Merge pull request #5426 from esphome/bump-2023.9.0b3

2023.9.0b3

docker/Dockerfile

@@ -29,7 +29,8 @@ RUN \
         curl=7.74.0-1.3+deb11u7 \
         openssh-client=1:8.4p1-5+deb11u1 \
         python3-cffi=1.14.5-1 \
-        libcairo2=1.16.0-5; \
+        libcairo2=1.16.0-5 \
+        patch=2.7.6-7; \
     if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
         apt-get install -y --no-install-recommends \
           build-essential=12.9 \

esphome/components/dallas/sensor.py

@@ -24,7 +24,7 @@ CONFIG_SCHEMA = cv.All(
     ).extend(
         {
             cv.GenerateID(CONF_DALLAS_ID): cv.use_id(DallasComponent),
-            cv.Optional(CONF_ADDRESS): cv.hex_int,
+            cv.Optional(CONF_ADDRESS): cv.hex_uint64_t,
             cv.Optional(CONF_INDEX): cv.positive_int,
             cv.Optional(CONF_RESOLUTION, default=12): cv.int_range(min=9, max=12),
         }

esphome/components/http_request/http_request.h

@@ -80,8 +80,6 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
   TEMPLATABLE_VALUE(std::string, url)
   TEMPLATABLE_VALUE(const char *, method)
   TEMPLATABLE_VALUE(std::string, body)
-  TEMPLATABLE_VALUE(const char *, useragent)
-  TEMPLATABLE_VALUE(uint16_t, timeout)
 
   void add_header(const char *key, TemplatableValue<const char *, Ts...> value) { this->headers_.insert({key, value}); }
 
@@ -105,25 +103,18 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
       auto f = std::bind(&HttpRequestSendAction<Ts...>::encode_json_func_, this, x..., std::placeholders::_1);
       this->parent_->set_body(json::build_json(f));
     }
-    if (this->useragent_.has_value()) {
-      this->parent_->set_useragent(this->useragent_.value(x...));
-    }
-    if (this->timeout_.has_value()) {
-      this->parent_->set_timeout(this->timeout_.value(x...));
-    }
-    if (!this->headers_.empty()) {
-      std::list<Header> headers;
-      for (const auto &item : this->headers_) {
-        auto val = item.second;
-        Header header;
-        header.name = item.first;
-        header.value = val.value(x...);
-        headers.push_back(header);
-      }
-      this->parent_->set_headers(headers);
+    std::list<Header> headers;
+    for (const auto &item : this->headers_) {
+      auto val = item.second;
+      Header header;
+      header.name = item.first;
+      header.value = val.value(x...);
+      headers.push_back(header);
     }
+    this->parent_->set_headers(headers);
     this->parent_->send(this->response_triggers_);
     this->parent_->close();
+    this->parent_->set_body("");
   }
 
  protected:

esphome/components/matrix_keypad/__init__.py

@@ -21,6 +21,7 @@ CONF_COLUMNS = "columns"
 CONF_KEYS = "keys"
 CONF_DEBOUNCE_TIME = "debounce_time"
 CONF_HAS_DIODES = "has_diodes"
+CONF_HAS_PULLDOWNS = "has_pulldowns"
 
 
 def check_keys(obj):
@@ -45,6 +46,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_KEYS): cv.string,
             cv.Optional(CONF_DEBOUNCE_TIME, default=1): cv.int_range(min=1, max=100),
             cv.Optional(CONF_HAS_DIODES): cv.boolean,
+            cv.Optional(CONF_HAS_PULLDOWNS): cv.boolean,
         }
     ),
     check_keys,
@@ -69,3 +71,5 @@ async def to_code(config):
     cg.add(var.set_debounce_time(config[CONF_DEBOUNCE_TIME]))
     if CONF_HAS_DIODES in config:
         cg.add(var.set_has_diodes(config[CONF_HAS_DIODES]))
+    if CONF_HAS_PULLDOWNS in config:
+        cg.add(var.set_has_pulldowns(config[CONF_HAS_PULLDOWNS]))

