[CI] Consolidate some tests (H) (#8198)

tests/components/havells_solar/common.yaml

@@ -0,0 +1,79 @@
+uart:
+  - id: uart_havells_solar
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 9600
+
+modbus:
+  flow_control_pin: ${flow_control_pin}
+
+sensor:
+  - platform: havells_solar
+    update_interval: 60s
+    phase_a:
+      voltage:
+        name: Phase A Voltage
+      current:
+        name: Phase A Current
+    phase_b:
+      voltage:
+        name: Voltage Phase B
+      current:
+        name: Current Phase B
+    phase_c:
+      voltage:
+        name: Voltage Phase C
+      current:
+        name: Current Phase C
+    pv1:
+      voltage:
+        name: PV1 Voltage
+      current:
+        name: PV1 Current
+      active_power:
+        name: PV1 Active Power
+      voltage_sampled_by_secondary_cpu:
+        name: PV1 Voltage Sampled By Secondary CPU
+      insulation_of_p_to_ground:
+        name: PV1 Insulation Of +VE To Ground
+    pv2:
+      voltage:
+        name: PV2 Voltage
+      current:
+        name: PV2 Current
+      active_power:
+        name: PV2 Active Power
+      voltage_sampled_by_secondary_cpu:
+        name: PV2 Voltage Sampled By Secondary CPU
+      insulation_of_p_to_ground:
+        name: PV2 Insulation Of +VE To Ground
+    active_power:
+      name: Active Power
+    reactive_power:
+      name: Reactive Power
+    frequency:
+      name: Frequency
+    energy_production_day:
+      name: Today's Generation
+    total_energy_production:
+      name: Total Energy Production
+    total_generation_time:
+      name: Total Generation Time
+    today_generation_time:
+      name: Today Generation Time
+    inverter_module_temp:
+      name: Inverter Module Temp
+    inverter_inner_temp:
+      name: Inverter Inner Temp
+    inverter_bus_voltage:
+      name: Inverter BUS Voltage
+    insulation_of_pv_n_to_ground:
+      name: Insulation Of PV- To Ground
+    gfci_value:
+      name: GFCI Value
+    dci_of_r:
+      name: DCI Of R
+    dci_of_s:
+      name: DCI Of S
+    dci_of_t:
+      name: DCI Of T

tests/components/havells_solar/test.esp32-ard.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/havells_solar/test.esp32-c3-ard.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/havells_solar/test.esp32-c3-idf.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/havells_solar/test.esp32-idf.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/havells_solar/test.esp8266-ard.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/havells_solar/test.rp2040-ard.yaml

@@ -1,79 +1,6 @@
-uart:
+substitutions:
-  - id: uart_havells_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: havells_solar
-    update_interval: 60s
-    phase_a:
-      voltage:
-        name: Phase A Voltage
-      current:
-        name: Phase A Current
-    phase_b:
-      voltage:
-        name: Voltage Phase B
-      current:
-        name: Current Phase B
-    phase_c:
-      voltage:
-        name: Voltage Phase C
-      current:
-        name: Current Phase C
-    pv1:
-      voltage:
-        name: PV1 Voltage
-      current:
-        name: PV1 Current
-      active_power:
-        name: PV1 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV1 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV1 Insulation Of +VE To Ground
-    pv2:
-      voltage:
-        name: PV2 Voltage
-      current:
-        name: PV2 Current
-      active_power:
-        name: PV2 Active Power
-      voltage_sampled_by_secondary_cpu:
-        name: PV2 Voltage Sampled By Secondary CPU
-      insulation_of_p_to_ground:
-        name: PV2 Insulation Of +VE To Ground
-    active_power:
-      name: Active Power
-    reactive_power:
-      name: Reactive Power
-    frequency:
-      name: Frequency
-    energy_production_day:
-      name: Today's Generation
-    total_energy_production:
-      name: Total Energy Production
-    total_generation_time:
-      name: Total Generation Time
-    today_generation_time:
-      name: Today Generation Time
-    inverter_module_temp:
-      name: Inverter Module Temp
-    inverter_inner_temp:
-      name: Inverter Inner Temp
-    inverter_bus_voltage:
-      name: Inverter BUS Voltage
-    insulation_of_pv_n_to_ground:
-      name: Insulation Of PV- To Ground
-    gfci_value:
-      name: GFCI Value
-    dci_of_r:
-      name: DCI Of R
-    dci_of_s:
-      name: DCI Of S
-    dci_of_t:
-      name: DCI Of T

