mirror of
https://github.com/esphome/esphome.git
synced 2025-10-31 15:12:06 +00:00
Add driver for quad SPI AMOLED displays (#6354)
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
This commit is contained in:
Clyde Stubbs
GitHub
@@ -269,6 +269,7 @@ esphome/components/pvvx_mithermometer/* @pasiz
|
||||
esphome/components/pylontech/* @functionpointer
|
||||
esphome/components/qmp6988/* @andrewpc
|
||||
esphome/components/qr_code/* @wjtje
|
||||
esphome/components/qspi_amoled/* @clydebarrow
|
||||
esphome/components/qwiic_pir/* @kahrendt
|
||||
esphome/components/radon_eye_ble/* @jeffeb3
|
||||
esphome/components/radon_eye_rd200/* @jeffeb3
|
||||
|
||||
1
esphome/components/qspi_amoled/__init__.py
Normal file
1
esphome/components/qspi_amoled/__init__.py
Normal file
@@ -0,0 +1 @@
|
||||
CODEOWNERS = ["@clydebarrow"]
|
||||
131
esphome/components/qspi_amoled/display.py
Normal file
131
esphome/components/qspi_amoled/display.py
Normal file
@@ -0,0 +1,131 @@
|
||||
import esphome.codegen as cg
|
||||
import esphome.config_validation as cv
|
||||
from esphome import pins
|
||||
from esphome.components import (
|
||||
spi,
|
||||
display,
|
||||
)
|
||||
from esphome.const import (
|
||||
CONF_RESET_PIN,
|
||||
CONF_ID,
|
||||
CONF_DIMENSIONS,
|
||||
CONF_WIDTH,
|
||||
CONF_HEIGHT,
|
||||
CONF_LAMBDA,
|
||||
CONF_BRIGHTNESS,
|
||||
CONF_ENABLE_PIN,
|
||||
CONF_MODEL,
|
||||
CONF_OFFSET_HEIGHT,
|
||||
CONF_OFFSET_WIDTH,
|
||||
CONF_INVERT_COLORS,
|
||||
CONF_MIRROR_X,
|
||||
CONF_MIRROR_Y,
|
||||
CONF_SWAP_XY,
|
||||
CONF_COLOR_ORDER,
|
||||
CONF_TRANSFORM,
|
||||
)
|
||||
|
||||
DEPENDENCIES = ["spi"]
|
||||
|
||||
qspi_amoled_ns = cg.esphome_ns.namespace("qspi_amoled")
|
||||
QSPI_AMOLED = qspi_amoled_ns.class_(
|
||||
"QspiAmoLed", display.Display, display.DisplayBuffer, cg.Component, spi.SPIDevice
|
||||
)
|
||||
ColorOrder = display.display_ns.enum("ColorMode")
|
||||
Model = qspi_amoled_ns.enum("Model")
|
||||
|
||||
MODELS = {"RM690B0": Model.RM690B0, "RM67162": Model.RM67162}
|
||||
|
||||
COLOR_ORDERS = {
|
||||
"RGB": ColorOrder.COLOR_ORDER_RGB,
|
||||
"BGR": ColorOrder.COLOR_ORDER_BGR,
|
||||
}
|
||||
DATA_PIN_SCHEMA = pins.internal_gpio_output_pin_schema
|
||||
|
||||
CONFIG_SCHEMA = cv.All(
|
||||
display.FULL_DISPLAY_SCHEMA.extend(
|
||||
cv.Schema(
|
||||
{
|
||||
cv.GenerateID(): cv.declare_id(QSPI_AMOLED),
|
||||
cv.Required(CONF_MODEL): cv.enum(MODELS, upper=True),
|
||||
cv.Required(CONF_DIMENSIONS): cv.Any(
|
||||
cv.dimensions,
|
||||
cv.Schema(
|
||||
{
|
||||
cv.Required(CONF_WIDTH): cv.int_,
|
||||
cv.Required(CONF_HEIGHT): cv.int_,
|
||||
cv.Optional(CONF_OFFSET_HEIGHT, default=0): cv.int_,
|
||||
cv.Optional(CONF_OFFSET_WIDTH, default=0): cv.int_,
|
||||
}
|
||||
),
|
||||
),
|
||||
cv.Optional(CONF_TRANSFORM): cv.Schema(
|
||||
{
|
||||
cv.Optional(CONF_MIRROR_X, default=False): cv.boolean,
|
||||
cv.Optional(CONF_MIRROR_Y, default=False): cv.boolean,
|
||||
cv.Optional(CONF_SWAP_XY, default=False): cv.boolean,
|
||||
}
|
||||
),
|
||||
cv.Optional(CONF_COLOR_ORDER, default="RGB"): cv.enum(
|
||||
COLOR_ORDERS, upper=True
|
||||
),
|
||||
cv.Optional(CONF_INVERT_COLORS, default=False): cv.boolean,
|
||||
cv.Optional(CONF_RESET_PIN): pins.gpio_output_pin_schema,
|
||||
cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema,
|
||||
cv.Optional(CONF_BRIGHTNESS, default=0xD0): cv.int_range(
|
||||
0, 0xFF, min_included=True, max_included=True
|
||||
),
|
||||
}
|
||||
).extend(
|
||||
spi.spi_device_schema(
|
||||
cs_pin_required=False,
|
||||
default_mode="MODE0",
|
||||
default_data_rate=10e6,
|
||||
quad=True,
|
||||
)
|
||||
)
|
||||
),
|
||||
cv.only_with_esp_idf,
|
||||
)
|
||||
|
||||
|
||||
async def to_code(config):
|
||||
var = cg.new_Pvariable(config[CONF_ID])
|
||||
await display.register_display(var, config)
|
||||
await spi.register_spi_device(var, config)
|
||||
|
||||
cg.add(var.set_color_mode(config[CONF_COLOR_ORDER]))
|
||||
cg.add(var.set_invert_colors(config[CONF_INVERT_COLORS]))
|
||||
cg.add(var.set_brightness(config[CONF_BRIGHTNESS]))
|
||||
cg.add(var.set_model(config[CONF_MODEL]))
|
||||
if enable_pin := config.get(CONF_ENABLE_PIN):
|
||||
enable = await cg.gpio_pin_expression(enable_pin)
|
||||
cg.add(var.set_enable_pin(enable))
|
||||
|
||||
if reset_pin := config.get(CONF_RESET_PIN):
|
||||
reset = await cg.gpio_pin_expression(reset_pin)
|
||||
cg.add(var.set_reset_pin(reset))
|
||||
|
||||
if transform := config.get(CONF_TRANSFORM):
|
||||
cg.add(var.set_mirror_x(transform[CONF_MIRROR_X]))
|
||||
cg.add(var.set_mirror_y(transform[CONF_MIRROR_Y]))
|
||||
cg.add(var.set_swap_xy(transform[CONF_SWAP_XY]))
|
||||
|
||||
if CONF_DIMENSIONS in config:
|
||||
dimensions = config[CONF_DIMENSIONS]
|
||||
if isinstance(dimensions, dict):
|
||||
cg.add(var.set_dimensions(dimensions[CONF_WIDTH], dimensions[CONF_HEIGHT]))
|
||||
cg.add(
|
||||
var.set_offsets(
|
||||
dimensions[CONF_OFFSET_WIDTH], dimensions[CONF_OFFSET_HEIGHT]
|
||||
)
|
||||
)
|
||||
else:
|
||||
(width, height) = dimensions
|
||||
cg.add(var.set_dimensions(width, height))
|
||||
|
||||
if lamb := config.get(CONF_LAMBDA):
|
||||
lambda_ = await cg.process_lambda(
|
||||
lamb, [(display.DisplayRef, "it")], return_type=cg.void
|
||||
)
|
||||
cg.add(var.set_writer(lambda_))
|
||||
165
esphome/components/qspi_amoled/qspi_amoled.cpp
Normal file
165
esphome/components/qspi_amoled/qspi_amoled.cpp
Normal file
@@ -0,0 +1,165 @@
|
||||
#ifdef USE_ESP_IDF
|
||||
#include "qspi_amoled.h"
|
||||
#include "esphome/core/log.h"
|
||||
|
||||
namespace esphome {
|
||||
namespace qspi_amoled {
|
||||
|
||||
void QspiAmoLed::setup() {
|
||||
esph_log_config(TAG, "Setting up QSPI_AMOLED");
|
||||
this->spi_setup();
|
||||
if (this->enable_pin_ != nullptr) {
|
||||
this->enable_pin_->setup();
|
||||
this->enable_pin_->digital_write(true);
|
||||
}
|
||||
if (this->reset_pin_ != nullptr) {
|
||||
this->reset_pin_->setup();
|
||||
this->reset_pin_->digital_write(true);
|
||||
delay(5);
|
||||
this->reset_pin_->digital_write(false);
|
||||
delay(5);
|
||||
this->reset_pin_->digital_write(true);
|
||||
}
|
||||
this->set_timeout(120, [this] { this->write_command_(SLEEP_OUT); });
|
||||
this->set_timeout(240, [this] { this->write_init_sequence_(); });
|
||||
}
|
||||
|
||||
void QspiAmoLed::update() {
|
||||
this->do_update_();
|
||||
int w = this->x_high_ - this->x_low_ + 1;
|
||||
int h = this->y_high_ - this->y_low_ + 1;
|
||||
this->draw_pixels_at(this->x_low_, this->y_low_, w, h, this->buffer_, this->color_mode_, display::COLOR_BITNESS_565,
|
||||
true, this->x_low_, this->y_low_, this->get_width_internal() - w - this->x_low_);
|
||||
// invalidate watermarks
|
||||
this->x_low_ = this->width_;
|
||||
this->y_low_ = this->height_;
|
||||
this->x_high_ = 0;
|
||||
this->y_high_ = 0;
|
||||
}
|
||||
|
||||
void QspiAmoLed::draw_absolute_pixel_internal(int x, int y, Color color) {
|
||||
if (x >= this->get_width_internal() || x < 0 || y >= this->get_height_internal() || y < 0) {
|
||||
return;
|
||||
}
|
||||
if (this->buffer_ == nullptr)
|
||||
this->init_internal_(this->width_ * this->height_ * 2);
|
||||
if (this->is_failed())
|
||||
return;
|
||||
uint32_t pos = (y * this->width_) + x;
|
||||
uint16_t new_color;
|
||||
bool updated = false;
|
||||
pos = pos * 2;
|
||||
new_color = display::ColorUtil::color_to_565(color, display::ColorOrder::COLOR_ORDER_RGB);
|
||||
if (this->buffer_[pos] != (uint8_t) (new_color >> 8)) {
|
||||
this->buffer_[pos] = (uint8_t) (new_color >> 8);
|
||||
updated = true;
|
||||
}
|
||||
pos = pos + 1;
|
||||
new_color = new_color & 0xFF;
|
||||
|
||||
if (this->buffer_[pos] != new_color) {
|
||||
this->buffer_[pos] = new_color;
|
||||
updated = true;
|
||||
}
|
||||
if (updated) {
|
||||
// low and high watermark may speed up drawing from buffer
|
||||
if (x < this->x_low_)
|
||||
this->x_low_ = x;
|
||||
if (y < this->y_low_)
|
||||
this->y_low_ = y;
|
||||
if (x > this->x_high_)
|
||||
this->x_high_ = x;
|
||||
if (y > this->y_high_)
|
||||
this->y_high_ = y;
|
||||
}
|
||||
}
|
||||
|
||||
void QspiAmoLed::reset_params_(bool ready) {
|
||||
if (!ready && !this->is_ready())
|
||||
return;
|
||||
this->write_command_(this->invert_colors_ ? INVERT_ON : INVERT_OFF);
|
||||
// custom x/y transform and color order
|
||||
uint8_t mad = this->color_mode_ == display::COLOR_ORDER_BGR ? MADCTL_BGR : MADCTL_RGB;
|
||||
if (this->swap_xy_)
|
||||
mad |= MADCTL_MV;
|
||||
if (this->mirror_x_)
|
||||
mad |= MADCTL_MX;
|
||||
if (this->mirror_y_)
|
||||
mad |= MADCTL_MY;
|
||||
this->write_command_(MADCTL_CMD, &mad, 1);
|
||||
this->write_command_(BRIGHTNESS, &this->brightness_, 1);
|
||||
}
|
||||
|
||||
void QspiAmoLed::write_init_sequence_() {
|
||||
if (this->model_ == RM690B0) {
|
||||
this->write_command_(PAGESEL, 0x20);
|
||||
this->write_command_(MIPI, 0x0A);
|
||||
this->write_command_(WRAM, 0x80);
|
||||
this->write_command_(SWIRE1, 0x51);
|
||||
this->write_command_(SWIRE2, 0x2E);
|
||||
this->write_command_(PAGESEL, 0x00);
|
||||
this->write_command_(0xC2, 0x00);
|
||||
delay(10);
|
||||
this->write_command_(TEON, 0x00);
|
||||
}
|
||||
this->write_command_(PIXFMT, 0x55);
|
||||
this->write_command_(BRIGHTNESS, 0);
|
||||
this->write_command_(DISPLAY_ON);
|
||||
this->reset_params_(true);
|
||||
this->setup_complete_ = true;
|
||||
esph_log_config(TAG, "QSPI_AMOLED setup complete");
|
||||
}
|
||||
|
||||
void QspiAmoLed::set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) {
|
||||
uint8_t buf[4];
|
||||
x1 += this->offset_x_;
|
||||
x2 += this->offset_x_;
|
||||
y1 += this->offset_y_;
|
||||
y2 += this->offset_y_;
|
||||
put16_be(buf, x1);
|
||||
put16_be(buf + 2, x2);
|
||||
this->write_command_(CASET, buf, sizeof buf);
|
||||
put16_be(buf, y1);
|
||||
put16_be(buf + 2, y2);
|
||||
this->write_command_(RASET, buf, sizeof buf);
|
||||
}
|
||||
|
||||
void QspiAmoLed::draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
|
||||
display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) {
|
||||
if (!this->setup_complete_ || this->is_failed())
|
||||
return;
|
||||
if (w <= 0 || h <= 0)
|
||||
return;
|
||||
if (bitness != display::COLOR_BITNESS_565 || order != this->color_mode_ ||
|
||||
big_endian != (this->bit_order_ == spi::BIT_ORDER_MSB_FIRST)) {
|
||||
return display::Display::draw_pixels_at(x_start, y_start, w, h, ptr, order, bitness, big_endian, x_offset, y_offset,
|
||||
x_pad);
|
||||
}
|
||||
this->set_addr_window_(x_start, y_start, x_start + w - 1, y_start + h - 1);
|
||||
this->enable();
|
||||
// x_ and y_offset are offsets into the source buffer, unrelated to our own offsets into the display.
|
||||
if (x_offset == 0 && x_pad == 0 && y_offset == 0) {
|
||||
// we could deal here with a non-zero y_offset, but if x_offset is zero, y_offset probably will be so don't bother
|
||||
this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, ptr, w * h * 2, 4);
|
||||
} else {
|
||||
this->write_cmd_addr_data(8, 0x32, 24, 0x2C00, nullptr, 0, 4);
|
||||
auto stride = x_offset + w + x_pad;
|
||||
for (int y = 0; y != h; y++) {
|
||||
this->write_cmd_addr_data(0, 0, 0, 0, ptr + ((y + y_offset) * stride + x_offset) * 2, w * 2, 4);
|
||||
}
|
||||
}
|
||||
this->disable();
|
||||
}
|
||||
|
||||
void QspiAmoLed::dump_config() {
|
||||
ESP_LOGCONFIG("", "QSPI AMOLED");
|
||||
ESP_LOGCONFIG(TAG, " Height: %u", this->height_);
|
||||
ESP_LOGCONFIG(TAG, " Width: %u", this->width_);
|
||||
LOG_PIN(" CS Pin: ", this->cs_);
|
||||
LOG_PIN(" Reset Pin: ", this->reset_pin_);
|
||||
ESP_LOGCONFIG(TAG, " SPI Data rate: %dMHz", (unsigned) (this->data_rate_ / 1000000));
|
||||
}
|
||||
|
||||
} // namespace qspi_amoled
|
||||
} // namespace esphome
|
||||
#endif
|
||||
165
esphome/components/qspi_amoled/qspi_amoled.h
Normal file
165
esphome/components/qspi_amoled/qspi_amoled.h
Normal file
@@ -0,0 +1,165 @@
|
||||
//
|
||||
// Created by Clyde Stubbs on 29/10/2023.
|
||||
//
|
||||
#pragma once
|
||||
|
||||
#ifdef USE_ESP_IDF
|
||||
#include "esphome/core/component.h"
|
||||
#include "esphome/components/spi/spi.h"
|
||||
#include "esphome/components/display/display.h"
|
||||
#include "esphome/components/display/display_buffer.h"
|
||||
#include "esphome/components/display/display_color_utils.h"
|
||||
#include "esp_lcd_panel_ops.h"
|
||||
|
||||
#include "esp_lcd_panel_rgb.h"
|
||||
|
||||
namespace esphome {
|
||||
namespace qspi_amoled {
|
||||
|
||||
constexpr static const char *const TAG = "display.qspi_amoled";
|
||||
static const uint8_t SW_RESET_CMD = 0x01;
|
||||
static const uint8_t SLEEP_OUT = 0x11;
|
||||
static const uint8_t INVERT_OFF = 0x20;
|
||||
static const uint8_t INVERT_ON = 0x21;
|
||||
static const uint8_t ALL_ON = 0x23;
|
||||
static const uint8_t WRAM = 0x24;
|
||||
static const uint8_t MIPI = 0x26;
|
||||
static const uint8_t DISPLAY_ON = 0x29;
|
||||
static const uint8_t RASET = 0x2B;
|
||||
static const uint8_t CASET = 0x2A;
|
||||
static const uint8_t WDATA = 0x2C;
|
||||
static const uint8_t TEON = 0x35;
|
||||
static const uint8_t MADCTL_CMD = 0x36;
|
||||
static const uint8_t PIXFMT = 0x3A;
|
||||
static const uint8_t BRIGHTNESS = 0x51;
|
||||
static const uint8_t SWIRE1 = 0x5A;
|
||||
static const uint8_t SWIRE2 = 0x5B;
|
||||
static const uint8_t PAGESEL = 0xFE;
|
||||
|
||||
static const uint8_t MADCTL_MY = 0x80; ///< Bit 7 Bottom to top
|
||||
static const uint8_t MADCTL_MX = 0x40; ///< Bit 6 Right to left
|
||||
static const uint8_t MADCTL_MV = 0x20; ///< Bit 5 Reverse Mode
|
||||
static const uint8_t MADCTL_RGB = 0x00; ///< Bit 3 Red-Green-Blue pixel order
|
||||
static const uint8_t MADCTL_BGR = 0x08; ///< Bit 3 Blue-Green-Red pixel order
|
||||
|
||||
// store a 16 bit value in a buffer, big endian.
|
||||
static inline void put16_be(uint8_t *buf, uint16_t value) {
|
||||
buf[0] = value >> 8;
|
||||
buf[1] = value;
|
||||
}
|
||||
|
||||
enum Model {
|
||||
RM690B0,
|
||||
RM67162,
|
||||
};
|
||||
|
||||
class QspiAmoLed : public display::DisplayBuffer,
|
||||
public spi::SPIDevice<spi::BIT_ORDER_MSB_FIRST, spi::CLOCK_POLARITY_LOW, spi::CLOCK_PHASE_LEADING,
|
||||
spi::DATA_RATE_1MHZ> {
|
||||
public:
|
||||
void set_model(Model model) { this->model_ = model; }
|
||||
void update() override;
|
||||
void setup() override;
|
||||
display::ColorOrder get_color_mode() { return this->color_mode_; }
|
||||
void set_color_mode(display::ColorOrder color_mode) { this->color_mode_ = color_mode; }
|
||||
|
||||
void set_reset_pin(GPIOPin *reset_pin) { this->reset_pin_ = reset_pin; }
|
||||
void set_enable_pin(GPIOPin *enable_pin) { this->enable_pin_ = enable_pin; }
|
||||
void set_width(uint16_t width) { this->width_ = width; }
|
||||
void set_dimensions(uint16_t width, uint16_t height) {
|
||||
this->width_ = width;
|
||||
this->height_ = height;
|
||||
}
|
||||
int get_width() override { return this->width_; }
|
||||
int get_height() override { return this->height_; }
|
||||
void set_invert_colors(bool invert_colors) {
|
||||
this->invert_colors_ = invert_colors;
|
||||
this->reset_params_();
|
||||
}
|
||||
void set_mirror_x(bool mirror_x) {
|
||||
this->mirror_x_ = mirror_x;
|
||||
this->reset_params_();
|
||||
}
|
||||
void set_mirror_y(bool mirror_y) {
|
||||
this->mirror_y_ = mirror_y;
|
||||
this->reset_params_();
|
||||
}
|
||||
void set_swap_xy(bool swap_xy) {
|
||||
this->swap_xy_ = swap_xy;
|
||||
this->reset_params_();
|
||||
}
|
||||
void set_brightness(uint8_t brightness) {
|
||||
this->brightness_ = brightness;
|
||||
this->reset_params_();
|
||||
}
|
||||
void set_offsets(int16_t offset_x, int16_t offset_y) {
|
||||
this->offset_x_ = offset_x;
|
||||
this->offset_y_ = offset_y;
|
||||
}
|
||||
display::DisplayType get_display_type() override { return display::DisplayType::DISPLAY_TYPE_COLOR; }
|
||||
void dump_config() override;
|
||||
|
||||
int get_width_internal() override { return this->width_; }
|
||||
int get_height_internal() override { return this->height_; }
|
||||
bool can_proceed() override { return this->setup_complete_; }
|
||||
|
||||
protected:
|
||||
void draw_absolute_pixel_internal(int x, int y, Color color) override;
|
||||
void draw_pixels_at(int x_start, int y_start, int w, int h, const uint8_t *ptr, display::ColorOrder order,
|
||||
display::ColorBitness bitness, bool big_endian, int x_offset, int y_offset, int x_pad) override;
|
||||
/**
|
||||
* the RM67162 in quad SPI mode seems to work like this (not in the datasheet, this is deduced from the
|
||||
* sample code.)
|
||||
*
|
||||
* Immediately after enabling /CS send 4 bytes in single-dataline SPI mode:
|
||||
* 0: either 0x2 or 0x32. The first indicates that any subsequent data bytes after the initial 4 will be
|
||||
* sent in 1-dataline SPI. The second indicates quad mode.
|
||||
* 1: 0x00
|
||||
* 2: The command (register address) byte.
|
||||
* 3: 0x00
|
||||
*
|
||||
* This is followed by zero or more data bytes in either 1-wire or 4-wire mode, depending on the first byte.
|
||||
* At the conclusion of the write, de-assert /CS.
|
||||
*
|
||||
* @param cmd
|
||||
* @param bytes
|
||||
* @param len
|
||||
*/
|
||||
void write_command_(uint8_t cmd, const uint8_t *bytes, size_t len) {
|
||||
this->enable();
|
||||
this->write_cmd_addr_data(8, 0x02, 24, cmd << 8, bytes, len);
|
||||
this->disable();
|
||||
}
|
||||
|
||||
void write_command_(uint8_t cmd, uint8_t data) { this->write_command_(cmd, &data, 1); }
|
||||
void write_command_(uint8_t cmd) { this->write_command_(cmd, &cmd, 0); }
|
||||
void reset_params_(bool ready = false);
|
||||
void write_init_sequence_();
|
||||
void set_addr_window_(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2);
|
||||
|
||||
GPIOPin *reset_pin_{nullptr};
|
||||
GPIOPin *enable_pin_{nullptr};
|
||||
uint16_t x_low_{0};
|
||||
uint16_t y_low_{0};
|
||||
uint16_t x_high_{0};
|
||||
uint16_t y_high_{0};
|
||||
bool setup_complete_{};
|
||||
|
||||
bool invert_colors_{};
|
||||
display::ColorOrder color_mode_{display::COLOR_ORDER_BGR};
|
||||
size_t width_{};
|
||||
size_t height_{};
|
||||
int16_t offset_x_{0};
|
||||
int16_t offset_y_{0};
|
||||
bool swap_xy_{};
|
||||
bool mirror_x_{};
|
||||
bool mirror_y_{};
|
||||
uint8_t brightness_{0xD0};
|
||||
Model model_{RM690B0};
|
||||
|
||||
esp_lcd_panel_handle_t handle_{};
|
||||
};
|
||||
|
||||
} // namespace qspi_amoled
|
||||
} // namespace esphome
|
||||
#endif
|
||||
36
tests/components/qspi_amoled/test.esp32-s3-idf.yaml
Normal file
36
tests/components/qspi_amoled/test.esp32-s3-idf.yaml
Normal file
@@ -0,0 +1,36 @@
|
||||
spi:
|
||||
id: quad_spi
|
||||
clk_pin: 15
|
||||
type: quad
|
||||
data_pins: [14, 10, 16, 12]
|
||||
|
||||
display:
|
||||
- platform: qspi_amoled
|
||||
model: RM690B0
|
||||
data_rate: 80MHz
|
||||
spi_mode: mode0
|
||||
dimensions:
|
||||
width: 450
|
||||
height: 600
|
||||
offset_width: 16
|
||||
color_order: rgb
|
||||
invert_colors: false
|
||||
brightness: 255
|
||||
cs_pin: 11
|
||||
reset_pin: 13
|
||||
enable_pin: 9
|
||||
|
||||
- platform: qspi_amoled
|
||||
model: RM67162
|
||||
id: main_lcd
|
||||
dimensions:
|
||||
height: 240
|
||||
width: 536
|
||||
transform:
|
||||
mirror_x: true
|
||||
swap_xy: true
|
||||
color_order: rgb
|
||||
brightness: 255
|
||||
cs_pin: 6
|
||||
reset_pin: 17
|
||||
enable_pin: 38
|
||||
Reference in New Issue
Block a user