[sdl] Allow the display to act as a KeyProvider

* retry scan

* setup pin and log retries

* fix retries

* remove retries

---------

Co-authored-by: Samuel Sieb <samuel@sieb.net>

.github/actions/build-image/action.yaml

@@ -46,7 +46,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@v6.0.1
+      uses: docker/build-push-action@v6.1.0
       with:
         context: .
         file: ./docker/Dockerfile
@@ -69,7 +69,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@v6.0.1
+      uses: docker/build-push-action@v6.1.0
       with:
         context: .
         file: ./docker/Dockerfile

.github/workflows/ci-api-proto.yml

@@ -21,7 +21,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:

.github/workflows/ci-docker.yml

@@ -40,7 +40,7 @@ jobs:
         arch: [amd64, armv7, aarch64]
         build_type: ["ha-addon", "docker", "lint"]
     steps:
-      - uses: actions/checkout@v4.1.6
+      - uses: actions/checkout@v4.1.7
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:

.github/workflows/ci.yml

@@ -34,7 +34,7 @@ jobs:
       cache-key: ${{ steps.cache-key.outputs.key }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Generate cache-key
         id: cache-key
         run: echo key="${{ hashFiles('requirements.txt', 'requirements_optional.txt', 'requirements_test.txt') }}" >> $GITHUB_OUTPUT
@@ -66,7 +66,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -87,7 +87,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -108,7 +108,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -129,7 +129,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -150,7 +150,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -199,7 +199,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -229,7 +229,7 @@ jobs:
       - common
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -254,7 +254,7 @@ jobs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Find all YAML test files
         id: set-matrix
         run: echo "matrix=$(ls tests/test*.yaml | jq -R -s -c 'split("\n")[:-1]')" >> $GITHUB_OUTPUT
@@ -271,7 +271,7 @@ jobs:
         file: ${{ fromJson(needs.compile-tests-list.outputs.matrix) }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -303,7 +303,7 @@ jobs:
         file: ${{ fromJson(needs.compile-tests-list.outputs.matrix) }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -358,7 +358,7 @@ jobs:
 
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -387,6 +387,13 @@ jobs:
           echo "::add-matcher::.github/workflows/matchers/gcc.json"
           echo "::add-matcher::.github/workflows/matchers/clang-tidy.json"
 
+      - name: Run 'pio run --list-targets -e esp32-idf-tidy'
+        if: matrix.name == 'Run script/clang-tidy for ESP32 IDF'
+        run: |
+          . venv/bin/activate
+          mkdir -p .temp
+          pio run --list-targets -e esp32-idf-tidy
+
       - name: Run clang-tidy
         run: |
           . venv/bin/activate
@@ -410,7 +417,7 @@ jobs:
       count: ${{ steps.list-components.outputs.count }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
         with:
           # Fetch enough history so `git merge-base refs/remotes/origin/dev HEAD` works.
           fetch-depth: 500
@@ -458,7 +465,7 @@ jobs:
         run: sudo apt-get install libsodium-dev libsdl2-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:
@@ -484,7 +491,7 @@ jobs:
       matrix: ${{ steps.split.outputs.components }}
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Split components into 20 groups
         id: split
         run: |
@@ -512,7 +519,7 @@ jobs:
         run: sudo apt-get install libsodium-dev libsdl2-dev
 
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Restore Python
         uses: ./.github/actions/restore-python
         with:

.github/workflows/release.yml

@@ -19,7 +19,7 @@ jobs:
       tag: ${{ steps.tag.outputs.tag }}
       branch_build: ${{ steps.tag.outputs.branch_build }}
     steps:
-      - uses: actions/checkout@v4.1.6
+      - uses: actions/checkout@v4.1.7
       - name: Get tag
         id: tag
         # yamllint disable rule:line-length
@@ -51,7 +51,7 @@ jobs:
       contents: read
       id-token: write
     steps:
-      - uses: actions/checkout@v4.1.6
+      - uses: actions/checkout@v4.1.7
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:
@@ -83,7 +83,7 @@ jobs:
           - linux/arm/v7
           - linux/arm64
     steps:
-      - uses: actions/checkout@v4.1.6
+      - uses: actions/checkout@v4.1.7
       - name: Set up Python
         uses: actions/setup-python@v5.1.0
         with:
@@ -174,7 +174,7 @@ jobs:
           - ghcr
           - dockerhub
     steps:
-      - uses: actions/checkout@v4.1.6
+      - uses: actions/checkout@v4.1.7
 
       - name: Download digests
         uses: actions/download-artifact@v4.1.7

.github/workflows/sync-device-classes.yml

@@ -13,10 +13,10 @@ jobs:
     if: github.repository == 'esphome/esphome'
     steps:
       - name: Checkout
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
 
       - name: Checkout Home Assistant
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
         with:
           repository: home-assistant/core
           path: lib/home-assistant
@@ -36,7 +36,7 @@ jobs:
           python ./script/sync-device_class.py
 
       - name: Commit changes
-        uses: peter-evans/create-pull-request@v6.0.5
+        uses: peter-evans/create-pull-request@v6.1.0
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>

