Discard changes to .github/workflows/ci.yml

Co-authored-by: Abílio Costa <abmantis@users.noreply.github.com>

.github/actions/build-image/action.yaml

@@ -46,7 +46,7 @@ runs:
 
     - name: Build and push to ghcr by digest
       id: build-ghcr
-      uses: docker/build-push-action@v6.9.0
+      uses: docker/build-push-action@v6.7.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false
@@ -72,7 +72,7 @@ runs:
 
     - name: Build and push to dockerhub by digest
       id: build-dockerhub
-      uses: docker/build-push-action@v6.9.0
+      uses: docker/build-push-action@v6.7.0
       env:
         DOCKER_BUILD_SUMMARY: false
         DOCKER_BUILD_RECORD_UPLOAD: false

.github/actions/restore-python/action.yml

@@ -22,7 +22,7 @@ runs:
         python-version: ${{ inputs.python-version }}
     - name: Restore Python virtual environment
       id: cache-venv
-      uses: actions/cache/restore@v4.1.1
+      uses: actions/cache/restore@v4.0.2
       with:
         path: venv
         # yamllint disable-line rule:line-length

.github/workflows/ci-docker.yml

@@ -46,7 +46,7 @@ jobs:
         with:
           python-version: "3.9"
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.7.1
+        uses: docker/setup-buildx-action@v3.6.1
       - name: Set up QEMU
         uses: docker/setup-qemu-action@v3.2.0
 

.github/workflows/ci.yml

@@ -46,7 +46,7 @@ jobs:
           python-version: ${{ env.DEFAULT_PYTHON }}
       - name: Restore Python virtual environment
         id: cache-venv
-        uses: actions/cache@v4.1.1
+        uses: actions/cache@v4.0.2
         with:
           path: venv
           # yamllint disable-line rule:line-length
@@ -302,22 +302,20 @@ jobs:
 
       - name: Cache platformio
         if: github.ref == 'refs/heads/dev'
-        uses: actions/cache@v4.1.1
+        uses: actions/cache@v4.0.2
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Cache platformio
         if: github.ref != 'refs/heads/dev'
-        uses: actions/cache/restore@v4.1.1
+        uses: actions/cache/restore@v4.0.2
         with:
           path: ~/.platformio
           key: platformio-${{ matrix.pio_cache_key }}
 
       - name: Install clang-tidy
-        run: |
-          sudo apt-get update
-          sudo apt-get install clang-tidy-14
+        run: sudo apt-get install clang-tidy-14
 
       - name: Register problem matchers
         run: |
@@ -399,9 +397,7 @@ jobs:
         file: ${{ fromJson(needs.list-components.outputs.components) }}
     steps:
       - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install libsdl2-dev
+        run: sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7
@@ -455,9 +451,7 @@ jobs:
         run: echo ${{ matrix.components }}
 
       - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install libsdl2-dev
+        run: sudo apt-get install libsdl2-dev
 
       - name: Check out code from GitHub
         uses: actions/checkout@v4.1.7

.github/workflows/codeql.yml

@@ -1,91 +0,0 @@
-# For most projects, this workflow file will not need changing; you simply need
-# to commit it to your repository.
-#
-# You may wish to alter this file to override the set of languages analyzed,
-# or to provide custom queries or build logic.
-#
-# ******** NOTE ********
-# We have attempted to detect the languages in your repository. Please check
-# the `language` matrix defined below to confirm you have the correct set of
-# supported CodeQL languages.
-#
-name: "CodeQL Advanced"
-
-on:
-  workflow_dispatch:
-  schedule:
-    - cron: "30 18 * * 4"
-
-jobs:
-  analyze:
-    name: Analyze (${{ matrix.language }})
-    # Runner size impacts CodeQL analysis time. To learn more, please see:
-    #   - https://gh.io/recommended-hardware-resources-for-running-codeql
-    #   - https://gh.io/supported-runners-and-hardware-resources
-    #   - https://gh.io/using-larger-runners (GitHub.com only)
-    # Consider using larger runners or machines with greater resources for possible analysis time improvements.
-    runs-on: ${{ (matrix.language == 'swift' && 'macos-latest') || 'ubuntu-latest' }}
-    permissions:
-      # required for all workflows
-      security-events: write
-
-      # required to fetch internal or private CodeQL packs
-      packages: read
-
-      # only required for workflows in private repositories
-      actions: read
-      contents: read
-
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          # - language: c-cpp
-          #   build-mode: autobuild
-          - language: python
-            build-mode: none
-            # CodeQL supports the following values keywords for 'language': 'c-cpp', 'csharp', 'go', 'java-kotlin', 'javascript-typescript', 'python', 'ruby', 'swift'
-            # Use `c-cpp` to analyze code written in C, C++ or both
-            # Use 'java-kotlin' to analyze code written in Java, Kotlin or both
-            # Use 'javascript-typescript' to analyze code written in JavaScript, TypeScript or both
-            # To learn more about changing the languages that are analyzed or customizing the build mode for your analysis,
-            # see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/customizing-your-advanced-setup-for-code-scanning.
-            # If you are analyzing a compiled language, you can modify the 'build-mode' for that language to customize how
-            # your codebase is analyzed, see https://docs.github.com/en/code-security/code-scanning/creating-an-advanced-setup-for-code-scanning/codeql-code-scanning-for-compiled-languages
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-
-      # Initializes the CodeQL tools for scanning.
-      - name: Initialize CodeQL
-        uses: github/codeql-action/init@v3
-        with:
-          languages: ${{ matrix.language }}
-          build-mode: ${{ matrix.build-mode }}
-          # If you wish to specify custom queries, you can do so here or in a config file.
-          # By default, queries listed here will override any specified in a config file.
-          # Prefix the list here with "+" to use these queries and those in the config file.
-
-          # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
-          # queries: security-extended,security-and-quality
-
-      # If the analyze step fails for one of the languages you are analyzing with
-      # "We were unable to automatically build your code", modify the matrix above
-      # to set the build mode to "manual" for that language. Then modify this step
-      # to build your code.
-      # ℹ️ Command-line programs to run using the OS shell.
-      # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
-      - if: matrix.build-mode == 'manual'
-        shell: bash
-        run: |
-          echo 'If you are using a "manual" build mode for one or more of the' \
-            'languages you are analyzing, replace this with the commands to build' \
-            'your code, for example:'
-          echo '  make bootstrap'
-          echo '  make release'
-          exit 1
-
-      - name: Perform CodeQL Analysis
-        uses: github/codeql-action/analyze@v3
-        with:
-          category: "/language:${{matrix.language}}"

.github/workflows/release.yml

@@ -65,7 +65,7 @@ jobs:
           pip3 install build
           python3 -m build
       - name: Publish
-        uses: pypa/gh-action-pypi-publish@v1.10.3
+        uses: pypa/gh-action-pypi-publish@v1.10.1
 
   deploy-docker:
     name: Build ESPHome ${{ matrix.platform }}
@@ -90,7 +90,7 @@ jobs:
           python-version: "3.9"
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.7.1
+        uses: docker/setup-buildx-action@v3.6.1
       - name: Set up QEMU
         if: matrix.platform != 'linux/amd64'
         uses: docker/setup-qemu-action@v3.2.0
@@ -141,7 +141,7 @@ jobs:
           echo name=$(cat /tmp/platform) >> $GITHUB_OUTPUT
 
       - name: Upload digests
-        uses: actions/upload-artifact@v4.4.2
+        uses: actions/upload-artifact@v4.4.0
         with:
           name: digests-${{ steps.sanitize.outputs.name }}
           path: /tmp/digests
@@ -184,7 +184,7 @@ jobs:
           merge-multiple: true
 
       - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v3.7.1
+        uses: docker/setup-buildx-action@v3.6.1
 
       - name: Log in to docker hub
         if: matrix.registry == 'dockerhub'

.github/workflows/sync-device-classes.yml

@@ -36,7 +36,7 @@ jobs:
           python ./script/sync-device_class.py
 
       - name: Commit changes
-        uses: peter-evans/create-pull-request@v7.0.5
+        uses: peter-evans/create-pull-request@v7.0.0
         with:
           commit-message: "Synchronise Device Classes from Home Assistant"
           committer: esphomebot <esphome@nabucasa.com>

CODEOWNERS

@@ -24,7 +24,6 @@ esphome/components/ade7953_i2c/* @angelnu
 esphome/components/ade7953_spi/* @angelnu
 esphome/components/ads1118/* @solomondg1
 esphome/components/ags10/* @mak-42
-esphome/components/aic3204/* @kbx81
 esphome/components/airthings_ble/* @jeromelaban
 esphome/components/airthings_wave_base/* @jeromelaban @kpfleming @ncareau
 esphome/components/airthings_wave_mini/* @ncareau
@@ -48,7 +47,6 @@ esphome/components/at581x/* @X-Ryl669
 esphome/components/atc_mithermometer/* @ahpohl
 esphome/components/atm90e26/* @danieltwagner
 esphome/components/atm90e32/* @circuitsetup @descipher
-esphome/components/audio_dac/* @kbx81
 esphome/components/b_parasite/* @rbaron
 esphome/components/ballu/* @bazuchan
 esphome/components/bang_bang/* @OttoWinter
@@ -88,7 +86,7 @@ esphome/components/cap1188/* @mreditor97
 esphome/components/captive_portal/* @OttoWinter
 esphome/components/ccs811/* @habbie
 esphome/components/cd74hc4067/* @asoehlke
-esphome/components/ch422g/* @clydebarrow @jesterret
+esphome/components/ch422g/* @jesterret
 esphome/components/climate/* @esphome/core
 esphome/components/climate_ir/* @glmnet
 esphome/components/color_temperature/* @jesserockz
@@ -138,6 +136,7 @@ esphome/components/esp32_improv/* @jesserockz
 esphome/components/esp32_rmt/* @jesserockz
 esphome/components/esp32_rmt_led_strip/* @jesserockz
 esphome/components/esp8266/* @esphome/core
+esphome/components/esp_adf/* @jesserockz
 esphome/components/ethernet_info/* @gtjadsonsantos
 esphome/components/event/* @nohat
 esphome/components/exposure_notifications/* @OttoWinter
@@ -154,7 +153,6 @@ esphome/components/ft63x6/* @gpambrozio
 esphome/components/gcja5/* @gcormier
 esphome/components/gdk101/* @Szewcson
 esphome/components/globals/* @esphome/core
-esphome/components/gp2y1010au0f/* @zry98
 esphome/components/gp8403/* @jesserockz
 esphome/components/gpio/* @esphome/core
 esphome/components/gpio/one_wire/* @ssieb
@@ -162,7 +160,6 @@ esphome/components/gps/* @coogle
 esphome/components/graph/* @synco
 esphome/components/graphical_display_menu/* @MrMDavidson
 esphome/components/gree/* @orestismers
-esphome/components/grove_gas_mc_v2/* @YorkshireIoT
 esphome/components/grove_tb6612fng/* @max246
 esphome/components/growatt_solar/* @leeuwte
 esphome/components/gt911/* @clydebarrow @jesserockz
@@ -170,7 +167,6 @@ esphome/components/haier/* @paveldn
 esphome/components/haier/binary_sensor/* @paveldn
 esphome/components/haier/button/* @paveldn
 esphome/components/haier/sensor/* @paveldn
-esphome/components/haier/switch/* @paveldn
 esphome/components/haier/text_sensor/* @paveldn
 esphome/components/havells_solar/* @sourabhjaiswal
 esphome/components/hbridge/fan/* @WeekendWarrior
@@ -283,7 +279,6 @@ esphome/components/mopeka_std_check/* @Fabian-Schmidt
 esphome/components/mpl3115a2/* @kbickar
 esphome/components/mpu6886/* @fabaff
 esphome/components/ms8607/* @e28eta
-esphome/components/nau7802/* @cujomalainey
 esphome/components/network/* @esphome/core
 esphome/components/nextion/* @edwardtfn @senexcrenshaw
 esphome/components/nextion/binary_sensor/* @senexcrenshaw
@@ -292,11 +287,9 @@ esphome/components/nextion/switch/* @senexcrenshaw
 esphome/components/nextion/text_sensor/* @senexcrenshaw
 esphome/components/nfc/* @jesserockz @kbx81
 esphome/components/noblex/* @AGalfra
-esphome/components/npi19/* @bakerkj
 esphome/components/number/* @esphome/core
 esphome/components/one_wire/* @ssieb
 esphome/components/online_image/* @guillempages
-esphome/components/opentherm/* @olegtarasov
 esphome/components/ota/* @esphome/core
 esphome/components/output/* @esphome/core
 esphome/components/pca6416a/* @Mat931
@@ -404,11 +397,9 @@ esphome/components/sun_gtil2/* @Mat931
 esphome/components/switch/* @esphome/core
 esphome/components/t6615/* @tylermenezes
 esphome/components/tca9548a/* @andreashergert1984
-esphome/components/tca9555/* @mobrembski
 esphome/components/tcl112/* @glmnet
 esphome/components/tee501/* @Stock-M
 esphome/components/teleinfo/* @0hax
-esphome/components/tem3200/* @bakerkj
 esphome/components/template/alarm_control_panel/* @grahambrown11 @hwstar
 esphome/components/template/datetime/* @rfdarter
 esphome/components/template/event/* @nohat

README.md

@@ -7,5 +7,3 @@
 For issues, please go to [the issue tracker](https://github.com/esphome/issues/issues).
 
 For feature requests, please see [feature requests](https://github.com/esphome/feature-requests/issues).
-
-[![ESPHome - A project from the Open Home Foundation](https://www.openhomefoundation.org/badges/esphome.png)](https://www.openhomefoundation.org/)

docker/Dockerfile

@@ -33,7 +33,7 @@ RUN \
         python3-venv=3.11.2-1+b1 \
         python3-wheel=0.38.4-2 \
         iputils-ping=3:20221126-1 \
-        git=1:2.39.5-0+deb12u1 \
+        git=1:2.39.2-1.1 \
         curl=7.88.1-10+deb12u7 \
         openssh-client=1:9.2p1-2+deb12u3 \
         python3-cffi=1.15.1-5 \

esphome/components/aic3204/aic3204.cpp

@@ -1,173 +0,0 @@
-#include "aic3204.h"
-
-#include "esphome/core/defines.h"
-#include "esphome/core/helpers.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace aic3204 {
-
-static const char *const TAG = "aic3204";
-
-#define ERROR_CHECK(err, msg) \
-  if (!(err)) { \
-    ESP_LOGE(TAG, msg); \
-    this->mark_failed(); \
-    return; \
-  }
-
-void AIC3204::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up AIC3204...");
-
-  // Set register page to 0
-  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set page 0 failed");
-  // Initiate SW reset (PLL is powered off as part of reset)
-  ERROR_CHECK(this->write_byte(AIC3204_SW_RST, 0x01), "Software reset failed");
-  // *** Program clock settings ***
-  // Default is CODEC_CLKIN is from MCLK pin. Don't need to change this.
-  // MDAC*NDAC*FOSR*48Khz = mClk (24.576 MHz when the XMOS is expecting 48kHz audio)
-  // (See page 51 of https://www.ti.com/lit/ml/slaa557/slaa557.pdf)
-  // We do need MDAC*DOSR/32 >= the resource compute level for the processing block
-  // So here 2*128/32 = 8, which is equal to processing block 1 's resource compute
-  // See page 5 of https://www.ti.com/lit/an/slaa404c/slaa404c.pdf for the workflow
-  // for determining these settings.
-
-  // Power up NDAC and set to 2
-  ERROR_CHECK(this->write_byte(AIC3204_NDAC, 0x82), "Set NDAC failed");
-  // Power up MDAC and set to 2
-  ERROR_CHECK(this->write_byte(AIC3204_MDAC, 0x82), "Set MDAC failed");
-  // Program DOSR = 128
-  ERROR_CHECK(this->write_byte(AIC3204_DOSR, 0x80), "Set DOSR failed");
-  // Set Audio Interface Config: I2S, 32 bits, DOUT always driving
-  ERROR_CHECK(this->write_byte(AIC3204_CODEC_IF, 0x30), "Set CODEC_IF failed");
-  // For I2S Firmware only, set SCLK/MFP3 pin as Audio Data In
-  ERROR_CHECK(this->write_byte(AIC3204_SCLK_MFP3, 0x02), "Set SCLK/MFP3 failed");
-  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_4, 0x01), "Set AUDIO_IF_4 failed");
-  ERROR_CHECK(this->write_byte(AIC3204_AUDIO_IF_5, 0x01), "Set AUDIO_IF_5 failed");
-  // Program the DAC processing block to be used - PRB_P1
-  ERROR_CHECK(this->write_byte(AIC3204_DAC_SIG_PROC, 0x01), "Set DAC_SIG_PROC failed");
-
-  // *** Select Page 1 ***
-  ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x01), "Set page 1 failed");
-  // Enable the internal AVDD_LDO:
-  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x09), "Set LDO_CTRL failed");
-  // *** Program Analog Blocks ***
-  // Disable Internal Crude AVdd in presence of external AVdd supply or before powering up internal AVdd LDO
-  ERROR_CHECK(this->write_byte(AIC3204_PWR_CFG, 0x08), "Set PWR_CFG failed");
-  // Enable Master Analog Power Control
-  ERROR_CHECK(this->write_byte(AIC3204_LDO_CTRL, 0x01), "Set LDO_CTRL failed");
-  // Page 125: Common mode control register, set d6 to 1 to make the full chip common mode = 0.75 v
-  // We are using the internal AVdd regulator with a nominal output of 1.72 V (see LDO_CTRL_REGISTER on page 123)
-  // Page 86 says to only set the common mode voltage to 0.9 v if AVdd >= 1.8... but it isn't on our hardware
-  // We also adjust the HPL and HPR gains to -2dB gian later in this config flow compensate (see page 47)
-  // (All pages refer to the TLV320AIC3204 Application Reference Guide)
-  ERROR_CHECK(this->write_byte(AIC3204_CM_CTRL, 0x40), "Set CM_CTRL failed");
-  // *** Set PowerTune Modes ***
-  // Set the Left & Right DAC PowerTune mode to PTM_P3/4. Use Class-AB driver.
-  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG1, 0x00), "Set PLAY_CFG1 failed");
-  ERROR_CHECK(this->write_byte(AIC3204_PLAY_CFG2, 0x00), "Set PLAY_CFG2 failed");
-  // Set the REF charging time to 40ms
-  ERROR_CHECK(this->write_byte(AIC3204_REF_STARTUP, 0x01), "Set REF_STARTUP failed");
-  // HP soft stepping settings for optimal pop performance at power up
-  // Rpop used is 6k with N = 6 and soft step = 20usec. This should work with 47uF coupling
-  // capacitor. Can try N=5,6 or 7 time constants as well. Trade-off delay vs “pop” sound.
-  ERROR_CHECK(this->write_byte(AIC3204_HP_START, 0x25), "Set HP_START failed");
-  // Route Left DAC to HPL
-  ERROR_CHECK(this->write_byte(AIC3204_HPL_ROUTE, 0x08), "Set HPL_ROUTE failed");
-  // Route Right DAC to HPR
-  ERROR_CHECK(this->write_byte(AIC3204_HPR_ROUTE, 0x08), "Set HPR_ROUTE failed");
-  // Route Left DAC to LOL
-  ERROR_CHECK(this->write_byte(AIC3204_LOL_ROUTE, 0x08), "Set LOL_ROUTE failed");
-  // Route Right DAC to LOR
-  ERROR_CHECK(this->write_byte(AIC3204_LOR_ROUTE, 0x08), "Set LOR_ROUTE failed");
-
-  // Unmute HPL and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
-  ERROR_CHECK(this->write_byte(AIC3204_HPL_GAIN, 0x3e), "Set HPL_GAIN failed");
-  // Unmute HPR and set gain to -2dB (see comment before configuring the AIC3204_CM_CTRL register)
-  ERROR_CHECK(this->write_byte(AIC3204_HPR_GAIN, 0x3e), "Set HPR_GAIN failed");
-  // Unmute LOL and set gain to 0dB
-  ERROR_CHECK(this->write_byte(AIC3204_LOL_DRV_GAIN, 0x00), "Set LOL_DRV_GAIN failed");
-  // Unmute LOR and set gain to 0dB
-  ERROR_CHECK(this->write_byte(AIC3204_LOR_DRV_GAIN, 0x00), "Set LOR_DRV_GAIN failed");
-
-  // Power up HPL and HPR, LOL and LOR drivers
-  ERROR_CHECK(this->write_byte(AIC3204_OP_PWR_CTRL, 0x3C), "Set OP_PWR_CTRL failed");
-
-  // Wait for 2.5 sec for soft stepping to take effect before attempting power-up
-  this->set_timeout(2500, [this]() {
-    // *** Power Up DAC ***
-    // Select Page 0
-    ERROR_CHECK(this->write_byte(AIC3204_PAGE_CTRL, 0x00), "Set PAGE_CTRL failed");
-    // Power up the Left and Right DAC Channels. Route Left data to Left DAC and Right data to Right DAC.
-    // DAC Vol control soft step 1 step per DAC word clock.
-    ERROR_CHECK(this->write_byte(AIC3204_DAC_CH_SET1, 0xd4), "Set DAC_CH_SET1 failed");
-    // Set left and right DAC digital volume control
-    ERROR_CHECK(this->write_volume_(), "Set volume failed");
-    // Unmute left and right channels
-    ERROR_CHECK(this->write_mute_(), "Set mute failed");
-  });
-}
-
-void AIC3204::dump_config() {
-  ESP_LOGCONFIG(TAG, "AIC3204:");
-  LOG_I2C_DEVICE(this);
-
-  if (this->is_failed()) {
-    ESP_LOGE(TAG, "Communication with AIC3204 failed");
-  }
-}
-
-bool AIC3204::set_mute_off() {
-  this->is_muted_ = false;
-  return this->write_mute_();
-}
-
-bool AIC3204::set_mute_on() {
-  this->is_muted_ = true;
-  return this->write_mute_();
-}
-
-bool AIC3204::set_auto_mute_mode(uint8_t auto_mute_mode) {
-  this->auto_mute_mode_ = auto_mute_mode & 0x07;
-  ESP_LOGVV(TAG, "Setting auto_mute_mode to 0x%.2x", this->auto_mute_mode_);
-  return this->write_mute_();
-}
-
-bool AIC3204::set_volume(float volume) {
-  this->volume_ = clamp<float>(volume, 0.0, 1.0);
-  return this->write_volume_();
-}
-
-bool AIC3204::is_muted() { return this->is_muted_; }
-
-float AIC3204::volume() { return this->volume_; }
-
-bool AIC3204::write_mute_() {
-  uint8_t mute_mode_byte = this->auto_mute_mode_ << 4;  // auto-mute control is bits 4-6
-  mute_mode_byte |= this->is_muted_ ? 0x0c : 0x00;      // mute bits are 2-3
-  if (!this->write_byte(AIC3204_PAGE_CTRL, 0x00) || !this->write_byte(AIC3204_DAC_CH_SET2, mute_mode_byte)) {
-    ESP_LOGE(TAG, "Writing mute modes failed");
-    return false;
-  }
-  return true;
-}
-
-bool AIC3204::write_volume_() {
-  const int8_t dvc_min_byte = -127;
-  const int8_t dvc_max_byte = 48;
-
-  int8_t volume_byte = dvc_min_byte + (this->volume_ * (dvc_max_byte - dvc_min_byte));
-  volume_byte = clamp<int8_t>(volume_byte, dvc_min_byte, dvc_max_byte);
-
-  ESP_LOGVV(TAG, "Setting volume to 0x%.2x", volume_byte & 0xFF);
-
-  if ((!this->write_byte(AIC3204_PAGE_CTRL, 0x00)) || (!this->write_byte(AIC3204_DACL_VOL_D, volume_byte)) ||
-      (!this->write_byte(AIC3204_DACR_VOL_D, volume_byte))) {
-    ESP_LOGE(TAG, "Writing volume failed");
-    return false;
-  }
-  return true;
-}
-
-}  // namespace aic3204
-}  // namespace esphome

