Merge branch 'dev' into multi_device

tests/components/atm90e32/common.yaml

@@ -17,10 +17,22 @@ sensor:
         name: EMON Active Power CT1
       reactive_power:
         name: EMON Reactive Power CT1
+      apparent_power:
+        name: EMON Apparent Power CT1
+      harmonic_power:
+        name: EMON Harmonic Power CT1
       power_factor:
         name: EMON Power Factor CT1
+      phase_angle:
+        name: EMON Phase Angle CT1
+      peak_current:
+        name: EMON Peak Current CT1
       gain_voltage: 7305
       gain_ct: 27961
+      offset_voltage: 0
+      offset_current: 0
+      offset_active_power: 0
+      offset_reactive_power: 0
     phase_b:
       current:
         name: EMON CT2 Current
@@ -28,10 +40,22 @@ sensor:
         name: EMON Active Power CT2
       reactive_power:
         name: EMON Reactive Power CT2
+      apparent_power:
+        name: EMON Apparent Power CT2
+      harmonic_power:
+        name: EMON Harmonic Power CT2
       power_factor:
         name: EMON Power Factor CT2
+      phase_angle:
+        name: EMON Phase Angle CT2
+      peak_current:
+        name: EMON Peak Current CT2
       gain_voltage: 7305
       gain_ct: 27961
+      offset_voltage: 0
+      offset_current: 0
+      offset_active_power: 0
+      offset_reactive_power: 0
     phase_c:
       current:
         name: EMON CT3 Current
@@ -39,23 +63,75 @@ sensor:
         name: EMON Active Power CT3
       reactive_power:
         name: EMON Reactive Power CT3
+      apparent_power:
+        name: EMON Apparent Power CT3
+      harmonic_power:
+        name: EMON Harmonic Power CT3
       power_factor:
         name: EMON Power Factor CT3
+      phase_angle:
+        name: EMON Phase Angle CT3
+      peak_current:
+        name: EMON Peak Current CT3
       gain_voltage: 7305
       gain_ct: 27961
+      offset_voltage: 0
+      offset_current: 0
+      offset_active_power: 0
+      offset_reactive_power: 0
     frequency:
       name: EMON Line Frequency
     chip_temperature:
-      name: EMON Chip Temp A
+      name: EMON Chip Temp
     line_frequency: 60Hz
     current_phases: 3
-    gain_pga: 2X
+    gain_pga: 1X
     enable_offset_calibration: True
+    enable_gain_calibration: True
+
+text_sensor:
+  - platform: atm90e32
+    id: atm90e32_chip1
+    phase_status:
+      phase_a:
+        name: "Phase A Status"
+      phase_b:
+        name: "Phase B Status"
+      phase_c:
+        name: "Phase C Status"
+    frequency_status:
+      name: "Frequency Status"
 
 button:
   - platform: atm90e32
     id: atm90e32_chip1
+    run_gain_calibration:
+      name: "Run Gain Calibration"
+    clear_gain_calibration:
+      name: "Clear Gain Calibration"
     run_offset_calibration:
-      name: Chip1 - Run Offset Calibration
+      name: "Run Offset Calibration"
     clear_offset_calibration:
-      name: Chip1 - Clear Offset Calibration
+      name: "Clear Offset Calibration"
+    run_power_offset_calibration:
+      name: "Run Power Offset Calibration"
+    clear_power_offset_calibration:
+      name: "Clear Power Offset Calibration"
+
+number:
+  - platform: atm90e32
+    id: atm90e32_chip1
+    reference_voltage:
+      phase_a:
+        name: "Phase A Ref Voltage"
+      phase_b:
+        name: "Phase B Ref Voltage"
+      phase_c:
+        name: "Phase C Ref Voltage"
+    reference_current:
+      phase_a:
+        name: "Phase A Ref Current"
+      phase_b:
+        name: "Phase B Ref Current"
+      phase_c:
+        name: "Phase C Ref Current"