tests/components/hdc1080/common.yaml

@@ -0,0 +1,12 @@
+i2c:
+  - id: i2c_hdc1080
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: hdc1080
+    temperature:
+      name: Temperature
+    humidity:
+      name: Humidity
+    update_interval: 15s

tests/components/hdc1080/test.esp32-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/hdc1080/test.esp32-c3-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/hdc1080/test.esp32-c3-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/hdc1080/test.esp32-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/hdc1080/test.esp8266-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/hdc1080/test.rp2040-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hdc1080
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hdc1080
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/he60r/common.yaml

@@ -0,0 +1,13 @@
+uart:
+  - id: uart_he60r
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: EVEN
+
+cover:
+  - platform: he60r
+    id: garage_door
+    name: Garage Door
+    open_duration: 14s
+    close_duration: 14s

tests/components/he60r/test.esp32-ard.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO17
-    tx_pin: 17
+  rx_pin: GPIO16
-    rx_pin: 16
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/he60r/test.esp32-c3-ard.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/he60r/test.esp32-c3-idf.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/he60r/test.esp32-idf.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO17
-    tx_pin: 17
+  rx_pin: GPIO16
-    rx_pin: 16
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/he60r/test.esp8266-ard.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/he60r/test.rp2040-ard.yaml

@@ -1,13 +1,5 @@
-uart:
+substitutions:
-  - id: uart_he60r
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 1200
-    parity: EVEN
 
-cover:
+<<: !include common.yaml
-  - platform: he60r
-    id: garage_door
-    name: Garage Door
-    open_duration: 14s
-    close_duration: 14s

tests/components/heatpumpir/common.yaml

@@ -0,0 +1,26 @@
+remote_transmitter:
+  pin: ${pin}
+  carrier_duty_percent: 50%
+
+climate:
+  - platform: heatpumpir
+    protocol: mitsubishi_heavy_zm
+    horizontal_default: left
+    vertical_default: up
+    name: HeatpumpIR Climate
+    min_temperature: 18
+    max_temperature: 30
+  - platform: heatpumpir
+    protocol: daikin
+    horizontal_default: mleft
+    vertical_default: mup
+    name: HeatpumpIR Climate
+    min_temperature: 18
+    max_temperature: 30
+  - platform: heatpumpir
+    protocol: panasonic_altdke
+    horizontal_default: mright
+    vertical_default: mdown
+    name: HeatpumpIR Climate
+    min_temperature: 18
+    max_temperature: 30

tests/components/heatpumpir/test.bk72xx-ard.yaml

@@ -1,26 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 6
+  pin: GPIO6
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: heatpumpir
-    protocol: mitsubishi_heavy_zm
-    horizontal_default: left
-    vertical_default: up
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30
-  - platform: heatpumpir
-    protocol: daikin
-    horizontal_default: mleft
-    vertical_default: mup
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30
-  - platform: heatpumpir
-    protocol: panasonic_altdke
-    horizontal_default: mright
-    vertical_default: mdown
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30

tests/components/heatpumpir/test.esp32-ard.yaml

@@ -1,19 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: heatpumpir
-    protocol: mitsubishi_heavy_zm
-    horizontal_default: left
-    vertical_default: up
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30
-  - platform: heatpumpir
-    protocol: greeyt
-    horizontal_default: left
-    vertical_default: up
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30

tests/components/heatpumpir/test.esp32-c3-ard.yaml

@@ -0,0 +1,4 @@
+substitutions:
+  pin: GPIO2
+
+<<: !include common.yaml

tests/components/heatpumpir/test.esp8266-ard.yaml

@@ -1,19 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 5
+  pin: GPIO5
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: heatpumpir
-    protocol: mitsubishi_heavy_zm
-    horizontal_default: left
-    vertical_default: up
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30
-  - platform: heatpumpir
-    protocol: greeyt
-    horizontal_default: left
-    vertical_default: up
-    name: HeatpumpIR Climate
-    min_temperature: 18
-    max_temperature: 30

tests/components/hitachi_ac344/common.yaml

@@ -0,0 +1,7 @@
+remote_transmitter:
+  pin: ${pin}
+  carrier_duty_percent: 50%
+
+climate:
+  - platform: hitachi_ac344
+    name: Hitachi Climate

