Fix small index compare bug in modbus

fixes https://github.com/esphome/issues/issues/3904

docker/Dockerfile

@@ -12,6 +12,9 @@ FROM debian:bullseye-20221024-slim AS base-docker
 
 FROM base-${BASEIMGTYPE} AS base
 
+ARG TARGETARCH
+ARG TARGETVARIANT
+
 RUN \
     apt-get update \
     # Use pinned versions so that we get updates with build caching
@@ -36,6 +39,14 @@ ENV \
   # Store globally installed pio libs in /piolibs
   PLATFORMIO_GLOBALLIB_DIR=/piolibs
 
+# Support legacy binaries on Debian multiarch system. There is no "correct" way
+# to do this, other than using properly built toolchains...
+# See: https://unix.stackexchange.com/questions/553743/correct-way-to-add-lib-ld-linux-so-3-in-debian
+RUN \
+    if [ "$TARGETARCH$TARGETVARIANT" = "armv7" ]; then \
+        ln -s /lib/arm-linux-gnueabihf/ld-linux.so.3 /lib/ld-linux.so.3; \
+    fi
+
 RUN \
     # Ubuntu python3-pip is missing wheel
     pip3 install --no-cache-dir \

esphome/components/bluetooth_proxy/__init__.py

@@ -2,11 +2,13 @@ from esphome.components import esp32_ble_tracker, esp32_ble_client
 import esphome.config_validation as cv
 import esphome.codegen as cg
 from esphome.const import CONF_ACTIVE, CONF_ID
+from esphome.components.esp32 import add_idf_sdkconfig_option
 
 AUTO_LOAD = ["esp32_ble_client", "esp32_ble_tracker"]
 DEPENDENCIES = ["api", "esp32"]
 CODEOWNERS = ["@jesserockz"]
 
+CONF_CACHE_SERVICES = "cache_services"
 CONF_CONNECTIONS = "connections"
 MAX_CONNECTIONS = 3
 
@@ -47,6 +49,9 @@ CONFIG_SCHEMA = cv.All(
         {
             cv.GenerateID(): cv.declare_id(BluetoothProxy),
             cv.Optional(CONF_ACTIVE, default=False): cv.boolean,
+            cv.SplitDefault(CONF_CACHE_SERVICES, esp32_idf=True): cv.All(
+                cv.only_with_esp_idf, cv.boolean
+            ),
             cv.Optional(CONF_CONNECTIONS): cv.All(
                 cv.ensure_list(CONNECTION_SCHEMA),
                 cv.Length(min=1, max=MAX_CONNECTIONS),
@@ -72,4 +77,7 @@ async def to_code(config):
         cg.add(var.register_connection(connection_var))
         await esp32_ble_tracker.register_client(connection_var, connection_conf)
 
+    if config.get(CONF_CACHE_SERVICES):
+        add_idf_sdkconfig_option("CONFIG_BT_GATTC_CACHE_NVS_FLASH", True)
+
     cg.add_define("USE_BLUETOOTH_PROXY")

esphome/components/cd74hc4067/__init__.py

@@ -27,10 +27,10 @@ DEFAULT_DELAY = "2ms"
 CONFIG_SCHEMA = cv.Schema(
     {
         cv.GenerateID(): cv.declare_id(CD74HC4067Component),
-        cv.Required(CONF_PIN_S0): pins.internal_gpio_output_pin_schema,
-        cv.Required(CONF_PIN_S1): pins.internal_gpio_output_pin_schema,
-        cv.Required(CONF_PIN_S2): pins.internal_gpio_output_pin_schema,
-        cv.Required(CONF_PIN_S3): pins.internal_gpio_output_pin_schema,
+        cv.Required(CONF_PIN_S0): pins.gpio_output_pin_schema,
+        cv.Required(CONF_PIN_S1): pins.gpio_output_pin_schema,
+        cv.Required(CONF_PIN_S2): pins.gpio_output_pin_schema,
+        cv.Required(CONF_PIN_S3): pins.gpio_output_pin_schema,
         cv.Optional(
             CONF_DELAY, default=DEFAULT_DELAY
         ): cv.positive_time_period_milliseconds,

esphome/components/cd74hc4067/cd74hc4067.h

@@ -19,22 +19,22 @@ class CD74HC4067Component : public Component {
   void activate_pin(uint8_t pin);
 
