Automation API & Cleanup

esphomeyaml/const.py

@@ -34,6 +34,13 @@ CONF_USERNAME = 'username'
 CONF_POWER_SUPPLY = 'power_supply'
 CONF_ID = 'id'
 CONF_MQTT_ID = 'mqtt_id'
+CONF_SENSOR_ID = 'sensor_id'
+CONF_TRIGGER_ID = 'trigger_id'
+CONF_ACTION_ID = 'action_id'
+CONF_CONDITION_ID = 'condition_id'
+CONF_MAKE_ID = 'make_id'
+CONF_AUTOMATION_ID = 'automation_id'
+CONF_DELAY = 'delay'
 CONF_PIN = 'pin'
 CONF_NUMBER = 'number'
 CONF_INVERTED = 'inverted'
@@ -70,6 +77,15 @@ CONF_TOPIC = 'topic'
 CONF_PAYLOAD_AVAILABLE = 'payload_available'
 CONF_PAYLOAD_NOT_AVAILABLE = 'payload_not_available'
 CONF_DEFAULT_TRANSITION_LENGTH = 'default_transition_length'
+CONF_TRANSITION_LENGTH = 'transition_length'
+CONF_FLASH_LENGTH = 'flash_length'
+CONF_BRIGHTNESS = 'brightness'
+CONF_EFFECT = 'effect'
+CONF_MIN = 'min'
+CONF_MAX = 'max'
+CONF_ON = 'on'
+CONF_IF = 'if'
+CONF_THEN = 'then'
 CONF_BINARY = 'binary'
 CONF_WHITE = 'white'
 CONF_RGBW = 'rgbw'
@@ -112,6 +128,8 @@ CONF_LAMBDA = 'lambda'
 CONF_THROTTLE = 'throttle'
 CONF_DELTA = 'delta'
 CONF_OR = 'or'
+CONF_AND = 'and'
+CONF_RANGE = 'range'
 CONF_UNIQUE = 'unique'
 CONF_HEARTBEAT = 'heartbeat'
 CONF_DEBOUNCE = 'debounce'
@@ -192,6 +210,24 @@ CONF_CLOCK_PIN = 'clock_pin'
 CONF_RGB_ORDER = 'rgb_order'
 CONF_ACCURACY = 'accuracy'
 CONF_BOARD_FLASH_MODE = 'board_flash_mode'
+CONF_ON_PRESS = 'on_press'
+CONF_ON_RELEASE = 'on_release'
+CONF_ON_CLICK = 'on_click'
+CONF_ON_DOUBLE_CLICK = 'on_double_click'
+CONF_MIN_LENGTH = 'min_length'
+CONF_MAX_LENGTH = 'max_length'
+CONF_ON_VALUE = 'on_value'
+CONF_ON_RAW_VALUE = 'on_raw_value'
+CONF_ON_VALUE_RANGE = 'on_value_range'
+CONF_ON_MESSAGE = 'on_message'
+CONF_PIN_CS = 'pin_cs'
+CONF_PIN_CLOCK = 'pin_clock'
+CONF_PIN_MISO = 'pin_miso'
+CONF_TURN_ON_ACTION = 'turn_on_action'
+CONF_TURN_OFF_ACTION = 'turn_off_action'
+CONF_OPEN_ACTION = 'open_action'
+CONF_CLOSE_ACTION = 'close_action'
+CONF_STOP_ACTION = 'stop_action'
 
 ESP32_BOARDS = [
     'featheresp32', 'node32s', 'espea32', 'firebeetle32', 'esp32doit-devkit-v1',