sascha/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-10-31 15:12:06 +00:00
Code Issues Releases Wiki Activity

[pmwcs3] Optimize logging (#8936)

Browse Source
This commit is contained in:
Keith Burzinski
2025-05-28 18:44:03 -05:00
committed by GitHub
parent 70c5e1bbf1
commit 51981335d5
2 changed files with 9 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
esphome/components/pmwcs3/pmwcs3.cpp
View File

@@ -26,33 +26,31 @@ static const char *const TAG = "pmwcs3";
void PMWCS3Component::new_i2c_address(uint8_t address) {
if (!this->write_byte(PMWCS3_SET_I2C_ADDRESS, address)) {
this->status_set_warning();
ESP_LOGW(TAG, "couldn't write the new I2C address %d", address);
ESP_LOGW(TAG, "Setting I2C address failed (%d)", address);
return;
}
this->set_i2c_address(address); // Allows device to continue working until new firmware is written with new address.
ESP_LOGVV(TAG, "changed I2C address to %d", address);
ESP_LOGVV(TAG, "Set I2C address to %d", address);
this->status_clear_warning();
}
void PMWCS3Component::air_calibration() {
if (!this->write_bytes(PMWCS3_REG_CALIBRATE_AIR, nullptr, 0)) {
this->status_set_warning();
ESP_LOGW(TAG, "couldn't start air calibration");
ESP_LOGW(TAG, "Starting air calibration failed");
return;
}
ESP_LOGW(TAG, "Start air calibration during the next 300s");
ESP_LOGW(TAG, "Running air calibration for 300s");
}
void PMWCS3Component::water_calibration() {
if (!this->write_bytes(PMWCS3_REG_CALIBRATE_WATER, nullptr, 0)) {
this->status_set_warning();
ESP_LOGW(TAG, "couldn't start water calibration");
ESP_LOGW(TAG, "Starting water calibration failed");
return;
}
ESP_LOGW(TAG, "Start water calibration during the next 300s");
ESP_LOGW(TAG, "Running water calibration for 300s");
}
void PMWCS3Component::setup() { ESP_LOGCONFIG(TAG, "Running setup"); }
void PMWCS3Component::update() { this->read_data_(); }
float PMWCS3Component::get_setup_priority() const { return setup_priority::DATA; }
@@ -61,10 +59,8 @@ void PMWCS3Component::dump_config() {
ESP_LOGCONFIG(TAG, "PMWCS3");
LOG_I2C_DEVICE(this);
if (this->is_failed()) {
ESP_LOGE(TAG, "Communication with PMWCS3 failed!");
ESP_LOGE(TAG, "Communication failed");
}
ESP_LOGI(TAG, "%s", this->is_failed() ? "FAILED" : "OK");
LOG_UPDATE_INTERVAL(this);
LOG_SENSOR(" ", "e25", this->e25_sensor_);
LOG_SENSOR(" ", "ec", this->ec_sensor_);
@@ -75,7 +71,7 @@ void PMWCS3Component::read_data_() {
/////// Super important !!!! first activate reading PMWCS3_REG_READ_START (if not, return always the same values) ////
if (!this->write_bytes(PMWCS3_REG_READ_START, nullptr, 0)) {
this->status_set_warning();
ESP_LOGVV(TAG, "Failed to write into REG_READ_START register !!!");
ESP_LOGVV(TAG, "Writing REG_READ_START failed");
return;
}
@@ -85,7 +81,7 @@ void PMWCS3Component::read_data_() {
uint8_t data[8];
float e25, ec, temperature, vwc;
if (!this->read_bytes(PMWCS3_REG_GET_DATA, (uint8_t *) &data, 8)) {
ESP_LOGVV(TAG, "Error reading PMWCS3_REG_GET_DATA registers");
ESP_LOGVV(TAG, "Reading PMWCS3_REG_GET_DATA failed");
this->mark_failed();
return;
}

1
esphome/components/pmwcs3/pmwcs3.h
View File

@@ -12,7 +12,6 @@ namespace pmwcs3 {
class PMWCS3Component : public PollingComponent, public i2c::I2CDevice {
public:
void setup() override;
void update() override;
void dump_config() override;
float get_setup_priority() const override;