[CI] Consolidate some tests (G) (#8196)

tests/components/gcja5/common.yaml

@@ -0,0 +1,25 @@
+uart:
+  - id: uart_gcja5
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 9600
+    parity: EVEN
+
+sensor:
+  - platform: gcja5
+    pm_1_0:
+      name: "Particulate Matter <1.0µm Concentration"
+    pm_2_5:
+      name: "Particulate Matter <2.5µm Concentration"
+    pm_10_0:
+      name: "Particulate Matter <10.0µm Concentration"
+    pmc_0_5:
+      name: "PMC 0.5"
+    pmc_1_0:
+      name: "PMC 1.0"
+    pmc_2_5:
+      name: "PMC 2.5"
+    pmc_5_0:
+      name: "PMC 5.0"
+    pmc_10_0:
+      name: "PMC 10.0"

tests/components/gcja5/test.esp32-ard.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gcja5/test.esp32-c3-ard.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gcja5/test.esp32-c3-idf.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gcja5/test.esp32-idf.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gcja5/test.esp8266-ard.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gcja5/test.rp2040-ard.yaml

@@ -1,25 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gcja5
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-sensor:
+<<: !include common.yaml
-  - platform: gcja5
-    pm_1_0:
-      name: "Particulate Matter <1.0µm Concentration"
-    pm_2_5:
-      name: "Particulate Matter <2.5µm Concentration"
-    pm_10_0:
-      name: "Particulate Matter <10.0µm Concentration"
-    pmc_0_5:
-      name: "PMC 0.5"
-    pmc_1_0:
-      name: "PMC 1.0"
-    pmc_2_5:
-      name: "PMC 2.5"
-    pmc_5_0:
-      name: "PMC 5.0"
-    pmc_10_0:
-      name: "PMC 10.0"

tests/components/gdk101/common.yaml

@@ -1,11 +1,10 @@
 i2c:
-  id: i2c_bus
+  - id: i2c_gdk101
-  sda: ${i2c_sda}
+    scl: ${scl_pin}
-  scl: ${i2c_scl}
+    sda: ${sda_pin}
 
 gdk101:
   id: my_gdk101
-  i2c_id: i2c_bus
 
 sensor:
   - platform: gdk101

tests/components/gdk101/test.esp32-ard.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  i2c_scl: GPIO16
+  scl_pin: GPIO16
-  i2c_sda: GPIO17
+  sda_pin: GPIO17
 
 <<: !include common.yaml

tests/components/gdk101/test.esp32-idf.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  i2c_scl: GPIO16
+  scl_pin: GPIO16
-  i2c_sda: GPIO17
+  sda_pin: GPIO17
 
 <<: !include common.yaml

tests/components/gdk101/test.esp8266-ard.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  i2c_scl: GPIO5
+  scl_pin: GPIO5
-  i2c_sda: GPIO4
+  sda_pin: GPIO4
 
 <<: !include common.yaml

tests/components/gdk101/test.rp2040-ard.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  i2c_scl: GPIO5
+  scl_pin: GPIO5
-  i2c_sda: GPIO4
+  sda_pin: GPIO4
 
 <<: !include common.yaml

tests/components/gp2y1010au0f/common.yaml

@@ -0,0 +1,15 @@
+sensor:
+  - platform: adc
+    id: adc_sensor
+    pin: ${adc_pin}
+  - platform: gp2y1010au0f
+    sensor: adc_sensor
+    name: Dust Sensor
+    adc_voltage_offset: 0.2
+    adc_voltage_multiplier: 3.3
+    output: dust_sensor_led
+
+output:
+  - platform: gpio
+    id: dust_sensor_led
+    pin: ${output_pin}

tests/components/gp2y1010au0f/test.esp32-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  adc_pin: A0
+  output_pin: GPIO14
+
+<<: !include common.yaml

tests/components/gp2y1010au0f/test.esp32-c3-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  adc_pin: GPIO0
+  output_pin: GPIO1
+
+<<: !include common.yaml

tests/components/gp2y1010au0f/test.esp32-c3-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  adc_pin: GPIO0
+  output_pin: GPIO1
+
+<<: !include common.yaml

tests/components/gp2y1010au0f/test.esp32-idf.yaml

@@ -1,16 +1,5 @@
-sensor:
+substitutions:
-  - platform: adc
+  adc_pin: A0
-    pin: GPIO36
+  output_pin: GPIO14
-    id: adc_sensor
 
