Merge remote-tracking branch 'upstream/dev' into zwave_proxy

.ai/instructions.md

@@ -9,7 +9,7 @@ This document provides essential context for AI models interacting with this pro
 
 ## 2. Core Technologies & Stack
 
-*   **Languages:** Python (>=3.10), C++ (gnu++20)
+*   **Languages:** Python (>=3.11), C++ (gnu++20)
 *   **Frameworks & Runtimes:** PlatformIO, Arduino, ESP-IDF.
 *   **Build Systems:** PlatformIO is the primary build system. CMake is used as an alternative.
 *   **Configuration:** YAML.
@@ -38,7 +38,7 @@ This document provides essential context for AI models interacting with this pro
     5.  **Dashboard** (`esphome/dashboard/`): A web-based interface for device configuration, management, and OTA updates.
 
 *   **Platform Support:**
-    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (S2, S3, C3, etc.) and both IDF and Arduino frameworks.
+    1.  **ESP32** (`components/esp32/`): Espressif ESP32 family. Supports multiple variants (Original, C2, C3, C5, C6, H2, P4, S2, S3) with ESP-IDF framework. Arduino framework supports only a subset of the variants (Original, C3, S2, S3).
     2.  **ESP8266** (`components/esp8266/`): Espressif ESP8266. Arduino framework only, with memory constraints.
     3.  **RP2040** (`components/rp2040/`): Raspberry Pi Pico/RP2040. Arduino framework with PIO (Programmable I/O) support.
     4.  **LibreTiny** (`components/libretiny/`): Realtek and Beken chips. Supports multiple chip families and auto-generated components.
@@ -150,7 +150,8 @@ This document provides essential context for AI models interacting with this pro
 *   **Configuration Validation:**
     *   **Common Validators:** `cv.int_`, `cv.float_`, `cv.string`, `cv.boolean`, `cv.int_range(min=0, max=100)`, `cv.positive_int`, `cv.percentage`.
     *   **Complex Validation:** `cv.All(cv.string, cv.Length(min=1, max=50))`, `cv.Any(cv.int_, cv.string)`.
-    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `cv.only_with_arduino`.
+    *   **Platform-Specific:** `cv.only_on(["esp32", "esp8266"])`, `esp32.only_on_variant(...)`, `cv.only_on_esp32`, `cv.only_on_esp8266`, `cv.only_on_rp2040`.
+    *   **Framework-Specific:** `cv.only_with_framework(...)`, `cv.only_with_arduino`, `cv.only_with_esp_idf`.
     *   **Schema Extensions:**
         ```python
         CONFIG_SCHEMA = cv.Schema({ ... })

.clang-tidy.hash

@@ -1 +1 @@
-0440e35cf89a49e8a35fd3690ed453a72b7b6f61b9d346ced6140e1c0d39dff6
+4368db58e8f884aff245996b1e8b644cc0796c0bb2fa706d5740d40b823d3ac9

.pre-commit-config.yaml

@@ -11,7 +11,7 @@ ci:
 repos:
   - repo: https://github.com/astral-sh/ruff-pre-commit
     # Ruff version.
-    rev: v0.12.9
+    rev: v0.12.10
     hooks:
       # Run the linter.
       - id: ruff

esphome/components/climate/climate.cpp

@@ -327,7 +327,7 @@ void Climate::add_on_control_callback(std::function<void(ClimateCall &)> &&callb
 static const uint32_t RESTORE_STATE_VERSION = 0x848EA6ADUL;
 
 optional<ClimateDeviceRestoreState> Climate::restore_state_() {
-  this->rtc_ = global_preferences->make_preference<ClimateDeviceRestoreState>(this->get_object_id_hash() ^
+  this->rtc_ = global_preferences->make_preference<ClimateDeviceRestoreState>(this->get_preference_hash() ^
                                                                               RESTORE_STATE_VERSION);
   ClimateDeviceRestoreState recovered{};
   if (!this->rtc_.load(&recovered))

esphome/components/cover/cover.cpp

@@ -194,7 +194,7 @@ void Cover::publish_state(bool save) {
   }
 }
 optional<CoverRestoreState> Cover::restore_state_() {
-  this->rtc_ = global_preferences->make_preference<CoverRestoreState>(this->get_object_id_hash());
+  this->rtc_ = global_preferences->make_preference<CoverRestoreState>(this->get_preference_hash());
   CoverRestoreState recovered{};
   if (!this->rtc_.load(&recovered))
     return {};

esphome/components/deep_sleep/deep_sleep_esp32.cpp

@@ -1,4 +1,5 @@
 #ifdef USE_ESP32
+#include "soc/soc_caps.h"
 #include "driver/gpio.h"
 #include "deep_sleep_component.h"
 #include "esphome/core/log.h"
@@ -83,7 +84,11 @@ void DeepSleepComponent::deep_sleep_() {
     }
     gpio_sleep_set_direction(gpio_pin, GPIO_MODE_INPUT);
     gpio_hold_en(gpio_pin);
+#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
+    // Some ESP32 variants support holding a single GPIO during deep sleep without this function
+    // For those variants, gpio_hold_en() is sufficient to hold the pin state during deep sleep
     gpio_deep_sleep_hold_en();
+#endif
     bool level = !this->wakeup_pin_->is_inverted();
     if (this->wakeup_pin_mode_ == WAKEUP_PIN_MODE_INVERT_WAKEUP && this->wakeup_pin_->digital_read()) {
       level = !level;
@@ -120,7 +125,11 @@ void DeepSleepComponent::deep_sleep_() {
     }
     gpio_sleep_set_direction(gpio_pin, GPIO_MODE_INPUT);
     gpio_hold_en(gpio_pin);
+#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
+    // Some ESP32 variants support holding a single GPIO during deep sleep without this function
+    // For those variants, gpio_hold_en() is sufficient to hold the pin state during deep sleep
     gpio_deep_sleep_hold_en();
+#endif
     bool level = !this->wakeup_pin_->is_inverted();
     if (this->wakeup_pin_mode_ == WAKEUP_PIN_MODE_INVERT_WAKEUP && this->wakeup_pin_->digital_read()) {
       level = !level;

esphome/components/duty_time/duty_time_sensor.cpp

@@ -41,7 +41,7 @@ void DutyTimeSensor::setup() {
   uint32_t seconds = 0;
 
   if (this->restore_) {
-    this->pref_ = global_preferences->make_preference<uint32_t>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<uint32_t>(this->get_preference_hash());
     this->pref_.load(&seconds);
   }
 

esphome/components/esp32_ble/__init__.py

@@ -5,9 +5,14 @@ from esphome import automation
 import esphome.codegen as cg
 from esphome.components.esp32 import add_idf_sdkconfig_option, const, get_esp32_variant
 import esphome.config_validation as cv
-from esphome.const import CONF_ENABLE_ON_BOOT, CONF_ESPHOME, CONF_ID, CONF_NAME
+from esphome.const import (
+    CONF_ENABLE_ON_BOOT,
+    CONF_ESPHOME,
+    CONF_ID,
+    CONF_NAME,
+    CONF_NAME_ADD_MAC_SUFFIX,
+)
 from esphome.core import CORE, TimePeriod
-from esphome.core.config import CONF_NAME_ADD_MAC_SUFFIX
 import esphome.final_validate as fv
 
 DEPENDENCIES = ["esp32"]
@@ -280,6 +285,10 @@ async def to_code(config):
             add_idf_sdkconfig_option(
                 "CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT", timeout_seconds
             )
+            # Increase GATT client connection retry count for problematic devices
+            # Default in ESP-IDF is 3, we increase to 10 for better reliability with
+            # low-power/timing-sensitive devices
+            add_idf_sdkconfig_option("CONFIG_BT_GATTC_CONNECT_RETRY_COUNT", 10)
 
         # Set the maximum number of notification registrations
         # This controls how many BLE characteristics can have notifications enabled

esphome/components/esp32_ble_client/ble_client_base.cpp

@@ -7,6 +7,7 @@
 
 #include <esp_gap_ble_api.h>
 #include <esp_gatt_defs.h>
+#include <esp_gattc_api.h>
 
 namespace esphome::esp32_ble_client {
 
@@ -111,43 +112,19 @@ void BLEClientBase::connect() {
            this->remote_addr_type_);
   this->paired_ = false;
 
-  // Set preferred connection parameters before connecting
+  // Determine connection parameters based on connection type
-  // Use FAST for all V3 connections (better latency and reliability)
+  if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
-  // Use MEDIUM for V1/legacy connections (balanced performance)
+    // V3 without cache needs fast params for service discovery
-  uint16_t min_interval, max_interval, timeout;
+    this->set_conn_params_(FAST_MIN_CONN_INTERVAL, FAST_MAX_CONN_INTERVAL, 0, FAST_CONN_TIMEOUT, "fast");
-  const char *param_type;
+  } else if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-
+    // V3 with cache can use medium params
-  if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE ||
+    this->set_conn_params_(MEDIUM_MIN_CONN_INTERVAL, MEDIUM_MAX_CONN_INTERVAL, 0, MEDIUM_CONN_TIMEOUT, "medium");
-      this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-    min_interval = FAST_MIN_CONN_INTERVAL;
-    max_interval = FAST_MAX_CONN_INTERVAL;
-    timeout = FAST_CONN_TIMEOUT;
-    param_type = "fast";
-  } else {
-    min_interval = MEDIUM_MIN_CONN_INTERVAL;
-    max_interval = MEDIUM_MAX_CONN_INTERVAL;
-    timeout = MEDIUM_CONN_TIMEOUT;
-    param_type = "medium";
   }
+  // For V1/Legacy, don't set params - use ESP-IDF defaults
 