   /// set the pin connected to multiplexer control pin 0
-  void set_pin_s0(InternalGPIOPin *pin) { this->pin_s0_ = pin; }
+  void set_pin_s0(GPIOPin *pin) { this->pin_s0_ = pin; }
   /// set the pin connected to multiplexer control pin 1
-  void set_pin_s1(InternalGPIOPin *pin) { this->pin_s1_ = pin; }
+  void set_pin_s1(GPIOPin *pin) { this->pin_s1_ = pin; }
   /// set the pin connected to multiplexer control pin 2
-  void set_pin_s2(InternalGPIOPin *pin) { this->pin_s2_ = pin; }
+  void set_pin_s2(GPIOPin *pin) { this->pin_s2_ = pin; }
   /// set the pin connected to multiplexer control pin 3
-  void set_pin_s3(InternalGPIOPin *pin) { this->pin_s3_ = pin; }
+  void set_pin_s3(GPIOPin *pin) { this->pin_s3_ = pin; }
 
   /// set the delay needed after an input switch
   void set_switch_delay(uint32_t switch_delay) { this->switch_delay_ = switch_delay; }
 
  private:
-  InternalGPIOPin *pin_s0_;
-  InternalGPIOPin *pin_s1_;
-  InternalGPIOPin *pin_s2_;
-  InternalGPIOPin *pin_s3_;
+  GPIOPin *pin_s0_;
+  GPIOPin *pin_s1_;
+  GPIOPin *pin_s2_;
+  GPIOPin *pin_s3_;
   /// the currently active pin
   uint8_t active_pin_;
   uint32_t switch_delay_;

esphome/components/esp32/__init__.py

@@ -398,11 +398,11 @@ spiffs,   data, spiffs,  0x391000, 0x00F000
 
 IDF_PARTITIONS_CSV = """\
 # Name,   Type, SubType, Offset,   Size, Flags
-nvs,      data, nvs,     ,        0x4000,
 otadata,  data, ota,     ,        0x2000,
 phy_init, data, phy,     ,        0x1000,
 app0,     app,  ota_0,   ,      0x1C0000,
 app1,     app,  ota_1,   ,      0x1C0000,
+nvs,      data, nvs,     ,       0x6d000,
 """
 
 

esphome/components/esp32_ble/__init__.py

@@ -2,12 +2,14 @@ import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import CONF_ID
 from esphome.core import CORE
-from esphome.components.esp32 import add_idf_sdkconfig_option
+from esphome.components.esp32 import add_idf_sdkconfig_option, get_esp32_variant, const
 
 DEPENDENCIES = ["esp32"]
 CODEOWNERS = ["@jesserockz"]
 CONFLICTS_WITH = ["esp32_ble_tracker", "esp32_ble_beacon"]
 
+NO_BLUTOOTH_VARIANTS = [const.VARIANT_ESP32S2]
+
 esp32_ble_ns = cg.esphome_ns.namespace("esp32_ble")
 ESP32BLE = esp32_ble_ns.class_("ESP32BLE", cg.Component)
 
@@ -19,6 +21,15 @@ CONFIG_SCHEMA = cv.Schema(
 ).extend(cv.COMPONENT_SCHEMA)
 
 
+def validate_variant(_):
+    variant = get_esp32_variant()
+    if variant in NO_BLUTOOTH_VARIANTS:
+        raise cv.Invalid(f"{variant} does not support Bluetooth")
+
+
+FINAL_VALIDATE_SCHEMA = validate_variant
+
+
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/esp32_ble_beacon/__init__.py

@@ -3,6 +3,7 @@ import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_TYPE, CONF_UUID, CONF_TX_POWER
 from esphome.core import CORE, TimePeriod
 from esphome.components.esp32 import add_idf_sdkconfig_option
+from esphome.components import esp32_ble
 
 DEPENDENCIES = ["esp32"]
 CONFLICTS_WITH = ["esp32_ble_tracker"]
@@ -54,6 +55,8 @@ CONFIG_SCHEMA = cv.All(
     validate_config,
 )
 