esphome/components/matrix_keypad/matrix_keypad.cpp

@@ -11,11 +11,16 @@ void MatrixKeypad::setup() {
     if (!has_diodes_) {
       pin->pin_mode(gpio::FLAG_INPUT);
     } else {
-      pin->digital_write(true);
+      pin->digital_write(!has_pulldowns_);
+    }
+  }
+  for (auto *pin : this->columns_) {
+    if (has_pulldowns_) {
+      pin->pin_mode(gpio::FLAG_INPUT);
+    } else {
+      pin->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
     }
   }
-  for (auto *pin : this->columns_)
-    pin->pin_mode(gpio::FLAG_INPUT | gpio::FLAG_PULLUP);
 }
 
 void MatrixKeypad::loop() {
@@ -28,9 +33,9 @@ void MatrixKeypad::loop() {
   for (auto *row : this->rows_) {
     if (!has_diodes_)
       row->pin_mode(gpio::FLAG_OUTPUT);
-    row->digital_write(false);
+    row->digital_write(has_pulldowns_);
     for (auto *col : this->columns_) {
-      if (!col->digital_read()) {
+      if (col->digital_read() == has_pulldowns_) {
         if (key != -1) {
           error = true;
         } else {
@@ -39,7 +44,7 @@ void MatrixKeypad::loop() {
       }
       pos++;
     }
-    row->digital_write(true);
+    row->digital_write(!has_pulldowns_);
     if (!has_diodes_)
       row->pin_mode(gpio::FLAG_INPUT);
   }

esphome/components/matrix_keypad/matrix_keypad.h

@@ -28,6 +28,7 @@ class MatrixKeypad : public key_provider::KeyProvider, public Component {
   void set_keys(std::string keys) { keys_ = std::move(keys); };
   void set_debounce_time(int debounce_time) { debounce_time_ = debounce_time; };
   void set_has_diodes(int has_diodes) { has_diodes_ = has_diodes; };
+  void set_has_pulldowns(int has_pulldowns) { has_pulldowns_ = has_pulldowns; };
 
   void register_listener(MatrixKeypadListener *listener);
 
@@ -37,6 +38,7 @@ class MatrixKeypad : public key_provider::KeyProvider, public Component {
   std::string keys_;
   int debounce_time_ = 0;
   bool has_diodes_{false};
+  bool has_pulldowns_{false};
   int pressed_key_ = -1;
 
   std::vector<MatrixKeypadListener *> listeners_{};

esphome/components/midea/climate.py

@@ -35,7 +35,7 @@ from esphome.components.climate import (
 )
 
 CODEOWNERS = ["@dudanov"]
-DEPENDENCIES = ["climate", "uart", "wifi"]
+DEPENDENCIES = ["climate", "uart"]
 AUTO_LOAD = ["sensor"]
 CONF_OUTDOOR_TEMPERATURE = "outdoor_temperature"
 CONF_POWER_USAGE = "power_usage"

esphome/components/mopeka_std_check/mopeka_std_check.cpp

@@ -71,7 +71,8 @@ bool MopekaStdCheck::parse_device(const esp32_ble_tracker::ESPBTDevice &device)
   const auto *mopeka_data = (const mopeka_std_package *) manu_data.data.data();
 
   const u_int8_t hardware_id = mopeka_data->data_1 & 0xCF;
-  if (static_cast<SensorType>(hardware_id) != STANDARD && static_cast<SensorType>(hardware_id) != XL) {
+  if (static_cast<SensorType>(hardware_id) != STANDARD && static_cast<SensorType>(hardware_id) != XL &&
+      static_cast<SensorType>(hardware_id) != ETRAILER) {
     ESP_LOGE(TAG, "[%s] Unsupported Sensor Type (0x%X)", device.address_str().c_str(), hardware_id);
     return false;
   }

esphome/components/mopeka_std_check/mopeka_std_check.h

@@ -14,6 +14,7 @@ namespace mopeka_std_check {
 enum SensorType {
   STANDARD = 0x02,
   XL = 0x03,
+  ETRAILER = 0x46,
 };
 
