,8 +272,7 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
                  this->app_id);
         this->gattc_if_ = esp_gattc_if;
       } else {
-        ESP_LOGE(TAG, "[%d] [%s] gattc app registration failed id=%d code=%d", this->connection_index_,
-                 this->address_str_.c_str(), param->reg.app_id, param->reg.status);
+        this->log_error_("gattc app registration failed status", param->reg.status);
         this->status_ = param->reg.status;
         this->mark_failed();
       }
@@ -277,11 +284,21 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       this->log_gattc_event_("OPEN");
       // conn_id was already set in ESP_GATTC_CONNECT_EVT
       this->service_count_ = 0;
+
+      // ESP-IDF's BLE stack may send ESP_GATTC_OPEN_EVT after esp_ble_gattc_open() returns an
+      // error, if the error occurred at the BTA/GATT layer. This can result in the event
+      // arriving after we've already transitioned to IDLE state.
+      if (this->state_ == espbt::ClientState::IDLE) {
+        ESP_LOGD(TAG, "[%d] [%s] ESP_GATTC_OPEN_EVT in IDLE state (status=%d), ignoring", this->connection_index_,
+                 this->address_str_.c_str(), param->open.status);
+        break;
+      }
+
       if (this->state_ != espbt::ClientState::CONNECTING) {
         // This should not happen but lets log it in case it does
         // because it means we have a bad assumption about how the
         // ESP BT stack works.
-        ESP_LOGE(TAG, "[%d] [%s] Got ESP_GATTC_OPEN_EVT while in %s state, status=%d", this->connection_index_,
+        ESP_LOGE(TAG, "[%d] [%s] ESP_GATTC_OPEN_EVT in %s state (status=%d)", this->connection_index_,
                  this->address_str_.c_str(), espbt::client_state_to_string(this->state_), param->open.status);
       }
       if (param->open.status != ESP_GATT_OK && param->open.status != ESP_GATT_ALREADY_OPEN) {
@@ -301,13 +318,14 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       this->set_state(espbt::ClientState::CONNECTED);
       ESP_LOGI(TAG, "[%d] [%s] Connection open", this->connection_index_, this->address_str_.c_str());
       if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-        // Restore to medium connection parameters for cached connections too
-        this->restore_medium_conn_params_();
+        // Cached connections already connected with medium parameters, no update needed
         // only set our state, subclients might have more stuff to do yet.
         this->state_ = espbt::ClientState::ESTABLISHED;
         break;
       }
-      ESP_LOGD(TAG, "[%d] [%s] Searching for services", this->connection_index_, this->address_str_.c_str());
+      // For V3_WITHOUT_CACHE, we already set fast params before connecting
+      // No need to update them again here
+      this->log_event_("Searching for services");
       esp_ble_gattc_search_service(esp_gattc_if, param->cfg_mtu.conn_id, nullptr);
       break;
     }
@@ -332,8 +350,7 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       // Check if we were disconnected while waiting for service discovery
       if (param->disconnect.reason == ESP_GATT_CONN_TERMINATE_PEER_USER &&
           this->state_ == espbt::ClientState::CONNECTED) {
-        ESP_LOGW(TAG, "[%d] [%s] Disconnected by remote during service discovery", this->connection_index_,
-                 this->address_str_.c_str());
+        this->log_warning_("Remote closed during discovery");
       } else {
         ESP_LOGD(TAG, "[%d] [%s] ESP_GATTC_DISCONNECT_EVT, reason 0x%02x", this->connection_index_,
                  this->address_str_.c_str(), param->disconnect.reason);
@@ -389,12 +406,11 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       if (this->conn_id_ != param->search_cmpl.conn_id)
         return false;
       this->log_gattc_event_("SEARCH_CMPL");
-      // For V3 connections, restore to medium connection parameters after service discovery
+      // For V3_WITHOUT_CACHE, switch back to medium connection parameters after service discovery
       // This balances performance with bandwidth usage after the critical discovery phase
-      if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE ||
-          this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-        this->restore_medium_conn_params_();
-      } else {
+      if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
+        this->update_conn_params_(MEDIUM_MIN_CONN_INTERVAL, MEDIUM_MAX_CONN_INTERVAL, 0, MEDIUM_CONN_TIMEOUT, "medium");
+      } else if (this->connection_type_ != espbt::ConnectionType::V3_WITH_CACHE) {
 #ifdef USE_ESP32_BLE_DEVICE
         for (auto &svc : this->services_) {
           ESP_LOGV(TAG, "[%d] [%s] Service UUID: %s", this->connection_index_, this->address_str_.c_str(),
@@ -478,6 +494,11 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       break;
     }
 
+    case ESP_GATTC_UNREG_FOR_NOTIFY_EVT: {
+      this->log_gattc_event_("UNREG_FOR_NOTIFY");
+      break;
+    }
+
     default:
       // ideally would check all other events for matching conn_id
       ESP_LOGD(TAG, "[%d] [%s] Event %d", this->connection_index_, this->address_str_.c_str(), event);
@@ -506,16 +527,14 @@ void BLEClientBase::gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_
         return;
       esp_bd_addr_t bd_addr;
       memcpy(bd_addr, param->ble_security.auth_cmpl.bd_addr, sizeof(esp_bd_addr_t));
-      ESP_LOGI(TAG, "[%d] [%s] auth complete. remote BD_ADDR: %s", this->connection_index_, this->address_str_.c_str(),
+      ESP_LOGI(TAG, "[%d] [%s] auth complete addr: %s", this->connection_index_, this->address_str_.c_str(),
                format_hex(bd_addr, 6).c_str());
       if (!param->ble_security.auth_cmpl.success) {
-        ESP_LOGE(TAG, "[%d] [%s] auth fail reason = 0x%x", this->connection_index_, this->address_str_.c_str(),
-                 param->ble_security.auth_cmpl.fail_reason);
+        this->log_error_("auth fail reason", param->ble_security.auth_cmpl.fail_reason);
       } else {
         this->paired_ = true;
-        ESP_LOGD(TAG, "[%d] [%s] auth success. address type = %d auth mode = %d", this->connection_index_,
-                 this->address_str_.c_str(), param->ble_security.auth_cmpl.addr_type,
-                 param->ble_security.auth_cmpl.auth_mode);
+        ESP_LOGD(TAG, "[%d] [%s] auth success type = %d mode = %d", this->connection_index_, this->address_str_.c_str(),
+                 param->ble_security.auth_cmpl.addr_type, param->ble_security.auth_cmpl.auth_mode);
       }
       break;