-  auto param_ret = esp_ble_gap_set_prefer_conn_params(this->remote_bda_, min_interval, max_interval,
+  // Open the connection
-                                                      0,  // latency: 0
-                                                      timeout);
-  if (param_ret != ESP_OK) {
-    ESP_LOGW(TAG, "[%d] [%s] esp_ble_gap_set_prefer_conn_params failed: %d", this->connection_index_,
-             this->address_str_.c_str(), param_ret);
-  } else {
-    this->log_connection_params_(param_type);
-  }
-
-  // Now open the connection
   auto ret = esp_ble_gattc_open(this->gattc_if_, this->remote_bda_, this->remote_addr_type_, true);
-  if (ret) {
+  this->handle_connection_result_(ret);
-    this->log_gattc_warning_("esp_ble_gattc_open", ret);
-    this->set_state(espbt::ClientState::IDLE);
-  } else {
-    this->set_state(espbt::ClientState::CONNECTING);
-  }
 }
 
 esp_err_t BLEClientBase::pair() { return esp_ble_set_encryption(this->remote_bda_, ESP_BLE_SEC_ENCRYPT); }
@@ -159,7 +136,8 @@ void BLEClientBase::disconnect() {
     return;
   }
   if (this->state_ == espbt::ClientState::CONNECTING || this->conn_id_ == UNSET_CONN_ID) {
-    this->log_warning_("Disconnect before connected, disconnect scheduled.");
+    ESP_LOGD(TAG, "[%d] [%s] Disconnect before connected, disconnect scheduled", this->connection_index_,
+             this->address_str_.c_str());
     this->want_disconnect_ = true;
     return;
   }
@@ -231,6 +209,15 @@ void BLEClientBase::log_connection_params_(const char *param_type) {
   ESP_LOGD(TAG, "[%d] [%s] %s conn params", this->connection_index_, this->address_str_.c_str(), param_type);
 }
 
+void BLEClientBase::handle_connection_result_(esp_err_t ret) {
+  if (ret) {
+    this->log_gattc_warning_("esp_ble_gattc_open", ret);
+    this->set_state(espbt::ClientState::IDLE);
+  } else {
+    this->set_state(espbt::ClientState::CONNECTING);
+  }
+}
+
 void BLEClientBase::log_error_(const char *message) {
   ESP_LOGE(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
 }
@@ -243,17 +230,30 @@ void BLEClientBase::log_warning_(const char *message) {
   ESP_LOGW(TAG, "[%d] [%s] %s", this->connection_index_, this->address_str_.c_str(), message);
 }
 
-void BLEClientBase::restore_medium_conn_params_() {
+void BLEClientBase::update_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency,
-  // Restore to medium connection parameters after initial connection phase
+                                        uint16_t timeout, const char *param_type) {
-  // This balances performance with bandwidth usage for normal operation
   esp_ble_conn_update_params_t conn_params = {{0}};
   memcpy(conn_params.bda, this->remote_bda_, sizeof(esp_bd_addr_t));
-  conn_params.min_int = MEDIUM_MIN_CONN_INTERVAL;
+  conn_params.min_int = min_interval;
-  conn_params.max_int = MEDIUM_MAX_CONN_INTERVAL;
+  conn_params.max_int = max_interval;
-  conn_params.latency = 0;
+  conn_params.latency = latency;
-  conn_params.timeout = MEDIUM_CONN_TIMEOUT;
+  conn_params.timeout = timeout;
-  this->log_connection_params_("medium");
+  this->log_connection_params_(param_type);
-  esp_ble_gap_update_conn_params(&conn_params);
+  esp_err_t err = esp_ble_gap_update_conn_params(&conn_params);
+  if (err != ESP_OK) {
+    this->log_gattc_warning_("esp_ble_gap_update_conn_params", err);
+  }
+}
+
+void BLEClientBase::set_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency, uint16_t timeout,
+                                     const char *param_type) {
+  // Set preferred connection parameters before connecting
+  // These will be used when establishing the connection
+  this->log_connection_params_(param_type);
+  esp_err_t err = esp_ble_gap_set_prefer_conn_params(this->remote_bda_, min_interval, max_interval, latency, timeout);
+  if (err != ESP_OK) {
+    this->log_gattc_warning_("esp_ble_gap_set_prefer_conn_params", err);
+  }
 }
 
 bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t esp_gattc_if,
@@ -285,11 +285,22 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       this->log_gattc_event_("OPEN");
       // conn_id was already set in ESP_GATTC_CONNECT_EVT
       this->service_count_ = 0;
+
+      // ESP-IDF's BLE stack may send ESP_GATTC_OPEN_EVT after esp_ble_gattc_open() returns an
+      // error, if the error occurred at the BTA/GATT layer. This can result in the event
+      // arriving after we've already transitioned to IDLE state.
+      if (this->state_ == espbt::ClientState::IDLE) {
+        ESP_LOGD(TAG, "[%d] [%s] ESP_GATTC_OPEN_EVT in IDLE state (status=%d), ignoring", this->connection_index_,
+                 this->address_str_.c_str(), param->open.status);
+        break;
+      }
+
       if (this->state_ != espbt::ClientState::CONNECTING) {
         // This should not happen but lets log it in case it does
         // because it means we have a bad assumption about how the
         // ESP BT stack works.
-        this->log_error_("ESP_GATTC_OPEN_EVT wrong state status", param->open.status);
+        ESP_LOGE(TAG, "[%d] [%s] ESP_GATTC_OPEN_EVT in %s state (status=%d)", this->connection_index_,
+                 this->address_str_.c_str(), espbt::client_state_to_string(this->state_), param->open.status);
       }
       if (param->open.status != ESP_GATT_OK && param->open.status != ESP_GATT_ALREADY_OPEN) {
         this->log_gattc_warning_("Connection open", param->open.status);
@@ -308,12 +319,13 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       this->set_state(espbt::ClientState::CONNECTED);
       ESP_LOGI(TAG, "[%d] [%s] Connection open", this->connection_index_, this->address_str_.c_str());
       if (this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
-        // Restore to medium connection parameters for cached connections too
+        // Cached connections already connected with medium parameters, no update needed
-        this->restore_medium_conn_params_();
         // only set our state, subclients might have more stuff to do yet.
         this->state_ = espbt::ClientState::ESTABLISHED;
         break;
       }
+      // For V3_WITHOUT_CACHE, we already set fast params before connecting
+      // No need to update them again here
       this->log_event_("Searching for services");
       esp_ble_gattc_search_service(esp_gattc_if, param->cfg_mtu.conn_id, nullptr);
       break;
@@ -395,12 +407,11 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       if (this->conn_id_ != param->search_cmpl.conn_id)
         return false;
       this->log_gattc_event_("SEARCH_CMPL");
-      // For V3 connections, restore to medium connection parameters after service discovery
+      // For V3_WITHOUT_CACHE, switch back to medium connection parameters after service discovery
       // This balances performance with bandwidth usage after the critical discovery phase
-      if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE ||
+      if (this->connection_type_ == espbt::ConnectionType::V3_WITHOUT_CACHE) {
-          this->connection_type_ == espbt::ConnectionType::V3_WITH_CACHE) {
+        this->update_conn_params_(MEDIUM_MIN_CONN_INTERVAL, MEDIUM_MAX_CONN_INTERVAL, 0, MEDIUM_CONN_TIMEOUT, "medium");
-        this->restore_medium_conn_params_();
+      } else if (this->connection_type_ != espbt::ConnectionType::V3_WITH_CACHE) {
-      } else {
 #ifdef USE_ESP32_BLE_DEVICE
         for (auto &svc : this->services_) {
           ESP_LOGV(TAG, "[%d] [%s] Service UUID: %s", this->connection_index_, this->address_str_.c_str(),
@@ -484,6 +495,11 @@ bool BLEClientBase::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_
       break;
     }
 
+    case ESP_GATTC_UNREG_FOR_NOTIFY_EVT: {
+      this->log_gattc_event_("UNREG_FOR_NOTIFY");
+      break;
+    }
+
     default:
       // ideally would check all other events for matching conn_id
       ESP_LOGD(TAG, "[%d] [%s] Event %d", this->connection_index_, this->address_str_.c_str(), event);

esphome/components/esp32_ble_client/ble_client_base.h

@@ -133,10 +133,14 @@ class BLEClientBase : public espbt::ESPBTClient, public Component {
 
   void log_event_(const char *name);
   void log_gattc_event_(const char *name);
-  void restore_medium_conn_params_();
+  void update_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency, uint16_t timeout,
+                           const char *param_type);
+  void set_conn_params_(uint16_t min_interval, uint16_t max_interval, uint16_t latency, uint16_t timeout,
+                        const char *param_type);
   void log_gattc_warning_(const char *operation, esp_gatt_status_t status);
   void log_gattc_warning_(const char *operation, esp_err_t err);
   void log_connection_params_(const char *param_type);
+  void handle_connection_result_(esp_err_t ret);
   // Compact error logging helpers to reduce flash usage
   void log_error_(const char *message);
   void log_error_(const char *message, int code);

esphome/components/esp32_ble_tracker/automation.h

@@ -80,14 +80,17 @@ class BLEManufacturerDataAdvertiseTrigger : public Trigger<const adv_data_t &>,
   ESPBTUUID uuid_;
 };
 
+#endif  // USE_ESP32_BLE_DEVICE
+
 class BLEEndOfScanTrigger : public Trigger<>, public ESPBTDeviceListener {
  public:
   explicit BLEEndOfScanTrigger(ESP32BLETracker *parent) { parent->register_listener(this); }
 