esphome/components/aic3204/aic3204.h

@@ -1,88 +0,0 @@
-#pragma once
-
-#include "esphome/components/audio_dac/audio_dac.h"
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/core/component.h"
-#include "esphome/core/defines.h"
-#include "esphome/core/hal.h"
-
-namespace esphome {
-namespace aic3204 {
-
-// TLV320AIC3204 Register Addresses
-// Page 0
-static const uint8_t AIC3204_PAGE_CTRL = 0x00;     // Register 0  - Page Control
-static const uint8_t AIC3204_SW_RST = 0x01;        // Register 1  - Software Reset
-static const uint8_t AIC3204_CLK_PLL1 = 0x04;      // Register 4  - Clock Setting Register 1, Multiplexers
-static const uint8_t AIC3204_CLK_PLL2 = 0x05;      // Register 5  - Clock Setting Register 2, P and R values
-static const uint8_t AIC3204_CLK_PLL3 = 0x06;      // Register 6  - Clock Setting Register 3, J values
-static const uint8_t AIC3204_NDAC = 0x0B;          // Register 11 - NDAC Divider Value
-static const uint8_t AIC3204_MDAC = 0x0C;          // Register 12 - MDAC Divider Value
-static const uint8_t AIC3204_DOSR = 0x0E;          // Register 14 - DOSR Divider Value (LS Byte)
-static const uint8_t AIC3204_NADC = 0x12;          // Register 18 - NADC Divider Value
-static const uint8_t AIC3204_MADC = 0x13;          // Register 19 - MADC Divider Value
-static const uint8_t AIC3204_AOSR = 0x14;          // Register 20 - AOSR Divider Value
-static const uint8_t AIC3204_CODEC_IF = 0x1B;      // Register 27 - CODEC Interface Control
-static const uint8_t AIC3204_AUDIO_IF_4 = 0x1F;    // Register 31 - Audio Interface Setting Register 4
-static const uint8_t AIC3204_AUDIO_IF_5 = 0x20;    // Register 32 - Audio Interface Setting Register 5
-static const uint8_t AIC3204_SCLK_MFP3 = 0x38;     // Register 56 - SCLK/MFP3 Function Control
-static const uint8_t AIC3204_DAC_SIG_PROC = 0x3C;  // Register 60 - DAC Sig Processing Block Control
-static const uint8_t AIC3204_ADC_SIG_PROC = 0x3D;  // Register 61 - ADC Sig Processing Block Control
-static const uint8_t AIC3204_DAC_CH_SET1 = 0x3F;   // Register 63 - DAC Channel Setup 1
-static const uint8_t AIC3204_DAC_CH_SET2 = 0x40;   // Register 64 - DAC Channel Setup 2
-static const uint8_t AIC3204_DACL_VOL_D = 0x41;    // Register 65 - DAC Left Digital Vol Control
-static const uint8_t AIC3204_DACR_VOL_D = 0x42;    // Register 66 - DAC Right Digital Vol Control
-static const uint8_t AIC3204_DRC_ENABLE = 0x44;
-static const uint8_t AIC3204_ADC_CH_SET = 0x51;    // Register 81 - ADC Channel Setup
-static const uint8_t AIC3204_ADC_FGA_MUTE = 0x52;  // Register 82 - ADC Fine Gain Adjust/Mute
-
-// Page 1
-static const uint8_t AIC3204_PWR_CFG = 0x01;       // Register 1  - Power Config
-static const uint8_t AIC3204_LDO_CTRL = 0x02;      // Register 2  - LDO Control
-static const uint8_t AIC3204_PLAY_CFG1 = 0x03;     // Register 3  - Playback Config 1
-static const uint8_t AIC3204_PLAY_CFG2 = 0x04;     // Register 4  - Playback Config 2
-static const uint8_t AIC3204_OP_PWR_CTRL = 0x09;   // Register 9  - Output Driver Power Control
-static const uint8_t AIC3204_CM_CTRL = 0x0A;       // Register 10 - Common Mode Control
-static const uint8_t AIC3204_HPL_ROUTE = 0x0C;     // Register 12 - HPL Routing Select
-static const uint8_t AIC3204_HPR_ROUTE = 0x0D;     // Register 13 - HPR Routing Select
-static const uint8_t AIC3204_LOL_ROUTE = 0x0E;     // Register 14 - LOL Routing Selection
-static const uint8_t AIC3204_LOR_ROUTE = 0x0F;     // Register 15 - LOR Routing Selection
-static const uint8_t AIC3204_HPL_GAIN = 0x10;      // Register 16 - HPL Driver Gain
-static const uint8_t AIC3204_HPR_GAIN = 0x11;      // Register 17 - HPR Driver Gain
-static const uint8_t AIC3204_LOL_DRV_GAIN = 0x12;  // Register 18 - LOL Driver Gain Setting
-static const uint8_t AIC3204_LOR_DRV_GAIN = 0x13;  // Register 19 - LOR Driver Gain Setting
-static const uint8_t AIC3204_HP_START = 0x14;      // Register 20 - Headphone Driver Startup
-static const uint8_t AIC3204_LPGA_P_ROUTE = 0x34;  // Register 52 - Left PGA Positive Input Route
-static const uint8_t AIC3204_LPGA_N_ROUTE = 0x36;  // Register 54 - Left PGA Negative Input Route
-static const uint8_t AIC3204_RPGA_P_ROUTE = 0x37;  // Register 55 - Right PGA Positive Input Route
-static const uint8_t AIC3204_RPGA_N_ROUTE = 0x39;  // Register 57 - Right PGA Negative Input Route
-static const uint8_t AIC3204_LPGA_VOL = 0x3B;      // Register 59 - Left PGA Volume
-static const uint8_t AIC3204_RPGA_VOL = 0x3C;      // Register 60 - Right PGA Volume
-static const uint8_t AIC3204_ADC_PTM = 0x3D;       // Register 61 - ADC Power Tune Config
-static const uint8_t AIC3204_AN_IN_CHRG = 0x47;    // Register 71 - Analog Input Quick Charging Config
-static const uint8_t AIC3204_REF_STARTUP = 0x7B;   // Register 123 - Reference Power Up Config
-
-class AIC3204 : public audio_dac::AudioDac, public Component, public i2c::I2CDevice {
- public:
-  void setup() override;
-  void dump_config() override;
-  float get_setup_priority() const override { return setup_priority::DATA; }
-
-  bool set_mute_off() override;
-  bool set_mute_on() override;
-  bool set_auto_mute_mode(uint8_t auto_mute_mode);
-  bool set_volume(float volume) override;
-
-  bool is_muted() override;
-  float volume() override;
-
- protected:
-  bool write_mute_();
-  bool write_volume_();
-
-  uint8_t auto_mute_mode_{0};
-  float volume_{0};
-};
-
-}  // namespace aic3204
-}  // namespace esphome

esphome/components/aic3204/audio_dac.py

@@ -1,52 +0,0 @@
-from esphome import automation
-import esphome.codegen as cg
-from esphome.components import i2c
-from esphome.components.audio_dac import AudioDac
-import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_MODE
-
-CODEOWNERS = ["@kbx81"]
-DEPENDENCIES = ["i2c"]
-
-aic3204_ns = cg.esphome_ns.namespace("aic3204")
-AIC3204 = aic3204_ns.class_("AIC3204", AudioDac, cg.Component, i2c.I2CDevice)
-
-SetAutoMuteAction = aic3204_ns.class_("SetAutoMuteAction", automation.Action)
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(AIC3204),
-        }
-    )
-    .extend(cv.COMPONENT_SCHEMA)
-    .extend(i2c.i2c_device_schema(0x18))
-)
-
-
-SET_AUTO_MUTE_ACTION_SCHEMA = cv.maybe_simple_value(
-    {
-        cv.GenerateID(): cv.use_id(AIC3204),
-        cv.Required(CONF_MODE): cv.templatable(cv.int_range(max=7, min=0)),
-    },
-    key=CONF_MODE,
-)
-
-
-@automation.register_action(
-    "aic3204.set_auto_mute_mode", SetAutoMuteAction, SET_AUTO_MUTE_ACTION_SCHEMA
-)
-async def aic3204_set_volume_to_code(config, action_id, template_arg, args):
-    paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-
-    template_ = await cg.templatable(config.get(CONF_MODE), args, int)
-    cg.add(var.set_auto_mute_mode(template_))
-
-    return var
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)

esphome/components/aic3204/automation.h

@@ -1,23 +0,0 @@
-#pragma once
-
-#include "esphome/core/automation.h"
-#include "esphome/core/component.h"
-#include "aic3204.h"
-
-namespace esphome {
-namespace aic3204 {
-
-template<typename... Ts> class SetAutoMuteAction : public Action<Ts...> {
- public:
-  explicit SetAutoMuteAction(AIC3204 *aic3204) : aic3204_(aic3204) {}
-
-  TEMPLATABLE_VALUE(uint8_t, auto_mute_mode)
-
-  void play(Ts... x) override { this->aic3204_->set_auto_mute_mode(this->auto_mute_mode_.value(x...)); }
-
- protected:
-  AIC3204 *aic3204_;
-};
-
-}  // namespace aic3204
-}  // namespace esphome

esphome/components/alarm_control_panel/__init__.py

@@ -9,7 +9,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_STATE,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -195,8 +195,9 @@ async def setup_alarm_control_panel_core_(var, config):
     for conf in config.get(CONF_ON_READY, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
     if mqtt_id := config.get(CONF_MQTT_ID):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)

esphome/components/animation/__init__.py

@@ -1,26 +1,26 @@
 import logging
 
 from esphome import automation, core
-import esphome.codegen as cg
 from esphome.components import font
 import esphome.components.image as espImage
 from esphome.components.image import (
     CONF_USE_TRANSPARENCY,
     LOCAL_SCHEMA,
-    SOURCE_LOCAL,
-    SOURCE_WEB,
     WEB_SCHEMA,
+    SOURCE_WEB,
+    SOURCE_LOCAL,
 )
 import esphome.config_validation as cv
+import esphome.codegen as cg
 from esphome.const import (
     CONF_FILE,
     CONF_ID,
-    CONF_PATH,
     CONF_RAW_DATA_ID,
     CONF_REPEAT,
     CONF_RESIZE,
-    CONF_SOURCE,
     CONF_TYPE,
+    CONF_SOURCE,
+    CONF_PATH,
     CONF_URL,
 )
 from esphome.core import CORE, HexInt
@@ -172,9 +172,6 @@ async def to_code(config):
         path = CORE.relative_config_path(conf_file[CONF_PATH])
     elif conf_file[CONF_SOURCE] == SOURCE_WEB:
         path = espImage.compute_local_image_path(conf_file).as_posix()
-    else:
-        raise core.EsphomeError(f"Unknown animation source: {conf_file[CONF_SOURCE]}")
-
     try:
         image = Image.open(path)
     except Exception as e:
@@ -186,12 +183,13 @@ async def to_code(config):
         new_width_max, new_height_max = config[CONF_RESIZE]
         ratio = min(new_width_max / width, new_height_max / height)
         width, height = int(width * ratio), int(height * ratio)
-    elif width > 500 or height > 500:
-        _LOGGER.warning(
-            'The image "%s" you requested is very big. Please consider'
-            " using the resize parameter.",
-            path,
-        )
+    else:
+        if width > 500 or height > 500:
+            _LOGGER.warning(
+                'The image "%s" you requested is very big. Please consider'
+                " using the resize parameter.",
+                path,
+            )
 
     transparent = config[CONF_USE_TRANSPARENCY]
 
@@ -308,8 +306,6 @@ async def to_code(config):
             if transparent:
                 alpha = image.split()[-1]
                 has_alpha = alpha.getextrema()[0] < 0xFF
-            else:
-                has_alpha = False
             frame = image.convert("1", dither=Image.Dither.NONE)
             if CONF_RESIZE in config:
                 frame = frame.resize([width, height])

esphome/components/api/api.proto

@@ -62,8 +62,6 @@ service APIConnection {
   rpc unsubscribe_bluetooth_le_advertisements(UnsubscribeBluetoothLEAdvertisementsRequest) returns (void) {}
 
   rpc subscribe_voice_assistant(SubscribeVoiceAssistantRequest) returns (void) {}
-  rpc voice_assistant_get_configuration(VoiceAssistantConfigurationRequest) returns (VoiceAssistantConfigurationResponse) {}
-  rpc voice_assistant_set_configuration(VoiceAssistantSetConfiguration) returns (void) {}
 
   rpc alarm_control_panel_command (AlarmControlPanelCommandRequest) returns (void) {}
 }
@@ -1120,7 +1118,6 @@ message MediaPlayerSupportedFormat {
   uint32 sample_rate = 2;
   uint32 num_channels = 3;
   MediaPlayerFormatPurpose purpose = 4;
-  uint32 sample_bytes = 5;
 }
 message ListEntitiesMediaPlayerResponse {
   option (id) = 63;
@@ -1573,36 +1570,6 @@ message VoiceAssistantAnnounceFinished {
   bool success = 1;
 }
 
-message VoiceAssistantWakeWord {
-  string id = 1;
-  string wake_word = 2;
-  repeated string trained_languages = 3;
-}
-
-message VoiceAssistantConfigurationRequest {
-  option (id) = 121;
-  option (source) = SOURCE_CLIENT;
-  option (ifdef) = "USE_VOICE_ASSISTANT";
-}
-
-message VoiceAssistantConfigurationResponse {
-  option (id) = 122;
-  option (source) = SOURCE_SERVER;
-  option (ifdef) = "USE_VOICE_ASSISTANT";
-
-  repeated VoiceAssistantWakeWord available_wake_words = 1;
-  repeated string active_wake_words = 2;
-  uint32 max_active_wake_words = 3;
-}
-
-message VoiceAssistantSetConfiguration {
-  option (id) = 123;
-  option (source) = SOURCE_CLIENT;
-  option (ifdef) = "USE_VOICE_ASSISTANT";
-
-  repeated string active_wake_words = 1;
-}
-
 // ==================== ALARM CONTROL PANEL ====================
 enum AlarmControlPanelState {
   ALARM_STATE_DISARMED = 0;

esphome/components/api/api_connection.cpp

@@ -1,5 +1,4 @@
 #include "api_connection.h"
-#ifdef USE_API
 #include <cerrno>
 #include <cinttypes>
 #include <utility>
@@ -1033,7 +1032,6 @@ bool APIConnection::send_media_player_info(media_player::MediaPlayer *media_play
     media_format.sample_rate = supported_format.sample_rate;
     media_format.num_channels = supported_format.num_channels;
     media_format.purpose = static_cast<enums::MediaPlayerFormatPurpose>(supported_format.purpose);
-    media_format.sample_bytes = supported_format.sample_bytes;
     msg.supported_formats.push_back(media_format);
   }
 
@@ -1225,42 +1223,6 @@ void APIConnection::on_voice_assistant_announce_request(const VoiceAssistantAnno
   }
 }
 
-VoiceAssistantConfigurationResponse APIConnection::voice_assistant_get_configuration(
-    const VoiceAssistantConfigurationRequest &msg) {
-  VoiceAssistantConfigurationResponse resp;
-  if (voice_assistant::global_voice_assistant != nullptr) {
-    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
-      return resp;
-    }
-
-    auto &config = voice_assistant::global_voice_assistant->get_configuration();
-    for (auto &wake_word : config.available_wake_words) {
-      VoiceAssistantWakeWord resp_wake_word;
-      resp_wake_word.id = wake_word.id;
-      resp_wake_word.wake_word = wake_word.wake_word;
-      for (const auto &lang : wake_word.trained_languages) {
-        resp_wake_word.trained_languages.push_back(lang);
-      }
-      resp.available_wake_words.push_back(std::move(resp_wake_word));
-    }
-    for (auto &wake_word_id : config.active_wake_words) {
-      resp.active_wake_words.push_back(wake_word_id);
-    }
-    resp.max_active_wake_words = config.max_active_wake_words;
-  }
-  return resp;
-}
-
-void APIConnection::voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
-  if (voice_assistant::global_voice_assistant != nullptr) {
-    if (voice_assistant::global_voice_assistant->get_api_connection() != this) {
-      return;
-    }
-
-    voice_assistant::global_voice_assistant->on_set_configuration(msg.active_wake_words);
-  }
-}
-
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -1569,4 +1531,3 @@ void APIConnection::on_fatal_error() {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/api_connection.h

@@ -1,13 +1,12 @@
 #pragma once
 
-#include "esphome/core/defines.h"
-#ifdef USE_API
 #include "api_frame_helper.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
 #include "api_server.h"
 #include "esphome/core/application.h"
 #include "esphome/core/component.h"
+#include "esphome/core/defines.h"
 
 #include <vector>
 
@@ -153,9 +152,6 @@ class APIConnection : public APIServerConnection {
   void on_voice_assistant_audio(const VoiceAssistantAudio &msg) override;
   void on_voice_assistant_timer_event_response(const VoiceAssistantTimerEventResponse &msg) override;
   void on_voice_assistant_announce_request(const VoiceAssistantAnnounceRequest &msg) override;
-  VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
-      const VoiceAssistantConfigurationRequest &msg) override;
-  void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
 #endif
 
 #ifdef USE_ALARM_CONTROL_PANEL
@@ -269,4 +265,3 @@ class APIConnection : public APIServerConnection {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/api_frame_helper.cpp

@@ -1,5 +1,5 @@
 #include "api_frame_helper.h"
-#ifdef USE_API
+
 #include "esphome/core/log.h"
 #include "esphome/core/hal.h"
 #include "esphome/core/helpers.h"
@@ -1028,4 +1028,3 @@ APIError APIPlaintextFrameHelper::shutdown(int how) {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/api_frame_helper.h

@@ -5,7 +5,7 @@
 #include <vector>
 
 #include "esphome/core/defines.h"
-#ifdef USE_API
+
 #ifdef USE_API_NOISE
 #include "noise/protocol.h"
 #endif
@@ -190,4 +190,3 @@ class APIPlaintextFrameHelper : public APIFrameHelper {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/api_pb2.cpp

@@ -5149,10 +5149,6 @@ bool MediaPlayerSupportedFormat::decode_varint(uint32_t field_id, ProtoVarInt va
       this->purpose = value.as_enum<enums::MediaPlayerFormatPurpose>();
       return true;
     }
-    case 5: {
-      this->sample_bytes = value.as_uint32();
-      return true;
-    }
     default:
       return false;
   }
@@ -5172,7 +5168,6 @@ void MediaPlayerSupportedFormat::encode(ProtoWriteBuffer buffer) const {
   buffer.encode_uint32(2, this->sample_rate);
   buffer.encode_uint32(3, this->num_channels);
   buffer.encode_enum<enums::MediaPlayerFormatPurpose>(4, this->purpose);
-  buffer.encode_uint32(5, this->sample_bytes);
 }
 #ifdef HAS_PROTO_MESSAGE_DUMP
 void MediaPlayerSupportedFormat::dump_to(std::string &out) const {
@@ -5195,11 +5190,6 @@ void MediaPlayerSupportedFormat::dump_to(std::string &out) const {
   out.append("  purpose: ");
   out.append(proto_enum_to_string<enums::MediaPlayerFormatPurpose>(this->purpose));
   out.append("\n");
-
-  out.append("  sample_bytes: ");
-  sprintf(buffer, "%" PRIu32, this->sample_bytes);
-  out.append(buffer);
-  out.append("\n");
   out.append("}");
 }
 #endif
@@ -7124,140 +7114,6 @@ void VoiceAssistantAnnounceFinished::dump_to(std::string &out) const {
   out.append("}");
 }
 #endif
-bool VoiceAssistantWakeWord::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
-  switch (field_id) {
-    case 1: {
-      this->id = value.as_string();
-      return true;
-    }
-    case 2: {
-      this->wake_word = value.as_string();
-      return true;
-    }
-    case 3: {
-      this->trained_languages.push_back(value.as_string());
-      return true;
-    }
-    default:
-      return false;
-  }
-}
-void VoiceAssistantWakeWord::encode(ProtoWriteBuffer buffer) const {
-  buffer.encode_string(1, this->id);
-  buffer.encode_string(2, this->wake_word);
-  for (auto &it : this->trained_languages) {
-    buffer.encode_string(3, it, true);
-  }
-}
-#ifdef HAS_PROTO_MESSAGE_DUMP
-void VoiceAssistantWakeWord::dump_to(std::string &out) const {
-  __attribute__((unused)) char buffer[64];
-  out.append("VoiceAssistantWakeWord {\n");
-  out.append("  id: ");
-  out.append("'").append(this->id).append("'");
-  out.append("\n");
-
-  out.append("  wake_word: ");
-  out.append("'").append(this->wake_word).append("'");
-  out.append("\n");
-
-  for (const auto &it : this->trained_languages) {
-    out.append("  trained_languages: ");
-    out.append("'").append(it).append("'");
-    out.append("\n");
-  }
-  out.append("}");
-}
-#endif
-void VoiceAssistantConfigurationRequest::encode(ProtoWriteBuffer buffer) const {}
-#ifdef HAS_PROTO_MESSAGE_DUMP
-void VoiceAssistantConfigurationRequest::dump_to(std::string &out) const {
-  out.append("VoiceAssistantConfigurationRequest {}");
-}
-#endif
-bool VoiceAssistantConfigurationResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
-  switch (field_id) {
-    case 3: {
-      this->max_active_wake_words = value.as_uint32();
-      return true;
-    }
-    default:
-      return false;
-  }
-}
-bool VoiceAssistantConfigurationResponse::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
-  switch (field_id) {
-    case 1: {
-      this->available_wake_words.push_back(value.as_message<VoiceAssistantWakeWord>());
-      return true;
-    }
-    case 2: {
-      this->active_wake_words.push_back(value.as_string());
-      return true;
-    }
-    default:
-      return false;
-  }
-}
-void VoiceAssistantConfigurationResponse::encode(ProtoWriteBuffer buffer) const {
-  for (auto &it : this->available_wake_words) {
-    buffer.encode_message<VoiceAssistantWakeWord>(1, it, true);
-  }
-  for (auto &it : this->active_wake_words) {
-    buffer.encode_string(2, it, true);
-  }
-  buffer.encode_uint32(3, this->max_active_wake_words);
-}
-#ifdef HAS_PROTO_MESSAGE_DUMP
-void VoiceAssistantConfigurationResponse::dump_to(std::string &out) const {
-  __attribute__((unused)) char buffer[64];
-  out.append("VoiceAssistantConfigurationResponse {\n");
-  for (const auto &it : this->available_wake_words) {
-    out.append("  available_wake_words: ");
-    it.dump_to(out);
-    out.append("\n");
-  }
-
-  for (const auto &it : this->active_wake_words) {
-    out.append("  active_wake_words: ");
-    out.append("'").append(it).append("'");
-    out.append("\n");
-  }
-
-  out.append("  max_active_wake_words: ");
-  sprintf(buffer, "%" PRIu32, this->max_active_wake_words);
-  out.append(buffer);
-  out.append("\n");
-  out.append("}");
-}
-#endif
-bool VoiceAssistantSetConfiguration::decode_length(uint32_t field_id, ProtoLengthDelimited value) {
-  switch (field_id) {
-    case 1: {
-      this->active_wake_words.push_back(value.as_string());
-      return true;
-    }
-    default:
-      return false;
-  }
-}
-void VoiceAssistantSetConfiguration::encode(ProtoWriteBuffer buffer) const {
-  for (auto &it : this->active_wake_words) {
-    buffer.encode_string(1, it, true);
-  }
-}
-#ifdef HAS_PROTO_MESSAGE_DUMP
-void VoiceAssistantSetConfiguration::dump_to(std::string &out) const {
-  __attribute__((unused)) char buffer[64];
-  out.append("VoiceAssistantSetConfiguration {\n");
-  for (const auto &it : this->active_wake_words) {
-    out.append("  active_wake_words: ");
-    out.append("'").append(it).append("'");
-    out.append("\n");
-  }
-  out.append("}");
-}
-#endif
 bool ListEntitiesAlarmControlPanelResponse::decode_varint(uint32_t field_id, ProtoVarInt value) {
   switch (field_id) {
     case 6: {