-  - platform: gp2y1010au0f
+<<: !include common.yaml
-    sensor: adc_sensor
-    name: Dust Sensor
-    adc_voltage_offset: 0.2
-    adc_voltage_multiplier: 3.3
-    output: dust_sensor_led
-
-output:
-  - platform: gpio
-    id: dust_sensor_led
-    pin: GPIO32

tests/components/gp2y1010au0f/test.esp8266-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  adc_pin: A0
+  output_pin: GPIO5
+
+<<: !include common.yaml

tests/components/gp2y1010au0f/test.rp2040-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  adc_pin: GPIO26
+  output_pin: GPIO5
+
+<<: !include common.yaml

tests/components/gp8403/common.yaml

@@ -0,0 +1,20 @@
+i2c:
+  - id: i2c_gp8403
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+gp8403:
+  - id: gp8403_5v
+    voltage: 5V
+  - id: gp8403_10v
+    voltage: 10V
+
+output:
+  - platform: gp8403
+    id: gp8403_output_0
+    gp8403_id: gp8403_5v
+    channel: 0
+  - platform: gp8403
+    gp8403_id: gp8403_10v
+    id: gp8403_output_1
+    channel: 1

tests/components/gp8403/test.esp32-ard.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gp8403/test.esp32-c3-ard.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gp8403/test.esp32-c3-idf.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gp8403/test.esp32-idf.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gp8403/test.esp8266-ard.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gp8403/test.rp2040-ard.yaml

@@ -1,20 +1,5 @@
-i2c:
+substitutions:
-  - id: i2c_gp8403
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
 
-gp8403:
+<<: !include common.yaml
-  - id: gp8403_5v
-    voltage: 5V
-  - id: gp8403_10v
-    voltage: 10V
-
-output:
-  - platform: gp8403
-    id: gp8403_output_0
-    gp8403_id: gp8403_5v
-    channel: 0
-  - platform: gp8403
-    gp8403_id: gp8403_10v
-    id: gp8403_output_1
-    channel: 1

tests/components/gpio/common.yaml

@@ -0,0 +1,14 @@
+binary_sensor:
+  - platform: gpio
+    pin: ${binary_sensor_pin}
+    id: gpio_binary_sensor
+
+output:
+  - platform: gpio
+    pin: ${output_pin}
+    id: gpio_output
+
+switch:
+  - platform: gpio
+    pin: ${switch_pin}
+    id: gpio_switch

tests/components/gpio/test.esp32-ard.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO12
-    pin: 12
+  output_pin: GPIO13
-    id: gpio_binary_sensor
+  switch_pin: GPIO14
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 13
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 14
-    id: gpio_switch

tests/components/gpio/test.esp32-c3-ard.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO2
-    pin: 2
+  output_pin: GPIO3
-    id: gpio_binary_sensor
+  switch_pin: GPIO4
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 3
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 4
-    id: gpio_switch

tests/components/gpio/test.esp32-c3-idf.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO2
-    pin: 2
+  output_pin: GPIO3
-    id: gpio_binary_sensor
+  switch_pin: GPIO4
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 3
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 4
-    id: gpio_switch

tests/components/gpio/test.esp32-idf.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO12
-    pin: 12
+  output_pin: GPIO13
-    id: gpio_binary_sensor
+  switch_pin: GPIO14
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 13
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 14
-    id: gpio_switch

tests/components/gpio/test.esp8266-ard.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO12
-    pin: 12
+  output_pin: GPIO13
-    id: gpio_binary_sensor
+  switch_pin: GPIO14
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 13
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 14
-    id: gpio_switch

tests/components/gpio/test.rp2040-ard.yaml

@@ -1,14 +1,6 @@
-binary_sensor:
+substitutions:
-  - platform: gpio
+  binary_sensor_pin: GPIO2
-    pin: 2
+  output_pin: GPIO3
-    id: gpio_binary_sensor
+  switch_pin: GPIO4
 
-output:
+<<: !include common.yaml
-  - platform: gpio
-    pin: 3
-    id: gpio_output
-
-switch:
-  - platform: gpio
-    pin: 4
-    id: gpio_switch

tests/components/gps/common.yaml

@@ -0,0 +1,14 @@
+uart:
+  - id: uart_gps
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 9600
+    parity: EVEN
+
+gps:
+
+time:
+  - platform: gps
+    on_time_sync:
+      then:
+        logger.log: "It's time!"

tests/components/gps/test.esp32-ard.yaml

@@ -1,14 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gps
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
-    baud_rate: 9600
-    parity: EVEN
 
-gps:
+<<: !include common.yaml
-
-time:
-  - platform: gps
-    on_time_sync:
-      then:
-        logger.log: "It's time!"

tests/components/gps/test.esp32-c3-ard.yaml

@@ -1,14 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gps
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-gps:
+<<: !include common.yaml
-
-time:
-  - platform: gps
-    on_time_sync:
-      then:
-        logger.log: "It's time!"

tests/components/gps/test.esp8266-ard.yaml

@@ -1,14 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gps
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-gps:
+<<: !include common.yaml
-
-time:
-  - platform: gps
-    on_time_sync:
-      then:
-        logger.log: "It's time!"

tests/components/gps/test.rp2040-ard.yaml

@@ -1,14 +1,5 @@
-uart:
+substitutions:
-  - id: uart_gps
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
-    baud_rate: 9600
-    parity: EVEN
 
-gps:
+<<: !include common.yaml
-
-time:
-  - platform: gps
-    on_time_sync:
-      then:
-        logger.log: "It's time!"

tests/components/graph/common.yaml

@@ -0,0 +1,25 @@
+i2c:
+  - id: i2c_graph
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+sensor:
+  - platform: template
+    id: some_sensor
+
+graph:
+  - id: some_graph
+    sensor: some_sensor
+    duration: 1h
+    width: 100
+    height: 100
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: ${reset_pin}
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.esp32-ard.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.esp32-c3-ard.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.esp32-c3-idf.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.esp32-idf.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.esp8266-ard.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO15
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graph/test.rp2040-ard.yaml

@@ -1,25 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graph
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-sensor:
+<<: !include common.yaml
-  - platform: template
-    id: some_sensor
-
-graph:
-  - id: some_graph
-    sensor: some_sensor
-    duration: 1h
-    width: 100
-    height: 100
-
-display:
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());

tests/components/graphical_display_menu/common.yaml

@@ -0,0 +1,120 @@
+i2c:
+  - id: i2c_graphical_display_menu
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+display:
+  - platform: ssd1306_i2c
+    id: ssd1306_display
+    model: SSD1306_128X64
+    reset_pin: ${reset_pin}
+    pages:
+      - id: page1
+        lambda: |-
+          it.rectangle(0, 0, it.get_width(), it.get_height());
+
+font:
+  - file: "gfonts://Roboto"
+    id: roboto
+    size: 20
+
+number:
+  - platform: template
+    id: test_number
+    min_value: 0
+    step: 1
+    max_value: 10
+    optimistic: true
+
+select:
+  - platform: template
+    id: test_select
+    options:
+      - one
+      - two
+    optimistic: true
+
+switch:
+  - platform: template
+    id: test_switch
+    optimistic: true
+
+graphical_display_menu:
+  id: test_graphical_display_menu
+  display: ssd1306_display
+  font: roboto
+  active: false
+  mode: rotary
+  on_enter:
+    then:
+      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
+  on_leave:
+    then:
+      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
+  items:
+    - type: back
+      text: "Back"
+    - type: label
+    - type: menu
+      text: "Submenu 1"
+      items:
+        - type: back
+          text: "Back"
+        - type: menu
+          text: "Submenu 21"
+          items:
+            - type: back
+              text: "Back"
+            - type: command
+              text: "Show Main"
+              on_value:
+                then:
+                  - display_menu.show_main: test_graphical_display_menu
+    - type: select
+      text: "Enum Item"
+      immediate_edit: true
+      select: test_select
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: number
+      text: "Number"
+      number: test_number
+      on_enter:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_leave:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
+    - type: command
+      text: "Hide"
+      on_value:
+        then:
+          - display_menu.hide: test_graphical_display_menu
+    - type: switch
+      text: "Switch"
+      switch: test_switch
+      on_text: "Bright"
+      off_text: "Dark"
+      immediate_edit: false
+      on_value:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
+    - type: custom
+      text: !lambda 'return "Custom";'
+      value_lambda: 'return "Val";'
+      on_next:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
+      on_prev:
+        then:
+          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.esp32-ard.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.esp32-c3-ard.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.esp32-c3-idf.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.esp32-idf.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO16
-    scl: 16
+  sda_pin: GPIO17
-    sda: 17
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.esp8266-ard.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO15
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 13
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/graphical_display_menu/test.rp2040-ard.yaml