.github/workflows/yaml-lint.yml

@@ -18,7 +18,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out code from GitHub
-        uses: actions/checkout@v4.1.6
+        uses: actions/checkout@v4.1.7
       - name: Run yamllint
         uses: frenck/action-yamllint@v1.5.0
         with:

esphome/codegen.py

@@ -60,7 +60,6 @@ from esphome.cpp_types import (  # noqa
     std_ns,
     std_shared_ptr,
     std_string,
-    std_string_ref,
     std_vector,
     uint8,
     uint16,

esphome/components/cover/cover.h

@@ -129,13 +129,13 @@ class Cover : public EntityBase, public EntityBase_DeviceClass {
    *
    * This is a legacy method and may be removed later, please use `.make_call()` instead.
    */
-  ESPDEPRECATED("open() is deprecated, use make_call().set_command_open() instead.", "2021.9")
+  ESPDEPRECATED("open() is deprecated, use make_call().set_command_open().perform() instead.", "2021.9")
   void open();
   /** Close the cover.
    *
    * This is a legacy method and may be removed later, please use `.make_call()` instead.
    */
-  ESPDEPRECATED("close() is deprecated, use make_call().set_command_close() instead.", "2021.9")
+  ESPDEPRECATED("close() is deprecated, use make_call().set_command_close().perform() instead.", "2021.9")
   void close();
   /** Stop the cover.
    *

esphome/components/dallas_temp/dallas_temp.cpp

@@ -145,21 +145,24 @@ bool DallasTemperatureSensor::check_scratch_pad_() {
 float DallasTemperatureSensor::get_temp_c_() {
   int16_t temp = (this->scratch_pad_[1] << 8) | this->scratch_pad_[0];
   if ((this->address_ & 0xff) == DALLAS_MODEL_DS18S20) {
-    return (temp >> 1) + (this->scratch_pad_[7] - this->scratch_pad_[6]) / float(this->scratch_pad_[7]) - 0.25;
+    if (this->scratch_pad_[7] != 0x10)
-  }
+      ESP_LOGE(TAG, "unexpected COUNT_PER_C value: %u", this->scratch_pad_[7]);
-  switch (this->resolution_) {
+    temp = ((temp & 0xfff7) << 3) + (0x10 - this->scratch_pad_[6]) - 4;
-    case 9:
+  } else {
-      temp &= 0xfff8;
+    switch (this->resolution_) {
-      break;
+      case 9:
-    case 10:
+        temp &= 0xfff8;
-      temp &= 0xfffc;
+        break;
-      break;
+      case 10:
-    case 11:
+        temp &= 0xfffc;
-      temp &= 0xfffe;
+        break;
-      break;
+      case 11:
-    case 12:
+        temp &= 0xfffe;
-    default:
+        break;
-      break;
+      case 12:
+      default:
+        break;
+    }
   }
 
   return temp / 16.0f;

esphome/components/ds1307/ds1307.cpp

@@ -37,18 +37,14 @@ void DS1307Component::read_time() {
     ESP_LOGW(TAG, "RTC halted, not syncing to system clock.");
     return;
   }
-  ESPTime rtc_time{
+  ESPTime rtc_time{.second = uint8_t(ds1307_.reg.second + 10 * ds1307_.reg.second_10),
-      .second = uint8_t(ds1307_.reg.second + 10 * ds1307_.reg.second_10),
+                   .minute = uint8_t(ds1307_.reg.minute + 10u * ds1307_.reg.minute_10),
-      .minute = uint8_t(ds1307_.reg.minute + 10u * ds1307_.reg.minute_10),
+                   .hour = uint8_t(ds1307_.reg.hour + 10u * ds1307_.reg.hour_10),
-      .hour = uint8_t(ds1307_.reg.hour + 10u * ds1307_.reg.hour_10),
+                   .day_of_week = uint8_t(ds1307_.reg.weekday),
-      .day_of_week = uint8_t(ds1307_.reg.weekday),
+                   .day_of_month = uint8_t(ds1307_.reg.day + 10u * ds1307_.reg.day_10),
-      .day_of_month = uint8_t(ds1307_.reg.day + 10u * ds1307_.reg.day_10),
+                   .day_of_year = 1,  // ignored by recalc_timestamp_utc(false)
-      .day_of_year = 1,  // ignored by recalc_timestamp_utc(false)
+                   .month = uint8_t(ds1307_.reg.month + 10u * ds1307_.reg.month_10),
-      .month = uint8_t(ds1307_.reg.month + 10u * ds1307_.reg.month_10),
+                   .year = uint16_t(ds1307_.reg.year + 10u * ds1307_.reg.year_10 + 2000)};
-      .year = uint16_t(ds1307_.reg.year + 10u * ds1307_.reg.year_10 + 2000),
-      .is_dst = false,  // not used
-      .timestamp = 0    // overwritten by recalc_timestamp_utc(false)
-  };
   rtc_time.recalc_timestamp_utc(false);
   if (!rtc_time.is_valid()) {
     ESP_LOGE(TAG, "Invalid RTC time, not syncing to system clock.");

esphome/components/esp32_camera/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     CONF_VSYNC_PIN,
 )
 from esphome.core import CORE
-from esphome.components.esp32 import add_idf_sdkconfig_option
+from esphome.components.esp32 import add_idf_component
 from esphome.cpp_helpers import setup_entity
 
 DEPENDENCIES = ["esp32"]
@@ -290,8 +290,11 @@ async def to_code(config):
     cg.add_define("USE_ESP32_CAMERA")
 
     if CORE.using_esp_idf:
-        cg.add_library("espressif/esp32-camera", "1.0.0")
+        add_idf_component(
-        add_idf_sdkconfig_option("CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC", True)
+            name="esp32-camera",
+            repo="https://github.com/espressif/esp32-camera.git",
+            ref="v2.0.9",
+        )
 
     for conf in config.get(CONF_ON_STREAM_START, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)

esphome/components/esphome/ota/__init__.py

@@ -1,17 +1,10 @@
-import logging
-
 import esphome.codegen as cg
 import esphome.config_validation as cv
-import esphome.final_validate as fv
 from esphome.components.ota import BASE_OTA_SCHEMA, ota_to_code, OTAComponent
-from esphome.config_helpers import merge_config
 from esphome.const import (
-    CONF_ESPHOME,
     CONF_ID,
     CONF_NUM_ATTEMPTS,
-    CONF_OTA,
     CONF_PASSWORD,
-    CONF_PLATFORM,
     CONF_PORT,
     CONF_REBOOT_TIMEOUT,
     CONF_SAFE_MODE,
@@ -19,8 +12,6 @@ from esphome.const import (
 )
 from esphome.core import coroutine_with_priority
 
