[components] Remove redundant setup priority overrides that duplicate default (#13745)

esphome/components/absolute_humidity/absolute_humidity.cpp

@@ -45,8 +45,6 @@ void AbsoluteHumidityComponent::dump_config() {
                 this->temperature_sensor_->get_name().c_str(), this->humidity_sensor_->get_name().c_str());
 }
 
-float AbsoluteHumidityComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 void AbsoluteHumidityComponent::loop() {
   if (!this->next_update_) {
     return;

esphome/components/absolute_humidity/absolute_humidity.h

@@ -24,7 +24,6 @@ class AbsoluteHumidityComponent : public sensor::Sensor, public Component {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void loop() override;
 
  protected:

esphome/components/adc/adc_sensor.h

@@ -68,11 +68,6 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   /// This method is called during the ESPHome setup process to log the configuration.
   void dump_config() override;
 
-  /// Return the setup priority for this component.
-  /// Components with higher priority are initialized earlier during setup.
-  /// @return A float representing the setup priority.
-  float get_setup_priority() const override;
-
 #ifdef USE_ZEPHYR
   /// Set the ADC channel to be used by the ADC sensor.
   /// @param channel Pointer to an adc_dt_spec structure representing the ADC channel.

esphome/components/adc/adc_sensor_common.cpp

@@ -79,7 +79,5 @@ void ADCSensor::set_sample_count(uint8_t sample_count) {
 
 void ADCSensor::set_sampling_mode(SamplingMode sampling_mode) { this->sampling_mode_ = sampling_mode; }
 
-float ADCSensor::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace adc
 }  // namespace esphome

esphome/components/adc128s102/sensor/adc128s102_sensor.cpp

@@ -9,8 +9,6 @@ static const char *const TAG = "adc128s102.sensor";
 
 ADC128S102Sensor::ADC128S102Sensor(uint8_t channel) : channel_(channel) {}
 
-float ADC128S102Sensor::get_setup_priority() const { return setup_priority::DATA; }
-
 void ADC128S102Sensor::dump_config() {
   LOG_SENSOR("", "ADC128S102 Sensor", this);
   ESP_LOGCONFIG(TAG, "  Pin: %u", this->channel_);

esphome/components/adc128s102/sensor/adc128s102_sensor.h

@@ -19,7 +19,6 @@ class ADC128S102Sensor : public PollingComponent,
 
   void update() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   float sample() override;
 
  protected:

esphome/components/aht10/aht10.cpp

@@ -150,8 +150,6 @@ void AHT10Component::update() {
   this->restart_read_();
 }
 
-float AHT10Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void AHT10Component::dump_config() {
   ESP_LOGCONFIG(TAG, "AHT10:");
   LOG_I2C_DEVICE(this);

esphome/components/aht10/aht10.h

@@ -16,7 +16,6 @@ class AHT10Component : public PollingComponent, public i2c::I2CDevice {
   void setup() override;
   void update() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void set_variant(AHT10Variant variant) { this->variant_ = variant; }
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }

esphome/components/am2315c/am2315c.cpp

@@ -176,7 +176,5 @@ void AM2315C::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
 
-float AM2315C::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace am2315c
 }  // namespace esphome

esphome/components/am2315c/am2315c.h

@@ -33,7 +33,6 @@ class AM2315C : public PollingComponent, public i2c::I2CDevice {
   void dump_config() override;
   void update() override;
   void setup() override;
-  float get_setup_priority() const override;
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { this->temperature_sensor_ = temperature_sensor; }
   void set_humidity_sensor(sensor::Sensor *humidity_sensor) { this->humidity_sensor_ = humidity_sensor; }

esphome/components/am2320/am2320.cpp

@@ -51,7 +51,6 @@ void AM2320Component::dump_config() {
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
-float AM2320Component::get_setup_priority() const { return setup_priority::DATA; }
 
 bool AM2320Component::read_bytes_(uint8_t a_register, uint8_t *data, uint8_t len, uint32_t conversion) {
   if (!this->write_bytes(a_register, data, 2)) {

esphome/components/am2320/am2320.h

@@ -11,7 +11,6 @@ class AM2320Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }

esphome/components/apds9960/apds9960.cpp

@@ -384,7 +384,6 @@ void APDS9960::process_dataset_(int up, int down, int left, int right) {
     }
   }
 }
-float APDS9960::get_setup_priority() const { return setup_priority::DATA; }
 bool APDS9960::is_proximity_enabled_() const {
   return
 #ifdef USE_SENSOR

