[CI] Consolidate some tests (F) (#8195)

tests/components/fingerprint_grow/common.yaml

@@ -0,0 +1,56 @@
+esphome:
+  on_boot:
+    then:
+      - fingerprint_grow.enroll:
+          finger_id: 2
+          num_scans: 2
+      - fingerprint_grow.cancel_enroll:
+      - fingerprint_grow.delete:
+          finger_id: 2
+      - fingerprint_grow.delete_all:
+
+uart:
+  - id: uart_fingerprint_grow
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 57600
+
+fingerprint_grow:
+  sensing_pin: ${sensing_pin}
+  password: 0x12FE37DC
+  new_password: 0xA65B9840
+  on_finger_scan_start:
+    - logger.log: test_fingerprint_grow_finger_scan_start
+  on_finger_scan_invalid:
+    - logger.log: test_fingerprint_grow_finger_scan_invalid
+  on_finger_scan_matched:
+    - logger.log: test_fingerprint_grow_finger_scan_matched
+  on_finger_scan_unmatched:
+    - logger.log: test_fingerprint_grow_finger_scan_unmatched
+  on_finger_scan_misplaced:
+    - logger.log: test_fingerprint_grow_finger_scan_misplaced
+  on_enrollment_scan:
+    - logger.log: test_fingerprint_grow_enrollment_scan
+  on_enrollment_done:
+    - logger.log: test_fingerprint_grow_node_enrollment_done
+  on_enrollment_failed:
+    - logger.log: test_fingerprint_grow_enrollment_failed
+
+binary_sensor:
+  - platform: fingerprint_grow
+    name: Fingerprint Enrolling
+
+sensor:
+  - platform: fingerprint_grow
+    fingerprint_count:
+      name: Fingerprint Count
+    status:
+      name: Fingerprint Status
+    capacity:
+      name: Fingerprint Capacity
+    security_level:
+      name: Fingerprint Security Level
+    last_finger_id:
+      name: Fingerprint Last Finger ID
+    last_confidence:
+      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.esp32-ard.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO12
-    then:
+  rx_pin: GPIO14
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO15
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 17
-    rx_pin: 16
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 18
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.esp32-c3-ard.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO4
-    then:
+  rx_pin: GPIO5
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO6
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 4
-    rx_pin: 5
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 6
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.esp32-c3-idf.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO4
-    then:
+  rx_pin: GPIO5
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO6
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 4
-    rx_pin: 5
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 6
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.esp32-idf.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO12
-    then:
+  rx_pin: GPIO14
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO15
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 17
-    rx_pin: 16
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 18
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.esp8266-ard.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO4
-    then:
+  rx_pin: GPIO5
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO15
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 4
-    rx_pin: 5
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 16
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fingerprint_grow/test.rp2040-ard.yaml

@@ -1,56 +1,6 @@
-esphome:
+substitutions:
-  on_boot:
+  tx_pin: GPIO4
-    then:
+  rx_pin: GPIO5
-      - fingerprint_grow.enroll:
+  sensing_pin: GPIO6
-          finger_id: 2
-          num_scans: 2
-      - fingerprint_grow.cancel_enroll:
-      - fingerprint_grow.delete:
-          finger_id: 2
-      - fingerprint_grow.delete_all:
 
-uart:
+<<: !include common.yaml
-  - id: uart_fingerprint_grow
-    tx_pin: 4
-    rx_pin: 5
-    baud_rate: 57600
-
-fingerprint_grow:
-  sensing_pin: 6
-  password: 0x12FE37DC
-  new_password: 0xA65B9840
-  on_finger_scan_start:
-    - logger.log: test_fingerprint_grow_finger_scan_start
-  on_finger_scan_invalid:
-    - logger.log: test_fingerprint_grow_finger_scan_invalid
-  on_finger_scan_matched:
-    - logger.log: test_fingerprint_grow_finger_scan_matched
-  on_finger_scan_unmatched:
-    - logger.log: test_fingerprint_grow_finger_scan_unmatched
-  on_finger_scan_misplaced:
-    - logger.log: test_fingerprint_grow_finger_scan_misplaced
-  on_enrollment_scan:
-    - logger.log: test_fingerprint_grow_enrollment_scan
-  on_enrollment_done:
-    - logger.log: test_fingerprint_grow_node_enrollment_done
-  on_enrollment_failed:
-    - logger.log: test_fingerprint_grow_enrollment_failed
-
-binary_sensor:
-  - platform: fingerprint_grow
-    name: Fingerprint Enrolling
-
-sensor:
-  - platform: fingerprint_grow
-    fingerprint_count:
-      name: Fingerprint Count
-    status:
-      name: Fingerprint Status
-    capacity:
-      name: Fingerprint Capacity
-    security_level:
-      name: Fingerprint Security Level
-    last_finger_id:
-      name: Fingerprint Last Finger ID
-    last_confidence:
-      name: Fingerprint Last Confidence

tests/components/fs3000/common.yaml

@@ -0,0 +1,10 @@
+i2c:
+  - id: i2c_fs3000
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: fs3000
+    name: Air Velocity
+    model: 1005
+    update_interval: 60s

tests/components/fs3000/test.esp32-ard.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/fs3000/test.esp32-c3-ard.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/fs3000/test.esp32-c3-idf.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/fs3000/test.esp32-idf.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/fs3000/test.esp8266-ard.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/fs3000/test.rp2040-ard.yaml

@@ -1,10 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_fs3000
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-sensor:
+<<: !include common.yaml
-  - platform: fs3000
-    name: Air Velocity
-    model: 1005
-    update_interval: 60s

tests/components/ft5x06/common.yaml

@@ -0,0 +1,21 @@
+i2c:
+  - id: i2c_ft5x06
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: ${reset_pin}
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: ft5x06
+    on_touch:
+      - logger.log:
+          format: Touch at (%d, %d)
+          args: [touch.x, touch.y]

tests/components/ft5x06/test.esp32-ard.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 18
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft5x06/test.esp32-c3-ard.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft5x06/test.esp32-c3-idf.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft5x06/test.esp32-idf.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 18
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft5x06/test.esp8266-ard.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft5x06/test.rp2040-ard.yaml

@@ -1,21 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_ft5x06
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft5x06
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft63x6/common.yaml

@@ -0,0 +1,36 @@
+spi:
+  - id: spi_ft63x6
+    clk_pin: ${clk_pin}
+    mosi_pin: ${mosi_pin}
+
+i2c:
+  - id: i2c_ft63x6
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: ${reset_pin}
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+touchscreen:
+  - platform: ft63x6
+    interrupt_pin: ${interrupt_pin}
+    transform:
+      swap_xy: true
+      mirror_x: false
+      mirror_y: true
+    on_touch:
+      - logger.log:
+          format: tp touched
+    on_update:
+      - logger.log:
+          format: to updated
+    on_release:
+      - logger.log:
+          format: to released

tests/components/ft63x6/test.esp32-ard.yaml

@@ -1,39 +1,9 @@
-spi:
+substitutions:
-  clk_pin: 14
+  clk_pin: GPIO0
-  mosi_pin: 13
+  mosi_pin: GPIO2
+  scl_pin: GPIO13
+  sda_pin: GPIO14
+  interrupt_pin: GPIO15
+  reset_pin: GPIO16
 
-i2c:
+<<: !include common.yaml
-  sda: GPIO18
-  scl: GPIO19
-
-display:
-  - id: my_display
-    platform: ili9xxx
-    dimensions: 480x320
-    model: ST7796
-    cs_pin: 15
-    dc_pin: 21
-    reset_pin: 22
-    transform:
-      swap_xy: true
-      mirror_x: true
-      mirror_y: true
-    auto_clear_enabled: false
-    invert_colors: false
-
-touchscreen:
-  - platform: ft63x6
-    interrupt_pin: GPIO39
-    transform:
-      swap_xy: true
-      mirror_x: false
-      mirror_y: true
-    on_touch:
-      - logger.log:
-          format: tp touched
-    on_update:
-      - logger.log:
-          format: to updated
-    on_release:
-      - logger.log:
-          format: to released

tests/components/ft63x6/test.esp32-c3-ard.yaml

@@ -1,21 +1,9 @@
-i2c:
+substitutions:
-  - id: i2c_ft63x6
+  clk_pin: GPIO6
-    scl: 5
+  mosi_pin: GPIO7
-    sda: 4
+  scl_pin: GPIO0
+  sda_pin: GPIO1
+  interrupt_pin: GPIO2
+  reset_pin: GPIO3
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft63x6
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft63x6/test.esp32-c3-idf.yaml

@@ -1,21 +1,9 @@
-i2c:
+substitutions:
-  - id: i2c_ft63x6
+  clk_pin: GPIO6
-    scl: 5
+  mosi_pin: GPIO7
-    sda: 4
+  scl_pin: GPIO0
+  sda_pin: GPIO1
+  interrupt_pin: GPIO2
+  reset_pin: GPIO3
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft63x6
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft63x6/test.esp32-idf.yaml

@@ -1,21 +1,9 @@
-i2c:
+substitutions:
-  - id: i2c_ft63x6
+  clk_pin: GPIO0
-    scl: 16
+  mosi_pin: GPIO2
-    sda: 17
+  scl_pin: GPIO13
+  sda_pin: GPIO14
+  interrupt_pin: GPIO15
+  reset_pin: GPIO16
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 18
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft63x6
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft63x6/test.esp8266-ard.yaml

@@ -1,21 +1,9 @@
-i2c:
+substitutions:
-  - id: i2c_ft63x6
+  clk_pin: GPIO14
-    scl: 5
+  mosi_pin: GPIO13
-    sda: 4
+  scl_pin: GPIO5
+  sda_pin: GPIO4
+  interrupt_pin: GPIO12
+  reset_pin: GPIO16
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft63x6
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/ft63x6/test.rp2040-ard.yaml

@@ -1,21 +1,9 @@
-i2c:
+substitutions:
-  - id: i2c_ft63x6
+  clk_pin: GPIO6
-    scl: 5
+  mosi_pin: GPIO7
-    sda: 4
+  scl_pin: GPIO0
+  sda_pin: GPIO1
+  interrupt_pin: GPIO2
+  reset_pin: GPIO3
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-touchscreen:
-  - platform: ft63x6
-    on_touch:
-      - logger.log:
-          format: Touch at (%d, %d)
-          args: [touch.x, touch.y]

tests/components/fujitsu_general/common.yaml

@@ -0,0 +1,7 @@
+remote_transmitter:
+  pin: ${pin}
+  carrier_duty_percent: 50%
+
+climate:
+  - platform: fujitsu_general
+    name: Fujitsu General Climate

tests/components/fujitsu_general/test.esp32-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: fujitsu_general
-    name: Fujitsu General Climate

tests/components/fujitsu_general/test.esp32-c3-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: fujitsu_general
-    name: Fujitsu General Climate

tests/components/fujitsu_general/test.esp32-c3-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: fujitsu_general
-    name: Fujitsu General Climate

tests/components/fujitsu_general/test.esp32-idf.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: fujitsu_general
-    name: Fujitsu General Climate

tests/components/fujitsu_general/test.esp8266-ard.yaml

@@ -1,7 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 5
+  pin: GPIO5
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: fujitsu_general
-    name: Fujitsu General Climate