tests/components/hitachi_ac344/test.bk72xx-ard.yaml

@@ -0,0 +1,4 @@
+substitutions:
+  pin: GPIO6
+
+<<: !include common.yaml

tests/components/hitachi_ac344/test.esp32-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac344
-    name: Hitachi Climate

tests/components/hitachi_ac344/test.esp32-c3-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac344
-    name: Hitachi Climate

tests/components/hitachi_ac344/test.esp32-c3-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac344
-    name: Hitachi Climate

tests/components/hitachi_ac344/test.esp32-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac344
-    name: Hitachi Climate

tests/components/hitachi_ac344/test.esp8266-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 5
+  pin: GPIO5
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac344
-    name: Hitachi Climate

tests/components/hitachi_ac424/common.yaml

@@ -0,0 +1,7 @@
+remote_transmitter:
+  pin: ${pin}
+  carrier_duty_percent: 50%
+
+climate:
+  - platform: hitachi_ac424
+    name: Hitachi Climate

tests/components/hitachi_ac424/test.bk72xx-ard.yaml

@@ -0,0 +1,4 @@
+substitutions:
+  pin: GPIO6
+
+<<: !include common.yaml

tests/components/hitachi_ac424/test.esp32-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac424
-    name: Hitachi Climate

tests/components/hitachi_ac424/test.esp32-c3-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac424
-    name: Hitachi Climate

tests/components/hitachi_ac424/test.esp32-c3-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac424
-    name: Hitachi Climate

tests/components/hitachi_ac424/test.esp32-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac424
-    name: Hitachi Climate

tests/components/hitachi_ac424/test.esp8266-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 5
+  pin: GPIO5
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: hitachi_ac424
-    name: Hitachi Climate

tests/components/hlw8012/common.yaml

@@ -0,0 +1,21 @@
+sensor:
+  - platform: hlw8012
+    model: hlw8012
+    sel_pin: ${sel_pin}
+    cf_pin: ${cf_pin}
+    cf1_pin: ${cf1_pin}
+    current:
+      name: HLW8012 Current
+    voltage:
+      name: HLW8012 Voltage
+    power:
+      name: HLW8012 Power
+      id: hlw8012_power
+    energy:
+      name: HLW8012 Energy
+      id: hlw8012_energy
+    update_interval: 15s
+    current_resistor: 0.001 ohm
+    voltage_divider: 2351
+    change_mode_every: "never"
+    initial_mode: VOLTAGE

tests/components/hlw8012/test.esp32-ard.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO12
-    model: hlw8012
+  cf_pin: GPIO13
-    sel_pin: 12
+  cf1_pin: GPIO14
-    cf_pin: 14
+
-    cf1_pin: 13
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hlw8012/test.esp32-c3-ard.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO2
-    model: hlw8012
+  cf_pin: GPIO3
-    sel_pin: 2
+  cf1_pin: GPIO4
-    cf_pin: 4
+
-    cf1_pin: 3
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hlw8012/test.esp32-c3-idf.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO2
-    model: hlw8012
+  cf_pin: GPIO3
-    sel_pin: 2
+  cf1_pin: GPIO4
-    cf_pin: 4
+
-    cf1_pin: 3
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hlw8012/test.esp32-idf.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO12
-    model: hlw8012
+  cf_pin: GPIO13
-    sel_pin: 12
+  cf1_pin: GPIO14
-    cf_pin: 14
+
-    cf1_pin: 13
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hlw8012/test.esp8266-ard.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO12
-    model: hlw8012
+  cf_pin: GPIO13
-    sel_pin: 12
+  cf1_pin: GPIO14
-    cf_pin: 14
+
-    cf1_pin: 13
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hlw8012/test.rp2040-ard.yaml