+FINAL_VALIDATE_SCHEMA = esp32_ble.validate_variant
+
 
 async def to_code(config):
     uuid = config[CONF_UUID].hex

esphome/components/esp32_ble_client/ble_client_base.cpp

@@ -95,7 +95,9 @@ void BLEClientBase::release_services() {
   for (auto &svc : this->services_)
     delete svc;  // NOLINT(cppcoreguidelines-owning-memory)
   this->services_.clear();
+#ifndef CONFIG_BT_GATTC_CACHE_NVS_FLASH
   esp_ble_gattc_cache_clean(this->remote_bda_);
+#endif
 }
 
 bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t esp_gattc_if,
@@ -288,14 +290,17 @@ float BLEClientBase::parse_char_value(uint8_t *value, uint16_t length) {
       if (length > 2) {
         return (float) encode_uint16(value[1], value[2]);
       }
+      // fall through
     case 0x7:  // uint24.
       if (length > 3) {
         return (float) encode_uint24(value[1], value[2], value[3]);
       }
+      // fall through
     case 0x8:  // uint32.
       if (length > 4) {
         return (float) encode_uint32(value[1], value[2], value[3], value[4]);
       }
+      // fall through
     case 0xC:  // int8.
       return (float) ((int8_t) value[1]);
     case 0xD:  // int12.
@@ -303,10 +308,12 @@ float BLEClientBase::parse_char_value(uint8_t *value, uint16_t length) {
       if (length > 2) {
         return (float) ((int16_t)(value[1] << 8) + (int16_t) value[2]);
       }
+      // fall through
     case 0xF:  // int24.
       if (length > 3) {
         return (float) ((int32_t)(value[1] << 16) + (int32_t)(value[2] << 8) + (int32_t)(value[3]));
       }
+      // fall through
     case 0x10:  // int32.
       if (length > 4) {
         return (float) ((int32_t)(value[1] << 24) + (int32_t)(value[2] << 16) + (int32_t)(value[3] << 8) +

esphome/components/esp32_ble_tracker/__init__.py

@@ -17,6 +17,7 @@ from esphome.const import (
 )
 from esphome.core import CORE
 from esphome.components.esp32 import add_idf_sdkconfig_option
+from esphome.components import esp32_ble
 
 DEPENDENCIES = ["esp32"]
 
@@ -187,6 +188,8 @@ CONFIG_SCHEMA = cv.Schema(
     }
 ).extend(cv.COMPONENT_SCHEMA)
 
+FINAL_VALIDATE_SCHEMA = esp32_ble.validate_variant
+
 ESP_BLE_DEVICE_SCHEMA = cv.Schema(
     {
         cv.GenerateID(CONF_ESP32_BLE_ID): cv.use_id(ESP32BLETracker),

esphome/components/esp32_ble_tracker/esp32_ble_tracker.cpp

@@ -705,8 +705,13 @@ void ESPBTDevice::parse_adv_(const esp_ble_gap_cb_param_t::ble_scan_result_evt_p
 
   while (offset + 2 < len) {
     const uint8_t field_length = payload[offset++];  // First byte is length of adv record
-    if (field_length == 0)
+    if (field_length == 0) {
+      if (offset < param.adv_data_len && param.scan_rsp_len > 0) {  // Zero padded advertisement data
+        offset = param.adv_data_len;
+        continue;
+      }
       break;
+    }
 
     // first byte of adv record is adv record type
     const uint8_t record_type = payload[offset++];