@@ -1,120 +1,6 @@
-i2c:
+substitutions:
-  - id: i2c_graphical_display_menu
+  scl_pin: GPIO5
-    scl: 5
+  sda_pin: GPIO4
-    sda: 4
+  reset_pin: GPIO6
 
-display:
+<<: !include common.yaml
-  - platform: ssd1306_i2c
-    id: ssd1306_display
-    model: SSD1306_128X64
-    reset_pin: 3
-    pages:
-      - id: page1
-        lambda: |-
-          it.rectangle(0, 0, it.get_width(), it.get_height());
-
-font:
-  - file: "gfonts://Roboto"
-    id: roboto
-    size: 20
-
-number:
-  - platform: template
-    id: test_number
-    min_value: 0
-    step: 1
-    max_value: 10
-    optimistic: true
-
-select:
-  - platform: template
-    id: test_select
-    options:
-      - one
-      - two
-    optimistic: true
-
-switch:
-  - platform: template
-    id: test_switch
-    optimistic: true
-
-graphical_display_menu:
-  id: test_graphical_display_menu
-  display: ssd1306_display
-  font: roboto
-  active: false
-  mode: rotary
-  on_enter:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
-  on_leave:
-    then:
-      lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
-  items:
-    - type: back
-      text: "Back"
-    - type: label
-    - type: menu
-      text: "Submenu 1"
-      items:
-        - type: back
-          text: "Back"
-        - type: menu
-          text: "Submenu 21"
-          items:
-            - type: back
-              text: "Back"
-            - type: command
-              text: "Show Main"
-              on_value:
-                then:
-                  - display_menu.show_main: test_graphical_display_menu
-    - type: select
-      text: "Enum Item"
-      immediate_edit: true
-      select: test_select
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: number
-      text: "Number"
-      number: test_number
-      on_enter:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_leave:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
-    - type: command
-      text: "Hide"
-      on_value:
-        then:
-          - display_menu.hide: test_graphical_display_menu
-    - type: switch
-      text: "Switch"
-      switch: test_switch
-      on_text: "Bright"
-      off_text: "Dark"
-      immediate_edit: false
-      on_value:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
-    - type: custom
-      text: !lambda 'return "Custom";'
-      value_lambda: 'return "Val";'
-      on_next:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
-      on_prev:
-        then:
-          lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'

tests/components/gree/common.yaml

@@ -0,0 +1,8 @@
+remote_transmitter:
+  pin: ${pin}
+  carrier_duty_percent: 50%
+
+climate:
+  - platform: gree
+    name: GREE
+    model: generic

tests/components/gree/test.esp32-ard.yaml

@@ -1,8 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: gree
-    name: GREE
-    model: generic

tests/components/gree/test.esp32-c3-ard.yaml

@@ -1,8 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: gree
-    name: GREE
-    model: generic

tests/components/gree/test.esp32-c3-idf.yaml

@@ -1,8 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: gree
-    name: GREE
-    model: generic

tests/components/gree/test.esp32-idf.yaml

@@ -1,8 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 2
+  pin: GPIO2
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: gree
-    name: GREE
-    model: generic

tests/components/gree/test.esp8266-ard.yaml

@@ -1,8 +1,4 @@
-remote_transmitter:
+substitutions:
-  pin: 5
+  pin: GPIO5
-  carrier_duty_percent: 50%
 