esphome/components/apds9960/apds9960.h

@@ -32,7 +32,6 @@ class APDS9960 : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
   void loop() override;
 

esphome/components/aqi/aqi_sensor.h

@@ -10,7 +10,6 @@ class AQISensor : public sensor::Sensor, public Component {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override { return setup_priority::DATA; }
 
   void set_pm_2_5_sensor(sensor::Sensor *sensor) { this->pm_2_5_sensor_ = sensor; }
   void set_pm_10_0_sensor(sensor::Sensor *sensor) { this->pm_10_0_sensor_ = sensor; }

esphome/components/as3935/as3935.cpp

@@ -41,8 +41,6 @@ void AS3935Component::dump_config() {
 #endif
 }
 
-float AS3935Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void AS3935Component::loop() {
   if (!this->irq_pin_->digital_read())
     return;

esphome/components/as3935/as3935.h

@@ -74,7 +74,6 @@ class AS3935Component : public Component {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void loop() override;
 
   void set_irq_pin(GPIOPin *irq_pin) { irq_pin_ = irq_pin; }

esphome/components/as5600/sensor/as5600_sensor.cpp

@@ -22,8 +22,6 @@ static const uint8_t REGISTER_STATUS = 0x0B;     // 8 bytes  / R
 static const uint8_t REGISTER_AGC = 0x1A;        // 8 bytes  / R
 static const uint8_t REGISTER_MAGNITUDE = 0x1B;  // 16 bytes / R
 
-float AS5600Sensor::get_setup_priority() const { return setup_priority::DATA; }
-
 void AS5600Sensor::dump_config() {
   LOG_SENSOR("", "AS5600 Sensor", this);
   ESP_LOGCONFIG(TAG, "  Out of Range Mode: %u", this->out_of_range_mode_);

esphome/components/as5600/sensor/as5600_sensor.h

@@ -14,7 +14,6 @@ class AS5600Sensor : public PollingComponent, public Parented<AS5600Component>,
  public:
   void update() override;
   void dump_config() override;
-  float get_setup_priority() const override;
 
   void set_angle_sensor(sensor::Sensor *angle_sensor) { this->angle_sensor_ = angle_sensor; }
   void set_raw_angle_sensor(sensor::Sensor *raw_angle_sensor) { this->raw_angle_sensor_ = raw_angle_sensor; }

esphome/components/as7341/as7341.cpp

@@ -58,8 +58,6 @@ void AS7341Component::dump_config() {
   LOG_SENSOR("  ", "NIR", this->nir_);
 }
 
-float AS7341Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void AS7341Component::update() {
   this->read_channels(this->channel_readings_);
 

esphome/components/as7341/as7341.h

@@ -78,7 +78,6 @@ class AS7341Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_f1_sensor(sensor::Sensor *f1_sensor) { this->f1_ = f1_sensor; }

esphome/components/atm90e26/atm90e26.cpp

@@ -146,7 +146,6 @@ void ATM90E26Component::dump_config() {
   LOG_SENSOR("  ", "Active Reverse Energy A", this->reverse_active_energy_sensor_);
   LOG_SENSOR("  ", "Frequency", this->freq_sensor_);
 }
-float ATM90E26Component::get_setup_priority() const { return setup_priority::DATA; }
 
 uint16_t ATM90E26Component::read16_(uint8_t a_register) {
   uint8_t data[2];

esphome/components/atm90e26/atm90e26.h

@@ -13,7 +13,6 @@ class ATM90E26Component : public PollingComponent,
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_voltage_sensor(sensor::Sensor *obj) { this->voltage_sensor_ = obj; }

esphome/components/bh1750/bh1750.cpp

@@ -265,6 +265,4 @@ void BH1750Sensor::fail_and_reset_() {
   this->state_ = IDLE;
 }
 
-float BH1750Sensor::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace esphome::bh1750

esphome/components/bh1750/bh1750.h

@@ -21,7 +21,6 @@ class BH1750Sensor : public sensor::Sensor, public PollingComponent, public i2c:
   void dump_config() override;
   void update() override;
   void loop() override;
-  float get_setup_priority() const override;
 
  protected:
   // State machine states

esphome/components/bme280_base/bme280_base.cpp

@@ -199,7 +199,6 @@ void BME280Component::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
   ESP_LOGCONFIG(TAG, "    Oversampling: %s", oversampling_to_str(this->humidity_oversampling_));
 }
-float BME280Component::get_setup_priority() const { return setup_priority::DATA; }
 
 inline uint8_t oversampling_to_time(BME280Oversampling over_sampling) { return (1 << uint8_t(over_sampling)) >> 1; }
 

esphome/components/bme280_base/bme280_base.h

@@ -76,7 +76,6 @@ class BME280Component : public PollingComponent {
   // (In most use cases you won't need these)
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/bme680/bme680.cpp

