[adc] Use new library with ESP-IDF v5 (#9021)

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

esphome/components/adc/adc_sensor.h

@@ -3,12 +3,15 @@
 #include "esphome/components/sensor/sensor.h"
 #include "esphome/components/voltage_sampler/voltage_sampler.h"
 #include "esphome/core/component.h"
+#include "esphome/core/defines.h"
 #include "esphome/core/hal.h"
 
 #ifdef USE_ESP32
-#include <esp_adc_cal.h>
-#include "driver/adc.h"
-#endif  // USE_ESP32
+#include "esp_adc/adc_cali.h"
+#include "esp_adc/adc_cali_scheme.h"
+#include "esp_adc/adc_oneshot.h"
+#include "hal/adc_types.h"  // This defines ADC_CHANNEL_MAX
+#endif                      // USE_ESP32
 
 namespace esphome {
 namespace adc {
@@ -49,33 +52,72 @@ class Aggregator {
 
 class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage_sampler::VoltageSampler {
  public:
+  /// Update the sensor's state by reading the current ADC value.
+  /// This method is called periodically based on the update interval.
+  void update() override;
+
+  /// Set up the ADC sensor by initializing hardware and calibration parameters.
+  /// This method is called once during device initialization.
+  void setup() override;
+
+  /// Output the configuration details of the ADC sensor for debugging purposes.
+  /// This method is called during the ESPHome setup process to log the configuration.
+  void dump_config() override;
+
+  /// Return the setup priority for this component.
+  /// Components with higher priority are initialized earlier during setup.
+  /// @return A float representing the setup priority.
+  float get_setup_priority() const override;
+
+  /// Set the GPIO pin to be used by the ADC sensor.
+  /// @param pin Pointer to an InternalGPIOPin representing the ADC input pin.
+  void set_pin(InternalGPIOPin *pin) { this->pin_ = pin; }
+
+  /// Enable or disable the output of raw ADC values (unprocessed data).
+  /// @param output_raw Boolean indicating whether to output raw ADC values (true) or processed values (false).
+  void set_output_raw(bool output_raw) { this->output_raw_ = output_raw; }
+
+  /// Set the number of samples to be taken for ADC readings to improve accuracy.
+  /// A higher sample count reduces noise but increases the reading time.
+  /// @param sample_count The number of samples (e.g., 1, 4, 8).
+  void set_sample_count(uint8_t sample_count);
+
+  /// Set the sampling mode for how multiple ADC samples are combined into a single measurement.
+  ///
+  /// When multiple samples are taken (controlled by set_sample_count), they can be combined
+  /// in one of three ways:
+  ///   - SamplingMode::AVG: Compute the average (default)
+  ///   - SamplingMode::MIN: Use the lowest sample value
+  ///   - SamplingMode::MAX: Use the highest sample value
+  /// @param sampling_mode The desired sampling mode to use for aggregating ADC samples.
+  void set_sampling_mode(SamplingMode sampling_mode);
+
+  /// Perform a single ADC sampling operation and return the measured value.
+  /// This function handles raw readings, calibration, and averaging as needed.
+  /// @return The sampled value as a float.
+  float sample() override;
+
 #ifdef USE_ESP32
-  /// Set the attenuation for this pin. Only available on the ESP32.
+  /// Set the ADC attenuation level to adjust the input voltage range.
+  /// This determines how the ADC interprets input voltages, allowing for greater precision
+  /// or the ability to measure higher voltages depending on the chosen attenuation level.
+  /// @param attenuation The desired ADC attenuation level (e.g., ADC_ATTEN_DB_0, ADC_ATTEN_DB_11).
   void set_attenuation(adc_atten_t attenuation) { this->attenuation_ = attenuation; }
-  void set_channel1(adc1_channel_t channel) {
-    this->channel1_ = channel;
-    this->channel2_ = ADC2_CHANNEL_MAX;
-  }
-  void set_channel2(adc2_channel_t channel) {
-    this->channel2_ = channel;
-    this->channel1_ = ADC1_CHANNEL_MAX;
+
+  /// Configure the ADC to use a specific channel on ADC1.
+  /// This sets the channel for single-shot or continuous ADC measurements.
+  /// @param channel The ADC1 channel to configure, such as ADC_CHANNEL_0, ADC_CHANNEL_3, etc.
+  void set_channel(adc_unit_t unit, adc_channel_t channel) {
+    this->adc_unit_ = unit;
+    this->channel_ = channel;
   }
+
+  /// Set whether autoranging should be enabled for the ADC.
+  /// Autoranging automatically adjusts the attenuation level to handle a wide range of input voltages.
+  /// @param autorange Boolean indicating whether to enable autoranging.
   void set_autorange(bool autorange) { this->autorange_ = autorange; }
 #endif  // USE_ESP32
 
-  /// Update ADC values
-  void update() override;
-  /// Setup ADC
-  void setup() override;
-  void dump_config() override;
-  /// `HARDWARE_LATE` setup priority
-  float get_setup_priority() const override;
-  void set_pin(InternalGPIOPin *pin) { this->pin_ = pin; }
-  void set_output_raw(bool output_raw) { this->output_raw_ = output_raw; }
-  void set_sample_count(uint8_t sample_count);
-  void set_sampling_mode(SamplingMode sampling_mode);
-  float sample() override;
-
 #ifdef USE_ESP8266
   std::string unique_id() override;
 #endif  // USE_ESP8266
@@ -90,17 +132,28 @@ class ADCSensor : public sensor::Sensor, public PollingComponent, public voltage
   InternalGPIOPin *pin_;
   SamplingMode sampling_mode_{SamplingMode::AVG};
 
+#ifdef USE_ESP32
+  float sample_autorange_();
+  float sample_fixed_attenuation_();
+  bool autorange_{false};
+  adc_oneshot_unit_handle_t adc_handle_{nullptr};
+  adc_cali_handle_t calibration_handle_{nullptr};
+  adc_atten_t attenuation_{ADC_ATTEN_DB_0};
+  adc_channel_t channel_;
+  adc_unit_t adc_unit_;
+  struct SetupFlags {
+    uint8_t init_complete : 1;
+    uint8_t config_complete : 1;
+    uint8_t handle_init_complete : 1;
+    uint8_t calibration_complete : 1;
+    uint8_t reserved : 4;
+  } setup_flags_{};
+  static adc_oneshot_unit_handle_t shared_adc_handles[2];
+#endif  // USE_ESP32
+
 #ifdef USE_RP2040
   bool is_temperature_{false};
 #endif  // USE_RP2040
-
-#ifdef USE_ESP32
-  adc_atten_t attenuation_{ADC_ATTEN_DB_0};
-  adc1_channel_t channel1_{ADC1_CHANNEL_MAX};
-  adc2_channel_t channel2_{ADC2_CHANNEL_MAX};
-  bool autorange_{false};
-  esp_adc_cal_characteristics_t cal_characteristics_[SOC_ADC_ATTEN_NUM] = {};
-#endif  // USE_ESP32
 };
 
 }  // namespace adc