Merge pull request #3245 from esphome/bump-2022.2.4

2022.2.4

docker/Dockerfile

@@ -43,7 +43,7 @@ RUN \
     # Ubuntu python3-pip is missing wheel
     pip3 install --no-cache-dir \
         wheel==0.37.1 \
-        platformio==5.2.4 \
+        platformio==5.2.5 \
     # Change some platformio settings
     && platformio settings set enable_telemetry No \
     && platformio settings set check_libraries_interval 1000000 \

docker/ha-addon-rootfs/etc/cont-init.d/10-requirements.sh

@@ -7,12 +7,12 @@
 # Check SSL requirements, if enabled
 if bashio::config.true 'ssl'; then
     if ! bashio::config.has_value 'certfile'; then
-        bashio::fatal 'SSL is enabled, but no certfile was specified.'
+        bashio::log.fatal 'SSL is enabled, but no certfile was specified.'
         bashio::exit.nok
     fi
 
     if ! bashio::config.has_value 'keyfile'; then
-        bashio::fatal 'SSL is enabled, but no keyfile was specified'
+        bashio::log.fatal 'SSL is enabled, but no keyfile was specified'
         bashio::exit.nok
     fi
 

esphome/components/climate/climate.cpp

@@ -1,4 +1,5 @@
 #include "climate.h"
+#include "esphome/core/macros.h"
 
 namespace esphome {
 namespace climate {
@@ -326,14 +327,17 @@ optional<ClimateDeviceRestoreState> Climate::restore_state_() {
   return recovered;
 }
 void Climate::save_state_() {
-#if defined(USE_ESP_IDF) && !defined(CLANG_TIDY)
+#if (defined(USE_ESP_IDF) || (defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(3, 0, 0))) && \
+    !defined(CLANG_TIDY)
 #pragma GCC diagnostic ignored "-Wclass-memaccess"
+#define TEMP_IGNORE_MEMACCESS
 #endif
   ClimateDeviceRestoreState state{};
   // initialize as zero to prevent random data on stack triggering erase
   memset(&state, 0, sizeof(ClimateDeviceRestoreState));
-#if USE_ESP_IDF && !defined(CLANG_TIDY)
+#ifdef TEMP_IGNORE_MEMACCESS
 #pragma GCC diagnostic pop
+#undef TEMP_IGNORE_MEMACCESS
 #endif
 
   state.mode = this->mode;

esphome/components/dallas/dallas_component.cpp

@@ -110,6 +110,9 @@ void DallasComponent::update() {
   if (!result) {
     ESP_LOGE(TAG, "Requesting conversion failed");
     this->status_set_warning();
+    for (auto *sensor : this->sensors_) {
+      sensor->publish_state(NAN);
+    }
     return;
   }
 

esphome/components/debug/debug_component.cpp

@@ -53,9 +53,9 @@ void DebugComponent::dump_config() {
 #ifdef USE_SENSOR
   LOG_SENSOR("  ", "Free space on heap", this->free_sensor_);
   LOG_SENSOR("  ", "Largest free heap block", this->block_sensor_);
-#if defined(USE_ESP8266) && ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+#if defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
   LOG_SENSOR("  ", "Heap fragmentation", this->fragmentation_sensor_);
-#endif  // defined(USE_ESP8266) && ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+#endif  // defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
 #endif  // USE_SENSOR
 
   ESP_LOGD(TAG, "ESPHome version %s", ESPHOME_VERSION);
@@ -316,7 +316,7 @@ void DebugComponent::update() {
 #endif
   }
 
-#if defined(USE_ESP8266) && ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+#if defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
   if (this->fragmentation_sensor_ != nullptr) {
     // NOLINTNEXTLINE(readability-static-accessed-through-instance)
     this->fragmentation_sensor_->publish_state(ESP.getHeapFragmentation());

esphome/components/debug/debug_component.h

@@ -28,7 +28,7 @@ class DebugComponent : public PollingComponent {
 #ifdef USE_SENSOR
   void set_free_sensor(sensor::Sensor *free_sensor) { free_sensor_ = free_sensor; }
   void set_block_sensor(sensor::Sensor *block_sensor) { block_sensor_ = block_sensor; }
-#if defined(USE_ESP8266) && ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+#if defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
   void set_fragmentation_sensor(sensor::Sensor *fragmentation_sensor) { fragmentation_sensor_ = fragmentation_sensor; }
 #endif
   void set_loop_time_sensor(sensor::Sensor *loop_time_sensor) { loop_time_sensor_ = loop_time_sensor; }
@@ -42,7 +42,7 @@ class DebugComponent : public PollingComponent {
 
