diff --git a/esphome/components/mipi_spi/mipi_spi.h b/esphome/components/mipi_spi/mipi_spi.h
index a59cb8104b..fd5bc97596 100644
--- a/esphome/components/mipi_spi/mipi_spi.h
+++ b/esphome/components/mipi_spi/mipi_spi.h
@@ -224,12 +224,9 @@ class MipiSpi : public display::Display,
                     this->madctl_ & MADCTL_BGR ? "BGR" : "RGB", DISPLAYPIXEL * 8, IS_BIG_ENDIAN ? "Big" : "Little");
     if (this->brightness_.has_value())
       esph_log_config(TAG, "  Brightness: %u", this->brightness_.value());
-    if (this->cs_ != nullptr)
-      esph_log_config(TAG, "  CS Pin: %s", this->cs_->dump_summary().c_str());
-    if (this->reset_pin_ != nullptr)
-      esph_log_config(TAG, "  Reset Pin: %s", this->reset_pin_->dump_summary().c_str());
-    if (this->dc_pin_ != nullptr)
-      esph_log_config(TAG, "  DC Pin: %s", this->dc_pin_->dump_summary().c_str());
+    log_pin(TAG, "  CS Pin: ", this->cs_);
+    log_pin(TAG, "  Reset Pin: ", this->reset_pin_);
+    log_pin(TAG, "  DC Pin: ", this->dc_pin_);
     esph_log_config(TAG,
                     "  SPI Mode: %d\n"
                     "  SPI Data rate: %dMHz\n"
diff --git a/esphome/components/mipi_spi/models/adafruit.py b/esphome/components/mipi_spi/models/adafruit.py
index 0e91107bee..26790b1493 100644
--- a/esphome/components/mipi_spi/models/adafruit.py
+++ b/esphome/components/mipi_spi/models/adafruit.py
@@ -26,5 +26,3 @@ ST7789V.extend(
     reset_pin=40,
     invert_colors=True,
 )
-
-models = {}
diff --git a/esphome/components/mipi_spi/models/amoled.py b/esphome/components/mipi_spi/models/amoled.py
index 4d6c8da4b0..32cad70ac0 100644
--- a/esphome/components/mipi_spi/models/amoled.py
+++ b/esphome/components/mipi_spi/models/amoled.py
@@ -105,6 +105,3 @@ CO5300 = DriverChip(
         (WCE, 0x00),
     ),
 )
-
-
-models = {}
diff --git a/esphome/components/mipi_spi/models/cyd.py b/esphome/components/mipi_spi/models/cyd.py
index a25ecf33a8..7229412f18 100644
--- a/esphome/components/mipi_spi/models/cyd.py
+++ b/esphome/components/mipi_spi/models/cyd.py
@@ -1,10 +1,45 @@
-from .ili import ILI9341
+from .ili import ILI9341, ILI9342, ST7789V
 
 ILI9341.extend(
+    # ESP32-2432S028 CYD board with Micro USB, has ILI9341 controller
     "ESP32-2432S028",
     data_rate="40MHz",
-    cs_pin=15,
-    dc_pin=2,
+    cs_pin={"number": 15, "ignore_strapping_warning": True},
+    dc_pin={"number": 2, "ignore_strapping_warning": True},
 )
 
-models = {}
+ST7789V.extend(
+    # ESP32-2432S028 CYD board with USB C + Micro USB, has ST7789V controller
+    "ESP32-2432S028-7789",
+    data_rate="40MHz",
+    cs_pin={"number": 15, "ignore_strapping_warning": True},
+    dc_pin={"number": 2, "ignore_strapping_warning": True},
+)
+
+# fmt: off
+
+ILI9342.extend(
+    # ESP32-2432S028 CYD board with USB C + Micro USB, has ILI9342 controller
+    "ESP32-2432S028-9342",
+    data_rate="40MHz",
+    cs_pin={"number": 15, "ignore_strapping_warning": True},
+    dc_pin={"number": 2, "ignore_strapping_warning": True},
+    initsequence=(
+        (0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02),  # Power Control A
+        (0xCF, 0x00, 0xC1, 0x30),  # Power Control B
+        (0xE8, 0x85, 0x00, 0x78),  # Driver timing control A
+        (0xEA, 0x00, 0x00),  # Driver timing control B
+        (0xED, 0x64, 0x03, 0x12, 0x81),  # Power on sequence control
+        (0xF7, 0x20),  # Pump ratio control
+        (0xC0, 0x23),  # Power Control 1
+        (0xC1, 0x10),  # Power Control 2
+        (0xC5, 0x3E, 0x28),  # VCOM Control 1
+        (0xC7, 0x86),  # VCOM Control 2
+        (0xB1, 0x00, 0x1B),  # Frame Rate Control
+        (0xB6, 0x0A, 0xA2, 0x27, 0x00),  # Display Function Control
+        (0xF2, 0x00),  # Enable 3G
+        (0x26, 0x01),  # Gamma Set
+        (0xE0, 0x00, 0x0C, 0x11, 0x04, 0x11, 0x08, 0x37, 0x89, 0x4C, 0x06, 0x0C, 0x0A, 0x2E, 0x34, 0x0F),  # Positive Gamma Correction
+        (0xE1, 0x00, 0x0B, 0x11, 0x05, 0x13, 0x09, 0x33, 0x67, 0x48, 0x07, 0x0E, 0x0B, 0x23, 0x33, 0x0F),  # Negative Gamma Correction
+    )
+)
diff --git a/esphome/components/mipi_spi/models/ili.py b/esphome/components/mipi_spi/models/ili.py
index 60a25c32a9..6b672b0859 100644
--- a/esphome/components/mipi_spi/models/ili.py
+++ b/esphome/components/mipi_spi/models/ili.py
@@ -148,6 +148,34 @@ ILI9341 = DriverChip(
         ),
     ),
 )
+
+# fmt: off
+
+ILI9342 = DriverChip(
+    "ILI9342",
+    width=320,
+    height=240,
+    mirror_x=True,
+    initsequence=(
+        (0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02),  # Power Control A
+        (0xCF, 0x00, 0xC1, 0x30),  # Power Control B
+        (0xE8, 0x85, 0x00, 0x78),  # Driver timing control A
+        (0xEA, 0x00, 0x00),  # Driver timing control B
+        (0xED, 0x64, 0x03, 0x12, 0x81),  # Power on sequence control
+        (0xF7, 0x20),  # Pump ratio control
+        (0xC0, 0x23),  # Power Control 1
+        (0xC1, 0x10),  # Power Control 2
+        (0xC5, 0x3E, 0x28),  # VCOM Control 1
+        (0xC7, 0x86),  # VCOM Control 2
+        (0xB1, 0x00, 0x1B),  # Frame Rate Control
+        (0xB6, 0x0A, 0xA2, 0x27, 0x00),  # Display Function Control
+        (0xF2, 0x00),  # Enable 3G
+        (0x26, 0x01),  # Gamma Set
+        (0xE0, 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00),  # Positive Gamma
+        (0xE1, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00),  # Negative Gamma
+    ),
+)
+
 # M5Stack Core2 uses ILI9341 chip - mirror_x disabled for correct orientation
 ILI9341.extend(
     "M5CORE2",
@@ -758,5 +786,3 @@ ST7796.extend(
     dc_pin=0,
     invert_colors=True,
 )
-
-models = {}
diff --git a/esphome/components/mipi_spi/models/jc.py b/esphome/components/mipi_spi/models/jc.py
index 5b936fd956..854814f572 100644
--- a/esphome/components/mipi_spi/models/jc.py
+++ b/esphome/components/mipi_spi/models/jc.py
@@ -588,5 +588,3 @@ DriverChip(
         (0x29, 0x00),
     ),
 )
-
-models = {}
diff --git a/esphome/components/mipi_spi/models/lanbon.py b/esphome/components/mipi_spi/models/lanbon.py
index 6f9aa58674..8cec3c8317 100644
--- a/esphome/components/mipi_spi/models/lanbon.py
+++ b/esphome/components/mipi_spi/models/lanbon.py
@@ -11,5 +11,3 @@ ST7789V.extend(
     dc_pin=21,
     reset_pin=18,
 )
-
-models = {}
diff --git a/esphome/components/mipi_spi/models/lilygo.py b/esphome/components/mipi_spi/models/lilygo.py
index 13ddc67465..46ec809029 100644
--- a/esphome/components/mipi_spi/models/lilygo.py
+++ b/esphome/components/mipi_spi/models/lilygo.py
@@ -56,5 +56,3 @@ ST7796.extend(
     backlight_pin=48,
     invert_colors=True,
 )
-
-models = {}