+#ifdef USE_ESP32_BLE_DEVICE
   bool parse_device(const ESPBTDevice &device) override { return false; }
+#endif
   void on_scan_end() override { this->trigger(); }
 };
-#endif  // USE_ESP32_BLE_DEVICE
 
 template<typename... Ts> class ESP32BLEStartScanAction : public Action<Ts...> {
  public:

esphome/components/fan/fan.cpp

@@ -148,7 +148,8 @@ void Fan::publish_state() {
 constexpr uint32_t RESTORE_STATE_VERSION = 0x71700ABA;
 optional<FanRestoreState> Fan::restore_state_() {
   FanRestoreState recovered{};
-  this->rtc_ = global_preferences->make_preference<FanRestoreState>(this->get_object_id_hash() ^ RESTORE_STATE_VERSION);
+  this->rtc_ =
+      global_preferences->make_preference<FanRestoreState>(this->get_preference_hash() ^ RESTORE_STATE_VERSION);
   bool restored = this->rtc_.load(&recovered);
 
   switch (this->restore_mode_) {

esphome/components/haier/haier_base.cpp

@@ -351,7 +351,7 @@ ClimateTraits HaierClimateBase::traits() { return traits_; }
 void HaierClimateBase::initialization() {
   constexpr uint32_t restore_settings_version = 0xA77D21EF;
   this->base_rtc_ =
-      global_preferences->make_preference<HaierBaseSettings>(this->get_object_id_hash() ^ restore_settings_version);
+      global_preferences->make_preference<HaierBaseSettings>(this->get_preference_hash() ^ restore_settings_version);
   HaierBaseSettings recovered;
   if (!this->base_rtc_.load(&recovered)) {
     recovered = {false, true};

esphome/components/haier/hon_climate.cpp

@@ -516,7 +516,7 @@ void HonClimate::initialization() {
   HaierClimateBase::initialization();
   constexpr uint32_t restore_settings_version = 0x57EB59DDUL;
   this->hon_rtc_ =
-      global_preferences->make_preference<HonSettings>(this->get_object_id_hash() ^ restore_settings_version);
+      global_preferences->make_preference<HonSettings>(this->get_preference_hash() ^ restore_settings_version);
   HonSettings recovered;
   if (this->hon_rtc_.load(&recovered)) {
     this->settings_ = recovered;

esphome/components/http_request/http_request_host.cpp

@@ -1,7 +1,10 @@
-#include "http_request_host.h"
-
 #ifdef USE_HOST
 
+#define USE_HTTP_REQUEST_HOST_H
+#define CPPHTTPLIB_NO_EXCEPTIONS
+#include "httplib.h"
+#include "http_request_host.h"
+
 #include <regex>
 #include "esphome/components/network/util.h"
 #include "esphome/components/watchdog/watchdog.h"

esphome/components/http_request/http_request_host.h

@@ -1,11 +1,7 @@
 #pragma once
 
-#include "http_request.h"
-
 #ifdef USE_HOST
-
+#include "http_request.h"
-#define CPPHTTPLIB_NO_EXCEPTIONS
-#include "httplib.h"
 namespace esphome {
 namespace http_request {
 

esphome/components/http_request/httplib.h

@@ -3,12 +3,10 @@
 /**
  * NOTE: This is a copy of httplib.h from https://github.com/yhirose/cpp-httplib
  *
- * It has been modified only to add ifdefs for USE_HOST. While it contains many functions unused in ESPHome,
+ * It has been modified to add ifdefs for USE_HOST. While it contains many functions unused in ESPHome,
  * it was considered preferable to use it with as few changes as possible, to facilitate future updates.
  */
 
-#include "esphome/core/defines.h"
-
 //
 //  httplib.h
 //
@@ -17,6 +15,11 @@
 //
 
 #ifdef USE_HOST
+// Prevent this code being included in main.cpp
+#ifdef USE_HTTP_REQUEST_HOST_H
+
+#include "esphome/core/defines.h"
+
 #ifndef CPPHTTPLIB_HTTPLIB_H
 #define CPPHTTPLIB_HTTPLIB_H
 
@@ -9687,5 +9690,6 @@ inline SSL_CTX *Client::ssl_context() const {
 #endif
 
 #endif  // CPPHTTPLIB_HTTPLIB_H
+#endif  // USE_HTTP_REQUEST_HOST_H
 
 #endif

esphome/components/integration/integration_sensor.cpp

@@ -10,7 +10,7 @@ static const char *const TAG = "integration";
 
 void IntegrationSensor::setup() {
   if (this->restore_) {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     float preference_value = 0;
     this->pref_.load(&preference_value);
     this->result_ = preference_value;

esphome/components/ld2450/ld2450.cpp

@@ -184,7 +184,7 @@ static inline bool validate_header_footer(const uint8_t *header_footer, const ui
 void LD2450Component::setup() {
 #ifdef USE_NUMBER
   if (this->presence_timeout_number_ != nullptr) {
-    this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->presence_timeout_number_->get_preference_hash());
     this->set_presence_timeout();
   }
 #endif

esphome/components/light/light_state.cpp

@@ -41,7 +41,7 @@ void LightState::setup() {
     case LIGHT_RESTORE_DEFAULT_ON:
     case LIGHT_RESTORE_INVERTED_DEFAULT_OFF:
     case LIGHT_RESTORE_INVERTED_DEFAULT_ON:
-      this->rtc_ = global_preferences->make_preference<LightStateRTCState>(this->get_object_id_hash());
+      this->rtc_ = global_preferences->make_preference<LightStateRTCState>(this->get_preference_hash());
       // Attempt to load from preferences, else fall back to default values
       if (!this->rtc_.load(&recovered)) {
         recovered.state = (this->restore_mode_ == LIGHT_RESTORE_DEFAULT_ON ||
@@ -54,7 +54,7 @@ void LightState::setup() {
       break;
     case LIGHT_RESTORE_AND_OFF:
     case LIGHT_RESTORE_AND_ON:
-      this->rtc_ = global_preferences->make_preference<LightStateRTCState>(this->get_object_id_hash());
+      this->rtc_ = global_preferences->make_preference<LightStateRTCState>(this->get_preference_hash());
       this->rtc_.load(&recovered);
       recovered.state = (this->restore_mode_ == LIGHT_RESTORE_AND_ON);
       break;

esphome/components/lvgl/number/lvgl_number.h

@@ -21,7 +21,7 @@ class LVGLNumber : public number::Number, public Component {
   void setup() override {
     float value = this->value_lambda_();
     if (this->restore_) {
-      this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+      this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
       if (this->pref_.load(&value)) {
         this->control_lambda_(value);
       }

esphome/components/lvgl/select/lvgl_select.h

@@ -20,7 +20,7 @@ class LVGLSelect : public select::Select, public Component {
     this->set_options_();
     if (this->restore_) {
       size_t index;
-      this->pref_ = global_preferences->make_preference<size_t>(this->get_object_id_hash());
+      this->pref_ = global_preferences->make_preference<size_t>(this->get_preference_hash());
       if (this->pref_.load(&index))
         this->widget_->set_selected_index(index, LV_ANIM_OFF);
     }

esphome/components/lvgl/widgets/canvas.py

@@ -24,7 +24,7 @@ from ..defines import (
     literal,
 )
 from ..lv_validation import (
-    lv_angle,
+    lv_angle_degrees,
     lv_bool,
     lv_color,
     lv_image,
@@ -395,15 +395,15 @@ ARC_PROPS = {
     DRAW_OPA_SCHEMA.extend(
         {
             cv.Required(CONF_RADIUS): pixels,
-            cv.Required(CONF_START_ANGLE): lv_angle,
+            cv.Required(CONF_START_ANGLE): lv_angle_degrees,
-            cv.Required(CONF_END_ANGLE): lv_angle,
+            cv.Required(CONF_END_ANGLE): lv_angle_degrees,
         }
     ).extend({cv.Optional(prop): validator for prop, validator in ARC_PROPS.items()}),
 )
 async def canvas_draw_arc(config, action_id, template_arg, args):
     radius = await size.process(config[CONF_RADIUS])
-    start_angle = await lv_angle.process(config[CONF_START_ANGLE])
+    start_angle = await lv_angle_degrees.process(config[CONF_START_ANGLE])
-    end_angle = await lv_angle.process(config[CONF_END_ANGLE])
+    end_angle = await lv_angle_degrees.process(config[CONF_END_ANGLE])
 
     async def do_draw_arc(w: Widget, x, y, dsc_addr):
         lv.canvas_draw_arc(w.obj, x, y, radius, start_angle, end_angle, dsc_addr)

esphome/components/lvgl/widgets/meter.py

@@ -14,7 +14,6 @@ from esphome.const import (
     CONF_VALUE,
     CONF_WIDTH,
 )
-from esphome.cpp_generator import IntLiteral
 
 from ..automation import action_to_code
 from ..defines import (
@@ -32,7 +31,7 @@ from ..helpers import add_lv_use, lvgl_components_required
 from ..lv_validation import (
     get_end_value,
     get_start_value,
-    lv_angle,
+    lv_angle_degrees,
     lv_bool,
     lv_color,
     lv_float,
@@ -163,7 +162,7 @@ SCALE_SCHEMA = cv.Schema(
         cv.Optional(CONF_RANGE_FROM, default=0.0): cv.float_,
         cv.Optional(CONF_RANGE_TO, default=100.0): cv.float_,
         cv.Optional(CONF_ANGLE_RANGE, default=270): cv.int_range(0, 360),
-        cv.Optional(CONF_ROTATION): lv_angle,
+        cv.Optional(CONF_ROTATION): lv_angle_degrees,
         cv.Optional(CONF_INDICATORS): cv.ensure_list(INDICATOR_SCHEMA),
     }
 )
@@ -188,9 +187,7 @@ class MeterType(WidgetType):
         for scale_conf in config.get(CONF_SCALES, ()):
             rotation = 90 + (360 - scale_conf[CONF_ANGLE_RANGE]) / 2
             if CONF_ROTATION in scale_conf:
-                rotation = await lv_angle.process(scale_conf[CONF_ROTATION])
+                rotation = await lv_angle_degrees.process(scale_conf[CONF_ROTATION])
-                if isinstance(rotation, IntLiteral):
-                    rotation = int(str(rotation)) // 10
             with LocalVariable(
                 "meter_var", "lv_meter_scale_t", lv_expr.meter_add_scale(var)
             ) as meter_var:

esphome/components/mipi_spi/models/jc.py

@@ -255,4 +255,233 @@ DriverChip(
     ),
 )
 
+DriverChip(
+    "JC3636W518V2",
+    height=360,
+    width=360,
+    offset_height=1,
+    draw_rounding=1,
+    cs_pin=10,
+    reset_pin=47,
+    invert_colors=True,
+    color_order=MODE_RGB,
+    bus_mode=TYPE_QUAD,
+    data_rate="40MHz",
+    initsequence=(
+        (0xF0, 0x28),
+        (0xF2, 0x28),
+        (0x73, 0xF0),
+        (0x7C, 0xD1),
+        (0x83, 0xE0),
+        (0x84, 0x61),
+        (0xF2, 0x82),
+        (0xF0, 0x00),
+        (0xF0, 0x01),
+        (0xF1, 0x01),
+        (0xB0, 0x56),
+        (0xB1, 0x4D),
+        (0xB2, 0x24),
+        (0xB4, 0x87),
+        (0xB5, 0x44),
+        (0xB6, 0x8B),
+        (0xB7, 0x40),
+        (0xB8, 0x86),
+        (0xBA, 0x00),
+        (0xBB, 0x08),
+        (0xBC, 0x08),
+        (0xBD, 0x00),
+        (0xC0, 0x80),
+        (0xC1, 0x10),
+        (0xC2, 0x37),
+        (0xC3, 0x80),
+        (0xC4, 0x10),
+        (0xC5, 0x37),
+        (0xC6, 0xA9),
+        (0xC7, 0x41),
+        (0xC8, 0x01),
+        (0xC9, 0xA9),
+        (0xCA, 0x41),
+        (0xCB, 0x01),
+        (0xD0, 0x91),
+        (0xD1, 0x68),
+        (0xD2, 0x68),
+        (0xF5, 0x00, 0xA5),
+        (0xDD, 0x4F),
+        (0xDE, 0x4F),
+        (0xF1, 0x10),
+        (0xF0, 0x00),
+        (0xF0, 0x02),
+        (
+            0xE0,
+            0xF0,
+            0x0A,
+            0x10,
+            0x09,
+            0x09,
+            0x36,
+            0x35,
+            0x33,
+            0x4A,
+            0x29,
+            0x15,
+            0x15,
+            0x2E,
+            0x34,
+        ),
+        (
+            0xE1,
+            0xF0,
+            0x0A,
+            0x0F,
+            0x08,
+            0x08,
+            0x05,
+            0x34,
+            0x33,
+            0x4A,
+            0x39,
+            0x15,
+            0x15,
+            0x2D,
+            0x33,
+        ),
+        (0xF0, 0x10),
+        (0xF3, 0x10),
+        (0xE0, 0x07),
+        (0xE1, 0x00),
+        (0xE2, 0x00),
+        (0xE3, 0x00),
+        (0xE4, 0xE0),
+        (0xE5, 0x06),
+        (0xE6, 0x21),
+        (0xE7, 0x01),
+        (0xE8, 0x05),
+        (0xE9, 0x02),
+        (0xEA, 0xDA),
+        (0xEB, 0x00),
+        (0xEC, 0x00),
+        (0xED, 0x0F),
+        (0xEE, 0x00),
+        (0xEF, 0x00),
+        (0xF8, 0x00),
+        (0xF9, 0x00),
+        (0xFA, 0x00),
+        (0xFB, 0x00),
+        (0xFC, 0x00),
+        (0xFD, 0x00),
+        (0xFE, 0x00),
+        (0xFF, 0x00),
+        (0x60, 0x40),
+        (0x61, 0x04),
+        (0x62, 0x00),
+        (0x63, 0x42),
+        (0x64, 0xD9),
+        (0x65, 0x00),
+        (0x66, 0x00),
+        (0x67, 0x00),
+        (0x68, 0x00),
+        (0x69, 0x00),
+        (0x6A, 0x00),
+        (0x6B, 0x00),
+        (0x70, 0x40),
+        (0x71, 0x03),
+        (0x72, 0x00),
+        (0x73, 0x42),
+        (0x74, 0xD8),
+        (0x75, 0x00),
+        (0x76, 0x00),
+        (0x77, 0x00),
+        (0x78, 0x00),
+        (0x79, 0x00),
+        (0x7A, 0x00),
+        (0x7B, 0x00),
+        (0x80, 0x48),
+        (0x81, 0x00),
+        (0x82, 0x06),
+        (0x83, 0x02),
+        (0x84, 0xD6),
+        (0x85, 0x04),
+        (0x86, 0x00),
+        (0x87, 0x00),
+        (0x88, 0x48),
+        (0x89, 0x00),
+        (0x8A, 0x08),
+        (0x8B, 0x02),
+        (0x8C, 0xD8),
+        (0x8D, 0x04),
+        (0x8E, 0x00),
+        (0x8F, 0x00),
+        (0x90, 0x48),
+        (0x91, 0x00),
+        (0x92, 0x0A),
+        (0x93, 0x02),
+        (0x94, 0xDA),
+        (0x95, 0x04),
+        (0x96, 0x00),
+        (0x97, 0x00),
+        (0x98, 0x48),
+        (0x99, 0x00),
+        (0x9A, 0x0C),
+        (0x9B, 0x02),
+        (0x9C, 0xDC),
+        (0x9D, 0x04),
+        (0x9E, 0x00),
+        (0x9F, 0x00),
+        (0xA0, 0x48),
+        (0xA1, 0x00),
+        (0xA2, 0x05),
+        (0xA3, 0x02),
+        (0xA4, 0xD5),
+        (0xA5, 0x04),
+        (0xA6, 0x00),
+        (0xA7, 0x00),
+        (0xA8, 0x48),
+        (0xA9, 0x00),
+        (0xAA, 0x07),
+        (0xAB, 0x02),
+        (0xAC, 0xD7),
+        (0xAD, 0x04),
+        (0xAE, 0x00),
+        (0xAF, 0x00),
+        (0xB0, 0x48),
+        (0xB1, 0x00),
+        (0xB2, 0x09),
+        (0xB3, 0x02),
+        (0xB4, 0xD9),
+        (0xB5, 0x04),
+        (0xB6, 0x00),
+        (0xB7, 0x00),
+        (0xB8, 0x48),
+        (0xB9, 0x00),
+        (0xBA, 0x0B),
+        (0xBB, 0x02),
+        (0xBC, 0xDB),
+        (0xBD, 0x04),
+        (0xBE, 0x00),
+        (0xBF, 0x00),
+        (0xC0, 0x10),
+        (0xC1, 0x47),
+        (0xC2, 0x56),
+        (0xC3, 0x65),
+        (0xC4, 0x74),
+        (0xC5, 0x88),
+        (0xC6, 0x99),
+        (0xC7, 0x01),
+        (0xC8, 0xBB),
+        (0xC9, 0xAA),
+        (0xD0, 0x10),
+        (0xD1, 0x47),
+        (0xD2, 0x56),
+        (0xD3, 0x65),
+        (0xD4, 0x74),
+        (0xD5, 0x88),
+        (0xD6, 0x99),
+        (0xD7, 0x01),
+        (0xD8, 0xBB),
+        (0xD9, 0xAA),
+        (0xF3, 0x01),
+        (0xF0, 0x00),
+    ),
+)
+
 models = {}

esphome/components/nrf52/__init__.py

@@ -119,8 +119,8 @@ async def to_code(config: ConfigType) -> None:
     cg.add_platformio_option(
         "platform_packages",
         [
-            "platformio/framework-zephyr@https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v2.6.1-4.zip",
+            "platformio/framework-zephyr@https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v2.6.1-7.zip",
-            "platformio/toolchain-gccarmnoneeabi@https://github.com/tomaszduda23/toolchain-sdk-ng/archive/refs/tags/v0.16.1-1.zip",
+            "platformio/toolchain-gccarmnoneeabi@https://github.com/tomaszduda23/toolchain-sdk-ng/archive/refs/tags/v0.17.4-0.zip",
         ],
     )
 

esphome/components/number/automation.cpp

@@ -15,7 +15,7 @@ void ValueRangeTrigger::setup() {
   float local_min = this->min_.value(0.0);
   float local_max = this->max_.value(0.0);
   convert hash = {.from = (local_max - local_min)};
-  uint32_t myhash = hash.to ^ this->parent_->get_object_id_hash();
+  uint32_t myhash = hash.to ^ this->parent_->get_preference_hash();
   this->rtc_ = global_preferences->make_preference<bool>(myhash);
   bool initial_state;
   if (this->rtc_.load(&initial_state)) {

esphome/components/opentherm/number/opentherm_number.cpp

@@ -17,7 +17,7 @@ void OpenthermNumber::setup() {
   if (!this->restore_value_) {
     value = this->initial_value_;
   } else {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     if (!this->pref_.load(&value)) {
       if (!std::isnan(this->initial_value_)) {
         value = this->initial_value_;

esphome/components/pvvx_mithermometer/display/pvvx_display.cpp

@@ -46,10 +46,32 @@ void PVVXDisplay::gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t
       }
       this->connection_established_ = true;
       this->char_handle_ = chr->handle;
-#ifdef USE_TIME
+
-      this->sync_time_();
+      // Attempt to write immediately
-#endif
+      // For devices without security, this will work
-      this->display();
+      // For devices with security that are already paired, this will work
+      // For devices that need pairing, the write will be retried after auth completes
+      this->sync_time_and_display_();
+      break;
+    }
+    default:
+      break;
+  }
+}
+
+void PVVXDisplay::gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) {
+  switch (event) {
+    case ESP_GAP_BLE_AUTH_CMPL_EVT: {
+      if (!this->parent_->check_addr(param->ble_security.auth_cmpl.bd_addr))
+        return;
+
+      if (param->ble_security.auth_cmpl.success) {
+        ESP_LOGD(TAG, "[%s] Authentication successful, performing writes.", this->parent_->address_str().c_str());
+        // Now that pairing is complete, perform the pending writes
+        this->sync_time_and_display_();
+      } else {
+        ESP_LOGW(TAG, "[%s] Authentication failed.", this->parent_->address_str().c_str());
+      }
       break;
     }
     default:
@@ -127,6 +149,13 @@ void PVVXDisplay::delayed_disconnect_() {
   this->set_timeout("disconnect", this->disconnect_delay_ms_, [this]() { this->parent_->set_enabled(false); });
 }
 
+void PVVXDisplay::sync_time_and_display_() {
+#ifdef USE_TIME
+  this->sync_time_();
+#endif
+  this->display();
+}
+
 #ifdef USE_TIME
 void PVVXDisplay::sync_time_() {
   if (this->time_ == nullptr)

esphome/components/pvvx_mithermometer/display/pvvx_display.h

@@ -43,6 +43,7 @@ class PVVXDisplay : public ble_client::BLEClientNode, public PollingComponent {
 
   void gattc_event_handler(esp_gattc_cb_event_t event, esp_gatt_if_t gattc_if,
                            esp_ble_gattc_cb_param_t *param) override;
+  void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param) override;
 
   /// Set validity period of the display information in seconds (1..65535)
   void set_validity_period(uint16_t validity_period) { this->validity_period_ = validity_period; }
@@ -112,6 +113,7 @@ class PVVXDisplay : public ble_client::BLEClientNode, public PollingComponent {
   void setcfgbit_(uint8_t bit, bool value);
   void send_to_setup_char_(uint8_t *blk, size_t size);
   void delayed_disconnect_();
+  void sync_time_and_display_();
 #ifdef USE_TIME
   void sync_time_();
   time::RealTimeClock *time_{nullptr};

esphome/components/rotary_encoder/rotary_encoder.cpp

@@ -132,7 +132,7 @@ void RotaryEncoderSensor::setup() {
   int32_t initial_value = 0;
   switch (this->restore_mode_) {
     case ROTARY_ENCODER_RESTORE_DEFAULT_ZERO:
-      this->rtc_ = global_preferences->make_preference<int32_t>(this->get_object_id_hash());
+      this->rtc_ = global_preferences->make_preference<int32_t>(this->get_preference_hash());
       if (!this->rtc_.load(&initial_value)) {
         initial_value = 0;
       }

esphome/components/sdm_meter/sensor.py

@@ -1,6 +1,5 @@
 import esphome.codegen as cg
 from esphome.components import modbus, sensor
-from esphome.components.atm90e32.sensor import CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C
 import esphome.config_validation as cv
 from esphome.const import (
     CONF_ACTIVE_POWER,
@@ -12,7 +11,10 @@ from esphome.const import (
     CONF_ID,
     CONF_IMPORT_ACTIVE_ENERGY,
     CONF_IMPORT_REACTIVE_ENERGY,
+    CONF_PHASE_A,
     CONF_PHASE_ANGLE,
+    CONF_PHASE_B,
+    CONF_PHASE_C,
     CONF_POWER_FACTOR,
     CONF_REACTIVE_POWER,
     CONF_TOTAL_POWER,

esphome/components/sensor/automation.h

@@ -40,7 +40,7 @@ class ValueRangeTrigger : public Trigger<float>, public Component {
   template<typename V> void set_max(V max) { this->max_ = max; }
 
   void setup() override {
-    this->rtc_ = global_preferences->make_preference<bool>(this->parent_->get_object_id_hash());
+    this->rtc_ = global_preferences->make_preference<bool>(this->parent_->get_preference_hash());
     bool initial_state;
     if (this->rtc_.load(&initial_state)) {
       this->previous_in_range_ = initial_state;

esphome/components/speaker/media_player/speaker_media_player.cpp

@@ -55,7 +55,7 @@ void SpeakerMediaPlayer::setup() {
 
   this->media_control_command_queue_ = xQueueCreate(MEDIA_CONTROLS_QUEUE_LENGTH, sizeof(MediaCallCommand));
 
-  this->pref_ = global_preferences->make_preference<VolumeRestoreState>(this->get_object_id_hash());
+  this->pref_ = global_preferences->make_preference<VolumeRestoreState>(this->get_preference_hash());
 
   VolumeRestoreState volume_restore_state;
   if (this->pref_.load(&volume_restore_state)) {

esphome/components/sprinkler/sprinkler.cpp

@@ -81,7 +81,7 @@ void SprinklerControllerNumber::setup() {
   if (!this->restore_value_) {
     value = this->initial_value_;
   } else {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     if (!this->pref_.load(&value)) {
       if (!std::isnan(this->initial_value_)) {
         value = this->initial_value_;

esphome/components/switch/switch.cpp

@@ -32,7 +32,7 @@ optional<bool> Switch::get_initial_state() {
   if (!(restore_mode & RESTORE_MODE_PERSISTENT_MASK))
     return {};
 
-  this->rtc_ = global_preferences->make_preference<bool>(this->get_object_id_hash());
+  this->rtc_ = global_preferences->make_preference<bool>(this->get_preference_hash());
   bool initial_state;
   if (!this->rtc_.load(&initial_state))
     return {};

esphome/components/template/alarm_control_panel/template_alarm_control_panel.cpp

@@ -86,7 +86,7 @@ void TemplateAlarmControlPanel::setup() {
       break;
     case ALARM_CONTROL_PANEL_RESTORE_DEFAULT_DISARMED: {
       uint8_t value;
-      this->pref_ = global_preferences->make_preference<uint8_t>(this->get_object_id_hash());
+      this->pref_ = global_preferences->make_preference<uint8_t>(this->get_preference_hash());
       if (this->pref_.load(&value)) {
         this->current_state_ = static_cast<alarm_control_panel::AlarmControlPanelState>(value);
       } else {

esphome/components/template/datetime/template_date.cpp

@@ -20,7 +20,7 @@ void TemplateDate::setup() {
   } else {
     datetime::DateEntityRestoreState temp;
     this->pref_ =
-        global_preferences->make_preference<datetime::DateEntityRestoreState>(194434030U ^ this->get_object_id_hash());
+        global_preferences->make_preference<datetime::DateEntityRestoreState>(194434030U ^ this->get_preference_hash());
     if (this->pref_.load(&temp)) {
       temp.apply(this);
       return;

esphome/components/template/datetime/template_datetime.cpp

@@ -19,8 +19,8 @@ void TemplateDateTime::setup() {
     state = this->initial_value_;
   } else {
     datetime::DateTimeEntityRestoreState temp;
-    this->pref_ = global_preferences->make_preference<datetime::DateTimeEntityRestoreState>(194434090U ^
+    this->pref_ = global_preferences->make_preference<datetime::DateTimeEntityRestoreState>(
-                                                                                            this->get_object_id_hash());
+        194434090U ^ this->get_preference_hash());
     if (this->pref_.load(&temp)) {
       temp.apply(this);
       return;

esphome/components/template/datetime/template_time.cpp

@@ -20,7 +20,7 @@ void TemplateTime::setup() {
   } else {
     datetime::TimeEntityRestoreState temp;
     this->pref_ =
-        global_preferences->make_preference<datetime::TimeEntityRestoreState>(194434060U ^ this->get_object_id_hash());
+        global_preferences->make_preference<datetime::TimeEntityRestoreState>(194434060U ^ this->get_preference_hash());
     if (this->pref_.load(&temp)) {
       temp.apply(this);
       return;

esphome/components/template/number/template_number.cpp

@@ -14,7 +14,7 @@ void TemplateNumber::setup() {
   if (!this->restore_value_) {
     value = this->initial_value_;
   } else {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     if (!this->pref_.load(&value)) {
       if (!std::isnan(this->initial_value_)) {
         value = this->initial_value_;

esphome/components/template/select/template_select.cpp

@@ -16,7 +16,7 @@ void TemplateSelect::setup() {
     ESP_LOGD(TAG, "State from initial: %s", value.c_str());
   } else {
     size_t index;
-    this->pref_ = global_preferences->make_preference<size_t>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<size_t>(this->get_preference_hash());
     if (!this->pref_.load(&index)) {
       value = this->initial_option_;
       ESP_LOGD(TAG, "State from initial (could not load stored index): %s", value.c_str());

esphome/components/template/text/template_text.cpp

@@ -15,7 +15,7 @@ void TemplateText::setup() {
   if (!this->pref_) {
     ESP_LOGD(TAG, "State from initial: %s", value.c_str());
   } else {
-    uint32_t key = this->get_object_id_hash();
+    uint32_t key = this->get_preference_hash();
     key += this->traits.get_min_length() << 2;
     key += this->traits.get_max_length() << 4;
     key += fnv1_hash(this->traits.get_pattern()) << 6;

esphome/components/total_daily_energy/total_daily_energy.cpp

@@ -10,7 +10,7 @@ void TotalDailyEnergy::setup() {
   float initial_value = 0;
 
   if (this->restore_) {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
     this->pref_.load(&initial_value);
   }
   this->publish_state_and_save(initial_value);

esphome/components/tuya/number/tuya_number.cpp

@@ -8,7 +8,7 @@ static const char *const TAG = "tuya.number";
 
 void TuyaNumber::setup() {
   if (this->restore_value_) {
-    this->pref_ = global_preferences->make_preference<float>(this->get_object_id_hash());
+    this->pref_ = global_preferences->make_preference<float>(this->get_preference_hash());
   }
 
   this->parent_->register_listener(this->number_id_, [this](const TuyaDatapoint &datapoint) {

esphome/components/valve/valve.cpp

@@ -155,7 +155,7 @@ void Valve::publish_state(bool save) {
   }
 }
 optional<ValveRestoreState> Valve::restore_state_() {
-  this->rtc_ = global_preferences->make_preference<ValveRestoreState>(this->get_object_id_hash());
+  this->rtc_ = global_preferences->make_preference<ValveRestoreState>(this->get_preference_hash());
   ValveRestoreState recovered{};
   if (!this->rtc_.load(&recovered))
     return {};

esphome/components/web_server/__init__.py

@@ -52,9 +52,9 @@ def default_url(config: ConfigType) -> ConfigType:
     config = config.copy()
     if config[CONF_VERSION] == 1:
         if CONF_CSS_URL not in config:
-            config[CONF_CSS_URL] = "https://esphome.io/_static/webserver-v1.min.css"
+            config[CONF_CSS_URL] = "https://oi.esphome.io/v1/webserver-v1.min.css"
         if CONF_JS_URL not in config:
-            config[CONF_JS_URL] = "https://esphome.io/_static/webserver-v1.min.js"
+            config[CONF_JS_URL] = "https://oi.esphome.io/v1/webserver-v1.min.js"
     if config[CONF_VERSION] == 2:
         if CONF_CSS_URL not in config:
             config[CONF_CSS_URL] = ""

esphome/components/web_server/web_server.h

@@ -173,14 +173,14 @@ class WebServer : public Controller, public Component, public AsyncWebHandler {
 
 #if USE_WEBSERVER_VERSION == 1
   /** Set the URL to the CSS <link> that's sent to each client. Defaults to
-   * https://esphome.io/_static/webserver-v1.min.css
+   * https://oi.esphome.io/v1/webserver-v1.min.css
    *
    * @param css_url The url to the web server stylesheet.
    */
   void set_css_url(const char *css_url);
 
   /** Set the URL to the script that's embedded in the index page. Defaults to
-   * https://esphome.io/_static/webserver-v1.min.js
+   * https://oi.esphome.io/v1/webserver-v1.min.js
    *
    * @param js_url The url to the web server script.
    */

esphome/components/web_server_idf/web_server_idf.cpp

@@ -253,7 +253,7 @@ bool AsyncWebServerRequest::authenticate(const char *username, const char *passw
   esp_crypto_base64_encode(reinterpret_cast<uint8_t *>(digest.get()), n, &out,
                            reinterpret_cast<const uint8_t *>(user_info.c_str()), user_info.size());
 