@@ -233,8 +233,6 @@ void BME680Component::dump_config() {
   }
 }
 
-float BME680Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void BME680Component::update() {
   uint8_t meas_control = 0;  // No need to fetch, we're setting all fields
   meas_control |= (this->temperature_oversampling_ & 0b111) << 5;

esphome/components/bme680/bme680.h

@@ -99,7 +99,6 @@ class BME680Component : public PollingComponent, public i2c::I2CDevice {
   // (In most use cases you won't need these)
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/bme680_bsec/bme680_bsec.cpp

@@ -181,8 +181,6 @@ void BME680BSECComponent::dump_config() {
   LOG_SENSOR("  ", "Breath VOC Equivalent", this->breath_voc_equivalent_sensor_);
 }
 
-float BME680BSECComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 void BME680BSECComponent::loop() {
   this->run_();
 

esphome/components/bme680_bsec/bme680_bsec.h

@@ -64,7 +64,6 @@ class BME680BSECComponent : public Component, public i2c::I2CDevice {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void loop() override;
 
  protected:

esphome/components/bme68x_bsec2/bme68x_bsec2.cpp

@@ -106,8 +106,6 @@ void BME68xBSEC2Component::dump_config() {
 #endif
 }
 
-float BME68xBSEC2Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void BME68xBSEC2Component::loop() {
   this->run_();
 

esphome/components/bme68x_bsec2/bme68x_bsec2.h

@@ -48,7 +48,6 @@ class BME68xBSEC2Component : public Component {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void loop() override;
 
   void set_algorithm_output(AlgorithmOutput algorithm_output) { this->algorithm_output_ = algorithm_output; }

esphome/components/bmi160/bmi160.cpp

@@ -263,7 +263,6 @@ void BMI160Component::update() {
 
   this->status_clear_warning();
 }
-float BMI160Component::get_setup_priority() const { return setup_priority::DATA; }
 
 }  // namespace bmi160
 }  // namespace esphome

esphome/components/bmi160/bmi160.h

@@ -14,8 +14,6 @@ class BMI160Component : public PollingComponent, public i2c::I2CDevice {
 
   void update() override;
 
-  float get_setup_priority() const override;
-
   void set_accel_x_sensor(sensor::Sensor *accel_x_sensor) { accel_x_sensor_ = accel_x_sensor; }
   void set_accel_y_sensor(sensor::Sensor *accel_y_sensor) { accel_y_sensor_ = accel_y_sensor; }
   void set_accel_z_sensor(sensor::Sensor *accel_z_sensor) { accel_z_sensor_ = accel_z_sensor; }

esphome/components/bmp085/bmp085.cpp

@@ -131,7 +131,6 @@ bool BMP085Component::set_mode_(uint8_t mode) {
   ESP_LOGV(TAG, "Setting mode to 0x%02X", mode);
   return this->write_byte(BMP085_REGISTER_CONTROL, mode);
 }
-float BMP085Component::get_setup_priority() const { return setup_priority::DATA; }
 
 }  // namespace bmp085
 }  // namespace esphome

esphome/components/bmp085/bmp085.h

@@ -18,8 +18,6 @@ class BMP085Component : public PollingComponent, public i2c::I2CDevice {
   void setup() override;
   void dump_config() override;
 
-  float get_setup_priority() const override;
-
  protected:
   struct CalibrationData {
     int16_t ac1, ac2, ac3;

esphome/components/bmp280_base/bmp280_base.cpp

@@ -148,7 +148,6 @@ void BMP280Component::dump_config() {
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
   ESP_LOGCONFIG(TAG, "    Oversampling: %s", oversampling_to_str(this->pressure_oversampling_));
 }
-float BMP280Component::get_setup_priority() const { return setup_priority::DATA; }
 
 inline uint8_t oversampling_to_time(BMP280Oversampling over_sampling) { return (1 << uint8_t(over_sampling)) >> 1; }
 

esphome/components/bmp280_base/bmp280_base.h

@@ -64,7 +64,6 @@ class BMP280Component : public PollingComponent {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/bmp3xx_base/bmp3xx_base.cpp