-climate:
+<<: !include common.yaml
-  - platform: gree
-    name: GREE
-    model: generic

tests/components/grove_gas_mc_v2/common.yaml

@@ -1,6 +1,10 @@
+i2c:
+  - id: i2c_grove_gas_mc_v2
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
 sensor:
   - platform: grove_gas_mc_v2
-    i2c_id: i2c_bus
     nitrogen_dioxide:
       name: "Nitrogen Dioxide"
     ethanol:

tests/components/grove_gas_mc_v2/test.esp32-ard.yaml

@@ -1,6 +1,5 @@
-i2c:
+substitutions:
-  sda: 21
+  scl_pin: GPIO16
-  scl: 22
+  sda_pin: GPIO17
-  id: i2c_bus
 
 <<: !include common.yaml

tests/components/grove_gas_mc_v2/test.esp32-c3-ard.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  scl_pin: GPIO5
+  sda_pin: GPIO4
+
+<<: !include common.yaml

tests/components/grove_gas_mc_v2/test.esp32-c3-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  scl_pin: GPIO5
+  sda_pin: GPIO4
+
+<<: !include common.yaml

tests/components/grove_gas_mc_v2/test.esp32-idf.yaml

@@ -1,6 +1,5 @@
-i2c:
+substitutions:
-  sda: 21
+  scl_pin: GPIO16
-  scl: 22
+  sda_pin: GPIO17
-  id: i2c_bus
 
 <<: !include common.yaml

tests/components/grove_gas_mc_v2/test.esp8266-ard.yaml

@@ -1,6 +1,5 @@
-i2c:
+substitutions:
-  sda: 4
+  scl_pin: GPIO5
-  scl: 5
+  sda_pin: GPIO4
-  id: i2c_bus
 
 <<: !include common.yaml

tests/components/grove_gas_mc_v2/test.rp2040-ard.yaml

@@ -1,6 +1,5 @@
-i2c:
+substitutions:
-  sda: 21
+  scl_pin: GPIO5
-  scl: 22
+  sda_pin: GPIO4
-  id: i2c_bus
 
 <<: !include common.yaml

tests/components/grove_tb6612fng/common.yaml

@@ -0,0 +1,23 @@
+esphome:
+  on_boot:
+    then:
+      - grove_tb6612fng.run:
+          channel: 1
+          speed: 255
+          direction: BACKWARD
+          id: test_motor
+      - grove_tb6612fng.stop:
+          channel: 1
+          id: test_motor
+      - grove_tb6612fng.break:
+          channel: 1
+          id: test_motor
+
+i2c:
+  - id: i2c_grove_tb6612fng
+    scl: ${scl_pin}
+    sda: ${sda_pin}
+
+grove_tb6612fng:
+  id: test_motor
+  address: 0x14

tests/components/grove_tb6612fng/test.esp32-ard.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO16
-    then:
+  sda_pin: GPIO17
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 16
-    sda: 17
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/grove_tb6612fng/test.esp32-c3-ard.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO5
-    then:
+  sda_pin: GPIO4
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 5
-    sda: 4
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/grove_tb6612fng/test.esp32-c3-idf.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO5
-    then:
+  sda_pin: GPIO4
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 5
-    sda: 4
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/grove_tb6612fng/test.esp32-idf.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO16
-    then:
+  sda_pin: GPIO17
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 16
-    sda: 17
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/grove_tb6612fng/test.esp8266-ard.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO5
-    then:
+  sda_pin: GPIO4
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 5
-    sda: 4
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/grove_tb6612fng/test.rp2040-ard.yaml

@@ -1,23 +1,5 @@
-esphome:
+substitutions:
-  on_boot:
+  scl_pin: GPIO5
-    then:
+  sda_pin: GPIO4
-      - grove_tb6612fng.run:
-          channel: 1
-          speed: 255
-          direction: BACKWARD
-          id: test_motor
-      - grove_tb6612fng.stop:
-          channel: 1
-          id: test_motor
-      - grove_tb6612fng.break:
-          channel: 1
-          id: test_motor
 