-  return strncmp(digest.get(), auth_str + auth_prefix_len, auth.value().size() - auth_prefix_len) == 0;
+  return strcmp(digest.get(), auth_str + auth_prefix_len) == 0;
 }
 
 void AsyncWebServerRequest::requestAuthentication(const char *realm) const {

esphome/config_validation.py

@@ -1112,7 +1112,7 @@ voltage = float_with_unit("voltage", "(v|V|volt|Volts)?")
 distance = float_with_unit("distance", "(m)")
 framerate = float_with_unit("framerate", "(FPS|fps|Fps|FpS|Hz)")
 angle = float_with_unit("angle", "(°|deg)", optional_unit=True)
-_temperature_c = float_with_unit("temperature", "(°C|° C|°|C)?")
+_temperature_c = float_with_unit("temperature", "(°C|° C|C|°)?")
 _temperature_k = float_with_unit("temperature", "(°K|° K|K)?")
 _temperature_f = float_with_unit("temperature", "(°F|° F|F)?")
 decibel = float_with_unit("decibel", "(dB|dBm|db|dbm)", optional_unit=True)

esphome/core/base_automation.h

@@ -5,6 +5,8 @@
 #include "esphome/core/hal.h"
 #include "esphome/core/defines.h"
 #include "esphome/core/preferences.h"
+#include "esphome/core/scheduler.h"
+#include "esphome/core/application.h"
 
 #include <vector>
 
@@ -158,7 +160,16 @@ template<typename... Ts> class DelayAction : public Action<Ts...>, public Compon
   void play_complex(Ts... x) override {
     auto f = std::bind(&DelayAction<Ts...>::play_next_, this, x...);
     this->num_running_++;
-    this->set_timeout("delay", this->delay_.value(x...), f);
+
+    // If num_running_ > 1, we have multiple instances running in parallel
+    // In single/restart/queued modes, only one instance runs at a time
+    // Parallel mode uses skip_cancel=true to allow multiple delays to coexist
+    // WARNING: This can accumulate delays if scripts are triggered faster than they complete!
+    // Users should set max_runs on parallel scripts to limit concurrent executions.
+    // Issue #10264: This is a workaround for parallel script delays interfering with each other.
+    App.scheduler.set_timer_common_(this, Scheduler::SchedulerItem::TIMEOUT,
+                                    /* is_static_string= */ true, "delay", this->delay_.value(x...), std::move(f),
+                                    /* is_retry= */ false, /* skip_cancel= */ this->num_running_ > 1);
   }
   float get_setup_priority() const override { return setup_priority::HARDWARE; }
 

esphome/core/entity_base.h

@@ -85,6 +85,35 @@ class EntityBase {
   // Set has_state - for components that need to manually set this
   void set_has_state(bool state) { this->flags_.has_state = state; }
 
+  /**
+   * @brief Get a unique hash for storing preferences/settings for this entity.
+   *
+   * This method returns a hash that uniquely identifies the entity for the purpose of
+   * storing preferences (such as calibration, state, etc.). Unlike get_object_id_hash(),
+   * this hash also incorporates the device_id (if devices are enabled), ensuring uniqueness
+   * across multiple devices that may have entities with the same object_id.
+   *
+   * Use this method when storing or retrieving preferences/settings that should be unique
+   * per device-entity pair. Use get_object_id_hash() when you need a hash that identifies
+   * the entity regardless of the device it belongs to.
+   *
+   * For backward compatibility, if device_id is 0 (the main device), the hash is unchanged
+   * from previous versions, so existing single-device configurations will continue to work.
+   *
+   * @return uint32_t The unique hash for preferences, including device_id if available.
+   */
+  uint32_t get_preference_hash() {
+#ifdef USE_DEVICES
+    // Combine object_id_hash with device_id to ensure uniqueness across devices
+    // Note: device_id is 0 for the main device, so XORing with 0 preserves the original hash
+    // This ensures backward compatibility for existing single-device configurations
+    return this->get_object_id_hash() ^ this->get_device_id();
+#else
+    // Without devices, just use object_id_hash as before
+    return this->get_object_id_hash();
+#endif
+  }
+
  protected:
   friend class api::APIConnection;
 

esphome/core/entity_helpers.py

@@ -236,10 +236,21 @@ def entity_duplicate_validator(platform: str) -> Callable[[ConfigType], ConfigTy
             if existing_component != "unknown":
                 conflict_msg += f" from component '{existing_component}'"
 
+            # Show both original names and their ASCII-only versions if they differ
+            sanitized_msg = ""
+            if entity_name != existing_name:
+                sanitized_msg = (
+                    f"\n  Original names: '{entity_name}' and '{existing_name}'"
+                    f"\n  Both convert to ASCII ID: '{name_key}'"
+                    "\n  To fix: Add unique ASCII characters (e.g., '1', '2', or 'A', 'B')"
+                    "\n          to distinguish them"
+                )
+
             raise cv.Invalid(
                 f"Duplicate {platform} entity with name '{entity_name}' found{device_prefix}. "
                 f"{conflict_msg}. "
-                f"Each entity on a device must have a unique name within its platform."
+                "Each entity on a device must have a unique name within its platform."
+                f"{sanitized_msg}"
             )
 
         # Store metadata about this entity

esphome/core/scheduler.cpp

@@ -65,14 +65,17 @@ static void validate_static_string(const char *name) {
 
 // Common implementation for both timeout and interval
 void HOT Scheduler::set_timer_common_(Component *component, SchedulerItem::Type type, bool is_static_string,
-                                      const void *name_ptr, uint32_t delay, std::function<void()> func, bool is_retry) {
+                                      const void *name_ptr, uint32_t delay, std::function<void()> func, bool is_retry,
+                                      bool skip_cancel) {
   // Get the name as const char*
   const char *name_cstr = this->get_name_cstr_(is_static_string, name_ptr);
 
   if (delay == SCHEDULER_DONT_RUN) {
     // Still need to cancel existing timer if name is not empty
+    if (!skip_cancel) {
       LockGuard guard{this->lock_};
       this->cancel_item_locked_(component, name_cstr, type);
+    }
     return;
   }
 
@@ -97,7 +100,9 @@ void HOT Scheduler::set_timer_common_(Component *component, SchedulerItem::Type
   if (delay == 0 && type == SchedulerItem::TIMEOUT) {
     // Put in defer queue for guaranteed FIFO execution
     LockGuard guard{this->lock_};
+    if (!skip_cancel) {
       this->cancel_item_locked_(component, name_cstr, type);
+    }
     this->defer_queue_.push_back(std::move(item));
     return;
   }
@@ -150,9 +155,11 @@ void HOT Scheduler::set_timer_common_(Component *component, SchedulerItem::Type
     return;
   }
 
-  // If name is provided, do atomic cancel-and-add
+  // If name is provided, do atomic cancel-and-add (unless skip_cancel is true)
   // Cancel existing items
+  if (!skip_cancel) {
     this->cancel_item_locked_(component, name_cstr, type);
+  }
   // Add new item directly to to_add_
   // since we have the lock held
   this->to_add_.push_back(std::move(item));

esphome/core/scheduler.h

@@ -21,8 +21,13 @@ struct RetryArgs;
 void retry_handler(const std::shared_ptr<RetryArgs> &args);
 
 class Scheduler {
-  // Allow retry_handler to access protected members
+  // Allow retry_handler to access protected members for internal retry mechanism
   friend void ::esphome::retry_handler(const std::shared_ptr<RetryArgs> &args);
+  // Allow DelayAction to call set_timer_common_ with skip_cancel=true for parallel script delays.
+  // This is needed to fix issue #10264 where parallel scripts with delays interfere with each other.
+  // We use friend instead of a public API because skip_cancel is dangerous - it can cause delays
+  // to accumulate and overload the scheduler if misused.
+  template<typename... Ts> friend class DelayAction;
 
  public:
   // Public API - accepts std::string for backward compatibility
@@ -184,7 +189,7 @@ class Scheduler {
 
   // Common implementation for both timeout and interval
   void set_timer_common_(Component *component, SchedulerItem::Type type, bool is_static_string, const void *name_ptr,
-                         uint32_t delay, std::function<void()> func, bool is_retry = false);
+                         uint32_t delay, std::function<void()> func, bool is_retry = false, bool skip_cancel = false);
 
   // Common implementation for retry
   void set_retry_common_(Component *component, bool is_static_string, const void *name_ptr, uint32_t initial_wait_time,

platformio.ini

@@ -221,8 +221,8 @@ extends = common
 platform = https://github.com/tomaszduda23/platform-nordicnrf52/archive/refs/tags/v10.3.0-1.zip
 framework = zephyr
 platform_packages =
-    platformio/framework-zephyr @ https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v2.6.1-4.zip
+    platformio/framework-zephyr @ https://github.com/tomaszduda23/framework-sdk-nrf/archive/refs/tags/v2.6.1-7.zip
-    platformio/toolchain-gccarmnoneeabi@https://github.com/tomaszduda23/toolchain-sdk-ng/archive/refs/tags/v0.16.1-1.zip
+    platformio/toolchain-gccarmnoneeabi@https://github.com/tomaszduda23/toolchain-sdk-ng/archive/refs/tags/v0.17.4-0.zip
 build_flags =
     ${common.build_flags}
     -DUSE_ZEPHYR

requirements_test.txt

@@ -1,6 +1,6 @@
 pylint==3.3.8
 flake8==7.3.0  # also change in .pre-commit-config.yaml when updating
-ruff==0.12.9  # also change in .pre-commit-config.yaml when updating
+ruff==0.12.10  # also change in .pre-commit-config.yaml when updating
 pyupgrade==3.20.0  # also change in .pre-commit-config.yaml when updating
 pre-commit
 

tests/components/deep_sleep/test.esp32-c6-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  wakeup_pin: GPIO4
+
+<<: !include common.yaml
+<<: !include common-esp32.yaml

tests/components/deep_sleep/test.esp32-s2-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  wakeup_pin: GPIO4
+
+<<: !include common.yaml
+<<: !include common-esp32.yaml

tests/components/deep_sleep/test.esp32-s3-idf.yaml

@@ -0,0 +1,5 @@
+substitutions:
+  wakeup_pin: GPIO4
+
+<<: !include common.yaml
+<<: !include common-esp32.yaml

tests/components/esp32_ble_tracker/test-on-scan-end.esp32-idf.yaml

@@ -0,0 +1,3 @@
+esp32_ble_tracker:
+  on_scan_end:
+    - logger.log: "Scan ended!"