esphome/components/esp32_camera/esp32_camera.cpp

@@ -54,7 +54,11 @@ void ESP32Camera::dump_config() {
   ESP_LOGCONFIG(TAG, "  HREF Pin: %d", conf.pin_href);
   ESP_LOGCONFIG(TAG, "  Pixel Clock Pin: %d", conf.pin_pclk);
   ESP_LOGCONFIG(TAG, "  External Clock: Pin:%d Frequency:%u", conf.pin_xclk, conf.xclk_freq_hz);
+#ifdef USE_ESP_IDF  // Temporary until the espressif/esp32-camera library is updated
+  ESP_LOGCONFIG(TAG, "  I2C Pins: SDA:%d SCL:%d", conf.pin_sscb_sda, conf.pin_sscb_scl);
+#else
   ESP_LOGCONFIG(TAG, "  I2C Pins: SDA:%d SCL:%d", conf.pin_sccb_sda, conf.pin_sccb_scl);
+#endif
   ESP_LOGCONFIG(TAG, "  Reset Pin: %d", conf.pin_reset);
   switch (this->config_.frame_size) {
     case FRAMESIZE_QQVGA:
@@ -209,8 +213,13 @@ void ESP32Camera::set_external_clock(uint8_t pin, uint32_t frequency) {
   this->config_.xclk_freq_hz = frequency;
 }
 void ESP32Camera::set_i2c_pins(uint8_t sda, uint8_t scl) {
+#ifdef USE_ESP_IDF  // Temporary until the espressif/esp32-camera library is updated
+  this->config_.pin_sscb_sda = sda;
+  this->config_.pin_sscb_scl = scl;
+#else
   this->config_.pin_sccb_sda = sda;
   this->config_.pin_sccb_scl = scl;
+#endif
 }
 void ESP32Camera::set_reset_pin(uint8_t pin) { this->config_.pin_reset = pin; }
 void ESP32Camera::set_power_down_pin(uint8_t pin) { this->config_.pin_pwdn = pin; }

esphome/components/i2s_audio/i2s_audio_media_player.cpp

@@ -103,9 +103,11 @@ void I2SAudioMediaPlayer::stop_() {
 
 void I2SAudioMediaPlayer::setup() {
   ESP_LOGCONFIG(TAG, "Setting up Audio...");
+#if SOC_I2S_SUPPORTS_DAC
   if (this->internal_dac_mode_ != I2S_DAC_CHANNEL_DISABLE) {
     this->audio_ = make_unique<Audio>(true, this->internal_dac_mode_);
   } else {
+#endif
     this->audio_ = make_unique<Audio>(false);
     this->audio_->setPinout(this->bclk_pin_, this->lrclk_pin_, this->dout_pin_);
     this->audio_->forceMono(this->external_dac_channels_ == 1);
@@ -113,7 +115,9 @@ void I2SAudioMediaPlayer::setup() {
       this->mute_pin_->setup();
       this->mute_pin_->digital_write(false);
     }
+#if SOC_I2S_SUPPORTS_DAC
   }
+#endif
   this->state = media_player::MEDIA_PLAYER_STATE_IDLE;
 }
 
@@ -137,6 +141,7 @@ void I2SAudioMediaPlayer::dump_config() {
     ESP_LOGCONFIG(TAG, "Audio failed to initialize!");
     return;
   }
+#if SOC_I2S_SUPPORTS_DAC
   if (this->internal_dac_mode_ != I2S_DAC_CHANNEL_DISABLE) {
     switch (this->internal_dac_mode_) {
       case I2S_DAC_CHANNEL_LEFT_EN:
@@ -152,6 +157,7 @@ void I2SAudioMediaPlayer::dump_config() {
         break;
     }
   }
+#endif
 }
 
 }  // namespace i2s_audio

esphome/components/i2s_audio/i2s_audio_media_player.h

@@ -25,7 +25,9 @@ class I2SAudioMediaPlayer : public Component, public media_player::MediaPlayer {
   void set_bclk_pin(uint8_t pin) { this->bclk_pin_ = pin; }
   void set_lrclk_pin(uint8_t pin) { this->lrclk_pin_ = pin; }
   void set_mute_pin(GPIOPin *mute_pin) { this->mute_pin_ = mute_pin; }
+#if SOC_I2S_SUPPORTS_DAC
   void set_internal_dac_mode(i2s_dac_mode_t mode) { this->internal_dac_mode_ = mode; }
+#endif
   void set_external_dac_channels(uint8_t channels) { this->external_dac_channels_ = channels; }
 
   media_player::MediaPlayerTraits get_traits() override;
@@ -51,7 +53,9 @@ class I2SAudioMediaPlayer : public Component, public media_player::MediaPlayer {
   bool muted_{false};
   float unmuted_volume_{0};
 
+#if SOC_I2S_SUPPORTS_DAC
   i2s_dac_mode_t internal_dac_mode_{I2S_DAC_CHANNEL_DISABLE};
+#endif
   uint8_t external_dac_channels_;
 