-i2c:
+<<: !include common.yaml
-  - id: i2c_grove_tb6612fng
-    scl: 5
-    sda: 4
-
-grove_tb6612fng:
-  id: test_motor
-  address: 0x14

tests/components/growatt_solar/common.yaml

@@ -0,0 +1,62 @@
+uart:
+  - id: uart_growatt_solar
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 9600
+
+modbus:
+  flow_control_pin: ${flow_control_pin}
+
+sensor:
+  - platform: growatt_solar
+    update_interval: 10s
+    protocol_version: RTU
+    inverter_status:
+      name: Growatt Status Code
+    phase_a:
+      voltage:
+        name: Growatt Voltage Phase A
+      current:
+        name: Growatt Current Phase A
+      active_power:
+        name: Growatt Power Phase A
+    phase_b:
+      voltage:
+        name: Growatt Voltage Phase B
+      current:
+        name: Growatt Current Phase B
+      active_power:
+        name: Growatt Power Phase B
+    phase_c:
+      voltage:
+        name: Growatt Voltage Phase C
+      current:
+        name: Growatt Current Phase C
+      active_power:
+        name: Growatt Power Phase C
+    pv1:
+      voltage:
+        name: Growatt PV1 Voltage
+      current:
+        name: Growatt PV1 Current
+      active_power:
+        name: Growatt PV1 Active Power
+    pv2:
+      voltage:
+        name: Growatt PV2 Voltage
+      current:
+        name: Growatt PV2 Current
+      active_power:
+        name: Growatt PV2 Active Power
+    active_power:
+      name: Growatt Grid Active Power
+    pv_active_power:
+      name: Growatt PV Active Power
+    frequency:
+      name: Growatt Frequency
+    energy_production_day:
+      name: Growatt Today's Generation
+    total_energy_production:
+      name: Growatt Total Energy Production
+    inverter_module_temp:
+      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.esp32-ard.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 13
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.esp32-c3-ard.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.esp32-c3-idf.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.esp32-idf.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO12
-    tx_pin: 17
+  rx_pin: GPIO14
-    rx_pin: 16
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 13
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.esp8266-ard.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO13
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 13
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp

tests/components/growatt_solar/test.rp2040-ard.yaml

@@ -1,62 +1,6 @@
-uart:
+substitutions:
-  - id: uart_growatt_solar
+  tx_pin: GPIO4
-    tx_pin: 4
+  rx_pin: GPIO5
-    rx_pin: 5
+  flow_control_pin: GPIO3
-    baud_rate: 9600
 
-modbus:
+<<: !include common.yaml
-  flow_control_pin: 3
-
-sensor:
-  - platform: growatt_solar
-    update_interval: 10s
-    protocol_version: RTU
-    inverter_status:
-      name: Growatt Status Code
-    phase_a:
-      voltage:
-        name: Growatt Voltage Phase A
-      current:
-        name: Growatt Current Phase A
-      active_power:
-        name: Growatt Power Phase A
-    phase_b:
-      voltage:
-        name: Growatt Voltage Phase B
-      current:
-        name: Growatt Current Phase B
-      active_power:
-        name: Growatt Power Phase B
-    phase_c:
-      voltage:
-        name: Growatt Voltage Phase C
-      current:
-        name: Growatt Current Phase C
-      active_power:
-        name: Growatt Power Phase C
-    pv1:
-      voltage:
-        name: Growatt PV1 Voltage
-      current:
-        name: Growatt PV1 Current
-      active_power:
-        name: Growatt PV1 Active Power
-    pv2:
-      voltage:
-        name: Growatt PV2 Voltage
-      current:
-        name: Growatt PV2 Current
-      active_power:
-        name: Growatt PV2 Active Power
-    active_power:
-      name: Growatt Grid Active Power
-    pv_active_power:
-      name: Growatt PV Active Power
-    frequency:
-      name: Growatt Frequency
-    energy_production_day:
-      name: Growatt Today's Generation
-    total_energy_production:
-      name: Growatt Total Energy Production
-    inverter_module_temp:
-      name: Growatt Inverter Module Temp