esphome/components/api/api_pb2.h

@@ -1277,7 +1277,6 @@ class MediaPlayerSupportedFormat : public ProtoMessage {
   uint32_t sample_rate{0};
   uint32_t num_channels{0};
   enums::MediaPlayerFormatPurpose purpose{};
-  uint32_t sample_bytes{0};
   void encode(ProtoWriteBuffer buffer) const override;
 #ifdef HAS_PROTO_MESSAGE_DUMP
   void dump_to(std::string &out) const override;
@@ -1849,53 +1848,6 @@ class VoiceAssistantAnnounceFinished : public ProtoMessage {
  protected:
   bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
 };
-class VoiceAssistantWakeWord : public ProtoMessage {
- public:
-  std::string id{};
-  std::string wake_word{};
-  std::vector<std::string> trained_languages{};
-  void encode(ProtoWriteBuffer buffer) const override;
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  void dump_to(std::string &out) const override;
-#endif
-
- protected:
-  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
-};
-class VoiceAssistantConfigurationRequest : public ProtoMessage {
- public:
-  void encode(ProtoWriteBuffer buffer) const override;
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  void dump_to(std::string &out) const override;
-#endif
-
- protected:
-};
-class VoiceAssistantConfigurationResponse : public ProtoMessage {
- public:
-  std::vector<VoiceAssistantWakeWord> available_wake_words{};
-  std::vector<std::string> active_wake_words{};
-  uint32_t max_active_wake_words{0};
-  void encode(ProtoWriteBuffer buffer) const override;
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  void dump_to(std::string &out) const override;
-#endif
-
- protected:
-  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
-  bool decode_varint(uint32_t field_id, ProtoVarInt value) override;
-};
-class VoiceAssistantSetConfiguration : public ProtoMessage {
- public:
-  std::vector<std::string> active_wake_words{};
-  void encode(ProtoWriteBuffer buffer) const override;
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  void dump_to(std::string &out) const override;
-#endif
-
- protected:
-  bool decode_length(uint32_t field_id, ProtoLengthDelimited value) override;
-};
 class ListEntitiesAlarmControlPanelResponse : public ProtoMessage {
  public:
   std::string object_id{};

esphome/components/api/api_pb2_service.cpp

@@ -496,19 +496,6 @@ bool APIServerConnectionBase::send_voice_assistant_announce_finished(const Voice
   return this->send_message_<VoiceAssistantAnnounceFinished>(msg, 120);
 }
 #endif
-#ifdef USE_VOICE_ASSISTANT
-#endif
-#ifdef USE_VOICE_ASSISTANT
-bool APIServerConnectionBase::send_voice_assistant_configuration_response(
-    const VoiceAssistantConfigurationResponse &msg) {
-#ifdef HAS_PROTO_MESSAGE_DUMP
-  ESP_LOGVV(TAG, "send_voice_assistant_configuration_response: %s", msg.dump().c_str());
-#endif
-  return this->send_message_<VoiceAssistantConfigurationResponse>(msg, 122);
-}
-#endif
-#ifdef USE_VOICE_ASSISTANT
-#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 bool APIServerConnectionBase::send_list_entities_alarm_control_panel_response(
     const ListEntitiesAlarmControlPanelResponse &msg) {
@@ -1169,28 +1156,6 @@ bool APIServerConnectionBase::read_message(uint32_t msg_size, uint32_t msg_type,
       ESP_LOGVV(TAG, "on_voice_assistant_announce_request: %s", msg.dump().c_str());
 #endif
       this->on_voice_assistant_announce_request(msg);
-#endif
-      break;
-    }
-    case 121: {
-#ifdef USE_VOICE_ASSISTANT
-      VoiceAssistantConfigurationRequest msg;
-      msg.decode(msg_data, msg_size);
-#ifdef HAS_PROTO_MESSAGE_DUMP
-      ESP_LOGVV(TAG, "on_voice_assistant_configuration_request: %s", msg.dump().c_str());
-#endif
-      this->on_voice_assistant_configuration_request(msg);
-#endif
-      break;
-    }
-    case 123: {
-#ifdef USE_VOICE_ASSISTANT
-      VoiceAssistantSetConfiguration msg;
-      msg.decode(msg_data, msg_size);
-#ifdef HAS_PROTO_MESSAGE_DUMP
-      ESP_LOGVV(TAG, "on_voice_assistant_set_configuration: %s", msg.dump().c_str());
-#endif
-      this->on_voice_assistant_set_configuration(msg);
 #endif
       break;
     }
@@ -1681,35 +1646,6 @@ void APIServerConnection::on_subscribe_voice_assistant_request(const SubscribeVo
   this->subscribe_voice_assistant(msg);
 }
 #endif
-#ifdef USE_VOICE_ASSISTANT
-void APIServerConnection::on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) {
-  if (!this->is_connection_setup()) {
-    this->on_no_setup_connection();
-    return;
-  }
-  if (!this->is_authenticated()) {
-    this->on_unauthenticated_access();
-    return;
-  }
-  VoiceAssistantConfigurationResponse ret = this->voice_assistant_get_configuration(msg);
-  if (!this->send_voice_assistant_configuration_response(ret)) {
-    this->on_fatal_error();
-  }
-}
-#endif
-#ifdef USE_VOICE_ASSISTANT
-void APIServerConnection::on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) {
-  if (!this->is_connection_setup()) {
-    this->on_no_setup_connection();
-    return;
-  }
-  if (!this->is_authenticated()) {
-    this->on_unauthenticated_access();
-    return;
-  }
-  this->voice_assistant_set_configuration(msg);
-}
-#endif
 #ifdef USE_ALARM_CONTROL_PANEL
 void APIServerConnection::on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) {
   if (!this->is_connection_setup()) {

esphome/components/api/api_pb2_service.h

@@ -253,15 +253,6 @@ class APIServerConnectionBase : public ProtoService {
 #ifdef USE_VOICE_ASSISTANT
   bool send_voice_assistant_announce_finished(const VoiceAssistantAnnounceFinished &msg);
 #endif
-#ifdef USE_VOICE_ASSISTANT
-  virtual void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &value){};
-#endif
-#ifdef USE_VOICE_ASSISTANT
-  bool send_voice_assistant_configuration_response(const VoiceAssistantConfigurationResponse &msg);
-#endif
-#ifdef USE_VOICE_ASSISTANT
-  virtual void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &value){};
-#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   bool send_list_entities_alarm_control_panel_response(const ListEntitiesAlarmControlPanelResponse &msg);
 #endif
@@ -434,13 +425,6 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   virtual void subscribe_voice_assistant(const SubscribeVoiceAssistantRequest &msg) = 0;
 #endif
-#ifdef USE_VOICE_ASSISTANT
-  virtual VoiceAssistantConfigurationResponse voice_assistant_get_configuration(
-      const VoiceAssistantConfigurationRequest &msg) = 0;
-#endif
-#ifdef USE_VOICE_ASSISTANT
-  virtual void voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) = 0;
-#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   virtual void alarm_control_panel_command(const AlarmControlPanelCommandRequest &msg) = 0;
 #endif
@@ -542,12 +526,6 @@ class APIServerConnection : public APIServerConnectionBase {
 #ifdef USE_VOICE_ASSISTANT
   void on_subscribe_voice_assistant_request(const SubscribeVoiceAssistantRequest &msg) override;
 #endif
-#ifdef USE_VOICE_ASSISTANT
-  void on_voice_assistant_configuration_request(const VoiceAssistantConfigurationRequest &msg) override;
-#endif
-#ifdef USE_VOICE_ASSISTANT
-  void on_voice_assistant_set_configuration(const VoiceAssistantSetConfiguration &msg) override;
-#endif
 #ifdef USE_ALARM_CONTROL_PANEL
   void on_alarm_control_panel_command_request(const AlarmControlPanelCommandRequest &msg) override;
 #endif

esphome/components/api/api_server.cpp

@@ -1,5 +1,4 @@
 #include "api_server.h"
-#ifdef USE_API
 #include <cerrno>
 #include "api_connection.h"
 #include "esphome/components/network/util.h"
@@ -404,4 +403,3 @@ void APIServer::on_alarm_control_panel_update(alarm_control_panel::AlarmControlP
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/api_server.h

@@ -1,7 +1,5 @@
 #pragma once
 
-#include "esphome/core/defines.h"
-#ifdef USE_API
 #include "api_noise_context.h"
 #include "api_pb2.h"
 #include "api_pb2_service.h"
@@ -9,6 +7,7 @@
 #include "esphome/core/automation.h"
 #include "esphome/core/component.h"
 #include "esphome/core/controller.h"
+#include "esphome/core/defines.h"
 #include "esphome/core/log.h"
 #include "list_entities.h"
 #include "subscribe_state.h"
@@ -154,4 +153,3 @@ template<typename... Ts> class APIConnectedCondition : public Condition<Ts...> {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/custom_api_device.h

@@ -1,9 +1,9 @@
 #pragma once
 
 #include <map>
-#include "api_server.h"
-#ifdef USE_API
 #include "user_services.h"
+#include "api_server.h"
+
 namespace esphome {
 namespace api {
 
@@ -216,4 +216,3 @@ class CustomAPIDevice {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/homeassistant_service.h

@@ -1,10 +1,10 @@
 #pragma once
 
-#include "api_server.h"
-#ifdef USE_API
-#include "api_pb2.h"
 #include "esphome/core/helpers.h"
 #include "esphome/core/automation.h"
+#include "api_pb2.h"
+#include "api_server.h"
+
 #include <vector>
 
 namespace esphome {
@@ -81,4 +81,3 @@ template<typename... Ts> class HomeAssistantServiceCallAction : public Action<Ts
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/list_entities.cpp

@@ -1,5 +1,4 @@
 #include "list_entities.h"
-#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/application.h"
 #include "esphome/core/log.h"
@@ -105,4 +104,3 @@ bool ListEntitiesIterator::on_update(update::UpdateEntity *update) { return this
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/list_entities.h

@@ -1,9 +1,9 @@
 #pragma once
 
-#include "esphome/core/defines.h"
-#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
+#include "esphome/core/defines.h"
+
 namespace esphome {
 namespace api {
 
@@ -87,4 +87,3 @@ class ListEntitiesIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/subscribe_state.cpp

@@ -1,5 +1,4 @@
 #include "subscribe_state.h"
-#ifdef USE_API
 #include "api_connection.h"
 #include "esphome/core/log.h"
 
@@ -85,4 +84,3 @@ InitialStateIterator::InitialStateIterator(APIConnection *client) : client_(clie
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/api/subscribe_state.h

@@ -1,10 +1,10 @@
 #pragma once
 
-#include "esphome/core/defines.h"
-#ifdef USE_API
 #include "esphome/core/component.h"
 #include "esphome/core/component_iterator.h"
 #include "esphome/core/controller.h"
+#include "esphome/core/defines.h"
+
 namespace esphome {
 namespace api {
 
@@ -82,4 +82,3 @@ class InitialStateIterator : public ComponentIterator {
 
 }  // namespace api
 }  // namespace esphome
-#endif

esphome/components/audio_dac/__init__.py

@@ -1,57 +0,0 @@
-from esphome import automation
-from esphome.automation import maybe_simple_id
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_VOLUME
-from esphome.core import coroutine_with_priority
-
-CODEOWNERS = ["@kbx81"]
-IS_PLATFORM_COMPONENT = True
-
-audio_dac_ns = cg.esphome_ns.namespace("audio_dac")
-AudioDac = audio_dac_ns.class_("AudioDac")
-
-MuteOffAction = audio_dac_ns.class_("MuteOffAction", automation.Action)
-MuteOnAction = audio_dac_ns.class_("MuteOnAction", automation.Action)
-SetVolumeAction = audio_dac_ns.class_("SetVolumeAction", automation.Action)
-
-
-MUTE_ACTION_SCHEMA = maybe_simple_id(
-    {
-        cv.GenerateID(): cv.use_id(AudioDac),
-    }
-)
-
-SET_VOLUME_ACTION_SCHEMA = cv.maybe_simple_value(
-    {
-        cv.GenerateID(): cv.use_id(AudioDac),
-        cv.Required(CONF_VOLUME): cv.templatable(cv.percentage),
-    },
-    key=CONF_VOLUME,
-)
-
-
-@automation.register_action("audio_dac.mute_off", MuteOffAction, MUTE_ACTION_SCHEMA)
-@automation.register_action("audio_dac.mute_on", MuteOnAction, MUTE_ACTION_SCHEMA)
-async def audio_dac_mute_action_to_code(config, action_id, template_arg, args):
-    paren = await cg.get_variable(config[CONF_ID])
-    return cg.new_Pvariable(action_id, template_arg, paren)
-
-
-@automation.register_action(
-    "audio_dac.set_volume", SetVolumeAction, SET_VOLUME_ACTION_SCHEMA
-)
-async def audio_dac_set_volume_to_code(config, action_id, template_arg, args):
-    paren = await cg.get_variable(config[CONF_ID])
-    var = cg.new_Pvariable(action_id, template_arg, paren)
-
-    template_ = await cg.templatable(config.get(CONF_VOLUME), args, float)
-    cg.add(var.set_volume(template_))
-
-    return var
-
-
-@coroutine_with_priority(100.0)
-async def to_code(config):
-    cg.add_define("USE_AUDIO_DAC")
-    cg.add_global(audio_dac_ns.using)

esphome/components/audio_dac/audio_dac.h

@@ -1,23 +0,0 @@
-#pragma once
-
-#include "esphome/core/defines.h"
-#include "esphome/core/hal.h"
-
-namespace esphome {
-namespace audio_dac {
-
-class AudioDac {
- public:
-  virtual bool set_mute_off() = 0;
-  virtual bool set_mute_on() = 0;
-  virtual bool set_volume(float volume) = 0;
-
-  virtual bool is_muted() = 0;
-  virtual float volume() = 0;
-
- protected:
-  bool is_muted_{false};
-};
-
-}  // namespace audio_dac
-}  // namespace esphome

esphome/components/audio_dac/automation.h

@@ -1,43 +0,0 @@
-#pragma once
-
-#include "esphome/core/automation.h"
-#include "esphome/core/component.h"
-#include "audio_dac.h"
-
-namespace esphome {
-namespace audio_dac {
-
-template<typename... Ts> class MuteOffAction : public Action<Ts...> {
- public:
-  explicit MuteOffAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
-
-  void play(Ts... x) override { this->audio_dac_->set_mute_off(); }
-
- protected:
-  AudioDac *audio_dac_;
-};
-
-template<typename... Ts> class MuteOnAction : public Action<Ts...> {
- public:
-  explicit MuteOnAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
-
-  void play(Ts... x) override { this->audio_dac_->set_mute_on(); }
-
- protected:
-  AudioDac *audio_dac_;
-};
-
-template<typename... Ts> class SetVolumeAction : public Action<Ts...> {
- public:
-  explicit SetVolumeAction(AudioDac *audio_dac) : audio_dac_(audio_dac) {}
-
-  TEMPLATABLE_VALUE(float, volume)
-
-  void play(Ts... x) override { this->audio_dac_->set_volume(this->volume_.value(x...)); }
-
- protected:
-  AudioDac *audio_dac_;
-};
-
-}  // namespace audio_dac
-}  // namespace esphome

esphome/components/bang_bang/bang_bang_climate.cpp

@@ -157,11 +157,8 @@ void BangBangClimate::switch_to_action_(climate::ClimateAction action) {
     default:
       trig = nullptr;
   }
-  if (trig != nullptr) {
-    trig->trigger();
-  } else {
-    ESP_LOGW(TAG, "trig not set - unsupported action");
-  }
+  assert(trig != nullptr);
+  trig->trigger();
   this->action = action;
   this->prev_trigger_ = trig;
   this->publish_state();

esphome/components/bedjet/bedjet_codec.cpp

@@ -13,10 +13,8 @@ float bedjet_temp_to_f(const uint8_t temp) {
 
 /** Cleans up the packet before sending. */
 BedjetPacket *BedjetCodec::clean_packet_() {
-  // So far no commands require more than 2 bytes of data
-  if (this->packet_.data_length > 2) {
-    ESP_LOGW(TAG, "Packet may be malformed");
-  }
+  // So far no commands require more than 2 bytes of data.
+  assert(this->packet_.data_length <= 2);
   for (int i = this->packet_.data_length; i < 2; i++) {
     this->packet_.data[i] = '\0';
   }

esphome/components/binary_sensor/__init__.py

@@ -25,7 +25,7 @@ from esphome.const import (
     CONF_STATE,
     CONF_TIMING,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_BATTERY_CHARGING,
     DEVICE_CLASS_CARBON_MONOXIDE,
@@ -543,8 +543,9 @@ async def setup_binary_sensor_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_binary_sensor(var, config):

esphome/components/bl0906/sensor.py

@@ -145,9 +145,8 @@ FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
     ),
 )
 async def reset_energy_to_code(config, action_id, template_arg, args):
-    var = cg.new_Pvariable(action_id, template_arg)
-    await cg.register_parented(var, config[CONF_ID])
-    return var
+    paren = await cg.get_variable(config[CONF_ID])
+    return cg.new_Pvariable(action_id, template_arg, paren)
 
 
 async def to_code(config):

esphome/components/ble_presence/binary_sensor.py

@@ -41,7 +41,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Optional(CONF_SERVICE_UUID): esp32_ble_tracker.bt_uuid,
             cv.Optional(CONF_IBEACON_MAJOR): cv.uint16_t,
             cv.Optional(CONF_IBEACON_MINOR): cv.uint16_t,
-            cv.Optional(CONF_IBEACON_UUID): esp32_ble_tracker.bt_uuid,
+            cv.Optional(CONF_IBEACON_UUID): cv.uuid,
             cv.Optional(CONF_TIMEOUT, default="5min"): cv.positive_time_period,
             cv.Optional(CONF_MIN_RSSI): cv.All(
                 cv.decibel, cv.int_range(min=-100, max=-30)
@@ -83,7 +83,7 @@ async def to_code(config):
             cg.add(var.set_service_uuid128(uuid128))
 
     if ibeacon_uuid := config.get(CONF_IBEACON_UUID):
-        ibeacon_uuid = esp32_ble_tracker.as_reversed_hex_array(ibeacon_uuid)
+        ibeacon_uuid = esp32_ble_tracker.as_hex_array(str(ibeacon_uuid))
         cg.add(var.set_ibeacon_uuid(ibeacon_uuid))
 
         if (ibeacon_major := config.get(CONF_IBEACON_MAJOR)) is not None:

esphome/components/button/__init__.py

@@ -11,7 +11,7 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_PRESS,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
     DEVICE_CLASS_EMPTY,
     DEVICE_CLASS_IDENTIFY,
     DEVICE_CLASS_RESTART,
@@ -97,8 +97,9 @@ async def setup_button_core_(var, config):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_button(var, config):

esphome/components/ch422g/__init__.py

@@ -1,20 +1,18 @@
 from esphome import pins
 import esphome.codegen as cg
 from esphome.components import i2c
-from esphome.components.i2c import I2CBus
 import esphome.config_validation as cv
 from esphome.const import (
-    CONF_I2C_ID,
     CONF_ID,
     CONF_INPUT,
     CONF_INVERTED,
     CONF_MODE,
     CONF_NUMBER,
-    CONF_OPEN_DRAIN,
     CONF_OUTPUT,
+    CONF_RESTORE_VALUE,
 )
 
-CODEOWNERS = ["@jesterret", "@clydebarrow"]
+CODEOWNERS = ["@jesterret"]
 DEPENDENCIES = ["i2c"]
 MULTI_CONF = True
 ch422g_ns = cg.esphome_ns.namespace("ch422g")
@@ -25,36 +23,29 @@ CH422GGPIOPin = ch422g_ns.class_(
 )
 
 CONF_CH422G = "ch422g"
-
-# Note that no address is configurable - each register in the CH422G has a dedicated i2c address
-CONFIG_SCHEMA = cv.Schema(
-    {
-        cv.GenerateID(CONF_ID): cv.declare_id(CH422GComponent),
-        cv.GenerateID(CONF_I2C_ID): cv.use_id(I2CBus),
-    }
-).extend(cv.COMPONENT_SCHEMA)
+CONFIG_SCHEMA = (
+    cv.Schema(
+        {
+            cv.Required(CONF_ID): cv.declare_id(CH422GComponent),
+            cv.Optional(CONF_RESTORE_VALUE, default=False): cv.boolean,
+        }
+    )
+    .extend(cv.COMPONENT_SCHEMA)
+    .extend(i2c.i2c_device_schema(0x24))
+)
 
 
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
+    cg.add(var.set_restore_value(config[CONF_RESTORE_VALUE]))
     await cg.register_component(var, config)
-    # Can't use register_i2c_device because there is no CONF_ADDRESS
-    parent = await cg.get_variable(config[CONF_I2C_ID])
-    cg.add(var.set_i2c_bus(parent))
-
-
-# This is used as a final validation step so that modes have been fully transformed.
-def pin_mode_check(pin_config, _):
-    if pin_config[CONF_MODE][CONF_INPUT] and pin_config[CONF_NUMBER] >= 8:
-        raise cv.Invalid("CH422G only supports input on pins 0-7")
-    if pin_config[CONF_MODE][CONF_OPEN_DRAIN] and pin_config[CONF_NUMBER] < 8:
-        raise cv.Invalid("CH422G only supports open drain output on pins 8-11")
+    await i2c.register_i2c_device(var, config)
 
 
 CH422G_PIN_SCHEMA = pins.gpio_base_schema(
     CH422GGPIOPin,
-    cv.int_range(min=0, max=11),
-    modes=[CONF_INPUT, CONF_OUTPUT, CONF_OPEN_DRAIN],
+    cv.int_range(min=0, max=7),
+    modes=[CONF_INPUT, CONF_OUTPUT],
 ).extend(
     {
         cv.Required(CONF_CH422G): cv.use_id(CH422GComponent),
@@ -62,7 +53,7 @@ CH422G_PIN_SCHEMA = pins.gpio_base_schema(
 )
 
 
-@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA, pin_mode_check)
+@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA)
 async def ch422g_pin_to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     parent = await cg.get_variable(config[CONF_CH422G])

esphome/components/ch422g/ch422g.cpp

@@ -4,33 +4,33 @@
 namespace esphome {
 namespace ch422g {
 
-static const uint8_t CH422G_REG_MODE = 0x24;
-static const uint8_t CH422G_MODE_OUTPUT = 0x01;      // enables output mode on 0-7
-static const uint8_t CH422G_MODE_OPEN_DRAIN = 0x04;  // enables open drain mode on 8-11
-static const uint8_t CH422G_REG_IN = 0x26;           // read reg for input bits
-static const uint8_t CH422G_REG_OUT = 0x38;          // write reg for output bits 0-7
-static const uint8_t CH422G_REG_OUT_UPPER = 0x23;    // write reg for output bits 8-11
+const uint8_t CH422G_REG_IN = 0x26;
+const uint8_t CH422G_REG_OUT = 0x38;
+const uint8_t OUT_REG_DEFAULT_VAL = 0xdf;
 
 static const char *const TAG = "ch422g";
 
 void CH422GComponent::setup() {
   ESP_LOGCONFIG(TAG, "Setting up CH422G...");
-  // set outputs before mode
-  this->write_outputs_();
-  // Set mode and check for errors
-  if (!this->set_mode_(this->mode_value_) || !this->read_inputs_()) {
+  // Test to see if device exists
+  if (!this->read_inputs_()) {
     ESP_LOGE(TAG, "CH422G not detected at 0x%02X", this->address_);
     this->mark_failed();
     return;
   }
 