   HighFrequencyLoopRequester high_freq_;

esphome/components/i2s_audio/media_player.py

@@ -1,5 +1,5 @@
 import esphome.codegen as cg
-from esphome.components import media_player
+from esphome.components import media_player, esp32
 import esphome.config_validation as cv
 
 from esphome import pins
@@ -33,6 +33,18 @@ INTERNAL_DAC_OPTIONS = {
 
 EXTERNAL_DAC_OPTIONS = ["mono", "stereo"]
 
+NO_INTERNAL_DAC_VARIANTS = [esp32.const.VARIANT_ESP32S2]
+
+
+def validate_esp32_variant(config):
+    if config[CONF_DAC_TYPE] != "internal":
+        return config
+    variant = esp32.get_esp32_variant()
+    if variant in NO_INTERNAL_DAC_VARIANTS:
+        raise cv.Invalid(f"{variant} does not have an internal DAC")
+    return config
+
+
 CONFIG_SCHEMA = cv.All(
     cv.typed_schema(
         {
@@ -68,6 +80,7 @@ CONFIG_SCHEMA = cv.All(
         key=CONF_DAC_TYPE,
     ),
     cv.only_with_arduino,
+    validate_esp32_variant,
 )
 
 

esphome/components/modbus/modbus.cpp

@@ -47,7 +47,7 @@ bool Modbus::parse_modbus_byte_(uint8_t byte) {
   uint8_t function_code = raw[1];
   // Byte 2: Size (with modbus rtu function code 4/3)
   // See also https://en.wikipedia.org/wiki/Modbus
-  if (at == 2)
+  if (at <= 2)
     return true;
 
   uint8_t data_len = raw[2];

esphome/components/ota/ota_backend_esp_idf.cpp

@@ -1,6 +1,8 @@
 #include "esphome/core/defines.h"
 #ifdef USE_ESP_IDF
 
+#include <esp_task_wdt.h>
+
 #include "ota_backend_esp_idf.h"
 #include "ota_component.h"
 #include <esp_ota_ops.h>
@@ -14,7 +16,9 @@ OTAResponseTypes IDFOTABackend::begin(size_t image_size) {
   if (this->partition_ == nullptr) {
     return OTA_RESPONSE_ERROR_NO_UPDATE_PARTITION;
   }
+  esp_task_wdt_init(15, false);  // The following function takes longer than the 5 seconds timeout of WDT
   esp_err_t err = esp_ota_begin(this->partition_, image_size, &this->update_handle_);
+  esp_task_wdt_init(CONFIG_ESP_TASK_WDT_TIMEOUT_S, false);  // Set the WDT back to the configured timeout
   if (err != ESP_OK) {
     esp_ota_abort(this->update_handle_);
     this->update_handle_ = 0;

esphome/components/slow_pwm/slow_pwm_output.cpp

@@ -70,7 +70,7 @@ void SlowPWMOutput::dump_config() {
 void SlowPWMOutput::write_state(float state) {
   this->state_ = state;
   if (this->restart_cycle_on_state_change_)
-    this->period_start_time_ = millis();
+    this->restart_cycle();
 }
 
 }  // namespace slow_pwm

esphome/components/slow_pwm/slow_pwm_output.h

@@ -14,6 +14,7 @@ class SlowPWMOutput : public output::FloatOutput, public Component {
   void set_restart_cycle_on_state_change(bool restart_cycle_on_state_change) {
     restart_cycle_on_state_change_ = restart_cycle_on_state_change;
   }
+  void restart_cycle() { this->period_start_time_ = millis(); }
 
   /// Initialize pin
   void setup() override;

esphome/components/toshiba/toshiba.cpp

@@ -124,9 +124,6 @@ void ToshibaClimate::setup() {
   // Set supported modes & temperatures based on model
   this->minimum_temperature_ = this->temperature_min_();
   this->maximum_temperature_ = this->temperature_max_();
-  this->supports_dry_ = this->toshiba_supports_dry_();
-  this->supports_fan_only_ = this->toshiba_supports_fan_only_();
-  this->fan_modes_ = this->toshiba_fan_modes_();
   this->swing_modes_ = this->toshiba_swing_modes_();
   // Never send nan to HA
   if (std::isnan(this->target_temperature))
@@ -178,12 +175,39 @@ void ToshibaClimate::transmit_generic_() {
       mode = TOSHIBA_MODE_COOL;
       break;
 