-_LOGGER = logging.getLogger(__name__)
-
 
 CODEOWNERS = ["@esphome/core"]
 AUTO_LOAD = ["md5", "socket"]
@@ -30,65 +21,6 @@ esphome = cg.esphome_ns.namespace("esphome")
 ESPHomeOTAComponent = esphome.class_("ESPHomeOTAComponent", OTAComponent)
 
 
-def ota_esphome_final_validate(config):
-    full_conf = fv.full_config.get()
-    full_ota_conf = full_conf[CONF_OTA]
-    new_ota_conf = []
-    merged_ota_esphome_configs_by_port = {}
-    ports_with_merged_configs = []
-    for ota_conf in full_ota_conf:
-        if ota_conf.get(CONF_PLATFORM) == CONF_ESPHOME:
-            if (
-                conf_port := ota_conf.get(CONF_PORT)
-            ) not in merged_ota_esphome_configs_by_port:
-                merged_ota_esphome_configs_by_port[conf_port] = ota_conf
-            else:
-                if merged_ota_esphome_configs_by_port[conf_port][
-                    CONF_VERSION
-                ] != ota_conf.get(CONF_VERSION):
-                    raise cv.Invalid(
-                        f"Found multiple configurations but {CONF_VERSION} is inconsistent"
-                    )
-                if (
-                    merged_ota_esphome_configs_by_port[conf_port][CONF_ID].is_manual
-                    and ota_conf.get(CONF_ID).is_manual
-                ):
-                    raise cv.Invalid(
-                        f"Found multiple configurations but {CONF_ID} is inconsistent"
-                    )
-                if (
-                    CONF_PASSWORD in merged_ota_esphome_configs_by_port[conf_port]
-                    and CONF_PASSWORD in ota_conf
-                    and merged_ota_esphome_configs_by_port[conf_port][CONF_PASSWORD]
-                    != ota_conf.get(CONF_PASSWORD)
-                ):
-                    raise cv.Invalid(
-                        f"Found multiple configurations but {CONF_PASSWORD} is inconsistent"
-                    )
-
-                ports_with_merged_configs.append(conf_port)
-                merged_ota_esphome_configs_by_port[conf_port] = merge_config(
-                    merged_ota_esphome_configs_by_port[conf_port], ota_conf
-                )
-        else:
-            new_ota_conf.append(ota_conf)
-
-    for port_conf in merged_ota_esphome_configs_by_port.values():
-        new_ota_conf.append(port_conf)
-
-    full_conf[CONF_OTA] = new_ota_conf
-    fv.full_config.set(full_conf)
-
-    if len(ports_with_merged_configs) > 0:
-        _LOGGER.warning(
-            "Found and merged multiple configurations for %s %s %s port(s) %s",
-            CONF_OTA,
-            CONF_PLATFORM,
-            CONF_ESPHOME,
-            ports_with_merged_configs,
-        )
-
-
 CONFIG_SCHEMA = (
     cv.Schema(
         {
@@ -118,8 +50,6 @@ CONFIG_SCHEMA = (
     .extend(cv.COMPONENT_SCHEMA)
 )
 
-FINAL_VALIDATE_SCHEMA = ota_esphome_final_validate
-
 
 @coroutine_with_priority(52.0)
 async def to_code(config):

esphome/components/ethernet/ethernet_component.cpp

@@ -631,7 +631,7 @@ void EthernetComponent::write_phy_register_(esp_eth_mac_t *mac, PHYRegister regi
   ESPHL_ERROR_CHECK(err, "Writing PHY Register failed");
 
   if (this->type_ == ETHERNET_TYPE_RTL8201 && register_data.page) {
-    ESP_LOGD(TAG, "Select PHY Register Page 0x%02" PRIX32, 0x0);
+    ESP_LOGD(TAG, "Select PHY Register Page 0x00");
     err = mac->write_phy_reg(mac, this->phy_addr_, eth_phy_psr_reg_addr, 0x0);
     ESPHL_ERROR_CHECK(err, "Select PHY Register Page 0 failed");
   }

esphome/components/gpio/one_wire/gpio_one_wire.cpp

@@ -94,15 +94,13 @@ bool HOT IRAM_ATTR GPIOOneWireBus::read_bit_() {
 
   // measure from start value directly, to get best accurate timing no matter
   // how long pin_mode/delayMicroseconds took
-  uint32_t now = micros();
+  delayMicroseconds(12 - (micros() - start));
-  if (now - start < 12)
-    delayMicroseconds(12 - (now - start));
 
   // sample bus to read bit from peer
   bool r = pin_.digital_read();
 
   // read slot is at least 60µs; get as close to 60µs to spend less time with interrupts locked
-  now = micros();
+  uint32_t now = micros();
   if (now - start < 60)
     delayMicroseconds(60 - (now - start));
 

esphome/components/http_request/__init__.py

@@ -257,7 +257,7 @@ async def http_request_action_to_code(config, action_id, template_arg, args):
             trigger,
             [
                 (cg.std_shared_ptr.template(HttpContainer), "response"),
-                (cg.std_string_ref, "body"),
+                (cg.std_string, "body"),
             ],
             conf,
         )

esphome/components/http_request/http_request.h

@@ -43,10 +43,10 @@ class HttpContainer : public Parented<HttpRequestComponent> {
   bool secure_{false};
 };
 
-class HttpRequestResponseTrigger : public Trigger<std::shared_ptr<HttpContainer>, std::string &> {
+class HttpRequestResponseTrigger : public Trigger<std::shared_ptr<HttpContainer>, std::string> {
  public:
-  void process(std::shared_ptr<HttpContainer> container, std::string &response_body) {
+  void process(std::shared_ptr<HttpContainer> container, std::string response_body) {
-    this->trigger(std::move(container), response_body);
+    this->trigger(std::move(container), std::move(response_body));
   }
 };
 