@@ -179,7 +179,6 @@ void BMP3XXComponent::dump_config() {
     ESP_LOGCONFIG(TAG, "    Oversampling: %s", LOG_STR_ARG(oversampling_to_str(this->pressure_oversampling_)));
   }
 }
-float BMP3XXComponent::get_setup_priority() const { return setup_priority::DATA; }
 
 inline uint8_t oversampling_to_time(Oversampling over_sampling) { return (1 << uint8_t(over_sampling)); }
 

esphome/components/bmp3xx_base/bmp3xx_base.h

@@ -73,7 +73,6 @@ class BMP3XXComponent : public PollingComponent {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }

esphome/components/cd74hc4067/cd74hc4067.cpp

@@ -7,8 +7,6 @@ namespace cd74hc4067 {
 
 static const char *const TAG = "cd74hc4067";
 
-float CD74HC4067Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void CD74HC4067Component::setup() {
   this->pin_s0_->setup();
   this->pin_s1_->setup();

esphome/components/cd74hc4067/cd74hc4067.h

@@ -13,7 +13,6 @@ class CD74HC4067Component : public Component {
   /// Set up the internal sensor array.
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
 
   /// setting pin active by setting the right combination of the four multiplexer input pins
   void activate_pin(uint8_t pin);

esphome/components/cm1106/cm1106.h

@@ -10,8 +10,6 @@ namespace cm1106 {
 
 class CM1106Component : public PollingComponent, public uart::UARTDevice {
  public:
-  float get_setup_priority() const override { return esphome::setup_priority::DATA; }
-
   void setup() override;
   void update() override;
   void dump_config() override;

esphome/components/combination/combination.h

@@ -10,8 +10,6 @@ namespace combination {
 
 class CombinationComponent : public Component, public sensor::Sensor {
  public:
-  float get_setup_priority() const override { return esphome::setup_priority::DATA; }
-
   /// @brief Logs all source sensor's names
   virtual void log_source_sensors() = 0;
 

esphome/components/cse7761/cse7761.cpp

@@ -62,8 +62,6 @@ void CSE7761Component::dump_config() {
   this->check_uart_settings(38400, 1, uart::UART_CONFIG_PARITY_EVEN, 8);
 }
 
-float CSE7761Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void CSE7761Component::update() {
   if (this->data_.ready) {
     this->get_data_();

esphome/components/cse7761/cse7761.h

@@ -28,7 +28,6 @@ class CSE7761Component : public PollingComponent, public uart::UARTDevice {
   void set_current_2_sensor(sensor::Sensor *current_sensor_2) { current_sensor_2_ = current_sensor_2; }
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/cse7766/cse7766.cpp

@@ -37,7 +37,6 @@ void CSE7766Component::loop() {
     this->raw_data_index_ = (this->raw_data_index_ + 1) % 24;
   }
 }
-float CSE7766Component::get_setup_priority() const { return setup_priority::DATA; }
 
 bool CSE7766Component::check_byte_() {
   uint8_t index = this->raw_data_index_;

esphome/components/cse7766/cse7766.h

@@ -23,7 +23,6 @@ class CSE7766Component : public Component, public uart::UARTDevice {
   void set_power_factor_sensor(sensor::Sensor *power_factor_sensor) { power_factor_sensor_ = power_factor_sensor; }
 
   void loop() override;
-  float get_setup_priority() const override;
   void dump_config() override;
 
  protected:

esphome/components/current_based/current_based_cover.cpp

@@ -159,7 +159,6 @@ void CurrentBasedCover::dump_config() {
                 this->start_sensing_delay_ / 1e3f, YESNO(this->malfunction_detection_));
 }
 
-float CurrentBasedCover::get_setup_priority() const { return setup_priority::DATA; }
 void CurrentBasedCover::stop_prev_trigger_() {
   if (this->prev_command_trigger_ != nullptr) {
     this->prev_command_trigger_->stop_action();

esphome/components/current_based/current_based_cover.h

@@ -14,7 +14,6 @@ class CurrentBasedCover : public cover::Cover, public Component {
   void setup() override;
   void loop() override;
   void dump_config() override;
-  float get_setup_priority() const override;
 