   sensor::Sensor *free_sensor_{nullptr};
   sensor::Sensor *block_sensor_{nullptr};
-#if defined(USE_ESP8266) && ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
+#if defined(USE_ESP8266) && USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 5, 2)
   sensor::Sensor *fragmentation_sensor_{nullptr};
 #endif
   sensor::Sensor *loop_time_sensor_{nullptr};

esphome/components/debug/sensor.py

@@ -6,6 +6,7 @@ from esphome.const import (
     CONF_FRAGMENTATION,
     CONF_BLOCK,
     CONF_LOOP_TIME,
+    ENTITY_CATEGORY_DIAGNOSTIC,
     UNIT_MILLISECOND,
     UNIT_PERCENT,
     UNIT_BYTES,
@@ -18,14 +19,34 @@ DEPENDENCIES = ["debug"]
 
 CONFIG_SCHEMA = {
     cv.GenerateID(CONF_DEBUG_ID): cv.use_id(DebugComponent),
-    cv.Optional(CONF_FREE): sensor.sensor_schema(UNIT_BYTES, ICON_COUNTER, 0),
-    cv.Optional(CONF_BLOCK): sensor.sensor_schema(UNIT_BYTES, ICON_COUNTER, 0),
+    cv.Optional(CONF_FREE): sensor.sensor_schema(
+        unit_of_measurement=UNIT_BYTES,
+        icon=ICON_COUNTER,
+        accuracy_decimals=0,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
+    cv.Optional(CONF_BLOCK): sensor.sensor_schema(
+        unit_of_measurement=UNIT_BYTES,
+        icon=ICON_COUNTER,
+        accuracy_decimals=0,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+    ),
     cv.Optional(CONF_FRAGMENTATION): cv.All(
         cv.only_on_esp8266,
         cv.require_framework_version(esp8266_arduino=cv.Version(2, 5, 2)),
-        sensor.sensor_schema(UNIT_PERCENT, ICON_COUNTER, 1),
+        sensor.sensor_schema(
+            unit_of_measurement=UNIT_PERCENT,
+            icon=ICON_COUNTER,
+            accuracy_decimals=1,
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
+        ),
+    ),
+    cv.Optional(CONF_LOOP_TIME): sensor.sensor_schema(
+        unit_of_measurement=UNIT_MILLISECOND,
+        icon=ICON_TIMER,
+        accuracy_decimals=0,
+        entity_category=ENTITY_CATEGORY_DIAGNOSTIC,
     ),
-    cv.Optional(CONF_LOOP_TIME): sensor.sensor_schema(UNIT_MILLISECOND, ICON_TIMER, 0),
 }
 
 

esphome/components/debug/text_sensor.py

@@ -1,7 +1,7 @@
 from esphome.components import text_sensor
 import esphome.config_validation as cv
 import esphome.codegen as cg
-from esphome.const import CONF_DEVICE
+from esphome.const import CONF_DEVICE, ENTITY_CATEGORY_DIAGNOSTIC
 
 from . import CONF_DEBUG_ID, DebugComponent
 
@@ -11,7 +11,9 @@ DEPENDENCIES = ["debug"]
 CONFIG_SCHEMA = cv.Schema(
     {
         cv.GenerateID(CONF_DEBUG_ID): cv.use_id(DebugComponent),
-        cv.Optional(CONF_DEVICE): text_sensor.text_sensor_schema(),
+        cv.Optional(CONF_DEVICE): text_sensor.text_sensor_schema(
+            entity_category=ENTITY_CATEGORY_DIAGNOSTIC
+        ),
     }
 )
 

esphome/components/deep_sleep/__init__.py

@@ -11,9 +11,39 @@ from esphome.const import (
     CONF_WAKEUP_PIN,
 )
 
+from esphome.components.esp32 import get_esp32_variant
+from esphome.components.esp32.const import (
+    VARIANT_ESP32,
+    VARIANT_ESP32C3,
+)
+
+WAKEUP_PINS = {
+    VARIANT_ESP32: [
+        0,
+        2,
+        4,
+        12,
+        13,
+        14,
+        15,
+        25,
+        26,
+        27,
+        32,
+        33,
+        34,
+        35,
+        36,
+        37,
+        38,
+        39,
+    ],
+    VARIANT_ESP32C3: [0, 1, 2, 3, 4, 5],
+}
+
 
 def validate_pin_number(value):
-    valid_pins = [0, 2, 4, 12, 13, 14, 15, 25, 26, 27, 32, 33, 34, 35, 36, 37, 38, 39]
+    valid_pins = WAKEUP_PINS.get(get_esp32_variant(), WAKEUP_PINS[VARIANT_ESP32])
     if value[CONF_NUMBER] not in valid_pins:
         raise cv.Invalid(
             f"Only pins {', '.join(str(x) for x in valid_pins)} support wakeup"
@@ -21,6 +51,14 @@ def validate_pin_number(value):
     return value
 