@@ -1,21 +1,6 @@
-sensor:
+substitutions:
-  - platform: hlw8012
+  sel_pin: GPIO2
-    model: hlw8012
+  cf_pin: GPIO3
-    sel_pin: 2
+  cf1_pin: GPIO4
-    cf_pin: 4
+
-    cf1_pin: 3
+<<: !include common.yaml
-    current:
-      name: HLW8012 Current
-    voltage:
-      name: HLW8012 Voltage
-    power:
-      name: HLW8012 Power
-      id: hlw8012_power
-    energy:
-      name: HLW8012 Energy
-      id: hlw8012_energy
-    update_interval: 15s
-    current_resistor: 0.001 ohm
-    voltage_divider: 2351
-    change_mode_every: "never"
-    initial_mode: VOLTAGE

tests/components/hm3301/common.yaml

@@ -0,0 +1,16 @@
+i2c:
+  - id: i2c_hm3301
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: hm3301
+    pm_1_0:
+      name: PM1.0
+    pm_2_5:
+      name: PM2.5
+    pm_10_0:
+      name: PM10.0
+    aqi:
+      name: AQI
+      calculation_type: CAQI

tests/components/hm3301/test.esp32-ard.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hm3301/test.esp32-c3-ard.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hm3301/test.esp32-c3-idf.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hm3301/test.esp32-idf.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hm3301/test.esp8266-ard.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hm3301/test.rp2040-ard.yaml

@@ -1,16 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hm3301
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hm3301
-    pm_1_0:
-      name: PM1.0
-    pm_2_5:
-      name: PM2.5
-    pm_10_0:
-      name: PM10.0
-    aqi:
-      name: AQI
-      calculation_type: CAQI

tests/components/hmc5883l/common.yaml

@@ -0,0 +1,19 @@
+i2c:
+  - id: i2c_hmc5883l
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: hmc5883l
+    address: 0x68
+    field_strength_x:
+      name: HMC5883L Field Strength X
+    field_strength_y:
+      name: HMC5883L Field Strength Y
+    field_strength_z:
+      name: HMC5883L Field Strength Z
+    heading:
+      name: HMC5883L Heading
+    range: 130uT
+    oversampling: 8x
+    update_interval: 15s

tests/components/hmc5883l/test.esp32-ard.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/hmc5883l/test.esp32-c3-ard.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/hmc5883l/test.esp32-c3-idf.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/hmc5883l/test.esp32-idf.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/hmc5883l/test.esp8266-ard.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/hmc5883l/test.rp2040-ard.yaml

@@ -1,19 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hmc5883l
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hmc5883l
-    address: 0x68
-    field_strength_x:
-      name: HMC5883L Field Strength X
-    field_strength_y:
-      name: HMC5883L Field Strength Y
-    field_strength_z:
-      name: HMC5883L Field Strength Z
-    heading:
-      name: HMC5883L Heading
-    range: 130uT
-    oversampling: 8x
-    update_interval: 15s

tests/components/honeywell_hih_i2c/common.yaml

@@ -0,0 +1,12 @@
+i2c:
+  - id: i2c_honeywell_hih
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: honeywell_hih_i2c
+    temperature:
+      name: Temperature
+    humidity:
+      name: Humidity
+    update_interval: 15s

tests/components/honeywell_hih_i2c/test.esp32-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywell_hih_i2c/test.esp32-c3-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywell_hih_i2c/test.esp32-c3-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywell_hih_i2c/test.esp32-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywell_hih_i2c/test.esp8266-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywell_hih_i2c/test.rp2040-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywell_hih
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywell_hih_i2c
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    update_interval: 15s

tests/components/honeywellabp/common.yaml

@@ -0,0 +1,15 @@
+spi:
+  - id: spi_bme280
+    clk_pin: ${clk_pin}
+    mosi_pin: ${mosi_pin}
+    miso_pin: ${miso_pin}
+
+sensor:
+  - platform: honeywellabp
+    cs_pin: ${cs_pin}
+    pressure:
+      name: Honeywell pressure
+      min_pressure: 0
+      max_pressure: 15
+    temperature:
+      name: Honeywell temperature

tests/components/honeywellabp/test.esp32-ard.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_bme280
+  clk_pin: GPIO16
-    clk_pin: 16
+  mosi_pin: GPIO17
-    mosi_pin: 17
+  miso_pin: GPIO15
-    miso_pin: 15
+  cs_pin: GPIO5
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 12
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp/test.esp32-c3-ard.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_honeywellabp
+  clk_pin: GPIO6
-    clk_pin: 6
+  mosi_pin: GPIO7
-    mosi_pin: 7
+  miso_pin: GPIO5
-    miso_pin: 5
+  cs_pin: GPIO8
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 8
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp/test.esp32-c3-idf.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_honeywellabp
+  clk_pin: GPIO6
-    clk_pin: 6
+  mosi_pin: GPIO7
-    mosi_pin: 7
+  miso_pin: GPIO5
-    miso_pin: 5
+  cs_pin: GPIO8
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 8
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp/test.esp32-idf.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_bme280
+  clk_pin: GPIO16
-    clk_pin: 16
+  mosi_pin: GPIO17
-    mosi_pin: 17
+  miso_pin: GPIO15
-    miso_pin: 15
+  cs_pin: GPIO5
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 12
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp/test.esp8266-ard.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_bme280
+  clk_pin: GPIO14
-    clk_pin: 14
+  mosi_pin: GPIO13
-    mosi_pin: 13
+  miso_pin: GPIO12
-    miso_pin: 12
+  cs_pin: GPIO15
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 15
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp/test.rp2040-ard.yaml

@@ -1,15 +1,7 @@
-spi:
+substitutions:
-  - id: spi_bme280
+  clk_pin: GPIO2
-    clk_pin: 2
+  mosi_pin: GPIO3
-    mosi_pin: 3
+  miso_pin: GPIO4
-    miso_pin: 4
+  cs_pin: GPIO5
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp
-    cs_pin: 6
-    pressure:
-      name: Honeywell pressure
-      min_pressure: 0
-      max_pressure: 15
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/common.yaml

@@ -0,0 +1,15 @@
+i2c:
+  - id: i2c_honeywellabp2
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: honeywellabp2_i2c
+    address: 0x28
+    pressure:
+      name: Honeywell2 pressure
+      min_pressure: 0
+      max_pressure: 16000
+      transfer_function: A
+    temperature:
+      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.esp32-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.esp32-c3-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.esp32-c3-idf.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.esp32-idf.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.esp8266-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/honeywellabp2_i2c/test.rp2040-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_honeywellabp2
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: honeywellabp2_i2c
-    address: 0x28
-    pressure:
-      name: Honeywell2 pressure
-      min_pressure: 0
-      max_pressure: 16000
-      transfer_function: A
-    temperature:
-      name: Honeywell temperature

tests/components/hrxl_maxsonar_wr/common.yaml

@@ -0,0 +1,10 @@
+uart:
+  - id: uart_hrxl_maxsonar_wr
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 115200
+
+sensor:
+  - platform: hrxl_maxsonar_wr
+    id: hrxl_maxsonar_wr_sensor
+    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.esp32-ard.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.esp32-c3-ard.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.esp32-c3-idf.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.esp32-idf.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.esp8266-ard.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hrxl_maxsonar_wr/test.rp2040-ard.yaml

@@ -1,10 +1,5 @@
-uart:
+substitutions:
-  - id: uart_hrxl_maxsonar_wr
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 115200
 
-sensor:
+<<: !include common.yaml
-  - platform: hrxl_maxsonar_wr
-    id: hrxl_maxsonar_wr_sensor
-    name: Rainwater Tank Level

tests/components/hte501/common.yaml

@@ -0,0 +1,12 @@
+i2c:
+  - id: i2c_hte501
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: hte501
+    address: 0x40
+    temperature:
+      name: Temperature
+    humidity:
+      name: Humidity

tests/components/hte501/test.esp32-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/hte501/test.esp32-c3-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/hte501/test.esp32-c3-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/hte501/test.esp32-idf.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/hte501/test.esp8266-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/hte501/test.rp2040-ard.yaml

@@ -1,12 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_hte501
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: hte501
-    address: 0x40
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity

tests/components/htu21d/common.yaml

@@ -0,0 +1,15 @@
+i2c:
+  - id: i2c_htu21d
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: htu21d
+    model: htu21d
+    temperature:
+      name: Temperature
+    humidity:
+      name: Humidity
+    heater:
+      name: Heater
+    update_interval: 15s

tests/components/htu21d/test.esp32-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_htu21d
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: htu21d
-    model: htu21d
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    heater:
-      name: Heater
-    update_interval: 15s

tests/components/htu21d/test.esp32-c3-ard.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_htu21d
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: htu21d
-    model: htu21d
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    heater:
-      name: Heater
-    update_interval: 15s

tests/components/htu21d/test.esp32-c3-idf.yaml

@@ -1,15 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_htu21d
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: htu21d
-    model: htu21d
-    temperature:
-      name: Temperature
-    humidity:
-      name: Humidity
-    heater:
-      name: Heater
-    update_interval: 15s