   Trigger<> *get_stop_trigger() { return &this->stop_trigger_; }
 

esphome/components/daly_bms/daly_bms.cpp

@@ -104,8 +104,6 @@ void DalyBmsComponent::loop() {
   }
 }
 
-float DalyBmsComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 void DalyBmsComponent::request_data_(uint8_t data_id) {
   uint8_t request_message[DALY_FRAME_SIZE];
 

esphome/components/daly_bms/daly_bms.h

@@ -72,7 +72,6 @@ class DalyBmsComponent : public PollingComponent, public uart::UARTDevice {
   void update() override;
   void loop() override;
 
-  float get_setup_priority() const override;
   void set_address(uint8_t address) { this->addr_ = address; }
 
  protected:

esphome/components/dht/dht.cpp

@@ -63,8 +63,6 @@ void DHT::update() {
   }
 }
 
-float DHT::get_setup_priority() const { return setup_priority::DATA; }
-
 void DHT::set_dht_model(DHTModel model) {
   this->model_ = model;
   this->is_auto_detect_ = model == DHT_MODEL_AUTO_DETECT;

esphome/components/dht/dht.h

@@ -51,8 +51,6 @@ class DHT : public PollingComponent {
   void dump_config() override;
   /// Update sensor values and push them to the frontend.
   void update() override;
-  /// HARDWARE_LATE setup priority.
-  float get_setup_priority() const override;
 
  protected:
   bool read_sensor_(float *temperature, float *humidity, bool report_errors);

esphome/components/dht12/dht12.cpp

@@ -49,7 +49,7 @@ void DHT12Component::dump_config() {
   LOG_SENSOR("  ", "Temperature", this->temperature_sensor_);
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
-float DHT12Component::get_setup_priority() const { return setup_priority::DATA; }
+
 bool DHT12Component::read_data_(uint8_t *data) {
   if (!this->read_bytes(0, data, 5)) {
     ESP_LOGW(TAG, "Updating DHT12 failed!");

esphome/components/dht12/dht12.h

@@ -11,7 +11,6 @@ class DHT12Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }

esphome/components/dps310/dps310.cpp

@@ -98,8 +98,6 @@ void DPS310Component::dump_config() {
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
 }
 
-float DPS310Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void DPS310Component::update() {
   if (!this->update_in_progress_) {
     this->update_in_progress_ = true;

esphome/components/dps310/dps310.h

@@ -40,7 +40,6 @@ class DPS310Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }

esphome/components/ds1307/ds1307.cpp

@@ -26,8 +26,6 @@ void DS1307Component::dump_config() {
   RealTimeClock::dump_config();
 }
 
-float DS1307Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void DS1307Component::read_time() {
   if (!this->read_rtc_()) {
     return;

esphome/components/ds1307/ds1307.h

@@ -12,7 +12,6 @@ class DS1307Component : public time::RealTimeClock, public i2c::I2CDevice {
   void setup() override;
   void update() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void read_time();
   void write_time();
 

esphome/components/duty_cycle/duty_cycle_sensor.cpp

@@ -43,8 +43,6 @@ void DutyCycleSensor::update() {
   this->last_update_ = now;
 }
 
-float DutyCycleSensor::get_setup_priority() const { return setup_priority::DATA; }
-
 void IRAM_ATTR DutyCycleSensorStore::gpio_intr(DutyCycleSensorStore *arg) {
   const bool new_level = arg->pin.digital_read();
   if (new_level == arg->last_level)

esphome/components/duty_cycle/duty_cycle_sensor.h

@@ -22,7 +22,6 @@ class DutyCycleSensor : public sensor::Sensor, public PollingComponent {
   void set_pin(InternalGPIOPin *pin) { pin_ = pin; }
 
   void setup() override;
-  float get_setup_priority() const override;
   void dump_config() override;
   void update() override;
 

esphome/components/ee895/ee895.cpp

@@ -55,8 +55,6 @@ void EE895Component::dump_config() {
   LOG_SENSOR("  ", "Pressure", this->pressure_sensor_);
 }
 
-float EE895Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void EE895Component::update() {
   write_command_(TEMPERATURE_ADDRESS, 2);
   this->set_timeout(50, [this]() {

esphome/components/ee895/ee895.h

@@ -14,7 +14,6 @@ class EE895Component : public PollingComponent, public i2c::I2CDevice {
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
   void set_pressure_sensor(sensor::Sensor *pressure_sensor) { pressure_sensor_ = pressure_sensor; }
 
