mirror of
				https://github.com/esphome/esphome.git
				synced 2025-10-31 15:12:06 +00:00 
			
		
		
		
	lint
This commit is contained in:
		| @@ -48,7 +48,7 @@ network::IPAddresses GSMComponent::get_ip_addresses() { | ||||
|   network::IPAddresses addresses; | ||||
|   esp_netif_ip_info_t ip; | ||||
|   ESP_LOGV(TAG, "get_ip_addresses"); | ||||
|   esp_err_t err = esp_netif_get_ip_info(this->ppp_netif, &ip); | ||||
|   esp_err_t err = esp_netif_get_ip_info(this->ppp_netif_, &ip); | ||||
|   if (err != ESP_OK) { | ||||
|     ESP_LOGV(TAG, "esp_netif_get_ip_info failed: %s", esp_err_to_name(err)); | ||||
|     // TODO: do something smarter | ||||
| @@ -81,24 +81,24 @@ void GSMComponent::setup() { | ||||
|   // this->powerdown(); | ||||
|  | ||||
|   ESP_LOGV(TAG, "DTE setup"); | ||||
|   esp_modem_dte_config_t dte_config_ = ESP_MODEM_DTE_DEFAULT_CONFIG(); | ||||
|   this->dte_config = dte_config_; | ||||
|   esp_modem_dte_config_t dte_config = ESP_MODEM_DTE_DEFAULT_CONFIG(); | ||||
|   this->dte_config_ = dte_config; | ||||
|  | ||||
|   // this->dte_config = ESP_MODEM_DTE_DEFAULT_CONFIG(); | ||||
|   this->dte_config.uart_config.tx_io_num = this->tx_pin_; | ||||
|   this->dte_config.uart_config.rx_io_num = this->rx_pin_; | ||||
|   // this->dte_config.uart_config.rts_io_num =  static_cast<gpio_num_t>( CONFIG_EXAMPLE_MODEM_UART_RTS_PIN); | ||||
|   // this->dte_config.uart_config.cts_io_num =  static_cast<gpio_num_t>( CONFIG_EXAMPLE_MODEM_UART_CTS_PIN); | ||||
|   this->dte_config.uart_config.rx_buffer_size = CONFIG_MODEM_UART_RX_BUFFER_SIZE; | ||||
|   this->dte_config.uart_config.tx_buffer_size = CONFIG_MODEM_UART_TX_BUFFER_SIZE; | ||||
|   this->dte_config.uart_config.event_queue_size = CONFIG_MODEM_UART_EVENT_QUEUE_SIZE; | ||||
|   this->dte_config.task_stack_size = CONFIG_MODEM_UART_EVENT_TASK_STACK_SIZE * 2; | ||||
|   this->dte_config.task_priority = CONFIG_MODEM_UART_EVENT_TASK_PRIORITY; | ||||
|   this->dte_config.dte_buffer_size = CONFIG_MODEM_UART_RX_BUFFER_SIZE / 2; | ||||
|   // this->dte_config_ = ESP_MODEM_DTE_DEFAULT_CONFIG(); | ||||
|   this->dte_config_.uart_config.tx_io_num = this->tx_pin_; | ||||
|   this->dte_config_.uart_config.rx_io_num = this->rx_pin_; | ||||
|   // this->dte_config_.uart_config.rts_io_num =  static_cast<gpio_num_t>( CONFIG_EXAMPLE_MODEM_UART_RTS_PIN); | ||||
|   // this->dte_config_.uart_config.cts_io_num =  static_cast<gpio_num_t>( CONFIG_EXAMPLE_MODEM_UART_CTS_PIN); | ||||
|   this->dte_config_.uart_config.rx_buffer_size = CONFIG_MODEM_UART_RX_BUFFER_SIZE; | ||||
|   this->dte_config_.uart_config.tx_buffer_size = CONFIG_MODEM_UART_TX_BUFFER_SIZE; | ||||
|   this->dte_config_.uart_config.event_queue_size = CONFIG_MODEM_UART_EVENT_QUEUE_SIZE; | ||||
|   this->dte_config_.task_stack_size = CONFIG_MODEM_UART_EVENT_TASK_STACK_SIZE * 2; | ||||
|   this->dte_config_.task_priority = CONFIG_MODEM_UART_EVENT_TASK_PRIORITY; | ||||
|   this->dte_config_.dte_buffer_size = CONFIG_MODEM_UART_RX_BUFFER_SIZE / 2; | ||||
|  | ||||
|   this->dte = esp_modem::create_uart_dte(&this->dte_config); | ||||
|   this->dte_ = esp_modem::create_uart_dte(&this->dte_config_); | ||||
|  | ||||
|   assert(this->dte); | ||||
|   assert(this->dte_); | ||||
|  | ||||
|   ESP_LOGV(TAG, "Set APN: %s", this->apn_.c_str()); | ||||
|   esp_modem_dce_config_t dce_config = ESP_MODEM_DCE_DEFAULT_CONFIG(this->apn_.c_str()); | ||||
