mirror of
https://github.com/nasa/NASA-3D-Resources.git
synced 2025-01-19 06:10:46 +00:00
17 lines
1.0 KiB
Plaintext
17 lines
1.0 KiB
Plaintext
|
SOHO 3d print suggestions
|
|||
|
|
<EFBFBD> No support required
|
|||
|
|
<EFBFBD> STL files have been test printed at both 0.2mm and 0.1mm layer height
|
|||
|
|
<EFBFBD> (Optional) For added print quality use support material for SOHO_Part3
|
|||
|
|
<EFBFBD> ABS and PLA plastic filament have been tested successfully
|
|||
|
|
|
|||
|
|
Assembly
|
|||
|
|
1. Remove printed parts from print bed
|
|||
|
|
2. Clean up parts as necessary. Some printers may deposit extra material for the first layer that may need to be removed.
|
|||
|
|
3. Press fit SOHO_Part2 and SOHO_Part3. Use the two pins on the top of SOHO_Part2 as guides. Note, this should be a snug fit.
|
|||
|
|
4. If available, find a small segment of extra 1.75mm filament. Else skip to Step 9.
|
|||
|
|
5. Cut the 1.75mm filament into 4 small pieces around 10mm long.
|
|||
|
|
6. Press these segments into each of the 4 holes on the bottom surface of SOHO_Part1.
|
|||
|
|
7. Take SOHO_Part2 and match up the holes with the protruding filament in SOHO_Part1.
|
|||
|
|
8. Press fit SOHO_Part1 and SOHO_Part2 together.
|
|||
|
|
9. For extra support a dab of super glue can be used between SOHO_Part1 and SOHO_Part2
|