-  float get_setup_priority() const override;
   void setup() override;
   void dump_config() override;
   void update() override;

esphome/components/emc2101/sensor/emc2101_sensor.cpp

@@ -7,8 +7,6 @@ namespace emc2101 {
 
 static const char *const TAG = "EMC2101.sensor";
 
-float EMC2101Sensor::get_setup_priority() const { return setup_priority::DATA; }
-
 void EMC2101Sensor::dump_config() {
   ESP_LOGCONFIG(TAG, "Emc2101 sensor:");
   LOG_SENSOR("  ", "Internal temperature", this->internal_temperature_sensor_);

esphome/components/emc2101/sensor/emc2101_sensor.h

@@ -15,8 +15,6 @@ class EMC2101Sensor : public PollingComponent {
   void dump_config() override;
   /** Used by ESPHome framework. */
   void update() override;
-  /** Used by ESPHome framework. */
-  float get_setup_priority() const override;
 
   /** Used by ESPHome framework. */
   void set_internal_temperature_sensor(sensor::Sensor *sensor) { this->internal_temperature_sensor_ = sensor; }

esphome/components/endstop/endstop_cover.cpp

@@ -111,7 +111,7 @@ void EndstopCover::dump_config() {
   LOG_BINARY_SENSOR("  ", "Open Endstop", this->open_endstop_);
   LOG_BINARY_SENSOR("  ", "Close Endstop", this->close_endstop_);
 }
-float EndstopCover::get_setup_priority() const { return setup_priority::DATA; }
+
 void EndstopCover::stop_prev_trigger_() {
   if (this->prev_command_trigger_ != nullptr) {
     this->prev_command_trigger_->stop_action();

esphome/components/endstop/endstop_cover.h

@@ -13,7 +13,6 @@ class EndstopCover : public cover::Cover, public Component {
   void setup() override;
   void loop() override;
   void dump_config() override;
-  float get_setup_priority() const override;
 
   Trigger<> *get_open_trigger() { return &this->open_trigger_; }
   Trigger<> *get_close_trigger() { return &this->close_trigger_; }

esphome/components/ens210/ens210.cpp

@@ -136,8 +136,6 @@ void ENS210Component::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
 
-float ENS210Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void ENS210Component::update() {
   // Execute a single measurement
   if (!this->write_byte(ENS210_REGISTER_SENS_RUN, 0x00)) {

esphome/components/ens210/ens210.h

@@ -10,7 +10,6 @@ namespace ens210 {
 /// This class implements support for the ENS210 relative humidity and temperature i2c sensor.
 class ENS210Component : public PollingComponent, public i2c::I2CDevice {
  public:
-  float get_setup_priority() const override;
   void dump_config() override;
   void setup() override;
   void update() override;

esphome/components/esp32_camera/esp32_camera.cpp

@@ -235,8 +235,6 @@ void ESP32Camera::loop() {
   this->single_requesters_ = 0;
 }
 
-float ESP32Camera::get_setup_priority() const { return setup_priority::DATA; }
-
 /* ---------------- constructors ---------------- */
 ESP32Camera::ESP32Camera() {
   this->config_.pin_pwdn = -1;

esphome/components/esp32_camera/esp32_camera.h

@@ -159,7 +159,6 @@ class ESP32Camera : public camera::Camera {
   void setup() override;
   void loop() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   /* public API (specific) */
   void start_stream(camera::CameraRequester requester) override;
   void stop_stream(camera::CameraRequester requester) override;

esphome/components/esp32_touch/esp32_touch.h

@@ -51,7 +51,6 @@ class ESP32TouchComponent : public Component {
   void setup() override;
   void dump_config() override;
   void loop() override;
-  float get_setup_priority() const override { return setup_priority::DATA; }
 
   void on_shutdown() override;
 

esphome/components/gdk101/gdk101.cpp

@@ -77,8 +77,6 @@ void GDK101Component::dump_config() {
 #endif  // USE_TEXT_SENSOR
 }
 
-float GDK101Component::get_setup_priority() const { return setup_priority::DATA; }
-
 bool GDK101Component::read_bytes_with_retry_(uint8_t a_register, uint8_t *data, uint8_t len) {
   uint8_t retry = NUMBER_OF_READ_RETRIES;
   bool status = false;

esphome/components/gdk101/gdk101.h

@@ -40,7 +40,6 @@ class GDK101Component : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/gp8403/gp8403.h