@@ -149,21 +149,11 @@ template<typename... Ts> class HttpRequestSendAction : public Action<Ts...> {
         }
         response_body.reserve(read_index);
         response_body.assign((char *) buf, read_index);
-        allocator.deallocate(buf, max_length);
       }
     }
 
-    if (this->response_triggers_.size() == 1) {
+    for (auto *trigger : this->response_triggers_) {
-      // if there is only one trigger, no need to copy the response body
+      trigger->process(container, response_body);
-      this->response_triggers_[0]->process(container, response_body);
-    } else {
-      for (auto *trigger : this->response_triggers_) {
-        // with multiple triggers, pass a copy of the response body to each
-        // one so that modifications made in one trigger are not visible to
-        // the others
-        auto response_body_copy = std::string(response_body);
-        trigger->process(container, response_body_copy);
-      }
     }
     container->end();
   }

esphome/components/ledc/ledc_output.cpp

@@ -115,15 +115,12 @@ void LEDCOutput::write_state(float state) {
   const uint32_t max_duty = (uint32_t(1) << this->bit_depth_) - 1;
   const float duty_rounded = roundf(state * max_duty);
   auto duty = static_cast<uint32_t>(duty_rounded);
+
 #ifdef USE_ARDUINO
   ESP_LOGV(TAG, "Setting duty: %u on channel %u", duty, this->channel_);
   ledcWrite(this->channel_, duty);
 #endif
 #ifdef USE_ESP_IDF
-  // ensure that 100% on is not 99.975% on
-  if ((duty == max_duty) && (max_duty != 1)) {
-    duty = max_duty + 1;
-  }
   auto speed_mode = get_speed_mode(channel_);
   auto chan_num = static_cast<ledc_channel_t>(channel_ % 8);
   int hpoint = ledc_angle_to_htop(this->phase_angle_, this->bit_depth_);

esphome/components/micro_wake_word/__init__.py

@@ -312,6 +312,7 @@ async def to_code(config):
     esp32.add_idf_component(
         name="esp-tflite-micro",
         repo="https://github.com/espressif/esp-tflite-micro",
+        ref="v1.3.1",
     )
 
     cg.add_build_flag("-DTF_LITE_STATIC_MEMORY")

esphome/components/midea/climate.py

@@ -293,4 +293,4 @@ async def to_code(config):
     if CONF_HUMIDITY_SETPOINT in config:
         sens = await sensor.new_sensor(config[CONF_HUMIDITY_SETPOINT])
         cg.add(var.set_humidity_setpoint_sensor(sens))
-    cg.add_library("dudanov/MideaUART", "1.1.9")
+    cg.add_library("dudanov/MideaUART", "1.1.8")

esphome/components/modbus_controller/modbus_controller.cpp

@@ -116,8 +116,7 @@ void ModbusController::on_modbus_read_registers(uint8_t function_code, uint16_t
         ESP_LOGD(TAG, "Matched register. Address: 0x%02X. Value type: %zu. Register count: %u. Value: %0.1f.",
                  server_register->address, static_cast<uint8_t>(server_register->value_type),
                  server_register->register_count, value);
-        std::vector<uint16_t> payload = float_to_payload(value, server_register->value_type);
+        number_to_payload(sixteen_bit_response, value, server_register->value_type);
-        sixteen_bit_response.insert(sixteen_bit_response.end(), payload.cbegin(), payload.cend());
         current_address += server_register->register_count;
         found = true;
         break;

esphome/components/modbus_controller/text_sensor/modbus_textsensor.cpp

@@ -15,7 +15,7 @@ void ModbusTextSensor::parse_and_publish(const std::vector<uint8_t> &data) {
   std::ostringstream output;
   uint8_t items_left = this->response_bytes;
   uint8_t index = this->offset;
-  char buffer[5];
+  char buffer[4];
   while ((items_left > 0) && index < data.size()) {
     uint8_t b = data[index];
     switch (this->encode_) {

esphome/components/number/__init__.py

@@ -26,6 +26,7 @@ from esphome.const import (
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_CARBON_MONOXIDE,
+    DEVICE_CLASS_CONDUCTIVITY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_DATA_RATE,
     DEVICE_CLASS_DATA_SIZE,
@@ -82,6 +83,7 @@ DEVICE_CLASSES = [
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_CARBON_MONOXIDE,
+    DEVICE_CLASS_CONDUCTIVITY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_DATA_RATE,
     DEVICE_CLASS_DATA_SIZE,

esphome/components/qspi_amoled/display.py

@@ -42,6 +42,14 @@ COLOR_ORDERS = {
 }
 DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema
 
+
+def validate_dimension(value):
+    value = cv.positive_int(value)
+    if value % 2 != 0:
+        raise cv.Invalid("Width/height/offset must be divisible by 2")
+    return value
+
+
 CONFIG_SCHEMA = cv.All(
     display.FULL_DISPLAY_SCHEMA.extend(
         cv.Schema(
@@ -52,10 +60,14 @@ CONFIG_SCHEMA = cv.All(
                     cv.dimensions,
                     cv.Schema(
                         {
-                            cv.Required(CONF_WIDTH): cv.int_,
+                            cv.Required(CONF_WIDTH): validate_dimension,
-                            cv.Required(CONF_HEIGHT): cv.int_,
+                            cv.Required(CONF_HEIGHT): validate_dimension,
-                            cv.Optional(CONF_OFFSET_HEIGHT, default=0): cv.int_,
+                            cv.Optional(
-                            cv.Optional(CONF_OFFSET_WIDTH, default=0): cv.int_,
+                                CONF_OFFSET_HEIGHT, default=0
+                            ): validate_dimension,
+                            cv.Optional(
+                                CONF_OFFSET_WIDTH, default=0
+                            ): validate_dimension,
                         }
                     ),
                 ),