-  ESP_LOGCONFIG(TAG, "Initialization complete. Warning: %d, Error: %d", this->status_has_warning(),
-                this->status_has_error());
+  // restore defaults over whatever got saved on last boot
+  if (!this->restore_value_) {
+    this->write_output_(OUT_REG_DEFAULT_VAL);
+  }
+
+  ESP_LOGD(TAG, "Initialization complete. Warning: %d, Error: %d", this->status_has_warning(),
+           this->status_has_error());
 }
 
 void CH422GComponent::loop() {
   // Clear all the previously read flags.
-  this->pin_read_flags_ = 0x00;
+  this->pin_read_cache_ = 0x00;
 }
 
 void CH422GComponent::dump_config() {
@@ -41,82 +41,68 @@ void CH422GComponent::dump_config() {
   }
 }
 
-void CH422GComponent::pin_mode(uint8_t pin, gpio::Flags flags) {
-  if (pin < 8) {
-    if (flags & gpio::FLAG_OUTPUT) {
-      this->mode_value_ |= CH422G_MODE_OUTPUT;
-    }
-  } else {
-    if (flags & gpio::FLAG_OPEN_DRAIN) {
-      this->mode_value_ |= CH422G_MODE_OPEN_DRAIN;
-    }
-  }
-}
+// ch422g doesn't have any flag support (needs docs?)
+void CH422GComponent::pin_mode(uint8_t pin, gpio::Flags flags) {}
 
 bool CH422GComponent::digital_read(uint8_t pin) {
-  if (this->pin_read_flags_ == 0 || this->pin_read_flags_ & (1 << pin)) {
+  if (this->pin_read_cache_ == 0 || this->pin_read_cache_ & (1 << pin)) {
     // Read values on first access or in case it's being read again in the same loop
     this->read_inputs_();
   }
 
-  this->pin_read_flags_ |= (1 << pin);
-  return (this->input_bits_ & (1 << pin)) != 0;
+  this->pin_read_cache_ |= (1 << pin);
+  return this->state_mask_ & (1 << pin);
 }
 
 void CH422GComponent::digital_write(uint8_t pin, bool value) {
   if (value) {
-    this->output_bits_ |= (1 << pin);
+    this->write_output_(this->state_mask_ | (1 << pin));
   } else {
-    this->output_bits_ &= ~(1 << pin);
+    this->write_output_(this->state_mask_ & ~(1 << pin));
   }
-  this->write_outputs_();
 }
 
 bool CH422GComponent::read_inputs_() {
   if (this->is_failed()) {
     return false;
   }
-  uint8_t result;
-  // reading inputs requires the chip to be in input mode, possibly temporarily.
-  if (this->mode_value_ & CH422G_MODE_OUTPUT) {
-    this->set_mode_(this->mode_value_ & ~CH422G_MODE_OUTPUT);
-    result = this->read_reg_(CH422G_REG_IN);
-    this->set_mode_(this->mode_value_);
-  } else {
-    result = this->read_reg_(CH422G_REG_IN);
-  }
-  this->input_bits_ = result;
-  this->status_clear_warning();
-  return true;
-}
 
-// Write a register. Can't use the standard write_byte() method because there is no single pre-configured i2c address.
-bool CH422GComponent::write_reg_(uint8_t reg, uint8_t value) {
-  auto err = this->bus_->write(reg, &value, 1);
-  if (err != i2c::ERROR_OK) {
-    this->status_set_warning(str_sprintf("write failed for register 0x%X, error %d", reg, err).c_str());
+  uint8_t temp = 0;
+  if ((this->last_error_ = this->read(&temp, 1)) != esphome::i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("read_inputs_(): I2C I/O error: %d", (int) this->last_error_).c_str());
     return false;
   }
+
+  uint8_t output = 0;
+  if ((this->last_error_ = this->bus_->read(CH422G_REG_IN, &output, 1)) != esphome::i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("read_inputs_(): I2C I/O error: %d", (int) this->last_error_).c_str());
+    return false;
+  }
+
+  this->state_mask_ = output;
   this->status_clear_warning();
+
   return true;
 }
 
-uint8_t CH422GComponent::read_reg_(uint8_t reg) {
-  uint8_t value;
-  auto err = this->bus_->read(reg, &value, 1);
-  if (err != i2c::ERROR_OK) {
-    this->status_set_warning(str_sprintf("read failed for register 0x%X, error %d", reg, err).c_str());
-    return 0;
+bool CH422GComponent::write_output_(uint8_t value) {
+  const uint8_t temp = 1;
+  if ((this->last_error_ = this->write(&temp, 1, false)) != esphome::i2c::ERROR_OK) {
+    this->status_set_warning(str_sprintf("write_output_(): I2C I/O error: %d", (int) this->last_error_).c_str());
+    return false;
   }
+
+  uint8_t write_mask = value;
+  if ((this->last_error_ = this->bus_->write(CH422G_REG_OUT, &write_mask, 1)) != esphome::i2c::ERROR_OK) {
+    this->status_set_warning(
+        str_sprintf("write_output_(): I2C I/O error: %d for write_mask: %d", (int) this->last_error_, (int) write_mask)
+            .c_str());
+    return false;
+  }
+
+  this->state_mask_ = value;
   this->status_clear_warning();
-  return value;
-}
-
-bool CH422GComponent::set_mode_(uint8_t mode) { return this->write_reg_(CH422G_REG_MODE, mode); }
-
-bool CH422GComponent::write_outputs_() {
-  return this->write_reg_(CH422G_REG_OUT, static_cast<uint8_t>(this->output_bits_)) &&
-         this->write_reg_(CH422G_REG_OUT_UPPER, static_cast<uint8_t>(this->output_bits_ >> 8));
+  return true;
 }
 
 float CH422GComponent::get_setup_priority() const { return setup_priority::IO; }
@@ -125,15 +111,12 @@ float CH422GComponent::get_setup_priority() const { return setup_priority::IO; }
 // before other components call our digital_read() method.
 float CH422GComponent::get_loop_priority() const { return 9.0f; }  // Just after WIFI
 
+void CH422GGPIOPin::setup() { pin_mode(flags_); }
 void CH422GGPIOPin::pin_mode(gpio::Flags flags) { this->parent_->pin_mode(this->pin_, flags); }
-bool CH422GGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) ^ this->inverted_; }
+bool CH422GGPIOPin::digital_read() { return this->parent_->digital_read(this->pin_) != this->inverted_; }
 
-void CH422GGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value ^ this->inverted_); }
+void CH422GGPIOPin::digital_write(bool value) { this->parent_->digital_write(this->pin_, value != this->inverted_); }
 std::string CH422GGPIOPin::dump_summary() const { return str_sprintf("EXIO%u via CH422G", pin_); }
-void CH422GGPIOPin::set_flags(gpio::Flags flags) {
-  flags_ = flags;
-  this->parent_->pin_mode(this->pin_, flags);
-}
 
 }  // namespace ch422g
 }  // namespace esphome

esphome/components/ch422g/ch422g.h

@@ -23,30 +23,32 @@ class CH422GComponent : public Component, public i2c::I2CDevice {
   void pin_mode(uint8_t pin, gpio::Flags flags);
 
   float get_setup_priority() const override;
+
   float get_loop_priority() const override;
+
   void dump_config() override;
 
+  void set_restore_value(bool restore_value) { this->restore_value_ = restore_value; }
+
  protected:
-  bool write_reg_(uint8_t reg, uint8_t value);
-  uint8_t read_reg_(uint8_t reg);
-  bool set_mode_(uint8_t mode);
   bool read_inputs_();
-  bool write_outputs_();
+
+  bool write_output_(uint8_t value);
 
   /// The mask to write as output state - 1 means HIGH, 0 means LOW
-  uint16_t output_bits_{0x00};
+  uint8_t state_mask_{0x00};
   /// Flags to check if read previously during this loop
-  uint8_t pin_read_flags_ = {0x00};
-  /// Copy of last read values
-  uint8_t input_bits_ = {0x00};
-  /// Copy of the mode value
-  uint8_t mode_value_{};
+  uint8_t pin_read_cache_ = {0x00};
+  /// Storage for last I2C error seen
+  esphome::i2c::ErrorCode last_error_;
+  /// Whether we want to override stored values on expander
+  bool restore_value_{false};
 };
 
-/// Helper class to expose a CH422G pin as a GPIO pin.
+/// Helper class to expose a CH422G pin as an internal input GPIO pin.
 class CH422GGPIOPin : public GPIOPin {
  public:
-  void setup() override{};
+  void setup() override;
   void pin_mode(gpio::Flags flags) override;
   bool digital_read() override;
   void digital_write(bool value) override;
@@ -55,13 +57,13 @@ class CH422GGPIOPin : public GPIOPin {
   void set_parent(CH422GComponent *parent) { parent_ = parent; }
   void set_pin(uint8_t pin) { pin_ = pin; }
   void set_inverted(bool inverted) { inverted_ = inverted; }
-  void set_flags(gpio::Flags flags);
+  void set_flags(gpio::Flags flags) { flags_ = flags; }
 
  protected:
-  CH422GComponent *parent_{};
-  uint8_t pin_{};
-  bool inverted_{};
-  gpio::Flags flags_{};
+  CH422GComponent *parent_;
+  uint8_t pin_;
+  bool inverted_;
+  gpio::Flags flags_;
 };
 
 }  // namespace ch422g

esphome/components/climate/__init__.py

@@ -43,7 +43,7 @@ from esphome.const import (
     CONF_TEMPERATURE_STEP,
     CONF_TRIGGER_ID,
     CONF_VISUAL,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -408,8 +408,9 @@ async def setup_climate_core_(var, config):
             trigger, [(ClimateCall.operator("ref"), "x")], conf
         )
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
 
 async def register_climate(var, config):

esphome/components/cover/__init__.py

@@ -17,7 +17,7 @@ from esphome.const import (
     CONF_TILT_COMMAND_TOPIC,
     CONF_TILT_STATE_TOPIC,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
     DEVICE_CLASS_AWNING,
     DEVICE_CLASS_BLIND,
     DEVICE_CLASS_CURTAIN,
@@ -137,6 +137,10 @@ async def setup_cover_core_(var, config):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [], conf)
 
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
+
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
@@ -152,9 +156,6 @@ async def setup_cover_core_(var, config):
         if (tilt_command_topic := config.get(CONF_TILT_COMMAND_TOPIC)) is not None:
             cg.add(mqtt_.set_custom_tilt_command_topic(tilt_command_topic))
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
-
 
 async def register_cover(var, config):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/cse7766/cse7766.cpp

@@ -147,7 +147,6 @@ void CSE7766Component::parse_data_() {
   float power = 0.0f;
   if (power_cycle_exceeds_range) {
     // Datasheet: power cycle exceeding range means active power is 0
-    have_power = true;
     if (this->power_sensor_ != nullptr) {
       this->power_sensor_->publish_state(0.0f);
     }
@@ -179,15 +178,6 @@ void CSE7766Component::parse_data_() {
     if (this->apparent_power_sensor_ != nullptr) {
       this->apparent_power_sensor_->publish_state(apparent_power);
     }
-    if (have_power && this->reactive_power_sensor_ != nullptr) {
-      const float reactive_power = apparent_power - power;
-      if (reactive_power < 0.0f) {
-        ESP_LOGD(TAG, "Impossible reactive power: %.4f is negative", reactive_power);
-        this->reactive_power_sensor_->publish_state(0.0f);
-      } else {
-        this->reactive_power_sensor_->publish_state(reactive_power);
-      }
-    }
     if (this->power_factor_sensor_ != nullptr && (have_power || power_cycle_exceeds_range)) {
       float pf = NAN;
       if (apparent_power > 0) {
@@ -242,9 +232,8 @@ void CSE7766Component::dump_config() {
   LOG_SENSOR("  ", "Power", this->power_sensor_);
   LOG_SENSOR("  ", "Energy", this->energy_sensor_);
   LOG_SENSOR("  ", "Apparent Power", this->apparent_power_sensor_);
-  LOG_SENSOR("  ", "Reactive Power", this->reactive_power_sensor_);
   LOG_SENSOR("  ", "Power Factor", this->power_factor_sensor_);
-  this->check_uart_settings(4800, 1, uart::UART_CONFIG_PARITY_EVEN);
+  this->check_uart_settings(4800);
 }
 
 }  // namespace cse7766

esphome/components/cse7766/cse7766.h

@@ -16,9 +16,6 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   void set_apparent_power_sensor(sensor::Sensor *apparent_power_sensor) {
     apparent_power_sensor_ = apparent_power_sensor;
   }
-  void set_reactive_power_sensor(sensor::Sensor *reactive_power_sensor) {
-    reactive_power_sensor_ = reactive_power_sensor;
-  }
   void set_power_factor_sensor(sensor::Sensor *power_factor_sensor) { power_factor_sensor_ = power_factor_sensor; }
 
   void loop() override;
@@ -38,7 +35,6 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   sensor::Sensor *power_sensor_{nullptr};
   sensor::Sensor *energy_sensor_{nullptr};
   sensor::Sensor *apparent_power_sensor_{nullptr};
-  sensor::Sensor *reactive_power_sensor_{nullptr};
   sensor::Sensor *power_factor_sensor_{nullptr};
   uint32_t cf_pulses_total_{0};
   uint16_t cf_pulses_last_{0};

esphome/components/cse7766/sensor.py

@@ -8,21 +8,18 @@ from esphome.const import (
     CONF_ID,
     CONF_POWER,
     CONF_POWER_FACTOR,
-    CONF_REACTIVE_POWER,
     CONF_VOLTAGE,
     DEVICE_CLASS_APPARENT_POWER,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_POWER_FACTOR,
-    DEVICE_CLASS_REACTIVE_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
     UNIT_AMPERE,
     UNIT_VOLT,
     UNIT_VOLT_AMPS,
-    UNIT_VOLT_AMPS_REACTIVE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )
@@ -65,12 +62,6 @@ CONFIG_SCHEMA = cv.Schema(
             device_class=DEVICE_CLASS_APPARENT_POWER,
             state_class=STATE_CLASS_MEASUREMENT,
         ),
-        cv.Optional(CONF_REACTIVE_POWER): sensor.sensor_schema(
-            unit_of_measurement=UNIT_VOLT_AMPS_REACTIVE,
-            accuracy_decimals=1,
-            device_class=DEVICE_CLASS_REACTIVE_POWER,
-            state_class=STATE_CLASS_MEASUREMENT,
-        ),
         cv.Optional(CONF_POWER_FACTOR): sensor.sensor_schema(
             accuracy_decimals=2,
             device_class=DEVICE_CLASS_POWER_FACTOR,
@@ -79,7 +70,7 @@ CONFIG_SCHEMA = cv.Schema(
     }
 ).extend(uart.UART_DEVICE_SCHEMA)
 FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
-    "cse7766", baud_rate=4800, parity="EVEN", require_rx=True
+    "cse7766", baud_rate=4800, require_rx=True
 )
 
 
@@ -103,9 +94,6 @@ async def to_code(config):
     if apparent_power_config := config.get(CONF_APPARENT_POWER):
         sens = await sensor.new_sensor(apparent_power_config)
         cg.add(var.set_apparent_power_sensor(sens))
-    if reactive_power_config := config.get(CONF_REACTIVE_POWER):
-        sens = await sensor.new_sensor(reactive_power_config)
-        cg.add(var.set_reactive_power_sensor(sens))
     if power_factor_config := config.get(CONF_POWER_FACTOR):
         sens = await sensor.new_sensor(power_factor_config)
         cg.add(var.set_power_factor_sensor(sens))

esphome/components/cst816/touchscreen/__init__.py

@@ -1,11 +1,12 @@
-from esphome import pins
 import esphome.codegen as cg
-from esphome.components import i2c, touchscreen
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_INTERRUPT_PIN, CONF_RESET_PIN
 
+from esphome import pins
+from esphome.components import i2c, touchscreen
+from esphome.const import CONF_INTERRUPT_PIN, CONF_ID, CONF_RESET_PIN
 from .. import cst816_ns
 
+
 CST816Touchscreen = cst816_ns.class_(
     "CST816Touchscreen",
     touchscreen.Touchscreen,
@@ -13,14 +14,11 @@ CST816Touchscreen = cst816_ns.class_(
 )
 
 CST816ButtonListener = cst816_ns.class_("CST816ButtonListener")
-
-CONF_SKIP_PROBE = "skip_probe"
 CONFIG_SCHEMA = touchscreen.TOUCHSCREEN_SCHEMA.extend(
     {
         cv.GenerateID(): cv.declare_id(CST816Touchscreen),
         cv.Optional(CONF_INTERRUPT_PIN): pins.internal_gpio_input_pin_schema,
         cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
-        cv.Optional(CONF_SKIP_PROBE, default=False): cv.boolean,
     }
 ).extend(i2c.i2c_device_schema(0x15))
 
@@ -30,7 +28,6 @@ async def to_code(config):
     await touchscreen.register_touchscreen(var, config)
     await i2c.register_i2c_device(var, config)
 
-    cg.add(var.set_skip_probe(config[CONF_SKIP_PROBE]))
     if interrupt_pin := config.get(CONF_INTERRUPT_PIN):
         cg.add(var.set_interrupt_pin(await cg.gpio_pin_expression(interrupt_pin)))
     if reset_pin := config.get(CONF_RESET_PIN):

esphome/components/cst816/touchscreen/cst816_touchscreen.cpp

@@ -8,33 +8,32 @@ void CST816Touchscreen::continue_setup_() {
     this->interrupt_pin_->setup();
     this->attach_interrupt_(this->interrupt_pin_, gpio::INTERRUPT_FALLING_EDGE);
   }
-  if (this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
-    switch (this->chip_id_) {
-      case CST820_CHIP_ID:
-      case CST826_CHIP_ID:
-      case CST716_CHIP_ID:
-      case CST816S_CHIP_ID:
-      case CST816D_CHIP_ID:
-      case CST816T_CHIP_ID:
-        break;
-      default:
-        this->mark_failed();
-        this->status_set_error(str_sprintf("Unknown chip ID 0x%02X", this->chip_id_).c_str());
-        return;
-    }
-    this->write_byte(REG_IRQ_CTL, IRQ_EN_MOTION);
-  } else if (!this->skip_probe_) {
-    this->status_set_error("Failed to read chip id");
+  if (!this->read_byte(REG_CHIP_ID, &this->chip_id_)) {
     this->mark_failed();
+    esph_log_e(TAG, "Failed to read chip id");
     return;
   }
+  switch (this->chip_id_) {
+    case CST820_CHIP_ID:
+    case CST826_CHIP_ID:
+    case CST716_CHIP_ID:
+    case CST816S_CHIP_ID:
+    case CST816D_CHIP_ID:
+    case CST816T_CHIP_ID:
+      break;
+    default:
+      this->mark_failed();
+      esph_log_e(TAG, "Unknown chip ID 0x%02X", this->chip_id_);
+      return;
+  }
+  this->write_byte(REG_IRQ_CTL, IRQ_EN_MOTION);
   if (this->x_raw_max_ == this->x_raw_min_) {
     this->x_raw_max_ = this->display_->get_native_width();
   }
   if (this->y_raw_max_ == this->y_raw_min_) {
     this->y_raw_max_ = this->display_->get_native_height();
   }
-  ESP_LOGCONFIG(TAG, "CST816 Touchscreen setup complete");
+  esph_log_config(TAG, "CST816 Touchscreen setup complete");
 }
 
 void CST816Touchscreen::update_button_state_(bool state) {
@@ -46,7 +45,7 @@ void CST816Touchscreen::update_button_state_(bool state) {
 }
 
 void CST816Touchscreen::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up CST816 Touchscreen...");
+  esph_log_config(TAG, "Setting up CST816 Touchscreen...");
   if (this->reset_pin_ != nullptr) {
     this->reset_pin_->setup();
     this->reset_pin_->digital_write(true);
@@ -74,7 +73,7 @@ void CST816Touchscreen::update_touches() {
 
   uint16_t x = encode_uint16(data[REG_XPOS_HIGH] & 0xF, data[REG_XPOS_LOW]);
   uint16_t y = encode_uint16(data[REG_YPOS_HIGH] & 0xF, data[REG_YPOS_LOW]);
-  ESP_LOGV(TAG, "Read touch %d/%d", x, y);
+  esph_log_v(TAG, "Read touch %d/%d", x, y);
   if (x >= this->x_raw_max_) {
     this->update_button_state_(true);
   } else {

esphome/components/cst816/touchscreen/cst816_touchscreen.h

@@ -45,7 +45,6 @@ class CST816Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice
 
   void set_interrupt_pin(InternalGPIOPin *pin) { this->interrupt_pin_ = pin; }
   void set_reset_pin(GPIOPin *pin) { this->reset_pin_ = pin; }
-  void set_skip_probe(bool skip_probe) { this->skip_probe_ = skip_probe; }
 
  protected:
   void continue_setup_();
@@ -54,7 +53,6 @@ class CST816Touchscreen : public touchscreen::Touchscreen, public i2c::I2CDevice
   InternalGPIOPin *interrupt_pin_{};
   GPIOPin *reset_pin_{};
   uint8_t chip_id_{};
-  bool skip_probe_{};  // if set, do not expect to be able to probe the controller on the i2c bus.
   std::vector<CST816ButtonListener *> button_listeners_;
   bool button_touched_{};
 };

esphome/components/datetime/__init__.py

@@ -18,7 +18,7 @@ from esphome.const import (
     CONF_TIME_ID,
     CONF_TRIGGER_ID,
     CONF_TYPE,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
     CONF_YEAR,
 )
 from esphome.core import CORE, coroutine_with_priority
@@ -26,6 +26,7 @@ from esphome.cpp_generator import MockObjClass
 from esphome.cpp_helpers import setup_entity
 
 CODEOWNERS = ["@rfdarter", "@jesserockz"]
+DEPENDENCIES = ["time"]
 
 IS_PLATFORM_COMPONENT = True
 
@@ -61,28 +62,20 @@ DATETIME_MODES = [
 ]
 
 
-def _validate_time_present(config):
-    config = config.copy()
-    if CONF_ON_TIME in config and CONF_TIME_ID not in config:
-        time_id = cv.use_id(time.RealTimeClock)(None)
-        config[CONF_TIME_ID] = time_id
-    return config
-
-
-_DATETIME_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
-    web_server.WEBSERVER_SORTING_SCHEMA,
-    cv.MQTT_COMMAND_COMPONENT_SCHEMA,
-    cv.Schema(
+_DATETIME_SCHEMA = (
+    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
+    .extend(cv.MQTT_COMMAND_COMPONENT_SCHEMA)
+    .extend(
         {
             cv.Optional(CONF_ON_VALUE): automation.validate_automation(
                 {
                     cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(DateTimeStateTrigger),
                 }
             ),
-            cv.Optional(CONF_TIME_ID): cv.use_id(time.RealTimeClock),
+            cv.GenerateID(CONF_TIME_ID): cv.use_id(time.RealTimeClock),
         }
-    ),
-).add_extra(_validate_time_present)
+    )
+)
 
 
 def date_schema(class_: MockObjClass) -> cv.Schema:
@@ -138,15 +131,15 @@ async def setup_datetime_core_(var, config):
     if (mqtt_id := config.get(CONF_MQTT_ID)) is not None:
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
     for conf in config.get(CONF_ON_VALUE, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
         await automation.build_automation(trigger, [(cg.ESPTime, "x")], conf)
 