tests/integration/fixtures/light_calls.yaml

@@ -56,10 +56,29 @@ light:
     warm_white_color_temperature: 2000 K
     constant_brightness: true
     effects:
+      # Use default parameters:
       - random:
-          name: "Random Effect"
+      # Customize parameters - use longer names to potentially trigger buffer issues
+      - random:
+          name: "My Very Slow Random Effect With Long Name"
+          transition_length: 30ms
+          update_interval: 30ms
+      - random:
+          name: "My Fast Random Effect That Changes Quickly"
+          transition_length: 4ms
+          update_interval: 5ms
+      - random:
+          name: "Random Effect With Medium Length Name Here"
           transition_length: 100ms
           update_interval: 200ms
+      - random:
+          name: "Another Random Effect With Different Parameters"
+          transition_length: 2ms
+          update_interval: 3ms
+      - random:
+          name: "Yet Another Random Effect To Test Memory"
+          transition_length: 15ms
+          update_interval: 20ms
       - strobe:
           name: "Strobe Effect"
       - pulse:
@@ -73,6 +92,17 @@ light:
     red: test_red
     green: test_green
     blue: test_blue
+    effects:
+      # Same random effects to test for cross-contamination
+      - random:
+      - random:
+          name: "RGB Slow Random"
+          transition_length: 20ms
+          update_interval: 25ms
+      - random:
+          name: "RGB Fast Random"
+          transition_length: 2ms
+          update_interval: 3ms
 
   - platform: binary
     name: "Test Binary Light"

tests/integration/fixtures/multi_device_preferences.yaml

@@ -0,0 +1,165 @@
+esphome:
+  name: multi-device-preferences-test
+  # Define multiple devices for testing preference storage
+  devices:
+    - id: device_a
+      name: Device A
+    - id: device_b
+      name: Device B
+
+host:
+api:  # Port will be automatically injected
+logger:
+  level: DEBUG
+
+# Test entities with restore modes to verify preference storage
+
+# Switches with same name on different devices - test restore mode
+switch:
+  - platform: template
+    name: Light
+    id: light_device_a
+    device_id: device_a
+    restore_mode: RESTORE_DEFAULT_OFF
+    turn_on_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device A Light turned ON");
+    turn_off_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device A Light turned OFF");
+
+  - platform: template
+    name: Light
+    id: light_device_b
+    device_id: device_b
+    restore_mode: RESTORE_DEFAULT_ON  # Different default to test uniqueness
+    turn_on_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device B Light turned ON");
+    turn_off_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device B Light turned OFF");
+
+  - platform: template
+    name: Light
+    id: light_main
+    restore_mode: RESTORE_DEFAULT_OFF
+    turn_on_action:
+      - lambda: |-
+          ESP_LOGI("test", "Main Light turned ON");
+    turn_off_action:
+      - lambda: |-
+          ESP_LOGI("test", "Main Light turned OFF");
+
+# Numbers with restore to test preference storage
+number:
+  - platform: template
+    name: Setpoint
+    id: setpoint_device_a
+    device_id: device_a
+    min_value: 10.0
+    max_value: 30.0
+    step: 0.5
+    restore_value: true
+    initial_value: 20.0
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device A Setpoint set to %.1f", x);
+          id(setpoint_device_a).state = x;
+
+  - platform: template
+    name: Setpoint
+    id: setpoint_device_b
+    device_id: device_b
+    min_value: 10.0
+    max_value: 30.0
+    step: 0.5
+    restore_value: true
+    initial_value: 25.0  # Different initial to test uniqueness
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device B Setpoint set to %.1f", x);
+          id(setpoint_device_b).state = x;
+
+  - platform: template
+    name: Setpoint
+    id: setpoint_main
+    min_value: 10.0
+    max_value: 30.0
+    step: 0.5
+    restore_value: true
+    initial_value: 22.0
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Main Setpoint set to %.1f", x);
+          id(setpoint_main).state = x;
+
+# Selects with restore to test preference storage
+select:
+  - platform: template
+    name: Mode
+    id: mode_device_a
+    device_id: device_a
+    options:
+      - "Auto"
+      - "Manual"
+      - "Off"
+    restore_value: true
+    initial_option: "Auto"
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device A Mode set to %s", x.c_str());
+          id(mode_device_a).state = x;
+
+  - platform: template
+    name: Mode
+    id: mode_device_b
+    device_id: device_b
+    options:
+      - "Auto"
+      - "Manual"
+      - "Off"
+    restore_value: true
+    initial_option: "Manual"  # Different initial to test uniqueness
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Device B Mode set to %s", x.c_str());
+          id(mode_device_b).state = x;
+
+  - platform: template
+    name: Mode
+    id: mode_main
+    options:
+      - "Auto"
+      - "Manual"
+      - "Off"
+    restore_value: true
+    initial_option: "Off"
+    set_action:
+      - lambda: |-
+          ESP_LOGI("test", "Main Mode set to %s", x.c_str());
+          id(mode_main).state = x;
+
+# Button to trigger preference logging test
+button:
+  - platform: template
+    name: Test Preferences
+    on_press:
+      - lambda: |-
+          ESP_LOGI("test", "Testing preference storage uniqueness:");
+          ESP_LOGI("test", "Device A Light state: %s", id(light_device_a).state ? "ON" : "OFF");
+          ESP_LOGI("test", "Device B Light state: %s", id(light_device_b).state ? "ON" : "OFF");
+          ESP_LOGI("test", "Main Light state: %s", id(light_main).state ? "ON" : "OFF");
+          ESP_LOGI("test", "Device A Setpoint: %.1f", id(setpoint_device_a).state);
+          ESP_LOGI("test", "Device B Setpoint: %.1f", id(setpoint_device_b).state);
+          ESP_LOGI("test", "Main Setpoint: %.1f", id(setpoint_main).state);
+          ESP_LOGI("test", "Device A Mode: %s", id(mode_device_a).state.c_str());
+          ESP_LOGI("test", "Device B Mode: %s", id(mode_device_b).state.c_str());
+          ESP_LOGI("test", "Main Mode: %s", id(mode_main).state.c_str());
+          // Log preference hashes for entities that actually store preferences
+          ESP_LOGI("test", "Device A Switch Pref Hash: %u", id(light_device_a).get_preference_hash());
+          ESP_LOGI("test", "Device B Switch Pref Hash: %u", id(light_device_b).get_preference_hash());
+          ESP_LOGI("test", "Main Switch Pref Hash: %u", id(light_main).get_preference_hash());
+          ESP_LOGI("test", "Device A Number Pref Hash: %u", id(setpoint_device_a).get_preference_hash());
+          ESP_LOGI("test", "Device B Number Pref Hash: %u", id(setpoint_device_b).get_preference_hash());
+          ESP_LOGI("test", "Main Number Pref Hash: %u", id(setpoint_main).get_preference_hash());

tests/integration/fixtures/parallel_script_delays.yaml

@@ -0,0 +1,45 @@
+esphome:
+  name: test-parallel-delays
+
+host:
+
+logger:
+  level: DEBUG
+
+api:
+  actions:
+    - action: test_parallel_delays
+      then:
+        # Start three parallel script instances with small delays between starts
+        - globals.set:
+            id: instance_counter
+            value: '1'
+        - script.execute: parallel_delay_script
+        - delay: 10ms
+        - globals.set:
+            id: instance_counter
+            value: '2'
+        - script.execute: parallel_delay_script
+        - delay: 10ms
+        - globals.set:
+            id: instance_counter
+            value: '3'
+        - script.execute: parallel_delay_script
+
+globals:
+  - id: instance_counter
+    type: int
+    initial_value: '0'
+
+script:
+  - id: parallel_delay_script
+    mode: parallel
+    then:
+      - lambda: !lambda |-
+          int instance = id(instance_counter);
+          ESP_LOGI("TEST", "Parallel script instance %d started", instance);
+      - delay: 1s
+      - lambda: !lambda |-
+          static int completed_counter = 0;
+          completed_counter++;
+          ESP_LOGI("TEST", "Parallel script instance %d completed after delay", completed_counter);

tests/integration/test_automations.py

@@ -89,3 +89,73 @@ async def test_delay_action_cancellation(
         assert 0.4 < time_from_second_start < 0.6, (
             f"Delay completed {time_from_second_start:.3f}s after second start, expected ~0.5s"
         )
+
+
+@pytest.mark.asyncio
+async def test_parallel_script_delays(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """Test that parallel scripts with delays don't interfere with each other."""
+    loop = asyncio.get_running_loop()
+
+    # Track script executions
+    script_starts: list[float] = []
+    script_ends: list[float] = []
+
+    # Patterns to match
+    start_pattern = re.compile(r"Parallel script instance \d+ started")
+    end_pattern = re.compile(r"Parallel script instance \d+ completed after delay")
+
+    # Future to track when all scripts have completed
+    all_scripts_completed = loop.create_future()
+
+    def check_output(line: str) -> None:
+        """Check log output for parallel script messages."""
+        current_time = loop.time()
+
+        if start_pattern.search(line):
+            script_starts.append(current_time)
+
+        if end_pattern.search(line):
+            script_ends.append(current_time)
+            # Check if we have all 3 completions
+            if len(script_ends) == 3 and not all_scripts_completed.done():
+                all_scripts_completed.set_result(True)
+
+    async with (
+        run_compiled(yaml_config, line_callback=check_output),
+        api_client_connected() as client,
+    ):
+        # Get services
+        entities, services = await client.list_entities_services()
+
+        # Find our test service
+        test_service = next(
+            (s for s in services if s.name == "test_parallel_delays"), None
+        )
+        assert test_service is not None, "test_parallel_delays service not found"
+
+        # Execute the test - this will start 3 parallel scripts with 1 second delays
+        client.execute_service(test_service, {})
+
+        # Wait for all scripts to complete (should take ~1 second, not 3)
+        await asyncio.wait_for(all_scripts_completed, timeout=2.0)
+
+        # Verify we had 3 starts and 3 ends
+        assert len(script_starts) == 3, (
+            f"Expected 3 script starts, got {len(script_starts)}"
+        )
+        assert len(script_ends) == 3, f"Expected 3 script ends, got {len(script_ends)}"
+
+        # Verify they ran in parallel - all should complete within ~1.5 seconds
+        first_start = min(script_starts)
+        last_end = max(script_ends)
+        total_time = last_end - first_start
+
+        # If running in parallel, total time should be close to 1 second
+        # If they were interfering (running sequentially), it would take 3+ seconds
+        assert total_time < 1.5, (
+            f"Parallel scripts took {total_time:.2f}s total, should be ~1s if running in parallel"
+        )

tests/integration/test_light_calls.py

@@ -108,14 +108,51 @@ async def test_light_calls(
         # Wait for flash to end
         state = await wait_for_state_change(rgbcw_light.key)
 