esphome/components/qspi_amoled/qspi_amoled.cpp

@@ -25,7 +25,23 @@ void QspiAmoLed::setup() {
 }
 
 void QspiAmoLed::update() {
+  if (!this->setup_complete_) {
+    return;
+  }
   this->do_update_();
+  // Start addresses and widths/heights must be divisible by 2 (CASET/RASET restriction in datasheet)
+  if (this->x_low_ % 2 == 1) {
+    this->x_low_--;
+  }
+  if (this->x_high_ % 2 == 0) {
+    this->x_high_++;
+  }
+  if (this->y_low_ % 2 == 1) {
+    this->y_low_--;
+  }
+  if (this->y_high_ % 2 == 0) {
+    this->y_high_++;
+  }
   int w = this->x_high_ - this->x_low_ + 1;
   int h = this->y_high_ - this->y_low_ + 1;
   this->draw_pixels_at(this->x_low_, this->y_low_, w, h, this->buffer_, this->color_mode_, display::COLOR_BITNESS_565,

esphome/components/qspi_amoled/qspi_amoled.h

@@ -65,13 +65,10 @@ class QspiAmoLed : public display::DisplayBuffer,
 
   void set_reset_pin(GPIOPin *reset_pin) { this->reset_pin_ = reset_pin; }
   void set_enable_pin(GPIOPin *enable_pin) { this->enable_pin_ = enable_pin; }
-  void set_width(uint16_t width) { this->width_ = width; }
   void set_dimensions(uint16_t width, uint16_t height) {
     this->width_ = width;
     this->height_ = height;
   }
-  int get_width() override { return this->width_; }
-  int get_height() override { return this->height_; }
   void set_invert_colors(bool invert_colors) {
     this->invert_colors_ = invert_colors;
     this->reset_params_();

esphome/components/remote_base/dooya_protocol.cpp

@@ -8,10 +8,10 @@ static const char *const TAG = "remote.dooya";
 
 static const uint32_t HEADER_HIGH_US = 5000;
 static const uint32_t HEADER_LOW_US = 1500;
-static const uint32_t BIT_ZERO_HIGH_US = 750;
+static const uint32_t BIT_ZERO_HIGH_US = 350;
-static const uint32_t BIT_ZERO_LOW_US = 350;
+static const uint32_t BIT_ZERO_LOW_US = 750;
-static const uint32_t BIT_ONE_HIGH_US = 350;
+static const uint32_t BIT_ONE_HIGH_US = 750;
-static const uint32_t BIT_ONE_LOW_US = 750;
+static const uint32_t BIT_ONE_LOW_US = 350;
 
 void DooyaProtocol::encode(RemoteTransmitData *dst, const DooyaData &data) {
   dst->set_carrier_frequency(0);

esphome/components/safe_mode/__init__.py

@@ -56,20 +56,21 @@ CONFIG_SCHEMA = cv.All(
 
 @coroutine_with_priority(50.0)
 async def to_code(config):
-    if not config[CONF_DISABLED]:
+    if config[CONF_DISABLED]:
-        var = cg.new_Pvariable(config[CONF_ID])
+        return
-        await cg.register_component(var, config)
 
-        for conf in config.get(CONF_ON_SAFE_MODE, []):
+    var = cg.new_Pvariable(config[CONF_ID])
-            trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
+    await cg.register_component(var, config)
-            await automation.build_automation(trigger, [], conf)
 
-        condition = var.should_enter_safe_mode(
+    for conf in config.get(CONF_ON_SAFE_MODE, []):
-            config[CONF_NUM_ATTEMPTS],
+        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-            config[CONF_REBOOT_TIMEOUT],
+        await automation.build_automation(trigger, [], conf)
-            config[CONF_BOOT_IS_GOOD_AFTER],
-        )
-        cg.add(RawExpression(f"if ({condition}) return"))
 
+    condition = var.should_enter_safe_mode(
+        config[CONF_NUM_ATTEMPTS],
+        config[CONF_REBOOT_TIMEOUT],
+        config[CONF_BOOT_IS_GOOD_AFTER],
+    )
+    cg.add(RawExpression(f"if ({condition}) return"))
     CORE.data[CONF_SAFE_MODE] = {}
     CORE.data[CONF_SAFE_MODE][KEY_PAST_SAFE_MODE] = True

esphome/components/script/__init__.py

@@ -88,7 +88,7 @@ def validate_parameter_name(value):
     raise cv.Invalid(f"Script's parameter name cannot be {CONF_ID}")
 
 
-ALLOWED_PARAM_TYPE_CHARSET = set("abcdefghijklmnopqrstuvwxyz0123456789_:*&[]")
+ALLOWED_PARAM_TYPE_CHARSET = set("abcdefghijklmnopqrstuvwxyz0123456789_:*&[]<>")
 
 
 def validate_parameter_type(value):

esphome/components/sdl/display.py

@@ -2,7 +2,7 @@ import subprocess
 
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome.components import display
+from esphome.components import display, key_provider
 from esphome.const import (
     CONF_ID,
     CONF_DIMENSIONS,
@@ -12,8 +12,10 @@ from esphome.const import (
     PLATFORM_HOST,
 )
 
+AUTO_LOAD = ["key_provider"]
+
 sdl_ns = cg.esphome_ns.namespace("sdl")
-Sdl = sdl_ns.class_("Sdl", display.Display, cg.Component)
+Sdl = sdl_ns.class_("Sdl", display.Display, key_provider.KeyProvider)
 
 
 CONF_SDL_OPTIONS = "sdl_options"

esphome/components/sdl/sdl_esphome.cpp

@@ -84,6 +84,10 @@ void Sdl::loop() {
         }
         break;
 
+      case SDL_KEYUP:
+        this->send_key_(e.key.keysym.sym);
+        break;
+
       default:
         ESP_LOGV(TAG, "Event %d", e.type);
         break;

esphome/components/sdl/sdl_esphome.h

@@ -1,10 +1,11 @@
 #pragma once
 
 #ifdef USE_HOST
+#include "esphome/components/display/display.h"
+#include "esphome/components/key_provider/key_provider.h"
+#include "esphome/core/application.h"
 #include "esphome/core/component.h"
 #include "esphome/core/log.h"
-#include "esphome/core/application.h"
-#include "esphome/components/display/display.h"
 #define SDL_MAIN_HANDLED
 #include "SDL.h"
 
@@ -13,7 +14,7 @@ namespace sdl {
 
 constexpr static const char *const TAG = "sdl";
 
-class Sdl : public display::Display {
+class Sdl : public display::Display, public key_provider::KeyProvider {
  public:
   display::DisplayType get_display_type() override { return display::DISPLAY_TYPE_COLOR; }
   void update() override;

esphome/components/sensor/__init__.py

@@ -43,6 +43,7 @@ from esphome.const import (
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_CARBON_MONOXIDE,
+    DEVICE_CLASS_CONDUCTIVITY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_DATA_RATE,
     DEVICE_CLASS_DATA_SIZE,
@@ -103,6 +104,7 @@ DEVICE_CLASSES = [
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_CARBON_MONOXIDE,
+    DEVICE_CLASS_CONDUCTIVITY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_DATA_RATE,
     DEVICE_CLASS_DATA_SIZE,

esphome/components/uart/__init__.py

@@ -258,6 +258,7 @@ KEY_UART_DEVICES = "uart_devices"
 def final_validate_device_schema(
     name: str,
     *,
+    uart_bus: str = CONF_UART_ID,
     baud_rate: Optional[int] = None,
     require_tx: bool = False,
     require_rx: bool = False,
@@ -268,7 +269,7 @@ def final_validate_device_schema(
     def validate_baud_rate(value):
         if value != baud_rate:
             raise cv.Invalid(
-                f"Component {name} requires baud rate {baud_rate} for the uart bus"
+                f"Component {name} requires baud rate {baud_rate} for the uart referenced by {uart_bus}"
             )
         return value
 
@@ -287,21 +288,21 @@ def final_validate_device_schema(
     def validate_data_bits(value):
         if value != data_bits:
             raise cv.Invalid(
-                f"Component {name} requires {data_bits} data bits for the uart bus"
+                f"Component {name} requires {data_bits} data bits for the uart referenced by {uart_bus}"
             )
         return value
 
     def validate_parity(value):
         if value != parity:
             raise cv.Invalid(
-                f"Component {name} requires parity {parity} for the uart bus"
+                f"Component {name} requires parity {parity} for the uart referenced by {uart_bus}"
             )
         return value
 
     def validate_stop_bits(value):
         if value != stop_bits:
             raise cv.Invalid(
-                f"Component {name} requires {stop_bits} stop bits for the uart bus"
+                f"Component {name} requires {stop_bits} stop bits for the uart referenced by {uart_bus}"
             )
         return value
 
@@ -316,14 +317,14 @@ def final_validate_device_schema(
             hub_schema[
                 cv.Required(
                     CONF_TX_PIN,
-                    msg=f"Component {name} requires this uart bus to declare a tx_pin",
+                    msg=f"Component {name} requires uart referenced by {uart_bus} to declare a tx_pin",
                 )
             ] = validate_pin(CONF_TX_PIN, device)
         if require_rx and uart_id_type_str in NATIVE_UART_CLASSES:
             hub_schema[
                 cv.Required(
                     CONF_RX_PIN,
-                    msg=f"Component {name} requires this uart bus to declare a rx_pin",
+                    msg=f"Component {name} requires uart referenced by {uart_bus} to declare a rx_pin",
                 )
             ] = validate_pin(CONF_RX_PIN, device)
         if baud_rate is not None:
@@ -337,7 +338,7 @@ def final_validate_device_schema(
         return cv.Schema(hub_schema, extra=cv.ALLOW_EXTRA)(hub_config)
 
     return cv.Schema(
-        {cv.Required(CONF_UART_ID): fv.id_declaration_match_schema(validate_hub)},
+        {cv.Required(uart_bus): fv.id_declaration_match_schema(validate_hub)},
         extra=cv.ALLOW_EXTRA,
     )
 

esphome/components/update/__init__.py

@@ -69,7 +69,7 @@ async def setup_update_core_(var, config):
         await mqtt.register_mqtt_component(mqtt_, config)
 
     if web_server_id_config := config.get(CONF_WEB_SERVER_ID):
-        web_server_ = await cg.get_variable(web_server_id_config)
+        web_server_ = cg.get_variable(web_server_id_config)
         web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 

esphome/components/veml7700/veml7700.cpp

@@ -243,7 +243,7 @@ ErrorCode VEML7700Component::configure_() {
   }
 
   PSMRegister psm{0};
-  psm.PSM = PSM::PSM_MODE_1;
+  psm.PSM = PSMMode::PSM_MODE_1;
   psm.PSM_EN = false;
   ESP_LOGV(TAG, "Setting PSM to 0x%04X", psm.raw);
   err = this->write_register((uint8_t) CommandRegisters::PWR_SAVING, psm.raw_bytes, VEML_REG_SIZE);

esphome/components/veml7700/veml7700.h

@@ -24,7 +24,7 @@ enum class CommandRegisters : uint8_t {
   ALS_INT = 0x06      // R: ALS INT trigger event
 };
 