-    if CONF_TIME_ID in config:
-        rtc = await cg.get_variable(config[CONF_TIME_ID])
-        cg.add(var.set_rtc(rtc))
+    rtc = await cg.get_variable(config[CONF_TIME_ID])
+    cg.add(var.set_rtc(rtc))
 
     for conf in config.get(CONF_ON_TIME, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID])

esphome/components/datetime/datetime_base.h

@@ -4,9 +4,8 @@
 #include "esphome/core/component.h"
 #include "esphome/core/entity_base.h"
 #include "esphome/core/time.h"
-#ifdef USE_TIME
+
 #include "esphome/components/time/real_time_clock.h"
-#endif
 
 namespace esphome {
 namespace datetime {
@@ -20,29 +19,23 @@ class DateTimeBase : public EntityBase {
 
   void add_on_state_callback(std::function<void()> &&callback) { this->state_callback_.add(std::move(callback)); }
 
-#ifdef USE_TIME
   void set_rtc(time::RealTimeClock *rtc) { this->rtc_ = rtc; }
   time::RealTimeClock *get_rtc() const { return this->rtc_; }
-#endif
 
  protected:
   CallbackManager<void()> state_callback_;
 
-#ifdef USE_TIME
   time::RealTimeClock *rtc_;
-#endif
 
   bool has_state_{false};
 };
 
-#ifdef USE_TIME
 class DateTimeStateTrigger : public Trigger<ESPTime> {
  public:
   explicit DateTimeStateTrigger(DateTimeBase *parent) {
     parent->add_on_state_callback([this, parent]() { this->trigger(parent->state_as_esptime()); });
   }
 };
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/datetime_entity.cpp

@@ -192,7 +192,6 @@ void DateTimeEntityRestoreState::apply(DateTimeEntity *time) {
   time->publish_state();
 }
 
-#ifdef USE_TIME
 static const int MAX_TIMESTAMP_DRIFT = 900;  // how far can the clock drift before we consider
                                              // there has been a drastic time synchronization
 
@@ -246,7 +245,6 @@ bool OnDateTimeTrigger::matches_(const ESPTime &time) const {
          time.day_of_month == this->parent_->day && time.hour == this->parent_->hour &&
          time.minute == this->parent_->minute && time.second == this->parent_->second;
 }
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/datetime_entity.h

@@ -134,7 +134,6 @@ template<typename... Ts> class DateTimeSetAction : public Action<Ts...>, public
   }
 };
 
-#ifdef USE_TIME
 class OnDateTimeTrigger : public Trigger<>, public Component, public Parented<DateTimeEntity> {
  public:
   void loop() override;
@@ -144,7 +143,6 @@ class OnDateTimeTrigger : public Trigger<>, public Component, public Parented<Da
 
   optional<ESPTime> last_check_;
 };
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/time_entity.cpp

@@ -94,7 +94,6 @@ void TimeEntityRestoreState::apply(TimeEntity *time) {
   time->publish_state();
 }
 
-#ifdef USE_TIME
 static const int MAX_TIMESTAMP_DRIFT = 900;  // how far can the clock drift before we consider
                                              // there has been a drastic time synchronization
 
@@ -146,7 +145,6 @@ bool OnTimeTrigger::matches_(const ESPTime &time) const {
   return time.is_valid() && time.hour == this->parent_->hour && time.minute == this->parent_->minute &&
          time.second == this->parent_->second;
 }
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/datetime/time_entity.h

@@ -113,7 +113,6 @@ template<typename... Ts> class TimeSetAction : public Action<Ts...>, public Pare
   }
 };
 
-#ifdef USE_TIME
 class OnTimeTrigger : public Trigger<>, public Component, public Parented<TimeEntity> {
  public:
   void loop() override;
@@ -123,7 +122,6 @@ class OnTimeTrigger : public Trigger<>, public Component, public Parented<TimeEn
 
   optional<ESPTime> last_check_;
 };
-#endif
 
 }  // namespace datetime
 }  // namespace esphome

esphome/components/esp32/__init__.py

@@ -13,7 +13,6 @@ from esphome.const import (
     CONF_COMPONENTS,
     CONF_ESPHOME,
     CONF_FRAMEWORK,
-    CONF_IGNORE_EFUSE_CUSTOM_MAC,
     CONF_IGNORE_EFUSE_MAC_CRC,
     CONF_NAME,
     CONF_PATH,
@@ -53,7 +52,6 @@ from .const import (  # noqa
     KEY_SDKCONFIG_OPTIONS,
     KEY_SUBMODULES,
     KEY_VARIANT,
-    VARIANT_ESP32,
     VARIANT_FRIENDLY,
     VARIANTS,
 )
@@ -241,7 +239,7 @@ ARDUINO_PLATFORM_VERSION = cv.Version(5, 4, 0)
 # The default/recommended esp-idf framework version
 #  - https://github.com/espressif/esp-idf/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/tool/framework-espidf
-RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 8)
+RECOMMENDED_ESP_IDF_FRAMEWORK_VERSION = cv.Version(4, 4, 7)
 # The platformio/espressif32 version to use for esp-idf frameworks
 #  - https://github.com/platformio/platform-espressif32/releases
 #  - https://api.registry.platformio.org/v3/packages/platformio/platform/espressif32
@@ -377,15 +375,6 @@ def final_validate(config):
             f"Please specify {CONF_FLASH_SIZE} within esp32 configuration only"
         )
 
-    if (
-        config[CONF_VARIANT] != VARIANT_ESP32
-        and CONF_ADVANCED in (conf_fw := config[CONF_FRAMEWORK])
-        and CONF_IGNORE_EFUSE_MAC_CRC in conf_fw[CONF_ADVANCED]
-    ):
-        raise cv.Invalid(
-            f"{CONF_IGNORE_EFUSE_MAC_CRC} is not supported on {config[CONF_VARIANT]}"
-        )
-
     return config
 
 
@@ -412,10 +401,7 @@ ESP_IDF_FRAMEWORK_SCHEMA = cv.All(
             },
             cv.Optional(CONF_ADVANCED, default={}): cv.Schema(
                 {
-                    cv.Optional(
-                        CONF_IGNORE_EFUSE_CUSTOM_MAC, default=False
-                    ): cv.boolean,
-                    cv.Optional(CONF_IGNORE_EFUSE_MAC_CRC): cv.boolean,
+                    cv.Optional(CONF_IGNORE_EFUSE_MAC_CRC, default=False): cv.boolean,
                 }
             ),
             cv.Optional(CONF_COMPONENTS, default=[]): cv.ensure_list(
@@ -540,10 +526,8 @@ async def to_code(config):
         for name, value in conf[CONF_SDKCONFIG_OPTIONS].items():
             add_idf_sdkconfig_option(name, RawSdkconfigValue(value))
 
-        if conf[CONF_ADVANCED][CONF_IGNORE_EFUSE_CUSTOM_MAC]:
-            cg.add_define("USE_ESP32_IGNORE_EFUSE_CUSTOM_MAC")
-        if conf[CONF_ADVANCED].get(CONF_IGNORE_EFUSE_MAC_CRC):
-            add_idf_sdkconfig_option("CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR", True)
+        if conf[CONF_ADVANCED][CONF_IGNORE_EFUSE_MAC_CRC]:
+            cg.add_define("USE_ESP32_IGNORE_EFUSE_MAC_CRC")
             if (framework_ver.major, framework_ver.minor) >= (4, 4):
                 add_idf_sdkconfig_option(
                     "CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE", False

esphome/components/esp32_ble/ble_uuid.cpp

@@ -31,13 +31,6 @@ ESPBTUUID ESPBTUUID::from_raw(const uint8_t *data) {
   memcpy(ret.uuid_.uuid.uuid128, data, ESP_UUID_LEN_128);
   return ret;
 }
-ESPBTUUID ESPBTUUID::from_raw_reversed(const uint8_t *data) {
-  ESPBTUUID ret;
-  ret.uuid_.len = ESP_UUID_LEN_128;
-  for (int i = 0; i < ESP_UUID_LEN_128; i++)
-    ret.uuid_.uuid.uuid128[ESP_UUID_LEN_128 - 1 - i] = data[i];
-  return ret;
-}
 ESPBTUUID ESPBTUUID::from_raw(const std::string &data) {
   ESPBTUUID ret;
   if (data.length() == 4) {

esphome/components/esp32_ble/ble_uuid.h

@@ -20,7 +20,6 @@ class ESPBTUUID {
   static ESPBTUUID from_uint32(uint32_t uuid);
 
   static ESPBTUUID from_raw(const uint8_t *data);
-  static ESPBTUUID from_raw_reversed(const uint8_t *data);
 
   static ESPBTUUID from_raw(const std::string &data);
 

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -462,16 +462,14 @@ void ESPBTDevice::parse_scan_rst(const esp_ble_gap_cb_param_t::ble_scan_result_e
     ESP_LOGVV(TAG, "  Service UUID: %s", uuid.to_string().c_str());
   }
   for (auto &data : this->manufacturer_datas_) {
-    auto ibeacon = ESPBLEiBeacon::from_manufacturer_data(data);
-    if (ibeacon.has_value()) {
-      ESP_LOGVV(TAG, "  Manufacturer iBeacon:");
-      ESP_LOGVV(TAG, "    UUID: %s", ibeacon.value().get_uuid().to_string().c_str());
-      ESP_LOGVV(TAG, "    Major: %u", ibeacon.value().get_major());
-      ESP_LOGVV(TAG, "    Minor: %u", ibeacon.value().get_minor());
-      ESP_LOGVV(TAG, "    TXPower: %d", ibeacon.value().get_signal_power());
-    } else {
-      ESP_LOGVV(TAG, "  Manufacturer ID: %s, data: %s", data.uuid.to_string().c_str(),
-                format_hex_pretty(data.data).c_str());
+    ESP_LOGVV(TAG, "  Manufacturer data: %s", format_hex_pretty(data.data).c_str());
+    if (this->get_ibeacon().has_value()) {
+      auto ibeacon = this->get_ibeacon().value();
+      ESP_LOGVV(TAG, "    iBeacon data:");
+      ESP_LOGVV(TAG, "      UUID: %s", ibeacon.get_uuid().to_string().c_str());
+      ESP_LOGVV(TAG, "      Major: %u", ibeacon.get_major());
+      ESP_LOGVV(TAG, "      Minor: %u", ibeacon.get_minor());
+      ESP_LOGVV(TAG, "      TXPower: %d", ibeacon.get_signal_power());
     }
   }
   for (auto &data : this->service_datas_) {
@@ -480,7 +478,7 @@ void ESPBTDevice::parse_scan_rst(const esp_ble_gap_cb_param_t::ble_scan_result_e
     ESP_LOGVV(TAG, "    Data: %s", format_hex_pretty(data.data).c_str());
   }
 
-  ESP_LOGVV(TAG, "  Adv data: %s", format_hex_pretty(param.ble_adv, param.adv_data_len + param.scan_rsp_len).c_str());
+  ESP_LOGVV(TAG, "Adv data: %s", format_hex_pretty(param.ble_adv, param.adv_data_len + param.scan_rsp_len).c_str());
 #endif
 }
 void ESPBTDevice::parse_adv_(const esp_ble_gap_cb_param_t::ble_scan_result_evt_param &param) {

esphome/components/esp32_ble_tracker/esp32_ble_tracker.h

@@ -44,10 +44,10 @@ class ESPBLEiBeacon {
   ESPBLEiBeacon(const uint8_t *data);
   static optional<ESPBLEiBeacon> from_manufacturer_data(const ServiceData &data);
 
-  uint16_t get_major() { return byteswap(this->beacon_data_.major); }
-  uint16_t get_minor() { return byteswap(this->beacon_data_.minor); }
+  uint16_t get_major() { return ((this->beacon_data_.major & 0xFF) << 8) | (this->beacon_data_.major >> 8); }
+  uint16_t get_minor() { return ((this->beacon_data_.minor & 0xFF) << 8) | (this->beacon_data_.minor >> 8); }
   int8_t get_signal_power() { return this->beacon_data_.signal_power; }
-  ESPBTUUID get_uuid() { return ESPBTUUID::from_raw_reversed(this->beacon_data_.proximity_uuid); }
+  ESPBTUUID get_uuid() { return ESPBTUUID::from_raw(this->beacon_data_.proximity_uuid); }
 
  protected:
   struct {

esphome/components/esp32_camera/__init__.py

@@ -140,8 +140,6 @@ CONF_TEST_PATTERN = "test_pattern"
 # framerates
 CONF_MAX_FRAMERATE = "max_framerate"
 CONF_IDLE_FRAMERATE = "idle_framerate"
-# frame buffer
-CONF_FRAME_BUFFER_COUNT = "frame_buffer_count"
 
 # stream trigger
 CONF_ON_STREAM_START = "on_stream_start"
@@ -215,7 +213,6 @@ CONFIG_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(
         cv.Optional(CONF_IDLE_FRAMERATE, default="0.1 fps"): cv.All(
             cv.framerate, cv.Range(min=0, max=1)
         ),
-        cv.Optional(CONF_FRAME_BUFFER_COUNT, default=1): cv.int_range(min=1, max=2),
         cv.Optional(CONF_ON_STREAM_START): automation.validate_automation(
             {
                 cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
@@ -288,7 +285,6 @@ async def to_code(config):
         cg.add(var.set_idle_update_interval(0))
     else:
         cg.add(var.set_idle_update_interval(1000 / config[CONF_IDLE_FRAMERATE]))
-    cg.add(var.set_frame_buffer_count(config[CONF_FRAME_BUFFER_COUNT]))
     cg.add(var.set_frame_size(config[CONF_RESOLUTION]))
 
     cg.add_define("USE_ESP32_CAMERA")

esphome/components/esp32_camera/esp32_camera.cpp

@@ -127,7 +127,7 @@ void ESP32Camera::dump_config() {
   sensor_t *s = esp_camera_sensor_get();
   auto st = s->status;
   ESP_LOGCONFIG(TAG, "  JPEG Quality: %u", st.quality);
-  ESP_LOGCONFIG(TAG, "  Framebuffer Count: %u", conf.fb_count);
+  // ESP_LOGCONFIG(TAG, "  Framebuffer Count: %u", conf.fb_count);
   ESP_LOGCONFIG(TAG, "  Contrast: %d", st.contrast);
   ESP_LOGCONFIG(TAG, "  Brightness: %d", st.brightness);
   ESP_LOGCONFIG(TAG, "  Saturation: %d", st.saturation);
@@ -212,8 +212,6 @@ ESP32Camera::ESP32Camera() {
   this->config_.frame_size = FRAMESIZE_VGA;  // 640x480
   this->config_.jpeg_quality = 10;
   this->config_.fb_count = 1;
-  this->config_.grab_mode = CAMERA_GRAB_WHEN_EMPTY;
-  this->config_.fb_location = CAMERA_FB_IN_PSRAM;
 
   global_esp32_camera = this;
 }
@@ -335,12 +333,6 @@ void ESP32Camera::set_max_update_interval(uint32_t max_update_interval) {
 void ESP32Camera::set_idle_update_interval(uint32_t idle_update_interval) {
   this->idle_update_interval_ = idle_update_interval;
 }
-/* set frame buffer parameters */
-void ESP32Camera::set_frame_buffer_mode(camera_grab_mode_t mode) { this->config_.grab_mode = mode; }
-void ESP32Camera::set_frame_buffer_count(uint8_t fb_count) {
-  this->config_.fb_count = fb_count;
-  this->set_frame_buffer_mode(fb_count > 1 ? CAMERA_GRAB_LATEST : CAMERA_GRAB_WHEN_EMPTY);
-}
 
 /* ---------------- public API (specific) ---------------- */
 void ESP32Camera::add_image_callback(std::function<void(std::shared_ptr<CameraImage>)> &&callback) {

esphome/components/esp32_camera/esp32_camera.h

@@ -145,9 +145,6 @@ class ESP32Camera : public Component, public EntityBase {
   /* -- framerates */
   void set_max_update_interval(uint32_t max_update_interval);
   void set_idle_update_interval(uint32_t idle_update_interval);
-  /* -- frame buffer */
-  void set_frame_buffer_mode(camera_grab_mode_t mode);
-  void set_frame_buffer_count(uint8_t fb_count);
 
   /* public API (derivated) */
   void setup() override;

esphome/components/esp32_improv/__init__.py

@@ -1,8 +1,7 @@
-from esphome import automation
 import esphome.codegen as cg
 from esphome.components import binary_sensor, esp32_ble_server, output
 import esphome.config_validation as cv
-from esphome.const import CONF_ID, CONF_ON_STATE, CONF_TRIGGER_ID
+from esphome.const import CONF_ID
 
 AUTO_LOAD = ["esp32_ble_server"]
 CODEOWNERS = ["@jesserockz"]
@@ -12,36 +11,13 @@ CONF_AUTHORIZED_DURATION = "authorized_duration"
 CONF_AUTHORIZER = "authorizer"
 CONF_BLE_SERVER_ID = "ble_server_id"
 CONF_IDENTIFY_DURATION = "identify_duration"
-CONF_ON_PROVISIONED = "on_provisioned"
-CONF_ON_PROVISIONING = "on_provisioning"
-CONF_ON_START = "on_start"
-CONF_ON_STOP = "on_stop"
 CONF_STATUS_INDICATOR = "status_indicator"
 CONF_WIFI_TIMEOUT = "wifi_timeout"
 
-improv_ns = cg.esphome_ns.namespace("improv")
-Error = improv_ns.enum("Error")
-State = improv_ns.enum("State")
-
 esp32_improv_ns = cg.esphome_ns.namespace("esp32_improv")
 ESP32ImprovComponent = esp32_improv_ns.class_(
     "ESP32ImprovComponent", cg.Component, esp32_ble_server.BLEServiceComponent
 )
-ESP32ImprovProvisionedTrigger = esp32_improv_ns.class_(
-    "ESP32ImprovProvisionedTrigger", automation.Trigger.template()
-)
-ESP32ImprovProvisioningTrigger = esp32_improv_ns.class_(
-    "ESP32ImprovProvisioningTrigger", automation.Trigger.template()
-)
-ESP32ImprovStartTrigger = esp32_improv_ns.class_(
-    "ESP32ImprovStartTrigger", automation.Trigger.template()
-)
-ESP32ImprovStateTrigger = esp32_improv_ns.class_(
-    "ESP32ImprovStateTrigger", automation.Trigger.template()
-)
-ESP32ImprovStoppedTrigger = esp32_improv_ns.class_(
-    "ESP32ImprovStoppedTrigger", automation.Trigger.template()
-)
 
 
 CONFIG_SCHEMA = cv.Schema(
@@ -61,37 +37,6 @@ CONFIG_SCHEMA = cv.Schema(
         cv.Optional(
             CONF_WIFI_TIMEOUT, default="1min"
         ): cv.positive_time_period_milliseconds,
-        cv.Optional(CONF_ON_PROVISIONED): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
-                    ESP32ImprovProvisionedTrigger
-                ),
-            }
-        ),
-        cv.Optional(CONF_ON_PROVISIONING): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
-                    ESP32ImprovProvisioningTrigger
-                ),
-            }
-        ),
-        cv.Optional(CONF_ON_START): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ESP32ImprovStartTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_STATE): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(ESP32ImprovStateTrigger),
-            }
-        ),
-        cv.Optional(CONF_ON_STOP): automation.validate_automation(
-            {
-                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(
-                    ESP32ImprovStoppedTrigger
-                ),
-            }
-        ),
     }
 ).extend(cv.COMPONENT_SCHEMA)
 
@@ -118,29 +63,3 @@ async def to_code(config):
     if CONF_STATUS_INDICATOR in config:
         status_indicator = await cg.get_variable(config[CONF_STATUS_INDICATOR])
         cg.add(var.set_status_indicator(status_indicator))
-
-    use_state_callback = False
-    for conf in config.get(CONF_ON_PROVISIONED, []):
-        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [], conf)
-        use_state_callback = True
-    for conf in config.get(CONF_ON_PROVISIONING, []):
-        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [], conf)
-        use_state_callback = True
-    for conf in config.get(CONF_ON_START, []):
-        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [], conf)
-        use_state_callback = True
-    for conf in config.get(CONF_ON_STATE, []):
-        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(
-            trigger, [(State, "state"), (Error, "error")], conf
-        )
-        use_state_callback = True
-    for conf in config.get(CONF_ON_STOP, []):
-        trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)
-        await automation.build_automation(trigger, [], conf)
-        use_state_callback = True
-    if use_state_callback:
-        cg.add_define("USE_ESP32_IMPROV_STATE_CALLBACK")

esphome/components/esp32_improv/automation.h

@@ -1,72 +0,0 @@
-#pragma once
-#ifdef USE_ESP32
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-#include "esp32_improv_component.h"
-
-#include "esphome/core/automation.h"
-
-#include <improv.h>
-
-namespace esphome {
-namespace esp32_improv {
-
-class ESP32ImprovProvisionedTrigger : public Trigger<> {
- public:
-  explicit ESP32ImprovProvisionedTrigger(ESP32ImprovComponent *parent) {
-    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
-      if (state == improv::STATE_PROVISIONED && !parent->is_failed()) {
-        trigger();
-      }
-    });
-  }
-};
-
-class ESP32ImprovProvisioningTrigger : public Trigger<> {
- public:
-  explicit ESP32ImprovProvisioningTrigger(ESP32ImprovComponent *parent) {
-    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
-      if (state == improv::STATE_PROVISIONING && !parent->is_failed()) {
-        trigger();
-      }
-    });
-  }
-};
-
-class ESP32ImprovStartTrigger : public Trigger<> {
- public:
-  explicit ESP32ImprovStartTrigger(ESP32ImprovComponent *parent) {
-    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
-      if ((state == improv::STATE_AUTHORIZED || state == improv::STATE_AWAITING_AUTHORIZATION) &&
-          !parent->is_failed()) {
-        trigger();
-      }
-    });
-  }
-};
-
-class ESP32ImprovStateTrigger : public Trigger<improv::State, improv::Error> {
- public:
-  explicit ESP32ImprovStateTrigger(ESP32ImprovComponent *parent) {
-    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
-      if (!parent->is_failed()) {
-        trigger(state, error);
-      }
-    });
-  }
-};
-
-class ESP32ImprovStoppedTrigger : public Trigger<> {
- public:
-  explicit ESP32ImprovStoppedTrigger(ESP32ImprovComponent *parent) {
-    parent->add_on_state_callback([this, parent](improv::State state, improv::Error error) {
-      if (state == improv::STATE_STOPPED && !parent->is_failed()) {
-        trigger();
-      }
-    });
-  }
-};
-
-}  // namespace esp32_improv
-}  // namespace esphome
-#endif
-#endif

esphome/components/esp32_improv/esp32_improv_component.cpp

@@ -68,12 +68,7 @@ void ESP32ImprovComponent::setup_characteristics() {
 
 void ESP32ImprovComponent::loop() {
   if (!global_ble_server->is_running()) {
-    if (this->state_ != improv::STATE_STOPPED) {
-      this->state_ = improv::STATE_STOPPED;
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-      this->state_callback_.call(this->state_, this->error_state_);
-#endif
-    }
+    this->state_ = improv::STATE_STOPPED;
     this->incoming_data_.clear();
     return;
   }
@@ -222,9 +217,6 @@ void ESP32ImprovComponent::set_state_(improv::State state) {
   service_data[7] = 0x00;  // Reserved
 
   esp32_ble::global_ble->advertising_set_service_data(service_data);
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-  this->state_callback_.call(this->state_, this->error_state_);
-#endif
 }
 
 void ESP32ImprovComponent::set_error_(improv::Error error) {
@@ -278,7 +270,7 @@ void ESP32ImprovComponent::dump_config() {
 void ESP32ImprovComponent::process_incoming_data_() {
   uint8_t length = this->incoming_data_[1];
 