-        # Test 13: effect only
+        # Test 13: effect only - test all random effects
         # First ensure light is on
         client.light_command(key=rgbcw_light.key, state=True)
         state = await wait_for_state_change(rgbcw_light.key)
-        # Now set effect
+
-        client.light_command(key=rgbcw_light.key, effect="Random Effect")
+        # Test 13a: Default random effect (no name, gets default name "Random")
+        client.light_command(key=rgbcw_light.key, effect="Random")
         state = await wait_for_state_change(rgbcw_light.key)
-        assert state.effect == "Random Effect"
+        assert state.effect == "Random"
+
+        # Test 13b: Slow random effect with long name
+        client.light_command(
+            key=rgbcw_light.key, effect="My Very Slow Random Effect With Long Name"
+        )
+        state = await wait_for_state_change(rgbcw_light.key)
+        assert state.effect == "My Very Slow Random Effect With Long Name"
+
+        # Test 13c: Fast random effect with long name
+        client.light_command(
+            key=rgbcw_light.key, effect="My Fast Random Effect That Changes Quickly"
+        )
+        state = await wait_for_state_change(rgbcw_light.key)
+        assert state.effect == "My Fast Random Effect That Changes Quickly"
+
+        # Test 13d: Random effect with medium length name
+        client.light_command(
+            key=rgbcw_light.key, effect="Random Effect With Medium Length Name Here"
+        )
+        state = await wait_for_state_change(rgbcw_light.key)
+        assert state.effect == "Random Effect With Medium Length Name Here"
+
+        # Test 13e: Another random effect
+        client.light_command(
+            key=rgbcw_light.key,
+            effect="Another Random Effect With Different Parameters",
+        )
+        state = await wait_for_state_change(rgbcw_light.key)
+        assert state.effect == "Another Random Effect With Different Parameters"
+
+        # Test 13f: Yet another random effect
+        client.light_command(
+            key=rgbcw_light.key, effect="Yet Another Random Effect To Test Memory"
+        )
+        state = await wait_for_state_change(rgbcw_light.key)
+        assert state.effect == "Yet Another Random Effect To Test Memory"
 
         # Test 14: stop effect
         client.light_command(key=rgbcw_light.key, effect="None")

tests/integration/test_multi_device_preferences.py

@@ -0,0 +1,144 @@
+"""Test multi-device preference storage functionality."""
+
+from __future__ import annotations
+
+import asyncio
+import re
+
+from aioesphomeapi import ButtonInfo, NumberInfo, SelectInfo, SwitchInfo
+import pytest
+
+from .types import APIClientConnectedFactory, RunCompiledFunction
+
+
+@pytest.mark.asyncio
+async def test_multi_device_preferences(
+    yaml_config: str,
+    run_compiled: RunCompiledFunction,
+    api_client_connected: APIClientConnectedFactory,
+) -> None:
+    """Test that entities with same names on different devices have unique preference storage."""
+    loop = asyncio.get_running_loop()
+    log_lines: list[str] = []
+    preferences_logged = loop.create_future()
+
+    # Patterns to match preference hash logs
+    switch_hash_pattern_device = re.compile(r"Device ([AB]) Switch Pref Hash: (\d+)")
+    switch_hash_pattern_main = re.compile(r"Main Switch Pref Hash: (\d+)")
+    number_hash_pattern_device = re.compile(r"Device ([AB]) Number Pref Hash: (\d+)")
+    number_hash_pattern_main = re.compile(r"Main Number Pref Hash: (\d+)")
+    switch_hashes: dict[str, int] = {}
+    number_hashes: dict[str, int] = {}
+
+    def check_output(line: str) -> None:
+        """Check log output for preference hash information."""
+        log_lines.append(line)
+
+        # Look for device switch preference hash logs
+        match = switch_hash_pattern_device.search(line)
+        if match:
+            device = match.group(1)
+            hash_value = int(match.group(2))
+            switch_hashes[device] = hash_value
+
+        # Look for main switch preference hash
+        match = switch_hash_pattern_main.search(line)
+        if match:
+            hash_value = int(match.group(1))
+            switch_hashes["Main"] = hash_value
+
+        # Look for device number preference hash logs
+        match = number_hash_pattern_device.search(line)
+        if match:
+            device = match.group(1)
+            hash_value = int(match.group(2))
+            number_hashes[device] = hash_value
+
+        # Look for main number preference hash
+        match = number_hash_pattern_main.search(line)
+        if match:
+            hash_value = int(match.group(1))
+            number_hashes["Main"] = hash_value
+
+        # If we have all hashes, complete the future
+        if (
+            len(switch_hashes) == 3
+            and len(number_hashes) == 3
+            and not preferences_logged.done()
+        ):
+            preferences_logged.set_result(True)
+
+    async with (
+        run_compiled(yaml_config, line_callback=check_output),
+        api_client_connected() as client,
+    ):
+        # Get entity list
+        entities, _ = await client.list_entities_services()
+
+        # Verify we have the expected entities with duplicate names on different devices
+
+        # Check switches (3 with name "Light")
+        switches = [
+            e for e in entities if isinstance(e, SwitchInfo) and e.name == "Light"
+        ]
+        assert len(switches) == 3, f"Expected 3 'Light' switches, got {len(switches)}"
+
+        # Check numbers (3 with name "Setpoint")
+        numbers = [
+            e for e in entities if isinstance(e, NumberInfo) and e.name == "Setpoint"
+        ]
+        assert len(numbers) == 3, f"Expected 3 'Setpoint' numbers, got {len(numbers)}"
+
+        # Check selects (3 with name "Mode")
+        selects = [
+            e for e in entities if isinstance(e, SelectInfo) and e.name == "Mode"
+        ]
+        assert len(selects) == 3, f"Expected 3 'Mode' selects, got {len(selects)}"
+
+        # Find the test button entity to trigger preference logging
+        buttons = [e for e in entities if isinstance(e, ButtonInfo)]
+        test_button = next((b for b in buttons if b.name == "Test Preferences"), None)
+        assert test_button is not None, "Test Preferences button not found"
+
+        # Press the button to trigger logging
+        client.button_command(test_button.key)
+
+        # Wait for preference hashes to be logged
+        try:
+            await asyncio.wait_for(preferences_logged, timeout=5.0)
+        except TimeoutError:
+            pytest.fail("Preference hashes not logged within timeout")
+
+        # Verify all switch preference hashes are unique
+        assert len(switch_hashes) == 3, (
+            f"Expected 3 devices with switches, got {switch_hashes}"
+        )
+        switch_hash_values = list(switch_hashes.values())
+        assert len(switch_hash_values) == len(set(switch_hash_values)), (
+            f"Switch preference hashes are not unique: {switch_hashes}"
+        )
+
+        # Verify all number preference hashes are unique
+        assert len(number_hashes) == 3, (
+            f"Expected 3 devices with numbers, got {number_hashes}"
+        )
+        number_hash_values = list(number_hashes.values())
+        assert len(number_hash_values) == len(set(number_hash_values)), (
+            f"Number preference hashes are not unique: {number_hashes}"
+        )
+
+        # Verify Device A and Device B have different hashes (they have device_id set)
+        assert switch_hashes["A"] != switch_hashes["B"], (
+            f"Device A and B switches should have different hashes: A={switch_hashes['A']}, B={switch_hashes['B']}"
+        )
+        assert number_hashes["A"] != number_hashes["B"], (
+            f"Device A and B numbers should have different hashes: A={number_hashes['A']}, B={number_hashes['B']}"
+        )
+
+        # Verify Main device hash is different from both A and B
+        assert switch_hashes["Main"] != switch_hashes["A"], (
+            f"Main and Device A switches should have different hashes: Main={switch_hashes['Main']}, A={switch_hashes['A']}"
+        )
+        assert switch_hashes["Main"] != switch_hashes["B"], (
+            f"Main and Device B switches should have different hashes: Main={switch_hashes['Main']}, B={switch_hashes['B']}"
+        )

tests/unit_tests/core/test_entity_helpers.py

@@ -705,3 +705,48 @@ def test_empty_or_null_device_id_on_entity() -> None:
     config2 = {CONF_NAME: "Temperature", CONF_DEVICE_ID: None}
     validated2 = validator(config2)
     assert validated2 == config2
+
+
+def test_entity_duplicate_validator_non_ascii_names() -> None:
+    """Test that non-ASCII names show helpful error messages."""
+    # Create validator for binary_sensor platform
+    validator = entity_duplicate_validator("binary_sensor")
+
+    # First Russian sensor should pass
+    config1 = {CONF_NAME: "Датчик открытия основного крана"}
+    validated1 = validator(config1)
+    assert validated1 == config1
+
+    # Second Russian sensor with different text but same ASCII conversion should fail
+    config2 = {CONF_NAME: "Датчик закрытия основного крана"}
+    with pytest.raises(
+        Invalid,
+        match=re.compile(
+            r"Duplicate binary_sensor entity with name 'Датчик закрытия основного крана' found.*"
+            r"Original names: 'Датчик закрытия основного крана' and 'Датчик открытия основного крана'.*"
+            r"Both convert to ASCII ID: '_______________________________'.*"
+            r"To fix: Add unique ASCII characters \(e\.g\., '1', '2', or 'A', 'B'\)",
+            re.DOTALL,
+        ),
+    ):
+        validator(config2)
+
+
+def test_entity_duplicate_validator_same_name_no_enhanced_message() -> None:
+    """Test that identical names don't show the enhanced message."""
+    # Create validator for sensor platform
+    validator = entity_duplicate_validator("sensor")
+
+    # First entity should pass
+    config1 = {CONF_NAME: "Temperature"}
+    validated1 = validator(config1)
+    assert validated1 == config1
+
+    # Second entity with exact same name should fail without enhanced message
+    config2 = {CONF_NAME: "Temperature"}
+    with pytest.raises(
+        Invalid,
+        match=r"Duplicate sensor entity with name 'Temperature' found.*"
+        r"Each entity on a device must have a unique name within its platform\.$",
+    ):
+        validator(config2)