Add CO5300 display support (#9739)

esphome/components/mipi/__init__.py

@@ -77,6 +77,7 @@ BRIGHTNESS = 0x51
 WRDISBV = 0x51
 RDDISBV = 0x52
 WRCTRLD = 0x53
+WCE = 0x58
 SWIRE1 = 0x5A
 SWIRE2 = 0x5B
 IFMODE = 0xB0
@@ -91,6 +92,7 @@ PWCTR2 = 0xC1
 PWCTR3 = 0xC2
 PWCTR4 = 0xC3
 PWCTR5 = 0xC4
+SPIMODESEL = 0xC4
 VMCTR1 = 0xC5
 IFCTR = 0xC6
 VMCTR2 = 0xC7

esphome/components/mipi_spi/models/amoled.py

@@ -5,10 +5,13 @@ from esphome.components.mipi import (
     PAGESEL,
     PIXFMT,
     SLPOUT,
+    SPIMODESEL,
     SWIRE1,
     SWIRE2,
     TEON,
+    WCE,
     WRAM,
+    WRCTRLD,
     DriverChip,
     delay,
 )
@@ -87,4 +90,19 @@ T4_S3_AMOLED = RM690B0.extend(
     bus_mode=TYPE_QUAD,
 )
 
+CO5300 = DriverChip(
+    "CO5300",
+    brightness=0xD0,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    initsequence=(
+        (SLPOUT,),  # Requires early SLPOUT
+        (PAGESEL, 0x00),
+        (SPIMODESEL, 0x80),
+        (WRCTRLD, 0x20),
+        (WCE, 0x00),
+    ),
+)
+
+
 models = {}

esphome/components/mipi_spi/models/waveshare.py

@@ -1,6 +1,7 @@
 from esphome.components.mipi import DriverChip
 import esphome.config_validation as cv
 
+from .amoled import CO5300
 from .ili import ILI9488_A
 
 DriverChip(
@@ -140,3 +141,14 @@ ILI9488_A.extend(
     data_rate="20MHz",
     invert_colors=True,
 )
+
+CO5300.extend(
+    "WAVESHARE-ESP32-S3-TOUCH-AMOLED-1.75",
+    width=466,
+    height=466,
+    pixel_mode="16bit",
+    offset_height=0,
+    offset_width=6,
+    cs_pin=12,
+    reset_pin=39,
+)