-  ESP_LOGV(TAG, "Processing bytes - %s", format_hex_pretty(this->incoming_data_).c_str());
+  ESP_LOGD(TAG, "Processing bytes - %s", format_hex_pretty(this->incoming_data_).c_str());
   if (this->incoming_data_.size() - 3 == length) {
     this->set_error_(improv::ERROR_NONE);
     improv::ImprovCommand command = improv::parse_improv_data(this->incoming_data_);
@@ -303,7 +295,7 @@ void ESP32ImprovComponent::process_incoming_data_() {
         wifi::global_wifi_component->set_sta(sta);
         wifi::global_wifi_component->start_connecting(sta, false);
         this->set_state_(improv::STATE_PROVISIONING);
-        ESP_LOGD(TAG, "Received Improv Wi-Fi settings ssid=%s, password=" LOG_SECRET("%s"), command.ssid.c_str(),
+        ESP_LOGD(TAG, "Received Improv wifi settings ssid=%s, password=" LOG_SECRET("%s"), command.ssid.c_str(),
                  command.password.c_str());
 
         auto f = std::bind(&ESP32ImprovComponent::on_wifi_connect_timeout_, this);
@@ -321,7 +313,7 @@ void ESP32ImprovComponent::process_incoming_data_() {
         this->incoming_data_.clear();
     }
   } else if (this->incoming_data_.size() - 2 > length) {
-    ESP_LOGV(TAG, "Too much data received or data malformed; resetting buffer...");
+    ESP_LOGV(TAG, "Too much data came in, or malformed resetting buffer...");
     this->incoming_data_.clear();
   } else {
     ESP_LOGV(TAG, "Waiting for split data packets...");
@@ -335,7 +327,7 @@ void ESP32ImprovComponent::on_wifi_connect_timeout_() {
   if (this->authorizer_ != nullptr)
     this->authorized_start_ = millis();
 #endif
-  ESP_LOGW(TAG, "Timed out while connecting to Wi-Fi network");
+  ESP_LOGW(TAG, "Timed out trying to connect to given WiFi network");
   wifi::global_wifi_component->clear_sta();
 }
 

esphome/components/esp32_improv/esp32_improv_component.h

@@ -9,10 +9,6 @@
 #include "esphome/components/esp32_ble_server/ble_server.h"
 #include "esphome/components/wifi/wifi_component.h"
 
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-#include "esphome/core/automation.h"
-#endif
-
 #ifdef USE_BINARY_SENSOR
 #include "esphome/components/binary_sensor/binary_sensor.h"
 #endif
@@ -46,11 +42,6 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
   void stop() override;
   bool is_active() const { return this->state_ != improv::STATE_STOPPED; }
 
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-  void add_on_state_callback(std::function<void(improv::State, improv::Error)> &&callback) {
-    this->state_callback_.add(std::move(callback));
-  }
-#endif
 #ifdef USE_BINARY_SENSOR
   void set_authorizer(binary_sensor::BinarySensor *authorizer) { this->authorizer_ = authorizer; }
 #endif
@@ -63,9 +54,6 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
   void set_wifi_timeout(uint32_t wifi_timeout) { this->wifi_timeout_ = wifi_timeout; }
   uint32_t get_wifi_timeout() const { return this->wifi_timeout_; }
 
-  improv::State get_improv_state() const { return this->state_; }
-  improv::Error get_improv_error_state() const { return this->error_state_; }
-
  protected:
   bool should_start_{false};
   bool setup_complete_{false};
@@ -96,9 +84,6 @@ class ESP32ImprovComponent : public Component, public BLEServiceComponent {
 
   improv::State state_{improv::STATE_STOPPED};
   improv::Error error_state_{improv::ERROR_NONE};
-#ifdef USE_ESP32_IMPROV_STATE_CALLBACK
-  CallbackManager<void(improv::State, improv::Error)> state_callback_{};
-#endif
 
   bool status_indicator_state_{false};
   void set_status_indicator_state_(bool state);

esphome/components/esp_adf/__init__.py

@@ -0,0 +1,103 @@
+import os
+
+import esphome.config_validation as cv
+import esphome.codegen as cg
+import esphome.final_validate as fv
+
+from esphome.components import esp32
+
+from esphome.const import CONF_ID, CONF_BOARD
+
+CODEOWNERS = ["@jesserockz"]
+DEPENDENCIES = ["esp32"]
+
+CONF_ESP_ADF_ID = "esp_adf_id"
+CONF_ESP_ADF = "esp_adf"
+
+esp_adf_ns = cg.esphome_ns.namespace("esp_adf")
+ESPADF = esp_adf_ns.class_("ESPADF", cg.Component)
+ESPADFPipeline = esp_adf_ns.class_("ESPADFPipeline", cg.Parented.template(ESPADF))
+
+SUPPORTED_BOARDS = {
+    "esp32s3box": "CONFIG_ESP32_S3_BOX_BOARD",
+    "esp32s3boxlite": "CONFIG_ESP32_S3_BOX_LITE_BOARD",
+    "esp32s3box3": "CONFIG_ESP32_S3_BOX_3_BOARD",
+    "esp32s3korvo1": "CONFIG_ESP32_S3_KORVO1_BOARD",
+}
+
+
+def _default_board(config):
+    config = config.copy()
+    if board := config.get(CONF_BOARD) is None:
+        board = esp32.get_board()
+        if board in SUPPORTED_BOARDS:
+            config[CONF_BOARD] = board
+    return config
+
+
+def final_validate_usable_board(platform: str):
+    def _validate(adf_config):
+        board = adf_config.get(CONF_BOARD)
+        if board not in SUPPORTED_BOARDS:
+            raise cv.Invalid(f"Board {board} is not supported by esp-adf {platform}")
+        return adf_config
+
+    return cv.Schema(
+        {cv.Required(CONF_ESP_ADF_ID): fv.id_declaration_match_schema(_validate)},
+        extra=cv.ALLOW_EXTRA,
+    )
+
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ESPADF),
+            cv.Optional(CONF_BOARD): cv.string_strict,
+        }
+    ),
+    _default_board,
+    cv.only_with_esp_idf,
+)
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+
+    cg.add_define("USE_ESP_ADF")
+
+    cg.add_platformio_option("build_unflags", "-Wl,--end-group")
+
+    esp32.add_idf_component(
+        name="esp-adf",
+        repo="https://github.com/espressif/esp-adf",
+        path="components",
+        ref="v2.5",
+        components=["*"],
+        submodules=["components/esp-sr", "components/esp-adf-libs"],
+    )
+
+    esp32.add_idf_component(
+        name="esp-dsp",
+        repo="https://github.com/espressif/esp-dsp",
+        ref="v1.2.0",
+    )
+
+    cg.add_platformio_option(
+        "board_build.embed_txtfiles", "components/dueros_service/duer_profile"
+    )
+
+    if board := config.get(CONF_BOARD):
+        cg.add_define("USE_ESP_ADF_BOARD")
+
+        esp32.add_idf_sdkconfig_option(SUPPORTED_BOARDS[board], True)
+
+        esp32.add_extra_script(
+            "pre",
+            "apply_adf_patches.py",
+            os.path.join(os.path.dirname(__file__), "apply_adf_patches.py.script"),
+        )
+        esp32.add_extra_build_file(
+            "esp_adf_patches/idf_v4.4_freertos.patch",
+            "https://github.com/espressif/esp-adf/raw/v2.5/idf_patches/idf_v4.4_freertos.patch",
+        )

esphome/components/esp_adf/apply_adf_patches.py.script

@@ -0,0 +1,23 @@
+from os.path import join, isfile
+
+Import("env")
+
+FRAMEWORK_DIR = env.PioPlatform().get_package_dir("framework-espidf")
+patchflag_path = join(FRAMEWORK_DIR, ".adf-patching-done")
+
+PROJECT_DIR = env.get('PROJECT_DIR')
+
+PATCH_FILE = join(PROJECT_DIR, "esp_adf_patches", "idf_v4.4_freertos.patch")
+
+# patch file only if we didn't do it before
+if not isfile(patchflag_path):
+    print(PATCH_FILE)
+    assert isfile(PATCH_FILE)
+
+    env.Execute("patch -p1 -d %s -i %s" % (FRAMEWORK_DIR, PATCH_FILE))
+
+    def _touch(path):
+        with open(path, "w") as fp:
+            fp.write("")
+
+    env.Execute(lambda *args, **kwargs: _touch(patchflag_path))

esphome/components/esp_adf/esp_adf.cpp

@@ -0,0 +1,30 @@
+#include "esp_adf.h"
+#include "esphome/core/defines.h"
+
+#ifdef USE_ESP_IDF
+
+#ifdef USE_ESP_ADF_BOARD
+#include <board.h>
+#endif
+
+#include "esphome/core/log.h"
+
+namespace esphome {
+namespace esp_adf {
+
+static const char *const TAG = "esp_adf";
+
+void ESPADF::setup() {
+#ifdef USE_ESP_ADF_BOARD
+  ESP_LOGI(TAG, "Start codec chip");
+  audio_board_handle_t board_handle = audio_board_init();
+  audio_hal_ctrl_codec(board_handle->audio_hal, AUDIO_HAL_CODEC_MODE_BOTH, AUDIO_HAL_CTRL_START);
+#endif
+}
+
+float ESPADF::get_setup_priority() const { return setup_priority::HARDWARE; }
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/esp_adf/esp_adf.h

@@ -0,0 +1,58 @@
+#pragma once
+
+#ifdef USE_ESP_IDF
+
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+namespace esphome {
+namespace esp_adf {
+
+static const size_t BUFFER_SIZE = 1024;
+
+enum class TaskEventType : uint8_t {
+  STARTING = 0,
+  STARTED,
+  RUNNING,
+  STOPPING,
+  STOPPED,
+  WARNING = 255,
+};
+
+struct TaskEvent {
+  TaskEventType type;
+  esp_err_t err;
+};
+
+struct CommandEvent {
+  bool stop;
+};
+
+struct DataEvent {
+  bool stop;
+  size_t len;
+  uint8_t data[BUFFER_SIZE];
+};
+
+class ESPADF;
+
+class ESPADFPipeline : public Parented<ESPADF> {};
+
+class ESPADF : public Component {
+ public:
+  void setup() override;
+
+  float get_setup_priority() const override;
+
+  void lock() { this->lock_.lock(); }
+  bool try_lock() { return this->lock_.try_lock(); }
+  void unlock() { this->lock_.unlock(); }
+
+ protected:
+  Mutex lock_;
+};
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/esp_adf/microphone/__init__.py

@@ -0,0 +1,42 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import microphone
+from esphome.const import CONF_ID
+
+from .. import (
+    CONF_ESP_ADF_ID,
+    ESPADF,
+    ESPADFPipeline,
+    esp_adf_ns,
+    final_validate_usable_board,
+)
+
+AUTO_LOAD = ["esp_adf"]
+CONFLICTS_WITH = ["i2s_audio"]
+DEPENDENCIES = ["esp32"]
+
+ESPADFMicrophone = esp_adf_ns.class_(
+    "ESPADFMicrophone", ESPADFPipeline, microphone.Microphone, cg.Component
+)
+
+
+CONFIG_SCHEMA = cv.All(
+    microphone.MICROPHONE_SCHEMA.extend(
+        {
+            cv.GenerateID(): cv.declare_id(ESPADFMicrophone),
+            cv.GenerateID(CONF_ESP_ADF_ID): cv.use_id(ESPADF),
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    cv.only_with_esp_idf,
+    cv.require_esphome_version(2023, 12, 7),
+)
+
+FINAL_VALIDATE_SCHEMA = final_validate_usable_board("microphone")
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ESP_ADF_ID])
+
+    await microphone.register_microphone(var, config)

esphome/components/esp_adf/microphone/esp_adf_microphone.cpp

@@ -0,0 +1,315 @@
+#include "esp_adf_microphone.h"
+
+#ifdef USE_ESP_IDF
+
+#include <driver/i2s.h>
+
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <algorithm_stream.h>
+#include <audio_element.h>
+#include <audio_hal.h>
+#include <audio_pipeline.h>
+#include <filter_resample.h>
+#include <i2s_stream.h>
+#include <raw_stream.h>
+#include <recorder_sr.h>
+
+#include <board.h>
+
+namespace esphome {
+namespace esp_adf {
+
+static const char *const TAG = "esp_adf.microphone";
+
+void ESPADFMicrophone::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up ESP ADF Microphone...");
+  this->ring_buffer_ = RingBuffer::create(8000 * sizeof(int16_t));
+  if (this->ring_buffer_ == nullptr) {
+    ESP_LOGE(TAG, "Could not allocate ring buffer");
+    this->mark_failed();
+    return;
+  }
+
+  this->read_event_queue_ = xQueueCreate(20, sizeof(TaskEvent));
+  if (this->read_event_queue_ == nullptr) {
+    ESP_LOGW(TAG, "Could not allocate event queue");
+    this->mark_failed();
+    return;
+  }
+  this->read_command_queue_ = xQueueCreate(20, sizeof(CommandEvent));
+  if (this->read_command_queue_ == nullptr) {
+    ESP_LOGW(TAG, "Could not allocate command queue");
+    this->mark_failed();
+    return;
+  }
+  ESP_LOGCONFIG(TAG, "Successfully set up ESP ADF Microphone");
+}
+
+void ESPADFMicrophone::start() {
+  if (this->is_failed())
+    return;
+  if (this->state_ == microphone::STATE_STOPPING) {
+    ESP_LOGW(TAG, "Microphone is stopping, cannot start.");
+    return;
+  }
+  this->state_ = microphone::STATE_STARTING;
+}
+void ESPADFMicrophone::start_() {
+  if (!this->parent_->try_lock()) {
+    return;
+  }
+
+  xTaskCreate(ESPADFMicrophone::read_task, "read_task", 8192, (void *) this, 0, &this->read_task_handle_);
+}
+
+void ESPADFMicrophone::read_task(void *params) {
+  ESPADFMicrophone *this_mic = (ESPADFMicrophone *) params;
+  TaskEvent event;
+
+  ExternalRAMAllocator<int16_t> allocator(ExternalRAMAllocator<int16_t>::ALLOW_FAILURE);
+  int16_t *buffer = allocator.allocate(BUFFER_SIZE / sizeof(int16_t));
+  if (buffer == nullptr) {
+    event.type = TaskEventType::WARNING;
+    event.err = ESP_ERR_NO_MEM;
+    xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+    event.type = TaskEventType::STOPPED;
+    event.err = ESP_OK;
+    xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+    while (true) {
+      delay(10);
+    }
+    return;
+  }
+
+  event.type = TaskEventType::STARTING;
+  xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+  audio_pipeline_cfg_t pipeline_cfg = {
+      .rb_size = 8 * 1024,
+  };
+  audio_pipeline_handle_t pipeline = audio_pipeline_init(&pipeline_cfg);
+
+  i2s_driver_config_t i2s_config = {
+      .mode = (i2s_mode_t) (I2S_MODE_MASTER | I2S_MODE_RX),
+      .sample_rate = 16000,
+      .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
+      .channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
+      .communication_format = I2S_COMM_FORMAT_STAND_I2S,
+      .intr_alloc_flags = ESP_INTR_FLAG_LEVEL2 | ESP_INTR_FLAG_IRAM,
+      .dma_buf_count = 8,
+      .dma_buf_len = 128,
+      .use_apll = false,
+      .tx_desc_auto_clear = true,
+      .fixed_mclk = 0,
+      .mclk_multiple = I2S_MCLK_MULTIPLE_256,
+      .bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT,
+  };
+
+  i2s_stream_cfg_t i2s_cfg = {
+      .type = AUDIO_STREAM_READER,
+      .i2s_config = i2s_config,
+      .i2s_port = static_cast<i2s_port_t>(CODEC_ADC_I2S_PORT),
+      .use_alc = false,
+      .volume = 0,
+      .out_rb_size = I2S_STREAM_RINGBUFFER_SIZE,
+      .task_stack = I2S_STREAM_TASK_STACK,
+      .task_core = I2S_STREAM_TASK_CORE,
+      .task_prio = I2S_STREAM_TASK_PRIO,
+      .stack_in_ext = false,
+      .multi_out_num = 0,
+      .uninstall_drv = true,
+      .need_expand = false,
+      .expand_src_bits = I2S_BITS_PER_SAMPLE_16BIT,
+  };
+  audio_element_handle_t i2s_stream_reader = i2s_stream_init(&i2s_cfg);
+
+  rsp_filter_cfg_t rsp_cfg = {
+      .src_rate = 16000,
+      .src_ch = 2,
+      .dest_rate = 16000,
+      .dest_bits = 16,
+      .dest_ch = 1,
+      .src_bits = I2S_BITS_PER_SAMPLE_16BIT,
+      .mode = RESAMPLE_DECODE_MODE,
+      .max_indata_bytes = RSP_FILTER_BUFFER_BYTE,
+      .out_len_bytes = RSP_FILTER_BUFFER_BYTE,
+      .type = ESP_RESAMPLE_TYPE_AUTO,
+      .complexity = 2,
+      .down_ch_idx = 0,
+      .prefer_flag = ESP_RSP_PREFER_TYPE_SPEED,
+      .out_rb_size = RSP_FILTER_RINGBUFFER_SIZE,
+      .task_stack = RSP_FILTER_TASK_STACK,
+      .task_core = RSP_FILTER_TASK_CORE,
+      .task_prio = RSP_FILTER_TASK_PRIO,
+      .stack_in_ext = true,
+  };
+  audio_element_handle_t filter = rsp_filter_init(&rsp_cfg);
+
+  raw_stream_cfg_t raw_cfg = {
+      .type = AUDIO_STREAM_READER,
+      .out_rb_size = 8 * 1024,
+  };
+  audio_element_handle_t raw_read = raw_stream_init(&raw_cfg);
+
+  audio_pipeline_register(pipeline, i2s_stream_reader, "i2s");
+  audio_pipeline_register(pipeline, filter, "filter");
+  audio_pipeline_register(pipeline, raw_read, "raw");
+
+  const char *link_tag[3] = {"i2s", "filter", "raw"};
+  audio_pipeline_link(pipeline, &link_tag[0], 3);
+
+  audio_pipeline_run(pipeline);
+
+  event.type = TaskEventType::STARTED;
+  xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+  CommandEvent command_event;
+
+  while (true) {
+    if (xQueueReceive(this_mic->read_command_queue_, &command_event, 0) == pdTRUE) {
+      if (command_event.stop) {
+        // Stop signal from main thread
+        break;
+      }
+    }
+
+    int bytes_read = raw_stream_read(raw_read, (char *) buffer, BUFFER_SIZE);
+
+    if (bytes_read == -2 || bytes_read == 0) {
+      // No data in buffers to read.
+      continue;
+    } else if (bytes_read < 0) {
+      event.type = TaskEventType::WARNING;
+      event.err = bytes_read;
+      xQueueSend(this_mic->read_event_queue_, &event, 0);
+      continue;
+    }
+
+    size_t written = this_mic->ring_buffer_->write((void *) buffer, bytes_read);
+
+    event.type = TaskEventType::RUNNING;
+    event.err = written;
+    xQueueSend(this_mic->read_event_queue_, &event, 0);
+  }
+
+  allocator.deallocate(buffer, BUFFER_SIZE / sizeof(int16_t));
+
+  audio_pipeline_stop(pipeline);
+  audio_pipeline_wait_for_stop(pipeline);
+  audio_pipeline_terminate(pipeline);
+
+  event.type = TaskEventType::STOPPING;
+  xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+  audio_pipeline_unregister(pipeline, i2s_stream_reader);
+  audio_pipeline_unregister(pipeline, filter);
+  // audio_pipeline_unregister(pipeline, algo_stream);
+  audio_pipeline_unregister(pipeline, raw_read);
+
+  audio_pipeline_deinit(pipeline);
+  audio_element_deinit(i2s_stream_reader);
+  audio_element_deinit(filter);
+  // audio_element_deinit(algo_stream);
+  audio_element_deinit(raw_read);
+
+  event.type = TaskEventType::STOPPED;
+  xQueueSend(this_mic->read_event_queue_, &event, portMAX_DELAY);
+
+  while (true) {
+    delay(10);
+  }
+}
+
+void ESPADFMicrophone::stop() {
+  if (this->state_ == microphone::STATE_STOPPED || this->state_ == microphone::STATE_STOPPING || this->is_failed())
+    return;
+  this->state_ = microphone::STATE_STOPPING;
+  CommandEvent command_event;
+  command_event.stop = true;
+  xQueueSendToFront(this->read_command_queue_, &command_event, portMAX_DELAY);
+  ESP_LOGD(TAG, "Stopping microphone");
+}
+
+size_t ESPADFMicrophone::read(int16_t *buf, size_t len) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Microphone is failed, cannot read");
+    return 0;
+  }
+  if (this->ring_buffer_->available() == 0) {
+    return 0;  // No data
+  }
+  size_t bytes_read = this->ring_buffer_->read((void *) buf, len);
+
+  if (bytes_read == 0) {
+    // No data in buffers to read.
+    this->status_set_warning();
+    return 0;
+  }
+  this->status_clear_warning();
+
+  return bytes_read;
+}
+
+void ESPADFMicrophone::read_() {
+  std::vector<int16_t> samples;
+  samples.resize(BUFFER_SIZE);
+  this->read(samples.data(), samples.size());
+
+  this->data_callbacks_.call(samples);
+}
+
+void ESPADFMicrophone::watch_() {
+  TaskEvent event;
+  if (xQueueReceive(this->read_event_queue_, &event, 0) == pdTRUE) {
+    switch (event.type) {
+      case TaskEventType::STARTING:
+      case TaskEventType::STOPPING:
+        break;
+      case TaskEventType::STARTED:
+        ESP_LOGD(TAG, "Microphone started");
+        this->state_ = microphone::STATE_RUNNING;
+        break;
+      case TaskEventType::RUNNING:
+        this->status_clear_warning();
+        // ESP_LOGD(TAG, "Putting %d bytes into ring buffer", event.err);
+        break;
+      case TaskEventType::STOPPED:
+        this->parent_->unlock();
+        this->state_ = microphone::STATE_STOPPED;
+        vTaskDelete(this->read_task_handle_);
+        this->read_task_handle_ = nullptr;
+        ESP_LOGD(TAG, "Microphone stopped");
+        break;
+      case TaskEventType::WARNING:
+        ESP_LOGW(TAG, "Error writing to pipeline: %s", esp_err_to_name(event.err));
+        this->status_set_warning();
+        break;
+    }
+  }
+}
+
+void ESPADFMicrophone::loop() {
+  this->watch_();
+  switch (this->state_) {
+    case microphone::STATE_STOPPED:
+    case microphone::STATE_STOPPING:
+      break;
+    case microphone::STATE_STARTING:
+      this->start_();
+      break;
+    case microphone::STATE_RUNNING:
+      if (this->data_callbacks_.size() > 0) {
+        this->read_();
+      }
+      break;
+  }
+}
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/esp_adf/microphone/esp_adf_microphone.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#ifdef USE_ESP_IDF
+
+#include "../esp_adf.h"
+
+#include "esphome/core/component.h"
+#include "esphome/core/ring_buffer.h"
+
+#include "esphome/components/microphone/microphone.h"
+
+namespace esphome {
+namespace esp_adf {
+
+class ESPADFMicrophone : public ESPADFPipeline, public microphone::Microphone, public Component {
+ public:
+  void setup() override;
+  void start() override;
+  void stop() override;
+
+  void loop() override;
+
+  size_t read(int16_t *buf, size_t len) override;
+
+ protected:
+  void start_();
+  void read_();
+  void watch_();
+
+  static void read_task(void *params);
+
+  std::unique_ptr<RingBuffer> ring_buffer_;
+
+  TaskHandle_t read_task_handle_{nullptr};
+  QueueHandle_t read_event_queue_;
+  QueueHandle_t read_command_queue_;
+};
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/esp_adf/speaker/__init__.py