 // 4 values in one struct so it aligns to 8 byte. One `mopeka_std_values` is 40 bit long.

esphome/components/pulse_meter/pulse_meter_sensor.cpp

@@ -11,6 +11,9 @@ void PulseMeterSensor::setup() {
   this->pin_->setup();
   this->isr_pin_ = pin_->to_isr();
 
+  // Set the last processed edge to now for the first timeout
+  this->last_processed_edge_us_ = micros();
+
   if (this->filter_mode_ == FILTER_EDGE) {
     this->pin_->attach_interrupt(PulseMeterSensor::edge_intr, this, gpio::INTERRUPT_RISING_EDGE);
   } else if (this->filter_mode_ == FILTER_PULSE) {
@@ -38,12 +41,16 @@ void PulseMeterSensor::loop() {
     }
 
     // We need to detect at least two edges to have a valid pulse width
-    if (!this->initialized_) {
-      this->initialized_ = true;
-    } else {
-      uint32_t delta_us = this->get_->last_detected_edge_us_ - this->last_processed_edge_us_;
-      float pulse_width_us = delta_us / float(this->get_->count_);
-      this->publish_state((60.0f * 1000000.0f) / pulse_width_us);
+    switch (this->meter_state_) {
+      case MeterState::INITIAL:
+      case MeterState::TIMED_OUT: {
+        this->meter_state_ = MeterState::RUNNING;
+      } break;
+      case MeterState::RUNNING: {
+        uint32_t delta_us = this->get_->last_detected_edge_us_ - this->last_processed_edge_us_;
+        float pulse_width_us = delta_us / float(this->get_->count_);
+        this->publish_state((60.0f * 1000000.0f) / pulse_width_us);
+      } break;
     }
 
     this->last_processed_edge_us_ = this->get_->last_detected_edge_us_;
@@ -53,10 +60,18 @@ void PulseMeterSensor::loop() {
     const uint32_t now = micros();
     const uint32_t time_since_valid_edge_us = now - this->last_processed_edge_us_;
 
-    if (this->initialized_ && time_since_valid_edge_us > this->timeout_us_) {
-      ESP_LOGD(TAG, "No pulse detected for %us, assuming 0 pulses/min", time_since_valid_edge_us / 1000000);
-      this->initialized_ = false;
-      this->publish_state(0.0f);
+    switch (this->meter_state_) {
+        // Running and initial states can timeout
+      case MeterState::INITIAL:
+      case MeterState::RUNNING: {
+        if (time_since_valid_edge_us > this->timeout_us_) {
+          this->meter_state_ = MeterState::TIMED_OUT;
+          ESP_LOGD(TAG, "No pulse detected for %us, assuming 0 pulses/min", time_since_valid_edge_us / 1000000);
+          this->publish_state(0.0f);
+        }
+      } break;
+      default:
+        break;
     }
   }
 }

esphome/components/pulse_meter/pulse_meter_sensor.h

@@ -38,7 +38,8 @@ class PulseMeterSensor : public sensor::Sensor, public Component {
   InternalFilterMode filter_mode_{FILTER_EDGE};
 
   // Variables used in the loop
-  bool initialized_ = false;
+  enum class MeterState { INITIAL, RUNNING, TIMED_OUT };
+  MeterState meter_state_ = MeterState::INITIAL;
   uint32_t total_pulses_ = 0;
   uint32_t last_processed_edge_us_ = 0;
 

esphome/components/radon_eye_ble/radon_eye_listener.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "radon_eye_ble";
 
 bool RadonEyeListener::parse_device(const esp32_ble_tracker::ESPBTDevice &device) {
   if (not device.get_name().empty()) {
-    if (device.get_name().rfind("FR:R20:SN", 0) == 0) {
+    if (device.get_name().rfind("FR:R", 0) == 0) {
       // This is an RD200, I think
       ESP_LOGD(TAG, "Found Radon Eye RD200 device Name: %s (MAC: %s)", device.get_name().c_str(),
                device.address_str().c_str());

esphome/components/rp2040/__init__.py

@@ -152,6 +152,9 @@ CONFIG_SCHEMA = cv.All(
 async def to_code(config):
     cg.add(rp2040_ns.setup_preferences())
 
