diff --git a/tests/test5.1.yaml b/tests/test5.1.yaml
new file mode 100644
index 0000000000..c25d3b7547
--- /dev/null
+++ b/tests/test5.1.yaml
@@ -0,0 +1,752 @@
+---
+# copy of test5.yaml with gsm network
+esphome:
+  name: test5-1
+  build_path: build/test5-1
+  project:
+    name: esphome.test5_1_project
+    version: "1.0.0"
+
+esp32:
+  board: nodemcu-32s
+  framework:
+    type: esp-idf
+
+gsm:
+  rx_pin: 26
+  tx_pin: 27
+  power_pin: 4
+  flight_pin: 25
+  status_pin: 34
+  dtr_pin: 32
+  model: SIM7600
+  apn: orange
+  username: orange
+  password: orange
+  pin_code: "0000"
+
+logger:
+
+debug:
+
+psram:
+
+uart:
+  - id: uart_1
+    tx_pin: 1
+    rx_pin: 3
+    baud_rate: 9600
+  - id: uart_2
+    tx_pin:
+      allow_other_uses: true
+      number: 17
+      inverted: true
+    rx_pin:
+      allow_other_uses: true
+      number: 16
+    baud_rate: 19200
+
+i2c:
+  sda:
+    allow_other_uses: true
+    number: 21
+  scl:
+    number: 22
+  frequency: 100khz
+
+modbus:
+  uart_id: uart_1
+  flow_control_pin:
+    allow_other_uses: true
+    number: 5
+  id: mod_bus1
+
+modbus_controller:
+  - id: modbus_controller_test
+    address: 0x2
+    modbus_id: mod_bus1
+
+mqtt:
+  broker: test.mosquitto.org
+  port: 1883
+  discovery: true
+  discovery_prefix: homeassistant
+  idf_send_async: false
+  log_topic:
+  on_message:
+    topic: testing/sensor/testing_sensor/state
+    qos: 0
+    then:
+      # yamllint disable rule:line-length
+      - lambda: |-
+          ESP_LOGD("Mqtt Test", "testing/sensor/testing_sensor/state=[%s]", x.c_str());
+      # yamllint enable rule:line-length
+
+vbus:
+  - uart_id: uart_2
+
+binary_sensor:
+  - platform: gpio
+    pin: GPIO0
+    id: io0_button
+    icon: mdi:gesture-tap-button
+
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_binsensortest
+    register_type: read
+    address: 0x3200
+    bitmask: 0x80 # (bit 8)
+    lambda: "return x;"
+
+  - platform: tm1638
+    id: Button0
+    key: 0
+    filters:
+      - delayed_on: 10ms
+    on_press:
+      then:
+        - switch.turn_on: Led0
+    on_release:
+      then:
+        - switch.turn_off: Led0
+
+  - platform: tm1638
+    id: Button1
+    key: 1
+    on_press:
+      then:
+        - switch.turn_on: Led1
+    on_release:
+      then:
+        - switch.turn_off: Led1
+
+  - platform: tm1638
+    id: Button2
+    key: 2
+    on_press:
+      then:
+        - switch.turn_on: Led2
+    on_release:
+      then:
+        - switch.turn_off: Led2
+
+  - platform: tm1638
+    id: Button3
+    key: 3
+    on_press:
+      then:
+        - switch.turn_on: Led3
+    on_release:
+      then:
+        - switch.turn_off: Led3
+
+  - platform: tm1638
+    id: Button4
+    key: 4
+    on_press:
+      then:
+        - output.turn_on: Led4
+    on_release:
+      then:
+        - output.turn_off: Led4
+
+  - platform: tm1638
+    id: Button5
+    key: 5
+    on_press:
+      then:
+        - output.turn_on: Led5
+    on_release:
+      then:
+        - output.turn_off: Led5
+
+  - platform: tm1638
+    id: Button6
+    key: 6
+    on_press:
+      then:
+        - output.turn_on: Led6
+    on_release:
+      then:
+        - output.turn_off: Led6
+
+  - platform: tm1638
+    id: Button7
+    key: 7
+    on_press:
+      then:
+        - output.turn_on: Led7
+    on_release:
+      then:
+        - output.turn_off: Led7
+
+  - platform: gpio
+    id: sn74hc165_pin_0
+    pin:
+      sn74hc165: sn74hc165_hub
+      number: 0
+
+  - platform: ezo_pmp
+    pump_state:
+      name: "Pump State"
+    is_paused:
+      name: "Is Paused"
+
+  - platform: matrix_keypad
+    keypad_id: keypad
+    id: key4
+    row: 1
+    col: 1
+  - platform: matrix_keypad
+    id: key1
+    key: 1
+
+  - platform: vbus
+    model: deltasol_bs_plus
+    relay2:
+      name: Relay 2 On
+    sensor1_error:
+      name: Sensor 1 Error
+
+  - platform: vbus
+    model: custom
+    command: 0x100
+    source: 0x1234
+    dest: 0x10
+    binary_sensors:
+      - id: vcustom_b
+        name: VBus Custom Binary Sensor
+        lambda: return x[0] & 1;
+
+tlc5947:
+  data_pin:
+    number: GPIO12
+    allow_other_uses: true
+  clock_pin:
+    allow_other_uses: true
+    number: GPIO14
+  lat_pin:
+    allow_other_uses: true
+    number: GPIO15
+
+gp8403:
+  - id: gp8403_5v
+    voltage: 5V
+  - id: gp8403_10v
+    voltage: 10V
+
+output:
