More consistent scoping in commands section in Manpages

tests/syntax-tests/highlighted/Manpage/sway.5.man

@@ -102,17 +102,17 @@
            short for client-side-decorations, which allows the client to draw
            its own decorations.
 
-       border toggle
+       border toggle
            Cycles through the available border styles.
 
-       exit
+       exit
            Exit sway and end your Wayland session.
 
        floating enable|disable|toggle
            Make focused view floating, non-floating, or the opposite of what
            it is now.
 
-       <criteria> focus
+       <criteria> focus
            Moves focus to the container that matches the specified criteria.
 
        focus up|right|down|left
@@ -124,10 +124,10 @@
            tainer will be focused. The sibling option indicates not to immedi‐
            ately focus a child of the container.
 
-       focus child
+       focus child
            Moves focus to the last-focused child of the focused container.
 
-       focus parent
+       focus parent
            Moves focus to the parent of the focused container.
 
        focus output up|right|down|left
@@ -136,13 +136,13 @@
        focus output <name>
            Moves focus to the named output.
 
-       focus tiling
+       focus tiling
            Sets focus to the last focused tiling container.
 
-       focus floating
+       focus floating
            Sets focus to the last focused floating container.
 
-       focus mode_toggle
+       focus mode_toggle
            Moves focus between the floating and tiled layers.
 
        fullscreen [enable|disable|toggle] [global]
@@ -152,7 +152,7 @@
            outputs.
 
        gaps inner|outer|horizontal|vertical|top|right|bottom|left all|current
-       set|plus|minus|toggle <amount>
+       set|plus|minus|toggle <amount>
            Changes the inner or outer gaps for either all workspaces or the
            current workspace. outer gaps can be altered per side with top,
            right, bottom, and left or per direction with horizontal and verti‐
@@ -189,7 +189,7 @@
            cles through every layout.
 
        layout toggle [split|tabbed|stacking|splitv|splith]
-       [split|tabbed|stacking|splitv|splith]...
+       [split|tabbed|stacking|splitv|splith]...
            Cycles the layout mode of the focused container through a list of
            layouts.
 
@@ -230,7 +230,7 @@
            the position is relative to all outputs. absolute can not be used
            with percentage points.
 
-       move [absolute] position center
+       move [absolute] position center
            Moves the focused container to be centered on the workspace. If ab‐
            solute is used, it is moved to the center of all outputs.
 
@@ -241,7 +241,7 @@
            Moves the focused container to the specified mark.
 
        move [--no-auto-back-and-forth] [container|window] [to] workspace [num‐
-       ber] <name>
+       ber] <name>
            Moves the focused container to the specified workspace. The string
            number is optional and is used to match a workspace with the same
            number, even if it has a different name.
@@ -288,14 +288,14 @@
            iour. The optional comment argument is ignored, but logged for de‐
            bugging purposes.
 
-       reload
+       reload
            Reloads the sway config file and applies any changes. The config
            file is located at path specified by the command line arguments
            when started, otherwise according to the priority stated in
            sway(1).
 
        rename workspace [<old_name>] to <new_name>
-           Rename either <old_name> or the focused workspace to the <new_name>
+           Rename either <old_name> or the focused workspace to the <new_name>
 
        resize shrink|grow width|height [<amount> [px|ppt]]
            Resizes the currently focused container by amount, specified in
@@ -322,7 +322,7 @@
            If width or height is 0, the container will not be resized on that
            axis.
 
-       scratchpad show
+       scratchpad show
            Shows a window from the scratchpad. Repeatedly using this command
            will cycle through the windows in the scratchpad.
 
@@ -344,13 +344,13 @@
            specified, the current container is split opposite to the parent
            container's layout.
 
-       splith
+       splith
            Equivalent to split horizontal
 
-       splitv
+       splitv
            Equivalent to split vertical
 
-       splitt
+       splitt
            Equivalent to split toggle
 
        sticky enable|disable|toggle
@@ -392,25 +392,25 @@
            The default format is "%title".
 
        The following commands may be used either in the configuration file or
-       at runtime.
+       at runtime.
 
        assign <criteria> [→] [workspace] [number] <workspace>
            Assigns views matching criteria (see CRITERIA for details) to
            workspace. The → (U+2192) is optional and cosmetic. This command is
            equivalent to:
 
-               for_window <criteria> move container to workspace <workspace>
+               for_window <criteria> move container to workspace <workspace>
 
        assign <criteria> [→] output left|right|up|down|<name>
            Assigns views matching criteria (see CRITERIA for details) to the
            specified output. The → (U+2192) is optional and cosmetic. This
            command is equivalent to:
 
-               for_window <criteria> move container to output <output>
+               for_window <criteria> move container to output <output>
 
-       bindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
-       [--locked] [--to-code] [--input-device=<device>] [--no-warn] [--no-re‐
-       peat] [Group<1-4>+]<key combo> <command>
+       bindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
+       [--locked] [--to-code] [--input-device=<device>] [--no-warn] [--no-re‐
+       peat] [Group<1-4>+]<key combo> <command>
            Binds key combo to execute the sway command command when pressed.
            You may use XKB key names here (wev(1) is a good tool for discover‐
            ing these). With the flag --release, the command is executed when
@@ -478,11 +478,11 @@
 
            bindcode [--whole-window] [--border] [--exclude-titlebar] [--re‐
            lease] [--locked] [--input-device=<device>] [--no-warn]
-           [Group<1-4>+]<code> <command> is also available for binding with
+           [Group<1-4>+]<code> <command> is also available for binding with
            key/button codes instead of key/button names.
 