+    # Allow LDF to properly discover dependency including those in preprocessor
+    # conditionals
+    cg.add_platformio_option("lib_ldf_mode", "chain+")
     cg.add_platformio_option("board", config[CONF_BOARD])
     cg.add_build_flag("-DUSE_RP2040")
     cg.add_define("ESPHOME_BOARD", config[CONF_BOARD])

esphome/components/shelly_dimmer/light.py

@@ -57,6 +57,10 @@ KNOWN_FIRMWARE = {
         "https://github.com/jamesturton/shelly-dimmer-stm32/releases/download/v51.6/shelly-dimmer-stm32_v51.6.bin",
         "eda483e111c914723a33f5088f1397d5c0b19333db4a88dc965636b976c16c36",
     ),
+    "51.7": (
+        "https://github.com/jamesturton/shelly-dimmer-stm32/releases/download/v51.7/shelly-dimmer-stm32_v51.7.bin",
+        "7a20f1c967c469917368a79bc56498009045237080408cef7190743e08031889",
+    ),
 }
 
 

esphome/components/spi/spi.h

@@ -351,6 +351,7 @@ class SPIClient {
       : bit_order_(bit_order), mode_(mode), data_rate_(data_rate) {}
 
   virtual void spi_setup() {
+    esph_log_d("spi_device", "mode %u, data_rate %ukHz", (unsigned) this->mode_, (unsigned) (this->data_rate_ / 1000));
     this->delegate_ = this->parent_->register_device(this, this->mode_, this->bit_order_, this->data_rate_, this->cs_);
   }
 
@@ -398,10 +399,7 @@ class SPIDevice : public SPIClient {
 
   void set_data_rate(uint32_t data_rate) { this->data_rate_ = data_rate; }
 
-  void set_bit_order(SPIBitOrder order) {
-    this->bit_order_ = order;
-    esph_log_d("spi.h", "bit order set to %d", order);
-  }
+  void set_bit_order(SPIBitOrder order) { this->bit_order_ = order; }
 
   void set_mode(SPIMode mode) { this->mode_ = mode; }
 

esphome/components/spi/spi_arduino.cpp

@@ -15,6 +15,11 @@ class SPIDelegateHw : public SPIDelegate {
   void begin_transaction() override {
 #ifdef USE_RP2040
     SPISettings const settings(this->data_rate_, static_cast<BitOrder>(this->bit_order_), this->mode_);
+#elif defined(ESP8266)
+    // Arduino ESP8266 library has mangled values for SPI modes :-(
+    auto mode = (this->mode_ & 0x01) + ((this->mode_ & 0x02) << 3);
+    ESP_LOGV(TAG, "8266 mangled SPI mode 0x%X", mode);
+    SPISettings const settings(this->data_rate_, this->bit_order_, mode);
 #else
     SPISettings const settings(this->data_rate_, this->bit_order_, this->mode_);
 #endif

esphome/components/thermostat/thermostat_climate.cpp

@@ -986,6 +986,7 @@ void ThermostatClimate::change_preset_(climate::ClimatePreset preset) {
       // Fire any preset changed trigger if defined
       Trigger<> *trig = this->preset_change_trigger_;
       assert(trig != nullptr);
+      this->preset = preset;
       trig->trigger();
 
       this->refresh();
@@ -1010,6 +1011,7 @@ void ThermostatClimate::change_custom_preset_(const std::string &custom_preset)
       // Fire any preset changed trigger if defined
       Trigger<> *trig = this->preset_change_trigger_;
       assert(trig != nullptr);
+      this->custom_preset = custom_preset;
       trig->trigger();
 
       this->refresh();