+  - platform: gpio
+    pin: GPIO2
+    id: built_in_led
+
+  - platform: tlc5947
+    id: output_red
+    channel: 0
+    max_power: 0.8
+
+  - platform: mcp47a1
+    id: output_mcp47a1
+
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_output_test
+    lambda: |-
+      return x * 1.0 ;
+    address: 0x9001
+    value_type: U_WORD
+
+  - platform: tm1638
+    id: Led4
+    led: 4
+
+  - platform: tm1638
+    id: Led5
+    led: 5
+
+  - platform: tm1638
+    id: Led6
+    led: 6
+
+  - platform: tm1638
+    id: Led7
+    led: 7
+
+  - platform: gp8403
+    id: gp8403_output_0
+    gp8403_id: gp8403_5v
+    channel: 0
+  - platform: gp8403
+    gp8403_id: gp8403_10v
+    id: gp8403_output_1
+    channel: 1
+
+demo:
+
+esp32_ble:
+
+esp32_ble_server:
+  manufacturer: ESPHome
+  model: Test5
+
+# require wifi
+#esp32_improv:
+#  authorizer: io0_button
+#  authorized_duration: 1min
+#  status_indicator: built_in_led
+
+ezo_pmp:
+  id: hcl_pump
+  update_interval: 1s
+
+number:
+  - platform: template
+    name: My template number
+    id: template_number_id
+    optimistic: true
+    max_value: 100
+    min_value: 0
+    step: 5
+    unit_of_measurement: "%"
+    mode: slider
+    device_class: humidity
+    on_value:
+      - logger.log:
+          format: Number changed to %f
+          args: [x]
+    set_action:
+      - logger.log:
+          format: Template Number set to %f
+          args: [x]
+      - number.set:
+          id: template_number_id
+          value: 50
+      - number.to_min: template_number_id
+      - number.to_min:
+          id: template_number_id
+      - number.to_max: template_number_id
+      - number.to_max:
+          id: template_number_id
+      - number.increment: template_number_id
+      - number.increment:
+          id: template_number_id
+          cycle: false
+      - number.decrement: template_number_id
+      - number.decrement:
+          id: template_number_id
+          cycle: false
+      - number.operation:
+          id: template_number_id
+          operation: Increment
+          cycle: false
+      - number.operation:
+          id: template_number_id
+          operation: !lambda "return NUMBER_OP_INCREMENT;"
+          cycle: !lambda "return false;"
+
+  - id: modbus_numbertest
+    platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    name: ModbusNumber
+    address: 0x9002
+    value_type: U_WORD
+    lambda: "return  x * 1.0;"
+    write_lambda: |-
+      return x * 1.0 ;
+    multiply: 1.0
+
+select:
+  - platform: template
+    name: My template select
+    id: template_select_id
+    optimistic: true
+    initial_option: two
+    restore_value: true
+    on_value:
+      - logger.log:
+          format: Select changed to %s (index %d)"
+          args: ["x.c_str()", "i"]
+    set_action:
+      - logger.log:
+          format: Template Select set to %s
+          args: ["x.c_str()"]
+      - select.set:
+          id: template_select_id
+          option: two
+      - select.first: template_select_id
+      - select.last:
+          id: template_select_id
+      - select.previous: template_select_id
+      - select.next:
+          id: template_select_id
+          cycle: false
+      - select.operation:
+          id: template_select_id
+          operation: Previous
+          cycle: false
+      - select.operation:
+          id: template_select_id
+          operation: !lambda "return SELECT_OP_PREVIOUS;"
+          cycle: !lambda "return true;"
+      - select.set_index:
+          id: template_select_id
+          index: 1
+      - select.set_index:
+          id: template_select_id
+          index: !lambda "return 1 + 1;"
+    options:
+      - one
+      - two
+      - three
+
+  - platform: modbus_controller
+    name: Modbus Select Register 1000
+    address: 1000
+    value_type: U_WORD
+    optionsmap:
+      "Zero": 0
+      "One": 1
+      "Two": 2
+      "Three": 3
+
+sensor:
+  - platform: adc
+    id: adc_sensor_p32
+    name: ADC pin 32
+    pin: 32
+    attenuation: 11db
+    update_interval: 1s
+  - platform: internal_temperature
+    name: Internal Temperature
+    state_topic:
+  - platform: selec_meter
+    total_active_energy:
+      name: SelecEM2M Total Active Energy
+    import_active_energy:
+      name: SelecEM2M Import Active Energy
+    export_active_energy:
+      name: SelecEM2M Export Active Energy