 
+def validate_config(config):
+    if get_esp32_variant() == VARIANT_ESP32C3 and CONF_ESP32_EXT1_WAKEUP in config:
+        raise cv.Invalid("ESP32-C3 does not support wakeup from touch.")
+    if get_esp32_variant() == VARIANT_ESP32C3 and CONF_TOUCH_WAKEUP in config:
+        raise cv.Invalid("ESP32-C3 does not support wakeup from ext1")
+    return config
+
+
 deep_sleep_ns = cg.esphome_ns.namespace("deep_sleep")
 DeepSleepComponent = deep_sleep_ns.class_("DeepSleepComponent", cg.Component)
 EnterDeepSleepAction = deep_sleep_ns.class_("EnterDeepSleepAction", automation.Action)

esphome/components/deep_sleep/deep_sleep_component.cpp

@@ -104,7 +104,7 @@ void DeepSleepComponent::begin_sleep(bool manual) {
 
   App.run_safe_shutdown_hooks();
 
-#ifdef USE_ESP32
+#if defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32C3)
   if (this->sleep_duration_.has_value())
     esp_sleep_enable_timer_wakeup(*this->sleep_duration_);
   if (this->wakeup_pin_ != nullptr) {
@@ -126,6 +126,18 @@ void DeepSleepComponent::begin_sleep(bool manual) {
   esp_deep_sleep_start();
 #endif
 
+#ifdef USE_ESP32_VARIANT_ESP32C3
+  if (this->sleep_duration_.has_value())
+    esp_sleep_enable_timer_wakeup(*this->sleep_duration_);
+  if (this->wakeup_pin_ != nullptr) {
+    bool level = !this->wakeup_pin_->is_inverted();
+    if (this->wakeup_pin_mode_ == WAKEUP_PIN_MODE_INVERT_WAKEUP && this->wakeup_pin_->digital_read()) {
+      level = !level;
+    }
+    esp_deep_sleep_enable_gpio_wakeup(gpio_num_t(this->wakeup_pin_->get_pin()), level);
+  }
+#endif
+
 #ifdef USE_ESP8266
   ESP.deepSleep(*this->sleep_duration_);  // NOLINT(readability-static-accessed-through-instance)
 #endif

esphome/components/deep_sleep/deep_sleep_component.h

@@ -57,13 +57,16 @@ class DeepSleepComponent : public Component {
  public:
   /// Set the duration in ms the component should sleep once it's in deep sleep mode.
   void set_sleep_duration(uint32_t time_ms);
-#ifdef USE_ESP32
+#if defined(USE_ESP32)
   /** Set the pin to wake up to on the ESP32 once it's in deep sleep mode.
    * Use the inverted property to set the wakeup level.
    */
   void set_wakeup_pin(InternalGPIOPin *pin) { this->wakeup_pin_ = pin; }
 
   void set_wakeup_pin_mode(WakeupPinMode wakeup_pin_mode);
+#endif
+
+#if defined(USE_ESP32) && !defined(USE_ESP32_VARIANT_ESP32C3)
 
   void set_ext1_wakeup(Ext1Wakeup ext1_wakeup);
 

esphome/components/json/json_util.h

@@ -4,9 +4,10 @@
 
 #include "esphome/core/helpers.h"
 
-#undef ARDUINOJSON_ENABLE_STD_STRING
 #define ARDUINOJSON_ENABLE_STD_STRING 1  // NOLINT
 
+#define ARDUINOJSON_USE_LONG_LONG 1  // NOLINT
+
 #include <ArduinoJson.h>
 
 namespace esphome {

esphome/components/lilygo_t5_47/touchscreen/lilygo_t5_47_touchscreen.cpp

@@ -113,8 +113,27 @@ void LilygoT547Touchscreen::loop() {
       if (tp.state == 0x06)
         tp.state = 0x07;
 