@@ -0,0 +1,41 @@
+import esphome.codegen as cg
+import esphome.config_validation as cv
+from esphome.components import speaker
+from esphome.const import CONF_ID
+
+from .. import (
+    CONF_ESP_ADF_ID,
+    ESPADF,
+    ESPADFPipeline,
+    esp_adf_ns,
+    final_validate_usable_board,
+)
+
+AUTO_LOAD = ["esp_adf"]
+CONFLICTS_WITH = ["i2s_audio"]
+DEPENDENCIES = ["esp32"]
+
+ESPADFSpeaker = esp_adf_ns.class_(
+    "ESPADFSpeaker", ESPADFPipeline, speaker.Speaker, cg.Component
+)
+
+
+CONFIG_SCHEMA = cv.All(
+    cv.Schema(
+        {
+            cv.GenerateID(): cv.declare_id(ESPADFSpeaker),
+            cv.GenerateID(CONF_ESP_ADF_ID): cv.use_id(ESPADF),
+        }
+    ).extend(cv.COMPONENT_SCHEMA),
+    cv.only_with_esp_idf,
+)
+
+FINAL_VALIDATE_SCHEMA = final_validate_usable_board("speaker")
+
+
+async def to_code(config):
+    var = cg.new_Pvariable(config[CONF_ID])
+    await cg.register_component(var, config)
+    await cg.register_parented(var, config[CONF_ESP_ADF_ID])
+
+    await speaker.register_speaker(var, config)

esphome/components/esp_adf/speaker/esp_adf_speaker.cpp

@@ -0,0 +1,295 @@
+#include "esp_adf_speaker.h"
+
+#ifdef USE_ESP_IDF
+
+#include <driver/i2s.h>
+
+#include "esphome/core/application.h"
+#include "esphome/core/hal.h"
+#include "esphome/core/log.h"
+
+#include <audio_hal.h>
+#include <filter_resample.h>
+#include <i2s_stream.h>
+#include <raw_stream.h>
+
+namespace esphome {
+namespace esp_adf {
+
+static const size_t BUFFER_COUNT = 50;
+
+static const char *const TAG = "esp_adf.speaker";
+
+void ESPADFSpeaker::setup() {
+  ESP_LOGCONFIG(TAG, "Setting up ESP ADF Speaker...");
+
+  ExternalRAMAllocator<uint8_t> allocator(ExternalRAMAllocator<uint8_t>::ALLOW_FAILURE);
+
+  this->buffer_queue_.storage = allocator.allocate(sizeof(StaticQueue_t) + (BUFFER_COUNT * sizeof(DataEvent)));
+  if (this->buffer_queue_.storage == nullptr) {
+    ESP_LOGE(TAG, "Failed to allocate buffer queue!");
+    this->mark_failed();
+    return;
+  }
+
+  this->buffer_queue_.handle =
+      xQueueCreateStatic(BUFFER_COUNT, sizeof(DataEvent), this->buffer_queue_.storage + sizeof(StaticQueue_t),
+                         (StaticQueue_t *) (this->buffer_queue_.storage));
+
+  this->event_queue_ = xQueueCreate(20, sizeof(TaskEvent));
+  if (this->event_queue_ == nullptr) {
+    ESP_LOGW(TAG, "Could not allocate event queue.");
+    this->mark_failed();
+    return;
+  }
+}
+
+void ESPADFSpeaker::start() { this->state_ = speaker::STATE_STARTING; }
+void ESPADFSpeaker::start_() {
+  if (!this->parent_->try_lock()) {
+    return;  // Waiting for another i2s component to return lock
+  }
+
+  xTaskCreate(ESPADFSpeaker::player_task, "speaker_task", 8192, (void *) this, 0, &this->player_task_handle_);
+}
+
+void ESPADFSpeaker::player_task(void *params) {
+  ESPADFSpeaker *this_speaker = (ESPADFSpeaker *) params;
+
+  TaskEvent event;
+  event.type = TaskEventType::STARTING;
+  xQueueSend(this_speaker->event_queue_, &event, portMAX_DELAY);
+
+  i2s_driver_config_t i2s_config = {
+      .mode = (i2s_mode_t) (I2S_MODE_MASTER | I2S_MODE_TX),
+      .sample_rate = 16000,
+      .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
+      .channel_format = I2S_CHANNEL_FMT_ONLY_LEFT,
+      .communication_format = I2S_COMM_FORMAT_STAND_I2S,
+      .intr_alloc_flags = ESP_INTR_FLAG_LEVEL2 | ESP_INTR_FLAG_IRAM,
+      .dma_buf_count = 8,
+      .dma_buf_len = 1024,
+      .use_apll = false,
+      .tx_desc_auto_clear = true,
+      .fixed_mclk = 0,
+      .mclk_multiple = I2S_MCLK_MULTIPLE_256,
+      .bits_per_chan = I2S_BITS_PER_CHAN_DEFAULT,
+  };
+
+  audio_pipeline_cfg_t pipeline_cfg = {
+      .rb_size = 8 * 1024,
+  };
+  audio_pipeline_handle_t pipeline = audio_pipeline_init(&pipeline_cfg);
+
+  i2s_stream_cfg_t i2s_cfg = {
+      .type = AUDIO_STREAM_WRITER,
+      .i2s_config = i2s_config,
+      .i2s_port = I2S_NUM_0,
+      .use_alc = false,
+      .volume = 0,
+      .out_rb_size = I2S_STREAM_RINGBUFFER_SIZE,
+      .task_stack = I2S_STREAM_TASK_STACK,
+      .task_core = I2S_STREAM_TASK_CORE,
+      .task_prio = I2S_STREAM_TASK_PRIO,
+      .stack_in_ext = false,
+      .multi_out_num = 0,
+      .uninstall_drv = true,
+      .need_expand = false,
+      .expand_src_bits = I2S_BITS_PER_SAMPLE_16BIT,
+  };
+  audio_element_handle_t i2s_stream_writer = i2s_stream_init(&i2s_cfg);
+
+  rsp_filter_cfg_t rsp_cfg = {
+      .src_rate = 16000,
+      .src_ch = 1,
+      .dest_rate = 16000,
+      .dest_bits = 16,
+      .dest_ch = 2,
+      .src_bits = 16,
+      .mode = RESAMPLE_DECODE_MODE,
+      .max_indata_bytes = RSP_FILTER_BUFFER_BYTE,
+      .out_len_bytes = RSP_FILTER_BUFFER_BYTE,
+      .type = ESP_RESAMPLE_TYPE_AUTO,
+      .complexity = 2,
+      .down_ch_idx = 0,
+      .prefer_flag = ESP_RSP_PREFER_TYPE_SPEED,
+      .out_rb_size = RSP_FILTER_RINGBUFFER_SIZE,
+      .task_stack = RSP_FILTER_TASK_STACK,
+      .task_core = RSP_FILTER_TASK_CORE,
+      .task_prio = RSP_FILTER_TASK_PRIO,
+      .stack_in_ext = true,
+  };
+  audio_element_handle_t filter = rsp_filter_init(&rsp_cfg);
+
+  raw_stream_cfg_t raw_cfg = {
+      .type = AUDIO_STREAM_WRITER,
+      .out_rb_size = 8 * 1024,
+  };
+  audio_element_handle_t raw_write = raw_stream_init(&raw_cfg);
+
+  audio_pipeline_register(pipeline, raw_write, "raw");
+  audio_pipeline_register(pipeline, filter, "filter");
+  audio_pipeline_register(pipeline, i2s_stream_writer, "i2s");
+
+  const char *link_tag[3] = {
+      "raw",
+      // "filter",
+      "i2s",
+  };
+  audio_pipeline_link(pipeline, &link_tag[0], 2);
+
+  audio_pipeline_run(pipeline);
+
+  DataEvent data_event;
+
+  event.type = TaskEventType::STARTED;
+  xQueueSend(this_speaker->event_queue_, &event, 0);
+
+  uint32_t last_received = millis();
+
+  while (true) {
+    if (xQueueReceive(this_speaker->buffer_queue_.handle, &data_event, 0) != pdTRUE) {
+      if (millis() - last_received > 500) {
+        // No audio for 500ms, stop
+        break;
+      } else {
+        continue;
+      }
+    }
+    if (data_event.stop) {
+      // Stop signal from main thread
+      while (xQueueReceive(this_speaker->buffer_queue_.handle, &data_event, 0) == pdTRUE) {
+        // Flush queue
+      }
+      break;
+    }
+
+    size_t remaining = data_event.len;
+    size_t current = 0;
+    if (remaining > 0)
+      last_received = millis();
+
+    while (remaining > 0) {
+      int bytes_written = raw_stream_write(raw_write, (char *) data_event.data + current, remaining);
+      if (bytes_written == ESP_FAIL) {
+        event = {.type = TaskEventType::WARNING, .err = ESP_FAIL};
+        xQueueSend(this_speaker->event_queue_, &event, 0);
+        continue;
+      }
+
+      remaining -= bytes_written;
+      current += bytes_written;
+    }
+
+    event.type = TaskEventType::RUNNING;
+    xQueueSend(this_speaker->event_queue_, &event, 0);
+  }
+
+  audio_pipeline_stop(pipeline);
+  audio_pipeline_wait_for_stop(pipeline);
+  audio_pipeline_terminate(pipeline);
+
+  event.type = TaskEventType::STOPPING;
+  xQueueSend(this_speaker->event_queue_, &event, portMAX_DELAY);
+
+  audio_pipeline_unregister(pipeline, i2s_stream_writer);
+  audio_pipeline_unregister(pipeline, filter);
+  audio_pipeline_unregister(pipeline, raw_write);
+
+  audio_pipeline_deinit(pipeline);
+  audio_element_deinit(i2s_stream_writer);
+  audio_element_deinit(filter);
+  audio_element_deinit(raw_write);
+
+  event.type = TaskEventType::STOPPED;
+  xQueueSend(this_speaker->event_queue_, &event, portMAX_DELAY);
+
+  while (true) {
+    delay(10);
+  }
+}
+
+void ESPADFSpeaker::stop() {
+  if (this->state_ == speaker::STATE_STOPPED)
+    return;
+  if (this->state_ == speaker::STATE_STARTING) {
+    this->state_ = speaker::STATE_STOPPED;
+    return;
+  }
+  this->state_ = speaker::STATE_STOPPING;
+  DataEvent data;
+  data.stop = true;
+  xQueueSendToFront(this->buffer_queue_.handle, &data, portMAX_DELAY);
+}
+
+void ESPADFSpeaker::watch_() {
+  TaskEvent event;
+  if (xQueueReceive(this->event_queue_, &event, 0) == pdTRUE) {
+    switch (event.type) {
+      case TaskEventType::STARTING:
+      case TaskEventType::STOPPING:
+        break;
+      case TaskEventType::STARTED:
+        this->state_ = speaker::STATE_RUNNING;
+        break;
+      case TaskEventType::RUNNING:
+        this->status_clear_warning();
+        break;
+      case TaskEventType::STOPPED:
+        this->parent_->unlock();
+        this->state_ = speaker::STATE_STOPPED;
+        vTaskDelete(this->player_task_handle_);
+        this->player_task_handle_ = nullptr;
+        break;
+      case TaskEventType::WARNING:
+        ESP_LOGW(TAG, "Error writing to pipeline: %s", esp_err_to_name(event.err));
+        this->status_set_warning();
+        break;
+    }
+  }
+}
+
+void ESPADFSpeaker::loop() {
+  this->watch_();
+  switch (this->state_) {
+    case speaker::STATE_STARTING:
+      this->start_();
+      break;
+    case speaker::STATE_RUNNING:
+    case speaker::STATE_STOPPING:
+    case speaker::STATE_STOPPED:
+      break;
+  }
+}
+
+size_t ESPADFSpeaker::play(const uint8_t *data, size_t length) {
+  if (this->is_failed()) {
+    ESP_LOGE(TAG, "Failed to play audio, speaker is in failed state.");
+    return 0;
+  }
+  if (this->state_ != speaker::STATE_RUNNING && this->state_ != speaker::STATE_STARTING) {
+    this->start();
+  }
+  size_t remaining = length;
+  size_t index = 0;
+  while (remaining > 0) {
+    DataEvent event;
+    event.stop = false;
+    size_t to_send_length = std::min(remaining, BUFFER_SIZE);
+    event.len = to_send_length;
+    memcpy(event.data, data + index, to_send_length);
+    if (xQueueSend(this->buffer_queue_.handle, &event, 0) != pdTRUE) {
+      return index;  // Queue full
+    }
+    remaining -= to_send_length;
+    index += to_send_length;
+  }
+  return index;
+}
+
+bool ESPADFSpeaker::has_buffered_data() const { return uxQueueMessagesWaiting(this->buffer_queue_.handle) > 0; }
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/esp_adf/speaker/esp_adf_speaker.h

@@ -0,0 +1,51 @@
+#pragma once
+
+#ifdef USE_ESP_IDF
+
+#include "../esp_adf.h"
+
+#include <freertos/FreeRTOS.h>
+#include <freertos/queue.h>
+
+#include "esphome/components/speaker/speaker.h"
+#include "esphome/core/component.h"
+#include "esphome/core/helpers.h"
+
+#include <audio_element.h>
+#include <audio_pipeline.h>
+
+namespace esphome {
+namespace esp_adf {
+
+class ESPADFSpeaker : public ESPADFPipeline, public speaker::Speaker, public Component {
+ public:
+  float get_setup_priority() const override { return esphome::setup_priority::LATE; }
+
+  void setup() override;
+  void loop() override;
+
+  void start() override;
+  void stop() override;
+
+  size_t play(const uint8_t *data, size_t length) override;
+
+  bool has_buffered_data() const override;
+
+ protected:
+  void start_();
+  void watch_();
+
+  static void player_task(void *params);
+
+  TaskHandle_t player_task_handle_{nullptr};
+  struct {
+    QueueHandle_t handle;
+    uint8_t *storage;
+  } buffer_queue_;
+  QueueHandle_t event_queue_;
+};
+
+}  // namespace esp_adf
+}  // namespace esphome
+
+#endif  // USE_ESP_IDF

esphome/components/ethernet/__init__.py

@@ -59,7 +59,6 @@ ETHERNET_TYPES = {
     "KSZ8081": EthernetType.ETHERNET_TYPE_KSZ8081,
     "KSZ8081RNA": EthernetType.ETHERNET_TYPE_KSZ8081RNA,
     "W5500": EthernetType.ETHERNET_TYPE_W5500,
-    "OPENETH": EthernetType.ETHERNET_TYPE_OPENETH,
 }
 
 SPI_ETHERNET_TYPES = ["W5500"]
@@ -172,7 +171,6 @@ CONFIG_SCHEMA = cv.All(
             "KSZ8081": RMII_SCHEMA,
             "KSZ8081RNA": RMII_SCHEMA,
             "W5500": SPI_SCHEMA,
-            "OPENETH": BASE_SCHEMA,
         },
         upper=True,
     ),
@@ -242,9 +240,6 @@ async def to_code(config):
         if CORE.using_esp_idf:
             add_idf_sdkconfig_option("CONFIG_ETH_USE_SPI_ETHERNET", True)
             add_idf_sdkconfig_option("CONFIG_ETH_SPI_ETHERNET_W5500", True)
-    elif config[CONF_TYPE] == "OPENETH":
-        cg.add_define("USE_ETHERNET_OPENETH")
-        add_idf_sdkconfig_option("CONFIG_ETH_USE_OPENETH", True)
     else:
         cg.add(var.set_phy_addr(config[CONF_PHY_ADDR]))
         cg.add(var.set_mdc_pin(config[CONF_MDC_PIN]))

esphome/components/ethernet/ethernet_component.cpp

@@ -120,8 +120,6 @@ void EthernetComponent::setup() {
   phy_config.reset_gpio_num = this->reset_pin_;
 
   esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
-#elif defined(USE_ETHERNET_OPENETH)
-  esp_eth_mac_t *mac = esp_eth_mac_new_openeth(&mac_config);
 #else
   phy_config.phy_addr = this->phy_addr_;
   phy_config.reset_gpio_num = this->power_pin_;
@@ -145,13 +143,6 @@ void EthernetComponent::setup() {
 #endif
 
   switch (this->type_) {
-#ifdef USE_ETHERNET_OPENETH
-    case ETHERNET_TYPE_OPENETH: {
-      phy_config.autonego_timeout_ms = 1000;
-      this->phy_ = esp_eth_phy_new_dp83848(&phy_config);
-      break;
-    }
-#endif
 #if CONFIG_ETH_USE_ESP32_EMAC
     case ETHERNET_TYPE_LAN8720: {
       this->phy_ = esp_eth_phy_new_lan87xx(&phy_config);
@@ -311,10 +302,6 @@ void EthernetComponent::dump_config() {
       eth_type = "W5500";
       break;
 
-    case ETHERNET_TYPE_OPENETH:
-      eth_type = "OPENETH";
-      break;
-
     default:
       eth_type = "Unknown";
       break;

esphome/components/ethernet/ethernet_component.h

@@ -25,7 +25,6 @@ enum EthernetType {
   ETHERNET_TYPE_KSZ8081,
   ETHERNET_TYPE_KSZ8081RNA,
   ETHERNET_TYPE_W5500,
-  ETHERNET_TYPE_OPENETH,
 };
 
 struct ManualIP {

esphome/components/event/__init__.py

@@ -1,6 +1,6 @@
 from esphome import automation
 import esphome.codegen as cg
-from esphome.components import mqtt, web_server
+from esphome.components import mqtt
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_DEVICE_CLASS,
@@ -11,7 +11,6 @@ from esphome.const import (
     CONF_MQTT_ID,
     CONF_ON_EVENT,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
     DEVICE_CLASS_BUTTON,
     DEVICE_CLASS_DOORBELL,
     DEVICE_CLASS_EMPTY,
@@ -41,21 +40,17 @@ EventTrigger = event_ns.class_("EventTrigger", automation.Trigger.template())
 
 validate_device_class = cv.one_of(*DEVICE_CLASSES, lower=True, space="_")
 
-EVENT_SCHEMA = (
-    cv.ENTITY_BASE_SCHEMA.extend(web_server.WEBSERVER_SORTING_SCHEMA)
-    .extend(cv.MQTT_COMPONENT_SCHEMA)
-    .extend(
-        {
-            cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent),
-            cv.GenerateID(): cv.declare_id(Event),
-            cv.Optional(CONF_DEVICE_CLASS): validate_device_class,
-            cv.Optional(CONF_ON_EVENT): automation.validate_automation(
-                {
-                    cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger),
-                }
-            ),
-        }
-    )
+EVENT_SCHEMA = cv.ENTITY_BASE_SCHEMA.extend(cv.MQTT_COMPONENT_SCHEMA).extend(
+    {
+        cv.OnlyWith(CONF_MQTT_ID, "mqtt"): cv.declare_id(mqtt.MQTTEventComponent),
+        cv.GenerateID(): cv.declare_id(Event),
+        cv.Optional(CONF_DEVICE_CLASS): validate_device_class,
+        cv.Optional(CONF_ON_EVENT): automation.validate_automation(
+            {
+                cv.GenerateID(CONF_TRIGGER_ID): cv.declare_id(EventTrigger),
+            }
+        ),
+    }
 )
 
 _UNDEF = object()
@@ -102,9 +97,6 @@ async def setup_event_core_(var, config, *, event_types: list[str]):
         mqtt_ = cg.new_Pvariable(mqtt_id, var)
         await mqtt.register_mqtt_component(mqtt_, config)
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
-
 
 async def register_event(var, config, *, event_types: list[str]):
     if not CORE.has_id(config[CONF_ID]):

esphome/components/fan/__init__.py

@@ -25,7 +25,7 @@ from esphome.const import (
     CONF_SPEED_LEVEL_STATE_TOPIC,
     CONF_SPEED_STATE_TOPIC,
     CONF_TRIGGER_ID,
-    CONF_WEB_SERVER,
+    CONF_WEB_SERVER_ID,
 )
 from esphome.core import CORE, coroutine_with_priority
 from esphome.cpp_helpers import setup_entity
@@ -218,8 +218,9 @@ async def setup_fan_core_(var, config):
         if (speed_command_topic := config.get(CONF_SPEED_COMMAND_TOPIC)) is not None:
             cg.add(mqtt_.set_custom_speed_command_topic(speed_command_topic))
 