-enum Gain : uint8_t {
+enum Gain : uint16_t {
   X_1 = 0,
   X_2 = 1,
   X_1_8 = 2,
@@ -32,7 +32,7 @@ enum Gain : uint8_t {
 };
 const uint8_t GAINS_COUNT = 4;
 
-enum IntegrationTime : uint8_t {
+enum IntegrationTime : uint16_t {
   INTEGRATION_TIME_25MS = 0b1100,
   INTEGRATION_TIME_50MS = 0b1000,
   INTEGRATION_TIME_100MS = 0b0000,
@@ -42,14 +42,14 @@ enum IntegrationTime : uint8_t {
 };
 const uint8_t INTEGRATION_TIMES_COUNT = 6;
 
-enum Persistence : uint8_t {
+enum Persistence : uint16_t {
   PERSISTENCE_1 = 0,
   PERSISTENCE_2 = 1,
   PERSISTENCE_4 = 2,
   PERSISTENCE_8 = 3,
 };
 
-enum PSM : uint8_t {
+enum PSMMode : uint16_t {
   PSM_MODE_1 = 0,
   PSM_MODE_2 = 1,
   PSM_MODE_3 = 2,
@@ -92,7 +92,7 @@ union PSMRegister {
   uint8_t raw_bytes[2];
   struct {
     bool PSM_EN : 1;
-    uint8_t PSM : 2;
+    PSMMode PSM : 2;
     uint16_t reserved : 13;
   } __attribute__((packed));
 };

esphome/components/voice_assistant/voice_assistant.cpp

@@ -799,7 +799,7 @@ void VoiceAssistant::on_audio(const api::VoiceAssistantAudio &msg) {
     this->speaker_buffer_index_ += msg.data.length();
     this->speaker_buffer_size_ += msg.data.length();
     this->speaker_bytes_received_ += msg.data.length();
-    ESP_LOGV(TAG, "Received audio: %" PRId32 " bytes from API", msg.data.length());
+    ESP_LOGV(TAG, "Received audio: %u bytes from API", msg.data.length());
   } else {
     ESP_LOGE(TAG, "Cannot receive audio, buffer is full");
   }

esphome/components/x9c/output.py

@@ -27,7 +27,13 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_INITIAL_VALUE, default=1.0): cv.float_range(
                 min=0.01, max=1.0
             ),
-            cv.Optional(CONF_STEP_DELAY, default=1): cv.int_range(min=1, max=100),
+            cv.Optional(CONF_STEP_DELAY, default="1us"): cv.All(
+                cv.positive_time_period_microseconds,
+                cv.Range(
+                    min=cv.TimePeriod(microseconds=1),
+                    max=cv.TimePeriod(microseconds=100),
+                ),
+            ),
         }
     )
 )

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2024.6.4"
+__version__ = "2024.7.0-dev"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 VALID_SUBSTITUTIONS_CHARACTERS = (
@@ -1070,6 +1070,7 @@ DEVICE_CLASS_BUTTON = "button"
 DEVICE_CLASS_CARBON_DIOXIDE = "carbon_dioxide"
 DEVICE_CLASS_CARBON_MONOXIDE = "carbon_monoxide"
 DEVICE_CLASS_COLD = "cold"
+DEVICE_CLASS_CONDUCTIVITY = "conductivity"
 DEVICE_CLASS_CONNECTIVITY = "connectivity"
 DEVICE_CLASS_CURRENT = "current"
 DEVICE_CLASS_CURTAIN = "curtain"

esphome/cpp_types.py

@@ -10,7 +10,6 @@ int_ = global_ns.namespace("int")
 std_ns = global_ns.namespace("std")
 std_shared_ptr = std_ns.class_("shared_ptr")
 std_string = std_ns.class_("string")
-std_string_ref = std_ns.namespace("string &")
 std_vector = std_ns.class_("vector")
 uint8 = global_ns.namespace("uint8_t")
 uint16 = global_ns.namespace("uint16_t")

esphome/idf_component.yml

@@ -0,0 +1,13 @@
+dependencies:
+  esp-tflite-micro:
+    git: https://github.com/espressif/esp-tflite-micro.git
+    version: v1.3.1
+  esp32_camera:
+    git: https://github.com/espressif/esp32-camera.git
+    version: v2.0.9
+  mdns:
+    git: https://github.com/espressif/esp-protocols.git
+    version: mdns-v1.2.5
+    path: components/mdns
+    rules:
+      - if: "idf_version >=5.0"

platformio.ini

@@ -64,7 +64,7 @@ lib_deps =
     freekode/TM1651@1.0.1                                 ; tm1651
     glmnet/Dsmr@0.7                                       ; dsmr
     rweather/Crypto@0.4.0                                 ; dsmr
-    dudanov/MideaUART@1.1.9                               ; midea
+    dudanov/MideaUART@1.1.8                               ; midea
     tonia/HeatpumpIR@1.0.23                               ; heatpumpir
 build_flags =
     ${common.build_flags}
@@ -142,7 +142,6 @@ platform_packages =
 framework = espidf
 lib_deps =
     ${common:idf.lib_deps}
-    espressif/esp32-camera@1.0.0  ; esp32_camera
     droscy/esp_wireguard@0.4.1    ; wireguard
 build_flags =
     ${common:idf.build_flags}

script/clang-tidy

@@ -101,8 +101,10 @@ def clang_options(idedata):
     # add library include directories using -isystem to suppress their errors
     for directory in sorted(set(idedata["includes"]["build"])):
         # skip our own directories, we add those later
-        if not directory.startswith(f"{root_path}/") or directory.startswith(
+        if (
-            f"{root_path}/.pio/"
+            not directory.startswith(f"{root_path}/")
+            or directory.startswith(f"{root_path}/.pio/")
+            or directory.startswith(f"{root_path}/managed_components/")
         ):
             cmd.extend(["-isystem", directory])
 

script/sync-device_class.py

@@ -10,6 +10,7 @@ from homeassistant.components.event import EventDeviceClass
 from homeassistant.components.number import NumberDeviceClass
 from homeassistant.components.sensor import SensorDeviceClass
 from homeassistant.components.switch import SwitchDeviceClass
+from homeassistant.components.update import UpdateDeviceClass
 from homeassistant.components.valve import ValveDeviceClass
 
