Add support for Waveshare 2.13" V2 display (#6337)

* Add support for Waveshare 2.13" V2 display

* Fix clang-tidy error, add comment about BUSY in deep sleep

* Add test

* Add nullptr check and move tests to separate file

* Fix GPIO pins in test

esphome/components/waveshare_epaper/display.py

@@ -85,6 +85,9 @@ WaveshareEPaper7P5InHDB = waveshare_epaper_ns.class_(
 WaveshareEPaper2P13InDKE = waveshare_epaper_ns.class_(
     "WaveshareEPaper2P13InDKE", WaveshareEPaper
 )
+WaveshareEPaper2P13InV2 = waveshare_epaper_ns.class_(
+    "WaveshareEPaper2P13InV2", WaveshareEPaper
+)
 WaveshareEPaper2P13InV3 = waveshare_epaper_ns.class_(
     "WaveshareEPaper2P13InV3", WaveshareEPaper
 )
@@ -97,6 +100,7 @@ MODELS = {
     "1.54in": ("a", WaveshareEPaperTypeAModel.WAVESHARE_EPAPER_1_54_IN),
     "1.54inv2": ("a", WaveshareEPaperTypeAModel.WAVESHARE_EPAPER_1_54_IN_V2),
     "2.13in": ("a", WaveshareEPaperTypeAModel.WAVESHARE_EPAPER_2_13_IN),
+    "2.13inv2": ("a", WaveshareEPaperTypeAModel.WAVESHARE_EPAPER_2_13_IN_V2),
     "2.13in-ttgo": ("a", WaveshareEPaperTypeAModel.TTGO_EPAPER_2_13_IN),
     "2.13in-ttgo-b1": ("a", WaveshareEPaperTypeAModel.TTGO_EPAPER_2_13_IN_B1),
     "2.13in-ttgo-b73": ("a", WaveshareEPaperTypeAModel.TTGO_EPAPER_2_13_IN_B73),

esphome/components/waveshare_epaper/waveshare_epaper.cpp

@@ -256,12 +256,14 @@ void WaveshareEPaperTypeA::initialize() {
   }
 }
 void WaveshareEPaperTypeA::init_display_() {
-  if (this->model_ == TTGO_EPAPER_2_13_IN_B74) {
+  if (this->model_ == TTGO_EPAPER_2_13_IN_B74 || this->model_ == WAVESHARE_EPAPER_2_13_IN_V2) {
+    if (this->reset_pin_ != nullptr) {
       this->reset_pin_->digital_write(false);
       delay(10);
       this->reset_pin_->digital_write(true);
       delay(10);
       this->wait_until_idle_();
+    }
 
     this->command(0x12);  // SWRESET
     this->wait_until_idle_();
@@ -321,6 +323,9 @@ void WaveshareEPaperTypeA::dump_config() {
     case WAVESHARE_EPAPER_2_13_IN:
       ESP_LOGCONFIG(TAG, "  Model: 2.13in");
       break;
+    case WAVESHARE_EPAPER_2_13_IN_V2:
+      ESP_LOGCONFIG(TAG, "  Model: 2.13inV2");
+      break;
     case TTGO_EPAPER_2_13_IN:
       ESP_LOGCONFIG(TAG, "  Model: 2.13in (TTGO)");
       break;
@@ -366,6 +371,8 @@ void HOT WaveshareEPaperTypeA::display() {
     if (full_update != prev_full_update) {
       switch (this->model_) {
         case TTGO_EPAPER_2_13_IN:
+        case WAVESHARE_EPAPER_2_13_IN_V2:
+          // Waveshare 2.13" V2 uses the same LUTs as TTGO
           this->write_lut_(full_update ? FULL_UPDATE_LUT_TTGO : PARTIAL_UPDATE_LUT_TTGO, LUT_SIZE_TTGO);
           break;
         case TTGO_EPAPER_2_13_IN_B73:
@@ -384,6 +391,41 @@ void HOT WaveshareEPaperTypeA::display() {
     this->at_update_ = (this->at_update_ + 1) % this->full_update_every_;
   }
 