tests/components/cm1106/common.yaml

@@ -0,0 +1,11 @@
+uart:
+  - id: uart_cm1106
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 9600
+
+sensor:
+  - platform: cm1106
+    co2:
+      name: CM1106 CO2 Value
+    update_interval: 15s

tests/components/cm1106/test.esp32-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+<<: !include common.yaml

tests/components/cm1106/test.esp32-c3-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+<<: !include common.yaml

tests/components/cm1106/test.esp32-c3-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+<<: !include common.yaml

tests/components/cm1106/test.esp32-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+<<: !include common.yaml

tests/components/cm1106/test.esp8266-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+<<: !include common.yaml

tests/components/cm1106/test.rp2040-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+<<: !include common.yaml

tests/components/demo/test.esp32-idf.yaml

@@ -0,0 +1 @@
+demo:

tests/components/dfrobot_sen0395/common.yaml

@@ -26,3 +26,17 @@ dfrobot_sen0395:
 binary_sensor:
   - platform: dfrobot_sen0395
     id: mmwave_detected
+
+switch:
+  - platform: dfrobot_sen0395
+    type: sensor_active
+    id: mmwave_sensor_active
+  - platform: dfrobot_sen0395
+    type: turn_on_led
+    id: mmwave_turn_on_led
+  - platform: dfrobot_sen0395
+    type: presence_via_uart
+    id: mmwave_presence_via_uart
+  - platform: dfrobot_sen0395
+    type: start_after_boot
+    id: mmwave_start_after_boot

tests/components/esp32_ble_tracker/test.esp32-ard.yaml

@@ -1,4 +1,5 @@
 <<: !include common.yaml
 
 esp32_ble_tracker:
+  software_coexistence: true
   max_connections: 3

tests/components/esp32_ble_tracker/test.esp32-c3-ard.yaml

@@ -2,3 +2,4 @@
 
 esp32_ble_tracker:
   max_connections: 3
+  software_coexistence: false

tests/components/esp32_ble_tracker/test.esp32-c3-idf.yaml

@@ -2,3 +2,4 @@
 
 esp32_ble_tracker:
   max_connections: 9
+  software_coexistence: false

tests/components/esp32_ble_tracker/test.esp32-idf.yaml

@@ -1,4 +1,5 @@
 <<: !include common.yaml
 
 esp32_ble_tracker:
+  software_coexistence: true
   max_connections: 9

tests/components/gps/common.yaml

@@ -6,6 +6,20 @@ uart:
     parity: EVEN
 
 gps:
+  latitude:
+    name: "Latitude"
+  longitude:
+    name: "Longitude"
+  altitude:
+    name: "Altitude"
+  speed:
+    name: "Speed"
+  course:
+    name: "Course"
+  satellites:
+    name: "Satellites"
+  hdop:
+    name: "HDOP"
 
 time:
   - platform: gps

tests/components/key_collector/common.yaml

@@ -26,3 +26,11 @@ key_collector:
       - logger.log:
           format: "input timeout: '%s', started by '%c'"
           args: ['x.c_str()', "(start == 0 ? '~' : start)"]
+    enable_on_boot: false
+
+button:
+  - platform: template
+    id: button0
+    on_press:
+      - key_collector.enable:
+      - key_collector.disable:

tests/components/lock/common.yaml

@@ -27,9 +27,7 @@ lock:
           id: test_lock1
           state: !lambda "return LOCK_STATE_UNLOCKED;"
     on_lock:
-      - lock.template.publish:
-          id: test_lock1
-          state: !lambda "return LOCK_STATE_LOCKED;"
+      - lock.template.publish: LOCKED
   - platform: output
     name: Generic Output Lock
     id: test_lock2

tests/components/logger/test-custom_buffer_size.esp32-idf.yaml

@@ -0,0 +1,5 @@
+<<: !include common-default_uart.yaml
+
+logger:
+  id: logger_id
+  task_log_buffer_size: 1024B  # Set a custom buffer size

tests/components/logger/test-disable_log_buffer.esp32-idf.yaml

@@ -0,0 +1,5 @@
+<<: !include common-default_uart.yaml
+
+logger:
+  id: logger_id
+  task_log_buffer_size: 0

tests/components/logger/test-max_buffer_size.esp32-idf.yaml

@@ -0,0 +1,5 @@
+<<: !include common-default_uart.yaml
+
+logger:
+  id: logger_id
+  task_log_buffer_size: 32768B  # Maximum buffer size

tests/components/logger/test-min_buffer_size.esp32-idf.yaml

@@ -0,0 +1,5 @@
+<<: !include common-default_uart.yaml
+
+logger:
+  id: logger_id
+  task_log_buffer_size: 640B  # Minimum buffer size with thread names

tests/components/lvgl/lvgl-package.yaml

@@ -781,6 +781,13 @@ lvgl:
                     value: !lambda return (int)((float)rand() / RAND_MAX * 100);
         - tabview:
             id: tabview_id
+            tab_style:
+              border_color: 0x00FF00
+              border_width: 6
+              items:
+                text_color: 0x0000FF
+            content_style:
+              scrollable: false
             width: 100%
             height: 80%
             position: top

tests/components/max7219digit/common.yaml

@@ -14,3 +14,15 @@ display:
     id: my_matrix
     lambda: |-
       it.printdigit("hello");
+
+esphome:
+  on_boot:
+    - priority: 100
+      then:
+        - max7129digit.invert_off:
+        - max7129digit.invert_on:
+        - max7129digit.turn_on:
+        - max7129digit.turn_off:
+        - max7129digit.reverse_on:
+        - max7129digit.reverse_off:
+        - max7129digit.intensity: 10

tests/components/microphone/common.yaml

@@ -10,6 +10,7 @@ microphone:
     adc_type: external
     pdm: false
     mclk_multiple: 384
+    correct_dc_offset: true
     on_data:
       - if:
           condition:

tests/components/mipi_spi/common.yaml

@@ -0,0 +1,38 @@
+spi:
+  - id: spi_single
+    clk_pin:
+      number: ${clk_pin}
+      allow_other_uses: true
+    mosi_pin:
+      number: ${mosi_pin}
+
+display:
+  - platform: mipi_spi
+    spi_16: true
+    pixel_mode: 18bit
+    model: ili9488
+    dc_pin: ${dc_pin}
+    cs_pin: ${cs_pin}
+    reset_pin: ${reset_pin}
+    data_rate: 20MHz
+    invert_colors: true
+    show_test_card: true
+    spi_mode: mode0
+    draw_rounding: 8
+    use_axis_flips: true
+    init_sequence:
+      - [0xd0, 1, 2, 3]
+      - delay 10ms
+    transform:
+      swap_xy: true
+      mirror_x: false
+      mirror_y: true
+    dimensions:
+      width: 100
+      height: 200
+    enable_pin:
+      - number: ${clk_pin}
+        allow_other_uses: true
+      - number: ${enable_pin}
+    bus_mode: single
+

tests/components/mipi_spi/test-esp32-2432s028.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: ESP32-2432S028

tests/components/mipi_spi/test-jc3248w535.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: JC3248W535

tests/components/mipi_spi/test-jc3636w518.esp32-s3-idf.yaml

@@ -0,0 +1,19 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 36
+    data_pins:
+      - number: 40
+      - number: 41
+      - number: 42
+      - number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: JC3636W518

tests/components/mipi_spi/test-pico-restouch-lcd-35.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: Pico-ResTouch-LCD-3.5

tests/components/mipi_spi/test-s3box.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: S3BOX

tests/components/mipi_spi/test-s3boxlite.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: S3BOXLITE

tests/components/mipi_spi/test-t-display-s3-amoled-plus.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-AMOLED-PLUS

tests/components/mipi_spi/test-t-display-s3-amoled.esp32-s3-idf.yaml

@@ -0,0 +1,15 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - number: 40
+      - number: 41
+      - number: 42
+      - number: 43
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-AMOLED

tests/components/mipi_spi/test-t-display-s3-pro.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 40
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3-PRO

tests/components/mipi_spi/test-t-display-s3.esp32-s3-idf.yaml

@@ -0,0 +1,37 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY-S3

tests/components/mipi_spi/test-t-display.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T-DISPLAY

tests/components/mipi_spi/test-t-embed.esp32-s3-idf.yaml

@@ -0,0 +1,9 @@
+spi:
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 40
+
+display:
+  - platform: mipi_spi
+    model: T-EMBED

tests/components/mipi_spi/test-t4-s3.esp32-s3-idf.yaml

@@ -0,0 +1,41 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 0
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: spi_id_3
+    interface: any
+    clk_pin: 8
+    mosi_pin: 9
+
+display:
+  - platform: mipi_spi
+    model: T4-S3

tests/components/mipi_spi/test-wt32-sc01-plus.esp32-s3-idf.yaml

@@ -0,0 +1,37 @@
+spi:
+  - id: quad_spi
+    type: quad
+    interface: spi3
+    clk_pin:
+      number: 47
+    data_pins:
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+  - id: octal_spi
+    type: octal
+    interface: hardware
+    clk_pin:
+      number: 9
+    data_pins:
+      - 36
+      - 37
+      - 38
+      - 39
+      - allow_other_uses: true
+        number: 40
+      - allow_other_uses: true
+        number: 41
+      - allow_other_uses: true
+        number: 42
+      - allow_other_uses: true
+        number: 43
+
+display:
+  - platform: mipi_spi
+    model: WT32-SC01-PLUS

tests/components/mipi_spi/test.esp32-ard.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  clk_pin: GPIO16
+  mosi_pin: GPIO17
+  miso_pin: GPIO15
+  dc_pin: GPIO14
+  cs_pin: GPIO13
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+display:
+  - platform: mipi_spi
+    model: LANBON-L8
+
+packages:
+  display: !include common.yaml

tests/components/mipi_spi/test.esp32-c3-ard.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO6
+  mosi_pin: GPIO7
+  miso_pin: GPIO5
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml

tests/components/mipi_spi/test.esp32-c3-idf.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO6
+  mosi_pin: GPIO7
+  miso_pin: GPIO5
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml

tests/components/mipi_spi/test.esp32-idf.yaml

@@ -0,0 +1,15 @@
+substitutions:
+  clk_pin: GPIO16
+  mosi_pin: GPIO17
+  miso_pin: GPIO15
+  dc_pin: GPIO21
+  cs_pin: GPIO18
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+packages:
+  display: !include common.yaml
+
+display:
+  - platform: mipi_spi
+    model: m5core

tests/components/mipi_spi/test.rp2040-ard.yaml

@@ -0,0 +1,10 @@
+substitutions:
+  clk_pin: GPIO2
+  mosi_pin: GPIO3
+  miso_pin: GPIO4
+  dc_pin: GPIO14
+  cs_pin: GPIO13
+  enable_pin: GPIO19
+  reset_pin: GPIO20
+
+<<: !include common.yaml

tests/components/mqtt/common.yaml

@@ -293,6 +293,8 @@ fan:
   - platform: template
     name: Template Fan
     state_topic: some/topic/fan
+    direction_state_topic: some/topic/direction/state
+    direction_command_topic: some/topic/direction/command
     qos: 2
     on_state:
       - logger.log: on_state

tests/components/psram/test.esp32-s3-idf.yaml

@@ -1,4 +1,5 @@
 esp32:
+  cpu_frequency: 240MHz
   framework:
     type: esp-idf
     advanced:

tests/components/sound_level/common.yaml

@@ -0,0 +1,26 @@
+i2s_audio:
+  i2s_lrclk_pin: ${i2s_bclk_pin}
+  i2s_bclk_pin: ${i2s_lrclk_pin}
+
+microphone:
+  - platform: i2s_audio
+    id: i2s_microphone
+    i2s_din_pin: ${i2s_dout_pin}
+    adc_type: external
+    bits_per_sample: 16bit
+
+sensor:
+  - platform: sound_level
+    microphone: i2s_microphone
+    measurement_duration: 2000ms
+    passive: false
+    peak:
+      name: "Peak Sound Level"
+      on_value_range:
+        - above: -1.0
+          then:
+            - sound_level.stop:
+            - delay: 5s
+            - sound_level.start:
+    rms:
+      name: "RMS Sound Level"

tests/components/sound_level/test.esp32-ard.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO25
+  i2s_lrclk_pin: GPIO26
+  i2s_dout_pin: GPIO27
+
+<<: !include common.yaml

tests/components/sound_level/test.esp32-c3-ard.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO6
+  i2s_lrclk_pin: GPIO7
+  i2s_dout_pin: GPIO8
+
+<<: !include common.yaml

tests/components/sound_level/test.esp32-c3-idf.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO6
+  i2s_lrclk_pin: GPIO7
+  i2s_dout_pin: GPIO8
+
+<<: !include common.yaml

tests/components/sound_level/test.esp32-idf.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO25
+  i2s_lrclk_pin: GPIO26
+  i2s_dout_pin: GPIO27
+
+<<: !include common.yaml

tests/components/sound_level/test.esp32-s3-ard.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO4
+  i2s_lrclk_pin: GPIO5
+  i2s_dout_pin: GPIO6
+
+<<: !include common.yaml

tests/components/sound_level/test.esp32-s3-idf.yaml

@@ -0,0 +1,6 @@
+substitutions:
+  i2s_bclk_pin: GPIO4
+  i2s_lrclk_pin: GPIO5
+  i2s_dout_pin: GPIO6
+
+<<: !include common.yaml

tests/components/template/common.yaml

@@ -174,6 +174,8 @@ valve:
       - logger.log: open_action
     close_action:
       - logger.log: close_action
+      - valve.template.publish:
+          state: CLOSED
     stop_action:
       - logger.log: stop_action
     optimistic: true

tests/components/tuya/common.yaml

@@ -60,12 +60,19 @@ number:
 
 select:
   - platform: tuya
-    id: tuya_select
+    id: tuya_select_enum
     enum_datapoint: 42
     options:
       0: Internal
       1: Floor
       2: Both
+  - platform: tuya
+    id: tuya_select_int
+    int_datapoint: 43
+    options:
+      0: Internal
+      1: Floor
+      2: Both
 
 sensor:
   - platform: tuya

tests/components/usb_host/test.esp32-s3-idf.yaml

@@ -0,0 +1,5 @@
+usb_host:
+  devices:
+    - id: device_1
+      vid: 0x1234
+      pid: 0x1234

tests/components/usb_uart/common.yaml

@@ -0,0 +1,33 @@
+usb_uart:
+  - id: uart_0
+    type: cdc_acm
+    vid: 0x1234
+    pid: 0x5678
+    channels:
+      - id: channel_0_1
+  - id: uart_1
+    type: cp210x
+    channels:
+      - id: channel_1_1
+        baud_rate: 115200
+        stop_bits: 2
+        data_bits: 7
+        parity: even
+  - id: uart_2
+    type: ch34x
+    channels:
+      - id: channel_2_1
+        baud_rate: 115200
+      - id: channel_2_2
+        baud_rate: 9600
+  - id: uart_3
+    type: ch340
+    channels:
+      - id: channel_3_1
+        baud_rate: 57600
+  - id: uart_4
+    type: esp_jtag
+    channels:
+      - id: channel_4_1
+        debug: true
+        dummy_receiver: true

tests/components/usb_uart/test.esp32-s3-idf.yaml

@@ -0,0 +1 @@
+!include common.yaml