+    total_reactive_energy:
+      name: SelecEM2M Total Reactive Energy
+    import_reactive_energy:
+      name: SelecEM2M Import Reactive Energy
+    export_reactive_energy:
+      name: SelecEM2M Export Reactive Energy
+    apparent_energy:
+      name: SelecEM2M Apparent Energy
+    active_power:
+      name: SelecEM2M Active Power
+    reactive_power:
+      name: SelecEM2M Reactive Power
+    apparent_power:
+      name: SelecEM2M Apparent Power
+    voltage:
+      name: SelecEM2M Voltage
+    current:
+      name: SelecEM2M Current
+    power_factor:
+      name: SelecEM2M Power Factor
+    frequency:
+      name: SelecEM2M Frequency
+    maximum_demand_active_power:
+      name: SelecEM2M Maximum Demand Active Power
+      disabled_by_default: true
+    maximum_demand_reactive_power:
+      name: SelecEM2M Maximum Demand Reactive Power
+      disabled_by_default: true
+    maximum_demand_apparent_power:
+      name: SelecEM2M Maximum Demand Apparent Power
+      disabled_by_default: true
+
+  - id: modbus_sensortest
+    platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    address: 0x331A
+    register_type: read
+    value_type: U_WORD
+
+  - platform: t6615
+    uart_id: uart_2
+    co2:
+      name: CO2 Sensor
+
+  - platform: bmp3xx
+    temperature:
+      name: BMP Temperature
+      oversampling: 16x
+    pressure:
+      name: BMP Pressure
+    address: 0x77
+    iir_filter: 2X
+
+  - platform: ms8607
+    temperature:
+      name: Temperature
+    humidity:
+      name: Humidity
+    pressure:
+      name: Pressure
+  - platform: ms8607
+    id: ms8607_more_config
+    temperature:
+      name: Indoor Temperature
+      accuracy_decimals: 1
+    pressure:
+      name: Indoor Pressure
+      internal: true
+    humidity:
+      name: Indoor Humidity
+      address: 0x41
+      i2c_id:
+    i2c_id:
+    address: 0x77
+    update_interval: 10min
+
+  - platform: sen5x
+    id: sen54
+    temperature:
+      name: Temperature
+      accuracy_decimals: 1
+    humidity:
+      name: Humidity
+      accuracy_decimals: 0
+    pm_1_0:
+      name: PM <1µm Weight concentration
+      id: pm_1_0
+      accuracy_decimals: 1
+    pm_2_5:
+      name: PM <2.5µm Weight concentration
+      id: pm_2_5
+      accuracy_decimals: 1
+    pm_4_0:
+      name: PM <4µm Weight concentration
+      id: pm_4_0
+      accuracy_decimals: 1
+    pm_10_0:
+      name: PM <10µm Weight concentration
+      id: pm_10_0
+      accuracy_decimals: 1
+    nox:
+      name: NOx
+    voc:
+      name: VOC
+      algorithm_tuning:
+        index_offset: 100
+        learning_time_offset_hours: 12
+        learning_time_gain_hours: 12
+        gating_max_duration_minutes: 180
+        std_initial: 50
+        gain_factor: 230
+    temperature_compensation:
+      offset: 0
+      normalized_offset_slope: 0
+      time_constant: 0
+    auto_cleaning_interval: 604800s
+    acceleration_mode: low
+    store_baseline: true
+    address: 0x69
+  - platform: mcp9600
+    thermocouple_type: K
+    hot_junction:
+      name: Thermocouple Temperature
+    cold_junction:
+      name: Ambient Temperature
+
+  - platform: ezo_pmp
+    current_volume_dosed:
+      name: Current Volume Dosed
+    total_volume_dosed:
+      name: Total Volume Dosed
+    absolute_total_volume_dosed:
+      name: Absolute Total Volume Dosed
+    pump_voltage:
+      name: Pump Voltage
+    last_volume_requested:
+      name: Last Volume Requested
+    max_flow_rate:
+      name: Max Flow Rate
+
+  - platform: vbus
+    model: deltasol c
+    temperature_3:
+      name: Temperature 3
+    operating_hours_1:
+      name: Operating Hours 1
+    heat_quantity:
+      name: Heat Quantity
+    time:
+      name: System Time
+
+  - platform: debug
+    free:
+      name: "Heap Free"
+    block:
+      name: "Heap Max Block"
+    loop_time:
+      name: "Loop Time"
+    psram:
+      name: "PSRAM Free"
+
+  - platform: vbus
+    model: custom
+    command: 0x100
+    source: 0x1234
+    dest: 0x10
+    sensors:
+      - id: vcustom
+        name: VBus Custom Sensor
+        lambda: return x[0] / 10.0;
+
+  - platform: kuntze
+    ph:
+      name: Kuntze pH
+    temperature:
+      name: Kuntze temperature
+
+script:
+  - id: automation_test
+    then:
+      - repeat:
+          count: 5
+          then:
+            - logger.log: looping!