| @@ -111,11 +111,11 @@ void GSMComponent::setup() { | ||||
|   ESPHL_ERROR_CHECK(err, "PPP event loop init error"); | ||||
|   esp_netif_config_t netif_ppp_config = ESP_NETIF_DEFAULT_PPP(); | ||||
|  | ||||
|   this->ppp_netif = esp_netif_new(&netif_ppp_config); | ||||
|   assert(this->ppp_netif); | ||||
|   this->ppp_netif_ = esp_netif_new(&netif_ppp_config); | ||||
|   assert(this->ppp_netif_); | ||||
|   if (!this->username_.empty()) { | ||||
|     ESP_LOGV(TAG, "Set auth: username: %s password: %s", this->username_.c_str(), this->password_.c_str()); | ||||
|     ESPHL_ERROR_CHECK(esp_netif_ppp_set_auth(this->ppp_netif, NETIF_PPP_AUTHTYPE_PAP, this->username_.c_str(), | ||||
|     ESPHL_ERROR_CHECK(esp_netif_ppp_set_auth(this->ppp_netif_, NETIF_PPP_AUTHTYPE_PAP, this->username_.c_str(), | ||||
|                                              this->password_.c_str()), | ||||
|                       "ppp set auth"); | ||||
|   } | ||||
| @@ -123,7 +123,7 @@ void GSMComponent::setup() { | ||||
|   // esp_netif_dns_info_t dns_main = {}; | ||||
|   // dns_main.ip.u_addr.ip4.addr = esp_ip4addr_aton("8.8.8.8"); | ||||
|   // dns_main.ip.type = ESP_IPADDR_TYPE_V4; | ||||
|   // ESPHL_ERROR_CHECK(esp_netif_set_dns_info(this->ppp_netif, ESP_NETIF_DNS_MAIN, &dns_main), "dns_main"); | ||||
|   // ESPHL_ERROR_CHECK(esp_netif_set_dns_info(this->ppp_netif_, ESP_NETIF_DNS_MAIN, &dns_main), "dns_main"); | ||||
|  | ||||
|   // Register user defined event handers | ||||
|   err = esp_event_handler_register(IP_EVENT, IP_EVENT_PPP_GOT_IP, &GSMComponent::got_ip_event_handler, nullptr); | ||||
| @@ -133,16 +133,16 @@ void GSMComponent::setup() { | ||||
|  | ||||
|   switch (this->model_) { | ||||
|     case GSMModel::BG96: | ||||
|       this->dce = create_BG96_dce(&dce_config, dte, this->ppp_netif); | ||||
|       this->dce_ = create_BG96_dce(&dce_config, this->dte_, this->ppp_netif_); | ||||
|       break; | ||||
|     case GSMModel::SIM800: | ||||
|       this->dce = create_SIM800_dce(&dce_config, dte, this->ppp_netif); | ||||
|       this->dce_ = create_SIM800_dce(&dce_config, this->dte_, this->ppp_netif_); | ||||
|       break; | ||||
|     case GSMModel::SIM7000: | ||||
|       this->dce = create_SIM7000_dce(&dce_config, dte, this->ppp_netif); | ||||
|       this->dce_ = create_SIM7000_dce(&dce_config, this->dte_, this->ppp_netif_); | ||||
|       break; | ||||
|     case GSMModel::SIM7600: | ||||
|       this->dce = create_SIM7600_dce(&dce_config, dte, this->ppp_netif); | ||||
|       this->dce_ = create_SIM7600_dce(&dce_config, this->dte_, this->ppp_netif_); | ||||
|       break; | ||||
|     default: | ||||
|       ESP_LOGE(TAG, "Unknown model"); | ||||
| @@ -150,7 +150,7 @@ void GSMComponent::setup() { | ||||
|       break; | ||||
|   } | ||||
|  | ||||
|   assert(this->dce); | ||||
|   assert(this->dce_); | ||||
|  | ||||
|   this->started_ = true; | ||||
|   ESP_LOGV(TAG, "Setup finished"); | ||||
| @@ -167,25 +167,25 @@ void GSMComponent::start_connect_() { | ||||
|   ESP_LOGI(TAG, "Status: %d", (int) this->get_status()); | ||||
|  | ||||
|   // esp_err_t err; | ||||
|   // err = esp_netif_set_hostname(this->ppp_netif, App.get_name().c_str()); | ||||
|   // err = esp_netif_set_hostname(this->ppp_netif_, App.get_name().c_str()); | ||||
|   // if (err != ERR_OK) { | ||||
|   //   ESP_LOGW(TAG, "esp_netif_set_hostname failed: %s", esp_err_to_name(err)); | ||||
|   // } | ||||
|  | ||||
|   global_gsm_component->got_ipv4_address_ = false;  // why not this ? | ||||
|  | ||||
|   this->dce->set_mode(esp_modem::modem_mode::CMUX_MANUAL_COMMAND); | ||||
|   this->dce_->set_mode(esp_modem::modem_mode::CMUX_MANUAL_COMMAND); | ||||
|   vTaskDelay(pdMS_TO_TICKS(2000)); | ||||
|  | ||||
|   command_result res = command_result::TIMEOUT; | ||||
|  | ||||
|   int retry = 0; | ||||
|   while (res != command_result::OK) { | ||||
|     res = this->dce->sync(); | ||||
|     res = this->dce_->sync(); | ||||
|     if (res != command_result::OK) { | ||||
|       ESP_LOGW(TAG, "modem not responding"); | ||||
|       ESP_LOGI(TAG, "Status: %d", (int) this->get_status()); | ||||
|       this->dce->set_command_mode(); | ||||
|       this->dce_->set_command_mode(); | ||||
|       App.feed_wdt(); | ||||
|       vTaskDelay(pdMS_TO_TICKS(7000)); | ||||
|     } | ||||
| @@ -200,8 +200,8 @@ void GSMComponent::start_connect_() { | ||||
|     return; | ||||
|   } | ||||
|  | ||||
|   if (this->dte_config.uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_HW) { | ||||
|     if (command_result::OK != dce->set_flow_control(2, 2)) { | ||||
|   if (this->dte_config_.uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_HW) { | ||||
|     if (command_result::OK != this->dce_->set_flow_control(2, 2)) { | ||||
|       ESP_LOGE(TAG, "Failed to set the set_flow_control mode"); | ||||
|       return; | ||||
|     } | ||||
| @@ -214,8 +214,8 @@ void GSMComponent::start_connect_() { | ||||
|   if (!this->pin_code_.empty()) { | ||||
|     bool pin_ok = true; | ||||
|     ESP_LOGV(TAG, "Set pin code: %s", this->pin_code_.c_str()); | ||||
|     if (dce->read_pin(pin_ok) == command_result::OK && !pin_ok) { | ||||
|       ESP_MODEM_THROW_IF_FALSE(dce->set_pin(this->pin_code_) == command_result::OK, "Cannot set PIN!"); | ||||
|     if (this->dce_->read_pin(pin_ok) == command_result::OK && !pin_ok) { | ||||
|       ESP_MODEM_THROW_IF_FALSE(this->dce_->set_pin(this->pin_code_) == command_result::OK, "Cannot set PIN!"); | ||||
|       vTaskDelay(pdMS_TO_TICKS(2000));  // Need to wait for some time after unlocking the SIM | ||||
|     } | ||||
|   } | ||||
| @@ -224,7 +224,7 @@ void GSMComponent::start_connect_() { | ||||
|  | ||||
|   vTaskDelay(pdMS_TO_TICKS(2000)); | ||||
|  | ||||
|   if (this->dce->set_mode(esp_modem::modem_mode::CMUX_MODE)) { | ||||
|   if (this->dce_->set_mode(esp_modem::modem_mode::CMUX_MODE)) { | ||||
|     ESP_LOGD(TAG, "Modem has correctly entered multiplexed command/data mode"); | ||||
|   } else { | ||||
|     ESP_LOGE(TAG, "Failed to configure multiplexed command mode... exiting"); | ||||
| @@ -284,7 +284,7 @@ void GSMComponent::loop() { | ||||
|  | ||||
| void GSMComponent::dump_connect_params_() { | ||||
|   esp_netif_ip_info_t ip; | ||||
|   esp_netif_get_ip_info(this->ppp_netif, &ip); | ||||
|   esp_netif_get_ip_info(this->ppp_netif_, &ip); | ||||
|   ESP_LOGCONFIG(TAG, "  IP Address: %s", network::IPAddress(&ip.ip).str().c_str()); | ||||
|   ESP_LOGCONFIG(TAG, "  Hostname: '%s'", App.get_name().c_str()); | ||||
|   ESP_LOGCONFIG(TAG, "  Subnet: %s", network::IPAddress(&ip.netmask).str().c_str()); | ||||
| @@ -329,7 +329,7 @@ void GSMComponent::config_gpio_() { | ||||
|   gpio_config(&io_conf); | ||||
| } | ||||
|  | ||||
| void GSMComponent::poweron(void) { | ||||
| void GSMComponent::poweron() { | ||||
|   /* Power on the modem */ | ||||
|  | ||||
|   ESP_LOGI(TAG, "Status: %d", (int) this->get_status()); | ||||
| @@ -357,7 +357,7 @@ void GSMComponent::poweron(void) { | ||||
|   App.feed_wdt(); | ||||
| } | ||||
|  | ||||
| void GSMComponent::powerdown(void) { | ||||
| void GSMComponent::powerdown() { | ||||
|   ESP_LOGI(TAG, "Power down modem"); | ||||
|   ESP_ERROR_CHECK(gpio_set_level(this->power_pin_, 1)); | ||||
| } | ||||
|   | ||||
| @@ -10,9 +10,10 @@ | ||||
| using esphome::esp_log_printf_;  // esp_modem will use esphome logger (needed if other components include | ||||
|                                  // esphome/core/log.h) | ||||
| #include <cxx_include/esp_modem_api.hpp> | ||||
| #include <esp_modem_config.h> | ||||
| #include <driver/gpio.h> | ||||
| #include <esp_modem_config.h> | ||||
| #include <unordered_map> | ||||
| #include <utility> | ||||
|  | ||||
| namespace esphome { | ||||
| namespace gsm { | ||||
| @@ -46,13 +47,13 @@ class GSMComponent : public Component { | ||||
|   void set_tx_pin(gpio_num_t tx_pin) { this->tx_pin_ = tx_pin; } | ||||
|   void set_power_pin(gpio_num_t power_pin) { this->power_pin_ = power_pin; } | ||||
|   void set_flight_pin(gpio_num_t flight_pin) { this->flight_pin_ = flight_pin; } | ||||
|   void set_username(std::string username) { this->username_ = username; } | ||||
|   void set_password(std::string password) { this->password_ = password; } | ||||
|   void set_pin_code(std::string pin_code) { this->pin_code_ = pin_code; } | ||||
|   void set_apn(std::string apn) { this->apn_ = apn; } | ||||
|   void set_username(std::string username) { this->username_ = std::move(username); } | ||||
|   void set_password(std::string password) { this->password_ = std::move(password); } | ||||
|   void set_pin_code(std::string pin_code) { this->pin_code_ = std::move(pin_code); } | ||||
|   void set_apn(std::string apn) { this->apn_ = std::move(apn); } | ||||
|   void set_status_pin(gpio_num_t status_pin) { this->status_pin_ = status_pin; } | ||||
|   void set_dtr_pin(gpio_num_t dtr_pin) { this->dtr_pin_ = dtr_pin; } | ||||
|   void set_model(std::string model) { | ||||
|   void set_model(const std::string &model) { | ||||
|     this->model_ = this->gsm_model_map_.count(model) ? gsm_model_map_[model] : GSMModel::UNKNOWN; | ||||
|   } | ||||
|   bool get_status() { return gpio_get_level(this->status_pin_); } | ||||
| @@ -76,10 +77,10 @@ class GSMComponent : public Component { | ||||
|                                                               {"SIM7070", GSMModel::SIM7070}, | ||||
|                                                               {"SIM7070_GNSS", GSMModel::SIM7070_GNSS}, | ||||
|                                                               {"SIM7600", GSMModel::SIM7600}}; | ||||
|   std::shared_ptr<esp_modem::DTE> dte; | ||||
|   std::unique_ptr<esp_modem::DCE> dce;  // public ? | ||||
|   esp_modem::esp_netif_t *ppp_netif{nullptr}; | ||||
|   esp_modem_dte_config_t dte_config; | ||||
|   std::shared_ptr<esp_modem::DTE> dte_; | ||||
|   std::unique_ptr<esp_modem::DCE> dce_;  // public ? | ||||
|   esp_modem::esp_netif_t *ppp_netif_{nullptr}; | ||||
|   esp_modem_dte_config_t dte_config_; | ||||
|   GSMComponentState state_{GSMComponentState::STOPPED}; | ||||
|   void start_connect_(); | ||||
|   bool started_{false}; | ||||
|   | ||||
		Reference in New Issue
	
	Block a user