esphome/components/waveshare_epaper/waveshare_epaper.cpp

@@ -1561,6 +1561,23 @@ void WaveshareEPaper7P5In::dump_config() {
   LOG_PIN("  Busy Pin: ", this->busy_pin_);
   LOG_UPDATE_INTERVAL(this);
 }
+bool WaveshareEPaper7P5InV2::wait_until_idle_() {
+  if (this->busy_pin_ == nullptr) {
+    return true;
+  }
+
+  const uint32_t start = millis();
+  while (this->busy_pin_->digital_read()) {
+    this->command(0x71);
+    if (millis() - start > this->idle_timeout_()) {
+      ESP_LOGE(TAG, "Timeout while displaying image!");
+      return false;
+    }
+    App.feed_wdt();
+    delay(10);
+  }
+  return true;
+}
 void WaveshareEPaper7P5InV2::initialize() {
   // COMMAND POWER SETTING
   this->command(0x01);
@@ -1568,10 +1585,21 @@ void WaveshareEPaper7P5InV2::initialize() {
   this->data(0x07);
   this->data(0x3f);
   this->data(0x3f);
-  this->command(0x04);
+
+  // We don't want the display to be powered at this point
 
   delay(100);  // NOLINT
   this->wait_until_idle_();
+
+  // COMMAND VCOM AND DATA INTERVAL SETTING
+  this->command(0x50);
+  this->data(0x10);
+  this->data(0x07);
+
+  // COMMAND TCON SETTING
+  this->command(0x60);
+  this->data(0x22);
+
   // COMMAND PANEL SETTING
   this->command(0x00);
   this->data(0x1F);
@@ -1582,19 +1610,30 @@ void WaveshareEPaper7P5InV2::initialize() {
   this->data(0x20);
   this->data(0x01);
   this->data(0xE0);
-  // COMMAND ...?
+
+  // COMMAND DUAL SPI MM_EN, DUSPI_EN
   this->command(0x15);
   this->data(0x00);
-  // COMMAND VCOM AND DATA INTERVAL SETTING
-  this->command(0x50);
-  this->data(0x10);
-  this->data(0x07);
-  // COMMAND TCON SETTING
-  this->command(0x60);
-  this->data(0x22);
+
+  // COMMAND POWER DRIVER HAT DOWN
+  // This command will turn off booster, controller, source driver, gate driver, VCOM, and
+  // temperature sensor, but register data will be kept until VDD turned OFF or Deep Sleep Mode.
+  // Source/Gate/Border/VCOM will be released to floating.
+  this->command(0x02);
 }
 void HOT WaveshareEPaper7P5InV2::display() {
   uint32_t buf_len = this->get_buffer_length_();
+
+  // COMMAND POWER ON
+  ESP_LOGI(TAG, "Power on the display and hat");
+
+  // This command will turn on booster, controller, regulators, and temperature sensor will be
+  // activated for one-time sensing before enabling booster. When all voltages are ready, the
+  // BUSY_N signal will return to high.
+  this->command(0x04);
+  delay(200);  // NOLINT
+  this->wait_until_idle_();
+
   // COMMAND DATA START TRANSMISSION NEW DATA
   this->command(0x13);
   delay(2);
@@ -1602,14 +1641,23 @@ void HOT WaveshareEPaper7P5InV2::display() {
     this->data(~(this->buffer_[i]));
   }
 
+  delay(100);  // NOLINT
+  this->wait_until_idle_();
+
   // COMMAND DISPLAY REFRESH
   this->command(0x12);
   delay(100);  // NOLINT
   this->wait_until_idle_();
+
+  ESP_LOGV(TAG, "Before command(0x02) (>> power off)");
+  this->command(0x02);
+  this->wait_until_idle_();
+  ESP_LOGV(TAG, "After command(0x02) (>> power off)");
 }
 
 int WaveshareEPaper7P5InV2::get_width_internal() { return 800; }
 int WaveshareEPaper7P5InV2::get_height_internal() { return 480; }
+uint32_t WaveshareEPaper7P5InV2::idle_timeout_() { return 10000; }
 void WaveshareEPaper7P5InV2::dump_config() {
   LOG_DISPLAY("", "Waveshare E-Paper", this);
   ESP_LOGCONFIG(TAG, "  Model: 7.5inV2rev2");

esphome/components/waveshare_epaper/waveshare_epaper.h

@@ -472,6 +472,8 @@ class WaveshareEPaper7P5InBC : public WaveshareEPaper {
 
 class WaveshareEPaper7P5InV2 : public WaveshareEPaper {
  public:
+  bool wait_until_idle_();
+
   void initialize() override;
 
   void display() override;
@@ -491,6 +493,8 @@ class WaveshareEPaper7P5InV2 : public WaveshareEPaper {
   int get_width_internal() override;
 
   int get_height_internal() override;
+
+  uint32_t idle_timeout_() override;
 };
 
 class WaveshareEPaper7P5InV2alt : public WaveshareEPaper7P5InV2 {

esphome/components/web_server/__init__.py

@@ -59,7 +59,7 @@ CONFIG_SCHEMA = cv.All(
         {
             cv.GenerateID(): cv.declare_id(WebServer),
             cv.Optional(CONF_PORT, default=80): cv.port,
-            cv.Optional(CONF_VERSION, default=2): cv.one_of(1, 2),
+            cv.Optional(CONF_VERSION, default=2): cv.one_of(1, 2, int=True),
             cv.Optional(CONF_CSS_URL): cv.string,
             cv.Optional(CONF_CSS_INCLUDE): cv.file_,
             cv.Optional(CONF_JS_URL): cv.string,

esphome/components/wifi/wifi_component_esp8266.cpp

@@ -98,6 +98,7 @@ bool WiFiComponent::wifi_apply_power_save_() {
       power_save = NONE_SLEEP_T;
       break;
   }
+  wifi_fpm_auto_sleep_set_in_null_mode(1);
   return wifi_set_sleep_type(power_save);
 }
 

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2023.9.0-dev"
+__version__ = "2023.9.0b3"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (

esphome/util.py

@@ -57,7 +57,7 @@ class SimpleRegistry(dict):
         return decorator
 
 
-def safe_print(message=""):
+def safe_print(message="", end="\n"):
     from esphome.core import CORE
 
     if CORE.dashboard:
@@ -67,20 +67,26 @@ def safe_print(message=""):
             pass
 
     try:
-        print(message)
+        print(message, end=end)
         return
     except UnicodeEncodeError:
         pass
 
     try:
-        print(message.encode("utf-8", "backslashreplace"))
+        print(message.encode("utf-8", "backslashreplace"), end=end)
     except UnicodeEncodeError:
         try:
-            print(message.encode("ascii", "backslashreplace"))
+            print(message.encode("ascii", "backslashreplace"), end=end)
         except UnicodeEncodeError:
             print("Cannot print line because of invalid locale!")
 
 
+def safe_input(prompt=""):
+    if prompt:
+        safe_print(prompt, end="")
+    return input()
+
+
 def shlex_quote(s):
     if not s:
         return "''"

esphome/wizard.py

@@ -11,7 +11,7 @@ from esphome.core import CORE
 from esphome.helpers import get_bool_env, write_file
 from esphome.log import Fore, color
 from esphome.storage_json import StorageJSON, ext_storage_path
-from esphome.util import safe_print
+from esphome.util import safe_input, safe_print
 
 CORE_BIG = r"""    _____ ____  _____  ______
    / ____/ __ \|  __ \|  ____|
@@ -252,7 +252,7 @@ def safe_print_step(step, big):
 def default_input(text, default):
     safe_print()
     safe_print(f"Press ENTER for default ({default})")
-    return input(text.format(default)) or default
+    return safe_input(text.format(default)) or default
 
 
 # From https://stackoverflow.com/a/518232/8924614
@@ -306,7 +306,7 @@ def wizard(path):
     )
     safe_print()
     sleep(1)
-    name = input(color(Fore.BOLD_WHITE, "(name): "))
+    name = safe_input(color(Fore.BOLD_WHITE, "(name): "))
 
     while True:
         try:
@@ -343,7 +343,9 @@ def wizard(path):
     while True:
         sleep(0.5)
         safe_print()
-        platform = input(color(Fore.BOLD_WHITE, f"({'/'.join(wizard_platforms)}): "))
+        platform = safe_input(
+            color(Fore.BOLD_WHITE, f"({'/'.join(wizard_platforms)}): ")
+        )
         try:
             platform = vol.All(vol.Upper, vol.Any(*wizard_platforms))(platform.upper())
             break
@@ -397,7 +399,7 @@ def wizard(path):
         boards.append(board_id)
 
     while True:
-        board = input(color(Fore.BOLD_WHITE, "(board): "))
+        board = safe_input(color(Fore.BOLD_WHITE, "(board): "))
         try:
             board = vol.All(vol.Lower, vol.Any(*boards))(board)
             break
@@ -423,7 +425,7 @@ def wizard(path):
     sleep(1.5)
     safe_print(f"For example \"{color(Fore.BOLD_WHITE, 'Abraham Linksys')}\".")
     while True:
-        ssid = input(color(Fore.BOLD_WHITE, "(ssid): "))
+        ssid = safe_input(color(Fore.BOLD_WHITE, "(ssid): "))
         try:
             ssid = cv.ssid(ssid)
             break
@@ -449,7 +451,7 @@ def wizard(path):
     safe_print()
     safe_print(f"For example \"{color(Fore.BOLD_WHITE, 'PASSWORD42')}\"")
     sleep(0.5)
-    psk = input(color(Fore.BOLD_WHITE, "(PSK): "))
+    psk = safe_input(color(Fore.BOLD_WHITE, "(PSK): "))
     safe_print(
         "Perfect! WiFi is now set up (you can create static IPs and so on later)."
     )
@@ -466,7 +468,7 @@ def wizard(path):
     safe_print()
     sleep(0.25)
     safe_print("Press ENTER for no password")
-    password = input(color(Fore.BOLD_WHITE, "(password): "))
+    password = safe_input(color(Fore.BOLD_WHITE, "(password): "))
 
     if not wizard_write(
         path=path,

requirements.txt

@@ -11,7 +11,7 @@ esptool==4.6.2
 click==8.1.7
 esphome-dashboard==20230904.0
 aioesphomeapi==15.0.0
-zeroconf==0.108.0
+zeroconf==0.112.0
 
 # esp-idf requires this, but doesn't bundle it by default
 # https://github.com/espressif/esp-idf/blob/220590d599e134d7a5e7f1e683cc4550349ffbf8/requirements.txt#L24

tests/test5.yaml

@@ -667,6 +667,7 @@ matrix_keypad:
     - pin: 17
     - pin: 16
   keys: "1234"
+  has_pulldowns: true
 
 key_collector:
   - id: reader

tests/unit_tests/test_wizard.py

@@ -319,7 +319,7 @@ def test_wizard_accepts_default_answers_esp8266(tmpdir, monkeypatch, wizard_answ
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -341,7 +341,7 @@ def test_wizard_accepts_default_answers_esp32(tmpdir, monkeypatch, wizard_answer
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -371,7 +371,7 @@ def test_wizard_offers_better_node_name(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -394,7 +394,7 @@ def test_wizard_requires_correct_platform(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -416,7 +416,7 @@ def test_wizard_requires_correct_board(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())
 
@@ -438,7 +438,7 @@ def test_wizard_requires_valid_ssid(tmpdir, monkeypatch, wizard_answers):
     config_file = tmpdir.join("test.yaml")
     input_mock = MagicMock(side_effect=wizard_answers)
     monkeypatch.setattr("builtins.input", input_mock)
-    monkeypatch.setattr(wz, "safe_print", lambda t=None: 0)
+    monkeypatch.setattr(wz, "safe_print", lambda t=None, end=None: 0)
     monkeypatch.setattr(wz, "sleep", lambda _: 0)
     monkeypatch.setattr(wz, "wizard_write", MagicMock())