        bindswitch [--locked] [--no-warn] [--reload] <switch>:<state> <command>
-           Binds <switch> to execute the sway command command on state
+           Binds <switch> to execute the sway command command on state
            changes. Supported switches are lid (laptop lid) and tablet (tablet
            mode) switches. Valid values for state are on, off and toggle.
            These switches are on when the device lid is shut and when tablet
@@ -511,7 +511,7 @@
                      bindswitch lid:toggle exec echo "Lid moved"
 
        bindgesture [--exact] [--input-device=<device>] [--no-warn] <ges‐
-       ture>[:<fingers>][:directions] <command>
+       ture>[:<fingers>][:directions] <command>
            Binds gesture to execute the sway command command when detected.
            Currently supports the hold, pinch or swipe gesture. Optionally can
            be limited to bind to a certain number of fingers or, for a pinch
@@ -561,10 +561,10 @@
                      bindgesture pinch:inward+left move left
                      bindgesture pinch:inward+right move right
 
-       client.background <color>
+       client.background <color>
            This command is ignored and is only present for i3 compatibility.
 
-       client.<class> <border> <background> <text> [<indicator> [<child_bor‐
+       client.<class> <border> <background> <text> [<indicator> [<child_bor‐
        der>]]
            Configures the color of window borders and title bars. The first
            three colors are required. When omitted indicator will use a sane
@@ -692,7 +692,7 @@
            to workspace, focus will wrap like in the yes case and additionally
            wrap when moving outside of workspaces boundaries. Default is yes.
 
-       font [pango:]<font>
+       font [pango:]<font>
            Sets font to use for the title bars. To enable support for pango
            markup, preface the font name with pango:. For example, monospace
            10 is the default font. To enable support for pango markup,
@@ -734,15 +734,15 @@
            bottom, and left or per direction with horizontal and vertical.
 
            This affects new workspaces only, and is used when the workspace
-           doesn't have its own gaps settings (see: workspace <ws> gaps ...).
+           doesn't have its own gaps settings (see: workspace <ws> gaps ...).
 
        hide_edge_borders [--i3] none|vertical|horizon‐
-       tal|both|smart|smart_no_gaps
+       tal|both|smart|smart_no_gaps
            Hides window borders adjacent to the screen edges. Default is none.
            The --i3 option enables i3-compatible behavior to hide the title
            bar on tabbed and stacked containers with one child. The
-           smart|smart_no_gaps options are equivalent to setting smart_borders
-           smart|no_gaps and hide_edge_borders none.
+           smart|smart_no_gaps options are equivalent to setting smart_borders
+           smart|no_gaps and hide_edge_borders none.
 
        input <input_device> <input-subcommands...>
            For details on input subcommands, see sway-input(5).
@@ -754,7 +754,7 @@
        seat <seat> <seat-subcommands...>
            For details on seat subcommands, see sway-input(5).
 
-       kill
+       kill
            Kills (closes) the currently focused container and all of its chil‐
            dren.
 
@@ -793,7 +793,7 @@
            output.
 
        no_focus <criteria>
-           Prevents windows matching <criteria> from being focused automati‐
+           Prevents windows matching <criteria> from being focused automati‐
            cally when they're created. This has no effect on the first window
            in a workspace.
 
@@ -849,25 +849,25 @@
            right side.
 
        unbindswitch <switch>:<state>
-           Removes a binding for when <switch> changes to <state>.
+           Removes a binding for when <switch> changes to <state>.
 
        unbindgesture [--exact] [--input-device=<device>] <gesture>[:<fin‐
        gers>][:directions]
            Removes a binding for the specified gesture, fingers and directions
            combination.
 
-       unbindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
-       [--locked] [--to-code] [--input-device=<device>] <key combo>
+       unbindsym [--whole-window] [--border] [--exclude-titlebar] [--release]
+       [--locked] [--to-code] [--input-device=<device>] <key combo>
            Removes the binding for key combo that was previously bound with
            the given flags.  If input-device is given, only the binding for
            that input device will be unbound.
 
            unbindcode [--whole-window] [--border] [--exclude-titlebar] [--re‐
-           lease] [--locked] [--input-device=<device>] <code> is also avail‐
+           lease] [--locked] [--input-device=<device>] <code> is also avail‐
            able for unbinding with key/button codes instead of key/button
            names.
 
-       unmark [<identifier>]
+       unmark [<identifier>]
            unmark will remove identifier from the list of current marks on a
            window. If identifier is omitted, all marks are removed.
 
@@ -898,11 +898,11 @@
        workspace prev_on_output|next_on_output
            Switches to the next workspace on the current output.
 
-       workspace back_and_forth
+       workspace back_and_forth
            Switches to the previously focused workspace.
 
        workspace <name> gaps inner|outer|horizontal|vertical|top|right|bot‐
-       tom|left <amount>
+       tom|left <amount>
            Specifies that workspace name should have the given gaps settings
            when it is created.