 # pylint: enable=import-error
@@ -27,6 +28,7 @@ DOMAINS = {
     "number": NumberDeviceClass,
     "sensor": SensorDeviceClass,
     "switch": SwitchDeviceClass,
+    "update": UpdateDeviceClass,
     "valve": ValveDeviceClass,
 }
 

script/test_build_components

@@ -24,8 +24,8 @@ fi
 
 start_esphome() {
   # create dynamic yaml file in `build` folder.
-  # `./tests/test_build_components/build/[target_component].[test_name].[target_platform].yaml`
+  # `./tests/test_build_components/build/[target_component].[test_name].[target_platform_with_version].yaml`
-  component_test_file="./tests/test_build_components/build/$target_component.$test_name.$target_platform.yaml"
+  component_test_file="./tests/test_build_components/build/$target_component.$test_name.$target_platform_with_version.yaml"
 
   cp $target_platform_file $component_test_file
   if [[ "$OSTYPE" == "darwin"* ]]; then
@@ -36,7 +36,7 @@ start_esphome() {
   fi
 
   # Start esphome process
-  echo "> [$target_component] [$test_name] [$target_platform]"
+  echo "> [$target_component] [$test_name] [$target_platform_with_version]"
   set -x
   # TODO: Validate escape of Command line substitution value
   python -m esphome -s component_name $target_component -s component_dir ../../components/$target_component -s test_name $test_name -s target_platform $target_platform $esphome_command $component_test_file
@@ -76,16 +76,17 @@ for f in ./tests/components/$target_component/*.*.yaml; do
     # 2. `./tests/test_build_components/build_components_base.[target_platform]-ard.yaml`
     target_platform_file="./tests/test_build_components/build_components_base.$target_platform.yaml"
     if ! [ -f "$target_platform_file" ]; then
-      # Try find arduino test framework as platform.
+      echo "No base test file [./tests/test_build_components/build_components_base.$target_platform.yaml] for component test [$f] found."
-      target_platform_ard="$target_platform-ard"
+      exit 1
-      target_platform_file="./tests/test_build_components/build_components_base.$target_platform_ard.yaml"
-      if ! [ -f "$target_platform_file" ]; then
-        echo "No base test file [./tests/test_build_components/build_components_base.$target_platform.yaml, ./tests/build_components_base.$target_platform_ard.yaml] for component test [$f] found."
-        exit 1
-      fi
-      target_platform=$target_platform_ard
     fi
 
-    start_esphome
+    for target_platform_file in ./tests/test_build_components/build_components_base.$target_platform*.yaml; do
+      # trim off "./tests/test_build_components/build_components_base." prefix
+      target_platform_with_version=${target_platform_file:52}
+      # ...now remove suffix starting with "." leaving just the test target hardware and software platform (possibly with version)
+      # For example: "esp32-s3-idf-50"
+      target_platform_with_version=${target_platform_with_version%.*}
+      start_esphome
+    done
   fi
 done

tests/components/a01nyub/common.yaml

@@ -1,9 +1,7 @@
 uart:
   - id: uart_a01nyub
-    tx_pin:
+    tx_pin: ${tx_pin}
-      number: 4
+    rx_pin: ${rx_pin}
-    rx_pin:
-      number: 5
     baud_rate: 9600
 
 sensor:

tests/components/a01nyub/test.esp32-c3-idf.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_a01nyub
+  tx_pin: GPIO4
-    tx_pin:
+  rx_pin: GPIO5
-      number: 4
-    rx_pin:
-      number: 5
-    baud_rate: 9600
 
-sensor:
+<<: !include common.yaml
-  - platform: a01nyub
-    id: a01nyub_sensor
-    name: a01nyub Distance
-    uart_id: uart_a01nyub

tests/components/a01nyub/test.esp32-idf.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_a01nyub
+  tx_pin: GPIO17
-    tx_pin:
+  rx_pin: GPIO16
-      number: 17
-    rx_pin:
-      number: 16
-    baud_rate: 9600
 
-sensor:
+<<: !include common.yaml
-  - platform: a01nyub
-    id: a01nyub_sensor
-    name: a01nyub Distance
-    uart_id: uart_a01nyub

tests/components/a01nyub/test.esp32.yaml

@@ -1,13 +0,0 @@
-uart:
-  - id: uart_a01nyub
-    tx_pin:
-      number: 17
-    rx_pin:
-      number: 16
-    baud_rate: 9600
-
-sensor:
-  - platform: a01nyub
-    id: a01nyub_sensor
-    name: a01nyub Distance
-    uart_id: uart_a01nyub

tests/components/a01nyub/test.esp8266.yaml

@@ -1,13 +0,0 @@
-uart:
-  - id: uart_a01nyub
-    tx_pin:
-      number: 4
-    rx_pin:
-      number: 5
-    baud_rate: 9600
-
-sensor:
-  - platform: a01nyub
-    id: a01nyub_sensor
-    name: a01nyub Distance
-    uart_id: uart_a01nyub

tests/components/a01nyub/test.rp2040.yaml

@@ -1,13 +0,0 @@
-uart:
-  - id: uart_a01nyub
-    tx_pin:
-      number: 4
-    rx_pin:
-      number: 5
-    baud_rate: 9600
-
-sensor:
-  - platform: a01nyub
-    id: a01nyub_sensor
-    name: a01nyub Distance
-    uart_id: uart_a01nyub