-      tp.y = (uint16_t)((buffer[i * 5 + 1 + offset] << 4) | ((buffer[i * 5 + 3 + offset] >> 4) & 0x0F));
-      tp.x = (uint16_t)((buffer[i * 5 + 2 + offset] << 4) | (buffer[i * 5 + 3 + offset] & 0x0F));
+      uint16_t y = (uint16_t)((buffer[i * 5 + 1 + offset] << 4) | ((buffer[i * 5 + 3 + offset] >> 4) & 0x0F));
+      uint16_t x = (uint16_t)((buffer[i * 5 + 2 + offset] << 4) | (buffer[i * 5 + 3 + offset] & 0x0F));
+
+      switch (this->rotation_) {
+        case ROTATE_0_DEGREES:
+          tp.y = this->display_height_ - y;
+          tp.x = x;
+          break;
+        case ROTATE_90_DEGREES:
+          tp.x = this->display_height_ - y;
+          tp.y = this->display_width_ - x;
+          break;
+        case ROTATE_180_DEGREES:
+          tp.y = y;
+          tp.x = this->display_width_ - x;
+          break;
+        case ROTATE_270_DEGREES:
+          tp.x = y;
+          tp.y = x;
+          break;
+      }
 
       this->defer([this, tp]() { this->send_touch_(tp); });
     }
@@ -122,8 +141,28 @@ void LilygoT547Touchscreen::loop() {
     TouchPoint tp;
     tp.id = (buffer[0] >> 4) & 0x0F;
     tp.state = 0x06;
-    tp.y = (uint16_t)((buffer[0 * 5 + 1] << 4) | ((buffer[0 * 5 + 3] >> 4) & 0x0F));
-    tp.x = (uint16_t)((buffer[0 * 5 + 2] << 4) | (buffer[0 * 5 + 3] & 0x0F));
+
+    uint16_t y = (uint16_t)((buffer[0 * 5 + 1] << 4) | ((buffer[0 * 5 + 3] >> 4) & 0x0F));
+    uint16_t x = (uint16_t)((buffer[0 * 5 + 2] << 4) | (buffer[0 * 5 + 3] & 0x0F));
+
+    switch (this->rotation_) {
+      case ROTATE_0_DEGREES:
+        tp.y = this->display_height_ - y;
+        tp.x = x;
+        break;
+      case ROTATE_90_DEGREES:
+        tp.x = this->display_height_ - y;
+        tp.y = this->display_width_ - x;
+        break;
+      case ROTATE_180_DEGREES:
+        tp.y = y;
+        tp.x = this->display_width_ - x;
+        break;
+      case ROTATE_270_DEGREES:
+        tp.x = y;
+        tp.y = x;
+        break;
+    }
 
     this->defer([this, tp]() { this->send_touch_(tp); });
   }

esphome/components/ota/ota_backend_arduino_esp8266.h

@@ -17,7 +17,7 @@ class ArduinoESP8266OTABackend : public OTABackend {
   OTAResponseTypes write(uint8_t *data, size_t len) override;
   OTAResponseTypes end() override;
   void abort() override;
-#if ARDUINO_VERSION_CODE >= VERSION_CODE(2, 7, 0)
+#if USE_ARDUINO_VERSION_CODE >= VERSION_CODE(2, 7, 0)
   bool supports_compression() override { return true; }
 #else
   bool supports_compression() override { return false; }

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2022.2.0b3"
+__version__ = "2022.2.4"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 

esphome/core/scheduler.cpp

@@ -116,7 +116,7 @@ optional<uint32_t> HOT Scheduler::next_schedule_in() {
     return 0;
   return next_time - now;
 }
-void IRAM_ATTR HOT Scheduler::call() {
+void HOT Scheduler::call() {
   const uint32_t now = this->millis_();
   this->process_to_add();
 

requirements.txt

@@ -6,12 +6,12 @@ tornado==6.1
 tzlocal==4.1    # from time
 tzdata>=2021.1  # from time
 pyserial==3.5
-platformio==5.2.4  # When updating platformio, also update Dockerfile
+platformio==5.2.5  # When updating platformio, also update Dockerfile
 esptool==3.2
 click==8.0.3
 esphome-dashboard==20220209.0
 aioesphomeapi==10.8.2
-zeroconf==0.37.0
+zeroconf==0.38.3
 
 # esp-idf requires this, but doesn't bundle it by default
 # https://github.com/espressif/esp-idf/blob/220590d599e134d7a5e7f1e683cc4550349ffbf8/requirements.txt#L24

tests/test1.yaml

@@ -262,7 +262,7 @@ power_supply:
 deep_sleep:
   run_duration: 20s
   sleep_duration: 50s
-  wakeup_pin: GPIO39
+  wakeup_pin: GPIO2
   wakeup_pin_mode: INVERT_WAKEUP
 
 ads1115:

tests/test2.yaml

@@ -60,7 +60,7 @@ deep_sleep:
     gpio_wakeup_reason: 10s
     touch_wakeup_reason: 15s
   sleep_duration: 50s
-  wakeup_pin: GPIO39
+  wakeup_pin: GPIO2
   wakeup_pin_mode: INVERT_WAKEUP
 
 as3935_i2c: