sascha/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-10-31 15:12:06 +00:00
Code Issues Releases Wiki Activity

[sps30] Shorten log messages (#8971)

Browse Source
This commit is contained in:
Keith Burzinski
2025-06-03 15:50:22 -05:00
committed by GitHub
parent b39a9924d8
commit 935e0a365f
1 changed files with 8 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
esphome/components/sps30/sps30.cpp
View File

@@ -113,18 +113,18 @@ void SPS30Component::dump_config() {
void SPS30Component::update() {
/// Check if warning flag active (sensor reconnected?)
if (this->status_has_warning()) {
ESP_LOGD(TAG, "Trying to reconnect the sensor...");
ESP_LOGD(TAG, "Trying to reconnect");
if (this->write_command(SPS30_CMD_SOFT_RESET)) {
ESP_LOGD(TAG, "Sensor has soft-reset successfully. Waiting for reconnection in 500ms...");
ESP_LOGD(TAG, "Soft-reset successful. Waiting for reconnection in 500 ms");
this->set_timeout(500, [this]() {
this->start_continuous_measurement_();
/// Sensor restarted and reading attempt made next cycle
this->status_clear_warning();
this->skipped_data_read_cycles_ = 0;
ESP_LOGD(TAG, "Sensor reconnected successfully. Resuming continuous measurement!");
ESP_LOGD(TAG, "Reconnect successful. Resuming continuous measurement");
});
} else {
ESP_LOGD(TAG, "Sensor soft-reset failed. Is the sensor offline?");
ESP_LOGD(TAG, "Soft-reset failed");
}
return;
}
@@ -136,19 +136,19 @@ void SPS30Component::update() {
uint16_t raw_read_status;
if (!this->read_data(&raw_read_status, 1) || raw_read_status == 0x00) {
ESP_LOGD(TAG, "Sensor measurement not ready yet.");
ESP_LOGD(TAG, "Not ready yet");
this->skipped_data_read_cycles_++;
/// The following logic is required to address the cases when a sensor is quickly replaced before it's marked
/// as failed so that new sensor is eventually forced to be reinitialized for continuous measurement.
if (this->skipped_data_read_cycles_ > MAX_SKIPPED_DATA_CYCLES_BEFORE_ERROR) {
ESP_LOGD(TAG, "Sensor exceeded max allowed attempts. Sensor communication will be reinitialized.");
ESP_LOGD(TAG, "Exceeded max allowed attempts; communication will be reinitialized");
this->status_set_warning();
}
return;
}
if (!this->write_command(SPS30_CMD_READ_MEASUREMENT)) {
ESP_LOGW(TAG, "Error reading measurement status!");
ESP_LOGW(TAG, "Error reading status");
this->status_set_warning();
return;
}
@@ -156,7 +156,7 @@ void SPS30Component::update() {
this->set_timeout(50, [this]() {
uint16_t raw_data[20];
if (!this->read_data(raw_data, 20)) {
ESP_LOGW(TAG, "Error reading measurement data!");
ESP_LOGW(TAG, "Error reading data");
this->status_set_warning();
return;
}