sascha/esphome
1
0
Fork 0
mirror of https://github.com/esphome/esphome.git synced 2025-10-29 14:13:51 +00:00
Code Issues Releases Wiki Activity

Remove manual handling of ethernet power pin (#4062)

Browse Source
This commit is contained in:
Jesse Hills
2022-11-23 09:43:43 +13:00
committed by GitHub
parent 7258a82875
commit 0f9c956c04
3 changed files with 9 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
esphome/components/ethernet/ethernet_component.cpp
View File

@@ -29,10 +29,6 @@ void EthernetComponent::setup() {
// Delay here to allow power to stabilise before Ethernet is initialised.
delay(300); // NOLINT
if (this->power_pin_ != nullptr) {
this->power_pin_->setup();
}
esp_err_t err;
err = esp_netif_init();
ESPHL_ERROR_CHECK(err, "ETH netif init error");
@@ -47,6 +43,8 @@ void EthernetComponent::setup() {
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
phy_config.phy_addr = this->phy_addr_;
if (this->power_pin_ != -1)
phy_config.reset_gpio_num = this->power_pin_;
mac_config.smi_mdc_gpio_num = this->mdc_pin_;
mac_config.smi_mdio_gpio_num = this->mdio_pin_;
@@ -96,11 +94,6 @@ void EthernetComponent::setup() {
/* start Ethernet driver state machine */
err = esp_eth_start(this->eth_handle_);
ESPHL_ERROR_CHECK(err, "ETH start error");
if (this->power_pin_ != nullptr) {
this->orig_power_control_fun_ = phy->pwrctl;
phy->pwrctl = EthernetComponent::eth_phy_power_control;
}
}
void EthernetComponent::loop() {
@@ -169,7 +162,8 @@ void EthernetComponent::dump_config() {
ESP_LOGCONFIG(TAG, "Ethernet:");
this->dump_connect_params_();
LOG_PIN(" Power Pin: ", this->power_pin_);
if (this->power_pin_ != -1)
ESP_LOGCONFIG(TAG, " Power Pin: %u", this->power_pin_);
ESP_LOGCONFIG(TAG, " MDC Pin: %u", this->mdc_pin_);
ESP_LOGCONFIG(TAG, " MDIO Pin: %u", this->mdio_pin_);
ESP_LOGCONFIG(TAG, " Type: %s", eth_type.c_str());
@@ -277,12 +271,6 @@ void EthernetComponent::start_connect_() {
this->connect_begin_ = millis();
this->status_set_warning();
}
esp_err_t EthernetComponent::eth_phy_power_control(esp_eth_phy_t *phy, bool enable) {
global_eth_component->power_pin_->digital_write(enable);
// power up takes some time, datasheet says max 300µs
delay(1);
return global_eth_component->orig_power_control_fun_(phy, enable);
}
bool EthernetComponent::is_connected() { return this->state_ == EthernetComponentState::CONNECTED; }
@@ -319,7 +307,7 @@ void EthernetComponent::dump_connect_params_() {
}
void EthernetComponent::set_phy_addr(uint8_t phy_addr) { this->phy_addr_ = phy_addr; }
void EthernetComponent::set_power_pin(GPIOPin *power_pin) { this->power_pin_ = power_pin; }
void EthernetComponent::set_power_pin(int power_pin) { this->power_pin_ = power_pin; }
void EthernetComponent::set_mdc_pin(uint8_t mdc_pin) { this->mdc_pin_ = mdc_pin; }
void EthernetComponent::set_mdio_pin(uint8_t mdio_pin) { this->mdio_pin_ = mdio_pin; }
void EthernetComponent::set_type(EthernetType type) { this->type_ = type; }