-    if web_server_config := config.get(CONF_WEB_SERVER):
-        await web_server.add_entity_config(var, web_server_config)
+    if (webserver_id := config.get(CONF_WEB_SERVER_ID)) is not None:
+        web_server_ = await cg.get_variable(webserver_id)
+        web_server.add_entity_to_sorting_list(web_server_, var, config)
 
     for conf in config.get(CONF_ON_STATE, []):
         trigger = cg.new_Pvariable(conf[CONF_TRIGGER_ID], var)

esphome/components/gp2y1010au0f/gp2y1010au0f.cpp

@@ -1,67 +0,0 @@
-#include "gp2y1010au0f.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/log.h"
-
-#include <cinttypes>
-
-namespace esphome {
-namespace gp2y1010au0f {
-
-static const char *const TAG = "gp2y1010au0f";
-static const float MIN_VOLTAGE = 0.0f;
-static const float MAX_VOLTAGE = 4.0f;
-
-void GP2Y1010AU0FSensor::dump_config() {
-  LOG_SENSOR("", "Sharp GP2Y1010AU0F PM2.5 Sensor", this);
-  ESP_LOGCONFIG(TAG, "  Sampling duration: %" PRId32 " ms", this->sample_duration_);
-  ESP_LOGCONFIG(TAG, "  ADC voltage multiplier: %.3f", this->voltage_multiplier_);
-  LOG_UPDATE_INTERVAL(this);
-}
-
-void GP2Y1010AU0FSensor::update() {
-  is_sampling_ = true;
-
-  this->set_timeout("read", this->sample_duration_, [this]() {
-    this->is_sampling_ = false;
-    if (this->num_samples_ == 0)
-      return;
-
-    float mean = this->sample_sum_ / float(this->num_samples_);
-    ESP_LOGD(TAG, "ADC read voltage: %.3f V (mean from %" PRId32 " samples)", mean, this->num_samples_);
-
-    // PM2.5 calculation
-    // ref: https://www.howmuchsnow.com/arduino/airquality/
-    int16_t pm_2_5_value = 170 * mean;
-    this->publish_state(pm_2_5_value);
-  });
-
-  // reset readings
-  this->num_samples_ = 0;
-  this->sample_sum_ = 0.0f;
-}
-
-void GP2Y1010AU0FSensor::loop() {
-  if (!this->is_sampling_)
-    return;
-
-  // enable the internal IR LED
-  this->led_output_->turn_on();
-  // wait for the sensor to stabilize
-  delayMicroseconds(this->sample_wait_before_);
-  // perform a single sample
-  float read_voltage = this->source_->sample();
-  // disable the internal IR LED
-  this->led_output_->turn_off();
-
-  if (std::isnan(read_voltage))
-    return;
-  read_voltage = read_voltage * this->voltage_multiplier_ - this->voltage_offset_;
-  if (read_voltage < MIN_VOLTAGE || read_voltage > MAX_VOLTAGE)
-    return;
-
-  this->num_samples_++;
-  this->sample_sum_ += read_voltage;
-}
-
-}  // namespace gp2y1010au0f
-}  // namespace esphome

esphome/components/gp2y1010au0f/gp2y1010au0f.h

@@ -1,52 +0,0 @@
-#pragma once
-
-#include "esphome/core/component.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/components/voltage_sampler/voltage_sampler.h"
-#include "esphome/components/output/binary_output.h"
-
-namespace esphome {
-namespace gp2y1010au0f {
-
-class GP2Y1010AU0FSensor : public sensor::Sensor, public PollingComponent {
- public:
-  void update() override;
-  void loop() override;
-  void dump_config() override;
-  float get_setup_priority() const override {
-    // after the base sensor has been initialized
-    return setup_priority::DATA - 1.0f;
-  }
-
-  void set_adc_source(voltage_sampler::VoltageSampler *source) { source_ = source; }
-  void set_voltage_refs(float offset, float multiplier) {
-    this->voltage_offset_ = offset;
-    this->voltage_multiplier_ = multiplier;
-  }
-  void set_led_output(output::BinaryOutput *output) { led_output_ = output; }
-
- protected:
-  // duration in ms of the sampling phase
-  uint32_t sample_duration_ = 100;
-  // duration in us of the wait before sampling
-  // ref: https://global.sharp/products/device/lineup/data/pdf/datasheet/gp2y1010au_appl_e.pdf
-  uint32_t sample_wait_before_ = 280;
-  // duration in us of the wait after sampling
-  // it seems no need to delay on purpose since one ADC sampling takes longer than that (300-400 us on ESP8266)
-  // uint32_t sample_wait_after_ = 40;
-  // the sampling source to read voltage from
-  voltage_sampler::VoltageSampler *source_;
-  // ADC voltage reading offset
-  float voltage_offset_ = 0.0f;
-  // ADC voltage reading multiplier
-  float voltage_multiplier_ = 1.0f;
-  // the binary output to control the sampling LED
-  output::BinaryOutput *led_output_;
-
-  float sample_sum_ = 0.0f;
-  uint32_t num_samples_ = 0;
-  bool is_sampling_ = false;
-};
-
-}  // namespace gp2y1010au0f
-}  // namespace esphome

esphome/components/gp2y1010au0f/sensor.py

@@ -1,61 +0,0 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import sensor, voltage_sampler, output
-from esphome.const import (
-    CONF_SENSOR,
-    CONF_OUTPUT,
-    DEVICE_CLASS_PM25,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_MICROGRAMS_PER_CUBIC_METER,
-    ICON_CHEMICAL_WEAPON,
-)
-
-DEPENDENCIES = ["output"]
-AUTO_LOAD = ["voltage_sampler"]
-CODEOWNERS = ["@zry98"]
-
-CONF_ADC_VOLTAGE_OFFSET = "adc_voltage_offset"
-CONF_ADC_VOLTAGE_MULTIPLIER = "adc_voltage_multiplier"
-
-gp2y1010au0f_ns = cg.esphome_ns.namespace("gp2y1010au0f")
-GP2Y1010AU0FSensor = gp2y1010au0f_ns.class_(
-    "GP2Y1010AU0FSensor", sensor.Sensor, cg.PollingComponent
-)
-
-CONFIG_SCHEMA = (
-    sensor.sensor_schema(
-        GP2Y1010AU0FSensor,
-        unit_of_measurement=UNIT_MICROGRAMS_PER_CUBIC_METER,
-        accuracy_decimals=0,
-        device_class=DEVICE_CLASS_PM25,
-        state_class=STATE_CLASS_MEASUREMENT,
-        icon=ICON_CHEMICAL_WEAPON,
-    )
-    .extend(
-        {
-            cv.Required(CONF_SENSOR): cv.use_id(voltage_sampler.VoltageSampler),
-            cv.Optional(CONF_ADC_VOLTAGE_OFFSET, default=0.0): cv.float_,
-            cv.Optional(CONF_ADC_VOLTAGE_MULTIPLIER, default=1.0): cv.float_,
-            cv.Required(CONF_OUTPUT): cv.use_id(output.BinaryOutput),
-        }
-    )
-    .extend(cv.polling_component_schema("60s"))
-)
-
-
-async def to_code(config):
-    var = await sensor.new_sensor(config)
-    await cg.register_component(var, config)
-
-    # the ADC sensor to read voltage from
-    adc_sensor = await cg.get_variable(config[CONF_SENSOR])
-    cg.add(var.set_adc_source(adc_sensor))
-    cg.add(
-        var.set_voltage_refs(
-            config[CONF_ADC_VOLTAGE_OFFSET], config[CONF_ADC_VOLTAGE_MULTIPLIER]
-        )
-    )
-
-    # the binary output to control the module's internal IR LED
-    led_output = await cg.get_variable(config[CONF_OUTPUT])
-    cg.add(var.set_led_output(led_output))

esphome/components/gpio_expander/cached_gpio.h

@@ -1,38 +0,0 @@
-#pragma once
-
-#include <array>
-#include <cstdint>
-#include "esphome/core/hal.h"
-
-namespace esphome {
-namespace gpio_expander {
-
-/// @brief A class to cache the read state of a GPIO expander.
-template<typename T, T N> class CachedGpioExpander {
- public:
-  bool digital_read(T pin) {
-    if (!this->read_cache_invalidated_[pin]) {
-      this->read_cache_invalidated_[pin] = true;
-      return this->digital_read_cache(pin);
-    }
-    return this->digital_read_hw(pin);
-  }
-
-  void digital_write(T pin, bool value) { this->digital_write_hw(pin, value); }
-
- protected:
-  virtual bool digital_read_hw(T pin) = 0;
-  virtual bool digital_read_cache(T pin) = 0;
-  virtual void digital_write_hw(T pin, bool value) = 0;
-
-  void reset_pin_cache_() {
-    for (T i = 0; i < N; i++) {
-      this->read_cache_invalidated_[i] = false;
-    }
-  }
-
-  std::array<bool, N> read_cache_invalidated_{};
-};
-
-}  // namespace gpio_expander
-}  // namespace esphome

esphome/components/grove_gas_mc_v2/grove_gas_mc_v2.cpp

@@ -1,88 +0,0 @@
-#include "grove_gas_mc_v2.h"
-#include "esphome/core/hal.h"
-#include "esphome/core/log.h"
-
-namespace esphome {
-namespace grove_gas_mc_v2 {
-
-static const char *const TAG = "grove_gas_mc_v2";
-
-// I2C Commands for Grove Gas Multichannel V2 Sensor
-// Taken from:
-// https://github.com/Seeed-Studio/Seeed_Arduino_MultiGas/blob/master/src/Multichannel_Gas_GroveGasMultichannelV2.h
-static const uint8_t GROVE_GAS_MC_V2_HEAT_ON = 0xFE;
-static const uint8_t GROVE_GAS_MC_V2_HEAT_OFF = 0xFF;
-static const uint8_t GROVE_GAS_MC_V2_READ_GM102B = 0x01;
-static const uint8_t GROVE_GAS_MC_V2_READ_GM302B = 0x03;
-static const uint8_t GROVE_GAS_MC_V2_READ_GM502B = 0x05;
-static const uint8_t GROVE_GAS_MC_V2_READ_GM702B = 0x07;
-
-bool GroveGasMultichannelV2Component::read_sensor_(uint8_t address, sensor::Sensor *sensor) {
-  if (sensor == nullptr) {
-    return true;
-  }
-  uint32_t value = 0;
-  if (!this->read_bytes(address, (uint8_t *) &value, 4)) {
-    ESP_LOGW(TAG, "Reading Grove Gas Sensor data failed!");
-    this->error_code_ = COMMUNICATION_FAILED;
-    this->status_set_warning();
-    return false;
-  }
-  sensor->publish_state(value);
-  return true;
-}
-
-void GroveGasMultichannelV2Component::setup() {
-  ESP_LOGCONFIG(TAG, "Setting up Grove Multichannel Gas Sensor V2...");
-
-  // Before reading sensor values, must preheat sensor
-  if (!(this->write_bytes(GROVE_GAS_MC_V2_HEAT_ON, {}))) {
-    this->mark_failed();
-    this->error_code_ = APP_START_FAILED;
-  }
-}
-
-void GroveGasMultichannelV2Component::update() {
-  // Read from each of the gas sensors
-  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM102B, this->nitrogen_dioxide_sensor_))
-    return;
-  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM302B, this->ethanol_sensor_))
-    return;
-  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM502B, this->tvoc_sensor_))
-    return;
-  if (!this->read_sensor_(GROVE_GAS_MC_V2_READ_GM702B, this->carbon_monoxide_sensor_))
-    return;
-
-  this->status_clear_warning();
-}
-
-void GroveGasMultichannelV2Component::dump_config() {
-  ESP_LOGCONFIG(TAG, "Grove Multichannel Gas Sensor V2");
-  LOG_I2C_DEVICE(this)
-  LOG_UPDATE_INTERVAL(this)
-  LOG_SENSOR("  ", "Nitrogen Dioxide", this->nitrogen_dioxide_sensor_)
-  LOG_SENSOR("  ", "Ethanol", this->ethanol_sensor_)
-  LOG_SENSOR("  ", "Carbon Monoxide", this->carbon_monoxide_sensor_)
-  LOG_SENSOR("  ", "TVOC", this->tvoc_sensor_)
-
-  if (this->is_failed()) {
-    switch (this->error_code_) {
-      case COMMUNICATION_FAILED:
-        ESP_LOGW(TAG, "Communication failed! Is the sensor connected?");
-        break;
-      case APP_INVALID:
-        ESP_LOGW(TAG, "Sensor reported invalid APP installed.");
-        break;
-      case APP_START_FAILED:
-        ESP_LOGW(TAG, "Sensor reported APP start failed.");
-        break;
-      case UNKNOWN:
-      default:
-        ESP_LOGW(TAG, "Unknown setup error!");
-        break;
-    }
-  }
-}
-
-}  // namespace grove_gas_mc_v2
-}  // namespace esphome

esphome/components/grove_gas_mc_v2/grove_gas_mc_v2.h

@@ -1,39 +0,0 @@
-#pragma once
-
-#include "esphome/components/i2c/i2c.h"
-#include "esphome/components/sensor/sensor.h"
-#include "esphome/core/component.h"
-#include "esphome/core/preferences.h"
-
-namespace esphome {
-namespace grove_gas_mc_v2 {
-
-class GroveGasMultichannelV2Component : public PollingComponent, public i2c::I2CDevice {
-  SUB_SENSOR(tvoc)
-  SUB_SENSOR(carbon_monoxide)
-  SUB_SENSOR(nitrogen_dioxide)
-  SUB_SENSOR(ethanol)
-
- public:
-  /// Setup the sensor and test for a connection.
-  void setup() override;
-  /// Schedule temperature+pressure readings.
-  void update() override;
-
-  void dump_config() override;
-
-  float get_setup_priority() const override { return setup_priority::DATA; }
-
- protected:
-  enum ErrorCode {
-    UNKNOWN,
-    COMMUNICATION_FAILED,
-    APP_INVALID,
-    APP_START_FAILED,
-  } error_code_{UNKNOWN};
-
-  bool read_sensor_(uint8_t address, sensor::Sensor *sensor);
-};
-
-}  // namespace grove_gas_mc_v2
-}  // namespace esphome

esphome/components/grove_gas_mc_v2/sensor.py

@@ -1,77 +0,0 @@
-import esphome.codegen as cg
-from esphome.components import i2c, sensor
-import esphome.config_validation as cv
-from esphome.const import (
-    CONF_CARBON_MONOXIDE,
-    CONF_ETHANOL,
-    CONF_ID,
-    CONF_NITROGEN_DIOXIDE,
-    CONF_TVOC,
-    DEVICE_CLASS_CARBON_MONOXIDE,
-    DEVICE_CLASS_NITROGEN_DIOXIDE,
-    DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
-    ICON_AIR_FILTER,
-    ICON_FLASK_ROUND_BOTTOM,
-    ICON_GAS_CYLINDER,
-    ICON_MOLECULE_CO,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_MICROGRAMS_PER_CUBIC_METER,
-    UNIT_PARTS_PER_MILLION,
-)
-
-CODEOWNERS = ["@YorkshireIoT"]
-DEPENDENCIES = ["i2c"]
-
-grove_gas_mc_v2_ns = cg.esphome_ns.namespace("grove_gas_mc_v2")
-
-GroveGasMultichannelV2Component = grove_gas_mc_v2_ns.class_(
-    "GroveGasMultichannelV2Component", cg.PollingComponent, i2c.I2CDevice
-)
-
-CONFIG_SCHEMA = (
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(GroveGasMultichannelV2Component),
-            cv.Optional(CONF_TVOC): sensor.sensor_schema(
-                unit_of_measurement=UNIT_MICROGRAMS_PER_CUBIC_METER,
-                icon=ICON_AIR_FILTER,
-                accuracy_decimals=0,
-                device_class=DEVICE_CLASS_VOLATILE_ORGANIC_COMPOUNDS,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_CARBON_MONOXIDE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_MILLION,
-                icon=ICON_MOLECULE_CO,
-                accuracy_decimals=0,
-                device_class=DEVICE_CLASS_CARBON_MONOXIDE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_NITROGEN_DIOXIDE): sensor.sensor_schema(
-                unit_of_measurement=UNIT_MICROGRAMS_PER_CUBIC_METER,
-                icon=ICON_GAS_CYLINDER,
-                accuracy_decimals=0,
-                device_class=DEVICE_CLASS_NITROGEN_DIOXIDE,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-            cv.Optional(CONF_ETHANOL): sensor.sensor_schema(
-                unit_of_measurement=UNIT_PARTS_PER_MILLION,
-                icon=ICON_FLASK_ROUND_BOTTOM,
-                accuracy_decimals=0,
-                state_class=STATE_CLASS_MEASUREMENT,
-            ),
-        }
-    )
-    .extend(cv.polling_component_schema("60s"))
-    .extend(i2c.i2c_device_schema(0x08))
-)
-
-
-async def to_code(config):
-    var = cg.new_Pvariable(config[CONF_ID])
-    await cg.register_component(var, config)
-    await i2c.register_i2c_device(var, config)
-
-    for key in [CONF_TVOC, CONF_CARBON_MONOXIDE, CONF_NITROGEN_DIOXIDE, CONF_ETHANOL]:
-        if sensor_config := config.get(key):
-            sensor_ = await sensor.new_sensor(sensor_config)
-            cg.add(getattr(var, f"set_{key}_sensor")(sensor_))

esphome/components/haier/climate.py

@@ -114,6 +114,7 @@ SUPPORTED_CLIMATE_PRESETS_SMARTAIR2_OPTIONS = {
 SUPPORTED_CLIMATE_PRESETS_HON_OPTIONS = {
     "AWAY": ClimatePreset.CLIMATE_PRESET_AWAY,
     "BOOST": ClimatePreset.CLIMATE_PRESET_BOOST,
+    "ECO": ClimatePreset.CLIMATE_PRESET_ECO,
     "SLEEP": ClimatePreset.CLIMATE_PRESET_SLEEP,
 }
 
@@ -239,9 +240,7 @@ CONFIG_SCHEMA = cv.All(
                     ): cv.ensure_list(
                         cv.enum(SUPPORTED_HON_CONTROL_METHODS, upper=True)
                     ),
-                    cv.Optional(CONF_BEEPER): cv.invalid(
-                        f"The {CONF_BEEPER} option is deprecated, use beeper_on/beeper_off actions or beeper switch for a haier platform instead"
-                    ),
+                    cv.Optional(CONF_BEEPER, default=True): cv.boolean,
                     cv.Optional(
                         CONF_CONTROL_PACKET_SIZE, default=PROTOCOL_CONTROL_PACKET_SIZE
                     ): cv.int_range(min=PROTOCOL_CONTROL_PACKET_SIZE, max=50),
@@ -255,7 +254,7 @@ CONFIG_SCHEMA = cv.All(
                     ): cv.int_range(min=PROTOCOL_STATUS_MESSAGE_HEADER_SIZE),
                     cv.Optional(
                         CONF_SUPPORTED_PRESETS,
-                        default=["BOOST", "SLEEP"],  # No AWAY by default
+                        default=["BOOST", "ECO", "SLEEP"],  # No AWAY by default
                     ): cv.ensure_list(
                         cv.enum(SUPPORTED_CLIMATE_PRESETS_HON_OPTIONS, upper=True)
                     ),

esphome/components/haier/haier_base.cpp

@@ -52,6 +52,8 @@ bool check_timeout(std::chrono::steady_clock::time_point now, std::chrono::stead
 HaierClimateBase::HaierClimateBase()
     : haier_protocol_(*this),
       protocol_phase_(ProtocolPhases::SENDING_INIT_1),
+      display_status_(true),
+      health_mode_(false),
       force_send_control_(false),
       forced_request_status_(false),
       reset_protocol_request_(false),
@@ -125,34 +127,21 @@ haier_protocol::HaierMessage HaierClimateBase::get_wifi_signal_message_() {
 }
 #endif
 
-void HaierClimateBase::save_settings() {
-  HaierBaseSettings settings{this->get_health_mode(), this->get_display_state()};
-  if (!this->base_rtc_.save(&settings)) {
-    ESP_LOGW(TAG, "Failed to save settings");
-  }
-}
-
-bool HaierClimateBase::get_display_state() const {
-  return (this->display_status_ == SwitchState::ON) || (this->display_status_ == SwitchState::PENDING_ON);
-}
+bool HaierClimateBase::get_display_state() const { return this->display_status_; }
 
 void HaierClimateBase::set_display_state(bool state) {
-  if (state != this->get_display_state()) {
-    this->display_status_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+  if (this->display_status_ != state) {
+    this->display_status_ = state;
     this->force_send_control_ = true;
-    this->save_settings();
   }
 }
 
-bool HaierClimateBase::get_health_mode() const {
-  return (this->health_mode_ == SwitchState::ON) || (this->health_mode_ == SwitchState::PENDING_ON);
-}
+bool HaierClimateBase::get_health_mode() const { return this->health_mode_; }
 
 void HaierClimateBase::set_health_mode(bool state) {
-  if (state != this->get_health_mode()) {
-    this->health_mode_ = state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
+  if (this->health_mode_ != state) {
+    this->health_mode_ = state;
     this->force_send_control_ = true;
-    this->save_settings();
   }
 }
 
@@ -298,14 +287,6 @@ void HaierClimateBase::loop() {
   }
   this->process_phase(now);
   this->haier_protocol_.loop();
-#ifdef USE_SWITCH
-  if ((this->display_switch_ != nullptr) && (this->display_switch_->state != this->get_display_state())) {
-    this->display_switch_->publish_state(this->get_display_state());
-  }
-  if ((this->health_mode_switch_ != nullptr) && (this->health_mode_switch_->state != this->get_health_mode())) {
-    this->health_mode_switch_->publish_state(this->get_health_mode());
-  }
-#endif  // USE_SWITCH
 }
 
 void HaierClimateBase::process_protocol_reset() {
@@ -348,26 +329,6 @@ bool HaierClimateBase::prepare_pending_action() {
 
 ClimateTraits HaierClimateBase::traits() { return traits_; }
 
-void HaierClimateBase::initialization() {
-  constexpr uint32_t restore_settings_version = 0xA77D21EF;
-  this->base_rtc_ =
-      global_preferences->make_preference<HaierBaseSettings>(this->get_object_id_hash() ^ restore_settings_version);
-  HaierBaseSettings recovered;
-  if (!this->base_rtc_.load(&recovered)) {
-    recovered = {false, true};
-  }
-  this->display_status_ = recovered.display_state ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
-  this->health_mode_ = recovered.health_mode ? SwitchState::PENDING_ON : SwitchState::PENDING_OFF;
-#ifdef USE_SWITCH
-  if (this->display_switch_ != nullptr) {
-    this->display_switch_->publish_state(this->get_display_state());
-  }
-  if (this->health_mode_switch_ != nullptr) {
-    this->health_mode_switch_->publish_state(this->get_health_mode());
-  }
-#endif
-}
-
 void HaierClimateBase::control(const ClimateCall &call) {
   ESP_LOGD("Control", "Control call");
   if (!this->valid_connection()) {
@@ -392,22 +353,6 @@ void HaierClimateBase::control(const ClimateCall &call) {
   }
 }
 
-#ifdef USE_SWITCH
-void HaierClimateBase::set_display_switch(switch_::Switch *sw) {
-  this->display_switch_ = sw;
-  if ((this->display_switch_ != nullptr) && (this->valid_connection())) {
-    this->display_switch_->publish_state(this->get_display_state());
-  }
-}
-
-void HaierClimateBase::set_health_mode_switch(switch_::Switch *sw) {
-  this->health_mode_switch_ = sw;
-  if ((this->health_mode_switch_ != nullptr) && (this->valid_connection())) {
-    this->health_mode_switch_->publish_state(this->get_health_mode());
-  }
-}
-#endif
-
 void HaierClimateBase::HvacSettings::reset() {
   this->valid = false;
   this->mode.reset();

esphome/components/haier/haier_base.h

@@ -8,10 +8,6 @@
 // HaierProtocol
 #include <protocol/haier_protocol.h>
 
-#ifdef USE_SWITCH
-#include "esphome/components/switch/switch.h"
-#endif
-
 namespace esphome {
 namespace haier {
 
@@ -24,24 +20,10 @@ enum class ActionRequest : uint8_t {
   START_STERI_CLEAN = 5,  // only hOn
 };
 
-struct HaierBaseSettings {
-  bool health_mode;
-  bool display_state;
-};
-
 class HaierClimateBase : public esphome::Component,
                          public esphome::climate::Climate,
                          public esphome::uart::UARTDevice,
                          public haier_protocol::ProtocolStream {
-#ifdef USE_SWITCH
- public:
-  void set_display_switch(switch_::Switch *sw);
-  void set_health_mode_switch(switch_::Switch *sw);
-
- protected:
-  switch_::Switch *display_switch_{nullptr};
-  switch_::Switch *health_mode_switch_{nullptr};
-#endif
  public:
   HaierClimateBase();
   HaierClimateBase(const HaierClimateBase &) = delete;
@@ -100,8 +82,7 @@ class HaierClimateBase : public esphome::Component,
   virtual void process_phase(std::chrono::steady_clock::time_point now) = 0;
   virtual haier_protocol::HaierMessage get_control_message() = 0;          // NOLINT(readability-identifier-naming)
   virtual haier_protocol::HaierMessage get_power_message(bool state) = 0;  // NOLINT(readability-identifier-naming)
-  virtual void save_settings();
-  virtual void initialization();
+  virtual void initialization(){};
   virtual bool prepare_pending_action();
   virtual void process_protocol_reset();
   esphome::climate::ClimateTraits traits() override;
@@ -146,19 +127,13 @@ class HaierClimateBase : public esphome::Component,
     ActionRequest action;
     esphome::optional<haier_protocol::HaierMessage> message;
   };
-  enum class SwitchState {
-    OFF = 0b00,
-    ON = 0b01,
-    PENDING_OFF = 0b10,
-    PENDING_ON = 0b11,
-  };
   haier_protocol::ProtocolHandler haier_protocol_;
   ProtocolPhases protocol_phase_;
   esphome::optional<PendingAction> action_request_;
   uint8_t fan_mode_speed_;
   uint8_t other_modes_fan_speed_;
-  SwitchState display_status_{SwitchState::ON};
-  SwitchState health_mode_{SwitchState::OFF};
+  bool display_status_;
+  bool health_mode_;
   bool force_send_control_;
   bool forced_request_status_;
   bool reset_protocol_request_;
@@ -173,7 +148,6 @@ class HaierClimateBase : public esphome::Component,
   std::chrono::steady_clock::time_point last_status_request_;          // To request AC status
   std::chrono::steady_clock::time_point last_signal_request_;          // To send WiFI signal level
   CallbackManager<void(const char *, size_t)> status_message_callback_{};
-  ESPPreferenceObject base_rtc_;
 };
 
 class StatusMessageTrigger : public Trigger<const char *, size_t> {