@@ -20,7 +20,6 @@ class GP8403Component : public Component, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override { return setup_priority::DATA; }
   void set_model(GP8403Model model) { this->model_ = model; }
   void set_voltage(gp8403::GP8403Voltage voltage) { this->voltage_ = voltage; }
 

esphome/components/hc8/hc8.cpp

@@ -86,8 +86,6 @@ void HC8Component::calibrate(uint16_t baseline) {
   this->flush();
 }
 
-float HC8Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void HC8Component::dump_config() {
   ESP_LOGCONFIG(TAG,
                 "HC8:\n"

esphome/components/hc8/hc8.h

@@ -11,8 +11,6 @@ namespace esphome::hc8 {
 
 class HC8Component : public PollingComponent, public uart::UARTDevice {
  public:
-  float get_setup_priority() const override;
-
   void setup() override;
   void update() override;
   void dump_config() override;

esphome/components/hdc1080/hdc1080.h

@@ -16,8 +16,6 @@ class HDC1080Component : public PollingComponent, public i2c::I2CDevice {
   void dump_config() override;
   void update() override;
 
-  float get_setup_priority() const override { return setup_priority::DATA; }
-
  protected:
   sensor::Sensor *temperature_{nullptr};
   sensor::Sensor *humidity_{nullptr};

esphome/components/hlw8012/hlw8012.cpp

@@ -48,7 +48,6 @@ void HLW8012Component::dump_config() {
   LOG_SENSOR("  ", "Power", this->power_sensor_);
   LOG_SENSOR("  ", "Energy", this->energy_sensor_);
 }
-float HLW8012Component::get_setup_priority() const { return setup_priority::DATA; }
 void HLW8012Component::update() {
   // HLW8012 has 50% duty cycle
   pulse_counter::pulse_counter_t raw_cf = this->cf_store_.read_raw_value();

esphome/components/hlw8012/hlw8012.h

@@ -31,7 +31,6 @@ class HLW8012Component : public PollingComponent {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_initial_mode(HLW8012InitialMode initial_mode) {

esphome/components/hm3301/hm3301.cpp

@@ -31,8 +31,6 @@ void HM3301Component::dump_config() {
   LOG_SENSOR("  ", "AQI", this->aqi_sensor_);
 }
 
-float HM3301Component::get_setup_priority() const { return setup_priority::DATA; }
-
 void HM3301Component::update() {
   if (this->read(data_buffer_, 29) != i2c::ERROR_OK) {
     ESP_LOGW(TAG, "Read result failed");

esphome/components/hm3301/hm3301.h

@@ -23,7 +23,6 @@ class HM3301Component : public PollingComponent, public i2c::I2CDevice {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/hmc5883l/hmc5883l.cpp

@@ -83,7 +83,6 @@ void HMC5883LComponent::dump_config() {
   LOG_SENSOR("  ", "Z Axis", this->z_sensor_);
   LOG_SENSOR("  ", "Heading", this->heading_sensor_);
 }
-float HMC5883LComponent::get_setup_priority() const { return setup_priority::DATA; }
 void HMC5883LComponent::update() {
   uint16_t raw_x, raw_y, raw_z;
   if (!this->read_byte_16(HMC5883L_REGISTER_DATA_X_MSB, &raw_x) ||

esphome/components/hmc5883l/hmc5883l.h

@@ -39,7 +39,6 @@ class HMC5883LComponent : public PollingComponent, public i2c::I2CDevice {
  public:
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
   void set_oversampling(HMC5883LOversampling oversampling) { oversampling_ = oversampling; }

esphome/components/homeassistant/time/homeassistant_time.cpp

@@ -11,8 +11,6 @@ void HomeassistantTime::dump_config() {
   RealTimeClock::dump_config();
 }
 
-float HomeassistantTime::get_setup_priority() const { return setup_priority::DATA; }
-
 void HomeassistantTime::setup() { global_homeassistant_time = this; }
 
 void HomeassistantTime::update() { api::global_api_server->request_time(); }

esphome/components/homeassistant/time/homeassistant_time.h

@@ -13,7 +13,6 @@ class HomeassistantTime : public time::RealTimeClock {
   void update() override;
   void dump_config() override;
   void set_epoch_time(uint32_t epoch) { this->synchronize_epoch_(epoch); }
-  float get_setup_priority() const override;
 };
 
 extern HomeassistantTime *global_homeassistant_time;  // NOLINT(cppcoreguidelines-avoid-non-const-global-variables)

esphome/components/honeywell_hih_i2c/honeywell_hih.cpp

@@ -91,7 +91,5 @@ void HoneywellHIComponent::dump_config() {
   LOG_UPDATE_INTERVAL(this);
 }
 