+
+  - id: zero_repeat_test
+    then:
+      - repeat:
+          count: !lambda "return 0;"
+          then:
+            - logger.log: shouldn't see me!
+
+switch:
+  - platform: modbus_controller
+    modbus_controller_id: modbus_controller_test
+    id: modbus_switch_test
+    register_type: coil
+    address: 2
+    bitmask: 1
+
+  - platform: tm1638
+    id: Led0
+    led: 0
+    name: TM1638Led0
+
+  - platform: tm1638
+    id: Led1
+    led: 1
+    name: TM1638Led1
+
+  - platform: tm1638
+    id: Led2
+    led: 2
+    name: TM1638Led2
+
+  - platform: tm1638
+    id: Led3
+    led: 3
+    name: TM1638Led3
+
+display:
+  - platform: tm1638
+    id: primarydisplay
+    stb_pin:
+      allow_other_uses: true
+      number: 5 # TM1638 STB
+    clk_pin: 18 # TM1638 CLK
+    dio_pin: 23 # TM1638 DIO
+    update_interval: 5s
+    intensity: 5
+    lambda: |-
+      it.print("81818181");
+
+time:
+  - platform: pcf85063
+  - platform: pcf8563
+
+text_sensor:
+  - platform: ezo_pmp
+    dosing_mode:
+      name: Dosing Mode
+    calibration_status:
+      name: Calibration Status
+      on_value:
+        - ezo_pmp.dose_volume:
+            id: hcl_pump
+            volume: 10
+        - ezo_pmp.dose_volume_over_time:
+            id: hcl_pump
+            volume: 10
+            duration: 2
+        - ezo_pmp.dose_with_constant_flow_rate:
+            id: hcl_pump
+            volume_per_minute: 10
+            duration: 2
+        - ezo_pmp.set_calibration_volume:
+            id: hcl_pump
+            volume: 10
+        - ezo_pmp.find: hcl_pump
+        - ezo_pmp.dose_continuously: hcl_pump
+        - ezo_pmp.clear_total_volume_dosed: hcl_pump
+        - ezo_pmp.clear_calibration: hcl_pump
+        - ezo_pmp.pause_dosing: hcl_pump
+        - ezo_pmp.stop_dosing: hcl_pump
+        - ezo_pmp.arbitrary_command:
+            id: hcl_pump
+            command: D,?
+
+sn74hc165:
+  id: sn74hc165_hub
+  data_pin:
+    allow_other_uses: true
+    number: GPIO12
+  clock_pin:
+    allow_other_uses: true
+    number: GPIO14
+  load_pin: GPIO27
+  clock_inhibit_pin: GPIO26
+  sr_count: 4
+
+matrix_keypad:
+  id: keypad
+  rows:
+    - pin:
+        allow_other_uses: true
+        number: 21
+    - pin: 19
+  columns:
+    - pin:
+        allow_other_uses: true
+        number: 17
+    - pin:
+        allow_other_uses: true
+        number: 16
+  keys: "1234"
+  has_pulldowns: true
+
+key_collector:
+  - id: reader
+    source_id: keypad
+    min_length: 4
+    max_length: 4
+
+light:
+  - platform: esp32_rmt_led_strip
+    id: led_strip
+    pin: 13
+    num_leds: 60
+    rmt_channel: 6
+    rgb_order: GRB
+    chipset: ws2812
+  - platform: esp32_rmt_led_strip
+    id: led_strip2
+    pin:
+      allow_other_uses: true
+      number: 15
+    num_leds: 60
+    rmt_channel: 2
+    rgb_order: RGB
+    bit0_high: 100us
+    bit0_low: 100us
+    bit1_high: 100us
+    bit1_low: 100us