+    case climate::CLIMATE_MODE_DRY:
+      mode = TOSHIBA_MODE_DRY;
+      break;
+
+    case climate::CLIMATE_MODE_FAN_ONLY:
+      mode = TOSHIBA_MODE_FAN_ONLY;
+      break;
+
     case climate::CLIMATE_MODE_HEAT_COOL:
     default:
       mode = TOSHIBA_MODE_AUTO;
   }
 
-  message[6] |= mode | TOSHIBA_FAN_SPEED_AUTO;
+  uint8_t fan;
+  switch (this->fan_mode.value()) {
+    case climate::CLIMATE_FAN_LOW:
+      fan = TOSHIBA_FAN_SPEED_1;
+      break;
+
+    case climate::CLIMATE_FAN_MEDIUM:
+      fan = TOSHIBA_FAN_SPEED_3;
+      break;
+
+    case climate::CLIMATE_FAN_HIGH:
+      fan = TOSHIBA_FAN_SPEED_5;
+      break;
+
+    case climate::CLIMATE_FAN_AUTO:
+    default:
+      fan = TOSHIBA_FAN_SPEED_AUTO;
+      break;
+  }
+  message[6] = fan | mode;
 
   // Zero
   message[7] = 0x00;

esphome/components/toshiba/toshiba.h

@@ -22,7 +22,10 @@ const float TOSHIBA_RAC_PT1411HWRU_TEMP_F_MAX = 86.0;
 
 class ToshibaClimate : public climate_ir::ClimateIR {
  public:
-  ToshibaClimate() : climate_ir::ClimateIR(TOSHIBA_GENERIC_TEMP_C_MIN, TOSHIBA_GENERIC_TEMP_C_MAX, 1.0f) {}
+  ToshibaClimate()
+      : climate_ir::ClimateIR(TOSHIBA_GENERIC_TEMP_C_MIN, TOSHIBA_GENERIC_TEMP_C_MAX, 1.0f, true, true,
+                              {climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW, climate::CLIMATE_FAN_MEDIUM,
+                               climate::CLIMATE_FAN_HIGH}) {}
 
   void setup() override;
   void set_model(Model model) { this->model_ = model; }
@@ -46,18 +49,6 @@ class ToshibaClimate : public climate_ir::ClimateIR {
   float temperature_max_() {
     return (this->model_ == MODEL_GENERIC) ? TOSHIBA_GENERIC_TEMP_C_MAX : TOSHIBA_RAC_PT1411HWRU_TEMP_C_MAX;
   }
-  bool toshiba_supports_dry_() {
-    return ((this->model_ == MODEL_RAC_PT1411HWRU_C) || (this->model_ == MODEL_RAC_PT1411HWRU_F));
-  }
-  bool toshiba_supports_fan_only_() {
-    return ((this->model_ == MODEL_RAC_PT1411HWRU_C) || (this->model_ == MODEL_RAC_PT1411HWRU_F));
-  }
-  std::set<climate::ClimateFanMode> toshiba_fan_modes_() {
-    return (this->model_ == MODEL_GENERIC)
-               ? std::set<climate::ClimateFanMode>{}
-               : std::set<climate::ClimateFanMode>{climate::CLIMATE_FAN_AUTO, climate::CLIMATE_FAN_LOW,
-                                                   climate::CLIMATE_FAN_MEDIUM, climate::CLIMATE_FAN_HIGH};
-  }
   std::set<climate::ClimateSwingMode> toshiba_swing_modes_() {
     return (this->model_ == MODEL_GENERIC)
                ? std::set<climate::ClimateSwingMode>{}

esphome/const.py

@@ -1,6 +1,6 @@
 """Constants used by esphome."""
 
-__version__ = "2022.12.0-dev"
+__version__ = "2023.1.0-dev"
 
 ALLOWED_NAME_CHARS = "abcdefghijklmnopqrstuvwxyz0123456789-_"
 

requirements.txt

@@ -9,7 +9,7 @@ pyserial==3.5
 platformio==6.1.5  # When updating platformio, also update Dockerfile
 esptool==4.4
 click==8.1.3
-esphome-dashboard==20221207.0
+esphome-dashboard==20221213.0
 aioesphomeapi==13.0.1
 zeroconf==0.39.4