+  if (this->model_ == WAVESHARE_EPAPER_2_13_IN_V2) {
+    // Set VCOM for full or partial update
+    this->command(0x2C);
+    this->data(full_update ? 0x55 : 0x26);
+
+    if (!full_update) {
+      // Enable "ping-pong"
+      this->command(0x37);
+      this->data(0x00);
+      this->data(0x00);
+      this->data(0x00);
+      this->data(0x00);
+      this->data(0x40);
+      this->data(0x00);
+      this->data(0x00);
+      this->command(0x22);
+      this->data(0xc0);
+      this->command(0x20);
+    }
+  }
+
+  // Border waveform
+  switch (this->model_) {
+    case TTGO_EPAPER_2_13_IN_B74:
+      this->command(0x3C);
+      this->data(full_update ? 0x05 : 0x80);
+      break;
+    case WAVESHARE_EPAPER_2_13_IN_V2:
+      this->command(0x3C);
+      this->data(full_update ? 0x03 : 0x01);
+      break;
+    default:
+      break;
+  }
+
   // Set x & y regions we want to write to (full)
   switch (this->model_) {
     case TTGO_EPAPER_2_13_IN_B1:
@@ -407,12 +449,6 @@ void HOT WaveshareEPaperTypeA::display() {
       this->data((this->get_height_internal() - 1) >> 8);
 
       break;
-    case TTGO_EPAPER_2_13_IN_B74:
-      // BorderWaveform
-      this->command(0x3C);
-      this->data(full_update ? 0x05 : 0x80);
-
-      // fall through
     default:
       // COMMAND SET RAM X ADDRESS START END POSITION
       this->command(0x44);
@@ -458,6 +494,14 @@ void HOT WaveshareEPaperTypeA::display() {
   }
   this->end_data_();
 
+  if (this->model_ == WAVESHARE_EPAPER_2_13_IN_V2 && full_update) {
+    // Write base image again on full refresh
+    this->command(0x26);
+    this->start_data_();
+    this->write_array(this->buffer_, this->get_buffer_length_());
+    this->end_data_();
+  }
+
   // COMMAND DISPLAY UPDATE CONTROL 2
   this->command(0x22);
   switch (this->model_) {
@@ -469,6 +513,9 @@ void HOT WaveshareEPaperTypeA::display() {
     case TTGO_EPAPER_2_13_IN_B73:
       this->data(0xC7);
       break;
+    case WAVESHARE_EPAPER_2_13_IN_V2:
+      this->data(full_update ? 0xC7 : 0x0C);
+      break;
     default:
       this->data(0xC4);
       break;
@@ -492,6 +539,7 @@ int WaveshareEPaperTypeA::get_width_internal() {
     case WAVESHARE_EPAPER_1_54_IN_V2:
       return 200;
     case WAVESHARE_EPAPER_2_13_IN:
+    case WAVESHARE_EPAPER_2_13_IN_V2:
     case TTGO_EPAPER_2_13_IN:
     case TTGO_EPAPER_2_13_IN_B73:
     case TTGO_EPAPER_2_13_IN_B74:
@@ -507,6 +555,7 @@ int WaveshareEPaperTypeA::get_width_internal() {
 int WaveshareEPaperTypeA::get_width_controller() {
   switch (this->model_) {
     case WAVESHARE_EPAPER_2_13_IN:
+    case WAVESHARE_EPAPER_2_13_IN_V2:
     case TTGO_EPAPER_2_13_IN:
     case TTGO_EPAPER_2_13_IN_B73:
     case TTGO_EPAPER_2_13_IN_B74:
@@ -522,6 +571,7 @@ int WaveshareEPaperTypeA::get_height_internal() {
     case WAVESHARE_EPAPER_1_54_IN_V2:
       return 200;
     case WAVESHARE_EPAPER_2_13_IN:
+    case WAVESHARE_EPAPER_2_13_IN_V2:
     case TTGO_EPAPER_2_13_IN:
     case TTGO_EPAPER_2_13_IN_B73:
     case TTGO_EPAPER_2_13_IN_B74:
@@ -548,6 +598,7 @@ uint32_t WaveshareEPaperTypeA::idle_timeout_() {
   switch (this->model_) {
     case WAVESHARE_EPAPER_1_54_IN:
     case WAVESHARE_EPAPER_1_54_IN_V2:
+    case WAVESHARE_EPAPER_2_13_IN_V2:
     case TTGO_EPAPER_2_13_IN_B1:
       return 2500;
     default:

esphome/components/waveshare_epaper/waveshare_epaper.h

@@ -90,6 +90,7 @@ enum WaveshareEPaperTypeAModel {
   WAVESHARE_EPAPER_1_54_IN = 0,
   WAVESHARE_EPAPER_1_54_IN_V2,
   WAVESHARE_EPAPER_2_13_IN,
+  WAVESHARE_EPAPER_2_13_IN_V2,
   WAVESHARE_EPAPER_2_9_IN,
   WAVESHARE_EPAPER_2_9_IN_V2,
   TTGO_EPAPER_2_13_IN,
@@ -114,6 +115,7 @@ class WaveshareEPaperTypeA : public WaveshareEPaper {
       case WAVESHARE_EPAPER_1_54_IN:
       case WAVESHARE_EPAPER_1_54_IN_V2:
       case WAVESHARE_EPAPER_2_9_IN_V2:
+      case WAVESHARE_EPAPER_2_13_IN_V2:
         // COMMAND DEEP SLEEP MODE
         this->command(0x10);
         this->data(0x01);
@@ -124,8 +126,12 @@ class WaveshareEPaperTypeA : public WaveshareEPaper {
         this->command(0x10);
         break;
     }
+    if (this->model_ != WAVESHARE_EPAPER_2_13_IN_V2) {
+      // From panel specification:
+      // "After this command initiated, the chip will enter Deep Sleep Mode, BUSY pad will keep output high."
       this->wait_until_idle_();
     }
+  }
 
   void set_full_update_every(uint32_t full_update_every);
 

tests/components/waveshare_epaper/test.esp32.yaml

@@ -0,0 +1,154 @@
+---
+spi:
+  - id: spi_id_1
+    clk_pin:
+      number: GPIO18
+    mosi_pin:
+      number: GPIO23
+    miso_pin:
+      number: GPIO19
+    interface: hardware
+
+display:
+  - platform: waveshare_epaper
+    model: 2.13in-ttgo-b1
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    full_update_every: 30
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.90in
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    full_update_every: 30
+    reset_duration: 200ms
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.90inv2
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    full_update_every: 30
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.70in-b
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.70in-bv2
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 1.54in-m5coreink-m09
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.13inv3
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    full_update_every: 30
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());
+  - platform: waveshare_epaper
+    model: 2.13inv2
+    spi_id: spi_id_1
+    cs_pin:
+      allow_other_uses: true
+      number: GPIO25
+    dc_pin:
+      allow_other_uses: true
+      number: GPIO26
+    busy_pin:
+      allow_other_uses: true
+      number: GPIO27
+    reset_pin:
+      allow_other_uses: true
+      number: GPIO32
+    full_update_every: 30
+    lambda: |-
+      it.rectangle(0, 0, it.get_width(), it.get_height());

tests/test4.yaml

@@ -612,112 +612,6 @@ display:
     rotation: 0°
     update_interval: 16ms
 
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 2.13in-ttgo-b1
-    full_update_every: 30
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 2.90in
-    full_update_every: 30
-    reset_duration: 200ms
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 2.90inv2
-    full_update_every: 30
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 2.70in-b
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 2.70in-bv2
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      allow_other_uses: true
-      number: GPIO23
-    dc_pin:
-      allow_other_uses: true
-      number: GPIO23
-    busy_pin:
-      allow_other_uses: true
-      number: GPIO23
-    reset_pin:
-      allow_other_uses: true
-      number: GPIO23
-    model: 1.54in-m5coreink-m09
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
   - platform: inkplate6
     id: inkplate_display
     greyscale: false
@@ -771,24 +665,6 @@ display:
     vcom_pin:
       number: GPIO1
       allow_other_uses: true
-  - platform: waveshare_epaper
-    spi_id: spi_id_1
-    cs_pin:
-      number: GPIO23
-      allow_other_uses: true
-    dc_pin:
-      number: GPIO23
-      allow_other_uses: true
-    busy_pin:
-      number: GPIO23
-      allow_other_uses: true
-    reset_pin:
-      number: GPIO23
-      allow_other_uses: true
-    model: 2.13inv3
-    full_update_every: 30
-    lambda: |-
-      it.rectangle(0, 0, it.get_width(), it.get_height());
 
 number:
   - platform: tuya