-float HoneywellHIComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace honeywell_hih_i2c
 }  // namespace esphome

esphome/components/honeywell_hih_i2c/honeywell_hih.h

@@ -11,7 +11,6 @@ namespace honeywell_hih_i2c {
 class HoneywellHIComponent : public PollingComponent, public i2c::I2CDevice {
  public:
   void dump_config() override;
-  float get_setup_priority() const override;
   void loop() override;
   void update() override;
 

esphome/components/hte501/hte501.cpp

@@ -43,7 +43,6 @@ void HTE501Component::dump_config() {
   LOG_SENSOR("  ", "Humidity", this->humidity_sensor_);
 }
 
-float HTE501Component::get_setup_priority() const { return setup_priority::DATA; }
 void HTE501Component::update() {
   uint8_t address_1[] = {0x2C, 0x1B};
   this->write(address_1, 2);

esphome/components/hte501/hte501.h

@@ -13,7 +13,6 @@ class HTE501Component : public PollingComponent, public i2c::I2CDevice {
   void set_temperature_sensor(sensor::Sensor *temperature_sensor) { temperature_sensor_ = temperature_sensor; }
   void set_humidity_sensor(sensor::Sensor *humidity_sensor) { humidity_sensor_ = humidity_sensor; }
 
-  float get_setup_priority() const override;
   void setup() override;
   void dump_config() override;
   void update() override;

esphome/components/htu21d/htu21d.cpp

@@ -143,7 +143,5 @@ uint8_t HTU21DComponent::get_heater_level() {
   return raw_heater & 0xF;
 }
 
-float HTU21DComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace htu21d
 }  // namespace esphome

esphome/components/htu21d/htu21d.h

@@ -28,8 +28,6 @@ class HTU21DComponent : public PollingComponent, public i2c::I2CDevice {
   void set_heater_level(uint8_t level);
   uint8_t get_heater_level();
 
-  float get_setup_priority() const override;
-
  protected:
   sensor::Sensor *temperature_{nullptr};
   sensor::Sensor *humidity_{nullptr};

esphome/components/htu31d/htu31d.cpp

@@ -259,11 +259,5 @@ void HTU31DComponent::set_heater_state(bool desired) {
   }
 }
 
-/**
- * Sets the startup priority for this component.
- *
- * @returns The startup priority
- */
-float HTU31DComponent::get_setup_priority() const { return setup_priority::DATA; }
 }  // namespace htu31d
 }  // namespace esphome

esphome/components/htu31d/htu31d.h

@@ -20,8 +20,6 @@ class HTU31DComponent : public PollingComponent, public i2c::I2CDevice {
   void set_heater_state(bool desired);
   bool is_heater_enabled();
 
-  float get_setup_priority() const override;
-
  protected:
   bool reset_();
   uint32_t read_serial_num_();

esphome/components/hx711/hx711.cpp

@@ -22,7 +22,6 @@ void HX711Sensor::dump_config() {
   LOG_PIN("  SCK Pin: ", this->sck_pin_);
   LOG_UPDATE_INTERVAL(this);
 }
-float HX711Sensor::get_setup_priority() const { return setup_priority::DATA; }
 void HX711Sensor::update() {
   uint32_t result;
   if (this->read_sensor_(&result)) {

esphome/components/hx711/hx711.h

@@ -23,7 +23,6 @@ class HX711Sensor : public sensor::Sensor, public PollingComponent {
 
   void setup() override;
   void dump_config() override;
-  float get_setup_priority() const override;
   void update() override;
 
  protected:

esphome/components/hydreon_rgxx/hydreon_rgxx.cpp

@@ -284,7 +284,5 @@ void HydreonRGxxComponent::process_line_() {
   }
 }
 
-float HydreonRGxxComponent::get_setup_priority() const { return setup_priority::DATA; }
-
 }  // namespace hydreon_rgxx
 }  // namespace esphome

esphome/components/hydreon_rgxx/hydreon_rgxx.h

@@ -53,8 +53,6 @@ class HydreonRGxxComponent : public PollingComponent, public uart::UARTDevice {
   void setup() override;
   void dump_config() override;
 
-  float get_setup_priority() const override;
-
   void set_disable_led(bool disable_led) { this->disable_led_ = disable_led; }
 
  protected: